staging: comedi: conditionally build in PCI driver support

Separate the comedi_pci_* functions out of drivers.c into a new
source file, comedi_pci.c. This allows conditionally building
support for comedi PCI drivers into the comedi core. Fix the
Kconfig and Makefile appropriately.

Group all the comedi_pci_* prototypes and related defines into one
place in comedidev.h. Protect these prototypes with an #ifdef and
provide some dummy functions so that the mixed ISA/PCI comedi
drivers will still build correctly.

Remove the #include <linux/pci.h> from comedidev.h and drivers.c. This
include is only needed by the comedi PCI driver support code and the
PCI drivers. The include should occur in those files.

Also, remove the #include <linux/pci.h> from a couple non-PCI drivers
since it's not needed.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/staging/comedi/Kconfig

@@ -542,11 +542,7 @@ menuconfig COMEDI_PCI_DRIVERS
 	bool "Comedi PCI drivers"
 	depends on PCI
 	---help---
-	  Enable comedi PCI drivers to be built
-
-	  Note that the answer to this question won't directly affect the
-	  kernel: saying N will just cause the configurator to skip all
-	  the questions about PCI comedi drivers.
+	  Enable support for comedi PCI drivers.
 
 if COMEDI_PCI_DRIVERS
 

drivers/staging/comedi/Makefile

@@ -1,5 +1,6 @@
 comedi-y				:= comedi_fops.o range.o drivers.o \
 					   comedi_buf.o
+comedi-$(CONFIG_COMEDI_PCI_DRIVERS)	+= comedi_pci.o
 comedi-$(CONFIG_COMEDI_USB_DRIVERS)	+= comedi_usb.o
 comedi-$(CONFIG_PROC_FS)		+= proc.o
 comedi-$(CONFIG_COMPAT)			+= comedi_compat32.o

drivers/staging/comedi/comedi_pci.c

@@ -0,0 +1,140 @@
+/*
+ * comedi_pci.c
+ * Comedi PCI driver specific functions.
+ *
+ * COMEDI - Linux Control and Measurement Device Interface
+ * Copyright (C) 1997-2000 David A. Schleef <ds@schleef.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/pci.h>
+
+#include "comedidev.h"
+
+/**
+ * comedi_to_pci_dev() - comedi_device pointer to pci_dev pointer.
+ * @dev: comedi_device struct
+ */
+struct pci_dev *comedi_to_pci_dev(struct comedi_device *dev)
+{
+	return dev->hw_dev ? to_pci_dev(dev->hw_dev) : NULL;
+}
+EXPORT_SYMBOL_GPL(comedi_to_pci_dev);
+
+/**
+ * comedi_pci_enable() - Enable the PCI device and request the regions.
+ * @pcidev: pci_dev struct
+ * @res_name: name for the requested reqource
+ */
+int comedi_pci_enable(struct pci_dev *pcidev, const char *res_name)
+{
+	int rc;
+
+	rc = pci_enable_device(pcidev);
+	if (rc < 0)
+		return rc;
+
+	rc = pci_request_regions(pcidev, res_name);
+	if (rc < 0)
+		pci_disable_device(pcidev);
+
+	return rc;
+}
+EXPORT_SYMBOL_GPL(comedi_pci_enable);
+
+/**
+ * comedi_pci_disable() - Release the regions and disable the PCI device.
+ * @pcidev: pci_dev struct
+ *
+ * This must be matched with a previous successful call to comedi_pci_enable().
+ */
+void comedi_pci_disable(struct pci_dev *pcidev)
+{
+	pci_release_regions(pcidev);
+	pci_disable_device(pcidev);
+}
+EXPORT_SYMBOL_GPL(comedi_pci_disable);
+
+/**
+ * comedi_pci_auto_config() - Configure/probe a comedi PCI driver.
+ * @pcidev: pci_dev struct
+ * @driver: comedi_driver struct
+ *
+ * Typically called from the pci_driver (*probe) function.
+ */
+int comedi_pci_auto_config(struct pci_dev *pcidev,
+			   struct comedi_driver *driver)
+{
+	return comedi_auto_config(&pcidev->dev, driver, 0);
+}
+EXPORT_SYMBOL_GPL(comedi_pci_auto_config);
+
+/**
+ * comedi_pci_auto_unconfig() - Unconfigure/remove a comedi PCI driver.
+ * @pcidev: pci_dev struct
+ *
+ * Typically called from the pci_driver (*remove) function.
+ */
+void comedi_pci_auto_unconfig(struct pci_dev *pcidev)
+{
+	comedi_auto_unconfig(&pcidev->dev);
+}
+EXPORT_SYMBOL_GPL(comedi_pci_auto_unconfig);
+
+/**
+ * comedi_pci_driver_register() - Register a comedi PCI driver.
+ * @comedi_driver: comedi_driver struct
+ * @pci_driver: pci_driver struct
+ *
+ * This function is used for the module_init() of comedi PCI drivers.
+ * Do not call it directly, use the module_comedi_pci_driver() helper
+ * macro instead.
+ */
+int comedi_pci_driver_register(struct comedi_driver *comedi_driver,
+			       struct pci_driver *pci_driver)
+{
+	int ret;
+
+	ret = comedi_driver_register(comedi_driver);
+	if (ret < 0)
+		return ret;
+
+	ret = pci_register_driver(pci_driver);
+	if (ret < 0) {
+		comedi_driver_unregister(comedi_driver);
+		return ret;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(comedi_pci_driver_register);
+
+/**
+ * comedi_pci_driver_unregister() - Unregister a comedi PCI driver.
+ * @comedi_driver: comedi_driver struct
+ * @pci_driver: pci_driver struct
+ *
+ * This function is used for the module_exit() of comedi PCI drivers.
+ * Do not call it directly, use the module_comedi_pci_driver() helper
+ * macro instead.
+ */
+void comedi_pci_driver_unregister(struct comedi_driver *comedi_driver,
+				  struct pci_driver *pci_driver)
+{
+	pci_unregister_driver(pci_driver);
+	comedi_driver_unregister(comedi_driver);
+}
+EXPORT_SYMBOL_GPL(comedi_pci_driver_unregister);

