staging/rtl8192u: cleanfile run

Run cleanfile on all files inside drivers/staging/rtl819u

Signed-off-by: Sebastian Hahn <snsehahn@cip.cs.fau.de>
Signed-off-by: Jennifer Naumann <Jennifer.Naumann@informatik.stud.uni-erlangen.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/staging/rtl8192u/changes

@@ -2,4 +2,3 @@ v 0.1
 
 First version.
 This is based on the rtl8180-sa2400 pre-0.22-CVS code..
-

drivers/staging/rtl8192u/ieee80211/Makefile

@@ -25,4 +25,3 @@ obj-m +=ieee80211_crypt-rsl.o
 obj-m +=ieee80211_crypt_wep-rsl.o
 obj-m +=ieee80211_crypt_tkip-rsl.o
 obj-m +=ieee80211_crypt_ccmp-rsl.o
-

drivers/staging/rtl8192u/ieee80211/aes.c

@@ -443,7 +443,7 @@ static struct crypto_alg aes_alg = {
 		.cipher = {
 			.cia_min_keysize	=	AES_MIN_KEY_SIZE,
 			.cia_max_keysize	=	AES_MAX_KEY_SIZE,
-			.cia_setkey		= 	aes_set_key,
+			.cia_setkey		=	aes_set_key,
 			.cia_encrypt		=	aes_encrypt,
 			.cia_decrypt		=	aes_decrypt
 		}
@@ -466,4 +466,3 @@ module_exit(aes_fini);
 
 MODULE_DESCRIPTION("Rijndael (AES) Cipher Algorithm");
 MODULE_LICENSE("Dual BSD/GPL");
-

drivers/staging/rtl8192u/ieee80211/arc4.c

@@ -79,7 +79,7 @@ static struct crypto_alg arc4_alg = {
 	.cra_u			=	{ .cipher = {
 	.cia_min_keysize	=	ARC4_MIN_KEY_SIZE,
 	.cia_max_keysize	=	ARC4_MAX_KEY_SIZE,
-	.cia_setkey		= 	arc4_set_key,
+	.cia_setkey		=	arc4_set_key,
 	.cia_encrypt		=	arc4_crypt,
 	.cia_decrypt		=	arc4_crypt } }
 };

drivers/staging/rtl8192u/ieee80211/crypto_compat.h

@@ -56,5 +56,3 @@ static inline int crypto_cipher_decrypt(struct crypto_tfm *tfm,
 }
 //EXPORT_SYMBOL_GPL(crypto_alloc_tfm);
 //EXPORT_SYMBOL_GPL(crypto_free_tfm);
-
-

drivers/staging/rtl8192u/ieee80211/dot11d.c

@@ -218,4 +218,3 @@ EXPORT_SYMBOL(DOT11D_GetMaxTxPwrInDbm);
 EXPORT_SYMBOL(DOT11D_ScanComplete);
 EXPORT_SYMBOL(IsLegalChannel);
 EXPORT_SYMBOL(ToLegalChannel);
-

drivers/staging/rtl8192u/ieee80211/ieee80211.h

@@ -64,7 +64,7 @@
 #endif
 
 #define KEY_TYPE_NA		0x0
-#define KEY_TYPE_WEP40 		0x1
+#define KEY_TYPE_WEP40		0x1
 #define KEY_TYPE_TKIP		0x2
 #define KEY_TYPE_CCMP		0x4
 #define KEY_TYPE_WEP104		0x5
@@ -195,21 +195,21 @@ enum	_ReasonCode{
 	auth_not_valid	= 0x2,
 	deauth_lv_ss	= 0x3,
 	inactivity		= 0x4,
-	ap_overload 	= 0x5,
+	ap_overload	= 0x5,
 	class2_err		= 0x6,
 	class3_err		= 0x7,
-	disas_lv_ss 	= 0x8,
+	disas_lv_ss	= 0x8,
 	asoc_not_auth	= 0x9,
 
 	//----MIC_CHECK
-	mic_failure 	= 0xe,
+	mic_failure	= 0xe,
 	//----END MIC_CHECK
 
 	// Reason code defined in 802.11i D10.0 p.28.
 	invalid_IE		= 0x0d,
 	four_way_tmout	= 0x0f,
 	two_way_tmout	= 0x10,
-	IE_dismatch 	= 0x11,
+	IE_dismatch	= 0x11,
 	invalid_Gcipher = 0x12,
 	invalid_Pcipher = 0x13,
 	invalid_AKMP	= 0x14,
@@ -222,7 +222,7 @@ enum	_ReasonCode{
 	QoS_unspec		= 0x20, // 32
 	QAP_bandwidth	= 0x21, // 33
 	poor_condition	= 0x22, // 34
-	no_facility 	= 0x23, // 35
+	no_facility	= 0x23, // 35
 							// Where is 36???
 	req_declined	= 0x25, // 37
 	invalid_param	= 0x26, // 38
@@ -265,7 +265,7 @@ enum	_ReasonCode{
 #define IEEE_WPAX_USEGROUP			0
 #define IEEE_WPAX_WEP40				1
 #define IEEE_WPAX_TKIP				2
-#define IEEE_WPAX_WRAP   			3
+#define IEEE_WPAX_WRAP				3
 #define IEEE_WPAX_CCMP				4
 #define IEEE_WPAX_WEP104			5
 
@@ -289,12 +289,12 @@ enum	_ReasonCode{
 #define MAX_IE_LEN  0xff
 
 // added for kernel conflict
-#define ieee80211_crypt_deinit_entries 	ieee80211_crypt_deinit_entries_rsl
-#define ieee80211_crypt_deinit_handler 	ieee80211_crypt_deinit_handler_rsl
-#define ieee80211_crypt_delayed_deinit 	ieee80211_crypt_delayed_deinit_rsl
-#define ieee80211_register_crypto_ops  	ieee80211_register_crypto_ops_rsl
+#define ieee80211_crypt_deinit_entries	ieee80211_crypt_deinit_entries_rsl
+#define ieee80211_crypt_deinit_handler	ieee80211_crypt_deinit_handler_rsl
+#define ieee80211_crypt_delayed_deinit	ieee80211_crypt_delayed_deinit_rsl
+#define ieee80211_register_crypto_ops	ieee80211_register_crypto_ops_rsl
 #define ieee80211_unregister_crypto_ops ieee80211_unregister_crypto_ops_rsl
-#define ieee80211_get_crypto_ops 	ieee80211_get_crypto_ops_rsl
+#define ieee80211_get_crypto_ops	ieee80211_get_crypto_ops_rsl
 
 #define ieee80211_ccmp_null		ieee80211_ccmp_null_rsl
 
@@ -302,10 +302,10 @@ enum	_ReasonCode{
 
 #define ieee80211_wep_null		ieee80211_wep_null_rsl
 
-#define free_ieee80211          	free_ieee80211_rsl
-#define alloc_ieee80211        		alloc_ieee80211_rsl
+#define free_ieee80211			free_ieee80211_rsl
+#define alloc_ieee80211			alloc_ieee80211_rsl
 
-#define ieee80211_rx 			ieee80211_rx_rsl
+#define ieee80211_rx			ieee80211_rx_rsl
 #define ieee80211_rx_mgt		ieee80211_rx_mgt_rsl
 
 #define ieee80211_get_beacon		ieee80211_get_beacon_rsl
@@ -450,7 +450,7 @@ typedef struct ieee_param {
 
 /* management */
 #define IEEE80211_STYPE_ASSOC_REQ	0x0000
-#define IEEE80211_STYPE_ASSOC_RESP 	0x0010
+#define IEEE80211_STYPE_ASSOC_RESP	0x0010
 #define IEEE80211_STYPE_REASSOC_REQ	0x0020
 #define IEEE80211_STYPE_REASSOC_RESP	0x0030
 #define IEEE80211_STYPE_PROBE_REQ	0x0040
@@ -536,7 +536,7 @@ do { if (ieee80211_debug_level & (level)) \
 //if you want print DATA buffer related BA, please set ieee80211_debug_level to DATA|BA
 #define IEEE80211_DEBUG_DATA(level, data, datalen)	\
 	do{ if ((ieee80211_debug_level & (level)) == (level))	\
-		{ 	\
+		{	\
 			int i;					\
 			u8* pdata = (u8*) data;			\
 			printk(KERN_DEBUG "ieee80211: %s()\n", __FUNCTION__);	\
@@ -623,20 +623,20 @@ do { if (ieee80211_debug_level & (level)) \
 #define MAX_STR_LEN     64
 /* I want to see ASCII 33 to 126 only. Otherwise, I print '?'. Annie, 2005-11-22.*/
 #define PRINTABLE(_ch)  (_ch>'!' && _ch<'~')
-#define IEEE80211_PRINT_STR(_Comp, _TitleString, _Ptr, _Len)                            	\
-			if((_Comp) & level)   							\
+#define IEEE80211_PRINT_STR(_Comp, _TitleString, _Ptr, _Len)					\
+			if((_Comp) & level)							\
 			{                                                                       \
 				int             __i;                                            \
-				u8  buffer[MAX_STR_LEN];                                    	\
-				int length = (_Len<MAX_STR_LEN)? _Len : (MAX_STR_LEN-1) ;  	\
-				memset(buffer, 0, MAX_STR_LEN);                      		\
-				memcpy(buffer, (u8 *)_Ptr, length );            		\
+				u8  buffer[MAX_STR_LEN];					\
+				int length = (_Len<MAX_STR_LEN)? _Len : (MAX_STR_LEN-1) ;	\
+				memset(buffer, 0, MAX_STR_LEN);					\
+				memcpy(buffer, (u8 *)_Ptr, length );				\
 				for( __i=0; __i<MAX_STR_LEN; __i++ )                            \
 				{                                                               \
-				     if( !PRINTABLE(buffer[__i]) )   buffer[__i] = '?';     	\
+				     if( !PRINTABLE(buffer[__i]) )   buffer[__i] = '?';		\
 				}                                                               \
 				buffer[length] = '\0';                                          \
-				printk("Rtl819x: ");                                         	\
+				printk("Rtl819x: ");						\
 				printk(_TitleString);                                         \
 				printk(": %d, <%s>\n", _Len, buffer);                         \
 			}
@@ -785,12 +785,12 @@ enum ieee80211_reasoncode {
 #define IEEE80211_24GHZ_BAND     (1<<0)
 #define IEEE80211_52GHZ_BAND     (1<<1)
 
-#define IEEE80211_CCK_RATE_LEN  		4
+#define IEEE80211_CCK_RATE_LEN			4
 #define IEEE80211_CCK_RATE_1MB			0x02
 #define IEEE80211_CCK_RATE_2MB			0x04
 #define IEEE80211_CCK_RATE_5MB			0x0B
 #define IEEE80211_CCK_RATE_11MB			0x16
-#define IEEE80211_OFDM_RATE_LEN 		8
+#define IEEE80211_OFDM_RATE_LEN			8
 #define IEEE80211_OFDM_RATE_6MB			0x0C
 #define IEEE80211_OFDM_RATE_9MB			0x12
 #define IEEE80211_OFDM_RATE_12MB		0x18
@@ -919,10 +919,10 @@ struct ieee80211_rx_stats {
 	u16          fraglength;                        // FragLength should equal to PacketLength in non-fragment case
 	u16          fragoffset;                        // Data offset for this fragment
 	u16          ntotalfrag;
-	bool      	  bisrxaggrsubframe;
+	bool		  bisrxaggrsubframe;
 	bool		  bPacketBeacon;	//cosa add for rssi
 	bool		  bToSelfBA;		//cosa add for rssi
-	char 	  cck_adc_pwdb[4];	//cosa add for rx path selection
+	char	  cck_adc_pwdb[4];	//cosa add for rx path selection
 	u16		  Seq_Num;
 
 };
@@ -992,7 +992,7 @@ struct ieee80211_device;
 #define SEC_ALG_TKIP            2
 #define SEC_ALG_CCMP            3
 
-#define WEP_KEYS 		4
+#define WEP_KEYS		4
 #define WEP_KEY_LEN		13
 #define SCM_KEY_LEN             32
 #define SCM_TEMPORAL_KEY_LENGTH 16
@@ -1205,7 +1205,7 @@ struct ieee80211_drv_agg_txb {
 	struct sk_buff *tx_agg_frames[MAX_TX_AGG_COUNT];
 }__attribute__((packed));
 
-#define MAX_SUBFRAME_COUNT 		  64
+#define MAX_SUBFRAME_COUNT		  64
 struct ieee80211_rxb {
 	u8 nr_subframes;
 	struct sk_buff *subframes[MAX_SUBFRAME_COUNT];
@@ -1534,7 +1534,7 @@ struct ieee80211_network {
 	bool	bWithAironetIE;
 	bool	bCkipSupported;
 	bool	bCcxRmEnable;
-	u16 	CcxRmState[2];
+	u16	CcxRmState[2];
 	// CCXv4 S59, MBSSID.
 	bool	bMBssidValid;
 	u8	MBssidMask;
@@ -1726,7 +1726,7 @@ typedef struct _RT_POWER_SAVE_CONTROL
 	bool				bIPSModeBackup;
 	bool				bSwRfProcessing;
 	RT_RF_POWER_STATE	eInactivePowerState;
-	struct work_struct 	InactivePsWorkItem;
+	struct work_struct	InactivePsWorkItem;
 	struct timer_list	InactivePsTimer;
 
 	// Return point for join action
@@ -1837,11 +1837,11 @@ struct ieee80211_device {
 	u8				HTHighestOperaRate;
 	//wb added for rate operation mode to firmware
 	u8	bTxDisableRateFallBack;
-	u8 	bTxUseDriverAssingedRate;
+	u8	bTxUseDriverAssingedRate;
 	atomic_t	atm_chnlop;
 	atomic_t	atm_swbw;
 //	u8	HTHighestOperaRate;
-//	u8 	HTCurrentOperaRate;
+//	u8	HTCurrentOperaRate;
 
 	// 802.11e and WMM Traffic Stream Info (TX)
 	struct list_head		Tx_TS_Admit_List;
@@ -2055,9 +2055,9 @@ struct ieee80211_device {
 	bool	bdynamic_txpower_enable;
 
 	bool bCTSToSelfEnable;
-	u8 	CTSToSelfTH;
+	u8	CTSToSelfTH;
 
-	u32 	fsync_time_interval;
+	u32	fsync_time_interval;
 	u32	fsync_rate_bitmap;
 	u8	fsync_rssi_threshold;
 	bool	bfsync_enable;
@@ -2214,7 +2214,7 @@ struct ieee80211_device {
 #define IEEE_A            (1<<0)
 #define IEEE_B            (1<<1)
 #define IEEE_G            (1<<2)
-#define IEEE_N_24G 		  (1<<4)
+#define IEEE_N_24G		  (1<<4)
 #define	IEEE_N_5G		  (1<<5)
 #define IEEE_MODE_MASK    (IEEE_A|IEEE_B|IEEE_G)
 

drivers/staging/rtl8192u/ieee80211/ieee80211_module.c

@@ -233,9 +233,9 @@ static int debug = \
 	//		    IEEE80211_DL_TX	|
 	//		    IEEE80211_DL_RX	|
 			    //IEEE80211_DL_QOS    |
-	//		    IEEE80211_DL_HT 	|
+	//		    IEEE80211_DL_HT	|
 	//		    IEEE80211_DL_TS	|
-//			    IEEE80211_DL_BA 	|
+//			    IEEE80211_DL_BA	|
 	//		    IEEE80211_DL_REORDER|
 //			    IEEE80211_DL_TRACE  |
 			    //IEEE80211_DL_DATA	|

drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c

@@ -608,7 +608,7 @@ void RxReorderIndicatePacket( struct ieee80211_device *ieee,
 		u16			SeqNum)
 {
 	PRT_HIGH_THROUGHPUT	pHTInfo = ieee->pHTInfo;
-	PRX_REORDER_ENTRY 	pReorderEntry = NULL;
+	PRX_REORDER_ENTRY	pReorderEntry = NULL;
 	struct ieee80211_rxb* prxbIndicateArray[REORDER_WIN_SIZE];
 	u8			WinSize = pHTInfo->RxReorderWinSize;
 	u16			WinEnd = (pTS->RxIndicateSeq + WinSize -1)%4096;
@@ -1043,7 +1043,7 @@ int ieee80211_rx(struct ieee80211_device *ieee, struct sk_buff *skb,
 		{
 
 		//	IEEE80211_DEBUG(IEEE80211_DL_REORDER,"%s(): pRxTS->RxLastFragNum is %d,frag is %d,pRxTS->RxLastSeqNum is %d,seq is %d\n",__FUNCTION__,pRxTS->RxLastFragNum,frag,pRxTS->RxLastSeqNum,WLAN_GET_SEQ_SEQ(sc));
-			if( 	(fc & (1<<11))  &&
+			if(	(fc & (1<<11))  &&
 					(frag == pRxTS->RxLastFragNum) &&
 					(WLAN_GET_SEQ_SEQ(sc) == pRxTS->RxLastSeqNum)	)
 			{
@@ -1839,12 +1839,12 @@ int ieee80211_parse_info_param(struct ieee80211_device *ieee,
 				   info_element->data[3] == 0x033){
 
 						tmp_htcap_len = min(info_element->len,(u8)MAX_IE_LEN);
-				   		if(tmp_htcap_len != 0){
-				   			network->bssht.bdHTSpecVer = HT_SPEC_VER_EWC;
+						if(tmp_htcap_len != 0){
+							network->bssht.bdHTSpecVer = HT_SPEC_VER_EWC;
 							network->bssht.bdHTCapLen = tmp_htcap_len > sizeof(network->bssht.bdHTCapBuf)?\
 								sizeof(network->bssht.bdHTCapBuf):tmp_htcap_len;
 							memcpy(network->bssht.bdHTCapBuf,info_element->data,network->bssht.bdHTCapLen);
-				   		}
+						}
 				}
 				if(tmp_htcap_len != 0)
 					network->bssht.bdSupportHT = true;
@@ -1856,9 +1856,9 @@ int ieee80211_parse_info_param(struct ieee80211_device *ieee,
 			if(tmp_htinfo_len == 0){
 				if(info_element->len >= 4 &&
 					info_element->data[0] == 0x00 &&
-				   	info_element->data[1] == 0x90 &&
-				   	info_element->data[2] == 0x4c &&
-				   	info_element->data[3] == 0x034){
+					info_element->data[1] == 0x90 &&
+					info_element->data[2] == 0x4c &&
+					info_element->data[3] == 0x034){
 
 						tmp_htinfo_len = min(info_element->len,(u8)MAX_IE_LEN);
 						if(tmp_htinfo_len != 0){
@@ -2060,7 +2060,7 @@ int ieee80211_parse_info_param(struct ieee80211_device *ieee,
 				if(	(info_element->data[IE_CISCO_FLAG_POSITION]&SUPPORT_CKIP_MIC)	||
 					(info_element->data[IE_CISCO_FLAG_POSITION]&SUPPORT_CKIP_PK)	)
 				{
-		 			network->bCkipSupported = true;
+					network->bCkipSupported = true;
 				}
 				else
 				{
@@ -2070,7 +2070,7 @@ int ieee80211_parse_info_param(struct ieee80211_device *ieee,
 			else
 			{
 				network->bWithAironetIE = false;
-		 		network->bCkipSupported = false;
+				network->bCkipSupported = false;
 			}
 			break;
 		case MFIE_TYPE_QOS_PARAMETER:
@@ -2230,8 +2230,8 @@ static inline int ieee80211_network_init(
 	} else
 		network->flags |= NETWORK_HAS_CCK;
 
