Merge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: (27 commits)
  pata_atiixp: Don't disable
  sata_inic162x: update intro comment, up the version and drop EXPERIMENTAL
  sata_inic162x: add cardbus support
  sata_inic162x: kill now unused SFF related stuff
  sata_inic162x: use IDMA for ATAPI commands
  sata_inic162x: use IDMA for non DMA ATA commands
  sata_inic162x: kill now unused bmdma related stuff
  sata_inic162x: use IDMA for ATA_PROT_DMA
  sata_inic162x: update TF read handling
  sata_inic162x: add / update constants
  sata_inic162x: misc clean ups
  sata_mv use hweight16() for bit counting (V2)
  sata_mv NCQ-EH for FIS-based switching
  sata_mv delayed eh handling
  libata: export ata_eh_analyze_ncq_error
  sata_mv new mv_port_intr function
  sata_mv fix mv_host_intr bug for hc_irq_cause
  sata_mv NCQ and SError fixes for mv_err_intr
  sata_mv rearrange mv_config_fbs
  sata_mv errata workaround for sata25 part 1
  ...

drivers/ata/Kconfig

@@ -205,8 +205,8 @@ config SATA_VITESSE
 	  If unsure, say N.
 
 config SATA_INIC162X
-	tristate "Initio 162x SATA support (HIGHLY EXPERIMENTAL)"
-	depends on PCI && EXPERIMENTAL
+	tristate "Initio 162x SATA support"
+	depends on PCI
 	help
 	  This option enables support for Initio 162x Serial ATA.
 
@@ -697,6 +697,15 @@ config PATA_SCC
 
 	  If unsure, say N.
 
+config PATA_SCH
+	tristate "Intel SCH PATA support"
+	depends on PCI
+	help
+	  This option enables support for Intel SCH PATA on the Intel
+	  SCH (US15W, US15L, UL11L) series host controllers.
+
+	  If unsure, say N.
+
 config PATA_BF54X
 	tristate "Blackfin 54x ATAPI support"
 	depends on BF542 || BF548 || BF549

drivers/ata/Makefile

@@ -67,6 +67,7 @@ obj-$(CONFIG_PATA_SIS)		+= pata_sis.o
 obj-$(CONFIG_PATA_TRIFLEX)	+= pata_triflex.o
 obj-$(CONFIG_PATA_IXP4XX_CF)	+= pata_ixp4xx_cf.o
 obj-$(CONFIG_PATA_SCC)		+= pata_scc.o
+obj-$(CONFIG_PATA_SCH)		+= pata_sch.o
 obj-$(CONFIG_PATA_BF54X)	+= pata_bf54x.o
 obj-$(CONFIG_PATA_PLATFORM)	+= pata_platform.o
 obj-$(CONFIG_PATA_OF_PLATFORM)	+= pata_of_platform.o

drivers/ata/ahci.c

@@ -1267,9 +1267,7 @@ static int ahci_check_ready(struct ata_link *link)
 	void __iomem *port_mmio = ahci_port_base(link->ap);
 	u8 status = readl(port_mmio + PORT_TFDATA) & 0xFF;
 
-	if (!(status & ATA_BUSY))
-		return 1;
-	return 0;
+	return ata_check_ready(status);
 }
 
 static int ahci_softreset(struct ata_link *link, unsigned int *class,

drivers/ata/ata_generic.c

@@ -152,6 +152,12 @@ static int ata_generic_init_one(struct pci_dev *dev, const struct pci_device_id
 	if (dev->vendor == PCI_VENDOR_ID_AL)
 		ata_pci_bmdma_clear_simplex(dev);
 
+	if (dev->vendor == PCI_VENDOR_ID_ATI) {
+		int rc = pcim_enable_device(dev);
+		if (rc < 0)
+			return rc;
+		pcim_pin_device(dev);
+	}
 	return ata_pci_sff_init_one(dev, ppi, &generic_sht, NULL);
 }
 

drivers/ata/ata_piix.c

@@ -1348,6 +1348,8 @@ static void __devinit piix_init_sidpr(struct ata_host *host)
 {
 	struct pci_dev *pdev = to_pci_dev(host->dev);
 	struct piix_host_priv *hpriv = host->private_data;
+	struct ata_device *dev0 = &host->ports[0]->link.device[0];
+	u32 scontrol;
 	int i;
 
 	/* check for availability */
@@ -1366,6 +1368,29 @@ static void __devinit piix_init_sidpr(struct ata_host *host)
 		return;
 
 	hpriv->sidpr = pcim_iomap_table(pdev)[PIIX_SIDPR_BAR];
+
+	/* SCR access via SIDPR doesn't work on some configurations.
+	 * Give it a test drive by inhibiting power save modes which
+	 * we'll do anyway.
+	 */
+	scontrol = piix_sidpr_read(dev0, SCR_CONTROL);
+
+	/* if IPM is already 3, SCR access is probably working.  Don't
+	 * un-inhibit power save modes as BIOS might have inhibited
+	 * them for a reason.
+	 */
+	if ((scontrol & 0xf00) != 0x300) {
+		scontrol |= 0x300;
+		piix_sidpr_write(dev0, SCR_CONTROL, scontrol);
+		scontrol = piix_sidpr_read(dev0, SCR_CONTROL);
+
+		if ((scontrol & 0xf00) != 0x300) {
+			dev_printk(KERN_INFO, host->dev, "SCR access via "
+				   "SIDPR is available but doesn't work\n");
+			return;
+		}
+	}
+
 	host->ports[0]->ops = &piix_sidpr_sata_ops;
 	host->ports[1]->ops = &piix_sidpr_sata_ops;
 }

drivers/ata/libata-core.c

@@ -6292,6 +6292,7 @@ EXPORT_SYMBOL_GPL(ata_eh_freeze_port);
 EXPORT_SYMBOL_GPL(ata_eh_thaw_port);
 EXPORT_SYMBOL_GPL(ata_eh_qc_complete);
 EXPORT_SYMBOL_GPL(ata_eh_qc_retry);
+EXPORT_SYMBOL_GPL(ata_eh_analyze_ncq_error);
 EXPORT_SYMBOL_GPL(ata_do_eh);
 EXPORT_SYMBOL_GPL(ata_std_error_handler);
 

drivers/ata/libata-eh.c

@@ -1357,7 +1357,7 @@ static void ata_eh_analyze_serror(struct ata_link *link)
  *	LOCKING:
  *	Kernel thread context (may sleep).
  */
-static void ata_eh_analyze_ncq_error(struct ata_link *link)
+void ata_eh_analyze_ncq_error(struct ata_link *link)
 {
 	struct ata_port *ap = link->ap;
 	struct ata_eh_context *ehc = &link->eh_context;

drivers/ata/libata-sff.c

@@ -314,11 +314,7 @@ static int ata_sff_check_ready(struct ata_link *link)
 {
 	u8 status = link->ap->ops->sff_check_status(link->ap);
 
-	if (!(status & ATA_BUSY))
-		return 1;
-	if (status == 0xff)
-		return -ENODEV;
-	return 0;
+	return ata_check_ready(status);
 }
 
