Merge branch 'next/board-samsung' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/boards

From Kukjin Kim <kgene.kim@samsung.com>:

* 'next/board-samsung' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
  ARM: S3C64XX: Add IRQ mapping for wm0010 on Cragganmore
  ARM: S5PV210: Add HSOTG support to SMDKV210
  ARM: EXYNOS: Update keypad entries for SMDK4X12
  ARM: S3C64XX: Dynamically assign interrupts for CPU PMIC on Cragganmore
  ARM: S3C64XX: Dynamically allocate the IRQ range for WM8994 on Cragganmore
  ARM: S3C64XX: Add WM5102 EVM to Cragganmore modules
  ARM: S3C64XX: Add module identification for Balblair Cragganmore module
  ARM: EXYNOS: Add HSOTG support to SMDKV310
  ARM: EXYNOS: Add HSOTG support to Origen

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

arch/arm/mach-exynos/Kconfig

@@ -207,6 +207,7 @@ config MACH_SMDKV310
 	select S3C_DEV_HSMMC1
 	select S3C_DEV_HSMMC2
 	select S3C_DEV_HSMMC3
+	select S3C_DEV_USB_HSOTG
 	select SAMSUNG_DEV_BACKLIGHT
 	select EXYNOS_DEV_DRM
 	select EXYNOS_DEV_SYSMMU
@@ -326,6 +327,7 @@ config MACH_ORIGEN
 	select S3C_DEV_WDT
 	select S3C_DEV_HSMMC
 	select S3C_DEV_HSMMC2
+	select S3C_DEV_USB_HSOTG
 	select S5P_DEV_FIMC0
 	select S5P_DEV_FIMC1
 	select S5P_DEV_FIMC2

arch/arm/mach-exynos/mach-origen.c

@@ -21,6 +21,7 @@
 #include <linux/mfd/max8997.h>
 #include <linux/lcd.h>
 #include <linux/rfkill-gpio.h>
+#include <linux/platform_data/s3c-hsotg.h>
 
 #include <asm/mach/arch.h>
 #include <asm/hardware/gic.h>
@@ -499,6 +500,9 @@ static void __init origen_ohci_init(void)
 	exynos4_ohci_set_platdata(pdata);
 }
 
+/* USB OTG */
+static struct s3c_hsotg_plat origen_hsotg_pdata;
+
 static struct gpio_keys_button origen_gpio_keys_table[] = {
 	{
 		.code			= KEY_MENU,
@@ -655,6 +659,7 @@ static struct platform_device *origen_devices[] __initdata = {
 	&s3c_device_hsmmc0,
 	&s3c_device_i2c0,
 	&s3c_device_rtc,
+	&s3c_device_usb_hsotg,
 	&s3c_device_wdt,
 	&s5p_device_ehci,
 	&s5p_device_fimc0,
@@ -744,6 +749,7 @@ static void __init origen_machine_init(void)
 
 	origen_ehci_init();
 	origen_ohci_init();
+	s3c_hsotg_set_platdata(&origen_hsotg_pdata);
 	clk_xusbxti.rate = 24000000;
 
 	s5p_tv_setup();

arch/arm/mach-exynos/mach-smdk4x12.c

@@ -219,8 +219,10 @@ static struct platform_pwm_backlight_data smdk4x12_bl_data = {
 
 static uint32_t smdk4x12_keymap[] __initdata = {
 	/* KEY(row, col, keycode) */
-	KEY(1, 0, KEY_D), KEY(1, 1, KEY_A), KEY(1, 2, KEY_B),
-	KEY(1, 3, KEY_E), KEY(1, 4, KEY_C)
+	KEY(1, 3, KEY_1), KEY(1, 4, KEY_2), KEY(1, 5, KEY_3),
+	KEY(1, 6, KEY_4), KEY(1, 7, KEY_5),
+	KEY(2, 5, KEY_D), KEY(2, 6, KEY_A), KEY(2, 7, KEY_B),
+	KEY(0, 7, KEY_E), KEY(0, 5, KEY_C)
 };
 
 static struct matrix_keymap_data smdk4x12_keymap_data __initdata = {
@@ -230,8 +232,8 @@ static struct matrix_keymap_data smdk4x12_keymap_data __initdata = {
 
 static struct samsung_keypad_platdata smdk4x12_keypad_data __initdata = {
 	.keymap_data	= &smdk4x12_keymap_data,
-	.rows		= 2,
-	.cols		= 5,
+	.rows		= 3,
+	.cols		= 8,
 };
 
 static struct platform_device *smdk4x12_devices[] __initdata = {

arch/arm/mach-exynos/mach-smdkv310.c

@@ -19,6 +19,7 @@
 #include <linux/i2c.h>
 #include <linux/input.h>
 #include <linux/pwm_backlight.h>
+#include <linux/platform_data/s3c-hsotg.h>
 
