powerpc/perf: Core EBB support for 64-bit book3s

Add support for EBB (Event Based Branches) on 64-bit book3s. See the
included documentation for more details.

EBBs are a feature which allows the hardware to branch directly to a
specified user space address when a PMU event overflows. This can be
used by programs for self-monitoring with no kernel involvement in the
inner loop.

Most of the logic is in the generic book3s code, primarily to avoid a
proliferation of PMU callbacks.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

Documentation/powerpc/00-INDEX

@@ -14,6 +14,8 @@ hvcs.txt
 	- IBM "Hypervisor Virtual Console Server" Installation Guide
 mpc52xx.txt
 	- Linux 2.6.x on MPC52xx family
+pmu-ebb.txt
+	- Description of the API for using the PMU with Event Based Branches.
 qe_firmware.txt
 	- describes the layout of firmware binaries for the Freescale QUICC
 	  Engine and the code that parses and uploads the microcode therein.

Documentation/powerpc/pmu-ebb.txt

@@ -0,0 +1,137 @@
+PMU Event Based Branches
+========================
+
+Event Based Branches (EBBs) are a feature which allows the hardware to
+branch directly to a specified user space address when certain events occur.
+
+The full specification is available in Power ISA v2.07:
+
+  https://www.power.org/documentation/power-isa-version-2-07/
+
+One type of event for which EBBs can be configured is PMU exceptions. This
+document describes the API for configuring the Power PMU to generate EBBs,
+using the Linux perf_events API.
+
+
+Terminology
+-----------
+
+Throughout this document we will refer to an "EBB event" or "EBB events". This
+just refers to a struct perf_event which has set the "EBB" flag in its
+attr.config. All events which can be configured on the hardware PMU are
+possible "EBB events".
+
+
+Background
+----------
+
+When a PMU EBB occurs it is delivered to the currently running process. As such
+EBBs can only sensibly be used by programs for self-monitoring.
+
+It is a feature of the perf_events API that events can be created on other
+processes, subject to standard permission checks. This is also true of EBB
+events, however unless the target process enables EBBs (via mtspr(BESCR)) no
+EBBs will ever be delivered.
+
+This makes it possible for a process to enable EBBs for itself, but not
+actually configure any events. At a later time another process can come along
+and attach an EBB event to the process, which will then cause EBBs to be
+delivered to the first process. It's not clear if this is actually useful.
+
+
+When the PMU is configured for EBBs, all PMU interrupts are delivered to the
+user process. This means once an EBB event is scheduled on the PMU, no non-EBB
+events can be configured. This means that EBB events can not be run
+concurrently with regular 'perf' commands, or any other perf events.
+
+It is however safe to run 'perf' commands on a process which is using EBBs. The
+kernel will in general schedule the EBB event, and perf will be notified that
+its events could not run.
+
+The exclusion between EBB events and regular events is implemented using the
+existing "pinned" and "exclusive" attributes of perf_events. This means EBB
+events will be given priority over other events, unless they are also pinned.
+If an EBB event and a regular event are both pinned, then whichever is enabled
+first will be scheduled and the other will be put in error state. See the
+section below titled "Enabling an EBB event" for more information.
+
+
+Creating an EBB event
+---------------------
+
+To request that an event is counted using EBB, the event code should have bit
+63 set.
+
+EBB events must be created with a particular, and restrictive, set of
+attributes - this is so that they interoperate correctly with the rest of the
+perf_events subsystem.
+
+An EBB event must be created with the "pinned" and "exclusive" attributes set.
+Note that if you are creating a group of EBB events, only the leader can have
+these attributes set.
+
+An EBB event must NOT set any of the "inherit", "sample_period", "freq" or
+"enable_on_exec" attributes.
+
+An EBB event must be attached to a task. This is specified to perf_event_open()
+by passing a pid value, typically 0 indicating the current task.
+
+All events in a group must agree on whether they want EBB. That is all events
+must request EBB, or none may request EBB.
+
+EBB events must specify the PMC they are to be counted on. This ensures
+userspace is able to reliably determine which PMC the event is scheduled on.
+
+
+Enabling an EBB event
+---------------------
+
+Once an EBB event has been successfully opened, it must be enabled with the
+perf_events API. This can be achieved either via the ioctl() interface, or the
+prctl() interface.
+
+However, due to the design of the perf_events API, enabling an event does not
+guarantee that it has been scheduled on the PMU. To ensure that the EBB event
+has been scheduled on the PMU, you must perform a read() on the event. If the
+read() returns EOF, then the event has not been scheduled and EBBs are not
+enabled.
+
+This behaviour occurs because the EBB event is pinned and exclusive. When the
+EBB event is enabled it will force all other non-pinned events off the PMU. In
+this case the enable will be successful. However if there is already an event
+pinned on the PMU then the enable will not be successful.
+
+
+Reading an EBB event
+--------------------
+
+It is possible to read() from an EBB event. However the results are
+meaningless. Because interrupts are being delivered to the user process the
+kernel is not able to count the event, and so will return a junk value.
+
+
+Closing an EBB event
+--------------------
+
+When an EBB event is finished with, you can close it using close() as for any
+regular event. If this is the last EBB event the PMU will be deconfigured and
+no further PMU EBBs will be delivered.
+
+
+EBB Handler
+-----------
+
+The EBB handler is just regular userspace code, however it must be written in
+the style of an interrupt handler. When the handler is entered all registers
+are live (possibly) and so must be saved somehow before the handler can invoke
+other code.
+
+It's up to the program how to handle this. For C programs a relatively simple
+option is to create an interrupt frame on the stack and save registers there.
+
+Fork
+----
+
+EBB events are not inherited across fork. If the child process wishes to use
+EBBs it should open a new event for itself. Similarly the EBB state in
+BESCR/EBBHR/EBBRR is cleared across fork().

