Merge branches 'regmap-core', 'regmap-irq' and 'regmap-page' into regmap-next

Conflicts (trivial context stuff):
	drivers/base/regmap/regmap.c
	include/linux/regmap.h

Documentation/devicetree/bindings/i2c/i2c-mux-pinctrl.txt

@@ -0,0 +1,93 @@
+Pinctrl-based I2C Bus Mux
+
+This binding describes an I2C bus multiplexer that uses pin multiplexing to
+route the I2C signals, and represents the pin multiplexing configuration
+using the pinctrl device tree bindings.
+
+                                 +-----+  +-----+
+                                 | dev |  | dev |
+    +------------------------+   +-----+  +-----+
+    | SoC                    |      |        |
+    |                   /----|------+--------+
+    |   +---+   +------+     | child bus A, on first set of pins
+    |   |I2C|---|Pinmux|     |
+    |   +---+   +------+     | child bus B, on second set of pins
+    |                   \----|------+--------+--------+
+    |                        |      |        |        |
+    +------------------------+  +-----+  +-----+  +-----+
+                                | dev |  | dev |  | dev |
+                                +-----+  +-----+  +-----+
+
+Required properties:
+- compatible: i2c-mux-pinctrl
+- i2c-parent: The phandle of the I2C bus that this multiplexer's master-side
+  port is connected to.
+
+Also required are:
+
+* Standard pinctrl properties that specify the pin mux state for each child
+  bus. See ../pinctrl/pinctrl-bindings.txt.
+
+* Standard I2C mux properties. See mux.txt in this directory.
+
+* I2C child bus nodes. See mux.txt in this directory.
+
+For each named state defined in the pinctrl-names property, an I2C child bus
+will be created. I2C child bus numbers are assigned based on the index into
+the pinctrl-names property.
+
+The only exception is that no bus will be created for a state named "idle". If
+such a state is defined, it must be the last entry in pinctrl-names. For
+example:
+
+	pinctrl-names = "ddc", "pta", "idle"  ->  ddc = bus 0, pta = bus 1
+	pinctrl-names = "ddc", "idle", "pta"  ->  Invalid ("idle" not last)
+	pinctrl-names = "idle", "ddc", "pta"  ->  Invalid ("idle" not last)
+
+Whenever an access is made to a device on a child bus, the relevant pinctrl
+state will be programmed into hardware.
+
+If an idle state is defined, whenever an access is not being made to a device
+on a child bus, the idle pinctrl state will be programmed into hardware.
+
+If an idle state is not defined, the most recently used pinctrl state will be
+left programmed into hardware whenever no access is being made of a device on
+a child bus.
+
+Example:
+
+	i2cmux {
+		compatible = "i2c-mux-pinctrl";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c-parent = <&i2c1>;
+
+		pinctrl-names = "ddc", "pta", "idle";
+		pinctrl-0 = <&state_i2cmux_ddc>;
+		pinctrl-1 = <&state_i2cmux_pta>;
+		pinctrl-2 = <&state_i2cmux_idle>;
+
+		i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom {
+				compatible = "eeprom";
+				reg = <0x50>;
+			};
+		};
+
+		i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom {
+				compatible = "eeprom";
+				reg = <0x50>;
+			};
+		};
+	};
+

Documentation/kernel-parameters.txt

@@ -2543,6 +2543,15 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 
 	sched_debug	[KNL] Enables verbose scheduler debug messages.
 
+	skew_tick=	[KNL] Offset the periodic timer tick per cpu to mitigate
+			xtime_lock contention on larger systems, and/or RCU lock
+			contention on all systems with CONFIG_MAXSMP set.
+			Format: { "0" | "1" }
+			0 -- disable. (may be 1 via CONFIG_CMDLINE="skew_tick=1"
+			1 -- enable.
+			Note: increases power consumption, thus should only be
+			enabled if running jitter sensitive (HPC/RT) workloads.
+
 	security=	[SECURITY] Choose a security module to enable at boot.
 			If this boot parameter is not specified, only the first
 			security module asking for security registration will be

Documentation/networking/stmmac.txt

@@ -10,8 +10,8 @@ Currently this network device driver is for all STM embedded MAC/GMAC
 (i.e. 7xxx/5xxx SoCs), SPEAr (arm), Loongson1B (mips) and XLINX XC2V3000
 FF1152AMT0221 D1215994A VIRTEX FPGA board.
 
-DWC Ether MAC 10/100/1000 Universal version 3.60a (and older) and DWC Ether MAC 10/100
-Universal version 4.0 have been used for developing this driver.
+DWC Ether MAC 10/100/1000 Universal version 3.60a (and older) and DWC Ether
+MAC 10/100 Universal version 4.0 have been used for developing this driver.
 
 This driver supports both the platform bus and PCI.
 
@@ -54,27 +54,27 @@ net_device structure enabling the scatter/gather feature.
 When one or more packets are received, an interrupt happens. The interrupts
 are not queued so the driver has to scan all the descriptors in the ring during
 the receive process.
-This is based on NAPI so the interrupt handler signals only if there is work to be
-done, and it exits.
+This is based on NAPI so the interrupt handler signals only if there is work
+to be done, and it exits.
 Then the poll method will be scheduled at some future point.
 The incoming packets are stored, by the DMA, in a list of pre-allocated socket
 buffers in order to avoid the memcpy (Zero-copy).
 
 4.3) Timer-Driver Interrupt
-Instead of having the device that asynchronously notifies the frame receptions, the
-driver configures a timer to generate an interrupt at regular intervals.
-Based on the granularity of the timer, the frames that are received by the device
-will experience different levels of latency. Some NICs have dedicated timer
-device to perform this task. STMMAC can use either the RTC device or the TMU
-channel 2  on STLinux platforms.
+Instead of having the device that asynchronously notifies the frame receptions,
+the driver configures a timer to generate an interrupt at regular intervals.
+Based on the granularity of the timer, the frames that are received by the
+device will experience different levels of latency. Some NICs have dedicated
+timer device to perform this task. STMMAC can use either the RTC device or the
+TMU channel 2  on STLinux platforms.
 The timers frequency can be passed to the driver as parameter; when change it,
 take care of both hardware capability and network stability/performance impact.
-Several performance tests on STM platforms showed this optimisation allows to spare
-the CPU while having the maximum throughput.
+Several performance tests on STM platforms showed this optimisation allows to
+spare the CPU while having the maximum throughput.
 
 4.4) WOL
-Wake up on Lan feature through Magic and Unicast frames are supported for the GMAC
-core.
+Wake up on Lan feature through Magic and Unicast frames are supported for the
+GMAC core.
 
 4.5) DMA descriptors
 Driver handles both normal and enhanced descriptors. The latter has been only
@@ -106,7 +106,8 @@ Several driver's information can be passed through the platform
 These are included in the include/linux/stmmac.h header file
 and detailed below as well:
 
- struct plat_stmmacenet_data {
+struct plat_stmmacenet_data {
+	char *phy_bus_name;
 	int bus_id;
 	int phy_addr;
 	int interface;
@@ -124,19 +125,24 @@ and detailed below as well:
 	void (*bus_setup)(void __iomem *ioaddr);
 	int (*init)(struct platform_device *pdev);
 	void (*exit)(struct platform_device *pdev);
+	void *custom_cfg;
+	void *custom_data;
 	void *bsp_priv;
  };
 
 Where:
+ o phy_bus_name: phy bus name to attach to the stmmac.
  o bus_id: bus identifier.
  o phy_addr: the physical address can be passed from the platform.
 	    If it is set to -1 the driver will automatically
 	    detect it at run-time by probing all the 32 addresses.
  o interface: PHY device's interface.
  o mdio_bus_data: specific platform fields for the MDIO bus.
- o pbl: the Programmable Burst Length is maximum number of beats to
+ o dma_cfg: internal DMA parameters
+   o pbl: the Programmable Burst Length is maximum number of beats to
        be transferred in one DMA transaction.
        GMAC also enables the 4xPBL by default.
+   o fixed_burst/mixed_burst/burst_len
  o clk_csr: fixed CSR Clock range selection.
  o has_gmac: uses the GMAC core.
  o enh_desc: if sets the MAC will use the enhanced descriptor structure.
@@ -160,8 +166,9 @@ Where:
 	     this is sometime necessary on some platforms (e.g. ST boxes)
 	     where the HW needs to have set some PIO lines or system cfg
 	     registers.
- o custom_cfg: this is a custom configuration that can be passed while
-	      initialising the resources.
+ o custom_cfg/custom_data: this is a custom configuration that can be passed
+			   while initialising the resources.
+ o bsp_priv: another private poiter.
 
 For MDIO bus The we have:
 
@@ -180,7 +187,6 @@ Where:
  o irqs: list of IRQs, one per PHY.
  o probed_phy_irq: if irqs is NULL, use this for probed PHY.
 
-
 For DMA engine we have the following internal fields that should be
 tuned according to the HW capabilities.
 

