Merge branches 'for-32/i2c/nomadik', 'for-32/i2c/s3c2410-dt' and 'for-32/i2c/tegra-iomem' into for-linus/i2c-3.2

Documentation/devicetree/bindings/i2c/samsung-i2c.txt

@@ -0,0 +1,39 @@
+* Samsung's I2C controller
+
+The Samsung's I2C controller is used to interface with I2C devices.
+
+Required properties:
+  - compatible: value should be either of the following.
+      (a) "samsung, s3c2410-i2c", for i2c compatible with s3c2410 i2c.
+      (b) "samsung, s3c2440-i2c", for i2c compatible with s3c2440 i2c.
+  - reg: physical base address of the controller and length of memory mapped
+    region.
+  - interrupts: interrupt number to the cpu.
+  - samsung,i2c-sda-delay: Delay (in ns) applied to data line (SDA) edges.
+  - gpios: The order of the gpios should be the following: <SDA, SCL>.
+    The gpio specifier depends on the gpio controller.
+
+Optional properties:
+  - samsung,i2c-slave-addr: Slave address in multi-master enviroment. If not
+    specified, default value is 0.
+  - samsung,i2c-max-bus-freq: Desired frequency in Hz of the bus. If not
+    specified, the default value in Hz is 100000.
+
+Example:
+
+	i2c@13870000 {
+		compatible = "samsung,s3c2440-i2c";
+		reg = <0x13870000 0x100>;
+		interrupts = <345>;
+		samsung,i2c-sda-delay = <100>;
+		samsung,i2c-max-bus-freq = <100000>;
+		gpios = <&gpd1 2 0 /* SDA */
+			 &gpd1 3 0 /* SCL */>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		wm8994@1a {
+			compatible = "wlf,wm8994";
+			reg = <0x1a>;
+		};
+	};

drivers/i2c/busses/i2c-nomadik.c

@@ -63,11 +63,11 @@
 /* Master controller (MCR) register */
 #define I2C_MCR_OP		(0x1 << 0)	/* Operation */
 #define I2C_MCR_A7		(0x7f << 1)	/* 7-bit address */
-#define I2C_MCR_EA10		(0x7 << 8) 	/* 10-bit Extended address */
+#define I2C_MCR_EA10		(0x7 << 8)	/* 10-bit Extended address */
 #define I2C_MCR_SB		(0x1 << 11)	/* Extended address */
 #define I2C_MCR_AM		(0x3 << 12)	/* Address type */
-#define I2C_MCR_STOP		(0x1 << 14) 	/* Stop condition */
-#define I2C_MCR_LENGTH		(0x7ff << 15) 	/* Transaction length */
+#define I2C_MCR_STOP		(0x1 << 14)	/* Stop condition */
+#define I2C_MCR_LENGTH		(0x7ff << 15)	/* Transaction length */
 
 /* Status register (SR) */
 #define I2C_SR_OP		(0x3 << 0)	/* Operation */
@@ -77,7 +77,7 @@
 #define I2C_SR_LENGTH		(0x7ff << 9)	/* Transfer length */
 
 /* Interrupt mask set/clear (IMSCR) bits */
-#define I2C_IT_TXFE 		(0x1 << 0)
+#define I2C_IT_TXFE		(0x1 << 0)
 #define I2C_IT_TXFNE		(0x1 << 1)
 #define I2C_IT_TXFF		(0x1 << 2)
 #define I2C_IT_TXFOVR		(0x1 << 3)
@@ -135,31 +135,31 @@ struct i2c_nmk_client {
 };
 