drivers/staging/comedi/comedidev.h

@@ -40,7 +40,6 @@
 #include <linux/uaccess.h>
 #include <linux/io.h>
 #include <linux/timer.h>
-#include <linux/pci.h>
 
 #include "comedi.h"
 
@@ -54,22 +53,6 @@
 	COMEDI_MINORVERSION, COMEDI_MICROVERSION)
 #define COMEDI_RELEASE VERSION
 
-/*
- * PCI Vendor IDs not in <linux/pci_ids.h>
- */
-#define PCI_VENDOR_ID_KOLTER		0x1001
-#define PCI_VENDOR_ID_ICP		0x104c
-#define PCI_VENDOR_ID_AMCC		0x10e8
-#define PCI_VENDOR_ID_DT		0x1116
-#define PCI_VENDOR_ID_IOTECH		0x1616
-#define PCI_VENDOR_ID_CONTEC		0x1221
-#define PCI_VENDOR_ID_CB		0x1307	/* Measurement Computing */
-#define PCI_VENDOR_ID_ADVANTECH		0x13fe
-#define PCI_VENDOR_ID_MEILHAUS		0x1402
-#define PCI_VENDOR_ID_RTD		0x1435
-#define PCI_VENDOR_ID_ADLINK		0x144a
-#define PCI_VENDOR_ID_AMPLICON		0x14dc
-
 #define COMEDI_NUM_MINORS 0x100
 #define COMEDI_NUM_BOARD_MINORS 0x30
 #define COMEDI_FIRST_SUBDEVICE_MINOR COMEDI_NUM_BOARD_MINORS
@@ -295,26 +278,6 @@ int comedi_driver_unregister(struct comedi_driver *);
 	module_driver(__comedi_driver, comedi_driver_register, \
 			comedi_driver_unregister)
 
-int comedi_pci_enable(struct pci_dev *, const char *);
-void comedi_pci_disable(struct pci_dev *);
-
-int comedi_pci_driver_register(struct comedi_driver *, struct pci_driver *);
-void comedi_pci_driver_unregister(struct comedi_driver *, struct pci_driver *);
-
-/**
- * module_comedi_pci_driver() - Helper macro for registering a comedi PCI driver
- * @__comedi_driver: comedi_driver struct
- * @__pci_driver: pci_driver struct
- *
- * Helper macro for comedi PCI drivers which do not do anything special
- * in module init/exit. This eliminates a lot of boilerplate. Each
- * module may only use this macro once, and calling it replaces
- * module_init() and module_exit()
- */
-#define module_comedi_pci_driver(__comedi_driver, __pci_driver) \
-	module_driver(__comedi_driver, comedi_pci_driver_register, \
-			comedi_pci_driver_unregister, &(__pci_driver))
-
 struct pcmcia_driver;
 
 int comedi_pcmcia_driver_register(struct comedi_driver *,
@@ -424,11 +387,6 @@ static inline void comedi_set_hw_dev(struct comedi_device *dev,
 	put_device(old_hw_dev);
 }
 
