Merge commit 'kumar/kumar-next' into next

arch/powerpc/boot/dts/mpc8544ds.dts

@@ -313,7 +313,7 @@
 			  0x1000000 0x0 0x0 0xe1010000 0x0 0x10000>;
 		clock-frequency = <33333333>;
 		interrupt-parent = <&mpic>;
-		interrupts = <26 2>;
+		interrupts = <25 2>;
 		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 		interrupt-map = <
 			/* IDSEL 0x0 */
@@ -350,7 +350,7 @@
 			  0x1000000 0x0 0x0 0xe1020000 0x0 0x10000>;
 		clock-frequency = <33333333>;
 		interrupt-parent = <&mpic>;
-		interrupts = <25 2>;
+		interrupts = <26 2>;
 		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 		interrupt-map = <
 			/* IDSEL 0x0 */

arch/powerpc/boot/dts/mpc8572ds.dts

@@ -724,7 +724,7 @@
 			  0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x00010000>;
 		clock-frequency = <33333333>;
 		interrupt-parent = <&mpic>;
-		interrupts = <26 2>;
+		interrupts = <25 2>;
 		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 		interrupt-map = <
 			/* IDSEL 0x0 */
@@ -761,7 +761,7 @@
 			  0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x00010000>;
 		clock-frequency = <33333333>;
 		interrupt-parent = <&mpic>;
-		interrupts = <27 2>;
+		interrupts = <26 2>;
 		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 		interrupt-map = <
 			/* IDSEL 0x0 */

arch/powerpc/boot/dts/mpc8572ds_camp_core0.dts

@@ -457,7 +457,7 @@
 			  0x1000000 0x0 0x0 0xffc10000 0x0 0x10000>;
 		clock-frequency = <33333333>;
 		interrupt-parent = <&mpic>;
-		interrupts = <26 2>;
+		interrupts = <25 2>;
 		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 		interrupt-map = <
 			/* IDSEL 0x0 */

arch/powerpc/boot/dts/mpc8572ds_camp_core1.dts

@@ -208,7 +208,7 @@
 			  0x1000000 0x0 0x0 0xffc20000 0x0 0x10000>;
 		clock-frequency = <33333333>;
 		interrupt-parent = <&mpic>;
-		interrupts = <27 2>;
+		interrupts = <26 2>;
 		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 		interrupt-map = <
 			/* IDSEL 0x0 */

arch/powerpc/include/asm/qe.h

@@ -624,7 +624,7 @@ struct ucc_slow_pram {
 #define UCC_GETH_UCCE_RXF1      0x00000002
 #define UCC_GETH_UCCE_RXF0      0x00000001
 
-/* UPSMR, when used as a UART */
+/* UCC Protocol Specific Mode Register (UPSMR), when used for UART */
 #define UCC_UART_UPSMR_FLC		0x8000
 #define UCC_UART_UPSMR_SL		0x4000
 #define UCC_UART_UPSMR_CL_MASK		0x3000
@@ -652,6 +652,23 @@ struct ucc_slow_pram {
 #define UCC_UART_UPSMR_TPM_EVEN		0x0002
 #define UCC_UART_UPSMR_TPM_HIGH		0x0003
 
+/* UCC Protocol Specific Mode Register (UPSMR), when used for Ethernet */
+#define UCC_GETH_UPSMR_FTFE     0x80000000
+#define UCC_GETH_UPSMR_PTPE     0x40000000
+#define UCC_GETH_UPSMR_ECM      0x04000000
+#define UCC_GETH_UPSMR_HSE      0x02000000
+#define UCC_GETH_UPSMR_PRO      0x00400000
+#define UCC_GETH_UPSMR_CAP      0x00200000
+#define UCC_GETH_UPSMR_RSH      0x00100000
+#define UCC_GETH_UPSMR_RPM      0x00080000
+#define UCC_GETH_UPSMR_R10M     0x00040000
+#define UCC_GETH_UPSMR_RLPB     0x00020000
+#define UCC_GETH_UPSMR_TBIM     0x00010000
+#define UCC_GETH_UPSMR_RES1     0x00002000
+#define UCC_GETH_UPSMR_RMM      0x00001000
+#define UCC_GETH_UPSMR_CAM      0x00000400
+#define UCC_GETH_UPSMR_BRO      0x00000200
+
 /* UCC Transmit On Demand Register (UTODR) */
 #define UCC_SLOW_TOD	0x8000
 #define UCC_FAST_TOD	0x8000

arch/powerpc/kernel/asm-offsets.c

@@ -56,6 +56,10 @@
 #include "head_booke.h"
 #endif
 
+#if defined(CONFIG_FSL_BOOKE)
+#include "../mm/mmu_decl.h"
+#endif
+
 int main(void)
 {
 	DEFINE(THREAD, offsetof(struct task_struct, thread));
@@ -382,6 +386,9 @@ int main(void)
 	DEFINE(PGD_T_LOG2, PGD_T_LOG2);
 	DEFINE(PTE_T_LOG2, PTE_T_LOG2);
 #endif
+#ifdef CONFIG_FSL_BOOKE
+	DEFINE(TLBCAM_SIZE, sizeof(struct tlbcam));
+#endif
 