 /**
- * struct nmk_i2c_dev - private data structure of the controller
- * @pdev: parent platform device
- * @adap: corresponding I2C adapter
- * @irq: interrupt line for the controller
- * @virtbase: virtual io memory area
- * @clk: hardware i2c block clock
- * @cfg: machine provided controller configuration
- * @cli: holder of client specific data
- * @stop: stop condition
- * @xfer_complete: acknowledge completion for a I2C message
- * @result: controller propogated result
- * @regulator: pointer to i2c regulator
- * @busy: Busy doing transfer
+ * struct nmk_i2c_dev - private data structure of the controller.
+ * @pdev: parent platform device.
+ * @adap: corresponding I2C adapter.
+ * @irq: interrupt line for the controller.
+ * @virtbase: virtual io memory area.
+ * @clk: hardware i2c block clock.
+ * @cfg: machine provided controller configuration.
+ * @cli: holder of client specific data.
+ * @stop: stop condition.
+ * @xfer_complete: acknowledge completion for a I2C message.
+ * @result: controller propogated result.
+ * @regulator: pointer to i2c regulator.
+ * @busy: Busy doing transfer.
  */
 struct nmk_i2c_dev {
 	struct platform_device		*pdev;
-	struct i2c_adapter 		adap;
-	int 				irq;
+	struct i2c_adapter		adap;
+	int				irq;
 	void __iomem			*virtbase;
 	struct clk			*clk;
 	struct nmk_i2c_controller	cfg;
 	struct i2c_nmk_client		cli;
-	int 				stop;
+	int				stop;
 	struct completion		xfer_complete;
-	int 				result;
+	int				result;
 	struct regulator		*regulator;
 	bool				busy;
 };
@@ -217,8 +217,9 @@ static int flush_i2c_fifo(struct nmk_i2c_dev *dev)
 		}
 	}
 
-	dev_err(&dev->pdev->dev, "flushing operation timed out "
-		"giving up after %d attempts", LOOP_ATTEMPTS);
+	dev_err(&dev->pdev->dev,
+		"flushing operation timed out giving up after %d attempts",
+		LOOP_ATTEMPTS);
 
 	return -ETIMEDOUT;
 }
@@ -270,7 +271,7 @@ exit:
 }
 
 /* enable peripheral, master mode operation */
-#define DEFAULT_I2C_REG_CR 	((1 << 1) | I2C_CR_PE)
+#define DEFAULT_I2C_REG_CR	((1 << 1) | I2C_CR_PE)
 
 /**
  * load_i2c_mcr_reg() - load the MCR register
@@ -363,8 +364,8 @@ static void setup_i2c_controller(struct nmk_i2c_dev *dev)
 	 * and high speed (up to 3.4 Mb/s)
 	 */
 	if (dev->cfg.sm > I2C_FREQ_MODE_FAST) {
-		dev_err(&dev->pdev->dev, "do not support this mode "
-			"defaulting to std. mode\n");
+		dev_err(&dev->pdev->dev,
+			"do not support this mode defaulting to std. mode\n");
 		brcr2 = i2c_clk/(100000 * 2) & 0xffff;
 		writel((brcr1 | brcr2), dev->virtbase + I2C_BRCR);
 		writel(I2C_FREQ_MODE_STANDARD << 4,
@@ -423,7 +424,7 @@ static int read_i2c(struct nmk_i2c_dev *dev)
 
 	if (timeout < 0) {
 		dev_err(&dev->pdev->dev,
-			"wait_for_completion_timeout"
+			"wait_for_completion_timeout "
 			"returned %d waiting for event\n", timeout);
 		status = timeout;
 	}
@@ -556,8 +557,8 @@ static int nmk_i2c_xfer_one(struct nmk_i2c_dev *dev, u16 flags)
 		if (((i2c_sr >> 2) & 0x3) == 0x3) {
 			/* get the abort cause */
 			cause =	(i2c_sr >> 4) & 0x7;
-			dev_err(&dev->pdev->dev, "%s\n", cause
-				>= ARRAY_SIZE(abort_causes) ?
+			dev_err(&dev->pdev->dev, "%s\n",
+				cause >= ARRAY_SIZE(abort_causes) ?
 				"unknown reason" :
 				abort_causes[cause]);
 		}
@@ -582,13 +583,13 @@ static int nmk_i2c_xfer_one(struct nmk_i2c_dev *dev, u16 flags)
  *
  * NOTE:
  * READ TRANSFER : We impose a restriction of the first message to be the
- * 		index message for any read transaction.
- * 		- a no index is coded as '0',
- * 		- 2byte big endian index is coded as '3'
- * 		!!! msg[0].buf holds the actual index.
- * 		This is compatible with generic messages of smbus emulator
- * 		that send a one byte index.
- * 		eg. a I2C transation to read 2 bytes from index 0
+ *		index message for any read transaction.
+ *		- a no index is coded as '0',
+ *		- 2byte big endian index is coded as '3'
+ *		!!! msg[0].buf holds the actual index.
+ *		This is compatible with generic messages of smbus emulator
+ *		that send a one byte index.
+ *		eg. a I2C transation to read 2 bytes from index 0
  *			idx = 0;
  *			msg[0].addr = client->addr;
  *			msg[0].flags = 0x0;
@@ -644,8 +645,8 @@ static int nmk_i2c_xfer(struct i2c_adapter *i2c_adap,
 