- 	network->wpa_ie_len = 0;
- 	network->rsn_ie_len = 0;
+	network->wpa_ie_len = 0;
+	network->rsn_ie_len = 0;
 
         if (ieee80211_parse_info_param
             (ieee,beacon->info_element, stats->len - sizeof(*beacon), network, stats))

drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c

@@ -3124,7 +3124,7 @@ inline struct sk_buff *ieee80211_disassociate_skb(
 void
 SendDisassociation(
 		struct ieee80211_device *ieee,
-		u8* 					asSta,
+		u8*					asSta,
 		u8						asRsn
 )
 {

drivers/staging/rtl8192u/ieee80211/ieee80211_tx.c

@@ -395,7 +395,7 @@ ieee80211_query_HTCapShortGI(struct ieee80211_device *ieee, cb_desc *tcb_desc)
 {
 	PRT_HIGH_THROUGHPUT		pHTInfo = ieee->pHTInfo;
 
-	tcb_desc->bUseShortGI 		= false;
+	tcb_desc->bUseShortGI		= false;
 
 	if(!pHTInfo->bCurrentHTSupport||!pHTInfo->bEnableHT)
 		return;
@@ -514,7 +514,7 @@ void ieee80211_query_protectionmode(struct ieee80211_device* ieee, cb_desc* tcb_
 			if(pHTInfo->IOTAction & HT_IOT_ACT_FORCED_CTS2SELF)
 			{
 				tcb_desc->bCTSEnable	= true;
-				tcb_desc->rts_rate  = 	MGN_24M;
+				tcb_desc->rts_rate  =	MGN_24M;
 				tcb_desc->bRTSEnable = true;
 				break;
 			}
@@ -527,7 +527,7 @@ void ieee80211_query_protectionmode(struct ieee80211_device* ieee, cb_desc* tcb_
 	{
 		tcb_desc->bCTSEnable	= true;
 		tcb_desc->rts_rate = MGN_24M;
-		tcb_desc->bRTSEnable 	= true;
+		tcb_desc->bRTSEnable	= true;
 	}
 	if (ieee->current_network.capability & WLAN_CAPABILITY_SHORT_PREAMBLE)
 		tcb_desc->bUseShortPreamble = true;
@@ -833,7 +833,7 @@ int ieee80211_xmit(struct sk_buff *skb, struct net_device *dev)
 		  else
 			ieee->seq_ctrl[UP2AC(skb->priority) + 1]++;
 		} else {
-  		  if (ieee->seq_ctrl[0] == 0xFFF)
+		  if (ieee->seq_ctrl[0] == 0xFFF)
 			ieee->seq_ctrl[0] = 0;
 		  else
 			ieee->seq_ctrl[0]++;

drivers/staging/rtl8192u/ieee80211/internal.h

@@ -79,4 +79,3 @@ void crypto_exit_cipher_ops(struct crypto_tfm *tfm);
 void crypto_exit_compress_ops(struct crypto_tfm *tfm);
 
 #endif	/* _CRYPTO_INTERNAL_H */
-

drivers/staging/rtl8192u/ieee80211/rtl819x_BA.h

@@ -1,7 +1,7 @@
 #ifndef _BATYPE_H_
 #define _BATYPE_H_
 
-#define 	TOTAL_TXBA_NUM	16
+#define		TOTAL_TXBA_NUM	16
 #define	TOTAL_RXBA_NUM	16
 
 #define	BA_SETUP_TIMEOUT	200
@@ -66,4 +66,3 @@ typedef struct _BA_RECORD {
 } BA_RECORD, *PBA_RECORD;
 
 #endif //end _BATYPE_H_
-

drivers/staging/rtl8192u/ieee80211/rtl819x_BAProc.c

@@ -9,8 +9,8 @@
 
 /********************************************************************************************************************
  *function:  Activate BA entry. And if Time is nozero, start timer.
- *   input:  PBA_RECORD 		pBA  //BA entry to be enabled
- *   	     u16 			Time //indicate time delay.
+ *   input:  PBA_RECORD			pBA  //BA entry to be enabled
+ *	     u16			Time //indicate time delay.
  *  output:  none
 ********************************************************************************************************************/
 void ActivateBAEntry(struct ieee80211_device* ieee, PBA_RECORD pBA, u16 Time)
@@ -22,7 +22,7 @@ void ActivateBAEntry(struct ieee80211_device* ieee, PBA_RECORD pBA, u16 Time)
 
 /********************************************************************************************************************
  *function:  deactivate BA entry, including its timer.
- *   input:  PBA_RECORD 		pBA  //BA entry to be disabled
+ *   input:  PBA_RECORD			pBA  //BA entry to be disabled
  *  output:  none
 ********************************************************************************************************************/
 void DeActivateBAEntry( struct ieee80211_device* ieee, PBA_RECORD pBA)
@@ -33,7 +33,7 @@ void DeActivateBAEntry( struct ieee80211_device* ieee, PBA_RECORD pBA)
 /********************************************************************************************************************
  *function: deactivete BA entry in Tx Ts, and send DELBA.
  *   input:
- *   	     PTX_TS_RECORD		pTxTs //Tx Ts which is to deactivate BA entry.
+ *	     PTX_TS_RECORD		pTxTs //Tx Ts which is to deactivate BA entry.
  *  output:  none
  *  notice:  As PTX_TS_RECORD structure will be defined in QOS, so wait to be merged. //FIXME
 ********************************************************************************************************************/
@@ -63,7 +63,7 @@ u8 TxTsDeleteBA( struct ieee80211_device* ieee, PTX_TS_RECORD	pTxTs)
 /********************************************************************************************************************
  *function: deactivete BA entry in Tx Ts, and send DELBA.
  *   input:
- *   	     PRX_TS_RECORD		pRxTs //Rx Ts which is to deactivate BA entry.
+ *	     PRX_TS_RECORD		pRxTs //Rx Ts which is to deactivate BA entry.
  *  output:  none
  *  notice:  As PRX_TS_RECORD structure will be defined in QOS, so wait to be merged. //FIXME, same with above
 ********************************************************************************************************************/
@@ -84,7 +84,7 @@ u8 RxTsDeleteBA( struct ieee80211_device* ieee, PRX_TS_RECORD	pRxTs)
 /********************************************************************************************************************
  *function: reset BA entry
  *   input:
- *   	     PBA_RECORD		pBA //entry to be reset
+ *	     PBA_RECORD		pBA //entry to be reset
  *  output:  none
 ********************************************************************************************************************/
 void ResetBaEntry( PBA_RECORD pBA)
@@ -98,12 +98,12 @@ void ResetBaEntry( PBA_RECORD pBA)
 //These functions need porting here or not?
 /*******************************************************************************************************************************
  *function:  construct ADDBAREQ and ADDBARSP frame here together.
- *   input:  u8* 		Dst 	//ADDBA frame's destination
- *   	     PBA_RECORD 	pBA	//BA_RECORD entry which stores the necessary information for BA.
- *   	     u16 		StatusCode  //status code in RSP and I will use it to indicate whether it's RSP or REQ(will I?)
- *   	     u8			type	//indicate whether it's RSP(ACT_ADDBARSP) ow REQ(ACT_ADDBAREQ)
+ *   input:  u8*		Dst	//ADDBA frame's destination
+ *	     PBA_RECORD		pBA	//BA_RECORD entry which stores the necessary information for BA.
+ *	     u16		StatusCode  //status code in RSP and I will use it to indicate whether it's RSP or REQ(will I?)
+ *	     u8			type	//indicate whether it's RSP(ACT_ADDBARSP) ow REQ(ACT_ADDBAREQ)
  *  output:  none
- *  return:  sk_buff* 		skb     //return constructed skb to xmit
+ *  return:  sk_buff*		skb     //return constructed skb to xmit
 *******************************************************************************************************************************/
 static struct sk_buff* ieee80211_ADDBA(struct ieee80211_device* ieee, u8* Dst, PBA_RECORD pBA, u16 StatusCode, u8 type)
 {
@@ -126,7 +126,7 @@ static struct sk_buff* ieee80211_ADDBA(struct ieee80211_device* ieee, u8* Dst, P
 		return NULL;
 	}
 
-	memset(skb->data, 0, sizeof( struct ieee80211_hdr_3addr));  	//I wonder whether it's necessary. Apparently kernel will not do it when alloc a skb.
+	memset(skb->data, 0, sizeof( struct ieee80211_hdr_3addr));	//I wonder whether it's necessary. Apparently kernel will not do it when alloc a skb.
 	skb_reserve(skb, ieee->tx_headroom);
 
 	BAReq = ( struct ieee80211_hdr_3addr *) skb_put(skb,sizeof( struct ieee80211_hdr_3addr));
@@ -177,12 +177,12 @@ static struct sk_buff* ieee80211_ADDBA(struct ieee80211_device* ieee, u8* Dst, P
 
 /********************************************************************************************************************
  *function:  construct DELBA frame
- *   input:  u8* 		dst 	//DELBA frame's destination
- *   	     PBA_RECORD 	pBA	//BA_RECORD entry which stores the necessary information for BA
- *   	     TR_SELECT	        TxRxSelect  //TX RX direction
- *   	     u16 		ReasonCode  //status code.
+ *   input:  u8*		dst	//DELBA frame's destination
+ *	     PBA_RECORD		pBA	//BA_RECORD entry which stores the necessary information for BA
+ *	     TR_SELECT	        TxRxSelect  //TX RX direction
+ *	     u16		ReasonCode  //status code.
  *  output:  none
- *  return:  sk_buff* 		skb     //return constructed skb to xmit
+ *  return:  sk_buff*		skb     //return constructed skb to xmit
 ********************************************************************************************************************/
 static struct sk_buff* ieee80211_DELBA(
 	struct ieee80211_device* ieee,
@@ -246,8 +246,8 @@ static struct sk_buff* ieee80211_DELBA(
 
 /********************************************************************************************************************
  *function: send ADDBAReq frame out
- *   input:  u8* 		dst 	//ADDBAReq frame's destination
- *   	     PBA_RECORD 	pBA	//BA_RECORD entry which stores the necessary information for BA
+ *   input:  u8*		dst	//ADDBAReq frame's destination
+ *	     PBA_RECORD		pBA	//BA_RECORD entry which stores the necessary information for BA
  *  output:  none
  *  notice: If any possible, please hide pBA in ieee. And temporarily use Manage Queue as softmac_mgmt_xmit() usually does
 ********************************************************************************************************************/
@@ -272,9 +272,9 @@ void ieee80211_send_ADDBAReq(struct ieee80211_device* ieee, u8*	dst, PBA_RECORD
 
 /********************************************************************************************************************
  *function: send ADDBARSP frame out
- *   input:  u8* 		dst 	//DELBA frame's destination
- *   	     PBA_RECORD 	pBA	//BA_RECORD entry which stores the necessary information for BA
- *   	     u16		StatusCode //RSP StatusCode
+ *   input:  u8*		dst	//DELBA frame's destination
+ *	     PBA_RECORD		pBA	//BA_RECORD entry which stores the necessary information for BA
+ *	     u16		StatusCode //RSP StatusCode
  *  output:  none
  *  notice: If any possible, please hide pBA in ieee. And temporarily use Manage Queue as softmac_mgmt_xmit() usually does
 ********************************************************************************************************************/
@@ -297,10 +297,10 @@ void ieee80211_send_ADDBARsp(struct ieee80211_device* ieee, u8* dst, PBA_RECORD
 }
 /********************************************************************************************************************
  *function: send ADDBARSP frame out
- *   input:  u8* 		dst 	//DELBA frame's destination
- *   	     PBA_RECORD 	pBA	//BA_RECORD entry which stores the necessary information for BA
- *   	     TR_SELECT          TxRxSelect //TX or RX
- *   	     u16		ReasonCode //DEL ReasonCode
+ *   input:  u8*		dst	//DELBA frame's destination
+ *	     PBA_RECORD		pBA	//BA_RECORD entry which stores the necessary information for BA
+ *	     TR_SELECT          TxRxSelect //TX or RX
+ *	     u16		ReasonCode //DEL ReasonCode
  *  output:  none
  *  notice: If any possible, please hide pBA in ieee. And temporarily use Manage Queue as softmac_mgmt_xmit() usually does
 ********************************************************************************************************************/
@@ -340,7 +340,7 @@ int ieee80211_rx_ADDBAReq( struct ieee80211_device* ieee, struct sk_buff *skb)
 
 	if (skb->len < sizeof( struct ieee80211_hdr_3addr) + 9)
 	{
-		IEEE80211_DEBUG(IEEE80211_DL_ERR, " Invalid skb len in BAREQ(%d / %zu)\n", skb->len, 	(sizeof( struct ieee80211_hdr_3addr) + 9));
+		IEEE80211_DEBUG(IEEE80211_DL_ERR, " Invalid skb len in BAREQ(%d / %zu)\n", skb->len,	(sizeof( struct ieee80211_hdr_3addr) + 9));
 		return -1;
 	}
 
@@ -439,7 +439,7 @@ int ieee80211_rx_ADDBARsp( struct ieee80211_device* ieee, struct sk_buff *skb)
 
 	if (skb->len < sizeof( struct ieee80211_hdr_3addr) + 9)
 	{
-		IEEE80211_DEBUG(IEEE80211_DL_ERR, " Invalid skb len in BARSP(%d / %zu)\n", skb->len, 	(sizeof( struct ieee80211_hdr_3addr) + 9));
+		IEEE80211_DEBUG(IEEE80211_DL_ERR, " Invalid skb len in BARSP(%d / %zu)\n", skb->len,	(sizeof( struct ieee80211_hdr_3addr) + 9));
 		return -1;
 	}
 	rsp = ( struct ieee80211_hdr_3addr*)skb->data;
@@ -569,7 +569,7 @@ int ieee80211_rx_DELBA(struct ieee80211_device* ieee,struct sk_buff *skb)
 
 	if (skb->len < sizeof( struct ieee80211_hdr_3addr) + 6)
 	{
-		IEEE80211_DEBUG(IEEE80211_DL_ERR, " Invalid skb len in DELBA(%d / %zu)\n", skb->len, 	(sizeof( struct ieee80211_hdr_3addr) + 6));
+		IEEE80211_DEBUG(IEEE80211_DL_ERR, " Invalid skb len in DELBA(%d / %zu)\n", skb->len,	(sizeof( struct ieee80211_hdr_3addr) + 6));
 		return -1;
 	}
 
@@ -589,7 +589,7 @@ int ieee80211_rx_DELBA(struct ieee80211_device* ieee,struct sk_buff *skb)
 
 	if(pDelBaParamSet->field.Initiator == 1)
 	{
-		PRX_TS_RECORD 	pRxTs;
+		PRX_TS_RECORD	pRxTs;
 
 		if( !GetTs(
 				ieee,
@@ -657,7 +657,7 @@ TsInitAddBA(
 	// BufferSize: This need to be set according to A-MPDU vector
 	pBA->BaParamSet.field.BufferSize = 32;		// BufferSize: This need to be set according to A-MPDU vector
 	pBA->BaTimeoutValue = 0;					// Timeout value: Set 0 to disable Timer
-	pBA->BaStartSeqCtrl.field.SeqNum = (pTS->TxCurSeq + 3) % 4096; 	// Block Ack will start after 3 packets later.
+	pBA->BaStartSeqCtrl.field.SeqNum = (pTS->TxCurSeq + 3) % 4096;	// Block Ack will start after 3 packets later.
 
 	ActivateBAEntry(ieee, pBA, BA_SETUP_TIMEOUT);
 
@@ -734,4 +734,3 @@ void RxBaInactTimeout(unsigned long data)
 		DELBA_REASON_TIMEOUT);
 	return ;
 }
-

drivers/staging/rtl8192u/ieee80211/rtl819x_HT.h

@@ -121,7 +121,7 @@ typedef	union _HT_CAPABILITY_MACPARA{
 
 typedef enum _HT_ACTION{
 	ACT_RECOMMAND_WIDTH		= 0,
-	ACT_MIMO_PWR_SAVE 		= 1,
+	ACT_MIMO_PWR_SAVE		= 1,
 	ACT_PSMP					= 2,
 	ACT_SET_PCO_PHASE		= 3,
 	ACT_MIMO_CHL_MEASURE	= 4,
@@ -398,9 +398,9 @@ typedef struct _BSS_HT{
 typedef struct _MIMO_RSSI{
 	u32	EnableAntenna;
 	u32	AntennaA;
-	u32 	AntennaB;
-	u32 	AntennaC;
-	u32 	AntennaD;
+	u32	AntennaB;
+	u32	AntennaC;
+	u32	AntennaD;
 	u32	Average;
 }MIMO_RSSI, *PMIMO_RSSI;
 
@@ -436,11 +436,11 @@ extern u8 MCS_FILTER_1SS[16];
 
 
 // MCS Bw 40 {1~7, 12~15,32}
-#define	RATE_ADPT_1SS_MASK 		0xFF
+#define	RATE_ADPT_1SS_MASK		0xFF
 #define	RATE_ADPT_2SS_MASK		0xF0 //Skip MCS8~11 because mcs7 > mcs6, 9, 10, 11. 2007.01.16 by Emily
 #define	RATE_ADPT_MCS32_MASK		0x01
 
-#define 	IS_11N_MCS_RATE(rate)		(rate&0x80)
+#define		IS_11N_MCS_RATE(rate)		(rate&0x80)
 
 typedef enum _HT_AGGRE_SIZE{
 	HT_AGG_SIZE_8K = 0,
@@ -478,4 +478,3 @@ typedef enum _HT_IOT_ACTION{
 }HT_IOT_ACTION_E, *PHT_IOT_ACTION_E;
 
 #endif //_RTL819XU_HTTYPE_H_
-

drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c

@@ -21,7 +21,7 @@ u16 MCS_DATA_RATE[2][2][77] =
 			81, 162, 243, 324, 486, 648, 729, 810, 108, 216, 324, 432, 648, 864, 972, 1080,
 			12, 162, 216, 270, 243, 324, 405, 216, 270, 270, 324, 378, 378, 432, 324, 405,
 			405, 486, 567, 567, 648, 270, 324, 378, 324, 378, 432, 486, 432, 486, 540, 540,
-			594, 405, 486, 567, 486, 567, 648, 729, 648, 729, 810, 810, 891}, 	// Long GI, 40MHz
+			594, 405, 486, 567, 486, 567, 648, 729, 648, 729, 810, 810, 891},	// Long GI, 40MHz
 			{30, 60, 90, 120, 180, 240, 270, 300, 60, 120, 180, 240, 360, 480, 540, 600,
 			90, 180, 270, 360, 540, 720, 810, 900, 120, 240, 360, 480, 720, 960, 1080, 1200,
 			13, 180, 240, 300, 270, 360, 450, 240, 300, 300, 360, 420, 420, 480, 360, 450,
@@ -88,7 +88,7 @@ void HTUpdateDefaultSetting(struct ieee80211_device* ieee)
 	ieee->bTxDisableRateFallBack = 0;
 	ieee->bTxUseDriverAssingedRate = 0;
 