Documentation/vm/frontswap.txt

@@ -0,0 +1,278 @@
+Frontswap provides a "transcendent memory" interface for swap pages.
+In some environments, dramatic performance savings may be obtained because
+swapped pages are saved in RAM (or a RAM-like device) instead of a swap disk.
+
+(Note, frontswap -- and cleancache (merged at 3.0) -- are the "frontends"
+and the only necessary changes to the core kernel for transcendent memory;
+all other supporting code -- the "backends" -- is implemented as drivers.
+See the LWN.net article "Transcendent memory in a nutshell" for a detailed
+overview of frontswap and related kernel parts:
+https://lwn.net/Articles/454795/ )
+
+Frontswap is so named because it can be thought of as the opposite of
+a "backing" store for a swap device.  The storage is assumed to be
+a synchronous concurrency-safe page-oriented "pseudo-RAM device" conforming
+to the requirements of transcendent memory (such as Xen's "tmem", or
+in-kernel compressed memory, aka "zcache", or future RAM-like devices);
+this pseudo-RAM device is not directly accessible or addressable by the
+kernel and is of unknown and possibly time-varying size.  The driver
+links itself to frontswap by calling frontswap_register_ops to set the
+frontswap_ops funcs appropriately and the functions it provides must
+conform to certain policies as follows:
+
+An "init" prepares the device to receive frontswap pages associated
+with the specified swap device number (aka "type").  A "store" will
+copy the page to transcendent memory and associate it with the type and
+offset associated with the page. A "load" will copy the page, if found,
+from transcendent memory into kernel memory, but will NOT remove the page
+from from transcendent memory.  An "invalidate_page" will remove the page
+from transcendent memory and an "invalidate_area" will remove ALL pages
+associated with the swap type (e.g., like swapoff) and notify the "device"
+to refuse further stores with that swap type.
+
+Once a page is successfully stored, a matching load on the page will normally
+succeed.  So when the kernel finds itself in a situation where it needs
+to swap out a page, it first attempts to use frontswap.  If the store returns
+success, the data has been successfully saved to transcendent memory and
+a disk write and, if the data is later read back, a disk read are avoided.
+If a store returns failure, transcendent memory has rejected the data, and the
+page can be written to swap as usual.
+
+If a backend chooses, frontswap can be configured as a "writethrough
+cache" by calling frontswap_writethrough().  In this mode, the reduction
+in swap device writes is lost (and also a non-trivial performance advantage)
+in order to allow the backend to arbitrarily "reclaim" space used to
+store frontswap pages to more completely manage its memory usage.
+
+Note that if a page is stored and the page already exists in transcendent memory
+(a "duplicate" store), either the store succeeds and the data is overwritten,
+or the store fails AND the page is invalidated.  This ensures stale data may
+never be obtained from frontswap.
+
+If properly configured, monitoring of frontswap is done via debugfs in
+the /sys/kernel/debug/frontswap directory.  The effectiveness of
+frontswap can be measured (across all swap devices) with:
+
+failed_stores	- how many store attempts have failed
+loads		- how many loads were attempted (all should succeed)
+succ_stores	- how many store attempts have succeeded
+invalidates	- how many invalidates were attempted
+
+A backend implementation may provide additional metrics.
+
+FAQ
+
+1) Where's the value?
+
+When a workload starts swapping, performance falls through the floor.
+Frontswap significantly increases performance in many such workloads by
+providing a clean, dynamic interface to read and write swap pages to
+"transcendent memory" that is otherwise not directly addressable to the kernel.
+This interface is ideal when data is transformed to a different form
+and size (such as with compression) or secretly moved (as might be
+useful for write-balancing for some RAM-like devices).  Swap pages (and
+evicted page-cache pages) are a great use for this kind of slower-than-RAM-
+but-much-faster-than-disk "pseudo-RAM device" and the frontswap (and
+cleancache) interface to transcendent memory provides a nice way to read
+and write -- and indirectly "name" -- the pages.
+
+Frontswap -- and cleancache -- with a fairly small impact on the kernel,
+provides a huge amount of flexibility for more dynamic, flexible RAM
+utilization in various system configurations:
+
+In the single kernel case, aka "zcache", pages are compressed and
+stored in local memory, thus increasing the total anonymous pages
+that can be safely kept in RAM.  Zcache essentially trades off CPU
+cycles used in compression/decompression for better memory utilization.
+Benchmarks have shown little or no impact when memory pressure is
+low while providing a significant performance improvement (25%+)
+on some workloads under high memory pressure.
+
+"RAMster" builds on zcache by adding "peer-to-peer" transcendent memory
+support for clustered systems.  Frontswap pages are locally compressed
+as in zcache, but then "remotified" to another system's RAM.  This
+allows RAM to be dynamically load-balanced back-and-forth as needed,
+i.e. when system A is overcommitted, it can swap to system B, and
+vice versa.  RAMster can also be configured as a memory server so
+many servers in a cluster can swap, dynamically as needed, to a single
+server configured with a large amount of RAM... without pre-configuring
+how much of the RAM is available for each of the clients!
+
+In the virtual case, the whole point of virtualization is to statistically
+multiplex physical resources acrosst the varying demands of multiple
+virtual machines.  This is really hard to do with RAM and efforts to do
+it well with no kernel changes have essentially failed (except in some
+well-publicized special-case workloads).
+Specifically, the Xen Transcendent Memory backend allows otherwise
+"fallow" hypervisor-owned RAM to not only be "time-shared" between multiple
+virtual machines, but the pages can be compressed and deduplicated to
+optimize RAM utilization.  And when guest OS's are induced to surrender
+underutilized RAM (e.g. with "selfballooning"), sudden unexpected
+memory pressure may result in swapping; frontswap allows those pages
+to be swapped to and from hypervisor RAM (if overall host system memory
+conditions allow), thus mitigating the potentially awful performance impact
+of unplanned swapping.
+
+A KVM implementation is underway and has been RFC'ed to lkml.  And,
+using frontswap, investigation is also underway on the use of NVM as
+a memory extension technology.
+
+2) Sure there may be performance advantages in some situations, but
+   what's the space/time overhead of frontswap?
+
+If CONFIG_FRONTSWAP is disabled, every frontswap hook compiles into
+nothingness and the only overhead is a few extra bytes per swapon'ed
+swap device.  If CONFIG_FRONTSWAP is enabled but no frontswap "backend"
+registers, there is one extra global variable compared to zero for
+every swap page read or written.  If CONFIG_FRONTSWAP is enabled
+AND a frontswap backend registers AND the backend fails every "store"
+request (i.e. provides no memory despite claiming it might),
+CPU overhead is still negligible -- and since every frontswap fail
+precedes a swap page write-to-disk, the system is highly likely
+to be I/O bound and using a small fraction of a percent of a CPU
+will be irrelevant anyway.
+
+As for space, if CONFIG_FRONTSWAP is enabled AND a frontswap backend
+registers, one bit is allocated for every swap page for every swap
+device that is swapon'd.  This is added to the EIGHT bits (which
+was sixteen until about 2.6.34) that the kernel already allocates
+for every swap page for every swap device that is swapon'd.  (Hugh
+Dickins has observed that frontswap could probably steal one of
+the existing eight bits, but let's worry about that minor optimization
+later.)  For very large swap disks (which are rare) on a standard
+4K pagesize, this is 1MB per 32GB swap.
+
+When swap pages are stored in transcendent memory instead of written
+out to disk, there is a side effect that this may create more memory
+pressure that can potentially outweigh the other advantages.  A
+backend, such as zcache, must implement policies to carefully (but
+dynamically) manage memory limits to ensure this doesn't happen.
+
+3) OK, how about a quick overview of what this frontswap patch does
+   in terms that a kernel hacker can grok?
+
+Let's assume that a frontswap "backend" has registered during
+kernel initialization; this registration indicates that this
+frontswap backend has access to some "memory" that is not directly
+accessible by the kernel.  Exactly how much memory it provides is
+entirely dynamic and random.
+
+Whenever a swap-device is swapon'd frontswap_init() is called,
+passing the swap device number (aka "type") as a parameter.
+This notifies frontswap to expect attempts to "store" swap pages
+associated with that number.
+
+Whenever the swap subsystem is readying a page to write to a swap
+device (c.f swap_writepage()), frontswap_store is called.  Frontswap
+consults with the frontswap backend and if the backend says it does NOT
+have room, frontswap_store returns -1 and the kernel swaps the page
+to the swap device as normal.  Note that the response from the frontswap
+backend is unpredictable to the kernel; it may choose to never accept a
+page, it could accept every ninth page, or it might accept every
+page.  But if the backend does accept a page, the data from the page
+has already been copied and associated with the type and offset,
+and the backend guarantees the persistence of the data.  In this case,
+frontswap sets a bit in the "frontswap_map" for the swap device
+corresponding to the page offset on the swap device to which it would
+otherwise have written the data.
+
+When the swap subsystem needs to swap-in a page (swap_readpage()),
+it first calls frontswap_load() which checks the frontswap_map to
+see if the page was earlier accepted by the frontswap backend.  If
+it was, the page of data is filled from the frontswap backend and
+the swap-in is complete.  If not, the normal swap-in code is
+executed to obtain the page of data from the real swap device.
+
+So every time the frontswap backend accepts a page, a swap device read
+and (potentially) a swap device write are replaced by a "frontswap backend
+store" and (possibly) a "frontswap backend loads", which are presumably much
+faster.
+
+4) Can't frontswap be configured as a "special" swap device that is
+   just higher priority than any real swap device (e.g. like zswap,
+   or maybe swap-over-nbd/NFS)?
+
+No.  First, the existing swap subsystem doesn't allow for any kind of
+swap hierarchy.  Perhaps it could be rewritten to accomodate a hierarchy,
+but this would require fairly drastic changes.  Even if it were
+rewritten, the existing swap subsystem uses the block I/O layer which
+assumes a swap device is fixed size and any page in it is linearly
+addressable.  Frontswap barely touches the existing swap subsystem,
+and works around the constraints of the block I/O subsystem to provide
+a great deal of flexibility and dynamicity.
+
+For example, the acceptance of any swap page by the frontswap backend is
+entirely unpredictable. This is critical to the definition of frontswap
+backends because it grants completely dynamic discretion to the
+backend.  In zcache, one cannot know a priori how compressible a page is.
+"Poorly" compressible pages can be rejected, and "poorly" can itself be
+defined dynamically depending on current memory constraints.
+
+Further, frontswap is entirely synchronous whereas a real swap
+device is, by definition, asynchronous and uses block I/O.  The
+block I/O layer is not only unnecessary, but may perform "optimizations"
+that are inappropriate for a RAM-oriented device including delaying
+the write of some pages for a significant amount of time.  Synchrony is
+required to ensure the dynamicity of the backend and to avoid thorny race
+conditions that would unnecessarily and greatly complicate frontswap
+and/or the block I/O subsystem.  That said, only the initial "store"
+and "load" operations need be synchronous.  A separate asynchronous thread
+is free to manipulate the pages stored by frontswap.  For example,
+the "remotification" thread in RAMster uses standard asynchronous
+kernel sockets to move compressed frontswap pages to a remote machine.
+Similarly, a KVM guest-side implementation could do in-guest compression
+and use "batched" hypercalls.
+
+In a virtualized environment, the dynamicity allows the hypervisor
+(or host OS) to do "intelligent overcommit".  For example, it can
+choose to accept pages only until host-swapping might be imminent,
+then force guests to do their own swapping.
+
+There is a downside to the transcendent memory specifications for
+frontswap:  Since any "store" might fail, there must always be a real
+slot on a real swap device to swap the page.  Thus frontswap must be
+implemented as a "shadow" to every swapon'd device with the potential
+capability of holding every page that the swap device might have held
+and the possibility that it might hold no pages at all.  This means
+that frontswap cannot contain more pages than the total of swapon'd
+swap devices.  For example, if NO swap device is configured on some
+installation, frontswap is useless.  Swapless portable devices
+can still use frontswap but a backend for such devices must configure
+some kind of "ghost" swap device and ensure that it is never used.
+
+5) Why this weird definition about "duplicate stores"?  If a page
+   has been previously successfully stored, can't it always be
+   successfully overwritten?
+
+Nearly always it can, but no, sometimes it cannot.  Consider an example
+where data is compressed and the original 4K page has been compressed
+to 1K.  Now an attempt is made to overwrite the page with data that
+is non-compressible and so would take the entire 4K.  But the backend
+has no more space.  In this case, the store must be rejected.  Whenever
+frontswap rejects a store that would overwrite, it also must invalidate
+the old data and ensure that it is no longer accessible.  Since the
+swap subsystem then writes the new data to the read swap device,
+this is the correct course of action to ensure coherency.
+
+6) What is frontswap_shrink for?
+
+When the (non-frontswap) swap subsystem swaps out a page to a real
+swap device, that page is only taking up low-value pre-allocated disk
+space.  But if frontswap has placed a page in transcendent memory, that
+page may be taking up valuable real estate.  The frontswap_shrink
+routine allows code outside of the swap subsystem to force pages out
+of the memory managed by frontswap and back into kernel-addressable memory.
+For example, in RAMster, a "suction driver" thread will attempt
+to "repatriate" pages sent to a remote machine back to the local machine;
+this is driven using the frontswap_shrink mechanism when memory pressure
+subsides.
+
+7) Why does the frontswap patch create the new include file swapfile.h?
+
+The frontswap code depends on some swap-subsystem-internal data
+structures that have, over the years, moved back and forth between
+static and global.  This seemed a reasonable compromise:  Define
+them as global but declare them in a new include file that isn't
+included by the large number of source files that include swap.h.
+
+Dan Magenheimer, last updated April 9, 2012

MAINTAINERS

@@ -1077,7 +1077,7 @@ F:	drivers/media/video/s5p-fimc/
 ARM/SAMSUNG S5P SERIES Multi Format Codec (MFC) SUPPORT
 M:	Kyungmin Park <kyungmin.park@samsung.com>
 M:	Kamil Debski <k.debski@samsung.com>
-M:     Jeongtae Park <jtp.park@samsung.com>
+M:	Jeongtae Park <jtp.park@samsung.com>
 L:	linux-arm-kernel@lists.infradead.org
 L:	linux-media@vger.kernel.org
 S:	Maintained
@@ -1646,11 +1646,11 @@ S:	Maintained
 F:	drivers/gpio/gpio-bt8xx.c
 
 BTRFS FILE SYSTEM
-M:	Chris Mason <chris.mason@oracle.com>
+M:	Chris Mason <chris.mason@fusionio.com>
 L:	linux-btrfs@vger.kernel.org
 W:	http://btrfs.wiki.kernel.org/
 Q:	http://patchwork.kernel.org/project/linux-btrfs/list/
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs.git
 S:	Maintained
 F:	Documentation/filesystems/btrfs.txt
 F:	fs/btrfs/
@@ -1743,10 +1743,10 @@ F:	include/linux/can/platform/
 CAPABILITIES
 M:	Serge Hallyn <serge.hallyn@canonical.com>
 L:	linux-security-module@vger.kernel.org
-S:	Supported	
+S:	Supported
 F:	include/linux/capability.h
 F:	security/capability.c
-F:	security/commoncap.c 
+F:	security/commoncap.c
 F:	kernel/capability.c
 
 CELL BROADBAND ENGINE ARCHITECTURE
@@ -1800,6 +1800,9 @@ F:	include/linux/cfag12864b.h
 CFG80211 and NL80211
 M:	Johannes Berg <johannes@sipsolutions.net>
 L:	linux-wireless@vger.kernel.org
+W:	http://wireless.kernel.org/
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next.git
 S:	Maintained
 F:	include/linux/nl80211.h
 F:	include/net/cfg80211.h
@@ -2146,11 +2149,11 @@ S:	Orphan
 F:	drivers/net/wan/pc300*
 
 CYTTSP TOUCHSCREEN DRIVER
-M:      Javier Martinez Canillas <javier@dowhile0.org>
-L:      linux-input@vger.kernel.org
-S:      Maintained
-F:      drivers/input/touchscreen/cyttsp*
-F:      include/linux/input/cyttsp.h
+M:	Javier Martinez Canillas <javier@dowhile0.org>
+L:	linux-input@vger.kernel.org
+S:	Maintained
+F:	drivers/input/touchscreen/cyttsp*
+F:	include/linux/input/cyttsp.h
 
 DAMA SLAVE for AX.25
 M:	Joerg Reuter <jreuter@yaina.de>
@@ -2270,7 +2273,7 @@ F:	include/linux/device-mapper.h
 F:	include/linux/dm-*.h
 
 DIOLAN U2C-12 I2C DRIVER
-M:	Guenter Roeck <guenter.roeck@ericsson.com>
+M:	Guenter Roeck <linux@roeck-us.net>
 L:	linux-i2c@vger.kernel.org
 S:	Maintained
 F:	drivers/i2c/busses/i2c-diolan-u2c.c
@@ -2930,6 +2933,13 @@ F:	Documentation/power/freezing-of-tasks.txt
 F:	include/linux/freezer.h
 F:	kernel/freezer.c
 
+FRONTSWAP API
+M:	Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+L:	linux-kernel@vger.kernel.org
+S:	Maintained
+F:	mm/frontswap.c
+F:	include/linux/frontswap.h
+
 FS-CACHE: LOCAL CACHING FOR NETWORK FILESYSTEMS
 M:	David Howells <dhowells@redhat.com>
 L:	linux-cachefs@redhat.com
@@ -3138,7 +3148,7 @@ F:	drivers/tty/hvc/
 
 HARDWARE MONITORING
 M:	Jean Delvare <khali@linux-fr.org>
-M:	Guenter Roeck <guenter.roeck@ericsson.com>
+M:	Guenter Roeck <linux@roeck-us.net>
 L:	lm-sensors@lm-sensors.org
 W:	http://www.lm-sensors.org/
 T:	quilt kernel.org/pub/linux/kernel/people/jdelvare/linux-2.6/jdelvare-hwmon/
@@ -4096,6 +4106,8 @@ F:	drivers/scsi/53c700*
 LED SUBSYSTEM
 M:	Bryan Wu <bryan.wu@canonical.com>
 M:	Richard Purdie <rpurdie@rpsys.net>
+L:	linux-leds@vger.kernel.org
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds.git
 S:	Maintained
 F:	drivers/leds/
 F:	include/linux/leds.h
@@ -4340,7 +4352,8 @@ MAC80211
 M:	Johannes Berg <johannes@sipsolutions.net>
 L:	linux-wireless@vger.kernel.org
 W:	http://linuxwireless.org/
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next.git
 S:	Maintained
 F:	Documentation/networking/mac80211-injection.txt
 F:	include/net/mac80211.h
@@ -4351,7 +4364,8 @@ M:	Stefano Brivio <stefano.brivio@polimi.it>
 M:	Mattias Nissler <mattias.nissler@gmx.de>
 L:	linux-wireless@vger.kernel.org
 W:	http://linuxwireless.org/en/developers/Documentation/mac80211/RateControl/PID
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next.git
 S:	Maintained
 F:	net/mac80211/rc80211_pid*
 
@@ -4411,6 +4425,13 @@ S:	Orphan
 F:	drivers/video/matrox/matroxfb_*
 F:	include/linux/matroxfb.h
 
+MAX16065 HARDWARE MONITOR DRIVER
+M:	Guenter Roeck <linux@roeck-us.net>
+L:	lm-sensors@lm-sensors.org
+S:	Maintained
+F:	Documentation/hwmon/max16065
+F:	drivers/hwmon/max16065.c
+
 MAX6650 HARDWARE MONITOR AND FAN CONTROLLER DRIVER
 M:	"Hans J. Koch" <hjk@hansjkoch.de>
 L:	lm-sensors@lm-sensors.org
@@ -5149,7 +5170,7 @@ F:	drivers/leds/leds-pca9532.c
 F:	include/linux/leds-pca9532.h
 
 PCA9541 I2C BUS MASTER SELECTOR DRIVER
-M:	Guenter Roeck <guenter.roeck@ericsson.com>
+M:	Guenter Roeck <linux@roeck-us.net>
 L:	linux-i2c@vger.kernel.org
 S:	Maintained
 F:	drivers/i2c/muxes/i2c-mux-pca9541.c
@@ -5169,7 +5190,7 @@ S:	Maintained
 F:	drivers/firmware/pcdp.*
 
 PCI ERROR RECOVERY
-M:     Linas Vepstas <linasvepstas@gmail.com>
+M:	Linas Vepstas <linasvepstas@gmail.com>
 L:	linux-pci@vger.kernel.org
 S:	Supported
 F:	Documentation/PCI/pci-error-recovery.txt
@@ -5299,7 +5320,7 @@ F:	drivers/video/fb-puv3.c
 F:	drivers/rtc/rtc-puv3.c
 
 PMBUS HARDWARE MONITORING DRIVERS
-M:	Guenter Roeck <guenter.roeck@ericsson.com>
+M:	Guenter Roeck <linux@roeck-us.net>
 L:	lm-sensors@lm-sensors.org
 W:	http://www.lm-sensors.org/
 W:	http://www.roeck-us.net/linux/drivers/
@@ -5695,6 +5716,9 @@ F:	include/linux/remoteproc.h
 RFKILL
 M:	Johannes Berg <johannes@sipsolutions.net>
 L:	linux-wireless@vger.kernel.org
+W:	http://wireless.kernel.org/
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next.git
 S:	Maintained
 F:	Documentation/rfkill.txt
 F:	net/rfkill/
@@ -7291,11 +7315,11 @@ F:	Documentation/DocBook/uio-howto.tmpl
 F:	drivers/uio/
 F:	include/linux/uio*.h
 
