OMAPDSS: tpo-td043: remove platform_enable/disable callbacks

The tpo-td043 panel driver now manages the gpios required to configure the panel.
This was previously done in omap_dss_device's platform_enable/disable callbacks
defined in board files using this panel.

All the board files using this panel now pass the gpio information as platform
data via the panel_tpo_td043_data struct, which is needed by the panel driver to
configure the gpios connected to the panel. Hence, the platform_enable/disable
ops can be safely removed now.

Signed-off-by: Archit Taneja <archit@ti.com>

drivers/video/omap2/displays/panel-tpo-td043mtea1.c

@@ -351,12 +351,6 @@ static int tpo_td043_enable_dss(struct omap_dss_device *dssdev)
 	if (r)
 		goto err0;
 
-	if (dssdev->platform_enable) {
-		r = dssdev->platform_enable(dssdev);
-		if (r)
-			goto err1;
-	}
-
 	/*
 	 * If we are resuming from system suspend, SPI clocks might not be
 	 * enabled yet, so we'll program the LCD from SPI PM resume callback.
@@ -383,9 +377,6 @@ static void tpo_td043_disable_dss(struct omap_dss_device *dssdev)
 	if (dssdev->state != OMAP_DSS_DISPLAY_ACTIVE)
 		return;
 
-	if (dssdev->platform_disable)
-		dssdev->platform_disable(dssdev);
-
 	omapdss_dpi_display_disable(dssdev);
 
 	if (!tpo_td043->spi_suspended)