-#ifdef 	TO_DO_LIST
+#ifdef	TO_DO_LIST
 	// 8190 only. Assign duration operation mode to firmware
 	pMgntInfo->bTxEnableFwCalcDur = (BOOLEAN)pNdisCommon->bRegTxEnableFwCalcDur;
 #endif
@@ -116,7 +116,7 @@ void HTUpdateDefaultSetting(struct ieee80211_device* ieee)
 /********************************************************************************************************************
  *function:  This function print out each field on HT capability IE mainly from (Beacon/ProbeRsp/AssocReq)
  *   input:  u8*	CapIE       //Capability IE to be printed out
- *   	     u8* 	TitleString //mainly print out caller function
+ *	     u8*	TitleString //mainly print out caller function
  *  output:  none
  *  return:  none
  *  notice:  Driver should not print out this message by default.
@@ -125,7 +125,7 @@ void HTDebugHTCapability(u8* CapIE, u8* TitleString )
 {
 
 	static u8	EWC11NHTCap[] = {0x00, 0x90, 0x4c, 0x33};	// For 11n EWC definition, 2007.07.17, by Emily
-	PHT_CAPABILITY_ELE 		pCapELE;
+	PHT_CAPABILITY_ELE		pCapELE;
 
 	if(!memcmp(CapIE, EWC11NHTCap, sizeof(EWC11NHTCap)))
 	{
@@ -153,7 +153,7 @@ void HTDebugHTCapability(u8* CapIE, u8* TitleString )
 /********************************************************************************************************************
  *function:  This function print out each field on HT Information IE mainly from (Beacon/ProbeRsp)
  *   input:  u8*	InfoIE       //Capability IE to be printed out
- *   	     u8* 	TitleString //mainly print out caller function
+ *	     u8*	TitleString //mainly print out caller function
  *  output:  none
  *  return:  none
  *  notice:  Driver should not print out this message by default.
@@ -217,7 +217,7 @@ void HTDebugHTInfo(u8*	InfoIE, u8* TitleString)
 }
 
 /*
-*	Return:     	true if station in half n mode and AP supports 40 bw
+*	Return:		true if station in half n mode and AP supports 40 bw
 */
 bool IsHTHalfNmode40Bandwidth(struct ieee80211_device* ieee)
 {
@@ -228,7 +228,7 @@ bool IsHTHalfNmode40Bandwidth(struct ieee80211_device* ieee)
 		retValue = false;
 	else if(pHTInfo->bRegBW40MHz == false)	// station supports 40 bw
 		retValue = false;
-	else if(!ieee->GetHalfNmodeSupportByAPsHandler(ieee->dev)) 	// station in half n mode
+	else if(!ieee->GetHalfNmodeSupportByAPsHandler(ieee->dev))	// station in half n mode
 		retValue = false;
 	else if(((PHT_CAPABILITY_ELE)(pHTInfo->PeerHTCapBuf))->ChlWidth) // ap support 40 bw
 		retValue = true;
@@ -245,7 +245,7 @@ bool IsHTHalfNmodeSGI(struct ieee80211_device* ieee, bool is40MHz)
 
 	if(pHTInfo->bCurrentHTSupport == false )	// wireless is n mode
 		retValue = false;
-	else if(!ieee->GetHalfNmodeSupportByAPsHandler(ieee->dev)) 	// station in half n mode
+	else if(!ieee->GetHalfNmodeSupportByAPsHandler(ieee->dev))	// station in half n mode
 		retValue = false;
 	else if(is40MHz) // ap support 40 bw
 	{
@@ -265,7 +265,7 @@ bool IsHTHalfNmodeSGI(struct ieee80211_device* ieee, bool is40MHz)
 	return retValue;
 }
 
-u16 HTHalfMcsToDataRate(struct ieee80211_device* ieee, 	u8	nMcsRate)
+u16 HTHalfMcsToDataRate(struct ieee80211_device* ieee,	u8	nMcsRate)
 {
 
 	u8	is40MHz;
@@ -291,8 +291,8 @@ u16 HTMcsToDataRate( struct ieee80211_device* ieee, u8 nMcsRate)
 
 /********************************************************************************************************************
  *function:  This function returns current datarate.
- *   input:  struct ieee80211_device* 	ieee
- *   	     u8 			nDataRate
+ *   input:  struct ieee80211_device*	ieee
+ *	     u8				nDataRate
  *  output:  none
  *  return:  tx rate
  *  notice:  quite unsure about how to use this function //wb
@@ -371,7 +371,7 @@ bool IsHTHalfNmodeAPs(struct ieee80211_device* ieee)
 
 /********************************************************************************************************************
  *function:  This function returns peer IOT.
- *   input:  struct ieee80211_device* 	ieee
+ *   input:  struct ieee80211_device*	ieee
  *  output:  none
  *  return:
  *  notice:
@@ -408,8 +408,8 @@ void HTIOTPeerDetermine(struct ieee80211_device* ieee)
 /********************************************************************************************************************
  *function:  Check whether driver should declare received rate up to MCS13 only since some chipset is not good
  *	     at receiving MCS14~15 frame from some AP.
- *   input:  struct ieee80211_device* 	ieee
- *   	     u8 *			PeerMacAddr
+ *   input:  struct ieee80211_device*	ieee
+ *	     u8 *			PeerMacAddr
  *  output:  none
  *  return:  return 1 if driver should declare MCS13 only(otherwise return 0)
   * *****************************************************************************************************************/
@@ -429,7 +429,7 @@ u8 HTIOTActIsDisableMCS14(struct ieee80211_device* ieee, u8* PeerMacAddr)
 *			PADAPTER		Adapter,
 *
 * Output:		None
-* Return:     	true if driver should disable MCS15
+* Return:	true if driver should disable MCS15
 * 2008.04.15	Emily
 */
 bool HTIOTActIsDisableMCS15(struct ieee80211_device* ieee)
@@ -466,7 +466,7 @@ bool HTIOTActIsDisableMCS15(struct ieee80211_device* ieee)
 *			PADAPTER		Adapter,
 *
 * Output:		None
-* Return:     	true if driver should disable all two spatial stream packet
+* Return:	true if driver should disable all two spatial stream packet
 * 2008.04.21	Emily
 */
 bool HTIOTActIsDisableMCSTwoSpatialStream(struct ieee80211_device* ieee, u8 *PeerMacAddr)
@@ -481,12 +481,12 @@ bool HTIOTActIsDisableMCSTwoSpatialStream(struct ieee80211_device* ieee, u8 *Pee
 
 /********************************************************************************************************************
  *function:  Check whether driver should disable EDCA turbo mode
- *   input:  struct ieee80211_device* 	ieee
- *   	     u8* 			PeerMacAddr
+ *   input:  struct ieee80211_device*	ieee
+ *	     u8*			PeerMacAddr
  *  output:  none
  *  return:  return 1 if driver should disable EDCA turbo mode(otherwise return 0)
   * *****************************************************************************************************************/
-u8 HTIOTActIsDisableEDCATurbo(struct ieee80211_device* 	ieee, u8* PeerMacAddr)
+u8 HTIOTActIsDisableEDCATurbo(struct ieee80211_device*	ieee, u8* PeerMacAddr)
 {
 	u8	retValue = false;	// default enable EDCA Turbo mode.
 	// Set specific EDCA parameter for different AP in DM handler.
@@ -539,10 +539,10 @@ void HTResetIOTSetting(
 
 /********************************************************************************************************************
  *function:  Construct Capablility Element in Beacon... if HTEnable is turned on
- *   input:  struct ieee80211_device* 	ieee
- *   	     u8* 			posHTCap //pointer to store Capability Ele
- *   	     u8*			len //store length of CE
- *   	     u8				IsEncrypt //whether encrypt, needed further
+ *   input:  struct ieee80211_device*	ieee
+ *	     u8*			posHTCap //pointer to store Capability Ele
+ *	     u8*			len //store length of CE
+ *	     u8				IsEncrypt //whether encrypt, needed further
  *  output:  none
  *  return:  none
  *  notice:  posHTCap can't be null and should be initialized before.
@@ -550,7 +550,7 @@ void HTResetIOTSetting(
 void HTConstructCapabilityElement(struct ieee80211_device* ieee, u8* posHTCap, u8* len, u8 IsEncrypt)
 {
 	PRT_HIGH_THROUGHPUT	pHT = ieee->pHTInfo;
-	PHT_CAPABILITY_ELE 	pCapELE = NULL;
+	PHT_CAPABILITY_ELE	pCapELE = NULL;
 	//u8 bIsDeclareMCS13;
 
 	if ((posHTCap == NULL) || (pHT == NULL))
@@ -571,7 +571,7 @@ void HTConstructCapabilityElement(struct ieee80211_device* ieee, u8* posHTCap, u
 
 
 	//HT capability info
-	pCapELE->AdvCoding 		= 0; // This feature is not supported now!!
+	pCapELE->AdvCoding		= 0; // This feature is not supported now!!
 	if(ieee->GetHalfNmodeSupportByAPsHandler(ieee->dev))
 	{
 		pCapELE->ChlWidth = 0;
@@ -581,18 +581,18 @@ void HTConstructCapabilityElement(struct ieee80211_device* ieee, u8* posHTCap, u
 		pCapELE->ChlWidth = (pHT->bRegBW40MHz?1:0);
 	}
 
-//	pCapELE->ChlWidth 		= (pHT->bRegBW40MHz?1:0);
-	pCapELE->MimoPwrSave 		= pHT->SelfMimoPs;
+//	pCapELE->ChlWidth		= (pHT->bRegBW40MHz?1:0);
+	pCapELE->MimoPwrSave		= pHT->SelfMimoPs;
 	pCapELE->GreenField		= 0; // This feature is not supported now!!
 	pCapELE->ShortGI20Mhz		= 1; // We can receive Short GI!!
 	pCapELE->ShortGI40Mhz		= 1; // We can receive Short GI!!
 	//DbgPrint("TX HT cap/info ele BW=%d SG20=%d SG40=%d\n\r",
 		//pCapELE->ChlWidth, pCapELE->ShortGI20Mhz, pCapELE->ShortGI40Mhz);
-	pCapELE->TxSTBC 		= 1;
-	pCapELE->RxSTBC 		= 0;
+	pCapELE->TxSTBC			= 1;
+	pCapELE->RxSTBC			= 0;
 	pCapELE->DelayBA		= 0;	// Do not support now!!
 	pCapELE->MaxAMSDUSize	= (MAX_RECEIVE_BUFFER_SIZE>=7935)?1:0;
-	pCapELE->DssCCk 		= ((pHT->bRegBW40MHz)?(pHT->bRegSuppCCK?1:0):0);
+	pCapELE->DssCCk			= ((pHT->bRegBW40MHz)?(pHT->bRegSuppCCK?1:0):0);
 	pCapELE->PSMP			= 0; // Do not support now!!
 	pCapELE->LSigTxopProtect	= 0; // Do not support now!!
 
@@ -603,13 +603,13 @@ void HTConstructCapabilityElement(struct ieee80211_device* ieee, u8* posHTCap, u
 
 	if( IsEncrypt)
 	{
-		pCapELE->MPDUDensity 	= 7; // 8us
-		pCapELE->MaxRxAMPDUFactor 	= 2; // 2 is for 32 K and 3 is 64K
+		pCapELE->MPDUDensity	= 7; // 8us
+		pCapELE->MaxRxAMPDUFactor	= 2; // 2 is for 32 K and 3 is 64K
 	}
 	else
 	{
-		pCapELE->MaxRxAMPDUFactor 	= 3; // 2 is for 32 K and 3 is 64K
-		pCapELE->MPDUDensity 	= 0; // no density
+		pCapELE->MaxRxAMPDUFactor	= 3; // 2 is for 32 K and 3 is 64K
+		pCapELE->MPDUDensity	= 0; // no density
 	}
 
 	//Supported MCS set
@@ -658,10 +658,10 @@ void HTConstructCapabilityElement(struct ieee80211_device* ieee, u8* posHTCap, u
 }
 /********************************************************************************************************************
  *function:  Construct  Information Element in Beacon... if HTEnable is turned on
- *   input:  struct ieee80211_device* 	ieee
- *   	     u8* 			posHTCap //pointer to store Information Ele
- *   	     u8*			len   //store len of
- *   	     u8				IsEncrypt //whether encrypt, needed further
+ *   input:  struct ieee80211_device*	ieee
+ *	     u8*			posHTCap //pointer to store Information Ele
+ *	     u8*			len   //store len of
+ *	     u8				IsEncrypt //whether encrypt, needed further
  *  output:  none
  *  return:  none
  *  notice:  posHTCap can't be null and be initialized before. only AP and IBSS sta should do this
@@ -679,12 +679,12 @@ void HTConstructInfoElement(struct ieee80211_device* ieee, u8* posHTInfo, u8* le
 	memset(posHTInfo, 0, *len);
 	if ( (ieee->iw_mode == IW_MODE_ADHOC) || (ieee->iw_mode == IW_MODE_MASTER)) //ap mode is not currently supported
 	{
-		pHTInfoEle->ControlChl 			= ieee->current_network.channel;
-		pHTInfoEle->ExtChlOffset 			= ((pHT->bRegBW40MHz == false)?HT_EXTCHNL_OFFSET_NO_EXT:
+		pHTInfoEle->ControlChl			= ieee->current_network.channel;
+		pHTInfoEle->ExtChlOffset			= ((pHT->bRegBW40MHz == false)?HT_EXTCHNL_OFFSET_NO_EXT:
 											(ieee->current_network.channel<=6)?
 												HT_EXTCHNL_OFFSET_UPPER:HT_EXTCHNL_OFFSET_LOWER);
 		pHTInfoEle->RecommemdedTxWidth	= pHT->bRegBW40MHz;
-		pHTInfoEle->RIFS 					= 0;
+		pHTInfoEle->RIFS					= 0;
 		pHTInfoEle->PSMPAccessOnly		= 0;
 		pHTInfoEle->SrvIntGranularity		= 0;
 		pHTInfoEle->OptMode				= pHT->CurrentOpMode;
@@ -723,17 +723,17 @@ void HTConstructInfoElement(struct ieee80211_device* ieee, u8* posHTInfo, u8* le
   *  Element ID		Length		OUI			Type1		Reserved
   *  1 byte			1 byte		3 bytes		1 byte		1 byte
   *
-  *  OUI 		= 0x00, 0xe0, 0x4c,
-  *  Type 	= 0x02
-  *  Reserved 	= 0x00
+  *  OUI		= 0x00, 0xe0, 0x4c,
+  *  Type	= 0x02
+  *  Reserved	= 0x00
   *
   *  2007.8.21 by Emily
 */
 /********************************************************************************************************************
  *function:  Construct  Information Element in Beacon... in RT2RT condition
- *   input:  struct ieee80211_device* 	ieee
- *   	     u8* 			posRT2RTAgg //pointer to store Information Ele
- *   	     u8*			len   //store len
+ *   input:  struct ieee80211_device*	ieee
+ *	     u8*			posRT2RTAgg //pointer to store Information Ele
+ *	     u8*			len   //store len
  *  output:  none
  *  return:  none
  *  notice:
@@ -787,8 +787,8 @@ void HTConstructRT2RTAggElement(struct ieee80211_device* ieee, u8* posRT2RTAgg,
 
 /********************************************************************************************************************
  *function:  Pick the right Rate Adaptive table to use
- *   input:  struct ieee80211_device* 	ieee
- *   	     u8* 			pOperateMCS //A pointer to MCS rate bitmap
+ *   input:  struct ieee80211_device*	ieee
+ *	     u8*			pOperateMCS //A pointer to MCS rate bitmap
  *  return:  always we return true
  *  notice:
   * *****************************************************************************************************************/
@@ -840,7 +840,7 @@ u8 HT_PickMCSRate(struct ieee80211_device* ieee, u8* pOperateMCS)
 *	Description:
 *		This function will get the highest speed rate in input MCS set.
 *
-*	/param 	Adapter			Pionter to Adapter entity
+*	/param	Adapter			Pionter to Adapter entity
 *			pMCSRateSet		Pointer to MCS rate bitmap
 *			pMCSFilter		Pointer to MCS rate filter
 *
@@ -849,9 +849,9 @@ u8 HT_PickMCSRate(struct ieee80211_device* ieee, u8* pOperateMCS)
 */
 /********************************************************************************************************************
  *function:  This function will get the highest speed rate in input MCS set.
- *   input:  struct ieee80211_device* 	ieee
- *   	     u8* 			pMCSRateSet //Pointer to MCS rate bitmap
- *   	     u8*			pMCSFilter //Pointer to MCS rate filter
+ *   input:  struct ieee80211_device*	ieee
+ *	     u8*			pMCSRateSet //Pointer to MCS rate bitmap
+ *	     u8*			pMCSFilter //Pointer to MCS rate filter
  *  return:  Highest MCS rate included in pMCSRateSet and filtered by pMCSFilter
  *  notice:
   * *****************************************************************************************************************/
@@ -1062,7 +1062,7 @@ void HTOnAssocRsp(struct ieee80211_device *ieee)
 	else
 		pHTInfo->CurrentMPDUDensity = pPeerHTCap->MPDUDensity;
 	if(ieee->pairwise_key_type != KEY_TYPE_NA )
-		pHTInfo->CurrentMPDUDensity 	= 7; // 8us
+		pHTInfo->CurrentMPDUDensity	= 7; // 8us
 	// Force TX AMSDU
 
 	// Lanhsin: mark for tmp to avoid deauth by ap from  s3
@@ -1118,7 +1118,7 @@ void HTOnAssocRsp(struct ieee80211_device *ieee)
 void HTSetConnectBwModeCallback(struct ieee80211_device* ieee);
 /********************************************************************************************************************
  *function:  initialize HT info(struct PRT_HIGH_THROUGHPUT)
- *   input:  struct ieee80211_device* 	ieee
+ *   input:  struct ieee80211_device*	ieee
  *  output:  none
  *  return:  none
  *  notice: This function is called when *  (1) MPInitialization Phase *  (2) Receiving of Deauthentication from AP
@@ -1208,13 +1208,13 @@ void HTInitializeBssDesc(PBSS_HT pBssHT)
 }
 /********************************************************************************************************************
  *function:  initialize Bss HT structure(struct PBSS_HT)
- *   input:  struct ieee80211_device 	*ieee
- *   	     struct ieee80211_network 	*pNetwork //usually current network we are live in
+ *   input:  struct ieee80211_device	*ieee
+ *	     struct ieee80211_network	*pNetwork //usually current network we are live in
  *  output:  none
  *  return:  none
  *  notice: This function should ONLY be called before association
 ********************************************************************************************************************/
-void HTResetSelfAndSavePeerSetting(struct ieee80211_device* ieee, 	struct ieee80211_network * pNetwork)
+void HTResetSelfAndSavePeerSetting(struct ieee80211_device* ieee,	struct ieee80211_network * pNetwork)
 {
 	PRT_HIGH_THROUGHPUT		pHTInfo = ieee->pHTInfo;
 //	u16						nMaxAMSDUSize;
@@ -1235,7 +1235,7 @@ void HTResetSelfAndSavePeerSetting(struct ieee80211_device* ieee, 	struct ieee80
 		pHTInfo->ePeerHTSpecVer = pNetwork->bssht.bdHTSpecVer;
 
