Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6

Documentation/kernel-parameters.txt

@@ -452,6 +452,11 @@ running once the system is up.
 
 	eata=		[HW,SCSI]
 
+	ec_intr=	[HW,ACPI] ACPI Embedded Controller interrupt mode
+			Format: <int>
+			0: polling mode
+			non-0: interrupt mode (default)
+
 	eda=		[HW,PS2]
 
 	edb=		[HW,PS2]

Documentation/sound/alsa/ALSA-Configuration.txt

@@ -837,8 +837,10 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
 
     Module for AC'97 motherboards from Intel and compatibles.
 			* Intel i810/810E, i815, i820, i830, i84x, MX440
+				ICH5, ICH6, ICH7, ESB2
 			* SiS 7012 (SiS 735)
-			* NVidia NForce, NForce2
+			* NVidia NForce, NForce2, NForce3, MCP04, CK804
+				 CK8, CK8S, MCP501
 			* AMD AMD768, AMD8111
 			* ALi m5455
 
@@ -868,6 +870,12 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
   --------------------
 
     Module for Intel ICH (i8x0) chipset MC97 modems.
+			* Intel i810/810E, i815, i820, i830, i84x, MX440
+				ICH5, ICH6, ICH7
+			* SiS 7013 (SiS 735)
+			* NVidia NForce, NForce2, NForce2s, NForce3
+			* AMD AMD8111
+			* ALi m5455
 
     ac97_clock	  - AC'97 codec clock base (0 = auto-detect)
 

Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl

@@ -5206,14 +5206,14 @@ struct _snd_pcm_runtime {
         You need to pass the <function>snd_dma_pci_data(pci)</function>,
         where pci is the struct <structname>pci_dev</structname> pointer
         of the chip as well.
-        The <type>snd_sg_buf_t</type> instance is created as
+        The <type>struct snd_sg_buf</type> instance is created as
         substream-&gt;dma_private. You can cast
         the pointer like: 
 
         <informalexample>
           <programlisting>
 <![CDATA[
-  struct snd_sg_buf *sgbuf = (struct snd_sg_buf_t*)substream->dma_private;
+  struct snd_sg_buf *sgbuf = (struct snd_sg_buf *)substream->dma_private;
 ]]>
           </programlisting>
         </informalexample>

arch/i386/kernel/acpi/Makefile

@@ -3,6 +3,6 @@ obj-$(CONFIG_X86_IO_APIC)	+= earlyquirk.o
 obj-$(CONFIG_ACPI_SLEEP)	+= sleep.o wakeup.o
 
 ifneq ($(CONFIG_ACPI_PROCESSOR),)
-obj-y				+= cstate.o
+obj-y				+= cstate.o processor.o
 endif
 

arch/i386/kernel/acpi/boot.c

@@ -464,7 +464,7 @@ int acpi_gsi_to_irq(u32 gsi, unsigned int *irq)
  * success: return IRQ number (>=0)
  * failure: return < 0
  */
-int acpi_register_gsi(u32 gsi, int edge_level, int active_high_low)
+int acpi_register_gsi(u32 gsi, int triggering, int polarity)
 {
 	unsigned int irq;
 	unsigned int plat_gsi = gsi;
@@ -476,14 +476,14 @@ int acpi_register_gsi(u32 gsi, int edge_level, int active_high_low)
 	if (acpi_irq_model == ACPI_IRQ_MODEL_PIC) {
 		extern void eisa_set_level_irq(unsigned int irq);
 
-		if (edge_level == ACPI_LEVEL_SENSITIVE)
+		if (triggering == ACPI_LEVEL_SENSITIVE)
 			eisa_set_level_irq(gsi);
 	}
 #endif
 
 #ifdef CONFIG_X86_IO_APIC
 	if (acpi_irq_model == ACPI_IRQ_MODEL_IOAPIC) {
-		plat_gsi = mp_register_gsi(gsi, edge_level, active_high_low);
+		plat_gsi = mp_register_gsi(gsi, triggering, polarity);
 	}
 #endif
 	acpi_gsi_to_irq(plat_gsi, &irq);

arch/i386/kernel/acpi/cstate.c

@@ -14,64 +14,6 @@
 #include <acpi/processor.h>
 #include <asm/acpi.h>
 
-static void acpi_processor_power_init_intel_pdc(struct acpi_processor_power
-						*pow)
-{
-	struct acpi_object_list *obj_list;
-	union acpi_object *obj;
-	u32 *buf;
-
-	/* allocate and initialize pdc. It will be used later. */
-	obj_list = kmalloc(sizeof(struct acpi_object_list), GFP_KERNEL);
-	if (!obj_list) {
-		printk(KERN_ERR "Memory allocation error\n");
-		return;
-	}
-
-	obj = kmalloc(sizeof(union acpi_object), GFP_KERNEL);
-	if (!obj) {
-		printk(KERN_ERR "Memory allocation error\n");
-		kfree(obj_list);
-		return;
-	}
-
-	buf = kmalloc(12, GFP_KERNEL);
-	if (!buf) {
-		printk(KERN_ERR "Memory allocation error\n");
-		kfree(obj);
-		kfree(obj_list);
-		return;
-	}
-
-	buf[0] = ACPI_PDC_REVISION_ID;
-	buf[1] = 1;
-	buf[2] = ACPI_PDC_C_CAPABILITY_SMP;
-
-	obj->type = ACPI_TYPE_BUFFER;
-	obj->buffer.length = 12;
-	obj->buffer.pointer = (u8 *) buf;
-	obj_list->count = 1;
-	obj_list->pointer = obj;
-	pow->pdc = obj_list;
-
-	return;
-}
-
-/* Initialize _PDC data based on the CPU vendor */
-void acpi_processor_power_init_pdc(struct acpi_processor_power *pow,
-				   unsigned int cpu)
-{
-	struct cpuinfo_x86 *c = cpu_data + cpu;
-
-	pow->pdc = NULL;
-	if (c->x86_vendor == X86_VENDOR_INTEL)
-		acpi_processor_power_init_intel_pdc(pow);
-
-	return;
-}
-
-EXPORT_SYMBOL(acpi_processor_power_init_pdc);
-
 /*
  * Initialize bm_flags based on the CPU cache properties
  * On SMP it depends on cache configuration

arch/i386/kernel/acpi/processor.c

@@ -0,0 +1,75 @@
+/*
+ * arch/i386/kernel/acpi/processor.c
+ *
+ * Copyright (C) 2005 Intel Corporation
+ * 	Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
+ * 	- Added _PDC for platforms with Intel CPUs
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/acpi.h>
+
+#include <acpi/processor.h>
+#include <asm/acpi.h>
+
+static void init_intel_pdc(struct acpi_processor *pr, struct cpuinfo_x86 *c)
+{
+	struct acpi_object_list *obj_list;
+	union acpi_object *obj;
+	u32 *buf;
+
+	/* allocate and initialize pdc. It will be used later. */
+	obj_list = kmalloc(sizeof(struct acpi_object_list), GFP_KERNEL);
+	if (!obj_list) {
+		printk(KERN_ERR "Memory allocation error\n");
+		return;
+	}
+
+	obj = kmalloc(sizeof(union acpi_object), GFP_KERNEL);
+	if (!obj) {
+		printk(KERN_ERR "Memory allocation error\n");
+		kfree(obj_list);
+		return;
+	}
+
+	buf = kmalloc(12, GFP_KERNEL);
+	if (!buf) {
+		printk(KERN_ERR "Memory allocation error\n");
+		kfree(obj);
+		kfree(obj_list);
+		return;
+	}
+
+	buf[0] = ACPI_PDC_REVISION_ID;
+	buf[1] = 1;
+	buf[2] = ACPI_PDC_C_CAPABILITY_SMP;
+
+	if (cpu_has(c, X86_FEATURE_EST))
+		buf[2] |= ACPI_PDC_EST_CAPABILITY_SMP;
+
+	obj->type = ACPI_TYPE_BUFFER;
+	obj->buffer.length = 12;
+	obj->buffer.pointer = (u8 *) buf;
+	obj_list->count = 1;
+	obj_list->pointer = obj;
+	pr->pdc = obj_list;
+
+	return;
+}
+
+/* Initialize _PDC data based on the CPU vendor */
+void arch_acpi_processor_init_pdc(struct acpi_processor *pr)
+{
+	unsigned int cpu = pr->id;
+	struct cpuinfo_x86 *c = cpu_data + cpu;
+
+	pr->pdc = NULL;
+	if (c->x86_vendor == X86_VENDOR_INTEL)
+		init_intel_pdc(pr, c);
+
+	return;
+}
+
+EXPORT_SYMBOL(arch_acpi_processor_init_pdc);

arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c

@@ -295,68 +295,6 @@ acpi_cpufreq_guess_freq (
 }
 
 
-/* 
- * acpi_processor_cpu_init_pdc_est - let BIOS know about the SMP capabilities
- * of this driver
- * @perf: processor-specific acpi_io_data struct
- * @cpu: CPU being initialized
- *
- * To avoid issues with legacy OSes, some BIOSes require to be informed of
- * the SMP capabilities of OS P-state driver. Here we set the bits in _PDC 
- * accordingly, for Enhanced Speedstep. Actual call to _PDC is done in
- * driver/acpi/processor.c
- */
-static void 
-acpi_processor_cpu_init_pdc_est(
-		struct acpi_processor_performance *perf, 
-		unsigned int cpu,
-		struct acpi_object_list *obj_list
-		)
-{
-	union acpi_object *obj;
-	u32 *buf;
-	struct cpuinfo_x86 *c = cpu_data + cpu;
-	dprintk("acpi_processor_cpu_init_pdc_est\n");
-
-	if (!cpu_has(c, X86_FEATURE_EST))
-		return;
-
-	/* Initialize pdc. It will be used later. */
-	if (!obj_list)
-		return;
-		
-	if (!(obj_list->count && obj_list->pointer))
-		return;
-
-	obj = obj_list->pointer;
-	if ((obj->buffer.length == 12) && obj->buffer.pointer) {
-		buf = (u32 *)obj->buffer.pointer;
-       		buf[0] = ACPI_PDC_REVISION_ID;
-       		buf[1] = 1;
-       		buf[2] = ACPI_PDC_EST_CAPABILITY_SMP;
-		perf->pdc = obj_list;
-	}
-	return;
-}
- 
-
-/* CPU specific PDC initialization */
-static void 
-acpi_processor_cpu_init_pdc(
-		struct acpi_processor_performance *perf, 
-		unsigned int cpu,
-		struct acpi_object_list *obj_list
-		)
-{
-	struct cpuinfo_x86 *c = cpu_data + cpu;
-	dprintk("acpi_processor_cpu_init_pdc\n");
-	perf->pdc = NULL;
-	if (cpu_has(c, X86_FEATURE_EST))
-		acpi_processor_cpu_init_pdc_est(perf, cpu, obj_list);
-	return;
-}
-
-
 static int
 acpi_cpufreq_cpu_init (
 	struct cpufreq_policy   *policy)
@@ -367,14 +305,7 @@ acpi_cpufreq_cpu_init (
 	unsigned int		result = 0;
 	struct cpuinfo_x86 *c = &cpu_data[policy->cpu];
 
-	union acpi_object		arg0 = {ACPI_TYPE_BUFFER};
-	u32				arg0_buf[3];
-	struct acpi_object_list 	arg_list = {1, &arg0};
-
 	dprintk("acpi_cpufreq_cpu_init\n");
-	/* setup arg_list for _PDC settings */
-        arg0.buffer.length = 12;
-        arg0.buffer.pointer = (u8 *) arg0_buf;
 
 	data = kzalloc(sizeof(struct cpufreq_acpi_io), GFP_KERNEL);
 	if (!data)
@@ -382,9 +313,7 @@ acpi_cpufreq_cpu_init (
 
 	acpi_io_data[cpu] = data;
 
-	acpi_processor_cpu_init_pdc(&data->acpi_data, cpu, &arg_list);
 	result = acpi_processor_register_performance(&data->acpi_data, cpu);
-	data->acpi_data.pdc = NULL;
 
 	if (result)
 		goto err_free;

arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c

@@ -362,22 +362,10 @@ static struct acpi_processor_performance p;
  */
 static int centrino_cpu_init_acpi(struct cpufreq_policy *policy)
 {
-	union acpi_object		arg0 = {ACPI_TYPE_BUFFER};
-	u32				arg0_buf[3];
-	struct acpi_object_list		arg_list = {1, &arg0};
 	unsigned long			cur_freq;
 	int				result = 0, i;
 	unsigned int			cpu = policy->cpu;
 
-	/* _PDC settings */
-	arg0.buffer.length = 12;
-	arg0.buffer.pointer = (u8 *) arg0_buf;
-	arg0_buf[0] = ACPI_PDC_REVISION_ID;
-	arg0_buf[1] = 1;
-	arg0_buf[2] = ACPI_PDC_EST_CAPABILITY_SMP_MSR;
-
-	p.pdc = &arg_list;
-
 	/* register with ACPI core */
 	if (acpi_processor_register_performance(&p, cpu)) {
 		dprintk(KERN_INFO PFX "obtaining ACPI data failed\n");

arch/i386/kernel/mpparse.c

@@ -1080,7 +1080,7 @@ void __init mp_config_acpi_legacy_irqs (void)
 
 #define MAX_GSI_NUM	4096
 
-int mp_register_gsi (u32 gsi, int edge_level, int active_high_low)
+int mp_register_gsi (u32 gsi, int triggering, int polarity)
 {
 	int			ioapic = -1;
 	int			ioapic_pin = 0;
@@ -1129,7 +1129,7 @@ int mp_register_gsi (u32 gsi, int edge_level, int active_high_low)
 
 	mp_ioapic_routing[ioapic].pin_programmed[idx] |= (1<<bit);
 
-	if (edge_level) {
+	if (triggering == ACPI_LEVEL_SENSITIVE) {
 		/*
 		 * For PCI devices assign IRQs in order, avoiding gaps
 		 * due to unused I/O APIC pins.
@@ -1151,8 +1151,8 @@ int mp_register_gsi (u32 gsi, int edge_level, int active_high_low)
 	}
 
 	io_apic_set_pci_routing(ioapic, ioapic_pin, gsi,
-		    edge_level == ACPI_EDGE_SENSITIVE ? 0 : 1,
-		    active_high_low == ACPI_ACTIVE_HIGH ? 0 : 1);
+		    triggering == ACPI_EDGE_SENSITIVE ? 0 : 1,
+		    polarity == ACPI_ACTIVE_HIGH ? 0 : 1);
 	return gsi;
 }
 

arch/ia64/kernel/Makefile

@@ -13,6 +13,11 @@ obj-$(CONFIG_IA64_BRL_EMU)	+= brl_emu.o
 obj-$(CONFIG_IA64_GENERIC)	+= acpi-ext.o
 obj-$(CONFIG_IA64_HP_ZX1)	+= acpi-ext.o
 obj-$(CONFIG_IA64_HP_ZX1_SWIOTLB) += acpi-ext.o
+
+ifneq ($(CONFIG_ACPI_PROCESSOR),)
+obj-y				+= acpi-processor.o
+endif
+
 obj-$(CONFIG_IA64_PALINFO)	+= palinfo.o
 obj-$(CONFIG_IOSAPIC)		+= iosapic.o
 obj-$(CONFIG_MODULES)		+= module.o

arch/ia64/kernel/acpi-ext.c

@@ -33,33 +33,33 @@ acpi_vendor_resource_match(struct acpi_resource *resource, void *context)
 	struct acpi_vendor_info *info = (struct acpi_vendor_info *)context;
 	struct acpi_resource_vendor *vendor;
 	struct acpi_vendor_descriptor *descriptor;
-	u32 length;
+	u32 byte_length;
 
-	if (resource->id != ACPI_RSTYPE_VENDOR)
+	if (resource->type != ACPI_RESOURCE_TYPE_VENDOR)
 		return AE_OK;
 
 	vendor = (struct acpi_resource_vendor *)&resource->data;
-	descriptor = (struct acpi_vendor_descriptor *)vendor->reserved;
-	if (vendor->length <= sizeof(*info->descriptor) ||
+	descriptor = (struct acpi_vendor_descriptor *)vendor->byte_data;
+	if (vendor->byte_length <= sizeof(*info->descriptor) ||
 	    descriptor->guid_id != info->descriptor->guid_id ||
 	    efi_guidcmp(descriptor->guid, info->descriptor->guid))
 		return AE_OK;
 
-	length = vendor->length - sizeof(struct acpi_vendor_descriptor);
-	info->data = acpi_os_allocate(length);
+	byte_length = vendor->byte_length - sizeof(struct acpi_vendor_descriptor);
+	info->data = acpi_os_allocate(byte_length);
 	if (!info->data)
 		return AE_NO_MEMORY;
 
 	memcpy(info->data,
-	       vendor->reserved + sizeof(struct acpi_vendor_descriptor),
-	       length);
-	info->length = length;
+	       vendor->byte_data + sizeof(struct acpi_vendor_descriptor),
+	       byte_length);
+	info->length = byte_length;
 	return AE_CTRL_TERMINATE;
 }
 
 acpi_status
 acpi_find_vendor_resource(acpi_handle obj, struct acpi_vendor_descriptor * id,
-			  u8 ** data, u32 * length)
+			  u8 ** data, u32 * byte_length)
 {
 	struct acpi_vendor_info info;
 
@@ -72,7 +72,7 @@ acpi_find_vendor_resource(acpi_handle obj, struct acpi_vendor_descriptor * id,
 		return AE_NOT_FOUND;
 
 	*data = info.data;
-	*length = info.length;
+	*byte_length = info.length;
 	return AE_OK;
 }
 

arch/ia64/kernel/acpi-processor.c

@@ -0,0 +1,67 @@
+/*
+ * arch/ia64/kernel/cpufreq/processor.c
+ *
+ * Copyright (C) 2005 Intel Corporation
+ * 	Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
+ * 	- Added _PDC for platforms with Intel CPUs
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/acpi.h>
+
+#include <acpi/processor.h>
+#include <asm/acpi.h>
+
+static void init_intel_pdc(struct acpi_processor *pr)
+{
+	struct acpi_object_list *obj_list;
+	union acpi_object *obj;
+	u32 *buf;
+
+	/* allocate and initialize pdc. It will be used later. */
+	obj_list = kmalloc(sizeof(struct acpi_object_list), GFP_KERNEL);
+	if (!obj_list) {
+		printk(KERN_ERR "Memory allocation error\n");
+		return;
+	}
+
+	obj = kmalloc(sizeof(union acpi_object), GFP_KERNEL);
+	if (!obj) {
+		printk(KERN_ERR "Memory allocation error\n");
+		kfree(obj_list);
+		return;
+	}
+
+	buf = kmalloc(12, GFP_KERNEL);
+	if (!buf) {
+		printk(KERN_ERR "Memory allocation error\n");
+		kfree(obj);
+		kfree(obj_list);
+		return;
+	}
+
+	buf[0] = ACPI_PDC_REVISION_ID;
+	buf[1] = 1;
+	buf[2] |= ACPI_PDC_EST_CAPABILITY_SMP;
+
+	obj->type = ACPI_TYPE_BUFFER;
+	obj->buffer.length = 12;
+	obj->buffer.pointer = (u8 *) buf;
+	obj_list->count = 1;
+	obj_list->pointer = obj;
+	pr->pdc = obj_list;
+
+	return;
+}
+
+/* Initialize _PDC data based on the CPU vendor */
+void arch_acpi_processor_init_pdc(struct acpi_processor *pr)
+{
+	pr->pdc = NULL;
+	init_intel_pdc(pr);
+	return;
+}
+
+EXPORT_SYMBOL(arch_acpi_processor_init_pdc);

arch/ia64/kernel/acpi.c

@@ -567,16 +567,16 @@ void __init acpi_numa_arch_fixup(void)
  * success: return IRQ number (>=0)
  * failure: return < 0
  */
-int acpi_register_gsi(u32 gsi, int edge_level, int active_high_low)
+int acpi_register_gsi(u32 gsi, int triggering, int polarity)
 {
 	if (has_8259 && gsi < 16)
 		return isa_irq_to_vector(gsi);
 
 	return iosapic_register_intr(gsi,
-				     (active_high_low ==
+				     (polarity ==
 				      ACPI_ACTIVE_HIGH) ? IOSAPIC_POL_HIGH :
 				     IOSAPIC_POL_LOW,
-				     (edge_level ==
+				     (triggering ==
 				      ACPI_EDGE_SENSITIVE) ? IOSAPIC_EDGE :
 				     IOSAPIC_LEVEL);
 }

arch/ia64/kernel/cpufreq/Makefile

@@ -1 +1,2 @@
 obj-$(CONFIG_IA64_ACPI_CPUFREQ)		+= acpi-cpufreq.o
+

arch/ia64/kernel/cpufreq/acpi-cpufreq.c

@@ -269,48 +269,6 @@ acpi_cpufreq_verify (
 }
 
 
-/*
- * processor_init_pdc - let BIOS know about the SMP capabilities
- * of this driver
- * @perf: processor-specific acpi_io_data struct
- * @cpu: CPU being initialized
- *
- * To avoid issues with legacy OSes, some BIOSes require to be informed of
- * the SMP capabilities of OS P-state driver. Here we set the bits in _PDC
- * accordingly. Actual call to _PDC is done in driver/acpi/processor.c
- */
-static void
-processor_init_pdc (
-		struct acpi_processor_performance *perf,
-		unsigned int cpu,
-		struct acpi_object_list *obj_list
-		)
-{
-	union acpi_object *obj;
-	u32 *buf;
-
-	dprintk("processor_init_pdc\n");
-
-	perf->pdc = NULL;
-	/* Initialize pdc. It will be used later. */
-	if (!obj_list)
-		return;
-
-	if (!(obj_list->count && obj_list->pointer))
-		return;
-
-	obj = obj_list->pointer;
-	if ((obj->buffer.length == 12) && obj->buffer.pointer) {
-		buf = (u32 *)obj->buffer.pointer;
-       		buf[0] = ACPI_PDC_REVISION_ID;
-       		buf[1] = 1;
-       		buf[2] = ACPI_PDC_EST_CAPABILITY_SMP;
-		perf->pdc = obj_list;
-	}
-	return;
-}
-
-
 static int
 acpi_cpufreq_cpu_init (
 	struct cpufreq_policy   *policy)
@@ -320,14 +278,7 @@ acpi_cpufreq_cpu_init (
 	struct cpufreq_acpi_io	*data;
 	unsigned int		result = 0;
 
-	union acpi_object		arg0 = {ACPI_TYPE_BUFFER};
-	u32				arg0_buf[3];
-	struct acpi_object_list 	arg_list = {1, &arg0};
-
 	dprintk("acpi_cpufreq_cpu_init\n");
-	/* setup arg_list for _PDC settings */
-        arg0.buffer.length = 12;
-        arg0.buffer.pointer = (u8 *) arg0_buf;
 
 	data = kmalloc(sizeof(struct cpufreq_acpi_io), GFP_KERNEL);
 	if (!data)
@@ -337,9 +288,7 @@ acpi_cpufreq_cpu_init (
 
 	acpi_io_data[cpu] = data;
 
-	processor_init_pdc(&data->acpi_data, cpu, &arg_list);
 	result = acpi_processor_register_performance(&data->acpi_data, cpu);
-	data->acpi_data.pdc = NULL;
 
 	if (result)
 		goto err_free;

arch/ia64/pci/pci.c

@@ -193,12 +193,12 @@ add_io_space (struct pci_root_info *info, struct acpi_resource_address64 *addr)
 		goto free_resource;
 	}
 
-	min = addr->min_address_range;
+	min = addr->minimum;
 	max = min + addr->address_length - 1;
-	if (addr->attribute.io.translation_attribute == ACPI_SPARSE_TRANSLATION)
+	if (addr->info.io.translation_type == ACPI_SPARSE_TRANSLATION)
 		sparse = 1;
 
-	space_nr = new_space(addr->address_translation_offset, sparse);
+	space_nr = new_space(addr->translation_offset, sparse);
 	if (space_nr == ~0)
 		goto free_name;
 
@@ -285,7 +285,7 @@ static __devinit acpi_status add_window(struct acpi_resource *res, void *data)
 	if (addr.resource_type == ACPI_MEMORY_RANGE) {
 		flags = IORESOURCE_MEM;
 		root = &iomem_resource;
-		offset = addr.address_translation_offset;
+		offset = addr.translation_offset;
 	} else if (addr.resource_type == ACPI_IO_RANGE) {
 		flags = IORESOURCE_IO;
 		root = &ioport_resource;
@@ -298,7 +298,7 @@ static __devinit acpi_status add_window(struct acpi_resource *res, void *data)
 	window = &info->controller->window[info->controller->windows++];
 	window->resource.name = info->name;
 	window->resource.flags = flags;
-	window->resource.start = addr.min_address_range + offset;
+	window->resource.start = addr.minimum + offset;
 	window->resource.end = window->resource.start + addr.address_length - 1;
 	window->resource.child = NULL;
 	window->offset = offset;

arch/powerpc/platforms/pseries/pci_dlpar.c

@@ -58,6 +58,7 @@ pcibios_find_pci_bus(struct device_node *dn)
 
 	return find_bus_among_children(pdn->phb->bus, dn);
 }
+EXPORT_SYMBOL_GPL(pcibios_find_pci_bus);
 
 /**
  * pcibios_remove_pci_devices - remove all devices under this bus
@@ -106,6 +107,7 @@ pcibios_fixup_new_pci_devices(struct pci_bus *bus, int fix_bus)
 		}
 	}
 }
+EXPORT_SYMBOL_GPL(pcibios_fixup_new_pci_devices);
 
 static int
 pcibios_pci_config_bridge(struct pci_dev *dev)
@@ -172,3 +174,4 @@ pcibios_add_pci_devices(struct pci_bus * bus)
 			pcibios_pci_config_bridge(dev);
 	}
 }
+EXPORT_SYMBOL_GPL(pcibios_add_pci_devices);

arch/x86_64/kernel/acpi/Makefile

@@ -1,3 +1,8 @@
 obj-y			:= boot.o
 boot-y			:= ../../../i386/kernel/acpi/boot.o
 obj-$(CONFIG_ACPI_SLEEP)	+= sleep.o wakeup.o
+
+ifneq ($(CONFIG_ACPI_PROCESSOR),)
+obj-y			+= processor.o
+endif
+

arch/x86_64/kernel/acpi/processor.c

@@ -0,0 +1,72 @@
+/*
+ * arch/x86_64/kernel/acpi/processor.c
+ *
+ * Copyright (C) 2005 Intel Corporation
+ * 	Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
+ * 	- Added _PDC for platforms with Intel CPUs
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/acpi.h>
+
+#include <acpi/processor.h>
+#include <asm/acpi.h>
+
+static void init_intel_pdc(struct acpi_processor *pr, struct cpuinfo_x86 *c)
+{
+	struct acpi_object_list *obj_list;
+	union acpi_object *obj;
+	u32 *buf;
+
+	/* allocate and initialize pdc. It will be used later. */
+	obj_list = kmalloc(sizeof(struct acpi_object_list), GFP_KERNEL);
+	if (!obj_list) {
+		printk(KERN_ERR "Memory allocation error\n");
+		return;
+	}
+
+	obj = kmalloc(sizeof(union acpi_object), GFP_KERNEL);
+	if (!obj) {
+		printk(KERN_ERR "Memory allocation error\n");
+		kfree(obj_list);
+		return;
+	}
+
+	buf = kmalloc(12, GFP_KERNEL);
+	if (!buf) {
+		printk(KERN_ERR "Memory allocation error\n");
+		kfree(obj);
+		kfree(obj_list);
+		return;
+	}
+
+	buf[0] = ACPI_PDC_REVISION_ID;
+	buf[1] = 1;
+	buf[2] = ACPI_PDC_EST_CAPABILITY_SMP;
+
+	obj->type = ACPI_TYPE_BUFFER;
+	obj->buffer.length = 12;
+	obj->buffer.pointer = (u8 *) buf;
+	obj_list->count = 1;
+	obj_list->pointer = obj;
+	pr->pdc = obj_list;
+
+	return;
+}
+
+/* Initialize _PDC data based on the CPU vendor */
+void arch_acpi_processor_init_pdc(struct acpi_processor *pr)
+{
+	unsigned int cpu = pr->id;
+	struct cpuinfo_x86 *c = cpu_data + cpu;
+
+	pr->pdc = NULL;
+	if (c->x86_vendor == X86_VENDOR_INTEL && cpu_has(c, X86_FEATURE_EST))
+		init_intel_pdc(pr, c);
+
+	return;
+}
+
+EXPORT_SYMBOL(arch_acpi_processor_init_pdc);

arch/x86_64/kernel/io_apic.c

@@ -2027,7 +2027,7 @@ int __init io_apic_get_redir_entries (int ioapic)
 }
 
 
-int io_apic_set_pci_routing (int ioapic, int pin, int irq, int edge_level, int active_high_low)
+int io_apic_set_pci_routing (int ioapic, int pin, int irq, int triggering, int polarity)
 {
 	struct IO_APIC_route_entry entry;
 	unsigned long flags;
@@ -2049,8 +2049,8 @@ int io_apic_set_pci_routing (int ioapic, int pin, int irq, int edge_level, int a
 	entry.delivery_mode = INT_DELIVERY_MODE;
 	entry.dest_mode = INT_DEST_MODE;
 	entry.dest.logical.logical_dest = cpu_mask_to_apicid(TARGET_CPUS);
-	entry.trigger = edge_level;
-	entry.polarity = active_high_low;
+	entry.trigger = triggering;
+	entry.polarity = polarity;
 	entry.mask = 1;					 /* Disabled (masked) */
 
 	irq = gsi_irq_sharing(irq);
@@ -2065,9 +2065,9 @@ int io_apic_set_pci_routing (int ioapic, int pin, int irq, int edge_level, int a
 	apic_printk(APIC_VERBOSE,KERN_DEBUG "IOAPIC[%d]: Set PCI routing entry (%d-%d -> 0x%x -> "
 		"IRQ %d Mode:%i Active:%i)\n", ioapic, 
 	       mp_ioapics[ioapic].mpc_apicid, pin, entry.vector, irq,
-	       edge_level, active_high_low);
+	       triggering, polarity);
 
-	ioapic_register_intr(irq, entry.vector, edge_level);
+	ioapic_register_intr(irq, entry.vector, triggering);
 
 	if (!ioapic && (irq < 16))
 		disable_8259A_irq(irq);

arch/x86_64/kernel/mpparse.c

@@ -915,7 +915,7 @@ void __init mp_config_acpi_legacy_irqs (void)
 
 #define MAX_GSI_NUM	4096
 
-int mp_register_gsi(u32 gsi, int edge_level, int active_high_low)
+int mp_register_gsi(u32 gsi, int triggering, int polarity)
 {
 	int			ioapic = -1;
 	int			ioapic_pin = 0;
@@ -964,7 +964,7 @@ int mp_register_gsi(u32 gsi, int edge_level, int active_high_low)
 
 	mp_ioapic_routing[ioapic].pin_programmed[idx] |= (1<<bit);
 
-	if (edge_level) {
+	if (triggering == ACPI_LEVEL_SENSITIVE) {
 		/*
 		 * For PCI devices assign IRQs in order, avoiding gaps
 		 * due to unused I/O APIC pins.
@@ -986,8 +986,8 @@ int mp_register_gsi(u32 gsi, int edge_level, int active_high_low)
 	}
 
 	io_apic_set_pci_routing(ioapic, ioapic_pin, gsi,
-		edge_level == ACPI_EDGE_SENSITIVE ? 0 : 1,
-		active_high_low == ACPI_ACTIVE_HIGH ? 0 : 1);
+		triggering == ACPI_EDGE_SENSITIVE ? 0 : 1,
+		polarity == ACPI_ACTIVE_HIGH ? 0 : 1);
 	return gsi;
 }
 

drivers/acpi/Kconfig

@@ -267,7 +267,6 @@ config ACPI_DEBUG
 
 config ACPI_EC
 	bool
-	depends on X86
 	default y
 	help
 	  This driver is required on some systems for the proper operation of

drivers/acpi/acpi_memhotplug.c

@@ -71,8 +71,8 @@ static struct acpi_driver acpi_memory_device_driver = {
 struct acpi_memory_device {
 	acpi_handle handle;
 	unsigned int state;	/* State of the memory device */
-	unsigned short cache_attribute;	/* memory cache attribute */
-	unsigned short read_write_attribute;	/* memory read/write attribute */
+	unsigned short caching;	/* memory cache attribute */
+	unsigned short write_protect;	/* memory read/write attribute */
 	u64 start_addr;		/* Memory Range start physical addr */
 	u64 end_addr;		/* Memory Range end physical addr */
 };
@@ -97,12 +97,12 @@ acpi_memory_get_device_resources(struct acpi_memory_device *mem_device)
 	if (ACPI_SUCCESS(status)) {
 		if (address64.resource_type == ACPI_MEMORY_RANGE) {
 			/* Populate the structure */
-			mem_device->cache_attribute =
-			    address64.attribute.memory.cache_attribute;
-			mem_device->read_write_attribute =
-			    address64.attribute.memory.read_write_attribute;
-			mem_device->start_addr = address64.min_address_range;
-			mem_device->end_addr = address64.max_address_range;
+			mem_device->caching =
+			    address64.info.mem.caching;
+			mem_device->write_protect =
+			    address64.info.mem.write_protect;
+			mem_device->start_addr = address64.minimum;
+			mem_device->end_addr = address64.maximum;
 		}
 	}
 
@@ -250,7 +250,6 @@ static int acpi_memory_disable_device(struct acpi_memory_device *mem_device)
 	int result;
 	u64 start = mem_device->start_addr;
 	u64 len = mem_device->end_addr - start + 1;
-	unsigned long attr = mem_device->read_write_attribute;
 
 	ACPI_FUNCTION_TRACE("acpi_memory_disable_device");
 

drivers/acpi/asus_acpi.c

@@ -78,9 +78,9 @@ MODULE_LICENSE("GPL");
 static uid_t asus_uid;
 static gid_t asus_gid;
 module_param(asus_uid, uint, 0);
-MODULE_PARM_DESC(uid, "UID for entries in /proc/acpi/asus.\n");
+MODULE_PARM_DESC(asus_uid, "UID for entries in /proc/acpi/asus.\n");
 module_param(asus_gid, uint, 0);
-MODULE_PARM_DESC(gid, "GID for entries in /proc/acpi/asus.\n");
+MODULE_PARM_DESC(asus_gid, "GID for entries in /proc/acpi/asus.\n");
 
 /* For each model, all features implemented, 
  * those marked with R are relative to HOTK, A for absolute */
@@ -302,7 +302,7 @@ static struct model_data model_conf[END_MODEL] = {
 	 .brightness_set = "SPLV",
 	 .brightness_get = "GPLV",
 	 .display_set = "SDSP",
-	 .display_get = "\\SSTE"},
+	 .display_get = "\\_SB.PCI0.P0P1.VGA.GETD"},
 	{
 	 .name = "M6R",
 	 .mt_mled = "MLED",
@@ -851,6 +851,8 @@ static int __init asus_hotk_add_fs(struct acpi_device *device)
 		mode = S_IFREG | S_IRUGO | S_IWUGO;
 	} else {
 		mode = S_IFREG | S_IRUSR | S_IRGRP | S_IWUSR | S_IWGRP;
+		printk(KERN_WARNING "  asus_uid and asus_gid parameters are "
+		       "deprecated, use chown and chmod instead!\n");
 	}
 
 	acpi_device_dir(device) = asus_proc_dir;
@@ -987,9 +989,21 @@ static int __init asus_hotk_get_info(void)
 		printk(KERN_NOTICE "  BSTS called, 0x%02x returned\n",
 		       bsts_result);
 
-	/* Samsung P30 has a device with a valid _HID whose INIT does not 
-	 * return anything. Catch this one and any similar here */
-	if (buffer.pointer == NULL) {
+	/* This is unlikely with implicit return */
+	if (buffer.pointer == NULL)
+		return -EINVAL;
+
+	model = (union acpi_object *) buffer.pointer;
+	/*
+	 * Samsung P30 has a device with a valid _HID whose INIT does not 
+	 * return anything. It used to be possible to catch this exception,
+	 * but the implicit return code will now happily confuse the 
+	 * driver. We assume that every ACPI_TYPE_STRING is a valid model
+	 * identifier but it's still possible to get completely bogus data.
+	 */
+	if (model->type == ACPI_TYPE_STRING) {
+		printk(KERN_NOTICE "  %s model detected, ", model->string.pointer);
+	} else {
 		if (asus_info &&	/* Samsung P30 */
 		    strncmp(asus_info->oem_table_id, "ODEM", 4) == 0) {
 			hotk->model = P30;
@@ -1002,13 +1016,10 @@ static int __init asus_hotk_get_info(void)
 			       "the developers with your DSDT\n");
 		}
 		hotk->methods = &model_conf[hotk->model];
-		return AE_OK;
-	}
+		
+		acpi_os_free(model);
 
-	model = (union acpi_object *)buffer.pointer;
-	if (model->type == ACPI_TYPE_STRING) {
-		printk(KERN_NOTICE "  %s model detected, ",
-		       model->string.pointer);
+		return AE_OK;
 	}
 
 	hotk->model = END_MODEL;

drivers/acpi/dispatcher/dsfield.c

@@ -5,7 +5,7 @@
  *****************************************************************************/
 
 /*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -128,7 +128,7 @@ acpi_ds_create_buffer_field(union acpi_parse_object *op,
 				   ACPI_IMODE_LOAD_PASS1, flags, walk_state,
 				   &(node));
 		if (ACPI_FAILURE(status)) {
-			ACPI_REPORT_NSERROR(arg->common.value.string, status);
+			ACPI_ERROR_NAMESPACE(arg->common.value.string, status);
 			return_ACPI_STATUS(status);
 		}
 	}
@@ -232,7 +232,8 @@ acpi_ds_get_field_names(struct acpi_create_field_info *info,
 			    + (acpi_integer) arg->common.value.size;
 
 			if (position > ACPI_UINT32_MAX) {
-				ACPI_REPORT_ERROR(("Bit offset within field too large (> 0xFFFFFFFF)\n"));
+				ACPI_ERROR((AE_INFO,
+					    "Bit offset within field too large (> 0xFFFFFFFF)"));
 				return_ACPI_STATUS(AE_SUPPORT);
 			}
 
@@ -268,8 +269,8 @@ acpi_ds_get_field_names(struct acpi_create_field_info *info,
 						ACPI_NS_DONT_OPEN_SCOPE,
 						walk_state, &info->field_node);
 			if (ACPI_FAILURE(status)) {
-				ACPI_REPORT_NSERROR((char *)&arg->named.name,
-						    status);
+				ACPI_ERROR_NAMESPACE((char *)&arg->named.name,
+						     status);
 				if (status != AE_ALREADY_EXISTS) {
 					return_ACPI_STATUS(status);
 				}
@@ -293,7 +294,11 @@ acpi_ds_get_field_names(struct acpi_create_field_info *info,
 			    + (acpi_integer) arg->common.value.size;
 
 			if (position > ACPI_UINT32_MAX) {
-				ACPI_REPORT_ERROR(("Field [%4.4s] bit offset too large (> 0xFFFFFFFF)\n", (char *)&info->field_node->name));
+				ACPI_ERROR((AE_INFO,
+					    "Field [%4.4s] bit offset too large (> 0xFFFFFFFF)",
+					    ACPI_CAST_PTR(char,
+							  &info->field_node->
+							  name)));
 				return_ACPI_STATUS(AE_SUPPORT);
 			}
 
@@ -302,9 +307,9 @@ acpi_ds_get_field_names(struct acpi_create_field_info *info,
 
 		default:
 
-			ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-					  "Invalid opcode in field list: %X\n",
-					  arg->common.aml_opcode));
+			ACPI_ERROR((AE_INFO,
+				    "Invalid opcode in field list: %X",
+				    arg->common.aml_opcode));
 			return_ACPI_STATUS(AE_AML_BAD_OPCODE);
 		}
 
@@ -349,7 +354,7 @@ acpi_ds_create_field(union acpi_parse_object *op,
 				   ACPI_IMODE_EXECUTE, ACPI_NS_SEARCH_PARENT,
 				   walk_state, &region_node);
 		if (ACPI_FAILURE(status)) {
-			ACPI_REPORT_NSERROR(arg->common.value.name, status);
+			ACPI_ERROR_NAMESPACE(arg->common.value.name, status);
 			return_ACPI_STATUS(status);
 		}
 	}
@@ -431,8 +436,8 @@ acpi_ds_init_field_objects(union acpi_parse_object *op,
 						ACPI_NS_ERROR_IF_FOUND,
 						walk_state, &node);
 			if (ACPI_FAILURE(status)) {
-				ACPI_REPORT_NSERROR((char *)&arg->named.name,
-						    status);
+				ACPI_ERROR_NAMESPACE((char *)&arg->named.name,
+						     status);
 				if (status != AE_ALREADY_EXISTS) {
 					return_ACPI_STATUS(status);
 				}
@@ -488,7 +493,7 @@ acpi_ds_create_bank_field(union acpi_parse_object *op,
 				   ACPI_IMODE_EXECUTE, ACPI_NS_SEARCH_PARENT,
 				   walk_state, &region_node);
 		if (ACPI_FAILURE(status)) {
-			ACPI_REPORT_NSERROR(arg->common.value.name, status);
+			ACPI_ERROR_NAMESPACE(arg->common.value.name, status);
 			return_ACPI_STATUS(status);
 		}
 	}
@@ -502,7 +507,7 @@ acpi_ds_create_bank_field(union acpi_parse_object *op,
 			   ACPI_NS_SEARCH_PARENT, walk_state,
 			   &info.register_node);
 	if (ACPI_FAILURE(status)) {
-		ACPI_REPORT_NSERROR(arg->common.value.string, status);
+		ACPI_ERROR_NAMESPACE(arg->common.value.string, status);
 		return_ACPI_STATUS(status);
 	}
 
@@ -560,7 +565,7 @@ acpi_ds_create_index_field(union acpi_parse_object *op,
 			   ACPI_NS_SEARCH_PARENT, walk_state,
 			   &info.register_node);
 	if (ACPI_FAILURE(status)) {
-		ACPI_REPORT_NSERROR(arg->common.value.string, status);
+		ACPI_ERROR_NAMESPACE(arg->common.value.string, status);
 		return_ACPI_STATUS(status);
 	}
 
@@ -573,7 +578,7 @@ acpi_ds_create_index_field(union acpi_parse_object *op,
 			   ACPI_NS_SEARCH_PARENT, walk_state,
 			   &info.data_register_node);
 	if (ACPI_FAILURE(status)) {
-		ACPI_REPORT_NSERROR(arg->common.value.string, status);
+		ACPI_ERROR_NAMESPACE(arg->common.value.string, status);
 		return_ACPI_STATUS(status);
 	}
 

drivers/acpi/dispatcher/dsinit.c

@@ -5,7 +5,7 @@
  *****************************************************************************/
 
 /*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -84,7 +84,7 @@ acpi_ds_init_one_object(acpi_handle obj_handle,
 	acpi_object_type type;
 	acpi_status status;
 
-	ACPI_FUNCTION_NAME("ds_init_one_object");
+	ACPI_FUNCTION_ENTRY();
 
 	/*
 	 * We are only interested in NS nodes owned by the table that
@@ -105,11 +105,10 @@ acpi_ds_init_one_object(acpi_handle obj_handle,
 
 		status = acpi_ds_initialize_region(obj_handle);
 		if (ACPI_FAILURE(status)) {
-			ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-					  "Region %p [%4.4s] - Init failure, %s\n",
-					  obj_handle,
-					  acpi_ut_get_node_name(obj_handle),
-					  acpi_format_exception(status)));
+			ACPI_EXCEPTION((AE_INFO, status,
+					"During Region initialization %p [%4.4s]",
+					obj_handle,
+					acpi_ut_get_node_name(obj_handle)));
 		}
 
 		info->op_region_count++;
@@ -117,14 +116,6 @@ acpi_ds_init_one_object(acpi_handle obj_handle,
 
 	case ACPI_TYPE_METHOD:
 
-		/*
-		 * Print a dot for each method unless we are going to print
-		 * the entire pathname
-		 */
-		if (!(acpi_dbg_level & ACPI_LV_INIT_NAMES)) {
-			ACPI_DEBUG_PRINT_RAW((ACPI_DB_INIT, "."));
-		}
-
 		/*
 		 * Set the execution data width (32 or 64) based upon the
 		 * revision number of the parent ACPI table.
@@ -134,6 +125,21 @@ acpi_ds_init_one_object(acpi_handle obj_handle,
 		if (info->table_desc->pointer->revision == 1) {
 			node->flags |= ANOBJ_DATA_WIDTH_32;
 		}
+#ifdef ACPI_INIT_PARSE_METHODS
+		/*
+		 * Note 11/2005: Removed this code to parse all methods during table
+		 * load because it causes problems if there are any errors during the
+		 * parse. Also, it seems like overkill and we probably don't want to
+		 * abort a table load because of an issue with a single method.
+		 */
+
+		/*
+		 * Print a dot for each method unless we are going to print
+		 * the entire pathname
+		 */
+		if (!(acpi_dbg_level & ACPI_LV_INIT_NAMES)) {
+			ACPI_DEBUG_PRINT_RAW((ACPI_DB_INIT, "."));
+		}
 
 		/*
 		 * Always parse methods to detect errors, we will delete
@@ -141,15 +147,15 @@ acpi_ds_init_one_object(acpi_handle obj_handle,
 		 */
 		status = acpi_ds_parse_method(obj_handle);
 		if (ACPI_FAILURE(status)) {
-			ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-					  "\n+Method %p [%4.4s] - parse failure, %s\n",
-					  obj_handle,
-					  acpi_ut_get_node_name(obj_handle),
-					  acpi_format_exception(status)));
+			ACPI_ERROR((AE_INFO,
+				    "Method %p [%4.4s] - parse failure, %s",
+				    obj_handle,
+				    acpi_ut_get_node_name(obj_handle),
+				    acpi_format_exception(status)));
 
 			/* This parse failed, but we will continue parsing more methods */
 		}
-
+#endif
 		info->method_count++;
 		break;
 
@@ -207,8 +213,7 @@ acpi_ds_initialize_objects(struct acpi_table_desc * table_desc,
 	status = acpi_walk_namespace(ACPI_TYPE_ANY, start_node, ACPI_UINT32_MAX,
 				     acpi_ds_init_one_object, &info, NULL);
 	if (ACPI_FAILURE(status)) {
-		ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "walk_namespace failed, %s\n",
-				  acpi_format_exception(status)));
+		ACPI_EXCEPTION((AE_INFO, status, "During walk_namespace"));
 	}
 
 	ACPI_DEBUG_PRINT_RAW((ACPI_DB_INIT,

drivers/acpi/dispatcher/dsmethod.c

@@ -5,7 +5,7 @@
  *****************************************************************************/
 
 /*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -47,135 +47,66 @@
 #include <acpi/acdispat.h>
 #include <acpi/acinterp.h>
 #include <acpi/acnamesp.h>
+#include <acpi/acdisasm.h>
 
 #define _COMPONENT          ACPI_DISPATCHER
 ACPI_MODULE_NAME("dsmethod")
 
 /*******************************************************************************
  *
- * FUNCTION:    acpi_ds_parse_method
+ * FUNCTION:    acpi_ds_method_error
  *
- * PARAMETERS:  Node        - Method node
+ * PARAMETERS:  Status          - Execution status
+ *              walk_state      - Current state
  *
  * RETURN:      Status
  *
- * DESCRIPTION: Parse the AML that is associated with the method.
+ * DESCRIPTION: Called on method error. Invoke the global exception handler if
+ *              present, dump the method data if the disassembler is configured
  *
- * MUTEX:       Assumes parser is locked
+ *              Note: Allows the exception handler to change the status code
  *
  ******************************************************************************/
-acpi_status acpi_ds_parse_method(struct acpi_namespace_node *node)
+acpi_status
+acpi_ds_method_error(acpi_status status, struct acpi_walk_state *walk_state)
 {
-	acpi_status status;
-	union acpi_operand_object *obj_desc;
-	union acpi_parse_object *op;
-	struct acpi_walk_state *walk_state;
-
-	ACPI_FUNCTION_TRACE_PTR("ds_parse_method", node);
+	ACPI_FUNCTION_ENTRY();
 
-	/* Parameter Validation */
+	/* Ignore AE_OK and control exception codes */
 
-	if (!node) {
-		return_ACPI_STATUS(AE_NULL_ENTRY);
+	if (ACPI_SUCCESS(status) || (status & AE_CODE_CONTROL)) {
+		return (status);
 	}
 
-	ACPI_DEBUG_PRINT((ACPI_DB_PARSE,
-			  "**** Parsing [%4.4s] **** named_obj=%p\n",
-			  acpi_ut_get_node_name(node), node));
-
-	/* Extract the method object from the method Node */
+	/* Invoke the global exception handler */
 
-	obj_desc = acpi_ns_get_attached_object(node);
-	if (!obj_desc) {
-		return_ACPI_STATUS(AE_NULL_OBJECT);
-	}
+	if (acpi_gbl_exception_handler) {
+		/* Exit the interpreter, allow handler to execute methods */
 
-	/* Create a mutex for the method if there is a concurrency limit */
+		acpi_ex_exit_interpreter();
 
