ixgbe: use netif_<level> instead of netdev_<level>

This patch restores the ability to set msglvl through ethtool.
The issue was introduced by:
commit 849c45423c0c108e08d67644728cc9b0ed225fa1

CC: Joe Perches <joe@perches.com>

Reported-by: Joe Perches <joe@perches.com>
Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ixgbe/ixgbe_82599.c

@@ -715,7 +715,7 @@ static s32 ixgbe_setup_mac_link_smartspeed(struct ixgbe_hw *hw,
 
 out:
 	if (link_up && (link_speed == IXGBE_LINK_SPEED_1GB_FULL))
-		e_info("Smartspeed has downgraded the link speed from "
+		e_info(hw, "Smartspeed has downgraded the link speed from "
 		       "the maximum advertised\n");
 	return status;
 }

drivers/net/ixgbe/ixgbe_common.h

@@ -108,16 +108,6 @@ s32 ixgbe_blink_led_stop_generic(struct ixgbe_hw *hw, u32 index);
 extern struct net_device *ixgbe_get_hw_dev(struct ixgbe_hw *hw);
 #define hw_dbg(hw, format, arg...) \
 	netdev_dbg(ixgbe_get_hw_dev(hw), format, ##arg)
-#define e_err(format, arg...) \
-	netdev_err(adapter->netdev, format, ## arg)
-#define e_info(format, arg...) \
-	netdev_info(adapter->netdev, format, ## arg)
-#define e_warn(format, arg...) \
-	netdev_warn(adapter->netdev, format, ## arg)
-#define e_notice(format, arg...) \
-	netdev_notice(adapter->netdev, format, ## arg)
-#define e_crit(format, arg...) \
-	netdev_crit(adapter->netdev, format, ## arg)
 #define e_dev_info(format, arg...) \
 	dev_info(&adapter->pdev->dev, format, ## arg)
 #define e_dev_warn(format, arg...) \
@@ -126,5 +116,12 @@ extern struct net_device *ixgbe_get_hw_dev(struct ixgbe_hw *hw);
 	dev_err(&adapter->pdev->dev, format, ## arg)
 #define e_dev_notice(format, arg...) \
 	dev_notice(&adapter->pdev->dev, format, ## arg)
-
+#define e_info(msglvl, format, arg...) \
+	netif_info(adapter, msglvl, adapter->netdev, format, ## arg)
+#define e_err(msglvl, format, arg...) \
+	netif_err(adapter, msglvl, adapter->netdev, format, ## arg)
+#define e_warn(msglvl, format, arg...) \
+	netif_warn(adapter, msglvl, adapter->netdev, format, ## arg)
+#define e_crit(msglvl, format, arg...) \
+	netif_crit(adapter, msglvl, adapter->netdev, format, ## arg)
 #endif /* IXGBE_COMMON */

drivers/net/ixgbe/ixgbe_dcb_nl.c

@@ -121,7 +121,7 @@ static u8 ixgbe_dcbnl_set_state(struct net_device *netdev, u8 state)
 			goto out;
 
 		if (!(adapter->flags & IXGBE_FLAG_MSIX_ENABLED)) {
-			e_err("Enable failed, needs MSI-X\n");
+			e_err(drv, "Enable failed, needs MSI-X\n");
 			err = 1;
 			goto out;
 		}