 		// Save HTCap and HTInfo information Element
-		if(pNetwork->bssht.bdHTCapLen > 0 && 	pNetwork->bssht.bdHTCapLen <= sizeof(pHTInfo->PeerHTCapBuf))
+		if(pNetwork->bssht.bdHTCapLen > 0 &&	pNetwork->bssht.bdHTCapLen <= sizeof(pHTInfo->PeerHTCapBuf))
 			memcpy(pHTInfo->PeerHTCapBuf, pNetwork->bssht.bdHTCapBuf, pNetwork->bssht.bdHTCapLen);
 
 		if(pNetwork->bssht.bdHTInfoLen > 0 && pNetwork->bssht.bdHTInfoLen <= sizeof(pHTInfo->PeerHTInfoBuf))
@@ -1297,7 +1297,7 @@ void HTResetSelfAndSavePeerSetting(struct ieee80211_device* ieee, 	struct ieee80
 
 }
 
-void HTUpdateSelfAndPeerSetting(struct ieee80211_device* ieee, 	struct ieee80211_network * pNetwork)
+void HTUpdateSelfAndPeerSetting(struct ieee80211_device* ieee,	struct ieee80211_network * pNetwork)
 {
 	PRT_HIGH_THROUGHPUT	pHTInfo = ieee->pHTInfo;
 //	PHT_CAPABILITY_ELE		pPeerHTCap = (PHT_CAPABILITY_ELE)pNetwork->bssht.bdHTCapBuf;
@@ -1364,8 +1364,8 @@ void HTUseDefaultSetting(struct ieee80211_device* ieee)
 }
 /********************************************************************************************************************
  *function:  check whether HT control field exists
- *   input:  struct ieee80211_device 	*ieee
- *   	     u8*			pFrame //coming skb->data
+ *   input:  struct ieee80211_device	*ieee
+ *	     u8*			pFrame //coming skb->data
  *  output:  none
  *  return:  return true if HT control field exists(false otherwise)
  *  notice:

drivers/staging/rtl8192u/ieee80211/rtl819x_Qos.h

@@ -412,14 +412,14 @@ typedef union _QOS_TCLAS{
 
 	struct _TYPE_GENERAL{
 		u8		Priority;
-		u8 		ClassifierType;
-		u8 		Mask;
+		u8		ClassifierType;
+		u8		Mask;
 	} TYPE_GENERAL;
 
 	struct _TYPE0_ETH{
 		u8		Priority;
-		u8 		ClassifierType;
-		u8 		Mask;
+		u8		ClassifierType;
+		u8		Mask;
 		u8		SrcAddr[6];
 		u8		DstAddr[6];
 		u16		Type;
@@ -427,9 +427,9 @@ typedef union _QOS_TCLAS{
 
 	struct _TYPE1_IPV4{
 		u8		Priority;
-		u8 		ClassifierType;
-		u8 		Mask;
-		u8 		Version;
+		u8		ClassifierType;
+		u8		Mask;
+		u8		Version;
 		u8		SrcIP[4];
 		u8		DstIP[4];
 		u16		SrcPort;
@@ -441,9 +441,9 @@ typedef union _QOS_TCLAS{
 
 	struct _TYPE1_IPV6{
 		u8		Priority;
-		u8 		ClassifierType;
-		u8 		Mask;
-		u8 		Version;
+		u8		ClassifierType;
+		u8		Mask;
+		u8		Version;
 		u8		SrcIP[16];
 		u8		DstIP[16];
 		u16		SrcPort;
@@ -453,8 +453,8 @@ typedef union _QOS_TCLAS{
 
 	struct _TYPE2_8021Q{
 		u8		Priority;
-		u8 		ClassifierType;
-		u8 		Mask;
+		u8		ClassifierType;
+		u8		Mask;
 		u16		TagType;
 	} TYPE2_8021Q;
 } QOS_TCLAS, *PQOS_TCLAS;
@@ -481,7 +481,7 @@ typedef struct _QOS_TSTREAM{
 //	"Qos control field" and "Qos info field"
 //typedef struct _QOS_UAPSD{
 //	u8			bTriggerEnable[4];
-//	u8 			MaxSPLength;
+//	u8			MaxSPLength;
 //	u8			HighestBufAC;
 //} QOS_UAPSD, *PQOS_APSD;
 
@@ -489,7 +489,7 @@ typedef struct _QOS_TSTREAM{
 //      802.11 Management frame Status Code field
 //----------------------------------------------------------------------------
 typedef struct _OCTET_STRING{
-	u8        	*Octet;
+	u8		*Octet;
 	u16             Length;
 }OCTET_STRING, *POCTET_STRING;
 
@@ -512,7 +512,7 @@ typedef struct _STA_QOS{
 	AC_UAPSD			Curr4acUapsd;
 	u8				bInServicePeriod;
 	u8				MaxSPLength;
-	int 				NumBcnBeforeTrigger;
+	int				NumBcnBeforeTrigger;
 
 	// Part 2. EDCA Parameter (perAC)
 	u8 *				pWMMInfoEle;
@@ -523,7 +523,7 @@ typedef struct _STA_QOS{
 	//2 ToDo: remove the Qos Info Field and replace it by the above WMM Info element.
 	// By Bruce, 2008-01-30.
 	// Part 2. EDCA Parameter (perAC)
-	QOS_INFO_FIELD			QosInfoField_STA; 	// Maintained by STA
+	QOS_INFO_FIELD			QosInfoField_STA;	// Maintained by STA
 	QOS_INFO_FIELD			QosInfoField_AP;	// Retrieved from AP
 
 	AC_PARAM			CurAcParameters[4];

drivers/staging/rtl8192u/ieee80211/rtl819x_TS.h

@@ -28,7 +28,7 @@ typedef struct _TS_COMMON_INFO{
 typedef struct _TX_TS_RECORD{
 	TS_COMMON_INFO		TsCommonInfo;
 	u16				TxCurSeq;
-	BA_RECORD			TxPendingBARecord;  	// For BA Originator
+	BA_RECORD			TxPendingBARecord;	// For BA Originator
 	BA_RECORD			TxAdmittedBARecord;	// For BA Originator
 //	QOS_DL_RECORD		DLRecord;
 	u8				bAddBaReqInProgress;
@@ -53,4 +53,3 @@ typedef struct _RX_TS_RECORD {
 
 
 #endif
-

drivers/staging/rtl8192u/ieee80211/rtl819x_TSProc.c

@@ -27,7 +27,7 @@ void RxPktPendingTimeout(unsigned long data)
 	PRX_TS_RECORD	pRxTs = (PRX_TS_RECORD)data;
 	struct ieee80211_device *ieee = container_of(pRxTs, struct ieee80211_device, RxTsRecord[pRxTs->num]);
 
-	PRX_REORDER_ENTRY 	pReorderEntry = NULL;
+	PRX_REORDER_ENTRY	pReorderEntry = NULL;
 
 	//u32 flags = 0;
 	unsigned long flags = 0;
@@ -236,8 +236,8 @@ void AdmitTS(struct ieee80211_device *ieee, PTS_COMMON_INFO pTsCommonInfo, u32 I
 
 PTS_COMMON_INFO SearchAdmitTRStream(struct ieee80211_device *ieee, u8*	Addr, u8 TID, TR_SELECT	TxRxSelect)
 {
-	//DIRECTION_VALUE 	dir;
-	u8 	dir;
+	//DIRECTION_VALUE	dir;
+	u8	dir;
 	bool				search_dir[4] = {0, 0, 0, 0};
 	struct list_head*		psearch_list; //FIXME
 	PTS_COMMON_INFO	pRet = NULL;
@@ -250,14 +250,14 @@ PTS_COMMON_INFO SearchAdmitTRStream(struct ieee80211_device *ieee, u8*	Addr, u8
 		}
 		else
 		{
-			search_dir[DIR_UP] 	= true;
+			search_dir[DIR_UP]	= true;
 			search_dir[DIR_BI_DIR]= true;
 		}
 	}
 	else if(ieee->iw_mode == IW_MODE_ADHOC)
 	{
 		if(TxRxSelect == TX_DIR)
-			search_dir[DIR_UP] 	= true;
+			search_dir[DIR_UP]	= true;
 		else
 			search_dir[DIR_DOWN] = true;
 	}
@@ -265,7 +265,7 @@ PTS_COMMON_INFO SearchAdmitTRStream(struct ieee80211_device *ieee, u8*	Addr, u8
 	{
 		if(TxRxSelect == TX_DIR)
 		{
-			search_dir[DIR_UP] 	= true;
+			search_dir[DIR_UP]	= true;
 			search_dir[DIR_BI_DIR]= true;
 			search_dir[DIR_DIRECT]= true;
 		}
@@ -450,8 +450,8 @@ bool GetTs(
 				pTSInfo->field.ucTSID = UP;			// TSID
 				pTSInfo->field.ucDirection = Dir;			// Direction: if there is DirectLink, this need additional consideration.
 				pTSInfo->field.ucAccessPolicy = 1;		// Access policy
-				pTSInfo->field.ucAggregation = 0; 		// Aggregation
-				pTSInfo->field.ucPSB = 0; 				// Aggregation
+				pTSInfo->field.ucAggregation = 0;		// Aggregation
+				pTSInfo->field.ucPSB = 0;				// Aggregation
 				pTSInfo->field.ucUP = UP;				// User priority
 				pTSInfo->field.ucTSInfoAckPolicy = 0;		// Ack policy
 				pTSInfo->field.ucSchedule = 0;			// Schedule
@@ -488,7 +488,7 @@ void RemoveTsEntry(
 	{
 //#ifdef TO_DO_LIST
 		PRX_REORDER_ENTRY	pRxReorderEntry;
-		PRX_TS_RECORD 		pRxTS = (PRX_TS_RECORD)pTs;
+		PRX_TS_RECORD		pRxTS = (PRX_TS_RECORD)pTs;
 		if(timer_pending(&pRxTS->RxPktPendingTimer))
 			del_timer_sync(&pRxTS->RxPktPendingTimer);
 

drivers/staging/rtl8192u/ieee80211/rtl_crypto.h

@@ -52,10 +52,10 @@
 
 #define CRYPTO_TFM_REQ_WEAK_KEY		0x00000100
 #define CRYPTO_TFM_RES_WEAK_KEY		0x00100000
-#define CRYPTO_TFM_RES_BAD_KEY_LEN   	0x00200000
-#define CRYPTO_TFM_RES_BAD_KEY_SCHED 	0x00400000
-#define CRYPTO_TFM_RES_BAD_BLOCK_LEN 	0x00800000
-#define CRYPTO_TFM_RES_BAD_FLAGS 	0x01000000
+#define CRYPTO_TFM_RES_BAD_KEY_LEN	0x00200000
+#define CRYPTO_TFM_RES_BAD_KEY_SCHED	0x00400000
+#define CRYPTO_TFM_RES_BAD_BLOCK_LEN	0x00800000
+#define CRYPTO_TFM_RES_BAD_FLAGS	0x01000000
 
 /*
  * Miscellaneous stuff.
@@ -396,4 +396,3 @@ void crypto_hmac(struct crypto_tfm *tfm, u8 *key, unsigned int *keylen,
 #endif	/* CONFIG_CRYPTO_HMAC */
 
 #endif	/* _LINUX_CRYPTO_H */
-

drivers/staging/rtl8192u/r8190_rtl8256.c

@@ -16,9 +16,9 @@
 #include "r8190_rtl8256.h"
 
 /*--------------------------------------------------------------------------
- * Overview:   	set RF band width (20M or 40M)
+ * Overview:	set RF band width (20M or 40M)
  * Input:       struct net_device*	dev
- * 		WIRELESS_BANDWIDTH_E	Bandwidth	//20M or 40M
+ *		WIRELESS_BANDWIDTH_E	Bandwidth	//20M or 40M
  * Output:      NONE
  * Return:      NONE
  * Note:	8226 support both 20M  and 40 MHz
@@ -106,16 +106,16 @@ void PHY_RF8256_Config(struct net_device* dev)
  *---------------------------------------------------------------------------*/
 void phy_RF8256_Config_ParaFile(struct net_device* dev)
 {
-	u32 	u4RegValue = 0;
+	u32	u4RegValue = 0;
 	//static s1Byte				szRadioAFile[] = RTL819X_PHY_RADIO_A;
 	//static s1Byte				szRadioBFile[] = RTL819X_PHY_RADIO_B;
 	//static s1Byte				szRadioCFile[] = RTL819X_PHY_RADIO_C;
 	//static s1Byte				szRadioDFile[] = RTL819X_PHY_RADIO_D;
-	u8 	eRFPath;
+	u8	eRFPath;
 	BB_REGISTER_DEFINITION_T	*pPhyReg;
 	struct r8192_priv *priv = ieee80211_priv(dev);
 	u32	RegOffSetToBeCheck = 0x3;
-	u32 	RegValueToBeCheck = 0x7f1;
+	u32	RegValueToBeCheck = 0x7f1;
 	u32	RF3_Final_Value = 0;
 	u8	ConstRetryTimes = 5, RetryTimes = 5;
 	u8 ret = 0;
@@ -152,7 +152,7 @@ void phy_RF8256_Config_ParaFile(struct net_device* dev)
 		rtl8192_setBBreg(dev, pPhyReg->rfintfo, bRFSI_RFENV, 0x1);
 
 		/* Set bit number of Address and Data for RF register */
-		rtl8192_setBBreg(dev, pPhyReg->rfHSSIPara2, b3WireAddressLength, 0x0); 	// Set 0 to 4 bits for Z-serial and set 1 to 6 bits for 8258
+		rtl8192_setBBreg(dev, pPhyReg->rfHSSIPara2, b3WireAddressLength, 0x0);	// Set 0 to 4 bits for Z-serial and set 1 to 6 bits for 8258
 		rtl8192_setBBreg(dev, pPhyReg->rfHSSIPara2, b3WireDataLength, 0x0);	// Set 0 to 12 bits for Z-serial and 8258, and set 1 to 14 bits for ???
 
 		rtl8192_phy_SetRFReg(dev, (RF90_RADIO_PATH_E) eRFPath, 0x0, bMask12Bits, 0xbf);
@@ -309,4 +309,3 @@ void PHY_SetRF8256OFDMTxPower(struct net_device* dev, u8 powerlevel)
 	return;
 
 }
-

drivers/staging/rtl8192u/r8192U.h

@@ -110,7 +110,7 @@ do { if(rt_global_debug_component & component) \
 #define COMP_RATE				BIT12	// For Rate Adaptive mechanism, 2006.07.02, by rcnjko.
 #define COMP_RM					BIT13	// For Radio Measurement.
 #define COMP_DIG				BIT14	// For DIG, 2006.09.25, by rcnjko.
-#define COMP_PHY	 			BIT15
+#define COMP_PHY				BIT15
 #define COMP_CH					BIT16	//channel setting debug
 #define COMP_TXAGC				BIT17	// For Tx power, 060928, by rcnjko.
 #define COMP_HIPWR				BIT18	// For High Power Mechanism, 060928, by rcnjko.
@@ -209,7 +209,7 @@ do { if(rt_global_debug_component & component) \
 #define IEEE80211_WATCH_DOG_TIME    2000
 #define		PHY_Beacon_RSSI_SLID_WIN_MAX		10
 //for txpowertracking by amy
-#define 	OFDM_Table_Length	19
+#define		OFDM_Table_Length	19
 #define	CCK_Table_length	12
 
 /* for rtl819x */
@@ -298,7 +298,7 @@ typedef struct _tx_desc_cmd_819x_usb {
 	u8	Reserved4;
 
         //DOWRD 2
-	u16 	TxBufferSize;
+	u16	TxBufferSize;
 	u16	Reserved5;
 
        //DWORD 3,4,5
@@ -391,7 +391,7 @@ typedef struct _rx_desc_819x_usb_aggr_subframe{
 	//DWORD 2
 	//u4Byte		Reserved3;
 	//DWORD 3
-	//u4Byte           	BufferAddress;
+	//u4Byte		BufferAddress;
 }rx_desc_819x_usb_aggr_subframe, *prx_desc_819x_usb_aggr_subframe;
 #endif
 
@@ -424,7 +424,7 @@ typedef struct rx_drvinfo_819x_usb{
 #define MAX_802_11_HEADER_LENGTH        (40 + MAX_FIRMWARE_INFORMATION_SIZE)
 #define ENCRYPTION_MAX_OVERHEAD		128
 #define	USB_HWDESC_HEADER_LEN		sizeof(tx_desc_819x_usb)
-#define TX_PACKET_SHIFT_BYTES 	  	(USB_HWDESC_HEADER_LEN + sizeof(tx_fwinfo_819x_usb))
+#define TX_PACKET_SHIFT_BYTES		(USB_HWDESC_HEADER_LEN + sizeof(tx_fwinfo_819x_usb))
 #define MAX_FRAGMENT_COUNT		8
 #ifdef RTL8192U
 #ifdef USB_TX_DRIVER_AGGREGATION_ENABLE
@@ -433,7 +433,7 @@ typedef struct rx_drvinfo_819x_usb{
 #define MAX_TRANSMIT_BUFFER_SIZE			8000
 #endif
 #else
-#define MAX_TRANSMIT_BUFFER_SIZE  	(1600+(MAX_802_11_HEADER_LENGTH+ENCRYPTION_MAX_OVERHEAD)*MAX_FRAGMENT_COUNT)
+#define MAX_TRANSMIT_BUFFER_SIZE	(1600+(MAX_802_11_HEADER_LENGTH+ENCRYPTION_MAX_OVERHEAD)*MAX_FRAGMENT_COUNT)
 #endif
 #ifdef USB_TX_DRIVER_AGGREGATION_ENABLE
 #define TX_PACKET_DRVAGGR_SUBFRAME_SHIFT_BYTES (sizeof(tx_desc_819x_usb_aggr_subframe) + sizeof(tx_fwinfo_819x_usb))
@@ -711,7 +711,7 @@ typedef struct Stats
 