-	if ((obj_desc->method.concurrency != ACPI_INFINITE_CONCURRENCY) &&
-	    (!obj_desc->method.semaphore)) {
-		status = acpi_os_create_semaphore(obj_desc->method.concurrency,
-						  obj_desc->method.concurrency,
-						  &obj_desc->method.semaphore);
-		if (ACPI_FAILURE(status)) {
-			return_ACPI_STATUS(status);
-		}
-	}
-
-	/*
-	 * Allocate a new parser op to be the root of the parsed
-	 * method tree
-	 */
-	op = acpi_ps_alloc_op(AML_METHOD_OP);
-	if (!op) {
-		return_ACPI_STATUS(AE_NO_MEMORY);
-	}
-
-	/* Init new op with the method name and pointer back to the Node */
-
-	acpi_ps_set_name(op, node->name.integer);
-	op->common.node = node;
-
-	/*
-	 * Get a new owner_id for objects created by this method. Namespace
-	 * objects (such as Operation Regions) can be created during the
-	 * first pass parse.
-	 */
-	status = acpi_ut_allocate_owner_id(&obj_desc->method.owner_id);
-	if (ACPI_FAILURE(status)) {
-		goto cleanup;
-	}
-
-	/* Create and initialize a new walk state */
-
-	walk_state =
-	    acpi_ds_create_walk_state(obj_desc->method.owner_id, NULL, NULL,
-				      NULL);
-	if (!walk_state) {
-		status = AE_NO_MEMORY;
-		goto cleanup2;
+		/*
+		 * Handler can map the exception code to anything it wants, including
+		 * AE_OK, in which case the executing method will not be aborted.
+		 */
+		status = acpi_gbl_exception_handler(status,
+						    walk_state->method_node ?
+						    walk_state->method_node->
+						    name.integer : 0,
+						    walk_state->opcode,
+						    walk_state->aml_offset,
+						    NULL);
+		(void)acpi_ex_enter_interpreter();
 	}
-
-	status = acpi_ds_init_aml_walk(walk_state, op, node,
-				       obj_desc->method.aml_start,
-				       obj_desc->method.aml_length, NULL, 1);
+#ifdef ACPI_DISASSEMBLER
 	if (ACPI_FAILURE(status)) {
-		acpi_ds_delete_walk_state(walk_state);
-		goto cleanup2;
-	}
+		/* Display method locals/args if disassembler is present */
 
-	/*
-	 * Parse the method, first pass
-	 *
-	 * The first pass load is where newly declared named objects are added into
-	 * the namespace.  Actual evaluation of the named objects (what would be
-	 * called a "second pass") happens during the actual execution of the
-	 * method so that operands to the named objects can take on dynamic
-	 * run-time values.
-	 */
-	status = acpi_ps_parse_aml(walk_state);
-	if (ACPI_FAILURE(status)) {
-		goto cleanup2;
+		acpi_dm_dump_method_info(status, walk_state, walk_state->op);
 	}
+#endif
 
-	ACPI_DEBUG_PRINT((ACPI_DB_PARSE,
-			  "**** [%4.4s] Parsed **** named_obj=%p Op=%p\n",
-			  acpi_ut_get_node_name(node), node, op));
-
-	/*
-	 * Delete the parse tree. We simply re-parse the method for every
-	 * execution since there isn't much overhead (compared to keeping lots
-	 * of parse trees around)
-	 */
-	acpi_ns_delete_namespace_subtree(node);
-	acpi_ns_delete_namespace_by_owner(obj_desc->method.owner_id);
-
-      cleanup2:
-	acpi_ut_release_owner_id(&obj_desc->method.owner_id);
-
-      cleanup:
-	acpi_ps_delete_parse_tree(op);
-	return_ACPI_STATUS(status);
+	return (status);
 }
 
 /*******************************************************************************
@@ -195,9 +126,9 @@ acpi_status acpi_ds_parse_method(struct acpi_namespace_node *node)
  ******************************************************************************/
 
 acpi_status
-acpi_ds_begin_method_execution(struct acpi_namespace_node *method_node,
-			       union acpi_operand_object *obj_desc,
-			       struct acpi_namespace_node *calling_method_node)
+acpi_ds_begin_method_execution(struct acpi_namespace_node * method_node,
+			       union acpi_operand_object * obj_desc,
+			       struct acpi_namespace_node * calling_method_node)
 {
 	acpi_status status = AE_OK;
 
@@ -210,7 +141,8 @@ acpi_ds_begin_method_execution(struct acpi_namespace_node *method_node,
 	/* Prevent wraparound of thread count */
 
 	if (obj_desc->method.thread_count == ACPI_UINT8_MAX) {
-		ACPI_REPORT_ERROR(("Method reached maximum reentrancy limit (255)\n"));
+		ACPI_ERROR((AE_INFO,
+			    "Method reached maximum reentrancy limit (255)"));
 		return_ACPI_STATUS(AE_AML_METHOD_LIMIT);
 	}
 
@@ -539,22 +471,61 @@ void acpi_ds_terminate_control_method(struct acpi_walk_state *walk_state)
 		    acpi_os_signal_semaphore(walk_state->method_desc->method.
 					     semaphore, 1);
 		if (ACPI_FAILURE(status)) {
-			ACPI_REPORT_ERROR(("Could not signal method semaphore\n"));
+			ACPI_ERROR((AE_INFO,
+				    "Could not signal method semaphore"));
 
 			/* Ignore error and continue cleanup */
 		}
 	}
 
+	/*
+	 * There are no more threads executing this method.  Perform
+	 * additional cleanup.
+	 *
+	 * The method Node is stored in the walk state
+	 */
+	method_node = walk_state->method_node;
+
+	/* Lock namespace for possible update */
+
+	status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE);
+	if (ACPI_FAILURE(status)) {
+		goto exit;
+	}
+
+	/*
+	 * Delete any namespace entries created immediately underneath
+	 * the method
+	 */
+	if (method_node->child) {
+		acpi_ns_delete_namespace_subtree(method_node);
+	}
+
+	/*
+	 * Delete any namespace entries created anywhere else within
+	 * the namespace by the execution of this method
+	 */
+	acpi_ns_delete_namespace_by_owner(walk_state->method_desc->method.
+					  owner_id);
+	status = acpi_ut_release_mutex(ACPI_MTX_NAMESPACE);
+
+	/* Are there any other threads currently executing this method? */
+
 	if (walk_state->method_desc->method.thread_count) {
+		/*
+		 * Additional threads. Do not release the owner_id in this case,
+		 * we immediately reuse it for the next thread executing this method
+		 */
 		ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
-				  "*** Not deleting method namespace, there are still %d threads\n",
+				  "*** Completed execution of one thread, %d threads remaining\n",
 				  walk_state->method_desc->method.
 				  thread_count));
-	} else {		/* This is the last executing thread */
+	} else {
+		/* This is the only executing thread for this method */
 
 		/*
 		 * Support to dynamically change a method from not_serialized to
-		 * Serialized if it appears that the method is written foolishly and
+		 * Serialized if it appears that the method is incorrectly written and
 		 * does not support multiple thread execution.  The best example of this
 		 * is if such a method creates namespace objects and blocks.  A second
 		 * thread will fail with an AE_ALREADY_EXISTS exception
@@ -570,34 +541,8 @@ void acpi_ds_terminate_control_method(struct acpi_walk_state *walk_state)
 							  semaphore);
 		}
 
-		/*
-		 * There are no more threads executing this method.  Perform
-		 * additional cleanup.
-		 *
-		 * The method Node is stored in the walk state
-		 */
-		method_node = walk_state->method_node;
-
-		/*
-		 * Delete any namespace entries created immediately underneath
-		 * the method
-		 */
-		status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE);
-		if (ACPI_FAILURE(status)) {
-			goto exit;
-		}
-
-		if (method_node->child) {
-			acpi_ns_delete_namespace_subtree(method_node);
-		}
+		/* No more threads, we can free the owner_id */
 
-		/*
-		 * Delete any namespace entries created anywhere else within
-		 * the namespace
-		 */
-		acpi_ns_delete_namespace_by_owner(walk_state->method_desc->
-						  method.owner_id);
-		status = acpi_ut_release_mutex(ACPI_MTX_NAMESPACE);
 		acpi_ut_release_owner_id(&walk_state->method_desc->method.
 					 owner_id);
 	}
@@ -606,3 +551,140 @@ void acpi_ds_terminate_control_method(struct acpi_walk_state *walk_state)
 	(void)acpi_ut_release_mutex(ACPI_MTX_PARSER);
 	return_VOID;
 }
+
+#ifdef ACPI_INIT_PARSE_METHODS
+	/*
+	 * Note 11/2005: Removed this code to parse all methods during table
+	 * load because it causes problems if there are any errors during the
+	 * parse. Also, it seems like overkill and we probably don't want to
+	 * abort a table load because of an issue with a single method.
+	 */
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ds_parse_method
+ *
+ * PARAMETERS:  Node        - Method node
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Parse the AML that is associated with the method.
+ *
+ * MUTEX:       Assumes parser is locked
+ *
+ ******************************************************************************/
+
+acpi_status acpi_ds_parse_method(struct acpi_namespace_node *node)
+{
+	acpi_status status;
+	union acpi_operand_object *obj_desc;
+	union acpi_parse_object *op;
+	struct acpi_walk_state *walk_state;
+
+	ACPI_FUNCTION_TRACE_PTR("ds_parse_method", node);
+
+	/* Parameter Validation */
+
+	if (!node) {
+		return_ACPI_STATUS(AE_NULL_ENTRY);
+	}
+
+	ACPI_DEBUG_PRINT((ACPI_DB_PARSE,
+			  "**** Parsing [%4.4s] **** named_obj=%p\n",
+			  acpi_ut_get_node_name(node), node));
+
+	/* Extract the method object from the method Node */
+
+	obj_desc = acpi_ns_get_attached_object(node);
+	if (!obj_desc) {
+		return_ACPI_STATUS(AE_NULL_OBJECT);
+	}
+
+	/* Create a mutex for the method if there is a concurrency limit */
+
+	if ((obj_desc->method.concurrency != ACPI_INFINITE_CONCURRENCY) &&
+	    (!obj_desc->method.semaphore)) {
+		status = acpi_os_create_semaphore(obj_desc->method.concurrency,
+						  obj_desc->method.concurrency,
+						  &obj_desc->method.semaphore);
+		if (ACPI_FAILURE(status)) {
+			return_ACPI_STATUS(status);
+		}
+	}
+
+	/*
+	 * Allocate a new parser op to be the root of the parsed
+	 * method tree
+	 */
+	op = acpi_ps_alloc_op(AML_METHOD_OP);
+	if (!op) {
+		return_ACPI_STATUS(AE_NO_MEMORY);
+	}
+
+	/* Init new op with the method name and pointer back to the Node */
+
+	acpi_ps_set_name(op, node->name.integer);
+	op->common.node = node;
+
+	/*
+	 * Get a new owner_id for objects created by this method. Namespace
+	 * objects (such as Operation Regions) can be created during the
+	 * first pass parse.
+	 */
+	status = acpi_ut_allocate_owner_id(&obj_desc->method.owner_id);
+	if (ACPI_FAILURE(status)) {
+		goto cleanup;
+	}
+
+	/* Create and initialize a new walk state */
+
+	walk_state =
+	    acpi_ds_create_walk_state(obj_desc->method.owner_id, NULL, NULL,
+				      NULL);
+	if (!walk_state) {
+		status = AE_NO_MEMORY;
+		goto cleanup2;
+	}
+
+	status = acpi_ds_init_aml_walk(walk_state, op, node,
+				       obj_desc->method.aml_start,
+				       obj_desc->method.aml_length, NULL, 1);
+	if (ACPI_FAILURE(status)) {
+		acpi_ds_delete_walk_state(walk_state);
+		goto cleanup2;
+	}
+
+	/*
+	 * Parse the method, first pass
+	 *
+	 * The first pass load is where newly declared named objects are added into
+	 * the namespace.  Actual evaluation of the named objects (what would be
+	 * called a "second pass") happens during the actual execution of the
+	 * method so that operands to the named objects can take on dynamic
+	 * run-time values.
+	 */
+	status = acpi_ps_parse_aml(walk_state);
+	if (ACPI_FAILURE(status)) {
+		goto cleanup2;
+	}
+
+	ACPI_DEBUG_PRINT((ACPI_DB_PARSE,
+			  "**** [%4.4s] Parsed **** named_obj=%p Op=%p\n",
+			  acpi_ut_get_node_name(node), node, op));
+
+	/*
+	 * Delete the parse tree. We simply re-parse the method for every
+	 * execution since there isn't much overhead (compared to keeping lots
+	 * of parse trees around)
+	 */
+	acpi_ns_delete_namespace_subtree(node);
+	acpi_ns_delete_namespace_by_owner(obj_desc->method.owner_id);
+
+      cleanup2:
+	acpi_ut_release_owner_id(&obj_desc->method.owner_id);
+
+      cleanup:
+	acpi_ps_delete_parse_tree(op);
+	return_ACPI_STATUS(status);
+}
+#endif

drivers/acpi/dispatcher/dsmthdat.c

@@ -5,7 +5,7 @@
  ******************************************************************************/
 
 /*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -260,9 +260,9 @@ acpi_ds_method_data_get_node(u16 opcode,
 	case AML_LOCAL_OP:
 
 		if (index > ACPI_METHOD_MAX_LOCAL) {
-			ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-					  "Local index %d is invalid (max %d)\n",
-					  index, ACPI_METHOD_MAX_LOCAL));
+			ACPI_ERROR((AE_INFO,
+				    "Local index %d is invalid (max %d)",
+				    index, ACPI_METHOD_MAX_LOCAL));
 			return_ACPI_STATUS(AE_AML_INVALID_INDEX);
 		}
 
@@ -274,9 +274,9 @@ acpi_ds_method_data_get_node(u16 opcode,
 	case AML_ARG_OP:
 
 		if (index > ACPI_METHOD_MAX_ARG) {
-			ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-					  "Arg index %d is invalid (max %d)\n",
-					  index, ACPI_METHOD_MAX_ARG));
+			ACPI_ERROR((AE_INFO,
+				    "Arg index %d is invalid (max %d)",
+				    index, ACPI_METHOD_MAX_ARG));
 			return_ACPI_STATUS(AE_AML_INVALID_INDEX);
 		}
 
@@ -286,8 +286,7 @@ acpi_ds_method_data_get_node(u16 opcode,
 		break;
 
 	default:
-		ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Opcode %d is invalid\n",
-				  opcode));
+		ACPI_ERROR((AE_INFO, "Opcode %d is invalid", opcode));
 		return_ACPI_STATUS(AE_AML_BAD_OPCODE);
 	}
 
@@ -378,8 +377,7 @@ acpi_ds_method_data_get_value(u16 opcode,
 	/* Validate the object descriptor */
 
 	if (!dest_desc) {
-		ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-				  "Null object descriptor pointer\n"));
+		ACPI_ERROR((AE_INFO, "Null object descriptor pointer"));
 		return_ACPI_STATUS(AE_BAD_PARAMETER);
 	}
 
@@ -424,23 +422,24 @@ acpi_ds_method_data_get_value(u16 opcode,
 			switch (opcode) {
 			case AML_ARG_OP:
 
-				ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-						  "Uninitialized Arg[%d] at node %p\n",
-						  index, node));
+				ACPI_ERROR((AE_INFO,
+					    "Uninitialized Arg[%d] at node %p",
+					    index, node));
 
 				return_ACPI_STATUS(AE_AML_UNINITIALIZED_ARG);
 
 			case AML_LOCAL_OP:
 
-				ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-						  "Uninitialized Local[%d] at node %p\n",
-						  index, node));
+				ACPI_ERROR((AE_INFO,
+					    "Uninitialized Local[%d] at node %p",
+					    index, node));
 
 				return_ACPI_STATUS(AE_AML_UNINITIALIZED_LOCAL);
 
 			default:
-				ACPI_REPORT_ERROR(("Not Arg/Local opcode: %X\n",
-						   opcode));
+				ACPI_ERROR((AE_INFO,
+					    "Not a Arg/Local opcode: %X",
+					    opcode));
 				return_ACPI_STATUS(AE_AML_INTERNAL);
 			}
 	}

drivers/acpi/dispatcher/dsobject.c

@@ -5,7 +5,7 @@
  *****************************************************************************/
 
 /*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -51,6 +51,7 @@
 #define _COMPONENT          ACPI_DISPATCHER
 ACPI_MODULE_NAME("dsobject")
 
+/* Local prototypes */
 static acpi_status
 acpi_ds_build_internal_object(struct acpi_walk_state *walk_state,
 			      union acpi_parse_object *op,
@@ -85,7 +86,7 @@ acpi_ds_build_internal_object(struct acpi_walk_state *walk_state,
 	*obj_desc_ptr = NULL;
 	if (op->common.aml_opcode == AML_INT_NAMEPATH_OP) {
 		/*
-		 * This is an named object reference.  If this name was
+		 * This is a named object reference. If this name was
 		 * previously looked up in the namespace, it was stored in this op.
 		 * Otherwise, go ahead and look it up now
 		 */
@@ -96,18 +97,48 @@ acpi_ds_build_internal_object(struct acpi_walk_state *walk_state,
 						ACPI_IMODE_EXECUTE,
 						ACPI_NS_SEARCH_PARENT |
 						ACPI_NS_DONT_OPEN_SCOPE, NULL,
-						(struct acpi_namespace_node **)
-						&(op->common.node));
-
+						ACPI_CAST_INDIRECT_PTR(struct
+								       acpi_namespace_node,
+								       &(op->
+									 common.
+									 node)));
 			if (ACPI_FAILURE(status)) {
-				ACPI_REPORT_NSERROR(op->common.value.string,
-						    status);
+				/* Check if we are resolving a named reference within a package */
+
+				if ((status == AE_NOT_FOUND)
+				    && (acpi_gbl_enable_interpreter_slack)
+				    &&
+				    ((op->common.parent->common.aml_opcode ==
+				      AML_PACKAGE_OP)
+				     || (op->common.parent->common.aml_opcode ==
+					 AML_VAR_PACKAGE_OP))) {
+					/*
+					 * We didn't find the target and we are populating elements
+					 * of a package - ignore if slack enabled. Some ASL code
+					 * contains dangling invalid references in packages and
+					 * expects that no exception will be issued. Leave the
+					 * element as a null element. It cannot be used, but it
+					 * can be overwritten by subsequent ASL code - this is
+					 * typically the case.
+					 */
+					ACPI_DEBUG_PRINT((ACPI_DB_INFO,
+							  "Ignoring unresolved reference in package [%4.4s]\n",
+							  walk_state->
+							  scope_info->scope.
+							  node->name.ascii));
+
+					return_ACPI_STATUS(AE_OK);
+				} else {
+					ACPI_ERROR_NAMESPACE(op->common.value.
+							     string, status);
+				}
+
 				return_ACPI_STATUS(status);
 			}
 		}
 	}
 
-	/* Create and init the internal ACPI object */
+	/* Create and init a new internal ACPI object */
 
 	obj_desc = acpi_ut_create_internal_object((acpi_ps_get_opcode_info
 						   (op->common.aml_opcode))->
@@ -157,13 +188,13 @@ acpi_ds_build_internal_buffer_obj(struct acpi_walk_state *walk_state,
 
 	ACPI_FUNCTION_TRACE("ds_build_internal_buffer_obj");
 
+	/*
+	 * If we are evaluating a Named buffer object "Name (xxxx, Buffer)".
+	 * The buffer object already exists (from the NS node), otherwise it must
+	 * be created.
+	 */
 	obj_desc = *obj_desc_ptr;
-	if (obj_desc) {
-		/*
-		 * We are evaluating a Named buffer object "Name (xxxx, Buffer)".
-		 * The buffer object already exists (from the NS node)
-		 */
-	} else {
+	if (!obj_desc) {
 		/* Create a new buffer object */
 
 		obj_desc = acpi_ut_create_internal_object(ACPI_TYPE_BUFFER);
@@ -183,10 +214,9 @@ acpi_ds_build_internal_buffer_obj(struct acpi_walk_state *walk_state,
 	byte_list = arg->named.next;
 	if (byte_list) {
 		if (byte_list->common.aml_opcode != AML_INT_BYTELIST_OP) {
-			ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-					  "Expecting bytelist, got AML opcode %X in op %p\n",
-					  byte_list->common.aml_opcode,
-					  byte_list));
+			ACPI_ERROR((AE_INFO,
+				    "Expecting bytelist, got AML opcode %X in op %p",
+				    byte_list->common.aml_opcode, byte_list));
 
 			acpi_ut_remove_reference(obj_desc);
 			return (AE_TYPE);
@@ -259,7 +289,7 @@ acpi_ds_build_internal_package_obj(struct acpi_walk_state *walk_state,
 	union acpi_operand_object *obj_desc = NULL;
 	u32 package_list_length;
 	acpi_status status = AE_OK;
-	u32 i;
+	acpi_native_uint i;
 
 	ACPI_FUNCTION_TRACE("ds_build_internal_package_obj");
 
@@ -271,13 +301,12 @@ acpi_ds_build_internal_package_obj(struct acpi_walk_state *walk_state,
 		parent = parent->common.parent;
 	}
 
+	/*
+	 * If we are evaluating a Named package object "Name (xxxx, Package)",
+	 * the package object already exists, otherwise it must be created.
+	 */
 	obj_desc = *obj_desc_ptr;
-	if (obj_desc) {
-		/*
-		 * We are evaluating a Named package object "Name (xxxx, Package)".
-		 * Get the existing package object from the NS node
-		 */
-	} else {
+	if (!obj_desc) {
 		obj_desc = acpi_ut_create_internal_object(ACPI_TYPE_PACKAGE);
 		*obj_desc_ptr = obj_desc;
 		if (!obj_desc) {
@@ -291,11 +320,9 @@ acpi_ds_build_internal_package_obj(struct acpi_walk_state *walk_state,
 
 	/* Count the number of items in the package list */
 
-	package_list_length = 0;
 	arg = op->common.value.arg;
 	arg = arg->common.next;
-	while (arg) {
-		package_list_length++;
+	for (package_list_length = 0; arg; package_list_length++) {
 		arg = arg->common.next;
 	}
 
@@ -322,12 +349,11 @@ acpi_ds_build_internal_package_obj(struct acpi_walk_state *walk_state,
 	}
 
 	/*
-	 * Now init the elements of the package
+	 * Initialize all elements of the package
 	 */
-	i = 0;
 	arg = op->common.value.arg;
 	arg = arg->common.next;
-	while (arg) {
+	for (i = 0; arg; i++) {
 		if (arg->common.aml_opcode == AML_INT_RETURN_VALUE_OP) {
 			/* Object (package or buffer) is already built */
 
@@ -340,8 +366,6 @@ acpi_ds_build_internal_package_obj(struct acpi_walk_state *walk_state,
 							       package.
 							       elements[i]);
 		}
-
-		i++;
 		arg = arg->common.next;
 	}
 
@@ -518,9 +542,9 @@ acpi_ds_init_object_from_op(struct acpi_walk_state *walk_state,
 
 			default:
 
-				ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-						  "Unknown constant opcode %X\n",
-						  opcode));
+				ACPI_ERROR((AE_INFO,
+					    "Unknown constant opcode %X",
+					    opcode));
 				status = AE_AML_OPERAND_TYPE;
 				break;
 			}
@@ -535,9 +559,8 @@ acpi_ds_init_object_from_op(struct acpi_walk_state *walk_state,
 			break;
 
 		default:
-			ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-					  "Unknown Integer type %X\n",
-					  op_info->type));
+			ACPI_ERROR((AE_INFO, "Unknown Integer type %X",
+				    op_info->type));
 			status = AE_AML_OPERAND_TYPE;
 			break;
 		}
@@ -615,9 +638,8 @@ acpi_ds_init_object_from_op(struct acpi_walk_state *walk_state,
 
 	default:
 
-		ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-				  "Unimplemented data type: %X\n",
-				  ACPI_GET_OBJECT_TYPE(obj_desc)));
+		ACPI_ERROR((AE_INFO, "Unimplemented data type: %X",
+			    ACPI_GET_OBJECT_TYPE(obj_desc)));
 
 		status = AE_AML_OPERAND_TYPE;
 		break;

drivers/acpi/dispatcher/dsopcode.c

@@ -6,7 +6,7 @@
  *****************************************************************************/
 
 /*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -245,7 +245,9 @@ acpi_status acpi_ds_get_buffer_arguments(union acpi_operand_object *obj_desc)
 
 	node = obj_desc->buffer.node;
 	if (!node) {
-		ACPI_REPORT_ERROR(("No pointer back to NS node in buffer obj %p\n", obj_desc));
+		ACPI_ERROR((AE_INFO,
+			    "No pointer back to NS node in buffer obj %p",
+			    obj_desc));
 		return_ACPI_STATUS(AE_AML_INTERNAL);
 	}
 
@@ -287,8 +289,9 @@ acpi_status acpi_ds_get_package_arguments(union acpi_operand_object *obj_desc)
 
 	node = obj_desc->package.node;
 	if (!node) {
-		ACPI_REPORT_ERROR(("No pointer back to NS node in package %p\n",
-				   obj_desc));
+		ACPI_ERROR((AE_INFO,
+			    "No pointer back to NS node in package %p",
+			    obj_desc));
 		return_ACPI_STATUS(AE_AML_INTERNAL);
 	}
 
@@ -413,9 +416,9 @@ acpi_ds_init_buffer_field(u16 aml_opcode,
 	/* Host object must be a Buffer */
 
 	if (ACPI_GET_OBJECT_TYPE(buffer_desc) != ACPI_TYPE_BUFFER) {
-		ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-				  "Target of Create Field is not a Buffer object - %s\n",
-				  acpi_ut_get_object_type_name(buffer_desc)));
+		ACPI_ERROR((AE_INFO,
+			    "Target of Create Field is not a Buffer object - %s",
+			    acpi_ut_get_object_type_name(buffer_desc)));
 
 		status = AE_AML_OPERAND_TYPE;
 		goto cleanup;
@@ -427,10 +430,10 @@ acpi_ds_init_buffer_field(u16 aml_opcode,
 	 * after resolution in acpi_ex_resolve_operands().
 	 */
 	if (ACPI_GET_DESCRIPTOR_TYPE(result_desc) != ACPI_DESC_TYPE_NAMED) {
-		ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-				  "(%s) destination not a NS Node [%s]\n",
-				  acpi_ps_get_opcode_name(aml_opcode),
-				  acpi_ut_get_descriptor_name(result_desc)));
+		ACPI_ERROR((AE_INFO,
+			    "(%s) destination not a NS Node [%s]",
+			    acpi_ps_get_opcode_name(aml_opcode),
+			    acpi_ut_get_descriptor_name(result_desc)));
 
 		status = AE_AML_OPERAND_TYPE;
 		goto cleanup;
@@ -453,8 +456,8 @@ acpi_ds_init_buffer_field(u16 aml_opcode,
 		/* Must have a valid (>0) bit count */
 
 		if (bit_count == 0) {
-			ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-					  "Attempt to create_field of length 0\n"));
+			ACPI_ERROR((AE_INFO,
+				    "Attempt to create_field of length zero"));
 			status = AE_AML_OPERAND_VALUE;
 			goto cleanup;
 		}
@@ -507,9 +510,8 @@ acpi_ds_init_buffer_field(u16 aml_opcode,
 
 	default:
 
-		ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-				  "Unknown field creation opcode %02x\n",
-				  aml_opcode));
+		ACPI_ERROR((AE_INFO,
+			    "Unknown field creation opcode %02x", aml_opcode));
 		status = AE_AML_BAD_OPCODE;
 		goto cleanup;
 	}
@@ -517,13 +519,12 @@ acpi_ds_init_buffer_field(u16 aml_opcode,
 	/* Entire field must fit within the current length of the buffer */
 
 	if ((bit_offset + bit_count) > (8 * (u32) buffer_desc->buffer.length)) {
-		ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-				  "Field [%4.4s] size %d exceeds Buffer [%4.4s] size %d (bits)\n",
-				  acpi_ut_get_node_name(result_desc),
-				  bit_offset + bit_count,
-				  acpi_ut_get_node_name(buffer_desc->buffer.
-							node),
-				  8 * (u32) buffer_desc->buffer.length));
+		ACPI_ERROR((AE_INFO,
+			    "Field [%4.4s] at %d exceeds Buffer [%4.4s] size %d (bits)",
+			    acpi_ut_get_node_name(result_desc),
+			    bit_offset + bit_count,
+			    acpi_ut_get_node_name(buffer_desc->buffer.node),
+			    8 * (u32) buffer_desc->buffer.length));
 		status = AE_AML_BUFFER_LIMIT;
 		goto cleanup;
 	}
@@ -629,9 +630,9 @@ acpi_ds_eval_buffer_field_operands(struct acpi_walk_state *walk_state,
 			   "after acpi_ex_resolve_operands");
 
 	if (ACPI_FAILURE(status)) {
-		ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "(%s) bad operand(s) (%X)\n",
-				  acpi_ps_get_opcode_name(op->common.
-							  aml_opcode), status));
+		ACPI_ERROR((AE_INFO, "(%s) bad operand(s) (%X)",
+			    acpi_ps_get_opcode_name(op->common.aml_opcode),
+			    status));
 
 		return_ACPI_STATUS(status);
 	}
@@ -1155,9 +1156,8 @@ acpi_ds_exec_end_control_op(struct acpi_walk_state * walk_state,
 
 	default:
 
-		ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-				  "Unknown control opcode=%X Op=%p\n",
-				  op->common.aml_opcode, op));
+		ACPI_ERROR((AE_INFO, "Unknown control opcode=%X Op=%p",
+			    op->common.aml_opcode, op));
 
 		status = AE_AML_BAD_OPCODE;
 		break;

drivers/acpi/dispatcher/dsutils.c

@@ -5,7 +5,7 @@
  ******************************************************************************/
 
 /*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -176,8 +176,8 @@ acpi_ds_is_result_used(union acpi_parse_object * op,
 	/* Must have both an Op and a Result Object */
 
 	if (!op) {
-		ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Null Op\n"));
-		return_VALUE(TRUE);
+		ACPI_ERROR((AE_INFO, "Null Op"));
+		return_UINT8(TRUE);
 	}
 
 	/*
@@ -208,7 +208,7 @@ acpi_ds_is_result_used(union acpi_parse_object * op,
 				  "At Method level, result of [%s] not used\n",
 				  acpi_ps_get_opcode_name(op->common.
 							  aml_opcode)));
-		return_VALUE(FALSE);
+		return_UINT8(FALSE);
 	}
 
 	/* Get info on the parent. The root_op is AML_SCOPE */
@@ -216,9 +216,8 @@ acpi_ds_is_result_used(union acpi_parse_object * op,
 	parent_info =
 	    acpi_ps_get_opcode_info(op->common.parent->common.aml_opcode);
 	if (parent_info->class == AML_CLASS_UNKNOWN) {
-		ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-				  "Unknown parent opcode. Op=%p\n", op));
-		return_VALUE(FALSE);
+		ACPI_ERROR((AE_INFO, "Unknown parent opcode Op=%p", op));
+		return_UINT8(FALSE);
 	}
 
 	/*
@@ -304,7 +303,7 @@ acpi_ds_is_result_used(union acpi_parse_object * op,
 			  acpi_ps_get_opcode_name(op->common.parent->common.
 						  aml_opcode), op));
 
-	return_VALUE(TRUE);
+	return_UINT8(TRUE);
 
       result_not_used:
 	ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
@@ -313,7 +312,7 @@ acpi_ds_is_result_used(union acpi_parse_object * op,
 			  acpi_ps_get_opcode_name(op->common.parent->common.
 						  aml_opcode), op));
 
-	return_VALUE(FALSE);
+	return_UINT8(FALSE);
 }
 
 /*******************************************************************************
@@ -344,7 +343,7 @@ acpi_ds_delete_result_if_not_used(union acpi_parse_object *op,
 	ACPI_FUNCTION_TRACE_PTR("ds_delete_result_if_not_used", result_obj);
 
 	if (!op) {
-		ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Null Op\n"));
+		ACPI_ERROR((AE_INFO, "Null Op"));
 		return_VOID;
 	}
 
@@ -567,7 +566,7 @@ acpi_ds_create_operand(struct acpi_walk_state *walk_state,
 			}
 
 			if (ACPI_FAILURE(status)) {
-				ACPI_REPORT_NSERROR(name_string, status);
+				ACPI_ERROR_NAMESPACE(name_string, status);
 			}
 		}
 
@@ -616,7 +615,7 @@ acpi_ds_create_operand(struct acpi_walk_state *walk_state,
 
 		if (op_info->flags & AML_HAS_RETVAL) {
 			ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
-					  "Argument previously created, already stacked \n"));
+					  "Argument previously created, already stacked\n"));
 
 			ACPI_DEBUGGER_EXEC(acpi_db_display_argument_object
 					   (walk_state->
@@ -635,10 +634,8 @@ acpi_ds_create_operand(struct acpi_walk_state *walk_state,
 				 * Only error is underflow, and this indicates
 				 * a missing or null operand!
 				 */
-				ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-						  "Missing or null operand, %s\n",
-						  acpi_format_exception
-						  (status)));
+				ACPI_EXCEPTION((AE_INFO, status,
+						"Missing or null operand"));
 				return_ACPI_STATUS(status);
 			}
 		} else {
@@ -730,7 +727,7 @@ acpi_ds_create_operands(struct acpi_walk_state *walk_state,
 	 */
 	(void)acpi_ds_obj_stack_pop_and_delete(arg_count, walk_state);
 
-	ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "While creating Arg %d - %s\n",
-			  (arg_count + 1), acpi_format_exception(status)));
+	ACPI_EXCEPTION((AE_INFO, status, "While creating Arg %d",
+			(arg_count + 1)));
 	return_ACPI_STATUS(status);
 }

drivers/acpi/dispatcher/dswexec.c

@@ -6,7 +6,7 @@
  *****************************************************************************/
 
 /*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -100,9 +100,8 @@ acpi_ds_get_predicate_value(struct acpi_walk_state *walk_state,
 	if (result_obj) {
 		status = acpi_ds_result_pop(&obj_desc, walk_state);
 		if (ACPI_FAILURE(status)) {
-			ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-					  "Could not get result from predicate evaluation, %s\n",
-					  acpi_format_exception(status)));
+			ACPI_EXCEPTION((AE_INFO, status,
+					"Could not get result from predicate evaluation"));
 
 			return_ACPI_STATUS(status);
 		}
@@ -123,9 +122,9 @@ acpi_ds_get_predicate_value(struct acpi_walk_state *walk_state,
 	}
 
 	if (!obj_desc) {
-		ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-				  "No predicate obj_desc=%p State=%p\n",
-				  obj_desc, walk_state));
+		ACPI_ERROR((AE_INFO,
+			    "No predicate obj_desc=%p State=%p",
+			    obj_desc, walk_state));
 
 		return_ACPI_STATUS(AE_AML_NO_OPERAND);
 	}
@@ -140,10 +139,10 @@ acpi_ds_get_predicate_value(struct acpi_walk_state *walk_state,
 	}
 
 	if (ACPI_GET_OBJECT_TYPE(local_obj_desc) != ACPI_TYPE_INTEGER) {
-		ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-				  "Bad predicate (not an integer) obj_desc=%p State=%p Type=%X\n",
-				  obj_desc, walk_state,
-				  ACPI_GET_OBJECT_TYPE(obj_desc)));
+		ACPI_ERROR((AE_INFO,
+			    "Bad predicate (not an integer) obj_desc=%p State=%p Type=%X",
+			    obj_desc, walk_state,
+			    ACPI_GET_OBJECT_TYPE(obj_desc)));
 
 		status = AE_AML_OPERAND_TYPE;
 		goto cleanup;
@@ -314,12 +313,13 @@ acpi_ds_exec_begin_op(struct acpi_walk_state *walk_state,
 
 	case AML_CLASS_EXECUTE:
 	case AML_CLASS_CREATE:
-
 		/*
 		 * Most operators with arguments.
 		 * Start a new result/operand state
 		 */
-		status = acpi_ds_result_stack_push(walk_state);
+		if (walk_state->opcode != AML_CREATE_FIELD_OP) {
+			status = acpi_ds_result_stack_push(walk_state);
+		}
 		break;
 
 	default:
@@ -361,8 +361,8 @@ acpi_status acpi_ds_exec_end_op(struct acpi_walk_state *walk_state)
 	op_class = walk_state->op_info->class;
 
 	if (op_class == AML_CLASS_UNKNOWN) {
-		ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Unknown opcode %X\n",
-				  op->common.aml_opcode));
+		ACPI_ERROR((AE_INFO, "Unknown opcode %X",
+			    op->common.aml_opcode));
 		return_ACPI_STATUS(AE_NOT_IMPLEMENTED);
 	}
 
@@ -452,12 +452,10 @@ acpi_status acpi_ds_exec_end_op(struct acpi_walk_state *walk_state)
 				walk_state->operands[1]->reference.offset)) {
 				status = AE_OK;
 			} else {
-				ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-						  "[%s]: Could not resolve operands, %s\n",
-						  acpi_ps_get_opcode_name
-						  (walk_state->opcode),
-						  acpi_format_exception
-						  (status)));
+				ACPI_EXCEPTION((AE_INFO, status,
+						"While resolving operands for [%s]",
+						acpi_ps_get_opcode_name
+						(walk_state->opcode)));
 			}
 		}
 
@@ -676,8 +674,8 @@ acpi_status acpi_ds_exec_end_op(struct acpi_walk_state *walk_state)
 
 		case AML_TYPE_UNDEFINED:
 
-			ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-					  "Undefined opcode type Op=%p\n", op));
+			ACPI_ERROR((AE_INFO,
+				    "Undefined opcode type Op=%p", op));
 			return_ACPI_STATUS(AE_NOT_IMPLEMENTED);
 
 		case AML_TYPE_BOGUS:
@@ -689,10 +687,10 @@ acpi_status acpi_ds_exec_end_op(struct acpi_walk_state *walk_state)
 
 		default:
 
-			ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-					  "Unimplemented opcode, class=%X type=%X Opcode=%X Op=%p\n",
-					  op_class, op_type,
-					  op->common.aml_opcode, op));
+			ACPI_ERROR((AE_INFO,
+				    "Unimplemented opcode, class=%X type=%X Opcode=%X Op=%p",
+				    op_class, op_type, op->common.aml_opcode,
+				    op));
 
 			status = AE_NOT_IMPLEMENTED;
 			break;
@@ -723,20 +721,6 @@ acpi_status acpi_ds_exec_end_op(struct acpi_walk_state *walk_state)
 
       cleanup:
 
-	/* Invoke exception handler on error */
-
-	if (ACPI_FAILURE(status) &&
-	    acpi_gbl_exception_handler && !(status & AE_CODE_CONTROL)) {
-		acpi_ex_exit_interpreter();
-		status = acpi_gbl_exception_handler(status,
-						    walk_state->method_node->
-						    name.integer,
-						    walk_state->opcode,
-						    walk_state->aml_offset,
-						    NULL);
-		(void)acpi_ex_enter_interpreter();
-	}
-
 	if (walk_state->result_obj) {
 		/* Break to debugger to display result */
 
@@ -758,18 +742,14 @@ acpi_status acpi_ds_exec_end_op(struct acpi_walk_state *walk_state)
 	}
 #endif
 
-	/* Always clear the object stack */
-
-	walk_state->num_operands = 0;
-
-#ifdef ACPI_DISASSEMBLER
-
-	/* On error, display method locals/args */
+	/* Invoke exception handler on error */
 
 	if (ACPI_FAILURE(status)) {
-		acpi_dm_dump_method_info(status, walk_state, op);
+		status = acpi_ds_method_error(status, walk_state);
 	}
-#endif
 
+	/* Always clear the object stack */
+
+	walk_state->num_operands = 0;
 	return_ACPI_STATUS(status);
 }

drivers/acpi/dispatcher/dswload.c

@@ -5,7 +5,7 @@
  *****************************************************************************/
 
 /*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -127,7 +127,7 @@ acpi_ds_load1_begin_op(struct acpi_walk_state * walk_state,
 	char *path;
 	u32 flags;
 
-	ACPI_FUNCTION_NAME("ds_load1_begin_op");
+	ACPI_FUNCTION_TRACE("ds_load1_begin_op");
 
 	op = walk_state->op;
 	ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH, "Op=%p State=%p\n", op,
@@ -138,14 +138,14 @@ acpi_ds_load1_begin_op(struct acpi_walk_state * walk_state,
 	if (op) {
 		if (!(walk_state->op_info->flags & AML_NAMED)) {
 			*out_op = op;
-			return (AE_OK);
+			return_ACPI_STATUS(AE_OK);
 		}
 
 		/* Check if this object has already been installed in the namespace */
 
 		if (op->common.node) {
 			*out_op = op;
-			return (AE_OK);
+			return_ACPI_STATUS(AE_OK);
 		}
 	}
 
@@ -187,8 +187,8 @@ acpi_ds_load1_begin_op(struct acpi_walk_state * walk_state,
 		}
 #endif
 		if (ACPI_FAILURE(status)) {
-			ACPI_REPORT_NSERROR(path, status);
-			return (status);
+			ACPI_ERROR_NAMESPACE(path, status);
+			return_ACPI_STATUS(status);
 		}
 
 		/*
@@ -233,9 +233,11 @@ acpi_ds_load1_begin_op(struct acpi_walk_state * walk_state,
 
 			/* All other types are an error */
 
-			ACPI_REPORT_ERROR(("Invalid type (%s) for target of Scope operator [%4.4s] (Cannot override)\n", acpi_ut_get_type_name(node->type), path));
+			ACPI_ERROR((AE_INFO,
+				    "Invalid type (%s) for target of Scope operator [%4.4s] (Cannot override)",
+				    acpi_ut_get_type_name(node->type), path));
 
-			return (AE_AML_OPERAND_TYPE);
+			return_ACPI_STATUS(AE_AML_OPERAND_TYPE);
 		}
 		break;
 
@@ -257,6 +259,7 @@ acpi_ds_load1_begin_op(struct acpi_walk_state * walk_state,
 		 *       buffer_field, or Package), the name of the object is already
 		 *       in the namespace.
 		 */
+
 		if (walk_state->deferred_node) {
 			/* This name is already in the namespace, get the node */
 
@@ -265,6 +268,16 @@ acpi_ds_load1_begin_op(struct acpi_walk_state * walk_state,
 			break;
 		}
 
+		/*
+		 * If we are executing a method, do not create any namespace objects
+		 * during the load phase, only during execution.
+		 */
+		if (walk_state->method_node) {
+			node = NULL;
+			status = AE_OK;
+			break;
+		}
+
 		flags = ACPI_NS_NO_UPSEARCH;
 		if ((walk_state->opcode != AML_SCOPE_OP) &&
 		    (!(walk_state->parse_flags & ACPI_PARSE_DEFERRED_OP))) {
@@ -289,8 +302,8 @@ acpi_ds_load1_begin_op(struct acpi_walk_state * walk_state,
 				   ACPI_IMODE_LOAD_PASS1, flags, walk_state,
 				   &(node));
 		if (ACPI_FAILURE(status)) {
-			ACPI_REPORT_NSERROR(path, status);
-			return (status);
+			ACPI_ERROR_NAMESPACE(path, status);
+			return_ACPI_STATUS(status);
 		}
 		break;
 	}
@@ -302,28 +315,29 @@ acpi_ds_load1_begin_op(struct acpi_walk_state * walk_state,
 
 		op = acpi_ps_alloc_op(walk_state->opcode);
 		if (!op) {
-			return (AE_NO_MEMORY);
+			return_ACPI_STATUS(AE_NO_MEMORY);
 		}
 	}
 
-	/* Initialize */
-
-	op->named.name = node->name.integer;
+	/* Initialize the op */
 
 #if (defined (ACPI_NO_METHOD_EXECUTION) || defined (ACPI_CONSTANT_EVAL_ONLY))
-	op->named.path = (u8 *) path;
+	op->named.path = ACPI_CAST_PTR(u8, path);
 #endif
 
-	/*
-	 * Put the Node in the "op" object that the parser uses, so we
-	 * can get it again quickly when this scope is closed
-	 */
-	op->common.node = node;
+	if (node) {
+		/*
+		 * Put the Node in the "op" object that the parser uses, so we
+		 * can get it again quickly when this scope is closed
+		 */
+		op->common.node = node;
+		op->named.name = node->name.integer;
+	}
+
 	acpi_ps_append_arg(acpi_ps_get_parent_scope(&walk_state->parser_state),
 			   op);
-
 	*out_op = op;
-	return (status);
+	return_ACPI_STATUS(status);
 }
 
 /*******************************************************************************
@@ -339,13 +353,13 @@ acpi_ds_load1_begin_op(struct acpi_walk_state * walk_state,
  *
  ******************************************************************************/
 
-acpi_status acpi_ds_load1_end_op(struct acpi_walk_state * walk_state)
+acpi_status acpi_ds_load1_end_op(struct acpi_walk_state *walk_state)
 {
 	union acpi_parse_object *op;
 	acpi_object_type object_type;
 	acpi_status status = AE_OK;
 
-	ACPI_FUNCTION_NAME("ds_load1_end_op");
+	ACPI_FUNCTION_TRACE("ds_load1_end_op");
 
 	op = walk_state->op;
 	ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH, "Op=%p State=%p\n", op,
@@ -354,7 +368,7 @@ acpi_status acpi_ds_load1_end_op(struct acpi_walk_state * walk_state)
 	/* We are only interested in opcodes that have an associated name */
 
 	if (!(walk_state->op_info->flags & (AML_NAMED | AML_FIELD))) {
-		return (AE_OK);
+		return_ACPI_STATUS(AE_OK);
 	}
 
 	/* Get the object type to determine if we should pop the scope */
@@ -363,21 +377,37 @@ acpi_status acpi_ds_load1_end_op(struct acpi_walk_state * walk_state)
 
 #ifndef ACPI_NO_METHOD_EXECUTION
 	if (walk_state->op_info->flags & AML_FIELD) {
-		if (walk_state->opcode == AML_FIELD_OP ||
-		    walk_state->opcode == AML_BANK_FIELD_OP ||
-		    walk_state->opcode == AML_INDEX_FIELD_OP) {
-			status = acpi_ds_init_field_objects(op, walk_state);
+		/*
+		 * If we are executing a method, do not create any namespace objects
+		 * during the load phase, only during execution.
+		 */
+		if (!walk_state->method_node) {
+			if (walk_state->opcode == AML_FIELD_OP ||
+			    walk_state->opcode == AML_BANK_FIELD_OP ||
+			    walk_state->opcode == AML_INDEX_FIELD_OP) {
+				status =
+				    acpi_ds_init_field_objects(op, walk_state);
+			}
 		}
-		return (status);
+		return_ACPI_STATUS(status);
 	}
 
-	if (op->common.aml_opcode == AML_REGION_OP) {
-		status = acpi_ex_create_region(op->named.data, op->named.length,
-					       (acpi_adr_space_type)
-					       ((op->common.value.arg)->common.
-						value.integer), walk_state);
-		if (ACPI_FAILURE(status)) {
-			return (status);
+	/*
+	 * If we are executing a method, do not create any namespace objects
+	 * during the load phase, only during execution.
+	 */
+	if (!walk_state->method_node) {
+		if (op->common.aml_opcode == AML_REGION_OP) {
+			status =
+			    acpi_ex_create_region(op->named.data,
+						  op->named.length,
+						  (acpi_adr_space_type)
+						  ((op->common.value.arg)->
+						   common.value.integer),
+						  walk_state);
+			if (ACPI_FAILURE(status)) {
+				return_ACPI_STATUS(status);
+			}
 		}
 	}
 #endif
@@ -391,47 +421,63 @@ acpi_status acpi_ds_load1_end_op(struct acpi_walk_state * walk_state)
 							       common.
 							       aml_opcode))->
 			    object_type;
-			op->common.node->type = (u8) object_type;
+
+			/* Set node type if we have a namespace node */
+
+			if (op->common.node) {
+				op->common.node->type = (u8) object_type;
+			}
 		}
 	}
 
-	if (op->common.aml_opcode == AML_METHOD_OP) {
-		/*
-		 * method_op pkg_length name_string method_flags term_list
-		 *
-		 * Note: We must create the method node/object pair as soon as we
-		 * see the method declaration.  This allows later pass1 parsing
-		 * of invocations of the method (need to know the number of
-		 * arguments.)
-		 */
-		ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
-				  "LOADING-Method: State=%p Op=%p named_obj=%p\n",
-				  walk_state, op, op->named.node));
+	/*
+	 * If we are executing a method, do not create any namespace objects
+	 * during the load phase, only during execution.
+	 */
+	if (!walk_state->method_node) {
+		if (op->common.aml_opcode == AML_METHOD_OP) {
+			/*
+			 * method_op pkg_length name_string method_flags term_list
+			 *
+			 * Note: We must create the method node/object pair as soon as we
+			 * see the method declaration.  This allows later pass1 parsing
+			 * of invocations of the method (need to know the number of
+			 * arguments.)
+			 */
+			ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
+					  "LOADING-Method: State=%p Op=%p named_obj=%p\n",
+					  walk_state, op, op->named.node));
 
-		if (!acpi_ns_get_attached_object(op->named.node)) {
-			walk_state->operands[0] = (void *)op->named.node;
-			walk_state->num_operands = 1;
+			if (!acpi_ns_get_attached_object(op->named.node)) {
+				walk_state->operands[0] =
+				    ACPI_CAST_PTR(void, op->named.node);
+				walk_state->num_operands = 1;
 
-			status =
-			    acpi_ds_create_operands(walk_state,
-						    op->common.value.arg);
-			if (ACPI_SUCCESS(status)) {
-				status = acpi_ex_create_method(op->named.data,
-							       op->named.length,
-							       walk_state);
-			}
-			walk_state->operands[0] = NULL;
-			walk_state->num_operands = 0;
+				status =
+				    acpi_ds_create_operands(walk_state,
+							    op->common.value.
+							    arg);
+				if (ACPI_SUCCESS(status)) {
+					status =
+					    acpi_ex_create_method(op->named.
+								  data,
+								  op->named.
+								  length,
+								  walk_state);
+				}
+				walk_state->operands[0] = NULL;
+				walk_state->num_operands = 0;
 
