RealView: Move more device address definitions to board-eb.h

The upcoming PB11MPCore and PB1176 have different memory maps and some
of the definitions in platform.h are no longer common. This patch
moves them to the board-eb.h file and updates their usage in
realview_eb.c.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

arch/arm/mach-realview/realview_eb.c

@@ -136,12 +136,12 @@ static void __init realview_eb_map_io(void)
 /*
  * These devices are connected directly to the multi-layer AHB switch
  */
-#define SMC_IRQ		{ NO_IRQ, NO_IRQ }
-#define SMC_DMA		{ 0, 0 }
+#define EB_SMC_IRQ	{ NO_IRQ, NO_IRQ }
+#define EB_SMC_DMA	{ 0, 0 }
 #define MPMC_IRQ	{ NO_IRQ, NO_IRQ }
 #define MPMC_DMA	{ 0, 0 }
-#define CLCD_IRQ	{ IRQ_EB_CLCD, NO_IRQ }
-#define CLCD_DMA	{ 0, 0 }
+#define EB_CLCD_IRQ	{ IRQ_EB_CLCD, NO_IRQ }
+#define EB_CLCD_DMA	{ 0, 0 }
 #define DMAC_IRQ	{ IRQ_EB_DMA, NO_IRQ }
 #define DMAC_DMA	{ 0, 0 }
 
@@ -150,14 +150,14 @@ static void __init realview_eb_map_io(void)
  */
 #define SCTL_IRQ	{ NO_IRQ, NO_IRQ }
 #define SCTL_DMA	{ 0, 0 }
-#define WATCHDOG_IRQ	{ IRQ_EB_WDOG, NO_IRQ }
-#define WATCHDOG_DMA	{ 0, 0 }
-#define GPIO0_IRQ	{ IRQ_EB_GPIO0, NO_IRQ }
-#define GPIO0_DMA	{ 0, 0 }
+#define EB_WATCHDOG_IRQ	{ IRQ_EB_WDOG, NO_IRQ }
+#define EB_WATCHDOG_DMA	{ 0, 0 }
+#define EB_GPIO0_IRQ	{ IRQ_EB_GPIO0, NO_IRQ }
+#define EB_GPIO0_DMA	{ 0, 0 }
 #define GPIO1_IRQ	{ IRQ_EB_GPIO1, NO_IRQ }
 #define GPIO1_DMA	{ 0, 0 }
-#define RTC_IRQ		{ IRQ_EB_RTC, NO_IRQ }
-#define RTC_DMA		{ 0, 0 }
+#define EB_RTC_IRQ	{ IRQ_EB_RTC, NO_IRQ }
+#define EB_RTC_DMA	{ 0, 0 }
 
 /*
  * These devices are connected via the DMA APB bridge
@@ -172,8 +172,8 @@ static void __init realview_eb_map_io(void)
 #define EB_UART2_DMA	{ 11, 10 }
 #define EB_UART3_IRQ	{ IRQ_EB_UART3, NO_IRQ }
 #define EB_UART3_DMA	{ 0x86, 0x87 }
-#define SSP_IRQ		{ IRQ_EB_SSP, NO_IRQ }
-#define SSP_DMA		{ 9, 8 }
+#define EB_SSP_IRQ	{ IRQ_EB_SSP, NO_IRQ }
+#define EB_SSP_DMA	{ 9, 8 }
 
 /* FPGA Primecells */
 AMBA_DEVICE(aaci,  "fpga:04", AACI,     NULL);
@@ -183,20 +183,20 @@ AMBA_DEVICE(kmi1,  "fpga:07", KMI1,     NULL);
 AMBA_DEVICE(uart3, "fpga:09", EB_UART3, NULL);
 
 /* DevChip Primecells */
-AMBA_DEVICE(smc,   "dev:00",  SMC,      NULL);
-AMBA_DEVICE(clcd,  "dev:20",  CLCD,     &clcd_plat_data);
+AMBA_DEVICE(smc,   "dev:00",  EB_SMC,   NULL);
+AMBA_DEVICE(clcd,  "dev:20",  EB_CLCD,  &clcd_plat_data);
 AMBA_DEVICE(dmac,  "dev:30",  DMAC,     NULL);
 AMBA_DEVICE(sctl,  "dev:e0",  SCTL,     NULL);
-AMBA_DEVICE(wdog,  "dev:e1",  WATCHDOG, NULL);
-AMBA_DEVICE(gpio0, "dev:e4",  GPIO0,    NULL);
+AMBA_DEVICE(wdog,  "dev:e1",  EB_WATCHDOG, NULL);
+AMBA_DEVICE(gpio0, "dev:e4",  EB_GPIO0, NULL);
 AMBA_DEVICE(gpio1, "dev:e5",  GPIO1,    NULL);
 AMBA_DEVICE(gpio2, "dev:e6",  GPIO2,    NULL);
-AMBA_DEVICE(rtc,   "dev:e8",  RTC,      NULL);
+AMBA_DEVICE(rtc,   "dev:e8",  EB_RTC,   NULL);
 AMBA_DEVICE(sci0,  "dev:f0",  SCI,      NULL);
 AMBA_DEVICE(uart0, "dev:f1",  EB_UART0, NULL);
 AMBA_DEVICE(uart1, "dev:f2",  EB_UART1, NULL);
 AMBA_DEVICE(uart2, "dev:f3",  EB_UART2, NULL);
-AMBA_DEVICE(ssp0,  "dev:f4",  SSP,      NULL);
+AMBA_DEVICE(ssp0,  "dev:f4",  EB_SSP,   NULL);
 