drivers/net/ixgbe/ixgbe_ethtool.c

@@ -301,7 +301,7 @@ static int ixgbe_set_settings(struct net_device *netdev,
 		hw->mac.autotry_restart = true;
 		err = hw->mac.ops.setup_link(hw, advertised, true, true);
 		if (err) {
-			e_info("setup link failed with code %d\n", err);
+			e_info(probe, "setup link failed with code %d\n", err);
 			hw->mac.ops.setup_link(hw, old, true, true);
 		}
 	} else {
@@ -1194,8 +1194,8 @@ static struct ixgbe_reg_test reg_test_82598[] = {
 		writel((_test[pat] & W), (adapter->hw.hw_addr + R));          \
 		val = readl(adapter->hw.hw_addr + R);                         \
 		if (val != (_test[pat] & W & M)) {                            \
-			e_err("pattern test reg %04X failed: got "	\
-			      "0x%08X expected 0x%08X\n",		\
+			e_err(drv, "pattern test reg %04X failed: got "   \
+			      "0x%08X expected 0x%08X\n",		      \
 			      R, val, (_test[pat] & W & M));                \
 			*data = R;                                            \
 			writel(before, adapter->hw.hw_addr + R);              \
@@ -1212,8 +1212,8 @@ static struct ixgbe_reg_test reg_test_82598[] = {
 	writel((W & M), (adapter->hw.hw_addr + R));                           \
 	val = readl(adapter->hw.hw_addr + R);                                 \
 	if ((W & M) != (val & M)) {                                           \
-		e_err("set/check reg %04X test failed: got 0x%08X "	\
-		      "expected 0x%08X\n", R, (val & M), (W & M));	\
+		e_err(drv, "set/check reg %04X test failed: got 0x%08X "  \
+		      "expected 0x%08X\n", R, (val & M), (W & M));        \
 		*data = R;                                                    \
 		writel(before, (adapter->hw.hw_addr + R));                    \
 		return 1;                                                     \
@@ -1246,8 +1246,8 @@ static int ixgbe_reg_test(struct ixgbe_adapter *adapter, u64 *data)
 	IXGBE_WRITE_REG(&adapter->hw, IXGBE_STATUS, toggle);
 	after = IXGBE_READ_REG(&adapter->hw, IXGBE_STATUS) & toggle;
 	if (value != after) {
-		e_err("failed STATUS register test got: 0x%08X expected: "
-		      "0x%08X\n", after, value);
+		e_err(drv, "failed STATUS register test got: 0x%08X "
+		      "expected: 0x%08X\n", after, value);
 		*data = 1;
 		return 1;
 	}
@@ -1347,8 +1347,8 @@ static int ixgbe_intr_test(struct ixgbe_adapter *adapter, u64 *data)
 		*data = 1;
 		return -1;
 	}
-	e_info("testing %s interrupt\n", shared_int ?
-		   "shared" : "unshared");
+	e_info(hw, "testing %s interrupt\n", shared_int ?
+	       "shared" : "unshared");
 
 	/* Disable all the interrupts */
 	IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMC, 0xFFFFFFFF);
@@ -1853,7 +1853,7 @@ static void ixgbe_diag_test(struct net_device *netdev,
 	if (eth_test->flags == ETH_TEST_FL_OFFLINE) {
 		/* Offline tests */
 
-		e_info("offline testing starting\n");
+		e_info(hw, "offline testing starting\n");
 
 		/* Link test performed before hardware reset so autoneg doesn't
 		 * interfere with test result */
@@ -1886,17 +1886,17 @@ static void ixgbe_diag_test(struct net_device *netdev,
 		else
 			ixgbe_reset(adapter);
 
-		e_info("register testing starting\n");
+		e_info(hw, "register testing starting\n");
 		if (ixgbe_reg_test(adapter, &data[0]))
 			eth_test->flags |= ETH_TEST_FL_FAILED;
 
 		ixgbe_reset(adapter);
-		e_info("eeprom testing starting\n");
+		e_info(hw, "eeprom testing starting\n");
 		if (ixgbe_eeprom_test(adapter, &data[1]))
 			eth_test->flags |= ETH_TEST_FL_FAILED;
 
 		ixgbe_reset(adapter);
-		e_info("interrupt testing starting\n");
+		e_info(hw, "interrupt testing starting\n");
 		if (ixgbe_intr_test(adapter, &data[2]))
 			eth_test->flags |= ETH_TEST_FL_FAILED;
 
@@ -1904,13 +1904,14 @@ static void ixgbe_diag_test(struct net_device *netdev,
 		 * loopback diagnostic. */
 		if (adapter->flags & (IXGBE_FLAG_SRIOV_ENABLED |
 				      IXGBE_FLAG_VMDQ_ENABLED)) {
-			e_info("Skip MAC loopback diagnostic in VT mode\n");
+			e_info(hw, "Skip MAC loopback diagnostic in VT "
+			       "mode\n");
 			data[3] = 0;
 			goto skip_loopback;
 		}
 
 		ixgbe_reset(adapter);
-		e_info("loopback testing starting\n");
+		e_info(hw, "loopback testing starting\n");
 		if (ixgbe_loopback_test(adapter, &data[3]))
 			eth_test->flags |= ETH_TEST_FL_FAILED;
 
