pcmcia: simplify IntType

IntType was only set to INT_MEMORY (driver pcmciamtd) or INT_MEMORY_AND_IO
(all other drivers). As this flags seems to relate to ioport access, make
it conditional to the driver having requested IO port access. There are two
drivers which do not request IO ports, but did set INT_MEMORY_AND_IO:
ray_cs and b43. For those, we consistently only set INT_MEMORY in future.

CC: netdev@vger.kernel.org
CC: linux-wireless@vger.kernel.org
CC: linux-ide@vger.kernel.org
CC: linux-usb@vger.kernel.org
CC: laforge@gnumonks.org
CC: linux-mtd@lists.infradead.org
CC: alsa-devel@alsa-project.org
CC: linux-serial@vger.kernel.org
CC: Jiri Kosina <jkosina@suse.cz>
CC: linux-scsi@vger.kernel.org
Acked-by: Gustavo F. Padovan <padovan@profusion.mobi> (for drivers/bluetooth)
Tested-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>

drivers/ata/pata_pcmcia.c

@@ -250,7 +250,6 @@ static int pcmcia_init_one(struct pcmcia_device *pdev)
 	pdev->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
 	pdev->resource[1]->flags |= IO_DATA_PATH_WIDTH_8;
 	pdev->conf.Attributes = CONF_ENABLE_IRQ;
-	pdev->conf.IntType = INT_MEMORY_AND_IO;
 
 	/* See if we have a manufacturer identifier. Use it to set is_kme for
 	   vendor quirks */

drivers/bluetooth/bluecard_cs.c

@@ -866,7 +866,6 @@ static int bluecard_probe(struct pcmcia_device *link)
 	link->priv = info;
 
 	link->conf.Attributes = CONF_ENABLE_IRQ;
-	link->conf.IntType = INT_MEMORY_AND_IO;
 
 	return bluecard_config(link);
 }

drivers/bluetooth/bt3c_cs.c

@@ -661,7 +661,6 @@ static int bt3c_probe(struct pcmcia_device *link)
 	link->resource[0]->end = 8;
 
 	link->conf.Attributes = CONF_ENABLE_IRQ;
-	link->conf.IntType = INT_MEMORY_AND_IO;
 
 	return bt3c_config(link);
 }

drivers/bluetooth/btuart_cs.c

@@ -590,7 +590,6 @@ static int btuart_probe(struct pcmcia_device *link)
 	link->resource[0]->end = 8;
 
 	link->conf.Attributes = CONF_ENABLE_IRQ;
-	link->conf.IntType = INT_MEMORY_AND_IO;
 
 	return btuart_config(link);
 }

drivers/bluetooth/dtl1_cs.c

@@ -576,7 +576,6 @@ static int dtl1_probe(struct pcmcia_device *link)
 	link->resource[0]->end = 8;
 
 	link->conf.Attributes = CONF_ENABLE_IRQ;
-	link->conf.IntType = INT_MEMORY_AND_IO;
 
 	return dtl1_config(link);
 }

drivers/char/pcmcia/cm4000_cs.c

@@ -1767,8 +1767,6 @@ static int cm4000_config(struct pcmcia_device * link, int devno)
 	if (pcmcia_loop_config(link, cm4000_config_check, NULL))
 		goto cs_release;
 
-	link->conf.IntType = 00000002;
-
 	if (pcmcia_request_configuration(link, &link->conf))
 		goto cs_release;
 
@@ -1829,7 +1827,6 @@ static int cm4000_probe(struct pcmcia_device *link)
 
 	dev->p_dev = link;
 	link->priv = dev;
-	link->conf.IntType = INT_MEMORY_AND_IO;
 	dev_table[i] = link;
 
 	init_waitqueue_head(&dev->devq);

drivers/char/pcmcia/cm4040_cs.c

@@ -547,8 +547,6 @@ static int reader_config(struct pcmcia_device *link, int devno)
 	if (pcmcia_loop_config(link, cm4040_config_check, NULL))
 		goto cs_release;
 
