|
@@ -27,6 +27,7 @@
|
|
|
#include <linux/module.h>
|
|
|
#include <linux/i2c.h>
|
|
|
#include <linux/interrupt.h>
|
|
|
+#include <linux/irq.h>
|
|
|
#include <linux/sched.h>
|
|
|
#include <linux/mutex.h>
|
|
|
#include <linux/delay.h>
|
|
@@ -117,15 +118,17 @@ struct tsl2563_chip {
|
|
|
struct iio_dev *indio_dev;
|
|
|
struct delayed_work poweroff_work;
|
|
|
|
|
|
+ struct work_struct work_thresh;
|
|
|
+ s64 event_timestamp;
|
|
|
/* Remember state for suspend and resume functions */
|
|
|
pm_message_t state;
|
|
|
|
|
|
struct tsl2563_gainlevel_coeff *gainlevel;
|
|
|
|
|
|
- /* Thresholds are in lux */
|
|
|
u16 low_thres;
|
|
|
u16 high_thres;
|
|
|
u8 intr;
|
|
|
+ bool int_enabled;
|
|
|
|
|
|
/* Calibration coefficients */
|
|
|
u32 calib0;
|
|
@@ -189,17 +192,29 @@ static int tsl2563_get_power(struct tsl2563_chip *chip)
|
|
|
|
|
|
static int tsl2563_configure(struct tsl2563_chip *chip)
|
|
|
{
|
|
|
- struct i2c_client *client = chip->client;
|
|
|
int ret;
|
|
|
|
|
|
- ret = tsl2563_write(client, TSL2563_REG_TIMING,
|
|
|
+ ret = tsl2563_write(chip->client, TSL2563_REG_TIMING,
|
|
|
chip->gainlevel->gaintime);
|
|
|
if (ret)
|
|
|
- goto out;
|
|
|
-
|
|
|
- ret = tsl2563_write(client, TSL2563_REG_INT, chip->intr);
|
|
|
-
|
|
|
-out:
|
|
|
+ goto error_ret;
|
|
|
+ ret = tsl2563_write(chip->client, TSL2563_REG_HIGHLOW,
|
|
|
+ chip->high_thres & 0xFF);
|
|
|
+ if (ret)
|
|
|
+ goto error_ret;
|
|
|
+ ret = tsl2563_write(chip->client, TSL2563_REG_HIGHHIGH,
|
|
|
+ (chip->high_thres >> 8) & 0xFF);
|
|
|
+ if (ret)
|
|
|
+ goto error_ret;
|
|
|
+ ret = tsl2563_write(chip->client, TSL2563_REG_LOWLOW,
|
|
|
+ chip->low_thres & 0xFF);
|
|
|
+ if (ret)
|
|
|
+ goto error_ret;
|
|
|
+ ret = tsl2563_write(chip->client, TSL2563_REG_LOWHIGH,
|
|
|
+ (chip->low_thres >> 8) & 0xFF);
|
|
|
+/* Interrupt register is automatically written anyway if it is relevant
|
|
|
+ so is not here */
|
|
|
+error_ret:
|
|
|
return ret;
|
|
|
}
|
|
|
|
|
@@ -323,21 +338,23 @@ static int tsl2563_get_adc(struct tsl2563_chip *chip)
|
|
|
if (chip->state.event != PM_EVENT_ON)
|
|
|
goto out;
|
|
|
|
|
|
- cancel_delayed_work(&chip->poweroff_work);
|
|
|
-
|
|
|
- if (!tsl2563_get_power(chip)) {
|
|
|
- ret = tsl2563_set_power(chip, 1);
|
|
|
- if (ret)
|
|
|
- goto out;
|
|
|
- ret = tsl2563_configure(chip);
|
|
|
- if (ret)
|
|
|
- goto out;
|
|
|
- tsl2563_wait_adc(chip);
|
|
|
+ if (!chip->int_enabled) {
|
|
|
+ cancel_delayed_work(&chip->poweroff_work);
|
|
|
+
|
|
|
+ if (!tsl2563_get_power(chip)) {