 #ifdef CONFIG_KVM_EXIT_TIMING
 	DEFINE(VCPU_TIMING_EXIT_TBU, offsetof(struct kvm_vcpu,

arch/powerpc/kernel/head_fsl_booke.S

@@ -389,10 +389,6 @@ skpinv:	addi	r6,r6,1				/* Increment */
 #endif
 #endif
 
-	mfspr	r3,SPRN_TLB1CFG
-	andi.	r3,r3,0xfff
-	lis	r4,num_tlbcam_entries@ha
-	stw	r3,num_tlbcam_entries@l(r4)
 /*
  * Decide what sort of machine this is and initialize the MMU.
  */
@@ -909,7 +905,7 @@ KernelSPE:
 _GLOBAL(loadcam_entry)
 	lis	r4,TLBCAM@ha
 	addi	r4,r4,TLBCAM@l
-	mulli	r5,r3,20
+	mulli	r5,r3,TLBCAM_SIZE
 	add	r3,r5,r4
 	lwz	r4,0(r3)
 	mtspr	SPRN_MAS0,r4

arch/powerpc/mm/fsl_booke_mmu.c

@@ -56,18 +56,11 @@
 
 extern void loadcam_entry(unsigned int index);
 unsigned int tlbcam_index;
-unsigned int num_tlbcam_entries;
 static unsigned long __cam0, __cam1, __cam2;
 
 #define NUM_TLBCAMS	(16)
 
-struct tlbcam {
-   	u32	MAS0;
-	u32	MAS1;
-	u32	MAS2;
-	u32	MAS3;
-	u32	MAS7;
-} TLBCAM[NUM_TLBCAMS];
+struct tlbcam TLBCAM[NUM_TLBCAMS];
 
 struct tlbcamrange {
    	unsigned long start;

arch/powerpc/mm/mmu_decl.h

@@ -75,6 +75,15 @@ extern void _tlbia(void);
 #endif /* CONFIG_PPC_MMU_NOHASH */
 
 #ifdef CONFIG_PPC32
+
+struct tlbcam {
+	u32	MAS0;
+	u32	MAS1;
+	u32	MAS2;
+	u32	MAS3;
+	u32	MAS7;
+};
+
 extern void mapin_ram(void);
 extern int map_page(unsigned long va, phys_addr_t pa, int flags);
 extern void setbat(int index, unsigned long virt, phys_addr_t phys,
@@ -90,8 +99,6 @@ extern unsigned int rtas_data, rtas_size;
 struct hash_pte;
 extern struct hash_pte *Hash, *Hash_end;
 extern unsigned long Hash_size, Hash_mask;
-
-extern unsigned int num_tlbcam_entries;
 #endif
 
 extern unsigned long ioremap_bot;

arch/powerpc/platforms/fsl_uli1575.c

@@ -249,6 +249,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5288, quirk_uli5288);
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5229, quirk_uli5229);
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, 0x5249, quirk_final_uli5249);
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, 0x1575, quirk_final_uli1575);
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_AL, 0x5229, quirk_uli5229);
 
 static void __devinit hpcd_quirk_uli1575(struct pci_dev *dev)
 {

arch/powerpc/sysdev/fsl_pci.c

@@ -28,63 +28,104 @@
 #include <sysdev/fsl_pci.h>
 
 #if defined(CONFIG_PPC_85xx) || defined(CONFIG_PPC_86xx)
+static int __init setup_one_atmu(struct ccsr_pci __iomem *pci,
+	unsigned int index, const struct resource *res,
+	resource_size_t offset)
+{
+	resource_size_t pci_addr = res->start - offset;
+	resource_size_t phys_addr = res->start;
+	resource_size_t size = res->end - res->start + 1;
+	u32 flags = 0x80044000; /* enable & mem R/W */
+	unsigned int i;
+
+	pr_debug("PCI MEM resource start 0x%016llx, size 0x%016llx.\n",
+		(u64)res->start, (u64)size);
+
+	if (res->flags & IORESOURCE_PREFETCH)
+		flags |= 0x10000000; /* enable relaxed ordering */
+
+	for (i = 0; size > 0; i++) {
+		unsigned int bits = min(__ilog2(size),
+					__ffs(pci_addr | phys_addr));
+
+		if (index + i >= 5)
+			return -1;
+
+		out_be32(&pci->pow[index + i].potar, pci_addr >> 12);
+		out_be32(&pci->pow[index + i].potear, (u64)pci_addr >> 44);
+		out_be32(&pci->pow[index + i].powbar, phys_addr >> 12);
+		out_be32(&pci->pow[index + i].powar, flags | (bits - 1));
+
+		pci_addr += (resource_size_t)1U << bits;
+		phys_addr += (resource_size_t)1U << bits;
+		size -= (resource_size_t)1U << bits;
+	}
+
+	return i;
+}
+
 /* atmu setup for fsl pci/pcie controller */
 static void __init setup_pci_atmu(struct pci_controller *hose,
 				  struct resource *rsrc)
 {
 	struct ccsr_pci __iomem *pci;
-	int i;
+	int i, j, n;
 