@@ -1921,7 +1922,7 @@ skip_loopback:
 		if (if_running)
 			dev_open(netdev);
 	} else {
-		e_info("online testing starting\n");
+		e_info(hw, "online testing starting\n");
 		/* Online tests */
 		if (ixgbe_link_test(adapter, &data[4]))
 			eth_test->flags |= ETH_TEST_FL_FAILED;
@@ -2139,7 +2140,8 @@ static int ixgbe_set_coalesce(struct net_device *netdev,
 			adapter->flags2 &= ~IXGBE_FLAG2_RSC_ENABLED;
 			if (netdev->features & NETIF_F_LRO) {
 				netdev->features &= ~NETIF_F_LRO;
-				e_info("rx-usecs set to 0, disabling RSC\n");
+				e_info(probe, "rx-usecs set to 0, "
+				       "disabling RSC\n");
 			}
 			need_reset = true;
 		}
@@ -2239,8 +2241,8 @@ static int ixgbe_set_flags(struct net_device *netdev, u32 data)
 		} else if (!adapter->rx_itr_setting) {
 			netdev->features &= ~NETIF_F_LRO;
 			if (data & ETH_FLAG_LRO)
-				e_info("rx-usecs set to 0, "
-					"LRO/RSC cannot be enabled.\n");
+				e_info(probe, "rx-usecs set to 0, "
+				       "LRO/RSC cannot be enabled.\n");
 		}
 	}
 

drivers/net/ixgbe/ixgbe_fcoe.c

@@ -164,20 +164,20 @@ int ixgbe_fcoe_ddp_get(struct net_device *netdev, u16 xid,
 
 	adapter = netdev_priv(netdev);
 	if (xid >= IXGBE_FCOE_DDP_MAX) {
-		e_warn("xid=0x%x out-of-range\n", xid);
+		e_warn(drv, "xid=0x%x out-of-range\n", xid);
 		return 0;
 	}
 
 	fcoe = &adapter->fcoe;
 	if (!fcoe->pool) {
-		e_warn("xid=0x%x no ddp pool for fcoe\n", xid);
+		e_warn(drv, "xid=0x%x no ddp pool for fcoe\n", xid);
 		return 0;
 	}
 
 	ddp = &fcoe->ddp[xid];
 	if (ddp->sgl) {
-		e_err("xid 0x%x w/ non-null sgl=%p nents=%d\n",
-			  xid, ddp->sgl, ddp->sgc);
+		e_err(drv, "xid 0x%x w/ non-null sgl=%p nents=%d\n",
+		      xid, ddp->sgl, ddp->sgc);
 		return 0;
 	}
 	ixgbe_fcoe_clear_ddp(ddp);
@@ -185,14 +185,14 @@ int ixgbe_fcoe_ddp_get(struct net_device *netdev, u16 xid,
 	/* setup dma from scsi command sgl */
 	dmacount = pci_map_sg(adapter->pdev, sgl, sgc, DMA_FROM_DEVICE);
 	if (dmacount == 0) {
-		e_err("xid 0x%x DMA map error\n", xid);
+		e_err(drv, "xid 0x%x DMA map error\n", xid);
 		return 0;
 	}
 
 	/* alloc the udl from our ddp pool */
 	ddp->udl = pci_pool_alloc(fcoe->pool, GFP_KERNEL, &ddp->udp);
 	if (!ddp->udl) {
-		e_err("failed allocated ddp context\n");
+		e_err(drv, "failed allocated ddp context\n");
 		goto out_noddp_unmap;
 	}
 	ddp->sgl = sgl;
@@ -205,7 +205,7 @@ int ixgbe_fcoe_ddp_get(struct net_device *netdev, u16 xid,
 		while (len) {
 			/* max number of buffers allowed in one DDP context */
 			if (j >= IXGBE_BUFFCNT_MAX) {
-				e_err("xid=%x:%d,%d,%d:addr=%llx "
+				e_err(drv, "xid=%x:%d,%d,%d:addr=%llx "
 				      "not enough descriptors\n",
 				      xid, i, j, dmacount, (u64)addr);
 				goto out_noddp_free;
@@ -385,7 +385,7 @@ int ixgbe_fso(struct ixgbe_adapter *adapter,
 	struct fc_frame_header *fh;
 