|
|
|
+ ret = tsl2563_set_power(chip, 1);
|
|
|
+ if (ret)
|
|
|
+ goto out;
|
|
|
+ ret = tsl2563_configure(chip);
|
|
|
+ if (ret)
|
|
|
+ goto out;
|
|
|
+ tsl2563_wait_adc(chip);
|
|
|
+ }
|
|
|
}
|
|
|
|
|
|
while (retry) {
|
|
|
ret = tsl2563_read(client,
|
|
|
- TSL2563_REG_DATA0LOW | TSL2563_CLEARINT,
|
|
|
+ TSL2563_REG_DATA0LOW,
|
|
|
buf0, sizeof(buf0));
|
|
|
if (ret != sizeof(buf0))
|
|
|
goto out;
|
|
@@ -356,7 +373,8 @@ static int tsl2563_get_adc(struct tsl2563_chip *chip)
|
|
|
chip->data0 = normalize_adc(adc0, chip->gainlevel->gaintime);
|
|
|
chip->data1 = normalize_adc(adc1, chip->gainlevel->gaintime);
|
|
|
|
|
|
- schedule_delayed_work(&chip->poweroff_work, 5 * HZ);
|
|
|
+ if (!chip->int_enabled)
|
|
|
+ schedule_delayed_work(&chip->poweroff_work, 5 * HZ);
|
|
|
|
|
|
ret = 0;
|
|
|
out:
|
|
@@ -449,11 +467,12 @@ static unsigned int adc_to_lux(u32 adc0, u32 adc1)
|
|
|
/* Sysfs interface */
|
|
|
/*--------------------------------------------------------------*/
|
|
|
|
|
|
-static ssize_t tsl2563_adc0_show(struct device *dev,
|
|
|
+static ssize_t tsl2563_adc_show(struct device *dev,
|
|
|
struct device_attribute *attr, char *buf)
|
|
|
{
|
|
|
struct iio_dev *indio_dev = dev_get_drvdata(dev);
|
|
|
struct tsl2563_chip *chip = indio_dev->dev_data;
|
|
|
+ struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
|
|
|
int ret;
|
|
|
|
|
|
mutex_lock(&chip->lock);
|
|
@@ -462,26 +481,14 @@ static ssize_t tsl2563_adc0_show(struct device *dev,
|
|
|
if (ret)
|
|
|
goto out;
|
|
|
|
|
|
- ret = snprintf(buf, PAGE_SIZE, "%d\n", chip->data0);
|
|
|
-out:
|
|
|
- mutex_unlock(&chip->lock);
|
|
|
- return ret;
|
|
|
-}
|
|
|
-
|
|
|
-static ssize_t tsl2563_adc1_show(struct device *dev,
|
|
|
- struct device_attribute *attr, char *buf)
|
|
|
-{
|
|
|
- struct iio_dev *indio_dev = dev_get_drvdata(dev);
|
|
|
- struct tsl2563_chip *chip = indio_dev->dev_data;
|
|
|
- int ret;
|
|
|
-
|
|
|
- mutex_lock(&chip->lock);
|
|
|
-
|
|
|
- ret = tsl2563_get_adc(chip);
|
|
|
- if (ret)
|
|
|
- goto out;
|
|
|
-
|
|
|
- ret = snprintf(buf, PAGE_SIZE, "%d\n", chip->data1);
|
|
|
+ switch (this_attr->address) {
|
|
|
+ case 0:
|
|
|
+ ret = snprintf(buf, PAGE_SIZE, "%d\n", chip->data0);
|
|
|
+ break;
|
|
|
+ case 1:
|
|
|
+ ret = snprintf(buf, PAGE_SIZE, "%d\n", chip->data1);
|
|
|
+ break;
|
|
|
+ }
|
|
|
out:
|
|
|
mutex_unlock(&chip->lock);
|
|
|
return ret;
|
|
@@ -527,37 +534,36 @@ static ssize_t format_calib(char *buf, int len, u32 calib)
|
|
|