 /**

drivers/ata/pata_acpi.c

@@ -259,6 +259,12 @@ static int pacpi_init_one (struct pci_dev *pdev, const struct pci_device_id *id)
 		.port_ops	= &pacpi_ops,
 	};
 	const struct ata_port_info *ppi[] = { &info, NULL };
+	if (pdev->vendor == PCI_VENDOR_ID_ATI) {
+		int rc = pcim_enable_device(pdev);
+		if (rc < 0)
+			return rc;
+		pcim_pin_device(pdev);
+	}
 	return ata_pci_sff_init_one(pdev, ppi, &pacpi_sht, NULL);
 }
 

drivers/ata/pata_sch.c

@@ -0,0 +1,206 @@
+/*
+ *  pata_sch.c - Intel SCH PATA controllers
+ *
+ *  Copyright (c) 2008 Alek Du <alek.du@intel.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License 2 as published
+ *  by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; see the file COPYING.  If not, write to
+ *  the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+/*
+ *  Supports:
+ *    Intel SCH (AF82US15W, AF82US15L, AF82UL11L) chipsets -- see spec at:
+ *    http://download.intel.com/design/chipsets/embedded/datashts/319537.pdf
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/blkdev.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <scsi/scsi_host.h>
+#include <linux/libata.h>
+#include <linux/dmi.h>
+
+#define DRV_NAME	"pata_sch"
+#define DRV_VERSION	"0.2"
+
+/* see SCH datasheet page 351 */
+enum {
+	D0TIM	= 0x80,		/* Device 0 Timing Register */
+	D1TIM	= 0x84,		/* Device 1 Timing Register */
+	PM	= 0x07,		/* PIO Mode Bit Mask */
+	MDM	= (0x03 << 8),	/* Multi-word DMA Mode Bit Mask */
+	UDM	= (0x07 << 16), /* Ultra DMA Mode Bit Mask */
+	PPE	= (1 << 30),	/* Prefetch/Post Enable */
+	USD	= (1 << 31),	/* Use Synchronous DMA */
+};
+
+static int sch_init_one(struct pci_dev *pdev,
+			 const struct pci_device_id *ent);
+static void sch_set_piomode(struct ata_port *ap, struct ata_device *adev);
+static void sch_set_dmamode(struct ata_port *ap, struct ata_device *adev);
+
+static const struct pci_device_id sch_pci_tbl[] = {
+	/* Intel SCH PATA Controller */
+	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_SCH_IDE), 0 },
+	{ }	/* terminate list */
+};
+
+static struct pci_driver sch_pci_driver = {
+	.name			= DRV_NAME,
+	.id_table		= sch_pci_tbl,
+	.probe			= sch_init_one,
+	.remove			= ata_pci_remove_one,
+#ifdef CONFIG_PM
+	.suspend		= ata_pci_device_suspend,
+	.resume			= ata_pci_device_resume,
+#endif
+};
+
+static struct scsi_host_template sch_sht = {
+	ATA_BMDMA_SHT(DRV_NAME),
+};
+
+static struct ata_port_operations sch_pata_ops = {
+	.inherits		= &ata_bmdma_port_ops,
+	.cable_detect		= ata_cable_unknown,
+	.set_piomode		= sch_set_piomode,
+	.set_dmamode		= sch_set_dmamode,
+};
+
+static struct ata_port_info sch_port_info = {
+	.flags		= 0,
+	.pio_mask	= ATA_PIO4,   /* pio0-4 */
+	.mwdma_mask	= ATA_MWDMA2, /* mwdma0-2 */
+	.udma_mask	= ATA_UDMA5,  /* udma0-5 */
+	.port_ops	= &sch_pata_ops,
+};
+
+MODULE_AUTHOR("Alek Du <alek.du@intel.com>");
+MODULE_DESCRIPTION("SCSI low-level driver for Intel SCH PATA controllers");
+MODULE_LICENSE("GPL");
+MODULE_DEVICE_TABLE(pci, sch_pci_tbl);
+MODULE_VERSION(DRV_VERSION);
+
+/**
+ *	sch_set_piomode - Initialize host controller PATA PIO timings
+ *	@ap: Port whose timings we are configuring
+ *	@adev: ATA device
+ *
+ *	Set PIO mode for device, in host controller PCI config space.
+ *
+ *	LOCKING:
+ *	None (inherited from caller).
+ */
+
+static void sch_set_piomode(struct ata_port *ap, struct ata_device *adev)
+{
+	unsigned int pio	= adev->pio_mode - XFER_PIO_0;
+	struct pci_dev *dev	= to_pci_dev(ap->host->dev);
+	unsigned int port	= adev->devno ? D1TIM : D0TIM;
+	unsigned int data;
+
+	pci_read_config_dword(dev, port, &data);
+	/* see SCH datasheet page 351 */
+	/* set PIO mode */
+	data &= ~(PM | PPE);
+	data |= pio;
+	/* enable PPE for block device */
+	if (adev->class == ATA_DEV_ATA)
+		data |= PPE;
+	pci_write_config_dword(dev, port, data);
+}
+
+/**
+ *	sch_set_dmamode - Initialize host controller PATA DMA timings
+ *	@ap: Port whose timings we are configuring
+ *	@adev: ATA device
+ *
+ *	Set MW/UDMA mode for device, in host controller PCI config space.
+ *
+ *	LOCKING:
+ *	None (inherited from caller).
+ */
+
+static void sch_set_dmamode(struct ata_port *ap, struct ata_device *adev)
+{
+	unsigned int dma_mode	= adev->dma_mode;
+	struct pci_dev *dev	= to_pci_dev(ap->host->dev);
+	unsigned int port	= adev->devno ? D1TIM : D0TIM;
+	unsigned int data;
+
+	pci_read_config_dword(dev, port, &data);
+	/* see SCH datasheet page 351 */
+	if (dma_mode >= XFER_UDMA_0) {
+		/* enable Synchronous DMA mode */
+		data |= USD;
+		data &= ~UDM;
+		data |= (dma_mode - XFER_UDMA_0) << 16;
+	} else { /* must be MWDMA mode, since we masked SWDMA already */
+		data &= ~(USD | MDM);
+		data |= (dma_mode - XFER_MW_DMA_0) << 8;
+	}
+	pci_write_config_dword(dev, port, data);
+}
+
+/**
+ *	sch_init_one - Register SCH ATA PCI device with kernel services
+ *	@pdev: PCI device to register
+ *	@ent: Entry in sch_pci_tbl matching with @pdev
+ *
+ *	LOCKING:
+ *	Inherited from PCI layer (may sleep).
+ *
+ *	RETURNS:
+ *	Zero on success, or -ERRNO value.
+ */
+
+static int __devinit sch_init_one(struct pci_dev *pdev,
+				   const struct pci_device_id *ent)
+{
+	static int printed_version;
+	const struct ata_port_info *ppi[] = { &sch_port_info, NULL };
+	struct ata_host *host;
+	int rc;
+
+	if (!printed_version++)
+		dev_printk(KERN_DEBUG, &pdev->dev,
+			   "version " DRV_VERSION "\n");
+
+	/* enable device and prepare host */
+	rc = pcim_enable_device(pdev);
+	if (rc)
+		return rc;
+	rc = ata_pci_sff_prepare_host(pdev, ppi, &host);
+	if (rc)
+		return rc;
+	pci_set_master(pdev);
+	return ata_pci_sff_activate_host(host, ata_sff_interrupt, &sch_sht);
+}
+
+static int __init sch_init(void)
+{
+	return pci_register_driver(&sch_pci_driver);
+}
+
+static void __exit sch_exit(void)
+{
+	pci_unregister_driver(&sch_pci_driver);
+}
+
+module_init(sch_init);
+module_exit(sch_exit);