 		for (i = 0; i < num_msgs; i++) {
 			if (unlikely(msgs[i].flags & I2C_M_TEN)) {
-				dev_err(&dev->pdev->dev, "10 bit addressing"
-						"not supported\n");
+				dev_err(&dev->pdev->dev,
+					"10 bit addressing not supported\n");
 
 				status = -EINVAL;
 				goto out;
@@ -789,8 +790,9 @@ static irqreturn_t i2c_irq_handler(int irq, void *arg)
 
 		if (dev->cli.count) {
 			dev->result = -EIO;
-			dev_err(&dev->pdev->dev, "%lu bytes still remain to be"
-					"xfered\n", dev->cli.count);
+			dev_err(&dev->pdev->dev,
+				"%lu bytes still remain to be xfered\n",
+				dev->cli.count);
 			(void) init_hw(dev);
 		}
 		complete(&dev->xfer_complete);
@@ -923,7 +925,7 @@ static int __devinit nmk_i2c_probe(struct platform_device *pdev)
 	}
 
 	if (request_mem_region(res->start, resource_size(res),
-		DRIVER_NAME "I/O region") == 	NULL)	{
+		DRIVER_NAME "I/O region") == NULL) {
 		ret = -EBUSY;
 		goto err_no_region;
 	}
@@ -980,8 +982,9 @@ static int __devinit nmk_i2c_probe(struct platform_device *pdev)
 
 	i2c_set_adapdata(adap, dev);
 
-	dev_info(&pdev->dev, "initialize %s on virtual "
-		"base %p\n", adap->name, dev->virtbase);
+	dev_info(&pdev->dev,
+		 "initialize %s on virtual base %p\n",
+		 adap->name, dev->virtbase);
 
 	ret = i2c_add_numbered_adapter(adap);
 	if (ret) {

drivers/i2c/busses/i2c-s3c2410.c

@@ -35,6 +35,8 @@
 #include <linux/cpufreq.h>
 #include <linux/slab.h>
 #include <linux/io.h>
+#include <linux/of_i2c.h>
+#include <linux/of_gpio.h>
 
 #include <asm/irq.h>
 
@@ -78,6 +80,8 @@ struct s3c24xx_i2c {
 	struct resource		*ioarea;
 	struct i2c_adapter	adap;
 
+	struct s3c2410_platform_i2c	*pdata;
+	int			gpios[2];
 #ifdef CONFIG_CPU_FREQ
 	struct notifier_block	freq_transition;
 #endif
@@ -95,6 +99,12 @@ static inline int s3c24xx_i2c_is2440(struct s3c24xx_i2c *i2c)
 	struct platform_device *pdev = to_platform_device(i2c->dev);
 	enum s3c24xx_i2c_type type;
 
+#ifdef CONFIG_OF
+	if (i2c->dev->of_node)
+		return of_device_is_compatible(i2c->dev->of_node,
+				"samsung,s3c2440-i2c");
+#endif
+
 	type = platform_get_device_id(pdev)->driver_data;
 	return type == TYPE_S3C2440;
 }
@@ -625,7 +635,7 @@ static int s3c24xx_i2c_calcdivisor(unsigned long clkin, unsigned int wanted,
 
 static int s3c24xx_i2c_clockrate(struct s3c24xx_i2c *i2c, unsigned int *got)
 {
-	struct s3c2410_platform_i2c *pdata = i2c->dev->platform_data;
+	struct s3c2410_platform_i2c *pdata = i2c->pdata;
 	unsigned long clkin = clk_get_rate(i2c->clk);
 	unsigned int divs, div1;
 	unsigned long target_frequency;
@@ -741,6 +751,49 @@ static inline void s3c24xx_i2c_deregister_cpufreq(struct s3c24xx_i2c *i2c)
 }
 #endif
 
