|
|
@@ -0,0 +1,244 @@
|
|
|
+/*
|
|
|
+ * Copyright 2007 Robert Schwebel <r.schwebel@pengutronix.de>, Pengutronix
|
|
|
+ * Copyright (C) 2009 Sascha Hauer (kernel@pengutronix.de)
|
|
|
+ *
|
|
|
+ * This program is free software; you can redistribute it and/or
|
|
|
+ * modify it under the terms of the GNU General Public License
|
|
|
+ * as published by the Free Software Foundation; either version 2
|
|
|
+ * of the License, or (at your option) any later version.
|
|
|
+ * This program is distributed in the hope that it will be useful,
|
|
|
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
|
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
|
+ * GNU General Public License for more details.
|
|
|
+ *
|
|
|
+ * You should have received a copy of the GNU General Public License
|
|
|
+ * along with this program; if not, write to the Free Software
|
|
|
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
|
|
|
+ * MA 02110-1301, USA.
|
|
|
+ */
|
|
|
+
|
|
|
+#include <linux/platform_device.h>
|
|
|
+#include <linux/io.h>
|
|
|
+#include <linux/i2c.h>
|
|
|
+#include <linux/i2c/at24.h>
|
|
|
+#include <linux/dma-mapping.h>
|
|
|
+#include <linux/spi/spi.h>
|
|
|
+#include <linux/spi/eeprom.h>
|
|
|
+#include <linux/irq.h>
|
|
|
+#include <linux/gpio.h>
|
|
|
+
|
|
|
+#include <asm/mach/arch.h>
|
|
|
+#include <asm/mach-types.h>
|
|
|
+#include <mach/common.h>
|
|
|
+#include <mach/hardware.h>
|
|
|
+#include <mach/iomux.h>
|
|
|
+#include <mach/i2c.h>
|
|
|
+#include <asm/mach/time.h>
|
|
|
+#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
|
|
|
+#include <mach/spi.h>
|
|
|
+#endif
|
|
|
+#include <mach/imx-uart.h>
|
|
|
+#include <mach/mxc_nand.h>
|
|
|
+#include <mach/irqs.h>
|
|
|
+#include <mach/mmc.h>
|
|
|
+
|
|
|
+#include "devices.h"
|
|
|
+
|
|
|
+static int pca100_pins[] = {
|
|
|
+ /* UART1 */
|
|
|
+ PE12_PF_UART1_TXD,
|
|
|
+ PE13_PF_UART1_RXD,
|
|
|
+ PE14_PF_UART1_CTS,
|
|
|
+ PE15_PF_UART1_RTS,
|
|
|
+ /* SDHC */
|
|
|
+ PB4_PF_SD2_D0,
|
|
|
+ PB5_PF_SD2_D1,
|
|
|
+ PB6_PF_SD2_D2,
|
|
|
+ PB7_PF_SD2_D3,
|
|
|
+ PB8_PF_SD2_CMD,
|
|
|
+ PB9_PF_SD2_CLK,
|
|
|
+ /* FEC */
|
|
|
+ PD0_AIN_FEC_TXD0,
|
|
|
+ PD1_AIN_FEC_TXD1,
|
|
|
+ PD2_AIN_FEC_TXD2,
|
|
|
+ PD3_AIN_FEC_TXD3,
|
|
|
+ PD4_AOUT_FEC_RX_ER,
|
|
|
+ PD5_AOUT_FEC_RXD1,
|
|
|
+ PD6_AOUT_FEC_RXD2,
|
|
|
+ PD7_AOUT_FEC_RXD3,
|
|
|
+ PD8_AF_FEC_MDIO,
|
|
|
+ PD9_AIN_FEC_MDC,
|
|
|
+ PD10_AOUT_FEC_CRS,
|
|
|
+ PD11_AOUT_FEC_TX_CLK,
|
|
|
+ PD12_AOUT_FEC_RXD0,
|
|
|
+ PD13_AOUT_FEC_RX_DV,
|
|
|
+ PD14_AOUT_FEC_RX_CLK,