-static inline struct pci_dev *comedi_to_pci_dev(struct comedi_device *dev)
-{
-	return dev->hw_dev ? to_pci_dev(dev->hw_dev) : NULL;
-}
-
 unsigned int comedi_buf_write_alloc(struct comedi_async *, unsigned int);
 unsigned int comedi_buf_write_free(struct comedi_async *, unsigned int);
 
@@ -451,13 +409,77 @@ int comedi_auto_config(struct device *hardware_device,
 		       struct comedi_driver *driver, unsigned long context);
 void comedi_auto_unconfig(struct device *hardware_device);
 
-static inline int comedi_pci_auto_config(struct pci_dev *pcidev,
-					 struct comedi_driver *driver)
+#ifdef CONFIG_COMEDI_PCI_DRIVERS
+
+/* comedi_pci.c - comedi PCI driver specific functions */
+
+/*
+ * PCI Vendor IDs not in <linux/pci_ids.h>
+ */
+#define PCI_VENDOR_ID_KOLTER		0x1001
+#define PCI_VENDOR_ID_ICP		0x104c
+#define PCI_VENDOR_ID_AMCC		0x10e8
+#define PCI_VENDOR_ID_DT		0x1116
+#define PCI_VENDOR_ID_IOTECH		0x1616
+#define PCI_VENDOR_ID_CONTEC		0x1221
+#define PCI_VENDOR_ID_CB		0x1307	/* Measurement Computing */
+#define PCI_VENDOR_ID_ADVANTECH		0x13fe
+#define PCI_VENDOR_ID_MEILHAUS		0x1402
+#define PCI_VENDOR_ID_RTD		0x1435
+#define PCI_VENDOR_ID_ADLINK		0x144a
+#define PCI_VENDOR_ID_AMPLICON		0x14dc
+
+struct pci_dev;
+struct pci_driver;
+
+struct pci_dev *comedi_to_pci_dev(struct comedi_device *);
+
+int comedi_pci_enable(struct pci_dev *, const char *);
+void comedi_pci_disable(struct pci_dev *);
+
+int comedi_pci_auto_config(struct pci_dev *, struct comedi_driver *);
+void comedi_pci_auto_unconfig(struct pci_dev *);
+
+int comedi_pci_driver_register(struct comedi_driver *, struct pci_driver *);
+void comedi_pci_driver_unregister(struct comedi_driver *, struct pci_driver *);
+
+/**
+ * module_comedi_pci_driver() - Helper macro for registering a comedi PCI driver
+ * @__comedi_driver: comedi_driver struct
+ * @__pci_driver: pci_driver struct
+ *
+ * Helper macro for comedi PCI drivers which do not do anything special
+ * in module init/exit. This eliminates a lot of boilerplate. Each
+ * module may only use this macro once, and calling it replaces
+ * module_init() and module_exit()
+ */
+#define module_comedi_pci_driver(__comedi_driver, __pci_driver) \
+	module_driver(__comedi_driver, comedi_pci_driver_register, \
+			comedi_pci_driver_unregister, &(__pci_driver))
+
+#else
+
+/*
+ * Some of the comedi mixed ISA/PCI drivers call the PCI specific
+ * functions. Provide some dummy functions if CONFIG_COMEDI_PCI_DRIVERS
+ * is not enabled.
+ */
+
+static inline struct pci_dev *comedi_to_pci_dev(struct comedi_device *dev)
+{
+	return NULL;
+}
+
+static inline int comedi_pci_enable(struct pci_dev *dev, const char *name)
+{
+	return -ENOSYS;
+}
+
+static inline void comedi_pci_disable(struct pci_dev *dev)
 {
-	return comedi_auto_config(&pcidev->dev, driver, 0);
 }
 
-void comedi_pci_auto_unconfig(struct pci_dev *pcidev);
+#endif /* CONFIG_COMEDI_PCI_DRIVERS */
 
 #ifdef CONFIG_COMEDI_USB_DRIVERS
 

drivers/staging/comedi/drivers.c

@@ -23,7 +23,6 @@
 
 #include <linux/device.h>
 #include <linux/module.h>
-#include <linux/pci.h>
 #include <pcmcia/cistpl.h>
 #include <pcmcia/ds.h>
 #include <linux/errno.h>
@@ -496,73 +495,6 @@ void comedi_auto_unconfig(struct device *hardware_device)
 }
 EXPORT_SYMBOL_GPL(comedi_auto_unconfig);
 