-			if (ACPI_FAILURE(status)) {
-				return (status);
+				if (ACPI_FAILURE(status)) {
+					return_ACPI_STATUS(status);
+				}
 			}
 		}
 	}
 
-	/* Pop the scope stack */
+	/* Pop the scope stack (only if loading a table) */
 
-	if (acpi_ns_opens_scope(object_type)) {
+	if (!walk_state->method_node && acpi_ns_opens_scope(object_type)) {
 		ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
 				  "(%s): Popping scope for Op %p\n",
 				  acpi_ut_get_type_name(object_type), op));
@@ -439,7 +485,7 @@ acpi_status acpi_ds_load1_end_op(struct acpi_walk_state * walk_state)
 		status = acpi_ds_scope_stack_pop(walk_state);
 	}
 
-	return (status);
+	return_ACPI_STATUS(status);
 }
 
 /*******************************************************************************
@@ -456,8 +502,8 @@ acpi_status acpi_ds_load1_end_op(struct acpi_walk_state * walk_state)
  ******************************************************************************/
 
 acpi_status
-acpi_ds_load2_begin_op(struct acpi_walk_state * walk_state,
-		       union acpi_parse_object ** out_op)
+acpi_ds_load2_begin_op(struct acpi_walk_state *walk_state,
+		       union acpi_parse_object **out_op)
 {
 	union acpi_parse_object *op;
 	struct acpi_namespace_node *node;
@@ -574,10 +620,10 @@ acpi_ds_load2_begin_op(struct acpi_walk_state * walk_state,
 			if (status == AE_NOT_FOUND) {
 				status = AE_OK;
 			} else {
-				ACPI_REPORT_NSERROR(buffer_ptr, status);
+				ACPI_ERROR_NAMESPACE(buffer_ptr, status);
 			}
 #else
-			ACPI_REPORT_NSERROR(buffer_ptr, status);
+			ACPI_ERROR_NAMESPACE(buffer_ptr, status);
 #endif
 			return_ACPI_STATUS(status);
 		}
@@ -607,7 +653,10 @@ acpi_ds_load2_begin_op(struct acpi_walk_state * walk_state,
 			 *  Scope (DEB) { ... }
 			 */
 
-			ACPI_REPORT_WARNING(("Type override - [%4.4s] had invalid type (%s) for Scope operator, changed to (Scope)\n", buffer_ptr, acpi_ut_get_type_name(node->type)));
+			ACPI_WARNING((AE_INFO,
+				      "Type override - [%4.4s] had invalid type (%s) for Scope operator, changed to (Scope)",
+				      buffer_ptr,
+				      acpi_ut_get_type_name(node->type)));
 
 			node->type = ACPI_TYPE_ANY;
 			walk_state->scope_info->common.value = ACPI_TYPE_ANY;
@@ -617,7 +666,10 @@ acpi_ds_load2_begin_op(struct acpi_walk_state * walk_state,
 
 			/* All other types are an error */
 
-			ACPI_REPORT_ERROR(("Invalid type (%s) for target of Scope operator [%4.4s]\n", acpi_ut_get_type_name(node->type), buffer_ptr));
+			ACPI_ERROR((AE_INFO,
+				    "Invalid type (%s) for target of Scope operator [%4.4s]",
+				    acpi_ut_get_type_name(node->type),
+				    buffer_ptr));
 
 			return (AE_AML_OPERAND_TYPE);
 		}
@@ -670,7 +722,7 @@ acpi_ds_load2_begin_op(struct acpi_walk_state * walk_state,
 	}
 
 	if (ACPI_FAILURE(status)) {
-		ACPI_REPORT_NSERROR(buffer_ptr, status);
+		ACPI_ERROR_NAMESPACE(buffer_ptr, status);
 		return_ACPI_STATUS(status);
 	}
 
@@ -840,6 +892,13 @@ acpi_status acpi_ds_load2_end_op(struct acpi_walk_state *walk_state)
 
 	case AML_TYPE_NAMED_FIELD:
 
+		/*
+		 * If we are executing a method, initialize the field
+		 */
+		if (walk_state->method_node) {
+			status = acpi_ds_init_field_objects(op, walk_state);
+		}
+
 		switch (op->common.aml_opcode) {
 		case AML_INDEX_FIELD_OP:
 
@@ -929,6 +988,24 @@ acpi_status acpi_ds_load2_end_op(struct acpi_walk_state *walk_state)
 		switch (op->common.aml_opcode) {
 #ifndef ACPI_NO_METHOD_EXECUTION
 		case AML_REGION_OP:
+
+			/*
+			 * If we are executing a method, initialize the region
+			 */
+			if (walk_state->method_node) {
+				status =
+				    acpi_ex_create_region(op->named.data,
+							  op->named.length,
+							  (acpi_adr_space_type)
+							  ((op->common.value.
+							    arg)->common.value.
+							   integer),
+							  walk_state);
+				if (ACPI_FAILURE(status)) {
+					return (status);
+				}
+			}
+
 			/*
 			 * The op_region is not fully parsed at this time. Only valid
 			 * argument is the space_id. (We must save the address of the
@@ -957,11 +1034,50 @@ acpi_status acpi_ds_load2_end_op(struct acpi_walk_state *walk_state)
 
 			status = acpi_ds_create_node(walk_state, node, op);
 			break;
+
+		case AML_METHOD_OP:
+			/*
+			 * method_op pkg_length name_string method_flags term_list
+			 *
+			 * Note: We must create the method node/object pair as soon as we
+			 * see the method declaration.  This allows later pass1 parsing
+			 * of invocations of the method (need to know the number of
+			 * arguments.)
+			 */
+			ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
+					  "LOADING-Method: State=%p Op=%p named_obj=%p\n",
+					  walk_state, op, op->named.node));
+
+			if (!acpi_ns_get_attached_object(op->named.node)) {
+				walk_state->operands[0] =
+				    ACPI_CAST_PTR(void, op->named.node);
+				walk_state->num_operands = 1;
+
+				status =
+				    acpi_ds_create_operands(walk_state,
+							    op->common.value.
+							    arg);
+				if (ACPI_SUCCESS(status)) {
+					status =
+					    acpi_ex_create_method(op->named.
+								  data,
+								  op->named.
+								  length,
+								  walk_state);
+				}
+				walk_state->operands[0] = NULL;
+				walk_state->num_operands = 0;
+
+				if (ACPI_FAILURE(status)) {
+					return_ACPI_STATUS(status);
+				}
+			}
+			break;
+
 #endif				/* ACPI_NO_METHOD_EXECUTION */
 
 		default:
 			/* All NAMED_COMPLEX opcodes must be handled above */
-			/* Note: Method objects were already created in Pass 1 */
 			break;
 		}
 		break;
@@ -1004,7 +1120,7 @@ acpi_status acpi_ds_load2_end_op(struct acpi_walk_state *walk_state)
 			 */
 			op->common.node = new_node;
 		} else {
-			ACPI_REPORT_NSERROR(arg->common.value.string, status);
+			ACPI_ERROR_NAMESPACE(arg->common.value.string, status);
 		}
 		break;
 

drivers/acpi/dispatcher/dswscope.c

@@ -5,7 +5,7 @@
  *****************************************************************************/
 
 /*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -107,14 +107,14 @@ acpi_ds_scope_stack_push(struct acpi_namespace_node *node,
 	if (!node) {
 		/* Invalid scope   */
 
-		ACPI_REPORT_ERROR(("ds_scope_stack_push: null scope passed\n"));
+		ACPI_ERROR((AE_INFO, "Null scope parameter"));
 		return_ACPI_STATUS(AE_BAD_PARAMETER);
 	}
 
 	/* Make sure object type is valid */
 
 	if (!acpi_ut_valid_object_type(type)) {
-		ACPI_REPORT_WARNING(("ds_scope_stack_push: Invalid object type: 0x%X\n", type));
+		ACPI_WARNING((AE_INFO, "Invalid object type: 0x%X", type));
 	}
 
 	/* Allocate a new scope object */

drivers/acpi/dispatcher/dswstate.c

@@ -5,7 +5,7 @@
  *****************************************************************************/
 
 /*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -92,26 +92,23 @@ acpi_ds_result_remove(union acpi_operand_object **object,
 
 	state = walk_state->results;
 	if (!state) {
-		ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-				  "No result object pushed! State=%p\n",
-				  walk_state));
+		ACPI_ERROR((AE_INFO, "No result object pushed! State=%p",
+			    walk_state));
 		return (AE_NOT_EXIST);
 	}
 
 	if (index >= ACPI_OBJ_MAX_OPERAND) {
-		ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-				  "Index out of range: %X State=%p Num=%X\n",
-				  index, walk_state,
-				  state->results.num_results));
+		ACPI_ERROR((AE_INFO,
+			    "Index out of range: %X State=%p Num=%X",
+			    index, walk_state, state->results.num_results));
 	}
 
 	/* Check for a valid result object */
 
 	if (!state->results.obj_desc[index]) {
-		ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-				  "Null operand! State=%p #Ops=%X, Index=%X\n",
-				  walk_state, state->results.num_results,
-				  index));
+		ACPI_ERROR((AE_INFO,
+			    "Null operand! State=%p #Ops=%X, Index=%X",
+			    walk_state, state->results.num_results, index));
 		return (AE_AML_NO_RETURN_VALUE);
 	}
 
@@ -163,9 +160,8 @@ acpi_ds_result_pop(union acpi_operand_object ** object,
 	}
 
 	if (!state->results.num_results) {
-		ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-				  "Result stack is empty! State=%p\n",
-				  walk_state));
+		ACPI_ERROR((AE_INFO, "Result stack is empty! State=%p",
+			    walk_state));
 		return (AE_AML_NO_RETURN_VALUE);
 	}
 
@@ -192,8 +188,7 @@ acpi_ds_result_pop(union acpi_operand_object ** object,
 		}
 	}
 
-	ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-			  "No result objects! State=%p\n", walk_state));
+	ACPI_ERROR((AE_INFO, "No result objects! State=%p", walk_state));
 	return (AE_AML_NO_RETURN_VALUE);
 }
 
@@ -222,15 +217,14 @@ acpi_ds_result_pop_from_bottom(union acpi_operand_object ** object,
 
 	state = walk_state->results;
 	if (!state) {
-		ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-				  "Warning: No result object pushed! State=%p\n",
-				  walk_state));
+		ACPI_ERROR((AE_INFO,
+			    "No result object pushed! State=%p", walk_state));
 		return (AE_NOT_EXIST);
 	}
 
 	if (!state->results.num_results) {
-		ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-				  "No result objects! State=%p\n", walk_state));
+		ACPI_ERROR((AE_INFO, "No result objects! State=%p",
+			    walk_state));
 		return (AE_AML_NO_RETURN_VALUE);
 	}
 
@@ -250,10 +244,10 @@ acpi_ds_result_pop_from_bottom(union acpi_operand_object ** object,
 	/* Check for a valid result object */
 
 	if (!*object) {
-		ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-				  "Null operand! State=%p #Ops=%X Index=%X\n",
-				  walk_state, state->results.num_results,
-				  (u32) index));
+		ACPI_ERROR((AE_INFO,
+			    "Null operand! State=%p #Ops=%X Index=%X",
+			    walk_state, state->results.num_results,
+			    (u32) index));
 		return (AE_AML_NO_RETURN_VALUE);
 	}
 
@@ -288,23 +282,21 @@ acpi_ds_result_push(union acpi_operand_object * object,
 
 	state = walk_state->results;
 	if (!state) {
-		ACPI_REPORT_ERROR(("No result stack frame during push\n"));
+		ACPI_ERROR((AE_INFO, "No result stack frame during push"));
 		return (AE_AML_INTERNAL);
 	}
 
 	if (state->results.num_results == ACPI_OBJ_NUM_OPERANDS) {
-		ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-				  "Result stack overflow: Obj=%p State=%p Num=%X\n",
-				  object, walk_state,
-				  state->results.num_results));
+		ACPI_ERROR((AE_INFO,
+			    "Result stack overflow: Obj=%p State=%p Num=%X",
+			    object, walk_state, state->results.num_results));
 		return (AE_STACK_OVERFLOW);
 	}
 
 	if (!object) {
-		ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-				  "Null Object! Obj=%p State=%p Num=%X\n",
-				  object, walk_state,
-				  state->results.num_results));
+		ACPI_ERROR((AE_INFO,
+			    "Null Object! Obj=%p State=%p Num=%X",
+			    object, walk_state, state->results.num_results));
 		return (AE_BAD_PARAMETER);
 	}
 
@@ -413,10 +405,9 @@ acpi_ds_obj_stack_push(void *object, struct acpi_walk_state * walk_state)
 	/* Check for stack overflow */
 
 	if (walk_state->num_operands >= ACPI_OBJ_NUM_OPERANDS) {
-		ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-				  "overflow! Obj=%p State=%p #Ops=%X\n",
-				  object, walk_state,
-				  walk_state->num_operands));
+		ACPI_ERROR((AE_INFO,
+			    "Object stack overflow! Obj=%p State=%p #Ops=%X",
+			    object, walk_state, walk_state->num_operands));
 		return (AE_STACK_OVERFLOW);
 	}
 
@@ -460,10 +451,10 @@ acpi_ds_obj_stack_pop(u32 pop_count, struct acpi_walk_state * walk_state)
 		/* Check for stack underflow */
 
 		if (walk_state->num_operands == 0) {
-			ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-					  "Underflow! Count=%X State=%p #Ops=%X\n",
-					  pop_count, walk_state,
-					  walk_state->num_operands));
+			ACPI_ERROR((AE_INFO,
+				    "Object stack underflow! Count=%X State=%p #Ops=%X",
+				    pop_count, walk_state,
+				    walk_state->num_operands));
 			return (AE_STACK_UNDERFLOW);
 		}
 
@@ -506,10 +497,10 @@ acpi_ds_obj_stack_pop_and_delete(u32 pop_count,
 		/* Check for stack underflow */
 
 		if (walk_state->num_operands == 0) {
-			ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-					  "Underflow! Count=%X State=%p #Ops=%X\n",
-					  pop_count, walk_state,
-					  walk_state->num_operands));
+			ACPI_ERROR((AE_INFO,
+				    "Object stack underflow! Count=%X State=%p #Ops=%X",
+				    pop_count, walk_state,
+				    walk_state->num_operands));
 			return (AE_STACK_UNDERFLOW);
 		}
 
@@ -826,16 +817,14 @@ void acpi_ds_delete_walk_state(struct acpi_walk_state *walk_state)
 	}
 
 	if (walk_state->data_type != ACPI_DESC_TYPE_WALK) {
-		ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-				  "%p is not a valid walk state\n",
-				  walk_state));
+		ACPI_ERROR((AE_INFO, "%p is not a valid walk state",
+			    walk_state));
 		return;
 	}
 
 	if (walk_state->parser_state.scope) {
-		ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-				  "%p walk still has a scope list\n",
-				  walk_state));
+		ACPI_ERROR((AE_INFO, "%p walk still has a scope list",
+			    walk_state));
 	}
 
 	/* Always must free any linked control states */
@@ -894,25 +883,24 @@ acpi_ds_result_insert(void *object,
 
 	state = walk_state->results;
 	if (!state) {
-		ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-				  "No result object pushed! State=%p\n",
-				  walk_state));
+		ACPI_ERROR((AE_INFO, "No result object pushed! State=%p",
+			    walk_state));
 		return (AE_NOT_EXIST);
 	}
 
 	if (index >= ACPI_OBJ_NUM_OPERANDS) {
-		ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-				  "Index out of range: %X Obj=%p State=%p Num=%X\n",
-				  index, object, walk_state,
-				  state->results.num_results));
+		ACPI_ERROR((AE_INFO,
+			    "Index out of range: %X Obj=%p State=%p Num=%X",
+			    index, object, walk_state,
+			    state->results.num_results));
 		return (AE_BAD_PARAMETER);
 	}
 
 	if (!object) {
-		ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-				  "Null Object! Index=%X Obj=%p State=%p Num=%X\n",
-				  index, object, walk_state,
-				  state->results.num_results));
+		ACPI_ERROR((AE_INFO,
+			    "Null Object! Index=%X Obj=%p State=%p Num=%X",
+			    index, object, walk_state,
+			    state->results.num_results));
 		return (AE_BAD_PARAMETER);
 	}
 
@@ -986,9 +974,9 @@ acpi_ds_obj_stack_pop_object(union acpi_operand_object **object,
 	/* Check for stack underflow */
 
 	if (walk_state->num_operands == 0) {
-		ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-				  "Missing operand/stack empty! State=%p #Ops=%X\n",
-				  walk_state, walk_state->num_operands));
+		ACPI_ERROR((AE_INFO,
+			    "Missing operand/stack empty! State=%p #Ops=%X",
+			    walk_state, walk_state->num_operands));
 		*object = NULL;
 		return (AE_AML_NO_OPERAND);
 	}
@@ -1000,9 +988,9 @@ acpi_ds_obj_stack_pop_object(union acpi_operand_object **object,
 	/* Check for a valid operand */
 
 	if (!walk_state->operands[walk_state->num_operands]) {
-		ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-				  "Null operand! State=%p #Ops=%X\n",
-				  walk_state, walk_state->num_operands));
+		ACPI_ERROR((AE_INFO,
+			    "Null operand! State=%p #Ops=%X",
+			    walk_state, walk_state->num_operands));
 		*object = NULL;
 		return (AE_AML_NO_OPERAND);
 	}

drivers/acpi/ec.c

@@ -60,20 +60,20 @@ ACPI_MODULE_NAME("acpi_ec")
 #define ACPI_EC_BURST_ENABLE	0x82
 #define ACPI_EC_BURST_DISABLE	0x83
 #define ACPI_EC_COMMAND_QUERY	0x84
-#define EC_POLLING		0xFF
-#define EC_BURST		0x00
+#define EC_POLL			0xFF
+#define EC_INTR			0x00
 static int acpi_ec_remove(struct acpi_device *device, int type);
 static int acpi_ec_start(struct acpi_device *device);
 static int acpi_ec_stop(struct acpi_device *device, int type);
-static int acpi_ec_burst_add(struct acpi_device *device);
-static int acpi_ec_polling_add(struct acpi_device *device);
+static int acpi_ec_intr_add(struct acpi_device *device);
+static int acpi_ec_poll_add(struct acpi_device *device);
 
 static struct acpi_driver acpi_ec_driver = {
 	.name = ACPI_EC_DRIVER_NAME,
 	.class = ACPI_EC_CLASS,
 	.ids = ACPI_EC_HID,
 	.ops = {
-		.add = acpi_ec_polling_add,
+		.add = acpi_ec_intr_add,
 		.remove = acpi_ec_remove,
 		.start = acpi_ec_start,
 		.stop = acpi_ec_stop,
@@ -105,7 +105,7 @@ union acpi_ec {
 		atomic_t pending_gpe;
 		struct semaphore sem;
 		wait_queue_head_t wait;
-	} burst;
+	} intr;
 
 	struct {
 		u32 mode;
@@ -117,37 +117,37 @@ union acpi_ec {
 		struct acpi_generic_address data_addr;
 		unsigned long global_lock;
 		spinlock_t lock;
-	} polling;
+	} poll;
 };
 
-static int acpi_ec_polling_wait(union acpi_ec *ec, u8 event);
-static int acpi_ec_burst_wait(union acpi_ec *ec, unsigned int event);
-static int acpi_ec_polling_read(union acpi_ec *ec, u8 address, u32 * data);
-static int acpi_ec_burst_read(union acpi_ec *ec, u8 address, u32 * data);
-static int acpi_ec_polling_write(union acpi_ec *ec, u8 address, u8 data);
-static int acpi_ec_burst_write(union acpi_ec *ec, u8 address, u8 data);
-static int acpi_ec_polling_query(union acpi_ec *ec, u32 * data);
-static int acpi_ec_burst_query(union acpi_ec *ec, u32 * data);
-static void acpi_ec_gpe_polling_query(void *ec_cxt);
-static void acpi_ec_gpe_burst_query(void *ec_cxt);
-static u32 acpi_ec_gpe_polling_handler(void *data);
-static u32 acpi_ec_gpe_burst_handler(void *data);
+static int acpi_ec_poll_wait(union acpi_ec *ec, u8 event);
+static int acpi_ec_intr_wait(union acpi_ec *ec, unsigned int event);
+static int acpi_ec_poll_read(union acpi_ec *ec, u8 address, u32 * data);
+static int acpi_ec_intr_read(union acpi_ec *ec, u8 address, u32 * data);
+static int acpi_ec_poll_write(union acpi_ec *ec, u8 address, u8 data);
+static int acpi_ec_intr_write(union acpi_ec *ec, u8 address, u8 data);
+static int acpi_ec_poll_query(union acpi_ec *ec, u32 * data);
+static int acpi_ec_intr_query(union acpi_ec *ec, u32 * data);
+static void acpi_ec_gpe_poll_query(void *ec_cxt);
+static void acpi_ec_gpe_intr_query(void *ec_cxt);
+static u32 acpi_ec_gpe_poll_handler(void *data);
+static u32 acpi_ec_gpe_intr_handler(void *data);
 static acpi_status __init
-acpi_fake_ecdt_polling_callback(acpi_handle handle,
+acpi_fake_ecdt_poll_callback(acpi_handle handle,
 				u32 Level, void *context, void **retval);
 
 static acpi_status __init
-acpi_fake_ecdt_burst_callback(acpi_handle handle,
+acpi_fake_ecdt_intr_callback(acpi_handle handle,
 			      u32 Level, void *context, void **retval);
 
-static int __init acpi_ec_polling_get_real_ecdt(void);
-static int __init acpi_ec_burst_get_real_ecdt(void);
+static int __init acpi_ec_poll_get_real_ecdt(void);
+static int __init acpi_ec_intr_get_real_ecdt(void);
 /* If we find an EC via the ECDT, we need to keep a ptr to its context */
 static union acpi_ec *ec_ecdt;
 
 /* External interfaces use first EC only, so remember */
 static struct acpi_device *first_ec;
-static int acpi_ec_polling_mode = EC_POLLING;
+static int acpi_ec_poll_mode = EC_INTR;
 
 /* --------------------------------------------------------------------------
                              Transaction Management
@@ -163,13 +163,13 @@ static u32 acpi_ec_read_status(union acpi_ec *ec)
 
 static int acpi_ec_wait(union acpi_ec *ec, u8 event)
 {
-	if (acpi_ec_polling_mode)
-		return acpi_ec_polling_wait(ec, event);
+	if (acpi_ec_poll_mode)
+		return acpi_ec_poll_wait(ec, event);
 	else
-		return acpi_ec_burst_wait(ec, event);
+		return acpi_ec_intr_wait(ec, event);
 }
 
-static int acpi_ec_polling_wait(union acpi_ec *ec, u8 event)
+static int acpi_ec_poll_wait(union acpi_ec *ec, u8 event)
 {
 	u32 acpi_ec_status = 0;
 	u32 i = ACPI_EC_UDELAY_COUNT;
@@ -203,36 +203,31 @@ static int acpi_ec_polling_wait(union acpi_ec *ec, u8 event)
 
 	return -ETIME;
 }
-static int acpi_ec_burst_wait(union acpi_ec *ec, unsigned int event)
+static int acpi_ec_intr_wait(union acpi_ec *ec, unsigned int event)
 {
 	int result = 0;
 
 	ACPI_FUNCTION_TRACE("acpi_ec_wait");
 
-	ec->burst.expect_event = event;
+	ec->intr.expect_event = event;
 	smp_mb();
 
 	switch (event) {
-	case ACPI_EC_EVENT_OBF:
-		if (acpi_ec_read_status(ec) & event) {
-			ec->burst.expect_event = 0;
-			return_VALUE(0);
-		}
-		break;
-
 	case ACPI_EC_EVENT_IBE:
 		if (~acpi_ec_read_status(ec) & event) {
-			ec->burst.expect_event = 0;
+			ec->intr.expect_event = 0;
 			return_VALUE(0);
 		}
 		break;
+	default:
+		break;
 	}
 
-	result = wait_event_timeout(ec->burst.wait,
-				    !ec->burst.expect_event,
+	result = wait_event_timeout(ec->intr.wait,
+				    !ec->intr.expect_event,
 				    msecs_to_jiffies(ACPI_EC_DELAY));
 
-	ec->burst.expect_event = 0;
+	ec->intr.expect_event = 0;
 	smp_mb();
 
 	/*
@@ -255,7 +250,12 @@ static int acpi_ec_burst_wait(union acpi_ec *ec, unsigned int event)
 	return_VALUE(-ETIME);
 }
 
-static int acpi_ec_enter_burst_mode(union acpi_ec *ec)
+#ifdef ACPI_FUTURE_USAGE
+/*
+ * Note: samsung nv5000 doesn't work with ec burst mode.
+ * http://bugzilla.kernel.org/show_bug.cgi?id=4980
+ */
+int acpi_ec_enter_burst_mode(union acpi_ec *ec)
 {
 	u32 tmp = 0;
 	int status = 0;
@@ -270,45 +270,56 @@ static int acpi_ec_enter_burst_mode(union acpi_ec *ec)
 		acpi_hw_low_level_write(8, ACPI_EC_BURST_ENABLE,
 					&ec->common.command_addr);
 		status = acpi_ec_wait(ec, ACPI_EC_EVENT_OBF);
-		if (status)
-			return_VALUE(-EINVAL);
 		acpi_hw_low_level_read(8, &tmp, &ec->common.data_addr);
 		if (tmp != 0x90) {	/* Burst ACK byte */
 			return_VALUE(-EINVAL);
 		}
 	}
 
-	atomic_set(&ec->burst.leaving_burst, 0);
+	atomic_set(&ec->intr.leaving_burst, 0);
 	return_VALUE(0);
       end:
-	printk("Error in acpi_ec_wait\n");
+	printk(KERN_WARNING PREFIX "Error in acpi_ec_wait\n");
 	return_VALUE(-1);
 }
 
-static int acpi_ec_leave_burst_mode(union acpi_ec *ec)
+int acpi_ec_leave_burst_mode(union acpi_ec *ec)
 {
+	int status = 0;
 
 	ACPI_FUNCTION_TRACE("acpi_ec_leave_burst_mode");
 
-	atomic_set(&ec->burst.leaving_burst, 1);
+	status = acpi_ec_read_status(ec);
+	if (status != -EINVAL && (status & ACPI_EC_FLAG_BURST)){
+		status = acpi_ec_wait(ec, ACPI_EC_FLAG_IBF);
+		if(status)
+			goto end;
+		acpi_hw_low_level_write(8, ACPI_EC_BURST_DISABLE, &ec->common.command_addr);
+		acpi_ec_wait(ec, ACPI_EC_FLAG_IBF);
+	} 
+	atomic_set(&ec->intr.leaving_burst, 1);
 	return_VALUE(0);
+end:
+	printk(KERN_WARNING PREFIX "leave burst_mode:error\n");
+	return_VALUE(-1);
 }
+#endif /* ACPI_FUTURE_USAGE */
 
 static int acpi_ec_read(union acpi_ec *ec, u8 address, u32 * data)
 {
-	if (acpi_ec_polling_mode)
-		return acpi_ec_polling_read(ec, address, data);
+	if (acpi_ec_poll_mode)
+		return acpi_ec_poll_read(ec, address, data);
 	else
-		return acpi_ec_burst_read(ec, address, data);
+		return acpi_ec_intr_read(ec, address, data);
 }
 static int acpi_ec_write(union acpi_ec *ec, u8 address, u8 data)
 {
-	if (acpi_ec_polling_mode)
-		return acpi_ec_polling_write(ec, address, data);
+	if (acpi_ec_poll_mode)
+		return acpi_ec_poll_write(ec, address, data);
 	else
-		return acpi_ec_burst_write(ec, address, data);
+		return acpi_ec_intr_write(ec, address, data);
 }
-static int acpi_ec_polling_read(union acpi_ec *ec, u8 address, u32 * data)
+static int acpi_ec_poll_read(union acpi_ec *ec, u8 address, u32 * data)
 {
 	acpi_status status = AE_OK;
 	int result = 0;
@@ -328,7 +339,7 @@ static int acpi_ec_polling_read(union acpi_ec *ec, u8 address, u32 * data)
 			return_VALUE(-ENODEV);
 	}
 
-	spin_lock_irqsave(&ec->polling.lock, flags);
+	spin_lock_irqsave(&ec->poll.lock, flags);
 
 	acpi_hw_low_level_write(8, ACPI_EC_COMMAND_READ,
 				&ec->common.command_addr);
@@ -347,7 +358,7 @@ static int acpi_ec_polling_read(union acpi_ec *ec, u8 address, u32 * data)
 			  *data, address));
 
       end:
-	spin_unlock_irqrestore(&ec->polling.lock, flags);
+	spin_unlock_irqrestore(&ec->poll.lock, flags);
 
 	if (ec->common.global_lock)
 		acpi_release_global_lock(glk);
@@ -355,7 +366,7 @@ static int acpi_ec_polling_read(union acpi_ec *ec, u8 address, u32 * data)
 	return_VALUE(result);
 }
 
-static int acpi_ec_polling_write(union acpi_ec *ec, u8 address, u8 data)
+static int acpi_ec_poll_write(union acpi_ec *ec, u8 address, u8 data)
 {
 	int result = 0;
 	acpi_status status = AE_OK;
@@ -373,7 +384,7 @@ static int acpi_ec_polling_write(union acpi_ec *ec, u8 address, u8 data)
 			return_VALUE(-ENODEV);
 	}
 
-	spin_lock_irqsave(&ec->polling.lock, flags);
+	spin_lock_irqsave(&ec->poll.lock, flags);
 
 	acpi_hw_low_level_write(8, ACPI_EC_COMMAND_WRITE,
 				&ec->common.command_addr);
@@ -395,7 +406,7 @@ static int acpi_ec_polling_write(union acpi_ec *ec, u8 address, u8 data)
 			  data, address));
 
       end:
-	spin_unlock_irqrestore(&ec->polling.lock, flags);
+	spin_unlock_irqrestore(&ec->poll.lock, flags);
 
 	if (ec->common.global_lock)
 		acpi_release_global_lock(glk);
@@ -403,7 +414,7 @@ static int acpi_ec_polling_write(union acpi_ec *ec, u8 address, u8 data)
 	return_VALUE(result);
 }
 
-static int acpi_ec_burst_read(union acpi_ec *ec, u8 address, u32 * data)
+static int acpi_ec_intr_read(union acpi_ec *ec, u8 address, u32 * data)
 {
 	int status = 0;
 	u32 glk;
@@ -422,25 +433,24 @@ static int acpi_ec_burst_read(union acpi_ec *ec, u8 address, u32 * data)
 	}
 
 	WARN_ON(in_interrupt());
-	down(&ec->burst.sem);
+	down(&ec->intr.sem);
 
-	acpi_ec_enter_burst_mode(ec);
 	status = acpi_ec_wait(ec, ACPI_EC_EVENT_IBE);
 	if (status) {
-		printk("read EC, IB not empty\n");
+		printk(KERN_DEBUG PREFIX "read EC, IB not empty\n");
 		goto end;
 	}
 	acpi_hw_low_level_write(8, ACPI_EC_COMMAND_READ,
 				&ec->common.command_addr);
 	status = acpi_ec_wait(ec, ACPI_EC_EVENT_IBE);
 	if (status) {
-		printk("read EC, IB not empty\n");
+		printk(KERN_DEBUG PREFIX "read EC, IB not empty\n");
 	}
 
 	acpi_hw_low_level_write(8, address, &ec->common.data_addr);
 	status = acpi_ec_wait(ec, ACPI_EC_EVENT_OBF);
 	if (status) {
-		printk("read EC, OB not full\n");
+		printk(KERN_DEBUG PREFIX "read EC, OB not full\n");
 		goto end;
 	}
 	acpi_hw_low_level_read(8, data, &ec->common.data_addr);
@@ -448,8 +458,7 @@ static int acpi_ec_burst_read(union acpi_ec *ec, u8 address, u32 * data)
 			  *data, address));
 
       end:
-	acpi_ec_leave_burst_mode(ec);
-	up(&ec->burst.sem);
+	up(&ec->intr.sem);
 
 	if (ec->common.global_lock)
 		acpi_release_global_lock(glk);
@@ -457,7 +466,7 @@ static int acpi_ec_burst_read(union acpi_ec *ec, u8 address, u32 * data)
 	return_VALUE(status);
 }
 
-static int acpi_ec_burst_write(union acpi_ec *ec, u8 address, u8 data)
+static int acpi_ec_intr_write(union acpi_ec *ec, u8 address, u8 data)
 {
 	int status = 0;
 	u32 glk;
@@ -474,25 +483,23 @@ static int acpi_ec_burst_write(union acpi_ec *ec, u8 address, u8 data)
 	}
 
 	WARN_ON(in_interrupt());
-	down(&ec->burst.sem);
-
-	acpi_ec_enter_burst_mode(ec);
+	down(&ec->intr.sem);
 
 	status = acpi_ec_wait(ec, ACPI_EC_EVENT_IBE);
 	if (status) {
-		printk("write EC, IB not empty\n");
+		printk(KERN_DEBUG PREFIX "write EC, IB not empty\n");
 	}
 	acpi_hw_low_level_write(8, ACPI_EC_COMMAND_WRITE,
 				&ec->common.command_addr);
 	status = acpi_ec_wait(ec, ACPI_EC_EVENT_IBE);
 	if (status) {
-		printk("write EC, IB not empty\n");
+		printk(KERN_DEBUG PREFIX "write EC, IB not empty\n");
 	}
 
 	acpi_hw_low_level_write(8, address, &ec->common.data_addr);
 	status = acpi_ec_wait(ec, ACPI_EC_EVENT_IBE);
 	if (status) {
-		printk("write EC, IB not empty\n");
+		printk(KERN_DEBUG PREFIX "write EC, IB not empty\n");
 	}
 
 	acpi_hw_low_level_write(8, data, &ec->common.data_addr);
@@ -500,8 +507,7 @@ static int acpi_ec_burst_write(union acpi_ec *ec, u8 address, u8 data)
 	ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Wrote [%02x] to address [%02x]\n",
 			  data, address));
 
-	acpi_ec_leave_burst_mode(ec);
-	up(&ec->burst.sem);
+	up(&ec->intr.sem);
 
 	if (ec->common.global_lock)
 		acpi_release_global_lock(glk);
@@ -553,12 +559,12 @@ EXPORT_SYMBOL(ec_write);
 
 static int acpi_ec_query(union acpi_ec *ec, u32 * data)
 {
-	if (acpi_ec_polling_mode)
-		return acpi_ec_polling_query(ec, data);
+	if (acpi_ec_poll_mode)
+		return acpi_ec_poll_query(ec, data);
 	else
-		return acpi_ec_burst_query(ec, data);
+		return acpi_ec_intr_query(ec, data);
 }
-static int acpi_ec_polling_query(union acpi_ec *ec, u32 * data)
+static int acpi_ec_poll_query(union acpi_ec *ec, u32 * data)
 {
 	int result = 0;
 	acpi_status status = AE_OK;
@@ -583,7 +589,7 @@ static int acpi_ec_polling_query(union acpi_ec *ec, u32 * data)
 	 * Note that successful completion of the query causes the ACPI_EC_SCI
 	 * bit to be cleared (and thus clearing the interrupt source).
 	 */
-	spin_lock_irqsave(&ec->polling.lock, flags);
+	spin_lock_irqsave(&ec->poll.lock, flags);
 
 	acpi_hw_low_level_write(8, ACPI_EC_COMMAND_QUERY,
 				&ec->common.command_addr);
@@ -596,14 +602,14 @@ static int acpi_ec_polling_query(union acpi_ec *ec, u32 * data)
 		result = -ENODATA;
 
       end:
-	spin_unlock_irqrestore(&ec->polling.lock, flags);
+	spin_unlock_irqrestore(&ec->poll.lock, flags);
 
 	if (ec->common.global_lock)
 		acpi_release_global_lock(glk);
 
 	return_VALUE(result);
 }
-static int acpi_ec_burst_query(union acpi_ec *ec, u32 * data)
+static int acpi_ec_intr_query(union acpi_ec *ec, u32 * data)
 {
 	int status = 0;
 	u32 glk;
@@ -620,11 +626,11 @@ static int acpi_ec_burst_query(union acpi_ec *ec, u32 * data)
 			return_VALUE(-ENODEV);
 	}
 
-	down(&ec->burst.sem);
+	down(&ec->intr.sem);
 
 	status = acpi_ec_wait(ec, ACPI_EC_EVENT_IBE);
 	if (status) {
-		printk("query EC, IB not empty\n");
+		printk(KERN_DEBUG PREFIX "query EC, IB not empty\n");
 		goto end;
 	}
 	/*
@@ -636,7 +642,7 @@ static int acpi_ec_burst_query(union acpi_ec *ec, u32 * data)
 				&ec->common.command_addr);
 	status = acpi_ec_wait(ec, ACPI_EC_EVENT_OBF);
 	if (status) {
-		printk("query EC, OB not full\n");
+		printk(KERN_DEBUG PREFIX "query EC, OB not full\n");
 		goto end;
 	}
 
@@ -645,7 +651,7 @@ static int acpi_ec_burst_query(union acpi_ec *ec, u32 * data)
 		status = -ENODATA;
 
       end:
-	up(&ec->burst.sem);
+	up(&ec->intr.sem);
 
 	if (ec->common.global_lock)
 		acpi_release_global_lock(glk);
@@ -664,13 +670,13 @@ union acpi_ec_query_data {
 
 static void acpi_ec_gpe_query(void *ec_cxt)
 {
-	if (acpi_ec_polling_mode)
-		acpi_ec_gpe_polling_query(ec_cxt);
+	if (acpi_ec_poll_mode)
+		acpi_ec_gpe_poll_query(ec_cxt);
 	else
-		acpi_ec_gpe_burst_query(ec_cxt);
+		acpi_ec_gpe_intr_query(ec_cxt);
 }
 
-static void acpi_ec_gpe_polling_query(void *ec_cxt)
+static void acpi_ec_gpe_poll_query(void *ec_cxt)
 {
 	union acpi_ec *ec = (union acpi_ec *)ec_cxt;
 	u32 value = 0;
@@ -685,9 +691,9 @@ static void acpi_ec_gpe_polling_query(void *ec_cxt)
 	if (!ec_cxt)
 		goto end;
 
-	spin_lock_irqsave(&ec->polling.lock, flags);
+	spin_lock_irqsave(&ec->poll.lock, flags);
 	acpi_hw_low_level_read(8, &value, &ec->common.command_addr);
-	spin_unlock_irqrestore(&ec->polling.lock, flags);
+	spin_unlock_irqrestore(&ec->poll.lock, flags);
 
 	/* TBD: Implement asynch events!
 	 * NOTE: All we care about are EC-SCI's.  Other EC events are
@@ -711,7 +717,7 @@ static void acpi_ec_gpe_polling_query(void *ec_cxt)
       end:
 	acpi_enable_gpe(NULL, ec->common.gpe_bit, ACPI_NOT_ISR);
 }
-static void acpi_ec_gpe_burst_query(void *ec_cxt)
+static void acpi_ec_gpe_intr_query(void *ec_cxt)
 {
 	union acpi_ec *ec = (union acpi_ec *)ec_cxt;
 	u32 value;
@@ -736,18 +742,18 @@ static void acpi_ec_gpe_burst_query(void *ec_cxt)
 
 	acpi_evaluate_object(ec->common.handle, object_name, NULL, NULL);
       end:
-	atomic_dec(&ec->burst.pending_gpe);
+	atomic_dec(&ec->intr.pending_gpe);
 	return;
 }
 
 static u32 acpi_ec_gpe_handler(void *data)
 {
-	if (acpi_ec_polling_mode)
-		return acpi_ec_gpe_polling_handler(data);
+	if (acpi_ec_poll_mode)
+		return acpi_ec_gpe_poll_handler(data);
 	else
-		return acpi_ec_gpe_burst_handler(data);
+		return acpi_ec_gpe_intr_handler(data);
 }
-static u32 acpi_ec_gpe_polling_handler(void *data)
+static u32 acpi_ec_gpe_poll_handler(void *data)
 {
 	acpi_status status = AE_OK;
 	union acpi_ec *ec = (union acpi_ec *)data;
@@ -765,7 +771,7 @@ static u32 acpi_ec_gpe_polling_handler(void *data)
 	else
 		return ACPI_INTERRUPT_NOT_HANDLED;
 }
-static u32 acpi_ec_gpe_burst_handler(void *data)
+static u32 acpi_ec_gpe_intr_handler(void *data)
 {
 	acpi_status status = AE_OK;
 	u32 value;
@@ -777,22 +783,22 @@ static u32 acpi_ec_gpe_burst_handler(void *data)
 	acpi_clear_gpe(NULL, ec->common.gpe_bit, ACPI_ISR);
 	value = acpi_ec_read_status(ec);
 
-	switch (ec->burst.expect_event) {
+	switch (ec->intr.expect_event) {
 	case ACPI_EC_EVENT_OBF:
 		if (!(value & ACPI_EC_FLAG_OBF))
 			break;
 	case ACPI_EC_EVENT_IBE:
 		if ((value & ACPI_EC_FLAG_IBF))
 			break;
-		ec->burst.expect_event = 0;
-		wake_up(&ec->burst.wait);
+		ec->intr.expect_event = 0;
+		wake_up(&ec->intr.wait);
 		return ACPI_INTERRUPT_HANDLED;
 	default:
 		break;
 	}
 
 	if (value & ACPI_EC_FLAG_SCI) {
-		atomic_add(1, &ec->burst.pending_gpe);
+		atomic_add(1, &ec->intr.pending_gpe);
 		status = acpi_os_queue_for_execution(OSD_PRIORITY_GPE,
 						     acpi_ec_gpe_query, ec);
 		return status == AE_OK ?
@@ -980,7 +986,7 @@ static int acpi_ec_remove_fs(struct acpi_device *device)
                                Driver Interface
    -------------------------------------------------------------------------- */
 
-static int acpi_ec_polling_add(struct acpi_device *device)
+static int acpi_ec_poll_add(struct acpi_device *device)
 {
 	int result = 0;
 	acpi_status status = AE_OK;
@@ -999,7 +1005,7 @@ static int acpi_ec_polling_add(struct acpi_device *device)
 
 	ec->common.handle = device->handle;
 	ec->common.uid = -1;
-	spin_lock_init(&ec->polling.lock);
+	spin_lock_init(&ec->poll.lock);
 	strcpy(acpi_device_name(device), ACPI_EC_DEVICE_NAME);
 	strcpy(acpi_device_class(device), ACPI_EC_CLASS);
 	acpi_driver_data(device) = ec;
@@ -1038,7 +1044,7 @@ static int acpi_ec_polling_add(struct acpi_device *device)
 	if (result)
 		goto end;
 
-	printk(KERN_INFO PREFIX "%s [%s] (gpe %d)\n",
+	printk(KERN_INFO PREFIX "%s [%s] (gpe %d) polling mode.\n",
 	       acpi_device_name(device), acpi_device_bid(device),
 	       (u32) ec->common.gpe_bit);
 
@@ -1051,7 +1057,7 @@ static int acpi_ec_polling_add(struct acpi_device *device)
 
 	return_VALUE(result);
 }
-static int acpi_ec_burst_add(struct acpi_device *device)
+static int acpi_ec_intr_add(struct acpi_device *device)
 {
 	int result = 0;
 	acpi_status status = AE_OK;
@@ -1070,10 +1076,10 @@ static int acpi_ec_burst_add(struct acpi_device *device)
 
 	ec->common.handle = device->handle;
 	ec->common.uid = -1;
-	atomic_set(&ec->burst.pending_gpe, 0);
-	atomic_set(&ec->burst.leaving_burst, 1);
-	init_MUTEX(&ec->burst.sem);
-	init_waitqueue_head(&ec->burst.wait);
+	atomic_set(&ec->intr.pending_gpe, 0);
+	atomic_set(&ec->intr.leaving_burst, 1);
+	init_MUTEX(&ec->intr.sem);
+	init_waitqueue_head(&ec->intr.wait);
 	strcpy(acpi_device_name(device), ACPI_EC_DEVICE_NAME);
 	strcpy(acpi_device_class(device), ACPI_EC_CLASS);
 	acpi_driver_data(device) = ec;
@@ -1112,8 +1118,7 @@ static int acpi_ec_burst_add(struct acpi_device *device)
 	if (result)
 		goto end;
 
-	printk("burst-mode-ec-10-Aug\n");
-	printk(KERN_INFO PREFIX "%s [%s] (gpe %d)\n",
+	printk(KERN_INFO PREFIX "%s [%s] (gpe %d) interrupt mode.\n",
 	       acpi_device_name(device), acpi_device_bid(device),
 	       (u32) ec->common.gpe_bit);
 
@@ -1151,7 +1156,7 @@ acpi_ec_io_ports(struct acpi_resource *resource, void *context)
 	union acpi_ec *ec = (union acpi_ec *)context;
 	struct acpi_generic_address *addr;
 
-	if (resource->id != ACPI_RSTYPE_IO) {
+	if (resource->type != ACPI_RESOURCE_TYPE_IO) {
 		return AE_OK;
 	}
 
@@ -1171,7 +1176,7 @@ acpi_ec_io_ports(struct acpi_resource *resource, void *context)
 	addr->address_space_id = ACPI_ADR_SPACE_SYSTEM_IO;
 	addr->register_bit_width = 8;
 	addr->register_bit_offset = 0;
-	addr->address = resource->data.io.min_base_address;
+	addr->address = resource->data.io.minimum;
 
 	return AE_OK;
 }
@@ -1267,16 +1272,16 @@ acpi_fake_ecdt_callback(acpi_handle handle,
 			u32 Level, void *context, void **retval)
 {
 
-	if (acpi_ec_polling_mode)
-		return acpi_fake_ecdt_polling_callback(handle,
+	if (acpi_ec_poll_mode)
+		return acpi_fake_ecdt_poll_callback(handle,
 						       Level, context, retval);
 	else
-		return acpi_fake_ecdt_burst_callback(handle,
+		return acpi_fake_ecdt_intr_callback(handle,
 						     Level, context, retval);
 }
 
 static acpi_status __init
-acpi_fake_ecdt_polling_callback(acpi_handle handle,
+acpi_fake_ecdt_poll_callback(acpi_handle handle,
 				u32 Level, void *context, void **retval)
 {
 	acpi_status status;
@@ -1295,7 +1300,7 @@ acpi_fake_ecdt_polling_callback(acpi_handle handle,
 				  &ec_ecdt->common.gpe_bit);
 	if (ACPI_FAILURE(status))
 		return status;
-	spin_lock_init(&ec_ecdt->polling.lock);
+	spin_lock_init(&ec_ecdt->poll.lock);
 	ec_ecdt->common.global_lock = TRUE;
 	ec_ecdt->common.handle = handle;
 
@@ -1308,13 +1313,13 @@ acpi_fake_ecdt_polling_callback(acpi_handle handle,
 }
 
 static acpi_status __init
-acpi_fake_ecdt_burst_callback(acpi_handle handle,
+acpi_fake_ecdt_intr_callback(acpi_handle handle,
 			      u32 Level, void *context, void **retval)
 {
 	acpi_status status;
 
-	init_MUTEX(&ec_ecdt->burst.sem);
-	init_waitqueue_head(&ec_ecdt->burst.wait);
+	init_MUTEX(&ec_ecdt->intr.sem);
+	init_waitqueue_head(&ec_ecdt->intr.wait);
 	status = acpi_walk_resources(handle, METHOD_NAME__CRS,
 				     acpi_ec_io_ports, ec_ecdt);
 	if (ACPI_FAILURE(status))
@@ -1380,13 +1385,13 @@ static int __init acpi_ec_fake_ecdt(void)
 
 static int __init acpi_ec_get_real_ecdt(void)
 {
-	if (acpi_ec_polling_mode)
-		return acpi_ec_polling_get_real_ecdt();
+	if (acpi_ec_poll_mode)
+		return acpi_ec_poll_get_real_ecdt();
 	else
-		return acpi_ec_burst_get_real_ecdt();
+		return acpi_ec_intr_get_real_ecdt();
 }
 
-static int __init acpi_ec_polling_get_real_ecdt(void)
+static int __init acpi_ec_poll_get_real_ecdt(void)
 {
 	acpi_status status;
 	struct acpi_table_ecdt *ecdt_ptr;
@@ -1411,7 +1416,7 @@ static int __init acpi_ec_polling_get_real_ecdt(void)
 	ec_ecdt->common.status_addr = ecdt_ptr->ec_control;
 	ec_ecdt->common.data_addr = ecdt_ptr->ec_data;
 	ec_ecdt->common.gpe_bit = ecdt_ptr->gpe_bit;
-	spin_lock_init(&ec_ecdt->polling.lock);
+	spin_lock_init(&ec_ecdt->poll.lock);
 	/* use the GL just to be safe */
 	ec_ecdt->common.global_lock = TRUE;
 	ec_ecdt->common.uid = ecdt_ptr->uid;
@@ -1431,7 +1436,7 @@ static int __init acpi_ec_polling_get_real_ecdt(void)
 	return -ENODEV;
 }
 
-static int __init acpi_ec_burst_get_real_ecdt(void)
+static int __init acpi_ec_intr_get_real_ecdt(void)
 {
 	acpi_status status;
 	struct acpi_table_ecdt *ecdt_ptr;
@@ -1452,8 +1457,8 @@ static int __init acpi_ec_burst_get_real_ecdt(void)
 		return -ENOMEM;
 	memset(ec_ecdt, 0, sizeof(union acpi_ec));
 