+#ifdef CONFIG_OF
+static int s3c24xx_i2c_parse_dt_gpio(struct s3c24xx_i2c *i2c)
+{
+	int idx, gpio, ret;
+
+	for (idx = 0; idx < 2; idx++) {
+		gpio = of_get_gpio(i2c->dev->of_node, idx);
+		if (!gpio_is_valid(gpio)) {
+			dev_err(i2c->dev, "invalid gpio[%d]: %d\n", idx, gpio);
+			goto free_gpio;
+		}
+
+		ret = gpio_request(gpio, "i2c-bus");
+		if (ret) {
+			dev_err(i2c->dev, "gpio [%d] request failed\n", gpio);
+			goto free_gpio;
+		}
+	}
+	return 0;
+
+free_gpio:
+	while (--idx >= 0)
+		gpio_free(i2c->gpios[idx]);
+	return -EINVAL;
+}
+
+static void s3c24xx_i2c_dt_gpio_free(struct s3c24xx_i2c *i2c)
+{
+	unsigned int idx;
+	for (idx = 0; idx < 2; idx++)
+		gpio_free(i2c->gpios[idx]);
+}
+#else
+static int s3c24xx_i2c_parse_dt_gpio(struct s3c24xx_i2c *i2c)
+{
+	return -EINVAL;
+}
+
+static void s3c24xx_i2c_dt_gpio_free(struct s3c24xx_i2c *i2c)
+{
+}
+#endif
+
 /* s3c24xx_i2c_init
  *
  * initialise the controller, set the IO lines and frequency
@@ -754,12 +807,15 @@ static int s3c24xx_i2c_init(struct s3c24xx_i2c *i2c)
 
 	/* get the plafrom data */
 
-	pdata = i2c->dev->platform_data;
+	pdata = i2c->pdata;
 
 	/* inititalise the gpio */
 
 	if (pdata->cfg_gpio)
 		pdata->cfg_gpio(to_platform_device(i2c->dev));
+	else
+		if (s3c24xx_i2c_parse_dt_gpio(i2c))
+			return -EINVAL;
 
 	/* write slave address */
 
@@ -785,6 +841,34 @@ static int s3c24xx_i2c_init(struct s3c24xx_i2c *i2c)
 	return 0;
 }
 
+#ifdef CONFIG_OF
+/* s3c24xx_i2c_parse_dt
+ *
+ * Parse the device tree node and retreive the platform data.
+*/
+
+static void
+s3c24xx_i2c_parse_dt(struct device_node *np, struct s3c24xx_i2c *i2c)
+{
+	struct s3c2410_platform_i2c *pdata = i2c->pdata;
+
+	if (!np)
+		return;
+
+	pdata->bus_num = -1; /* i2c bus number is dynamically assigned */
+	of_property_read_u32(np, "samsung,i2c-sda-delay", &pdata->sda_delay);
+	of_property_read_u32(np, "samsung,i2c-slave-addr", &pdata->slave_addr);
+	of_property_read_u32(np, "samsung,i2c-max-bus-freq",
+				(u32 *)&pdata->frequency);
+}
+#else
+static void
+s3c24xx_i2c_parse_dt(struct device_node *np, struct s3c24xx_i2c *i2c)
+{
+	return;
+}
+#endif
+
 /* s3c24xx_i2c_probe
  *
  * called by the bus driver when a suitable device is found
@@ -793,14 +877,16 @@ static int s3c24xx_i2c_init(struct s3c24xx_i2c *i2c)
 static int s3c24xx_i2c_probe(struct platform_device *pdev)
 {
 	struct s3c24xx_i2c *i2c;
-	struct s3c2410_platform_i2c *pdata;
+	struct s3c2410_platform_i2c *pdata = NULL;
 	struct resource *res;
 	int ret;
 