-/**
- * comedi_pci_enable() - Enable the PCI device and request the regions.
- * @pdev: pci_dev struct
- * @res_name: name for the requested reqource
- */
-int comedi_pci_enable(struct pci_dev *pdev, const char *res_name)
-{
-	int rc;
-
-	rc = pci_enable_device(pdev);
-	if (rc < 0)
-		return rc;
-
-	rc = pci_request_regions(pdev, res_name);
-	if (rc < 0)
-		pci_disable_device(pdev);
-
-	return rc;
-}
-EXPORT_SYMBOL_GPL(comedi_pci_enable);
-
-/**
- * comedi_pci_disable() - Release the regions and disable the PCI device.
- * @pdev: pci_dev struct
- *
- * This must be matched with a previous successful call to comedi_pci_enable().
- */
-void comedi_pci_disable(struct pci_dev *pdev)
-{
-	pci_release_regions(pdev);
-	pci_disable_device(pdev);
-}
-EXPORT_SYMBOL_GPL(comedi_pci_disable);
-
-int comedi_pci_driver_register(struct comedi_driver *comedi_driver,
-		struct pci_driver *pci_driver)
-{
-	int ret;
-
-	ret = comedi_driver_register(comedi_driver);
-	if (ret < 0)
-		return ret;
-
-	ret = pci_register_driver(pci_driver);
-	if (ret < 0) {
-		comedi_driver_unregister(comedi_driver);
-		return ret;
-	}
-
-	return 0;
-}
-EXPORT_SYMBOL_GPL(comedi_pci_driver_register);
-
-void comedi_pci_driver_unregister(struct comedi_driver *comedi_driver,
-		struct pci_driver *pci_driver)
-{
-	pci_unregister_driver(pci_driver);
-	comedi_driver_unregister(comedi_driver);
-}
-EXPORT_SYMBOL_GPL(comedi_pci_driver_unregister);
-
-void comedi_pci_auto_unconfig(struct pci_dev *pcidev)
-{
-	comedi_auto_unconfig(&pcidev->dev);
-}
-EXPORT_SYMBOL_GPL(comedi_pci_auto_unconfig);
-
 #if IS_ENABLED(CONFIG_PCMCIA)
 int comedi_pcmcia_driver_register(struct comedi_driver *comedi_driver,
 		struct pcmcia_driver *pcmcia_driver)

drivers/staging/comedi/drivers/8255_pci.c

@@ -54,6 +54,8 @@ Interrupt support for these boards is also not currently supported.
 Configuration Options: not applicable, uses PCI auto config
 */
 
+#include <linux/pci.h>
+
 #include "../comedidev.h"
 
 #include "8255.h"

drivers/staging/comedi/drivers/addi_apci_035.c

@@ -1,3 +1,5 @@
+#include <linux/pci.h>
+
 #include "../comedidev.h"
 #include "comedi_fc.h"
 #include "amcc_s5933.h"

drivers/staging/comedi/drivers/addi_apci_1032.c

@@ -29,6 +29,7 @@
  * source code.
  */
 
+#include <linux/pci.h>
 #include <linux/interrupt.h>
 
 #include "../comedidev.h"

drivers/staging/comedi/drivers/addi_apci_1500.c

@@ -1,3 +1,5 @@
+#include <linux/pci.h>
+
 #include "../comedidev.h"
 #include "comedi_fc.h"
 #include "amcc_s5933.h"

drivers/staging/comedi/drivers/addi_apci_1516.c

@@ -29,6 +29,8 @@
  * this source code.
  */
 
+#include <linux/pci.h>
+
 #include "../comedidev.h"
 #include "addi_watchdog.h"
 #include "comedi_fc.h"

drivers/staging/comedi/drivers/addi_apci_1564.c

@@ -1,3 +1,5 @@
+#include <linux/pci.h>
+
 #include "../comedidev.h"
 #include "comedi_fc.h"
 #include "amcc_s5933.h"

drivers/staging/comedi/drivers/addi_apci_16xx.c

@@ -29,6 +29,8 @@
  * this source code.
  */
 
+#include <linux/pci.h>
+
 #include "../comedidev.h"
 
