Merge tag 'asoc-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into topic/asoc

A few more ASoC updates, the main one is the move of the audmux driver
from arch/arm into sound/soc.  There's also some general driver specific
tweaks and fixes.

Documentation/devicetree/bindings/sound/imx-audmux.txt

@@ -0,0 +1,13 @@
+Freescale Digital Audio Mux (AUDMUX) device
+
+Required properties:
+- compatible : "fsl,imx21-audmux" for AUDMUX version firstly used on i.MX21,
+  or "fsl,imx31-audmux" for the version firstly used on i.MX31.
+- reg : Should contain AUDMUX registers location and length
+
+Example:
+
+audmux@021d8000 {
+	compatible = "fsl,imx6q-audmux", "fsl,imx31-audmux";
+	reg = <0x021d8000 0x4000>;
+};

arch/arm/mach-imx/Kconfig

@@ -46,7 +46,6 @@ config SOC_IMX21
 	bool
 	select MACH_MX21
 	select CPU_ARM926T
-	select ARCH_MXC_AUDMUX_V1
 	select IMX_HAVE_DMA_V1
 	select IMX_HAVE_IOMUX_V1
 	select MXC_AVIC
@@ -55,7 +54,6 @@ config SOC_IMX25
 	bool
 	select ARCH_MX25
 	select CPU_ARM926T
-	select ARCH_MXC_AUDMUX_V2
 	select ARCH_MXC_IOMUX_V3
 	select MXC_AVIC
 
@@ -63,7 +61,6 @@ config SOC_IMX27
 	bool
 	select MACH_MX27
 	select CPU_ARM926T
-	select ARCH_MXC_AUDMUX_V1
 	select IMX_HAVE_DMA_V1
 	select IMX_HAVE_IOMUX_V1
 	select MXC_AVIC
@@ -72,7 +69,6 @@ config SOC_IMX31
 	bool
 	select CPU_V6
 	select IMX_HAVE_PLATFORM_MXC_RNGA
-	select ARCH_MXC_AUDMUX_V2
 	select MXC_AVIC
 	select SMP_ON_UP if SMP
 
@@ -80,7 +76,6 @@ config SOC_IMX35
 	bool
 	select CPU_V6
 	select ARCH_MXC_IOMUX_V3
-	select ARCH_MXC_AUDMUX_V2
 	select HAVE_EPIT
 	select MXC_AVIC
 	select SMP_ON_UP if SMP
@@ -89,7 +84,6 @@ config SOC_IMX5
 	select CPU_V7
 	select MXC_TZIC
 	select ARCH_MXC_IOMUX_V3
-	select ARCH_MXC_AUDMUX_V2
 	select ARCH_HAS_CPUFREQ
 	select ARCH_MX5
 	bool

arch/arm/mach-imx/eukrea_mbimx27-baseboard.c

@@ -32,7 +32,6 @@
 #include <mach/common.h>
 #include <mach/iomux-mx27.h>
 #include <mach/hardware.h>
-#include <mach/audmux.h>
 
 #include "devices-imx27.h"
 
@@ -306,25 +305,6 @@ void __init eukrea_mbimx27_baseboard_init(void)
 	mxc_gpio_setup_multiple_pins(eukrea_mbimx27_pins,
 		ARRAY_SIZE(eukrea_mbimx27_pins), "MBIMX27");
 
-#if defined(CONFIG_SND_SOC_EUKREA_TLV320) \
-	|| defined(CONFIG_SND_SOC_EUKREA_TLV320_MODULE)
-	/* SSI unit master I2S codec connected to SSI_PINS_4*/
-	mxc_audmux_v1_configure_port(MX27_AUDMUX_HPCR1_SSI0,
-			MXC_AUDMUX_V1_PCR_SYN |
-			MXC_AUDMUX_V1_PCR_TFSDIR |
-			MXC_AUDMUX_V1_PCR_TCLKDIR |
-			MXC_AUDMUX_V1_PCR_RFSDIR |
-			MXC_AUDMUX_V1_PCR_RCLKDIR |
-			MXC_AUDMUX_V1_PCR_TFCSEL(MX27_AUDMUX_HPCR3_SSI_PINS_4) |
-			MXC_AUDMUX_V1_PCR_RFCSEL(MX27_AUDMUX_HPCR3_SSI_PINS_4) |
-			MXC_AUDMUX_V1_PCR_RXDSEL(MX27_AUDMUX_HPCR3_SSI_PINS_4)
-	);
-	mxc_audmux_v1_configure_port(MX27_AUDMUX_HPCR3_SSI_PINS_4,
-			MXC_AUDMUX_V1_PCR_SYN |
-			MXC_AUDMUX_V1_PCR_RXDSEL(MX27_AUDMUX_HPCR1_SSI0)
-	);
-#endif
-
 	imx27_add_imx_uart1(&uart_pdata);
 	imx27_add_imx_uart2(&uart_pdata);
 #if !defined(MACH_EUKREA_CPUIMX27_USEUART4)

arch/arm/mach-imx/eukrea_mbimxsd-baseboard.c

@@ -37,7 +37,6 @@
 #include <mach/hardware.h>
 #include <mach/common.h>
 #include <mach/iomux-mx51.h>
-#include <mach/audmux.h>
 