drivers/ata/sata_inic162x.c

@@ -10,13 +10,33 @@
  * right.  Documentation is available at initio's website but it only
  * documents registers (not programming model).
  *
- * - ATA disks work.
- * - Hotplug works.
- * - ATAPI read works but burning doesn't.  This thing is really
- *   peculiar about ATAPI and I couldn't figure out how ATAPI PIO and
- *   ATAPI DMA WRITE should be programmed.  If you've got a clue, be
- *   my guest.
- * - Both STR and STD work.
+ * This driver has interesting history.  The first version was written
+ * from the documentation and a 2.4 IDE driver posted on a Taiwan
+ * company, which didn't use any IDMA features and couldn't handle
+ * LBA48.  The resulting driver couldn't handle LBA48 devices either
+ * making it pretty useless.
+ *
+ * After a while, initio picked the driver up, renamed it to
+ * sata_initio162x, updated it to use IDMA for ATA DMA commands and
+ * posted it on their website.  It only used ATA_PROT_DMA for IDMA and
+ * attaching both devices and issuing IDMA and !IDMA commands
+ * simultaneously broke it due to PIRQ masking interaction but it did
+ * show how to use the IDMA (ADMA + some initio specific twists)
+ * engine.
+ *
+ * Then, I picked up their changes again and here's the usable driver
+ * which uses IDMA for everything.  Everything works now including
+ * LBA48, CD/DVD burning, suspend/resume and hotplug.  There are some
+ * issues tho.  Result Tf is not resported properly, NCQ isn't
+ * supported yet and CD/DVD writing works with DMA assisted PIO
+ * protocol (which, for native SATA devices, shouldn't cause any
+ * noticeable difference).
+ *
+ * Anyways, so, here's finally a working driver for inic162x.  Enjoy!
+ *
+ * initio: If you guys wanna improve the driver regarding result TF
+ * access and other stuff, please feel free to contact me.  I'll be
+ * happy to assist.
  */
 
 #include <linux/kernel.h>
@@ -28,13 +48,19 @@
 #include <scsi/scsi_device.h>
 
 #define DRV_NAME	"sata_inic162x"
-#define DRV_VERSION	"0.3"
+#define DRV_VERSION	"0.4"
 
 enum {
-	MMIO_BAR		= 5,
+	MMIO_BAR_PCI		= 5,
+	MMIO_BAR_CARDBUS	= 1,
 
 	NR_PORTS		= 2,
 
+	IDMA_CPB_TBL_SIZE	= 4 * 32,
+
+	INIC_DMA_BOUNDARY	= 0xffffff,
+
+	HOST_ACTRL		= 0x08,
 	HOST_CTL		= 0x7c,
 	HOST_STAT		= 0x7e,
 	HOST_IRQ_STAT		= 0xbc,
@@ -43,22 +69,37 @@ enum {
 	PORT_SIZE		= 0x40,
 
 	/* registers for ATA TF operation */
-	PORT_TF			= 0x00,
-	PORT_ALT_STAT		= 0x08,
+	PORT_TF_DATA		= 0x00,
+	PORT_TF_FEATURE		= 0x01,
+	PORT_TF_NSECT		= 0x02,
+	PORT_TF_LBAL		= 0x03,
+	PORT_TF_LBAM		= 0x04,
+	PORT_TF_LBAH		= 0x05,
+	PORT_TF_DEVICE		= 0x06,
+	PORT_TF_COMMAND		= 0x07,
+	PORT_TF_ALT_STAT	= 0x08,
 	PORT_IRQ_STAT		= 0x09,
 	PORT_IRQ_MASK		= 0x0a,
 	PORT_PRD_CTL		= 0x0b,
 	PORT_PRD_ADDR		= 0x0c,
 	PORT_PRD_XFERLEN	= 0x10,
+	PORT_CPB_CPBLAR		= 0x18,
+	PORT_CPB_PTQFIFO	= 0x1c,
 
 	/* IDMA register */
 	PORT_IDMA_CTL		= 0x14,
+	PORT_IDMA_STAT		= 0x16,
+
+	PORT_RPQ_FIFO		= 0x1e,
+	PORT_RPQ_CNT		= 0x1f,
 
 	PORT_SCR		= 0x20,
 
 	/* HOST_CTL bits */
 	HCTL_IRQOFF		= (1 << 8),  /* global IRQ off */
-	HCTL_PWRDWN		= (1 << 13), /* power down PHYs */
+	HCTL_FTHD0		= (1 << 10), /* fifo threshold 0 */
+	HCTL_FTHD1		= (1 << 11), /* fifo threshold 1*/
+	HCTL_PWRDWN		= (1 << 12), /* power down PHYs */
 	HCTL_SOFTRST		= (1 << 13), /* global reset (no phy reset) */
 	HCTL_RPGSEL		= (1 << 15), /* register page select */
 
@@ -81,9 +122,7 @@ enum {
 	PIRQ_PENDING		= (1 << 7),  /* port IRQ pending (STAT only) */
 
 	PIRQ_ERR		= PIRQ_OFFLINE | PIRQ_ONLINE | PIRQ_FATAL,
-
-	PIRQ_MASK_DMA_READ	= PIRQ_REPLY | PIRQ_ATA,
-	PIRQ_MASK_OTHER		= PIRQ_REPLY | PIRQ_COMPLETE,
+	PIRQ_MASK_DEFAULT	= PIRQ_REPLY | PIRQ_ATA,
 	PIRQ_MASK_FREEZE	= 0xff,
 
 	/* PORT_PRD_CTL bits */
@@ -96,20 +135,104 @@ enum {
 	IDMA_CTL_RST_IDMA	= (1 << 5),  /* reset IDMA machinary */
 	IDMA_CTL_GO		= (1 << 7),  /* IDMA mode go */
 	IDMA_CTL_ATA_NIEN	= (1 << 8),  /* ATA IRQ disable */
+
+	/* PORT_IDMA_STAT bits */
+	IDMA_STAT_PERR		= (1 << 0),  /* PCI ERROR MODE */
+	IDMA_STAT_CPBERR	= (1 << 1),  /* ADMA CPB error */
+	IDMA_STAT_LGCY		= (1 << 3),  /* ADMA legacy */
+	IDMA_STAT_UIRQ		= (1 << 4),  /* ADMA unsolicited irq */
+	IDMA_STAT_STPD		= (1 << 5),  /* ADMA stopped */
+	IDMA_STAT_PSD		= (1 << 6),  /* ADMA pause */
+	IDMA_STAT_DONE		= (1 << 7),  /* ADMA done */
+
+	IDMA_STAT_ERR		= IDMA_STAT_PERR | IDMA_STAT_CPBERR,
+
+	/* CPB Control Flags*/
+	CPB_CTL_VALID		= (1 << 0),  /* CPB valid */
+	CPB_CTL_QUEUED		= (1 << 1),  /* queued command */
+	CPB_CTL_DATA		= (1 << 2),  /* data, rsvd in datasheet */
+	CPB_CTL_IEN		= (1 << 3),  /* PCI interrupt enable */
+	CPB_CTL_DEVDIR		= (1 << 4),  /* device direction control */
+
+	/* CPB Response Flags */
+	CPB_RESP_DONE		= (1 << 0),  /* ATA command complete */
+	CPB_RESP_REL		= (1 << 1),  /* ATA release */
+	CPB_RESP_IGNORED	= (1 << 2),  /* CPB ignored */
+	CPB_RESP_ATA_ERR	= (1 << 3),  /* ATA command error */
+	CPB_RESP_SPURIOUS	= (1 << 4),  /* ATA spurious interrupt error */
+	CPB_RESP_UNDERFLOW	= (1 << 5),  /* APRD deficiency length error */
+	CPB_RESP_OVERFLOW	= (1 << 6),  /* APRD exccess length error */
+	CPB_RESP_CPB_ERR	= (1 << 7),  /* CPB error flag */
+
+	/* PRD Control Flags */
+	PRD_DRAIN		= (1 << 1),  /* ignore data excess */
+	PRD_CDB			= (1 << 2),  /* atapi packet command pointer */
+	PRD_DIRECT_INTR		= (1 << 3),  /* direct interrupt */
+	PRD_DMA			= (1 << 4),  /* data transfer method */
+	PRD_WRITE		= (1 << 5),  /* data dir, rsvd in datasheet */
+	PRD_IOM			= (1 << 6),  /* io/memory transfer */
+	PRD_END			= (1 << 7),  /* APRD chain end */
 };
 
