Merge remote-tracking branch 'agust/next' into next

Brings some 52xx updates. Also manually merged tools/perf/perf.h.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

CREDITS

@@ -1823,6 +1823,11 @@ S: Kattreinstr 38
 S: D-64295
 S: Germany
 
+N: Avi Kivity
+E: avi.kivity@gmail.com
+D: Kernel-based Virtual Machine (KVM)
+S: Ra'annana, Israel
+
 N: Andi Kleen
 E: andi@firstfloor.org
 U: http://www.halobates.de

Documentation/arm64/memory.txt

@@ -27,17 +27,17 @@ Start			End			Size		Use
 -----------------------------------------------------------------------
 0000000000000000	0000007fffffffff	 512GB		user
 
-ffffff8000000000	ffffffbbfffcffff	~240GB		vmalloc
+ffffff8000000000	ffffffbbfffeffff	~240GB		vmalloc
 
-ffffffbbfffd0000	ffffffbcfffdffff	  64KB		[guard page]
+ffffffbbffff0000	ffffffbbffffffff	  64KB		[guard page]
 
-ffffffbbfffe0000	ffffffbcfffeffff	  64KB		PCI I/O space
+ffffffbc00000000	ffffffbdffffffff	   8GB		vmemmap
 
-ffffffbbffff0000	ffffffbcffffffff	  64KB		[guard page]
+ffffffbe00000000	ffffffbffbbfffff	  ~8GB		[guard, future vmmemap]
 
-ffffffbc00000000	ffffffbdffffffff	   8GB		vmemmap
+ffffffbffbe00000	ffffffbffbe0ffff	  64KB		PCI I/O space
 
-ffffffbe00000000	ffffffbffbffffff	  ~8GB		[guard, future vmmemap]
+ffffffbbffff0000	ffffffbcffffffff	  ~2MB		[guard]
 
 ffffffbffc000000	ffffffbfffffffff	  64MB		modules
 

Documentation/cgroups/memory.txt

@@ -466,6 +466,10 @@ Note:
 5.3 swappiness
 
 Similar to /proc/sys/vm/swappiness, but affecting a hierarchy of groups only.
+Please note that unlike the global swappiness, memcg knob set to 0
+really prevents from any swapping even if there is a swap storage
+available. This might lead to memcg OOM killer if there are no file
+pages to reclaim.
 
 Following cgroups' swappiness can't be changed.
 - root cgroup (uses /proc/sys/vm/swappiness).

Documentation/devicetree/bindings/input/touchscreen/egalax-ts.txt

@@ -0,0 +1,19 @@
+* EETI eGalax Multiple Touch Controller
+
+Required properties:
+- compatible: must be "eeti,egalax_ts"
+- reg: i2c slave address
+- interrupt-parent: the phandle for the interrupt controller
+- interrupts: touch controller interrupt
+- wakeup-gpios: the gpio pin to be used for waking up the controller
+  as well as uased as irq pin
+
+Example:
+
+	egalax_ts@04 {
+		compatible = "eeti,egalax_ts";
+		reg = <0x04>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <9 2>;
+		wakeup-gpios = <&gpio1 9 0>;
+	};

Documentation/devicetree/bindings/net/mdio-gpio.txt

@@ -8,9 +8,16 @@ gpios property as described in section VIII.1 in the following order:
 
 MDC, MDIO.
 
+Note: Each gpio-mdio bus should have an alias correctly numbered in "aliases"
+node.
+
 Example:
 
-mdio {
+aliases {
+	mdio-gpio0 = <&mdio0>;
+};
+
+mdio0: mdio {
 	compatible = "virtual,mdio-gpio";
 	#address-cells = <1>;
 	#size-cells = <0>;

Documentation/filesystems/proc.txt

@@ -33,7 +33,7 @@ Table of Contents
   2	Modifying System Parameters
 
   3	Per-Process Parameters
-  3.1	/proc/<pid>/oom_score_adj - Adjust the oom-killer
+  3.1	/proc/<pid>/oom_adj & /proc/<pid>/oom_score_adj - Adjust the oom-killer
 								score
   3.2	/proc/<pid>/oom_score - Display current oom-killer score
   3.3	/proc/<pid>/io - Display the IO accounting fields
@@ -1320,10 +1320,10 @@ of the kernel.
 CHAPTER 3: PER-PROCESS PARAMETERS
 ------------------------------------------------------------------------------
 
-3.1 /proc/<pid>/oom_score_adj- Adjust the oom-killer score
+3.1 /proc/<pid>/oom_adj & /proc/<pid>/oom_score_adj- Adjust the oom-killer score
 --------------------------------------------------------------------------------
 
-This file can be used to adjust the badness heuristic used to select which
+These file can be used to adjust the badness heuristic used to select which
 process gets killed in out of memory conditions.
 
 The badness heuristic assigns a value to each candidate task ranging from 0
@@ -1361,6 +1361,12 @@ same system, cpuset, mempolicy, or memory controller resources to use at least
 equivalent to discounting 50% of the task's allowed memory from being considered
 as scoring against the task.
 
+For backwards compatibility with previous kernels, /proc/<pid>/oom_adj may also
+be used to tune the badness score.  Its acceptable values range from -16
+(OOM_ADJUST_MIN) to +15 (OOM_ADJUST_MAX) and a special value of -17
+(OOM_DISABLE) to disable oom killing entirely for that task.  Its value is
+scaled linearly with /proc/<pid>/oom_score_adj.
+
 The value of /proc/<pid>/oom_score_adj may be reduced no lower than the last
 value set by a CAP_SYS_RESOURCE process. To reduce the value any lower
 requires CAP_SYS_RESOURCE.
@@ -1375,7 +1381,9 @@ minimal amount of work.
 -------------------------------------------------------------
 
 This file can be used to check the current score used by the oom-killer is for
-any given <pid>.
+any given <pid>. Use it together with /proc/<pid>/oom_score_adj to tune which
+process should be killed in an out-of-memory situation.
+
 
 3.3  /proc/<pid>/io - Display the IO accounting fields
 -------------------------------------------------------

Documentation/hwmon/fam15h_power

@@ -10,7 +10,7 @@ Supported chips:
   BIOS and Kernel Developer's Guide (BKDG) For AMD Family 15h Processors
     (not yet published)
 
-Author: Andreas Herrmann <andreas.herrmann3@amd.com>
+Author: Andreas Herrmann <herrmann.der.user@googlemail.com>
 
 Description
 -----------

Documentation/networking/netdev-features.txt

@@ -164,4 +164,4 @@ read the CRC recorded by the NIC on receipt of the packet.
 This requests that the NIC receive all possible frames, including errored
 frames (such as bad FCS, etc).  This can be helpful when sniffing a link with
 bad packets on it.  Some NICs may receive more packets if also put into normal
-PROMISC mdoe.
+PROMISC mode.

Documentation/networking/vxlan.txt

@@ -32,7 +32,7 @@ no entry is in the forwarding table.
   # ip link delete vxlan0
 
 3. Show vxlan info
-  # ip -d show vxlan0
+  # ip -d link show vxlan0
 
 It is possible to create, destroy and display the vxlan
 forwarding table using the new bridge command.
@@ -41,7 +41,7 @@ forwarding table using the new bridge command.
   # bridge fdb add to 00:17:42:8a:b4:05 dst 192.19.0.2 dev vxlan0
 
 2. Delete forwarding table entry
-  # bridge fdb delete 00:17:42:8a:b4:05
+  # bridge fdb delete 00:17:42:8a:b4:05 dev vxlan0
 
 3. Show forwarding table
   # bridge fdb show dev vxlan0

MAINTAINERS

@@ -503,7 +503,7 @@ F:	include/linux/altera_uart.h
 F:	include/linux/altera_jtaguart.h
 
 AMD FAM15H PROCESSOR POWER MONITORING DRIVER
-M:	Andreas Herrmann <andreas.herrmann3@amd.com>
+M:	Andreas Herrmann <herrmann.der.user@googlemail.com>
 L:	lm-sensors@lm-sensors.org
 S:	Maintained
 F:	Documentation/hwmon/fam15h_power
@@ -526,17 +526,17 @@ F:	drivers/video/geode/
 F:	arch/x86/include/asm/geode.h
 
 AMD IOMMU (AMD-VI)
-M:	Joerg Roedel <joerg.roedel@amd.com>
+M:	Joerg Roedel <joro@8bytes.org>
 L:	iommu@lists.linux-foundation.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu.git
-S:	Supported
+S:	Maintained
 F:	drivers/iommu/amd_iommu*.[ch]
 F:	include/linux/amd-iommu.h
 
 AMD MICROCODE UPDATE SUPPORT
-M:	Andreas Herrmann <andreas.herrmann3@amd.com>
+M:	Andreas Herrmann <herrmann.der.user@googlemail.com>
 L:	amd64-microcode@amd64.org
-S:	Supported
+S:	Maintained
 F:	arch/x86/kernel/microcode_amd.c
 
 AMS (Apple Motion Sensor) DRIVER
@@ -841,6 +841,14 @@ T:	git git://git.kernel.org/pub/scm/linux/kernel/git/kristoffer/linux-hpc.git
 F:	arch/arm/mach-sa1100/jornada720.c
 F:	arch/arm/mach-sa1100/include/mach/jornada720.h
 
+ARM/IGEP MACHINE SUPPORT
+M:	Enric Balletbo i Serra <eballetbo@gmail.com>
+M:	Javier Martinez Canillas <javier@dowhile0.org>
+L:	linux-omap@vger.kernel.org
+L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S:	Maintained
+F:	arch/arm/mach-omap2/board-igep0020.c
+
 ARM/INCOME PXA270 SUPPORT
 M:	Marek Vasut <marek.vasut@gmail.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
@@ -2507,6 +2515,7 @@ M:	Joonyoung Shim <jy0922.shim@samsung.com>
 M:	Seung-Woo Kim <sw0312.kim@samsung.com>
 M:	Kyungmin Park <kyungmin.park@samsung.com>
 L:	dri-devel@lists.freedesktop.org
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos.git
 S:	Supported
 F:	drivers/gpu/drm/exynos
 F:	include/drm/exynos*
@@ -2707,10 +2716,10 @@ F:	include/linux/edac.h
 
 EDAC-AMD64
 M:	Doug Thompson <dougthompson@xmission.com>
-M:	Borislav Petkov <borislav.petkov@amd.com>
+M:	Borislav Petkov <bp@alien8.de>
 L:	linux-edac@vger.kernel.org
 W:	bluesmoke.sourceforge.net
-S:	Supported
+S:	Maintained
 F:	drivers/edac/amd64_edac*
 
 EDAC-E752X
@@ -3597,6 +3606,49 @@ F:	drivers/hid/hid-hyperv.c
 F:	drivers/net/hyperv/
 F:	drivers/staging/hv/
 
+I2C OVER PARALLEL PORT
+M:	Jean Delvare <khali@linux-fr.org>
+L:	linux-i2c@vger.kernel.org
+S:	Maintained
+F:	Documentation/i2c/busses/i2c-parport
+F:	Documentation/i2c/busses/i2c-parport-light
+F:	drivers/i2c/busses/i2c-parport.c
+F:	drivers/i2c/busses/i2c-parport-light.c
+
+I2C/SMBUS CONTROLLER DRIVERS FOR PC
+M:	Jean Delvare <khali@linux-fr.org>
+L:	linux-i2c@vger.kernel.org
+S:	Maintained
+F:	Documentation/i2c/busses/i2c-ali1535
+F:	Documentation/i2c/busses/i2c-ali1563
+F:	Documentation/i2c/busses/i2c-ali15x3
+F:	Documentation/i2c/busses/i2c-amd756
+F:	Documentation/i2c/busses/i2c-amd8111
+F:	Documentation/i2c/busses/i2c-i801
+F:	Documentation/i2c/busses/i2c-nforce2
+F:	Documentation/i2c/busses/i2c-piix4
+F:	Documentation/i2c/busses/i2c-sis5595
+F:	Documentation/i2c/busses/i2c-sis630
+F:	Documentation/i2c/busses/i2c-sis96x
+F:	Documentation/i2c/busses/i2c-via
+F:	Documentation/i2c/busses/i2c-viapro
+F:	drivers/i2c/busses/i2c-ali1535.c
+F:	drivers/i2c/busses/i2c-ali1563.c
+F:	drivers/i2c/busses/i2c-ali15x3.c
+F:	drivers/i2c/busses/i2c-amd756.c
+F:	drivers/i2c/busses/i2c-amd756-s4882.c
+F:	drivers/i2c/busses/i2c-amd8111.c
+F:	drivers/i2c/busses/i2c-i801.c
+F:	drivers/i2c/busses/i2c-isch.c
+F:	drivers/i2c/busses/i2c-nforce2.c
+F:	drivers/i2c/busses/i2c-nforce2-s4985.c
+F:	drivers/i2c/busses/i2c-piix4.c
+F:	drivers/i2c/busses/i2c-sis5595.c
+F:	drivers/i2c/busses/i2c-sis630.c
+F:	drivers/i2c/busses/i2c-sis96x.c
+F:	drivers/i2c/busses/i2c-via.c
+F:	drivers/i2c/busses/i2c-viapro.c
+
 I2C/SMBUS STUB DRIVER
 M:	"Mark M. Hoffman" <mhoffman@lightlink.com>
 L:	linux-i2c@vger.kernel.org
@@ -3604,9 +3656,8 @@ S:	Maintained
 F:	drivers/i2c/busses/i2c-stub.c
 
 I2C SUBSYSTEM
-M:	"Jean Delvare (PC drivers, core)" <khali@linux-fr.org>
+M:	Wolfram Sang <w.sang@pengutronix.de>
 M:	"Ben Dooks (embedded platforms)" <ben-linux@fluff.org>
-M:	"Wolfram Sang (embedded platforms)" <w.sang@pengutronix.de>
 L:	linux-i2c@vger.kernel.org
 W:	http://i2c.wiki.kernel.org/
 T:	quilt kernel.org/pub/linux/kernel/people/jdelvare/linux-2.6/jdelvare-i2c/
@@ -3617,6 +3668,13 @@ F:	drivers/i2c/
 F:	include/linux/i2c.h
 F:	include/linux/i2c-*.h
 
+I2C-TAOS-EVM DRIVER
+M:	Jean Delvare <khali@linux-fr.org>
+L:	linux-i2c@vger.kernel.org
+S:	Maintained
+F:	Documentation/i2c/busses/i2c-taos-evm
+F:	drivers/i2c/busses/i2c-taos-evm.c
+
 I2C-TINY-USB DRIVER
 M:	Till Harbaum <till@harbaum.org>
 L:	linux-i2c@vger.kernel.org
@@ -3703,7 +3761,7 @@ S:	Maintained
 F:	drivers/platform/x86/ideapad-laptop.c
 
 IDE/ATAPI DRIVERS
-M:	Borislav Petkov <petkovbb@gmail.com>
+M:	Borislav Petkov <bp@alien8.de>
 L:	linux-ide@vger.kernel.org
 S:	Maintained
 F:	Documentation/cdrom/ide-cd
@@ -4230,8 +4288,8 @@ F:	include/linux/lockd/
 F:	include/linux/sunrpc/
 
 KERNEL VIRTUAL MACHINE (KVM)
-M:	Avi Kivity <avi@redhat.com>
 M:	Marcelo Tosatti <mtosatti@redhat.com>
+M:	Gleb Natapov <gleb@redhat.com>
 L:	kvm@vger.kernel.org
 W:	http://kvm.qumranet.com
 S:	Supported
@@ -5363,7 +5421,7 @@ S:	Maintained
 F:	sound/drivers/opl4/
 
 OPROFILE
-M:	Robert Richter <robert.richter@amd.com>
+M:	Robert Richter <rric@kernel.org>
 L:	oprofile-list@lists.sf.net
 S:	Maintained
 F:	arch/*/include/asm/oprofile*.h
@@ -7209,6 +7267,14 @@ L:	linux-xtensa@linux-xtensa.org
 S:	Maintained
 F:	arch/xtensa/
 
+THERMAL
+M:      Zhang Rui <rui.zhang@intel.com>
+L:      linux-pm@vger.kernel.org
+T:      git git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux.git
+S:      Supported
+F:      drivers/thermal/
+F:      include/linux/thermal.h
+
 THINKPAD ACPI EXTRAS DRIVER
 M:	Henrique de Moraes Holschuh <ibm-acpi@hmh.eng.br>
 L:	ibm-acpi-devel@lists.sourceforge.net
@@ -7886,13 +7952,6 @@ M:	Roger Luethi <rl@hellgate.ch>
 S:	Maintained
 F:	drivers/net/ethernet/via/via-rhine.c
 