 #include "devices-imx51.h"
 

arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c

@@ -31,7 +31,6 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <mach/mx25.h>
-#include <mach/audmux.h>
 
 #include "devices-imx25.h"
 
@@ -241,22 +240,6 @@ void __init eukrea_mbimxsd25_baseboard_init(void)
 			ARRAY_SIZE(eukrea_mbimxsd_pads)))
 		printk(KERN_ERR "error setting mbimxsd pads !\n");
 
-#if defined(CONFIG_SND_SOC_EUKREA_TLV320)
-	/* SSI unit master I2S codec connected to SSI_AUD5*/
-	mxc_audmux_v2_configure_port(0,
-			MXC_AUDMUX_V2_PTCR_SYN |
-			MXC_AUDMUX_V2_PTCR_TFSDIR |
-			MXC_AUDMUX_V2_PTCR_TFSEL(4) |
-			MXC_AUDMUX_V2_PTCR_TCLKDIR |
-			MXC_AUDMUX_V2_PTCR_TCSEL(4),
-			MXC_AUDMUX_V2_PDCR_RXDSEL(4)
-	);
-	mxc_audmux_v2_configure_port(4,
-			MXC_AUDMUX_V2_PTCR_SYN,
-			MXC_AUDMUX_V2_PDCR_RXDSEL(0)
-	);
-#endif
-
 	imx25_add_imx_uart1(&uart_pdata);
 	imx25_add_imx_fb(&eukrea_mximxsd_fb_pdata);
 	imx25_add_imx_ssi(0, &eukrea_mbimxsd_ssi_pdata);

arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c

@@ -38,7 +38,6 @@
 #include <mach/hardware.h>
 #include <mach/common.h>
 #include <mach/iomux-mx35.h>
-#include <mach/audmux.h>
 
 #include "devices-imx35.h"
 
@@ -252,22 +251,6 @@ void __init eukrea_mbimxsd35_baseboard_init(void)
 			ARRAY_SIZE(eukrea_mbimxsd_pads)))
 		printk(KERN_ERR "error setting mbimxsd pads !\n");
 
-#if defined(CONFIG_SND_SOC_EUKREA_TLV320)
-	/* SSI unit master I2S codec connected to SSI_AUD4 */
-	mxc_audmux_v2_configure_port(0,
-			MXC_AUDMUX_V2_PTCR_SYN |
-			MXC_AUDMUX_V2_PTCR_TFSDIR |
-			MXC_AUDMUX_V2_PTCR_TFSEL(3) |
-			MXC_AUDMUX_V2_PTCR_TCLKDIR |
-			MXC_AUDMUX_V2_PTCR_TCSEL(3),
-			MXC_AUDMUX_V2_PDCR_RXDSEL(3)
-	);
-	mxc_audmux_v2_configure_port(3,
-			MXC_AUDMUX_V2_PTCR_SYN,
-			MXC_AUDMUX_V2_PDCR_RXDSEL(0)
-	);
-#endif
-
 	imx35_add_imx_uart1(&uart_pdata);
 	imx35_add_ipu_core(&mx3_ipu_data);
 	imx35_add_mx3_sdc_fb(&mx3fb_pdata);

arch/arm/mach-imx/mach-pca100.c

@@ -36,7 +36,6 @@
 #include <mach/hardware.h>
 #include <mach/iomux-mx27.h>
 #include <asm/mach/time.h>
-#include <mach/audmux.h>
 #include <mach/irqs.h>
 #include <mach/ulpi.h>
 
@@ -359,18 +358,6 @@ static void __init pca100_init(void)
 
 	imx27_soc_init();
 
-	/* SSI unit */
-	mxc_audmux_v1_configure_port(MX27_AUDMUX_HPCR1_SSI0,
-				  MXC_AUDMUX_V1_PCR_SYN | /* 4wire mode */
-				  MXC_AUDMUX_V1_PCR_TFCSEL(3) |
-				  MXC_AUDMUX_V1_PCR_TCLKDIR | /* clock is output */
-				  MXC_AUDMUX_V1_PCR_RXDSEL(3));
-	mxc_audmux_v1_configure_port(3,
-				  MXC_AUDMUX_V1_PCR_SYN | /* 4wire mode */
-				  MXC_AUDMUX_V1_PCR_TFCSEL(0) |
-				  MXC_AUDMUX_V1_PCR_TFSDIR |
-				  MXC_AUDMUX_V1_PCR_RXDSEL(0));
-
 	ret = mxc_gpio_setup_multiple_pins(pca100_pins,
 			ARRAY_SIZE(pca100_pins), "PCA100");
 	if (ret)

arch/arm/mach-imx/mach-pcm043.c

@@ -37,7 +37,6 @@
 #include <mach/common.h>
 #include <mach/iomux-mx35.h>
 #include <mach/ulpi.h>
-#include <mach/audmux.h>
 