 	if (skb_is_gso(skb) && (skb_shinfo(skb)->gso_type != SKB_GSO_FCOE)) {
-		e_err("Wrong gso type %d:expecting SKB_GSO_FCOE\n",
+		e_err(drv, "Wrong gso type %d:expecting SKB_GSO_FCOE\n",
 		      skb_shinfo(skb)->gso_type);
 		return -EINVAL;
 	}
@@ -412,7 +412,7 @@ int ixgbe_fso(struct ixgbe_adapter *adapter,
 		fcoe_sof_eof |= IXGBE_ADVTXD_FCOEF_SOF;
 		break;
 	default:
-		e_warn("unknown sof = 0x%x\n", sof);
+		e_warn(drv, "unknown sof = 0x%x\n", sof);
 		return -EINVAL;
 	}
 
@@ -439,7 +439,7 @@ int ixgbe_fso(struct ixgbe_adapter *adapter,
 		fcoe_sof_eof |= IXGBE_ADVTXD_FCOEF_EOF_A;
 		break;
 	default:
-		e_warn("unknown eof = 0x%x\n", eof);
+		e_warn(drv, "unknown eof = 0x%x\n", eof);
 		return -EINVAL;
 	}
 
@@ -515,7 +515,7 @@ void ixgbe_configure_fcoe(struct ixgbe_adapter *adapter)
 					     adapter->pdev, IXGBE_FCPTR_MAX,
 					     IXGBE_FCPTR_ALIGN, PAGE_SIZE);
 		if (!fcoe->pool)
-			e_err("failed to allocated FCoE DDP pool\n");
+			e_err(drv, "failed to allocated FCoE DDP pool\n");
 
 		spin_lock_init(&fcoe->lock);
 	}
@@ -611,7 +611,7 @@ int ixgbe_fcoe_enable(struct net_device *netdev)
 	if (adapter->flags & IXGBE_FLAG_FCOE_ENABLED)
 		goto out_enable;
 
-	e_info("Enabling FCoE offload features.\n");
+	e_info(drv, "Enabling FCoE offload features.\n");
 	if (netif_running(netdev))
 		netdev->netdev_ops->ndo_stop(netdev);
 
@@ -657,7 +657,7 @@ int ixgbe_fcoe_disable(struct net_device *netdev)
 	if (!(adapter->flags & IXGBE_FLAG_FCOE_ENABLED))
 		goto out_disable;
 
-	e_info("Disabling FCoE offload features.\n");
+	e_info(drv, "Disabling FCoE offload features.\n");
 	if (netif_running(netdev))
 		netdev->netdev_ops->ndo_stop(netdev);
 

drivers/net/ixgbe/ixgbe_main.c

@@ -696,7 +696,7 @@ static inline bool ixgbe_check_tx_hang(struct ixgbe_adapter *adapter,
 		/* detected Tx unit hang */
 		union ixgbe_adv_tx_desc *tx_desc;
 		tx_desc = IXGBE_TX_DESC_ADV(*tx_ring, eop);
-		e_err("Detected Tx Unit Hang\n"
+		e_err(drv, "Detected Tx Unit Hang\n"
 		      "  Tx Queue             <%d>\n"
 		      "  TDH, TDT             <%x>, <%x>\n"
 		      "  next_to_use          <%x>\n"
@@ -812,8 +812,8 @@ static bool ixgbe_clean_tx_irq(struct ixgbe_q_vector *q_vector,
 	if (adapter->detect_tx_hung) {
 		if (ixgbe_check_tx_hang(adapter, tx_ring, i)) {
 			/* schedule immediate reset if we believe we hung */
-			e_info("tx hang %d detected, resetting adapter\n",
-			       adapter->tx_timeout_count + 1);
+			e_info(probe, "tx hang %d detected, resetting "
+			       "adapter\n", adapter->tx_timeout_count + 1);
 			ixgbe_tx_timeout(adapter->netdev);
 		}
 	}
@@ -1652,8 +1652,8 @@ static void ixgbe_check_overtemp_task(struct work_struct *work)
 				return;
 			break;
 		}
-		e_crit("Network adapter has been stopped because it "
-		       "has over heated. Restart the computer. If the problem "
+		e_crit(drv, "Network adapter has been stopped because it has "
+		       "over heated. Restart the computer. If the problem "
 		       "persists, power off the system and replace the "
 		       "adapter\n");
 		/* write to clear the interrupt */
@@ -1667,7 +1667,7 @@ static void ixgbe_check_fan_failure(struct ixgbe_adapter *adapter, u32 eicr)
 