-VIAPRO SMBUS DRIVER
-M:	Jean Delvare <khali@linux-fr.org>
-L:	linux-i2c@vger.kernel.org
-S:	Maintained
-F:	Documentation/i2c/busses/i2c-viapro
-F:	drivers/i2c/busses/i2c-viapro.c
-
 VIA SD/MMC CARD CONTROLLER DRIVER
 M:	Bruce Chang <brucechang@via.com.tw>
 M:	Harald Welte <HaraldWelte@viatech.com>
@@ -8147,7 +8206,7 @@ F:	drivers/platform/x86
 
 X86 MCE INFRASTRUCTURE
 M:	Tony Luck <tony.luck@intel.com>
-M:	Borislav Petkov <bp@amd64.org>
+M:	Borislav Petkov <bp@alien8.de>
 L:	linux-edac@vger.kernel.org
 S:	Maintained
 F:	arch/x86/kernel/cpu/mcheck/*

Makefile

@@ -1,7 +1,7 @@
 VERSION = 3
 PATCHLEVEL = 7
 SUBLEVEL = 0
-EXTRAVERSION = -rc3
+EXTRAVERSION = -rc8
 NAME = Terrified Chipmunk
 
 # *DOCUMENTATION*
@@ -1321,10 +1321,12 @@ kernelversion:
 
 # Clear a bunch of variables before executing the submake
 tools/: FORCE
-	$(Q)$(MAKE) LDFLAGS= MAKEFLAGS= -C $(src)/tools/
+	$(Q)mkdir -p $(objtree)/tools
+	$(Q)$(MAKE) LDFLAGS= MAKEFLAGS= O=$(objtree) subdir=tools -C $(src)/tools/
 
 tools/%: FORCE
-	$(Q)$(MAKE) LDFLAGS= MAKEFLAGS= -C $(src)/tools/ $*
+	$(Q)mkdir -p $(objtree)/tools
+	$(Q)$(MAKE) LDFLAGS= MAKEFLAGS= O=$(objtree) subdir=tools -C $(src)/tools/ $*
 
 # Single targets
 # ---------------------------------------------------------------------------

arch/alpha/kernel/osf_sys.c

@@ -445,7 +445,7 @@ struct procfs_args {
  * unhappy with OSF UFS. [CHECKME]
  */
 static int
-osf_ufs_mount(char *dirname, struct ufs_args __user *args, int flags)
+osf_ufs_mount(const char *dirname, struct ufs_args __user *args, int flags)
 {
 	int retval;
 	struct cdfs_args tmp;
@@ -465,7 +465,7 @@ osf_ufs_mount(char *dirname, struct ufs_args __user *args, int flags)
 }
 
 static int
-osf_cdfs_mount(char *dirname, struct cdfs_args __user *args, int flags)
+osf_cdfs_mount(const char *dirname, struct cdfs_args __user *args, int flags)
 {
 	int retval;
 	struct cdfs_args tmp;
@@ -485,7 +485,7 @@ osf_cdfs_mount(char *dirname, struct cdfs_args __user *args, int flags)
 }
 
 static int
-osf_procfs_mount(char *dirname, struct procfs_args __user *args, int flags)
+osf_procfs_mount(const char *dirname, struct procfs_args __user *args, int flags)
 {
 	struct procfs_args tmp;
 

arch/arm/Kconfig

@@ -547,6 +547,7 @@ config ARCH_KIRKWOOD
 	select CPU_FEROCEON
 	select GENERIC_CLOCKEVENTS
 	select PCI
+	select PCI_QUIRKS
 	select PLAT_ORION_LEGACY
 	help
 	  Support for the following Marvell Kirkwood series SoCs:

arch/arm/boot/Makefile

@@ -33,7 +33,7 @@ ifeq ($(CONFIG_XIP_KERNEL),y)
 
 $(obj)/xipImage: vmlinux FORCE
 	$(call if_changed,objcopy)
-	$(kecho) '  Kernel: $@ is ready (physical address: $(CONFIG_XIP_PHYS_ADDR))'
+	@$(kecho) '  Kernel: $@ is ready (physical address: $(CONFIG_XIP_PHYS_ADDR))'
 
 $(obj)/Image $(obj)/zImage: FORCE
 	@echo 'Kernel configured for XIP (CONFIG_XIP_KERNEL=y)'
@@ -48,14 +48,14 @@ $(obj)/xipImage: FORCE
 
 $(obj)/Image: vmlinux FORCE
 	$(call if_changed,objcopy)
-	$(kecho) '  Kernel: $@ is ready'
+	@$(kecho) '  Kernel: $@ is ready'
 
 $(obj)/compressed/vmlinux: $(obj)/Image FORCE
 	$(Q)$(MAKE) $(build)=$(obj)/compressed $@
 
 $(obj)/zImage:	$(obj)/compressed/vmlinux FORCE
 	$(call if_changed,objcopy)
-	$(kecho) '  Kernel: $@ is ready'
+	@$(kecho) '  Kernel: $@ is ready'
 
 endif
 
@@ -90,7 +90,7 @@ fi
 $(obj)/uImage:	$(obj)/zImage FORCE
 	@$(check_for_multiple_loadaddr)
 	$(call if_changed,uimage)
-	$(kecho) '  Image $@ is ready'
+	@$(kecho) '  Image $@ is ready'
 
 $(obj)/bootp/bootp: $(obj)/zImage initrd FORCE
 	$(Q)$(MAKE) $(build)=$(obj)/bootp $@
@@ -98,7 +98,7 @@ $(obj)/bootp/bootp: $(obj)/zImage initrd FORCE
 
 $(obj)/bootpImage: $(obj)/bootp/bootp FORCE
 	$(call if_changed,objcopy)
-	$(kecho) '  Kernel: $@ is ready'
+	@$(kecho) '  Kernel: $@ is ready'
 
 PHONY += initrd FORCE
 initrd:

arch/arm/boot/compressed/head.S

@@ -652,6 +652,15 @@ __setup_mmu:	sub	r3, r4, #16384		@ Page directory size
 		mov	pc, lr
 ENDPROC(__setup_mmu)
 
+@ Enable unaligned access on v6, to allow better code generation
+@ for the decompressor C code:
+__armv6_mmu_cache_on:
+		mrc	p15, 0, r0, c1, c0, 0	@ read SCTLR
+		bic	r0, r0, #2		@ A (no unaligned access fault)
+		orr	r0, r0, #1 << 22	@ U (v6 unaligned access model)
+		mcr	p15, 0, r0, c1, c0, 0	@ write SCTLR
+		b	__armv4_mmu_cache_on
+
 __arm926ejs_mmu_cache_on:
 #ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
 		mov	r0, #4			@ put dcache in WT mode
@@ -694,6 +703,9 @@ __armv7_mmu_cache_on:
 		bic	r0, r0, #1 << 28	@ clear SCTLR.TRE
 		orr	r0, r0, #0x5000		@ I-cache enable, RR cache replacement
 		orr	r0, r0, #0x003c		@ write buffer
+		bic	r0, r0, #2		@ A (no unaligned access fault)
+		orr	r0, r0, #1 << 22	@ U (v6 unaligned access model)
+						@ (needed for ARM1176)
 #ifdef CONFIG_MMU
 #ifdef CONFIG_CPU_ENDIAN_BE8
 		orr	r0, r0, #1 << 25	@ big-endian page tables
@@ -914,7 +926,7 @@ proc_types:
 
 		.word	0x0007b000		@ ARMv6
 		.word	0x000ff000
-		W(b)	__armv4_mmu_cache_on
+		W(b)	__armv6_mmu_cache_on
 		W(b)	__armv4_mmu_cache_off
 		W(b)	__armv6_mmu_cache_flush
 

arch/arm/boot/dts/tegra30.dtsi

@@ -73,8 +73,8 @@
 
 	pinmux: pinmux {
 		compatible = "nvidia,tegra30-pinmux";
-		reg = <0x70000868 0xd0    /* Pad control registers */
-		       0x70003000 0x3e0>; /* Mux registers */
+		reg = <0x70000868 0xd4    /* Pad control registers */
+		       0x70003000 0x3e4>; /* Mux registers */
 	};
 
 	serial@70006000 {

arch/arm/common/timer-sp.c

@@ -162,7 +162,6 @@ static struct clock_event_device sp804_clockevent = {
 	.set_mode	= sp804_set_mode,
 	.set_next_event	= sp804_set_next_event,
 	.rating		= 300,
-	.cpumask	= cpu_all_mask,
 };
 
 static struct irqaction sp804_timer_irq = {
@@ -185,6 +184,7 @@ void __init sp804_clockevents_init(void __iomem *base, unsigned int irq,
 	clkevt_reload = DIV_ROUND_CLOSEST(rate, HZ);
 	evt->name = name;
 	evt->irq = irq;
+	evt->cpumask = cpu_possible_mask;
 
 	setup_irq(irq, &sp804_timer_irq);
 	clockevents_config_and_register(evt, rate, 0xf, 0xffffffff);

arch/arm/include/asm/io.h

@@ -64,7 +64,7 @@ extern void __raw_readsl(const void __iomem *addr, void *data, int longlen);
 static inline void __raw_writew(u16 val, volatile void __iomem *addr)
 {
 	asm volatile("strh %1, %0"
-		     : "+Qo" (*(volatile u16 __force *)addr)
+		     : "+Q" (*(volatile u16 __force *)addr)
 		     : "r" (val));
 }
 
@@ -72,7 +72,7 @@ static inline u16 __raw_readw(const volatile void __iomem *addr)
 {
 	u16 val;
 	asm volatile("ldrh %1, %0"
-		     : "+Qo" (*(volatile u16 __force *)addr),
+		     : "+Q" (*(volatile u16 __force *)addr),
 		       "=r" (val));
 	return val;
 }

arch/arm/include/asm/sched_clock.h

@@ -10,7 +10,5 @@
 
 extern void sched_clock_postinit(void);
 extern void setup_sched_clock(u32 (*read)(void), int bits, unsigned long rate);
-extern void setup_sched_clock_needs_suspend(u32 (*read)(void), int bits,
-		unsigned long rate);
 
 #endif

arch/arm/include/asm/vfpmacros.h

@@ -27,9 +27,9 @@
 #if __LINUX_ARM_ARCH__ <= 6
 	ldr	\tmp, =elf_hwcap		    @ may not have MVFR regs
 	ldr	\tmp, [\tmp, #0]
-	tst	\tmp, #HWCAP_VFPv3D16
-	ldceql	p11, cr0, [\base],#32*4		    @ FLDMIAD \base!, {d16-d31}
-	addne	\base, \base, #32*4		    @ step over unused register space
+	tst	\tmp, #HWCAP_VFPD32
+	ldcnel	p11, cr0, [\base],#32*4		    @ FLDMIAD \base!, {d16-d31}
+	addeq	\base, \base, #32*4		    @ step over unused register space
 #else
 	VFPFMRX	\tmp, MVFR0			    @ Media and VFP Feature Register 0
 	and	\tmp, \tmp, #MVFR0_A_SIMD_MASK	    @ A_SIMD field
@@ -51,9 +51,9 @@
 #if __LINUX_ARM_ARCH__ <= 6
 	ldr	\tmp, =elf_hwcap		    @ may not have MVFR regs
 	ldr	\tmp, [\tmp, #0]
-	tst	\tmp, #HWCAP_VFPv3D16
-	stceql	p11, cr0, [\base],#32*4		    @ FSTMIAD \base!, {d16-d31}
-	addne	\base, \base, #32*4		    @ step over unused register space
+	tst	\tmp, #HWCAP_VFPD32
+	stcnel	p11, cr0, [\base],#32*4		    @ FSTMIAD \base!, {d16-d31}
+	addeq	\base, \base, #32*4		    @ step over unused register space
 #else
 	VFPFMRX	\tmp, MVFR0			    @ Media and VFP Feature Register 0
 	and	\tmp, \tmp, #MVFR0_A_SIMD_MASK	    @ A_SIMD field

arch/arm/include/uapi/asm/hwcap.h

@@ -18,11 +18,12 @@
 #define HWCAP_THUMBEE	(1 << 11)
 #define HWCAP_NEON	(1 << 12)
 #define HWCAP_VFPv3	(1 << 13)
-#define HWCAP_VFPv3D16	(1 << 14)
+#define HWCAP_VFPv3D16	(1 << 14)	/* also set for VFPv4-D16 */
 #define HWCAP_TLS	(1 << 15)
 #define HWCAP_VFPv4	(1 << 16)
 #define HWCAP_IDIVA	(1 << 17)
 #define HWCAP_IDIVT	(1 << 18)
+#define HWCAP_VFPD32	(1 << 19)	/* set if VFP has 32 regs (not 16) */
 #define HWCAP_IDIV	(HWCAP_IDIVA | HWCAP_IDIVT)
 
 

arch/arm/kernel/sched_clock.c

@@ -107,13 +107,6 @@ static void sched_clock_poll(unsigned long wrap_ticks)
 	update_sched_clock();
 }
 
-void __init setup_sched_clock_needs_suspend(u32 (*read)(void), int bits,
-		unsigned long rate)
-{
-	setup_sched_clock(read, bits, rate);
-	cd.needs_suspend = true;
-}
-
 void __init setup_sched_clock(u32 (*read)(void), int bits, unsigned long rate)
 {
 	unsigned long r, w;
@@ -189,18 +182,15 @@ void __init sched_clock_postinit(void)
 static int sched_clock_suspend(void)
 {
 	sched_clock_poll(sched_clock_timer.data);
-	if (cd.needs_suspend)
-		cd.suspended = true;
+	cd.suspended = true;
 	return 0;
 }
 
 static void sched_clock_resume(void)
 {
-	if (cd.needs_suspend) {
-		cd.epoch_cyc = read_sched_clock();
-		cd.epoch_cyc_copy = cd.epoch_cyc;
-		cd.suspended = false;
-	}
+	cd.epoch_cyc = read_sched_clock();
+	cd.epoch_cyc_copy = cd.epoch_cyc;
+	cd.suspended = false;
 }
 
 static struct syscore_ops sched_clock_ops = {

arch/arm/mach-at91/at91rm9200_devices.c

@@ -68,7 +68,7 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data)
 
 	/* Enable overcurrent notification */
 	for (i = 0; i < data->ports; i++) {
-		if (data->overcurrent_pin[i])
+		if (gpio_is_valid(data->overcurrent_pin[i]))
 			at91_set_gpio_input(data->overcurrent_pin[i], 1);
 	}
 

arch/arm/mach-at91/at91sam9260_devices.c

@@ -72,7 +72,7 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data)
 
 	/* Enable overcurrent notification */
 	for (i = 0; i < data->ports; i++) {
-		if (data->overcurrent_pin[i])
+		if (gpio_is_valid(data->overcurrent_pin[i]))
 			at91_set_gpio_input(data->overcurrent_pin[i], 1);
 	}
 

arch/arm/mach-at91/at91sam9261_devices.c

@@ -72,7 +72,7 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data)
 
 	/* Enable overcurrent notification */
 	for (i = 0; i < data->ports; i++) {
-		if (data->overcurrent_pin[i])
+		if (gpio_is_valid(data->overcurrent_pin[i]))
 			at91_set_gpio_input(data->overcurrent_pin[i], 1);
 	}
 

arch/arm/mach-at91/at91sam9263_devices.c

@@ -78,7 +78,7 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data)
 
