cnic: Add FCoE parity error recovery

When bnx2x returns error on FCoE SPQ messages, generate an error
completion to bnx2fc immediately to speed up error recovery.  This
will eliminate length timeouts and spped up the reset of the device.

Signed-off-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/broadcom/cnic.c

@@ -1,6 +1,6 @@
 /* cnic.c: Broadcom CNIC core network driver.
  *
- * Copyright (c) 2006-2011 Broadcom Corporation
+ * Copyright (c) 2006-2012 Broadcom Corporation
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -2521,12 +2521,35 @@ static void cnic_bnx2x_kwqe_err(struct cnic_dev *dev, struct kwqe *kwqe)
 	u32 cid;
 	u32 opcode = KWQE_OPCODE(kwqe->kwqe_op_flag);
 	u32 layer_code = kwqe->kwqe_op_flag & KWQE_LAYER_MASK;
+	u32 kcqe_op;
 	int ulp_type;
 
 	cid = kwqe->kwqe_info0;
 	memset(&kcqe, 0, sizeof(kcqe));
 
-	if (layer_code == KWQE_FLAGS_LAYER_MASK_L5_ISCSI) {
+	if (layer_code == KWQE_FLAGS_LAYER_MASK_L5_FCOE) {
+		u32 l5_cid = 0;
+
+		ulp_type = CNIC_ULP_FCOE;
+		if (opcode == FCOE_KWQE_OPCODE_DISABLE_CONN) {
+			struct fcoe_kwqe_conn_enable_disable *req;
+
+			req = (struct fcoe_kwqe_conn_enable_disable *) kwqe;
+			kcqe_op = FCOE_KCQE_OPCODE_DISABLE_CONN;
+			cid = req->context_id;
+			l5_cid = req->conn_id;
+		} else if (opcode == FCOE_KWQE_OPCODE_DESTROY) {
+			kcqe_op = FCOE_KCQE_OPCODE_DESTROY_FUNC;
+		} else {
+			return;
+		}
+		kcqe.kcqe_op_flag = kcqe_op << KCQE_FLAGS_OPCODE_SHIFT;
+		kcqe.kcqe_op_flag |= KCQE_FLAGS_LAYER_MASK_L5_FCOE;
+		kcqe.kcqe_info1 = FCOE_KCQE_COMPLETION_STATUS_NIC_ERROR;
+		kcqe.kcqe_info2 = cid;
+		kcqe.kcqe_info0 = l5_cid;
+
+	} else if (layer_code == KWQE_FLAGS_LAYER_MASK_L5_ISCSI) {
 		ulp_type = CNIC_ULP_ISCSI;
 		if (opcode == ISCSI_KWQE_OPCODE_UPDATE_CONN)
 			cid = kwqe->kwqe_info1;
@@ -2539,7 +2562,6 @@ static void cnic_bnx2x_kwqe_err(struct cnic_dev *dev, struct kwqe *kwqe)
 
 	} else if (layer_code == KWQE_FLAGS_LAYER_MASK_L4) {
 		struct l4_kcq *l4kcqe = (struct l4_kcq *) &kcqe;
-		u32 kcqe_op;
 
 		ulp_type = CNIC_ULP_L4;
 		if (opcode == L4_KWQE_OPCODE_VALUE_CONNECT1)
@@ -2686,9 +2708,17 @@ static int cnic_submit_bnx2x_fcoe_kwqes(struct cnic_dev *dev,
 				   opcode);
 			break;
 		}
-		if (ret < 0)
+		if (ret < 0) {
 			netdev_err(dev->netdev, "KWQE(0x%x) failed\n",
 				   opcode);
+
+			/* Possibly bnx2x parity error, send completion
+			 * to ulp drivers with error code to speed up
+			 * cleanup and reset recovery.
+			 */
+			if (ret == -EIO || ret == -EAGAIN)
+				cnic_bnx2x_kwqe_err(dev, kwqe);
+		}
 		i += work;
 	}
 	return 0;

drivers/net/ethernet/broadcom/cnic_defs.h

@@ -1,7 +1,7 @@
 
 /* cnic.c: Broadcom CNIC core network driver.
  *
- * Copyright (c) 2006-2009 Broadcom Corporation
+ * Copyright (c) 2006-2012 Broadcom Corporation
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -69,6 +69,7 @@
 
 #define FCOE_KCQE_COMPLETION_STATUS_ERROR	(0x1)
 #define FCOE_KCQE_COMPLETION_STATUS_CTX_ALLOC_FAILURE	(0x3)
+#define FCOE_KCQE_COMPLETION_STATUS_NIC_ERROR	(0x5)
 
 /* KCQ (kernel completion queue) response op codes */
 #define L4_KCQE_OPCODE_VALUE_CLOSE_COMP             (53)