 	if ((adapter->flags & IXGBE_FLAG_FAN_FAIL_CAPABLE) &&
 	    (eicr & IXGBE_EICR_GPI_SDP1)) {
-		e_crit("Fan has stopped, replace the adapter\n");
+		e_crit(probe, "Fan has stopped, replace the adapter\n");
 		/* write to clear the interrupt */
 		IXGBE_WRITE_REG(hw, IXGBE_EICR, IXGBE_EICR_GPI_SDP1);
 	}
@@ -2153,7 +2153,7 @@ static int ixgbe_request_msix_irqs(struct ixgbe_adapter *adapter)
 		                  handler, 0, adapter->name[vector],
 		                  adapter->q_vector[vector]);
 		if (err) {
-			e_err("request_irq failed for MSIX interrupt: "
+			e_err(probe, "request_irq failed for MSIX interrupt "
 			      "Error: %d\n", err);
 			goto free_queue_irqs;
 		}
@@ -2163,7 +2163,7 @@ static int ixgbe_request_msix_irqs(struct ixgbe_adapter *adapter)
 	err = request_irq(adapter->msix_entries[vector].vector,
 	                  ixgbe_msix_lsc, 0, adapter->name[vector], netdev);
 	if (err) {
-		e_err("request_irq for msix_lsc failed: %d\n", err);
+		e_err(probe, "request_irq for msix_lsc failed: %d\n", err);
 		goto free_queue_irqs;
 	}
 
@@ -2349,7 +2349,7 @@ static int ixgbe_request_irq(struct ixgbe_adapter *adapter)
 	}
 
 	if (err)
-		e_err("request_irq failed, Error %d\n", err);
+		e_err(probe, "request_irq failed, Error %d\n", err);
 
 	return err;
 }
@@ -2420,7 +2420,7 @@ static void ixgbe_configure_msi_and_legacy(struct ixgbe_adapter *adapter)
 	map_vector_to_rxq(adapter, 0, 0);
 	map_vector_to_txq(adapter, 0, 0);
 
-	e_info("Legacy interrupt IVAR setup done\n");
+	e_info(hw, "Legacy interrupt IVAR setup done\n");
 }
 
 /**
@@ -3316,7 +3316,7 @@ static inline void ixgbe_rx_desc_queue_enable(struct ixgbe_adapter *adapter,
 			msleep(1);
 	}
 	if (k >= IXGBE_MAX_RX_DESC_POLL) {
-		e_err("RXDCTL.ENABLE on Rx queue %d not set within "
+		e_err(drv, "RXDCTL.ENABLE on Rx queue %d not set within "
 		      "the polling period\n", rxr);
 	}
 	ixgbe_release_rx_desc(&adapter->hw, adapter->rx_ring[rxr],
@@ -3446,7 +3446,7 @@ static int ixgbe_up_complete(struct ixgbe_adapter *adapter)
 			} while (--wait_loop &&
 			         !(txdctl & IXGBE_TXDCTL_ENABLE));
 			if (!wait_loop)
-				e_err("Could not enable Tx Queue %d\n", j);
+				e_err(drv, "Could not enable Tx Queue %d\n", j);
 		}
 	}
 
@@ -3494,7 +3494,7 @@ static int ixgbe_up_complete(struct ixgbe_adapter *adapter)
 	if (adapter->flags & IXGBE_FLAG_FAN_FAIL_CAPABLE) {
 		u32 esdp = IXGBE_READ_REG(hw, IXGBE_ESDP);
 		if (esdp & IXGBE_ESDP_SDP1)
-			e_crit("Fan has stopped, replace the adapter\n");
+			e_crit(drv, "Fan has stopped, replace the adapter\n");
 	}
 