 /*

drivers/staging/comedi/drivers/addi_apci_1710.c

@@ -1,3 +1,5 @@
+#include <linux/pci.h>
+
 #include <asm/i387.h>
 
 #include "../comedidev.h"

drivers/staging/comedi/drivers/addi_apci_2032.c

@@ -29,6 +29,7 @@
  * this source code.
  */
 
+#include <linux/pci.h>
 #include <linux/interrupt.h>
 
 #include "../comedidev.h"

drivers/staging/comedi/drivers/addi_apci_2200.c

@@ -29,6 +29,8 @@
  * this source code.
  */
 
+#include <linux/pci.h>
+
 #include "../comedidev.h"
 #include "addi_watchdog.h"
 

drivers/staging/comedi/drivers/addi_apci_3120.c

@@ -1,3 +1,5 @@
+#include <linux/pci.h>
+
 #include "../comedidev.h"
 #include "comedi_fc.h"
 #include "amcc_s5933.h"

drivers/staging/comedi/drivers/addi_apci_3200.c

@@ -1,3 +1,5 @@
+#include <linux/pci.h>
+
 #include <asm/i387.h>
 
 #include "../comedidev.h"

drivers/staging/comedi/drivers/addi_apci_3501.c

@@ -29,6 +29,7 @@
  * this source code.
  */
 
+#include <linux/pci.h>
 #include <linux/interrupt.h>
 #include <linux/sched.h>
 

drivers/staging/comedi/drivers/addi_apci_3xxx.c

@@ -1,3 +1,5 @@
+#include <linux/pci.h>
+
 #include "../comedidev.h"
 #include "comedi_fc.h"
 #include "amcc_s5933.h"

drivers/staging/comedi/drivers/adl_pci6208.c

@@ -42,6 +42,8 @@ References:
 	- adl_pci9118.c
 */
 
+#include <linux/pci.h>
+
 #include "../comedidev.h"
 
 /*

drivers/staging/comedi/drivers/adl_pci7x3x.c

@@ -54,6 +54,8 @@ driver.
 Configuration Options: not applicable
 */
 
+#include <linux/pci.h>
+
 #include "../comedidev.h"
 
 /*

drivers/staging/comedi/drivers/adl_pci8164.c

@@ -30,9 +30,11 @@ Updated: Mon, 14 Apr 2008 15:10:32 +0100
 Configuration Options: not applicable, uses PCI auto config
 */
 
-#include "../comedidev.h"
 #include <linux/kernel.h>
+#include <linux/pci.h>
 #include <linux/delay.h>
+
+#include "../comedidev.h"
 #include "comedi_fc.h"
 #include "8253.h"
 

drivers/staging/comedi/drivers/adl_pci9111.c

@@ -68,11 +68,12 @@ TODO:
 
 */
 
-#include "../comedidev.h"
-
+#include <linux/pci.h>
 #include <linux/delay.h>
 #include <linux/interrupt.h>
 
+#include "../comedidev.h"
+
 #include "8253.h"
 #include "comedi_fc.h"
 

drivers/staging/comedi/drivers/adl_pci9118.c

@@ -76,13 +76,15 @@ Configuration options:
  * attachment if necessary, and possibly to set other options supported by
  * manual attachment.
  */
-#include "../comedidev.h"
 
+#include <linux/pci.h>
 #include <linux/delay.h>
 #include <linux/gfp.h>
 #include <linux/interrupt.h>
 #include <linux/io.h>
 
+#include "../comedidev.h"
+
 #include "amcc_s5933.h"
 #include "8253.h"
 #include "comedi_fc.h"

drivers/staging/comedi/drivers/adv_pci1710.c

@@ -41,6 +41,7 @@ Configuration options:
 	device will be used.
 */
 
+#include <linux/pci.h>
 #include <linux/interrupt.h>
 
 #include "../comedidev.h"

drivers/staging/comedi/drivers/adv_pci1723.c

@@ -48,6 +48,8 @@ TODO:
 3. Implement calibration.
 */
 
+#include <linux/pci.h>
+
 #include "../comedidev.h"
 
 /* all the registers for the pci1723 board */

drivers/staging/comedi/drivers/adv_pci_dio.c

@@ -29,10 +29,11 @@ Configuration options:
 
 */
 
-#include "../comedidev.h"
-
+#include <linux/pci.h>
 #include <linux/delay.h>
 
+#include "../comedidev.h"
+
 #include "8255.h"
 #include "8253.h"
 

drivers/staging/comedi/drivers/amplc_dio200.c

@@ -258,6 +258,7 @@
  * order they appear in the channel list.
  */
 
+#include <linux/pci.h>
 #include <linux/interrupt.h>
 #include <linux/slab.h>
 

drivers/staging/comedi/drivers/amplc_pc236.c

@@ -52,6 +52,7 @@ the IRQ jumper.  If no interrupt is connected, then subdevice 1 is
 unused.
 */
 
+#include <linux/pci.h>
 #include <linux/interrupt.h>
 
 #include "../comedidev.h"

drivers/staging/comedi/drivers/amplc_pc263.c

@@ -44,6 +44,8 @@ connected to a reed-relay. Relay contacts are closed when output is 1.
 The state of the outputs can be read.
 */
 