 #include "devices-imx35.h"
 
@@ -362,18 +361,6 @@ static void __init pcm043_init(void)
 
 	mxc_iomux_v3_setup_multiple_pads(pcm043_pads, ARRAY_SIZE(pcm043_pads));
 
-	mxc_audmux_v2_configure_port(3,
-			MXC_AUDMUX_V2_PTCR_SYN | /* 4wire mode */
-			MXC_AUDMUX_V2_PTCR_TFSEL(0) |
-			MXC_AUDMUX_V2_PTCR_TFSDIR,
-			MXC_AUDMUX_V2_PDCR_RXDSEL(0));
-
-	mxc_audmux_v2_configure_port(0,
-			MXC_AUDMUX_V2_PTCR_SYN | /* 4wire mode */
-			MXC_AUDMUX_V2_PTCR_TCSEL(3) |
-			MXC_AUDMUX_V2_PTCR_TCLKDIR, /* clock is output */
-			MXC_AUDMUX_V2_PDCR_RXDSEL(3));
-
 	imx35_add_fec(NULL);
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 	imx35_add_imx2_wdt(NULL);

arch/arm/mach-imx/mm-imx21.c

@@ -75,6 +75,10 @@ void __init mx21_init_irq(void)
 	mxc_init_irq(MX21_IO_ADDRESS(MX21_AVIC_BASE_ADDR));
 }
 
+static const struct resource imx21_audmux_res[] __initconst = {
+	DEFINE_RES_MEM(MX21_AUDMUX_BASE_ADDR, SZ_4K),
+};
+
 void __init imx21_soc_init(void)
 {
 	mxc_register_gpio("imx21-gpio", 0, MX21_GPIO1_BASE_ADDR, SZ_256, MX21_INT_GPIO, 0);
@@ -85,4 +89,6 @@ void __init imx21_soc_init(void)
 	mxc_register_gpio("imx21-gpio", 5, MX21_GPIO6_BASE_ADDR, SZ_256, MX21_INT_GPIO, 0);
 
 	imx_add_imx_dma();
+	platform_device_register_simple("imx21-audmux", 0, imx21_audmux_res,
+					ARRAY_SIZE(imx21_audmux_res));
 }

arch/arm/mach-imx/mm-imx25.c

@@ -83,6 +83,10 @@ static struct sdma_platform_data imx25_sdma_pdata __initdata = {
 	.script_addrs = &imx25_sdma_script,
 };
 
+static const struct resource imx25_audmux_res[] __initconst = {
+	DEFINE_RES_MEM(MX25_AUDMUX_BASE_ADDR, SZ_16K),
+};
+
 void __init imx25_soc_init(void)
 {
 	/* i.mx25 has the i.mx31 type gpio */
@@ -93,4 +97,7 @@ void __init imx25_soc_init(void)
 
 	/* i.mx25 has the i.mx35 type sdma */
 	imx_add_imx_sdma("imx35-sdma", MX25_SDMA_BASE_ADDR, MX25_INT_SDMA, &imx25_sdma_pdata);
+	/* i.mx25 has the i.mx31 type audmux */
+	platform_device_register_simple("imx31-audmux", 0, imx25_audmux_res,
+					ARRAY_SIZE(imx25_audmux_res));
 }

arch/arm/mach-imx/mm-imx27.c

@@ -75,6 +75,10 @@ void __init mx27_init_irq(void)
 	mxc_init_irq(MX27_IO_ADDRESS(MX27_AVIC_BASE_ADDR));
 }
 
+static const struct resource imx27_audmux_res[] __initconst = {
+	DEFINE_RES_MEM(MX27_AUDMUX_BASE_ADDR, SZ_4K),
+};
+
 void __init imx27_soc_init(void)
 {
 	/* i.mx27 has the i.mx21 type gpio */
@@ -86,4 +90,7 @@ void __init imx27_soc_init(void)
 	mxc_register_gpio("imx21-gpio", 5, MX27_GPIO6_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0);
 
 	imx_add_imx_dma();
+	/* imx27 has the imx21 type audmux */
+	platform_device_register_simple("imx21-audmux", 0, imx27_audmux_res,
+					ARRAY_SIZE(imx27_audmux_res));
 }

arch/arm/mach-imx/mm-imx3.c

@@ -158,6 +158,10 @@ static struct sdma_platform_data imx31_sdma_pdata __initdata = {
 	.script_addrs = &imx31_to2_sdma_script,
 };
 