 	/*
@@ -3523,7 +3523,7 @@ static int ixgbe_up_complete(struct ixgbe_adapter *adapter)
 	} else {
 		err = ixgbe_non_sfp_link_config(hw);
 		if (err)
-			e_err("link_config FAILED %d\n", err);
+			e_err(probe, "link_config FAILED %d\n", err);
 	}
 
 	for (i = 0; i < adapter->num_tx_queues; i++)
@@ -3977,12 +3977,12 @@ static inline bool ixgbe_set_fcoe_queues(struct ixgbe_adapter *adapter)
 		adapter->num_tx_queues = 1;
 #ifdef CONFIG_IXGBE_DCB
 		if (adapter->flags & IXGBE_FLAG_DCB_ENABLED) {
-			e_info("FCoE enabled with DCB\n");
+			e_info(probe, "FCoE enabled with DCB\n");
 			ixgbe_set_dcb_queues(adapter);
 		}
 #endif
 		if (adapter->flags & IXGBE_FLAG_RSS_ENABLED) {
-			e_info("FCoE enabled with RSS\n");
+			e_info(probe, "FCoE enabled with RSS\n");
 			if ((adapter->flags & IXGBE_FLAG_FDIR_HASH_CAPABLE) ||
 			    (adapter->flags & IXGBE_FLAG_FDIR_PERFECT_CAPABLE))
 				ixgbe_set_fdir_queues(adapter);
@@ -4633,8 +4633,8 @@ int ixgbe_init_interrupt_scheme(struct ixgbe_adapter *adapter)
 	}
 
 	e_dev_info("Multiqueue %s: Rx Queue count = %u, Tx Queue count = %u\n",
-	       (adapter->num_rx_queues > 1) ? "Enabled" : "Disabled",
-	       adapter->num_rx_queues, adapter->num_tx_queues);
+		   (adapter->num_rx_queues > 1) ? "Enabled" : "Disabled",
+		   adapter->num_rx_queues, adapter->num_tx_queues);
 
 	set_bit(__IXGBE_DOWN, &adapter->state);
 
@@ -4711,7 +4711,7 @@ static void ixgbe_sfp_task(struct work_struct *work)
 				  "supported module.\n");
 			unregister_netdev(adapter->netdev);
 		} else {
-			e_info("detected SFP+: %d\n", hw->phy.sfp_type);
+			e_info(probe, "detected SFP+: %d\n", hw->phy.sfp_type);
 		}
 		/* don't need this routine any more */
 		clear_bit(__IXGBE_SFP_MODULE_NOT_FOUND, &adapter->state);
@@ -4891,7 +4891,7 @@ int ixgbe_setup_tx_resources(struct ixgbe_adapter *adapter,
 err:
 	vfree(tx_ring->tx_buffer_info);
 	tx_ring->tx_buffer_info = NULL;
-	e_err("Unable to allocate memory for the Tx descriptor ring\n");
+	e_err(probe, "Unable to allocate memory for the Tx descriptor ring\n");
 	return -ENOMEM;
 }
 
@@ -4913,7 +4913,7 @@ static int ixgbe_setup_all_tx_resources(struct ixgbe_adapter *adapter)
 		err = ixgbe_setup_tx_resources(adapter, adapter->tx_ring[i]);
 		if (!err)
 			continue;
-		e_err("Allocation for Tx Queue %u failed\n", i);
+		e_err(probe, "Allocation for Tx Queue %u failed\n", i);
 		break;
 	}
 
@@ -4938,7 +4938,8 @@ int ixgbe_setup_rx_resources(struct ixgbe_adapter *adapter,
 	if (!rx_ring->rx_buffer_info)
 		rx_ring->rx_buffer_info = vmalloc(size);
 	if (!rx_ring->rx_buffer_info) {
-		e_err("vmalloc allocation failed for the Rx desc ring\n");
+		e_err(probe, "vmalloc allocation failed for the Rx "
+		      "descriptor ring\n");
 		goto alloc_failed;
 	}
 	memset(rx_ring->rx_buffer_info, 0, size);
@@ -4951,7 +4952,8 @@ int ixgbe_setup_rx_resources(struct ixgbe_adapter *adapter,
 					   &rx_ring->dma, GFP_KERNEL);
 