 //+by amy 080507
 
-typedef struct 	ChnlAccessSetting {
+typedef struct	ChnlAccessSetting {
 	u16 SIFS_Timer;
 	u16 DIFS_Timer;
 	u16 SlotTimeTimer;
@@ -721,23 +721,23 @@ typedef struct 	ChnlAccessSetting {
 }*PCHANNEL_ACCESS_SETTING,CHANNEL_ACCESS_SETTING;
 
 typedef struct _BB_REGISTER_DEFINITION{
-	u32 rfintfs; 			// set software control: //		0x870~0x877[8 bytes]
-	u32 rfintfi; 			// readback data: //		0x8e0~0x8e7[8 bytes]
-	u32 rfintfo; 			// output data: //		0x860~0x86f [16 bytes]
-	u32 rfintfe; 			// output enable: //		0x860~0x86f [16 bytes]
-	u32 rf3wireOffset; 		// LSSI data: //		0x840~0x84f [16 bytes]
-	u32 rfLSSI_Select; 		// BB Band Select: //		0x878~0x87f [8 bytes]
+	u32 rfintfs;			// set software control: //		0x870~0x877[8 bytes]
+	u32 rfintfi;			// readback data: //		0x8e0~0x8e7[8 bytes]
+	u32 rfintfo;			// output data: //		0x860~0x86f [16 bytes]
+	u32 rfintfe;			// output enable: //		0x860~0x86f [16 bytes]
+	u32 rf3wireOffset;		// LSSI data: //		0x840~0x84f [16 bytes]
+	u32 rfLSSI_Select;		// BB Band Select: //		0x878~0x87f [8 bytes]
 	u32 rfTxGainStage;		// Tx gain stage: //		0x80c~0x80f [4 bytes]
-	u32 rfHSSIPara1; 		// wire parameter control1 : //		0x820~0x823,0x828~0x82b, 0x830~0x833, 0x838~0x83b [16 bytes]
-	u32 rfHSSIPara2; 		// wire parameter control2 : //		0x824~0x827,0x82c~0x82f, 0x834~0x837, 0x83c~0x83f [16 bytes]
-	u32 rfSwitchControl; 	//Tx Rx antenna control : //		0x858~0x85f [16 bytes]
-	u32 rfAGCControl1; 	//AGC parameter control1 : //		0xc50~0xc53,0xc58~0xc5b, 0xc60~0xc63, 0xc68~0xc6b [16 bytes]
-	u32 rfAGCControl2; 	//AGC parameter control2 : //		0xc54~0xc57,0xc5c~0xc5f, 0xc64~0xc67, 0xc6c~0xc6f [16 bytes]
-	u32 rfRxIQImbalance; 	//OFDM Rx IQ imbalance matrix : //		0xc14~0xc17,0xc1c~0xc1f, 0xc24~0xc27, 0xc2c~0xc2f [16 bytes]
-	u32 rfRxAFE;  			//Rx IQ DC ofset and Rx digital filter, Rx DC notch filter : //		0xc10~0xc13,0xc18~0xc1b, 0xc20~0xc23, 0xc28~0xc2b [16 bytes]
-	u32 rfTxIQImbalance; 	//OFDM Tx IQ imbalance matrix //		0xc80~0xc83,0xc88~0xc8b, 0xc90~0xc93, 0xc98~0xc9b [16 bytes]
-	u32 rfTxAFE; 			//Tx IQ DC Offset and Tx DFIR type //		0xc84~0xc87,0xc8c~0xc8f, 0xc94~0xc97, 0xc9c~0xc9f [16 bytes]
-	u32 rfLSSIReadBack; 	//LSSI RF readback data //		0x8a0~0x8af [16 bytes]
+	u32 rfHSSIPara1;		// wire parameter control1 : //		0x820~0x823,0x828~0x82b, 0x830~0x833, 0x838~0x83b [16 bytes]
+	u32 rfHSSIPara2;		// wire parameter control2 : //		0x824~0x827,0x82c~0x82f, 0x834~0x837, 0x83c~0x83f [16 bytes]
+	u32 rfSwitchControl;	//Tx Rx antenna control : //		0x858~0x85f [16 bytes]
+	u32 rfAGCControl1;	//AGC parameter control1 : //		0xc50~0xc53,0xc58~0xc5b, 0xc60~0xc63, 0xc68~0xc6b [16 bytes]
+	u32 rfAGCControl2;	//AGC parameter control2 : //		0xc54~0xc57,0xc5c~0xc5f, 0xc64~0xc67, 0xc6c~0xc6f [16 bytes]
+	u32 rfRxIQImbalance;	//OFDM Rx IQ imbalance matrix : //		0xc14~0xc17,0xc1c~0xc1f, 0xc24~0xc27, 0xc2c~0xc2f [16 bytes]
+	u32 rfRxAFE;			//Rx IQ DC ofset and Rx digital filter, Rx DC notch filter : //		0xc10~0xc13,0xc18~0xc1b, 0xc20~0xc23, 0xc28~0xc2b [16 bytes]
+	u32 rfTxIQImbalance;	//OFDM Tx IQ imbalance matrix //		0xc80~0xc83,0xc88~0xc8b, 0xc90~0xc93, 0xc98~0xc9b [16 bytes]
+	u32 rfTxAFE;			//Tx IQ DC Offset and Tx DFIR type //		0xc84~0xc87,0xc8c~0xc8f, 0xc94~0xc97, 0xc9c~0xc9f [16 bytes]
+	u32 rfLSSIReadBack;	//LSSI RF readback data //		0x8a0~0x8af [16 bytes]
 }BB_REGISTER_DEFINITION_T, *PBB_REGISTER_DEFINITION_T;
 
 typedef enum _RT_RF_TYPE_819xU{
@@ -1006,7 +1006,7 @@ typedef struct r8192_priv
 	u8 retry_rts;
 	u16 rts;
 
-	struct 	ChnlAccessSetting  ChannelAccessSetting;
+	struct	ChnlAccessSetting  ChannelAccessSetting;
 	struct work_struct reset_wq;
 
 /**********************************************************/
@@ -1014,7 +1014,7 @@ typedef struct r8192_priv
 	u16     basic_rate;
 	u8      short_preamble;
 	u8      slot_time;
-	bool 	bDcut;
+	bool	bDcut;
 	bool bCurrentRxAggrEnable;
 	u8 Rf_Mode; //add for Firmware RF -R/W switch
 	prt_firmware		pFirmware;
@@ -1050,7 +1050,7 @@ typedef struct r8192_priv
 
 	//for set channel
 	u8	SwChnlInProgress;
-	u8 	SwChnlStage;
+	u8	SwChnlStage;
 	u8	SwChnlStep;
 	u8	SetBWModeInProgress;
 	HT_CHANNEL_WIDTH		CurrentChannelBW;
@@ -1062,8 +1062,8 @@ typedef struct r8192_priv
 	// We save RF reg0 in this variable to reduce RF reading.
 	//
 	u32					RfReg0Value[4];
-	u8 					NumTotalRFPath;
-	bool 				brfpath_rxenable[4];
+	u8					NumTotalRFPath;
+	bool				brfpath_rxenable[4];
 	//RF set related
 	bool				SetRFPowerStateInProgress;
 //+by amy 080507
@@ -1104,7 +1104,7 @@ typedef struct r8192_priv
 	bool btxpower_tracking;
 	bool bcck_in_ch14;
 	bool btxpowerdata_readfromEEPORM;
-	u16 	TSSI_13dBm;
+	u16	TSSI_13dBm;
 	//For Backup Initial Gain
 	init_gain initgain_backup;
 	u8 DefaultInitialGain[4];
@@ -1114,17 +1114,17 @@ typedef struct r8192_priv
 	bool		bis_cur_rdlstate;
 	struct timer_list fsync_timer;
 	bool bfsync_processing;	// 500ms Fsync timer is active or not
-	u32 	rate_record;
-	u32 	rateCountDiffRecord;
+	u32	rate_record;
+	u32	rateCountDiffRecord;
 	u32	ContinueDiffCount;
 	bool bswitch_fsync;
 
 	u8	framesync;
-	u32 	framesyncC34;
-	u8   	framesyncMonitor;
-        	//Added by amy 080516  for RX related
-	u16 	nrxAMPDU_size;
-	u8 	nrxAMPDU_aggr_num;
+	u32	framesyncC34;
+	u8	framesyncMonitor;
+		//Added by amy 080516  for RX related
+	u16	nrxAMPDU_size;
+	u8	nrxAMPDU_aggr_num;
 
 	//by amy for gpio
 	 bool bHwRadioOff;
@@ -1204,7 +1204,7 @@ typedef enum{
 #ifdef JOHN_HWSEC
 struct ssid_thread {
 	struct net_device *dev;
-       	u8 name[IW_ESSID_MAX_SIZE + 1];
+	u8 name[IW_ESSID_MAX_SIZE + 1];
 };
 #endif
 

drivers/staging/rtl8192u/r8192U_core.c

@@ -80,9 +80,9 @@ double __extendsfdf2(float a) {return a;}
 #include "dot11d.h"
 //set here to open your trace code. //WB
 u32 rt_global_debug_component = \
-			//	COMP_INIT    	|
+			//	COMP_INIT	|
 //				COMP_DBG	|
-			//	COMP_EPROM   	|
+			//	COMP_EPROM	|
 //				COMP_PHY	|
 			//	COMP_RF		|
 //				COMP_FIRMWARE	|
@@ -159,7 +159,7 @@ static struct usb_driver rtl8192_usb_driver = {
 	.resume		= rtl8192_resume,                 /* PM resume fn  */
 #else
 	.suspend	= NULL,				  /* PM suspend fn */
-	.resume      	= NULL,				  /* PM resume fn  */
+	.resume		= NULL,				  /* PM resume fn  */
 #endif
 };
 
@@ -171,11 +171,11 @@ typedef struct _CHANNEL_LIST
 }CHANNEL_LIST, *PCHANNEL_LIST;
 
 static CHANNEL_LIST ChannelPlan[] = {
-	{{1,2,3,4,5,6,7,8,9,10,11,36,40,44,48,52,56,60,64,149,153,157,161,165},24},  		//FCC
-	{{1,2,3,4,5,6,7,8,9,10,11},11},                    				//IC
-	{{1,2,3,4,5,6,7,8,9,10,11,12,13,36,40,44,48,52,56,60,64},21},  	//ETSI
+	{{1,2,3,4,5,6,7,8,9,10,11,36,40,44,48,52,56,60,64,149,153,157,161,165},24},		//FCC
+	{{1,2,3,4,5,6,7,8,9,10,11},11},							//IC
+	{{1,2,3,4,5,6,7,8,9,10,11,12,13,36,40,44,48,52,56,60,64},21},	//ETSI
 	{{1,2,3,4,5,6,7,8,9,10,11,12,13},13},    //Spain. Change to ETSI.
-	{{1,2,3,4,5,6,7,8,9,10,11,12,13},13},  	//France. Change to ETSI.
+	{{1,2,3,4,5,6,7,8,9,10,11,12,13},13},	//France. Change to ETSI.
 	{{1,2,3,4,5,6,7,8,9,10,11,12,13,14,36,40,44,48,52,56,60,64},22},	//MKK					//MKK
 	{{1,2,3,4,5,6,7,8,9,10,11,12,13,14,36,40,44,48,52,56,60,64},22},//MKK1
 	{{1,2,3,4,5,6,7,8,9,10,11,12,13},13},	//Israel.
@@ -240,7 +240,7 @@ static void rtl819x_set_channel_map(u8 channel_plan, struct r8192_priv* priv)
 }
 
 
-#define 	rx_hal_is_cck_rate(_pdrvinfo)\
+#define		rx_hal_is_cck_rate(_pdrvinfo)\
 			(_pdrvinfo->RxRate == DESC90_RATE1M ||\
 			_pdrvinfo->RxRate == DESC90_RATE2M ||\
 			_pdrvinfo->RxRate == DESC90_RATE5_5M ||\
@@ -1272,8 +1272,8 @@ struct sk_buff *DrvAggr_Aggregation(struct net_device *dev, struct ieee80211_drv
 {
 	struct ieee80211_device *ieee = netdev_priv(dev);
 	struct r8192_priv *priv = ieee80211_priv(dev);
-	cb_desc 	*tcb_desc = NULL;
-	u8 		i;
+	cb_desc		*tcb_desc = NULL;
+	u8		i;
 	u32		TotalLength;
 	struct sk_buff	*skb;
 	struct sk_buff  *agg_skb;
@@ -1444,7 +1444,7 @@ u8 DrvAggr_GetAggregatibleList(struct net_device *dev, struct sk_buff *skb,
 	struct ieee80211_device *ieee = netdev_priv(dev);
 	PRT_HIGH_THROUGHPUT	pHTInfo = ieee->pHTInfo;
 	u16		nMaxAggrNum = pHTInfo->UsbTxAggrNum;
-	cb_desc 	*tcb_desc = (cb_desc *)(skb->cb + MAX_DEV_ADDR_SIZE);
+	cb_desc		*tcb_desc = (cb_desc *)(skb->cb + MAX_DEV_ADDR_SIZE);
 	u8		QueueID = tcb_desc->queue_index;
 
 	do {
@@ -1812,7 +1812,7 @@ short rtl819xU_tx_cmd(struct net_device *dev, struct sk_buff *skb)
 	int			status;
 	struct urb		*tx_urb;
 	//int			urb_buf_len;
-	unsigned int 		idx_pipe;
+	unsigned int		idx_pipe;
 	tx_desc_cmd_819x_usb *pdesc = (tx_desc_cmd_819x_usb *)skb->data;
 	cb_desc *tcb_desc = (cb_desc *)(skb->cb + MAX_DEV_ADDR_SIZE);
 	u8 queue_index = tcb_desc->queue_index;
@@ -2346,7 +2346,7 @@ void rtl8192_update_beacon(struct work_struct * work)
 {
         struct r8192_priv *priv = container_of(work, struct r8192_priv, update_beacon_wq.work);
         struct net_device *dev = priv->ieee80211->dev;
- 	struct ieee80211_device* ieee = priv->ieee80211;
+	struct ieee80211_device* ieee = priv->ieee80211;
 	struct ieee80211_network* net = &ieee->current_network;
 
 	if (ieee->pHTInfo->bCurrentHTSupport)
@@ -2717,7 +2717,7 @@ static void rtl8192_init_priv_variable(struct net_device* dev)
 	priv->bDisableNormalResetCheck = false;
 	priv->force_reset = false;
 
-	priv->ieee80211->FwRWRF = 0; 	//we don't use FW read/write RF until stable firmware is available.
+	priv->ieee80211->FwRWRF = 0;	//we don't use FW read/write RF until stable firmware is available.
 	priv->ieee80211->current_network.beacon_interval = DEFAULT_BEACONINTERVAL;
 	priv->ieee80211->iw_mode = IW_MODE_INFRA;
 	priv->ieee80211->softmac_features  = IEEE_SOFTMAC_SCAN |
@@ -2778,11 +2778,11 @@ static void rtl8192_init_priv_variable(struct net_device* dev)
 #ifdef TO_DO_LIST
 	if(Adapter->bInHctTest)
 		pHalData->ReceiveConfig	=	pHalData->CSMethod |
-						RCR_AMF | RCR_ADF |	//RCR_AAP | 	//accept management/data
+						RCR_AMF | RCR_ADF |	//RCR_AAP |	//accept management/data
 						//guangan200710
 						RCR_ACF |	//accept control frame for SW AP needs PS-poll, 2005.07.07, by rcnjko.
 						RCR_AB | RCR_AM | RCR_APM |		//accept BC/MC/UC
-						RCR_AICV | RCR_ACRC32 | 		//accept ICV/CRC error packet
+						RCR_AICV | RCR_ACRC32 |			//accept ICV/CRC error packet
 						((u32)7<<RCR_MXDMA_OFFSET) | // Max DMA Burst Size per Rx DMA Burst, 7: unlimited.
 						(pHalData->EarlyRxThreshold<<RCR_FIFO_OFFSET) | // Rx FIFO Threshold, 7: No Rx threshold.
 						(pHalData->EarlyRxThreshold == 7 ? RCR_OnlyErlPkt:0);
@@ -2793,7 +2793,7 @@ static void rtl8192_init_priv_variable(struct net_device* dev)
 		RCR_AMF | RCR_ADF |		//accept management/data
 		RCR_ACF |			//accept control frame for SW AP needs PS-poll, 2005.07.07, by rcnjko.
 		RCR_AB | RCR_AM | RCR_APM |	//accept BC/MC/UC
-		//RCR_AICV | RCR_ACRC32 | 	//accept ICV/CRC error packet
+		//RCR_AICV | RCR_ACRC32 |	//accept ICV/CRC error packet
 		((u32)7<<RCR_MXDMA_OFFSET)| // Max DMA Burst Size per Rx DMA Burst, 7: unlimited.
 		(priv->EarlyRxThreshold<<RX_FIFO_THRESHOLD_SHIFT) | // Rx FIFO Threshold, 7: No Rx threshold.
 		(priv->EarlyRxThreshold == 7 ? RCR_ONLYERLPKT:0);
@@ -3549,7 +3549,7 @@ HalTxCheckStuck819xUsb(
 	)
 {
 	struct r8192_priv *priv = ieee80211_priv(dev);
-	u16 		RegTxCounter = read_nic_word(dev, 0x128);
+	u16		RegTxCounter = read_nic_word(dev, 0x128);
 	bool		bStuck = FALSE;
 	RT_TRACE(COMP_RESET,"%s():RegTxCounter is %d,TxCounter is %d\n",__FUNCTION__,RegTxCounter,priv->TxCounter);
 	if(priv->TxCounter==RegTxCounter)
@@ -3583,14 +3583,14 @@ TxCheckStuck(struct net_device *dev)
 //	     spin_lock_irqsave(&priv->ieee80211->lock,flags);
 	     for (QueueID = 0; QueueID<=BEACON_QUEUE;QueueID ++)
 	     {
-	     		if(QueueID == TXCMD_QUEUE)
+			if(QueueID == TXCMD_QUEUE)
 		         continue;
 #ifdef USB_TX_DRIVER_AGGREGATION_ENABLE
 			if((skb_queue_len(&priv->ieee80211->skb_waitQ[QueueID]) == 0) && (skb_queue_len(&priv->ieee80211->skb_aggQ[QueueID]) == 0) && (skb_queue_len(&priv->ieee80211->skb_drv_aggQ[QueueID]) == 0))
 #else
-		     	if((skb_queue_len(&priv->ieee80211->skb_waitQ[QueueID]) == 0)  && (skb_queue_len(&priv->ieee80211->skb_aggQ[QueueID]) == 0))
+			if((skb_queue_len(&priv->ieee80211->skb_waitQ[QueueID]) == 0)  && (skb_queue_len(&priv->ieee80211->skb_aggQ[QueueID]) == 0))
 #endif
-			 	continue;
+				continue;
 
 	             bCheckFwTxCnt = true;
 	     }
@@ -3611,7 +3611,7 @@ TxCheckStuck(struct net_device *dev)
 bool
 HalRxCheckStuck819xUsb(struct net_device *dev)
 {
-	u16 	RegRxCounter = read_nic_word(dev, 0x130);
+	u16	RegRxCounter = read_nic_word(dev, 0x130);
 	struct r8192_priv *priv = ieee80211_priv(dev);
 	bool bStuck = FALSE;
 	static u8	rx_chk_cnt = 0;
@@ -3718,7 +3718,7 @@ rtl819x_ifcheck_resetornot(struct net_device *dev)
 	struct r8192_priv *priv = ieee80211_priv(dev);
 	RESET_TYPE	TxResetType = RESET_TYPE_NORESET;
 	RESET_TYPE	RxResetType = RESET_TYPE_NORESET;
-	RT_RF_POWER_STATE 	rfState;
+	RT_RF_POWER_STATE	rfState;
 
 	rfState = priv->ieee80211->eRFPowerState;
 
@@ -4006,18 +4006,18 @@ RESET_START:
 
 void CAM_read_entry(
 	struct net_device *dev,
-	u32	 		iIndex
+	u32			iIndex
 )
 {
- 	u32 target_command=0;
+	u32 target_command=0;
 	 u32 target_content=0;
 	 u8 entry_i=0;
 	 u32 ulStatus;
 	s32 i=100;
 //	printk("=======>start read CAM\n");
- 	for(entry_i=0;entry_i<CAM_CONTENT_COUNT;entry_i++)
- 	{
-   	// polling bit, and No Write enable, and address
+	for(entry_i=0;entry_i<CAM_CONTENT_COUNT;entry_i++)
+	{
+	// polling bit, and No Write enable, and address
 		target_command= entry_i+CAM_CONTENT_COUNT*iIndex;
 		target_command= target_command | BIT31;
 