+static const struct resource imx31_audmux_res[] __initconst = {
+	DEFINE_RES_MEM(MX31_AUDMUX_BASE_ADDR, SZ_16K),
+};
+
 void __init imx31_soc_init(void)
 {
 	int to_version = mx31_revision() >> 4;
@@ -175,6 +179,8 @@ void __init imx31_soc_init(void)
 	}
 
 	imx_add_imx_sdma("imx31-sdma", MX31_SDMA_BASE_ADDR, MX31_INT_SDMA, &imx31_sdma_pdata);
+	platform_device_register_simple("imx31-audmux", 0, imx31_audmux_res,
+					ARRAY_SIZE(imx31_audmux_res));
 }
 #endif /* ifdef CONFIG_SOC_IMX31 */
 
@@ -241,6 +247,10 @@ static struct sdma_platform_data imx35_sdma_pdata __initdata = {
 	.script_addrs = &imx35_to2_sdma_script,
 };
 
+static const struct resource imx35_audmux_res[] __initconst = {
+	DEFINE_RES_MEM(MX35_AUDMUX_BASE_ADDR, SZ_16K),
+};
+
 void __init imx35_soc_init(void)
 {
 	int to_version = mx35_revision() >> 4;
@@ -259,5 +269,8 @@ void __init imx35_soc_init(void)
 	}
 
 	imx_add_imx_sdma("imx35-sdma", MX35_SDMA_BASE_ADDR, MX35_INT_SDMA, &imx35_sdma_pdata);
+	/* i.mx35 has the i.mx31 type audmux */
+	platform_device_register_simple("imx31-audmux", 0, imx35_audmux_res,
+					ARRAY_SIZE(imx35_audmux_res));
 }
 #endif /* ifdef CONFIG_SOC_IMX35 */

arch/arm/mach-imx/mm-imx5.c

@@ -170,6 +170,18 @@ static struct sdma_platform_data imx53_sdma_pdata __initdata = {
 	.script_addrs = &imx53_sdma_script,
 };
 
+static const struct resource imx50_audmux_res[] __initconst = {
+	DEFINE_RES_MEM(MX50_AUDMUX_BASE_ADDR, SZ_16K),
+};
+
+static const struct resource imx51_audmux_res[] __initconst = {
+	DEFINE_RES_MEM(MX51_AUDMUX_BASE_ADDR, SZ_16K),
+};
+
+static const struct resource imx53_audmux_res[] __initconst = {
+	DEFINE_RES_MEM(MX53_AUDMUX_BASE_ADDR, SZ_16K),
+};
+
 void __init imx50_soc_init(void)
 {
 	/* i.mx50 has the i.mx31 type gpio */
@@ -179,6 +191,10 @@ void __init imx50_soc_init(void)
 	mxc_register_gpio("imx31-gpio", 3, MX50_GPIO4_BASE_ADDR, SZ_16K, MX50_INT_GPIO4_LOW, MX50_INT_GPIO4_HIGH);
 	mxc_register_gpio("imx31-gpio", 4, MX50_GPIO5_BASE_ADDR, SZ_16K, MX50_INT_GPIO5_LOW, MX50_INT_GPIO5_HIGH);
 	mxc_register_gpio("imx31-gpio", 5, MX50_GPIO6_BASE_ADDR, SZ_16K, MX50_INT_GPIO6_LOW, MX50_INT_GPIO6_HIGH);
+
+	/* i.mx50 has the i.mx31 type audmux */
+	platform_device_register_simple("imx31-audmux", 0, imx50_audmux_res,
+					ARRAY_SIZE(imx50_audmux_res));
 }
 
 void __init imx51_soc_init(void)
@@ -191,6 +207,9 @@ void __init imx51_soc_init(void)
 
 	/* i.mx51 has the i.mx35 type sdma */
 	imx_add_imx_sdma("imx35-sdma", MX51_SDMA_BASE_ADDR, MX51_INT_SDMA, &imx51_sdma_pdata);
+	/* i.mx51 has the i.mx31 type audmux */
+	platform_device_register_simple("imx31-audmux", 0, imx51_audmux_res,
+					ARRAY_SIZE(imx51_audmux_res));
 }
 
 void __init imx53_soc_init(void)
@@ -206,4 +225,7 @@ void __init imx53_soc_init(void)
 