-	init_MUTEX(&ec_ecdt->burst.sem);
-	init_waitqueue_head(&ec_ecdt->burst.wait);
+	init_MUTEX(&ec_ecdt->intr.sem);
+	init_waitqueue_head(&ec_ecdt->intr.wait);
 	ec_ecdt->common.command_addr = ecdt_ptr->ec_control;
 	ec_ecdt->common.status_addr = ecdt_ptr->ec_control;
 	ec_ecdt->common.data_addr = ecdt_ptr->ec_data;
@@ -1571,22 +1576,22 @@ static int __init acpi_fake_ecdt_setup(char *str)
 }
 
 __setup("acpi_fake_ecdt", acpi_fake_ecdt_setup);
-static int __init acpi_ec_set_polling_mode(char *str)
+static int __init acpi_ec_set_intr_mode(char *str)
 {
-	int burst;
+	int intr;
 
-	if (!get_option(&str, &burst))
+	if (!get_option(&str, &intr))
 		return 0;
 
-	if (burst) {
-		acpi_ec_polling_mode = EC_BURST;
-		acpi_ec_driver.ops.add = acpi_ec_burst_add;
+	if (intr) {
+		acpi_ec_poll_mode = EC_INTR;
+		acpi_ec_driver.ops.add = acpi_ec_intr_add;
 	} else {
-		acpi_ec_polling_mode = EC_POLLING;
-		acpi_ec_driver.ops.add = acpi_ec_polling_add;
+		acpi_ec_poll_mode = EC_POLL;
+		acpi_ec_driver.ops.add = acpi_ec_poll_add;
 	}
-	printk(KERN_INFO PREFIX "EC %s mode.\n", burst ? "burst" : "polling");
+	printk(KERN_INFO PREFIX "EC %s mode.\n", intr ? "interrupt" : "polling");
 	return 0;
 }
 
-__setup("ec_burst=", acpi_ec_set_polling_mode);
+__setup("ec_intr=", acpi_ec_set_intr_mode);

drivers/acpi/events/evevent.c

@@ -5,7 +5,7 @@
  *****************************************************************************/
 
 /*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -73,7 +73,7 @@ acpi_status acpi_ev_initialize_events(void)
 	/* Make sure we have ACPI tables */
 
 	if (!acpi_gbl_DSDT) {
-		ACPI_DEBUG_PRINT((ACPI_DB_WARN, "No ACPI tables present!\n"));
+		ACPI_WARNING((AE_INFO, "No ACPI tables present!"));
 		return_ACPI_STATUS(AE_NO_ACPI_TABLES);
 	}
 
@@ -84,20 +84,63 @@ acpi_status acpi_ev_initialize_events(void)
 	 */
 	status = acpi_ev_fixed_event_initialize();
 	if (ACPI_FAILURE(status)) {
-		ACPI_REPORT_ERROR(("Unable to initialize fixed events, %s\n",
-				   acpi_format_exception(status)));
+		ACPI_EXCEPTION((AE_INFO, status,
+				"Unable to initialize fixed events"));
 		return_ACPI_STATUS(status);
 	}
 
 	status = acpi_ev_gpe_initialize();
 	if (ACPI_FAILURE(status)) {
-		ACPI_REPORT_ERROR(("Unable to initialize general purpose events, %s\n", acpi_format_exception(status)));
+		ACPI_EXCEPTION((AE_INFO, status,
+				"Unable to initialize general purpose events"));
 		return_ACPI_STATUS(status);
 	}
 
 	return_ACPI_STATUS(status);
 }
 
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ev_install_fadt_gpes
+ *
+ * PARAMETERS:  None
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Completes initialization of the FADT-defined GPE blocks
+ *              (0 and 1). This causes the _PRW methods to be run, so the HW
+ *              must be fully initialized at this point, including global lock
+ *              support.
+ *
+ ******************************************************************************/
+
+acpi_status acpi_ev_install_fadt_gpes(void)
+{
+	acpi_status status;
+
+	ACPI_FUNCTION_TRACE("ev_install_fadt_gpes");
+
+	/* Namespace must be locked */
+
+	status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE);
+	if (ACPI_FAILURE(status)) {
+		return (status);
+	}
+
+	/* FADT GPE Block 0 */
+
+	(void)acpi_ev_initialize_gpe_block(acpi_gbl_fadt_gpe_device,
+					   acpi_gbl_gpe_fadt_blocks[0]);
+
+	/* FADT GPE Block 1 */
+
+	(void)acpi_ev_initialize_gpe_block(acpi_gbl_fadt_gpe_device,
+					   acpi_gbl_gpe_fadt_blocks[1]);
+
+	(void)acpi_ut_release_mutex(ACPI_MTX_NAMESPACE);
+	return_ACPI_STATUS(AE_OK);
+}
+
 /*******************************************************************************
  *
  * FUNCTION:    acpi_ev_install_xrupt_handlers
@@ -120,7 +163,8 @@ acpi_status acpi_ev_install_xrupt_handlers(void)
 
 	status = acpi_ev_install_sci_handler();
 	if (ACPI_FAILURE(status)) {
-		ACPI_REPORT_ERROR(("Unable to install System Control Interrupt Handler, %s\n", acpi_format_exception(status)));
+		ACPI_EXCEPTION((AE_INFO, status,
+				"Unable to install System Control Interrupt handler"));
 		return_ACPI_STATUS(status);
 	}
 
@@ -128,7 +172,8 @@ acpi_status acpi_ev_install_xrupt_handlers(void)
 
 	status = acpi_ev_init_global_lock_handler();
 	if (ACPI_FAILURE(status)) {
-		ACPI_REPORT_ERROR(("Unable to initialize Global Lock handler, %s\n", acpi_format_exception(status)));
+		ACPI_EXCEPTION((AE_INFO, status,
+				"Unable to initialize Global Lock handler"));
 		return_ACPI_STATUS(status);
 	}
 
@@ -262,7 +307,9 @@ static u32 acpi_ev_fixed_event_dispatch(u32 event)
 					enable_register_id, 0,
 					ACPI_MTX_DO_NOT_LOCK);
 
-		ACPI_REPORT_ERROR(("No installed handler for fixed event [%08X]\n", event));
+		ACPI_ERROR((AE_INFO,
+			    "No installed handler for fixed event [%08X]",
+			    event));
 
 		return (ACPI_INTERRUPT_NOT_HANDLED);
 	}

drivers/acpi/events/evgpe.c

@@ -5,7 +5,7 @@
  *****************************************************************************/
 
 /*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -372,14 +372,14 @@ struct acpi_gpe_event_info *acpi_ev_get_gpe_event_info(acpi_handle gpe_device,
 
 u32 acpi_ev_gpe_detect(struct acpi_gpe_xrupt_info * gpe_xrupt_list)
 {
+	acpi_status status;
+	struct acpi_gpe_block_info *gpe_block;
+	struct acpi_gpe_register_info *gpe_register_info;
 	u32 int_status = ACPI_INTERRUPT_NOT_HANDLED;
 	u8 enabled_status_byte;
-	struct acpi_gpe_register_info *gpe_register_info;
 	u32 status_reg;
 	u32 enable_reg;
-	u32 flags;
-	acpi_status status;
-	struct acpi_gpe_block_info *gpe_block;
+	acpi_cpu_flags flags;
 	acpi_native_uint i;
 	acpi_native_uint j;
 
@@ -546,7 +546,11 @@ static void ACPI_SYSTEM_XFACE acpi_ev_asynch_execute_gpe_method(void *context)
 
 		status = acpi_ns_evaluate_by_handle(&info);
 		if (ACPI_FAILURE(status)) {
-			ACPI_REPORT_ERROR(("%s while evaluating method [%4.4s] for GPE[%2X]\n", acpi_format_exception(status), acpi_ut_get_node_name(local_gpe_event_info.dispatch.method_node), gpe_number));
+			ACPI_EXCEPTION((AE_INFO, status,
+					"While evaluating method [%4.4s] for GPE[%2X]",
+					acpi_ut_get_node_name
+					(local_gpe_event_info.dispatch.
+					 method_node), gpe_number));
 		}
 	}
 
@@ -599,8 +603,10 @@ acpi_ev_gpe_dispatch(struct acpi_gpe_event_info *gpe_event_info, u32 gpe_number)
 	    ACPI_GPE_EDGE_TRIGGERED) {
 		status = acpi_hw_clear_gpe(gpe_event_info);
 		if (ACPI_FAILURE(status)) {
-			ACPI_REPORT_ERROR(("acpi_ev_gpe_dispatch: %s, Unable to clear GPE[%2X]\n", acpi_format_exception(status), gpe_number));
-			return_VALUE(ACPI_INTERRUPT_NOT_HANDLED);
+			ACPI_EXCEPTION((AE_INFO, status,
+					"Unable to clear GPE[%2X]",
+					gpe_number));
+			return_UINT32(ACPI_INTERRUPT_NOT_HANDLED);
 		}
 	}
 
@@ -637,8 +643,10 @@ acpi_ev_gpe_dispatch(struct acpi_gpe_event_info *gpe_event_info, u32 gpe_number)
 		    ACPI_GPE_LEVEL_TRIGGERED) {
 			status = acpi_hw_clear_gpe(gpe_event_info);
 			if (ACPI_FAILURE(status)) {
-				ACPI_REPORT_ERROR(("acpi_ev_gpe_dispatch: %s, Unable to clear GPE[%2X]\n", acpi_format_exception(status), gpe_number));
-				return_VALUE(ACPI_INTERRUPT_NOT_HANDLED);
+				ACPI_EXCEPTION((AE_INFO, status,
+						"Unable to clear GPE[%2X]",
+						gpe_number));
+				return_UINT32(ACPI_INTERRUPT_NOT_HANDLED);
 			}
 		}
 		break;
@@ -651,8 +659,10 @@ acpi_ev_gpe_dispatch(struct acpi_gpe_event_info *gpe_event_info, u32 gpe_number)
 		 */
 		status = acpi_ev_disable_gpe(gpe_event_info);
 		if (ACPI_FAILURE(status)) {
-			ACPI_REPORT_ERROR(("acpi_ev_gpe_dispatch: %s, Unable to disable GPE[%2X]\n", acpi_format_exception(status), gpe_number));
-			return_VALUE(ACPI_INTERRUPT_NOT_HANDLED);
+			ACPI_EXCEPTION((AE_INFO, status,
+					"Unable to disable GPE[%2X]",
+					gpe_number));
+			return_UINT32(ACPI_INTERRUPT_NOT_HANDLED);
 		}
 
 		/*
@@ -663,7 +673,9 @@ acpi_ev_gpe_dispatch(struct acpi_gpe_event_info *gpe_event_info, u32 gpe_number)
 						     acpi_ev_asynch_execute_gpe_method,
 						     gpe_event_info);
 		if (ACPI_FAILURE(status)) {
-			ACPI_REPORT_ERROR(("acpi_ev_gpe_dispatch: %s, Unable to queue handler for GPE[%2X] - event disabled\n", acpi_format_exception(status), gpe_number));
+			ACPI_EXCEPTION((AE_INFO, status,
+					"Unable to queue handler for GPE[%2X] - event disabled",
+					gpe_number));
 		}
 		break;
 
@@ -671,7 +683,9 @@ acpi_ev_gpe_dispatch(struct acpi_gpe_event_info *gpe_event_info, u32 gpe_number)
 
 		/* No handler or method to run! */
 
-		ACPI_REPORT_ERROR(("acpi_ev_gpe_dispatch: No handler or method for GPE[%2X], disabling event\n", gpe_number));
+		ACPI_ERROR((AE_INFO,
+			    "No handler or method for GPE[%2X], disabling event",
+			    gpe_number));
 
 		/*
 		 * Disable the GPE.  The GPE will remain disabled until the ACPI
@@ -679,13 +693,15 @@ acpi_ev_gpe_dispatch(struct acpi_gpe_event_info *gpe_event_info, u32 gpe_number)
 		 */
 		status = acpi_ev_disable_gpe(gpe_event_info);
 		if (ACPI_FAILURE(status)) {
-			ACPI_REPORT_ERROR(("acpi_ev_gpe_dispatch: %s, Unable to disable GPE[%2X]\n", acpi_format_exception(status), gpe_number));
-			return_VALUE(ACPI_INTERRUPT_NOT_HANDLED);
+			ACPI_EXCEPTION((AE_INFO, status,
+					"Unable to disable GPE[%2X]",
+					gpe_number));
+			return_UINT32(ACPI_INTERRUPT_NOT_HANDLED);
 		}
 		break;
 	}
 
-	return_VALUE(ACPI_INTERRUPT_HANDLED);
+	return_UINT32(ACPI_INTERRUPT_HANDLED);
 }
 
 #ifdef ACPI_GPE_NOTIFY_CHECK
@@ -722,7 +738,9 @@ acpi_ev_check_for_wake_only_gpe(struct acpi_gpe_event_info *gpe_event_info)
 
 		acpi_ev_set_gpe_type(gpe_event_info, ACPI_GPE_TYPE_WAKE);
 
-		ACPI_REPORT_INFO(("GPE %p was updated from wake/run to wake-only\n", gpe_event_info));
+		ACPI_INFO((AE_INFO,
+			   "GPE %p was updated from wake/run to wake-only",
+			   gpe_event_info));
 
 		/* This was a wake-only GPE */
 

drivers/acpi/events/evgpeblk.c

@@ -5,7 +5,7 @@
  *****************************************************************************/
 
 /*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -78,7 +78,7 @@ acpi_ev_create_gpe_info_blocks(struct acpi_gpe_block_info *gpe_block);
  *
  * RETURN:      TRUE if the gpe_event is valid
  *
- * DESCRIPTION: Validate a GPE event.  DO NOT CALL FROM INTERRUPT LEVEL.
+ * DESCRIPTION: Validate a GPE event. DO NOT CALL FROM INTERRUPT LEVEL.
  *              Should be called only when the GPE lists are semaphore locked
  *              and not subject to change.
  *
@@ -136,7 +136,7 @@ acpi_status acpi_ev_walk_gpe_list(ACPI_GPE_CALLBACK gpe_walk_callback)
 	struct acpi_gpe_block_info *gpe_block;
 	struct acpi_gpe_xrupt_info *gpe_xrupt_info;
 	acpi_status status = AE_OK;
-	u32 flags;
+	acpi_cpu_flags flags;
 
 	ACPI_FUNCTION_TRACE("ev_walk_gpe_list");
 
@@ -264,7 +264,7 @@ acpi_ev_save_method_info(acpi_handle obj_handle,
 	 * 2) Edge/Level determination is based on the 2nd character
 	 *    of the method name
 	 *
-	 * NOTE: Default GPE type is RUNTIME.  May be changed later to WAKE
+	 * NOTE: Default GPE type is RUNTIME. May be changed later to WAKE
 	 * if a _PRW object is found that points to this GPE.
 	 */
 	switch (name[1]) {
@@ -279,9 +279,9 @@ acpi_ev_save_method_info(acpi_handle obj_handle,
 	default:
 		/* Unknown method type, just ignore it! */
 
-		ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-				  "Unknown GPE method type: %s (name not of form _Lxx or _Exx)\n",
-				  name));
+		ACPI_ERROR((AE_INFO,
+			    "Unknown GPE method type: %s (name not of form _Lxx or _Exx)",
+			    name));
 		return_ACPI_STATUS(AE_OK);
 	}
 
@@ -291,9 +291,9 @@ acpi_ev_save_method_info(acpi_handle obj_handle,
 	if (gpe_number == ACPI_UINT32_MAX) {
 		/* Conversion failed; invalid method, just ignore it */
 
-		ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-				  "Could not extract GPE number from name: %s (name is not of form _Lxx or _Exx)\n",
-				  name));
+		ACPI_ERROR((AE_INFO,
+			    "Could not extract GPE number from name: %s (name is not of form _Lxx or _Exx)",
+			    name));
 		return_ACPI_STATUS(AE_OK);
 	}
 
@@ -313,14 +313,14 @@ acpi_ev_save_method_info(acpi_handle obj_handle,
 
 	/*
 	 * Now we can add this information to the gpe_event_info block
-	 * for use during dispatch of this GPE.  Default type is RUNTIME, although
+	 * for use during dispatch of this GPE. Default type is RUNTIME, although
 	 * this may change when the _PRW methods are executed later.
 	 */
 	gpe_event_info =
 	    &gpe_block->event_info[gpe_number - gpe_block->block_base_number];
 
-	gpe_event_info->flags = (u8) (type | ACPI_GPE_DISPATCH_METHOD |
-				      ACPI_GPE_TYPE_RUNTIME);
+	gpe_event_info->flags = (u8)
+	    (type | ACPI_GPE_DISPATCH_METHOD | ACPI_GPE_TYPE_RUNTIME);
 
 	gpe_event_info->dispatch.method_node =
 	    (struct acpi_namespace_node *)obj_handle;
@@ -341,11 +341,11 @@ acpi_ev_save_method_info(acpi_handle obj_handle,
  *
  * PARAMETERS:  Callback from walk_namespace
  *
- * RETURN:      Status.  NOTE: We ignore errors so that the _PRW walk is
+ * RETURN:      Status. NOTE: We ignore errors so that the _PRW walk is
  *              not aborted on a single _PRW failure.
  *
  * DESCRIPTION: Called from acpi_walk_namespace. Expects each object to be a
- *              Device.  Run the _PRW method.  If present, extract the GPE
+ *              Device. Run the _PRW method. If present, extract the GPE
  *              number and mark the GPE as a WAKE GPE.
  *
  ******************************************************************************/
@@ -443,6 +443,7 @@ acpi_ev_match_prw_and_gpe(acpi_handle obj_handle,
 
 		gpe_event_info->flags &=
 		    ~(ACPI_GPE_WAKE_ENABLED | ACPI_GPE_RUN_ENABLED);
+
 		status =
 		    acpi_ev_set_gpe_type(gpe_event_info, ACPI_GPE_TYPE_WAKE);
 		if (ACPI_FAILURE(status)) {
@@ -466,7 +467,7 @@ acpi_ev_match_prw_and_gpe(acpi_handle obj_handle,
  *
  * RETURN:      A GPE interrupt block
  *
- * DESCRIPTION: Get or Create a GPE interrupt block.  There is one interrupt
+ * DESCRIPTION: Get or Create a GPE interrupt block. There is one interrupt
  *              block per unique interrupt level used for GPEs.
  *              Should be called only when the GPE lists are semaphore locked
  *              and not subject to change.
@@ -479,7 +480,7 @@ static struct acpi_gpe_xrupt_info *acpi_ev_get_gpe_xrupt_block(u32
 	struct acpi_gpe_xrupt_info *next_gpe_xrupt;
 	struct acpi_gpe_xrupt_info *gpe_xrupt;
 	acpi_status status;
-	u32 flags;
+	acpi_cpu_flags flags;
 
 	ACPI_FUNCTION_TRACE("ev_get_gpe_xrupt_block");
 
@@ -526,9 +527,9 @@ static struct acpi_gpe_xrupt_info *acpi_ev_get_gpe_xrupt_block(u32
 							   acpi_ev_gpe_xrupt_handler,
 							   gpe_xrupt);
 		if (ACPI_FAILURE(status)) {
-			ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-					  "Could not install GPE interrupt handler at level 0x%X\n",
-					  interrupt_number));
+			ACPI_ERROR((AE_INFO,
+				    "Could not install GPE interrupt handler at level 0x%X",
+				    interrupt_number));
 			return_PTR(NULL);
 		}
 	}
@@ -553,7 +554,7 @@ static acpi_status
 acpi_ev_delete_gpe_xrupt(struct acpi_gpe_xrupt_info *gpe_xrupt)
 {
 	acpi_status status;
-	u32 flags;
+	acpi_cpu_flags flags;
 
 	ACPI_FUNCTION_TRACE("ev_delete_gpe_xrupt");
 
@@ -566,8 +567,9 @@ acpi_ev_delete_gpe_xrupt(struct acpi_gpe_xrupt_info *gpe_xrupt)
 
 	/* Disable this interrupt */
 
-	status = acpi_os_remove_interrupt_handler(gpe_xrupt->interrupt_number,
-						  acpi_ev_gpe_xrupt_handler);
+	status =
+	    acpi_os_remove_interrupt_handler(gpe_xrupt->interrupt_number,
+					     acpi_ev_gpe_xrupt_handler);
 	if (ACPI_FAILURE(status)) {
 		return_ACPI_STATUS(status);
 	}
@@ -610,7 +612,7 @@ acpi_ev_install_gpe_block(struct acpi_gpe_block_info *gpe_block,
 	struct acpi_gpe_block_info *next_gpe_block;
 	struct acpi_gpe_xrupt_info *gpe_xrupt_block;
 	acpi_status status;
-	u32 flags;
+	acpi_cpu_flags flags;
 
 	ACPI_FUNCTION_TRACE("ev_install_gpe_block");
 
@@ -663,7 +665,7 @@ acpi_ev_install_gpe_block(struct acpi_gpe_block_info *gpe_block,
 acpi_status acpi_ev_delete_gpe_block(struct acpi_gpe_block_info *gpe_block)
 {
 	acpi_status status;
-	u32 flags;
+	acpi_cpu_flags flags;
 
 	ACPI_FUNCTION_TRACE("ev_install_gpe_block");
 
@@ -743,22 +745,22 @@ acpi_ev_create_gpe_info_blocks(struct acpi_gpe_block_info *gpe_block)
 					       sizeof(struct
 						      acpi_gpe_register_info));
 	if (!gpe_register_info) {
-		ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-				  "Could not allocate the gpe_register_info table\n"));
+		ACPI_ERROR((AE_INFO,
+			    "Could not allocate the gpe_register_info table"));
 		return_ACPI_STATUS(AE_NO_MEMORY);
 	}
 
 	/*
 	 * Allocate the GPE event_info block. There are eight distinct GPEs
-	 * per register.  Initialization to zeros is sufficient.
+	 * per register. Initialization to zeros is sufficient.
 	 */
 	gpe_event_info = ACPI_MEM_CALLOCATE(((acpi_size) gpe_block->
 					     register_count *
 					     ACPI_GPE_REGISTER_WIDTH) *
 					    sizeof(struct acpi_gpe_event_info));
 	if (!gpe_event_info) {
-		ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-				  "Could not allocate the gpe_event_info table\n"));
+		ACPI_ERROR((AE_INFO,
+			    "Could not allocate the gpe_event_info table"));
 		status = AE_NO_MEMORY;
 		goto error_exit;
 	}
@@ -769,9 +771,9 @@ acpi_ev_create_gpe_info_blocks(struct acpi_gpe_block_info *gpe_block)
 	gpe_block->event_info = gpe_event_info;
 
 	/*
-	 * Initialize the GPE Register and Event structures.  A goal of these
+	 * Initialize the GPE Register and Event structures. A goal of these
 	 * tables is to hide the fact that there are two separate GPE register sets
-	 * in a given gpe hardware block, the status registers occupy the first half,
+	 * in a given GPE hardware block, the status registers occupy the first half,
 	 * and the enable registers occupy the second half.
 	 */
 	this_register = gpe_register_info;
@@ -812,11 +814,8 @@ acpi_ev_create_gpe_info_blocks(struct acpi_gpe_block_info *gpe_block)
 			this_event++;
 		}
 
-		/*
-		 * Clear the status/enable registers.  Note that status registers
-		 * are cleared by writing a '1', while enable registers are cleared
-		 * by writing a '0'.
-		 */
+		/* Disable all GPEs within this register */
+
 		status = acpi_hw_low_level_write(ACPI_GPE_REGISTER_WIDTH, 0x00,
 						 &this_register->
 						 enable_address);
@@ -824,6 +823,8 @@ acpi_ev_create_gpe_info_blocks(struct acpi_gpe_block_info *gpe_block)
 			goto error_exit;
 		}
 
+		/* Clear any pending GPE events within this register */
+
 		status = acpi_hw_low_level_write(ACPI_GPE_REGISTER_WIDTH, 0xFF,
 						 &this_register->
 						 status_address);
@@ -860,7 +861,9 @@ acpi_ev_create_gpe_info_blocks(struct acpi_gpe_block_info *gpe_block)
  *
  * RETURN:      Status
  *
- * DESCRIPTION: Create and Install a block of GPE registers
+ * DESCRIPTION: Create and Install a block of GPE registers. All GPEs within
+ *              the block are disabled at exit.
+ *              Note: Assumes namespace is locked.
  *
  ******************************************************************************/
 
@@ -872,14 +875,8 @@ acpi_ev_create_gpe_block(struct acpi_namespace_node *gpe_device,
 			 u32 interrupt_number,
 			 struct acpi_gpe_block_info **return_gpe_block)
 {
-	struct acpi_gpe_block_info *gpe_block;
-	struct acpi_gpe_event_info *gpe_event_info;
-	acpi_native_uint i;
-	acpi_native_uint j;
-	u32 wake_gpe_count;
-	u32 gpe_enabled_count;
 	acpi_status status;
-	struct acpi_gpe_walk_info gpe_info;
+	struct acpi_gpe_block_info *gpe_block;
 
 	ACPI_FUNCTION_TRACE("ev_create_gpe_block");
 
@@ -896,22 +893,24 @@ acpi_ev_create_gpe_block(struct acpi_namespace_node *gpe_device,
 
 	/* Initialize the new GPE block */
 
+	gpe_block->node = gpe_device;
 	gpe_block->register_count = register_count;
 	gpe_block->block_base_number = gpe_block_base_number;
-	gpe_block->node = gpe_device;
 
 	ACPI_MEMCPY(&gpe_block->block_address, gpe_block_address,
 		    sizeof(struct acpi_generic_address));
 
-	/* Create the register_info and event_info sub-structures */
-
+	/*
+	 * Create the register_info and event_info sub-structures
+	 * Note: disables and clears all GPEs in the block
+	 */
 	status = acpi_ev_create_gpe_info_blocks(gpe_block);
 	if (ACPI_FAILURE(status)) {
 		ACPI_MEM_FREE(gpe_block);
 		return_ACPI_STATUS(status);
 	}
 
-	/* Install the new block in the global list(s) */
+	/* Install the new block in the global lists */
 
 	status = acpi_ev_install_gpe_block(gpe_block, interrupt_number);
 	if (ACPI_FAILURE(status)) {
@@ -926,16 +925,70 @@ acpi_ev_create_gpe_block(struct acpi_namespace_node *gpe_device,
 					acpi_ev_save_method_info, gpe_block,
 					NULL);
 
+	/* Return the new block */
+
+	if (return_gpe_block) {
+		(*return_gpe_block) = gpe_block;
+	}
+
+	ACPI_DEBUG_PRINT((ACPI_DB_INIT,
+			  "GPE %02X to %02X [%4.4s] %u regs on int 0x%X\n",
+			  (u32) gpe_block->block_base_number,
+			  (u32) (gpe_block->block_base_number +
+				 ((gpe_block->register_count *
+				   ACPI_GPE_REGISTER_WIDTH) - 1)),
+			  gpe_device->name.ascii, gpe_block->register_count,
+			  interrupt_number));
+
+	return_ACPI_STATUS(AE_OK);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ev_initialize_gpe_block
+ *
+ * PARAMETERS:  gpe_device          - Handle to the parent GPE block
+ *              gpe_block           - Gpe Block info
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Initialize and enable a GPE block. First find and run any
+ *              _PRT methods associated with the block, then enable the
+ *              appropriate GPEs.
+ *              Note: Assumes namespace is locked.
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ev_initialize_gpe_block(struct acpi_namespace_node *gpe_device,
+			     struct acpi_gpe_block_info *gpe_block)
+{
+	acpi_status status;
+	struct acpi_gpe_event_info *gpe_event_info;
+	struct acpi_gpe_walk_info gpe_info;
+	u32 wake_gpe_count;
+	u32 gpe_enabled_count;
+	acpi_native_uint i;
+	acpi_native_uint j;
+
+	ACPI_FUNCTION_TRACE("ev_initialize_gpe_block");
+
+	/* Ignore a null GPE block (e.g., if no GPE block 1 exists) */
+
+	if (!gpe_block) {
+		return_ACPI_STATUS(AE_OK);
+	}
+
 	/*
-	 * Runtime option: Should Wake GPEs be enabled at runtime?  The default
-	 * is No, they should only be enabled just as the machine goes to sleep.
+	 * Runtime option: Should wake GPEs be enabled at runtime?  The default
+	 * is no, they should only be enabled just as the machine goes to sleep.
 	 */
 	if (acpi_gbl_leave_wake_gpes_disabled) {
 		/*
-		 * Differentiate RUNTIME vs WAKE GPEs, via the _PRW control methods.
-		 * (Each GPE that has one or more _PRWs that reference it is by
-		 * definition a WAKE GPE and will not be enabled while the machine
-		 * is running.)
+		 * Differentiate runtime vs wake GPEs, via the _PRW control methods.
+		 * Each GPE that has one or more _PRWs that reference it is by
+		 * definition a wake GPE and will not be enabled while the machine
+		 * is running.
 		 */
 		gpe_info.gpe_block = gpe_block;
 		gpe_info.gpe_device = gpe_device;
@@ -948,9 +1001,12 @@ acpi_ev_create_gpe_block(struct acpi_namespace_node *gpe_device,
 	}
 
 	/*
-	 * Enable all GPEs in this block that are 1) "runtime" or "run/wake" GPEs,
-	 * and 2) have a corresponding _Lxx or _Exx method.  All other GPEs must
-	 * be enabled via the acpi_enable_gpe() external interface.
+	 * Enable all GPEs in this block that have these attributes:
+	 * 1) are "runtime" or "run/wake" GPEs, and
+	 * 2) have a corresponding _Lxx or _Exx method
+	 *
+	 * Any other GPEs within this block must be enabled via the acpi_enable_gpe()
+	 * external interface.
 	 */
 	wake_gpe_count = 0;
 	gpe_enabled_count = 0;
@@ -976,32 +1032,19 @@ acpi_ev_create_gpe_block(struct acpi_namespace_node *gpe_device,
 		}
 	}
 
-	/* Dump info about this GPE block */
-
-	ACPI_DEBUG_PRINT((ACPI_DB_INIT,
-			  "GPE %02X to %02X [%4.4s] %u regs on int 0x%X\n",
-			  (u32) gpe_block->block_base_number,
-			  (u32) (gpe_block->block_base_number +
-				 ((gpe_block->register_count *
-				   ACPI_GPE_REGISTER_WIDTH) - 1)),
-			  gpe_device->name.ascii, gpe_block->register_count,
-			  interrupt_number));
-
-	/* Enable all valid GPEs found above */
-
-	status = acpi_hw_enable_runtime_gpe_block(NULL, gpe_block);
-
 	ACPI_DEBUG_PRINT((ACPI_DB_INIT,
 			  "Found %u Wake, Enabled %u Runtime GPEs in this block\n",
 			  wake_gpe_count, gpe_enabled_count));
 
-	/* Return the new block */
+	/* Enable all valid runtime GPEs found above */
 
-	if (return_gpe_block) {
-		(*return_gpe_block) = gpe_block;
+	status = acpi_hw_enable_runtime_gpe_block(NULL, gpe_block);
+	if (ACPI_FAILURE(status)) {
+		ACPI_ERROR((AE_INFO, "Could not enable GPEs in gpe_block %p",
+			    gpe_block));
 	}
 
-	return_ACPI_STATUS(AE_OK);
+	return_ACPI_STATUS(status);
 }
 
 /*******************************************************************************
@@ -1072,8 +1115,8 @@ acpi_status acpi_ev_gpe_initialize(void)
 						  &acpi_gbl_gpe_fadt_blocks[0]);
 
 		if (ACPI_FAILURE(status)) {
-			ACPI_REPORT_ERROR(("Could not create GPE Block 0, %s\n",
-					   acpi_format_exception(status)));
+			ACPI_EXCEPTION((AE_INFO, status,
+					"Could not create GPE Block 0"));
 		}
 	}
 
@@ -1086,7 +1129,12 @@ acpi_status acpi_ev_gpe_initialize(void)
 
 		if ((register_count0) &&
 		    (gpe_number_max >= acpi_gbl_FADT->gpe1_base)) {
-			ACPI_REPORT_ERROR(("GPE0 block (GPE 0 to %d) overlaps the GPE1 block (GPE %d to %d) - Ignoring GPE1\n", gpe_number_max, acpi_gbl_FADT->gpe1_base, acpi_gbl_FADT->gpe1_base + ((register_count1 * ACPI_GPE_REGISTER_WIDTH) - 1)));
+			ACPI_ERROR((AE_INFO,
+				    "GPE0 block (GPE 0 to %d) overlaps the GPE1 block (GPE %d to %d) - Ignoring GPE1",
+				    gpe_number_max, acpi_gbl_FADT->gpe1_base,
+				    acpi_gbl_FADT->gpe1_base +
+				    ((register_count1 *
+				      ACPI_GPE_REGISTER_WIDTH) - 1)));
 
 			/* Ignore GPE1 block by setting the register count to zero */
 
@@ -1104,7 +1152,8 @@ acpi_status acpi_ev_gpe_initialize(void)
 						     [1]);
 
 			if (ACPI_FAILURE(status)) {
-				ACPI_REPORT_ERROR(("Could not create GPE Block 1, %s\n", acpi_format_exception(status)));
+				ACPI_EXCEPTION((AE_INFO, status,
+						"Could not create GPE Block 1"));
 			}
 
 			/*
@@ -1130,7 +1179,9 @@ acpi_status acpi_ev_gpe_initialize(void)
 	/* Check for Max GPE number out-of-range */
 
 	if (gpe_number_max > ACPI_GPE_MAX) {
-		ACPI_REPORT_ERROR(("Maximum GPE number from FADT is too large: 0x%X\n", gpe_number_max));
+		ACPI_ERROR((AE_INFO,
+			    "Maximum GPE number from FADT is too large: 0x%X",
+			    gpe_number_max));
 		status = AE_BAD_VALUE;
 		goto cleanup;
 	}

drivers/acpi/events/evmisc.c

@@ -5,7 +5,7 @@
  *****************************************************************************/
 
 /*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -303,7 +303,8 @@ static void ACPI_SYSTEM_XFACE acpi_ev_global_lock_thread(void *context)
 		    acpi_os_signal_semaphore(acpi_gbl_global_lock_semaphore,
 					     acpi_gbl_global_lock_thread_count);
 		if (ACPI_FAILURE(status)) {
-			ACPI_REPORT_ERROR(("Could not signal Global Lock semaphore\n"));
+			ACPI_ERROR((AE_INFO,
+				    "Could not signal Global Lock semaphore"));
 		}
 	}
 }
@@ -344,7 +345,8 @@ static u32 acpi_ev_global_lock_handler(void *context)
 						     acpi_ev_global_lock_thread,
 						     context);
 		if (ACPI_FAILURE(status)) {
-			ACPI_REPORT_ERROR(("Could not queue Global Lock thread, %s\n", acpi_format_exception(status)));
+			ACPI_EXCEPTION((AE_INFO, status,
+					"Could not queue Global Lock thread"));
 
 			return (ACPI_INTERRUPT_NOT_HANDLED);
 		}
@@ -384,7 +386,8 @@ acpi_status acpi_ev_init_global_lock_handler(void)
 	 * with an error.
 	 */
 	if (status == AE_NO_HARDWARE_RESPONSE) {
-		ACPI_REPORT_ERROR(("No response from Global Lock hardware, disabling lock\n"));
+		ACPI_ERROR((AE_INFO,
+			    "No response from Global Lock hardware, disabling lock"));
 
 		acpi_gbl_global_lock_present = FALSE;
 		status = AE_OK;
@@ -480,7 +483,8 @@ acpi_status acpi_ev_release_global_lock(void)
 	ACPI_FUNCTION_TRACE("ev_release_global_lock");
 
 	if (!acpi_gbl_global_lock_thread_count) {
-		ACPI_REPORT_WARNING(("Cannot release HW Global Lock, it has not been acquired\n"));
+		ACPI_WARNING((AE_INFO,
+			      "Cannot release HW Global Lock, it has not been acquired"));
 		return_ACPI_STATUS(AE_NOT_ACQUIRED);
 	}
 
@@ -542,9 +546,9 @@ void acpi_ev_terminate(void)
 		for (i = 0; i < ACPI_NUM_FIXED_EVENTS; i++) {
 			status = acpi_disable_event((u32) i, 0);
 			if (ACPI_FAILURE(status)) {
-				ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-						  "Could not disable fixed event %d\n",
-						  (u32) i));
+				ACPI_ERROR((AE_INFO,
+					    "Could not disable fixed event %d",
+					    (u32) i));
 			}
 		}
 
@@ -556,8 +560,7 @@ void acpi_ev_terminate(void)
 
 		status = acpi_ev_remove_sci_handler();
 		if (ACPI_FAILURE(status)) {
-			ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-					  "Could not remove SCI handler\n"));
+			ACPI_ERROR((AE_INFO, "Could not remove SCI handler"));
 		}
 	}
 
@@ -570,8 +573,7 @@ void acpi_ev_terminate(void)
 	if (acpi_gbl_original_mode == ACPI_SYS_MODE_LEGACY) {
 		status = acpi_disable();
 		if (ACPI_FAILURE(status)) {
-			ACPI_DEBUG_PRINT((ACPI_DB_WARN,
-					  "acpi_disable failed\n"));
+			ACPI_WARNING((AE_INFO, "acpi_disable failed"));
 		}
 	}
 	return_VOID;

drivers/acpi/events/evregion.c

@@ -5,7 +5,7 @@
  *****************************************************************************/
 
 /*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -295,12 +295,12 @@ acpi_ev_address_space_dispatch(union acpi_operand_object *region_obj,
 
 	handler_desc = region_obj->region.handler;
 	if (!handler_desc) {
-		ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-				  "No handler for Region [%4.4s] (%p) [%s]\n",
-				  acpi_ut_get_node_name(region_obj->region.
-							node), region_obj,
-				  acpi_ut_get_region_name(region_obj->region.
-							  space_id)));
+		ACPI_ERROR((AE_INFO,
+			    "No handler for Region [%4.4s] (%p) [%s]",
+			    acpi_ut_get_node_name(region_obj->region.node),
+			    region_obj,
+			    acpi_ut_get_region_name(region_obj->region.
+						    space_id)));
 
 		return_ACPI_STATUS(AE_NOT_EXIST);
 	}
@@ -317,12 +317,11 @@ acpi_ev_address_space_dispatch(union acpi_operand_object *region_obj,
 		if (!region_setup) {
 			/* No initialization routine, exit with error */
 
-			ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-					  "No init routine for region(%p) [%s]\n",
-					  region_obj,
-					  acpi_ut_get_region_name(region_obj->
-								  region.
-								  space_id)));
+			ACPI_ERROR((AE_INFO,
+				    "No init routine for region(%p) [%s]",
+				    region_obj,
+				    acpi_ut_get_region_name(region_obj->region.
+							    space_id)));
 			return_ACPI_STATUS(AE_NOT_EXIST);
 		}
 
@@ -347,12 +346,11 @@ acpi_ev_address_space_dispatch(union acpi_operand_object *region_obj,
 		/* Check for failure of the Region Setup */
 
 		if (ACPI_FAILURE(status)) {
-			ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-					  "Region Init: %s [%s]\n",
-					  acpi_format_exception(status),
-					  acpi_ut_get_region_name(region_obj->
-								  region.
-								  space_id)));
+			ACPI_EXCEPTION((AE_INFO, status,
+					"During region initialization: [%s]",
+					acpi_ut_get_region_name(region_obj->
+								region.
+								space_id)));
 			return_ACPI_STATUS(status);
 		}
 
@@ -406,10 +404,9 @@ acpi_ev_address_space_dispatch(union acpi_operand_object *region_obj,
 			 region_obj2->extra.region_context);
 
 	if (ACPI_FAILURE(status)) {
-		ACPI_REPORT_ERROR(("Handler for [%s] returned %s\n",
-				   acpi_ut_get_region_name(region_obj->region.
-							   space_id),
-				   acpi_format_exception(status)));
+		ACPI_EXCEPTION((AE_INFO, status, "Returned by Handler for [%s]",
+				acpi_ut_get_region_name(region_obj->region.
+							space_id)));
 	}
 
 	if (!
@@ -501,12 +498,10 @@ acpi_ev_detach_region(union acpi_operand_object *region_obj,
 
 			status = acpi_ev_execute_reg_method(region_obj, 0);
 			if (ACPI_FAILURE(status)) {
-				ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-						  "%s from region _REG, [%s]\n",
-						  acpi_format_exception(status),
-						  acpi_ut_get_region_name
-						  (region_obj->region.
-						   space_id)));
+				ACPI_EXCEPTION((AE_INFO, status,
+						"from region _REG, [%s]",
+						acpi_ut_get_region_name
+						(region_obj->region.space_id)));
 			}
 
 			if (acpi_ns_is_locked) {
@@ -528,12 +523,10 @@ acpi_ev_detach_region(union acpi_operand_object *region_obj,
 			/* Init routine may fail, Just ignore errors */
 
 			if (ACPI_FAILURE(status)) {
-				ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-						  "%s from region init, [%s]\n",
-						  acpi_format_exception(status),
-						  acpi_ut_get_region_name
-						  (region_obj->region.
-						   space_id)));
+				ACPI_EXCEPTION((AE_INFO, status,
+						"from region init, [%s]",
+						acpi_ut_get_region_name
+						(region_obj->region.space_id)));
 			}
 
 			region_obj->region.flags &= ~(AOPOBJ_SETUP_COMPLETE);

drivers/acpi/events/evrgnini.c

@@ -5,7 +5,7 @@
  *****************************************************************************/
 
 /*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -233,7 +233,11 @@ acpi_ev_pci_config_region_setup(acpi_handle handle,
 							 */
 							status = AE_OK;
 						} else {
-							ACPI_REPORT_ERROR(("Could not install pci_config handler for Root Bridge %4.4s, %s\n", acpi_ut_get_node_name(pci_root_node), acpi_format_exception(status)));
+							ACPI_EXCEPTION((AE_INFO,
+									status,
+									"Could not install pci_config handler for Root Bridge %4.4s",
+									acpi_ut_get_node_name
+									(pci_root_node)));
 						}
 					}
 					break;

drivers/acpi/events/evsci.c

@@ -6,7 +6,7 @@
  ******************************************************************************/
 
 /*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -88,7 +88,7 @@ static u32 ACPI_SYSTEM_XFACE acpi_ev_sci_xrupt_handler(void *context)
 	 */
 	interrupt_handled |= acpi_ev_gpe_detect(gpe_xrupt_list);
 
-	return_VALUE(interrupt_handled);
+	return_UINT32(interrupt_handled);
 }
 
 /*******************************************************************************
@@ -121,7 +121,7 @@ u32 ACPI_SYSTEM_XFACE acpi_ev_gpe_xrupt_handler(void *context)
 	 */
 	interrupt_handled |= acpi_ev_gpe_detect(gpe_xrupt_list);
 
-	return_VALUE(interrupt_handled);
+	return_UINT32(interrupt_handled);
 }
 
 /******************************************************************************

drivers/acpi/events/evxface.c

@@ -5,7 +5,7 @@
  *****************************************************************************/
 
 /*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -143,8 +143,8 @@ acpi_install_fixed_event_handler(u32 event,
 	if (ACPI_SUCCESS(status))
 		status = acpi_enable_event(event, 0);
 	if (ACPI_FAILURE(status)) {
-		ACPI_DEBUG_PRINT((ACPI_DB_WARN,
-				  "Could not enable fixed event.\n"));
+		ACPI_WARNING((AE_INFO, "Could not enable fixed event %X",
+			      event));
 
 		/* Remove the handler */
 
@@ -204,10 +204,11 @@ acpi_remove_fixed_event_handler(u32 event, acpi_event_handler handler)
 	acpi_gbl_fixed_event_handlers[event].context = NULL;
 
 	if (ACPI_FAILURE(status)) {
-		ACPI_DEBUG_PRINT((ACPI_DB_WARN,
-				  "Could not write to fixed event enable register.\n"));
+		ACPI_WARNING((AE_INFO,
+			      "Could not write to fixed event enable register %X",
+			      event));
 	} else {
-		ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Disabled fixed event %X.\n",
+		ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Disabled fixed event %X\n",
 				  event));
 	}
 
@@ -434,7 +435,7 @@ acpi_remove_notify_handler(acpi_handle device,
 
 	if (device == ACPI_ROOT_OBJECT) {
 		ACPI_DEBUG_PRINT((ACPI_DB_INFO,
-				  "Removing notify handler for ROOT object.\n"));
+				  "Removing notify handler for namespace root object\n"));
 
 		if (((handler_type & ACPI_SYSTEM_NOTIFY) &&
 		     !acpi_gbl_system_notify.handler) ||
@@ -562,7 +563,7 @@ acpi_install_gpe_handler(acpi_handle gpe_device,
 	struct acpi_gpe_event_info *gpe_event_info;
 	struct acpi_handler_info *handler;
 	acpi_status status;
-	u32 flags;
+	acpi_cpu_flags flags;
 
 	ACPI_FUNCTION_TRACE("acpi_install_gpe_handler");
 
@@ -653,7 +654,7 @@ acpi_remove_gpe_handler(acpi_handle gpe_device,
 	struct acpi_gpe_event_info *gpe_event_info;
 	struct acpi_handler_info *handler;
 	acpi_status status;
-	u32 flags;
+	acpi_cpu_flags flags;
 
 	ACPI_FUNCTION_TRACE("acpi_remove_gpe_handler");
 

drivers/acpi/events/evxfevnt.c

@@ -5,7 +5,7 @@
  *****************************************************************************/
 
 /*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -70,8 +70,7 @@ acpi_status acpi_enable(void)
 	/* Make sure we have the FADT */
 
 	if (!acpi_gbl_FADT) {
-		ACPI_DEBUG_PRINT((ACPI_DB_WARN,
-				  "No FADT information present!\n"));
+		ACPI_WARNING((AE_INFO, "No FADT information present!"));
 		return_ACPI_STATUS(AE_NO_ACPI_TABLES);
 	}
 
@@ -83,7 +82,8 @@ acpi_status acpi_enable(void)
 
 		status = acpi_hw_set_mode(ACPI_SYS_MODE_ACPI);
 		if (ACPI_FAILURE(status)) {
-			ACPI_REPORT_ERROR(("Could not transition to ACPI mode.\n"));
+			ACPI_ERROR((AE_INFO,
+				    "Could not transition to ACPI mode"));
 			return_ACPI_STATUS(status);
 		}
 
@@ -113,8 +113,7 @@ acpi_status acpi_disable(void)
 	ACPI_FUNCTION_TRACE("acpi_disable");
 
 	if (!acpi_gbl_FADT) {
-		ACPI_DEBUG_PRINT((ACPI_DB_WARN,
-				  "No FADT information present!\n"));
+		ACPI_WARNING((AE_INFO, "No FADT information present!"));
 		return_ACPI_STATUS(AE_NO_ACPI_TABLES);
 	}
 
@@ -127,8 +126,8 @@ acpi_status acpi_disable(void)
 		status = acpi_hw_set_mode(ACPI_SYS_MODE_LEGACY);
 
 		if (ACPI_FAILURE(status)) {
-			ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-					  "Could not exit ACPI mode to legacy mode"));
+			ACPI_ERROR((AE_INFO,
+				    "Could not exit ACPI mode to legacy mode"));
 			return_ACPI_STATUS(status);
 		}
 
@@ -185,9 +184,9 @@ acpi_status acpi_enable_event(u32 event, u32 flags)
 	}
 
 	if (value != 1) {
-		ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-				  "Could not enable %s event\n",
-				  acpi_ut_get_event_name(event)));
+		ACPI_ERROR((AE_INFO,
+			    "Could not enable %s event",
+			    acpi_ut_get_event_name(event)));
 		return_ACPI_STATUS(AE_NO_HARDWARE_RESPONSE);
 	}
 
@@ -384,9 +383,9 @@ acpi_status acpi_disable_event(u32 event, u32 flags)
 	}
 
 	if (value != 0) {
-		ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-				  "Could not disable %s events\n",
-				  acpi_ut_get_event_name(event)));
+		ACPI_ERROR((AE_INFO,
+			    "Could not disable %s events",
+			    acpi_ut_get_event_name(event)));
 		return_ACPI_STATUS(AE_NO_HARDWARE_RESPONSE);
 	}
 
@@ -626,6 +625,13 @@ acpi_install_gpe_block(acpi_handle gpe_device,
 		goto unlock_and_exit;
 	}
 
+	/* Run the _PRW methods and enable the GPEs */
+
+	status = acpi_ev_initialize_gpe_block(node, gpe_block);
+	if (ACPI_FAILURE(status)) {
+		goto unlock_and_exit;
+	}
+
 	/* Get the device_object attached to the node */
 
 	obj_desc = acpi_ns_get_attached_object(node);

drivers/acpi/events/evxfregn.c

@@ -6,7 +6,7 @@
  *****************************************************************************/
 
 /*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without

drivers/acpi/executer/exconfig.c

@@ -5,7 +5,7 @@
  *****************************************************************************/
 
 /*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -413,9 +413,9 @@ acpi_ex_load_op(union acpi_operand_object *obj_desc,
 	    (!ACPI_STRNCMP(table_ptr->signature,
 			   acpi_gbl_table_data[ACPI_TABLE_SSDT].signature,
 			   acpi_gbl_table_data[ACPI_TABLE_SSDT].sig_length))) {
-		ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-				  "Table has invalid signature [%4.4s], must be SSDT or PSDT\n",
-				  table_ptr->signature));
+		ACPI_ERROR((AE_INFO,
+			    "Table has invalid signature [%4.4s], must be SSDT or PSDT",
+			    table_ptr->signature));
 		status = AE_BAD_SIGNATURE;
 		goto cleanup;
 	}

drivers/acpi/executer/exconvrt.c

@@ -5,7 +5,7 @@
  *****************************************************************************/
 
 /*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -504,18 +504,12 @@ acpi_ex_convert_to_string(union acpi_operand_object * obj_desc,
 		}
 