arch/powerpc/include/asm/perf_event_server.h

@@ -60,6 +60,7 @@ struct power_pmu {
 #define PPMU_HAS_SSLOT		0x00000020 /* Has sampled slot in MMCRA */
 #define PPMU_HAS_SIER		0x00000040 /* Has SIER */
 #define PPMU_BHRB		0x00000080 /* has BHRB feature enabled */
+#define PPMU_EBB		0x00000100 /* supports event based branch */
 
 /*
  * Values for flags to get_alternatives()
@@ -68,6 +69,11 @@ struct power_pmu {
 #define PPMU_LIMITED_PMC_REQD	2	/* have to put this on a limited PMC */
 #define PPMU_ONLY_COUNT_RUN	4	/* only counting in run state */
 
+/*
+ * We use the event config bit 63 as a flag to request EBB.
+ */
+#define EVENT_CONFIG_EBB_SHIFT	63
+
 extern int register_power_pmu(struct power_pmu *);
 
 struct pt_regs;

arch/powerpc/include/asm/processor.h

@@ -287,8 +287,9 @@ struct thread_struct {
 	unsigned long	siar;
 	unsigned long	sdar;
 	unsigned long	sier;
-	unsigned long	mmcr0;
 	unsigned long	mmcr2;
+	unsigned 	mmcr0;
+	unsigned 	used_ebb;
 #endif
 };
 

arch/powerpc/include/asm/reg.h

@@ -621,6 +621,9 @@
 #define   MMCR0_PMXE	0x04000000UL /* performance monitor exception enable */
 #define   MMCR0_FCECE	0x02000000UL /* freeze ctrs on enabled cond or event */
 #define   MMCR0_TBEE	0x00400000UL /* time base exception enable */
+#define   MMCR0_EBE	0x00100000UL /* Event based branch enable */
+#define   MMCR0_PMCC	0x000c0000UL /* PMC control */
+#define   MMCR0_PMCC_U6	0x00080000UL /* PMC1-6 are R/W by user (PR) */
 #define   MMCR0_PMC1CE	0x00008000UL /* PMC1 count enable*/
 #define   MMCR0_PMCjCE	0x00004000UL /* PMCj count enable*/
 #define   MMCR0_TRIGGER	0x00002000UL /* TRIGGER enable */
@@ -674,6 +677,11 @@
 #define   SIER_SIAR_VALID	0x0400000	/* SIAR contents valid */
 #define   SIER_SDAR_VALID	0x0200000	/* SDAR contents valid */
 