 	if (!rx_ring->desc) {
-		e_err("Memory allocation failed for the Rx desc ring\n");
+		e_err(probe, "Memory allocation failed for the Rx "
+		      "descriptor ring\n");
 		vfree(rx_ring->rx_buffer_info);
 		goto alloc_failed;
 	}
@@ -4984,7 +4986,7 @@ static int ixgbe_setup_all_rx_resources(struct ixgbe_adapter *adapter)
 		err = ixgbe_setup_rx_resources(adapter, adapter->rx_ring[i]);
 		if (!err)
 			continue;
-		e_err("Allocation for Rx Queue %u failed\n", i);
+		e_err(probe, "Allocation for Rx Queue %u failed\n", i);
 		break;
 	}
 
@@ -5083,7 +5085,7 @@ static int ixgbe_change_mtu(struct net_device *netdev, int new_mtu)
 	if ((new_mtu < 68) || (max_frame > IXGBE_MAX_JUMBO_FRAME_SIZE))
 		return -EINVAL;
 
-	e_info("changing MTU from %d to %d\n", netdev->mtu, new_mtu);
+	e_info(probe, "changing MTU from %d to %d\n", netdev->mtu, new_mtu);
 	/* must set new MTU before calling down or up */
 	netdev->mtu = new_mtu;
 
@@ -5597,7 +5599,7 @@ static void ixgbe_fdir_reinit_task(struct work_struct *work)
 			set_bit(__IXGBE_FDIR_INIT_DONE,
 			        &(adapter->tx_ring[i]->reinit_state));
 	} else {
-		e_err("failed to finish FDIR re-initialization, "
+		e_err(probe, "failed to finish FDIR re-initialization, "
 		      "ignored adding FDIR ATR filters\n");
 	}
 	/* Done FDIR Re-initialization, enable transmits */
@@ -5669,7 +5671,7 @@ static void ixgbe_watchdog_task(struct work_struct *work)
 				flow_tx = !!(rmcs & IXGBE_RMCS_TFCE_802_3X);
 			}
 
-			e_info("NIC Link is Up %s, Flow Control: %s\n",
+			e_info(drv, "NIC Link is Up %s, Flow Control: %s\n",
 			       (link_speed == IXGBE_LINK_SPEED_10GB_FULL ?
 			       "10 Gbps" :
 			       (link_speed == IXGBE_LINK_SPEED_1GB_FULL ?
@@ -5687,7 +5689,7 @@ static void ixgbe_watchdog_task(struct work_struct *work)
 		adapter->link_up = false;
 		adapter->link_speed = 0;
 		if (netif_carrier_ok(netdev)) {
-			e_info("NIC Link is Down\n");
+			e_info(drv, "NIC Link is Down\n");
 			netif_carrier_off(netdev);
 		}
 	}
@@ -5863,8 +5865,9 @@ static bool ixgbe_tx_csum(struct ixgbe_adapter *adapter,
 				break;
 			default:
 				if (unlikely(net_ratelimit())) {
-					e_warn("partial checksum but "
-					       "proto=%x!\n", skb->protocol);
+					e_warn(probe, "partial checksum "
+					       "but proto=%x!\n",
+					       skb->protocol);
 				}
 				break;
 			}
@@ -6472,7 +6475,7 @@ static void __devinit ixgbe_probe_vf(struct ixgbe_adapter *adapter,
 	adapter->flags |= IXGBE_FLAG_SRIOV_ENABLED;
 	err = pci_enable_sriov(adapter->pdev, adapter->num_vfs);
 	if (err) {
-		e_err("Failed to enable PCI sriov: %d\n", err);
+		e_err(probe, "Failed to enable PCI sriov: %d\n", err);
 		goto err_novfs;
 	}
 	/* If call to enable VFs succeeded then allocate memory
@@ -6496,8 +6499,8 @@ static void __devinit ixgbe_probe_vf(struct ixgbe_adapter *adapter,
 	}
 