return snprintf(buf, PAGE_SIZE, "%d\n", calib_to_sysfs(calib));
|
|
|
}
|
|
|
|
|
|
-static ssize_t tsl2563_calib0_show(struct device *dev,
|
|
|
- struct device_attribute *attr, char *buf)
|
|
|
-{
|
|
|
- struct iio_dev *indio_dev = dev_get_drvdata(dev);
|
|
|
- struct tsl2563_chip *chip = indio_dev->dev_data;
|
|
|
- int ret;
|
|
|
-
|
|
|
- mutex_lock(&chip->lock);
|
|
|
- ret = format_calib(buf, PAGE_SIZE, chip->calib0);
|
|
|
- mutex_unlock(&chip->lock);
|
|
|
- return ret;
|
|
|
-}
|
|
|
-
|
|
|
-static ssize_t tsl2563_calib1_show(struct device *dev,
|
|
|
- struct device_attribute *attr, char *buf)
|
|
|
+static ssize_t tsl2563_calib_show(struct device *dev,
|
|
|
+ struct device_attribute *attr, char *buf)
|
|
|
{
|
|
|
struct iio_dev *indio_dev = dev_get_drvdata(dev);
|
|
|
struct tsl2563_chip *chip = indio_dev->dev_data;
|
|
|
+ struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
|
|
|
int ret;
|
|
|
|
|
|
mutex_lock(&chip->lock);
|
|
|
- ret = format_calib(buf, PAGE_SIZE, chip->calib1);
|
|
|
+ switch (this_attr->address) {
|
|
|
+ case 0:
|
|
|
+ ret = format_calib(buf, PAGE_SIZE, chip->calib0);
|
|
|
+ break;
|
|
|
+ case 1:
|
|
|
+ ret = format_calib(buf, PAGE_SIZE, chip->calib1);
|
|
|
+ break;
|
|
|
+ default:
|
|
|
+ ret = -ENODEV;
|
|
|
+ }
|
|
|
mutex_unlock(&chip->lock);
|
|
|
return ret;
|
|
|
}
|
|
|
|
|
|
-static int do_calib_store(struct device *dev, const char *buf, size_t len,
|
|
|
- int ch)
|
|
|
+static ssize_t tsl2563_calib_store(struct device *dev,
|
|
|
+ struct device_attribute *attr,
|
|
|
+ const char *buf, size_t len)
|
|
|
{
|
|
|
struct iio_dev *indio_dev = dev_get_drvdata(dev);
|
|
|
struct tsl2563_chip *chip = indio_dev->dev_data;
|
|
|
+ struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
|
|
|
int value;
|
|
|
u32 calib;
|
|
|
|
|
@@ -566,37 +572,27 @@ static int do_calib_store(struct device *dev, const char *buf, size_t len,
|
|
|
|
|
|
calib = calib_from_sysfs(value);
|
|
|
|
|
|
- if (ch)
|
|
|
- chip->calib1 = calib;
|
|
|
- else
|
|
|
+ switch (this_attr->address) {
|
|
|
+ case 0:
|
|
|
chip->calib0 = calib;
|
|
|
+ break;
|
|
|
+ case 1:
|
|
|
+ chip->calib1 = calib;
|
|
|
+ break;
|
|
|
+ }
|
|
|
|
|
|
return len;
|
|
|
}
|
|
|
|
|
|
-static ssize_t tsl2563_calib0_store(struct device *dev,
|
|
|
- struct device_attribute *attr,
|
|
|
- const char *buf, size_t len)
|
|
|
-{
|
|
|
- return do_calib_store(dev, buf, len, 0);
|
|
|
-}
|
|
|
-
|
|
|
-static ssize_t tsl2563_calib1_store(struct device *dev,
|
|
|
- struct device_attribute *attr,
|
|
|