 #include <asm/mach/arch.h>
 #include <asm/hardware/gic.h>
@@ -271,6 +272,9 @@ static void __init smdkv310_ohci_init(void)
 	exynos4_ohci_set_platdata(pdata);
 }
 
+/* USB OTG */
+static struct s3c_hsotg_plat smdkv310_hsotg_pdata;
+
 static struct platform_device *smdkv310_devices[] __initdata = {
 	&s3c_device_hsmmc0,
 	&s3c_device_hsmmc1,
@@ -279,6 +283,7 @@ static struct platform_device *smdkv310_devices[] __initdata = {
 	&s3c_device_i2c1,
 	&s5p_device_i2c_hdmiphy,
 	&s3c_device_rtc,
+	&s3c_device_usb_hsotg,
 	&s3c_device_wdt,
 	&s5p_device_ehci,
 	&s5p_device_fimc0,
@@ -390,6 +395,7 @@ static void __init smdkv310_machine_init(void)
 
 	smdkv310_ehci_init();
 	smdkv310_ohci_init();
+	s3c_hsotg_set_platdata(&smdkv310_hsotg_pdata);
 	clk_xusbxti.rate = 24000000;
 
 	platform_add_devices(smdkv310_devices, ARRAY_SIZE(smdkv310_devices));

arch/arm/mach-s3c64xx/include/mach/crag6410.h

@@ -13,9 +13,7 @@
 
 #include <linux/gpio.h>
 
-#define BANFF_PMIC_IRQ_BASE		IRQ_BOARD_START
-#define GLENFARCLAS_PMIC_IRQ_BASE	(IRQ_BOARD_START + 64)
-#define CODEC_IRQ_BASE			(IRQ_BOARD_START + 128)
+#define GLENFARCLAS_PMIC_IRQ_BASE	IRQ_BOARD_START
 
 #define PCA935X_GPIO_BASE		GPIO_BOARD_START
 #define CODEC_GPIO_BASE			(GPIO_BOARD_START + 8)

arch/arm/mach-s3c64xx/mach-crag6410-module.c

@@ -39,6 +39,7 @@ static struct spi_board_info wm1253_devs[] = {
 		.bus_num	= 0,
 		.chip_select	= 0,
 		.mode		= SPI_MODE_0,
+		.irq		= S3C_EINT(5),
 		.controller_data = &wm0010_spi_csinfo,
 	},
 };
@@ -168,7 +169,6 @@ static struct wm8994_pdata wm8994_pdata = {
 	.gpio_defaults = {
 		0x3,          /* IRQ out, active high, CMOS */
 	},
-	.irq_base = CODEC_IRQ_BASE,
 	.ldo = {
 		 { .init_data = &wm8994_ldo1, },
 		 { .init_data = &wm8994_ldo2, },
@@ -182,6 +182,11 @@ static const struct i2c_board_info wm1277_devs[] = {
 	},
 };
 