 	/* Oh oh */
-	e_err("Unable to allocate memory for VF Data Storage - SRIOV "
-	      "disabled\n");
+	e_err(probe, "Unable to allocate memory for VF Data Storage - "
+	      "SRIOV disabled\n");
 	pci_disable_sriov(adapter->pdev);
 
 err_novfs:
@@ -6667,7 +6670,7 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev,
 	if (adapter->flags & IXGBE_FLAG_FAN_FAIL_CAPABLE) {
 		u32 esdp = IXGBE_READ_REG(hw, IXGBE_ESDP);
 		if (esdp & IXGBE_ESDP_SDP1)
-			e_crit("Fan has stopped, replace the adapter\n");
+			e_crit(probe, "Fan has stopped, replace the adapter\n");
 	}
 
 	/* reset_hw fills in the perm_addr as well */
@@ -6698,7 +6701,7 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev,
 
 	ixgbe_probe_vf(adapter, ii);
 
-	netdev->features =    NETIF_F_SG |
+	netdev->features = NETIF_F_SG |
 	                   NETIF_F_IP_CSUM |
 	                   NETIF_F_HW_VLAN_TX |
 	                   NETIF_F_HW_VLAN_RX |
@@ -6851,7 +6854,7 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev,
 	}
 #endif
 	if (adapter->flags & IXGBE_FLAG_SRIOV_ENABLED) {
-		e_info("IOV is enabled with %d VFs\n", adapter->num_vfs);
+		e_info(probe, "IOV is enabled with %d VFs\n", adapter->num_vfs);
 		for (i = 0; i < adapter->num_vfs; i++)
 			ixgbe_vf_configuration(pdev, (i | 0x10000000));
 	}
@@ -6999,7 +7002,7 @@ static pci_ers_result_t ixgbe_io_slot_reset(struct pci_dev *pdev)
 	int err;
 
 	if (pci_enable_device_mem(pdev)) {
-		e_err("Cannot re-enable PCI device after reset.\n");
+		e_err(probe, "Cannot re-enable PCI device after reset.\n");
 		result = PCI_ERS_RESULT_DISCONNECT;
 	} else {
 		pci_set_master(pdev);
@@ -7037,7 +7040,7 @@ static void ixgbe_io_resume(struct pci_dev *pdev)
 
 	if (netif_running(netdev)) {
 		if (ixgbe_up(adapter)) {
-			e_info("ixgbe_up failed after reset\n");
+			e_info(probe, "ixgbe_up failed after reset\n");
 			return;
 		}
 	}

drivers/net/ixgbe/ixgbe_sriov.c

@@ -185,7 +185,8 @@ int ixgbe_vf_configuration(struct pci_dev *pdev, unsigned int event_mask)
 
 	if (enable) {
 		random_ether_addr(vf_mac_addr);
-		e_info("IOV: VF %d is enabled MAC %pM\n", vfn, vf_mac_addr);
+		e_info(probe, "IOV: VF %d is enabled MAC %pM\n",
+		       vfn, vf_mac_addr);
 		/*
 		 * Store away the VF "permananet" MAC address, it will ask
 		 * for it later.
@@ -244,7 +245,7 @@ static int ixgbe_rcv_msg_from_vf(struct ixgbe_adapter *adapter, u32 vf)
 	if (msgbuf[0] == IXGBE_VF_RESET) {
 		unsigned char *vf_mac = adapter->vfinfo[vf].vf_mac_addresses;
 		u8 *addr = (u8 *)(&msgbuf[1]);
-		e_info("VF Reset msg received from vf %d\n", vf);
+		e_info(probe, "VF Reset msg received from vf %d\n", vf);
 		adapter->vfinfo[vf].clear_to_send = false;
 		ixgbe_vf_reset_msg(adapter, vf);
 		adapter->vfinfo[vf].clear_to_send = true;
@@ -297,7 +298,7 @@ static int ixgbe_rcv_msg_from_vf(struct ixgbe_adapter *adapter, u32 vf)
 		retval = ixgbe_set_vf_vlan(adapter, add, vid, vf);
 		break;
 	default:
-		e_err("Unhandled Msg %8.8x\n", msgbuf[0]);
+		e_err(drv, "Unhandled Msg %8.8x\n", msgbuf[0]);
 		retval = IXGBE_ERR_MBX;
 		break;
 	}