- const char *buf, size_t len)
|
|
|
-{
|
|
|
- return do_calib_store(dev, buf, len, 1);
|
|
|
-}
|
|
|
-
|
|
|
-/* AmitXXXX: Convert to IIO_DEV_ATTR_LIGHT* as in tsl2561
|
|
|
- * once I understand what they mean */
|
|
|
-static DEVICE_ATTR(adc0, S_IRUGO, tsl2563_adc0_show, NULL);
|
|
|
-static DEVICE_ATTR(adc1, S_IRUGO, tsl2563_adc1_show, NULL);
|
|
|
+static IIO_DEVICE_ATTR(intensity_both_raw, S_IRUGO,
|
|
|
+ tsl2563_adc_show, NULL, 0);
|
|
|
+static IIO_DEVICE_ATTR(intensity_ir_raw, S_IRUGO,
|
|
|
+ tsl2563_adc_show, NULL, 1);
|
|
|
static DEVICE_ATTR(illuminance0_input, S_IRUGO, tsl2563_lux_show, NULL);
|
|
|
-static DEVICE_ATTR(calib0, S_IRUGO | S_IWUSR,
|
|
|
- tsl2563_calib0_show, tsl2563_calib0_store);
|
|
|
-static DEVICE_ATTR(calib1, S_IRUGO | S_IWUSR,
|
|
|
- tsl2563_calib1_show, tsl2563_calib1_store);
|
|
|
+static IIO_DEVICE_ATTR(intensity_both_calibgain, S_IRUGO | S_IWUSR,
|
|
|
+ tsl2563_calib_show, tsl2563_calib_store, 0);
|
|
|
+static IIO_DEVICE_ATTR(intensity_ir_calibgain, S_IRUGO | S_IWUSR,
|
|
|
+ tsl2563_calib_show, tsl2563_calib_store, 1);
|
|
|
|
|
|
static ssize_t tsl2563_show_name(struct device *dev,
|
|
|
struct device_attribute *attr,
|
|
@@ -610,11 +606,11 @@ static ssize_t tsl2563_show_name(struct device *dev,
|
|
|
static DEVICE_ATTR(name, S_IRUGO, tsl2563_show_name, NULL);
|
|
|
|
|
|
static struct attribute *tsl2563_attributes[] = {
|
|
|
- &dev_attr_adc0.attr,
|
|
|
- &dev_attr_adc1.attr,
|
|
|
+ &iio_dev_attr_intensity_both_raw.dev_attr.attr,
|
|
|
+ &iio_dev_attr_intensity_ir_raw.dev_attr.attr,
|
|
|
&dev_attr_illuminance0_input.attr,
|
|
|
- &dev_attr_calib0.attr,
|
|
|
- &dev_attr_calib1.attr,
|
|
|
+ &iio_dev_attr_intensity_both_calibgain.dev_attr.attr,
|
|
|
+ &iio_dev_attr_intensity_ir_calibgain.dev_attr.attr,
|
|
|
&dev_attr_name.attr,
|
|
|
NULL
|
|
|
};
|
|
@@ -623,6 +619,192 @@ static const struct attribute_group tsl2563_group = {
|
|
|
.attrs = tsl2563_attributes,
|
|
|
};
|
|
|
|
|
|
+static ssize_t tsl2563_read_thresh(struct device *dev,
|
|
|
+ struct device_attribute *attr,
|
|
|
+ char *buf)
|
|
|
+{
|
|
|
+ struct iio_dev *indio_dev = dev_get_drvdata(dev);
|
|
|
+ struct tsl2563_chip *chip = indio_dev->dev_data;
|
|
|
+ struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
|
|
|
+ u16 val = 0;
|
|
|
+ switch (this_attr->address) {
|
|
|
+ case TSL2563_REG_HIGHLOW:
|
|
|
+ val = chip->high_thres;
|
|
|
+ break;
|
|
|
+ case TSL2563_REG_LOWLOW:
|
|
|
+ val = chip->low_thres;
|
|
|
+ break;
|
|
|
+ }
|
|
|
+ return snprintf(buf, PAGE_SIZE, "%d\n", val);