+/* Comman Parameter Block */
+struct inic_cpb {
+	u8		resp_flags;	/* Response Flags */
+	u8		error;		/* ATA Error */
+	u8		status;		/* ATA Status */
+	u8		ctl_flags;	/* Control Flags */
+	__le32		len;		/* Total Transfer Length */
+	__le32		prd;		/* First PRD pointer */
+	u8		rsvd[4];
+	/* 16 bytes */
+	u8		feature;	/* ATA Feature */
+	u8		hob_feature;	/* ATA Ex. Feature */
+	u8		device;		/* ATA Device/Head */
+	u8		mirctl;		/* Mirror Control */
+	u8		nsect;		/* ATA Sector Count */
+	u8		hob_nsect;	/* ATA Ex. Sector Count */
+	u8		lbal;		/* ATA Sector Number */
+	u8		hob_lbal;	/* ATA Ex. Sector Number */
+	u8		lbam;		/* ATA Cylinder Low */
+	u8		hob_lbam;	/* ATA Ex. Cylinder Low */
+	u8		lbah;		/* ATA Cylinder High */
+	u8		hob_lbah;	/* ATA Ex. Cylinder High */
+	u8		command;	/* ATA Command */
+	u8		ctl;		/* ATA Control */
+	u8		slave_error;	/* Slave ATA Error */
+	u8		slave_status;	/* Slave ATA Status */
+	/* 32 bytes */
+} __packed;
+
+/* Physical Region Descriptor */
+struct inic_prd {
+	__le32		mad;		/* Physical Memory Address */
+	__le16		len;		/* Transfer Length */
+	u8		rsvd;
+	u8		flags;		/* Control Flags */
+} __packed;
+
+struct inic_pkt {
+	struct inic_cpb	cpb;
+	struct inic_prd	prd[LIBATA_MAX_PRD + 1];	/* + 1 for cdb */
+	u8		cdb[ATAPI_CDB_LEN];
+} __packed;
+
 struct inic_host_priv {
-	u16	cached_hctl;
+	void __iomem	*mmio_base;
+	u16		cached_hctl;
 };
 
 struct inic_port_priv {
-	u8	dfl_prdctl;
-	u8	cached_prdctl;
-	u8	cached_pirq_mask;
+	struct inic_pkt	*pkt;
+	dma_addr_t	pkt_dma;
+	u32		*cpb_tbl;
+	dma_addr_t	cpb_tbl_dma;
 };
 
 static struct scsi_host_template inic_sht = {
-	ATA_BMDMA_SHT(DRV_NAME),
+	ATA_BASE_SHT(DRV_NAME),
+	.sg_tablesize	= LIBATA_MAX_PRD,	/* maybe it can be larger? */
+	.dma_boundary	= INIC_DMA_BOUNDARY,
 };
 
 static const int scr_map[] = {
@@ -120,54 +243,34 @@ static const int scr_map[] = {
 
 static void __iomem *inic_port_base(struct ata_port *ap)
 {
-	return ap->host->iomap[MMIO_BAR] + ap->port_no * PORT_SIZE;
-}
-
-static void __inic_set_pirq_mask(struct ata_port *ap, u8 mask)
-{
-	void __iomem *port_base = inic_port_base(ap);
-	struct inic_port_priv *pp = ap->private_data;
+	struct inic_host_priv *hpriv = ap->host->private_data;
 
-	writeb(mask, port_base + PORT_IRQ_MASK);
-	pp->cached_pirq_mask = mask;
-}
-
-static void inic_set_pirq_mask(struct ata_port *ap, u8 mask)
-{
-	struct inic_port_priv *pp = ap->private_data;
-
-	if (pp->cached_pirq_mask != mask)
-		__inic_set_pirq_mask(ap, mask);
+	return hpriv->mmio_base + ap->port_no * PORT_SIZE;
 }
 
 static void inic_reset_port(void __iomem *port_base)
 {
 	void __iomem *idma_ctl = port_base + PORT_IDMA_CTL;
-	u16 ctl;
 
-	ctl = readw(idma_ctl);
-	ctl &= ~(IDMA_CTL_RST_IDMA | IDMA_CTL_ATA_NIEN | IDMA_CTL_GO);
+	/* stop IDMA engine */
+	readw(idma_ctl); /* flush */
+	msleep(1);
 
 	/* mask IRQ and assert reset */
-	writew(ctl | IDMA_CTL_RST_IDMA | IDMA_CTL_ATA_NIEN, idma_ctl);
+	writew(IDMA_CTL_RST_IDMA, idma_ctl);
 	readw(idma_ctl); /* flush */
-
-	/* give it some time */
 	msleep(1);
 
 	/* release reset */
-	writew(ctl | IDMA_CTL_ATA_NIEN, idma_ctl);
+	writew(0, idma_ctl);
 
 	/* clear irq */
 	writeb(0xff, port_base + PORT_IRQ_STAT);
-
-	/* reenable ATA IRQ, turn off IDMA mode */
-	writew(ctl, idma_ctl);
 }
 
 static int inic_scr_read(struct ata_port *ap, unsigned sc_reg, u32 *val)
 {
-	void __iomem *scr_addr = ap->ioaddr.scr_addr;
+	void __iomem *scr_addr = inic_port_base(ap) + PORT_SCR;
 	void __iomem *addr;
 
 	if (unlikely(sc_reg >= ARRAY_SIZE(scr_map)))
@@ -184,120 +287,126 @@ static int inic_scr_read(struct ata_port *ap, unsigned sc_reg, u32 *val)
 
 static int inic_scr_write(struct ata_port *ap, unsigned sc_reg, u32 val)
 {
-	void __iomem *scr_addr = ap->ioaddr.scr_addr;
-	void __iomem *addr;
+	void __iomem *scr_addr = inic_port_base(ap) + PORT_SCR;
 
 	if (unlikely(sc_reg >= ARRAY_SIZE(scr_map)))
 		return -EINVAL;
 
