Pārlūkot izejas kodu

Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
  powerpc/pci: Fix MODPOST warning
  powerpc/oprofile: Add ppc750 CL as supported by oprofile
  powerpc: warning: allocated section `.data_nosave' not in segment
  powerpc/kgdb: Fix build failure caused by "kgdb.c: unused variable 'acc'"
  powerpc: Fix hypervisor TLB batching
  powerpc/mm: Fix hang accessing top of vmalloc space
  powerpc: Fix memory leak in axon_msi.c
  powerpc/pmac: Fix issues with sleep on some powerbooks
  powerpc64/ftrace: use PACA to retrieve TOC in mod_return_to_handler
  powerpc/ftrace: show real return addresses in modules
Linus Torvalds 15 gadi atpakaļ
vecāks
revīzija
37a08b13eb

+ 5 - 5
arch/powerpc/include/asm/firmware.h

@@ -37,7 +37,7 @@
 #define FW_FEATURE_VIO		ASM_CONST(0x0000000000004000)
 #define FW_FEATURE_RDMA		ASM_CONST(0x0000000000008000)
 #define FW_FEATURE_LLAN		ASM_CONST(0x0000000000010000)
-#define FW_FEATURE_BULK		ASM_CONST(0x0000000000020000)
+#define FW_FEATURE_BULK_REMOVE	ASM_CONST(0x0000000000020000)
 #define FW_FEATURE_XDABR	ASM_CONST(0x0000000000040000)
 #define FW_FEATURE_MULTITCE	ASM_CONST(0x0000000000080000)
 #define FW_FEATURE_SPLPAR	ASM_CONST(0x0000000000100000)
@@ -45,8 +45,7 @@
 #define FW_FEATURE_LPAR		ASM_CONST(0x0000000000400000)
 #define FW_FEATURE_PS3_LV1	ASM_CONST(0x0000000000800000)
 #define FW_FEATURE_BEAT		ASM_CONST(0x0000000001000000)
-#define FW_FEATURE_BULK_REMOVE	ASM_CONST(0x0000000002000000)
-#define FW_FEATURE_CMO		ASM_CONST(0x0000000004000000)
+#define FW_FEATURE_CMO		ASM_CONST(0x0000000002000000)
 
 #ifndef __ASSEMBLY__
 
@@ -58,8 +57,9 @@ enum {
 		FW_FEATURE_PERF | FW_FEATURE_DUMP | FW_FEATURE_INTERRUPT |
 		FW_FEATURE_MIGRATE | FW_FEATURE_PERFMON | FW_FEATURE_CRQ |
 		FW_FEATURE_VIO | FW_FEATURE_RDMA | FW_FEATURE_LLAN |
-		FW_FEATURE_BULK | FW_FEATURE_XDABR | FW_FEATURE_MULTITCE |
-		FW_FEATURE_SPLPAR | FW_FEATURE_LPAR | FW_FEATURE_CMO,
+		FW_FEATURE_BULK_REMOVE | FW_FEATURE_XDABR |
+		FW_FEATURE_MULTITCE | FW_FEATURE_SPLPAR | FW_FEATURE_LPAR |
+		FW_FEATURE_CMO,
 	FW_FEATURE_PSERIES_ALWAYS = 0,
 	FW_FEATURE_ISERIES_POSSIBLE = FW_FEATURE_ISERIES | FW_FEATURE_LPAR,
 	FW_FEATURE_ISERIES_ALWAYS = FW_FEATURE_ISERIES | FW_FEATURE_LPAR,

+ 2 - 0
arch/powerpc/kernel/cputable.c

@@ -711,6 +711,8 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.cpu_setup		= __setup_cpu_750,
 		.machine_check		= machine_check_generic,
 		.platform		= "ppc750",
+		.oprofile_cpu_type      = "ppc/750",
+		.oprofile_type		= PPC_OPROFILE_G4,
 	},
 	{	/* 745/755 */
 		.pvr_mask		= 0xfffff000,

+ 1 - 2
arch/powerpc/kernel/entry_64.S

@@ -1038,8 +1038,7 @@ _GLOBAL(mod_return_to_handler)
 	 * We are in a module using the module's TOC.
 	 * Switch to our TOC to run inside the core kernel.
 	 */
-	LOAD_REG_IMMEDIATE(r4,ftrace_return_to_handler)
-	ld	r2, 8(r4)
+	ld	r2, PACATOC(r13)
 
 	bl	.ftrace_return_to_handler
 	nop

+ 0 - 6
arch/powerpc/kernel/kgdb.c

@@ -282,12 +282,6 @@ void gdb_regs_to_pt_regs(unsigned long *gdb_regs, struct pt_regs *regs)
 {
 	unsigned long *ptr = gdb_regs;
 	int reg;
-#ifdef CONFIG_SPE
-	union {
-		u32 v32[2];
-		u64 v64;
-	} acc;
-#endif
 
 	for (reg = 0; reg < 32; reg++)
 		UNPACK64(regs->gpr[reg], ptr);