@@ -4049,7 +4049,7 @@ void rtl819x_update_rxcounts(
 	u32* TotalRxDataNum
 )
 {
-	u16 			SlotIndex;
+	u16			SlotIndex;
 	u8			i;
 
 	*TotalRxBcnNum = 0;
@@ -4122,7 +4122,7 @@ extern	void	rtl819x_watchdog_wqcallback(struct work_struct *work)
 	//check if reset the driver
 	if(check_reset_cnt++ >= 3)
 	{
-    		ResetType = rtl819x_ifcheck_resetornot(dev);
+		ResetType = rtl819x_ifcheck_resetornot(dev);
 		check_reset_cnt = 3;
 		//DbgPrint("Start to check silent reset\n");
 	}
@@ -4418,10 +4418,10 @@ int rtl8192_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
 							setKey(	dev,
 								ipw->u.crypt.idx,
 								ipw->u.crypt.idx,		//KeyIndex
-						     		ieee->group_key_type,	//KeyType
-						            	broadcast_addr,	//MacAddr
+								ieee->group_key_type,	//KeyType
+								broadcast_addr,	//MacAddr
 								0,		//DefaultKey
-							      	key);		//KeyContent
+								key);		//KeyContent
 					}
 				}
 			}
@@ -4819,7 +4819,7 @@ rtl819x_evm_dbtopercentage(
 }
 //
 //	Description:
-// 	We want good-looking for signal strength/quality
+//	We want good-looking for signal strength/quality
 //	2007/7/19 01:09, by cosa.
 //
 long
@@ -5203,7 +5203,7 @@ void TranslateRxSignalStuff819xUsb(struct sk_buff *skb,
 * Overview:	Record the received data rate
 *
 * Input:
-* 	struct net_device *dev
+*	struct net_device *dev
 *	struct ieee80211_rx_stats *stats
 *
 * Output:
@@ -5581,7 +5581,7 @@ rtl819xusb_process_received_packet(
 	)
 {
 //	bool bfreerfd=false, bqueued=false;
-	u8* 	frame;
+	u8*	frame;
 	u16     frame_len=0;
 	struct r8192_priv *priv = ieee80211_priv(dev);
 //	u8			index = 0;
@@ -6007,7 +6007,7 @@ void setKey(	struct net_device *dev,
 	//		printk("setkey cam =%8x\n", read_cam(dev, i+6*EntryNo));
 		}
 		else if(i==1){//MAC
-			TargetContent = (u32)(*(MacAddr+2)) 	 |
+			TargetContent = (u32)(*(MacAddr+2))	 |
 					(u32)(*(MacAddr+3)) <<  8|
 					(u32)(*(MacAddr+4)) << 16|
 					(u32)(*(MacAddr+5)) << 24;

drivers/staging/rtl8192u/r8192U_dm.c

@@ -8,7 +8,7 @@ Abstract:
 	HW dynamic mechanism.
 
 Major Change History:
-	When      	Who				What
+	When		Who				What
 	----------	--------------- -------------------------------
 	2008-05-14	amy                     create version 0 porting from windows code.
 
@@ -25,9 +25,9 @@ Major Change History:
 // Indicate different AP vendor for IOT issue.
 //
 static u32 edca_setting_DL[HT_IOT_PEER_MAX] =
-		{ 0x5e4322, 	0x5e4322, 	0x5e4322, 	0x604322, 	0xa44f, 	0x5ea44f};
+		{ 0x5e4322,	0x5e4322,	0x5e4322,	0x604322,	0xa44f,		0x5ea44f};
 static u32 edca_setting_UL[HT_IOT_PEER_MAX] =
-		{ 0x5e4322, 	0xa44f, 	0x5e4322, 	0x604322, 	0x5ea44f, 	0x5ea44f};
+		{ 0x5e4322,	0xa44f,		0x5e4322,	0x604322,	0x5ea44f,	0x5ea44f};
 
 
 #define RTK_UL_EDCA 0xa44f
@@ -134,7 +134,7 @@ static	void dm_check_pbc_gpio(struct net_device *dev);
 
 // DM --> Check current RX RF path state
 static	void	dm_check_rx_path_selection(struct net_device *dev);
-static 	void dm_init_rxpath_selection(struct net_device *dev);
+static	void dm_init_rxpath_selection(struct net_device *dev);
 static	void dm_rxpath_sel_byrssi(struct net_device *dev);
 
 
@@ -259,7 +259,7 @@ extern  void    hal_dm_watchdog(struct net_device *dev)
 {
 	//struct r8192_priv *priv = ieee80211_priv(dev);
 
-	//static u8 	previous_bssid[6] ={0};
+	//static u8	previous_bssid[6] ={0};
 
 	/*Add by amy 2008/05/15 ,porting from windows code.*/
 	dm_check_rate_adaptive(dev);
@@ -315,21 +315,21 @@ extern void init_rate_adaptive(struct net_device * dev)
 	{
 		// 07/10/08 MH Modify for RA smooth scheme.
 		/* 2008/01/11 MH Modify 2T RATR table for different RSSI. 080515 porting by amy from windows code.*/
-		pra->upper_rssi_threshold_ratr		= 	0x8f0f0000;
-		pra->middle_rssi_threshold_ratr		= 	0x8f0ff000;
-		pra->low_rssi_threshold_ratr		= 	0x8f0ff001;
-		pra->low_rssi_threshold_ratr_40M	= 	0x8f0ff005;
-		pra->low_rssi_threshold_ratr_20M	= 	0x8f0ff001;
-		pra->ping_rssi_ratr	= 	0x0000000d;//cosa add for test
+		pra->upper_rssi_threshold_ratr		=	0x8f0f0000;
+		pra->middle_rssi_threshold_ratr		=	0x8f0ff000;
+		pra->low_rssi_threshold_ratr		=	0x8f0ff001;
+		pra->low_rssi_threshold_ratr_40M	=	0x8f0ff005;
+		pra->low_rssi_threshold_ratr_20M	=	0x8f0ff001;
+		pra->ping_rssi_ratr	=	0x0000000d;//cosa add for test
 	}
 	else if (priv->rf_type == RF_1T2R)
 	{
-		pra->upper_rssi_threshold_ratr		= 	0x000f0000;
-		pra->middle_rssi_threshold_ratr		= 	0x000ff000;
-		pra->low_rssi_threshold_ratr		= 	0x000ff001;
-		pra->low_rssi_threshold_ratr_40M	= 	0x000ff005;
-		pra->low_rssi_threshold_ratr_20M	= 	0x000ff001;
-		pra->ping_rssi_ratr	= 	0x0000000d;//cosa add for test
+		pra->upper_rssi_threshold_ratr		=	0x000f0000;
+		pra->middle_rssi_threshold_ratr		=	0x000ff000;
+		pra->low_rssi_threshold_ratr		=	0x000ff001;
+		pra->low_rssi_threshold_ratr_40M	=	0x000ff005;
+		pra->low_rssi_threshold_ratr_20M	=	0x000ff001;
+		pra->ping_rssi_ratr	=	0x0000000d;//cosa add for test
 	}
 
 }	// InitRateAdaptive
@@ -348,7 +348,7 @@ extern void init_rate_adaptive(struct net_device * dev)
  *
  * Revised History:
  *	When		Who		Remark
- *	05/26/08	amy 	Create version 0 porting from windows code.
+ *	05/26/08	amy	Create version 0 porting from windows code.
  *
  *---------------------------------------------------------------------------*/
 static void dm_check_rate_adaptive(struct net_device * dev)
@@ -413,14 +413,14 @@ static void dm_check_rate_adaptive(struct net_device * dev)
 		   to prevent jumping frequently. */
 		if (pra->ratr_state == DM_RATR_STA_HIGH)
 		{
-			HighRSSIThreshForRA 	= pra->high2low_rssi_thresh_for_ra;
+			HighRSSIThreshForRA	= pra->high2low_rssi_thresh_for_ra;
 			LowRSSIThreshForRA	= (priv->CurrentChannelBW != HT_CHANNEL_WIDTH_20)?
 					(pra->low_rssi_thresh_for_ra40M):(pra->low_rssi_thresh_for_ra20M);
 		}
 		else if (pra->ratr_state == DM_RATR_STA_LOW)
 		{
 			HighRSSIThreshForRA	= pra->high_rssi_thresh_for_ra;
-			LowRSSIThreshForRA 	= (priv->CurrentChannelBW != HT_CHANNEL_WIDTH_20)?
+			LowRSSIThreshForRA	= (priv->CurrentChannelBW != HT_CHANNEL_WIDTH_20)?
 					(pra->low2high_rssi_thresh_for_ra40M):(pra->low2high_rssi_thresh_for_ra20M);
 		}
 		else
@@ -599,7 +599,7 @@ static void dm_TXPowerTrackingCallback_TSSI(struct net_device * dev)
 	u32						Value;
 	u8						Pwr_Flag;
 	u16						Avg_TSSI_Meas, TSSI_13dBm, Avg_TSSI_Meas_from_driver=0;
-	//RT_STATUS 				rtStatus = RT_STATUS_SUCCESS;
+	//RT_STATUS				rtStatus = RT_STATUS_SUCCESS;
 	bool rtStatus = true;
 	u32						delta=0;
 
@@ -954,79 +954,79 @@ static void dm_InitializeTXPowerTracking_TSSI(struct net_device *dev)
 	struct r8192_priv *priv = ieee80211_priv(dev);
 
 	//Initial the Tx BB index and mapping value
-	priv->txbbgain_table[0].txbb_iq_amplifygain = 			12;
+	priv->txbbgain_table[0].txbb_iq_amplifygain =			12;
 	priv->txbbgain_table[0].txbbgain_value=0x7f8001fe;
-	priv->txbbgain_table[1].txbb_iq_amplifygain = 			11;
+	priv->txbbgain_table[1].txbb_iq_amplifygain =			11;
 	priv->txbbgain_table[1].txbbgain_value=0x788001e2;
-	priv->txbbgain_table[2].txbb_iq_amplifygain = 			10;
+	priv->txbbgain_table[2].txbb_iq_amplifygain =			10;
 	priv->txbbgain_table[2].txbbgain_value=0x71c001c7;
-	priv->txbbgain_table[3].txbb_iq_amplifygain = 			9;
+	priv->txbbgain_table[3].txbb_iq_amplifygain =			9;
 	priv->txbbgain_table[3].txbbgain_value=0x6b8001ae;
-	priv->txbbgain_table[4].txbb_iq_amplifygain = 		       8;
+	priv->txbbgain_table[4].txbb_iq_amplifygain =		       8;
 	priv->txbbgain_table[4].txbbgain_value=0x65400195;
-	priv->txbbgain_table[5].txbb_iq_amplifygain = 		       7;
+	priv->txbbgain_table[5].txbb_iq_amplifygain =		       7;
 	priv->txbbgain_table[5].txbbgain_value=0x5fc0017f;
-	priv->txbbgain_table[6].txbb_iq_amplifygain = 		       6;
+	priv->txbbgain_table[6].txbb_iq_amplifygain =		       6;
 	priv->txbbgain_table[6].txbbgain_value=0x5a400169;
-	priv->txbbgain_table[7].txbb_iq_amplifygain = 		       5;
+	priv->txbbgain_table[7].txbb_iq_amplifygain =		       5;
 	priv->txbbgain_table[7].txbbgain_value=0x55400155;
-	priv->txbbgain_table[8].txbb_iq_amplifygain = 		       4;
+	priv->txbbgain_table[8].txbb_iq_amplifygain =		       4;
 	priv->txbbgain_table[8].txbbgain_value=0x50800142;
-	priv->txbbgain_table[9].txbb_iq_amplifygain = 		       3;
+	priv->txbbgain_table[9].txbb_iq_amplifygain =		       3;
 	priv->txbbgain_table[9].txbbgain_value=0x4c000130;
-	priv->txbbgain_table[10].txbb_iq_amplifygain = 		       2;
+	priv->txbbgain_table[10].txbb_iq_amplifygain =		       2;
 	priv->txbbgain_table[10].txbbgain_value=0x47c0011f;
-	priv->txbbgain_table[11].txbb_iq_amplifygain = 		       1;
+	priv->txbbgain_table[11].txbb_iq_amplifygain =		       1;
 	priv->txbbgain_table[11].txbbgain_value=0x43c0010f;
-	priv->txbbgain_table[12].txbb_iq_amplifygain = 		       0;
+	priv->txbbgain_table[12].txbb_iq_amplifygain =		       0;
 	priv->txbbgain_table[12].txbbgain_value=0x40000100;
-	priv->txbbgain_table[13].txbb_iq_amplifygain = 		       -1;
+	priv->txbbgain_table[13].txbb_iq_amplifygain =		       -1;
 	priv->txbbgain_table[13].txbbgain_value=0x3c8000f2;
-	priv->txbbgain_table[14].txbb_iq_amplifygain = 		     -2;
+	priv->txbbgain_table[14].txbb_iq_amplifygain =		     -2;
 	priv->txbbgain_table[14].txbbgain_value=0x390000e4;
-	priv->txbbgain_table[15].txbb_iq_amplifygain = 		     -3;
+	priv->txbbgain_table[15].txbb_iq_amplifygain =		     -3;
 	priv->txbbgain_table[15].txbbgain_value=0x35c000d7;
-	priv->txbbgain_table[16].txbb_iq_amplifygain = 		     -4;
+	priv->txbbgain_table[16].txbb_iq_amplifygain =		     -4;
 	priv->txbbgain_table[16].txbbgain_value=0x32c000cb;
-	priv->txbbgain_table[17].txbb_iq_amplifygain = 		     -5;
+	priv->txbbgain_table[17].txbb_iq_amplifygain =		     -5;
 	priv->txbbgain_table[17].txbbgain_value=0x300000c0;
-	priv->txbbgain_table[18].txbb_iq_amplifygain = 			    -6;
+	priv->txbbgain_table[18].txbb_iq_amplifygain =			    -6;
 	priv->txbbgain_table[18].txbbgain_value=0x2d4000b5;
-	priv->txbbgain_table[19].txbb_iq_amplifygain = 		     -7;
+	priv->txbbgain_table[19].txbb_iq_amplifygain =		     -7;
 	priv->txbbgain_table[19].txbbgain_value=0x2ac000ab;
-	priv->txbbgain_table[20].txbb_iq_amplifygain = 		     -8;
+	priv->txbbgain_table[20].txbb_iq_amplifygain =		     -8;
 	priv->txbbgain_table[20].txbbgain_value=0x288000a2;
-	priv->txbbgain_table[21].txbb_iq_amplifygain = 		     -9;
+	priv->txbbgain_table[21].txbb_iq_amplifygain =		     -9;
 	priv->txbbgain_table[21].txbbgain_value=0x26000098;
-	priv->txbbgain_table[22].txbb_iq_amplifygain = 		     -10;
+	priv->txbbgain_table[22].txbb_iq_amplifygain =		     -10;
 	priv->txbbgain_table[22].txbbgain_value=0x24000090;
-	priv->txbbgain_table[23].txbb_iq_amplifygain = 		     -11;
+	priv->txbbgain_table[23].txbb_iq_amplifygain =		     -11;
 	priv->txbbgain_table[23].txbbgain_value=0x22000088;
-	priv->txbbgain_table[24].txbb_iq_amplifygain = 		     -12;
+	priv->txbbgain_table[24].txbb_iq_amplifygain =		     -12;
 	priv->txbbgain_table[24].txbbgain_value=0x20000080;
-	priv->txbbgain_table[25].txbb_iq_amplifygain = 		     -13;
+	priv->txbbgain_table[25].txbb_iq_amplifygain =		     -13;
 	priv->txbbgain_table[25].txbbgain_value=0x1a00006c;
-	priv->txbbgain_table[26].txbb_iq_amplifygain = 		     -14;
+	priv->txbbgain_table[26].txbb_iq_amplifygain =		     -14;
 	priv->txbbgain_table[26].txbbgain_value=0x1c800072;
-	priv->txbbgain_table[27].txbb_iq_amplifygain = 		     -15;
+	priv->txbbgain_table[27].txbb_iq_amplifygain =		     -15;
 	priv->txbbgain_table[27].txbbgain_value=0x18000060;
-	priv->txbbgain_table[28].txbb_iq_amplifygain = 		     -16;
+	priv->txbbgain_table[28].txbb_iq_amplifygain =		     -16;
 	priv->txbbgain_table[28].txbbgain_value=0x19800066;
-	priv->txbbgain_table[29].txbb_iq_amplifygain = 		     -17;
+	priv->txbbgain_table[29].txbb_iq_amplifygain =		     -17;
 	priv->txbbgain_table[29].txbbgain_value=0x15800056;
-	priv->txbbgain_table[30].txbb_iq_amplifygain = 		     -18;
+	priv->txbbgain_table[30].txbb_iq_amplifygain =		     -18;
 	priv->txbbgain_table[30].txbbgain_value=0x26c0005b;
-	priv->txbbgain_table[31].txbb_iq_amplifygain = 		     -19;
+	priv->txbbgain_table[31].txbb_iq_amplifygain =		     -19;
 	priv->txbbgain_table[31].txbbgain_value=0x14400051;
-	priv->txbbgain_table[32].txbb_iq_amplifygain = 		     -20;
+	priv->txbbgain_table[32].txbb_iq_amplifygain =		     -20;
 	priv->txbbgain_table[32].txbbgain_value=0x24400051;
-	priv->txbbgain_table[33].txbb_iq_amplifygain = 		     -21;
+	priv->txbbgain_table[33].txbb_iq_amplifygain =		     -21;
 	priv->txbbgain_table[33].txbbgain_value=0x1300004c;
-	priv->txbbgain_table[34].txbb_iq_amplifygain = 		     -22;
+	priv->txbbgain_table[34].txbb_iq_amplifygain =		     -22;
 	priv->txbbgain_table[34].txbbgain_value=0x12000048;
-	priv->txbbgain_table[35].txbb_iq_amplifygain = 		     -23;
+	priv->txbbgain_table[35].txbb_iq_amplifygain =		     -23;
 	priv->txbbgain_table[35].txbbgain_value=0x11000044;
-	priv->txbbgain_table[36].txbb_iq_amplifygain = 		     -24;
+	priv->txbbgain_table[36].txbb_iq_amplifygain =		     -24;
 	priv->txbbgain_table[36].txbbgain_value=0x10000040;
 