-	addr = scr_addr + scr_map[sc_reg] * 4;
 	writel(val, scr_addr + scr_map[sc_reg] * 4);
 	return 0;
 }
 
-/*
- * In TF mode, inic162x is very similar to SFF device.  TF registers
- * function the same.  DMA engine behaves similary using the same PRD
- * format as BMDMA but different command register, interrupt and event
- * notification methods are used.  The following inic_bmdma_*()
- * functions do the impedance matching.
- */
-static void inic_bmdma_setup(struct ata_queued_cmd *qc)
+static void inic_stop_idma(struct ata_port *ap)
 {
-	struct ata_port *ap = qc->ap;
-	struct inic_port_priv *pp = ap->private_data;
 	void __iomem *port_base = inic_port_base(ap);
-	int rw = qc->tf.flags & ATA_TFLAG_WRITE;
-
-	/* make sure device sees PRD table writes */
-	wmb();
-
-	/* load transfer length */
-	writel(qc->nbytes, port_base + PORT_PRD_XFERLEN);
-
-	/* turn on DMA and specify data direction */
-	pp->cached_prdctl = pp->dfl_prdctl | PRD_CTL_DMAEN;
-	if (!rw)
-		pp->cached_prdctl |= PRD_CTL_WR;
-	writeb(pp->cached_prdctl, port_base + PORT_PRD_CTL);
 
-	/* issue r/w command */
-	ap->ops->sff_exec_command(ap, &qc->tf);
+	readb(port_base + PORT_RPQ_FIFO);
+	readb(port_base + PORT_RPQ_CNT);
+	writew(0, port_base + PORT_IDMA_CTL);
 }
 
-static void inic_bmdma_start(struct ata_queued_cmd *qc)
+static void inic_host_err_intr(struct ata_port *ap, u8 irq_stat, u16 idma_stat)
 {
-	struct ata_port *ap = qc->ap;
+	struct ata_eh_info *ehi = &ap->link.eh_info;
 	struct inic_port_priv *pp = ap->private_data;
-	void __iomem *port_base = inic_port_base(ap);
+	struct inic_cpb *cpb = &pp->pkt->cpb;
+	bool freeze = false;
 
-	/* start host DMA transaction */
-	pp->cached_prdctl |= PRD_CTL_START;
-	writeb(pp->cached_prdctl, port_base + PORT_PRD_CTL);
-}
+	ata_ehi_clear_desc(ehi);
+	ata_ehi_push_desc(ehi, "irq_stat=0x%x idma_stat=0x%x",
+			  irq_stat, idma_stat);
 
-static void inic_bmdma_stop(struct ata_queued_cmd *qc)
-{
-	struct ata_port *ap = qc->ap;
-	struct inic_port_priv *pp = ap->private_data;
-	void __iomem *port_base = inic_port_base(ap);
+	inic_stop_idma(ap);
 
-	/* stop DMA engine */
-	writeb(pp->dfl_prdctl, port_base + PORT_PRD_CTL);
-}
+	if (irq_stat & (PIRQ_OFFLINE | PIRQ_ONLINE)) {
+		ata_ehi_push_desc(ehi, "hotplug");
+		ata_ehi_hotplugged(ehi);
+		freeze = true;
+	}
 
-static u8 inic_bmdma_status(struct ata_port *ap)
-{
-	/* event is already verified by the interrupt handler */
-	return ATA_DMA_INTR;
+	if (idma_stat & IDMA_STAT_PERR) {
+		ata_ehi_push_desc(ehi, "PCI error");
+		freeze = true;
+	}
+
+	if (idma_stat & IDMA_STAT_CPBERR) {
+		ata_ehi_push_desc(ehi, "CPB error");
+
+		if (cpb->resp_flags & CPB_RESP_IGNORED) {
+			__ata_ehi_push_desc(ehi, " ignored");
+			ehi->err_mask |= AC_ERR_INVALID;
+			freeze = true;
+		}
+
+		if (cpb->resp_flags & CPB_RESP_ATA_ERR)
+			ehi->err_mask |= AC_ERR_DEV;
+
+		if (cpb->resp_flags & CPB_RESP_SPURIOUS) {
+			__ata_ehi_push_desc(ehi, " spurious-intr");
+			ehi->err_mask |= AC_ERR_HSM;
+			freeze = true;
+		}
+
+		if (cpb->resp_flags &
+		    (CPB_RESP_UNDERFLOW | CPB_RESP_OVERFLOW)) {
+			__ata_ehi_push_desc(ehi, " data-over/underflow");
+			ehi->err_mask |= AC_ERR_HSM;
+			freeze = true;
+		}
+	}
+
+	if (freeze)
+		ata_port_freeze(ap);
+	else
+		ata_port_abort(ap);
 }
 
 static void inic_host_intr(struct ata_port *ap)
 {
 	void __iomem *port_base = inic_port_base(ap);
-	struct ata_eh_info *ehi = &ap->link.eh_info;
+	struct ata_queued_cmd *qc = ata_qc_from_tag(ap, ap->link.active_tag);
 	u8 irq_stat;
+	u16 idma_stat;
 
-	/* fetch and clear irq */
+	/* read and clear IRQ status */
 	irq_stat = readb(port_base + PORT_IRQ_STAT);
 	writeb(irq_stat, port_base + PORT_IRQ_STAT);
+	idma_stat = readw(port_base + PORT_IDMA_STAT);
 
-	if (likely(!(irq_stat & PIRQ_ERR))) {
-		struct ata_queued_cmd *qc =
-			ata_qc_from_tag(ap, ap->link.active_tag);
+	if (unlikely((irq_stat & PIRQ_ERR) || (idma_stat & IDMA_STAT_ERR)))
+		inic_host_err_intr(ap, irq_stat, idma_stat);
 
-		if (unlikely(!qc || (qc->tf.flags & ATA_TFLAG_POLLING))) {
-			ap->ops->sff_check_status(ap); /* clear ATA interrupt */
-			return;
-		}
+	if (unlikely(!qc))
+		goto spurious;
 
-		if (likely(ata_sff_host_intr(ap, qc)))
-			return;
+	if (likely(idma_stat & IDMA_STAT_DONE)) {
+		inic_stop_idma(ap);
 
-		ap->ops->sff_check_status(ap); /* clear ATA interrupt */
-		ata_port_printk(ap, KERN_WARNING, "unhandled "
-				"interrupt, irq_stat=%x\n", irq_stat);
+		/* Depending on circumstances, device error
+		 * isn't reported by IDMA, check it explicitly.
+		 */
+		if (unlikely(readb(port_base + PORT_TF_COMMAND) &
+			     (ATA_DF | ATA_ERR)))
+			qc->err_mask |= AC_ERR_DEV;
+
+		ata_qc_complete(qc);
 		return;
 	}
 
-	/* error */
-	ata_ehi_push_desc(ehi, "irq_stat=0x%x", irq_stat);
-
-	if (irq_stat & (PIRQ_OFFLINE | PIRQ_ONLINE)) {
-		ata_ehi_hotplugged(ehi);
-		ata_port_freeze(ap);
-	} else
-		ata_port_abort(ap);
+ spurious:
+	ata_port_printk(ap, KERN_WARNING, "unhandled interrupt: "
+			"cmd=0x%x irq_stat=0x%x idma_stat=0x%x\n",
+			qc ? qc->tf.command : 0xff, irq_stat, idma_stat);
 }
 
 static irqreturn_t inic_interrupt(int irq, void *dev_instance)
 {
 	struct ata_host *host = dev_instance;
-	void __iomem *mmio_base = host->iomap[MMIO_BAR];
+	struct inic_host_priv *hpriv = host->private_data;
 	u16 host_irq_stat;
 	int i, handled = 0;;
 