 	/* Enable overcurrent notification */
 	for (i = 0; i < data->ports; i++) {
-		if (data->overcurrent_pin[i])
+		if (gpio_is_valid(data->overcurrent_pin[i]))
 			at91_set_gpio_input(data->overcurrent_pin[i], 1);
 	}
 

arch/arm/mach-at91/at91sam9g45_devices.c

@@ -1841,8 +1841,8 @@ static struct resource sha_resources[] = {
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
-		.start	= AT91SAM9G45_ID_AESTDESSHA,
-		.end	= AT91SAM9G45_ID_AESTDESSHA,
+		.start	= NR_IRQS_LEGACY + AT91SAM9G45_ID_AESTDESSHA,
+		.end	= NR_IRQS_LEGACY + AT91SAM9G45_ID_AESTDESSHA,
 		.flags	= IORESOURCE_IRQ,
 	},
 };
@@ -1874,8 +1874,8 @@ static struct resource tdes_resources[] = {
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
-		.start	= AT91SAM9G45_ID_AESTDESSHA,
-		.end	= AT91SAM9G45_ID_AESTDESSHA,
+		.start	= NR_IRQS_LEGACY + AT91SAM9G45_ID_AESTDESSHA,
+		.end	= NR_IRQS_LEGACY + AT91SAM9G45_ID_AESTDESSHA,
 		.flags	= IORESOURCE_IRQ,
 	},
 };
@@ -1910,8 +1910,8 @@ static struct resource aes_resources[] = {
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
-		.start	= AT91SAM9G45_ID_AESTDESSHA,
-		.end	= AT91SAM9G45_ID_AESTDESSHA,
+		.start	= NR_IRQS_LEGACY + AT91SAM9G45_ID_AESTDESSHA,
+		.end	= NR_IRQS_LEGACY + AT91SAM9G45_ID_AESTDESSHA,
 		.flags	= IORESOURCE_IRQ,
 	},
 };

arch/arm/mach-davinci/dm644x.c

@@ -713,8 +713,7 @@ static int dm644x_venc_setup_clock(enum vpbe_enc_timings_type type,
 		break;
 	case VPBE_ENC_CUSTOM_TIMINGS:
 		if (pclock <= 27000000) {
-			v |= DM644X_VPSS_MUXSEL_PLL2_MODE |
-			     DM644X_VPSS_DACCLKEN;
+			v |= DM644X_VPSS_DACCLKEN;
 			writel(v, DAVINCI_SYSMOD_VIRT(SYSMOD_VPSS_CLKCTL));
 		} else {
 			/*

arch/arm/mach-dove/include/mach/pm.h

@@ -63,7 +63,7 @@ static inline int pmu_to_irq(int pin)
 
 static inline int irq_to_pmu(int irq)
 {
-	if (IRQ_DOVE_PMU_START < irq && irq < NR_IRQS)
+	if (IRQ_DOVE_PMU_START <= irq && irq < NR_IRQS)
 		return irq - IRQ_DOVE_PMU_START;
 
 	return -EINVAL;

arch/arm/mach-dove/irq.c

@@ -46,8 +46,20 @@ static void pmu_irq_ack(struct irq_data *d)
 	int pin = irq_to_pmu(d->irq);
 	u32 u;
 
+	/*
+	 * The PMU mask register is not RW0C: it is RW.  This means that
+	 * the bits take whatever value is written to them; if you write
+	 * a '1', you will set the interrupt.
+	 *
+	 * Unfortunately this means there is NO race free way to clear
+	 * these interrupts.
+	 *
+	 * So, let's structure the code so that the window is as small as
+	 * possible.
+	 */
 	u = ~(1 << (pin & 31));
-	writel(u, PMU_INTERRUPT_CAUSE);
+	u &= readl_relaxed(PMU_INTERRUPT_CAUSE);
+	writel_relaxed(u, PMU_INTERRUPT_CAUSE);
 }
 
 static struct irq_chip pmu_irq_chip = {

arch/arm/mach-exynos/dma.c

@@ -275,6 +275,9 @@ static int __init exynos_dma_init(void)
 		exynos_pdma1_pdata.nr_valid_peri =
 			ARRAY_SIZE(exynos4210_pdma1_peri);
 		exynos_pdma1_pdata.peri_id = exynos4210_pdma1_peri;
+
+		if (samsung_rev() == EXYNOS4210_REV_0)
+			exynos_mdma1_device.res.start = EXYNOS4_PA_S_MDMA1;
 	} else if (soc_is_exynos4212() || soc_is_exynos4412()) {
 		exynos_pdma0_pdata.nr_valid_peri =
 			ARRAY_SIZE(exynos4212_pdma0_peri);

arch/arm/mach-exynos/include/mach/map.h

@@ -90,6 +90,7 @@
 
 #define EXYNOS4_PA_MDMA0		0x10810000
 #define EXYNOS4_PA_MDMA1		0x12850000
+#define EXYNOS4_PA_S_MDMA1		0x12840000
 #define EXYNOS4_PA_PDMA0		0x12680000
 #define EXYNOS4_PA_PDMA1		0x12690000
 #define EXYNOS5_PA_MDMA0		0x10800000

arch/arm/mach-highbank/system.c

@@ -28,6 +28,7 @@ void highbank_restart(char mode, const char *cmd)
 		hignbank_set_pwr_soft_reset();
 
 	scu_power_mode(scu_base_addr, SCU_PM_POWEROFF);
-	cpu_do_idle();
+	while (1)
+		cpu_do_idle();
 }
 

arch/arm/mach-imx/clk-gate2.c

@@ -112,7 +112,7 @@ struct clk *clk_register_gate2(struct device *dev, const char *name,
 
 	clk = clk_register(dev, &gate->hw);
 	if (IS_ERR(clk))
-		kfree(clk);
+		kfree(gate);
 
 	return clk;
 }

arch/arm/mach-imx/ehci-imx25.c

@@ -30,7 +30,7 @@
 #define MX25_H1_SIC_SHIFT	21
 #define MX25_H1_SIC_MASK	(0x3 << MX25_H1_SIC_SHIFT)
 #define MX25_H1_PP_BIT		(1 << 18)
-#define MX25_H1_PM_BIT		(1 << 8)
+#define MX25_H1_PM_BIT		(1 << 16)
 #define MX25_H1_IPPUE_UP_BIT	(1 << 7)
 #define MX25_H1_IPPUE_DOWN_BIT	(1 << 6)
 #define MX25_H1_TLL_BIT		(1 << 5)

arch/arm/mach-imx/ehci-imx35.c

@@ -30,7 +30,7 @@
 #define MX35_H1_SIC_SHIFT	21
 #define MX35_H1_SIC_MASK	(0x3 << MX35_H1_SIC_SHIFT)
 #define MX35_H1_PP_BIT		(1 << 18)
-#define MX35_H1_PM_BIT		(1 << 8)
+#define MX35_H1_PM_BIT		(1 << 16)
 #define MX35_H1_IPPUE_UP_BIT	(1 << 7)
 #define MX35_H1_IPPUE_DOWN_BIT	(1 << 6)
 #define MX35_H1_TLL_BIT		(1 << 5)

arch/arm/mach-ixp4xx/common-pci.c

@@ -410,6 +410,7 @@ void __init ixp4xx_pci_preinit(void)
 		 * Enable the IO window to be way up high, at 0xfffffc00
 		 */
 		local_write_config(PCI_BASE_ADDRESS_5, 4, 0xfffffc01);
+		local_write_config(0x40, 4, 0x000080FF); /* No TRDY time limit */
 	} else {
 		printk("PCI: IXP4xx is target - No bus scan performed\n");
 	}

arch/arm/mach-ixp4xx/common.c

@@ -67,15 +67,12 @@ static struct map_desc ixp4xx_io_desc[] __initdata = {
 		.pfn		= __phys_to_pfn(IXP4XX_PCI_CFG_BASE_PHYS),
 		.length		= IXP4XX_PCI_CFG_REGION_SIZE,
 		.type		= MT_DEVICE
-	},
-#ifdef CONFIG_DEBUG_LL
-	{	/* Debug UART mapping */
-		.virtual	= (unsigned long)IXP4XX_DEBUG_UART_BASE_VIRT,
-		.pfn		= __phys_to_pfn(IXP4XX_DEBUG_UART_BASE_PHYS),
-		.length		= IXP4XX_DEBUG_UART_REGION_SIZE,
+	}, {	/* Queue Manager */
+		.virtual	= (unsigned long)IXP4XX_QMGR_BASE_VIRT,
+		.pfn		= __phys_to_pfn(IXP4XX_QMGR_BASE_PHYS),
+		.length		= IXP4XX_QMGR_REGION_SIZE,
 		.type		= MT_DEVICE
-	}
-#endif
+	},
 };
 
 void __init ixp4xx_map_io(void)

arch/arm/mach-ixp4xx/goramo_mlr.c

@@ -15,6 +15,7 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
 #include <asm/mach/pci.h>
+#include <asm/system_info.h>
 
 #define SLOT_ETHA		0x0B	/* IDSEL = AD21 */
 #define SLOT_ETHB		0x0C	/* IDSEL = AD20 */
@@ -329,7 +330,7 @@ static struct platform_device device_hss_tab[] = {
 };
 
 
-static struct platform_device *device_tab[6] __initdata = {
+static struct platform_device *device_tab[7] __initdata = {
 	&device_flash,		/* index 0 */
 };
 

arch/arm/mach-ixp4xx/include/mach/debug-macro.S

@@ -17,8 +17,8 @@
 #else
 		mov	\rp, #0
 #endif
-                orr     \rv, \rp, #0xff000000	@ virtual
-		orr	\rv, \rv, #0x00b00000
+		orr	\rv, \rp, #0xfe000000	@ virtual
+		orr	\rv, \rv, #0x00f00000
                 orr     \rp, \rp, #0xc8000000	@ physical
                 .endm
 

arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h

@@ -30,51 +30,43 @@
  *
  * 0x50000000	0x10000000	ioremap'd	EXP BUS
  *
- * 0x6000000	0x00004000	ioremap'd	QMgr
+ * 0xC8000000	0x00013000	0xFEF00000	On-Chip Peripherals
  *
- * 0xC0000000	0x00001000	0xffbff000	PCI CFG
+ * 0xC0000000	0x00001000	0xFEF13000	PCI CFG
  *
- * 0xC4000000	0x00001000	0xffbfe000	EXP CFG
+ * 0xC4000000	0x00001000	0xFEF14000	EXP CFG
  *
- * 0xC8000000	0x00013000	0xffbeb000	On-Chip Peripherals
+ * 0x60000000	0x00004000	0xFEF15000	QMgr
  */
 
 /*
  * Queue Manager
  */
-#define IXP4XX_QMGR_BASE_PHYS		(0x60000000)
-#define IXP4XX_QMGR_REGION_SIZE		(0x00004000)
+#define IXP4XX_QMGR_BASE_PHYS		0x60000000
+#define IXP4XX_QMGR_BASE_VIRT		IOMEM(0xFEF15000)
+#define IXP4XX_QMGR_REGION_SIZE		0x00004000
 
 /*
- * Expansion BUS Configuration registers
+ * Peripheral space, including debug UART. Must be section-aligned so that
+ * it can be used with the low-level debug code.
  */
-#define IXP4XX_EXP_CFG_BASE_PHYS	(0xC4000000)
-#define IXP4XX_EXP_CFG_BASE_VIRT	IOMEM(0xFFBFE000)
-#define IXP4XX_EXP_CFG_REGION_SIZE	(0x00001000)
+#define IXP4XX_PERIPHERAL_BASE_PHYS	0xC8000000
+#define IXP4XX_PERIPHERAL_BASE_VIRT	IOMEM(0xFEF00000)
+#define IXP4XX_PERIPHERAL_REGION_SIZE	0x00013000
 
 /*
  * PCI Config registers
  */
-#define IXP4XX_PCI_CFG_BASE_PHYS	(0xC0000000)
-#define	IXP4XX_PCI_CFG_BASE_VIRT	IOMEM(0xFFBFF000)
-#define IXP4XX_PCI_CFG_REGION_SIZE	(0x00001000)
-
-/*
- * Peripheral space
- */
-#define IXP4XX_PERIPHERAL_BASE_PHYS	(0xC8000000)
-#define IXP4XX_PERIPHERAL_BASE_VIRT	IOMEM(0xFFBEB000)
-#define IXP4XX_PERIPHERAL_REGION_SIZE	(0x00013000)
+#define IXP4XX_PCI_CFG_BASE_PHYS	0xC0000000
+#define IXP4XX_PCI_CFG_BASE_VIRT	IOMEM(0xFEF13000)
+#define IXP4XX_PCI_CFG_REGION_SIZE	0x00001000
 
 /*
- * Debug UART
- *
- * This is basically a remap of UART1 into a region that is section
- * aligned so that it * can be used with the low-level debug code.
+ * Expansion BUS Configuration registers
  */
-#define	IXP4XX_DEBUG_UART_BASE_PHYS	(0xC8000000)
-#define	IXP4XX_DEBUG_UART_BASE_VIRT	IOMEM(0xffb00000)
-#define	IXP4XX_DEBUG_UART_REGION_SIZE	(0x00001000)
+#define IXP4XX_EXP_CFG_BASE_PHYS	0xC4000000
+#define IXP4XX_EXP_CFG_BASE_VIRT	0xFEF14000
+#define IXP4XX_EXP_CFG_REGION_SIZE	0x00001000
 
 #define IXP4XX_EXP_CS0_OFFSET	0x00
 #define IXP4XX_EXP_CS1_OFFSET   0x04

arch/arm/mach-ixp4xx/include/mach/qmgr.h

@@ -86,7 +86,7 @@ void qmgr_release_queue(unsigned int queue);
 
 static inline void qmgr_put_entry(unsigned int queue, u32 val)
 {
-	extern struct qmgr_regs __iomem *qmgr_regs;
+	struct qmgr_regs __iomem *qmgr_regs = IXP4XX_QMGR_BASE_VIRT;
 #if DEBUG_QMGR
 	BUG_ON(!qmgr_queue_descs[queue]); /* not yet requested */
 
@@ -99,7 +99,7 @@ static inline void qmgr_put_entry(unsigned int queue, u32 val)
 static inline u32 qmgr_get_entry(unsigned int queue)
 {
 	u32 val;
-	extern struct qmgr_regs __iomem *qmgr_regs;
+	const struct qmgr_regs __iomem *qmgr_regs = IXP4XX_QMGR_BASE_VIRT;
 	val = __raw_readl(&qmgr_regs->acc[queue][0]);
 #if DEBUG_QMGR
 	BUG_ON(!qmgr_queue_descs[queue]); /* not yet requested */
@@ -112,14 +112,14 @@ static inline u32 qmgr_get_entry(unsigned int queue)
 
 static inline int __qmgr_get_stat1(unsigned int queue)
 {
-	extern struct qmgr_regs __iomem *qmgr_regs;
+	const struct qmgr_regs __iomem *qmgr_regs = IXP4XX_QMGR_BASE_VIRT;
 	return (__raw_readl(&qmgr_regs->stat1[queue >> 3])
 		>> ((queue & 7) << 2)) & 0xF;
 }
 
 static inline int __qmgr_get_stat2(unsigned int queue)
 {
-	extern struct qmgr_regs __iomem *qmgr_regs;
+	const struct qmgr_regs __iomem *qmgr_regs = IXP4XX_QMGR_BASE_VIRT;
 	BUG_ON(queue >= HALF_QUEUES);
 	return (__raw_readl(&qmgr_regs->stat2[queue >> 4])
 		>> ((queue & 0xF) << 1)) & 0x3;
@@ -145,7 +145,7 @@ static inline int qmgr_stat_empty(unsigned int queue)
  */
 static inline int qmgr_stat_below_low_watermark(unsigned int queue)
 {
-	extern struct qmgr_regs __iomem *qmgr_regs;
+	const struct qmgr_regs __iomem *qmgr_regs = IXP4XX_QMGR_BASE_VIRT;
 	if (queue >= HALF_QUEUES)
 		return (__raw_readl(&qmgr_regs->statne_h) >>
 			(queue - HALF_QUEUES)) & 0x01;
@@ -172,7 +172,7 @@ static inline int qmgr_stat_above_high_watermark(unsigned int queue)
  */
 static inline int qmgr_stat_full(unsigned int queue)
 {
-	extern struct qmgr_regs __iomem *qmgr_regs;
+	const struct qmgr_regs __iomem *qmgr_regs = IXP4XX_QMGR_BASE_VIRT;
 	if (queue >= HALF_QUEUES)
 		return (__raw_readl(&qmgr_regs->statf_h) >>
 			(queue - HALF_QUEUES)) & 0x01;

arch/arm/mach-ixp4xx/ixp4xx_npe.c

@@ -116,7 +116,11 @@
 /* NPE mailbox_status value for reset */
 #define RESET_MBOX_STAT			0x0000F0F0
 