-	link->conf.IntType = 00000002;
-
 	fail_rc = pcmcia_request_configuration(link, &link->conf);
 	if (fail_rc != 0) {
 		dev_printk(KERN_INFO, &link->dev,
@@ -599,7 +597,6 @@ static int reader_probe(struct pcmcia_device *link)
 	link->priv = dev;
 	dev->p_dev = link;
 
-	link->conf.IntType = INT_MEMORY_AND_IO;
 	dev_table[i] = link;
 
 	init_waitqueue_head(&dev->devq);

drivers/char/pcmcia/ipwireless/main.c

@@ -173,7 +173,6 @@ static int config_ipwireless(struct ipw_dev *ipw)
 		return ret;
 
 	link->conf.Attributes = CONF_ENABLE_IRQ;
-	link->conf.IntType = INT_MEMORY_AND_IO;
 
 	INIT_WORK(&ipw->work_reboot, signalled_reboot_work);
 

drivers/char/pcmcia/synclink_cs.c

@@ -551,7 +551,6 @@ static int mgslpc_probe(struct pcmcia_device *link)
     /* Initialize the struct pcmcia_device structure */
 
     link->conf.Attributes = 0;
-    link->conf.IntType = INT_MEMORY_AND_IO;
 
     ret = mgslpc_config(link);
     if (ret)
@@ -595,7 +594,6 @@ static int mgslpc_config(struct pcmcia_device *link)
 	    goto failed;
 
     link->conf.Attributes = CONF_ENABLE_IRQ;
-    link->conf.IntType = INT_MEMORY_AND_IO;
     link->conf.ConfigIndex = 8;
     link->conf.Present = PRESENT_OPTION;
 

drivers/ide/ide-cs.c

@@ -100,7 +100,6 @@ static int ide_probe(struct pcmcia_device *link)
     link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
     link->resource[1]->flags |= IO_DATA_PATH_WIDTH_8;
     link->conf.Attributes = CONF_ENABLE_IRQ;
-    link->conf.IntType = INT_MEMORY_AND_IO;
 
     return ide_config(link);
 } /* ide_attach */

drivers/isdn/hardware/avm/avm_cs.c

@@ -80,7 +80,6 @@ static int avmcs_probe(struct pcmcia_device *p_dev)
 
     /* General socket configuration */
     p_dev->conf.Attributes = CONF_ENABLE_IRQ;
-    p_dev->conf.IntType = INT_MEMORY_AND_IO;
     p_dev->conf.ConfigIndex = 1;
     p_dev->conf.Present = PRESENT_OPTION;
 

drivers/isdn/hisax/avma1_cs.c

@@ -85,7 +85,6 @@ static int __devinit avma1cs_probe(struct pcmcia_device *p_dev)
 
     /* General socket configuration */
     p_dev->conf.Attributes = CONF_ENABLE_IRQ;
-    p_dev->conf.IntType = INT_MEMORY_AND_IO;
     p_dev->conf.ConfigIndex = 1;
     p_dev->conf.Present = PRESENT_OPTION;
 

drivers/isdn/hisax/elsa_cs.c

@@ -130,7 +130,6 @@ static int __devinit elsa_cs_probe(struct pcmcia_device *link)
     link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
 
     link->conf.Attributes = CONF_ENABLE_IRQ;
-    link->conf.IntType = INT_MEMORY_AND_IO;
 
     return elsa_cs_config(link);
 } /* elsa_cs_attach */

drivers/isdn/hisax/sedlbauer_cs.c

@@ -133,7 +133,6 @@ static int __devinit sedlbauer_probe(struct pcmcia_device *link)
     link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
 
     link->conf.Attributes = 0;
-    link->conf.IntType = INT_MEMORY_AND_IO;
 
     return sedlbauer_config(link);
 } /* sedlbauer_attach */

drivers/isdn/hisax/teles_cs.c

@@ -110,7 +110,6 @@ static int __devinit teles_probe(struct pcmcia_device *link)
     link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
 
     link->conf.Attributes = CONF_ENABLE_IRQ;
-    link->conf.IntType = INT_MEMORY_AND_IO;
 
     return teles_cs_config(link);
 } /* teles_attach */

drivers/mtd/maps/pcmciamtd.c

@@ -575,7 +575,6 @@ static int pcmciamtd_config(struct pcmcia_device *link)
 		link->vpp = 0;
 	}
 