 		/*
-		 * Perform the conversion.
+		 * Create a new string object and string buffer
 		 * (-1 because of extra separator included in string_length from above)
 		 */
-		string_length--;
-		if (string_length > ACPI_MAX_STRING_CONVERSION) {	/* ACPI limit */
-			return_ACPI_STATUS(AE_AML_STRING_LIMIT);
-		}
-
-		/* Create a new string object and string buffer */
-
 		return_desc =
-		    acpi_ut_create_string_object((acpi_size) string_length);
+		    acpi_ut_create_string_object((acpi_size)
+						 (string_length - 1));
 		if (!return_desc) {
 			return_ACPI_STATUS(AE_NO_MEMORY);
 		}
@@ -647,7 +641,9 @@ acpi_ex_convert_to_target_type(acpi_object_type destination_type,
 			break;
 
 		default:
-			ACPI_REPORT_ERROR(("Bad destination type during conversion: %X\n", destination_type));
+			ACPI_ERROR((AE_INFO,
+				    "Bad destination type during conversion: %X",
+				    destination_type));
 			status = AE_AML_INTERNAL;
 			break;
 		}
@@ -660,17 +656,13 @@ acpi_ex_convert_to_target_type(acpi_object_type destination_type,
 		break;
 
 	default:
-		ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-				  "Unknown Target type ID 0x%X Op %s dest_type %s\n",
-				  GET_CURRENT_ARG_TYPE(walk_state->op_info->
-						       runtime_args),
-				  walk_state->op_info->name,
-				  acpi_ut_get_type_name(destination_type)));
-
-		ACPI_REPORT_ERROR(("Bad Target Type (ARGI): %X\n",
-				   GET_CURRENT_ARG_TYPE(walk_state->op_info->
-							runtime_args)))
-		    status = AE_AML_INTERNAL;
+		ACPI_ERROR((AE_INFO,
+			    "Unknown Target type ID 0x%X aml_opcode %X dest_type %s",
+			    GET_CURRENT_ARG_TYPE(walk_state->op_info->
+						 runtime_args),
+			    walk_state->opcode,
+			    acpi_ut_get_type_name(destination_type)));
+		status = AE_AML_INTERNAL;
 	}
 
 	/*

drivers/acpi/executer/excreate.c

@@ -5,7 +5,7 @@
  *****************************************************************************/
 
 /*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -300,8 +300,8 @@ acpi_ex_create_region(u8 * aml_start,
 	 */
 	if ((region_space >= ACPI_NUM_PREDEFINED_REGIONS) &&
 	    (region_space < ACPI_USER_REGION_BEGIN)) {
-		ACPI_REPORT_ERROR(("Invalid address_space type %X\n",
-				   region_space));
+		ACPI_ERROR((AE_INFO, "Invalid address_space type %X",
+			    region_space));
 		return_ACPI_STATUS(AE_AML_INVALID_SPACE_ID);
 	}
 

drivers/acpi/executer/exdump.c

@@ -5,7 +5,7 @@
  *****************************************************************************/
 
 /*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -55,20 +55,386 @@ ACPI_MODULE_NAME("exdump")
  */
 #if defined(ACPI_DEBUG_OUTPUT) || defined(ACPI_DEBUGGER)
 /* Local prototypes */
-#ifdef ACPI_FUTURE_USAGE
 static void acpi_ex_out_string(char *title, char *value);
 
 static void acpi_ex_out_pointer(char *title, void *value);
 
-static void acpi_ex_out_integer(char *title, u32 value);
-
 static void acpi_ex_out_address(char *title, acpi_physical_address value);
 
-static void acpi_ex_dump_reference(union acpi_operand_object *obj_desc);
+static void acpi_ex_dump_reference_obj(union acpi_operand_object *obj_desc);
 
 static void
-acpi_ex_dump_package(union acpi_operand_object *obj_desc, u32 level, u32 index);
-#endif				/* ACPI_FUTURE_USAGE */
+acpi_ex_dump_package_obj(union acpi_operand_object *obj_desc,
+			 u32 level, u32 index);
+
+/*******************************************************************************
+ *
+ * Object Descriptor info tables
+ *
+ * Note: The first table entry must be an INIT opcode and must contain
+ * the table length (number of table entries)
+ *
+ ******************************************************************************/
+
+static struct acpi_exdump_info acpi_ex_dump_integer[2] = {
+	{ACPI_EXD_INIT, ACPI_EXD_TABLE_SIZE(acpi_ex_dump_integer), NULL},
+	{ACPI_EXD_UINT64, ACPI_EXD_OFFSET(integer.value), "Value"}
+};
+
+static struct acpi_exdump_info acpi_ex_dump_string[4] = {
+	{ACPI_EXD_INIT, ACPI_EXD_TABLE_SIZE(acpi_ex_dump_string), NULL},
+	{ACPI_EXD_UINT32, ACPI_EXD_OFFSET(string.length), "Length"},
+	{ACPI_EXD_POINTER, ACPI_EXD_OFFSET(string.pointer), "Pointer"},
+	{ACPI_EXD_STRING, 0, NULL}
+};
+
+static struct acpi_exdump_info acpi_ex_dump_buffer[4] = {
+	{ACPI_EXD_INIT, ACPI_EXD_TABLE_SIZE(acpi_ex_dump_buffer), NULL},
+	{ACPI_EXD_UINT32, ACPI_EXD_OFFSET(buffer.length), "Length"},
+	{ACPI_EXD_POINTER, ACPI_EXD_OFFSET(buffer.pointer), "Pointer"},
+	{ACPI_EXD_BUFFER, 0, NULL}
+};
+
+static struct acpi_exdump_info acpi_ex_dump_package[5] = {
+	{ACPI_EXD_INIT, ACPI_EXD_TABLE_SIZE(acpi_ex_dump_package), NULL},
+	{ACPI_EXD_UINT8, ACPI_EXD_OFFSET(package.flags), "Flags"},
+	{ACPI_EXD_UINT32, ACPI_EXD_OFFSET(package.count), "Elements"},
+	{ACPI_EXD_POINTER, ACPI_EXD_OFFSET(package.elements), "Element List"},
+	{ACPI_EXD_PACKAGE, 0, NULL}
+};
+
+static struct acpi_exdump_info acpi_ex_dump_device[4] = {
+	{ACPI_EXD_INIT, ACPI_EXD_TABLE_SIZE(acpi_ex_dump_device), NULL},
+	{ACPI_EXD_POINTER, ACPI_EXD_OFFSET(device.handler), "Handler"},
+	{ACPI_EXD_POINTER, ACPI_EXD_OFFSET(device.system_notify),
+	 "System Notify"},
+	{ACPI_EXD_POINTER, ACPI_EXD_OFFSET(device.device_notify),
+	 "Device Notify"}
+};
+
+static struct acpi_exdump_info acpi_ex_dump_event[2] = {
+	{ACPI_EXD_INIT, ACPI_EXD_TABLE_SIZE(acpi_ex_dump_event), NULL},
+	{ACPI_EXD_POINTER, ACPI_EXD_OFFSET(event.semaphore), "Semaphore"}
+};
+
+static struct acpi_exdump_info acpi_ex_dump_method[8] = {
+	{ACPI_EXD_INIT, ACPI_EXD_TABLE_SIZE(acpi_ex_dump_method), NULL},
+	{ACPI_EXD_UINT8, ACPI_EXD_OFFSET(method.param_count), "param_count"},
+	{ACPI_EXD_UINT8, ACPI_EXD_OFFSET(method.concurrency), "Concurrency"},
+	{ACPI_EXD_POINTER, ACPI_EXD_OFFSET(method.semaphore), "Semaphore"},
+	{ACPI_EXD_UINT8, ACPI_EXD_OFFSET(method.owner_id), "Owner Id"},
+	{ACPI_EXD_UINT8, ACPI_EXD_OFFSET(method.thread_count), "Thread Count"},
+	{ACPI_EXD_UINT32, ACPI_EXD_OFFSET(method.aml_length), "Aml Length"},
+	{ACPI_EXD_POINTER, ACPI_EXD_OFFSET(method.aml_start), "Aml Start"}
+};
+
+static struct acpi_exdump_info acpi_ex_dump_mutex[5] = {
+	{ACPI_EXD_INIT, ACPI_EXD_TABLE_SIZE(acpi_ex_dump_mutex), NULL},
+	{ACPI_EXD_UINT8, ACPI_EXD_OFFSET(mutex.sync_level), "Sync Level"},
+	{ACPI_EXD_POINTER, ACPI_EXD_OFFSET(mutex.owner_thread), "Owner Thread"},
+	{ACPI_EXD_UINT16, ACPI_EXD_OFFSET(mutex.acquisition_depth),
+	 "Acquire Depth"},
+	{ACPI_EXD_POINTER, ACPI_EXD_OFFSET(mutex.semaphore), "Semaphore"}
+};
+
+static struct acpi_exdump_info acpi_ex_dump_region[7] = {
+	{ACPI_EXD_INIT, ACPI_EXD_TABLE_SIZE(acpi_ex_dump_region), NULL},
+	{ACPI_EXD_UINT8, ACPI_EXD_OFFSET(region.space_id), "Space Id"},
+	{ACPI_EXD_UINT8, ACPI_EXD_OFFSET(region.flags), "Flags"},
+	{ACPI_EXD_ADDRESS, ACPI_EXD_OFFSET(region.address), "Address"},
+	{ACPI_EXD_UINT32, ACPI_EXD_OFFSET(region.length), "Length"},
+	{ACPI_EXD_POINTER, ACPI_EXD_OFFSET(region.handler), "Handler"},
+	{ACPI_EXD_POINTER, ACPI_EXD_OFFSET(region.next), "Next"}
+};
+
+static struct acpi_exdump_info acpi_ex_dump_power[5] = {
+	{ACPI_EXD_INIT, ACPI_EXD_TABLE_SIZE(acpi_ex_dump_power), NULL},
+	{ACPI_EXD_UINT32, ACPI_EXD_OFFSET(power_resource.system_level),
+	 "System Level"},
+	{ACPI_EXD_UINT32, ACPI_EXD_OFFSET(power_resource.resource_order),
+	 "Resource Order"},
+	{ACPI_EXD_POINTER, ACPI_EXD_OFFSET(power_resource.system_notify),
+	 "System Notify"},
+	{ACPI_EXD_POINTER, ACPI_EXD_OFFSET(power_resource.device_notify),
+	 "Device Notify"}
+};
+
+static struct acpi_exdump_info acpi_ex_dump_processor[7] = {
+	{ACPI_EXD_INIT, ACPI_EXD_TABLE_SIZE(acpi_ex_dump_processor), NULL},
+	{ACPI_EXD_UINT32, ACPI_EXD_OFFSET(processor.proc_id), "Processor ID"},
+	{ACPI_EXD_UINT32, ACPI_EXD_OFFSET(processor.length), "Length"},
+	{ACPI_EXD_ADDRESS, ACPI_EXD_OFFSET(processor.address), "Address"},
+	{ACPI_EXD_POINTER, ACPI_EXD_OFFSET(processor.system_notify),
+	 "System Notify"},
+	{ACPI_EXD_POINTER, ACPI_EXD_OFFSET(processor.device_notify),
+	 "Device Notify"},
+	{ACPI_EXD_POINTER, ACPI_EXD_OFFSET(processor.handler), "Handler"}
+};
+
+static struct acpi_exdump_info acpi_ex_dump_thermal[4] = {
+	{ACPI_EXD_INIT, ACPI_EXD_TABLE_SIZE(acpi_ex_dump_thermal), NULL},
+	{ACPI_EXD_POINTER, ACPI_EXD_OFFSET(thermal_zone.system_notify),
+	 "System Notify"},
+	{ACPI_EXD_POINTER, ACPI_EXD_OFFSET(thermal_zone.device_notify),
+	 "Device Notify"},
+	{ACPI_EXD_POINTER, ACPI_EXD_OFFSET(thermal_zone.handler), "Handler"}
+};
+
+static struct acpi_exdump_info acpi_ex_dump_buffer_field[3] = {
+	{ACPI_EXD_INIT, ACPI_EXD_TABLE_SIZE(acpi_ex_dump_buffer_field), NULL},
+	{ACPI_EXD_FIELD, 0, NULL},
+	{ACPI_EXD_POINTER, ACPI_EXD_OFFSET(buffer_field.buffer_obj),
+	 "Buffer Object"}
+};
+
+static struct acpi_exdump_info acpi_ex_dump_region_field[3] = {
+	{ACPI_EXD_INIT, ACPI_EXD_TABLE_SIZE(acpi_ex_dump_region_field), NULL},
+	{ACPI_EXD_FIELD, 0, NULL},
+	{ACPI_EXD_POINTER, ACPI_EXD_OFFSET(field.region_obj), "Region Object"}
+};
+
+static struct acpi_exdump_info acpi_ex_dump_bank_field[5] = {
+	{ACPI_EXD_INIT, ACPI_EXD_TABLE_SIZE(acpi_ex_dump_bank_field), NULL},
+	{ACPI_EXD_FIELD, 0, NULL},
+	{ACPI_EXD_UINT32, ACPI_EXD_OFFSET(bank_field.value), "Value"},
+	{ACPI_EXD_POINTER, ACPI_EXD_OFFSET(bank_field.region_obj),
+	 "Region Object"},
+	{ACPI_EXD_POINTER, ACPI_EXD_OFFSET(bank_field.bank_obj), "Bank Object"}
+};
+
+static struct acpi_exdump_info acpi_ex_dump_index_field[5] = {
+	{ACPI_EXD_INIT, ACPI_EXD_TABLE_SIZE(acpi_ex_dump_bank_field), NULL},
+	{ACPI_EXD_FIELD, 0, NULL},
+	{ACPI_EXD_UINT32, ACPI_EXD_OFFSET(index_field.value), "Value"},
+	{ACPI_EXD_POINTER, ACPI_EXD_OFFSET(index_field.index_obj),
+	 "Index Object"},
+	{ACPI_EXD_POINTER, ACPI_EXD_OFFSET(index_field.data_obj), "Data Object"}
+};
+
+static struct acpi_exdump_info acpi_ex_dump_reference[7] = {
+	{ACPI_EXD_INIT, ACPI_EXD_TABLE_SIZE(acpi_ex_dump_reference), NULL},
+	{ACPI_EXD_UINT8, ACPI_EXD_OFFSET(reference.target_type), "Target Type"},
+	{ACPI_EXD_UINT32, ACPI_EXD_OFFSET(reference.offset), "Offset"},
+	{ACPI_EXD_POINTER, ACPI_EXD_OFFSET(reference.object), "Object Desc"},
+	{ACPI_EXD_POINTER, ACPI_EXD_OFFSET(reference.node), "Node"},
+	{ACPI_EXD_POINTER, ACPI_EXD_OFFSET(reference.where), "Where"},
+	{ACPI_EXD_REFERENCE, 0, NULL}
+};
+
+static struct acpi_exdump_info acpi_ex_dump_address_handler[6] = {
+	{ACPI_EXD_INIT, ACPI_EXD_TABLE_SIZE(acpi_ex_dump_address_handler),
+	 NULL},
+	{ACPI_EXD_UINT8, ACPI_EXD_OFFSET(address_space.space_id), "Space Id"},
+	{ACPI_EXD_POINTER, ACPI_EXD_OFFSET(address_space.next), "Next"},
+	{ACPI_EXD_POINTER, ACPI_EXD_OFFSET(address_space.region_list),
+	 "Region List"},
+	{ACPI_EXD_POINTER, ACPI_EXD_OFFSET(address_space.node), "Node"},
+	{ACPI_EXD_POINTER, ACPI_EXD_OFFSET(address_space.context), "Context"}
+};
+
+static struct acpi_exdump_info acpi_ex_dump_notify[3] = {
+	{ACPI_EXD_INIT, ACPI_EXD_TABLE_SIZE(acpi_ex_dump_notify), NULL},
+	{ACPI_EXD_POINTER, ACPI_EXD_OFFSET(notify.node), "Node"},
+	{ACPI_EXD_POINTER, ACPI_EXD_OFFSET(notify.context), "Context"}
+};
+
+/* Miscellaneous tables */
+
+static struct acpi_exdump_info acpi_ex_dump_common[4] = {
+	{ACPI_EXD_INIT, ACPI_EXD_TABLE_SIZE(acpi_ex_dump_common), NULL},
+	{ACPI_EXD_TYPE, 0, NULL},
+	{ACPI_EXD_UINT16, ACPI_EXD_OFFSET(common.reference_count),
+	 "Reference Count"},
+	{ACPI_EXD_UINT8, ACPI_EXD_OFFSET(common.flags), "Flags"}
+};
+
+static struct acpi_exdump_info acpi_ex_dump_field_common[7] = {
+	{ACPI_EXD_INIT, ACPI_EXD_TABLE_SIZE(acpi_ex_dump_field_common), NULL},
+	{ACPI_EXD_UINT8, ACPI_EXD_OFFSET(common_field.field_flags),
+	 "Field Flags"},
+	{ACPI_EXD_UINT8, ACPI_EXD_OFFSET(common_field.access_byte_width),
+	 "Access Byte Width"},
+	{ACPI_EXD_UINT32, ACPI_EXD_OFFSET(common_field.bit_length),
+	 "Bit Length"},
+	{ACPI_EXD_UINT8, ACPI_EXD_OFFSET(common_field.start_field_bit_offset),
+	 "Field Bit Offset"},
+	{ACPI_EXD_UINT32, ACPI_EXD_OFFSET(common_field.base_byte_offset),
+	 "Base Byte Offset"},
+	{ACPI_EXD_POINTER, ACPI_EXD_OFFSET(common_field.node), "Parent Node"}
+};
+
+static struct acpi_exdump_info acpi_ex_dump_node[6] = {
+	{ACPI_EXD_INIT, ACPI_EXD_TABLE_SIZE(acpi_ex_dump_node), NULL},
+	{ACPI_EXD_UINT8, ACPI_EXD_NSOFFSET(flags), "Flags"},
+	{ACPI_EXD_UINT8, ACPI_EXD_NSOFFSET(owner_id), "Owner Id"},
+	{ACPI_EXD_UINT16, ACPI_EXD_NSOFFSET(reference_count),
+	 "Reference Count"},
+	{ACPI_EXD_POINTER, ACPI_EXD_NSOFFSET(child), "Child List"},
+	{ACPI_EXD_POINTER, ACPI_EXD_NSOFFSET(peer), "Next Peer"}
+};
+
+/* Dispatch table, indexed by object type */
+
+static struct acpi_exdump_info *acpi_ex_dump_info[] = {
+	NULL,
+	acpi_ex_dump_integer,
+	acpi_ex_dump_string,
+	acpi_ex_dump_buffer,
+	acpi_ex_dump_package,
+	NULL,
+	acpi_ex_dump_device,
+	acpi_ex_dump_event,
+	acpi_ex_dump_method,
+	acpi_ex_dump_mutex,
+	acpi_ex_dump_region,
+	acpi_ex_dump_power,
+	acpi_ex_dump_processor,
+	acpi_ex_dump_thermal,
+	acpi_ex_dump_buffer_field,
+	NULL,
+	NULL,
+	acpi_ex_dump_region_field,
+	acpi_ex_dump_bank_field,
+	acpi_ex_dump_index_field,
+	acpi_ex_dump_reference,
+	NULL,
+	NULL,
+	acpi_ex_dump_notify,
+	acpi_ex_dump_address_handler,
+	NULL,
+	NULL,
+	NULL
+};
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ex_dump_object
+ *
+ * PARAMETERS:  obj_desc            - Descriptor to dump
+ *              Info                - Info table corresponding to this object
+ *                                    type
+ *
+ * RETURN:      None
+ *
+ * DESCRIPTION: Walk the info table for this object
+ *
+ ******************************************************************************/
+
+static void
+acpi_ex_dump_object(union acpi_operand_object *obj_desc,
+		    struct acpi_exdump_info *info)
+{
+	u8 *target;
+	char *name;
+	u8 count;
+
+	if (!info) {
+		acpi_os_printf
+		    ("ex_dump_object: Display not implemented for object type %s\n",
+		     acpi_ut_get_object_type_name(obj_desc));
+		return;
+	}
+
+	/* First table entry must contain the table length (# of table entries) */
+
+	count = info->offset;
+
+	while (count) {
+		target = ACPI_ADD_PTR(u8, obj_desc, info->offset);
+		name = info->name;
+
+		switch (info->opcode) {
+		case ACPI_EXD_INIT:
+			break;
+
+		case ACPI_EXD_TYPE:
+			acpi_ex_out_string("Type",
+					   acpi_ut_get_object_type_name
+					   (obj_desc));
+			break;
+
+		case ACPI_EXD_UINT8:
+
+			acpi_os_printf("%20s : %2.2X\n", name, *target);
+			break;
+
+		case ACPI_EXD_UINT16:
+
+			acpi_os_printf("%20s : %4.4X\n", name,
+				       ACPI_GET16(target));
+			break;
+
+		case ACPI_EXD_UINT32:
+
+			acpi_os_printf("%20s : %8.8X\n", name,
+				       ACPI_GET32(target));
+			break;
+
+		case ACPI_EXD_UINT64:
+
+			acpi_os_printf("%20s : %8.8X%8.8X\n", "Value",
+				       ACPI_FORMAT_UINT64(ACPI_GET64(target)));
+			break;
+
+		case ACPI_EXD_POINTER:
+
+			acpi_ex_out_pointer(name,
+					    *ACPI_CAST_PTR(void *, target));
+			break;
+
+		case ACPI_EXD_ADDRESS:
+
+			acpi_ex_out_address(name,
+					    *ACPI_CAST_PTR
+					    (acpi_physical_address, target));
+			break;
+
+		case ACPI_EXD_STRING:
+
+			acpi_ut_print_string(obj_desc->string.pointer,
+					     ACPI_UINT8_MAX);
+			acpi_os_printf("\n");
+			break;
+
+		case ACPI_EXD_BUFFER:
+
+			ACPI_DUMP_BUFFER(obj_desc->buffer.pointer,
+					 obj_desc->buffer.length);
+			break;
+
+		case ACPI_EXD_PACKAGE:
+
+			/* Dump the package contents */
+
+			acpi_os_printf("\nPackage Contents:\n");
+			acpi_ex_dump_package_obj(obj_desc, 0, 0);
+			break;
+
+		case ACPI_EXD_FIELD:
+
+			acpi_ex_dump_object(obj_desc,
+					    acpi_ex_dump_field_common);
+			break;
+
+		case ACPI_EXD_REFERENCE:
+
+			acpi_ex_out_string("Opcode",
+					   (acpi_ps_get_opcode_info
+					    (obj_desc->reference.opcode))->
+					   name);
+			acpi_ex_dump_reference_obj(obj_desc);
+			break;
+
+		default:
+			acpi_os_printf("**** Invalid table opcode [%X] ****\n",
+				       info->opcode);
+			return;
+		}
+
+		info++;
+		count--;
+	}
+}
 
 /*******************************************************************************
  *
@@ -214,7 +580,7 @@ void acpi_ex_dump_operand(union acpi_operand_object *obj_desc, u32 depth)
 
 	case ACPI_TYPE_BUFFER:
 
-		acpi_os_printf("Buffer len %X @ %p \n",
+		acpi_os_printf("Buffer len %X @ %p\n",
 			       obj_desc->buffer.length,
 			       obj_desc->buffer.pointer);
 
@@ -320,17 +686,17 @@ void acpi_ex_dump_operand(union acpi_operand_object *obj_desc, u32 depth)
 
 	case ACPI_TYPE_BUFFER_FIELD:
 
-		acpi_os_printf("buffer_field: %X bits at byte %X bit %X of \n",
+		acpi_os_printf("buffer_field: %X bits at byte %X bit %X of\n",
 			       obj_desc->buffer_field.bit_length,
 			       obj_desc->buffer_field.base_byte_offset,
 			       obj_desc->buffer_field.start_field_bit_offset);
 
 		if (!obj_desc->buffer_field.buffer_obj) {
-			ACPI_DEBUG_PRINT((ACPI_DB_EXEC, "*NULL* \n"));
+			ACPI_DEBUG_PRINT((ACPI_DB_EXEC, "*NULL*\n"));
 		} else
 		    if (ACPI_GET_OBJECT_TYPE(obj_desc->buffer_field.buffer_obj)
 			!= ACPI_TYPE_BUFFER) {
-			acpi_os_printf("*not a Buffer* \n");
+			acpi_os_printf("*not a Buffer*\n");
 		} else {
 			acpi_ex_dump_operand(obj_desc->buffer_field.buffer_obj,
 					     depth + 1);
@@ -441,7 +807,6 @@ acpi_ex_dump_operands(union acpi_operand_object **operands,
 	return;
 }
 
-#ifdef ACPI_FUTURE_USAGE
 /*******************************************************************************
  *
  * FUNCTION:    acpi_ex_out* functions
@@ -465,11 +830,6 @@ static void acpi_ex_out_pointer(char *title, void *value)
 	acpi_os_printf("%20s : %p\n", title, value);
 }
 
-static void acpi_ex_out_integer(char *title, u32 value)
-{
-	acpi_os_printf("%20s : %.2X\n", title, value);
-}
-
 static void acpi_ex_out_address(char *title, acpi_physical_address value)
 {
 
@@ -482,16 +842,16 @@ static void acpi_ex_out_address(char *title, acpi_physical_address value)
 
 /*******************************************************************************
  *
- * FUNCTION:    acpi_ex_dump_node
+ * FUNCTION:    acpi_ex_dump_namespace_node
  *
- * PARAMETERS:  *Node               - Descriptor to dump
+ * PARAMETERS:  Node                - Descriptor to dump
  *              Flags               - Force display if TRUE
  *
  * DESCRIPTION: Dumps the members of the given.Node
  *
  ******************************************************************************/
 
-void acpi_ex_dump_node(struct acpi_namespace_node *node, u32 flags)
+void acpi_ex_dump_namespace_node(struct acpi_namespace_node *node, u32 flags)
 {
 
 	ACPI_FUNCTION_ENTRY();
@@ -506,19 +866,17 @@ void acpi_ex_dump_node(struct acpi_namespace_node *node, u32 flags)
 
 	acpi_os_printf("%20s : %4.4s\n", "Name", acpi_ut_get_node_name(node));
 	acpi_ex_out_string("Type", acpi_ut_get_type_name(node->type));
-	acpi_ex_out_integer("Flags", node->flags);
-	acpi_ex_out_integer("Owner Id", node->owner_id);
-	acpi_ex_out_integer("Reference Count", node->reference_count);
 	acpi_ex_out_pointer("Attached Object",
 			    acpi_ns_get_attached_object(node));
-	acpi_ex_out_pointer("child_list", node->child);
-	acpi_ex_out_pointer("next_peer", node->peer);
 	acpi_ex_out_pointer("Parent", acpi_ns_get_parent_node(node));
+
+	acpi_ex_dump_object(ACPI_CAST_PTR(union acpi_operand_object, node),
+			    acpi_ex_dump_node);
 }
 
 /*******************************************************************************
  *
- * FUNCTION:    acpi_ex_dump_reference
+ * FUNCTION:    acpi_ex_dump_reference_obj
  *
  * PARAMETERS:  Object              - Descriptor to dump
  *
@@ -526,14 +884,16 @@ void acpi_ex_dump_node(struct acpi_namespace_node *node, u32 flags)
  *
  ******************************************************************************/
 
-static void acpi_ex_dump_reference(union acpi_operand_object *obj_desc)
+static void acpi_ex_dump_reference_obj(union acpi_operand_object *obj_desc)
 {
 	struct acpi_buffer ret_buf;
 	acpi_status status;
 
+	ret_buf.length = ACPI_ALLOCATE_LOCAL_BUFFER;
+
 	if (obj_desc->reference.opcode == AML_INT_NAMEPATH_OP) {
 		acpi_os_printf("Named Object %p ", obj_desc->reference.node);
-		ret_buf.length = ACPI_ALLOCATE_LOCAL_BUFFER;
+
 		status =
 		    acpi_ns_handle_to_pathname(obj_desc->reference.node,
 					       &ret_buf);
@@ -551,9 +911,9 @@ static void acpi_ex_dump_reference(union acpi_operand_object *obj_desc)
 
 /*******************************************************************************
  *
- * FUNCTION:    acpi_ex_dump_package
+ * FUNCTION:    acpi_ex_dump_package_obj
  *
- * PARAMETERS:  Object              - Descriptor to dump
+ * PARAMETERS:  obj_desc            - Descriptor to dump
  *              Level               - Indentation Level
  *              Index               - Package index for this object
  *
@@ -562,7 +922,8 @@ static void acpi_ex_dump_reference(union acpi_operand_object *obj_desc)
  ******************************************************************************/
 
 static void
-acpi_ex_dump_package(union acpi_operand_object *obj_desc, u32 level, u32 index)
+acpi_ex_dump_package_obj(union acpi_operand_object *obj_desc,
+			 u32 level, u32 index)
 {
 	u32 i;
 
@@ -608,7 +969,8 @@ acpi_ex_dump_package(union acpi_operand_object *obj_desc, u32 level, u32 index)
 		acpi_os_printf("[Buffer] Length %.2X = ",
 			       obj_desc->buffer.length);
 		if (obj_desc->buffer.length) {
-			acpi_ut_dump_buffer((u8 *) obj_desc->buffer.pointer,
+			acpi_ut_dump_buffer(ACPI_CAST_PTR
+					    (u8, obj_desc->buffer.pointer),
 					    obj_desc->buffer.length,
 					    DB_DWORD_DISPLAY, _COMPONENT);
 		} else {
@@ -618,19 +980,19 @@ acpi_ex_dump_package(union acpi_operand_object *obj_desc, u32 level, u32 index)
 
 	case ACPI_TYPE_PACKAGE:
 
-		acpi_os_printf("[Package] Contains %d Elements: \n",
+		acpi_os_printf("[Package] Contains %d Elements:\n",
 			       obj_desc->package.count);
 
 		for (i = 0; i < obj_desc->package.count; i++) {
-			acpi_ex_dump_package(obj_desc->package.elements[i],
-					     level + 1, i);
+			acpi_ex_dump_package_obj(obj_desc->package.elements[i],
+						 level + 1, i);
 		}
 		break;
 
 	case ACPI_TYPE_LOCAL_REFERENCE:
 
 		acpi_os_printf("[Object Reference] ");
-		acpi_ex_dump_reference(obj_desc);
+		acpi_ex_dump_reference_obj(obj_desc);
 		break;
 
 	default:
@@ -645,7 +1007,7 @@ acpi_ex_dump_package(union acpi_operand_object *obj_desc, u32 level, u32 index)
  *
  * FUNCTION:    acpi_ex_dump_object_descriptor
  *
- * PARAMETERS:  Object              - Descriptor to dump
+ * PARAMETERS:  obj_desc            - Descriptor to dump
  *              Flags               - Force display if TRUE
  *
  * DESCRIPTION: Dumps the members of the object descriptor given.
@@ -670,11 +1032,13 @@ acpi_ex_dump_object_descriptor(union acpi_operand_object *obj_desc, u32 flags)
 	}
 
 	if (ACPI_GET_DESCRIPTOR_TYPE(obj_desc) == ACPI_DESC_TYPE_NAMED) {
-		acpi_ex_dump_node((struct acpi_namespace_node *)obj_desc,
-				  flags);
+		acpi_ex_dump_namespace_node((struct acpi_namespace_node *)
+					    obj_desc, flags);
+
 		acpi_os_printf("\nAttached Object (%p):\n",
 			       ((struct acpi_namespace_node *)obj_desc)->
 			       object);
+
 		acpi_ex_dump_object_descriptor(((struct acpi_namespace_node *)
 						obj_desc)->object, flags);
 		return_VOID;
@@ -687,233 +1051,18 @@ acpi_ex_dump_object_descriptor(union acpi_operand_object *obj_desc, u32 flags)
 		return_VOID;
 	}
 
-	/* Common Fields */
-
-	acpi_ex_out_string("Type", acpi_ut_get_object_type_name(obj_desc));
-	acpi_ex_out_integer("Reference Count",
-			    obj_desc->common.reference_count);
-	acpi_ex_out_integer("Flags", obj_desc->common.flags);
-
-	/* Object-specific Fields */
-
-	switch (ACPI_GET_OBJECT_TYPE(obj_desc)) {
-	case ACPI_TYPE_INTEGER:
-
-		acpi_os_printf("%20s : %8.8X%8.8X\n", "Value",
-			       ACPI_FORMAT_UINT64(obj_desc->integer.value));
-		break;
-
-	case ACPI_TYPE_STRING:
-
-		acpi_ex_out_integer("Length", obj_desc->string.length);
-
-		acpi_os_printf("%20s : %p ", "Pointer",
-			       obj_desc->string.pointer);
-		acpi_ut_print_string(obj_desc->string.pointer, ACPI_UINT8_MAX);
-		acpi_os_printf("\n");
-		break;
-
-	case ACPI_TYPE_BUFFER:
-
-		acpi_ex_out_integer("Length", obj_desc->buffer.length);
-		acpi_ex_out_pointer("Pointer", obj_desc->buffer.pointer);
-		ACPI_DUMP_BUFFER(obj_desc->buffer.pointer,
-				 obj_desc->buffer.length);
-		break;
-
-	case ACPI_TYPE_PACKAGE:
-
-		acpi_ex_out_integer("Flags", obj_desc->package.flags);
-		acpi_ex_out_integer("Elements", obj_desc->package.count);
-		acpi_ex_out_pointer("Element List", obj_desc->package.elements);
-
-		/* Dump the package contents */
-
-		acpi_os_printf("\nPackage Contents:\n");
-		acpi_ex_dump_package(obj_desc, 0, 0);
-		break;
-
-	case ACPI_TYPE_DEVICE:
-
-		acpi_ex_out_pointer("Handler", obj_desc->device.handler);
-		acpi_ex_out_pointer("system_notify",
-				    obj_desc->device.system_notify);
-		acpi_ex_out_pointer("device_notify",
-				    obj_desc->device.device_notify);
-		break;
-
-	case ACPI_TYPE_EVENT:
-
-		acpi_ex_out_pointer("Semaphore", obj_desc->event.semaphore);
-		break;
-
-	case ACPI_TYPE_METHOD:
-
-		acpi_ex_out_integer("param_count",
-				    obj_desc->method.param_count);
-		acpi_ex_out_integer("Concurrency",
-				    obj_desc->method.concurrency);
-		acpi_ex_out_pointer("Semaphore", obj_desc->method.semaphore);
-		acpi_ex_out_integer("owner_id", obj_desc->method.owner_id);
-		acpi_ex_out_integer("aml_length", obj_desc->method.aml_length);
-		acpi_ex_out_pointer("aml_start", obj_desc->method.aml_start);
-		break;
-
-	case ACPI_TYPE_MUTEX:
-
-		acpi_ex_out_integer("sync_level", obj_desc->mutex.sync_level);
-		acpi_ex_out_pointer("owner_thread",
-				    obj_desc->mutex.owner_thread);
-		acpi_ex_out_integer("acquire_depth",
-				    obj_desc->mutex.acquisition_depth);
-		acpi_ex_out_pointer("Semaphore", obj_desc->mutex.semaphore);
-		break;
-
-	case ACPI_TYPE_REGION:
-
-		acpi_ex_out_integer("space_id", obj_desc->region.space_id);
-		acpi_ex_out_integer("Flags", obj_desc->region.flags);
-		acpi_ex_out_address("Address", obj_desc->region.address);
-		acpi_ex_out_integer("Length", obj_desc->region.length);
-		acpi_ex_out_pointer("Handler", obj_desc->region.handler);
-		acpi_ex_out_pointer("Next", obj_desc->region.next);
-		break;
-
-	case ACPI_TYPE_POWER:
-
-		acpi_ex_out_integer("system_level",
-				    obj_desc->power_resource.system_level);
-		acpi_ex_out_integer("resource_order",
-				    obj_desc->power_resource.resource_order);
-		acpi_ex_out_pointer("system_notify",
-				    obj_desc->power_resource.system_notify);
-		acpi_ex_out_pointer("device_notify",
-				    obj_desc->power_resource.device_notify);
-		break;
-
-	case ACPI_TYPE_PROCESSOR:
-
-		acpi_ex_out_integer("Processor ID",
-				    obj_desc->processor.proc_id);
-		acpi_ex_out_integer("Length", obj_desc->processor.length);
-		acpi_ex_out_address("Address",
-				    (acpi_physical_address) obj_desc->processor.
-				    address);
-		acpi_ex_out_pointer("system_notify",
-				    obj_desc->processor.system_notify);
-		acpi_ex_out_pointer("device_notify",
-				    obj_desc->processor.device_notify);
-		acpi_ex_out_pointer("Handler", obj_desc->processor.handler);
-		break;
-
-	case ACPI_TYPE_THERMAL:
-
-		acpi_ex_out_pointer("system_notify",
-				    obj_desc->thermal_zone.system_notify);
-		acpi_ex_out_pointer("device_notify",
-				    obj_desc->thermal_zone.device_notify);
-		acpi_ex_out_pointer("Handler", obj_desc->thermal_zone.handler);
-		break;
-
-	case ACPI_TYPE_BUFFER_FIELD:
-	case ACPI_TYPE_LOCAL_REGION_FIELD:
-	case ACPI_TYPE_LOCAL_BANK_FIELD:
-	case ACPI_TYPE_LOCAL_INDEX_FIELD:
-
-		acpi_ex_out_integer("field_flags",
-				    obj_desc->common_field.field_flags);
-		acpi_ex_out_integer("access_byte_width",
-				    obj_desc->common_field.access_byte_width);
-		acpi_ex_out_integer("bit_length",
-				    obj_desc->common_field.bit_length);
-		acpi_ex_out_integer("fld_bit_offset",
-				    obj_desc->common_field.
-				    start_field_bit_offset);
-		acpi_ex_out_integer("base_byte_offset",
-				    obj_desc->common_field.base_byte_offset);
-		acpi_ex_out_pointer("parent_node", obj_desc->common_field.node);
-
-		switch (ACPI_GET_OBJECT_TYPE(obj_desc)) {
-		case ACPI_TYPE_BUFFER_FIELD:
-			acpi_ex_out_pointer("buffer_obj",
-					    obj_desc->buffer_field.buffer_obj);
-			break;
-
-		case ACPI_TYPE_LOCAL_REGION_FIELD:
-			acpi_ex_out_pointer("region_obj",
-					    obj_desc->field.region_obj);
-			break;
-
-		case ACPI_TYPE_LOCAL_BANK_FIELD:
-			acpi_ex_out_integer("Value",
-					    obj_desc->bank_field.value);
-			acpi_ex_out_pointer("region_obj",
-					    obj_desc->bank_field.region_obj);
-			acpi_ex_out_pointer("bank_obj",
-					    obj_desc->bank_field.bank_obj);
-			break;
-
-		case ACPI_TYPE_LOCAL_INDEX_FIELD:
-			acpi_ex_out_integer("Value",
-					    obj_desc->index_field.value);
-			acpi_ex_out_pointer("Index",
-					    obj_desc->index_field.index_obj);
-			acpi_ex_out_pointer("Data",
-					    obj_desc->index_field.data_obj);
-			break;
-
-		default:
-			/* All object types covered above */
-			break;
-		}
-		break;
-
-	case ACPI_TYPE_LOCAL_REFERENCE:
-
-		acpi_ex_out_integer("target_type",
-				    obj_desc->reference.target_type);
-		acpi_ex_out_string("Opcode",
-				   (acpi_ps_get_opcode_info
-				    (obj_desc->reference.opcode))->name);
-		acpi_ex_out_integer("Offset", obj_desc->reference.offset);
-		acpi_ex_out_pointer("obj_desc", obj_desc->reference.object);
-		acpi_ex_out_pointer("Node", obj_desc->reference.node);
-		acpi_ex_out_pointer("Where", obj_desc->reference.where);
-
-		acpi_ex_dump_reference(obj_desc);
-		break;
-
-	case ACPI_TYPE_LOCAL_ADDRESS_HANDLER:
-
-		acpi_ex_out_integer("space_id",
-				    obj_desc->address_space.space_id);
-		acpi_ex_out_pointer("Next", obj_desc->address_space.next);
-		acpi_ex_out_pointer("region_list",
-				    obj_desc->address_space.region_list);
-		acpi_ex_out_pointer("Node", obj_desc->address_space.node);
-		acpi_ex_out_pointer("Context", obj_desc->address_space.context);
-		break;
+	if (obj_desc->common.type > ACPI_TYPE_NS_NODE_MAX) {
+		return_VOID;
+	}
 
-	case ACPI_TYPE_LOCAL_NOTIFY:
+	/* Common Fields */
 
-		acpi_ex_out_pointer("Node", obj_desc->notify.node);
-		acpi_ex_out_pointer("Context", obj_desc->notify.context);
-		break;
+	acpi_ex_dump_object(obj_desc, acpi_ex_dump_common);
 
-	case ACPI_TYPE_LOCAL_ALIAS:
-	case ACPI_TYPE_LOCAL_METHOD_ALIAS:
-	case ACPI_TYPE_LOCAL_EXTRA:
-	case ACPI_TYPE_LOCAL_DATA:
-	default:
-
-		acpi_os_printf
-		    ("ex_dump_object_descriptor: Display not implemented for object type %s\n",
-		     acpi_ut_get_object_type_name(obj_desc));
-		break;
-	}
+	/* Object-specific fields */
 
+	acpi_ex_dump_object(obj_desc, acpi_ex_dump_info[obj_desc->common.type]);
 	return_VOID;
 }
 
-#endif				/*  ACPI_FUTURE_USAGE  */
 #endif

drivers/acpi/executer/exfield.c

@@ -5,7 +5,7 @@
  *****************************************************************************/
 
 /*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -249,13 +249,18 @@ acpi_ex_write_data_to_field(union acpi_operand_object *source_desc,
 		 * Source must be a buffer of sufficient size (ACPI_SMBUS_BUFFER_SIZE).
 		 */
 		if (ACPI_GET_OBJECT_TYPE(source_desc) != ACPI_TYPE_BUFFER) {
-			ACPI_REPORT_ERROR(("SMBus write requires Buffer, found type %s\n", acpi_ut_get_object_type_name(source_desc)));
+			ACPI_ERROR((AE_INFO,
+				    "SMBus write requires Buffer, found type %s",
+				    acpi_ut_get_object_type_name(source_desc)));
 
 			return_ACPI_STATUS(AE_AML_OPERAND_TYPE);
 		}
 
 		if (source_desc->buffer.length < ACPI_SMBUS_BUFFER_SIZE) {
-			ACPI_REPORT_ERROR(("SMBus write requires Buffer of length %X, found length %X\n", ACPI_SMBUS_BUFFER_SIZE, source_desc->buffer.length));
+			ACPI_ERROR((AE_INFO,
+				    "SMBus write requires Buffer of length %X, found length %X",
+				    ACPI_SMBUS_BUFFER_SIZE,
+				    source_desc->buffer.length));
 
 			return_ACPI_STATUS(AE_AML_BUFFER_LIMIT);
 		}

drivers/acpi/executer/exfldio.c

@@ -5,7 +5,7 @@
  *****************************************************************************/
 
 /*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -94,10 +94,9 @@ acpi_ex_setup_region(union acpi_operand_object *obj_desc,
 	/* We must have a valid region */
 
 	if (ACPI_GET_OBJECT_TYPE(rgn_desc) != ACPI_TYPE_REGION) {
-		ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-				  "Needed Region, found type %X (%s)\n",
-				  ACPI_GET_OBJECT_TYPE(rgn_desc),
-				  acpi_ut_get_object_type_name(rgn_desc)));
+		ACPI_ERROR((AE_INFO, "Needed Region, found type %X (%s)",
+			    ACPI_GET_OBJECT_TYPE(rgn_desc),
+			    acpi_ut_get_object_type_name(rgn_desc)));
 
 		return_ACPI_STATUS(AE_AML_OPERAND_TYPE);
 	}
@@ -162,31 +161,28 @@ acpi_ex_setup_region(union acpi_operand_object *obj_desc,
 			 * than the region itself.  For example, a region of length one
 			 * byte, and a field with Dword access specified.
 			 */
-			ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-					  "Field [%4.4s] access width (%d bytes) too large for region [%4.4s] (length %X)\n",
-					  acpi_ut_get_node_name(obj_desc->
-								common_field.
-								node),
-					  obj_desc->common_field.
-					  access_byte_width,
-					  acpi_ut_get_node_name(rgn_desc->
-								region.node),
-					  rgn_desc->region.length));
+			ACPI_ERROR((AE_INFO,
+				    "Field [%4.4s] access width (%d bytes) too large for region [%4.4s] (length %X)",
+				    acpi_ut_get_node_name(obj_desc->
+							  common_field.node),
+				    obj_desc->common_field.access_byte_width,
+				    acpi_ut_get_node_name(rgn_desc->region.
+							  node),
+				    rgn_desc->region.length));
 		}
 
 		/*
 		 * Offset rounded up to next multiple of field width
 		 * exceeds region length, indicate an error
 		 */
-		ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-				  "Field [%4.4s] Base+Offset+Width %X+%X+%X is beyond end of region [%4.4s] (length %X)\n",
-				  acpi_ut_get_node_name(obj_desc->common_field.
-							node),
-				  obj_desc->common_field.base_byte_offset,
-				  field_datum_byte_offset,
-				  obj_desc->common_field.access_byte_width,
-				  acpi_ut_get_node_name(rgn_desc->region.node),
-				  rgn_desc->region.length));
+		ACPI_ERROR((AE_INFO,
+			    "Field [%4.4s] Base+Offset+Width %X+%X+%X is beyond end of region [%4.4s] (length %X)",
+			    acpi_ut_get_node_name(obj_desc->common_field.node),
+			    obj_desc->common_field.base_byte_offset,
+			    field_datum_byte_offset,
+			    obj_desc->common_field.access_byte_width,
+			    acpi_ut_get_node_name(rgn_desc->region.node),
+			    rgn_desc->region.length));
 
 		return_ACPI_STATUS(AE_AML_REGION_LIMIT);
 	}
@@ -270,18 +266,17 @@ acpi_ex_access_region(union acpi_operand_object *obj_desc,
 
 	if (ACPI_FAILURE(status)) {
 		if (status == AE_NOT_IMPLEMENTED) {
-			ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-					  "Region %s(%X) not implemented\n",
-					  acpi_ut_get_region_name(rgn_desc->
-								  region.
-								  space_id),
-					  rgn_desc->region.space_id));
+			ACPI_ERROR((AE_INFO,
+				    "Region %s(%X) not implemented",
+				    acpi_ut_get_region_name(rgn_desc->region.
+							    space_id),
+				    rgn_desc->region.space_id));
 		} else if (status == AE_NOT_EXIST) {
-			ACPI_REPORT_ERROR(("Region %s(%X) has no handler\n",
-					   acpi_ut_get_region_name(rgn_desc->
-								   region.
-								   space_id),
-					   rgn_desc->region.space_id));
+			ACPI_ERROR((AE_INFO,
+				    "Region %s(%X) has no handler",
+				    acpi_ut_get_region_name(rgn_desc->region.
+							    space_id),
+				    rgn_desc->region.space_id));
 		}
 	}
 
@@ -514,8 +509,8 @@ acpi_ex_field_datum_io(union acpi_operand_object *obj_desc,
 
 	default:
 
-		ACPI_REPORT_ERROR(("Wrong object type in field I/O %X\n",
-				   ACPI_GET_OBJECT_TYPE(obj_desc)));
+		ACPI_ERROR((AE_INFO, "Wrong object type in field I/O %X",
+			    ACPI_GET_OBJECT_TYPE(obj_desc)));
 		status = AE_AML_INTERNAL;
 		break;
 	}
@@ -618,11 +613,11 @@ acpi_ex_write_with_update_rule(union acpi_operand_object *obj_desc,
 
 		default:
 
-			ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-					  "write_with_update_rule: Unknown update_rule setting: %X\n",
-					  (obj_desc->common_field.
-					   field_flags &
-					   AML_FIELD_UPDATE_RULE_MASK)));
+			ACPI_ERROR((AE_INFO,
+				    "Unknown update_rule value: %X",
+				    (obj_desc->common_field.
+				     field_flags &
+				     AML_FIELD_UPDATE_RULE_MASK)));
 			return_ACPI_STATUS(AE_AML_OPERAND_VALUE);
 		}
 	}
@@ -677,10 +672,9 @@ acpi_ex_extract_from_field(union acpi_operand_object *obj_desc,
 
 	if (buffer_length <
 	    ACPI_ROUND_BITS_UP_TO_BYTES(obj_desc->common_field.bit_length)) {
-		ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-				  "Field size %X (bits) is too large for buffer (%X)\n",
-				  obj_desc->common_field.bit_length,
-				  buffer_length));
+		ACPI_ERROR((AE_INFO,
+			    "Field size %X (bits) is too large for buffer (%X)",
+			    obj_desc->common_field.bit_length, buffer_length));
 
 		return_ACPI_STATUS(AE_BUFFER_OVERFLOW);
 	}
@@ -792,10 +786,9 @@ acpi_ex_insert_into_field(union acpi_operand_object *obj_desc,
 
 	if (buffer_length <
 	    ACPI_ROUND_BITS_UP_TO_BYTES(obj_desc->common_field.bit_length)) {
-		ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-				  "Field size %X (bits) is too large for buffer (%X)\n",
-				  obj_desc->common_field.bit_length,
-				  buffer_length));
+		ACPI_ERROR((AE_INFO,
+			    "Field size %X (bits) is too large for buffer (%X)",
+			    obj_desc->common_field.bit_length, buffer_length));
 
 		return_ACPI_STATUS(AE_BUFFER_OVERFLOW);
 	}

drivers/acpi/executer/exmisc.c

@@ -6,7 +6,7 @@
  *****************************************************************************/
 
 /*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -45,6 +45,7 @@
 #include <acpi/acpi.h>
 #include <acpi/acinterp.h>
 #include <acpi/amlcode.h>
+#include <acpi/amlresrc.h>
 