-	host_irq_stat = readw(mmio_base + HOST_IRQ_STAT);
+	host_irq_stat = readw(hpriv->mmio_base + HOST_IRQ_STAT);
 
 	if (unlikely(!(host_irq_stat & HIRQ_GLOBAL)))
 		goto out;
@@ -327,60 +436,173 @@ static irqreturn_t inic_interrupt(int irq, void *dev_instance)
 	return IRQ_RETVAL(handled);
 }
 
+static int inic_check_atapi_dma(struct ata_queued_cmd *qc)
+{
+	/* For some reason ATAPI_PROT_DMA doesn't work for some
+	 * commands including writes and other misc ops.  Use PIO
+	 * protocol instead, which BTW is driven by the DMA engine
+	 * anyway, so it shouldn't make much difference for native
+	 * SATA devices.
+	 */
+	if (atapi_cmd_type(qc->cdb[0]) == READ)
+		return 0;
+	return 1;
+}
+
+static void inic_fill_sg(struct inic_prd *prd, struct ata_queued_cmd *qc)
+{
+	struct scatterlist *sg;
+	unsigned int si;
+	u8 flags = 0;
+
+	if (qc->tf.flags & ATA_TFLAG_WRITE)
+		flags |= PRD_WRITE;
+
+	if (ata_is_dma(qc->tf.protocol))
+		flags |= PRD_DMA;
+
+	for_each_sg(qc->sg, sg, qc->n_elem, si) {
+		prd->mad = cpu_to_le32(sg_dma_address(sg));
+		prd->len = cpu_to_le16(sg_dma_len(sg));
+		prd->flags = flags;
+		prd++;
+	}
+
+	WARN_ON(!si);
+	prd[-1].flags |= PRD_END;
+}
+
+static void inic_qc_prep(struct ata_queued_cmd *qc)
+{
+	struct inic_port_priv *pp = qc->ap->private_data;
+	struct inic_pkt *pkt = pp->pkt;
+	struct inic_cpb *cpb = &pkt->cpb;
+	struct inic_prd *prd = pkt->prd;
+	bool is_atapi = ata_is_atapi(qc->tf.protocol);
+	bool is_data = ata_is_data(qc->tf.protocol);
+	unsigned int cdb_len = 0;
+
+	VPRINTK("ENTER\n");
+
+	if (is_atapi)
+		cdb_len = qc->dev->cdb_len;
+
+	/* prepare packet, based on initio driver */
+	memset(pkt, 0, sizeof(struct inic_pkt));
+
+	cpb->ctl_flags = CPB_CTL_VALID | CPB_CTL_IEN;
+	if (is_atapi || is_data)
+		cpb->ctl_flags |= CPB_CTL_DATA;
+
+	cpb->len = cpu_to_le32(qc->nbytes + cdb_len);
+	cpb->prd = cpu_to_le32(pp->pkt_dma + offsetof(struct inic_pkt, prd));
+
+	cpb->device = qc->tf.device;
+	cpb->feature = qc->tf.feature;
+	cpb->nsect = qc->tf.nsect;
+	cpb->lbal = qc->tf.lbal;
+	cpb->lbam = qc->tf.lbam;
+	cpb->lbah = qc->tf.lbah;
+
+	if (qc->tf.flags & ATA_TFLAG_LBA48) {
+		cpb->hob_feature = qc->tf.hob_feature;
+		cpb->hob_nsect = qc->tf.hob_nsect;
+		cpb->hob_lbal = qc->tf.hob_lbal;
+		cpb->hob_lbam = qc->tf.hob_lbam;
+		cpb->hob_lbah = qc->tf.hob_lbah;
+	}
+
+	cpb->command = qc->tf.command;
+	/* don't load ctl - dunno why.  it's like that in the initio driver */
+
+	/* setup PRD for CDB */
+	if (is_atapi) {
+		memcpy(pkt->cdb, qc->cdb, ATAPI_CDB_LEN);
+		prd->mad = cpu_to_le32(pp->pkt_dma +
+				       offsetof(struct inic_pkt, cdb));
+		prd->len = cpu_to_le16(cdb_len);
+		prd->flags = PRD_CDB | PRD_WRITE;
+		if (!is_data)
+			prd->flags |= PRD_END;
+		prd++;
+	}
+
+	/* setup sg table */
+	if (is_data)
+		inic_fill_sg(prd, qc);
+
+	pp->cpb_tbl[0] = pp->pkt_dma;
+}
+
 static unsigned int inic_qc_issue(struct ata_queued_cmd *qc)
 {
 	struct ata_port *ap = qc->ap;
+	void __iomem *port_base = inic_port_base(ap);
 
-	/* ATA IRQ doesn't wait for DMA transfer completion and vice
-	 * versa.  Mask IRQ selectively to detect command completion.
-	 * Without it, ATA DMA read command can cause data corruption.
-	 *
-	 * Something similar might be needed for ATAPI writes.  I
-	 * tried a lot of combinations but couldn't find the solution.
-	 */
-	if (qc->tf.protocol == ATA_PROT_DMA &&
-	    !(qc->tf.flags & ATA_TFLAG_WRITE))
-		inic_set_pirq_mask(ap, PIRQ_MASK_DMA_READ);
-	else
-		inic_set_pirq_mask(ap, PIRQ_MASK_OTHER);
+	/* fire up the ADMA engine */
+	writew(HCTL_FTHD0, port_base + HOST_CTL);
+	writew(IDMA_CTL_GO, port_base + PORT_IDMA_CTL);
+	writeb(0, port_base + PORT_CPB_PTQFIFO);
+
+	return 0;
+}
+
+static void inic_tf_read(struct ata_port *ap, struct ata_taskfile *tf)
+{
+	void __iomem *port_base = inic_port_base(ap);
+
+	tf->feature	= readb(port_base + PORT_TF_FEATURE);
+	tf->nsect	= readb(port_base + PORT_TF_NSECT);
+	tf->lbal	= readb(port_base + PORT_TF_LBAL);
+	tf->lbam	= readb(port_base + PORT_TF_LBAM);
+	tf->lbah	= readb(port_base + PORT_TF_LBAH);
+	tf->device	= readb(port_base + PORT_TF_DEVICE);
+	tf->command	= readb(port_base + PORT_TF_COMMAND);
+}
 
-	/* Issuing a command to yet uninitialized port locks up the
-	 * controller.  Most of the time, this happens for the first
-	 * command after reset which are ATA and ATAPI IDENTIFYs.
-	 * Fast fail if stat is 0x7f or 0xff for those commands.
+static bool inic_qc_fill_rtf(struct ata_queued_cmd *qc)
+{
+	struct ata_taskfile *rtf = &qc->result_tf;
+	struct ata_taskfile tf;
+
+	/* FIXME: Except for status and error, result TF access
+	 * doesn't work.  I tried reading from BAR0/2, CPB and BAR5.
+	 * None works regardless of which command interface is used.
+	 * For now return true iff status indicates device error.
+	 * This means that we're reporting bogus sector for RW
+	 * failures.  Eeekk....
 	 */
-	if (unlikely(qc->tf.command == ATA_CMD_ID_ATA ||
-		     qc->tf.command == ATA_CMD_ID_ATAPI)) {
-		u8 stat = ap->ops->sff_check_status(ap);
-		if (stat == 0x7f || stat == 0xff)
-			return AC_ERR_HSM;
-	}
+	inic_tf_read(qc->ap, &tf);
 