 	/* i.mx53 has the i.mx35 type sdma */
 	imx_add_imx_sdma("imx35-sdma", MX53_SDMA_BASE_ADDR, MX53_INT_SDMA, &imx53_sdma_pdata);
+	/* i.mx53 has the i.mx31 type audmux */
+	platform_device_register_simple("imx31-audmux", 0, imx53_audmux_res,
+					ARRAY_SIZE(imx53_audmux_res));
 }

arch/arm/plat-mxc/Kconfig

@@ -88,12 +88,6 @@ config IMX_HAVE_IOMUX_V1
 config ARCH_MXC_IOMUX_V3
 	bool
 
-config ARCH_MXC_AUDMUX_V1
-	bool
-
-config ARCH_MXC_AUDMUX_V2
-	bool
-
 config IRAM_ALLOC
 	bool
 	select GENERIC_ALLOCATOR

arch/arm/plat-mxc/Makefile

@@ -14,8 +14,6 @@ obj-$(CONFIG_IRAM_ALLOC) += iram_alloc.o
 obj-$(CONFIG_MXC_PWM)  += pwm.o
 obj-$(CONFIG_MXC_ULPI) += ulpi.o
 obj-$(CONFIG_MXC_USE_EPIT) += epit.o
-obj-$(CONFIG_ARCH_MXC_AUDMUX_V1) += audmux-v1.o
-obj-$(CONFIG_ARCH_MXC_AUDMUX_V2) += audmux-v2.o
 obj-$(CONFIG_MXC_DEBUG_BOARD) += 3ds_debugboard.o
 obj-$(CONFIG_CPU_FREQ_IMX)    += cpufreq.o
 ifdef CONFIG_SND_IMX_SOC

arch/arm/plat-mxc/audmux-v1.c

@@ -1,64 +0,0 @@
-/*
- * Copyright 2009 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de>
- *
- * Initial development of this code was funded by
- * Phytec Messtechnik GmbH, http://www.phytec.de
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/module.h>
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/clk.h>
-#include <mach/audmux.h>
-#include <mach/hardware.h>
-
-static void __iomem *audmux_base;
-
-static unsigned char port_mapping[] = {
-	0x0, 0x4, 0x8, 0x10, 0x14, 0x1c,
-};
-
-int mxc_audmux_v1_configure_port(unsigned int port, unsigned int pcr)
-{
-	if (!audmux_base) {
-		printk("%s: not configured\n", __func__);
-		return -ENOSYS;
-	}
-
-	if (port >= ARRAY_SIZE(port_mapping))
-		return -EINVAL;
-
-	writel(pcr, audmux_base + port_mapping[port]);
-
-	return 0;
-}
-EXPORT_SYMBOL_GPL(mxc_audmux_v1_configure_port);
-
-static int mxc_audmux_v1_init(void)
-{
-#ifdef CONFIG_MACH_MX21
-	if (cpu_is_mx21())
-		audmux_base = MX21_IO_ADDRESS(MX21_AUDMUX_BASE_ADDR);
-	else
-#endif
-#ifdef CONFIG_MACH_MX27
-	if (cpu_is_mx27())
-		audmux_base = MX27_IO_ADDRESS(MX27_AUDMUX_BASE_ADDR);
-	else
-#endif
-		(void)0;
-	
-	return 0;
-}
-
-postcore_initcall(mxc_audmux_v1_init);

