m32r: Rearrange platform-dependent codes

Rearrange platform-dependent codes from arch/m32r/kernel/*.c
to arch/m32r/platforms/{platform}/.

Signed-off-by: Hirokazu Takata <takata@linux-m32r.org>

arch/m32r/Makefile

@@ -36,7 +36,8 @@ LIBGCC	:= $(shell $(CC) $(CFLAGS) -print-libgcc-file-name)
 libs-y	+= arch/m32r/lib/ $(LIBGCC)
 core-y	+= arch/m32r/kernel/	\
 	   arch/m32r/mm/	\
-	   arch/m32r/boot/
+	   arch/m32r/boot/	\
+	   arch/m32r/platforms/
 
 drivers-$(CONFIG_OPROFILE)	+= arch/m32r/oprofile/
 

arch/m32r/kernel/Makefile

@@ -8,14 +8,6 @@ obj-y	:= process.o entry.o traps.o align.o irq.o setup.o time.o \
 	m32r_ksyms.o sys_m32r.o semaphore.o signal.o ptrace.o
 
 obj-$(CONFIG_SMP)		+= smp.o smpboot.o
-obj-$(CONFIG_PLAT_MAPPI)	+= setup_mappi.o io_mappi.o
-obj-$(CONFIG_PLAT_MAPPI2)	+= setup_mappi2.o io_mappi2.o
-obj-$(CONFIG_PLAT_MAPPI3)	+= setup_mappi3.o io_mappi3.o
-obj-$(CONFIG_PLAT_USRV)		+= setup_usrv.o io_usrv.o
-obj-$(CONFIG_PLAT_M32700UT)	+= setup_m32700ut.o io_m32700ut.o
-obj-$(CONFIG_PLAT_OPSPUT)	+= setup_opsput.o io_opsput.o
 obj-$(CONFIG_MODULES)		+= module.o
-obj-$(CONFIG_PLAT_OAKS32R)	+= setup_oaks32r.o io_oaks32r.o
-obj-$(CONFIG_PLAT_M32104UT)	+= setup_m32104ut.o io_m32104ut.o
 
 EXTRA_AFLAGS	:= -traditional

arch/m32r/platforms/Makefile

@@ -0,0 +1,9 @@
+# arch/m32r/platforms/Makefile
+obj-$(CONFIG_PLAT_M32104UT)	+= m32104ut/
+obj-$(CONFIG_PLAT_M32700UT)	+= m32700ut/
+obj-$(CONFIG_PLAT_MAPPI)	+= mappi/
+obj-$(CONFIG_PLAT_MAPPI2)	+= mappi2/
+obj-$(CONFIG_PLAT_MAPPI3)	+= mappi3/
+obj-$(CONFIG_PLAT_OAKS32R)	+= oaks32r/
+obj-$(CONFIG_PLAT_OPSPUT)	+= opsput/
+obj-$(CONFIG_PLAT_USRV)		+= usrv/

arch/m32r/platforms/m32104ut/Makefile

@@ -0,0 +1 @@
+obj-y	:= setup.o io.o

arch/m32r/kernel/io_m32104ut.c → arch/m32r/platforms/m32104ut/io.c

@@ -1,5 +1,5 @@
 /*
- *  linux/arch/m32r/kernel/io_m32104ut.c
+ *  linux/arch/m32r/platforms/m32104ut/io.c
  *
  *  Typical I/O routines for M32104UT board.
  *

arch/m32r/kernel/setup_m32104ut.c → arch/m32r/platforms/m32104ut/setup.c

@@ -1,5 +1,5 @@
 /*
- *  linux/arch/m32r/kernel/setup_m32104ut.c
+ *  linux/arch/m32r/platforms/m32104ut/setup.c
  *
  *  Setup routines for M32104UT Board
  *

arch/m32r/platforms/m32700ut/Makefile

@@ -0,0 +1 @@
+obj-y	:= setup.o io.o

arch/m32r/kernel/io_m32700ut.c → arch/m32r/platforms/m32700ut/io.c

@@ -1,5 +1,5 @@
 /*
- *  linux/arch/m32r/kernel/io_m32700ut.c
+ *  linux/arch/m32r/platforms/m32700ut/io.c
  *
  *  Typical I/O routines for M32700UT board.
  *

arch/m32r/kernel/setup_m32700ut.c → arch/m32r/platforms/m32700ut/setup.c

@@ -1,5 +1,5 @@
 /*
- *  linux/arch/m32r/kernel/setup_m32700ut.c
+ *  linux/arch/m32r/platforms/m32700ut/setup.c
  *
  *  Setup routines for Renesas M32700UT Board
  *

arch/m32r/platforms/mappi/Makefile

@@ -0,0 +1 @@
+obj-y	:= setup.o io.o

arch/m32r/kernel/io_mappi.c → arch/m32r/platforms/mappi/io.c

@@ -1,5 +1,5 @@
 /*
- *  linux/arch/m32r/kernel/io_mappi.c
+ *  linux/arch/m32r/platforms/mappi/io.c
  *
  *  Typical I/O routines for Mappi board.
  *

arch/m32r/kernel/setup_mappi.c → arch/m32r/platforms/mappi/setup.c

@@ -1,5 +1,5 @@
 /*
- *  linux/arch/m32r/kernel/setup_mappi.c
+ *  linux/arch/m32r/platforms/mappi/setup.c
  *
  *  Setup routines for Renesas MAPPI Board
  *