-const char *npe_names[] = { "NPE-A", "NPE-B", "NPE-C" };
+#define NPE_A_FIRMWARE "NPE-A"
+#define NPE_B_FIRMWARE "NPE-B"
+#define NPE_C_FIRMWARE "NPE-C"
+
+const char *npe_names[] = { NPE_A_FIRMWARE, NPE_B_FIRMWARE, NPE_C_FIRMWARE };
 
 #define print_npe(pri, npe, fmt, ...)					\
 	printk(pri "%s: " fmt, npe_name(npe), ## __VA_ARGS__)
@@ -724,6 +728,9 @@ module_exit(npe_cleanup_module);
 
 MODULE_AUTHOR("Krzysztof Halasa");
 MODULE_LICENSE("GPL v2");
+MODULE_FIRMWARE(NPE_A_FIRMWARE);
+MODULE_FIRMWARE(NPE_B_FIRMWARE);
+MODULE_FIRMWARE(NPE_C_FIRMWARE);
 
 EXPORT_SYMBOL(npe_names);
 EXPORT_SYMBOL(npe_running);

arch/arm/mach-ixp4xx/ixp4xx_qmgr.c

@@ -14,7 +14,7 @@
 #include <linux/module.h>
 #include <mach/qmgr.h>
 
-struct qmgr_regs __iomem *qmgr_regs;
+static struct qmgr_regs __iomem *qmgr_regs = IXP4XX_QMGR_BASE_VIRT;
 static struct resource *mem_res;
 static spinlock_t qmgr_lock;
 static u32 used_sram_bitmap[4]; /* 128 16-dword pages */
@@ -293,12 +293,6 @@ static int qmgr_init(void)
 	if (mem_res == NULL)
 		return -EBUSY;
 
-	qmgr_regs = ioremap(IXP4XX_QMGR_BASE_PHYS, IXP4XX_QMGR_REGION_SIZE);
-	if (qmgr_regs == NULL) {
-		err = -ENOMEM;
-		goto error_map;
-	}
-
 	/* reset qmgr registers */
 	for (i = 0; i < 4; i++) {
 		__raw_writel(0x33333333, &qmgr_regs->stat1[i]);
@@ -347,8 +341,6 @@ static int qmgr_init(void)
 error_irq2:
 	free_irq(IRQ_IXP4XX_QM1, NULL);
 error_irq:
-	iounmap(qmgr_regs);
-error_map:
 	release_mem_region(IXP4XX_QMGR_BASE_PHYS, IXP4XX_QMGR_REGION_SIZE);
 	return err;
 }
@@ -359,7 +351,6 @@ static void qmgr_remove(void)
 	free_irq(IRQ_IXP4XX_QM2, NULL);
 	synchronize_irq(IRQ_IXP4XX_QM1);
 	synchronize_irq(IRQ_IXP4XX_QM2);
-	iounmap(qmgr_regs);
 	release_mem_region(IXP4XX_QMGR_BASE_PHYS, IXP4XX_QMGR_REGION_SIZE);
 }
 
@@ -369,7 +360,6 @@ module_exit(qmgr_remove);
 MODULE_LICENSE("GPL v2");
 MODULE_AUTHOR("Krzysztof Halasa");
 
-EXPORT_SYMBOL(qmgr_regs);
 EXPORT_SYMBOL(qmgr_set_irq);
 EXPORT_SYMBOL(qmgr_enable_irq);
 EXPORT_SYMBOL(qmgr_disable_irq);

arch/arm/mach-kirkwood/pcie.c

@@ -207,14 +207,19 @@ static int __init kirkwood_pcie_setup(int nr, struct pci_sys_data *sys)
 	return 1;
 }
 
+/*
+ * The root complex has a hardwired class of PCI_CLASS_MEMORY_OTHER, when it
+ * is operating as a root complex this needs to be switched to
+ * PCI_CLASS_BRIDGE_HOST or Linux will errantly try to process the BAR's on
+ * the device. Decoding setup is handled by the orion code.
+ */
 static void __devinit rc_pci_fixup(struct pci_dev *dev)
 {
-	/*
-	 * Prevent enumeration of root complex.
-	 */
 	if (dev->bus->parent == NULL && dev->devfn == 0) {
 		int i;
 
+		dev->class &= 0xff;
+		dev->class |= PCI_CLASS_BRIDGE_HOST << 8;
 		for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
 			dev->resource[i].start = 0;
 			dev->resource[i].end   = 0;

arch/arm/mach-omap2/board-igep0020.c

@@ -580,6 +580,11 @@ static void __init igep_wlan_bt_init(void)
 	} else
 		return;
 
+	/* Make sure that the GPIO pins are muxed correctly */
+	omap_mux_init_gpio(igep_wlan_bt_gpios[0].gpio, OMAP_PIN_OUTPUT);
+	omap_mux_init_gpio(igep_wlan_bt_gpios[1].gpio, OMAP_PIN_OUTPUT);
+	omap_mux_init_gpio(igep_wlan_bt_gpios[2].gpio, OMAP_PIN_OUTPUT);
+
 	err = gpio_request_array(igep_wlan_bt_gpios,
 				 ARRAY_SIZE(igep_wlan_bt_gpios));
 	if (err) {

arch/arm/mach-omap2/clockdomains44xx_data.c

@@ -359,7 +359,7 @@ static struct clockdomain iss_44xx_clkdm = {
 	.clkdm_offs	  = OMAP4430_CM2_CAM_CAM_CDOFFS,
 	.wkdep_srcs	  = iss_wkup_sleep_deps,
 	.sleepdep_srcs	  = iss_wkup_sleep_deps,
-	.flags		  = CLKDM_CAN_HWSUP_SWSUP,
+	.flags		  = CLKDM_CAN_SWSUP,
 };
 
 static struct clockdomain l3_dss_44xx_clkdm = {

arch/arm/mach-omap2/common-board-devices.c

@@ -64,30 +64,36 @@ void __init omap_ads7846_init(int bus_num, int gpio_pendown, int gpio_debounce,
 	struct spi_board_info *spi_bi = &ads7846_spi_board_info;
 	int err;
 
-	err = gpio_request_one(gpio_pendown, GPIOF_IN, "TSPenDown");
-	if (err) {
-		pr_err("Couldn't obtain gpio for TSPenDown: %d\n", err);
-		return;
-	}
+	/*
+	 * If a board defines get_pendown_state() function, request the pendown
+	 * GPIO and set the GPIO debounce time.
+	 * If a board does not define the get_pendown_state() function, then
+	 * the ads7846 driver will setup the pendown GPIO itself.
+	 */
+	if (board_pdata && board_pdata->get_pendown_state) {
+		err = gpio_request_one(gpio_pendown, GPIOF_IN, "TSPenDown");
+		if (err) {
+			pr_err("Couldn't obtain gpio for TSPenDown: %d\n", err);
+			return;
+		}
 
-	if (gpio_debounce)
-		gpio_set_debounce(gpio_pendown, gpio_debounce);
+		if (gpio_debounce)
+			gpio_set_debounce(gpio_pendown, gpio_debounce);
+
+		gpio_export(gpio_pendown, 0);
+	}
 
 	spi_bi->bus_num	= bus_num;
 	spi_bi->irq	= gpio_to_irq(gpio_pendown);
 
+	ads7846_config.gpio_pendown = gpio_pendown;
+
 	if (board_pdata) {
 		board_pdata->gpio_pendown = gpio_pendown;
+		board_pdata->gpio_pendown_debounce = gpio_debounce;
 		spi_bi->platform_data = board_pdata;
-		if (board_pdata->get_pendown_state)
-			gpio_export(gpio_pendown, 0);
-	} else {
-		ads7846_config.gpio_pendown = gpio_pendown;
 	}
 
-	if (!board_pdata || (board_pdata && !board_pdata->get_pendown_state))
-		gpio_free(gpio_pendown);
-
 	spi_register_board_info(&ads7846_spi_board_info, 1);
 }
 #else

arch/arm/mach-omap2/devices.c

@@ -19,6 +19,7 @@
 #include <linux/of.h>
 #include <linux/pinctrl/machine.h>
 #include <linux/platform_data/omap4-keypad.h>
+#include <linux/platform_data/omap_ocp2scp.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/map.h>
@@ -613,6 +614,83 @@ static void omap_init_vout(void)
 static inline void omap_init_vout(void) {}
 #endif
 
+#if defined(CONFIG_OMAP_OCP2SCP) || defined(CONFIG_OMAP_OCP2SCP_MODULE)
+static int count_ocp2scp_devices(struct omap_ocp2scp_dev *ocp2scp_dev)
+{
+	int cnt	= 0;
+
+	while (ocp2scp_dev->drv_name != NULL) {
+		cnt++;
+		ocp2scp_dev++;
+	}
+
+	return cnt;
+}
+
+static void omap_init_ocp2scp(void)
+{
+	struct omap_hwmod	*oh;
+	struct platform_device	*pdev;
+	int			bus_id = -1, dev_cnt = 0, i;
+	struct omap_ocp2scp_dev	*ocp2scp_dev;
+	const char		*oh_name, *name;
+	struct omap_ocp2scp_platform_data *pdata;
+
+	if (!cpu_is_omap44xx())
+		return;
+
+	oh_name = "ocp2scp_usb_phy";
+	name	= "omap-ocp2scp";
+
+	oh = omap_hwmod_lookup(oh_name);
+	if (!oh) {
+		pr_err("%s: could not find omap_hwmod for %s\n", __func__,
+								oh_name);
+		return;
+	}
+
+	pdata = kzalloc(sizeof(*pdata), GFP_KERNEL);
+	if (!pdata) {
+		pr_err("%s: No memory for ocp2scp pdata\n", __func__);
+		return;
+	}
+
+	ocp2scp_dev = oh->dev_attr;
+	dev_cnt = count_ocp2scp_devices(ocp2scp_dev);
+
+	if (!dev_cnt) {
+		pr_err("%s: No devices connected to ocp2scp\n", __func__);
+		kfree(pdata);
+		return;
+	}
+
+	pdata->devices = kzalloc(sizeof(struct omap_ocp2scp_dev *)
+					* dev_cnt, GFP_KERNEL);
+	if (!pdata->devices) {
+		pr_err("%s: No memory for ocp2scp pdata devices\n", __func__);
+		kfree(pdata);
+		return;
+	}
+
+	for (i = 0; i < dev_cnt; i++, ocp2scp_dev++)
+		pdata->devices[i] = ocp2scp_dev;
+
+	pdata->dev_cnt	= dev_cnt;
+
+	pdev = omap_device_build(name, bus_id, oh, pdata, sizeof(*pdata), NULL,
+								0, false);
+	if (IS_ERR(pdev)) {
+		pr_err("Could not build omap_device for %s %s\n",
+						name, oh_name);
+		kfree(pdata->devices);
+		kfree(pdata);
+		return;
+	}
+}
+#else
+static inline void omap_init_ocp2scp(void) { }
+#endif
+
 /*-------------------------------------------------------------------------*/
 
 static int __init omap2_init_devices(void)
@@ -640,6 +718,7 @@ static int __init omap2_init_devices(void)
 	omap_init_sham();
 	omap_init_aes();
 	omap_init_vout();
+	omap_init_ocp2scp();
 
 	return 0;
 }

arch/arm/mach-omap2/omap_hwmod.c

@@ -421,6 +421,38 @@ static int _set_softreset(struct omap_hwmod *oh, u32 *v)
 	return 0;
 }
 
+/**
+ * _wait_softreset_complete - wait for an OCP softreset to complete
+ * @oh: struct omap_hwmod * to wait on
+ *
+ * Wait until the IP block represented by @oh reports that its OCP
+ * softreset is complete.  This can be triggered by software (see
+ * _ocp_softreset()) or by hardware upon returning from off-mode (one
+ * example is HSMMC).  Waits for up to MAX_MODULE_SOFTRESET_WAIT
+ * microseconds.  Returns the number of microseconds waited.
+ */
+static int _wait_softreset_complete(struct omap_hwmod *oh)
+{
+	struct omap_hwmod_class_sysconfig *sysc;
+	u32 softrst_mask;
+	int c = 0;
+
+	sysc = oh->class->sysc;
+
+	if (sysc->sysc_flags & SYSS_HAS_RESET_STATUS)
+		omap_test_timeout((omap_hwmod_read(oh, sysc->syss_offs)
+				   & SYSS_RESETDONE_MASK),
+				  MAX_MODULE_SOFTRESET_WAIT, c);
+	else if (sysc->sysc_flags & SYSC_HAS_RESET_STATUS) {
+		softrst_mask = (0x1 << sysc->sysc_fields->srst_shift);
+		omap_test_timeout(!(omap_hwmod_read(oh, sysc->sysc_offs)
+				    & softrst_mask),
+				  MAX_MODULE_SOFTRESET_WAIT, c);
+	}
+
+	return c;
+}
+
 /**
  * _set_dmadisable: set OCP_SYSCONFIG.DMADISABLE bit in @v
  * @oh: struct omap_hwmod *
@@ -1282,6 +1314,18 @@ static void _enable_sysc(struct omap_hwmod *oh)
 	if (!oh->class->sysc)
 		return;
 
+	/*
+	 * Wait until reset has completed, this is needed as the IP
+	 * block is reset automatically by hardware in some cases
+	 * (off-mode for example), and the drivers require the
+	 * IP to be ready when they access it
+	 */
+	if (oh->flags & HWMOD_CONTROL_OPT_CLKS_IN_RESET)
+		_enable_optional_clocks(oh);
+	_wait_softreset_complete(oh);
+	if (oh->flags & HWMOD_CONTROL_OPT_CLKS_IN_RESET)
+		_disable_optional_clocks(oh);
+
 	v = oh->_sysc_cache;
 	sf = oh->class->sysc->sysc_flags;
 
@@ -1804,7 +1848,7 @@ static int _am33xx_disable_module(struct omap_hwmod *oh)
  */
 static int _ocp_softreset(struct omap_hwmod *oh)
 {
-	u32 v, softrst_mask;
+	u32 v;
 	int c = 0;
 	int ret = 0;
 
@@ -1834,19 +1878,7 @@ static int _ocp_softreset(struct omap_hwmod *oh)
 	if (oh->class->sysc->srst_udelay)
 		udelay(oh->class->sysc->srst_udelay);
 
-	if (oh->class->sysc->sysc_flags & SYSS_HAS_RESET_STATUS)
-		omap_test_timeout((omap_hwmod_read(oh,
-						    oh->class->sysc->syss_offs)
-				   & SYSS_RESETDONE_MASK),
-				  MAX_MODULE_SOFTRESET_WAIT, c);
-	else if (oh->class->sysc->sysc_flags & SYSC_HAS_RESET_STATUS) {
-		softrst_mask = (0x1 << oh->class->sysc->sysc_fields->srst_shift);
-		omap_test_timeout(!(omap_hwmod_read(oh,
-						     oh->class->sysc->sysc_offs)
-				   & softrst_mask),
-				  MAX_MODULE_SOFTRESET_WAIT, c);
-	}
-
+	c = _wait_softreset_complete(oh);
 	if (c == MAX_MODULE_SOFTRESET_WAIT)
 		pr_warning("omap_hwmod: %s: softreset failed (waited %d usec)\n",
 			   oh->name, MAX_MODULE_SOFTRESET_WAIT);
@@ -2352,6 +2384,9 @@ static int __init _setup_reset(struct omap_hwmod *oh)
 	if (oh->_state != _HWMOD_STATE_INITIALIZED)
 		return -EINVAL;
 
+	if (oh->flags & HWMOD_EXT_OPT_MAIN_CLK)
+		return -EPERM;
+
 	if (oh->rst_lines_cnt == 0) {
 		r = _enable(oh);
 		if (r) {

arch/arm/mach-omap2/omap_hwmod_44xx_data.c

@@ -21,6 +21,7 @@
 #include <linux/io.h>
 #include <linux/platform_data/gpio-omap.h>
 #include <linux/power/smartreflex.h>
+#include <linux/platform_data/omap_ocp2scp.h>
 
 #include <plat/omap_hwmod.h>
 #include <plat/i2c.h>
@@ -2125,6 +2126,14 @@ static struct omap_hwmod omap44xx_mcpdm_hwmod = {
 	.name		= "mcpdm",
 	.class		= &omap44xx_mcpdm_hwmod_class,
 	.clkdm_name	= "abe_clkdm",
+	/*
+	 * It's suspected that the McPDM requires an off-chip main
+	 * functional clock, controlled via I2C.  This IP block is
+	 * currently reset very early during boot, before I2C is
+	 * available, so it doesn't seem that we have any choice in
+	 * the kernel other than to avoid resetting it.
+	 */
+	.flags		= HWMOD_EXT_OPT_MAIN_CLK,
 	.mpu_irqs	= omap44xx_mcpdm_irqs,
 	.sdma_reqs	= omap44xx_mcpdm_sdma_reqs,
 	.main_clk	= "mcpdm_fck",
@@ -2681,6 +2690,32 @@ static struct omap_hwmod_class omap44xx_ocp2scp_hwmod_class = {
 	.sysc	= &omap44xx_ocp2scp_sysc,
 };
 