+#include <linux/pci.h>
+
 #include "../comedidev.h"
 
 #define PC263_DRIVER_NAME	"amplc_pc263"

drivers/staging/comedi/drivers/amplc_pci224.c

@@ -103,6 +103,7 @@ Caveats:
      correctly.
 */
 
+#include <linux/pci.h>
 #include <linux/interrupt.h>
 #include <linux/slab.h>
 

drivers/staging/comedi/drivers/amplc_pci230.c

@@ -188,11 +188,12 @@ Support for PCI230+/260+, more triggered scan functionality, and workarounds
 for (or detection of) various hardware problems added by Ian Abbott.
 */
 
-#include "../comedidev.h"
-
+#include <linux/pci.h>
 #include <linux/delay.h>
 #include <linux/interrupt.h>
 
+#include "../comedidev.h"
+
 #include "comedi_fc.h"
 #include "8253.h"
 #include "8255.h"

drivers/staging/comedi/drivers/cb_pcidas.c

@@ -67,10 +67,12 @@ TODO:
 analog triggering on 1602 series
 */
 
-#include "../comedidev.h"
+#include <linux/pci.h>
 #include <linux/delay.h>
 #include <linux/interrupt.h>
 
+#include "../comedidev.h"
+
 #include "8253.h"
 #include "8255.h"
 #include "amcc_s5933.h"

drivers/staging/comedi/drivers/cb_pcidas64.c

@@ -87,10 +87,12 @@ TODO:
 
 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
 
-#include "../comedidev.h"
+#include <linux/pci.h>
 #include <linux/delay.h>
 #include <linux/interrupt.h>
 
+#include "../comedidev.h"
+
 #include "8253.h"
 #include "8255.h"
 #include "plx9080.h"

drivers/staging/comedi/drivers/cb_pcidda.c

@@ -41,6 +41,8 @@
  * Only simple analog output writing is supported.
  */
 
+#include <linux/pci.h>
+
 #include "../comedidev.h"
 
 #include "comedi_fc.h"

drivers/staging/comedi/drivers/cb_pcimdas.c

@@ -40,11 +40,12 @@ No interrupts, multi channel or FIFO AI, although the card looks like it could s
 See http://www.mccdaq.com/PDFs/Manuals/pcim-das1602-16.pdf for more details.
 */
 
-#include "../comedidev.h"
-
+#include <linux/pci.h>
 #include <linux/delay.h>
 #include <linux/interrupt.h>
 
+#include "../comedidev.h"
+
 #include "plx9052.h"
 #include "8255.h"
 

drivers/staging/comedi/drivers/cb_pcimdda.c

@@ -79,6 +79,8 @@ Configuration Options: not applicable, uses PCI auto config
     -Calin Culianu <calin@ajvar.org>
  */
 
+#include <linux/pci.h>
+
 #include "../comedidev.h"
 
 #include "8255.h"

drivers/staging/comedi/drivers/contec_pci_dio.c

@@ -30,6 +30,8 @@ Status: works
 Configuration Options: not applicable, uses comedi PCI auto config
 */
 
+#include <linux/pci.h>
+
 #include "../comedidev.h"
 
 #define PCI_DEVICE_ID_PIO1616L 0x8172

drivers/staging/comedi/drivers/daqboard2000.c

@@ -107,12 +107,13 @@ Configuration options: not applicable, uses PCI auto config
 
  */
 
-#include "../comedidev.h"
-
+#include <linux/pci.h>
 #include <linux/delay.h>
 #include <linux/interrupt.h>
 #include <linux/firmware.h>
 
+#include "../comedidev.h"
+
 #include "8255.h"
 
 #define DAQBOARD2000_FIRMWARE		"daqboard2000_firmware.bin"

drivers/staging/comedi/drivers/das08.c

@@ -51,10 +51,11 @@
  * driver.
  */
 
-#include "../comedidev.h"
-
+#include <linux/pci.h>
 #include <linux/delay.h>
 
+#include "../comedidev.h"
+
 #include "8255.h"
 #include "8253.h"
 #include "das08.h"

drivers/staging/comedi/drivers/das08_cs.c

@@ -46,12 +46,11 @@ Options (for pcm-das08):
 Command support does not exist, but could be added for this board.
 */
 
-#include "../comedidev.h"
-
 #include <linux/delay.h>
-#include <linux/pci.h>
 #include <linux/slab.h>
 
+#include "../comedidev.h"
+
 #include "das08.h"
 
 /* pcmcia includes */

drivers/staging/comedi/drivers/das16.c

@@ -82,7 +82,9 @@ www.measurementcomputing.com
 #include <linux/pci.h>
 #include <linux/slab.h>
 #include <linux/interrupt.h>
+
 #include <asm/dma.h>
+
 #include "../comedidev.h"
 
 #include "8253.h"

drivers/staging/comedi/drivers/dt3000.c

@@ -55,9 +55,11 @@ AO commands are not supported.
 