 	//ccktxbb_valuearray[0] is 0xA22 [1] is 0xA24 ...[7] is 0xA29
@@ -1505,7 +1505,7 @@ static void dm_CheckTXPowerTracking_TSSI(struct net_device *dev)
 static void dm_CheckTXPowerTracking_ThermalMeter(struct net_device *dev)
 {
 	struct r8192_priv *priv = ieee80211_priv(dev);
-	static u8 	TM_Trigger=0;
+	static u8	TM_Trigger=0;
 	//DbgPrint("dm_CheckTXPowerTracking() \n");
 	if(!priv->btxpower_tracking)
 		return;
@@ -1564,40 +1564,40 @@ static void dm_CCKTxPowerAdjust_TSSI(struct net_device *dev, bool  bInCH14)
 	TempVal = 0;
 	if(!bInCH14){
 		//Write 0xa22 0xa23
-		TempVal = 	priv->cck_txbbgain_table[priv->cck_present_attentuation].ccktxbb_valuearray[0] +
+		TempVal =	priv->cck_txbbgain_table[priv->cck_present_attentuation].ccktxbb_valuearray[0] +
 					(priv->cck_txbbgain_table[priv->cck_present_attentuation].ccktxbb_valuearray[1]<<8) ;
 
 		rtl8192_setBBreg(dev, rCCK0_TxFilter1,bMaskHWord, TempVal);
 		//Write 0xa24 ~ 0xa27
 		TempVal = 0;
-		TempVal = 	priv->cck_txbbgain_table[priv->cck_present_attentuation].ccktxbb_valuearray[2] +
+		TempVal =	priv->cck_txbbgain_table[priv->cck_present_attentuation].ccktxbb_valuearray[2] +
 					(priv->cck_txbbgain_table[priv->cck_present_attentuation].ccktxbb_valuearray[3]<<8) +
 					(priv->cck_txbbgain_table[priv->cck_present_attentuation].ccktxbb_valuearray[4]<<16 )+
 					(priv->cck_txbbgain_table[priv->cck_present_attentuation].ccktxbb_valuearray[5]<<24);
 		rtl8192_setBBreg(dev, rCCK0_TxFilter2,bMaskDWord, TempVal);
 		//Write 0xa28  0xa29
 		TempVal = 0;
-		TempVal = 	priv->cck_txbbgain_table[priv->cck_present_attentuation].ccktxbb_valuearray[6] +
+		TempVal =	priv->cck_txbbgain_table[priv->cck_present_attentuation].ccktxbb_valuearray[6] +
 					(priv->cck_txbbgain_table[priv->cck_present_attentuation].ccktxbb_valuearray[7]<<8) ;
 
 		rtl8192_setBBreg(dev, rCCK0_DebugPort,bMaskLWord, TempVal);
 	}
 	else
 	{
-		TempVal = 	priv->cck_txbbgain_ch14_table[priv->cck_present_attentuation].ccktxbb_valuearray[0] +
+		TempVal =	priv->cck_txbbgain_ch14_table[priv->cck_present_attentuation].ccktxbb_valuearray[0] +
 					(priv->cck_txbbgain_ch14_table[priv->cck_present_attentuation].ccktxbb_valuearray[1]<<8) ;
 
 		rtl8192_setBBreg(dev, rCCK0_TxFilter1,bMaskHWord, TempVal);
 		//Write 0xa24 ~ 0xa27
 		TempVal = 0;
-		TempVal = 	priv->cck_txbbgain_ch14_table[priv->cck_present_attentuation].ccktxbb_valuearray[2] +
+		TempVal =	priv->cck_txbbgain_ch14_table[priv->cck_present_attentuation].ccktxbb_valuearray[2] +
 					(priv->cck_txbbgain_ch14_table[priv->cck_present_attentuation].ccktxbb_valuearray[3]<<8) +
 					(priv->cck_txbbgain_ch14_table[priv->cck_present_attentuation].ccktxbb_valuearray[4]<<16 )+
 					(priv->cck_txbbgain_ch14_table[priv->cck_present_attentuation].ccktxbb_valuearray[5]<<24);
 		rtl8192_setBBreg(dev, rCCK0_TxFilter2,bMaskDWord, TempVal);
 		//Write 0xa28  0xa29
 		TempVal = 0;
-		TempVal = 	priv->cck_txbbgain_ch14_table[priv->cck_present_attentuation].ccktxbb_valuearray[6] +
+		TempVal =	priv->cck_txbbgain_ch14_table[priv->cck_present_attentuation].ccktxbb_valuearray[6] +
 					(priv->cck_txbbgain_ch14_table[priv->cck_present_attentuation].ccktxbb_valuearray[7]<<8) ;
 
 		rtl8192_setBBreg(dev, rCCK0_DebugPort,bMaskLWord, TempVal);
@@ -1615,14 +1615,14 @@ static void dm_CCKTxPowerAdjust_ThermalMeter(struct net_device *dev,	bool  bInCH
 	if(!bInCH14)
 	{
 		//Write 0xa22 0xa23
-		TempVal = 	CCKSwingTable_Ch1_Ch13[priv->CCK_index][0] +
+		TempVal =	CCKSwingTable_Ch1_Ch13[priv->CCK_index][0] +
 					(CCKSwingTable_Ch1_Ch13[priv->CCK_index][1]<<8) ;
 		rtl8192_setBBreg(dev, rCCK0_TxFilter1, bMaskHWord, TempVal);
 		RT_TRACE(COMP_POWER_TRACKING, "CCK not chnl 14, reg 0x%x = 0x%x\n",
 			rCCK0_TxFilter1, TempVal);
 		//Write 0xa24 ~ 0xa27
 		TempVal = 0;
-		TempVal = 	CCKSwingTable_Ch1_Ch13[priv->CCK_index][2] +
+		TempVal =	CCKSwingTable_Ch1_Ch13[priv->CCK_index][2] +
 					(CCKSwingTable_Ch1_Ch13[priv->CCK_index][3]<<8) +
 					(CCKSwingTable_Ch1_Ch13[priv->CCK_index][4]<<16 )+
 					(CCKSwingTable_Ch1_Ch13[priv->CCK_index][5]<<24);
@@ -1631,7 +1631,7 @@ static void dm_CCKTxPowerAdjust_ThermalMeter(struct net_device *dev,	bool  bInCH
 			rCCK0_TxFilter2, TempVal);
 		//Write 0xa28  0xa29
 		TempVal = 0;
-		TempVal = 	CCKSwingTable_Ch1_Ch13[priv->CCK_index][6] +
+		TempVal =	CCKSwingTable_Ch1_Ch13[priv->CCK_index][6] +
 					(CCKSwingTable_Ch1_Ch13[priv->CCK_index][7]<<8) ;
 
 		rtl8192_setBBreg(dev, rCCK0_DebugPort, bMaskLWord, TempVal);
@@ -1642,7 +1642,7 @@ static void dm_CCKTxPowerAdjust_ThermalMeter(struct net_device *dev,	bool  bInCH
 	{
 //		priv->CCKTxPowerAdjustCntNotCh14++;	//cosa add for debug.
 		//Write 0xa22 0xa23
-		TempVal = 	CCKSwingTable_Ch14[priv->CCK_index][0] +
+		TempVal =	CCKSwingTable_Ch14[priv->CCK_index][0] +
 					(CCKSwingTable_Ch14[priv->CCK_index][1]<<8) ;
 
 		rtl8192_setBBreg(dev, rCCK0_TxFilter1, bMaskHWord, TempVal);
@@ -1650,7 +1650,7 @@ static void dm_CCKTxPowerAdjust_ThermalMeter(struct net_device *dev,	bool  bInCH
 			rCCK0_TxFilter1, TempVal);
 		//Write 0xa24 ~ 0xa27
 		TempVal = 0;
-		TempVal = 	CCKSwingTable_Ch14[priv->CCK_index][2] +
+		TempVal =	CCKSwingTable_Ch14[priv->CCK_index][2] +
 					(CCKSwingTable_Ch14[priv->CCK_index][3]<<8) +
 					(CCKSwingTable_Ch14[priv->CCK_index][4]<<16 )+
 					(CCKSwingTable_Ch14[priv->CCK_index][5]<<24);
@@ -1659,7 +1659,7 @@ static void dm_CCKTxPowerAdjust_ThermalMeter(struct net_device *dev,	bool  bInCH
 			rCCK0_TxFilter2, TempVal);
 		//Write 0xa28  0xa29
 		TempVal = 0;
-		TempVal = 	CCKSwingTable_Ch14[priv->CCK_index][6] +
+		TempVal =	CCKSwingTable_Ch14[priv->CCK_index][6] +
 					(CCKSwingTable_Ch14[priv->CCK_index][7]<<8) ;
 
 		rtl8192_setBBreg(dev, rCCK0_DebugPort, bMaskLWord, TempVal);
@@ -1713,7 +1713,7 @@ static void dm_txpower_reset_recovery(
 extern void dm_restore_dynamic_mechanism_state(struct net_device *dev)
 {
 	struct r8192_priv *priv = ieee80211_priv(dev);
-	u32 	reg_ratr = priv->rate_adaptive.last_ratr;
+	u32	reg_ratr = priv->rate_adaptive.last_ratr;
 
 	if(!priv->up)
 	{
@@ -1934,7 +1934,7 @@ dm_change_rxpath_selection_setting(
 	s32		DM_Value)
 {
 	struct r8192_priv *priv = ieee80211_priv(dev);
-	prate_adaptive 	pRA = (prate_adaptive)&(priv->rate_adaptive);
+	prate_adaptive	pRA = (prate_adaptive)&(priv->rate_adaptive);
 
 
 	if(DM_Type == 0)
@@ -2036,8 +2036,8 @@ static void dm_dig_init(struct net_device *dev)
 	dm_digtable.dig_highpwr_state	= DM_STA_DIG_MAX;
 	dm_digtable.initialgain_lowerbound_state = false;
 
-	dm_digtable.rssi_low_thresh 	= DM_DIG_THRESH_LOW;
-	dm_digtable.rssi_high_thresh 	= DM_DIG_THRESH_HIGH;
+	dm_digtable.rssi_low_thresh	= DM_DIG_THRESH_LOW;
+	dm_digtable.rssi_high_thresh	= DM_DIG_THRESH_HIGH;
 
 	dm_digtable.rssi_high_power_lowthresh = DM_DIG_HIGH_PWR_THRESH_LOW;
 	dm_digtable.rssi_high_power_highthresh = DM_DIG_HIGH_PWR_THRESH_HIGH;
@@ -2091,7 +2091,7 @@ static void dm_ctrl_initgain_byrssi_by_driverrssi(
 {
 	struct r8192_priv *priv = ieee80211_priv(dev);
 	u8 i;
-	static u8 	fw_dig=0;
+	static u8	fw_dig=0;
 
 	if (dm_digtable.dig_enable_flag == false)
 		return;
@@ -2871,7 +2871,7 @@ static void dm_check_rfctrl_gpio(struct net_device * dev)
  *
  * Revised History:
  *	When		Who		Remark
- *	05/28/2008	amy 	Create Version 0 porting from windows code.
+ *	05/28/2008	amy	Create Version 0 porting from windows code.
  *
  *---------------------------------------------------------------------------*/
 static	void	dm_check_pbc_gpio(struct net_device *dev)
@@ -3517,8 +3517,8 @@ static void dm_EndSWFsync(struct net_device *dev)
 static void dm_StartSWFsync(struct net_device *dev)
 {
 	struct r8192_priv *priv = ieee80211_priv(dev);
-	u32 			rateIndex;
-	u32 			rateBitmap;
+	u32			rateIndex;
+	u32			rateBitmap;
 
 	RT_TRACE(COMP_HALDM,"%s\n", __FUNCTION__);
 	// Initial rate record to zero, start to record.
@@ -3569,7 +3569,7 @@ void dm_check_fsync(struct net_device *dev)
 #define	RegC38_NonFsync_Other_AP	1
 #define	RegC38_Fsync_AP_BCM		2
 	struct r8192_priv *priv = ieee80211_priv(dev);
-	//u32 			framesyncC34;
+	//u32			framesyncC34;
 	static u8		reg_c38_State=RegC38_Default;
 	static u32	reset_cnt=0;
 
@@ -3887,4 +3887,3 @@ static void dm_send_rssi_tofw(struct net_device *dev)
 }
 
 /*---------------------------Define function prototype------------------------*/
-

drivers/staging/rtl8192u/r8192U_dm.h

@@ -13,7 +13,7 @@
  *
  * History:
  *	Data		Who		Remark
- *	10/04/2007  MHC    	Create initial version.
+ *	10/04/2007  MHC		Create initial version.
  *
  *****************************************************************************/
  /* Check to see if the file has been included already.  */
@@ -55,12 +55,12 @@
 #define		TX_POWER_NEAR_FIELD_THRESH_LOW		62
 //added by amy for atheros AP
 #define         TX_POWER_ATHEROAP_THRESH_HIGH           78
-#define 	TX_POWER_ATHEROAP_THRESH_LOW		72
+#define		TX_POWER_ATHEROAP_THRESH_LOW		72
 
 //defined by vivi, for showing on UI
-#define 		Current_Tx_Rate_Reg         0x1b8
-#define 		Initial_Tx_Rate_Reg         	  0x1b9
-#define 		Tx_Retry_Count_Reg         0x1ac
+#define			Current_Tx_Rate_Reg         0x1b8
+#define			Initial_Tx_Rate_Reg		  0x1b9
+#define			Tx_Retry_Count_Reg         0x1ac
 #define		RegC38_TH				 20
 /*--------------------------Define Parameters-------------------------------*/
 
@@ -132,8 +132,8 @@ typedef enum tag_dynamic_init_gain_operation_type_definition
 	DIG_TYPE_PWDB_FACTOR			= 8,
 	DIG_TYPE_RX_GAIN_MIN				= 9,
 	DIG_TYPE_RX_GAIN_MAX				= 10,
-	DIG_TYPE_ENABLE 		= 20,
-	DIG_TYPE_DISABLE 		= 30,
+	DIG_TYPE_ENABLE			= 20,
+	DIG_TYPE_DISABLE		= 30,
 	DIG_OP_TYPE_MAX
 }dm_dig_op_e;
 
@@ -251,4 +251,3 @@ extern void dm_initialize_txpower_tracking(struct net_device *dev);
 
 
 /* End of r8192U_dm.h */
-

drivers/staging/rtl8192u/r8192U_hw.h

@@ -122,7 +122,7 @@ enum _RTL8192Usb_HW {
 	SIFS			= 0x03E, // SIFS register
 	TCR			= 0x040, // Transmit Configuration Register
 
-#define TCR_MXDMA_2048 		7
+#define TCR_MXDMA_2048		7
 #define TCR_LRL_OFFSET		0
 #define TCR_SRL_OFFSET		8
 #define TCR_MXDMA_OFFSET	21
@@ -379,7 +379,7 @@ enum _RTL8192Usb_HW {
 //	IMR_POLL		= 0x360,
 	MacBlkCtrl		= 0x403, // Mac block on/off control register
 
-	EPROM_CMD 		= 0xfe58,
+	EPROM_CMD		= 0xfe58,
 #define Cmd9346CR_9356SEL	(1<<4)
 #define EPROM_CMD_RESERVED_MASK (1<<5)
 #define EPROM_CMD_OPERATING_MODE_SHIFT 6
@@ -392,12 +392,12 @@ enum _RTL8192Usb_HW {
 #define EPROM_CK_SHIFT 2
 #define EPROM_W_SHIFT 1
 #define EPROM_R_SHIFT 0
-	MAC0 			= 0x000,
-	MAC1 			= 0x001,
-	MAC2 			= 0x002,
-	MAC3 			= 0x003,
-	MAC4 			= 0x004,
-	MAC5 			= 0x005,
+	MAC0			= 0x000,
+	MAC1			= 0x001,
+	MAC2			= 0x002,
+	MAC3			= 0x003,
+	MAC4			= 0x004,
+	MAC5			= 0x005,
 
 };
 //----------------------------------------------------------------------------

drivers/staging/rtl8192u/r8192U_wx.c

@@ -1021,7 +1021,7 @@ static int dummy(struct net_device *dev, struct iw_request_info *a,
 static iw_handler r8192_wx_handlers[] =
 {
 	NULL,                     /* SIOCSIWCOMMIT */
-	r8192_wx_get_name,   	  /* SIOCGIWNAME */
+	r8192_wx_get_name,	  /* SIOCGIWNAME */
 	dummy,                    /* SIOCSIWNWID */
 	dummy,                    /* SIOCGIWNWID */
 	r8192_wx_set_freq,        /* SIOCSIWFREQ */
@@ -1040,7 +1040,7 @@ static iw_handler r8192_wx_handlers[] =
 	dummy,                    /* SIOCGIWSPY */
 	NULL,                     /* SIOCGIWTHRSPY */
 	NULL,                     /* SIOCWIWTHRSPY */
-	r8192_wx_set_wap,      	  /* SIOCSIWAP */
+	r8192_wx_set_wap,	  /* SIOCSIWAP */
 	r8192_wx_get_wap,         /* SIOCGIWAP */
 #if (WIRELESS_EXT >= 18)
 	r8192_wx_set_mlme,                     /* MLME-- */
@@ -1071,23 +1071,23 @@ static iw_handler r8192_wx_handlers[] =
 	r8192_wx_set_power,                    /* SIOCSIWPOWER */
 	r8192_wx_get_power,                    /* SIOCGIWPOWER */
 	NULL,			/*---hole---*/
-	NULL, 			/*---hole---*/
-	r8192_wx_set_gen_ie,//NULL, 			/* SIOCSIWGENIE */
-	NULL, 			/* SIOCSIWGENIE */
+	NULL,			/*---hole---*/
+	r8192_wx_set_gen_ie,//NULL,			/* SIOCSIWGENIE */
+	NULL,			/* SIOCSIWGENIE */
 
 #if (WIRELESS_EXT >= 18)
-	r8192_wx_set_auth,//NULL, 			/* SIOCSIWAUTH */
-	NULL,//r8192_wx_get_auth,//NULL, 			/* SIOCSIWAUTH */
-	r8192_wx_set_enc_ext, 			/* SIOCSIWENCODEEXT */
-	NULL,//r8192_wx_get_enc_ext,//NULL, 			/* SIOCSIWENCODEEXT */
+	r8192_wx_set_auth,//NULL,			/* SIOCSIWAUTH */
+	NULL,//r8192_wx_get_auth,//NULL,			/* SIOCSIWAUTH */
+	r8192_wx_set_enc_ext,			/* SIOCSIWENCODEEXT */
+	NULL,//r8192_wx_get_enc_ext,//NULL,			/* SIOCSIWENCODEEXT */
 #else
 	NULL,
 	NULL,
 	NULL,
 	NULL,
 #endif
-	NULL, 			/* SIOCSIWPMKSA */
-	NULL, 			 /*---hole---*/
+	NULL,			/* SIOCSIWPMKSA */
+	NULL,			 /*---hole---*/
 
 };
 

drivers/staging/rtl8192u/r819xU_HTGen.h

@@ -10,4 +10,3 @@ typedef enum _HT_IOT_ACTION{
 	HT_IOT_ACT_CDD_FSYNC = 0x00000020,
 	HT_IOT_ACT_PURE_N_MODE = 0x00000040,
 }HT_IOT_ACTION_E, *PHT_IOT_ACTION_E;
-

drivers/staging/rtl8192u/r819xU_HTType.h

@@ -89,7 +89,7 @@ typedef enum _CHNLOP{
 
 typedef enum _HT_ACTION{
 	ACT_RECOMMAND_WIDTH		= 0,
-	ACT_MIMO_PWR_SAVE 		= 1,
+	ACT_MIMO_PWR_SAVE		= 1,
 	ACT_PSMP					= 2,
 	ACT_SET_PCO_PHASE		= 3,
 	ACT_MIMO_CHL_MEASURE	= 4,
@@ -367,9 +367,9 @@ typedef struct _BSS_HT{
 typedef struct _MIMO_RSSI{
 	u32	EnableAntenna;
 	u32	AntennaA;
-	u32 	AntennaB;
-	u32 	AntennaC;
-	u32 	AntennaD;
+	u32	AntennaB;
+	u32	AntennaC;
+	u32	AntennaD;
 	u32	Average;
 }MIMO_RSSI, *PMIMO_RSSI;
 
@@ -388,4 +388,3 @@ typedef struct _FALSE_ALARM_STATISTICS{
 
 
 #endif //__INC_HTTYPE_H
-

drivers/staging/rtl8192u/r819xU_cmdpkt.c

@@ -18,7 +18,7 @@
  History:
 	Data		Who		Remark
 
-	05/06/2008  amy    	Create initial version porting from windows driver.
+	05/06/2008  amy		Create initial version porting from windows driver.
 