 static struct amba_device *amba_devs[] __initdata = {
 	&dmac_device,
@@ -231,8 +231,8 @@ static struct resource realview_eb_flash_resource = {
 
 static struct resource realview_eb_eth_resources[] = {
 	[0] = {
-		.start		= REALVIEW_ETH_BASE,
-		.end		= REALVIEW_ETH_BASE + SZ_64K - 1,
+		.start		= REALVIEW_EB_ETH_BASE,
+		.end		= REALVIEW_EB_ETH_BASE + SZ_64K - 1,
 		.flags		= IORESOURCE_MEM,
 	},
 	[1] = {
@@ -254,7 +254,7 @@ static struct platform_device realview_eb_eth_device = {
  */
 static int eth_device_register(void)
 {
-	void __iomem *eth_addr = ioremap(REALVIEW_ETH_BASE, SZ_4K);
+	void __iomem *eth_addr = ioremap(REALVIEW_EB_ETH_BASE, SZ_4K);
 	u32 idrev;
 
 	if (!eth_addr)

include/asm-arm/arch-realview/board-eb.h

@@ -30,13 +30,21 @@
 #define REALVIEW_EB_UART1_BASE		0x1000A000	/* UART 1 */
 #define REALVIEW_EB_UART2_BASE		0x1000B000	/* UART 2 */
 #define REALVIEW_EB_UART3_BASE		0x1000C000	/* UART 3 */
+#define REALVIEW_EB_SSP_BASE		0x1000D000	/* Synchronous Serial Port */
+#define REALVIEW_EB_WATCHDOG_BASE	0x10010000	/* watchdog interface */
 #define REALVIEW_EB_TIMER0_1_BASE	0x10011000	/* Timer 0 and 1 */
 #define REALVIEW_EB_TIMER2_3_BASE	0x10012000	/* Timer 2 and 3 */
+#define REALVIEW_EB_GPIO0_BASE		0x10013000	/* GPIO port 0 */
+#define REALVIEW_EB_RTC_BASE		0x10017000	/* Real Time Clock */
+#define REALVIEW_EB_CLCD_BASE		0x10020000	/* CLCD */
 #define REALVIEW_EB_GIC_CPU_BASE	0x10040000	/* Generic interrupt controller CPU interface */
 #define REALVIEW_EB_GIC_DIST_BASE	0x10041000	/* Generic interrupt controller distributor */
+#define REALVIEW_EB_SMC_BASE		0x10080000	/* Static memory controller */
 
 #define REALVIEW_EB_FLASH_BASE		0x40000000
 #define REALVIEW_EB_FLASH_SIZE		SZ_64M
+#define REALVIEW_EB_ETH_BASE		0x4E000000	/* Ethernet */
+#define REALVIEW_EB_USB_BASE		0x4F000000	/* USB */
 
 #ifdef CONFIG_REALVIEW_EB_ARM11MP_REVB
 #define REALVIEW_EB11MP_SCU_BASE	0x10100000	/* SCU registers */

include/asm-arm/arch-realview/platform.h

@@ -172,34 +172,20 @@
 #define REALVIEW_INTREG_CARDINSERT   0x03    /* Signal insertion of MMC card                   */
 
 /*
- * REALVIEW peripheral addresses
+ * RealView common peripheral addresses
  */
 #define REALVIEW_SCTL_BASE            0x10001000	/* System controller */
 #define REALVIEW_I2C_BASE             0x10002000	/* I2C control */
-	/* Reserved 0x10003000 */
 #define REALVIEW_AACI_BASE            0x10004000	/* Audio */
 #define REALVIEW_MMCI0_BASE           0x10005000	/* MMC interface */
 #define REALVIEW_KMI0_BASE            0x10006000	/* KMI interface */
 #define REALVIEW_KMI1_BASE            0x10007000	/* KMI 2nd interface */
 #define REALVIEW_CHAR_LCD_BASE        0x10008000	/* Character LCD */
-#define REALVIEW_SSP_BASE             0x1000D000	/* Synchronous Serial Port */
 #define REALVIEW_SCI_BASE             0x1000E000	/* Smart card controller */
-	/* Reserved 0x1000F000 */
-#define REALVIEW_WATCHDOG_BASE        0x10010000	/* watchdog interface */
-#define REALVIEW_GPIO0_BASE           0x10013000	/* GPIO port 0 */
 #define REALVIEW_GPIO1_BASE           0x10014000	/* GPIO port 1 */
 #define REALVIEW_GPIO2_BASE           0x10015000	/* GPIO port 2 */
-	/* Reserved 0x10016000 */
-#define REALVIEW_RTC_BASE             0x10017000	/* Real Time Clock */
 #define REALVIEW_DMC_BASE             0x10018000	/* DMC configuration */
-#define REALVIEW_PCI_CORE_BASE        0x10019000	/* PCI configuration */
-	/* Reserved 0x1001A000 - 0x1001FFFF */
-#define REALVIEW_CLCD_BASE            0x10020000	/* CLCD */
 #define REALVIEW_DMAC_BASE            0x10030000	/* DMA controller */
-#define REALVIEW_SMC_BASE             0x10080000	/* SMC */
-	/* Reserved 0x10090000 - 0x100EFFFF */
-
-#define REALVIEW_ETH_BASE             0x4E000000	/* Ethernet */
 
 /* PCI space */
 #define REALVIEW_PCI_BASE             0x41000000	/* PCI Interface */