+/* ocp2scp dev_attr */
+static struct resource omap44xx_usb_phy_and_pll_addrs[] = {
+	{
+		.name		= "usb_phy",
+		.start		= 0x4a0ad080,
+		.end		= 0x4a0ae000,
+		.flags		= IORESOURCE_MEM,
+	},
+	{
+		/* XXX: Remove this once control module driver is in place */
+		.name		= "ctrl_dev",
+		.start		= 0x4a002300,
+		.end		= 0x4a002303,
+		.flags		= IORESOURCE_MEM,
+	},
+	{ }
+};
+
+static struct omap_ocp2scp_dev ocp2scp_dev_attr[] = {
+	{
+		.drv_name       = "omap-usb2",
+		.res		= omap44xx_usb_phy_and_pll_addrs,
+	},
+	{ }
+};
+
 /* ocp2scp_usb_phy */
 static struct omap_hwmod omap44xx_ocp2scp_usb_phy_hwmod = {
 	.name		= "ocp2scp_usb_phy",
@@ -2694,6 +2729,7 @@ static struct omap_hwmod omap44xx_ocp2scp_usb_phy_hwmod = {
 			.modulemode   = MODULEMODE_HWCTRL,
 		},
 	},
+	.dev_attr	= ocp2scp_dev_attr,
 };
 
 /*

arch/arm/mach-omap2/twl-common.c

@@ -73,6 +73,7 @@ void __init omap4_pmic_init(const char *pmic_type,
 {
 	/* PMIC part*/
 	omap_mux_init_signal("sys_nirq1", OMAP_PIN_INPUT_PULLUP | OMAP_PIN_OFF_WAKEUPENABLE);
+	omap_mux_init_signal("fref_clk0_out.sys_drm_msecure", OMAP_PIN_OUTPUT);
 	omap_pmic_init(1, 400, pmic_type, 7 + OMAP44XX_IRQ_GIC_START, pmic_data);
 
 	/* Register additional devices on i2c1 bus if needed */
@@ -366,7 +367,7 @@ static struct regulator_init_data omap4_clk32kg_idata = {
 };
 
 static struct regulator_consumer_supply omap4_vdd1_supply[] = {
-	REGULATOR_SUPPLY("vcc", "mpu.0"),
+	REGULATOR_SUPPLY("vcc", "cpu0"),
 };
 
 static struct regulator_consumer_supply omap4_vdd2_supply[] = {

arch/arm/mach-omap2/vc.c

@@ -264,7 +264,7 @@ static void __init omap_vc_i2c_init(struct voltagedomain *voltdm)
 
 	if (initialized) {
 		if (voltdm->pmic->i2c_high_speed != i2c_high_speed)
-			pr_warn("%s: I2C config for vdd_%s does not match other channels (%u).",
+			pr_warn("%s: I2C config for vdd_%s does not match other channels (%u).\n",
 				__func__, voltdm->name, i2c_high_speed);
 		return;
 	}

arch/arm/mach-pxa/hx4700.c

@@ -28,6 +28,7 @@
 #include <linux/mfd/asic3.h>
 #include <linux/mtd/physmap.h>
 #include <linux/pda_power.h>
+#include <linux/pwm.h>
 #include <linux/pwm_backlight.h>
 #include <linux/regulator/driver.h>
 #include <linux/regulator/gpio-regulator.h>
@@ -556,7 +557,7 @@ static struct platform_device hx4700_lcd = {
  */
 
 static struct platform_pwm_backlight_data backlight_data = {
-	.pwm_id         = 1,
+	.pwm_id         = -1,	/* Superseded by pwm_lookup */
 	.max_brightness = 200,
 	.dft_brightness = 100,
 	.pwm_period_ns  = 30923,
@@ -571,6 +572,10 @@ static struct platform_device backlight = {
 	},
 };
 
+static struct pwm_lookup hx4700_pwm_lookup[] = {
+	PWM_LOOKUP("pxa27x-pwm.1", 0, "pwm-backlight", NULL),
+};
+
 /*
  * USB "Transceiver"
  */
@@ -872,6 +877,7 @@ static void __init hx4700_init(void)
 	pxa_set_stuart_info(NULL);
 
 	platform_add_devices(devices, ARRAY_SIZE(devices));
+	pwm_add_table(hx4700_pwm_lookup, ARRAY_SIZE(hx4700_pwm_lookup));
 
 	pxa_set_ficp_info(&ficp_info);
 	pxa27x_set_i2c_power_info(NULL);

arch/arm/mach-pxa/spitz_pm.c

@@ -86,10 +86,7 @@ static void spitz_discharge1(int on)
 	gpio_set_value(SPITZ_GPIO_LED_GREEN, on);
 }
 
-static unsigned long gpio18_config[] = {
-	GPIO18_RDY,
-	GPIO18_GPIO,
-};
+static unsigned long gpio18_config = GPIO18_GPIO;
 
 static void spitz_presuspend(void)
 {
@@ -112,7 +109,7 @@ static void spitz_presuspend(void)
 	PGSR3 &= ~SPITZ_GPIO_G3_STROBE_BIT;
 	PGSR2 |= GPIO_bit(SPITZ_GPIO_KEY_STROBE0);
 
-	pxa2xx_mfp_config(&gpio18_config[0], 1);
+	pxa2xx_mfp_config(&gpio18_config, 1);
 	gpio_request_one(18, GPIOF_OUT_INIT_HIGH, "Unknown");
 	gpio_free(18);
 
@@ -131,7 +128,6 @@ static void spitz_presuspend(void)
 
 static void spitz_postsuspend(void)
 {
-	pxa2xx_mfp_config(&gpio18_config[1], 1);
 }
 
 static int spitz_should_wakeup(unsigned int resume_on_alarm)

arch/arm/mm/alignment.c

@@ -745,7 +745,7 @@ do_alignment_t32_to_handler(unsigned long *pinstr, struct pt_regs *regs,
 static int
 do_alignment(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
 {
-	union offset_union offset;
+	union offset_union uninitialized_var(offset);
 	unsigned long instr = 0, instrptr;
 	int (*handler)(unsigned long addr, unsigned long instr, struct pt_regs *regs);
 	unsigned int type;

arch/arm/mm/proc-v6.S

@@ -89,7 +89,7 @@ ENTRY(cpu_v6_dcache_clean_area)
 	mov	pc, lr
 
 /*
- *	cpu_arm926_switch_mm(pgd_phys, tsk)
+ *	cpu_v6_switch_mm(pgd_phys, tsk)
  *
  *	Set the translation table base pointer to be pgd_phys
  *

arch/arm/plat-omap/i2c.c

@@ -26,12 +26,14 @@
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
 #include <linux/i2c.h>
+#include <linux/i2c-omap.h>
 #include <linux/slab.h>
 #include <linux/err.h>
 #include <linux/clk.h>
 
 #include <mach/irqs.h>
 #include <plat/i2c.h>
+#include <plat/omap-pm.h>
 #include <plat/omap_device.h>
 
 #define OMAP_I2C_SIZE		0x3f
@@ -127,6 +129,16 @@ static inline int omap1_i2c_add_bus(int bus_id)
 
 
 #ifdef CONFIG_ARCH_OMAP2PLUS
+/*
+ * XXX This function is a temporary compatibility wrapper - only
+ * needed until the I2C driver can be converted to call
+ * omap_pm_set_max_dev_wakeup_lat() and handle a return code.
+ */
+static void omap_pm_set_max_mpu_wakeup_lat_compat(struct device *dev, long t)
+{
+	omap_pm_set_max_mpu_wakeup_lat(dev, t);
+}
+
 static inline int omap2_i2c_add_bus(int bus_id)
 {
 	int l;
@@ -158,6 +170,15 @@ static inline int omap2_i2c_add_bus(int bus_id)
 	dev_attr = (struct omap_i2c_dev_attr *)oh->dev_attr;
 	pdata->flags = dev_attr->flags;
 
+	/*
+	 * When waiting for completion of a i2c transfer, we need to
+	 * set a wake up latency constraint for the MPU. This is to
+	 * ensure quick enough wakeup from idle, when transfer
+	 * completes.
+	 * Only omap3 has support for constraints
+	 */
+	if (cpu_is_omap34xx())
+		pdata->set_mpu_wkup_lat = omap_pm_set_max_mpu_wakeup_lat_compat;
 	pdev = omap_device_build(name, bus_id, oh, pdata,
 			sizeof(struct omap_i2c_bus_platform_data),
 			NULL, 0, 0);

arch/arm/plat-omap/include/plat/omap_hwmod.h

@@ -443,6 +443,11 @@ struct omap_hwmod_omap4_prcm {
  *     in order to complete the reset. Optional clocks will be disabled
  *     again after the reset.
  * HWMOD_16BIT_REG: Module has 16bit registers
+ * HWMOD_EXT_OPT_MAIN_CLK: The only main functional clock source for
+ *     this IP block comes from an off-chip source and is not always
+ *     enabled.  This prevents the hwmod code from being able to
+ *     enable and reset the IP block early.  XXX Eventually it should
+ *     be possible to query the clock framework for this information.
  */
 #define HWMOD_SWSUP_SIDLE			(1 << 0)
 #define HWMOD_SWSUP_MSTANDBY			(1 << 1)
@@ -453,6 +458,7 @@ struct omap_hwmod_omap4_prcm {
 #define HWMOD_NO_IDLEST				(1 << 6)
 #define HWMOD_CONTROL_OPT_CLKS_IN_RESET		(1 << 7)
 #define HWMOD_16BIT_REG				(1 << 8)
+#define HWMOD_EXT_OPT_MAIN_CLK			(1 << 9)
 
 /*
  * omap_hwmod._int_flags definitions

arch/arm/plat-s3c24xx/dma.c

@@ -473,12 +473,13 @@ int s3c2410_dma_enqueue(enum dma_ch channel, void *id,
 		pr_debug("dma%d: %s: buffer %p queued onto non-empty channel\n",
 			 chan->number, __func__, buf);
 
-		if (chan->end == NULL)
+		if (chan->end == NULL) {
 			pr_debug("dma%d: %s: %p not empty, and chan->end==NULL?\n",
 				 chan->number, __func__, chan);
-
-		chan->end->next = buf;
-		chan->end = buf;
+		} else {
+			chan->end->next = buf;
+			chan->end = buf;
+		}
 	}
 
 	/* if necessary, update the next buffer field */

arch/arm/tools/Makefile

@@ -5,6 +5,6 @@
 #
 
 include/generated/mach-types.h: $(src)/gen-mach-types $(src)/mach-types
-	$(kecho) '  Generating $@'
+	@$(kecho) '  Generating $@'
 	@mkdir -p $(dir $@)
 	$(Q)$(AWK) -f $^ > $@ || { rm -f $@; /bin/false; }

arch/arm/vfp/vfpmodule.c

@@ -701,11 +701,14 @@ static int __init vfp_init(void)
 			elf_hwcap |= HWCAP_VFPv3;
 
 			/*
-			 * Check for VFPv3 D16. CPUs in this configuration
-			 * only have 16 x 64bit registers.
+			 * Check for VFPv3 D16 and VFPv4 D16.  CPUs in
+			 * this configuration only have 16 x 64bit
+			 * registers.
 			 */
 			if (((fmrx(MVFR0) & MVFR0_A_SIMD_MASK)) == 1)
-				elf_hwcap |= HWCAP_VFPv3D16;
+				elf_hwcap |= HWCAP_VFPv3D16; /* also v4-D16 */
+			else
+				elf_hwcap |= HWCAP_VFPD32;
 		}
 #endif
 		/*

arch/arm/xen/enlighten.c

@@ -166,3 +166,14 @@ void free_xenballooned_pages(int nr_pages, struct page **pages)
 	*pages = NULL;
 }
 EXPORT_SYMBOL_GPL(free_xenballooned_pages);
+
+/* In the hypervisor.S file. */
+EXPORT_SYMBOL_GPL(HYPERVISOR_event_channel_op);
+EXPORT_SYMBOL_GPL(HYPERVISOR_grant_table_op);
+EXPORT_SYMBOL_GPL(HYPERVISOR_xen_version);
+EXPORT_SYMBOL_GPL(HYPERVISOR_console_io);
+EXPORT_SYMBOL_GPL(HYPERVISOR_sched_op);
+EXPORT_SYMBOL_GPL(HYPERVISOR_hvm_op);
+EXPORT_SYMBOL_GPL(HYPERVISOR_memory_op);
+EXPORT_SYMBOL_GPL(HYPERVISOR_physdev_op);
+EXPORT_SYMBOL_GPL(privcmd_call);

arch/arm/xen/hypercall.S

@@ -48,20 +48,16 @@
 
 #include <linux/linkage.h>
 #include <asm/assembler.h>
+#include <asm/opcodes-virt.h>
 #include <xen/interface/xen.h>
 
 
-/* HVC 0xEA1 */
-#ifdef CONFIG_THUMB2_KERNEL
-#define xen_hvc .word 0xf7e08ea1
-#else
-#define xen_hvc .word 0xe140ea71
-#endif
+#define XEN_IMM 0xEA1
 
 #define HYPERCALL_SIMPLE(hypercall)		\
 ENTRY(HYPERVISOR_##hypercall)			\
 	mov r12, #__HYPERVISOR_##hypercall;	\
-	xen_hvc;							\
+	__HVC(XEN_IMM);						\
 	mov pc, lr;							\
 ENDPROC(HYPERVISOR_##hypercall)
 
@@ -76,7 +72,7 @@ ENTRY(HYPERVISOR_##hypercall)			\
 	stmdb sp!, {r4}						\
 	ldr r4, [sp, #4]					\
 	mov r12, #__HYPERVISOR_##hypercall;	\
-	xen_hvc								\
+	__HVC(XEN_IMM);						\
 	ldm sp!, {r4}						\
 	mov pc, lr							\
 ENDPROC(HYPERVISOR_##hypercall)
@@ -100,7 +96,7 @@ ENTRY(privcmd_call)
 	mov r2, r3
 	ldr r3, [sp, #8]
 	ldr r4, [sp, #4]
-	xen_hvc
+	__HVC(XEN_IMM)
 	ldm sp!, {r4}
 	mov pc, lr
 ENDPROC(privcmd_call);

arch/arm64/Kconfig

@@ -1,6 +1,7 @@
 config ARM64
 	def_bool y
 	select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE
+	select ARCH_WANT_COMPAT_IPC_PARSE_VERSION
 	select GENERIC_CLOCKEVENTS
 	select GENERIC_HARDIRQS_NO_DEPRECATED
 	select GENERIC_IOMAP

arch/arm64/include/asm/elf.h

@@ -25,12 +25,10 @@
 #include <asm/user.h>
 
 typedef unsigned long elf_greg_t;
-typedef unsigned long elf_freg_t[3];
 
 #define ELF_NGREG (sizeof (struct pt_regs) / sizeof(elf_greg_t))
 typedef elf_greg_t elf_gregset_t[ELF_NGREG];
-
-typedef struct user_fp elf_fpregset_t;
+typedef struct user_fpsimd_state elf_fpregset_t;
 
 #define EM_AARCH64		183
 
@@ -87,7 +85,6 @@ typedef struct user_fp elf_fpregset_t;
 #define R_AARCH64_MOVW_PREL_G2_NC	292
 #define R_AARCH64_MOVW_PREL_G3		293
 