arch/arm/plat-mxc/include/mach/audmux.h

@@ -1,60 +0,0 @@
-#ifndef __MACH_AUDMUX_H
-#define __MACH_AUDMUX_H
-
-#define MX27_AUDMUX_HPCR1_SSI0		0
-#define MX27_AUDMUX_HPCR2_SSI1		1
-#define MX27_AUDMUX_HPCR3_SSI_PINS_4	2
-#define MX27_AUDMUX_PPCR1_SSI_PINS_1	3
-#define MX27_AUDMUX_PPCR2_SSI_PINS_2	4
-#define MX27_AUDMUX_PPCR3_SSI_PINS_3	5
-
-#define MX31_AUDMUX_PORT1_SSI0		0
-#define MX31_AUDMUX_PORT2_SSI1		1
-#define MX31_AUDMUX_PORT3_SSI_PINS_3	2
-#define MX31_AUDMUX_PORT4_SSI_PINS_4	3
-#define MX31_AUDMUX_PORT5_SSI_PINS_5	4
-#define MX31_AUDMUX_PORT6_SSI_PINS_6	5
-
-#define MX51_AUDMUX_PORT1_SSI0		0
-#define MX51_AUDMUX_PORT2_SSI1		1
-#define MX51_AUDMUX_PORT3		2
-#define MX51_AUDMUX_PORT4		3
-#define MX51_AUDMUX_PORT5		4
-#define MX51_AUDMUX_PORT6		5
-#define MX51_AUDMUX_PORT7		6
-
-/* Register definitions for the i.MX21/27 Digital Audio Multiplexer */
-#define MXC_AUDMUX_V1_PCR_INMMASK(x)	((x) & 0xff)
-#define MXC_AUDMUX_V1_PCR_INMEN		(1 << 8)
-#define MXC_AUDMUX_V1_PCR_TXRXEN	(1 << 10)
-#define MXC_AUDMUX_V1_PCR_SYN		(1 << 12)
-#define MXC_AUDMUX_V1_PCR_RXDSEL(x)	(((x) & 0x7) << 13)
-#define MXC_AUDMUX_V1_PCR_RFCSEL(x)	(((x) & 0xf) << 20)
-#define MXC_AUDMUX_V1_PCR_RCLKDIR	(1 << 24)
-#define MXC_AUDMUX_V1_PCR_RFSDIR	(1 << 25)
-#define MXC_AUDMUX_V1_PCR_TFCSEL(x)	(((x) & 0xf) << 26)
-#define MXC_AUDMUX_V1_PCR_TCLKDIR	(1 << 30)
-#define MXC_AUDMUX_V1_PCR_TFSDIR	(1 << 31)
-
-/* Register definitions for the i.MX25/31/35/51 Digital Audio Multiplexer */
-#define MXC_AUDMUX_V2_PTCR_TFSDIR	(1 << 31)
-#define MXC_AUDMUX_V2_PTCR_TFSEL(x)	(((x) & 0xf) << 27)
-#define MXC_AUDMUX_V2_PTCR_TCLKDIR	(1 << 26)
-#define MXC_AUDMUX_V2_PTCR_TCSEL(x)	(((x) & 0xf) << 22)
-#define MXC_AUDMUX_V2_PTCR_RFSDIR	(1 << 21)
-#define MXC_AUDMUX_V2_PTCR_RFSEL(x)	(((x) & 0xf) << 17)
-#define MXC_AUDMUX_V2_PTCR_RCLKDIR	(1 << 16)
-#define MXC_AUDMUX_V2_PTCR_RCSEL(x)	(((x) & 0xf) << 12)
-#define MXC_AUDMUX_V2_PTCR_SYN		(1 << 11)
-
-#define MXC_AUDMUX_V2_PDCR_RXDSEL(x)	(((x) & 0x7) << 13)
-#define MXC_AUDMUX_V2_PDCR_TXRXEN	(1 << 12)
-#define MXC_AUDMUX_V2_PDCR_MODE(x)	(((x) & 0x3) << 8)
-#define MXC_AUDMUX_V2_PDCR_INMMASK(x)	((x) & 0xff)
-
-int mxc_audmux_v1_configure_port(unsigned int port, unsigned int pcr);
-
-int mxc_audmux_v2_configure_port(unsigned int port, unsigned int ptcr,
-		unsigned int pdcr);
-
-#endif /* __MACH_AUDMUX_H */

sound/soc/codecs/wm8804.c

@@ -755,6 +755,12 @@ static __devinit int wm8804_i2c_probe(struct i2c_client *i2c,
 	if (!wm8804)
 		return -ENOMEM;
 
+	wm8804->regmap = regmap_init_i2c(i2c, &wm8804_regmap_config);
+	if (IS_ERR(wm8804->regmap)) {
+		ret = PTR_ERR(wm8804->regmap);
+		return ret;
+	}
+
 	i2c_set_clientdata(i2c, wm8804);
 
 	ret = snd_soc_register_codec(&i2c->dev,

sound/soc/codecs/wm8962.c

@@ -116,11 +116,11 @@ static struct reg_default wm8962_reg[] = {
 	{ 1, 0x049F },   /* R1     - Right Input volume */
 	{ 2, 0x0000 },   /* R2     - HPOUTL volume */
 	{ 3, 0x0000 },   /* R3     - HPOUTR volume */
-	{ 4, 0x0020 },   /* R4     - Clocking1 */
+
 	{ 5, 0x0018 },   /* R5     - ADC & DAC Control 1 */
 	{ 6, 0x2008 },   /* R6     - ADC & DAC Control 2 */
 	{ 7, 0x000A },   /* R7     - Audio Interface 0 */
-	{ 8, 0x01E4 },   /* R8     - Clocking2 */
+
 	{ 9, 0x0300 },   /* R9     - Audio Interface 1 */
 	{ 10, 0x00C0 },  /* R10    - Left DAC volume */
 	{ 11, 0x00C0 },  /* R11    - Right DAC volume */
@@ -129,7 +129,7 @@ static struct reg_default wm8962_reg[] = {
 	{ 15, 0x6243 },   /* R15    - Software Reset */
 
 	{ 17, 0x007B },   /* R17    - ALC1 */
-	{ 18, 0x0000 },   /* R18    - ALC2 */
+
 	{ 19, 0x1C32 },   /* R19    - ALC3 */
 	{ 20, 0x3200 },   /* R20    - Noise Gate */
 	{ 21, 0x00C0 },   /* R21    - Left ADC volume */
@@ -153,10 +153,6 @@ static struct reg_default wm8962_reg[] = {
 	{ 40, 0x0000 },   /* R40    - SPKOUTL volume */
 	{ 41, 0x0000 },   /* R41    - SPKOUTR volume */
 