 #define DEBUG 1
 
+#include <linux/pci.h>
+#include <linux/delay.h>
 #include <linux/interrupt.h>
+
 #include "../comedidev.h"
-#include <linux/delay.h>
 
 #include "comedi_fc.h"
 

drivers/staging/comedi/drivers/dyna_pci10xx.c

@@ -37,9 +37,11 @@
  their cards in their manuals.
 */
 
-#include "../comedidev.h"
+#include <linux/pci.h>
 #include <linux/mutex.h>
 
+#include "../comedidev.h"
+
 #define READ_TIMEOUT 50
 
 static const struct comedi_lrange range_pci1050_ai = { 3, {

drivers/staging/comedi/drivers/gsc_hpdi.c

@@ -47,9 +47,11 @@
 
 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
 
+#include <linux/pci.h>
+#include <linux/delay.h>
 #include <linux/interrupt.h>
+
 #include "../comedidev.h"
-#include <linux/delay.h>
 
 #include "plx9080.h"
 #include "comedi_fc.h"

drivers/staging/comedi/drivers/icp_multi.c

@@ -47,11 +47,11 @@ There are 4 x 12-bit Analogue Outputs.  Ranges : 5V, 10V, +/-5V, +/-10V
 Configuration options: not applicable, uses PCI auto config
 */
 
+#include <linux/pci.h>
+#include <linux/delay.h>
 #include <linux/interrupt.h>
-#include "../comedidev.h"
 
-#include <linux/delay.h>
-#include <linux/pci.h>
+#include "../comedidev.h"
 
 #define PCI_DEVICE_ID_ICP_MULTI	0x8000
 

drivers/staging/comedi/drivers/jr3_pci.c

@@ -42,15 +42,17 @@
  * comedi_nonfree_firmware tarball.  The file is called "jr3pci.idm".
  */
 
-#include "../comedidev.h"
-
+#include <linux/kernel.h>
+#include <linux/pci.h>
 #include <linux/delay.h>
 #include <linux/ctype.h>
 #include <linux/firmware.h>
 #include <linux/jiffies.h>
 #include <linux/slab.h>
 #include <linux/timer.h>
-#include <linux/kernel.h>
+
+#include "../comedidev.h"
+
 #include "jr3_pci.h"
 
 #define PCI_VENDOR_ID_JR3 0x1762

drivers/staging/comedi/drivers/ke_counter.c

@@ -34,6 +34,8 @@ This driver is a simple driver to read the counter values from
 Kolter Electronic PCI Counter Card.
 */
 
+#include <linux/pci.h>
+
 #include "../comedidev.h"
 
 #define CNT_CARD_DEVICE_ID      0x0014

drivers/staging/comedi/drivers/me4000.c

@@ -45,13 +45,14 @@ broken.
 
  */
 
-#include <linux/interrupt.h>
-#include "../comedidev.h"
-
+#include <linux/pci.h>
 #include <linux/delay.h>
+#include <linux/interrupt.h>
 #include <linux/list.h>
 #include <linux/spinlock.h>
 
+#include "../comedidev.h"
+
 #include "comedi_fc.h"
 #include "8253.h"
 

drivers/staging/comedi/drivers/me_daq.c

@@ -34,9 +34,11 @@
  *    Analog Input, Analog Output, Digital I/O
  */
 
+#include <linux/pci.h>
 #include <linux/interrupt.h>
 #include <linux/sched.h>
 #include <linux/firmware.h>
+
 #include "../comedidev.h"
 
 #define ME2600_FIRMWARE		"me2600_firmware.bin"

drivers/staging/comedi/drivers/mite.c

@@ -51,11 +51,12 @@
 
 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
 
-#include "mite.h"
+#include <linux/pci.h>
 
-#include "comedi_fc.h"
 #include "../comedidev.h"
 
+#include "comedi_fc.h"
+#include "mite.h"
 
 #define PCI_MITE_SIZE		4096
 #define PCI_DAQ_SIZE		4096

drivers/staging/comedi/drivers/ni_6527.c

@@ -41,7 +41,9 @@ Updated: Sat, 25 Jan 2003 13:24:40 -0800
 #define DEBUG 1
 #define DEBUG_FLAGS
 
+#include <linux/pci.h>
 #include <linux/interrupt.h>
+
 #include "../comedidev.h"
 
 #include "comedi_fc.h"

drivers/staging/comedi/drivers/ni_65xx.c

@@ -50,8 +50,11 @@ except maybe the 6514.
 