-	link->conf.IntType = INT_MEMORY;
 	link->conf.ConfigIndex = 0;
 	DEBUG(2, "Setting Configuration");
 	ret = pcmcia_request_configuration(link, &link->conf);
@@ -720,7 +719,6 @@ static int pcmciamtd_probe(struct pcmcia_device *link)
 	link->priv = dev;
 
 	link->conf.Attributes = 0;
-	link->conf.IntType = INT_MEMORY;
 
 	return pcmciamtd_config(link);
 }

drivers/net/pcmcia/3c574_cs.c

@@ -281,7 +281,6 @@ static int tc574_probe(struct pcmcia_device *link)
 	link->resource[0]->end = 32;
 	link->resource[0]->flags |= IO_DATA_PATH_WIDTH_16;
 	link->conf.Attributes = CONF_ENABLE_IRQ;
-	link->conf.IntType = INT_MEMORY_AND_IO;
 	link->conf.ConfigIndex = 1;
 
 	dev->netdev_ops = &el3_netdev_ops;

drivers/net/pcmcia/3c589_cs.c

@@ -217,7 +217,6 @@ static int tc589_probe(struct pcmcia_device *link)
     link->resource[0]->flags |= IO_DATA_PATH_WIDTH_16;
 
     link->conf.Attributes = CONF_ENABLE_IRQ;
-    link->conf.IntType = INT_MEMORY_AND_IO;
     link->conf.ConfigIndex = 1;
 
     dev->netdev_ops = &el3_netdev_ops;

drivers/net/pcmcia/axnet_cs.c

@@ -167,7 +167,6 @@ static int axnet_probe(struct pcmcia_device *link)
     info->p_dev = link;
     link->priv = dev;
     link->conf.Attributes = CONF_ENABLE_IRQ;
-    link->conf.IntType = INT_MEMORY_AND_IO;
 
     dev->netdev_ops = &axnet_netdev_ops;
 

drivers/net/pcmcia/com20020_cs.c

@@ -161,7 +161,6 @@ static int com20020_probe(struct pcmcia_device *p_dev)
     p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
     p_dev->resource[0]->end = 16;
     p_dev->conf.Attributes = CONF_ENABLE_IRQ;
-    p_dev->conf.IntType = INT_MEMORY_AND_IO;
 
     info->dev = dev;
     p_dev->priv = info;

drivers/net/pcmcia/fmvj18x_cs.c

@@ -253,7 +253,6 @@ static int fmvj18x_probe(struct pcmcia_device *link)
 
     /* General socket configuration */
     link->conf.Attributes = CONF_ENABLE_IRQ;
-    link->conf.IntType = INT_MEMORY_AND_IO;
 
     dev->netdev_ops = &fjn_netdev_ops;
     dev->watchdog_timeo = TX_TIMEOUT;

drivers/net/pcmcia/ibmtr_cs.c

@@ -153,7 +153,6 @@ static int __devinit ibmtr_attach(struct pcmcia_device *link)
     link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
     link->resource[0]->end = 4;
     link->conf.Attributes = CONF_ENABLE_IRQ;
-    link->conf.IntType = INT_MEMORY_AND_IO;
     link->conf.Present = PRESENT_OPTION;
 
     info->dev = dev;

drivers/net/pcmcia/nmclan_cs.c

@@ -461,7 +461,6 @@ static int nmclan_probe(struct pcmcia_device *link)
     link->resource[0]->end = 32;
     link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
     link->conf.Attributes = CONF_ENABLE_IRQ;
-    link->conf.IntType = INT_MEMORY_AND_IO;
     link->conf.ConfigIndex = 1;
     link->conf.Present = PRESENT_OPTION;
 