-	{ 47, 0x0000 },   /* R47    - Thermal Shutdown Status */
-	{ 48, 0x8027 },   /* R48    - Additional Control (4) */
-	{ 49, 0x0010 },   /* R49    - Class D Control 1 */
-
 	{ 51, 0x0003 },   /* R51    - Class D Control 2 */
 
 	{ 56, 0x0506 },   /* R56    - Clocking 4 */
@@ -168,8 +164,6 @@ static struct reg_default wm8962_reg[] = {
 
 	{ 64, 0x0810 },   /* R64    - DC Servo 4 */
 
-	{ 66, 0x0000 },   /* R66    - DC Servo 6 */
-
 	{ 68, 0x001B },   /* R68    - Analogue PGA Bias */
 	{ 69, 0x0000 },   /* R69    - Analogue HP 0 */
 
@@ -302,9 +296,6 @@ static struct reg_default wm8962_reg[] = {
 	{ 516, 0x8100 },   /* R516   - GPIO 5 */
 	{ 517, 0x8100 },   /* R517   - GPIO 6 */
 
-	{ 560, 0x0000 },   /* R560   - Interrupt Status 1 */
-	{ 561, 0x0000 },   /* R561   - Interrupt Status 2 */
-
 	{ 568, 0x0030 },   /* R568   - Interrupt Status 1 Mask */
 	{ 569, 0xFFED },   /* R569   - Interrupt Status 2 Mask */
 
@@ -316,8 +307,6 @@ static struct reg_default wm8962_reg[] = {
 
 	{ 768, 0x1C00 },   /* R768   - DSP2 Power Management */
 
-	{ 1037, 0x0000 },   /* R1037  - DSP2_ExecControl */
-
 	{ 8192, 0x0000 },   /* R8192  - DSP2 Instruction RAM 0 */
 
 	{ 9216, 0x0030 },   /* R9216  - DSP2 Address RAM 2 */
@@ -3673,7 +3662,6 @@ static __devinit int wm8962_i2c_probe(struct i2c_client *i2c,
 				ret);
 	}
 
-	pm_runtime_set_active(&i2c->dev);
 	pm_runtime_enable(&i2c->dev);
 	pm_request_idle(&i2c->dev);
 

sound/soc/codecs/wm8994.c

@@ -685,8 +685,6 @@ SOC_SINGLE_TLV("MIXINL IN1RP Boost Volume", WM8994_INPUT_MIXER_1, 8, 1, 0,
 static void wm1811_jackdet_set_mode(struct snd_soc_codec *codec, u16 mode)
 {
 	struct wm8994_priv *wm8994 = snd_soc_codec_get_drvdata(codec);
-	u16 old = snd_soc_read(codec, WM8994_ANTIPOP_2)
-		& WM1811_JACKDET_MODE_MASK;
 
 	if (!wm8994->jackdet || !wm8994->jack_cb)
 		return;
@@ -694,28 +692,17 @@ static void wm1811_jackdet_set_mode(struct snd_soc_codec *codec, u16 mode)
 	if (wm8994->active_refcount)
 		mode = WM1811_JACKDET_MODE_AUDIO;
 
-	if (mode == old)
+	if (mode == wm8994->jackdet_mode)
 		return;
 
-	snd_soc_update_bits(codec, WM8994_ANTIPOP_2,
-			    WM1811_JACKDET_MODE_MASK, mode);
-
-	switch (mode) {
-	case WM1811_JACKDET_MODE_MIC:
-	case WM1811_JACKDET_MODE_AUDIO:
-		switch (old) {
-		case WM1811_JACKDET_MODE_MIC:
-		case WM1811_JACKDET_MODE_AUDIO:
-			break;
-		default:
-			msleep(2);
-			break;
-		}
+	wm8994->jackdet_mode = mode;
 
-	default:
-		break;
-	}
+	/* Always use audio mode to detect while the system is active */
+	if (mode != WM1811_JACKDET_MODE_NONE)
+		mode = WM1811_JACKDET_MODE_AUDIO;
 
+	snd_soc_update_bits(codec, WM8994_ANTIPOP_2,
+			    WM1811_JACKDET_MODE_MASK, mode);
 }
 
 static void active_reference(struct snd_soc_codec *codec)
@@ -2749,7 +2736,7 @@ static struct snd_soc_dai_driver wm8994_dai[] = {
 };
 
 #ifdef CONFIG_PM
-static int wm8994_suspend(struct snd_soc_codec *codec)
+static int wm8994_codec_suspend(struct snd_soc_codec *codec)
 {
 	struct wm8994_priv *wm8994 = snd_soc_codec_get_drvdata(codec);
 	struct wm8994 *control = wm8994->wm8994;
@@ -2783,7 +2770,7 @@ static int wm8994_suspend(struct snd_soc_codec *codec)
 	return 0;
 }
 