 #define DEBUG 1
 #define DEBUG_FLAGS
+
+#include <linux/pci.h>
 #include <linux/interrupt.h>
 #include <linux/slab.h>
+
 #include "../comedidev.h"
 
 #include "comedi_fc.h"

drivers/staging/comedi/drivers/ni_660x.c

@@ -40,8 +40,11 @@ DAQ 6601/6602 User Manual (NI 322137B-01)
 
 */
 
+#include <linux/pci.h>
 #include <linux/interrupt.h>
+
 #include "../comedidev.h"
+
 #include "mite.h"
 #include "ni_tio.h"
 

drivers/staging/comedi/drivers/ni_670x.c

@@ -41,8 +41,10 @@ Commands are not supported.
 
 */
 
+#include <linux/pci.h>
 #include <linux/interrupt.h>
 #include <linux/slab.h>
+
 #include "../comedidev.h"
 
 #include "mite.h"

drivers/staging/comedi/drivers/ni_labpc.c

@@ -73,12 +73,14 @@ NI manuals:
 
 */
 
+#include <linux/pci.h>
 #include <linux/interrupt.h>
 #include <linux/slab.h>
 #include <linux/io.h>
+#include <linux/delay.h>
+
 #include "../comedidev.h"
 
-#include <linux/delay.h>
 #include <asm/dma.h>
 
 #include "8253.h"

drivers/staging/comedi/drivers/ni_pcidio.c

@@ -55,9 +55,11 @@ comedi_nonfree_firmware tarball available from http://www.comedi.org
 /* #define DEBUG 1 */
 /* #define DEBUG_FLAGS */
 
+#include <linux/delay.h>
 #include <linux/interrupt.h>
 #include <linux/sched.h>
 #include <linux/firmware.h>
+
 #include "../comedidev.h"
 
 #include "comedi_fc.h"

drivers/staging/comedi/drivers/ni_pcimio.c

@@ -110,10 +110,12 @@ Bugs:
 
 */
 
+#include <linux/delay.h>
+#include <linux/delay.h>
+
 #include "../comedidev.h"
 
 #include <asm/byteorder.h>
-#include <linux/delay.h>
 
 #include "ni_stc.h"
 #include "mite.h"

drivers/staging/comedi/drivers/pcmda12.c

@@ -53,8 +53,6 @@ Configuration Options:
 
 #include "../comedidev.h"
 
-#include <linux/pci.h>		/* for PCI devices */
-
 #define CHANS 8
 #define IOSIZE 16
 #define LSB(x) ((unsigned char)((x) & 0xff))

drivers/staging/comedi/drivers/pcmmio.c

@@ -78,9 +78,9 @@ Configuration Options:
 
 #include <linux/interrupt.h>
 #include <linux/slab.h>
-#include <linux/pci.h>
 
 #include "../comedidev.h"
+
 #include "comedi_fc.h"
 
 /* This stuff is all from pcmuio.c -- it refers to the DIO subdevices only */

drivers/staging/comedi/drivers/pcmuio.c

@@ -77,9 +77,9 @@ Configuration Options:
 
 #include <linux/interrupt.h>
 #include <linux/slab.h>
-#include <linux/pci.h>
 
 #include "../comedidev.h"
+
 #include "comedi_fc.h"
 
 #define CHANS_PER_PORT   8

drivers/staging/comedi/drivers/rtd520.c

@@ -101,8 +101,9 @@ Configuration options:
 
 */
 
-#include <linux/interrupt.h>
+#include <linux/pci.h>
 #include <linux/delay.h>
+#include <linux/interrupt.h>
 
 #include "../comedidev.h"
 

drivers/staging/comedi/drivers/s626.c

@@ -64,6 +64,7 @@ INSN_CONFIG instructions:
    comedi_do_insn(cf,&insn); //executing configuration
 */
 
+#include <linux/pci.h>
 #include <linux/interrupt.h>
 #include <linux/kernel.h>
 #include <linux/types.h>

drivers/staging/comedi/drivers/skel.c

@@ -72,9 +72,9 @@ Configuration Options:
  * options that are used with comedi_config.
  */
 
-#include "../comedidev.h"
+#include <linux/pci.h>
 
-#include <linux/pci.h>		/* for PCI devices */
+#include "../comedidev.h"
 
 #include "comedi_fc.h"