drivers/net/pcmcia/pcnet_cs.c

@@ -261,7 +261,6 @@ static int pcnet_probe(struct pcmcia_device *link)
     link->priv = dev;
 
     link->conf.Attributes = CONF_ENABLE_IRQ;
-    link->conf.IntType = INT_MEMORY_AND_IO;
 
     dev->netdev_ops = &pcnet_netdev_ops;
 

drivers/net/pcmcia/smc91c92_cs.c

@@ -327,7 +327,6 @@ static int smc91c92_probe(struct pcmcia_device *link)
     link->resource[0]->end = 16;
     link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
     link->conf.Attributes = CONF_ENABLE_IRQ;
-    link->conf.IntType = INT_MEMORY_AND_IO;
 
     /* The SMC91c92-specific entries in the device structure. */
     dev->netdev_ops = &smc_netdev_ops;

drivers/net/pcmcia/xirc2ps_cs.c

@@ -530,7 +530,6 @@ xirc2ps_probe(struct pcmcia_device *link)
 
     /* General socket configuration */
     link->conf.Attributes = CONF_ENABLE_IRQ;
-    link->conf.IntType = INT_MEMORY_AND_IO;
     link->conf.ConfigIndex = 1;
 
     /* Fill in card specific entries */

drivers/net/wireless/airo_cs.c

@@ -104,7 +104,6 @@ static int airo_probe(struct pcmcia_device *p_dev)
 	  device, and can be hard-wired here.
 	*/
 	p_dev->conf.Attributes = 0;
-	p_dev->conf.IntType = INT_MEMORY_AND_IO;
 
 	/* Allocate space for private device-specific data */
 	local = kzalloc(sizeof(local_info_t), GFP_KERNEL);

drivers/net/wireless/atmel_cs.c

@@ -114,7 +114,6 @@ static int atmel_probe(struct pcmcia_device *p_dev)
 	  device, and can be hard-wired here.
 	*/
 	p_dev->conf.Attributes = 0;
-	p_dev->conf.IntType = INT_MEMORY_AND_IO;
 
 	/* Allocate space for private device-specific data */
 	local = kzalloc(sizeof(local_info_t), GFP_KERNEL);

drivers/net/wireless/b43/pcmcia.c

@@ -73,7 +73,6 @@ static int __devinit b43_pcmcia_probe(struct pcmcia_device *dev)
 	err = -ENODEV;
 
 	dev->conf.Attributes = CONF_ENABLE_IRQ;
-	dev->conf.IntType = INT_MEMORY_AND_IO;
 
 	dev->resource[2]->flags |=  WIN_ENABLE | WIN_DATA_WIDTH_16 |
 			 WIN_USE_WAIT;

drivers/net/wireless/hostap/hostap_cs.c

@@ -437,7 +437,6 @@ static int hostap_cs_probe(struct pcmcia_device *p_dev)
 	int ret;
 
 	PDEBUG(DEBUG_HW, "%s: setting Vcc=33 (constant)\n", dev_info);
-	p_dev->conf.IntType = INT_MEMORY_AND_IO;
 
 	ret = prism2_config(p_dev);
 	if (ret) {

drivers/net/wireless/libertas/if_cs.c

@@ -836,7 +836,6 @@ static int if_cs_probe(struct pcmcia_device *p_dev)
 	p_dev->priv = card;
 
 	p_dev->conf.Attributes = 0;
-	p_dev->conf.IntType = INT_MEMORY_AND_IO;
 
 	if (pcmcia_loop_config(p_dev, if_cs_ioprobe, NULL)) {
 		lbs_pr_err("error in pcmcia_loop_config\n");

drivers/net/wireless/orinoco/orinoco_cs.c

@@ -123,7 +123,6 @@ orinoco_cs_probe(struct pcmcia_device *link)
 	 * number, sizes, and attributes of IO windows) are fixed by
 	 * the nature of the device, and can be hard-wired here. */
 	link->conf.Attributes = 0;
-	link->conf.IntType = INT_MEMORY_AND_IO;
 