-
 /*
  * These are used to set parameters in the core dumps.
  */

arch/arm64/include/asm/fpsimd.h

@@ -25,9 +25,8 @@
  *  - FPSR and FPCR
  *  - 32 128-bit data registers
  *
- * Note that user_fp forms a prefix of this structure, which is relied
- * upon in the ptrace FP/SIMD accessors. struct user_fpsimd_state must
- * form a prefix of struct fpsimd_state.
+ * Note that user_fpsimd forms a prefix of this structure, which is
+ * relied upon in the ptrace FP/SIMD accessors.
  */
 struct fpsimd_state {
 	union {

arch/arm64/include/asm/io.h

@@ -114,7 +114,7 @@ static inline u64 __raw_readq(const volatile void __iomem *addr)
  *  I/O port access primitives.
  */
 #define IO_SPACE_LIMIT		0xffff
-#define PCI_IOBASE		((void __iomem *)0xffffffbbfffe0000UL)
+#define PCI_IOBASE		((void __iomem *)(MODULES_VADDR - SZ_2M))
 
 static inline u8 inb(unsigned long addr)
 {
@@ -222,12 +222,12 @@ extern void __iomem *__ioremap(phys_addr_t phys_addr, size_t size, pgprot_t prot
 extern void __iounmap(volatile void __iomem *addr);
 
 #define PROT_DEFAULT		(PTE_TYPE_PAGE | PTE_AF | PTE_DIRTY)
-#define PROT_DEVICE_nGnRE	(PROT_DEFAULT | PTE_XN | PTE_ATTRINDX(MT_DEVICE_nGnRE))
+#define PROT_DEVICE_nGnRE	(PROT_DEFAULT | PTE_PXN | PTE_UXN | PTE_ATTRINDX(MT_DEVICE_nGnRE))
 #define PROT_NORMAL_NC		(PROT_DEFAULT | PTE_ATTRINDX(MT_NORMAL_NC))
 
-#define ioremap(addr, size)		__ioremap((addr), (size), PROT_DEVICE_nGnRE)
-#define ioremap_nocache(addr, size)	__ioremap((addr), (size), PROT_DEVICE_nGnRE)
-#define ioremap_wc(addr, size)		__ioremap((addr), (size), PROT_NORMAL_NC)
+#define ioremap(addr, size)		__ioremap((addr), (size), __pgprot(PROT_DEVICE_nGnRE))
+#define ioremap_nocache(addr, size)	__ioremap((addr), (size), __pgprot(PROT_DEVICE_nGnRE))
+#define ioremap_wc(addr, size)		__ioremap((addr), (size), __pgprot(PROT_NORMAL_NC))
 #define iounmap				__iounmap
 
 #define ARCH_HAS_IOREMAP_WC

arch/arm64/include/asm/pgtable-hwdef.h

@@ -38,7 +38,8 @@
 #define PMD_SECT_S		(_AT(pmdval_t, 3) << 8)
 #define PMD_SECT_AF		(_AT(pmdval_t, 1) << 10)
 #define PMD_SECT_NG		(_AT(pmdval_t, 1) << 11)
-#define PMD_SECT_XN		(_AT(pmdval_t, 1) << 54)
+#define PMD_SECT_PXN		(_AT(pmdval_t, 1) << 53)
+#define PMD_SECT_UXN		(_AT(pmdval_t, 1) << 54)
 
 /*
  * AttrIndx[2:0] encoding (mapping attributes defined in the MAIR* registers).
@@ -57,7 +58,8 @@
 #define PTE_SHARED		(_AT(pteval_t, 3) << 8)		/* SH[1:0], inner shareable */
 #define PTE_AF			(_AT(pteval_t, 1) << 10)	/* Access Flag */
 #define PTE_NG			(_AT(pteval_t, 1) << 11)	/* nG */
-#define PTE_XN			(_AT(pteval_t, 1) << 54)	/* XN */
+#define PTE_PXN			(_AT(pteval_t, 1) << 53)	/* Privileged XN */
+#define PTE_UXN			(_AT(pteval_t, 1) << 54)	/* User XN */
 
 /*
  * AttrIndx[2:0] encoding (mapping attributes defined in the MAIR* registers).

arch/arm64/include/asm/pgtable.h

@@ -62,23 +62,23 @@ extern pgprot_t pgprot_default;
 
 #define _MOD_PROT(p, b)	__pgprot(pgprot_val(p) | (b))
 
-#define PAGE_NONE		_MOD_PROT(pgprot_default, PTE_NG | PTE_XN | PTE_RDONLY)
-#define PAGE_SHARED		_MOD_PROT(pgprot_default, PTE_USER | PTE_NG | PTE_XN)
-#define PAGE_SHARED_EXEC	_MOD_PROT(pgprot_default, PTE_USER | PTE_NG)
-#define PAGE_COPY		_MOD_PROT(pgprot_default, PTE_USER | PTE_NG | PTE_XN | PTE_RDONLY)
-#define PAGE_COPY_EXEC		_MOD_PROT(pgprot_default, PTE_USER | PTE_NG | PTE_RDONLY)
-#define PAGE_READONLY		_MOD_PROT(pgprot_default, PTE_USER | PTE_NG | PTE_XN | PTE_RDONLY)
-#define PAGE_READONLY_EXEC	_MOD_PROT(pgprot_default, PTE_USER | PTE_NG | PTE_RDONLY)
-#define PAGE_KERNEL		_MOD_PROT(pgprot_default, PTE_XN | PTE_DIRTY)
-#define PAGE_KERNEL_EXEC	_MOD_PROT(pgprot_default, PTE_DIRTY)
-
-#define __PAGE_NONE		__pgprot(_PAGE_DEFAULT | PTE_NG | PTE_XN | PTE_RDONLY)
-#define __PAGE_SHARED		__pgprot(_PAGE_DEFAULT | PTE_USER | PTE_NG | PTE_XN)
-#define __PAGE_SHARED_EXEC	__pgprot(_PAGE_DEFAULT | PTE_USER | PTE_NG)
-#define __PAGE_COPY		__pgprot(_PAGE_DEFAULT | PTE_USER | PTE_NG | PTE_XN | PTE_RDONLY)
-#define __PAGE_COPY_EXEC	__pgprot(_PAGE_DEFAULT | PTE_USER | PTE_NG | PTE_RDONLY)
-#define __PAGE_READONLY		__pgprot(_PAGE_DEFAULT | PTE_USER | PTE_NG | PTE_XN | PTE_RDONLY)
-#define __PAGE_READONLY_EXEC	__pgprot(_PAGE_DEFAULT | PTE_USER | PTE_NG | PTE_RDONLY)
+#define PAGE_NONE		_MOD_PROT(pgprot_default, PTE_NG | PTE_PXN | PTE_UXN | PTE_RDONLY)
+#define PAGE_SHARED		_MOD_PROT(pgprot_default, PTE_USER | PTE_NG | PTE_PXN | PTE_UXN)
+#define PAGE_SHARED_EXEC	_MOD_PROT(pgprot_default, PTE_USER | PTE_NG | PTE_PXN)
+#define PAGE_COPY		_MOD_PROT(pgprot_default, PTE_USER | PTE_NG | PTE_PXN | PTE_UXN | PTE_RDONLY)
+#define PAGE_COPY_EXEC		_MOD_PROT(pgprot_default, PTE_USER | PTE_NG | PTE_PXN | PTE_RDONLY)
+#define PAGE_READONLY		_MOD_PROT(pgprot_default, PTE_USER | PTE_NG | PTE_PXN | PTE_UXN | PTE_RDONLY)
+#define PAGE_READONLY_EXEC	_MOD_PROT(pgprot_default, PTE_USER | PTE_NG | PTE_PXN | PTE_RDONLY)
+#define PAGE_KERNEL		_MOD_PROT(pgprot_default, PTE_PXN | PTE_UXN | PTE_DIRTY)
+#define PAGE_KERNEL_EXEC	_MOD_PROT(pgprot_default, PTE_UXN | PTE_DIRTY)
+
+#define __PAGE_NONE		__pgprot(_PAGE_DEFAULT | PTE_NG | PTE_PXN | PTE_UXN | PTE_RDONLY)
+#define __PAGE_SHARED		__pgprot(_PAGE_DEFAULT | PTE_USER | PTE_NG | PTE_PXN | PTE_UXN)
+#define __PAGE_SHARED_EXEC	__pgprot(_PAGE_DEFAULT | PTE_USER | PTE_NG | PTE_PXN)
+#define __PAGE_COPY		__pgprot(_PAGE_DEFAULT | PTE_USER | PTE_NG | PTE_PXN | PTE_UXN | PTE_RDONLY)
+#define __PAGE_COPY_EXEC	__pgprot(_PAGE_DEFAULT | PTE_USER | PTE_NG | PTE_PXN | PTE_RDONLY)
+#define __PAGE_READONLY		__pgprot(_PAGE_DEFAULT | PTE_USER | PTE_NG | PTE_PXN | PTE_UXN | PTE_RDONLY)
+#define __PAGE_READONLY_EXEC	__pgprot(_PAGE_DEFAULT | PTE_USER | PTE_NG | PTE_PXN | PTE_RDONLY)
 
 #endif /* __ASSEMBLY__ */
 
@@ -130,10 +130,10 @@ extern struct page *empty_zero_page;
 #define pte_young(pte)		(pte_val(pte) & PTE_AF)
 #define pte_special(pte)	(pte_val(pte) & PTE_SPECIAL)
 #define pte_write(pte)		(!(pte_val(pte) & PTE_RDONLY))
-#define pte_exec(pte)		(!(pte_val(pte) & PTE_XN))
+#define pte_exec(pte)		(!(pte_val(pte) & PTE_UXN))
 
 #define pte_present_exec_user(pte) \
-	((pte_val(pte) & (PTE_VALID | PTE_USER | PTE_XN)) == \
+	((pte_val(pte) & (PTE_VALID | PTE_USER | PTE_UXN)) == \
 	 (PTE_VALID | PTE_USER))
 
 #define PTE_BIT_FUNC(fn,op) \
@@ -262,7 +262,7 @@ static inline pmd_t *pmd_offset(pud_t *pud, unsigned long addr)
 
 static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
 {
-	const pteval_t mask = PTE_USER | PTE_XN | PTE_RDONLY;
+	const pteval_t mask = PTE_USER | PTE_PXN | PTE_UXN | PTE_RDONLY;
 	pte_val(pte) = (pte_val(pte) & ~mask) | (pgprot_val(newprot) & mask);
 	return pte;
 }

arch/arm64/include/asm/processor.h

@@ -43,6 +43,8 @@
 #else
 #define STACK_TOP		STACK_TOP_MAX
 #endif /* CONFIG_COMPAT */
+
+#define ARCH_LOW_ADDRESS_LIMIT	PHYS_MASK
 #endif /* __KERNEL__ */
 
 struct debug_info {

arch/arm64/include/asm/unistd.h

@@ -14,7 +14,6 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 #ifdef CONFIG_COMPAT
-#define __ARCH_WANT_COMPAT_IPC_PARSE_VERSION
 #define __ARCH_WANT_COMPAT_STAT64
 #define __ARCH_WANT_SYS_GETHOSTNAME
 #define __ARCH_WANT_SYS_PAUSE

arch/arm64/include/asm/unistd32.h

@@ -392,7 +392,7 @@ __SYSCALL(367, sys_fanotify_init)
 __SYSCALL(368, compat_sys_fanotify_mark_wrapper)
 __SYSCALL(369, sys_prlimit64)
 __SYSCALL(370, sys_name_to_handle_at)
-__SYSCALL(371, sys_open_by_handle_at)
+__SYSCALL(371, compat_sys_open_by_handle_at)
 __SYSCALL(372, sys_clock_adjtime)
 __SYSCALL(373, sys_syncfs)
 

arch/arm64/kernel/perf_event.c

@@ -613,17 +613,11 @@ enum armv8_pmuv3_perf_types {
 	ARMV8_PMUV3_PERFCTR_BUS_ACCESS				= 0x19,
 	ARMV8_PMUV3_PERFCTR_MEM_ERROR				= 0x1A,
 	ARMV8_PMUV3_PERFCTR_BUS_CYCLES				= 0x1D,
-
-	/*
-	 * This isn't an architected event.
-	 * We detect this event number and use the cycle counter instead.
-	 */
-	ARMV8_PMUV3_PERFCTR_CPU_CYCLES				= 0xFF,
 };
 
 /* PMUv3 HW events mapping. */
 static const unsigned armv8_pmuv3_perf_map[PERF_COUNT_HW_MAX] = {
-	[PERF_COUNT_HW_CPU_CYCLES]		= ARMV8_PMUV3_PERFCTR_CPU_CYCLES,
+	[PERF_COUNT_HW_CPU_CYCLES]		= ARMV8_PMUV3_PERFCTR_CLOCK_CYCLES,
 	[PERF_COUNT_HW_INSTRUCTIONS]		= ARMV8_PMUV3_PERFCTR_INSTR_EXECUTED,
 	[PERF_COUNT_HW_CACHE_REFERENCES]	= ARMV8_PMUV3_PERFCTR_L1_DCACHE_ACCESS,
 	[PERF_COUNT_HW_CACHE_MISSES]		= ARMV8_PMUV3_PERFCTR_L1_DCACHE_REFILL,
@@ -1106,7 +1100,7 @@ static int armv8pmu_get_event_idx(struct pmu_hw_events *cpuc,
 	unsigned long evtype = event->config_base & ARMV8_EVTYPE_EVENT;
 
 	/* Always place a cycle counter into the cycle counter. */
-	if (evtype == ARMV8_PMUV3_PERFCTR_CPU_CYCLES) {
+	if (evtype == ARMV8_PMUV3_PERFCTR_CLOCK_CYCLES) {
 		if (test_and_set_bit(ARMV8_IDX_CYCLE_COUNTER, cpuc->used_mask))
 			return -EAGAIN;
 

arch/arm64/kernel/process.c

@@ -309,24 +309,6 @@ struct task_struct *__switch_to(struct task_struct *prev,
 	return last;
 }
 
-/*
- * Fill in the task's elfregs structure for a core dump.
- */
-int dump_task_regs(struct task_struct *t, elf_gregset_t *elfregs)
-{
-	elf_core_copy_regs(elfregs, task_pt_regs(t));
-	return 1;
-}
-
-/*
- * fill in the fpe structure for a core dump...
- */
-int dump_fpu (struct pt_regs *regs, struct user_fp *fp)
-{
-	return 0;
-}
-EXPORT_SYMBOL(dump_fpu);
-
 /*
  * Shuffle the argument into the correct register before calling the
  * thread function.  x1 is the thread argument, x2 is the pointer to

arch/arm64/kernel/smp.c

@@ -211,8 +211,7 @@ asmlinkage void __cpuinit secondary_start_kernel(void)
 	 * before we continue.
 	 */
 	set_cpu_online(cpu, true);
-	while (!cpu_active(cpu))
-		cpu_relax();
+	complete(&cpu_running);
 
 	/*
 	 * OK, it's off to the idle thread for us

arch/arm64/mm/init.c

@@ -80,7 +80,7 @@ static void __init zone_sizes_init(unsigned long min, unsigned long max)
 #ifdef CONFIG_ZONE_DMA32
 	/* 4GB maximum for 32-bit only capable devices */
 	max_dma32 = min(max, MAX_DMA32_PFN);
-	zone_size[ZONE_DMA32] = max_dma32 - min;
+	zone_size[ZONE_DMA32] = max(min, max_dma32) - min;
 #endif
 	zone_size[ZONE_NORMAL] = max - max_dma32;
 

arch/c6x/include/asm/setup.h

@@ -0,0 +1,33 @@
+/*
+ *  Port on Texas Instruments TMS320C6x architecture
+ *
+ *  Copyright (C) 2004, 2009, 2010 2011 Texas Instruments Incorporated
+ *  Author: Aurelien Jacquiot (aurelien.jacquiot@jaluna.com)
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+#ifndef _ASM_C6X_SETUP_H
+#define _ASM_C6X_SETUP_H
+
+#include <uapi/asm/setup.h>
+
+#ifndef __ASSEMBLY__
+extern char c6x_command_line[COMMAND_LINE_SIZE];
+
+extern int c6x_add_memory(phys_addr_t start, unsigned long size);
+
+extern unsigned long ram_start;
+extern unsigned long ram_end;
+
+extern int c6x_num_cores;
+extern unsigned int c6x_silicon_rev;
+extern unsigned int c6x_devstat;
+extern unsigned char c6x_fuse_mac[6];
+
+extern void machine_init(unsigned long dt_ptr);
+extern void time_init(void);
+
+#endif /* !__ASSEMBLY__ */
+#endif /* _ASM_C6X_SETUP_H */

arch/c6x/include/uapi/asm/Kbuild

@@ -1,6 +1,8 @@
 # UAPI Header export list
 include include/uapi/asm-generic/Kbuild.asm
 