-	return ata_sff_qc_issue(qc);
+	if (!(tf.command & ATA_ERR))
+		return false;
+
+	rtf->command = tf.command;
+	rtf->feature = tf.feature;
+	return true;
 }
 
 static void inic_freeze(struct ata_port *ap)
 {
 	void __iomem *port_base = inic_port_base(ap);
 
-	__inic_set_pirq_mask(ap, PIRQ_MASK_FREEZE);
-
-	ap->ops->sff_check_status(ap);
+	writeb(PIRQ_MASK_FREEZE, port_base + PORT_IRQ_MASK);
 	writeb(0xff, port_base + PORT_IRQ_STAT);
-
-	readb(port_base + PORT_IRQ_STAT); /* flush */
 }
 
 static void inic_thaw(struct ata_port *ap)
 {
 	void __iomem *port_base = inic_port_base(ap);
 
-	ap->ops->sff_check_status(ap);
 	writeb(0xff, port_base + PORT_IRQ_STAT);
+	writeb(PIRQ_MASK_DEFAULT, port_base + PORT_IRQ_MASK);
+}
 
-	__inic_set_pirq_mask(ap, PIRQ_MASK_OTHER);
+static int inic_check_ready(struct ata_link *link)
+{
+	void __iomem *port_base = inic_port_base(link->ap);
 
-	readb(port_base + PORT_IRQ_STAT); /* flush */
+	return ata_check_ready(readb(port_base + PORT_TF_COMMAND));
 }
 
 /*
@@ -394,17 +616,15 @@ static int inic_hardreset(struct ata_link *link, unsigned int *class,
 	void __iomem *port_base = inic_port_base(ap);
 	void __iomem *idma_ctl = port_base + PORT_IDMA_CTL;
 	const unsigned long *timing = sata_ehc_deb_timing(&link->eh_context);
-	u16 val;
 	int rc;
 
 	/* hammer it into sane state */
 	inic_reset_port(port_base);
 
-	val = readw(idma_ctl);
-	writew(val | IDMA_CTL_RST_ATA, idma_ctl);
+	writew(IDMA_CTL_RST_ATA, idma_ctl);
 	readw(idma_ctl);	/* flush */
 	msleep(1);
-	writew(val & ~IDMA_CTL_RST_ATA, idma_ctl);
+	writew(0, idma_ctl);
 
 	rc = sata_link_resume(link, timing, deadline);
 	if (rc) {
@@ -418,7 +638,7 @@ static int inic_hardreset(struct ata_link *link, unsigned int *class,
 		struct ata_taskfile tf;
 
 		/* wait for link to become ready */
-		rc = ata_sff_wait_after_reset(link, 1, deadline);
+		rc = ata_wait_after_reset(link, deadline, inic_check_ready);
 		/* link occupied, -ENODEV too is an error */
 		if (rc) {
 			ata_link_printk(link, KERN_WARNING, "device not ready "
@@ -426,7 +646,7 @@ static int inic_hardreset(struct ata_link *link, unsigned int *class,
 			return rc;
 		}
 
-		ata_sff_tf_read(ap, &tf);
+		inic_tf_read(ap, &tf);
 		*class = ata_dev_classify(&tf);
 	}
 
@@ -436,18 +656,8 @@ static int inic_hardreset(struct ata_link *link, unsigned int *class,
 static void inic_error_handler(struct ata_port *ap)
 {
 	void __iomem *port_base = inic_port_base(ap);
-	struct inic_port_priv *pp = ap->private_data;
-	unsigned long flags;
 
-	/* reset PIO HSM and stop DMA engine */
 	inic_reset_port(port_base);
-
-	spin_lock_irqsave(ap->lock, flags);
-	ap->hsm_task_state = HSM_ST_IDLE;
-	writeb(pp->dfl_prdctl, port_base + PORT_PRD_CTL);
-	spin_unlock_irqrestore(ap->lock, flags);
-
-	/* PIO and DMA engines have been stopped, perform recovery */
 	ata_std_error_handler(ap);
 }
 
@@ -458,26 +668,18 @@ static void inic_post_internal_cmd(struct ata_queued_cmd *qc)
 		inic_reset_port(inic_port_base(qc->ap));
 }
 
-static void inic_dev_config(struct ata_device *dev)
-{
-	/* inic can only handle upto LBA28 max sectors */
-	if (dev->max_sectors > ATA_MAX_SECTORS)
-		dev->max_sectors = ATA_MAX_SECTORS;
-
-	if (dev->n_sectors >= 1 << 28) {
-		ata_dev_printk(dev, KERN_ERR,
-	"ERROR: This driver doesn't support LBA48 yet and may cause\n"
-	"                data corruption on such devices.  Disabling.\n");
-		ata_dev_disable(dev);
-	}
-}
-
 static void init_port(struct ata_port *ap)
 {
 	void __iomem *port_base = inic_port_base(ap);
+	struct inic_port_priv *pp = ap->private_data;
 
-	/* Setup PRD address */
+	/* clear packet and CPB table */
+	memset(pp->pkt, 0, sizeof(struct inic_pkt));
+	memset(pp->cpb_tbl, 0, IDMA_CPB_TBL_SIZE);
+
+	/* setup PRD and CPB lookup table addresses */
 	writel(ap->prd_dma, port_base + PORT_PRD_ADDR);
+	writel(pp->cpb_tbl_dma, port_base + PORT_CPB_CPBLAR);
 }
 
 static int inic_port_resume(struct ata_port *ap)
@@ -488,28 +690,30 @@ static int inic_port_resume(struct ata_port *ap)
 
 static int inic_port_start(struct ata_port *ap)
 {
-	void __iomem *port_base = inic_port_base(ap);
+	struct device *dev = ap->host->dev;
 	struct inic_port_priv *pp;
-	u8 tmp;
 	int rc;
 
 	/* alloc and initialize private data */
-	pp = devm_kzalloc(ap->host->dev, sizeof(*pp), GFP_KERNEL);
+	pp = devm_kzalloc(dev, sizeof(*pp), GFP_KERNEL);
 	if (!pp)
 		return -ENOMEM;
 	ap->private_data = pp;
 
-	/* default PRD_CTL value, DMAEN, WR and START off */
-	tmp = readb(port_base + PORT_PRD_CTL);
-	tmp &= ~(PRD_CTL_DMAEN | PRD_CTL_WR | PRD_CTL_START);
-	pp->dfl_prdctl = tmp;
-
 	/* Alloc resources */
 	rc = ata_port_start(ap);
-	if (rc) {
-		kfree(pp);
+	if (rc)
 		return rc;
-	}
+
+	pp->pkt = dmam_alloc_coherent(dev, sizeof(struct inic_pkt),
+				      &pp->pkt_dma, GFP_KERNEL);
+	if (!pp->pkt)
+		return -ENOMEM;
+
+	pp->cpb_tbl = dmam_alloc_coherent(dev, IDMA_CPB_TBL_SIZE,
+					  &pp->cpb_tbl_dma, GFP_KERNEL);
+	if (!pp->cpb_tbl)
+		return -ENOMEM;
 
 	init_port(ap);
 