-UTIL-LINUX-NG PACKAGE
+UTIL-LINUX PACKAGE
 M:	Karel Zak <kzak@redhat.com>
-L:	util-linux-ng@vger.kernel.org
-W:	http://kernel.org/~kzak/util-linux-ng/
-T:	git git://git.kernel.org/pub/scm/utils/util-linux-ng/util-linux-ng.git
+L:	util-linux@vger.kernel.org
+W:	http://en.wikipedia.org/wiki/Util-linux
+T:	git git://git.kernel.org/pub/scm/utils/util-linux/util-linux.git
 S:	Maintained
 
 UVESAFB DRIVER

Makefile

@@ -1,7 +1,7 @@
 VERSION = 3
 PATCHLEVEL = 5
 SUBLEVEL = 0
-EXTRAVERSION = -rc1
+EXTRAVERSION = -rc3
 NAME = Saber-toothed Squirrel
 
 # *DOCUMENTATION*

arch/arm/Kconfig

@@ -7,7 +7,6 @@ config ARM
 	select HAVE_IDE if PCI || ISA || PCMCIA
 	select HAVE_DMA_ATTRS
 	select HAVE_DMA_CONTIGUOUS if (CPU_V6 || CPU_V6K || CPU_V7)
-	select CMA if (CPU_V6 || CPU_V6K || CPU_V7)
 	select HAVE_MEMBLOCK
 	select RTC_LIB
 	select SYS_SUPPORTS_APM_EMULATION

arch/arm/common/dmabounce.c

@@ -366,8 +366,8 @@ static int __dmabounce_sync_for_cpu(struct device *dev, dma_addr_t addr,
 	struct safe_buffer *buf;
 	unsigned long off;
 
-	dev_dbg(dev, "%s(dma=%#x,off=%#lx,sz=%zx,dir=%x)\n",
-		__func__, addr, off, sz, dir);
+	dev_dbg(dev, "%s(dma=%#x,sz=%zx,dir=%x)\n",
+		__func__, addr, sz, dir);
 
 	buf = find_safe_buffer_dev(dev, addr, __func__);
 	if (!buf)
@@ -377,8 +377,8 @@ static int __dmabounce_sync_for_cpu(struct device *dev, dma_addr_t addr,
 
 	BUG_ON(buf->direction != dir);
 
-	dev_dbg(dev, "%s: unsafe buffer %p (dma=%#x) mapped to %p (dma=%#x)\n",
-		__func__, buf->ptr, virt_to_dma(dev, buf->ptr),
+	dev_dbg(dev, "%s: unsafe buffer %p (dma=%#x off=%#lx) mapped to %p (dma=%#x)\n",
+		__func__, buf->ptr, virt_to_dma(dev, buf->ptr), off,
 		buf->safe, buf->safe_dma_addr);
 
 	DO_STATS(dev->archdata.dmabounce->bounce_count++);
@@ -406,8 +406,8 @@ static int __dmabounce_sync_for_device(struct device *dev, dma_addr_t addr,
 	struct safe_buffer *buf;
 	unsigned long off;
 
-	dev_dbg(dev, "%s(dma=%#x,off=%#lx,sz=%zx,dir=%x)\n",
-		__func__, addr, off, sz, dir);
+	dev_dbg(dev, "%s(dma=%#x,sz=%zx,dir=%x)\n",
+		__func__, addr, sz, dir);
 
 	buf = find_safe_buffer_dev(dev, addr, __func__);
 	if (!buf)
@@ -417,8 +417,8 @@ static int __dmabounce_sync_for_device(struct device *dev, dma_addr_t addr,
 
 	BUG_ON(buf->direction != dir);
 
-	dev_dbg(dev, "%s: unsafe buffer %p (dma=%#x) mapped to %p (dma=%#x)\n",
-		__func__, buf->ptr, virt_to_dma(dev, buf->ptr),
+	dev_dbg(dev, "%s: unsafe buffer %p (dma=%#x off=%#lx) mapped to %p (dma=%#x)\n",
+		__func__, buf->ptr, virt_to_dma(dev, buf->ptr), off,
 		buf->safe, buf->safe_dma_addr);
 
 	DO_STATS(dev->archdata.dmabounce->bounce_count++);

arch/arm/mach-omap2/display.c

@@ -271,9 +271,9 @@ static struct platform_device *create_simple_dss_pdev(const char *pdev_name,
 		goto err;
 	}
 
-	r = omap_device_register(pdev);
+	r = platform_device_add(pdev);
 	if (r) {
-		pr_err("Could not register omap_device for %s\n", pdev_name);
+		pr_err("Could not register platform_device for %s\n", pdev_name);
 		goto err;
 	}
 

arch/arm/mach-shmobile/Kconfig

@@ -186,6 +186,12 @@ config SH_TIMER_TMU
 	help
 	  This enables build of the TMU timer driver.
 
+config EM_TIMER_STI
+	bool "STI timer driver"
+	default y
+	help
+	  This enables build of the STI timer driver.
+
 endmenu
 
 config SH_CLK_CPG

arch/arm/mm/dma-mapping.c

@@ -228,7 +228,7 @@ static pte_t **consistent_pte;
 
 #define DEFAULT_CONSISTENT_DMA_SIZE SZ_2M
 
-unsigned long consistent_base = CONSISTENT_END - DEFAULT_CONSISTENT_DMA_SIZE;
+static unsigned long consistent_base = CONSISTENT_END - DEFAULT_CONSISTENT_DMA_SIZE;
 
 void __init init_consistent_dma_size(unsigned long size)
 {
@@ -268,10 +268,8 @@ static int __init consistent_init(void)
 	unsigned long base = consistent_base;
 	unsigned long num_ptes = (CONSISTENT_END - base) >> PMD_SHIFT;
 
-#ifndef CONFIG_ARM_DMA_USE_IOMMU
-	if (cpu_architecture() >= CPU_ARCH_ARMv6)
+	if (IS_ENABLED(CONFIG_CMA) && !IS_ENABLED(CONFIG_ARM_DMA_USE_IOMMU))
 		return 0;
-#endif
 
 	consistent_pte = kmalloc(num_ptes * sizeof(pte_t), GFP_KERNEL);
 	if (!consistent_pte) {
@@ -323,7 +321,7 @@ static struct arm_vmregion_head coherent_head = {
 	.vm_list	= LIST_HEAD_INIT(coherent_head.vm_list),
 };
 
-size_t coherent_pool_size = DEFAULT_CONSISTENT_DMA_SIZE / 8;
+static size_t coherent_pool_size = DEFAULT_CONSISTENT_DMA_SIZE / 8;
 
 static int __init early_coherent_pool(char *p)
 {
@@ -342,7 +340,7 @@ static int __init coherent_init(void)
 	struct page *page;
 	void *ptr;
 
-	if (cpu_architecture() < CPU_ARCH_ARMv6)
+	if (!IS_ENABLED(CONFIG_CMA))
 		return 0;
 
 	ptr = __alloc_from_contiguous(NULL, size, prot, &page);
@@ -704,7 +702,7 @@ static void *__dma_alloc(struct device *dev, size_t size, dma_addr_t *handle,
 
 	if (arch_is_coherent() || nommu())
 		addr = __alloc_simple_buffer(dev, size, gfp, &page);
-	else if (cpu_architecture() < CPU_ARCH_ARMv6)
+	else if (!IS_ENABLED(CONFIG_CMA))
 		addr = __alloc_remap_buffer(dev, size, gfp, prot, &page, caller);
 	else if (gfp & GFP_ATOMIC)
 		addr = __alloc_from_pool(dev, size, &page, caller);
@@ -773,7 +771,7 @@ void arm_dma_free(struct device *dev, size_t size, void *cpu_addr,
 
 	if (arch_is_coherent() || nommu()) {
 		__dma_free_buffer(page, size);
-	} else if (cpu_architecture() < CPU_ARCH_ARMv6) {
+	} else if (!IS_ENABLED(CONFIG_CMA)) {
 		__dma_free_remap(cpu_addr, size);
 		__dma_free_buffer(page, size);
 	} else {

arch/arm/mm/init.c

@@ -212,7 +212,7 @@ EXPORT_SYMBOL(arm_dma_zone_size);
  * allocations.  This must be the smallest DMA mask in the system,
  * so a successful GFP_DMA allocation will always satisfy this.
  */
-u32 arm_dma_limit;
+phys_addr_t arm_dma_limit;
 
 static void __init arm_adjust_dma_zone(unsigned long *size, unsigned long *hole,
 	unsigned long dma_size)

arch/arm/mm/mm.h

@@ -62,7 +62,7 @@ extern void __flush_dcache_page(struct address_space *mapping, struct page *page
 #endif
 
 #ifdef CONFIG_ZONE_DMA
-extern u32 arm_dma_limit;
+extern phys_addr_t arm_dma_limit;
 #else
 #define arm_dma_limit ((u32)~0)
 #endif

arch/avr32/kernel/signal.c

@@ -300,7 +300,7 @@ asmlinkage void do_notify_resume(struct pt_regs *regs, struct thread_info *ti)
 	if ((sysreg_read(SR) & MODE_MASK) == MODE_SUPERVISOR)
 		syscall = 1;
 
-	if (ti->flags & _TIF_SIGPENDING))
+	if (ti->flags & _TIF_SIGPENDING)
 		do_signal(regs, syscall);
 
 	if (ti->flags & _TIF_NOTIFY_RESUME) {

arch/blackfin/kernel/process.c

@@ -173,7 +173,7 @@ asmlinkage int bfin_clone(struct pt_regs *regs)
 	unsigned long newsp;
 
 #ifdef __ARCH_SYNC_CORE_DCACHE
-	if (current->rt.nr_cpus_allowed == num_possible_cpus())
+	if (current->nr_cpus_allowed == num_possible_cpus())
 		set_cpus_allowed_ptr(current, cpumask_of(smp_processor_id()));
 #endif
 

arch/m68k/Kconfig

@@ -7,6 +7,8 @@ config M68K
 	select GENERIC_IRQ_SHOW
 	select ARCH_HAVE_NMI_SAFE_CMPXCHG if RMW_INSNS
 	select GENERIC_CPU_DEVICES
+	select GENERIC_STRNCPY_FROM_USER if MMU
+	select GENERIC_STRNLEN_USER if MMU
 	select FPU if MMU
 	select ARCH_USES_GETTIMEOFFSET if MMU && !COLDFIRE
 

arch/m68k/include/asm/Kbuild

@@ -1,2 +1,4 @@
 include include/asm-generic/Kbuild.asm
 header-y += cachectl.h
+
+generic-y += word-at-a-time.h

arch/m68k/include/asm/m528xsim.h

@@ -86,7 +86,7 @@
 /*
  *	QSPI module.
  */
-#define	MCFQSPI_IOBASE		(MCF_IPSBAR + 0x340)
+#define	MCFQSPI_BASE		(MCF_IPSBAR + 0x340)
 #define	MCFQSPI_SIZE		0x40
 
 #define	MCFQSPI_CS0		147

arch/m68k/include/asm/uaccess_mm.h

@@ -379,12 +379,15 @@ __constant_copy_to_user(void __user *to, const void *from, unsigned long n)
 #define copy_from_user(to, from, n)	__copy_from_user(to, from, n)
 #define copy_to_user(to, from, n)	__copy_to_user(to, from, n)
 
-long strncpy_from_user(char *dst, const char __user *src, long count);
-long strnlen_user(const char __user *src, long n);
+#define user_addr_max() \
+	(segment_eq(get_fs(), USER_DS) ? TASK_SIZE : ~0UL)
+
+extern long strncpy_from_user(char *dst, const char __user *src, long count);
+extern __must_check long strlen_user(const char __user *str);
+extern __must_check long strnlen_user(const char __user *str, long n);
+
 unsigned long __clear_user(void __user *to, unsigned long n);
 
 #define clear_user	__clear_user
 
-#define strlen_user(str) strnlen_user(str, 32767)
-
 #endif /* _M68K_UACCESS_H */

arch/m68k/kernel/ptrace.c

@@ -286,7 +286,7 @@ asmlinkage void syscall_trace(void)
 	}
 }
 
-#ifdef CONFIG_COLDFIRE
+#if defined(CONFIG_COLDFIRE) || !defined(CONFIG_MMU)
 asmlinkage int syscall_trace_enter(void)
 {
 	int ret = 0;

arch/m68k/kernel/time.c

@@ -85,7 +85,7 @@ void __init time_init(void)
 	mach_sched_init(timer_interrupt);
 }
 
-#ifdef CONFIG_M68KCLASSIC
+#ifdef CONFIG_ARCH_USES_GETTIMEOFFSET
 
 u32 arch_gettimeoffset(void)
 {
@@ -108,4 +108,4 @@ static int __init rtc_init(void)
 
 module_init(rtc_init);
 
-#endif /* CONFIG_M68KCLASSIC */
+#endif /* CONFIG_ARCH_USES_GETTIMEOFFSET */

arch/m68k/lib/uaccess.c

@@ -103,80 +103,6 @@ unsigned long __generic_copy_to_user(void __user *to, const void *from,
 }
 EXPORT_SYMBOL(__generic_copy_to_user);
 
-/*
- * Copy a null terminated string from userspace.
- */
-long strncpy_from_user(char *dst, const char __user *src, long count)
-{
-	long res;
-	char c;
-
-	if (count <= 0)
-		return count;
-
-	asm volatile ("\n"
-		"1:	"MOVES".b	(%2)+,%4\n"
-		"	move.b	%4,(%1)+\n"
-		"	jeq	2f\n"
-		"	subq.l	#1,%3\n"
-		"	jne	1b\n"
-		"2:	sub.l	%3,%0\n"
-		"3:\n"
-		"	.section .fixup,\"ax\"\n"
-		"	.even\n"
-		"10:	move.l	%5,%0\n"
-		"	jra	3b\n"
-		"	.previous\n"
-		"\n"
-		"	.section __ex_table,\"a\"\n"
-		"	.align	4\n"
-		"	.long	1b,10b\n"
-		"	.previous"
-		: "=d" (res), "+a" (dst), "+a" (src), "+r" (count), "=&d" (c)
-		: "i" (-EFAULT), "0" (count));
-
-	return res;
-}
-EXPORT_SYMBOL(strncpy_from_user);
-
-/*
- * Return the size of a string (including the ending 0)
- *
- * Return 0 on exception, a value greater than N if too long
- */
-long strnlen_user(const char __user *src, long n)
-{
-	char c;
-	long res;
-
-	asm volatile ("\n"
-		"1:	subq.l	#1,%1\n"
-		"	jmi	3f\n"
-		"2:	"MOVES".b	(%0)+,%2\n"
-		"	tst.b	%2\n"
-		"	jne	1b\n"
-		"	jra	4f\n"
-		"\n"
-		"3:	addq.l	#1,%0\n"
-		"4:	sub.l	%4,%0\n"
-		"5:\n"
-		"	.section .fixup,\"ax\"\n"
-		"	.even\n"
-		"20:	sub.l	%0,%0\n"
-		"	jra	5b\n"
-		"	.previous\n"
-		"\n"
-		"	.section __ex_table,\"a\"\n"
-		"	.align	4\n"
-		"	.long	2b,20b\n"
-		"	.previous\n"
-		: "=&a" (res), "+d" (n), "=&d" (c)
-		: "0" (src), "r" (src));
-
-	return res;
-}
-EXPORT_SYMBOL(strnlen_user);
-
 /*
  * Zero Userspace
  */

arch/m68k/platform/68328/timers.c

@@ -53,6 +53,7 @@
 #endif
 
 static u32 m68328_tick_cnt;
+static irq_handler_t timer_interrupt;
 