+generic-y += kvm_para.h
+
 header-y += byteorder.h
 header-y += kvm_para.h
 header-y += ptrace.h

arch/c6x/include/uapi/asm/kvm_para.h

@@ -1 +0,0 @@
-#include <asm-generic/kvm_para.h>

arch/c6x/include/uapi/asm/setup.h

@@ -1,33 +1,6 @@
-/*
- *  Port on Texas Instruments TMS320C6x architecture
- *
- *  Copyright (C) 2004, 2009, 2010 2011 Texas Instruments Incorporated
- *  Author: Aurelien Jacquiot (aurelien.jacquiot@jaluna.com)
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
-#ifndef _ASM_C6X_SETUP_H
-#define _ASM_C6X_SETUP_H
+#ifndef _UAPI_ASM_C6X_SETUP_H
+#define _UAPI_ASM_C6X_SETUP_H
 
 #define COMMAND_LINE_SIZE   1024
 
-#ifndef __ASSEMBLY__
-extern char c6x_command_line[COMMAND_LINE_SIZE];
-
-extern int c6x_add_memory(phys_addr_t start, unsigned long size);
-
-extern unsigned long ram_start;
-extern unsigned long ram_end;
-
-extern int c6x_num_cores;
-extern unsigned int c6x_silicon_rev;
-extern unsigned int c6x_devstat;
-extern unsigned char c6x_fuse_mac[6];
-
-extern void machine_init(unsigned long dt_ptr);
-extern void time_init(void);
-
-#endif /* !__ASSEMBLY__ */
-#endif /* _ASM_C6X_SETUP_H */
+#endif /* _UAPI_ASM_C6X_SETUP_H */

arch/c6x/kernel/entry.S

@@ -277,6 +277,8 @@ work_rescheduled:
  [A1]	BNOP	.S1	work_resched,5
 
 work_notifysig:
+	;; enable interrupts for do_notify_resume()
+	UNMASK_INT B2
 	B	.S2	do_notify_resume
 	LDW	.D2T1	*+SP(REGS__END+8),A6 ; syscall flag
 	ADDKPC	.S2	resume_userspace,B3,1
@@ -427,8 +429,7 @@ ENTRY(ret_from_kernel_execve)
 ENDPROC(ret_from_kernel_execve)
 
 	;;
-	;; These are the interrupt handlers, responsible for calling __do_IRQ()
-	;; int6 is used for syscalls (see _system_call entry)
+	;; These are the interrupt handlers, responsible for calling c6x_do_IRQ()
 	;;
 	.macro SAVE_ALL_INT
 	SAVE_ALL IRP,ITSR

arch/frv/Kconfig

@@ -13,6 +13,7 @@ config FRV
 	select GENERIC_CPU_DEVICES
 	select ARCH_WANT_IPC_PARSE_VERSION
 	select GENERIC_KERNEL_THREAD
+	select GENERIC_KERNEL_EXECVE
 
 config ZONE_DMA
 	bool

arch/frv/boot/Makefile

@@ -17,6 +17,8 @@ PARAMS_PHYS	 = 0x0207c000
 INITRD_PHYS	 = 0x02180000
 INITRD_VIRT	 = 0x02180000
 
+OBJCOPYFLAGS	:=-O binary -R .note -R .note.gnu.build-id -R .comment
+
 #
 # If you don't define ZRELADDR above,
 # then it defaults to ZTEXTADDR
@@ -32,18 +34,18 @@ Image: $(obj)/Image
 targets: $(obj)/Image
 
 $(obj)/Image: vmlinux FORCE
-	$(OBJCOPY) -O binary -R .note -R .comment -S vmlinux $@
+	$(OBJCOPY) $(OBJCOPYFLAGS) -S vmlinux $@
 
 #$(obj)/Image:	$(CONFIGURE) $(SYSTEM)
-#	$(OBJCOPY) -O binary -R .note -R .comment -g -S $(SYSTEM) $@
+#	$(OBJCOPY) $(OBJCOPYFLAGS) -g -S $(SYSTEM) $@
 
 bzImage: zImage
 
 zImage:	$(CONFIGURE) compressed/$(LINUX)
-	$(OBJCOPY) -O binary -R .note -R .comment -S compressed/$(LINUX) $@
+	$(OBJCOPY) $(OBJCOPYFLAGS) -S compressed/$(LINUX) $@
 
 bootpImage: bootp/bootp
-	$(OBJCOPY) -O binary -R .note -R .comment -S bootp/bootp $@
+	$(OBJCOPY) $(OBJCOPYFLAGS) -S bootp/bootp $@
 
 compressed/$(LINUX): $(LINUX) dep
 	@$(MAKE) -C compressed $(LINUX)

arch/frv/include/asm/unistd.h

@@ -30,7 +30,6 @@
 #define __ARCH_WANT_SYS_RT_SIGACTION
 #define __ARCH_WANT_SYS_RT_SIGSUSPEND
 #define __ARCH_WANT_SYS_EXECVE
-#define __ARCH_WANT_KERNEL_EXECVE
 
 /*
  * "Conditional" syscalls

arch/frv/kernel/entry.S

@@ -869,11 +869,6 @@ ret_from_kernel_thread:
 	call		schedule_tail
 	calll.p		@(gr21,gr0)
 	or		gr20,gr20,gr8
-	bra		sys_exit
-
-	.globl		ret_from_kernel_execve
-ret_from_kernel_execve:
-	ori		gr28,0,sp
 	bra		__syscall_exit
 
 ###################################################################################################
@@ -1080,27 +1075,10 @@ __entry_return_from_kernel_interrupt:
 	subicc		gr5,#0,gr0,icc0
 	beq		icc0,#0,__entry_return_direct
 
-__entry_preempt_need_resched:
-	ldi		@(gr15,#TI_FLAGS),gr4
-	andicc		gr4,#_TIF_NEED_RESCHED,gr0,icc0
-	beq		icc0,#1,__entry_return_direct
-
-	setlos		#PREEMPT_ACTIVE,gr5
-	sti		gr5,@(gr15,#TI_FLAGS)
-
-	andi		gr23,#~PSR_PIL,gr23
-	movgs		gr23,psr
-
-	call		schedule
-	sti		gr0,@(gr15,#TI_PRE_COUNT)
-
-	movsg		psr,gr23
-	ori		gr23,#PSR_PIL_14,gr23
-	movgs		gr23,psr
-	bra		__entry_preempt_need_resched
-#else
-	bra		__entry_return_direct
+	subcc		gr0,gr0,gr0,icc2		/* set Z and clear C */
+	call		preempt_schedule_irq
 #endif
+	bra		__entry_return_direct
 
 
 ###############################################################################

arch/frv/kernel/process.c

@@ -181,6 +181,9 @@ int copy_thread(unsigned long clone_flags,
 	childregs = (struct pt_regs *)
 		(task_stack_page(p) + THREAD_SIZE - FRV_FRAME0_SIZE);
 
+	/* set up the userspace frame (the only place that the USP is stored) */
+	*childregs = *__kernel_frame0_ptr;
+
 	p->set_child_tid = p->clear_child_tid = NULL;
 
 	p->thread.frame	 = childregs;
@@ -191,10 +194,8 @@ int copy_thread(unsigned long clone_flags,
 	p->thread.frame0 = childregs;
 
 	if (unlikely(!regs)) {
-		memset(childregs, 0, sizeof(struct pt_regs));
 		childregs->gr9 = usp; /* function */
 		childregs->gr8 = arg;
-		childregs->psr = PSR_S;
 		p->thread.pc = (unsigned long) ret_from_kernel_thread;
 		save_user_regs(p->thread.user);
 		return 0;

arch/frv/mb93090-mb00/pci-dma-nommu.c

@@ -11,6 +11,7 @@
 
 #include <linux/types.h>
 #include <linux/slab.h>
+#include <linux/export.h>
 #include <linux/dma-mapping.h>
 #include <linux/list.h>
 #include <linux/pci.h>

arch/h8300/include/asm/cache.h

@@ -2,7 +2,8 @@
 #define __ARCH_H8300_CACHE_H
 
 /* bytes per L1 cache line */
-#define        L1_CACHE_BYTES  4
+#define        L1_CACHE_SHIFT  2
+#define        L1_CACHE_BYTES  (1 << L1_CACHE_SHIFT)
 
 /* m68k-elf-gcc  2.95.2 doesn't like these */
 

arch/ia64/mm/init.c

@@ -637,7 +637,6 @@ mem_init (void)
 
 	high_memory = __va(max_low_pfn * PAGE_SIZE);
 
-	reset_zone_present_pages();
 	for_each_online_pgdat(pgdat)
 		if (pgdat->bdata->node_bootmem_map)
 			totalram_pages += free_all_bootmem_node(pgdat);

arch/m68k/include/asm/signal.h

@@ -41,7 +41,7 @@ struct k_sigaction {
 static inline void sigaddset(sigset_t *set, int _sig)
 {
 	asm ("bfset %0{%1,#1}"
-		: "+od" (*set)
+		: "+o" (*set)
 		: "id" ((_sig - 1) ^ 31)
 		: "cc");
 }
@@ -49,7 +49,7 @@ static inline void sigaddset(sigset_t *set, int _sig)
 static inline void sigdelset(sigset_t *set, int _sig)
 {
 	asm ("bfclr %0{%1,#1}"
-		: "+od" (*set)
+		: "+o" (*set)
 		: "id" ((_sig - 1) ^ 31)
 		: "cc");
 }
@@ -65,7 +65,7 @@ static inline int __gen_sigismember(sigset_t *set, int _sig)
 	int ret;
 	asm ("bfextu %1{%2,#1},%0"
 		: "=d" (ret)
-		: "od" (*set), "id" ((_sig-1) ^ 31)
+		: "o" (*set), "id" ((_sig-1) ^ 31)
 		: "cc");
 	return ret;
 }

arch/microblaze/kernel/signal.c

@@ -111,7 +111,7 @@ asmlinkage long sys_rt_sigreturn(struct pt_regs *regs)
 
 	/* It is more difficult to avoid calling this function than to
 	 call it and ignore errors. */
-	if (do_sigaltstack(&frame->uc.uc_stack, NULL, regs->r1))
+	if (do_sigaltstack(&frame->uc.uc_stack, NULL, regs->r1) == -EFAULT)
 		goto badframe;
 
 	return rval;

arch/mips/cavium-octeon/executive/cvmx-l2c.c

@@ -30,6 +30,7 @@
  * measurement, and debugging facilities.
  */
 
+#include <linux/irqflags.h>
 #include <asm/octeon/cvmx.h>
 #include <asm/octeon/cvmx-l2c.h>
 #include <asm/octeon/cvmx-spinlock.h>

arch/mips/fw/arc/misc.c

@@ -11,6 +11,7 @@
  */
 #include <linux/init.h>
 #include <linux/kernel.h>
+#include <linux/irqflags.h>
 
 #include <asm/bcache.h>
 

arch/mips/include/asm/bitops.h

@@ -14,7 +14,6 @@
 #endif
 
 #include <linux/compiler.h>
-#include <linux/irqflags.h>
 #include <linux/types.h>
 #include <asm/barrier.h>
 #include <asm/byteorder.h>		/* sigh ... */
@@ -44,6 +43,24 @@
 #define smp_mb__before_clear_bit()	smp_mb__before_llsc()
 #define smp_mb__after_clear_bit()	smp_llsc_mb()
 
+
+/*
+ * These are the "slower" versions of the functions and are in bitops.c.
+ * These functions call raw_local_irq_{save,restore}().
+ */
+void __mips_set_bit(unsigned long nr, volatile unsigned long *addr);
+void __mips_clear_bit(unsigned long nr, volatile unsigned long *addr);
+void __mips_change_bit(unsigned long nr, volatile unsigned long *addr);
+int __mips_test_and_set_bit(unsigned long nr,
+			    volatile unsigned long *addr);
+int __mips_test_and_set_bit_lock(unsigned long nr,
+				 volatile unsigned long *addr);
+int __mips_test_and_clear_bit(unsigned long nr,
+			      volatile unsigned long *addr);
+int __mips_test_and_change_bit(unsigned long nr,
+			       volatile unsigned long *addr);
+
+
 /*
  * set_bit - Atomically set a bit in memory
  * @nr: the bit to set
@@ -57,7 +74,7 @@
 static inline void set_bit(unsigned long nr, volatile unsigned long *addr)
 {
 	unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG);
-	unsigned short bit = nr & SZLONG_MASK;
+	int bit = nr & SZLONG_MASK;
 	unsigned long temp;
 
 	if (kernel_uses_llsc && R10000_LLSC_WAR) {
@@ -92,17 +109,8 @@ static inline void set_bit(unsigned long nr, volatile unsigned long *addr)
 			: "=&r" (temp), "+m" (*m)
 			: "ir" (1UL << bit));
 		} while (unlikely(!temp));
-	} else {
-		volatile unsigned long *a = addr;
-		unsigned long mask;
-		unsigned long flags;
-
-		a += nr >> SZLONG_LOG;
-		mask = 1UL << bit;
-		raw_local_irq_save(flags);
-		*a |= mask;
-		raw_local_irq_restore(flags);
-	}
+	} else
+		__mips_set_bit(nr, addr);
 }
 
 /*
@@ -118,7 +126,7 @@ static inline void set_bit(unsigned long nr, volatile unsigned long *addr)
 static inline void clear_bit(unsigned long nr, volatile unsigned long *addr)
 {
 	unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG);
-	unsigned short bit = nr & SZLONG_MASK;
+	int bit = nr & SZLONG_MASK;
 	unsigned long temp;
 
 	if (kernel_uses_llsc && R10000_LLSC_WAR) {
@@ -153,17 +161,8 @@ static inline void clear_bit(unsigned long nr, volatile unsigned long *addr)
 			: "=&r" (temp), "+m" (*m)
 			: "ir" (~(1UL << bit)));
 		} while (unlikely(!temp));
-	} else {
-		volatile unsigned long *a = addr;
-		unsigned long mask;
-		unsigned long flags;
-
-		a += nr >> SZLONG_LOG;
-		mask = 1UL << bit;
-		raw_local_irq_save(flags);
-		*a &= ~mask;
-		raw_local_irq_restore(flags);
-	}
+	} else
+		__mips_clear_bit(nr, addr);
 }
 
 /*
@@ -191,7 +190,7 @@ static inline void clear_bit_unlock(unsigned long nr, volatile unsigned long *ad
  */
 static inline void change_bit(unsigned long nr, volatile unsigned long *addr)
 {
-	unsigned short bit = nr & SZLONG_MASK;
+	int bit = nr & SZLONG_MASK;
 
 	if (kernel_uses_llsc && R10000_LLSC_WAR) {
 		unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG);
@@ -220,17 +219,8 @@ static inline void change_bit(unsigned long nr, volatile unsigned long *addr)
 			: "=&r" (temp), "+m" (*m)
 			: "ir" (1UL << bit));
 		} while (unlikely(!temp));
-	} else {
-		volatile unsigned long *a = addr;
-		unsigned long mask;
-		unsigned long flags;
-
-		a += nr >> SZLONG_LOG;
-		mask = 1UL << bit;
-		raw_local_irq_save(flags);
-		*a ^= mask;
-		raw_local_irq_restore(flags);
-	}
+	} else
+		__mips_change_bit(nr, addr);
 }
 
 /*
@@ -244,7 +234,7 @@ static inline void change_bit(unsigned long nr, volatile unsigned long *addr)
 static inline int test_and_set_bit(unsigned long nr,
 	volatile unsigned long *addr)
 {
-	unsigned short bit = nr & SZLONG_MASK;
+	int bit = nr & SZLONG_MASK;
 	unsigned long res;
 
 	smp_mb__before_llsc();
@@ -281,18 +271,8 @@ static inline int test_and_set_bit(unsigned long nr,
 		} while (unlikely(!res));
 
 		res = temp & (1UL << bit);
-	} else {
-		volatile unsigned long *a = addr;
-		unsigned long mask;
-		unsigned long flags;
-
-		a += nr >> SZLONG_LOG;
-		mask = 1UL << bit;
-		raw_local_irq_save(flags);
-		res = (mask & *a);
-		*a |= mask;
-		raw_local_irq_restore(flags);
-	}
+	} else
+		res = __mips_test_and_set_bit(nr, addr);
 
 	smp_llsc_mb();
 