 #define _COMPONENT          ACPI_EXECUTER
 ACPI_MODULE_NAME("exmisc")
@@ -97,7 +98,8 @@ acpi_ex_get_object_reference(union acpi_operand_object *obj_desc,
 
 		default:
 
-			ACPI_REPORT_ERROR(("Unknown Reference opcode in get_reference %X\n", obj_desc->reference.opcode));
+			ACPI_ERROR((AE_INFO, "Unknown Reference opcode %X",
+				    obj_desc->reference.opcode));
 			return_ACPI_STATUS(AE_AML_INTERNAL);
 		}
 		break;
@@ -112,7 +114,8 @@ acpi_ex_get_object_reference(union acpi_operand_object *obj_desc,
 
 	default:
 
-		ACPI_REPORT_ERROR(("Invalid descriptor type in get_reference: %X\n", ACPI_GET_DESCRIPTOR_TYPE(obj_desc)));
+		ACPI_ERROR((AE_INFO, "Invalid descriptor type %X",
+			    ACPI_GET_DESCRIPTOR_TYPE(obj_desc)));
 		return_ACPI_STATUS(AE_TYPE);
 	}
 
@@ -157,48 +160,65 @@ acpi_ex_concat_template(union acpi_operand_object *operand0,
 			union acpi_operand_object **actual_return_desc,
 			struct acpi_walk_state *walk_state)
 {
+	acpi_status status;
 	union acpi_operand_object *return_desc;
 	u8 *new_buf;
-	u8 *end_tag1;
-	u8 *end_tag2;
+	u8 *end_tag;
+	acpi_size length0;
 	acpi_size length1;
-	acpi_size length2;
+	acpi_size new_length;
 
 	ACPI_FUNCTION_TRACE("ex_concat_template");
 
-	/* Find the end_tags in each resource template */
+	/*
+	 * Find the end_tag descriptor in each resource template.
+	 * Note1: returned pointers point TO the end_tag, not past it.
+	 * Note2: zero-length buffers are allowed; treated like one end_tag
+	 */
+
+	/* Get the length of the first resource template */
 
-	end_tag1 = acpi_ut_get_resource_end_tag(operand0);
-	end_tag2 = acpi_ut_get_resource_end_tag(operand1);
-	if (!end_tag1 || !end_tag2) {
-		return_ACPI_STATUS(AE_AML_OPERAND_TYPE);
+	status = acpi_ut_get_resource_end_tag(operand0, &end_tag);
+	if (ACPI_FAILURE(status)) {
+		return_ACPI_STATUS(status);
 	}
 
-	/* Compute the length of each part */
+	length0 = ACPI_PTR_DIFF(end_tag, operand0->buffer.pointer);
+
+	/* Get the length of the second resource template */
+
+	status = acpi_ut_get_resource_end_tag(operand1, &end_tag);
+	if (ACPI_FAILURE(status)) {
+		return_ACPI_STATUS(status);
+	}
 
-	length1 = ACPI_PTR_DIFF(end_tag1, operand0->buffer.pointer);
-	length2 = ACPI_PTR_DIFF(end_tag2, operand1->buffer.pointer) + 2;	/* Size of END_TAG */
+	length1 = ACPI_PTR_DIFF(end_tag, operand1->buffer.pointer);
 
-	/* Create a new buffer object for the result */
+	/* Combine both lengths, minimum size will be 2 for end_tag */
 
-	return_desc = acpi_ut_create_buffer_object(length1 + length2);
+	new_length = length0 + length1 + sizeof(struct aml_resource_end_tag);
+
+	/* Create a new buffer object for the result (with one end_tag) */
+
+	return_desc = acpi_ut_create_buffer_object(new_length);
 	if (!return_desc) {
 		return_ACPI_STATUS(AE_NO_MEMORY);
 	}
 
-	/* Copy the templates to the new descriptor */
-
+	/*
+	 * Copy the templates to the new buffer, 0 first, then 1 follows. One
+	 * end_tag descriptor is copied from Operand1.
+	 */
 	new_buf = return_desc->buffer.pointer;
-	ACPI_MEMCPY(new_buf, operand0->buffer.pointer, length1);
-	ACPI_MEMCPY(new_buf + length1, operand1->buffer.pointer, length2);
+	ACPI_MEMCPY(new_buf, operand0->buffer.pointer, length0);
+	ACPI_MEMCPY(new_buf + length0, operand1->buffer.pointer, length1);
 
-	/* Compute the new checksum */
+	/* Insert end_tag and set the checksum to zero, means "ignore checksum" */
 
-	new_buf[return_desc->buffer.length - 1] =
-	    acpi_ut_generate_checksum(return_desc->buffer.pointer,
-				      (return_desc->buffer.length - 1));
+	new_buf[new_length - 1] = 0;
+	new_buf[new_length - 2] = ACPI_RESOURCE_NAME_END_TAG | 1;
 
-	/* Return the completed template descriptor */
+	/* Return the completed resource template */
 
 	*actual_return_desc = return_desc;
 	return_ACPI_STATUS(AE_OK);
@@ -229,7 +249,6 @@ acpi_ex_do_concatenate(union acpi_operand_object *operand0,
 	union acpi_operand_object *return_desc;
 	char *new_buf;
 	acpi_status status;
-	acpi_size new_length;
 
 	ACPI_FUNCTION_TRACE("ex_do_concatenate");
 
@@ -256,8 +275,8 @@ acpi_ex_do_concatenate(union acpi_operand_object *operand0,
 		break;
 
 	default:
-		ACPI_REPORT_ERROR(("Concat - invalid obj type: %X\n",
-				   ACPI_GET_OBJECT_TYPE(operand0)));
+		ACPI_ERROR((AE_INFO, "Invalid object type: %X",
+			    ACPI_GET_OBJECT_TYPE(operand0)));
 		status = AE_AML_INTERNAL;
 	}
 
@@ -296,8 +315,7 @@ acpi_ex_do_concatenate(union acpi_operand_object *operand0,
 
 		/* Copy the first integer, LSB first */
 
-		ACPI_MEMCPY(new_buf,
-			    &operand0->integer.value,
+		ACPI_MEMCPY(new_buf, &operand0->integer.value,
 			    acpi_gbl_integer_byte_width);
 
 		/* Copy the second integer (LSB first) after the first */
@@ -311,14 +329,11 @@ acpi_ex_do_concatenate(union acpi_operand_object *operand0,
 
 		/* Result of two Strings is a String */
 
-		new_length = (acpi_size) operand0->string.length +
-		    (acpi_size) local_operand1->string.length;
-		if (new_length > ACPI_MAX_STRING_CONVERSION) {
-			status = AE_AML_STRING_LIMIT;
-			goto cleanup;
-		}
-
-		return_desc = acpi_ut_create_string_object(new_length);
+		return_desc = acpi_ut_create_string_object((acpi_size)
+							   (operand0->string.
+							    length +
+							    local_operand1->
+							    string.length));
 		if (!return_desc) {
 			status = AE_NO_MEMORY;
 			goto cleanup;
@@ -338,11 +353,10 @@ acpi_ex_do_concatenate(union acpi_operand_object *operand0,
 		/* Result of two Buffers is a Buffer */
 
 		return_desc = acpi_ut_create_buffer_object((acpi_size)
-							   operand0->buffer.
-							   length +
-							   (acpi_size)
-							   local_operand1->
-							   buffer.length);
+							   (operand0->buffer.
+							    length +
+							    local_operand1->
+							    buffer.length));
 		if (!return_desc) {
 			status = AE_NO_MEMORY;
 			goto cleanup;
@@ -352,8 +366,8 @@ acpi_ex_do_concatenate(union acpi_operand_object *operand0,
 
 		/* Concatenate the buffers */
 
-		ACPI_MEMCPY(new_buf,
-			    operand0->buffer.pointer, operand0->buffer.length);
+		ACPI_MEMCPY(new_buf, operand0->buffer.pointer,
+			    operand0->buffer.length);
 		ACPI_MEMCPY(new_buf + operand0->buffer.length,
 			    local_operand1->buffer.pointer,
 			    local_operand1->buffer.length);
@@ -363,8 +377,8 @@ acpi_ex_do_concatenate(union acpi_operand_object *operand0,
 
 		/* Invalid object type, should not happen here */
 
-		ACPI_REPORT_ERROR(("Concatenate - Invalid object type: %X\n",
-				   ACPI_GET_OBJECT_TYPE(operand0)));
+		ACPI_ERROR((AE_INFO, "Invalid object type: %X",
+			    ACPI_GET_OBJECT_TYPE(operand0)));
 		status = AE_AML_INTERNAL;
 		goto cleanup;
 	}
@@ -625,9 +639,8 @@ acpi_ex_do_logical_op(u16 opcode,
 
 		/* Lexicographic compare: compare the data bytes */
 
-		compare = ACPI_MEMCMP((const char *)operand0->buffer.pointer,
-				      (const char *)local_operand1->buffer.
-				      pointer,
+		compare = ACPI_MEMCMP(operand0->buffer.pointer,
+				      local_operand1->buffer.pointer,
 				      (length0 > length1) ? length1 : length0);
 
 		switch (opcode) {

drivers/acpi/executer/exmutex.c

@@ -6,7 +6,7 @@
  *****************************************************************************/
 
 /*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -153,7 +153,9 @@ acpi_ex_acquire_mutex(union acpi_operand_object *time_desc,
 	/* Sanity check -- we must have a valid thread ID */
 
 	if (!walk_state->thread) {
-		ACPI_REPORT_ERROR(("Cannot acquire Mutex [%4.4s], null thread info\n", acpi_ut_get_node_name(obj_desc->mutex.node)));
+		ACPI_ERROR((AE_INFO,
+			    "Cannot acquire Mutex [%4.4s], null thread info",
+			    acpi_ut_get_node_name(obj_desc->mutex.node)));
 		return_ACPI_STATUS(AE_AML_INTERNAL);
 	}
 
@@ -162,7 +164,9 @@ acpi_ex_acquire_mutex(union acpi_operand_object *time_desc,
 	 * mutex.  This mechanism provides some deadlock prevention
 	 */
 	if (walk_state->thread->current_sync_level > obj_desc->mutex.sync_level) {
-		ACPI_REPORT_ERROR(("Cannot acquire Mutex [%4.4s], incorrect sync_level\n", acpi_ut_get_node_name(obj_desc->mutex.node)));
+		ACPI_ERROR((AE_INFO,
+			    "Cannot acquire Mutex [%4.4s], incorrect sync_level",
+			    acpi_ut_get_node_name(obj_desc->mutex.node)));
 		return_ACPI_STATUS(AE_AML_MUTEX_ORDER);
 	}
 
@@ -237,14 +241,18 @@ acpi_ex_release_mutex(union acpi_operand_object *obj_desc,
 	/* The mutex must have been previously acquired in order to release it */
 
 	if (!obj_desc->mutex.owner_thread) {
-		ACPI_REPORT_ERROR(("Cannot release Mutex [%4.4s], not acquired\n", acpi_ut_get_node_name(obj_desc->mutex.node)));
+		ACPI_ERROR((AE_INFO,
+			    "Cannot release Mutex [%4.4s], not acquired",
+			    acpi_ut_get_node_name(obj_desc->mutex.node)));
 		return_ACPI_STATUS(AE_AML_MUTEX_NOT_ACQUIRED);
 	}
 
 	/* Sanity check -- we must have a valid thread ID */
 
 	if (!walk_state->thread) {
-		ACPI_REPORT_ERROR(("Cannot release Mutex [%4.4s], null thread info\n", acpi_ut_get_node_name(obj_desc->mutex.node)));
+		ACPI_ERROR((AE_INFO,
+			    "Cannot release Mutex [%4.4s], null thread info",
+			    acpi_ut_get_node_name(obj_desc->mutex.node)));
 		return_ACPI_STATUS(AE_AML_INTERNAL);
 	}
 
@@ -255,7 +263,11 @@ acpi_ex_release_mutex(union acpi_operand_object *obj_desc,
 	if ((obj_desc->mutex.owner_thread->thread_id !=
 	     walk_state->thread->thread_id)
 	    && (obj_desc->mutex.semaphore != acpi_gbl_global_lock_semaphore)) {
-		ACPI_REPORT_ERROR(("Thread %X cannot release Mutex [%4.4s] acquired by thread %X\n", walk_state->thread->thread_id, acpi_ut_get_node_name(obj_desc->mutex.node), obj_desc->mutex.owner_thread->thread_id));
+		ACPI_ERROR((AE_INFO,
+			    "Thread %X cannot release Mutex [%4.4s] acquired by thread %X",
+			    walk_state->thread->thread_id,
+			    acpi_ut_get_node_name(obj_desc->mutex.node),
+			    obj_desc->mutex.owner_thread->thread_id));
 		return_ACPI_STATUS(AE_AML_NOT_OWNER);
 	}
 
@@ -264,7 +276,9 @@ acpi_ex_release_mutex(union acpi_operand_object *obj_desc,
 	 * equal to the current sync level
 	 */
 	if (obj_desc->mutex.sync_level > walk_state->thread->current_sync_level) {
-		ACPI_REPORT_ERROR(("Cannot release Mutex [%4.4s], incorrect sync_level\n", acpi_ut_get_node_name(obj_desc->mutex.node)));
+		ACPI_ERROR((AE_INFO,
+			    "Cannot release Mutex [%4.4s], incorrect sync_level",
+			    acpi_ut_get_node_name(obj_desc->mutex.node)));
 		return_ACPI_STATUS(AE_AML_MUTEX_ORDER);
 	}
 

drivers/acpi/executer/exnames.c

@@ -6,7 +6,7 @@
  *****************************************************************************/
 
 /*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -99,7 +99,8 @@ static char *acpi_ex_allocate_name_string(u32 prefix_count, u32 num_name_segs)
 	 */
 	name_string = ACPI_MEM_ALLOCATE(size_needed);
 	if (!name_string) {
-		ACPI_REPORT_ERROR(("ex_allocate_name_string: Could not allocate size %d\n", size_needed));
+		ACPI_ERROR((AE_INFO,
+			    "Could not allocate size %d", size_needed));
 		return_PTR(NULL);
 	}
 
@@ -167,8 +168,7 @@ static acpi_status acpi_ex_name_segment(u8 ** in_aml_address, char *name_string)
 	char_buf[0] = *aml_address;
 
 	if ('0' <= char_buf[0] && char_buf[0] <= '9') {
-		ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "leading digit: %c\n",
-				  char_buf[0]));
+		ACPI_ERROR((AE_INFO, "Invalid leading digit: %c", char_buf[0]));
 		return_ACPI_STATUS(AE_CTRL_PENDING);
 	}
 
@@ -191,10 +191,10 @@ static acpi_status acpi_ex_name_segment(u8 ** in_aml_address, char *name_string)
 		if (name_string) {
 			ACPI_STRCAT(name_string, char_buf);
 			ACPI_DEBUG_PRINT((ACPI_DB_NAMES,
-					  "Appended to - %s \n", name_string));
+					  "Appended to - %s\n", name_string));
 		} else {
 			ACPI_DEBUG_PRINT((ACPI_DB_NAMES,
-					  "No Name string - %s \n", char_buf));
+					  "No Name string - %s\n", char_buf));
 		}
 	} else if (index == 0) {
 		/*
@@ -211,12 +211,12 @@ static acpi_status acpi_ex_name_segment(u8 ** in_aml_address, char *name_string)
 		 * the required 4
 		 */
 		status = AE_AML_BAD_NAME;
-		ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-				  "Bad character %02x in name, at %p\n",
-				  *aml_address, aml_address));
+		ACPI_ERROR((AE_INFO,
+			    "Bad character %02x in name, at %p",
+			    *aml_address, aml_address));
 	}
 
-	*in_aml_address = (u8 *) aml_address;
+	*in_aml_address = ACPI_CAST_PTR(u8, aml_address);
 	return_ACPI_STATUS(status);
 }
 
@@ -412,8 +412,7 @@ acpi_ex_get_name_string(acpi_object_type data_type,
 	if (AE_CTRL_PENDING == status && has_prefix) {
 		/* Ran out of segments after processing a prefix */
 
-		ACPI_REPORT_ERROR(("ex_do_name: Malformed Name at %p\n",
-				   name_string));
+		ACPI_ERROR((AE_INFO, "Malformed Name at %p", name_string));
 		status = AE_AML_BAD_NAME;
 	}
 

drivers/acpi/executer/exoparg1.c

@@ -6,7 +6,7 @@
  *****************************************************************************/
 
 /*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -111,7 +111,8 @@ acpi_status acpi_ex_opcode_0A_0T_1R(struct acpi_walk_state *walk_state)
 
 	default:		/*  Unknown opcode  */
 
-		ACPI_REPORT_ERROR(("acpi_ex_opcode_0A_0T_1R: Unknown opcode %X\n", walk_state->opcode));
+		ACPI_ERROR((AE_INFO, "Unknown AML opcode %X",
+			    walk_state->opcode));
 		status = AE_AML_BAD_OPCODE;
 		break;
 	}
@@ -188,7 +189,8 @@ acpi_status acpi_ex_opcode_1A_0T_0R(struct acpi_walk_state *walk_state)
 
 	default:		/*  Unknown opcode  */
 
-		ACPI_REPORT_ERROR(("acpi_ex_opcode_1A_0T_0R: Unknown opcode %X\n", walk_state->opcode));
+		ACPI_ERROR((AE_INFO, "Unknown AML opcode %X",
+			    walk_state->opcode));
 		status = AE_AML_BAD_OPCODE;
 		break;
 	}
@@ -227,7 +229,8 @@ acpi_status acpi_ex_opcode_1A_1T_0R(struct acpi_walk_state *walk_state)
 
 	default:		/* Unknown opcode */
 
-		ACPI_REPORT_ERROR(("acpi_ex_opcode_1A_1T_0R: Unknown opcode %X\n", walk_state->opcode));
+		ACPI_ERROR((AE_INFO, "Unknown AML opcode %X",
+			    walk_state->opcode));
 		status = AE_AML_BAD_OPCODE;
 		goto cleanup;
 	}
@@ -346,9 +349,9 @@ acpi_status acpi_ex_opcode_1A_1T_1R(struct acpi_walk_state *walk_state)
 				/* Check the range of the digit */
 
 				if (temp32 > 9) {
-					ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-							  "BCD digit too large (not decimal): 0x%X\n",
-							  temp32));
+					ACPI_ERROR((AE_INFO,
+						    "BCD digit too large (not decimal): 0x%X",
+						    temp32));
 
 					status = AE_AML_NUMERIC_OVERFLOW;
 					goto cleanup;
@@ -393,12 +396,10 @@ acpi_status acpi_ex_opcode_1A_1T_1R(struct acpi_walk_state *walk_state)
 			/* Overflow if there is any data left in Digit */
 
 			if (digit > 0) {
-				ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-						  "Integer too large to convert to BCD: %8.8X%8.8X\n",
-						  ACPI_FORMAT_UINT64(operand
-								     [0]->
-								     integer.
-								     value)));
+				ACPI_ERROR((AE_INFO,
+					    "Integer too large to convert to BCD: %8.8X%8.8X",
+					    ACPI_FORMAT_UINT64(operand[0]->
+							       integer.value)));
 				status = AE_AML_NUMERIC_OVERFLOW;
 				goto cleanup;
 			}
@@ -525,15 +526,16 @@ acpi_status acpi_ex_opcode_1A_1T_1R(struct acpi_walk_state *walk_state)
 
 		/* These are two obsolete opcodes */
 
-		ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-				  "%s is obsolete and not implemented\n",
-				  acpi_ps_get_opcode_name(walk_state->opcode)));
+		ACPI_ERROR((AE_INFO,
+			    "%s is obsolete and not implemented",
+			    acpi_ps_get_opcode_name(walk_state->opcode)));
 		status = AE_SUPPORT;
 		goto cleanup;
 
 	default:		/* Unknown opcode */
 
-		ACPI_REPORT_ERROR(("acpi_ex_opcode_1A_1T_1R: Unknown opcode %X\n", walk_state->opcode));
+		ACPI_ERROR((AE_INFO, "Unknown AML opcode %X",
+			    walk_state->opcode));
 		status = AE_AML_BAD_OPCODE;
 		goto cleanup;
 	}
@@ -639,11 +641,10 @@ acpi_status acpi_ex_opcode_1A_0T_1R(struct acpi_walk_state *walk_state)
 		    acpi_ex_resolve_operands(AML_LNOT_OP, &temp_desc,
 					     walk_state);
 		if (ACPI_FAILURE(status)) {
-			ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-					  "%s: bad operand(s) %s\n",
-					  acpi_ps_get_opcode_name(walk_state->
-								  opcode),
-					  acpi_format_exception(status)));
+			ACPI_EXCEPTION((AE_INFO, status,
+					"While resolving operands for [%s]",
+					acpi_ps_get_opcode_name(walk_state->
+								opcode)));
 
 			goto cleanup;
 		}
@@ -742,9 +743,9 @@ acpi_status acpi_ex_opcode_1A_0T_1R(struct acpi_walk_state *walk_state)
 			break;
 
 		default:
-			ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-					  "size_of - Operand is not Buf/Int/Str/Pkg - found type %s\n",
-					  acpi_ut_get_type_name(type)));
+			ACPI_ERROR((AE_INFO,
+				    "Operand is not Buf/Int/Str/Pkg - found type %s",
+				    acpi_ut_get_type_name(type)));
 			status = AE_AML_OPERAND_TYPE;
 			goto cleanup;
 		}
@@ -941,11 +942,10 @@ acpi_status acpi_ex_opcode_1A_0T_1R(struct acpi_walk_state *walk_state)
 
 				default:
 
-					ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-							  "Unknown Index target_type %X in obj %p\n",
-							  operand[0]->reference.
-							  target_type,
-							  operand[0]));
+					ACPI_ERROR((AE_INFO,
+						    "Unknown Index target_type %X in obj %p",
+						    operand[0]->reference.
+						    target_type, operand[0]));
 					status = AE_AML_OPERAND_TYPE;
 					goto cleanup;
 				}
@@ -971,11 +971,10 @@ acpi_status acpi_ex_opcode_1A_0T_1R(struct acpi_walk_state *walk_state)
 				break;
 
 			default:
-				ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-						  "Unknown opcode in ref(%p) - %X\n",
-						  operand[0],
-						  operand[0]->reference.
-						  opcode));
+				ACPI_ERROR((AE_INFO,
+					    "Unknown opcode in ref(%p) - %X",
+					    operand[0],
+					    operand[0]->reference.opcode));
 
 				status = AE_TYPE;
 				goto cleanup;
@@ -985,7 +984,8 @@ acpi_status acpi_ex_opcode_1A_0T_1R(struct acpi_walk_state *walk_state)
 
 	default:
 
-		ACPI_REPORT_ERROR(("acpi_ex_opcode_1A_0T_1R: Unknown opcode %X\n", walk_state->opcode));
+		ACPI_ERROR((AE_INFO, "Unknown AML opcode %X",
+			    walk_state->opcode));
 		status = AE_AML_BAD_OPCODE;
 		goto cleanup;
 	}

drivers/acpi/executer/exoparg2.c

@@ -5,7 +5,7 @@
  *****************************************************************************/
 
 /*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -111,9 +111,9 @@ acpi_status acpi_ex_opcode_2A_0T_0R(struct acpi_walk_state *walk_state)
 		/* Are notifies allowed on this object? */
 
 		if (!acpi_ev_is_notify_object(node)) {
-			ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-					  "Unexpected notify object type [%s]\n",
-					  acpi_ut_get_type_name(node->type)));
+			ACPI_ERROR((AE_INFO,
+				    "Unexpected notify object type [%s]",
+				    acpi_ut_get_type_name(node->type)));
 
 			status = AE_AML_OPERAND_TYPE;
 			break;
@@ -157,7 +157,8 @@ acpi_status acpi_ex_opcode_2A_0T_0R(struct acpi_walk_state *walk_state)
 
 	default:
 
-		ACPI_REPORT_ERROR(("acpi_ex_opcode_2A_0T_0R: Unknown opcode %X\n", walk_state->opcode));
+		ACPI_ERROR((AE_INFO, "Unknown AML opcode %X",
+			    walk_state->opcode));
 		status = AE_AML_BAD_OPCODE;
 	}
 
@@ -221,7 +222,8 @@ acpi_status acpi_ex_opcode_2A_2T_1R(struct acpi_walk_state *walk_state)
 
 	default:
 
-		ACPI_REPORT_ERROR(("acpi_ex_opcode_2A_2T_1R: Unknown opcode %X\n", walk_state->opcode));
+		ACPI_ERROR((AE_INFO, "Unknown AML opcode %X",
+			    walk_state->opcode));
 		status = AE_AML_BAD_OPCODE;
 		goto cleanup;
 	}
@@ -344,10 +346,6 @@ acpi_status acpi_ex_opcode_2A_1T_1R(struct acpi_walk_state *walk_state)
 		       (length < operand[1]->integer.value) &&
 		       (operand[0]->buffer.pointer[length])) {
 			length++;
-			if (length > ACPI_MAX_STRING_CONVERSION) {
-				status = AE_AML_STRING_LIMIT;
-				goto cleanup;
-			}
 		}
 
 		/* Allocate a new string object */
@@ -358,8 +356,10 @@ acpi_status acpi_ex_opcode_2A_1T_1R(struct acpi_walk_state *walk_state)
 			goto cleanup;
 		}
 
-		/* Copy the raw buffer data with no transform. NULL terminated already */
-
+		/*
+		 * Copy the raw buffer data with no transform.
+		 * (NULL terminated already)
+		 */
 		ACPI_MEMCPY(return_desc->string.pointer,
 			    operand[0]->buffer.pointer, length);
 		break;
@@ -391,10 +391,10 @@ acpi_status acpi_ex_opcode_2A_1T_1R(struct acpi_walk_state *walk_state)
 			/* Object to be indexed is a Package */
 
 			if (index >= operand[0]->package.count) {
-				ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-						  "Index value (%X%8.8X) beyond package end (%X)\n",
-						  ACPI_FORMAT_UINT64(index),
-						  operand[0]->package.count));
+				ACPI_ERROR((AE_INFO,
+					    "Index value (%X%8.8X) beyond package end (%X)",
+					    ACPI_FORMAT_UINT64(index),
+					    operand[0]->package.count));
 				status = AE_AML_PACKAGE_LIMIT;
 				goto cleanup;
 			}
@@ -407,10 +407,10 @@ acpi_status acpi_ex_opcode_2A_1T_1R(struct acpi_walk_state *walk_state)
 			/* Object to be indexed is a Buffer/String */
 
 			if (index >= operand[0]->buffer.length) {
-				ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-						  "Index value (%X%8.8X) beyond end of buffer (%X)\n",
-						  ACPI_FORMAT_UINT64(index),
-						  operand[0]->buffer.length));
+				ACPI_ERROR((AE_INFO,
+					    "Index value (%X%8.8X) beyond end of buffer (%X)",
+					    ACPI_FORMAT_UINT64(index),
+					    operand[0]->buffer.length));
 				status = AE_AML_BUFFER_LIMIT;
 				goto cleanup;
 			}
@@ -442,7 +442,8 @@ acpi_status acpi_ex_opcode_2A_1T_1R(struct acpi_walk_state *walk_state)
 
 	default:
 
-		ACPI_REPORT_ERROR(("acpi_ex_opcode_2A_1T_1R: Unknown opcode %X\n", walk_state->opcode));
+		ACPI_ERROR((AE_INFO, "Unknown AML opcode %X",
+			    walk_state->opcode));
 		status = AE_AML_BAD_OPCODE;
 		break;
 	}
@@ -546,7 +547,8 @@ acpi_status acpi_ex_opcode_2A_0T_1R(struct acpi_walk_state *walk_state)
 
 	default:
 
-		ACPI_REPORT_ERROR(("acpi_ex_opcode_2A_0T_1R: Unknown opcode %X\n", walk_state->opcode));
+		ACPI_ERROR((AE_INFO, "Unknown AML opcode %X",
+			    walk_state->opcode));
 		status = AE_AML_BAD_OPCODE;
 		goto cleanup;
 	}

drivers/acpi/executer/exoparg3.c

@@ -6,7 +6,7 @@
  *****************************************************************************/
 
 /*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -119,7 +119,8 @@ acpi_status acpi_ex_opcode_3A_0T_0R(struct acpi_walk_state *walk_state)
 
 	default:
 
-		ACPI_REPORT_ERROR(("acpi_ex_opcode_3A_0T_0R: Unknown opcode %X\n", walk_state->opcode));
+		ACPI_ERROR((AE_INFO, "Unknown AML opcode %X",
+			    walk_state->opcode));
 		status = AE_AML_BAD_OPCODE;
 		goto cleanup;
 	}
@@ -223,8 +224,8 @@ acpi_status acpi_ex_opcode_3A_1T_1R(struct acpi_walk_state *walk_state)
 			goto cleanup;
 		}
 
-		if (length > 0) {
-			/* Copy the portion requested */
+		if (buffer) {
+			/* We have a buffer, copy the portion requested */
 
 			ACPI_MEMCPY(buffer, operand[0]->string.pointer + index,
 				    length);
@@ -242,7 +243,8 @@ acpi_status acpi_ex_opcode_3A_1T_1R(struct acpi_walk_state *walk_state)
 
 	default:
 
-		ACPI_REPORT_ERROR(("acpi_ex_opcode_3A_0T_0R: Unknown opcode %X\n", walk_state->opcode));
+		ACPI_ERROR((AE_INFO, "Unknown AML opcode %X",
+			    walk_state->opcode));
 		status = AE_AML_BAD_OPCODE;
 		goto cleanup;
 	}

drivers/acpi/executer/exoparg6.c

@@ -6,7 +6,7 @@
  *****************************************************************************/
 
 /*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -234,8 +234,7 @@ acpi_status acpi_ex_opcode_6A_0T_1R(struct acpi_walk_state * walk_state)
 
 		if ((operand[1]->integer.value > MAX_MATCH_OPERATOR) ||
 		    (operand[3]->integer.value > MAX_MATCH_OPERATOR)) {
-			ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-					  "Match operator out of range\n"));
+			ACPI_ERROR((AE_INFO, "Match operator out of range"));
 			status = AE_AML_OPERAND_VALUE;
 			goto cleanup;
 		}
@@ -244,10 +243,10 @@ acpi_status acpi_ex_opcode_6A_0T_1R(struct acpi_walk_state * walk_state)
 
 		index = operand[5]->integer.value;
 		if (index >= operand[0]->package.count) {
-			ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-					  "Index (%X%8.8X) beyond package end (%X)\n",
-					  ACPI_FORMAT_UINT64(index),
-					  operand[0]->package.count));
+			ACPI_ERROR((AE_INFO,
+				    "Index (%X%8.8X) beyond package end (%X)",
+				    ACPI_FORMAT_UINT64(index),
+				    operand[0]->package.count));
 			status = AE_AML_PACKAGE_LIMIT;
 			goto cleanup;
 		}
@@ -316,7 +315,8 @@ acpi_status acpi_ex_opcode_6A_0T_1R(struct acpi_walk_state * walk_state)
 
 	default:
 
-		ACPI_REPORT_ERROR(("acpi_ex_opcode_6A_0T_1R: Unknown opcode %X\n", walk_state->opcode));
+		ACPI_ERROR((AE_INFO, "Unknown AML opcode %X",
+			    walk_state->opcode));
 		status = AE_AML_BAD_OPCODE;
 		goto cleanup;
 	}

drivers/acpi/executer/exprep.c

@@ -6,7 +6,7 @@
  *****************************************************************************/
 
 /*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -274,9 +274,8 @@ acpi_ex_decode_field_access(union acpi_operand_object *obj_desc,
 	default:
 		/* Invalid field access type */
 
-		ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-				  "Unknown field access type %X\n", access));
-		return_VALUE(0);
+		ACPI_ERROR((AE_INFO, "Unknown field access type %X", access));
+		return_UINT32(0);
 	}
 
 	if (ACPI_GET_OBJECT_TYPE(obj_desc) == ACPI_TYPE_BUFFER_FIELD) {
@@ -289,7 +288,7 @@ acpi_ex_decode_field_access(union acpi_operand_object *obj_desc,
 	}
 
 	*return_byte_alignment = byte_alignment;
-	return_VALUE(bit_length);
+	return_UINT32(bit_length);
 }
 
 /*******************************************************************************
@@ -422,15 +421,15 @@ acpi_status acpi_ex_prep_field_value(struct acpi_create_field_info *info)
 
 	if (info->field_type != ACPI_TYPE_LOCAL_INDEX_FIELD) {
 		if (!info->region_node) {
-			ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Null region_node\n"));
+			ACPI_ERROR((AE_INFO, "Null region_node"));
 			return_ACPI_STATUS(AE_AML_NO_OPERAND);
 		}
 
 		type = acpi_ns_get_type(info->region_node);
 		if (type != ACPI_TYPE_REGION) {
-			ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-					  "Needed Region, found type %X (%s)\n",
-					  type, acpi_ut_get_type_name(type)));
+			ACPI_ERROR((AE_INFO,
+				    "Needed Region, found type %X (%s)",
+				    type, acpi_ut_get_type_name(type)));
 
 			return_ACPI_STATUS(AE_AML_OPERAND_TYPE);
 		}
@@ -499,17 +498,17 @@ acpi_status acpi_ex_prep_field_value(struct acpi_create_field_info *info)
 
 	case ACPI_TYPE_LOCAL_INDEX_FIELD:
 
+		/* Get the Index and Data registers */
+
 		obj_desc->index_field.index_obj =
 		    acpi_ns_get_attached_object(info->register_node);
 		obj_desc->index_field.data_obj =
 		    acpi_ns_get_attached_object(info->data_register_node);
-		obj_desc->index_field.value = (u32)
-		    (info->field_bit_position /
-		     ACPI_MUL_8(obj_desc->field.access_byte_width));
 
 		if (!obj_desc->index_field.data_obj
 		    || !obj_desc->index_field.index_obj) {
-			ACPI_REPORT_ERROR(("Null Index Object during field prep\n"));
+			ACPI_ERROR((AE_INFO,
+				    "Null Index Object during field prep"));
 			acpi_ut_delete_object_desc(obj_desc);
 			return_ACPI_STATUS(AE_AML_INTERNAL);
 		}
@@ -519,6 +518,15 @@ acpi_status acpi_ex_prep_field_value(struct acpi_create_field_info *info)
 		acpi_ut_add_reference(obj_desc->index_field.data_obj);
 		acpi_ut_add_reference(obj_desc->index_field.index_obj);
 
+		/*
+		 * The value written to the Index register is the byte offset of the
+		 * target field
+		 * Note: may change code to: ACPI_DIV_8 (Info->field_bit_position)
+		 */
+		obj_desc->index_field.value = (u32)
+		    (info->field_bit_position /
+		     ACPI_MUL_8(obj_desc->field.access_byte_width));
+
 		ACPI_DEBUG_PRINT((ACPI_DB_BFIELD,
 				  "index_field: bit_off %X, Off %X, Value %X, Gran %X, Index %p, Data %p\n",
 				  obj_desc->index_field.start_field_bit_offset,

drivers/acpi/executer/exregion.c

@@ -6,7 +6,7 @@
  *****************************************************************************/
 
 /*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -77,7 +77,7 @@ acpi_ex_system_memory_space_handler(u32 function,
 	struct acpi_mem_space_context *mem_info = region_context;
 	u32 length;
 	acpi_size window_size;
-#ifndef ACPI_MISALIGNED_TRANSFERS
+#ifdef ACPI_MISALIGNMENT_NOT_SUPPORTED
 	u32 remainder;
 #endif
 
@@ -103,13 +103,12 @@ acpi_ex_system_memory_space_handler(u32 function,
 		break;
 
 	default:
-		ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-				  "Invalid system_memory width %d\n",
-				  bit_width));
+		ACPI_ERROR((AE_INFO, "Invalid system_memory width %d",
+			    bit_width));
 		return_ACPI_STATUS(AE_AML_OPERAND_VALUE);
 	}
 
-#ifndef ACPI_MISALIGNED_TRANSFERS
+#ifdef ACPI_MISALIGNMENT_NOT_SUPPORTED
 	/*
 	 * Hardware does not support non-aligned data transfers, we must verify
 	 * the request.
@@ -159,10 +158,10 @@ acpi_ex_system_memory_space_handler(u32 function,
 					    (void **)&mem_info->
 					    mapped_logical_address);
 		if (ACPI_FAILURE(status)) {
-			ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-					  "Could not map memory at %8.8X%8.8X, size %X\n",
-					  ACPI_FORMAT_UINT64(address),
-					  (u32) window_size));
+			ACPI_ERROR((AE_INFO,
+				    "Could not map memory at %8.8X%8.8X, size %X",
+				    ACPI_FORMAT_UINT64(address),
+				    (u32) window_size));
 			mem_info->mapped_length = 0;
 			return_ACPI_STATUS(status);
 		}
@@ -199,20 +198,20 @@ acpi_ex_system_memory_space_handler(u32 function,
 		*value = 0;
 		switch (bit_width) {
 		case 8:
-			*value = (acpi_integer) * ((u8 *) logical_addr_ptr);
+			*value = (acpi_integer) ACPI_GET8(logical_addr_ptr);
 			break;
 
 		case 16:
-			*value = (acpi_integer) * ((u16 *) logical_addr_ptr);
+			*value = (acpi_integer) ACPI_GET16(logical_addr_ptr);
 			break;
 
 		case 32:
-			*value = (acpi_integer) * ((u32 *) logical_addr_ptr);
+			*value = (acpi_integer) ACPI_GET32(logical_addr_ptr);
 			break;
 
 #if ACPI_MACHINE_WIDTH != 16
 		case 64:
-			*value = (acpi_integer) * ((u64 *) logical_addr_ptr);
+			*value = (acpi_integer) ACPI_GET64(logical_addr_ptr);
 			break;
 #endif
 		default:
@@ -225,20 +224,20 @@ acpi_ex_system_memory_space_handler(u32 function,
 
 		switch (bit_width) {
 		case 8:
-			*(u8 *) logical_addr_ptr = (u8) * value;
+			ACPI_SET8(logical_addr_ptr) = (u8) * value;
 			break;
 
 		case 16:
-			*(u16 *) logical_addr_ptr = (u16) * value;
+			ACPI_SET16(logical_addr_ptr) = (u16) * value;
 			break;
 
 		case 32:
-			*(u32 *) logical_addr_ptr = (u32) * value;
+			ACPI_SET32(logical_addr_ptr) = (u32) * value;
 			break;
 
 #if ACPI_MACHINE_WIDTH != 16
 		case 64:
-			*(u64 *) logical_addr_ptr = (u64) * value;
+			ACPI_SET64(logical_addr_ptr) = (u64) * value;
 			break;
 #endif
 

drivers/acpi/executer/exresnte.c

@@ -6,7 +6,7 @@
  *****************************************************************************/
 
 /*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -122,8 +122,7 @@ acpi_ex_resolve_node_to_value(struct acpi_namespace_node **object_ptr,
 	}
 
 	if (!source_desc) {
-		ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-				  "No object attached to node %p\n", node));
+		ACPI_ERROR((AE_INFO, "No object attached to node %p", node));
 		return_ACPI_STATUS(AE_AML_NO_OPERAND);
 	}
 
@@ -135,10 +134,8 @@ acpi_ex_resolve_node_to_value(struct acpi_namespace_node **object_ptr,
 	case ACPI_TYPE_PACKAGE:
 
 		if (ACPI_GET_OBJECT_TYPE(source_desc) != ACPI_TYPE_PACKAGE) {
-			ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-					  "Object not a Package, type %s\n",
-					  acpi_ut_get_object_type_name
-					  (source_desc)));
+			ACPI_ERROR((AE_INFO, "Object not a Package, type %s",
+				    acpi_ut_get_object_type_name(source_desc)));
 			return_ACPI_STATUS(AE_AML_OPERAND_TYPE);
 		}
 
@@ -154,10 +151,8 @@ acpi_ex_resolve_node_to_value(struct acpi_namespace_node **object_ptr,
 	case ACPI_TYPE_BUFFER:
 
 		if (ACPI_GET_OBJECT_TYPE(source_desc) != ACPI_TYPE_BUFFER) {
-			ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-					  "Object not a Buffer, type %s\n",
-					  acpi_ut_get_object_type_name
-					  (source_desc)));
+			ACPI_ERROR((AE_INFO, "Object not a Buffer, type %s",
+				    acpi_ut_get_object_type_name(source_desc)));
 			return_ACPI_STATUS(AE_AML_OPERAND_TYPE);
 		}
 
@@ -173,10 +168,8 @@ acpi_ex_resolve_node_to_value(struct acpi_namespace_node **object_ptr,
 	case ACPI_TYPE_STRING:
 
 		if (ACPI_GET_OBJECT_TYPE(source_desc) != ACPI_TYPE_STRING) {
-			ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-					  "Object not a String, type %s\n",
-					  acpi_ut_get_object_type_name
-					  (source_desc)));
+			ACPI_ERROR((AE_INFO, "Object not a String, type %s",
+				    acpi_ut_get_object_type_name(source_desc)));
 			return_ACPI_STATUS(AE_AML_OPERAND_TYPE);
 		}
 
@@ -189,10 +182,8 @@ acpi_ex_resolve_node_to_value(struct acpi_namespace_node **object_ptr,
 	case ACPI_TYPE_INTEGER:
 
 		if (ACPI_GET_OBJECT_TYPE(source_desc) != ACPI_TYPE_INTEGER) {
-			ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-					  "Object not a Integer, type %s\n",
-					  acpi_ut_get_object_type_name
-					  (source_desc)));
+			ACPI_ERROR((AE_INFO, "Object not a Integer, type %s",
+				    acpi_ut_get_object_type_name(source_desc)));
 			return_ACPI_STATUS(AE_AML_OPERAND_TYPE);
 		}
 
@@ -236,9 +227,8 @@ acpi_ex_resolve_node_to_value(struct acpi_namespace_node **object_ptr,
 
 	case ACPI_TYPE_ANY:
 
-		ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-				  "Untyped entry %p, no attached object!\n",
-				  node));
+		ACPI_ERROR((AE_INFO,
+			    "Untyped entry %p, no attached object!", node));
 
 		return_ACPI_STATUS(AE_AML_OPERAND_TYPE);	/* Cannot be AE_TYPE */
 
@@ -257,12 +247,11 @@ acpi_ex_resolve_node_to_value(struct acpi_namespace_node **object_ptr,
 		default:
 			/* No named references are allowed here */
 
-			ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-					  "Unsupported Reference opcode %X (%s)\n",
-					  source_desc->reference.opcode,
-					  acpi_ps_get_opcode_name(source_desc->
-								  reference.
-								  opcode)));
+			ACPI_ERROR((AE_INFO,
+				    "Unsupported Reference opcode %X (%s)",
+				    source_desc->reference.opcode,
+				    acpi_ps_get_opcode_name(source_desc->
+							    reference.opcode)));
 
 			return_ACPI_STATUS(AE_AML_OPERAND_TYPE);
 		}
@@ -272,9 +261,9 @@ acpi_ex_resolve_node_to_value(struct acpi_namespace_node **object_ptr,
 
 		/* Default case is for unknown types */
 
-		ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-				  "Node %p - Unknown object type %X\n",
-				  node, entry_type));
+		ACPI_ERROR((AE_INFO,
+			    "Node %p - Unknown object type %X",
+			    node, entry_type));
 
 		return_ACPI_STATUS(AE_AML_OPERAND_TYPE);
 

drivers/acpi/executer/exresolv.c

@@ -6,7 +6,7 @@
  *****************************************************************************/
 
 /*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -81,7 +81,7 @@ acpi_ex_resolve_to_value(union acpi_operand_object **stack_ptr,
 	ACPI_FUNCTION_TRACE_PTR("ex_resolve_to_value", stack_ptr);
 
 	if (!stack_ptr || !*stack_ptr) {
-		ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Internal - null pointer\n"));
+		ACPI_ERROR((AE_INFO, "Internal - null pointer"));
 		return_ACPI_STATUS(AE_AML_NO_OPERAND);
 	}
 
@@ -97,8 +97,7 @@ acpi_ex_resolve_to_value(union acpi_operand_object **stack_ptr,
 		}
 
 		if (!*stack_ptr) {
-			ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-					  "Internal - null pointer\n"));
+			ACPI_ERROR((AE_INFO, "Internal - null pointer"));
 			return_ACPI_STATUS(AE_AML_NO_OPERAND);
 		}
 	}
@@ -228,9 +227,9 @@ acpi_ex_resolve_object_to_value(union acpi_operand_object **stack_ptr,
 					 * A NULL object descriptor means an unitialized element of
 					 * the package, can't dereference it
 					 */
-					ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-							  "Attempt to deref an Index to NULL pkg element Idx=%p\n",
-							  stack_desc));
+					ACPI_ERROR((AE_INFO,
+						    "Attempt to deref an Index to NULL pkg element Idx=%p",
+						    stack_desc));
 					status = AE_AML_UNINITIALIZED_ELEMENT;
 				}
 				break;
@@ -239,7 +238,10 @@ acpi_ex_resolve_object_to_value(union acpi_operand_object **stack_ptr,
 
 				/* Invalid reference object */
 
-				ACPI_REPORT_ERROR(("During resolve, Unknown target_type %X in Index/Reference obj %p\n", stack_desc->reference.target_type, stack_desc));
+				ACPI_ERROR((AE_INFO,
+					    "Unknown target_type %X in Index/Reference obj %p",
+					    stack_desc->reference.target_type,
+					    stack_desc));
 				status = AE_AML_INTERNAL;
 				break;
 			}
@@ -264,7 +266,10 @@ acpi_ex_resolve_object_to_value(union acpi_operand_object **stack_ptr,
 
 		default:
 
-			ACPI_REPORT_ERROR(("During resolve, Unknown Reference opcode %X (%s) in %p\n", opcode, acpi_ps_get_opcode_name(opcode), stack_desc));
+			ACPI_ERROR((AE_INFO,
+				    "Unknown Reference opcode %X (%s) in %p",
+				    opcode, acpi_ps_get_opcode_name(opcode),
+				    stack_desc));
 			status = AE_AML_INTERNAL;
 			break;
 		}
@@ -386,7 +391,9 @@ acpi_ex_resolve_multiple(struct acpi_walk_state *walk_state,
 
 			if (ACPI_GET_DESCRIPTOR_TYPE(node) !=
 			    ACPI_DESC_TYPE_NAMED) {
-				ACPI_REPORT_ERROR(("acpi_ex_resolve_multiple: Not a NS node %p [%s]\n", node, acpi_ut_get_descriptor_name(node)));
+				ACPI_ERROR((AE_INFO, "Not a NS node %p [%s]",
+					    node,
+					    acpi_ut_get_descriptor_name(node)));
 				return_ACPI_STATUS(AE_AML_INTERNAL);
 			}
 
@@ -442,7 +449,9 @@ acpi_ex_resolve_multiple(struct acpi_walk_state *walk_state,
 
 			if (ACPI_GET_DESCRIPTOR_TYPE(node) !=
 			    ACPI_DESC_TYPE_NAMED) {
-				ACPI_REPORT_ERROR(("acpi_ex_resolve_multiple: Not a NS node %p [%s]\n", node, acpi_ut_get_descriptor_name(node)));
+				ACPI_ERROR((AE_INFO, "Not a NS node %p [%s]",
+					    node,
+					    acpi_ut_get_descriptor_name(node)));
 				return_ACPI_STATUS(AE_AML_INTERNAL);
 			}
 
@@ -511,7 +520,9 @@ acpi_ex_resolve_multiple(struct acpi_walk_state *walk_state,
 
 		default:
 
-			ACPI_REPORT_ERROR(("acpi_ex_resolve_multiple: Unknown Reference subtype %X\n", obj_desc->reference.opcode));
+			ACPI_ERROR((AE_INFO,
+				    "Unknown Reference subtype %X",
+				    obj_desc->reference.opcode));
 			return_ACPI_STATUS(AE_AML_INTERNAL);
 		}
 	}

drivers/acpi/executer/exresop.c

@@ -6,7 +6,7 @@
  *****************************************************************************/
 
 /*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -46,6 +46,7 @@
 #include <acpi/amlcode.h>
 #include <acpi/acparser.h>
 #include <acpi/acinterp.h>
+#include <acpi/acnamesp.h>
 
 #define _COMPONENT          ACPI_EXECUTER
 ACPI_MODULE_NAME("exresop")
@@ -73,7 +74,7 @@ static acpi_status
 acpi_ex_check_object_type(acpi_object_type type_needed,
 			  acpi_object_type this_type, void *object)
 {
-	ACPI_FUNCTION_NAME("ex_check_object_type");
+	ACPI_FUNCTION_ENTRY();
 
 	if (type_needed == ACPI_TYPE_ANY) {
 		/* All types OK, so we don't perform any typechecks */
@@ -95,10 +96,10 @@ acpi_ex_check_object_type(acpi_object_type type_needed,
 	}
 
 	if (type_needed != this_type) {
-		ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-				  "Needed [%s], found [%s] %p\n",
-				  acpi_ut_get_type_name(type_needed),
-				  acpi_ut_get_type_name(this_type), object));
+		ACPI_ERROR((AE_INFO,
+			    "Needed type [%s], found [%s] %p",
+			    acpi_ut_get_type_name(type_needed),
+			    acpi_ut_get_type_name(this_type), object));
 
 		return (AE_AML_OPERAND_TYPE);
 	}
@@ -151,13 +152,13 @@ acpi_ex_resolve_operands(u16 opcode,
 
 	arg_types = op_info->runtime_args;
 	if (arg_types == ARGI_INVALID_OPCODE) {
-		ACPI_REPORT_ERROR(("resolve_operands: %X is not a valid AML opcode\n", opcode));
+		ACPI_ERROR((AE_INFO, "Unknown AML opcode %X", opcode));
 
 		return_ACPI_STATUS(AE_AML_INTERNAL);
 	}
 
 	ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
-			  "Opcode %X [%s] required_operand_types=%8.8X \n",
+			  "Opcode %X [%s] required_operand_types=%8.8X\n",
 			  opcode, op_info->name, arg_types));
 