+ 1 - 1
arch/powerpc/kernel/pci-common.c

@@ -1190,7 +1190,7 @@ EXPORT_SYMBOL(pcibios_align_resource);
  * Reparent resource children of pr that conflict with res
  * under res, and make res replace those children.
  */
-static int __init reparent_resources(struct resource *parent,
+static int reparent_resources(struct resource *parent,
 				     struct resource *res)
 {
 	struct resource *p, **pp;

+ 7 - 3
arch/powerpc/kernel/process.c

@@ -1016,9 +1016,13 @@ void show_stack(struct task_struct *tsk, unsigned long *stack)
 #ifdef CONFIG_FUNCTION_GRAPH_TRACER
 	int curr_frame = current->curr_ret_stack;
 	extern void return_to_handler(void);
-	unsigned long addr = (unsigned long)return_to_handler;
+	unsigned long rth = (unsigned long)return_to_handler;
+	unsigned long mrth = -1;
 #ifdef CONFIG_PPC64
-	addr = *(unsigned long*)addr;
+	extern void mod_return_to_handler(void);
+	rth = *(unsigned long *)rth;
+	mrth = (unsigned long)mod_return_to_handler;
+	mrth = *(unsigned long *)mrth;
 #endif
 #endif
 
@@ -1044,7 +1048,7 @@ void show_stack(struct task_struct *tsk, unsigned long *stack)
 		if (!firstframe || ip != lr) {
 			printk("["REG"] ["REG"] %pS", sp, ip, (void *)ip);
 #ifdef CONFIG_FUNCTION_GRAPH_TRACER
-			if (ip == addr && curr_frame >= 0) {
+			if ((ip == rth || ip == mrth) && curr_frame >= 0) {
 				printk(" (%pS)",
 				       (void *)current->ret_stack[curr_frame].ret);
 				curr_frame--;

+ 1 - 0
arch/powerpc/kernel/vmlinux.lds.S

@@ -236,6 +236,7 @@ SECTIONS
 		READ_MOSTLY_DATA(L1_CACHE_BYTES)
 	}
 
+	. = ALIGN(PAGE_SIZE);
 	.data_nosave : AT(ADDR(.data_nosave) - LOAD_OFFSET) {
 		NOSAVE_DATA
 	}

+ 4 - 6
arch/powerpc/mm/slb_low.S

@@ -72,19 +72,17 @@ _GLOBAL(slb_miss_kernel_load_vmemmap)
 1:
 #endif /* CONFIG_SPARSEMEM_VMEMMAP */
 
-	/* vmalloc/ioremap mapping encoding bits, the "li" instructions below
-	 * will be patched by the kernel at boot
+	/* vmalloc mapping gets the encoding from the PACA as the mapping
+	 * can be demoted from 64K -> 4K dynamically on some machines
 	 */
-BEGIN_FTR_SECTION
-	/* check whether this is in vmalloc or ioremap space */
 	clrldi	r11,r10,48
 	cmpldi	r11,(VMALLOC_SIZE >> 28) - 1
 	bgt	5f
 	lhz	r11,PACAVMALLOCSLLP(r13)
 	b	6f
 5:
-END_FTR_SECTION_IFCLR(CPU_FTR_CI_LARGE_PAGE)
-_GLOBAL(slb_miss_kernel_load_io)
+	/* IO mapping */
+	_GLOBAL(slb_miss_kernel_load_io)
 	li	r11,0
 6:
 BEGIN_FTR_SECTION

+ 1 - 1
arch/powerpc/platforms/cell/axon_msi.c

@@ -365,7 +365,7 @@ static int axon_msi_probe(struct of_device *device,
 		printk(KERN_ERR
 		       "axon_msi: couldn't parse dcr properties on %s\n",
 			dn->full_name);
-		goto out;
+		goto out_free_msic;
 	}
 
 	msic->dcr_host = dcr_map(dn, dcr_base, dcr_len);

+ 5 - 2
arch/powerpc/platforms/powermac/low_i2c.c

@@ -540,8 +540,11 @@ static struct pmac_i2c_host_kw *__init kw_i2c_host_init(struct device_node *np)
 	/* Make sure IRQ is disabled */
 	kw_write_reg(reg_ier, 0);
 