 	return orinoco_cs_config(link);
 }				/* orinoco_cs_attach */

drivers/net/wireless/orinoco/spectrum_cs.c

@@ -185,7 +185,6 @@ spectrum_cs_probe(struct pcmcia_device *link)
 	 * number, sizes, and attributes of IO windows) are fixed by
 	 * the nature of the device, and can be hard-wired here. */
 	link->conf.Attributes = 0;
-	link->conf.IntType = INT_MEMORY_AND_IO;
 
 	return spectrum_cs_config(link);
 }				/* spectrum_cs_attach */

drivers/net/wireless/ray_cs.c

@@ -319,7 +319,6 @@ static int ray_probe(struct pcmcia_device *p_dev)
 
 	/* General socket configuration */
 	p_dev->conf.Attributes = CONF_ENABLE_IRQ;
-	p_dev->conf.IntType = INT_MEMORY_AND_IO;
 	p_dev->conf.ConfigIndex = 1;
 
 	p_dev->priv = dev;

drivers/net/wireless/wl3501_cs.c

@@ -1889,7 +1889,6 @@ static int wl3501_probe(struct pcmcia_device *p_dev)
 
 	/* General socket configuration */
 	p_dev->conf.Attributes	= CONF_ENABLE_IRQ;
-	p_dev->conf.IntType	= INT_MEMORY_AND_IO;
 	p_dev->conf.ConfigIndex	= 1;
 
 	dev = alloc_etherdev(sizeof(struct wl3501_card));

drivers/parport/parport_cs.c

@@ -104,7 +104,6 @@ static int parport_probe(struct pcmcia_device *link)
     link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
     link->resource[1]->flags |= IO_DATA_PATH_WIDTH_8;
     link->conf.Attributes = CONF_ENABLE_IRQ;
-    link->conf.IntType = INT_MEMORY_AND_IO;
 
     return parport_config(link);
 } /* parport_attach */

drivers/pcmcia/cs_internal.h

@@ -34,7 +34,6 @@ typedef struct config_t {
 	struct kref	ref;
 	unsigned int	state;
 	unsigned int	Attributes;
-	unsigned int	IntType;
 	unsigned int	ConfigBase;
 	unsigned char	Option;
 	unsigned int	CardValues;

drivers/pcmcia/pcmcia_resource.c

@@ -447,11 +447,6 @@ int pcmcia_request_configuration(struct pcmcia_device *p_dev,
 	if (!(s->state & SOCKET_PRESENT))
 		return -ENODEV;
 
-	if (req->IntType & INT_CARDBUS) {
-		dev_dbg(&p_dev->dev, "IntType may not be INT_CARDBUS\n");
-		return -EINVAL;
-	}
-
 	mutex_lock(&s->ops_mutex);
 	c = p_dev->function_config;
 	if (c->state & CONFIG_LOCKED) {
@@ -470,12 +465,9 @@ int pcmcia_request_configuration(struct pcmcia_device *p_dev,
 	}
 
 	/* Pick memory or I/O card, DMA mode, interrupt */
-	c->IntType = req->IntType;
 	c->Attributes = req->Attributes;
-	if (req->IntType & INT_MEMORY_AND_IO)
+	if (p_dev->_io)
 		s->socket.flags |= SS_IOCARD;
-	if (req->IntType & INT_ZOOMED_VIDEO)
-		s->socket.flags |= SS_ZVCARD | SS_IOCARD;
 	if (req->Attributes & CONF_ENABLE_DMA)
 		s->socket.flags |= SS_DMA_MODE;
 	if (req->Attributes & CONF_ENABLE_SPKR) {

drivers/scsi/pcmcia/aha152x_stub.c

@@ -103,7 +103,6 @@ static int aha152x_probe(struct pcmcia_device *link)
     link->resource[0]->end = 0x20;
     link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
     link->conf.Attributes = CONF_ENABLE_IRQ;
-    link->conf.IntType = INT_MEMORY_AND_IO;
     link->conf.Present = PRESENT_OPTION;
 
     return aha152x_config_cs(link);