arch/m32r/platforms/mappi2/Makefile

@@ -0,0 +1 @@
+obj-y	:= setup.o io.o

arch/m32r/kernel/io_mappi2.c → arch/m32r/platforms/mappi2/io.c

@@ -1,5 +1,5 @@
 /*
- *  linux/arch/m32r/kernel/io_mappi2.c
+ *  linux/arch/m32r/platforms/mappi2/io.c
  *
  *  Typical I/O routines for Mappi2 board.
  *

arch/m32r/kernel/setup_mappi2.c → arch/m32r/platforms/mappi2/setup.c

@@ -1,5 +1,5 @@
 /*
- *  linux/arch/m32r/kernel/setup_mappi2.c
+ *  linux/arch/m32r/platforms/mappi2/setup.c
  *
  *  Setup routines for Renesas MAPPI-II(M3A-ZA36) Board
  *

arch/m32r/platforms/mappi3/Makefile

@@ -0,0 +1 @@
+obj-y	:= setup.o io.o

arch/m32r/kernel/io_mappi3.c → arch/m32r/platforms/mappi3/io.c

@@ -1,5 +1,5 @@
 /*
- *  linux/arch/m32r/kernel/io_mappi3.c
+ *  linux/arch/m32r/platforms/mappi3/io.c
  *
  *  Typical I/O routines for Mappi3 board.
  *

arch/m32r/kernel/setup_mappi3.c → arch/m32r/platforms/mappi3/setup.c

@@ -1,5 +1,5 @@
 /*
- *  linux/arch/m32r/kernel/setup_mappi3.c
+ *  linux/arch/m32r/platforms/mappi3/setup.c
  *
  *  Setup routines for Renesas MAPPI-III(M3A-2170) Board
  *

arch/m32r/platforms/oaks32r/Makefile

@@ -0,0 +1 @@
+obj-y	:= setup.o io.o

arch/m32r/kernel/io_oaks32r.c → arch/m32r/platforms/oaks32r/io.c

@@ -1,5 +1,5 @@
 /*
- *  linux/arch/m32r/kernel/io_oaks32r.c
+ *  linux/arch/m32r/platforms/oaks32r/io.c
  *
  *  Typical I/O routines for OAKS32R board.
  *

arch/m32r/kernel/setup_oaks32r.c → arch/m32r/platforms/oaks32r/setup.c

@@ -1,5 +1,5 @@
 /*
- *  linux/arch/m32r/kernel/setup_oaks32r.c
+ *  linux/arch/m32r/platforms/oaks32r/setup.c
  *
  *  Setup routines for OAKS32R Board
  *

arch/m32r/platforms/opsput/Makefile

@@ -0,0 +1 @@
+obj-y	:= setup.o io.o

arch/m32r/kernel/io_opsput.c → arch/m32r/platforms/opsput/io.c

@@ -1,5 +1,5 @@
 /*
- *  linux/arch/m32r/kernel/io_opsput.c
+ *  linux/arch/m32r/platforms/opsput/io.c
  *
  *  Typical I/O routines for OPSPUT board.
  *

arch/m32r/kernel/setup_opsput.c → arch/m32r/platforms/opsput/setup.c

@@ -1,5 +1,5 @@
 /*
- *  linux/arch/m32r/kernel/setup_opsput.c
+ *  linux/arch/m32r/platforms/opsput/setup.c
  *
  *  Setup routines for Renesas OPSPUT Board
  *

arch/m32r/platforms/usrv/Makefile

@@ -0,0 +1 @@
+obj-y	:= setup.o io.o

arch/m32r/kernel/io_usrv.c → arch/m32r/platforms/usrv/io.c

@@ -1,5 +1,5 @@
 /*
- *  linux/arch/m32r/kernel/io_usrv.c
+ *  linux/arch/m32r/platforms/usrv/io.c
  *
  *  Typical I/O routines for uServer board.
  *
@@ -17,7 +17,7 @@
 #include <asm/io.h>
 
 #include <linux/types.h>
-#include "../drivers/m32r_cfc.h"
+#include "../../../../drivers/pcmcia/m32r_cfc.h"
 
 extern void pcc_ioread_byte(int, unsigned long, void *, size_t, size_t, int);
 extern void pcc_ioread_word(int, unsigned long, void *, size_t, size_t, int);

arch/m32r/kernel/setup_usrv.c → arch/m32r/platforms/usrv/setup.c

@@ -1,5 +1,5 @@
 /*
- *  linux/arch/m32r/kernel/setup_usrv.c
+ *  linux/arch/m32r/platforms/usrv/setup.c
  *
  *  Setup routines for MITSUBISHI uServer
  *
@@ -198,7 +198,7 @@ void __init init_IRQ(void)
 #endif  /* CONFIG_SERIAL_M32R_SIO */
 
 	/* INT#67-#71: CFC#0 IREQ on PLD */
-	for (i = 0 ; i < CONFIG_CFC_NUM ; i++ ) {
+	for (i = 0 ; i < CONFIG_M32R_CFC_NUM ; i++ ) {
 		irq_desc[PLD_IRQ_CF0 + i].status = IRQ_DISABLED;
 		irq_desc[PLD_IRQ_CF0 + i].chip = &m32700ut_pld_irq_type;
 		irq_desc[PLD_IRQ_CF0 + i].action = 0;
@@ -246,4 +246,3 @@ void __init init_IRQ(void)
 	icu_data[M32R_IRQ_INT1].icucr = M32R_ICUCR_ISMOD11;
 	enable_mappi_irq(M32R_IRQ_INT1);
 }
-