 /***************************************************************************/
 
@@ -62,7 +63,7 @@ static irqreturn_t hw_tick(int irq, void *dummy)
 	TSTAT &= 0;
 
 	m68328_tick_cnt += TICKS_PER_JIFFY;
-	return arch_timer_interrupt(irq, dummy);
+	return timer_interrupt(irq, dummy);
 }
 
 /***************************************************************************/
@@ -99,7 +100,7 @@ static struct clocksource m68328_clk = {
 
 /***************************************************************************/
 
-void hw_timer_init(void)
+void hw_timer_init(irq_handler_t handler)
 {
 	/* disable timer 1 */
 	TCTL = 0;
@@ -115,6 +116,7 @@ void hw_timer_init(void)
 	/* Enable timer 1 */
 	TCTL |= TCTL_TEN;
 	clocksource_register_hz(&m68328_clk, TICKS_PER_JIFFY*HZ);
+	timer_interrupt = handler;
 }
 
 /***************************************************************************/

arch/m68k/platform/68360/config.c

@@ -35,6 +35,7 @@ extern void m360_cpm_reset(void);
 #define OSCILLATOR  (unsigned long int)33000000
 #endif
 
+static irq_handler_t timer_interrupt;
 unsigned long int system_clock;
 
 extern QUICC *pquicc;
@@ -52,7 +53,7 @@ static irqreturn_t hw_tick(int irq, void *dummy)
 
   pquicc->timer_ter1 = 0x0002; /* clear timer event */
 
-  return arch_timer_interrupt(irq, dummy);
+  return timer_interrupt(irq, dummy);
 }
 
 static struct irqaction m68360_timer_irq = {
@@ -61,7 +62,7 @@ static struct irqaction m68360_timer_irq = {
 	.handler = hw_tick,
 };
 
-void hw_timer_init(void)
+void hw_timer_init(irq_handler_t handler)
 {
   unsigned char prescaler;
   unsigned short tgcr_save;
@@ -94,6 +95,8 @@ void hw_timer_init(void)
 
   pquicc->timer_ter1 = 0x0003; /* clear timer events */
 
+  timer_interrupt = handler;
+
   /* enable timer 1 interrupt in CIMR */
   setup_irq(CPMVEC_TIMER1, &m68360_timer_irq);
 

arch/parisc/Makefile

@@ -21,6 +21,7 @@ KBUILD_DEFCONFIG := default_defconfig
 
 NM		= sh $(srctree)/arch/parisc/nm
 CHECKFLAGS	+= -D__hppa__=1
+LIBGCC		= $(shell $(CC) $(KBUILD_CFLAGS) -print-libgcc-file-name)
 
 MACHINE		:= $(shell uname -m)
 ifeq ($(MACHINE),parisc*)
@@ -79,7 +80,7 @@ kernel-y			:= mm/ kernel/ math-emu/
 kernel-$(CONFIG_HPUX)		+= hpux/
 
 core-y	+= $(addprefix arch/parisc/, $(kernel-y))
-libs-y	+= arch/parisc/lib/ `$(CC) -print-libgcc-file-name`
+libs-y	+= arch/parisc/lib/ $(LIBGCC)
 
 drivers-$(CONFIG_OPROFILE)		+= arch/parisc/oprofile/
 

arch/parisc/include/asm/Kbuild

@@ -1,3 +1,4 @@
 include include/asm-generic/Kbuild.asm
 
 header-y += pdc.h
+generic-y += word-at-a-time.h

arch/parisc/include/asm/bug.h

@@ -1,6 +1,8 @@
 #ifndef _PARISC_BUG_H
 #define _PARISC_BUG_H
 
+#include <linux/kernel.h>	/* for BUGFLAG_TAINT */
+
 /*
  * Tell the user there is some problem.
  * The offending file and line are encoded in the __bug_table section.

arch/powerpc/include/asm/hw_irq.h

@@ -100,6 +100,9 @@ static inline void hard_irq_disable(void)
 	get_paca()->irq_happened |= PACA_IRQ_HARD_DIS;
 }
 
+/* include/linux/interrupt.h needs hard_irq_disable to be a macro */
+#define hard_irq_disable	hard_irq_disable
+
 /*
  * This is called by asynchronous interrupts to conditionally
  * re-enable hard interrupts when soft-disabled after having

arch/powerpc/kernel/module_32.c

@@ -176,8 +176,8 @@ int module_frob_arch_sections(Elf32_Ehdr *hdr,
 
 static inline int entry_matches(struct ppc_plt_entry *entry, Elf32_Addr val)
 {
-	if (entry->jump[0] == 0x3d600000 + ((val + 0x8000) >> 16)
-	    && entry->jump[1] == 0x396b0000 + (val & 0xffff))
+	if (entry->jump[0] == 0x3d800000 + ((val + 0x8000) >> 16)
+	    && entry->jump[1] == 0x398c0000 + (val & 0xffff))
 		return 1;
 	return 0;
 }
@@ -204,10 +204,9 @@ static uint32_t do_plt_call(void *location,
 		entry++;
 	}
 
-	/* Stolen from Paul Mackerras as well... */
-	entry->jump[0] = 0x3d600000+((val+0x8000)>>16);	/* lis r11,sym@ha */
-	entry->jump[1] = 0x396b0000 + (val&0xffff);	/* addi r11,r11,sym@l*/
-	entry->jump[2] = 0x7d6903a6;			/* mtctr r11 */
+	entry->jump[0] = 0x3d800000+((val+0x8000)>>16); /* lis r12,sym@ha */
+	entry->jump[1] = 0x398c0000 + (val&0xffff);     /* addi r12,r12,sym@l*/
+	entry->jump[2] = 0x7d8903a6;                    /* mtctr r12 */
 	entry->jump[3] = 0x4e800420;			/* bctr */
 
 	DEBUGP("Initialized plt for 0x%x at %p\n", val, entry);

arch/powerpc/kernel/time.c

@@ -475,6 +475,7 @@ void timer_interrupt(struct pt_regs * regs)
 	struct pt_regs *old_regs;
 	u64 *next_tb = &__get_cpu_var(decrementers_next_tb);
 	struct clock_event_device *evt = &__get_cpu_var(decrementers);
+	u64 now;
 
 	/* Ensure a positive value is written to the decrementer, or else
 	 * some CPUs will continue to take decrementer exceptions.
@@ -509,9 +510,16 @@ void timer_interrupt(struct pt_regs * regs)
 		irq_work_run();
 	}
 
-	*next_tb = ~(u64)0;
-	if (evt->event_handler)
-		evt->event_handler(evt);
+	now = get_tb_or_rtc();
+	if (now >= *next_tb) {
+		*next_tb = ~(u64)0;
+		if (evt->event_handler)
+			evt->event_handler(evt);
+	} else {
+		now = *next_tb - now;
+		if (now <= DECREMENTER_MAX)
+			set_dec((int)now);
+	}
 
 #ifdef CONFIG_PPC64
 	/* collect purr register values often, for accurate calculations */

arch/sh/Kconfig

@@ -32,6 +32,8 @@ config SUPERH
 	select GENERIC_SMP_IDLE_THREAD
 	select GENERIC_CLOCKEVENTS
 	select GENERIC_CMOS_UPDATE if SH_SH03 || SH_DREAMCAST
+	select GENERIC_STRNCPY_FROM_USER
+	select GENERIC_STRNLEN_USER
 	help
 	  The SuperH is a RISC processor targeted for use in embedded systems
 	  and consumer electronics; it was also used in the Sega Dreamcast

arch/sh/Makefile

@@ -9,6 +9,12 @@
 # License.  See the file "COPYING" in the main directory of this archive
 # for more details.
 #
+ifneq ($(SUBARCH),$(ARCH))
+  ifeq ($(CROSS_COMPILE),)
+    CROSS_COMPILE := $(call cc-cross-prefix, $(UTS_MACHINE)-linux-  $(UTS_MACHINE)-linux-gnu-  $(UTS_MACHINE)-unknown-linux-gnu-)
+  endif
+endif
+
 isa-y					:= any
 isa-$(CONFIG_SH_DSP)			:= sh
 isa-$(CONFIG_CPU_SH2)			:= sh2
@@ -106,19 +112,13 @@ LDFLAGS_vmlinux		+= --defsym phys_stext=_stext-$(CONFIG_PAGE_OFFSET) \
 KBUILD_DEFCONFIG	:= cayman_defconfig
 endif
 
-ifneq ($(SUBARCH),$(ARCH))
-  ifeq ($(CROSS_COMPILE),)
-    CROSS_COMPILE := $(call cc-cross-prefix, $(UTS_MACHINE)-linux-  $(UTS_MACHINE)-linux-gnu-  $(UTS_MACHINE)-unknown-linux-gnu-)
-  endif
-endif
-
 ifdef CONFIG_CPU_LITTLE_ENDIAN
 ld-bfd			:= elf32-$(UTS_MACHINE)-linux
-LDFLAGS_vmlinux		+= --defsym 'jiffies=jiffies_64' --oformat $(ld-bfd)
+LDFLAGS_vmlinux		+= --defsym jiffies=jiffies_64 --oformat $(ld-bfd)
 LDFLAGS			+= -EL
 else
 ld-bfd			:= elf32-$(UTS_MACHINE)big-linux
-LDFLAGS_vmlinux		+= --defsym 'jiffies=jiffies_64+4' --oformat $(ld-bfd)
+LDFLAGS_vmlinux		+= --defsym jiffies=jiffies_64+4 --oformat $(ld-bfd)
 LDFLAGS			+= -EB
 endif
 

arch/sh/include/asm/Kbuild

@@ -1,5 +1,39 @@
 include include/asm-generic/Kbuild.asm
 
+generic-y += bitsperlong.h
+generic-y += cputime.h
+generic-y += current.h
+generic-y += delay.h
+generic-y += div64.h
+generic-y += emergency-restart.h
+generic-y += errno.h
+generic-y += fcntl.h
+generic-y += ioctl.h
+generic-y += ipcbuf.h
+generic-y += irq_regs.h
+generic-y += kvm_para.h
+generic-y += local.h
+generic-y += local64.h
+generic-y += param.h
+generic-y += parport.h
+generic-y += percpu.h
+generic-y += poll.h
+generic-y += mman.h
+generic-y += msgbuf.h
+generic-y += resource.h
+generic-y += scatterlist.h
+generic-y += sembuf.h
+generic-y += serial.h
+generic-y += shmbuf.h
+generic-y += siginfo.h
+generic-y += sizes.h
+generic-y += socket.h
+generic-y += statfs.h
+generic-y += termbits.h
+generic-y += termios.h
+generic-y += ucontext.h
+generic-y += xor.h
+
 header-y += cachectl.h
 header-y += cpu-features.h
 header-y += hw_breakpoint.h

arch/sh/include/asm/bitsperlong.h

@@ -1 +0,0 @@
-#include <asm-generic/bitsperlong.h>

arch/sh/include/asm/cputime.h

@@ -1,6 +0,0 @@
-#ifndef __SH_CPUTIME_H
-#define __SH_CPUTIME_H
-
-#include <asm-generic/cputime.h>
-
-#endif /* __SH_CPUTIME_H */

arch/sh/include/asm/current.h

@@ -1 +0,0 @@
-#include <asm-generic/current.h>

arch/sh/include/asm/delay.h

@@ -1 +0,0 @@
-#include <asm-generic/delay.h>

arch/sh/include/asm/div64.h

@@ -1 +0,0 @@
-#include <asm-generic/div64.h>

arch/sh/include/asm/emergency-restart.h

@@ -1,6 +0,0 @@
-#ifndef _ASM_EMERGENCY_RESTART_H
-#define _ASM_EMERGENCY_RESTART_H
-
-#include <asm-generic/emergency-restart.h>
-
-#endif /* _ASM_EMERGENCY_RESTART_H */

arch/sh/include/asm/errno.h

@@ -1,6 +0,0 @@
-#ifndef __ASM_SH_ERRNO_H
-#define __ASM_SH_ERRNO_H
-
-#include <asm-generic/errno.h>
-
-#endif /* __ASM_SH_ERRNO_H */

arch/sh/include/asm/fcntl.h

@@ -1 +0,0 @@
-#include <asm-generic/fcntl.h>

arch/sh/include/asm/ioctl.h

@@ -1 +0,0 @@
-#include <asm-generic/ioctl.h>

arch/sh/include/asm/ipcbuf.h

@@ -1 +0,0 @@
-#include <asm-generic/ipcbuf.h>

arch/sh/include/asm/irq_regs.h

@@ -1 +0,0 @@
-#include <asm-generic/irq_regs.h>

arch/sh/include/asm/kvm_para.h

@@ -1 +0,0 @@
-#include <asm-generic/kvm_para.h>

arch/sh/include/asm/local.h

@@ -1,7 +0,0 @@
-#ifndef __ASM_SH_LOCAL_H
-#define __ASM_SH_LOCAL_H
-
-#include <asm-generic/local.h>
-
-#endif /* __ASM_SH_LOCAL_H */
-

arch/sh/include/asm/local64.h

@@ -1 +0,0 @@
-#include <asm-generic/local64.h>

arch/sh/include/asm/mman.h

@@ -1 +0,0 @@
-#include <asm-generic/mman.h>

arch/sh/include/asm/msgbuf.h

@@ -1 +0,0 @@
-#include <asm-generic/msgbuf.h>

arch/sh/include/asm/param.h

@@ -1 +0,0 @@
-#include <asm-generic/param.h>

arch/sh/include/asm/parport.h

@@ -1 +0,0 @@
-#include <asm-generic/parport.h>

arch/sh/include/asm/percpu.h

@@ -1,6 +0,0 @@
-#ifndef __ARCH_SH_PERCPU
-#define __ARCH_SH_PERCPU
-
-#include <asm-generic/percpu.h>
-
-#endif /* __ARCH_SH_PERCPU */

arch/sh/include/asm/poll.h

@@ -1 +0,0 @@
-#include <asm-generic/poll.h>

arch/sh/include/asm/resource.h

@@ -1,6 +0,0 @@
-#ifndef __ASM_SH_RESOURCE_H
-#define __ASM_SH_RESOURCE_H
-
-#include <asm-generic/resource.h>
-
-#endif /* __ASM_SH_RESOURCE_H */

arch/sh/include/asm/scatterlist.h

@@ -1,6 +0,0 @@
-#ifndef __ASM_SH_SCATTERLIST_H
-#define __ASM_SH_SCATTERLIST_H
-
-#include <asm-generic/scatterlist.h>
-
-#endif /* __ASM_SH_SCATTERLIST_H */

arch/sh/include/asm/sembuf.h

@@ -1 +0,0 @@
-#include <asm-generic/sembuf.h>

arch/sh/include/asm/serial.h

@@ -1 +0,0 @@
-#include <asm-generic/serial.h>

arch/sh/include/asm/shmbuf.h

@@ -1 +0,0 @@
-#include <asm-generic/shmbuf.h>

arch/sh/include/asm/siginfo.h

@@ -1,6 +0,0 @@
-#ifndef __ASM_SH_SIGINFO_H
-#define __ASM_SH_SIGINFO_H
-
-#include <asm-generic/siginfo.h>
-
-#endif /* __ASM_SH_SIGINFO_H */

arch/sh/include/asm/sizes.h

@@ -1 +0,0 @@
-#include <asm-generic/sizes.h>

arch/sh/include/asm/socket.h

@@ -1 +0,0 @@
-#include <asm-generic/socket.h>

arch/sh/include/asm/statfs.h

@@ -1,6 +0,0 @@
-#ifndef __ASM_SH_STATFS_H
-#define __ASM_SH_STATFS_H
-
-#include <asm-generic/statfs.h>
-
-#endif /* __ASM_SH_STATFS_H */

arch/sh/include/asm/termbits.h

@@ -1 +0,0 @@
-#include <asm-generic/termbits.h>

arch/sh/include/asm/termios.h

@@ -1 +0,0 @@
-#include <asm-generic/termios.h>

arch/sh/include/asm/uaccess.h

@@ -25,6 +25,8 @@
 	(__chk_user_ptr(addr),		\
 	 __access_ok((unsigned long __force)(addr), (size)))
 