drivers/scsi/pcmcia/fdomain_stub.c

@@ -86,7 +86,6 @@ static int fdomain_probe(struct pcmcia_device *link)
 	link->resource[0]->end = 0x10;
 	link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
 	link->conf.Attributes = CONF_ENABLE_IRQ;
-	link->conf.IntType = INT_MEMORY_AND_IO;
 	link->conf.Present = PRESENT_OPTION;
 
 	return fdomain_config(link);

drivers/scsi/pcmcia/nsp_cs.c

@@ -1563,7 +1563,6 @@ static int nsp_cs_probe(struct pcmcia_device *link)
 
 	/* General socket configuration */
 	link->conf.Attributes	 = CONF_ENABLE_IRQ;
-	link->conf.IntType	 = INT_MEMORY_AND_IO;
 
 	ret = nsp_cs_config(link);
 

drivers/scsi/pcmcia/qlogic_stub.c

@@ -159,7 +159,6 @@ static int qlogic_probe(struct pcmcia_device *link)
 	link->resource[0]->end = 16;
 	link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
 	link->conf.Attributes = CONF_ENABLE_IRQ;
-	link->conf.IntType = INT_MEMORY_AND_IO;
 	link->conf.Present = PRESENT_OPTION;
 
 	return qlogic_config(link);

drivers/scsi/pcmcia/sym53c500_cs.c

@@ -862,7 +862,6 @@ SYM53C500_probe(struct pcmcia_device *link)
 	link->resource[0]->end = 16;
 	link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
 	link->conf.Attributes = CONF_ENABLE_IRQ;
-	link->conf.IntType = INT_MEMORY_AND_IO;
 
 	return SYM53C500_config(link);
 } /* SYM53C500_attach */

drivers/serial/serial_cs.c

@@ -337,8 +337,6 @@ static int serial_probe(struct pcmcia_device *link)
 	if (do_sound)
 		link->conf.Attributes |= CONF_ENABLE_SPKR;
 
-	link->conf.IntType = INT_MEMORY_AND_IO;
-
 	return serial_config(link);
 }
 

drivers/staging/comedi/drivers/cb_das16_cs.c

@@ -694,7 +694,6 @@ static int das16cs_pcmcia_attach(struct pcmcia_device *link)
 
 	/* Initialize the pcmcia_device structure */
 	link->conf.Attributes = 0;
-	link->conf.IntType = INT_MEMORY_AND_IO;
 
 	cur_dev = link;
 

drivers/staging/comedi/drivers/das08_cs.c

@@ -170,7 +170,6 @@ static int das08_pcmcia_attach(struct pcmcia_device *link)
 	   device, and can be hard-wired here.
 	 */
 	link->conf.Attributes = 0;
-	link->conf.IntType = INT_MEMORY_AND_IO;
 
 	cur_dev = link;
 

drivers/staging/comedi/drivers/ni_daq_700.c

@@ -499,7 +499,6 @@ static int dio700_cs_attach(struct pcmcia_device *link)
 	   device, and can be hard-wired here.
 	 */
 	link->conf.Attributes = 0;
-	link->conf.IntType = INT_MEMORY_AND_IO;
 
 	pcmcia_cur_dev = link;
 

drivers/staging/comedi/drivers/ni_daq_dio24.c

@@ -251,7 +251,6 @@ static int dio24_cs_attach(struct pcmcia_device *link)
 	   device, and can be hard-wired here.
 	 */
 	link->conf.Attributes = 0;
-	link->conf.IntType = INT_MEMORY_AND_IO;
 
 	pcmcia_cur_dev = link;
 

drivers/staging/comedi/drivers/ni_labpc_cs.c

@@ -227,7 +227,6 @@ static int labpc_cs_attach(struct pcmcia_device *link)
 	   device, and can be hard-wired here.
 	 */
 	link->conf.Attributes = 0;
-	link->conf.IntType = INT_MEMORY_AND_IO;
 
 	pcmcia_cur_dev = link;
 