-	pdata = pdev->dev.platform_data;
-	if (!pdata) {
-		dev_err(&pdev->dev, "no platform data\n");
-		return -EINVAL;
+	if (!pdev->dev.of_node) {
+		pdata = pdev->dev.platform_data;
+		if (!pdata) {
+			dev_err(&pdev->dev, "no platform data\n");
+			return -EINVAL;
+		}
 	}
 
 	i2c = kzalloc(sizeof(struct s3c24xx_i2c), GFP_KERNEL);
@@ -809,6 +895,17 @@ static int s3c24xx_i2c_probe(struct platform_device *pdev)
 		return -ENOMEM;
 	}
 
+	i2c->pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
+	if (!i2c->pdata) {
+		ret = -ENOMEM;
+		goto err_noclk;
+	}
+
+	if (pdata)
+		memcpy(i2c->pdata, pdata, sizeof(*pdata));
+	else
+		s3c24xx_i2c_parse_dt(pdev->dev.of_node, i2c);
+
 	strlcpy(i2c->adap.name, "s3c2410-i2c", sizeof(i2c->adap.name));
 	i2c->adap.owner   = THIS_MODULE;
 	i2c->adap.algo    = &s3c24xx_i2c_algorithm;
@@ -903,7 +1000,8 @@ static int s3c24xx_i2c_probe(struct platform_device *pdev)
 	 * being bus 0.
 	 */
 
-	i2c->adap.nr = pdata->bus_num;
+	i2c->adap.nr = i2c->pdata->bus_num;
+	i2c->adap.dev.of_node = pdev->dev.of_node;
 
 	ret = i2c_add_numbered_adapter(&i2c->adap);
 	if (ret < 0) {
@@ -911,6 +1009,7 @@ static int s3c24xx_i2c_probe(struct platform_device *pdev)
 		goto err_cpufreq;
 	}
 
+	of_i2c_register_devices(&i2c->adap);
 	platform_set_drvdata(pdev, i2c);
 
 	dev_info(&pdev->dev, "%s: S3C I2C adapter\n", dev_name(&i2c->adap.dev));
@@ -959,6 +1058,7 @@ static int s3c24xx_i2c_remove(struct platform_device *pdev)
 	iounmap(i2c->regs);
 
 	release_resource(i2c->ioarea);
+	s3c24xx_i2c_dt_gpio_free(i2c);
 	kfree(i2c->ioarea);
 	kfree(i2c);
 
@@ -1012,6 +1112,17 @@ static struct platform_device_id s3c24xx_driver_ids[] = {
 };
 MODULE_DEVICE_TABLE(platform, s3c24xx_driver_ids);
 
+#ifdef CONFIG_OF
+static const struct of_device_id s3c24xx_i2c_match[] = {
+	{ .compatible = "samsung,s3c2410-i2c" },
+	{ .compatible = "samsung,s3c2440-i2c" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, s3c24xx_i2c_match);
+#else
+#define s3c24xx_i2c_match NULL
+#endif
+
 static struct platform_driver s3c24xx_i2c_driver = {
 	.probe		= s3c24xx_i2c_probe,
 	.remove		= s3c24xx_i2c_remove,
@@ -1020,6 +1131,7 @@ static struct platform_driver s3c24xx_i2c_driver = {
 		.owner	= THIS_MODULE,
 		.name	= "s3c-i2c",
 		.pm	= S3C24XX_DEV_PM_OPS,
+		.of_match_table = s3c24xx_i2c_match,
 	},
 };
 

drivers/i2c/busses/i2c-tegra.c

@@ -566,7 +566,7 @@ static int tegra_i2c_probe(struct platform_device *pdev)
 	struct clk *clk;
 	struct clk *i2c_clk;
 	const unsigned int *prop;
-	void *base;
+	void __iomem *base;
 	int irq;
 	int ret = 0;