|
|
|
+ PD15_AOUT_FEC_COL,
|
|
|
+ PD16_AIN_FEC_TX_ER,
|
|
|
+ PF23_AIN_FEC_TX_EN,
|
|
|
+ /* SSI1 */
|
|
|
+ PC20_PF_SSI1_FS,
|
|
|
+ PC21_PF_SSI1_RXD,
|
|
|
+ PC22_PF_SSI1_TXD,
|
|
|
+ PC23_PF_SSI1_CLK,
|
|
|
+ /* onboard I2C */
|
|
|
+ PC5_PF_I2C2_SDA,
|
|
|
+ PC6_PF_I2C2_SCL,
|
|
|
+ /* external I2C */
|
|
|
+ PD17_PF_I2C_DATA,
|
|
|
+ PD18_PF_I2C_CLK,
|
|
|
+ /* SPI1 */
|
|
|
+ PD25_PF_CSPI1_RDY,
|
|
|
+ PD29_PF_CSPI1_SCLK,
|
|
|
+ PD30_PF_CSPI1_MISO,
|
|
|
+ PD31_PF_CSPI1_MOSI,
|
|
|
+};
|
|
|
+
|
|
|
+static struct imxuart_platform_data uart_pdata = {
|
|
|
+ .flags = IMXUART_HAVE_RTSCTS,
|
|
|
+};
|
|
|
+
|
|
|
+static struct mxc_nand_platform_data pca100_nand_board_info = {
|
|
|
+ .width = 1,
|
|
|
+ .hw_ecc = 1,
|
|
|
+};
|
|
|
+
|
|
|
+static struct platform_device *platform_devices[] __initdata = {
|
|
|
+ &mxc_w1_master_device,
|
|
|
+ &mxc_fec_device,
|
|
|
+};
|
|
|
+
|
|
|
+static struct imxi2c_platform_data pca100_i2c_1_data = {
|
|
|
+ .bitrate = 100000,
|
|
|
+};
|
|
|
+
|
|
|
+static struct at24_platform_data board_eeprom = {
|
|
|
+ .byte_len = 4096,
|
|
|
+ .page_size = 32,
|
|
|
+ .flags = AT24_FLAG_ADDR16,
|
|
|
+};
|
|
|
+
|
|
|
+static struct i2c_board_info pca100_i2c_devices[] = {
|
|
|
+ {
|
|
|
+ I2C_BOARD_INFO("at24", 0x52), /* E0=0, E1=1, E2=0 */
|
|
|
+ .platform_data = &board_eeprom,
|
|
|
+ }, {
|
|
|
+ I2C_BOARD_INFO("rtc-pcf8563", 0x51),
|
|
|
+ .type = "pcf8563"
|
|
|
+ }, {
|
|
|
+ I2C_BOARD_INFO("lm75", 0x4a),
|
|
|
+ .type = "lm75"
|
|
|
+ }
|
|
|
+};
|
|
|
+
|
|
|
+#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
|
|
|
+static struct spi_eeprom at25320 = {
|
|
|
+ .name = "at25320an",
|
|
|
+ .byte_len = 4096,
|
|
|
+ .page_size = 32,
|
|
|
+ .flags = EE_ADDR2,
|
|
|
+};
|
|
|
+
|
|
|
+static struct spi_board_info pca100_spi_board_info[] __initdata = {
|
|
|
+ {
|
|
|
+ .modalias = "at25",
|
|
|
+ .max_speed_hz = 30000,
|
|
|
+ .bus_num = 0,
|
|
|
+ .chip_select = 1,
|
|
|
+ .platform_data = &at25320,
|
|
|
+ },
|
|
|
+};
|
|
|
+
|
|
|
+static int pca100_spi_cs[] = {GPIO_PORTD + 28, GPIO_PORTD + 27};
|
|
|
+
|
|
|
+static struct spi_imx_master pca100_spi_0_data = {
|
|
|
+ .chipselect = pca100_spi_cs,
|
|
|
+ .num_chipselect = ARRAY_SIZE(pca100_spi_cs),
|
|
|
+};
|
|
|
+#endif
|
|
|
+
|
|
|
+static int pca100_sdhc2_init(struct device *dev, irq_handler_t detect_irq,
|
|
|
+ void *data)
|
|
|
+{
|
|
|
+ int ret;
|
|
|
+
|
|
|
+ ret = request_irq(IRQ_GPIOC(29), detect_irq,
|
|
|
+ IRQF_DISABLED | IRQF_TRIGGER_FALLING,
|
|
|
+ "imx-mmc-detect", data);