+static const struct i2c_board_info wm5102_devs[] = {
+	{ I2C_BOARD_INFO("wm5102", 0x1a),
+	  .irq = GLENFARCLAS_PMIC_IRQ_BASE + WM831X_IRQ_GPIO_2, },
+};
+
 static const struct i2c_board_info wm6230_i2c_devs[] = {
 	{ I2C_BOARD_INFO("wm9081", 0x6c),
 	  .platform_data = &wm9081_pdata, },
@@ -209,6 +214,7 @@ static __devinitdata const struct {
 	  .spi_devs = wm1253_devs, .num_spi_devs = ARRAY_SIZE(wm1253_devs) },
 	{ .id = 0x32, .name = "XXXX-EV1 Caol Illa" },
 	{ .id = 0x33, .name = "XXXX-EV1 Oban" },
+	{ .id = 0x34, .name = "WM0010-6320-CS42 Balblair" },
 	{ .id = 0x39, .name = "1254-EV1 Dallas Dhu",
 	  .i2c_devs = wm1254_devs, .num_i2c_devs = ARRAY_SIZE(wm1254_devs) },
 	{ .id = 0x3a, .name = "1259-EV1 Tobermory",
@@ -218,6 +224,8 @@ static __devinitdata const struct {
 	{ .id = 0x3c, .name = "1273-EV1 Longmorn" },
 	{ .id = 0x3d, .name = "1277-EV1 Littlemill",
 	  .i2c_devs = wm1277_devs, .num_i2c_devs = ARRAY_SIZE(wm1277_devs) },
+	{ .id = 0x3e, .name = "WM5102-6271-EV1-CS127",
+	  .i2c_devs = wm5102_devs, .num_i2c_devs = ARRAY_SIZE(wm5102_devs) },
 };
 
 static __devinit int wlf_gf_module_probe(struct i2c_client *i2c,

arch/arm/mach-s3c64xx/mach-crag6410.c

@@ -525,7 +525,6 @@ static struct wm831x_touch_pdata touch_pdata __initdata = {
 
 static struct wm831x_pdata crag_pmic_pdata __initdata = {
 	.wm831x_num = 1,
-	.irq_base = BANFF_PMIC_IRQ_BASE,
 	.gpio_base = BANFF_PMIC_GPIO_BASE,
 	.soft_shutdown = true,
 

arch/arm/mach-s5pv210/Kconfig

@@ -152,6 +152,7 @@ config MACH_SMDKV210
 	select S3C_DEV_I2C1
 	select S3C_DEV_I2C2
 	select S3C_DEV_RTC
+	select S3C_DEV_USB_HSOTG
 	select S3C_DEV_WDT
 	select S5P_DEV_FIMC0
 	select S5P_DEV_FIMC1
@@ -170,6 +171,7 @@ config MACH_SMDKV210
 	select S5PV210_SETUP_IDE
 	select S5PV210_SETUP_KEYPAD
 	select S5PV210_SETUP_SDHCI
+	select S5PV210_SETUP_USB_PHY
 	help
 	  Machine support for Samsung SMDKV210
 

arch/arm/mach-s5pv210/mach-smdkv210.c

@@ -19,6 +19,7 @@
 #include <linux/gpio.h>
 #include <linux/delay.h>
 #include <linux/pwm_backlight.h>
+#include <linux/platform_data/s3c-hsotg.h>
 
 #include <asm/hardware/vic.h>
 #include <asm/mach/arch.h>
@@ -47,6 +48,7 @@
 #include <plat/backlight.h>
 #include <plat/regs-fb-v4.h>
 #include <plat/mfc.h>
+#include <plat/clock.h>
 
 #include "common.h"
 
@@ -203,6 +205,9 @@ static struct s3c_fb_platdata smdkv210_lcd0_pdata __initdata = {
 	.setup_gpio	= s5pv210_fb_gpio_setup_24bpp,
 };
 
+/* USB OTG */
+static struct s3c_hsotg_plat smdkv210_hsotg_pdata;
+
 static struct platform_device *smdkv210_devices[] __initdata = {
 	&s3c_device_adc,
 	&s3c_device_cfcon,
@@ -216,6 +221,7 @@ static struct platform_device *smdkv210_devices[] __initdata = {
 	&s3c_device_i2c2,
 	&s3c_device_rtc,
 	&s3c_device_ts,
+	&s3c_device_usb_hsotg,
 	&s3c_device_wdt,
 	&s5p_device_fimc0,
 	&s5p_device_fimc1,
@@ -314,6 +320,9 @@ static void __init smdkv210_machine_init(void)
 
 	samsung_bl_set(&smdkv210_bl_gpio_info, &smdkv210_bl_data);
 
+	s3c_hsotg_set_platdata(&smdkv210_hsotg_pdata);
+	clk_xusbxti.rate = 24000000;
+
 	platform_add_devices(smdkv210_devices, ARRAY_SIZE(smdkv210_devices));
 }