|
|
|
+}
|
|
|
+
|
|
|
+static ssize_t tsl2563_write_thresh(struct device *dev,
|
|
|
+ struct device_attribute *attr,
|
|
|
+ const char *buf,
|
|
|
+ size_t len)
|
|
|
+{
|
|
|
+ struct iio_dev *indio_dev = dev_get_drvdata(dev);
|
|
|
+ struct tsl2563_chip *chip = indio_dev->dev_data;
|
|
|
+ struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
|
|
|
+ unsigned long val;
|
|
|
+ int ret;
|
|
|
+
|
|
|
+ ret = strict_strtoul(buf, 10, &val);
|
|
|
+ if (ret)
|
|
|
+ return ret;
|
|
|
+ mutex_lock(&chip->lock);
|
|
|
+ ret = tsl2563_write(chip->client, this_attr->address, val & 0xFF);
|
|
|
+ if (ret)
|
|
|
+ goto error_ret;
|
|
|
+ ret = tsl2563_write(chip->client, this_attr->address + 1,
|
|
|
+ (val >> 8) & 0xFF);
|
|
|
+ switch (this_attr->address) {
|
|
|
+ case TSL2563_REG_HIGHLOW:
|
|
|
+ chip->high_thres = val;
|
|
|
+ break;
|
|
|
+ case TSL2563_REG_LOWLOW:
|
|
|
+ chip->low_thres = val;
|
|
|
+ break;
|
|
|
+ }
|
|
|
+
|
|
|
+error_ret:
|
|
|
+ mutex_unlock(&chip->lock);
|
|
|
+
|
|
|
+ return ret < 0 ? ret : len;
|
|
|
+}
|
|
|
+
|
|
|
+static IIO_DEVICE_ATTR(intensity_both_thresh_high_value,
|
|
|
+ S_IRUGO | S_IWUSR,
|
|
|
+ tsl2563_read_thresh,
|
|
|
+ tsl2563_write_thresh,
|
|
|
+ TSL2563_REG_HIGHLOW);
|
|
|
+
|
|
|
+static IIO_DEVICE_ATTR(intensity_both_thresh_low_value,
|
|
|
+ S_IRUGO | S_IWUSR,
|
|
|
+ tsl2563_read_thresh,
|
|
|
+ tsl2563_write_thresh,
|
|
|
+ TSL2563_REG_LOWLOW);
|
|
|
+
|
|
|
+static int tsl2563_int_th(struct iio_dev *dev_info,
|
|
|
+ int index,
|
|
|
+ s64 timestamp,
|
|
|
+ int not_test)
|
|
|
+{
|
|
|
+ struct tsl2563_chip *chip = dev_info->dev_data;
|
|
|
+
|
|
|
+ chip->event_timestamp = timestamp;
|
|
|
+ schedule_work(&chip->work_thresh);
|
|
|
+
|
|
|
+ return 0;
|
|
|
+}
|
|
|
+
|
|
|
+static void tsl2563_int_bh(struct work_struct *work_s)
|
|
|
+{
|
|
|
+ struct tsl2563_chip *chip
|
|
|
+ = container_of(work_s,
|
|
|
+ struct tsl2563_chip, work_thresh);
|
|
|
+ u8 cmd = TSL2563_CMD | TSL2563_CLEARINT;
|
|
|
+
|
|
|
+ iio_push_event(chip->indio_dev, 0,
|
|
|
+ IIO_EVENT_CODE_LIGHT_BASE,
|
|
|
+ chip->event_timestamp);
|
|
|
+
|
|
|
+ /* reenable_irq */
|
|
|
+ enable_irq(chip->client->irq);
|
|
|
+ /* clear the interrupt and push the event */
|
|
|
+ i2c_master_send(chip->client, &cmd, sizeof(cmd));
|
|
|
+
|
|
|
+}
|
|
|
+
|
|
|
+static ssize_t tsl2563_write_interrupt_config(struct device *dev,
|
|
|
+ struct device_attribute *attr,
|
|
|
+ const char *buf,
|
|
|
+ size_t len)
|
|
|
+{
|
|
|