|
|
|
+ if (ret)
|
|
|
+ printk(KERN_ERR
|
|
|
+ "pca100: Failed to reuest irq for sd/mmc detection\n");
|
|
|
+
|
|
|
+ return ret;
|
|
|
+}
|
|
|
+
|
|
|
+static void pca100_sdhc2_exit(struct device *dev, void *data)
|
|
|
+{
|
|
|
+ free_irq(IRQ_GPIOC(29), data);
|
|
|
+}
|
|
|
+
|
|
|
+static struct imxmmc_platform_data sdhc_pdata = {
|
|
|
+ .init = pca100_sdhc2_init,
|
|
|
+ .exit = pca100_sdhc2_exit,
|
|
|
+};
|
|
|
+
|
|
|
+static void __init pca100_init(void)
|
|
|
+{
|
|
|
+ int ret;
|
|
|
+
|
|
|
+ ret = mxc_gpio_setup_multiple_pins(pca100_pins,
|
|
|
+ ARRAY_SIZE(pca100_pins), "PCA100");
|
|
|
+ if (ret)
|
|
|
+ printk(KERN_ERR "pca100: Failed to setup pins (%d)\n", ret);
|
|
|
+
|
|
|
+ mxc_register_device(&mxc_uart_device0, &uart_pdata);
|
|
|
+
|
|
|
+ mxc_gpio_mode(GPIO_PORTC | 29 | GPIO_GPIO | GPIO_IN);
|
|
|
+ mxc_register_device(&mxc_sdhc_device1, &sdhc_pdata);
|
|
|
+
|
|
|
+ mxc_register_device(&mxc_nand_device, &pca100_nand_board_info);
|
|
|
+
|
|
|
+ /* only the i2c master 1 is used on this CPU card */
|
|
|
+ i2c_register_board_info(1, pca100_i2c_devices,
|
|
|
+ ARRAY_SIZE(pca100_i2c_devices));
|
|
|
+
|
|
|
+ mxc_register_device(&mxc_i2c_device1, &pca100_i2c_1_data);
|
|
|
+
|
|
|
+ mxc_gpio_mode(GPIO_PORTD | 28 | GPIO_GPIO | GPIO_OUT);
|
|
|
+ mxc_gpio_mode(GPIO_PORTD | 27 | GPIO_GPIO | GPIO_OUT);
|
|
|
+
|
|
|
+ /* GPIO0_IRQ */
|
|
|
+ mxc_gpio_mode(GPIO_PORTC | 31 | GPIO_GPIO | GPIO_IN);
|
|
|
+ /* GPIO1_IRQ */
|
|
|
+ mxc_gpio_mode(GPIO_PORTC | 25 | GPIO_GPIO | GPIO_IN);
|
|
|
+ /* GPIO2_IRQ */
|
|
|
+ mxc_gpio_mode(GPIO_PORTE | 5 | GPIO_GPIO | GPIO_IN);
|
|
|
+
|
|
|
+#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
|
|
|
+ spi_register_board_info(pca100_spi_board_info,
|
|
|
+ ARRAY_SIZE(pca100_spi_board_info));
|
|
|
+ mxc_register_device(&mxc_spi_device0, &pca100_spi_0_data);
|
|
|
+#endif
|
|
|
+
|
|
|
+ platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
|
|
|
+}
|
|
|
+
|
|
|
+static void __init pca100_timer_init(void)
|
|
|
+{
|
|
|
+ mx27_clocks_init(26000000);
|
|
|
+}
|
|
|
+
|
|
|
+static struct sys_timer pca100_timer = {
|
|
|
+ .init = pca100_timer_init,
|
|
|
+};
|
|
|
+
|
|
|
+MACHINE_START(PCA100, "phyCARD-i.MX27")
|
|
|
+ .phys_io = AIPI_BASE_ADDR,
|
|
|
+ .io_pg_offst = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
|
|
|
+ .boot_params = PHYS_OFFSET + 0x100,
|
|
|
+ .map_io = mx27_map_io,
|
|
|
+ .init_irq = mxc_init_irq,
|
|
|
+ .init_machine = pca100_init,
|
|
|
+ .timer = &pca100_timer,
|
|
|
+MACHINE_END
|
|
|
+
|
Luotao Fu