+/* When EBB is enabled, some of MMCR0/MMCR2/SIER are user accessible */
+#define MMCR0_USER_MASK	(MMCR0_FC | MMCR0_PMXE | MMCR0_PMAO)
+#define MMCR2_USER_MASK	0x4020100804020000UL /* (FC1P|FC2P|FC3P|FC4P|FC5P|FC6P) */
+#define SIER_USER_MASK	0x7fffffUL
+
 #define SPRN_PA6T_MMCR0 795
 #define   PA6T_MMCR0_EN0	0x0000000000000001UL
 #define   PA6T_MMCR0_EN1	0x0000000000000002UL

arch/powerpc/include/asm/switch_to.h

@@ -67,4 +67,18 @@ static inline void flush_spe_to_thread(struct task_struct *t)
 }
 #endif
 
+static inline void clear_task_ebb(struct task_struct *t)
+{
+#ifdef CONFIG_PPC_BOOK3S_64
+    /* EBB perf events are not inherited, so clear all EBB state. */
+    t->thread.bescr = 0;
+    t->thread.mmcr2 = 0;
+    t->thread.mmcr0 = 0;
+    t->thread.siar = 0;
+    t->thread.sdar = 0;
+    t->thread.sier = 0;
+    t->thread.used_ebb = 0;
+#endif
+}
+
 #endif /* _ASM_POWERPC_SWITCH_TO_H */

arch/powerpc/kernel/process.c

@@ -916,7 +916,11 @@ int arch_dup_task_struct(struct task_struct *dst, struct task_struct *src)
 	flush_altivec_to_thread(src);
 	flush_vsx_to_thread(src);
 	flush_spe_to_thread(src);
+
 	*dst = *src;
+
+	clear_task_ebb(dst);
+
 	return 0;
 }
 

arch/powerpc/perf/core-book3s.c

@@ -77,6 +77,9 @@ static unsigned int freeze_events_kernel = MMCR0_FCS;
 #define MMCR0_PMCjCE		MMCR0_PMCnCE
 #define MMCR0_FC56		0
 #define MMCR0_PMAO		0
+#define MMCR0_EBE		0
+#define MMCR0_PMCC		0
+#define MMCR0_PMCC_U6		0
 
 #define SPRN_MMCRA		SPRN_MMCR2
 #define MMCRA_SAMPLE_ENABLE	0
@@ -104,6 +107,15 @@ static inline int siar_valid(struct pt_regs *regs)
 	return 1;
 }
 
+static bool is_ebb_event(struct perf_event *event) { return false; }
+static int ebb_event_check(struct perf_event *event) { return 0; }
+static void ebb_event_add(struct perf_event *event) { }
+static void ebb_switch_out(unsigned long mmcr0) { }
+static unsigned long ebb_switch_in(bool ebb, unsigned long mmcr0)
+{
+	return mmcr0;
+}
+
 static inline void power_pmu_bhrb_enable(struct perf_event *event) {}
 static inline void power_pmu_bhrb_disable(struct perf_event *event) {}
 void power_pmu_flush_branch_stack(void) {}
@@ -464,6 +476,89 @@ void power_pmu_bhrb_read(struct cpu_hw_events *cpuhw)
 	return;
 }
 