+ struct iio_dev *indio_dev = dev_get_drvdata(dev);
|
|
|
+ struct tsl2563_chip *chip = indio_dev->dev_data;
|
|
|
+ struct iio_event_attr *this_attr = to_iio_event_attr(attr);
|
|
|
+ int input, ret = 0;
|
|
|
+
|
|
|
+ ret = sscanf(buf, "%d", &input);
|
|
|
+ if (ret != 1)
|
|
|
+ return -EINVAL;
|
|
|
+ mutex_lock(&chip->lock);
|
|
|
+ if (input && !(chip->intr & 0x30)) {
|
|
|
+ iio_add_event_to_list(this_attr->listel,
|
|
|
+ &indio_dev->interrupts[0]->ev_list);
|
|
|
+ chip->intr &= ~0x30;
|
|
|
+ chip->intr |= 0x10;
|
|
|
+ /* ensure the chip is actually on */
|
|
|
+ cancel_delayed_work(&chip->poweroff_work);
|
|
|
+ if (!tsl2563_get_power(chip)) {
|
|
|
+ ret = tsl2563_set_power(chip, 1);
|
|
|
+ if (ret)
|
|
|
+ goto out;
|
|
|
+ ret = tsl2563_configure(chip);
|
|
|
+ if (ret)
|
|
|
+ goto out;
|
|
|
+ }
|
|
|
+ ret = tsl2563_write(chip->client, TSL2563_REG_INT, chip->intr);
|
|
|
+ chip->int_enabled = true;
|
|
|
+ }
|
|
|
+
|
|
|
+ if (!input && (chip->intr & 0x30)) {
|
|
|
+ chip->intr |= ~0x30;
|
|
|
+ ret = tsl2563_write(chip->client, TSL2563_REG_INT, chip->intr);
|
|
|
+ iio_remove_event_from_list(this_attr->listel,
|
|
|
+ &indio_dev->interrupts[0]->ev_list);
|
|
|
+ chip->int_enabled = false;
|
|
|
+ /* now the interrupt is not enabled, we can go to sleep */
|
|
|
+ schedule_delayed_work(&chip->poweroff_work, 5 * HZ);
|
|
|
+ }
|
|
|
+out:
|
|
|
+ mutex_unlock(&chip->lock);
|
|
|
+
|
|
|
+ return (ret < 0) ? ret : len;
|
|
|
+}
|
|
|
+
|
|
|
+static ssize_t tsl2563_read_interrupt_config(struct device *dev,
|
|
|
+ struct device_attribute *attr,
|
|
|
+ char *buf)
|
|
|
+{
|
|
|
+ struct iio_dev *indio_dev = dev_get_drvdata(dev);
|
|
|
+ struct tsl2563_chip *chip = indio_dev->dev_data;
|
|
|
+ int ret;
|
|
|
+ u8 rxbuf;
|
|
|
+ ssize_t len;
|
|
|
+
|
|
|
+ mutex_lock(&chip->lock);
|
|
|
+ ret = tsl2563_read(chip->client,
|
|
|
+ TSL2563_REG_INT,
|
|
|
+ &rxbuf,
|
|
|
+ sizeof(rxbuf));
|
|
|
+ mutex_unlock(&chip->lock);
|
|
|
+ if (ret < 0)
|
|
|
+ goto error_ret;
|
|
|
+ len = snprintf(buf, PAGE_SIZE, "%d\n", !!(rxbuf & 0x30));
|
|
|
+error_ret:
|
|
|
+
|
|
|
+ return (ret < 0) ? ret : len;
|
|
|
+}
|
|
|
+
|
|
|
+IIO_EVENT_ATTR(intensity_both_thresh_both_en,
|
|
|
+ tsl2563_read_interrupt_config,
|
|
|
+ tsl2563_write_interrupt_config,
|
|
|
+ 0,
|
|
|
+ tsl2563_int_th);
|
|
|
+
|
|
|
+static struct attribute *tsl2563_event_attributes[] = {
|
|
|
+ &iio_event_attr_intensity_both_thresh_both_en.dev_attr.attr,
|
|
|
+ &iio_dev_attr_intensity_both_thresh_high_value.dev_attr.attr,
|
|
|