 ******************************************************************************/
 #include "r8192U.h"
@@ -41,7 +41,7 @@
 rt_status
 SendTxCommandPacket(
 	struct net_device *dev,
-	void* 			pData,
+	void*			pData,
 	u32				DataLen
 	)
 {
@@ -106,7 +106,7 @@ SendTxCommandPacket(
 	u32	buffer_len)
 {
 
-	bool 	    rt_status = true;
+	bool	    rt_status = true;
 #ifdef RTL8192U
 	return rt_status;
 #else
@@ -188,7 +188,7 @@ SendTxCommandPacket(
  *
  * Overview:
  *
- * Input:       PADAPTER 	pAdapter		-	.
+ * Input:       PADAPTER	pAdapter		-	.
  *				CMPK_TXFB_T *psTx_FB	-	.
  *
  * Output:      NONE
@@ -197,7 +197,7 @@ SendTxCommandPacket(
  *
  * Revised History:
  *  When		Who		Remark
- *  05/12/2008	amy 	Create Version 0 porting from windows code.
+ *  05/12/2008	amy	Create Version 0 porting from windows code.
  *
  *---------------------------------------------------------------------------*/
 static	void
@@ -289,7 +289,7 @@ cmpk_count_txstatistic(
  *				in the command packet.
  *
  * Input:       struct net_device *    dev
- *				u8 	*	pmsg		-	Msg Ptr of the command packet.
+ *				u8	*	pmsg		-	Msg Ptr of the command packet.
  *
  * Output:      NONE
  *
@@ -369,7 +369,7 @@ cmdpkt_beacontimerinterrupt_819xusb(
  * Overview:    The function is responsible for extract the message from
  *				firmware. It will contain dedicated info in
  *				ws-07-0063-v06-rtl819x-command-packet-specification-070315.doc.
- * 				Please refer to chapter "Interrupt Status Element".
+ *				Please refer to chapter "Interrupt Status Element".
  *
  * Input:       struct net_device *dev,
  *			u8*	pmsg		-	Message Pointer of the command packet.
@@ -400,8 +400,8 @@ cmpk_handle_interrupt_status(
 	/* It seems that FW use big endian(MIPS) and DRV use little endian in
 	   windows OS. So we have to read the content byte by byte or transfer
 	   endian type before copy the message copy. */
-	//rx_bcn_state.Element_ID 	= pMsg[0];
-	//rx_bcn_state.Length 		= pMsg[1];
+	//rx_bcn_state.Element_ID	= pMsg[0];
+	//rx_bcn_state.Length		= pMsg[1];
 	rx_intr_status.length = pmsg[1];
 	if (rx_intr_status.length != (sizeof(cmpk_intr_sta_t) - 2))
 	{
@@ -478,16 +478,16 @@ cmpk_handle_query_config_rx(
 	/* It seems that FW use big endian(MIPS) and DRV use little endian in
 	   windows OS. So we have to read the content byte by byte or transfer
 	   endian type before copy the message copy. */
-	//rx_query_cfg.Element_ID 	= pMsg[0];
-	//rx_query_cfg.Length 		= pMsg[1];
-	rx_query_cfg.cfg_action 	= (pmsg[4] & 0x80000000)>>31;
-	rx_query_cfg.cfg_type 		= (pmsg[4] & 0x60) >> 5;
-	rx_query_cfg.cfg_size 		= (pmsg[4] & 0x18) >> 3;
-	rx_query_cfg.cfg_page 		= (pmsg[6] & 0x0F) >> 0;
-	rx_query_cfg.cfg_offset 		= pmsg[7];
-	rx_query_cfg.value 			= (pmsg[8] << 24) | (pmsg[9] << 16) |
+	//rx_query_cfg.Element_ID	= pMsg[0];
+	//rx_query_cfg.Length		= pMsg[1];
+	rx_query_cfg.cfg_action		= (pmsg[4] & 0x80000000)>>31;
+	rx_query_cfg.cfg_type		= (pmsg[4] & 0x60) >> 5;
+	rx_query_cfg.cfg_size		= (pmsg[4] & 0x18) >> 3;
+	rx_query_cfg.cfg_page		= (pmsg[6] & 0x0F) >> 0;
+	rx_query_cfg.cfg_offset			= pmsg[7];
+	rx_query_cfg.value			= (pmsg[8] << 24) | (pmsg[9] << 16) |
 								  (pmsg[10] << 8) | (pmsg[11] << 0);
-	rx_query_cfg.mask 			= (pmsg[12] << 24) | (pmsg[13] << 16) |
+	rx_query_cfg.mask			= (pmsg[12] << 24) | (pmsg[13] << 16) |
 								  (pmsg[14] << 8) | (pmsg[15] << 0);
 
 }	/* cmpk_Handle_Query_Config_Rx */
@@ -511,7 +511,7 @@ cmpk_handle_query_config_rx(
  *
  *---------------------------------------------------------------------------*/
 static	void	cmpk_count_tx_status(	struct net_device *dev,
-									cmpk_tx_status_t 	*pstx_status)
+									cmpk_tx_status_t	*pstx_status)
 {
 	struct r8192_priv *priv = ieee80211_priv(dev);
 

drivers/staging/rtl8192u/r819xU_cmdpkt.h

@@ -72,7 +72,7 @@ typedef struct tag_cmd_pkt_set_configuration
 	u8	element_id;			/* Command packet type. */
 	u8	length;				/* Command packet length. */
 	u16	reserve1;			/* */
-	u8 	cfg_reserve1:3;
+	u8	cfg_reserve1:3;
 	u8	cfg_size:2;			/* Configuration info. */
 	u8	cfg_type:2;			/* Configuration info. */
 	u8	cfg_action:1;		/* Configuration info. */
@@ -94,20 +94,20 @@ typedef struct tag_tx_stats_feedback // PJ quick rxcmd 09042007
 	// For endian transfer --> Driver will not the same as firmware structure.
 	// DW 0
 	u16	reserve1;
-	u8 	length;				// Command packet length
-	u8 	element_id;			// Command packet type
+	u8	length;				// Command packet length
+	u8	element_id;			// Command packet type
 
 	// DW 1
 	u16	txfail;				// Tx Fail count
-	u16 	txok;				// Tx ok count
+	u16	txok;				// Tx ok count
 
 	// DW 2
-	u16	txmcok;  			// tx multicast
-	u16 	txretry;			// Tx Retry count
+	u16	txmcok;				// tx multicast
+	u16	txretry;			// Tx Retry count
 
 	// DW 3
 	u16  txucok;				// tx unicast
-	u16	txbcok;  			// tx broadcast
+	u16	txbcok;				// tx broadcast
 
 	// DW 4
 	u16	txbcfail;			//
@@ -135,8 +135,8 @@ typedef struct tag_rx_debug_message_feedback
 	// For endian transfer --> for driver
 	// DW 0
 	u16	reserve1;
-	u8 	length;				// Command packet length
-	u8 	element_id;			// Command packet type
+	u8	length;				// Command packet length
+	u8	element_id;			// Command packet type
 
 	// DW 1-??
 	// Variable debug message.
@@ -148,15 +148,15 @@ typedef struct tag_tx_rate_history
 {
 	// For endian transfer --> for driver
 	// DW 0
-	u8 	element_id;			// Command packet type
-	u8 	length;				// Command packet length
+	u8	element_id;			// Command packet type
+	u8	length;				// Command packet length
 	u16	reserved1;
 
 	// DW 1-2	CCK rate counter
-	u16 	cck[4];
+	u16	cck[4];
 
 	// DW 3-6
-	u16 	ofdm[8];
+	u16	ofdm[8];
 
 	// DW 7-14
 	//UINT16	MCS_BW0_SG0[16];

drivers/staging/rtl8192u/r819xU_firmware.c

@@ -2,7 +2,7 @@
  * Procedure:    Init boot code/firmware code/data session
  *
  * Description: This routine will initialize firmware. If any error occurs during the initialization
- * 		process, the routine shall terminate immediately and return fail.
+ *		process, the routine shall terminate immediately and return fail.
  *		NIC driver should call NdisOpenFile only from MiniportInitialize.
  *
  * Arguments:   The pointer of the adapter
@@ -19,7 +19,7 @@
 #include <linux/firmware.h>
 void firmware_init_param(struct net_device *dev)
 {
-	struct r8192_priv 	*priv = ieee80211_priv(dev);
+	struct r8192_priv	*priv = ieee80211_priv(dev);
 	rt_firmware		*pfirmware = priv->pFirmware;
 
 	pfirmware->cmdpacket_frag_thresold = GET_COMMAND_PACKET_FRAG_THRESHOLD(MAX_TRANSMIT_BUFFER_SIZE);
@@ -32,7 +32,7 @@ void firmware_init_param(struct net_device *dev)
 bool fw_download_code(struct net_device *dev, u8 *code_virtual_address, u32 buffer_len)
 {
 	struct r8192_priv   *priv = ieee80211_priv(dev);
-	bool 		    rt_status = true;
+	bool		    rt_status = true;
 	u16		    frag_threshold;
 	u16		    frag_length, frag_offset = 0;
 	//u16		    total_size;
@@ -241,17 +241,17 @@ CPUCheckFirmwareReady_Fail:
 
 bool init_firmware(struct net_device *dev)
 {
-	struct r8192_priv 	*priv = ieee80211_priv(dev);
+	struct r8192_priv	*priv = ieee80211_priv(dev);
 	bool			rt_status = TRUE;
 
 	u32			file_length = 0;
 	u8			*mapped_file = NULL;
 	u32			init_step = 0;
 	opt_rst_type_e	rst_opt = OPT_SYSTEM_RESET;
-	firmware_init_step_e 	starting_state = FW_INIT_STEP0_BOOT;
+	firmware_init_step_e	starting_state = FW_INIT_STEP0_BOOT;
 
 	rt_firmware		*pfirmware = priv->pFirmware;
-	const struct firmware 	*fw_entry;
+	const struct firmware	*fw_entry;
 	const char *fw_name[3] = { "RTL8192U/boot.img",
 			   "RTL8192U/main.img",
 			   "RTL8192U/data.img"};
@@ -402,4 +402,3 @@ download_firmware_fail:
 MODULE_FIRMWARE("RTL8192U/boot.img");
 MODULE_FIRMWARE("RTL8192U/main.img");
 MODULE_FIRMWARE("RTL8192U/data.img");
-

drivers/staging/rtl8192u/r819xU_firmware.h

@@ -24,4 +24,3 @@ typedef enum _opt_rst_type{
 }opt_rst_type_e;
 
 #endif
-

drivers/staging/rtl8192u/r819xU_phy.c

@@ -124,10 +124,10 @@ static void phy_FwRFSerialWrite( struct net_device* dev, RF90_RADIO_PATH_E
 /******************************************************************************
  *function:  This function read register from RF chip
  *   input:  net_device dev
- *   	     RF90_RADIO_PATH_E eRFPath //radio path of A/B/C/D
+ *	     RF90_RADIO_PATH_E eRFPath //radio path of A/B/C/D
  *           u32	Offset     //target address to be read
  *  output:  none
- *  return:  u32 	readback value
+ *  return:  u32	readback value
  *  notice:  There are three types of serial operations:(1) Software serial write.(2)Hardware LSSI-Low Speed Serial Interface.(3)Hardware HSSI-High speed serial write. Driver here need to implement (1) and (2)---need more spec for this information.
  * ****************************************************************************/
 u32 rtl8192_phy_RFSerialRead(struct net_device* dev, RF90_RADIO_PATH_E eRFPath, u32 Offset)
@@ -201,7 +201,7 @@ u32 rtl8192_phy_RFSerialRead(struct net_device* dev, RF90_RADIO_PATH_E eRFPath,
 /******************************************************************************
  *function:  This function write data to RF register
  *   input:  net_device dev
- *   	     RF90_RADIO_PATH_E eRFPath //radio path of A/B/C/D
+ *	     RF90_RADIO_PATH_E eRFPath //radio path of A/B/C/D
  *           u32	Offset     //target address to be written
  *           u32	Data	//The new register data to be written
  *  output:  none
@@ -283,7 +283,7 @@ void rtl8192_phy_RFSerialWrite(struct net_device* dev, RF90_RADIO_PATH_E eRFPath
 /******************************************************************************
  *function:  This function set specific bits to RF register
  *   input:  net_device dev
- *   	     RF90_RADIO_PATH_E eRFPath //radio path of A/B/C/D
+ *	     RF90_RADIO_PATH_E eRFPath //radio path of A/B/C/D
  *           u32	RegAddr  //target addr to be modified
  *           u32	BitMask  //taget bit pos in the addr to be modified
  *           u32	Data     //value to be write
@@ -684,8 +684,8 @@ void rtl8192_InitBBRFRegDef(struct net_device* dev)
 /******************************************************************************
  *function:  This function is to write register and then readback to make sure whether BB and RF is OK
  *   input:  net_device dev
- *   	     HW90_BLOCK_E CheckBlock
- *   	     RF90_RADIO_PATH_E eRFPath  //only used when checkblock is HW90_BLOCK_RF
+ *	     HW90_BLOCK_E CheckBlock
+ *	     RF90_RADIO_PATH_E eRFPath  //only used when checkblock is HW90_BLOCK_RF
  *  output:  none
  *  return:  return whether BB and RF is ok(0:OK; 1:Fail)
  *  notice:  This function may be removed in the ASIC
@@ -1015,7 +1015,7 @@ u8 rtl8192_phy_ConfigRFWithHeaderFile(struct net_device* dev, RF90_RADIO_PATH_E
 /******************************************************************************
  *function:  This function set Tx Power of the channel
  *   input:  struct net_device *dev
- *   	     u8 		channel
+ *	     u8			channel
  *  output:  none
  *  return:  none
  *    Note:
@@ -1052,7 +1052,7 @@ void rtl8192_SetTxPowerLevel(struct net_device *dev, u8 channel)
 /******************************************************************************
  *function:  This function set RF state on or off
  *   input:  struct net_device *dev
- *   	     RT_RF_POWER_STATE eRFPowerState  //Power State to set
+ *	     RT_RF_POWER_STATE eRFPowerState  //Power State to set
  *  output:  none
  *  return:  none
  *    Note:
@@ -1183,10 +1183,10 @@ bool rtl8192_SetRFPowerState(struct net_device *dev, RT_RF_POWER_STATE eRFPowerS
 
 /****************************************************************************************
  *function:  This function set command table variable(struct SwChnlCmd).
- *   input:  SwChnlCmd*		CmdTable 	//table to be set.
- *   	     u32		CmdTableIdx 	//variable index in table to be set
- *   	     u32		CmdTableSz	//table size.
- *   	     SwChnlCmdID	CmdID		//command ID to set.
+ *   input:  SwChnlCmd*		CmdTable	//table to be set.
+ *	     u32		CmdTableIdx	//variable index in table to be set
+ *	     u32		CmdTableSz	//table size.
+ *	     SwChnlCmdID	CmdID		//command ID to set.
  *	     u32		Para1
  *	     u32		Para2
  *	     u32		msDelay
@@ -1229,10 +1229,10 @@ u8 rtl8192_phy_SetSwChnlCmdArray(
 /******************************************************************************
  *function:  This function set channel step by step
  *   input:  struct net_device *dev
- *   	     u8 		channel
- *   	     u8* 		stage //3 stages
- *   	     u8* 		step  //
- *   	     u32* 		delay //whether need to delay
+ *	     u8			channel
+ *	     u8*		stage //3 stages
+ *	     u8*		step  //
+ *	     u32*		delay //whether need to delay
  *  output:  store new stage, step and delay for next step(combine with function above)
  *  return:  true if finished, false otherwise
  *    Note:  Wait for simpler function to replace it //wb
@@ -1386,7 +1386,7 @@ u8 rtl8192_phy_SwChnlStepByStep(struct net_device *dev, u8 channel, u8* stage, u
 /******************************************************************************
  *function:  This function does actually set channel work
  *   input:  struct net_device *dev
- *   	     u8 		channel
+ *	     u8			channel
  *  output:  none
  *  return:  noin
  *    Note:  We should not call this function directly
@@ -1427,7 +1427,7 @@ void rtl8192_SwChnl_WorkItem(struct net_device *dev)
 /******************************************************************************
  *function:  This function scheduled actual work item to set channel
  *   input:  net_device dev
- *   	     u8		channel //channel to set
+ *	     u8		channel //channel to set
  *  output:  none
  *  return:  return code show if workitem is scheduled(1:pass, 0:fail)
  *    Note:  Delay may be required for RF configuration
@@ -1501,12 +1501,12 @@ if (0) //to test current channel from RF reg 0x7.
 /******************************************************************************
  *function:  Callback routine of the work item for set bandwidth mode.
  *   input:  struct net_device *dev
- *   	     HT_CHANNEL_WIDTH	Bandwidth  //20M or 40M
- *   	     HT_EXTCHNL_OFFSET Offset 	   //Upper, Lower, or Don't care
+ *	     HT_CHANNEL_WIDTH	Bandwidth  //20M or 40M
+ *	     HT_EXTCHNL_OFFSET Offset	   //Upper, Lower, or Don't care
  *  output:  none
  *  return:  none
  *    Note:  I doubt whether SetBWModeInProgress flag is necessary as we can
- *    	     test whether current work in the queue or not.//do I?
+ *	     test whether current work in the queue or not.//do I?
  * ***************************************************************************/
 void rtl8192_SetBWModeWorkItem(struct net_device *dev)
 {
@@ -1649,12 +1649,12 @@ void rtl8192_SetBWModeWorkItem(struct net_device *dev)
 /******************************************************************************
  *function:  This function schedules bandwidth switch work.
  *   input:  struct net_device *dev
- *   	     HT_CHANNEL_WIDTH	Bandwidth  //20M or 40M
- *   	     HT_EXTCHNL_OFFSET Offset 	   //Upper, Lower, or Don't care
+ *	     HT_CHANNEL_WIDTH	Bandwidth  //20M or 40M
+ *	     HT_EXTCHNL_OFFSET Offset	   //Upper, Lower, or Don't care
  *  output:  none
  *  return:  none
  *    Note:  I doubt whether SetBWModeInProgress flag is necessary as we can
- *    	     test whether current work in the queue or not.//do I?
+ *	     test whether current work in the queue or not.//do I?
  * ***************************************************************************/
 void rtl8192_SetBWMode(struct net_device *dev, HT_CHANNEL_WIDTH	Bandwidth, HT_EXTCHNL_OFFSET Offset)
 {
@@ -1770,4 +1770,3 @@ extern void InitialGainOperateWorkItemCallBack(struct work_struct *work)
 			break;
 	}
 }
-