@@ -310,7 +290,7 @@ static inline int test_and_set_bit(unsigned long nr,
 static inline int test_and_set_bit_lock(unsigned long nr,
 	volatile unsigned long *addr)
 {
-	unsigned short bit = nr & SZLONG_MASK;
+	int bit = nr & SZLONG_MASK;
 	unsigned long res;
 
 	if (kernel_uses_llsc && R10000_LLSC_WAR) {
@@ -345,18 +325,8 @@ static inline int test_and_set_bit_lock(unsigned long nr,
 		} while (unlikely(!res));
 
 		res = temp & (1UL << bit);
-	} else {
-		volatile unsigned long *a = addr;
-		unsigned long mask;
-		unsigned long flags;
-
-		a += nr >> SZLONG_LOG;
-		mask = 1UL << bit;
-		raw_local_irq_save(flags);
-		res = (mask & *a);
-		*a |= mask;
-		raw_local_irq_restore(flags);
-	}
+	} else
+		res = __mips_test_and_set_bit_lock(nr, addr);
 
 	smp_llsc_mb();
 
@@ -373,7 +343,7 @@ static inline int test_and_set_bit_lock(unsigned long nr,
 static inline int test_and_clear_bit(unsigned long nr,
 	volatile unsigned long *addr)
 {
-	unsigned short bit = nr & SZLONG_MASK;
+	int bit = nr & SZLONG_MASK;
 	unsigned long res;
 
 	smp_mb__before_llsc();
@@ -428,18 +398,8 @@ static inline int test_and_clear_bit(unsigned long nr,
 		} while (unlikely(!res));
 
 		res = temp & (1UL << bit);
-	} else {
-		volatile unsigned long *a = addr;
-		unsigned long mask;
-		unsigned long flags;
-
-		a += nr >> SZLONG_LOG;
-		mask = 1UL << bit;
-		raw_local_irq_save(flags);
-		res = (mask & *a);
-		*a &= ~mask;
-		raw_local_irq_restore(flags);
-	}
+	} else
+		res = __mips_test_and_clear_bit(nr, addr);
 
 	smp_llsc_mb();
 
@@ -457,7 +417,7 @@ static inline int test_and_clear_bit(unsigned long nr,
 static inline int test_and_change_bit(unsigned long nr,
 	volatile unsigned long *addr)
 {
-	unsigned short bit = nr & SZLONG_MASK;
+	int bit = nr & SZLONG_MASK;
 	unsigned long res;
 
 	smp_mb__before_llsc();
@@ -494,18 +454,8 @@ static inline int test_and_change_bit(unsigned long nr,
 		} while (unlikely(!res));
 
 		res = temp & (1UL << bit);
-	} else {
-		volatile unsigned long *a = addr;
-		unsigned long mask;
-		unsigned long flags;
-
-		a += nr >> SZLONG_LOG;
-		mask = 1UL << bit;
-		raw_local_irq_save(flags);
-		res = (mask & *a);
-		*a ^= mask;
-		raw_local_irq_restore(flags);
-	}
+	} else
+		res = __mips_test_and_change_bit(nr, addr);
 
 	smp_llsc_mb();
 

arch/mips/include/asm/compat.h

@@ -290,7 +290,7 @@ struct compat_shmid64_ds {
 
 static inline int is_compat_task(void)
 {
-	return test_thread_flag(TIF_32BIT);
+	return test_thread_flag(TIF_32BIT_ADDR);
 }
 
 #endif /* _ASM_COMPAT_H */

arch/mips/include/asm/io.h

@@ -15,6 +15,7 @@
 #include <linux/compiler.h>
 #include <linux/kernel.h>
 #include <linux/types.h>
+#include <linux/irqflags.h>
 
 #include <asm/addrspace.h>
 #include <asm/bug.h>

arch/mips/include/asm/irqflags.h

@@ -16,83 +16,13 @@
 #include <linux/compiler.h>
 #include <asm/hazards.h>
 
-__asm__(
-	"	.macro	arch_local_irq_enable				\n"
-	"	.set	push						\n"
-	"	.set	reorder						\n"
-	"	.set	noat						\n"
-#ifdef CONFIG_MIPS_MT_SMTC
-	"	mfc0	$1, $2, 1	# SMTC - clear TCStatus.IXMT	\n"
-	"	ori	$1, 0x400					\n"
-	"	xori	$1, 0x400					\n"
-	"	mtc0	$1, $2, 1					\n"
-#elif defined(CONFIG_CPU_MIPSR2)
-	"	ei							\n"
-#else
-	"	mfc0	$1,$12						\n"
-	"	ori	$1,0x1f						\n"
-	"	xori	$1,0x1e						\n"
-	"	mtc0	$1,$12						\n"
-#endif
-	"	irq_enable_hazard					\n"
-	"	.set	pop						\n"
-	"	.endm");
+#if defined(CONFIG_CPU_MIPSR2) && !defined(CONFIG_MIPS_MT_SMTC)
 
-extern void smtc_ipi_replay(void);
-
-static inline void arch_local_irq_enable(void)
-{
-#ifdef CONFIG_MIPS_MT_SMTC
-	/*
-	 * SMTC kernel needs to do a software replay of queued
-	 * IPIs, at the cost of call overhead on each local_irq_enable()
-	 */
-	smtc_ipi_replay();
-#endif
-	__asm__ __volatile__(
-		"arch_local_irq_enable"
-		: /* no outputs */
-		: /* no inputs */
-		: "memory");
-}
-
-
-/*
- * For cli() we have to insert nops to make sure that the new value
- * has actually arrived in the status register before the end of this
- * macro.
- * R4000/R4400 need three nops, the R4600 two nops and the R10000 needs
- * no nops at all.
- */
-/*
- * For TX49, operating only IE bit is not enough.
- *
- * If mfc0 $12 follows store and the mfc0 is last instruction of a
- * page and fetching the next instruction causes TLB miss, the result
- * of the mfc0 might wrongly contain EXL bit.
- *
- * ERT-TX49H2-027, ERT-TX49H3-012, ERT-TX49HL3-006, ERT-TX49H4-008
- *
- * Workaround: mask EXL bit of the result or place a nop before mfc0.
- */
 __asm__(
 	"	.macro	arch_local_irq_disable\n"
 	"	.set	push						\n"
 	"	.set	noat						\n"
-#ifdef CONFIG_MIPS_MT_SMTC
-	"	mfc0	$1, $2, 1					\n"
-	"	ori	$1, 0x400					\n"
-	"	.set	noreorder					\n"
-	"	mtc0	$1, $2, 1					\n"
-#elif defined(CONFIG_CPU_MIPSR2)
 	"	di							\n"
-#else
-	"	mfc0	$1,$12						\n"
-	"	ori	$1,0x1f						\n"
-	"	xori	$1,0x1f						\n"
-	"	.set	noreorder					\n"
-	"	mtc0	$1,$12						\n"
-#endif
 	"	irq_disable_hazard					\n"
 	"	.set	pop						\n"
 	"	.endm							\n");
@@ -106,46 +36,14 @@ static inline void arch_local_irq_disable(void)
 		: "memory");
 }
 
-__asm__(
-	"	.macro	arch_local_save_flags flags			\n"
-	"	.set	push						\n"
-	"	.set	reorder						\n"
-#ifdef CONFIG_MIPS_MT_SMTC
-	"	mfc0	\\flags, $2, 1					\n"
-#else
-	"	mfc0	\\flags, $12					\n"
-#endif
-	"	.set	pop						\n"
-	"	.endm							\n");
-
-static inline unsigned long arch_local_save_flags(void)
-{
-	unsigned long flags;
-	asm volatile("arch_local_save_flags %0" : "=r" (flags));
-	return flags;
-}
 
 __asm__(
 	"	.macro	arch_local_irq_save result			\n"
 	"	.set	push						\n"
 	"	.set	reorder						\n"
 	"	.set	noat						\n"
-#ifdef CONFIG_MIPS_MT_SMTC
-	"	mfc0	\\result, $2, 1					\n"
-	"	ori	$1, \\result, 0x400				\n"
-	"	.set	noreorder					\n"
-	"	mtc0	$1, $2, 1					\n"
-	"	andi	\\result, \\result, 0x400			\n"
-#elif defined(CONFIG_CPU_MIPSR2)
 	"	di	\\result					\n"
 	"	andi	\\result, 1					\n"
-#else
-	"	mfc0	\\result, $12					\n"
-	"	ori	$1, \\result, 0x1f				\n"
-	"	xori	$1, 0x1f					\n"
-	"	.set	noreorder					\n"
-	"	mtc0	$1, $12						\n"
-#endif
 	"	irq_disable_hazard					\n"
 	"	.set	pop						\n"
 	"	.endm							\n");
@@ -160,61 +58,37 @@ static inline unsigned long arch_local_irq_save(void)
 	return flags;
 }
 
+
 __asm__(
 	"	.macro	arch_local_irq_restore flags			\n"
 	"	.set	push						\n"
 	"	.set	noreorder					\n"
 	"	.set	noat						\n"
-#ifdef CONFIG_MIPS_MT_SMTC
-	"mfc0	$1, $2, 1						\n"
-	"andi	\\flags, 0x400						\n"
-	"ori	$1, 0x400						\n"
-	"xori	$1, 0x400						\n"
-	"or	\\flags, $1						\n"
-	"mtc0	\\flags, $2, 1						\n"
-#elif defined(CONFIG_CPU_MIPSR2) && defined(CONFIG_IRQ_CPU)
+#if defined(CONFIG_IRQ_CPU)
 	/*
 	 * Slow, but doesn't suffer from a relatively unlikely race
 	 * condition we're having since days 1.
 	 */
 	"	beqz	\\flags, 1f					\n"
-	"	 di							\n"
+	"	di							\n"
 	"	ei							\n"
 	"1:								\n"
-#elif defined(CONFIG_CPU_MIPSR2)
+#else
 	/*
 	 * Fast, dangerous.  Life is fun, life is good.
 	 */
 	"	mfc0	$1, $12						\n"
 	"	ins	$1, \\flags, 0, 1				\n"
 	"	mtc0	$1, $12						\n"
-#else
-	"	mfc0	$1, $12						\n"
-	"	andi	\\flags, 1					\n"
-	"	ori	$1, 0x1f					\n"
-	"	xori	$1, 0x1f					\n"
-	"	or	\\flags, $1					\n"
-	"	mtc0	\\flags, $12					\n"
 #endif
 	"	irq_disable_hazard					\n"
 	"	.set	pop						\n"
 	"	.endm							\n");
 
-
 static inline void arch_local_irq_restore(unsigned long flags)
 {
 	unsigned long __tmp1;
 
-#ifdef CONFIG_MIPS_MT_SMTC
-	/*
-	 * SMTC kernel needs to do a software replay of queued
-	 * IPIs, at the cost of branch and call overhead on each
-	 * local_irq_restore()
-	 */
-	if (unlikely(!(flags & 0x0400)))
-		smtc_ipi_replay();
-#endif
-
 	__asm__ __volatile__(
 		"arch_local_irq_restore\t%0"
 		: "=r" (__tmp1)
@@ -232,6 +106,75 @@ static inline void __arch_local_irq_restore(unsigned long flags)
 		: "0" (flags)
 		: "memory");
 }
+#else
+/* Functions that require preempt_{dis,en}able() are in mips-atomic.c */
+void arch_local_irq_disable(void);
+unsigned long arch_local_irq_save(void);
+void arch_local_irq_restore(unsigned long flags);
+void __arch_local_irq_restore(unsigned long flags);
+#endif /* if defined(CONFIG_CPU_MIPSR2) && !defined(CONFIG_MIPS_MT_SMTC) */
+
+
+__asm__(
+	"	.macro	arch_local_irq_enable				\n"
+	"	.set	push						\n"
+	"	.set	reorder						\n"
+	"	.set	noat						\n"
+#ifdef CONFIG_MIPS_MT_SMTC
+	"	mfc0	$1, $2, 1	# SMTC - clear TCStatus.IXMT	\n"
+	"	ori	$1, 0x400					\n"
+	"	xori	$1, 0x400					\n"
+	"	mtc0	$1, $2, 1					\n"
+#elif defined(CONFIG_CPU_MIPSR2)
+	"	ei							\n"
+#else
+	"	mfc0	$1,$12						\n"
+	"	ori	$1,0x1f						\n"
+	"	xori	$1,0x1e						\n"
+	"	mtc0	$1,$12						\n"
+#endif
+	"	irq_enable_hazard					\n"
+	"	.set	pop						\n"
+	"	.endm");
+
+extern void smtc_ipi_replay(void);
+
+static inline void arch_local_irq_enable(void)
+{
+#ifdef CONFIG_MIPS_MT_SMTC
+	/*
+	 * SMTC kernel needs to do a software replay of queued
+	 * IPIs, at the cost of call overhead on each local_irq_enable()
+	 */
+	smtc_ipi_replay();
+#endif
+	__asm__ __volatile__(
+		"arch_local_irq_enable"
+		: /* no outputs */
+		: /* no inputs */
+		: "memory");
+}
+
+
+__asm__(
+	"	.macro	arch_local_save_flags flags			\n"
+	"	.set	push						\n"
+	"	.set	reorder						\n"
+#ifdef CONFIG_MIPS_MT_SMTC
+	"	mfc0	\\flags, $2, 1					\n"
+#else
+	"	mfc0	\\flags, $12					\n"
+#endif
+	"	.set	pop						\n"
+	"	.endm							\n");
+
+static inline unsigned long arch_local_save_flags(void)
+{
+	unsigned long flags;
+	asm volatile("arch_local_save_flags %0" : "=r" (flags));
+	return flags;
+}
+
 
 static inline int arch_irqs_disabled_flags(unsigned long flags)
 {
@@ -245,7 +188,7 @@ static inline int arch_irqs_disabled_flags(unsigned long flags)
 #endif
 }
 
-#endif
+#endif /* #ifndef __ASSEMBLY__ */
 
 /*
  * Do the CPU's IRQ-state tracing from assembly code.

arch/mips/include/asm/thread_info.h

@@ -112,12 +112,6 @@ register struct thread_info *__current_thread_info __asm__("$28");
 #define TIF_LOAD_WATCH		25	/* If set, load watch registers */
 #define TIF_SYSCALL_TRACE	31	/* syscall trace active */
 
-#ifdef CONFIG_MIPS32_O32
-#define TIF_32BIT TIF_32BIT_REGS
-#elif defined(CONFIG_MIPS32_N32)
-#define TIF_32BIT _TIF_32BIT_ADDR
-#endif /* CONFIG_MIPS32_O32 */
-
 #define _TIF_SYSCALL_TRACE	(1<<TIF_SYSCALL_TRACE)
 #define _TIF_SIGPENDING		(1<<TIF_SIGPENDING)
 #define _TIF_NEED_RESCHED	(1<<TIF_NEED_RESCHED)

arch/mips/kernel/setup.c

@@ -79,7 +79,7 @@ static struct resource data_resource = { .name = "Kernel data", };
 void __init add_memory_region(phys_t start, phys_t size, long type)
 {
 	int x = boot_mem_map.nr_map;
-	struct boot_mem_map_entry *prev = boot_mem_map.map + x - 1;
+	int i;
 
 	/* Sanity check */
 	if (start + size < start) {
@@ -88,15 +88,29 @@ void __init add_memory_region(phys_t start, phys_t size, long type)
 	}
 
 	/*
-	 * Try to merge with previous entry if any.  This is far less than
-	 * perfect but is sufficient for most real world cases.
+	 * Try to merge with existing entry, if any.
 	 */
-	if (x && prev->addr + prev->size == start && prev->type == type) {
-		prev->size += size;
+	for (i = 0; i < boot_mem_map.nr_map; i++) {
+		struct boot_mem_map_entry *entry = boot_mem_map.map + i;
+		unsigned long top;
+
+		if (entry->type != type)
+			continue;
+
+		if (start + size < entry->addr)
+			continue;			/* no overlap */
+
+		if (entry->addr + entry->size < start)
+			continue;			/* no overlap */
+
+		top = max(entry->addr + entry->size, start + size);
+		entry->addr = min(entry->addr, start);
+		entry->size = top - entry->addr;
+
 		return;
 	}
 
-	if (x == BOOT_MEM_MAP_MAX) {
+	if (boot_mem_map.nr_map == BOOT_MEM_MAP_MAX) {
 		pr_err("Ooops! Too many entries in the memory map!\n");
 		return;
 	}