+ &iio_dev_attr_intensity_both_thresh_low_value.dev_attr.attr,
|
|
|
+ NULL,
|
|
|
+};
|
|
|
+
|
|
|
+static struct attribute_group tsl2563_event_attribute_group = {
|
|
|
+ .attrs = tsl2563_event_attributes,
|
|
|
+};
|
|
|
+
|
|
|
/*--------------------------------------------------------------*/
|
|
|
/* Probe, Attach, Remove */
|
|
|
/*--------------------------------------------------------------*/
|
|
@@ -641,6 +823,7 @@ static int __devinit tsl2563_probe(struct i2c_client *client,
|
|
|
if (!chip)
|
|
|
return -ENOMEM;
|
|
|
|
|
|
+ INIT_WORK(&chip->work_thresh, tsl2563_int_bh);
|
|
|
i2c_set_clientdata(client, chip);
|
|
|
chip->client = client;
|
|
|
|
|
@@ -679,18 +862,36 @@ static int __devinit tsl2563_probe(struct i2c_client *client,
|
|
|
chip->indio_dev->dev_data = (void *)(chip);
|
|
|
chip->indio_dev->driver_module = THIS_MODULE;
|
|
|
chip->indio_dev->modes = INDIO_DIRECT_MODE;
|
|
|
+ if (client->irq) {
|
|
|
+ chip->indio_dev->num_interrupt_lines = 1;
|
|
|
+ chip->indio_dev->event_attrs
|
|
|
+ = &tsl2563_event_attribute_group;
|
|
|
+ }
|
|
|
ret = iio_device_register(chip->indio_dev);
|
|
|
if (ret)
|
|
|
goto fail1;
|
|
|
|
|
|
+ if (client->irq) {
|
|
|
+ ret = iio_register_interrupt_line(client->irq,
|
|
|
+ chip->indio_dev,
|
|
|
+ 0,
|
|
|
+ IRQF_TRIGGER_RISING,
|
|
|
+ client->name);
|
|
|
+ if (ret)
|
|
|
+ goto fail2;
|
|
|
+ }
|
|
|
err = tsl2563_configure(chip);
|
|
|
if (err)
|
|
|
- goto fail2;
|
|
|
+ goto fail3;
|
|
|
|
|
|
INIT_DELAYED_WORK(&chip->poweroff_work, tsl2563_poweroff_work);
|
|
|
+ /* The interrupt cannot yet be enabled so this is fine without lock */
|
|
|
schedule_delayed_work(&chip->poweroff_work, 5 * HZ);
|
|
|
|
|
|
return 0;
|
|
|
+fail3:
|
|
|
+ if (client->irq)
|
|
|
+ iio_unregister_interrupt_line(chip->indio_dev, 0);
|
|
|
fail2:
|
|
|
iio_device_unregister(chip->indio_dev);
|
|
|
fail1:
|
|
@@ -701,7 +902,15 @@ fail1:
|
|
|
static int tsl2563_remove(struct i2c_client *client)
|
|
|
{
|
|
|
struct tsl2563_chip *chip = i2c_get_clientdata(client);
|
|
|
-
|
|
|
+ if (!chip->int_enabled)
|
|
|
+ cancel_delayed_work(&chip->poweroff_work);
|
|
|
+ /* Ensure that interrupts are disabled - then flush any bottom halves */
|
|
|
+ chip->intr |= ~0x30;
|
|
|
+ tsl2563_write(chip->client, TSL2563_REG_INT, chip->intr);
|
|
|
+ flush_scheduled_work();
|
|
|
+ tsl2563_set_power(chip, 0);
|
|
|
+ if (client->irq)
|
|
|
+ iio_unregister_interrupt_line(chip->indio_dev, 0);
|
|
|
iio_device_unregister(chip->indio_dev);
|
|
|
|
|
|
kfree(chip);
|