 	pr_debug("PCI memory map start 0x%016llx, size 0x%016llx\n",
 		    (u64)rsrc->start, (u64)rsrc->end - (u64)rsrc->start + 1);
 	pci = ioremap(rsrc->start, rsrc->end - rsrc->start + 1);
+	if (!pci) {
+	    dev_err(hose->parent, "Unable to map ATMU registers\n");
+	    return;
+	}
 
-	/* Disable all windows (except powar0 since its ignored) */
+	/* Disable all windows (except powar0 since it's ignored) */
 	for(i = 1; i < 5; i++)
 		out_be32(&pci->pow[i].powar, 0);
 	for(i = 0; i < 3; i++)
 		out_be32(&pci->piw[i].piwar, 0);
 
 	/* Setup outbound MEM window */
-	for(i = 0; i < 3; i++)
-		if (hose->mem_resources[i].flags & IORESOURCE_MEM){
-			resource_size_t pci_addr_start =
-				 hose->mem_resources[i].start -
-				 hose->pci_mem_offset;
-			pr_debug("PCI MEM resource start 0x%016llx, size 0x%016llx.\n",
-				(u64)hose->mem_resources[i].start,
-				(u64)hose->mem_resources[i].end
-				  - (u64)hose->mem_resources[i].start + 1);
-			out_be32(&pci->pow[i+1].potar, (pci_addr_start >> 12));
-			out_be32(&pci->pow[i+1].potear, 0);
-			out_be32(&pci->pow[i+1].powbar,
-				(hose->mem_resources[i].start >> 12));
-			/* Enable, Mem R/W */
-			out_be32(&pci->pow[i+1].powar, 0x80044000
-				| (__ilog2(hose->mem_resources[i].end
-				- hose->mem_resources[i].start + 1) - 1));
-		}
+	for(i = 0, j = 1; i < 3; i++) {
+		if (!(hose->mem_resources[i].flags & IORESOURCE_MEM))
+			continue;
+
+		n = setup_one_atmu(pci, j, &hose->mem_resources[i],
+				   hose->pci_mem_offset);
+
+		if (n < 0 || j >= 5) {
+			pr_err("Ran out of outbound PCI ATMUs for resource %d!\n", i);
+			hose->mem_resources[i].flags |= IORESOURCE_DISABLED;
+		} else
+			j += n;
+	}
 
 	/* Setup outbound IO window */
-	if (hose->io_resource.flags & IORESOURCE_IO){
-		pr_debug("PCI IO resource start 0x%016llx, size 0x%016llx, "
-			 "phy base 0x%016llx.\n",
-			(u64)hose->io_resource.start,
-			(u64)hose->io_resource.end - (u64)hose->io_resource.start + 1,
-			(u64)hose->io_base_phys);
-		out_be32(&pci->pow[i+1].potar, (hose->io_resource.start >> 12));
-		out_be32(&pci->pow[i+1].potear, 0);
-		out_be32(&pci->pow[i+1].powbar, (hose->io_base_phys >> 12));
-		/* Enable, IO R/W */
-		out_be32(&pci->pow[i+1].powar, 0x80088000
-			| (__ilog2(hose->io_resource.end
-			- hose->io_resource.start + 1) - 1));
+	if (hose->io_resource.flags & IORESOURCE_IO) {
+		if (j >= 5) {
+			pr_err("Ran out of outbound PCI ATMUs for IO resource\n");
+		} else {
+			pr_debug("PCI IO resource start 0x%016llx, size 0x%016llx, "
+				 "phy base 0x%016llx.\n",
+				(u64)hose->io_resource.start,
+				(u64)hose->io_resource.end - (u64)hose->io_resource.start + 1,
+				(u64)hose->io_base_phys);
+			out_be32(&pci->pow[j].potar, (hose->io_resource.start >> 12));
+			out_be32(&pci->pow[j].potear, 0);
+			out_be32(&pci->pow[j].powbar, (hose->io_base_phys >> 12));
+			/* Enable, IO R/W */
+			out_be32(&pci->pow[j].powar, 0x80088000
+				| (__ilog2(hose->io_resource.end
+				- hose->io_resource.start + 1) - 1));
+		}
 	}
 
 	/* Setup 2G inbound Memory Window @ 1 */
 	out_be32(&pci->piw[2].pitar, 0x00000000);
 	out_be32(&pci->piw[2].piwbar,0x00000000);
 	out_be32(&pci->piw[2].piwar, PIWAR_2G);
+
+	iounmap(pci);
 }
 
 static void __init setup_pci_cmd(struct pci_controller *hose)