+static bool is_ebb_event(struct perf_event *event)
+{
+	/*
+	 * This could be a per-PMU callback, but we'd rather avoid the cost. We
+	 * check that the PMU supports EBB, meaning those that don't can still
+	 * use bit 63 of the event code for something else if they wish.
+	 */
+	return (ppmu->flags & PPMU_EBB) &&
+	       ((event->attr.config >> EVENT_CONFIG_EBB_SHIFT) & 1);
+}
+
+static int ebb_event_check(struct perf_event *event)
+{
+	struct perf_event *leader = event->group_leader;
+
+	/* Event and group leader must agree on EBB */
+	if (is_ebb_event(leader) != is_ebb_event(event))
+		return -EINVAL;
+
+	if (is_ebb_event(event)) {
+		if (!(event->attach_state & PERF_ATTACH_TASK))
+			return -EINVAL;
+
+		if (!leader->attr.pinned || !leader->attr.exclusive)
+			return -EINVAL;
+
+		if (event->attr.inherit || event->attr.sample_period ||
+		    event->attr.enable_on_exec || event->attr.freq)
+			return -EINVAL;
+	}
+
+	return 0;
+}
+
+static void ebb_event_add(struct perf_event *event)
+{
+	if (!is_ebb_event(event) || current->thread.used_ebb)
+		return;
+
+	/*
+	 * IFF this is the first time we've added an EBB event, set
+	 * PMXE in the user MMCR0 so we can detect when it's cleared by
+	 * userspace. We need this so that we can context switch while
+	 * userspace is in the EBB handler (where PMXE is 0).
+	 */
+	current->thread.used_ebb = 1;
+	current->thread.mmcr0 |= MMCR0_PMXE;
+}
+
+static void ebb_switch_out(unsigned long mmcr0)
+{
+	if (!(mmcr0 & MMCR0_EBE))
+		return;
+
+	current->thread.siar  = mfspr(SPRN_SIAR);
+	current->thread.sier  = mfspr(SPRN_SIER);
+	current->thread.sdar  = mfspr(SPRN_SDAR);
+	current->thread.mmcr0 = mmcr0 & MMCR0_USER_MASK;
+	current->thread.mmcr2 = mfspr(SPRN_MMCR2) & MMCR2_USER_MASK;
+}
+
+static unsigned long ebb_switch_in(bool ebb, unsigned long mmcr0)
+{
+	if (!ebb)
+		goto out;
+
+	/* Enable EBB and read/write to all 6 PMCs for userspace */
+	mmcr0 |= MMCR0_EBE | MMCR0_PMCC_U6;
+
+	/* Add any bits from the user reg, FC or PMAO */
+	mmcr0 |= current->thread.mmcr0;
+
+	/* Be careful not to set PMXE if userspace had it cleared */
+	if (!(current->thread.mmcr0 & MMCR0_PMXE))
+		mmcr0 &= ~MMCR0_PMXE;
+
+	mtspr(SPRN_SIAR, current->thread.siar);
+	mtspr(SPRN_SIER, current->thread.sier);
+	mtspr(SPRN_SDAR, current->thread.sdar);
+	mtspr(SPRN_MMCR2, current->thread.mmcr2);
+out:
+	return mmcr0;
+}
 #endif /* CONFIG_PPC64 */
 
 static void perf_event_interrupt(struct pt_regs *regs);
@@ -734,6 +829,13 @@ static void power_pmu_read(struct perf_event *event)
 
 	if (!event->hw.idx)
 		return;
+
+	if (is_ebb_event(event)) {
+		val = read_pmc(event->hw.idx);
+		local64_set(&event->hw.prev_count, val);
+		return;
+	}
+
 	/*
 	 * Performance monitor interrupts come even when interrupts
 	 * are soft-disabled, as long as interrupts are hard-enabled.
@@ -854,7 +956,7 @@ static void write_mmcr0(struct cpu_hw_events *cpuhw, unsigned long mmcr0)
 static void power_pmu_disable(struct pmu *pmu)
 {
 	struct cpu_hw_events *cpuhw;
-	unsigned long flags, val;
+	unsigned long flags, mmcr0, val;
 
 	if (!ppmu)
 		return;
@@ -871,11 +973,11 @@ static void power_pmu_disable(struct pmu *pmu)
 		}
 
 		/*
-		 * Set the 'freeze counters' bit, clear PMAO/FC56.
+		 * Set the 'freeze counters' bit, clear EBE/PMCC/PMAO/FC56.
 		 */
-		val  = mfspr(SPRN_MMCR0);
+		val  = mmcr0 = mfspr(SPRN_MMCR0);
 		val |= MMCR0_FC;
-		val &= ~(MMCR0_PMAO | MMCR0_FC56);
+		val &= ~(MMCR0_EBE | MMCR0_PMCC | MMCR0_PMAO | MMCR0_FC56);
 