@@ -517,21 +721,18 @@ static int inic_port_start(struct ata_port *ap)
 }
 
 static struct ata_port_operations inic_port_ops = {
-	.inherits		= &ata_sff_port_ops,
+	.inherits		= &sata_port_ops,
 
-	.bmdma_setup		= inic_bmdma_setup,
-	.bmdma_start		= inic_bmdma_start,
-	.bmdma_stop		= inic_bmdma_stop,
-	.bmdma_status		= inic_bmdma_status,
+	.check_atapi_dma	= inic_check_atapi_dma,
+	.qc_prep		= inic_qc_prep,
 	.qc_issue		= inic_qc_issue,
+	.qc_fill_rtf		= inic_qc_fill_rtf,
 
 	.freeze			= inic_freeze,
 	.thaw			= inic_thaw,
-	.softreset		= ATA_OP_NULL,	/* softreset is broken */
 	.hardreset		= inic_hardreset,
 	.error_handler		= inic_error_handler,
 	.post_internal_cmd	= inic_post_internal_cmd,
-	.dev_config		= inic_dev_config,
 
 	.scr_read		= inic_scr_read,
 	.scr_write		= inic_scr_write,
@@ -541,12 +742,6 @@ static struct ata_port_operations inic_port_ops = {
 };
 
 static struct ata_port_info inic_port_info = {
-	/* For some reason, ATAPI_PROT_PIO is broken on this
-	 * controller, and no, PIO_POLLING does't fix it.  It somehow
-	 * manages to report the wrong ireason and ignoring ireason
-	 * results in machine lock up.  Tell libata to always prefer
-	 * DMA.
-	 */
 	.flags			= ATA_FLAG_SATA | ATA_FLAG_PIO_DMA,
 	.pio_mask		= 0x1f,	/* pio0-4 */
 	.mwdma_mask		= 0x07, /* mwdma0-2 */
@@ -599,7 +794,6 @@ static int inic_pci_device_resume(struct pci_dev *pdev)
 {
 	struct ata_host *host = dev_get_drvdata(&pdev->dev);
 	struct inic_host_priv *hpriv = host->private_data;
-	void __iomem *mmio_base = host->iomap[MMIO_BAR];
 	int rc;
 
 	rc = ata_pci_device_do_resume(pdev);
@@ -607,7 +801,7 @@ static int inic_pci_device_resume(struct pci_dev *pdev)
 		return rc;
 
 	if (pdev->dev.power.power_state.event == PM_EVENT_SUSPEND) {
-		rc = init_controller(mmio_base, hpriv->cached_hctl);
+		rc = init_controller(hpriv->mmio_base, hpriv->cached_hctl);
 		if (rc)
 			return rc;
 	}
@@ -625,6 +819,7 @@ static int inic_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	struct ata_host *host;
 	struct inic_host_priv *hpriv;
 	void __iomem * const *iomap;
+	int mmio_bar;
 	int i, rc;
 
 	if (!printed_version++)
@@ -638,38 +833,31 @@ static int inic_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 
 	host->private_data = hpriv;
 
-	/* acquire resources and fill host */
+	/* Acquire resources and fill host.  Note that PCI and cardbus
+	 * use different BARs.
+	 */
 	rc = pcim_enable_device(pdev);
 	if (rc)
 		return rc;
 
-	rc = pcim_iomap_regions(pdev, 0x3f, DRV_NAME);
+	if (pci_resource_flags(pdev, MMIO_BAR_PCI) & IORESOURCE_MEM)
+		mmio_bar = MMIO_BAR_PCI;
+	else
+		mmio_bar = MMIO_BAR_CARDBUS;
+
+	rc = pcim_iomap_regions(pdev, 1 << mmio_bar, DRV_NAME);
 	if (rc)
 		return rc;
 	host->iomap = iomap = pcim_iomap_table(pdev);
+	hpriv->mmio_base = iomap[mmio_bar];
+	hpriv->cached_hctl = readw(hpriv->mmio_base + HOST_CTL);
 
 	for (i = 0; i < NR_PORTS; i++) {
 		struct ata_port *ap = host->ports[i];
-		struct ata_ioports *port = &ap->ioaddr;
-		unsigned int offset = i * PORT_SIZE;
-
-		port->cmd_addr = iomap[2 * i];
-		port->altstatus_addr =
-		port->ctl_addr = (void __iomem *)
-			((unsigned long)iomap[2 * i + 1] | ATA_PCI_CTL_OFS);
-		port->scr_addr = iomap[MMIO_BAR] + offset + PORT_SCR;
-
-		ata_sff_std_ports(port);
-
-		ata_port_pbar_desc(ap, MMIO_BAR, -1, "mmio");
-		ata_port_pbar_desc(ap, MMIO_BAR, offset, "port");
-		ata_port_desc(ap, "cmd 0x%llx ctl 0x%llx",
-		  (unsigned long long)pci_resource_start(pdev, 2 * i),
-		  (unsigned long long)pci_resource_start(pdev, (2 * i + 1)) |
-				      ATA_PCI_CTL_OFS);
-	}
 
-	hpriv->cached_hctl = readw(iomap[MMIO_BAR] + HOST_CTL);
+		ata_port_pbar_desc(ap, mmio_bar, -1, "mmio");
+		ata_port_pbar_desc(ap, mmio_bar, i * PORT_SIZE, "port");
+	}
 
 	/* Set dma_mask.  This devices doesn't support 64bit addressing. */
 	rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
@@ -698,7 +886,7 @@ static int inic_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 		return rc;
 	}
 
-	rc = init_controller(iomap[MMIO_BAR], hpriv->cached_hctl);
+	rc = init_controller(hpriv->mmio_base, hpriv->cached_hctl);
 	if (rc) {
 		dev_printk(KERN_ERR, &pdev->dev,
 			   "failed to initialize controller\n");

include/linux/libata.h

@@ -1039,6 +1039,7 @@ extern void ata_eh_thaw_port(struct ata_port *ap);
 
 extern void ata_eh_qc_complete(struct ata_queued_cmd *qc);
 extern void ata_eh_qc_retry(struct ata_queued_cmd *qc);
+extern void ata_eh_analyze_ncq_error(struct ata_link *link);
 
 extern void ata_do_eh(struct ata_port *ap, ata_prereset_fn_t prereset,
 		      ata_reset_fn_t softreset, ata_reset_fn_t hardreset,
@@ -1381,6 +1382,21 @@ static inline struct ata_port *ata_shost_to_port(struct Scsi_Host *host)
 	return *(struct ata_port **)&host->hostdata[0];
 }
 
+static inline int ata_check_ready(u8 status)
+{
+	/* Some controllers report 0x77 or 0x7f during intermediate
+	 * not-ready stages.
+	 */
+	if (status == 0x77 || status == 0x7f)
+		return 0;
+
+	/* 0xff indicates either no device or device not ready */
+	if (status == 0xff)
+		return -ENODEV;
+
+	return !(status & ATA_BUSY);
+}
+
 
 /**************************************************************************
  * PMP - drivers/ata/libata-pmp.c