 	/*
@@ -169,7 +170,8 @@ acpi_ex_resolve_operands(u16 opcode,
 	 */
 	while (GET_CURRENT_ARG_TYPE(arg_types)) {
 		if (!stack_ptr || !*stack_ptr) {
-			ACPI_REPORT_ERROR(("resolve_operands: Null stack entry at %p\n", stack_ptr));
+			ACPI_ERROR((AE_INFO, "Null stack entry at %p",
+				    stack_ptr));
 
 			return_ACPI_STATUS(AE_AML_INTERNAL);
 		}
@@ -187,6 +189,22 @@ acpi_ex_resolve_operands(u16 opcode,
 
 			object_type =
 			    ((struct acpi_namespace_node *)obj_desc)->type;
+
+			/*
+			 * Resolve an alias object. The construction of these objects
+			 * guarantees that there is only one level of alias indirection;
+			 * thus, the attached object is always the aliased namespace node
+			 */
+			if (object_type == ACPI_TYPE_LOCAL_ALIAS) {
+				obj_desc =
+				    acpi_ns_get_attached_object((struct
+								 acpi_namespace_node
+								 *)obj_desc);
+				*stack_ptr = obj_desc;
+				object_type =
+				    ((struct acpi_namespace_node *)obj_desc)->
+				    type;
+			}
 			break;
 
 		case ACPI_DESC_TYPE_OPERAND:
@@ -198,9 +216,9 @@ acpi_ex_resolve_operands(u16 opcode,
 			/* Check for bad acpi_object_type */
 
 			if (!acpi_ut_valid_object_type(object_type)) {
-				ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-						  "Bad operand object type [%X]\n",
-						  object_type));
+				ACPI_ERROR((AE_INFO,
+					    "Bad operand object type [%X]",
+					    object_type));
 
 				return_ACPI_STATUS(AE_AML_OPERAND_TYPE);
 			}
@@ -238,13 +256,10 @@ acpi_ex_resolve_operands(u16 opcode,
 					break;
 
 				default:
-					ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-							  "Operand is a Reference, Unknown Reference Opcode %X [%s]\n",
-							  obj_desc->reference.
-							  opcode,
-							  (acpi_ps_get_opcode_info
-							   (obj_desc->reference.
-							    opcode))->name));
+					ACPI_ERROR((AE_INFO,
+						    "Operand is a Reference, Unknown Reference Opcode: %X",
+						    obj_desc->reference.
+						    opcode));
 
 					return_ACPI_STATUS(AE_AML_OPERAND_TYPE);
 				}
@@ -255,11 +270,10 @@ acpi_ex_resolve_operands(u16 opcode,
 
 			/* Invalid descriptor */
 
-			ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-					  "Invalid descriptor %p [%s]\n",
-					  obj_desc,
-					  acpi_ut_get_descriptor_name
-					  (obj_desc)));
+			ACPI_ERROR((AE_INFO,
+				    "Invalid descriptor %p [%s]",
+				    obj_desc,
+				    acpi_ut_get_descriptor_name(obj_desc)));
 
 			return_ACPI_STATUS(AE_AML_OPERAND_TYPE);
 		}
@@ -417,11 +431,10 @@ acpi_ex_resolve_operands(u16 opcode,
 			    acpi_ex_convert_to_integer(obj_desc, stack_ptr, 16);
 			if (ACPI_FAILURE(status)) {
 				if (status == AE_TYPE) {
-					ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-							  "Needed [Integer/String/Buffer], found [%s] %p\n",
-							  acpi_ut_get_object_type_name
-							  (obj_desc),
-							  obj_desc));
+					ACPI_ERROR((AE_INFO,
+						    "Needed [Integer/String/Buffer], found [%s] %p",
+						    acpi_ut_get_object_type_name
+						    (obj_desc), obj_desc));
 
 					return_ACPI_STATUS(AE_AML_OPERAND_TYPE);
 				}
@@ -444,11 +457,10 @@ acpi_ex_resolve_operands(u16 opcode,
 			status = acpi_ex_convert_to_buffer(obj_desc, stack_ptr);
 			if (ACPI_FAILURE(status)) {
 				if (status == AE_TYPE) {
-					ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-							  "Needed [Integer/String/Buffer], found [%s] %p\n",
-							  acpi_ut_get_object_type_name
-							  (obj_desc),
-							  obj_desc));
+					ACPI_ERROR((AE_INFO,
+						    "Needed [Integer/String/Buffer], found [%s] %p",
+						    acpi_ut_get_object_type_name
+						    (obj_desc), obj_desc));
 
 					return_ACPI_STATUS(AE_AML_OPERAND_TYPE);
 				}
@@ -472,11 +484,10 @@ acpi_ex_resolve_operands(u16 opcode,
 							   ACPI_IMPLICIT_CONVERT_HEX);
 			if (ACPI_FAILURE(status)) {
 				if (status == AE_TYPE) {
-					ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-							  "Needed [Integer/String/Buffer], found [%s] %p\n",
-							  acpi_ut_get_object_type_name
-							  (obj_desc),
-							  obj_desc));
+					ACPI_ERROR((AE_INFO,
+						    "Needed [Integer/String/Buffer], found [%s] %p",
+						    acpi_ut_get_object_type_name
+						    (obj_desc), obj_desc));
 
 					return_ACPI_STATUS(AE_AML_OPERAND_TYPE);
 				}
@@ -502,10 +513,10 @@ acpi_ex_resolve_operands(u16 opcode,
 				break;
 
 			default:
-				ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-						  "Needed [Integer/String/Buffer], found [%s] %p\n",
-						  acpi_ut_get_object_type_name
-						  (obj_desc), obj_desc));
+				ACPI_ERROR((AE_INFO,
+					    "Needed [Integer/String/Buffer], found [%s] %p",
+					    acpi_ut_get_object_type_name
+					    (obj_desc), obj_desc));
 
 				return_ACPI_STATUS(AE_AML_OPERAND_TYPE);
 			}
@@ -539,10 +550,10 @@ acpi_ex_resolve_operands(u16 opcode,
 				break;
 
 			default:
-				ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-						  "Needed [Integer/String/Buffer], found [%s] %p\n",
-						  acpi_ut_get_object_type_name
-						  (obj_desc), obj_desc));
+				ACPI_ERROR((AE_INFO,
+					    "Needed [Integer/String/Buffer], found [%s] %p",
+					    acpi_ut_get_object_type_name
+					    (obj_desc), obj_desc));
 
 				return_ACPI_STATUS(AE_AML_OPERAND_TYPE);
 			}
@@ -566,10 +577,10 @@ acpi_ex_resolve_operands(u16 opcode,
 				break;
 
 			default:
-				ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-						  "Needed [Buffer/String/Package/Reference], found [%s] %p\n",
-						  acpi_ut_get_object_type_name
-						  (obj_desc), obj_desc));
+				ACPI_ERROR((AE_INFO,
+					    "Needed [Buffer/String/Package/Reference], found [%s] %p",
+					    acpi_ut_get_object_type_name
+					    (obj_desc), obj_desc));
 
 				return_ACPI_STATUS(AE_AML_OPERAND_TYPE);
 			}
@@ -588,10 +599,10 @@ acpi_ex_resolve_operands(u16 opcode,
 				break;
 
 			default:
-				ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-						  "Needed [Buffer/String/Package], found [%s] %p\n",
-						  acpi_ut_get_object_type_name
-						  (obj_desc), obj_desc));
+				ACPI_ERROR((AE_INFO,
+					    "Needed [Buffer/String/Package], found [%s] %p",
+					    acpi_ut_get_object_type_name
+					    (obj_desc), obj_desc));
 
 				return_ACPI_STATUS(AE_AML_OPERAND_TYPE);
 			}
@@ -611,10 +622,10 @@ acpi_ex_resolve_operands(u16 opcode,
 				break;
 
 			default:
-				ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-						  "Needed [Region/region_field], found [%s] %p\n",
-						  acpi_ut_get_object_type_name
-						  (obj_desc), obj_desc));
+				ACPI_ERROR((AE_INFO,
+					    "Needed [Region/region_field], found [%s] %p",
+					    acpi_ut_get_object_type_name
+					    (obj_desc), obj_desc));
 
 				return_ACPI_STATUS(AE_AML_OPERAND_TYPE);
 			}
@@ -656,10 +667,10 @@ acpi_ex_resolve_operands(u16 opcode,
 					break;
 				}
 
-				ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-						  "Needed Integer/Buffer/String/Package/Ref/Ddb], found [%s] %p\n",
-						  acpi_ut_get_object_type_name
-						  (obj_desc), obj_desc));
+				ACPI_ERROR((AE_INFO,
+					    "Needed Integer/Buffer/String/Package/Ref/Ddb], found [%s] %p",
+					    acpi_ut_get_object_type_name
+					    (obj_desc), obj_desc));
 
 				return_ACPI_STATUS(AE_AML_OPERAND_TYPE);
 			}
@@ -669,9 +680,9 @@ acpi_ex_resolve_operands(u16 opcode,
 
 			/* Unknown type */
 
-			ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-					  "Internal - Unknown ARGI (required operand) type %X\n",
-					  this_arg_type));
+			ACPI_ERROR((AE_INFO,
+				    "Internal - Unknown ARGI (required operand) type %X",
+				    this_arg_type));
 
 			return_ACPI_STATUS(AE_BAD_PARAMETER);
 		}

drivers/acpi/executer/exstore.c

@@ -6,7 +6,7 @@
  *****************************************************************************/
 
 /*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -250,7 +250,7 @@ acpi_ex_store(union acpi_operand_object *source_desc,
 	/* Validate parameters */
 
 	if (!source_desc || !dest_desc) {
-		ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Null parameter\n"));
+		ACPI_ERROR((AE_INFO, "Null parameter"));
 		return_ACPI_STATUS(AE_AML_NO_OPERAND);
 	}
 
@@ -290,10 +290,10 @@ acpi_ex_store(union acpi_operand_object *source_desc,
 
 		/* Destination is not a Reference object */
 
-		ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-				  "Target is not a Reference or Constant object - %s [%p]\n",
-				  acpi_ut_get_object_type_name(dest_desc),
-				  dest_desc));
+		ACPI_ERROR((AE_INFO,
+			    "Target is not a Reference or Constant object - %s [%p]",
+			    acpi_ut_get_object_type_name(dest_desc),
+			    dest_desc));
 
 		ACPI_DUMP_STACK_ENTRY(source_desc);
 		ACPI_DUMP_STACK_ENTRY(dest_desc);
@@ -360,8 +360,8 @@ acpi_ex_store(union acpi_operand_object *source_desc,
 
 	default:
 
-		ACPI_REPORT_ERROR(("ex_store: Unknown Reference opcode %X\n",
-				   ref_desc->reference.opcode));
+		ACPI_ERROR((AE_INFO, "Unknown Reference opcode %X",
+			    ref_desc->reference.opcode));
 		ACPI_DUMP_ENTRY(ref_desc, ACPI_LV_ERROR);
 
 		status = AE_AML_INTERNAL;
@@ -490,10 +490,9 @@ acpi_ex_store_object_to_index(union acpi_operand_object *source_desc,
 
 			/* All other types are invalid */
 
-			ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-					  "Source must be Integer/Buffer/String type, not %s\n",
-					  acpi_ut_get_object_type_name
-					  (source_desc)));
+			ACPI_ERROR((AE_INFO,
+				    "Source must be Integer/Buffer/String type, not %s",
+				    acpi_ut_get_object_type_name(source_desc)));
 			return_ACPI_STATUS(AE_AML_OPERAND_TYPE);
 		}
 
@@ -503,8 +502,8 @@ acpi_ex_store_object_to_index(union acpi_operand_object *source_desc,
 		break;
 
 	default:
-		ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-				  "Target is not a Package or buffer_field\n"));
+		ACPI_ERROR((AE_INFO,
+			    "Target is not a Package or buffer_field"));
 		status = AE_AML_OPERAND_TYPE;
 		break;
 	}

drivers/acpi/executer/exstoren.c

@@ -7,7 +7,7 @@
  *****************************************************************************/
 
 /*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -123,11 +123,10 @@ acpi_ex_resolve_object(union acpi_operand_object **source_desc_ptr,
 		      && (source_desc->reference.opcode == AML_LOAD_OP))) {
 			/* Conversion successful but still not a valid type */
 
-			ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-					  "Cannot assign type %s to %s (must be type Int/Str/Buf)\n",
-					  acpi_ut_get_object_type_name
-					  (source_desc),
-					  acpi_ut_get_type_name(target_type)));
+			ACPI_ERROR((AE_INFO,
+				    "Cannot assign type %s to %s (must be type Int/Str/Buf)",
+				    acpi_ut_get_object_type_name(source_desc),
+				    acpi_ut_get_type_name(target_type)));
 			status = AE_AML_OPERAND_TYPE;
 		}
 		break;
@@ -135,9 +134,11 @@ acpi_ex_resolve_object(union acpi_operand_object **source_desc_ptr,
 	case ACPI_TYPE_LOCAL_ALIAS:
 	case ACPI_TYPE_LOCAL_METHOD_ALIAS:
 
-		/* Aliases are resolved by acpi_ex_prep_operands */
-
-		ACPI_REPORT_ERROR(("Store into Alias - should never happen\n"));
+		/*
+		 * All aliases should have been resolved earlier, during the
+		 * operand resolution phase.
+		 */
+		ACPI_ERROR((AE_INFO, "Store into an unresolved Alias object"));
 		status = AE_AML_INTERNAL;
 		break;
 
@@ -280,9 +281,8 @@ acpi_ex_store_object_to_object(union acpi_operand_object *source_desc,
 		/*
 		 * All other types come here.
 		 */
-		ACPI_DEBUG_PRINT((ACPI_DB_WARN,
-				  "Store into type %s not implemented\n",
-				  acpi_ut_get_object_type_name(dest_desc)));
+		ACPI_WARNING((AE_INFO, "Store into type %s not implemented",
+			      acpi_ut_get_object_type_name(dest_desc)));
 
 		status = AE_NOT_IMPLEMENTED;
 		break;

drivers/acpi/executer/exstorob.c

@@ -6,7 +6,7 @@
  *****************************************************************************/
 
 /*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -71,7 +71,7 @@ acpi_ex_store_buffer_to_buffer(union acpi_operand_object *source_desc,
 
 	/* We know that source_desc is a buffer by now */
 
-	buffer = (u8 *) source_desc->buffer.pointer;
+	buffer = ACPI_CAST_PTR(u8, source_desc->buffer.pointer);
 	length = source_desc->buffer.length;
 
 	/*
@@ -160,7 +160,7 @@ acpi_ex_store_string_to_string(union acpi_operand_object *source_desc,
 
 	/* We know that source_desc is a string by now */
 
-	buffer = (u8 *) source_desc->string.pointer;
+	buffer = ACPI_CAST_PTR(u8, source_desc->string.pointer);
 	length = source_desc->string.length;
 
 	/*

drivers/acpi/executer/exsystem.c

@@ -6,7 +6,7 @@
  *****************************************************************************/
 
 /*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -129,8 +129,8 @@ acpi_status acpi_ex_system_do_stall(u32 how_long)
 		 * (ACPI specifies 100 usec as max, but this gives some slack in
 		 * order to support existing BIOSs)
 		 */
-		ACPI_REPORT_ERROR(("Stall: Time parameter is too large (%d)\n",
-				   how_long));
+		ACPI_ERROR((AE_INFO, "Time parameter is too large (%d)",
+			    how_long));
 		status = AE_AML_OPERAND_VALUE;
 	} else {
 		acpi_os_stall(how_long);

drivers/acpi/executer/exutils.c

@@ -6,7 +6,7 @@
  *****************************************************************************/
 
 /*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -91,7 +91,7 @@ acpi_status acpi_ex_enter_interpreter(void)
 
 	status = acpi_ut_acquire_mutex(ACPI_MTX_EXECUTE);
 	if (ACPI_FAILURE(status)) {
-		ACPI_REPORT_ERROR(("Could not acquire interpreter mutex\n"));
+		ACPI_ERROR((AE_INFO, "Could not acquire interpreter mutex"));
 	}
 
 	return_ACPI_STATUS(status);
@@ -127,7 +127,7 @@ void acpi_ex_exit_interpreter(void)
 
 	status = acpi_ut_release_mutex(ACPI_MTX_EXECUTE);
 	if (ACPI_FAILURE(status)) {
-		ACPI_REPORT_ERROR(("Could not release interpreter mutex\n"));
+		ACPI_ERROR((AE_INFO, "Could not release interpreter mutex"));
 	}
 
 	return_VOID;
@@ -200,13 +200,12 @@ u8 acpi_ex_acquire_global_lock(u32 field_flags)
 		if (ACPI_SUCCESS(status)) {
 			locked = TRUE;
 		} else {
-			ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-					  "Could not acquire Global Lock, %s\n",
-					  acpi_format_exception(status)));
+			ACPI_EXCEPTION((AE_INFO, status,
+					"Could not acquire Global Lock"));
 		}
 	}
 
-	return_VALUE(locked);
+	return_UINT8(locked);
 }
 
 /*******************************************************************************
@@ -237,7 +236,8 @@ void acpi_ex_release_global_lock(u8 locked_by_me)
 		if (ACPI_FAILURE(status)) {
 			/* Report the error, but there isn't much else we can do */
 
-			ACPI_REPORT_ERROR(("Could not release ACPI Global Lock, %s\n", acpi_format_exception(status)));
+			ACPI_EXCEPTION((AE_INFO, status,
+					"Could not release ACPI Global Lock"));
 		}
 	}
 
@@ -268,7 +268,7 @@ static u32 acpi_ex_digits_needed(acpi_integer value, u32 base)
 	/* acpi_integer is unsigned, so we don't worry about a '-' prefix */
 
 	if (value == 0) {
-		return_VALUE(1);
+		return_UINT32(1);
 	}
 
 	current_value = value;
@@ -282,7 +282,7 @@ static u32 acpi_ex_digits_needed(acpi_integer value, u32 base)
 		num_digits++;
 	}
 
-	return_VALUE(num_digits);
+	return_UINT32(num_digits);
 }
 
 /*******************************************************************************

drivers/acpi/glue.c

@@ -99,15 +99,15 @@ do_root_bridge_busnr_callback(struct acpi_resource *resource, void *data)
 	unsigned long *busnr = (unsigned long *)data;
 	struct acpi_resource_address64 address;
 
-	if (resource->id != ACPI_RSTYPE_ADDRESS16 &&
-	    resource->id != ACPI_RSTYPE_ADDRESS32 &&
-	    resource->id != ACPI_RSTYPE_ADDRESS64)
+	if (resource->type != ACPI_RESOURCE_TYPE_ADDRESS16 &&
+	    resource->type != ACPI_RESOURCE_TYPE_ADDRESS32 &&
+	    resource->type != ACPI_RESOURCE_TYPE_ADDRESS64)
 		return AE_OK;
 
 	acpi_resource_to_address64(resource, &address);
 	if ((address.address_length > 0) &&
 	    (address.resource_type == ACPI_BUS_NUMBER_RANGE))
-		*busnr = address.min_address_range;
+		*busnr = address.minimum;
 
 	return AE_OK;
 }

drivers/acpi/hardware/hwacpi.c

@@ -6,7 +6,7 @@
  *****************************************************************************/
 
 /*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -68,8 +68,7 @@ acpi_status acpi_hw_initialize(void)
 	/* We must have the ACPI tables by the time we get here */
 
 	if (!acpi_gbl_FADT) {
-		ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "No FADT is present\n"));
-
+		ACPI_ERROR((AE_INFO, "No FADT is present"));
 		return_ACPI_STATUS(AE_NO_ACPI_TABLES);
 	}
 
@@ -108,7 +107,8 @@ acpi_status acpi_hw_set_mode(u32 mode)
 	 * system does not support mode transition.
 	 */
 	if (!acpi_gbl_FADT->smi_cmd) {
-		ACPI_REPORT_ERROR(("No SMI_CMD in FADT, mode transition failed.\n"));
+		ACPI_ERROR((AE_INFO,
+			    "No SMI_CMD in FADT, mode transition failed"));
 		return_ACPI_STATUS(AE_NO_HARDWARE_RESPONSE);
 	}
 
@@ -120,7 +120,8 @@ acpi_status acpi_hw_set_mode(u32 mode)
 	 * transitions are not supported.
 	 */
 	if (!acpi_gbl_FADT->acpi_enable && !acpi_gbl_FADT->acpi_disable) {
-		ACPI_REPORT_ERROR(("No ACPI mode transition supported in this system (enable/disable both zero)\n"));
+		ACPI_ERROR((AE_INFO,
+			    "No ACPI mode transition supported in this system (enable/disable both zero)"));
 		return_ACPI_STATUS(AE_OK);
 	}
 
@@ -154,8 +155,8 @@ acpi_status acpi_hw_set_mode(u32 mode)
 	}
 
 	if (ACPI_FAILURE(status)) {
-		ACPI_REPORT_ERROR(("Could not write mode change, %s\n",
-				   acpi_format_exception(status)));
+		ACPI_EXCEPTION((AE_INFO, status,
+				"Could not write ACPI mode change"));
 		return_ACPI_STATUS(status);
 	}
 
@@ -175,7 +176,7 @@ acpi_status acpi_hw_set_mode(u32 mode)
 		retry--;
 	}
 
-	ACPI_REPORT_ERROR(("Hardware never changed modes\n"));
+	ACPI_ERROR((AE_INFO, "Hardware did not change modes"));
 	return_ACPI_STATUS(AE_NO_HARDWARE_RESPONSE);
 }
 
@@ -204,18 +205,18 @@ u32 acpi_hw_get_mode(void)
 	 * system does not support mode transition.
 	 */
 	if (!acpi_gbl_FADT->smi_cmd) {
-		return_VALUE(ACPI_SYS_MODE_ACPI);
+		return_UINT32(ACPI_SYS_MODE_ACPI);
 	}
 
 	status =
 	    acpi_get_register(ACPI_BITREG_SCI_ENABLE, &value, ACPI_MTX_LOCK);
 	if (ACPI_FAILURE(status)) {
-		return_VALUE(ACPI_SYS_MODE_LEGACY);
+		return_UINT32(ACPI_SYS_MODE_LEGACY);
 	}
 
 	if (value) {
-		return_VALUE(ACPI_SYS_MODE_ACPI);
+		return_UINT32(ACPI_SYS_MODE_ACPI);
 	} else {
-		return_VALUE(ACPI_SYS_MODE_LEGACY);
+		return_UINT32(ACPI_SYS_MODE_LEGACY);
 	}
 }

drivers/acpi/hardware/hwgpe.c

@@ -6,7 +6,7 @@
  *****************************************************************************/
 
 /*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without

drivers/acpi/hardware/hwregs.c

@@ -7,7 +7,7 @@
  ******************************************************************************/
 
 /*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -144,7 +144,8 @@ acpi_get_sleep_type_data(u8 sleep_state, u8 * sleep_type_a, u8 * sleep_type_b)
 
 	info.parameters = NULL;
 	info.return_object = NULL;
-	sleep_state_name = (char *)acpi_gbl_sleep_state_names[sleep_state];
+	sleep_state_name =
+	    ACPI_CAST_PTR(char, acpi_gbl_sleep_state_names[sleep_state]);
 
 	status = acpi_ns_evaluate_by_name(sleep_state_name, &info);
 	if (ACPI_FAILURE(status)) {
@@ -159,15 +160,16 @@ acpi_get_sleep_type_data(u8 sleep_state, u8 * sleep_type_a, u8 * sleep_type_b)
 	/* Must have a return object */
 
 	if (!info.return_object) {
-		ACPI_REPORT_ERROR(("No Sleep State object returned from [%s]\n",
-				   sleep_state_name));
+		ACPI_ERROR((AE_INFO, "No Sleep State object returned from [%s]",
+			    sleep_state_name));
 		status = AE_NOT_EXIST;
 	}
 
 	/* It must be of type Package */
 
 	else if (ACPI_GET_OBJECT_TYPE(info.return_object) != ACPI_TYPE_PACKAGE) {
-		ACPI_REPORT_ERROR(("Sleep State return object is not a Package\n"));
+		ACPI_ERROR((AE_INFO,
+			    "Sleep State return object is not a Package"));
 		status = AE_AML_OPERAND_TYPE;
 	}
 
@@ -179,7 +181,8 @@ acpi_get_sleep_type_data(u8 sleep_state, u8 * sleep_type_a, u8 * sleep_type_b)
 	 * one per sleep type (A/B).
 	 */
 	else if (info.return_object->package.count < 2) {
-		ACPI_REPORT_ERROR(("Sleep State return package does not have at least two elements\n"));
+		ACPI_ERROR((AE_INFO,
+			    "Sleep State return package does not have at least two elements"));
 		status = AE_AML_NO_OPERAND;
 	}
 
@@ -189,7 +192,12 @@ acpi_get_sleep_type_data(u8 sleep_state, u8 * sleep_type_a, u8 * sleep_type_b)
 		  != ACPI_TYPE_INTEGER) ||
 		 (ACPI_GET_OBJECT_TYPE(info.return_object->package.elements[1])
 		  != ACPI_TYPE_INTEGER)) {
-		ACPI_REPORT_ERROR(("Sleep State return package elements are not both Integers (%s, %s)\n", acpi_ut_get_object_type_name(info.return_object->package.elements[0]), acpi_ut_get_object_type_name(info.return_object->package.elements[1])));
+		ACPI_ERROR((AE_INFO,
+			    "Sleep State return package elements are not both Integers (%s, %s)",
+			    acpi_ut_get_object_type_name(info.return_object->
+							 package.elements[0]),
+			    acpi_ut_get_object_type_name(info.return_object->
+							 package.elements[1])));
 		status = AE_AML_OPERAND_TYPE;
 	} else {
 		/* Valid _Sx_ package size, type, and value */
@@ -201,12 +209,11 @@ acpi_get_sleep_type_data(u8 sleep_state, u8 * sleep_type_a, u8 * sleep_type_b)
 	}
 
 	if (ACPI_FAILURE(status)) {
-		ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-				  "%s While evaluating sleep_state [%s], bad Sleep object %p type %s\n",
-				  acpi_format_exception(status),
-				  sleep_state_name, info.return_object,
-				  acpi_ut_get_object_type_name(info.
-							       return_object)));
+		ACPI_EXCEPTION((AE_INFO, status,
+				"While evaluating sleep_state [%s], bad Sleep object %p type %s",
+				sleep_state_name, info.return_object,
+				acpi_ut_get_object_type_name(info.
+							     return_object)));
 	}
 
 	acpi_ut_remove_reference(info.return_object);
@@ -229,12 +236,11 @@ EXPORT_SYMBOL(acpi_get_sleep_type_data);
 
 struct acpi_bit_register_info *acpi_hw_get_bit_register_info(u32 register_id)
 {
-	ACPI_FUNCTION_NAME("hw_get_bit_register_info");
+	ACPI_FUNCTION_ENTRY();
 
 	if (register_id > ACPI_BITREG_MAX) {
-		ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-				  "Invalid bit_register ID: %X\n",
-				  register_id));
+		ACPI_ERROR((AE_INFO, "Invalid bit_register ID: %X",
+			    register_id));
 		return (NULL);
 	}
 
@@ -334,8 +340,8 @@ acpi_status acpi_set_register(u32 register_id, u32 value, u32 flags)
 
 	bit_reg_info = acpi_hw_get_bit_register_info(register_id);
 	if (!bit_reg_info) {
-		ACPI_REPORT_ERROR(("Bad ACPI HW register_id: %X\n",
-				   register_id));
+		ACPI_ERROR((AE_INFO, "Bad ACPI HW register_id: %X",
+			    register_id));
 		return_ACPI_STATUS(AE_BAD_PARAMETER);
 	}
 
@@ -569,8 +575,7 @@ acpi_hw_register_read(u8 use_lock, u32 register_id, u32 * return_value)
 		break;
 
 	default:
-		ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Unknown Register ID: %X\n",
-				  register_id));
+		ACPI_ERROR((AE_INFO, "Unknown Register ID: %X", register_id));
 		status = AE_BAD_PARAMETER;
 		break;
 	}
@@ -765,9 +770,9 @@ acpi_hw_low_level_read(u32 width, u32 * value, struct acpi_generic_address *reg)
 		break;
 
 	default:
-		ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-				  "Unsupported address space: %X\n",
-				  reg->address_space_id));
+		ACPI_ERROR((AE_INFO,
+			    "Unsupported address space: %X",
+			    reg->address_space_id));
 		return (AE_BAD_PARAMETER);
 	}
 
@@ -836,9 +841,9 @@ acpi_hw_low_level_write(u32 width, u32 value, struct acpi_generic_address * reg)
 		break;
 
 	default:
-		ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-				  "Unsupported address space: %X\n",
-				  reg->address_space_id));
+		ACPI_ERROR((AE_INFO,
+			    "Unsupported address space: %X",
+			    reg->address_space_id));
 		return (AE_BAD_PARAMETER);
 	}
 

drivers/acpi/hardware/hwsleep.c

@@ -6,7 +6,7 @@
  *****************************************************************************/
 
 /*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -199,8 +199,8 @@ acpi_status acpi_enter_sleep_state_prep(u8 sleep_state)
 
 	status = acpi_evaluate_object(NULL, METHOD_NAME__SST, &arg_list, NULL);
 	if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) {
-		ACPI_REPORT_ERROR(("Method _SST failed, %s\n",
-				   acpi_format_exception(status)));
+		ACPI_EXCEPTION((AE_INFO, status,
+				"While executing method _SST"));
 	}
 
 	return_ACPI_STATUS(AE_OK);
@@ -232,9 +232,8 @@ acpi_status asmlinkage acpi_enter_sleep_state(u8 sleep_state)
 
 	if ((acpi_gbl_sleep_type_a > ACPI_SLEEP_TYPE_MAX) ||
 	    (acpi_gbl_sleep_type_b > ACPI_SLEEP_TYPE_MAX)) {
-		ACPI_REPORT_ERROR(("Sleep values out of range: A=%X B=%X\n",
-				   acpi_gbl_sleep_type_a,
-				   acpi_gbl_sleep_type_b));
+		ACPI_ERROR((AE_INFO, "Sleep values out of range: A=%X B=%X",
+			    acpi_gbl_sleep_type_a, acpi_gbl_sleep_type_b));
 		return_ACPI_STATUS(AE_AML_OPERAND_VALUE);
 	}
 
@@ -533,21 +532,18 @@ acpi_status acpi_leave_sleep_state(u8 sleep_state)
 	arg.integer.value = ACPI_SST_WAKING;
 	status = acpi_evaluate_object(NULL, METHOD_NAME__SST, &arg_list, NULL);
 	if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) {
-		ACPI_REPORT_ERROR(("Method _SST failed, %s\n",
-				   acpi_format_exception(status)));
+		ACPI_EXCEPTION((AE_INFO, status, "During Method _SST"));
 	}
 
 	arg.integer.value = sleep_state;
 	status = acpi_evaluate_object(NULL, METHOD_NAME__BFS, &arg_list, NULL);
 	if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) {
-		ACPI_REPORT_ERROR(("Method _BFS failed, %s\n",
-				   acpi_format_exception(status)));
+		ACPI_EXCEPTION((AE_INFO, status, "During Method _BFS"));
 	}
 
 	status = acpi_evaluate_object(NULL, METHOD_NAME__WAK, &arg_list, NULL);
 	if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) {
-		ACPI_REPORT_ERROR(("Method _WAK failed, %s\n",
-				   acpi_format_exception(status)));
+		ACPI_EXCEPTION((AE_INFO, status, "During Method _WAK"));
 	}
 	/* TBD: _WAK "sometimes" returns stuff - do we want to look at it? */
 
@@ -582,8 +578,7 @@ acpi_status acpi_leave_sleep_state(u8 sleep_state)
 	arg.integer.value = ACPI_SST_WORKING;
 	status = acpi_evaluate_object(NULL, METHOD_NAME__SST, &arg_list, NULL);
 	if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) {
-		ACPI_REPORT_ERROR(("Method _SST failed, %s\n",
-				   acpi_format_exception(status)));
+		ACPI_EXCEPTION((AE_INFO, status, "During Method _SST"));
 	}
 
 	return_ACPI_STATUS(status);

drivers/acpi/hardware/hwtimer.c

@@ -6,7 +6,7 @@
  *****************************************************************************/
 
 /*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without

drivers/acpi/motherboard.c

@@ -54,36 +54,36 @@ static acpi_status acpi_reserve_io_ranges(struct acpi_resource *res, void *data)
 
 	ACPI_FUNCTION_TRACE("acpi_reserve_io_ranges");
 
-	if (res->id == ACPI_RSTYPE_IO) {
+	if (res->type == ACPI_RESOURCE_TYPE_IO) {
 		struct acpi_resource_io *io_res = &res->data.io;
 
-		if (io_res->min_base_address != io_res->max_base_address)
+		if (io_res->minimum != io_res->maximum)
 			return_VALUE(AE_OK);
 		if (IS_RESERVED_ADDR
-		    (io_res->min_base_address, io_res->range_length)) {
+		    (io_res->minimum, io_res->address_length)) {
 			ACPI_DEBUG_PRINT((ACPI_DB_INFO,
 					  "Motherboard resources 0x%08x - 0x%08x\n",
-					  io_res->min_base_address,
-					  io_res->min_base_address +
-					  io_res->range_length));
+					  io_res->minimum,
+					  io_res->minimum +
+					  io_res->address_length));
 			requested_res =
-			    request_region(io_res->min_base_address,
-					   io_res->range_length, "motherboard");
+			    request_region(io_res->minimum,
+					   io_res->address_length, "motherboard");
 		}
-	} else if (res->id == ACPI_RSTYPE_FIXED_IO) {
+	} else if (res->type == ACPI_RESOURCE_TYPE_FIXED_IO) {
 		struct acpi_resource_fixed_io *fixed_io_res =
 		    &res->data.fixed_io;
 
 		if (IS_RESERVED_ADDR
-		    (fixed_io_res->base_address, fixed_io_res->range_length)) {
+		    (fixed_io_res->address, fixed_io_res->address_length)) {
 			ACPI_DEBUG_PRINT((ACPI_DB_INFO,
 					  "Motherboard resources 0x%08x - 0x%08x\n",
-					  fixed_io_res->base_address,
-					  fixed_io_res->base_address +
-					  fixed_io_res->range_length));
+					  fixed_io_res->address,
+					  fixed_io_res->address +
+					  fixed_io_res->address_length));
 			requested_res =
-			    request_region(fixed_io_res->base_address,
-					   fixed_io_res->range_length,
+			    request_region(fixed_io_res->address,
+					   fixed_io_res->address_length,
 					   "motherboard");
 		}
 	} else {

drivers/acpi/namespace/nsaccess.c

@@ -5,7 +5,7 @@
  ******************************************************************************/
 
 /*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -110,10 +110,9 @@ acpi_status acpi_ns_root_initialize(void)
 					ACPI_NS_NO_UPSEARCH, NULL, &new_node);
 
 		if (ACPI_FAILURE(status) || (!new_node)) {	/* Must be on same line for code converter */
-			ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-					  "Could not create predefined name %s, %s\n",
-					  init_val->name,
-					  acpi_format_exception(status)));
+			ACPI_EXCEPTION((AE_INFO, status,
+					"Could not create predefined name %s",
+					init_val->name));
 		}
 
 		/*
@@ -124,9 +123,9 @@ acpi_status acpi_ns_root_initialize(void)
 		if (init_val->val) {
 			status = acpi_os_predefined_override(init_val, &val);
 			if (ACPI_FAILURE(status)) {
-				ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-						  "Could not override predefined %s\n",
-						  init_val->name));
+				ACPI_ERROR((AE_INFO,
+					    "Could not override predefined %s",
+					    init_val->name));
 			}
 
 			if (!val) {
@@ -233,7 +232,9 @@ acpi_status acpi_ns_root_initialize(void)
 
 			default:
 
-				ACPI_REPORT_ERROR(("Unsupported initial type value %X\n", init_val->type));
+				ACPI_ERROR((AE_INFO,
+					    "Unsupported initial type value %X",
+					    init_val->type));
 				acpi_ut_remove_reference(obj_desc);
 				obj_desc = NULL;
 				continue;
@@ -339,7 +340,9 @@ acpi_ns_lookup(union acpi_generic_state *scope_info,
 		prefix_node = scope_info->scope.node;
 		if (ACPI_GET_DESCRIPTOR_TYPE(prefix_node) !=
 		    ACPI_DESC_TYPE_NAMED) {
-			ACPI_REPORT_ERROR(("ns_lookup: %p is not a namespace node [%s]\n", prefix_node, acpi_ut_get_descriptor_name(prefix_node)));
+			ACPI_ERROR((AE_INFO, "%p is not a namespace node [%s]",
+				    prefix_node,
+				    acpi_ut_get_descriptor_name(prefix_node)));
 			return_ACPI_STATUS(AE_AML_INTERNAL);
 		}
 
@@ -429,7 +432,8 @@ acpi_ns_lookup(union acpi_generic_state *scope_info,
 				if (!this_node) {
 					/* Current scope has no parent scope */
 
-					ACPI_REPORT_ERROR(("ACPI path has too many parent prefixes (^) - reached beyond root node\n"));
+					ACPI_ERROR((AE_INFO,
+						    "ACPI path has too many parent prefixes (^) - reached beyond root node"));
 					return_ACPI_STATUS(AE_NOT_FOUND);
 				}
 			}
@@ -498,7 +502,7 @@ acpi_ns_lookup(union acpi_generic_state *scope_info,
 			path++;
 
 			ACPI_DEBUG_PRINT((ACPI_DB_NAMES,
-					  "Multi Pathname (%d Segments, Flags=%X) \n",
+					  "Multi Pathname (%d Segments, Flags=%X)\n",
 					  num_segments, flags));
 			break;
 
@@ -600,7 +604,12 @@ acpi_ns_lookup(union acpi_generic_state *scope_info,
 		    (this_node->type != type_to_check_for)) {
 			/* Complain about a type mismatch */
 
-			ACPI_REPORT_WARNING(("ns_lookup: Type mismatch on %4.4s (%s), searching for (%s)\n", (char *)&simple_name, acpi_ut_get_type_name(this_node->type), acpi_ut_get_type_name(type_to_check_for)));
+			ACPI_WARNING((AE_INFO,
+				      "ns_lookup: Type mismatch on %4.4s (%s), searching for (%s)",
+				      ACPI_CAST_PTR(char, &simple_name),
+				      acpi_ut_get_type_name(this_node->type),
+				      acpi_ut_get_type_name
+				      (type_to_check_for)));
 		}
 
 		/*

drivers/acpi/namespace/nsalloc.c

@@ -5,7 +5,7 @@
  ******************************************************************************/
 
 /*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -272,9 +272,8 @@ void acpi_ns_delete_children(struct acpi_namespace_node *parent_node)
 		/* Grandchildren should have all been deleted already */
 
 		if (child_node->child) {
-			ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-					  "Found a grandchild! P=%p C=%p\n",
-					  parent_node, child_node));
+			ACPI_ERROR((AE_INFO, "Found a grandchild! P=%p C=%p",
+				    parent_node, child_node));
 		}
 
 		/* Now we can free this child object */
@@ -302,7 +301,9 @@ void acpi_ns_delete_children(struct acpi_namespace_node *parent_node)
 		/* There should be only one reference remaining on this node */
 
 		if (child_node->reference_count != 1) {
-			ACPI_REPORT_WARNING(("Existing references (%d) on node being deleted (%p)\n", child_node->reference_count, child_node));
+			ACPI_WARNING((AE_INFO,
+				      "Existing references (%d) on node being deleted (%p)",
+				      child_node->reference_count, child_node));
 		}
 
 		/* Now we can delete the node */

drivers/acpi/namespace/nsdump.c

@@ -5,7 +5,7 @@
  *****************************************************************************/
 
 /*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -198,12 +198,13 @@ acpi_ns_dump_one_object(acpi_handle obj_handle,
 		/* Check the node type and name */
 
 		if (type > ACPI_TYPE_LOCAL_MAX) {
-			ACPI_REPORT_WARNING(("Invalid ACPI Type %08X\n", type));
+			ACPI_WARNING((AE_INFO, "Invalid ACPI Object Type %08X",
+				      type));
 		}
 
 		if (!acpi_ut_valid_acpi_name(this_node->name.integer)) {
-			ACPI_REPORT_WARNING(("Invalid ACPI Name %08X\n",
-					     this_node->name.integer));
+			ACPI_WARNING((AE_INFO, "Invalid ACPI Name %08X",
+				      this_node->name.integer));
 		}
 
 		acpi_os_printf("%4.4s", acpi_ut_get_node_name(this_node));
@@ -212,7 +213,9 @@ acpi_ns_dump_one_object(acpi_handle obj_handle,
 	/*
 	 * Now we can print out the pertinent information
 	 */
-	acpi_os_printf(" %-12s %p ", acpi_ut_get_type_name(type), this_node);
+	acpi_os_printf(" %-12s %p %2.2X ",
+		       acpi_ut_get_type_name(type), this_node,
+		       this_node->owner_id);
 
 	dbg_level = acpi_dbg_level;
 	acpi_dbg_level = 0;

drivers/acpi/namespace/nsdumpdv.c

@@ -5,7 +5,7 @@
  *****************************************************************************/
 
 /*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without

drivers/acpi/namespace/nseval.c

@@ -6,7 +6,7 @@
  ******************************************************************************/
 
 /*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -373,8 +373,7 @@ acpi_ns_execute_control_method(struct acpi_parameter_info *info)
 
 	info->obj_desc = acpi_ns_get_attached_object(info->node);
 	if (!info->obj_desc) {
-		ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-				  "No attached method object\n"));
+		ACPI_ERROR((AE_INFO, "No attached method object"));
 
 		(void)acpi_ut_release_mutex(ACPI_MTX_NAMESPACE);
 		return_ACPI_STATUS(AE_NULL_OBJECT);

drivers/acpi/namespace/nsinit.c

@@ -5,7 +5,7 @@
  *****************************************************************************/
 
 /*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -93,8 +93,7 @@ acpi_status acpi_ns_initialize_objects(void)
 				     ACPI_UINT32_MAX, acpi_ns_init_one_object,
 				     &info, NULL);
 	if (ACPI_FAILURE(status)) {
-		ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "walk_namespace failed! %s\n",
-				  acpi_format_exception(status)));
+		ACPI_EXCEPTION((AE_INFO, status, "During walk_namespace"));
 	}
 
 	ACPI_DEBUG_PRINT_RAW((ACPI_DB_INIT,
@@ -159,12 +158,11 @@ acpi_status acpi_ns_initialize_devices(void)
 	(void)acpi_ut_release_mutex(ACPI_MTX_NAMESPACE);
 
 	if (ACPI_FAILURE(status)) {
-		ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "walk_namespace failed! %s\n",
-				  acpi_format_exception(status)));
+		ACPI_EXCEPTION((AE_INFO, status, "During walk_namespace"));
 	}
 
 	ACPI_DEBUG_PRINT_RAW((ACPI_DB_INIT,
-			      "\n%hd Devices found containing: %hd _STA, %hd _INI methods\n",
+			      "\n%hd Devices found - executed %hd _STA, %hd _INI methods\n",
 			      info.device_count, info.num_STA, info.num_INI));
 
 	return_ACPI_STATUS(status);
@@ -289,12 +287,10 @@ acpi_ns_init_one_object(acpi_handle obj_handle,
 	}
 
 	if (ACPI_FAILURE(status)) {
-		ACPI_DEBUG_PRINT_RAW((ACPI_DB_ERROR, "\n"));
-		ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-				  "Could not execute arguments for [%4.4s] (%s), %s\n",
-				  acpi_ut_get_node_name(node),
-				  acpi_ut_get_type_name(type),
-				  acpi_format_exception(status)));
+		ACPI_EXCEPTION((AE_INFO, status,
+				"Could not execute arguments for [%4.4s] (%s)",
+				acpi_ut_get_node_name(node),
+				acpi_ut_get_type_name(type)));
 	}
 
 	/*
@@ -336,23 +332,22 @@ acpi_ns_init_one_device(acpi_handle obj_handle,
 	struct acpi_parameter_info pinfo;
 	u32 flags;
 	acpi_status status;
+	struct acpi_namespace_node *ini_node;
+	struct acpi_namespace_node *device_node;
 
 	ACPI_FUNCTION_TRACE("ns_init_one_device");
 
-	pinfo.parameters = NULL;
-	pinfo.parameter_type = ACPI_PARAM_ARGS;
-
-	pinfo.node = acpi_ns_map_handle_to_node(obj_handle);
-	if (!pinfo.node) {
+	device_node = acpi_ns_map_handle_to_node(obj_handle);
+	if (!device_node) {
 		return_ACPI_STATUS(AE_BAD_PARAMETER);
 	}
 
 	/*
 	 * We will run _STA/_INI on Devices, Processors and thermal_zones only
 	 */
-	if ((pinfo.node->type != ACPI_TYPE_DEVICE) &&
-	    (pinfo.node->type != ACPI_TYPE_PROCESSOR) &&
-	    (pinfo.node->type != ACPI_TYPE_THERMAL)) {
+	if ((device_node->type != ACPI_TYPE_DEVICE) &&
+	    (device_node->type != ACPI_TYPE_PROCESSOR) &&
+	    (device_node->type != ACPI_TYPE_THERMAL)) {
 		return_ACPI_STATUS(AE_OK);
 	}
 
@@ -364,57 +359,69 @@ acpi_ns_init_one_device(acpi_handle obj_handle,
 	info->device_count++;
 
 	/*
-	 * Run _STA to determine if we can run _INI on the device.
+	 * Check if the _INI method exists for this device -
+	 * if _INI does not exist, there is no need to run _STA
+	 * No _INI means device requires no initialization
+	 */
+	status = acpi_ns_search_node(*ACPI_CAST_PTR(u32, METHOD_NAME__INI),
+				     device_node, ACPI_TYPE_METHOD, &ini_node);
+	if (ACPI_FAILURE(status)) {
+		/* No _INI method found - move on to next device */
+
+		return_ACPI_STATUS(AE_OK);
+	}
+
+	/*
+	 * Run _STA to determine if we can run _INI on the device -
+	 * the device must be present before _INI can be run.
+	 * However, _STA is not required - assume device present if no _STA
 	 */
 	ACPI_DEBUG_EXEC(acpi_ut_display_init_pathname(ACPI_TYPE_METHOD,
-						      pinfo.node,
+						      device_node,
 						      METHOD_NAME__STA));
-	status = acpi_ut_execute_STA(pinfo.node, &flags);
 
+	pinfo.node = device_node;
+	pinfo.parameters = NULL;
+	pinfo.parameter_type = ACPI_PARAM_ARGS;
+
+	status = acpi_ut_execute_STA(pinfo.node, &flags);
 	if (ACPI_FAILURE(status)) {
-		if (pinfo.node->type == ACPI_TYPE_DEVICE) {
-			/* Ignore error and move on to next device */
+		/* Ignore error and move on to next device */
 
-			return_ACPI_STATUS(AE_OK);
-		}
+		return_ACPI_STATUS(AE_OK);
+	}
 
-		/* _STA is not required for Processor or thermal_zone objects */
-	} else {
+	if (flags != ACPI_UINT32_MAX) {
 		info->num_STA++;
+	}
 
-		if (!(flags & 0x01)) {
-			/* Don't look at children of a not present device */
+	if (!(flags & ACPI_STA_DEVICE_PRESENT)) {
+		/* Don't look at children of a not present device */
 
-			return_ACPI_STATUS(AE_CTRL_DEPTH);
-		}
+		return_ACPI_STATUS(AE_CTRL_DEPTH);
 	}
 
 	/*
-	 * The device is present. Run _INI.
+	 * The device is present and _INI exists. Run the _INI method.
+	 * (We already have the _INI node from above)
 	 */
 	ACPI_DEBUG_EXEC(acpi_ut_display_init_pathname(ACPI_TYPE_METHOD,
 						      pinfo.node,
 						      METHOD_NAME__INI));
-	status = acpi_ns_evaluate_relative(METHOD_NAME__INI, &pinfo);
-	if (ACPI_FAILURE(status)) {
-		/* No _INI (AE_NOT_FOUND) means device requires no initialization */
 
-		if (status != AE_NOT_FOUND) {
-			/* Ignore error and move on to next device */
+	pinfo.node = ini_node;
+	status = acpi_ns_evaluate_by_handle(&pinfo);
+	if (ACPI_FAILURE(status)) {
+		/* Ignore error and move on to next device */
 
 #ifdef ACPI_DEBUG_OUTPUT
-			char *scope_name =
-			    acpi_ns_get_external_pathname(pinfo.node);
+		char *scope_name = acpi_ns_get_external_pathname(ini_node);
 
-			ACPI_DEBUG_PRINT((ACPI_DB_WARN, "%s._INI failed: %s\n",
-					  scope_name,
-					  acpi_format_exception(status)));
+		ACPI_WARNING((AE_INFO, "%s._INI failed: %s",
+			      scope_name, acpi_format_exception(status)));
 
-			ACPI_MEM_FREE(scope_name);
+		ACPI_MEM_FREE(scope_name);
 #endif
-		}
-
-		status = AE_OK;
 	} else {
 		/* Delete any return object (especially if implicit_return is enabled) */
 
@@ -434,5 +441,5 @@ acpi_ns_init_one_device(acpi_handle obj_handle,
 		    acpi_gbl_init_handler(pinfo.node, ACPI_INIT_DEVICE_INI);
 	}
 