-	/* Request chip interrupt */
-	if (request_irq(host->irq, kw_i2c_irq, 0, "keywest i2c", host))
+	/* Request chip interrupt. We set IRQF_TIMER because we don't
+	 * want that interrupt disabled between the 2 passes of driver
+	 * suspend or we'll have issues running the pfuncs
+	 */
+	if (request_irq(host->irq, kw_i2c_irq, IRQF_TIMER, "keywest i2c", host))
 		host->irq = NO_IRQ;
 
 	printk(KERN_INFO "KeyWest i2c @0x%08x irq %d %s\n",

+ 1 - 2
arch/powerpc/platforms/pseries/firmware.c

@@ -51,11 +51,10 @@ firmware_features_table[FIRMWARE_MAX_FEATURES] = {
 	{FW_FEATURE_VIO,		"hcall-vio"},
 	{FW_FEATURE_RDMA,		"hcall-rdma"},
 	{FW_FEATURE_LLAN,		"hcall-lLAN"},
-	{FW_FEATURE_BULK,		"hcall-bulk"},
+	{FW_FEATURE_BULK_REMOVE,	"hcall-bulk"},
 	{FW_FEATURE_XDABR,		"hcall-xdabr"},
 	{FW_FEATURE_MULTITCE,		"hcall-multi-tce"},
 	{FW_FEATURE_SPLPAR,		"hcall-splpar"},
-	{FW_FEATURE_BULK_REMOVE,	"hcall-bulk"},
 };
 
 /* Build up the firmware features bitmask using the contents of

+ 23 - 17
drivers/macintosh/via-pmu.c

@@ -405,7 +405,11 @@ static int __init via_pmu_start(void)
 		printk(KERN_ERR "via-pmu: can't map interrupt\n");
 		return -ENODEV;
 	}
-	if (request_irq(irq, via_pmu_interrupt, 0, "VIA-PMU", (void *)0)) {
+	/* We set IRQF_TIMER because we don't want the interrupt to be disabled
+	 * between the 2 passes of driver suspend, we control our own disabling
+	 * for that one
+	 */
+	if (request_irq(irq, via_pmu_interrupt, IRQF_TIMER, "VIA-PMU", (void *)0)) {
 		printk(KERN_ERR "via-pmu: can't request irq %d\n", irq);
 		return -ENODEV;
 	}
@@ -419,7 +423,7 @@ static int __init via_pmu_start(void)
 			gpio_irq = irq_of_parse_and_map(gpio_node, 0);
 
 		if (gpio_irq != NO_IRQ) {
-			if (request_irq(gpio_irq, gpio1_interrupt, 0,
+			if (request_irq(gpio_irq, gpio1_interrupt, IRQF_TIMER,
 					"GPIO1 ADB", (void *)0))
 				printk(KERN_ERR "pmu: can't get irq %d"
 				       " (GPIO1)\n", gpio_irq);
@@ -925,8 +929,7 @@ proc_write_options(struct file *file, const char __user *buffer,
 
 #ifdef CONFIG_ADB
 /* Send an ADB command */
-static int
-pmu_send_request(struct adb_request *req, int sync)
+static int pmu_send_request(struct adb_request *req, int sync)
 {
 	int i, ret;
 
@@ -1005,16 +1008,11 @@ pmu_send_request(struct adb_request *req, int sync)
 }
 
 /* Enable/disable autopolling */
-static int
-pmu_adb_autopoll(int devs)
+static int __pmu_adb_autopoll(int devs)
 {
 	struct adb_request req;
 
-	if ((vias == NULL) || (!pmu_fully_inited) || !pmu_has_adb)
-		return -ENXIO;
-
 	if (devs) {
-		adb_dev_map = devs;
 		pmu_request(&req, NULL, 5, PMU_ADB_CMD, 0, 0x86,
 			    adb_dev_map >> 8, adb_dev_map);
 		pmu_adb_flags = 2;
@@ -1027,9 +1025,17 @@ pmu_adb_autopoll(int devs)
 	return 0;
 }
 
+static int pmu_adb_autopoll(int devs)
+{
+	if ((vias == NULL) || (!pmu_fully_inited) || !pmu_has_adb)
+		return -ENXIO;
+
+	adb_dev_map = devs;
+	return __pmu_adb_autopoll(devs);
+}
+
 /* Reset the ADB bus */
-static int
-pmu_adb_reset_bus(void)
+static int pmu_adb_reset_bus(void)
 {
 	struct adb_request req;
 	int save_autopoll = adb_dev_map;
@@ -1038,13 +1044,13 @@ pmu_adb_reset_bus(void)
 		return -ENXIO;
 
 	/* anyone got a better idea?? */
-	pmu_adb_autopoll(0);
+	__pmu_adb_autopoll(0);
 
-	req.nbytes = 5;
+	req.nbytes = 4;
 	req.done = NULL;
 	req.data[0] = PMU_ADB_CMD;
-	req.data[1] = 0;
-	req.data[2] = ADB_BUSRESET;
+	req.data[1] = ADB_BUSRESET;
+	req.data[2] = 0;
 	req.data[3] = 0;
 	req.data[4] = 0;
 	req.reply_len = 0;
@@ -1056,7 +1062,7 @@ pmu_adb_reset_bus(void)
 	pmu_wait_complete(&req);
 
 	if (save_autopoll != 0)
-		pmu_adb_autopoll(save_autopoll);
+		__pmu_adb_autopoll(save_autopoll);
 
 	return 0;
 }