+#define user_addr_max()	(current_thread_info()->addr_limit.seg)
+
 /*
  * Uh, these should become the main single-value transfer routines ...
  * They automatically use the right size if we just have the right
@@ -100,6 +102,11 @@ struct __large_struct { unsigned long buf[100]; };
 # include "uaccess_64.h"
 #endif
 
+extern long strncpy_from_user(char *dest, const char __user *src, long count);
+
+extern __must_check long strlen_user(const char __user *str);
+extern __must_check long strnlen_user(const char __user *str, long n);
+
 /* Generic arbitrary sized copy.  */
 /* Return the number of bytes NOT copied */
 __kernel_size_t __copy_user(void *to, const void *from, __kernel_size_t n);
@@ -137,37 +144,6 @@ __kernel_size_t __clear_user(void *addr, __kernel_size_t size);
 	__cl_size;							\
 })
 
-/**
- * strncpy_from_user: - Copy a NUL terminated string from userspace.
- * @dst:   Destination address, in kernel space.  This buffer must be at
- *         least @count bytes long.
- * @src:   Source address, in user space.
- * @count: Maximum number of bytes to copy, including the trailing NUL.
- *
- * Copies a NUL-terminated string from userspace to kernel space.
- *
- * On success, returns the length of the string (not including the trailing
- * NUL).
- *
- * If access to userspace fails, returns -EFAULT (some data may have been
- * copied).
- *
- * If @count is smaller than the length of the string, copies @count bytes
- * and returns @count.
- */
-#define strncpy_from_user(dest,src,count)				\
-({									\
-	unsigned long __sfu_src = (unsigned long)(src);			\
-	int __sfu_count = (int)(count);					\
-	long __sfu_res = -EFAULT;					\
-									\
-	if (__access_ok(__sfu_src, __sfu_count))			\
-		__sfu_res = __strncpy_from_user((unsigned long)(dest),	\
-				__sfu_src, __sfu_count);		\
-									\
-	__sfu_res;							\
-})
-
 static inline unsigned long
 copy_from_user(void *to, const void __user *from, unsigned long n)
 {
@@ -192,43 +168,6 @@ copy_to_user(void __user *to, const void *from, unsigned long n)
 	return __copy_size;
 }
 
-/**
- * strnlen_user: - Get the size of a string in user space.
- * @s: The string to measure.
- * @n: The maximum valid length
- *
- * Context: User context only.  This function may sleep.
- *
- * Get the size of a NUL-terminated string in user space.
- *
- * Returns the size of the string INCLUDING the terminating NUL.
- * On exception, returns 0.
- * If the string is too long, returns a value greater than @n.
- */
-static inline long strnlen_user(const char __user *s, long n)
-{
-	if (!__addr_ok(s))
-		return 0;
-	else
-		return __strnlen_user(s, n);
-}
-
-/**
- * strlen_user: - Get the size of a string in user space.
- * @str: The string to measure.
- *
- * Context: User context only.  This function may sleep.
- *
- * Get the size of a NUL-terminated string in user space.
- *
- * Returns the size of the string INCLUDING the terminating NUL.
- * On exception, returns 0.
- *
- * If there is a limit on the length of a valid string, you may wish to
- * consider using strnlen_user() instead.
- */
-#define strlen_user(str)	strnlen_user(str, ~0UL >> 1)
-
 /*
  * The exception table consists of pairs of addresses: the first is the
  * address of an instruction that is allowed to fault, and the second is

arch/sh/include/asm/uaccess_32.h

@@ -170,79 +170,4 @@ __asm__ __volatile__( \
 
 extern void __put_user_unknown(void);
 
-static inline int
-__strncpy_from_user(unsigned long __dest, unsigned long __user __src, int __count)
-{
-	__kernel_size_t res;
-	unsigned long __dummy, _d, _s, _c;
-
-	__asm__ __volatile__(
-		"9:\n"
-		"mov.b	@%2+, %1\n\t"
-		"cmp/eq	#0, %1\n\t"
-		"bt/s	2f\n"
-		"1:\n"
-		"mov.b	%1, @%3\n\t"
-		"dt	%4\n\t"
-		"bf/s	9b\n\t"
-		" add	#1, %3\n\t"
-		"2:\n\t"
-		"sub	%4, %0\n"
-		"3:\n"
-		".section .fixup,\"ax\"\n"
-		"4:\n\t"
-		"mov.l	5f, %1\n\t"
-		"jmp	@%1\n\t"
-		" mov	%9, %0\n\t"
-		".balign 4\n"
-		"5:	.long 3b\n"
-		".previous\n"
-		".section __ex_table,\"a\"\n"
-		"	.balign 4\n"
-		"	.long 9b,4b\n"
-		".previous"
-		: "=r" (res), "=&z" (__dummy), "=r" (_s), "=r" (_d), "=r"(_c)
-		: "0" (__count), "2" (__src), "3" (__dest), "4" (__count),
-		  "i" (-EFAULT)
-		: "memory", "t");
-
-	return res;
-}
-
-/*
- * Return the size of a string (including the ending 0 even when we have
- * exceeded the maximum string length).
- */
-static inline long __strnlen_user(const char __user *__s, long __n)
-{
-	unsigned long res;
-	unsigned long __dummy;
-
-	__asm__ __volatile__(
-		"1:\t"
-		"mov.b	@(%0,%3), %1\n\t"
-		"cmp/eq	%4, %0\n\t"
-		"bt/s	2f\n\t"
-		" add	#1, %0\n\t"
-		"tst	%1, %1\n\t"
-		"bf	1b\n\t"
-		"2:\n"
-		".section .fixup,\"ax\"\n"
-		"3:\n\t"
-		"mov.l	4f, %1\n\t"
-		"jmp	@%1\n\t"
-		" mov	#0, %0\n"
-		".balign 4\n"
-		"4:	.long 2b\n"
-		".previous\n"
-		".section __ex_table,\"a\"\n"
-		"	.balign 4\n"
-		"	.long 1b,3b\n"
-		".previous"
-		: "=z" (res), "=&r" (__dummy)
-		: "0" (0), "r" (__s), "r" (__n)
-		: "t");
-	return res;
-}
-
 #endif /* __ASM_SH_UACCESS_32_H */

arch/sh/include/asm/uaccess_64.h

@@ -84,8 +84,4 @@ extern long __put_user_asm_l(void *, long);
 extern long __put_user_asm_q(void *, long);
 extern void __put_user_unknown(void);
 
-extern long __strnlen_user(const char *__s, long __n);
-extern int __strncpy_from_user(unsigned long __dest,
-	       unsigned long __user __src, int __count);
-
 #endif /* __ASM_SH_UACCESS_64_H */

arch/sh/include/asm/ucontext.h

@@ -1 +0,0 @@
-#include <asm-generic/ucontext.h>

arch/sh/include/asm/word-at-a-time.h

@@ -0,0 +1,53 @@
+#ifndef __ASM_SH_WORD_AT_A_TIME_H
+#define __ASM_SH_WORD_AT_A_TIME_H
+
+#ifdef CONFIG_CPU_BIG_ENDIAN
+# include <asm-generic/word-at-a-time.h>
+#else
+/*
+ * Little-endian version cribbed from x86.
+ */
+struct word_at_a_time {
+	const unsigned long one_bits, high_bits;
+};
+
+#define WORD_AT_A_TIME_CONSTANTS { REPEAT_BYTE(0x01), REPEAT_BYTE(0x80) }
+
+/* Carl Chatfield / Jan Achrenius G+ version for 32-bit */
+static inline long count_masked_bytes(long mask)
+{
+	/* (000000 0000ff 00ffff ffffff) -> ( 1 1 2 3 ) */
+	long a = (0x0ff0001+mask) >> 23;
+	/* Fix the 1 for 00 case */
+	return a & mask;
+}
+
+/* Return nonzero if it has a zero */
+static inline unsigned long has_zero(unsigned long a, unsigned long *bits, const struct word_at_a_time *c)
+{
+	unsigned long mask = ((a - c->one_bits) & ~a) & c->high_bits;
+	*bits = mask;
+	return mask;
+}
+
+static inline unsigned long prep_zero_mask(unsigned long a, unsigned long bits, const struct word_at_a_time *c)
+{
+	return bits;
+}
+
+static inline unsigned long create_zero_mask(unsigned long bits)
+{
+	bits = (bits - 1) & ~bits;
+	return bits >> 7;
+}
+
+/* The mask we created is directly usable as a bytemask */
+#define zero_bytemask(mask) (mask)
+
+static inline unsigned long find_zero(unsigned long mask)
+{
+	return count_masked_bytes(mask);
+}
+#endif
+
+#endif

arch/sh/include/asm/xor.h

@@ -1 +0,0 @@
-#include <asm-generic/xor.h>

arch/sh/include/cpu-sh2a/cpu/ubc.h

@@ -1,28 +0,0 @@
-/*
- * SH-2A UBC definitions
- *
- * Copyright (C) 2008 Kieran Bingham
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef __ASM_CPU_SH2A_UBC_H
-#define __ASM_CPU_SH2A_UBC_H
-
-#define UBC_BARA                0xfffc0400
-#define UBC_BAMRA               0xfffc0404
-#define UBC_BBRA                0xfffc04a0	/* 16 bit access */
-#define UBC_BDRA                0xfffc0408
-#define UBC_BDMRA               0xfffc040c
-
-#define UBC_BARB                0xfffc0410
-#define UBC_BAMRB               0xfffc0414
-#define UBC_BBRB                0xfffc04b0	/* 16 bit access */
-#define UBC_BDRB                0xfffc0418
-#define UBC_BDMRB               0xfffc041c
-
-#define UBC_BRCR                0xfffc04c0
-
-#endif /* __ASM_CPU_SH2A_UBC_H */

arch/sh/kernel/cpu/sh5/entry.S

@@ -1568,86 +1568,6 @@ ___clear_user_exit:
 
 #endif /* CONFIG_MMU */
 
-/*
- * int __strncpy_from_user(unsigned long __dest, unsigned long __src,
- *			   int __count)
- *
- * Inputs:
- * (r2)  target address
- * (r3)  source address
- * (r4)  maximum size in bytes
- *
- * Ouputs:
- * (*r2) copied data
- * (r2)  -EFAULT (in case of faulting)
- *       copied data (otherwise)
- */
-	.global	__strncpy_from_user
-__strncpy_from_user:
-	pta	___strncpy_from_user1, tr0
-	pta	___strncpy_from_user_done, tr1
-	or	r4, ZERO, r5		/* r5 = original count */
-	beq/u	r4, r63, tr1		/* early exit if r4==0 */
-	movi	-(EFAULT), r6		/* r6 = reply, no real fixup */
-	or	ZERO, ZERO, r7		/* r7 = data, clear top byte of data */
-
-___strncpy_from_user1:
-	ld.b	r3, 0, r7		/* Fault address: only in reading */
-	st.b	r2, 0, r7
-	addi	r2, 1, r2
-	addi	r3, 1, r3
-	beq/u	ZERO, r7, tr1
-	addi	r4, -1, r4		/* return real number of copied bytes */
-	bne/l	ZERO, r4, tr0
-
-___strncpy_from_user_done:
-	sub	r5, r4, r6		/* If done, return copied */
-
-___strncpy_from_user_exit:
-	or	r6, ZERO, r2
-	ptabs	LINK, tr0
-	blink	tr0, ZERO
-
-/*
- * extern long __strnlen_user(const char *__s, long __n)
- *
- * Inputs:
- * (r2)  source address
- * (r3)  source size in bytes
- *
- * Ouputs:
- * (r2)  -EFAULT (in case of faulting)
- *       string length (otherwise)
- */
-	.global	__strnlen_user
-__strnlen_user:
-	pta	___strnlen_user_set_reply, tr0
-	pta	___strnlen_user1, tr1
-	or	ZERO, ZERO, r5		/* r5 = counter */
-	movi	-(EFAULT), r6		/* r6 = reply, no real fixup */
-	or	ZERO, ZERO, r7		/* r7 = data, clear top byte of data */
-	beq	r3, ZERO, tr0
-
-___strnlen_user1:
-	ldx.b	r2, r5, r7		/* Fault address: only in reading */
-	addi	r3, -1, r3		/* No real fixup */
-	addi	r5, 1, r5
-	beq	r3, ZERO, tr0
-	bne	r7, ZERO, tr1
-! The line below used to be active.  This meant led to a junk byte lying between each pair
-! of entries in the argv & envp structures in memory.  Whilst the program saw the right data
-! via the argv and envp arguments to main, it meant the 'flat' representation visible through
-! /proc/$pid/cmdline was corrupt, causing trouble with ps, for example.
-!	addi	r5, 1, r5		/* Include '\0' */
-
-___strnlen_user_set_reply:
-	or	r5, ZERO, r6		/* If done, return counter */
-
-___strnlen_user_exit:
-	or	r6, ZERO, r2
-	ptabs	LINK, tr0
-	blink	tr0, ZERO
-
 /*
  * extern long __get_user_asm_?(void *val, long addr)
  *
@@ -1982,8 +1902,6 @@ asm_uaccess_start:
 	.long	___copy_user2, ___copy_user_exit
 	.long	___clear_user1, ___clear_user_exit
 #endif
-	.long	___strncpy_from_user1, ___strncpy_from_user_exit
-	.long	___strnlen_user1, ___strnlen_user_exit
 	.long	___get_user_asm_b1, ___get_user_asm_b_exit
 	.long	___get_user_asm_w1, ___get_user_asm_w_exit
 	.long	___get_user_asm_l1, ___get_user_asm_l_exit

arch/sh/kernel/process.c

@@ -4,6 +4,7 @@
 #include <linux/sched.h>
 #include <linux/export.h>
 #include <linux/stackprotector.h>
+#include <asm/fpu.h>
 
 struct kmem_cache *task_xstate_cachep = NULL;
 unsigned int xstate_size;

arch/sh/kernel/process_64.c

@@ -33,6 +33,7 @@
 #include <asm/switch_to.h>
 
 struct task_struct *last_task_used_math = NULL;
+struct pt_regs fake_swapper_regs = { 0, };
 