-	return_ACPI_STATUS(status);
+	return_ACPI_STATUS(AE_OK);
 }

drivers/acpi/namespace/nsload.c

@@ -5,7 +5,7 @@
  *****************************************************************************/
 
 /*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -92,7 +92,7 @@ acpi_ns_load_table(struct acpi_table_desc *table_desc,
 	/* Check validity of the AML start and length */
 
 	if (!table_desc->aml_start) {
-		ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Null AML pointer\n"));
+		ACPI_ERROR((AE_INFO, "Null AML pointer"));
 		return_ACPI_STATUS(AE_BAD_PARAMETER);
 	}
 
@@ -102,8 +102,8 @@ acpi_ns_load_table(struct acpi_table_desc *table_desc,
 	/* Ignore table if there is no AML contained within */
 
 	if (!table_desc->aml_length) {
-		ACPI_REPORT_WARNING(("Zero-length AML block in table [%4.4s]\n",
-				     table_desc->pointer->signature));
+		ACPI_WARNING((AE_INFO, "Zero-length AML block in table [%4.4s]",
+			      table_desc->pointer->signature));
 		return_ACPI_STATUS(AE_OK);
 	}
 
@@ -263,7 +263,7 @@ acpi_status acpi_ns_load_namespace(void)
 	/* There must be at least a DSDT installed */
 
 	if (acpi_gbl_DSDT == NULL) {
-		ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "DSDT is not in memory\n"));
+		ACPI_ERROR((AE_INFO, "DSDT is not in memory"));
 		return_ACPI_STATUS(AE_NO_ACPI_TABLES);
 	}
 

drivers/acpi/namespace/nsnames.c

@@ -5,7 +5,7 @@
  ******************************************************************************/
 
 /*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -75,7 +75,7 @@ acpi_ns_build_external_path(struct acpi_namespace_node *node,
 	acpi_size index;
 	struct acpi_namespace_node *parent_node;
 
-	ACPI_FUNCTION_NAME("ns_build_external_path");
+	ACPI_FUNCTION_ENTRY();
 
 	/* Special case for root */
 
@@ -110,9 +110,9 @@ acpi_ns_build_external_path(struct acpi_namespace_node *node,
 	name_buffer[index] = AML_ROOT_PREFIX;
 
 	if (index != 0) {
-		ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-				  "Could not construct pathname; index=%X, size=%X, Path=%s\n",
-				  (u32) index, (u32) size, &name_buffer[size]));
+		ACPI_ERROR((AE_INFO,
+			    "Could not construct pathname; index=%X, size=%X, Path=%s",
+			    (u32) index, (u32) size, &name_buffer[size]));
 	}
 
 	return;
@@ -148,7 +148,7 @@ char *acpi_ns_get_external_pathname(struct acpi_namespace_node *node)
 
 	name_buffer = ACPI_MEM_CALLOCATE(size);
 	if (!name_buffer) {
-		ACPI_REPORT_ERROR(("ns_get_table_pathname: allocation failure\n"));
+		ACPI_ERROR((AE_INFO, "Allocation failure"));
 		return_PTR(NULL);
 	}
 
@@ -241,7 +241,7 @@ acpi_ns_handle_to_pathname(acpi_handle target_handle,
 
 	acpi_ns_build_external_path(node, required_size, buffer->pointer);
 
-	ACPI_DEBUG_PRINT((ACPI_DB_EXEC, "%s [%X] \n",
+	ACPI_DEBUG_PRINT((ACPI_DB_EXEC, "%s [%X]\n",
 			  (char *)buffer->pointer, (u32) required_size));
 	return_ACPI_STATUS(AE_OK);
 }

drivers/acpi/namespace/nsobject.c

@@ -6,7 +6,7 @@
  ******************************************************************************/
 
 /*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -84,22 +84,23 @@ acpi_ns_attach_object(struct acpi_namespace_node *node,
 	if (!node) {
 		/* Invalid handle */
 
-		ACPI_REPORT_ERROR(("ns_attach_object: Null named_obj handle\n"));
+		ACPI_ERROR((AE_INFO, "Null named_obj handle"));
 		return_ACPI_STATUS(AE_BAD_PARAMETER);
 	}
 
 	if (!object && (ACPI_TYPE_ANY != type)) {
 		/* Null object */
 
-		ACPI_REPORT_ERROR(("ns_attach_object: Null object, but type not ACPI_TYPE_ANY\n"));
+		ACPI_ERROR((AE_INFO,
+			    "Null object, but type not ACPI_TYPE_ANY"));
 		return_ACPI_STATUS(AE_BAD_PARAMETER);
 	}
 
 	if (ACPI_GET_DESCRIPTOR_TYPE(node) != ACPI_DESC_TYPE_NAMED) {
 		/* Not a name handle */
 
-		ACPI_REPORT_ERROR(("ns_attach_object: Invalid handle %p [%s]\n",
-				   node, acpi_ut_get_descriptor_name(node)));
+		ACPI_ERROR((AE_INFO, "Invalid handle %p [%s]",
+			    node, acpi_ut_get_descriptor_name(node)));
 		return_ACPI_STATUS(AE_BAD_PARAMETER);
 	}
 
@@ -254,7 +255,7 @@ union acpi_operand_object *acpi_ns_get_attached_object(struct
 	ACPI_FUNCTION_TRACE_PTR("ns_get_attached_object", node);
 
 	if (!node) {
-		ACPI_DEBUG_PRINT((ACPI_DB_WARN, "Null Node ptr\n"));
+		ACPI_WARNING((AE_INFO, "Null Node ptr"));
 		return_PTR(NULL);
 	}
 

drivers/acpi/namespace/nsparse.c

@@ -5,7 +5,7 @@
  *****************************************************************************/
 
 /*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without

drivers/acpi/namespace/nssearch.c

@@ -5,7 +5,7 @@
  ******************************************************************************/
 
 /*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -99,8 +99,8 @@ acpi_ns_search_node(u32 target_name,
 		if (scope_name) {
 			ACPI_DEBUG_PRINT((ACPI_DB_NAMES,
 					  "Searching %s (%p) For [%4.4s] (%s)\n",
-					  scope_name, node,
-					  (char *)&target_name,
+					  scope_name, node, ACPI_CAST_PTR(char,
+									  &target_name),
 					  acpi_ut_get_type_name(type)));
 
 			ACPI_MEM_FREE(scope_name);
@@ -131,7 +131,7 @@ acpi_ns_search_node(u32 target_name,
 			 */
 			ACPI_DEBUG_PRINT((ACPI_DB_NAMES,
 					  "Name [%4.4s] (%s) %p found in scope [%4.4s] %p\n",
-					  (char *)&target_name,
+					  ACPI_CAST_PTR(char, &target_name),
 					  acpi_ut_get_type_name(next_node->
 								type),
 					  next_node,
@@ -160,7 +160,8 @@ acpi_ns_search_node(u32 target_name,
 
 	ACPI_DEBUG_PRINT((ACPI_DB_NAMES,
 			  "Name [%4.4s] (%s) not found in search in scope [%4.4s] %p first child %p\n",
-			  (char *)&target_name, acpi_ut_get_type_name(type),
+			  ACPI_CAST_PTR(char, &target_name),
+			  acpi_ut_get_type_name(type),
 			  acpi_ut_get_node_name(node), node, node->child));
 
 	return_ACPI_STATUS(AE_NOT_FOUND);
@@ -210,14 +211,14 @@ acpi_ns_search_parent_tree(u32 target_name,
 	 */
 	if (!parent_node) {
 		ACPI_DEBUG_PRINT((ACPI_DB_NAMES, "[%4.4s] has no parent\n",
-				  (char *)&target_name));
+				  ACPI_CAST_PTR(char, &target_name)));
 		return_ACPI_STATUS(AE_NOT_FOUND);
 	}
 
 	if (acpi_ns_local(type)) {
 		ACPI_DEBUG_PRINT((ACPI_DB_NAMES,
 				  "[%4.4s] type [%s] must be local to this scope (no parent search)\n",
-				  (char *)&target_name,
+				  ACPI_CAST_PTR(char, &target_name),
 				  acpi_ut_get_type_name(type)));
 		return_ACPI_STATUS(AE_NOT_FOUND);
 	}
@@ -227,7 +228,7 @@ acpi_ns_search_parent_tree(u32 target_name,
 	ACPI_DEBUG_PRINT((ACPI_DB_NAMES,
 			  "Searching parent [%4.4s] for [%4.4s]\n",
 			  acpi_ut_get_node_name(parent_node),
-			  (char *)&target_name));
+			  ACPI_CAST_PTR(char, &target_name)));
 
 	/*
 	 * Search parents until target is found or we have backed up to the root
@@ -297,18 +298,17 @@ acpi_ns_search_and_enter(u32 target_name,
 	/* Parameter validation */
 
 	if (!node || !target_name || !return_node) {
-		ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-				  "Null param: Node %p Name %X return_node %p\n",
-				  node, target_name, return_node));
-
-		ACPI_REPORT_ERROR(("ns_search_and_enter: Null parameter\n"));
+		ACPI_ERROR((AE_INFO,
+			    "Null param: Node %p Name %X return_node %p",
+			    node, target_name, return_node));
 		return_ACPI_STATUS(AE_BAD_PARAMETER);
 	}
 
 	/* Name must consist of printable characters */
 
 	if (!acpi_ut_valid_acpi_name(target_name)) {
-		ACPI_REPORT_ERROR(("ns_search_and_enter: Bad character in ACPI Name: %X\n", target_name));
+		ACPI_ERROR((AE_INFO, "Bad character in ACPI Name: %X",
+			    target_name));
 		return_ACPI_STATUS(AE_BAD_CHARACTER);
 	}
 
@@ -360,7 +360,7 @@ acpi_ns_search_and_enter(u32 target_name,
 	if (interpreter_mode == ACPI_IMODE_EXECUTE) {
 		ACPI_DEBUG_PRINT((ACPI_DB_NAMES,
 				  "%4.4s Not found in %p [Not adding]\n",
-				  (char *)&target_name, node));
+				  ACPI_CAST_PTR(char, &target_name), node));
 
 		return_ACPI_STATUS(AE_NOT_FOUND);
 	}

drivers/acpi/namespace/nsutils.c

@@ -6,7 +6,7 @@
  *****************************************************************************/
 
 /*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -63,7 +63,6 @@ acpi_name acpi_ns_find_parent_name(struct acpi_namespace_node *node_to_search);
  *
  * PARAMETERS:  module_name         - Caller's module name (for error output)
  *              line_number         - Caller's line number (for error output)
- *              component_id        - Caller's component ID (for error output)
  *              internal_name       - Name or path of the namespace node
  *              lookup_status       - Exception code from NS lookup
  *
@@ -76,19 +75,17 @@ acpi_name acpi_ns_find_parent_name(struct acpi_namespace_node *node_to_search);
 void
 acpi_ns_report_error(char *module_name,
 		     u32 line_number,
-		     u32 component_id,
 		     char *internal_name, acpi_status lookup_status)
 {
 	acpi_status status;
 	char *name = NULL;
 
-	acpi_os_printf("%8s-%04d: *** Error: Looking up ",
-		       module_name, line_number);
+	acpi_ut_report_error(module_name, line_number);
 
 	if (lookup_status == AE_BAD_CHARACTER) {
 		/* There is a non-ascii character in the name */
 
-		acpi_os_printf("[0x%4.4X] (NON-ASCII)\n",
+		acpi_os_printf("[0x%4.4X] (NON-ASCII)",
 			       *(ACPI_CAST_PTR(u32, internal_name)));
 	} else {
 		/* Convert path to external format */
@@ -109,7 +106,7 @@ acpi_ns_report_error(char *module_name,
 		}
 	}
 
-	acpi_os_printf(" in namespace, %s\n",
+	acpi_os_printf(" Namespace lookup failure, %s\n",
 		       acpi_format_exception(lookup_status));
 }
 
@@ -119,10 +116,9 @@ acpi_ns_report_error(char *module_name,
  *
  * PARAMETERS:  module_name         - Caller's module name (for error output)
  *              line_number         - Caller's line number (for error output)
- *              component_id        - Caller's component ID (for error output)
  *              Message             - Error message to use on failure
  *              prefix_node         - Prefix relative to the path
- *              Path                - Path to the node
+ *              Path                - Path to the node (optional)
  *              method_status       - Execution status
  *
  * RETURN:      None
@@ -134,7 +130,6 @@ acpi_ns_report_error(char *module_name,
 void
 acpi_ns_report_method_error(char *module_name,
 			    u32 line_number,
-			    u32 component_id,
 			    char *message,
 			    struct acpi_namespace_node *prefix_node,
 			    char *path, acpi_status method_status)
@@ -142,17 +137,16 @@ acpi_ns_report_method_error(char *module_name,
 	acpi_status status;
 	struct acpi_namespace_node *node = prefix_node;
 
+	acpi_ut_report_error(module_name, line_number);
+
 	if (path) {
 		status = acpi_ns_get_node_by_path(path, prefix_node,
 						  ACPI_NS_NO_UPSEARCH, &node);
 		if (ACPI_FAILURE(status)) {
-			acpi_os_printf
-			    ("report_method_error: Could not get node\n");
-			return;
+			acpi_os_printf("[Could not get node by pathname]");
 		}
 	}
 
-	acpi_os_printf("%8s-%04d: *** Error: ", module_name, line_number);
 	acpi_ns_print_node_pathname(node, message);
 	acpi_os_printf(", %s\n", acpi_format_exception(method_status));
 }
@@ -248,11 +242,11 @@ acpi_object_type acpi_ns_get_type(struct acpi_namespace_node * node)
 	ACPI_FUNCTION_TRACE("ns_get_type");
 
 	if (!node) {
-		ACPI_REPORT_WARNING(("ns_get_type: Null Node input pointer\n"));
-		return_VALUE(ACPI_TYPE_ANY);
+		ACPI_WARNING((AE_INFO, "Null Node parameter"));
+		return_UINT32(ACPI_TYPE_ANY);
 	}
 
-	return_VALUE((acpi_object_type) node->type);
+	return_UINT32((acpi_object_type) node->type);
 }
 
 /*******************************************************************************
@@ -275,11 +269,11 @@ u32 acpi_ns_local(acpi_object_type type)
 	if (!acpi_ut_valid_object_type(type)) {
 		/* Type code out of range  */
 
-		ACPI_REPORT_WARNING(("ns_local: Invalid Object Type\n"));
-		return_VALUE(ACPI_NS_NORMAL);
+		ACPI_WARNING((AE_INFO, "Invalid Object Type %X", type));
+		return_UINT32(ACPI_NS_NORMAL);
 	}
 
-	return_VALUE((u32) acpi_gbl_ns_properties[type] & ACPI_NS_LOCAL);
+	return_UINT32((u32) acpi_gbl_ns_properties[type] & ACPI_NS_LOCAL);
 }
 
 /*******************************************************************************
@@ -627,7 +621,7 @@ acpi_ns_externalize_name(u32 internal_name_length,
 	 * with internal_name (invalid format).
 	 */
 	if (required_length > internal_name_length) {
-		ACPI_REPORT_ERROR(("ns_externalize_name: Invalid internal name\n"));
+		ACPI_ERROR((AE_INFO, "Invalid internal name"));
 		return_ACPI_STATUS(AE_BAD_PATHNAME);
 	}
 
@@ -803,12 +797,11 @@ u32 acpi_ns_opens_scope(acpi_object_type type)
 	if (!acpi_ut_valid_object_type(type)) {
 		/* type code out of range  */
 
-		ACPI_REPORT_WARNING(("ns_opens_scope: Invalid Object Type %X\n",
-				     type));
-		return_VALUE(ACPI_NS_NORMAL);
+		ACPI_WARNING((AE_INFO, "Invalid Object Type %X", type));
+		return_UINT32(ACPI_NS_NORMAL);
 	}
 
-	return_VALUE(((u32) acpi_gbl_ns_properties[type]) & ACPI_NS_NEWSCOPE);
+	return_UINT32(((u32) acpi_gbl_ns_properties[type]) & ACPI_NS_NEWSCOPE);
 }
 
 /*******************************************************************************

drivers/acpi/namespace/nswalk.c

@@ -5,7 +5,7 @@
  *****************************************************************************/
 
 /*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without

drivers/acpi/namespace/nsxfeval.c

@@ -6,7 +6,7 @@
  ******************************************************************************/
 
 /*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -112,8 +112,7 @@ acpi_evaluate_object_typed(acpi_handle handle,
 	if (return_buffer->length == 0) {
 		/* Error because caller specifically asked for a return value */
 
-		ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "No return value\n"));
-
+		ACPI_ERROR((AE_INFO, "No return value"));
 		return_ACPI_STATUS(AE_NULL_OBJECT);
 	}
 
@@ -125,11 +124,11 @@ acpi_evaluate_object_typed(acpi_handle handle,
 
 	/* Return object type does not match requested type */
 
-	ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-			  "Incorrect return type [%s] requested [%s]\n",
-			  acpi_ut_get_type_name(((union acpi_object *)
-						 return_buffer->pointer)->type),
-			  acpi_ut_get_type_name(return_type)));
+	ACPI_ERROR((AE_INFO,
+		    "Incorrect return type [%s] requested [%s]",
+		    acpi_ut_get_type_name(((union acpi_object *)return_buffer->
+					   pointer)->type),
+		    acpi_ut_get_type_name(return_type)));
 
 	if (must_free) {
 		/* Caller used ACPI_ALLOCATE_BUFFER, free the return buffer */
@@ -236,11 +235,11 @@ acpi_evaluate_object(acpi_handle handle,
 		 * qualified names above, this is an error
 		 */
 		if (!pathname) {
-			ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-					  "Both Handle and Pathname are NULL\n"));
+			ACPI_ERROR((AE_INFO,
+				    "Both Handle and Pathname are NULL"));
 		} else {
-			ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-					  "Handle is NULL and Pathname is relative\n"));
+			ACPI_ERROR((AE_INFO,
+				    "Handle is NULL and Pathname is relative"));
 		}
 
 		status = AE_BAD_PARAMETER;
@@ -399,7 +398,7 @@ acpi_walk_namespace(acpi_object_type type,
 
 	/* Parameter validation */
 
-	if ((type > ACPI_TYPE_EXTERNAL_MAX) || (!max_depth) || (!user_function)) {
+	if ((type > ACPI_TYPE_LOCAL_MAX) || (!max_depth) || (!user_function)) {
 		return_ACPI_STATUS(AE_BAD_PARAMETER);
 	}
 
@@ -473,8 +472,8 @@ acpi_ns_get_device_callback(acpi_handle obj_handle,
 		return (AE_CTRL_DEPTH);
 	}
 
-	if (!(flags & 0x01)) {
-		/* Don't return at the device or children of the device if not there */
+	if (!(flags & ACPI_STA_DEVICE_PRESENT)) {
+		/* Don't examine children of the device if not present */
 
 		return (AE_CTRL_DEPTH);
 	}

drivers/acpi/namespace/nsxfname.c

@@ -6,7 +6,7 @@
  *****************************************************************************/
 
 /*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -300,8 +300,7 @@ acpi_get_object_info(acpi_handle handle, struct acpi_buffer * buffer)
 
 		status = acpi_ut_execute_CID(node, &cid_list);
 		if (ACPI_SUCCESS(status)) {
-			size += ((acpi_size) cid_list->count - 1) *
-			    sizeof(struct acpi_compatible_id);
+			size += cid_list->size;
 			info->valid |= ACPI_VALID_CID;
 		}
 

drivers/acpi/namespace/nsxfobj.c

@@ -6,7 +6,7 @@
  ******************************************************************************/
 
 /*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without

drivers/acpi/osl.c

@@ -838,7 +838,7 @@ acpi_status acpi_os_wait_semaphore(acpi_handle handle, u32 units, u16 timeout)
 			static const int quantum_ms = 1000 / HZ;
 
 			ret = down_trylock(sem);
-			for (i = timeout; (i > 0 && ret < 0); i -= quantum_ms) {
+			for (i = timeout; (i > 0 && ret != 0); i -= quantum_ms) {
 				schedule_timeout_interruptible(1);
 				ret = down_trylock(sem);
 			}
@@ -1060,13 +1060,11 @@ EXPORT_SYMBOL(max_cstate);
  * Acquire a spinlock.
  *
  * handle is a pointer to the spinlock_t.
- * flags is *not* the result of save_flags - it is an ACPI-specific flag variable
- *   that indicates whether we are at interrupt level.
  */
 
-unsigned long acpi_os_acquire_lock(acpi_handle handle)
+acpi_cpu_flags acpi_os_acquire_lock(acpi_handle handle)
 {
-	unsigned long flags;
+	acpi_cpu_flags flags;
 	spin_lock_irqsave((spinlock_t *) handle, flags);
 	return flags;
 }
@@ -1075,7 +1073,7 @@ unsigned long acpi_os_acquire_lock(acpi_handle handle)
  * Release a spinlock. See above.
  */
 
-void acpi_os_release_lock(acpi_handle handle, unsigned long flags)
+void acpi_os_release_lock(acpi_handle handle, acpi_cpu_flags flags)
 {
 	spin_unlock_irqrestore((spinlock_t *) handle, flags);
 }

drivers/acpi/parser/psargs.c

@@ -5,7 +5,7 @@
  *****************************************************************************/
 
 /*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -45,6 +45,7 @@
 #include <acpi/acparser.h>
 #include <acpi/amlcode.h>
 #include <acpi/acnamesp.h>
+#include <acpi/acdispat.h>
 
 #define _COMPONENT          ACPI_PARSER
 ACPI_MODULE_NAME("psargs")
@@ -62,61 +63,51 @@ static union acpi_parse_object *acpi_ps_get_next_field(struct acpi_parse_state
  *
  * PARAMETERS:  parser_state        - Current parser state object
  *
- * RETURN:      Decoded package length.  On completion, the AML pointer points
+ * RETURN:      Decoded package length. On completion, the AML pointer points
  *              past the length byte or bytes.
  *
- * DESCRIPTION: Decode and return a package length field
+ * DESCRIPTION: Decode and return a package length field.
+ *              Note: Largest package length is 28 bits, from ACPI specification
  *
  ******************************************************************************/
 
 static u32
 acpi_ps_get_next_package_length(struct acpi_parse_state *parser_state)
 {
-	u32 encoded_length;
-	u32 length = 0;
+	u8 *aml = parser_state->aml;
+	u32 package_length = 0;
+	acpi_native_uint byte_count;
+	u8 byte_zero_mask = 0x3F;	/* Default [0:5] */
 
 	ACPI_FUNCTION_TRACE("ps_get_next_package_length");
 
-	encoded_length = (u32) ACPI_GET8(parser_state->aml);
-	parser_state->aml++;
-
-	switch (encoded_length >> 6) {	/* bits 6-7 contain encoding scheme */
-	case 0:		/* 1-byte encoding (bits 0-5) */
-
-		length = (encoded_length & 0x3F);
-		break;
-
-	case 1:		/* 2-byte encoding (next byte + bits 0-3) */
-
-		length = ((ACPI_GET8(parser_state->aml) << 04) |
-			  (encoded_length & 0x0F));
-		parser_state->aml++;
-		break;
-
-	case 2:		/* 3-byte encoding (next 2 bytes + bits 0-3) */
-
-		length = ((ACPI_GET8(parser_state->aml + 1) << 12) |
-			  (ACPI_GET8(parser_state->aml) << 04) |
-			  (encoded_length & 0x0F));
-		parser_state->aml += 2;
-		break;
+	/*
+	 * Byte 0 bits [6:7] contain the number of additional bytes
+	 * used to encode the package length, either 0,1,2, or 3
+	 */
+	byte_count = (aml[0] >> 6);
+	parser_state->aml += (byte_count + 1);
 
-	case 3:		/* 4-byte encoding (next 3 bytes + bits 0-3) */
+	/* Get bytes 3, 2, 1 as needed */
 
-		length = ((ACPI_GET8(parser_state->aml + 2) << 20) |
-			  (ACPI_GET8(parser_state->aml + 1) << 12) |
-			  (ACPI_GET8(parser_state->aml) << 04) |
-			  (encoded_length & 0x0F));
-		parser_state->aml += 3;
-		break;
-
-	default:
+	while (byte_count) {
+		/*
+		 * Final bit positions for the package length bytes:
+		 *      Byte3->[20:27]
+		 *      Byte2->[12:19]
+		 *      Byte1->[04:11]
+		 *      Byte0->[00:03]
+		 */
+		package_length |= (aml[byte_count] << ((byte_count << 3) - 4));
 
-		/* Can't get here, only 2 bits / 4 cases */
-		break;
+		byte_zero_mask = 0x0F;	/* Use bits [0:3] of byte 0 */
+		byte_count--;
 	}
 
-	return_VALUE(length);
+	/* Byte 0 is a special case, either bits [0:3] or [0:5] are used */
+
+	package_length |= (aml[0] & byte_zero_mask);
+	return_UINT32(package_length);
 }
 
 /*******************************************************************************
@@ -135,16 +126,15 @@ acpi_ps_get_next_package_length(struct acpi_parse_state *parser_state)
 u8 *acpi_ps_get_next_package_end(struct acpi_parse_state *parser_state)
 {
 	u8 *start = parser_state->aml;
-	acpi_native_uint length;
+	u32 package_length;
 
 	ACPI_FUNCTION_TRACE("ps_get_next_package_end");
 
-	/* Function below changes parser_state->Aml */
+	/* Function below updates parser_state->Aml */
 
-	length =
-	    (acpi_native_uint) acpi_ps_get_next_package_length(parser_state);
+	package_length = acpi_ps_get_next_package_length(parser_state);
 
-	return_PTR(start + length);	/* end of package */
+	return_PTR(start + package_length);	/* end of package */
 }
 
 /*******************************************************************************
@@ -169,17 +159,15 @@ char *acpi_ps_get_next_namestring(struct acpi_parse_state *parser_state)
 
 	ACPI_FUNCTION_TRACE("ps_get_next_namestring");
 
-	/* Handle multiple prefix characters */
-
-	while (acpi_ps_is_prefix_char(ACPI_GET8(end))) {
-		/* Include prefix '\\' or '^' */
+	/* Point past any namestring prefix characters (backslash or carat) */
 
+	while (acpi_ps_is_prefix_char(*end)) {
 		end++;
 	}
 
-	/* Decode the path */
+	/* Decode the path prefix character */
 
-	switch (ACPI_GET8(end)) {
+	switch (*end) {
 	case 0:
 
 		/* null_name */
@@ -199,9 +187,9 @@ char *acpi_ps_get_next_namestring(struct acpi_parse_state *parser_state)
 
 	case AML_MULTI_NAME_PREFIX_OP:
 
-		/* Multiple name segments, 4 chars each */
+		/* Multiple name segments, 4 chars each, count in next byte */
 
-		end += 2 + ((acpi_size) ACPI_GET8(end + 1) * ACPI_NAME_SIZE);
+		end += 2 + (*(end + 1) * ACPI_NAME_SIZE);
 		break;
 
 	default:
@@ -212,7 +200,7 @@ char *acpi_ps_get_next_namestring(struct acpi_parse_state *parser_state)
 		break;
 	}
 
-	parser_state->aml = (u8 *) end;
+	parser_state->aml = end;
 	return_PTR((char *)start);
 }
 
@@ -224,7 +212,7 @@ char *acpi_ps_get_next_namestring(struct acpi_parse_state *parser_state)
  *              Arg                 - Where the namepath will be stored
  *              arg_count           - If the namepath points to a control method
  *                                    the method's argument is returned here.
- *              method_call         - Whether the namepath can possibly be the
+ *              possible_method_call - Whether the namepath can possibly be the
  *                                    start of a method call
  *
  * RETURN:      Status
@@ -240,11 +228,11 @@ char *acpi_ps_get_next_namestring(struct acpi_parse_state *parser_state)
 acpi_status
 acpi_ps_get_next_namepath(struct acpi_walk_state *walk_state,
 			  struct acpi_parse_state *parser_state,
-			  union acpi_parse_object *arg, u8 method_call)
+			  union acpi_parse_object *arg, u8 possible_method_call)
 {
 	char *path;
 	union acpi_parse_object *name_op;
-	acpi_status status = AE_OK;
+	acpi_status status;
 	union acpi_operand_object *method_desc;
 	struct acpi_namespace_node *node;
 	union acpi_generic_state scope_info;
@@ -252,115 +240,129 @@ acpi_ps_get_next_namepath(struct acpi_walk_state *walk_state,
 	ACPI_FUNCTION_TRACE("ps_get_next_namepath");
 
 	path = acpi_ps_get_next_namestring(parser_state);
+	acpi_ps_init_op(arg, AML_INT_NAMEPATH_OP);
 
-	/* Null path case is allowed */
+	/* Null path case is allowed, just exit */
 
-	if (path) {
-		/*
-		 * Lookup the name in the internal namespace
-		 */
-		scope_info.scope.node = NULL;
-		node = parser_state->start_node;
-		if (node) {
-			scope_info.scope.node = node;
-		}
+	if (!path) {
+		arg->common.value.name = path;
+		return_ACPI_STATUS(AE_OK);
+	}
 
-		/*
-		 * Lookup object.  We don't want to add anything new to the namespace
-		 * here, however.  So we use MODE_EXECUTE.  Allow searching of the
-		 * parent tree, but don't open a new scope -- we just want to lookup the
-		 * object  (MUST BE mode EXECUTE to perform upsearch)
-		 */
-		status = acpi_ns_lookup(&scope_info, path, ACPI_TYPE_ANY,
-					ACPI_IMODE_EXECUTE,
-					ACPI_NS_SEARCH_PARENT |
-					ACPI_NS_DONT_OPEN_SCOPE, NULL, &node);
-		if (ACPI_SUCCESS(status) && method_call) {
-			if (node->type == ACPI_TYPE_METHOD) {
-				/* This name is actually a control method invocation */
-
-				method_desc = acpi_ns_get_attached_object(node);
-				ACPI_DEBUG_PRINT((ACPI_DB_PARSE,
-						  "Control Method - %p Desc %p Path=%p\n",
-						  node, method_desc, path));
-
-				name_op = acpi_ps_alloc_op(AML_INT_NAMEPATH_OP);
-				if (!name_op) {
-					return_ACPI_STATUS(AE_NO_MEMORY);
-				}
+	/* Setup search scope info */
 
-				/* Change arg into a METHOD CALL and attach name to it */
+	scope_info.scope.node = NULL;
+	node = parser_state->start_node;
+	if (node) {
+		scope_info.scope.node = node;
+	}
 
-				acpi_ps_init_op(arg, AML_INT_METHODCALL_OP);
-				name_op->common.value.name = path;
+	/*
+	 * Lookup the name in the internal namespace. We don't want to add
+	 * anything new to the namespace here, however, so we use MODE_EXECUTE.
+	 * Allow searching of the parent tree, but don't open a new scope -
+	 * we just want to lookup the object (must be mode EXECUTE to perform
+	 * the upsearch)
+	 */
+	status =
+	    acpi_ns_lookup(&scope_info, path, ACPI_TYPE_ANY, ACPI_IMODE_EXECUTE,
+			   ACPI_NS_SEARCH_PARENT | ACPI_NS_DONT_OPEN_SCOPE,
+			   NULL, &node);
 
-				/* Point METHODCALL/NAME to the METHOD Node */
+	/*
+	 * If this name is a control method invocation, we must
+	 * setup the method call
+	 */
+	if (ACPI_SUCCESS(status) &&
+	    possible_method_call && (node->type == ACPI_TYPE_METHOD)) {
+		/* This name is actually a control method invocation */
 
-				name_op->common.node = node;
-				acpi_ps_append_arg(arg, name_op);
+		method_desc = acpi_ns_get_attached_object(node);
+		ACPI_DEBUG_PRINT((ACPI_DB_PARSE,
+				  "Control Method - %p Desc %p Path=%p\n", node,
+				  method_desc, path));
 
-				if (!method_desc) {
-					ACPI_REPORT_ERROR(("ps_get_next_namepath: Control Method %p has no attached object\n", node));
-					return_ACPI_STATUS(AE_AML_INTERNAL);
-				}
+		name_op = acpi_ps_alloc_op(AML_INT_NAMEPATH_OP);
+		if (!name_op) {
+			return_ACPI_STATUS(AE_NO_MEMORY);
+		}
 
-				ACPI_DEBUG_PRINT((ACPI_DB_PARSE,
-						  "Control Method - %p Args %X\n",
-						  node,
-						  method_desc->method.
-						  param_count));
+		/* Change Arg into a METHOD CALL and attach name to it */
 
-				/* Get the number of arguments to expect */
+		acpi_ps_init_op(arg, AML_INT_METHODCALL_OP);
+		name_op->common.value.name = path;
 
-				walk_state->arg_count =
-				    method_desc->method.param_count;
-				return_ACPI_STATUS(AE_OK);
-			}
+		/* Point METHODCALL/NAME to the METHOD Node */
 
-			/*
-			 * Else this is normal named object reference.
-			 * Just init the NAMEPATH object with the pathname.
-			 * (See code below)
-			 */
-		}
+		name_op->common.node = node;
+		acpi_ps_append_arg(arg, name_op);
 
-		if (ACPI_FAILURE(status)) {
-			/*
-			 * 1) Any error other than NOT_FOUND is always severe
-			 * 2) NOT_FOUND is only important if we are executing a method.
-			 * 3) If executing a cond_ref_of opcode, NOT_FOUND is ok.
-			 */
-			if ((((walk_state->
-			       parse_flags & ACPI_PARSE_MODE_MASK) ==
-			      ACPI_PARSE_EXECUTE) && (status == AE_NOT_FOUND)
-			     && (walk_state->op->common.aml_opcode !=
-				 AML_COND_REF_OF_OP))
-			    || (status != AE_NOT_FOUND)) {
-				ACPI_REPORT_NSERROR(path, status);
-
-				acpi_os_printf
-				    ("search_node %p start_node %p return_node %p\n",
-				     scope_info.scope.node,
-				     parser_state->start_node, node);
-
-			} else {
-				/*
-				 * We got a NOT_FOUND during table load or we encountered
-				 * a cond_ref_of(x) where the target does not exist.
-				 * Either case is ok
-				 */
-				status = AE_OK;
-			}
+		if (!method_desc) {
+			ACPI_ERROR((AE_INFO,
+				    "Control Method %p has no attached object",
+				    node));
+			return_ACPI_STATUS(AE_AML_INTERNAL);
 		}
+
+		ACPI_DEBUG_PRINT((ACPI_DB_PARSE,
+				  "Control Method - %p Args %X\n",
+				  node, method_desc->method.param_count));
+
+		/* Get the number of arguments to expect */
+
+		walk_state->arg_count = method_desc->method.param_count;
+		return_ACPI_STATUS(AE_OK);
 	}
 
 	/*
-	 * Regardless of success/failure above,
-	 * Just initialize the Op with the pathname.
+	 * Special handling if the name was not found during the lookup -
+	 * some not_found cases are allowed
 	 */
-	acpi_ps_init_op(arg, AML_INT_NAMEPATH_OP);
-	arg->common.value.name = path;
+	if (status == AE_NOT_FOUND) {
+		/* 1) not_found is ok during load pass 1/2 (allow forward references) */
+
+		if ((walk_state->parse_flags & ACPI_PARSE_MODE_MASK) !=
+		    ACPI_PARSE_EXECUTE) {
+			status = AE_OK;
+		}
+
+		/* 2) not_found during a cond_ref_of(x) is ok by definition */
+
+		else if (walk_state->op->common.aml_opcode ==
+			 AML_COND_REF_OF_OP) {
+			status = AE_OK;
+		}
+
+		/*
+		 * 3) not_found while building a Package is ok at this point, we
+		 * may flag as an error later if slack mode is not enabled.
+		 * (Some ASL code depends on allowing this behavior)
+		 */
+		else if ((arg->common.parent) &&
+			 ((arg->common.parent->common.aml_opcode ==
+			   AML_PACKAGE_OP)
+			  || (arg->common.parent->common.aml_opcode ==
+			      AML_VAR_PACKAGE_OP))) {
+			status = AE_OK;
+		}
+	}
+
+	/* Final exception check (may have been changed from code above) */
 
+	if (ACPI_FAILURE(status)) {
+		ACPI_ERROR_NAMESPACE(path, status);
+
+		if ((walk_state->parse_flags & ACPI_PARSE_MODE_MASK) ==
+		    ACPI_PARSE_EXECUTE) {
+			/* Report a control method execution error */
+
+			status = acpi_ds_method_error(status, walk_state);
+		}
+	}
+
+	/* Save the namepath */
+
+	arg->common.value.name = path;
 	return_ACPI_STATUS(status);
 }
 
@@ -382,59 +384,63 @@ void
 acpi_ps_get_next_simple_arg(struct acpi_parse_state *parser_state,
 			    u32 arg_type, union acpi_parse_object *arg)
 {
+	u32 length;
+	u16 opcode;
+	u8 *aml = parser_state->aml;
 
 	ACPI_FUNCTION_TRACE_U32("ps_get_next_simple_arg", arg_type);
 
 	switch (arg_type) {
 	case ARGP_BYTEDATA:
 
-		acpi_ps_init_op(arg, AML_BYTE_OP);
-		arg->common.value.integer = (u32) ACPI_GET8(parser_state->aml);
-		parser_state->aml++;
+		/* Get 1 byte from the AML stream */
+
+		opcode = AML_BYTE_OP;
+		arg->common.value.integer = (acpi_integer) * aml;
+		length = 1;
 		break;
 
 	case ARGP_WORDDATA:
 
-		acpi_ps_init_op(arg, AML_WORD_OP);
-
 		/* Get 2 bytes from the AML stream */
 
-		ACPI_MOVE_16_TO_32(&arg->common.value.integer,
-				   parser_state->aml);
-		parser_state->aml += 2;
+		opcode = AML_WORD_OP;
+		ACPI_MOVE_16_TO_64(&arg->common.value.integer, aml);
+		length = 2;
 		break;
 
 	case ARGP_DWORDDATA:
 
-		acpi_ps_init_op(arg, AML_DWORD_OP);
-
 		/* Get 4 bytes from the AML stream */
 
-		ACPI_MOVE_32_TO_32(&arg->common.value.integer,
-				   parser_state->aml);
-		parser_state->aml += 4;
+		opcode = AML_DWORD_OP;
+		ACPI_MOVE_32_TO_64(&arg->common.value.integer, aml);
+		length = 4;
 		break;
 
 	case ARGP_QWORDDATA:
 
-		acpi_ps_init_op(arg, AML_QWORD_OP);
-
 		/* Get 8 bytes from the AML stream */
 
-		ACPI_MOVE_64_TO_64(&arg->common.value.integer,
-				   parser_state->aml);
-		parser_state->aml += 8;
+		opcode = AML_QWORD_OP;
+		ACPI_MOVE_64_TO_64(&arg->common.value.integer, aml);
+		length = 8;
 		break;
 
 	case ARGP_CHARLIST:
 
-		acpi_ps_init_op(arg, AML_STRING_OP);
-		arg->common.value.string = (char *)parser_state->aml;
+		/* Get a pointer to the string, point past the string */
+
+		opcode = AML_STRING_OP;
+		arg->common.value.string = ACPI_CAST_PTR(char, aml);
 
-		while (ACPI_GET8(parser_state->aml) != '\0') {
-			parser_state->aml++;
+		/* Find the null terminator */
+
+		length = 0;
+		while (aml[length]) {
+			length++;
 		}
-		parser_state->aml++;
+		length++;
 		break;
 
 	case ARGP_NAME:
@@ -443,14 +449,16 @@ acpi_ps_get_next_simple_arg(struct acpi_parse_state *parser_state,
 		acpi_ps_init_op(arg, AML_INT_NAMEPATH_OP);
 		arg->common.value.name =
 		    acpi_ps_get_next_namestring(parser_state);
-		break;
+		return_VOID;
 
 	default:
 
-		ACPI_REPORT_ERROR(("Invalid arg_type %X\n", arg_type));
-		break;
+		ACPI_ERROR((AE_INFO, "Invalid arg_type %X", arg_type));
+		return_VOID;
 	}
 
+	acpi_ps_init_op(arg, opcode);
+	parser_state->aml += length;
 	return_VOID;
 }
 
@@ -540,7 +548,7 @@ static union acpi_parse_object *acpi_ps_get_next_field(struct acpi_parse_state
 		 * access_type is first operand, access_attribute is second
 		 */
 		field->common.value.integer =
-		    (ACPI_GET8(parser_state->aml) << 8);
+		    (((u32) ACPI_GET8(parser_state->aml) << 8));
 		parser_state->aml++;
 		field->common.value.integer |= ACPI_GET8(parser_state->aml);
 		parser_state->aml++;
@@ -703,7 +711,7 @@ acpi_ps_get_next_arg(struct acpi_walk_state *walk_state,
 
 	default:
 
-		ACPI_REPORT_ERROR(("Invalid arg_type: %X\n", arg_type));
+		ACPI_ERROR((AE_INFO, "Invalid arg_type: %X", arg_type));
 		status = AE_AML_OPERAND_TYPE;
 		break;
 	}

drivers/acpi/parser/psloop.c

@@ -5,7 +5,7 @@
  *****************************************************************************/
 
 /*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -123,16 +123,12 @@ acpi_status acpi_ps_parse_loop(struct acpi_walk_state *walk_state)
 				    && ((status & AE_CODE_MASK) !=
 					AE_CODE_CONTROL)) {
 					if (status == AE_AML_NO_RETURN_VALUE) {
-						ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-								  "Invoked method did not return a value, %s\n",
-								  acpi_format_exception
-								  (status)));
+						ACPI_EXCEPTION((AE_INFO, status,
+								"Invoked method did not return a value"));
 
 					}
-					ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-							  "get_predicate Failed, %s\n",
-							  acpi_format_exception
-							  (status)));
+					ACPI_EXCEPTION((AE_INFO, status,
+							"get_predicate Failed"));
 					return_ACPI_STATUS(status);
 				}
 
@@ -190,11 +186,11 @@ acpi_status acpi_ps_parse_loop(struct acpi_walk_state *walk_state)
 
 				/* The opcode is unrecognized.  Just skip unknown opcodes */
 
-				ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-						  "Found unknown opcode %X at AML address %p offset %X, ignoring\n",
-						  walk_state->opcode,
-						  parser_state->aml,
-						  walk_state->aml_offset));
+				ACPI_ERROR((AE_INFO,
+					    "Found unknown opcode %X at AML address %p offset %X, ignoring",
+					    walk_state->opcode,
+					    parser_state->aml,
+					    walk_state->aml_offset));
 
 				ACPI_DUMP_BUFFER(parser_state->aml, 128);
 
@@ -281,10 +277,8 @@ acpi_status acpi_ps_parse_loop(struct acpi_walk_state *walk_state)
 				    walk_state->descending_callback(walk_state,
 								    &op);
 				if (ACPI_FAILURE(status)) {
-					ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-							  "During name lookup/catalog, %s\n",
-							  acpi_format_exception
-							  (status)));
+					ACPI_EXCEPTION((AE_INFO, status,
+							"During name lookup/catalog"));
 					goto close_this_op;
 				}
 
@@ -704,6 +698,15 @@ acpi_status acpi_ps_parse_loop(struct acpi_walk_state *walk_state)
 				acpi_ps_pop_scope(parser_state, &op,
 						  &walk_state->arg_types,
 						  &walk_state->arg_count);
+
+				if (op->common.aml_opcode != AML_WHILE_OP) {
+					status2 =
+					    acpi_ds_result_stack_pop
+					    (walk_state);
+					if (ACPI_FAILURE(status2)) {
+						return_ACPI_STATUS(status2);
+					}
+				}
 			}
 
 			/* Close this iteration of the While loop */

drivers/acpi/parser/psopcode.c

@@ -5,7 +5,7 @@
  *****************************************************************************/
 
 /*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -747,7 +747,7 @@ const struct acpi_opcode_info *acpi_ps_get_opcode_info(u16 opcode)
 
 	/* Unknown AML opcode */
 
-	ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
+	ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
 			  "Unknown AML opcode [%4.4X]\n", opcode));
 
 	return (&acpi_gbl_aml_op_info[_UNK]);

drivers/acpi/parser/psparse.c

@@ -5,7 +5,7 @@
  *****************************************************************************/
 
 /*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -333,7 +333,6 @@ acpi_ps_next_parse_state(struct acpi_walk_state *walk_state,
 
 	switch (callback_status) {
 	case AE_CTRL_TERMINATE:
-
 		/*
 		 * A control method was terminated via a RETURN statement.
 		 * The walk of this method is complete.
@@ -346,13 +345,19 @@ acpi_ps_next_parse_state(struct acpi_walk_state *walk_state,
 
 		parser_state->aml = walk_state->aml_last_while;
 		walk_state->control_state->common.value = FALSE;
-		status = AE_CTRL_BREAK;
+		status = acpi_ds_result_stack_pop(walk_state);
+		if (ACPI_SUCCESS(status)) {
+			status = AE_CTRL_BREAK;
+		}
 		break;
 
 	case AE_CTRL_CONTINUE:
 
 		parser_state->aml = walk_state->aml_last_while;
-		status = AE_CTRL_CONTINUE;
+		status = acpi_ds_result_stack_pop(walk_state);
+		if (ACPI_SUCCESS(status)) {
+			status = AE_CTRL_CONTINUE;
+		}
 		break;
 
 	case AE_CTRL_PENDING:
@@ -369,16 +374,18 @@ acpi_ps_next_parse_state(struct acpi_walk_state *walk_state,
 #endif
 
 	case AE_CTRL_TRUE:
-
 		/*
 		 * Predicate of an IF was true, and we are at the matching ELSE.
 		 * Just close out this package
 		 */
 		parser_state->aml = acpi_ps_get_next_package_end(parser_state);
+		status = acpi_ds_result_stack_pop(walk_state);
+		if (ACPI_SUCCESS(status)) {
+			status = AE_CTRL_PENDING;
+		}
 		break;
 
 	case AE_CTRL_FALSE:
-
 		/*
 		 * Either an IF/WHILE Predicate was false or we encountered a BREAK
 		 * opcode.  In both cases, we do not execute the rest of the
@@ -503,22 +510,23 @@ acpi_status acpi_ps_parse_aml(struct acpi_walk_state *walk_state)
 		} else if (status == AE_CTRL_TERMINATE) {
 			status = AE_OK;
 		} else if ((status != AE_OK) && (walk_state->method_desc)) {
-			ACPI_REPORT_METHOD_ERROR("Method execution failed",
-						 walk_state->method_node, NULL,
-						 status);
-
-			/* Ensure proper cleanup */
+			/* Either the method parse or actual execution failed */
 
-			walk_state->parse_flags |= ACPI_PARSE_EXECUTE;
+			ACPI_ERROR_METHOD("Method parse/execution failed",
+					  walk_state->method_node, NULL,
+					  status);
 
 			/* Check for possible multi-thread reentrancy problem */
 
 			if ((status == AE_ALREADY_EXISTS) &&
 			    (!walk_state->method_desc->method.semaphore)) {
 				/*
-				 * This method is marked not_serialized, but it tried to create
+				 * Method tried to create an object twice. The probable cause is
+				 * that the method cannot handle reentrancy.
+				 *
+				 * The method is marked not_serialized, but it tried to create
 				 * a named object, causing the second thread entrance to fail.
-				 * We will workaround this by marking the method permanently
+				 * Workaround this problem by marking the method permanently
 				 * as Serialized.
 				 */
 				walk_state->method_desc->method.method_flags |=
@@ -536,15 +544,23 @@ acpi_status acpi_ps_parse_aml(struct acpi_walk_state *walk_state)
 		acpi_ds_scope_stack_clear(walk_state);
 
 		/*
-		 * If we just returned from the execution of a control method,
-		 * there's lots of cleanup to do
+		 * If we just returned from the execution of a control method or if we
+		 * encountered an error during the method parse phase, there's lots of
+		 * cleanup to do
 		 */
-		if ((walk_state->parse_flags & ACPI_PARSE_MODE_MASK) ==
-		    ACPI_PARSE_EXECUTE) {
+		if (((walk_state->parse_flags & ACPI_PARSE_MODE_MASK) ==
+		     ACPI_PARSE_EXECUTE) || (ACPI_FAILURE(status))) {
 			if (walk_state->method_desc) {
 				/* Decrement the thread count on the method parse tree */
 
-				walk_state->method_desc->method.thread_count--;
+				if (walk_state->method_desc->method.
+				    thread_count) {
+					walk_state->method_desc->method.
+					    thread_count--;
+				} else {
+					ACPI_ERROR((AE_INFO,
+						    "Invalid zero thread count in method"));
+				}
 			}
 
 			acpi_ds_terminate_control_method(walk_state);
@@ -553,7 +569,6 @@ acpi_status acpi_ps_parse_aml(struct acpi_walk_state *walk_state)
 		/* Delete this walk state and all linked control states */
 
 		acpi_ps_cleanup_scope(&walk_state->parser_state);
-
 		previous_walk_state = walk_state;
 
 		ACPI_DEBUG_PRINT((ACPI_DB_PARSE,

drivers/acpi/parser/psscope.c

@@ -5,7 +5,7 @@
  *****************************************************************************/
 
 /*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without

drivers/acpi/parser/pstree.c

@@ -5,7 +5,7 @@
  *****************************************************************************/
 
 /*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -132,7 +132,8 @@ acpi_ps_append_arg(union acpi_parse_object *op, union acpi_parse_object *arg)
 	if (op_info->class == AML_CLASS_UNKNOWN) {
 		/* Invalid opcode */
 
-		ACPI_REPORT_ERROR(("ps_append_arg: Invalid AML Opcode: 0x%2.2X\n", op->common.aml_opcode));
+		ACPI_ERROR((AE_INFO, "Invalid AML Opcode: 0x%2.2X",
+			    op->common.aml_opcode));
 		return;
 	}