drivers/staging/comedi/drivers/ni_mio_cs.c

@@ -266,7 +266,6 @@ static int cs_attach(struct pcmcia_device *link)
 	link->resource[0]->flags |= IO_DATA_PATH_WIDTH_16;
 	link->resource[0]->end = 16;
 	link->conf.Attributes = CONF_ENABLE_IRQ;
-	link->conf.IntType = INT_MEMORY_AND_IO;
 
 	cur_dev = link;
 

drivers/staging/comedi/drivers/quatech_daqp_cs.c

@@ -1039,7 +1039,6 @@ static int daqp_cs_attach(struct pcmcia_device *link)
 	   device, and can be hard-wired here.
 	 */
 	link->conf.Attributes = 0;
-	link->conf.IntType = INT_MEMORY_AND_IO;
 
 	daqp_cs_config(link);
 

drivers/staging/wlags49_h2/wl_cs.c

@@ -148,7 +148,6 @@ static int wl_adapter_attach(struct pcmcia_device *link)
 	link->resource[0]->end  = HCF_NUM_IO_PORTS;
 	link->resource[0]->flags= IO_DATA_PATH_WIDTH_16;
 	link->conf.Attributes   = CONF_ENABLE_IRQ;
-	link->conf.IntType      = INT_MEMORY_AND_IO;
 	link->conf.ConfigIndex  = 5;
 	link->conf.Present      = PRESENT_OPTION;
 

drivers/telephony/ixj_pcmcia.c

@@ -34,7 +34,6 @@ static int ixj_probe(struct pcmcia_device *p_dev)
 	/* Create new ixj device */
 	p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
 	p_dev->resource[1]->flags |= IO_DATA_PATH_WIDTH_8;
-	p_dev->conf.IntType = INT_MEMORY_AND_IO;
 	p_dev->priv = kzalloc(sizeof(struct ixj_info_t), GFP_KERNEL);
 	if (!p_dev->priv) {
 		return -ENOMEM;

drivers/usb/host/sl811_cs.c

@@ -228,7 +228,6 @@ static int sl811_cs_probe(struct pcmcia_device *link)
 	link->priv = local;
 
 	link->conf.Attributes = 0;
-	link->conf.IntType = INT_MEMORY_AND_IO;
 
 	return sl811_cs_config(link);
 }

include/pcmcia/cs.h

@@ -22,7 +22,6 @@
 /* For RequestConfiguration */
 typedef struct config_req_t {
     u_int	Attributes;
-    u_int	IntType;
     u_int	ConfigBase;
     u_char	ConfigIndex;
     u_int	Present;
@@ -36,12 +35,6 @@ typedef struct config_req_t {
 #define CONF_ENABLE_ESR		0x10
 #define CONF_VALID_CLIENT	0x100
 
-/* IntType field */
-#define INT_MEMORY		0x01
-#define INT_MEMORY_AND_IO	0x02
-#define INT_CARDBUS		0x04
-#define INT_ZOOMED_VIDEO	0x08
-
 /* Configuration registers present */
 #define PRESENT_OPTION		0x001
 #define PRESENT_STATUS		0x002

sound/pcmcia/pdaudiocf/pdaudiocf.c

@@ -143,7 +143,6 @@ static int snd_pdacf_probe(struct pcmcia_device *link)
 	link->resource[0]->end = 16;
 
 	link->conf.Attributes = CONF_ENABLE_IRQ | CONF_ENABLE_PULSE_IRQ;
-	link->conf.IntType = INT_MEMORY_AND_IO;
 	link->conf.ConfigIndex = 1;
 	link->conf.Present = PRESENT_OPTION;
 

sound/pcmcia/vx/vxpocket.c

@@ -163,7 +163,6 @@ static int snd_vxpocket_new(struct snd_card *card, int ibl,
 	link->resource[0]->end = 16;
 
 	link->conf.Attributes = CONF_ENABLE_IRQ;
-	link->conf.IntType = INT_MEMORY_AND_IO;
 	link->conf.ConfigIndex = 1;
 	link->conf.Present = PRESENT_OPTION;