 void show_regs(struct pt_regs *regs)
 {

arch/sh/kernel/sh_ksyms_64.c

@@ -32,8 +32,6 @@ EXPORT_SYMBOL(__get_user_asm_b);
 EXPORT_SYMBOL(__get_user_asm_w);
 EXPORT_SYMBOL(__get_user_asm_l);
 EXPORT_SYMBOL(__get_user_asm_q);
-EXPORT_SYMBOL(__strnlen_user);
-EXPORT_SYMBOL(__strncpy_from_user);
 EXPORT_SYMBOL(__clear_user);
 EXPORT_SYMBOL(copy_page);
 EXPORT_SYMBOL(__copy_user);

arch/sparc/include/asm/cmt.h

@@ -1,59 +0,0 @@
-#ifndef _SPARC64_CMT_H
-#define _SPARC64_CMT_H
-
-/* cmt.h: Chip Multi-Threading register definitions
- *
- * Copyright (C) 2004 David S. Miller (davem@redhat.com)
- */
-
-/* ASI_CORE_ID - private */
-#define LP_ID		0x0000000000000010UL
-#define  LP_ID_MAX	0x00000000003f0000UL
-#define  LP_ID_ID	0x000000000000003fUL
-
-/* ASI_INTR_ID - private */
-#define LP_INTR_ID	0x0000000000000000UL
-#define  LP_INTR_ID_ID	0x00000000000003ffUL
-
-/* ASI_CESR_ID - private */
-#define CESR_ID		0x0000000000000040UL
-#define  CESR_ID_ID	0x00000000000000ffUL
-
-/* ASI_CORE_AVAILABLE - shared */
-#define LP_AVAIL	0x0000000000000000UL
-#define  LP_AVAIL_1	0x0000000000000002UL
-#define  LP_AVAIL_0	0x0000000000000001UL
-
-/* ASI_CORE_ENABLE_STATUS - shared */
-#define LP_ENAB_STAT	0x0000000000000010UL
-#define  LP_ENAB_STAT_1	0x0000000000000002UL
-#define  LP_ENAB_STAT_0	0x0000000000000001UL
-
-/* ASI_CORE_ENABLE - shared */
-#define LP_ENAB		0x0000000000000020UL
-#define  LP_ENAB_1	0x0000000000000002UL
-#define  LP_ENAB_0	0x0000000000000001UL
-
-/* ASI_CORE_RUNNING - shared */
-#define LP_RUNNING_RW	0x0000000000000050UL
-#define LP_RUNNING_W1S	0x0000000000000060UL
-#define LP_RUNNING_W1C	0x0000000000000068UL
-#define  LP_RUNNING_1	0x0000000000000002UL
-#define  LP_RUNNING_0	0x0000000000000001UL
-
-/* ASI_CORE_RUNNING_STAT - shared */
-#define LP_RUN_STAT	0x0000000000000058UL
-#define  LP_RUN_STAT_1	0x0000000000000002UL
-#define  LP_RUN_STAT_0	0x0000000000000001UL
-
-/* ASI_XIR_STEERING - shared */
-#define LP_XIR_STEER	0x0000000000000030UL
-#define  LP_XIR_STEER_1	0x0000000000000002UL
-#define  LP_XIR_STEER_0	0x0000000000000001UL
-
-/* ASI_CMT_ERROR_STEERING - shared */
-#define CMT_ER_STEER	0x0000000000000040UL
-#define  CMT_ER_STEER_1	0x0000000000000002UL
-#define  CMT_ER_STEER_0	0x0000000000000001UL
-
-#endif /* _SPARC64_CMT_H */

arch/sparc/include/asm/mpmbox.h

@@ -1,67 +0,0 @@
-/*
- * mpmbox.h:  Interface and defines for the OpenProm mailbox
- *               facilities for MP machines under Linux.
- *
- * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
- */
-
-#ifndef _SPARC_MPMBOX_H
-#define _SPARC_MPMBOX_H
-
-/* The prom allocates, for each CPU on the machine an unsigned
- * byte in physical ram.  You probe the device tree prom nodes
- * for these values.  The purpose of this byte is to be able to
- * pass messages from one cpu to another.
- */
-
-/* These are the main message types we have to look for in our
- * Cpu mailboxes, based upon these values we decide what course
- * of action to take.
- */
-
-/* The CPU is executing code in the kernel. */
-#define MAILBOX_ISRUNNING     0xf0
-
-/* Another CPU called romvec->pv_exit(), you should call
- * prom_stopcpu() when you see this in your mailbox.
- */
-#define MAILBOX_EXIT          0xfb
-
-/* Another CPU called romvec->pv_enter(), you should call
- * prom_cpuidle() when this is seen.
- */
-#define MAILBOX_GOSPIN        0xfc
-
-/* Another CPU has hit a breakpoint either into kadb or the prom
- * itself.  Just like MAILBOX_GOSPIN, you should call prom_cpuidle()
- * at this point.
- */
-#define MAILBOX_BPT_SPIN      0xfd
-
-/* Oh geese, some other nitwit got a damn watchdog reset.  The party's
- * over so go call prom_stopcpu().
- */
-#define MAILBOX_WDOG_STOP     0xfe
-
-#ifndef __ASSEMBLY__
-
-/* Handy macro's to determine a cpu's state. */
-
-/* Is the cpu still in Power On Self Test? */
-#define MBOX_POST_P(letter)  ((letter) >= 0x00 && (letter) <= 0x7f)
-
-/* Is the cpu at the 'ok' prompt of the PROM? */
-#define MBOX_PROMPROMPT_P(letter) ((letter) >= 0x80 && (letter) <= 0x8f)
-
-/* Is the cpu spinning in the PROM? */
-#define MBOX_PROMSPIN_P(letter) ((letter) >= 0x90 && (letter) <= 0xef)
-
-/* Sanity check... This is junk mail, throw it out. */
-#define MBOX_BOGON_P(letter) ((letter) >= 0xf1 && (letter) <= 0xfa)
-
-/* Is the cpu actively running an application/kernel-code? */
-#define MBOX_RUNNING_P(letter) ((letter) == MAILBOX_ISRUNNING)
-
-#endif /* !(__ASSEMBLY__) */
-
-#endif /* !(_SPARC_MPMBOX_H) */

arch/tile/include/asm/thread_info.h

@@ -91,11 +91,6 @@ extern void smp_nap(void);
 /* Enable interrupts racelessly and nap forever: helper for cpu_idle(). */
 extern void _cpu_idle(void);
 
-/* Switch boot idle thread to a freshly-allocated stack and free old stack. */
-extern void cpu_idle_on_new_stack(struct thread_info *old_ti,
-				  unsigned long new_sp,
-				  unsigned long new_ss10);
-
 #else /* __ASSEMBLY__ */
 
 /*

arch/tile/include/asm/uaccess.h

@@ -146,7 +146,7 @@ extern int fixup_exception(struct pt_regs *regs);
 #ifdef __tilegx__
 #define __get_user_1(x, ptr, ret) __get_user_asm(ld1u, x, ptr, ret)
 #define __get_user_2(x, ptr, ret) __get_user_asm(ld2u, x, ptr, ret)
-#define __get_user_4(x, ptr, ret) __get_user_asm(ld4u, x, ptr, ret)
+#define __get_user_4(x, ptr, ret) __get_user_asm(ld4s, x, ptr, ret)
 #define __get_user_8(x, ptr, ret) __get_user_asm(ld, x, ptr, ret)
 #else
 #define __get_user_1(x, ptr, ret) __get_user_asm(lb_u, x, ptr, ret)

arch/tile/kernel/entry.S

@@ -68,20 +68,6 @@ STD_ENTRY(KBacktraceIterator_init_current)
 	jrp lr   /* keep backtracer happy */
 	STD_ENDPROC(KBacktraceIterator_init_current)
 
-/*
- * Reset our stack to r1/r2 (sp and ksp0+cpu respectively), then
- * free the old stack (passed in r0) and re-invoke cpu_idle().
- * We update sp and ksp0 simultaneously to avoid backtracer warnings.
- */
-STD_ENTRY(cpu_idle_on_new_stack)
-	{
-	 move sp, r1
-	 mtspr SPR_SYSTEM_SAVE_K_0, r2
-	}
-	jal free_thread_info
-	j cpu_idle
-	STD_ENDPROC(cpu_idle_on_new_stack)
-
 /* Loop forever on a nap during SMP boot. */
 STD_ENTRY(smp_nap)
 	nap

arch/tile/kernel/setup.c

@@ -29,6 +29,7 @@
 #include <linux/smp.h>
 #include <linux/timex.h>
 #include <linux/hugetlb.h>
+#include <linux/start_kernel.h>
 #include <asm/setup.h>
 #include <asm/sections.h>
 #include <asm/cacheflush.h>

arch/x86/boot/header.S

@@ -94,10 +94,10 @@ bs_die:
 
 	.section ".bsdata", "a"
 bugger_off_msg:
-	.ascii	"Direct booting from floppy is no longer supported.\r\n"
-	.ascii	"Please use a boot loader program instead.\r\n"
+	.ascii	"Direct floppy boot is not supported. "
+	.ascii	"Use a boot loader program instead.\r\n"
 	.ascii	"\n"
-	.ascii	"Remove disk and press any key to reboot . . .\r\n"
+	.ascii	"Remove disk and press any key to reboot ...\r\n"
 	.byte	0
 
 #ifdef CONFIG_EFI_STUB
@@ -111,7 +111,7 @@ coff_header:
 #else
 	.word	0x8664				# x86-64
 #endif
-	.word	2				# nr_sections
+	.word	3				# nr_sections
 	.long	0 				# TimeDateStamp
 	.long	0				# PointerToSymbolTable
 	.long	1				# NumberOfSymbols
@@ -158,8 +158,8 @@ extra_header_fields:
 #else
 	.quad	0				# ImageBase
 #endif
-	.long	0x1000				# SectionAlignment
-	.long	0x200				# FileAlignment
+	.long	0x20				# SectionAlignment
+	.long	0x20				# FileAlignment
 	.word	0				# MajorOperatingSystemVersion
 	.word	0				# MinorOperatingSystemVersion
 	.word	0				# MajorImageVersion
@@ -200,8 +200,10 @@ extra_header_fields:
 
 	# Section table
 section_table:
-	.ascii	".text"
-	.byte	0
+	#
+	# The offset & size fields are filled in by build.c.
+	#
+	.ascii	".setup"
 	.byte	0
 	.byte	0
 	.long	0
@@ -217,9 +219,8 @@ section_table:
 
 	#
 	# The EFI application loader requires a relocation section
-	# because EFI applications must be relocatable. But since
-	# we don't need the loader to fixup any relocs for us, we
-	# just create an empty (zero-length) .reloc section header.
+	# because EFI applications must be relocatable. The .reloc
+	# offset & size fields are filled in by build.c.
 	#
 	.ascii	".reloc"
 	.byte	0
@@ -233,6 +234,25 @@ section_table:
 	.word	0				# NumberOfRelocations
 	.word	0				# NumberOfLineNumbers
 	.long	0x42100040			# Characteristics (section flags)
+
+	#
+	# The offset & size fields are filled in by build.c.
+	#
+	.ascii	".text"
+	.byte	0
+	.byte	0
+	.byte	0
+	.long	0
+	.long	0x0				# startup_{32,64}
+	.long	0				# Size of initialized data
+						# on disk
+	.long	0x0				# startup_{32,64}
+	.long	0				# PointerToRelocations
+	.long	0				# PointerToLineNumbers
+	.word	0				# NumberOfRelocations
+	.word	0				# NumberOfLineNumbers
+	.long	0x60500020			# Characteristics (section flags)
+
 #endif /* CONFIG_EFI_STUB */
 
 	# Kernel attributes; used by setup.  This is part 1 of the

arch/x86/boot/tools/build.c

@@ -50,6 +50,8 @@ typedef unsigned int   u32;
 u8 buf[SETUP_SECT_MAX*512];
 int is_big_kernel;
 
+#define PECOFF_RELOC_RESERVE 0x20
+
 /*----------------------------------------------------------------------*/
 
 static const u32 crctab32[] = {
@@ -133,11 +135,103 @@ static void usage(void)
 	die("Usage: build setup system [> image]");
 }
 
-int main(int argc, char ** argv)
-{
 #ifdef CONFIG_EFI_STUB
-	unsigned int file_sz, pe_header;
+
+static void update_pecoff_section_header(char *section_name, u32 offset, u32 size)
+{
+	unsigned int pe_header;
+	unsigned short num_sections;
+	u8 *section;
+
+	pe_header = get_unaligned_le32(&buf[0x3c]);
+	num_sections = get_unaligned_le16(&buf[pe_header + 6]);
+
+#ifdef CONFIG_X86_32
+	section = &buf[pe_header + 0xa8];
+#else
+	section = &buf[pe_header + 0xb8];
 #endif
+
+	while (num_sections > 0) {
+		if (strncmp((char*)section, section_name, 8) == 0) {
+			/* section header size field */
+			put_unaligned_le32(size, section + 0x8);
+
+			/* section header vma field */
+			put_unaligned_le32(offset, section + 0xc);
+
+			/* section header 'size of initialised data' field */
+			put_unaligned_le32(size, section + 0x10);
+
+			/* section header 'file offset' field */
+			put_unaligned_le32(offset, section + 0x14);
+
+			break;
+		}
+		section += 0x28;
+		num_sections--;
+	}
+}
+
+static void update_pecoff_setup_and_reloc(unsigned int size)
+{
+	u32 setup_offset = 0x200;
+	u32 reloc_offset = size - PECOFF_RELOC_RESERVE;
+	u32 setup_size = reloc_offset - setup_offset;
+
+	update_pecoff_section_header(".setup", setup_offset, setup_size);
+	update_pecoff_section_header(".reloc", reloc_offset, PECOFF_RELOC_RESERVE);
+
+	/*
+	 * Modify .reloc section contents with a single entry. The
+	 * relocation is applied to offset 10 of the relocation section.
+	 */
+	put_unaligned_le32(reloc_offset + 10, &buf[reloc_offset]);
+	put_unaligned_le32(10, &buf[reloc_offset + 4]);
+}
+
+static void update_pecoff_text(unsigned int text_start, unsigned int file_sz)
+{
+	unsigned int pe_header;
+	unsigned int text_sz = file_sz - text_start;
+
+	pe_header = get_unaligned_le32(&buf[0x3c]);
+
+	/* Size of image */
+	put_unaligned_le32(file_sz, &buf[pe_header + 0x50]);
+
+	/*
+	 * Size of code: Subtract the size of the first sector (512 bytes)
+	 * which includes the header.
+	 */
+	put_unaligned_le32(file_sz - 512, &buf[pe_header + 0x1c]);
+
+#ifdef CONFIG_X86_32
+	/*
+	 * Address of entry point.
+	 *
+	 * The EFI stub entry point is +16 bytes from the start of
+	 * the .text section.
+	 */
+	put_unaligned_le32(text_start + 16, &buf[pe_header + 0x28]);
+#else
+	/*
+	 * Address of entry point. startup_32 is at the beginning and
+	 * the 64-bit entry point (startup_64) is always 512 bytes
+	 * after. The EFI stub entry point is 16 bytes after that, as
+	 * the first instruction allows legacy loaders to jump over
+	 * the EFI stub initialisation
+	 */
+	put_unaligned_le32(text_start + 528, &buf[pe_header + 0x28]);
+#endif /* CONFIG_X86_32 */
+
+	update_pecoff_section_header(".text", text_start, text_sz);
+}
+
+#endif /* CONFIG_EFI_STUB */
+
+int main(int argc, char ** argv)
+{
 	unsigned int i, sz, setup_sectors;
 	int c;
 	u32 sys_size;
@@ -163,6 +257,12 @@ int main(int argc, char ** argv)
 		die("Boot block hasn't got boot flag (0xAA55)");
 	fclose(file);
 