 		/*
 		 * The barrier is to make sure the mtspr has been
@@ -896,7 +998,10 @@ static void power_pmu_disable(struct pmu *pmu)
 
 		cpuhw->disabled = 1;
 		cpuhw->n_added = 0;
+
+		ebb_switch_out(mmcr0);
 	}
+
 	local_irq_restore(flags);
 }
 
@@ -911,15 +1016,15 @@ static void power_pmu_enable(struct pmu *pmu)
 	struct cpu_hw_events *cpuhw;
 	unsigned long flags;
 	long i;
-	unsigned long val;
+	unsigned long val, mmcr0;
 	s64 left;
 	unsigned int hwc_index[MAX_HWEVENTS];
 	int n_lim;
 	int idx;
+	bool ebb;
 
 	if (!ppmu)
 		return;
-
 	local_irq_save(flags);
 
 	cpuhw = &__get_cpu_var(cpu_hw_events);
@@ -933,6 +1038,13 @@ static void power_pmu_enable(struct pmu *pmu)
 
 	cpuhw->disabled = 0;
 
+	/*
+	 * EBB requires an exclusive group and all events must have the EBB
+	 * flag set, or not set, so we can just check a single event. Also we
+	 * know we have at least one event.
+	 */
+	ebb = is_ebb_event(cpuhw->event[0]);
+
 	/*
 	 * If we didn't change anything, or only removed events,
 	 * no need to recalculate MMCR* settings and reset the PMCs.
@@ -1008,25 +1120,34 @@ static void power_pmu_enable(struct pmu *pmu)
 			++n_lim;
 			continue;
 		}
-		val = 0;
-		if (event->hw.sample_period) {
-			left = local64_read(&event->hw.period_left);
-			if (left < 0x80000000L)
-				val = 0x80000000L - left;
+
+		if (ebb)
+			val = local64_read(&event->hw.prev_count);
+		else {
+			val = 0;
+			if (event->hw.sample_period) {
+				left = local64_read(&event->hw.period_left);
+				if (left < 0x80000000L)
+					val = 0x80000000L - left;
+			}
+			local64_set(&event->hw.prev_count, val);
 		}
-		local64_set(&event->hw.prev_count, val);
+
 		event->hw.idx = idx;
 		if (event->hw.state & PERF_HES_STOPPED)
 			val = 0;
 		write_pmc(idx, val);
+
 		perf_event_update_userpage(event);
 	}
 	cpuhw->n_limited = n_lim;
 	cpuhw->mmcr[0] |= MMCR0_PMXE | MMCR0_FCECE;
 
  out_enable:
+	mmcr0 = ebb_switch_in(ebb, cpuhw->mmcr[0]);
+
 	mb();
-	write_mmcr0(cpuhw, cpuhw->mmcr[0]);
+	write_mmcr0(cpuhw, mmcr0);
 
 	/*
 	 * Enable instruction sampling if necessary
@@ -1124,6 +1245,8 @@ static int power_pmu_add(struct perf_event *event, int ef_flags)
 	event->hw.config = cpuhw->events[n0];
 
 nocheck:
+	ebb_event_add(event);
+
 	++cpuhw->n_events;
 	++cpuhw->n_added;
 
@@ -1484,6 +1607,11 @@ static int power_pmu_event_init(struct perf_event *event)
 		}
 	}
 
+	/* Extra checks for EBB */
+	err = ebb_event_check(event);
+	if (err)
+		return err;
+
 	/*
 	 * If this is in a group, check if it can go on with all the
 	 * other hardware events in the group.  We assume the event
@@ -1522,6 +1650,13 @@ static int power_pmu_event_init(struct perf_event *event)
 	event->hw.last_period = event->hw.sample_period;
 	local64_set(&event->hw.period_left, event->hw.last_period);
 
+	/*
+	 * For EBB events we just context switch the PMC value, we don't do any
+	 * of the sample_period logic. We use hw.prev_count for this.
+	 */
+	if (is_ebb_event(event))
+		local64_set(&event->hw.prev_count, 0);
+
 	/*
 	 * See if we need to reserve the PMU.
 	 * If no events are currently in use, then we have to take a