+#ifdef CONFIG_EFI_STUB
+	/* Reserve 0x20 bytes for .reloc section */
+	memset(buf+c, 0, PECOFF_RELOC_RESERVE);
+	c += PECOFF_RELOC_RESERVE;
+#endif
+
 	/* Pad unused space with zeros */
 	setup_sectors = (c + 511) / 512;
 	if (setup_sectors < SETUP_SECT_MIN)
@@ -170,6 +270,10 @@ int main(int argc, char ** argv)
 	i = setup_sectors*512;
 	memset(buf+c, 0, i-c);
 
+#ifdef CONFIG_EFI_STUB
+	update_pecoff_setup_and_reloc(i);
+#endif
+
 	/* Set the default root device */
 	put_unaligned_le16(DEFAULT_ROOT_DEV, &buf[508]);
 
@@ -194,66 +298,8 @@ int main(int argc, char ** argv)
 	put_unaligned_le32(sys_size, &buf[0x1f4]);
 
 #ifdef CONFIG_EFI_STUB
-	file_sz = sz + i + ((sys_size * 16) - sz);
-
-	pe_header = get_unaligned_le32(&buf[0x3c]);
-
-	/* Size of image */
-	put_unaligned_le32(file_sz, &buf[pe_header + 0x50]);
-
-	/*
-	 * Subtract the size of the first section (512 bytes) which
-	 * includes the header and .reloc section. The remaining size
-	 * is that of the .text section.
-	 */
-	file_sz -= 512;
-
-	/* Size of code */
-	put_unaligned_le32(file_sz, &buf[pe_header + 0x1c]);
-
-#ifdef CONFIG_X86_32
-	/*
-	 * Address of entry point.
-	 *
-	 * The EFI stub entry point is +16 bytes from the start of
-	 * the .text section.
-	 */
-	put_unaligned_le32(i + 16, &buf[pe_header + 0x28]);
-
-	/* .text size */
-	put_unaligned_le32(file_sz, &buf[pe_header + 0xb0]);
-
-	/* .text vma */
-	put_unaligned_le32(0x200, &buf[pe_header + 0xb4]);
-
-	/* .text size of initialised data */
-	put_unaligned_le32(file_sz, &buf[pe_header + 0xb8]);
-
-	/* .text file offset */
-	put_unaligned_le32(0x200, &buf[pe_header + 0xbc]);
-#else
-	/*
-	 * Address of entry point. startup_32 is at the beginning and
-	 * the 64-bit entry point (startup_64) is always 512 bytes
-	 * after. The EFI stub entry point is 16 bytes after that, as
-	 * the first instruction allows legacy loaders to jump over
-	 * the EFI stub initialisation
-	 */
-	put_unaligned_le32(i + 528, &buf[pe_header + 0x28]);
-
-	/* .text size */
-	put_unaligned_le32(file_sz, &buf[pe_header + 0xc0]);
-
-	/* .text vma */
-	put_unaligned_le32(0x200, &buf[pe_header + 0xc4]);
-
-	/* .text size of initialised data */
-	put_unaligned_le32(file_sz, &buf[pe_header + 0xc8]);
-
-	/* .text file offset */
-	put_unaligned_le32(0x200, &buf[pe_header + 0xcc]);
-#endif /* CONFIG_X86_32 */
-#endif /* CONFIG_EFI_STUB */
+	update_pecoff_text(setup_sectors * 512, sz + i + ((sys_size * 16) - sz));
+#endif
 
 	crc = partial_crc32(buf, i, crc);
 	if (fwrite(buf, 1, i, stdout) != i)

arch/x86/crypto/aesni-intel_asm.S

@@ -2460,10 +2460,12 @@ ENTRY(aesni_cbc_dec)
 	pxor IN3, STATE4
 	movaps IN4, IV
 #else
-	pxor (INP), STATE2
-	pxor 0x10(INP), STATE3
 	pxor IN1, STATE4
 	movaps IN2, IV
+	movups (INP), IN1
+	pxor IN1, STATE2
+	movups 0x10(INP), IN2
+	pxor IN2, STATE3
 #endif
 	movups STATE1, (OUTP)
 	movups STATE2, 0x10(OUTP)

arch/x86/include/asm/nmi.h

@@ -54,6 +54,20 @@ struct nmiaction {
 	__register_nmi_handler((t), &fn##_na);	\
 })
 
+/*
+ * For special handlers that register/unregister in the
+ * init section only.  This should be considered rare.
+ */
+#define register_nmi_handler_initonly(t, fn, fg, n)		\
+({							\
+	static struct nmiaction fn##_na __initdata = {		\
+		.handler = (fn),			\
+		.name = (n),				\
+		.flags = (fg),				\
+	};						\
+	__register_nmi_handler((t), &fn##_na);	\
+})
+
 int __register_nmi_handler(unsigned int, struct nmiaction *);
 
 void unregister_nmi_handler(unsigned int, const char *);

arch/x86/include/asm/uaccess.h

@@ -33,9 +33,8 @@
 #define segment_eq(a, b)	((a).seg == (b).seg)
 
 #define user_addr_max() (current_thread_info()->addr_limit.seg)
-#define __addr_ok(addr)					\
-	((unsigned long __force)(addr) <		\
-	 (current_thread_info()->addr_limit.seg))
+#define __addr_ok(addr) 	\
+	((unsigned long __force)(addr) < user_addr_max())
 
 /*
  * Test whether a block of memory is a valid user space address.
@@ -47,14 +46,14 @@
  * This needs 33-bit (65-bit for x86_64) arithmetic. We have a carry...
  */
 
-#define __range_not_ok(addr, size)					\
+#define __range_not_ok(addr, size, limit)				\
 ({									\
 	unsigned long flag, roksum;					\
 	__chk_user_ptr(addr);						\
 	asm("add %3,%1 ; sbb %0,%0 ; cmp %1,%4 ; sbb $0,%0"		\
 	    : "=&r" (flag), "=r" (roksum)				\
 	    : "1" (addr), "g" ((long)(size)),				\
-	      "rm" (current_thread_info()->addr_limit.seg));		\
+	      "rm" (limit));						\
 	flag;								\
 })
 
@@ -77,7 +76,8 @@
  * checks that the pointer is in the user space range - after calling
  * this function, memory access functions may still return -EFAULT.
  */
-#define access_ok(type, addr, size) (likely(__range_not_ok(addr, size) == 0))
+#define access_ok(type, addr, size) \
+	(likely(__range_not_ok(addr, size, user_addr_max()) == 0))
 
 /*
  * The exception table consists of pairs of addresses relative to the

arch/x86/include/asm/uv/uv_bau.h

@@ -149,7 +149,6 @@
 /* 4 bits of software ack period */
 #define UV2_ACK_MASK			0x7UL
 #define UV2_ACK_UNITS_SHFT		3
-#define UV2_LEG_SHFT UV2H_LB_BAU_MISC_CONTROL_USE_LEGACY_DESCRIPTOR_FORMATS_SHFT
 #define UV2_EXT_SHFT UV2H_LB_BAU_MISC_CONTROL_ENABLE_EXTENDED_SB_STATUS_SHFT
 
 /*

arch/x86/kernel/aperture_64.c

@@ -20,7 +20,6 @@
 #include <linux/bitops.h>
 #include <linux/ioport.h>
 #include <linux/suspend.h>
-#include <linux/kmemleak.h>
 #include <asm/e820.h>
 #include <asm/io.h>
 #include <asm/iommu.h>
@@ -95,11 +94,6 @@ static u32 __init allocate_aperture(void)
 		return 0;
 	}
 	memblock_reserve(addr, aper_size);
-	/*
-	 * Kmemleak should not scan this block as it may not be mapped via the
-	 * kernel direct mapping.
-	 */
-	kmemleak_ignore(phys_to_virt(addr));
 	printk(KERN_INFO "Mapping aperture over %d KB of RAM @ %lx\n",
 			aper_size >> 10, addr);
 	insert_aperture_resource((u32)addr, aper_size);

arch/x86/kernel/apic/io_apic.c

@@ -1195,7 +1195,7 @@ static void __clear_irq_vector(int irq, struct irq_cfg *cfg)
 	BUG_ON(!cfg->vector);
 
 	vector = cfg->vector;
-	for_each_cpu_and(cpu, cfg->domain, cpu_online_mask)
+	for_each_cpu(cpu, cfg->domain)
 		per_cpu(vector_irq, cpu)[vector] = -1;
 
 	cfg->vector = 0;
@@ -1203,7 +1203,7 @@ static void __clear_irq_vector(int irq, struct irq_cfg *cfg)
 
 	if (likely(!cfg->move_in_progress))
 		return;
-	for_each_cpu_and(cpu, cfg->old_domain, cpu_online_mask) {
+	for_each_cpu(cpu, cfg->old_domain) {
 		for (vector = FIRST_EXTERNAL_VECTOR; vector < NR_VECTORS;
 								vector++) {
 			if (per_cpu(vector_irq, cpu)[vector] != irq)

arch/x86/kernel/cpu/mcheck/mce.c

@@ -1274,7 +1274,7 @@ static void mce_timer_fn(unsigned long data)
 	 */
 	iv = __this_cpu_read(mce_next_interval);
 	if (mce_notify_irq())
-		iv = max(iv, (unsigned long) HZ/100);
+		iv = max(iv / 2, (unsigned long) HZ/100);
 	else
 		iv = min(iv * 2, round_jiffies_relative(check_interval * HZ));
 	__this_cpu_write(mce_next_interval, iv);
@@ -1557,7 +1557,7 @@ static void __mcheck_cpu_init_vendor(struct cpuinfo_x86 *c)
 static void __mcheck_cpu_init_timer(void)
 {
 	struct timer_list *t = &__get_cpu_var(mce_timer);
-	unsigned long iv = __this_cpu_read(mce_next_interval);
+	unsigned long iv = check_interval * HZ;
 
 	setup_timer(t, mce_timer_fn, smp_processor_id());
 

arch/x86/kernel/cpu/perf_event.c

@@ -1496,6 +1496,7 @@ static struct cpu_hw_events *allocate_fake_cpuc(void)
 		if (!cpuc->shared_regs)
 			goto error;
 	}
+	cpuc->is_fake = 1;
 	return cpuc;
 error:
 	free_fake_cpuc(cpuc);
@@ -1756,6 +1757,12 @@ perf_callchain_kernel(struct perf_callchain_entry *entry, struct pt_regs *regs)
 	dump_trace(NULL, regs, NULL, 0, &backtrace_ops, entry);
 }
 
+static inline int
+valid_user_frame(const void __user *fp, unsigned long size)
+{
+	return (__range_not_ok(fp, size, TASK_SIZE) == 0);
+}
+
 #ifdef CONFIG_COMPAT
 
 #include <asm/compat.h>
@@ -1780,7 +1787,7 @@ perf_callchain_user32(struct pt_regs *regs, struct perf_callchain_entry *entry)
 		if (bytes != sizeof(frame))
 			break;
 
-		if (fp < compat_ptr(regs->sp))
+		if (!valid_user_frame(fp, sizeof(frame)))
 			break;
 
 		perf_callchain_store(entry, frame.return_address);
@@ -1826,7 +1833,7 @@ perf_callchain_user(struct perf_callchain_entry *entry, struct pt_regs *regs)
 		if (bytes != sizeof(frame))
 			break;
 
-		if ((unsigned long)fp < regs->sp)
+		if (!valid_user_frame(fp, sizeof(frame)))
 			break;
 
 		perf_callchain_store(entry, frame.return_address);

arch/x86/kernel/cpu/perf_event.h

@@ -117,6 +117,7 @@ struct cpu_hw_events {
 	struct perf_event	*event_list[X86_PMC_IDX_MAX]; /* in enabled order */
 
 	unsigned int		group_flag;
+	int			is_fake;
 
 	/*
 	 * Intel DebugStore bits
@@ -364,6 +365,7 @@ struct x86_pmu {
 	int		pebs_record_size;
 	void		(*drain_pebs)(struct pt_regs *regs);
 	struct event_constraint *pebs_constraints;
+	void		(*pebs_aliases)(struct perf_event *event);
 
 	/*
 	 * Intel LBR

arch/x86/kernel/cpu/perf_event_intel.c

@@ -1119,27 +1119,33 @@ intel_bts_constraints(struct perf_event *event)
 	return NULL;
 }
 
-static bool intel_try_alt_er(struct perf_event *event, int orig_idx)
+static int intel_alt_er(int idx)
 {
 	if (!(x86_pmu.er_flags & ERF_HAS_RSP_1))
-		return false;
+		return idx;
 
-	if (event->hw.extra_reg.idx == EXTRA_REG_RSP_0) {
-		event->hw.config &= ~INTEL_ARCH_EVENT_MASK;
-		event->hw.config |= 0x01bb;
-		event->hw.extra_reg.idx = EXTRA_REG_RSP_1;
-		event->hw.extra_reg.reg = MSR_OFFCORE_RSP_1;
-	} else if (event->hw.extra_reg.idx == EXTRA_REG_RSP_1) {
+	if (idx == EXTRA_REG_RSP_0)
+		return EXTRA_REG_RSP_1;
+
+	if (idx == EXTRA_REG_RSP_1)
+		return EXTRA_REG_RSP_0;
+
+	return idx;
+}
+
+static void intel_fixup_er(struct perf_event *event, int idx)
+{
+	event->hw.extra_reg.idx = idx;
+
+	if (idx == EXTRA_REG_RSP_0) {
 		event->hw.config &= ~INTEL_ARCH_EVENT_MASK;
 		event->hw.config |= 0x01b7;
-		event->hw.extra_reg.idx = EXTRA_REG_RSP_0;
 		event->hw.extra_reg.reg = MSR_OFFCORE_RSP_0;
+	} else if (idx == EXTRA_REG_RSP_1) {
+		event->hw.config &= ~INTEL_ARCH_EVENT_MASK;
+		event->hw.config |= 0x01bb;
+		event->hw.extra_reg.reg = MSR_OFFCORE_RSP_1;
 	}
-
-	if (event->hw.extra_reg.idx == orig_idx)
-		return false;
-
-	return true;
 }
 
 /*
@@ -1157,14 +1163,18 @@ __intel_shared_reg_get_constraints(struct cpu_hw_events *cpuc,
 	struct event_constraint *c = &emptyconstraint;
 	struct er_account *era;
 	unsigned long flags;
-	int orig_idx = reg->idx;
+	int idx = reg->idx;
 
-	/* already allocated shared msr */
-	if (reg->alloc)
+	/*
+	 * reg->alloc can be set due to existing state, so for fake cpuc we
+	 * need to ignore this, otherwise we might fail to allocate proper fake
+	 * state for this extra reg constraint. Also see the comment below.
+	 */
+	if (reg->alloc && !cpuc->is_fake)
 		return NULL; /* call x86_get_event_constraint() */
 
 again:
-	era = &cpuc->shared_regs->regs[reg->idx];
+	era = &cpuc->shared_regs->regs[idx];
 	/*
 	 * we use spin_lock_irqsave() to avoid lockdep issues when
 	 * passing a fake cpuc
@@ -1173,6 +1183,29 @@ again:
 
 	if (!atomic_read(&era->ref) || era->config == reg->config) {
 
+		/*
+		 * If its a fake cpuc -- as per validate_{group,event}() we
+		 * shouldn't touch event state and we can avoid doing so
+		 * since both will only call get_event_constraints() once
+		 * on each event, this avoids the need for reg->alloc.
+		 *
+		 * Not doing the ER fixup will only result in era->reg being
+		 * wrong, but since we won't actually try and program hardware
+		 * this isn't a problem either.
+		 */
+		if (!cpuc->is_fake) {
+			if (idx != reg->idx)
+				intel_fixup_er(event, idx);
+
+			/*
+			 * x86_schedule_events() can call get_event_constraints()
+			 * multiple times on events in the case of incremental
+			 * scheduling(). reg->alloc ensures we only do the ER
+			 * allocation once.
+			 */
+			reg->alloc = 1;
+		}
+
 		/* lock in msr value */
 		era->config = reg->config;
 		era->reg = reg->reg;
@@ -1180,17 +1213,17 @@ again:
 		/* one more user */
 		atomic_inc(&era->ref);
 
-		/* no need to reallocate during incremental event scheduling */
-		reg->alloc = 1;
-
 		/*
 		 * need to call x86_get_event_constraint()
 		 * to check if associated event has constraints
 		 */
 		c = NULL;
-	} else if (intel_try_alt_er(event, orig_idx)) {
-		raw_spin_unlock_irqrestore(&era->lock, flags);
-		goto again;
+	} else {
+		idx = intel_alt_er(idx);
+		if (idx != reg->idx) {
+			raw_spin_unlock_irqrestore(&era->lock, flags);
+			goto again;
+		}
 	}
 	raw_spin_unlock_irqrestore(&era->lock, flags);
 
@@ -1204,11 +1237,14 @@ __intel_shared_reg_put_constraints(struct cpu_hw_events *cpuc,
 	struct er_account *era;
 
 	/*
-	 * only put constraint if extra reg was actually
-	 * allocated. Also takes care of event which do
-	 * not use an extra shared reg
+	 * Only put constraint if extra reg was actually allocated. Also takes
+	 * care of event which do not use an extra shared reg.
+	 *
+	 * Also, if this is a fake cpuc we shouldn't touch any event state
+	 * (reg->alloc) and we don't care about leaving inconsistent cpuc state
+	 * either since it'll be thrown out.
 	 */
-	if (!reg->alloc)
+	if (!reg->alloc || cpuc->is_fake)
 		return;
 
 	era = &cpuc->shared_regs->regs[reg->idx];
@@ -1300,15 +1336,9 @@ static void intel_put_event_constraints(struct cpu_hw_events *cpuc,
 	intel_put_shared_regs_event_constraints(cpuc, event);
 }
 
-static int intel_pmu_hw_config(struct perf_event *event)
+static void intel_pebs_aliases_core2(struct perf_event *event)
 {
-	int ret = x86_pmu_hw_config(event);
-
-	if (ret)
-		return ret;
-
-	if (event->attr.precise_ip &&
-	    (event->hw.config & X86_RAW_EVENT_MASK) == 0x003c) {
+	if ((event->hw.config & X86_RAW_EVENT_MASK) == 0x003c) {
 		/*
 		 * Use an alternative encoding for CPU_CLK_UNHALTED.THREAD_P
 		 * (0x003c) so that we can use it with PEBS.
@@ -1329,10 +1359,48 @@ static int intel_pmu_hw_config(struct perf_event *event)
 		 */
 		u64 alt_config = X86_CONFIG(.event=0xc0, .inv=1, .cmask=16);
 
+		alt_config |= (event->hw.config & ~X86_RAW_EVENT_MASK);
+		event->hw.config = alt_config;
+	}
+}
+
+static void intel_pebs_aliases_snb(struct perf_event *event)
+{
+	if ((event->hw.config & X86_RAW_EVENT_MASK) == 0x003c) {
+		/*
+		 * Use an alternative encoding for CPU_CLK_UNHALTED.THREAD_P
+		 * (0x003c) so that we can use it with PEBS.
+		 *
+		 * The regular CPU_CLK_UNHALTED.THREAD_P event (0x003c) isn't
+		 * PEBS capable. However we can use UOPS_RETIRED.ALL
+		 * (0x01c2), which is a PEBS capable event, to get the same
+		 * count.
+		 *
+		 * UOPS_RETIRED.ALL counts the number of cycles that retires
+		 * CNTMASK micro-ops. By setting CNTMASK to a value (16)
+		 * larger than the maximum number of micro-ops that can be
+		 * retired per cycle (4) and then inverting the condition, we
+		 * count all cycles that retire 16 or less micro-ops, which
+		 * is every cycle.
+		 *
+		 * Thereby we gain a PEBS capable cycle counter.
+		 */
+		u64 alt_config = X86_CONFIG(.event=0xc2, .umask=0x01, .inv=1, .cmask=16);
 
 		alt_config |= (event->hw.config & ~X86_RAW_EVENT_MASK);
 		event->hw.config = alt_config;
 	}
+}
+
+static int intel_pmu_hw_config(struct perf_event *event)
+{
+	int ret = x86_pmu_hw_config(event);
+
+	if (ret)
+		return ret;
+
+	if (event->attr.precise_ip && x86_pmu.pebs_aliases)
+		x86_pmu.pebs_aliases(event);
 
 	if (intel_pmu_needs_lbr_smpl(event)) {
 		ret = intel_pmu_setup_lbr_filter(event);
@@ -1607,6 +1675,7 @@ static __initconst const struct x86_pmu intel_pmu = {
 	.max_period		= (1ULL << 31) - 1,
 	.get_event_constraints	= intel_get_event_constraints,
 	.put_event_constraints	= intel_put_event_constraints,
+	.pebs_aliases		= intel_pebs_aliases_core2,
 
 	.format_attrs		= intel_arch3_formats_attr,
 
@@ -1840,8 +1909,9 @@ __init int intel_pmu_init(void)
 		break;
 
 	case 42: /* SandyBridge */
-		x86_add_quirk(intel_sandybridge_quirk);
 	case 45: /* SandyBridge, "Romely-EP" */
+		x86_add_quirk(intel_sandybridge_quirk);
+	case 58: /* IvyBridge */
 		memcpy(hw_cache_event_ids, snb_hw_cache_event_ids,
 		       sizeof(hw_cache_event_ids));
 
@@ -1849,6 +1919,7 @@ __init int intel_pmu_init(void)
 
 		x86_pmu.event_constraints = intel_snb_event_constraints;
 		x86_pmu.pebs_constraints = intel_snb_pebs_event_constraints;
+		x86_pmu.pebs_aliases = intel_pebs_aliases_snb;
 		x86_pmu.extra_regs = intel_snb_extra_regs;
 		/* all extra regs are per-cpu when HT is on */
 		x86_pmu.er_flags |= ERF_HAS_RSP_1;

arch/x86/kernel/cpu/perf_event_intel_ds.c

@@ -400,14 +400,7 @@ struct event_constraint intel_snb_pebs_event_constraints[] = {
 	INTEL_EVENT_CONSTRAINT(0xc4, 0xf),    /* BR_INST_RETIRED.* */
 	INTEL_EVENT_CONSTRAINT(0xc5, 0xf),    /* BR_MISP_RETIRED.* */
 	INTEL_EVENT_CONSTRAINT(0xcd, 0x8),    /* MEM_TRANS_RETIRED.* */
-	INTEL_UEVENT_CONSTRAINT(0x11d0, 0xf), /* MEM_UOP_RETIRED.STLB_MISS_LOADS */
-	INTEL_UEVENT_CONSTRAINT(0x12d0, 0xf), /* MEM_UOP_RETIRED.STLB_MISS_STORES */
-	INTEL_UEVENT_CONSTRAINT(0x21d0, 0xf), /* MEM_UOP_RETIRED.LOCK_LOADS */
-	INTEL_UEVENT_CONSTRAINT(0x22d0, 0xf), /* MEM_UOP_RETIRED.LOCK_STORES */
-	INTEL_UEVENT_CONSTRAINT(0x41d0, 0xf), /* MEM_UOP_RETIRED.SPLIT_LOADS */
-	INTEL_UEVENT_CONSTRAINT(0x42d0, 0xf), /* MEM_UOP_RETIRED.SPLIT_STORES */
-	INTEL_UEVENT_CONSTRAINT(0x81d0, 0xf), /* MEM_UOP_RETIRED.ANY_LOADS */
-	INTEL_UEVENT_CONSTRAINT(0x82d0, 0xf), /* MEM_UOP_RETIRED.ANY_STORES */
+	INTEL_EVENT_CONSTRAINT(0xd0, 0xf),    /* MEM_UOP_RETIRED.* */
 	INTEL_EVENT_CONSTRAINT(0xd1, 0xf),    /* MEM_LOAD_UOPS_RETIRED.* */
 	INTEL_EVENT_CONSTRAINT(0xd2, 0xf),    /* MEM_LOAD_UOPS_LLC_HIT_RETIRED.* */
 	INTEL_UEVENT_CONSTRAINT(0x02d4, 0xf), /* MEM_LOAD_UOPS_MISC_RETIRED.LLC_MISS */

arch/x86/kernel/kvmclock.c

@@ -120,11 +120,6 @@ bool kvm_check_and_clear_guest_paused(void)
 	bool ret = false;
 	struct pvclock_vcpu_time_info *src;
 
-	/*
-	 * per_cpu() is safe here because this function is only called from
-	 * timer functions where preemption is already disabled.
-	 */
-	WARN_ON(!in_atomic());
 	src = &__get_cpu_var(hv_clock);
 	if ((src->flags & PVCLOCK_GUEST_STOPPED) != 0) {
 		__this_cpu_and(hv_clock.flags, ~PVCLOCK_GUEST_STOPPED);

arch/x86/kernel/nmi_selftest.c

@@ -42,7 +42,7 @@ static int __init nmi_unk_cb(unsigned int val, struct pt_regs *regs)
 static void __init init_nmi_testsuite(void)
 {
 	/* trap all the unknown NMIs we may generate */
-	register_nmi_handler(NMI_UNKNOWN, nmi_unk_cb, 0, "nmi_selftest_unk");
+	register_nmi_handler_initonly(NMI_UNKNOWN, nmi_unk_cb, 0, "nmi_selftest_unk");
 }
 
 static void __init cleanup_nmi_testsuite(void)
@@ -64,7 +64,7 @@ static void __init test_nmi_ipi(struct cpumask *mask)
 {
 	unsigned long timeout;
 
-	if (register_nmi_handler(NMI_LOCAL, test_nmi_ipi_callback,
+	if (register_nmi_handler_initonly(NMI_LOCAL, test_nmi_ipi_callback,
 				 NMI_FLAG_FIRST, "nmi_selftest")) {
 		nmi_fail = FAILURE;
 		return;

arch/x86/kernel/pci-dma.c

@@ -100,7 +100,7 @@ void *dma_generic_alloc_coherent(struct device *dev, size_t size,
 				 struct dma_attrs *attrs)
 {
 	unsigned long dma_mask;
-	struct page *page = NULL;
+	struct page *page;
 	unsigned int count = PAGE_ALIGN(size) >> PAGE_SHIFT;
 	dma_addr_t addr;
 
@@ -108,6 +108,7 @@ void *dma_generic_alloc_coherent(struct device *dev, size_t size,
 
 	flag |= __GFP_ZERO;
 again:
+	page = NULL;
 	if (!(flag & GFP_ATOMIC))
 		page = dma_alloc_from_contiguous(dev, count, get_order(size));
 	if (!page)

arch/x86/kernel/reboot.c

@@ -639,9 +639,11 @@ void native_machine_shutdown(void)
 	set_cpus_allowed_ptr(current, cpumask_of(reboot_cpu_id));
 
 	/*
-	 * O.K Now that I'm on the appropriate processor,
-	 * stop all of the others.
+	 * O.K Now that I'm on the appropriate processor, stop all of the
+	 * others. Also disable the local irq to not receive the per-cpu
+	 * timer interrupt which may trigger scheduler's load balance.
 	 */
+	local_irq_disable();
 	stop_other_cpus();
 #endif
 

arch/x86/kernel/smpboot.c

@@ -349,9 +349,12 @@ static bool __cpuinit match_llc(struct cpuinfo_x86 *c, struct cpuinfo_x86 *o)
 
 static bool __cpuinit match_mc(struct cpuinfo_x86 *c, struct cpuinfo_x86 *o)
 {
-	if (c->phys_proc_id == o->phys_proc_id)
-		return topology_sane(c, o, "mc");
+	if (c->phys_proc_id == o->phys_proc_id) {
+		if (cpu_has(c, X86_FEATURE_AMD_DCM))
+			return true;
 
+		return topology_sane(c, o, "mc");
+	}
 	return false;
 }
 
@@ -382,6 +385,15 @@ void __cpuinit set_cpu_sibling_map(int cpu)
 		if ((i == cpu) || (has_mc && match_llc(c, o)))
 			link_mask(llc_shared, cpu, i);
 
+	}
+
+	/*
+	 * This needs a separate iteration over the cpus because we rely on all
+	 * cpu_sibling_mask links to be set-up.
+	 */
+	for_each_cpu(i, cpu_sibling_setup_mask) {
+		o = &cpu_data(i);
+
 		if ((i == cpu) || (has_mc && match_mc(c, o))) {
 			link_mask(core, cpu, i);
 
@@ -410,15 +422,7 @@ void __cpuinit set_cpu_sibling_map(int cpu)
 /* maps the cpu to the sched domain representing multi-core */
 const struct cpumask *cpu_coregroup_mask(int cpu)
 {
-	struct cpuinfo_x86 *c = &cpu_data(cpu);
-	/*
-	 * For perf, we return last level cache shared map.
-	 * And for power savings, we return cpu_core_map
-	 */
-	if (!(cpu_has(c, X86_FEATURE_AMD_DCM)))
-		return cpu_core_mask(cpu);
-	else
-		return cpu_llc_shared_mask(cpu);
+	return cpu_llc_shared_mask(cpu);
 }
 
 static void impress_friends(void)

arch/x86/lib/usercopy.c

@@ -8,6 +8,7 @@
 #include <linux/module.h>
 
 #include <asm/word-at-a-time.h>
+#include <linux/sched.h>
 
 /*
  * best effort, GUP based copy_from_user() that is NMI-safe
@@ -21,6 +22,9 @@ copy_from_user_nmi(void *to, const void __user *from, unsigned long n)
 	void *map;
 	int ret;
 
+	if (__range_not_ok(from, n, TASK_SIZE))
+		return len;
+
 	do {
 		ret = __get_user_pages_fast(addr, 1, 0, &page);
 		if (!ret)