-static int wm8994_resume(struct snd_soc_codec *codec)
+static int wm8994_codec_resume(struct snd_soc_codec *codec)
 {
 	struct wm8994_priv *wm8994 = snd_soc_codec_get_drvdata(codec);
 	struct wm8994 *control = wm8994->wm8994;
@@ -2842,8 +2829,8 @@ static int wm8994_resume(struct snd_soc_codec *codec)
 	return 0;
 }
 #else
-#define wm8994_suspend NULL
-#define wm8994_resume NULL
+#define wm8994_codec_suspend NULL
+#define wm8994_codec_resume NULL
 #endif
 
 static void wm8994_handle_retune_mobile_pdata(struct wm8994_priv *wm8994)
@@ -3955,8 +3942,8 @@ static int  wm8994_codec_remove(struct snd_soc_codec *codec)
 static struct snd_soc_codec_driver soc_codec_dev_wm8994 = {
 	.probe =	wm8994_codec_probe,
 	.remove =	wm8994_codec_remove,
-	.suspend =	wm8994_suspend,
-	.resume =	wm8994_resume,
+	.suspend =	wm8994_codec_suspend,
+	.resume =	wm8994_codec_resume,
 	.set_bias_level = wm8994_set_bias_level,
 };
 
@@ -3983,11 +3970,43 @@ static int __devexit wm8994_remove(struct platform_device *pdev)
 	return 0;
 }
 
+#ifdef CONFIG_PM_SLEEP
+static int wm8994_suspend(struct device *dev)
+{
+	struct wm8994_priv *wm8994 = dev_get_drvdata(dev);
+
+	/* Drop down to power saving mode when system is suspended */
+	if (wm8994->jackdet && !wm8994->active_refcount)
+		regmap_update_bits(wm8994->wm8994->regmap, WM8994_ANTIPOP_2,
+				   WM1811_JACKDET_MODE_MASK,
+				   wm8994->jackdet_mode);
+
+	return 0;
+}
+
+static int wm8994_resume(struct device *dev)
+{
+	struct wm8994_priv *wm8994 = dev_get_drvdata(dev);
+
+	if (wm8994->jackdet && wm8994->jack_cb)
+		regmap_update_bits(wm8994->wm8994->regmap, WM8994_ANTIPOP_2,
+				   WM1811_JACKDET_MODE_MASK,
+				   WM1811_JACKDET_MODE_AUDIO);
+
+	return 0;
+}
+#endif
+
+static const struct dev_pm_ops wm8994_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(wm8994_suspend, wm8994_resume)
+};
+
 static struct platform_driver wm8994_codec_driver = {
 	.driver = {
-		   .name = "wm8994-codec",
-		   .owner = THIS_MODULE,
-		   },
+		.name = "wm8994-codec",
+		.owner = THIS_MODULE,
+		.pm = &wm8994_pm_ops,
+	},
 	.probe = wm8994_probe,
 	.remove = __devexit_p(wm8994_remove),
 };

sound/soc/codecs/wm8994.h

@@ -122,6 +122,7 @@ struct wm8994_priv {
 	bool jack_mic;
 	int btn_mask;
 	bool jackdet;
+	int jackdet_mode;
 
 	wm8958_micdet_cb jack_cb;
 	void *jack_cb_data;

sound/soc/imx/Kconfig

@@ -8,19 +8,32 @@ menuconfig SND_IMX_SOC
 
 if SND_IMX_SOC
 
+config SND_SOC_IMX_SSI
+	tristate
+
+config SND_SOC_IMX_PCM
+	tristate
+
 config SND_MXC_SOC_FIQ
-	select FIQ
 	tristate
+	select FIQ
+	select SND_SOC_IMX_PCM
 
 config SND_MXC_SOC_MX2
 	select SND_SOC_DMAENGINE_PCM
 	tristate
+	select SND_SOC_IMX_PCM
+
+config SND_SOC_IMX_AUDMUX
+	tristate
 
 config SND_MXC_SOC_WM1133_EV1
 	tristate "Audio on the the i.MX31ADS with WM1133-EV1 fitted"
 	depends on MACH_MX31ADS_WM1133_EV1 && EXPERIMENTAL
 	select SND_SOC_WM8350
 	select SND_MXC_SOC_FIQ
+	select SND_SOC_IMX_AUDMUX
+	select SND_SOC_IMX_SSI
 	help
 	  Enable support for audio on the i.MX31ADS with the WM1133-EV1
 	  PMIC board with WM8835x fitted.
@@ -30,6 +43,8 @@ config SND_SOC_MX27VIS_AIC32X4
 	depends on MACH_IMX27_VISSTRIM_M10 && I2C
 	select SND_SOC_TLV320AIC32X4
 	select SND_MXC_SOC_MX2
+	select SND_SOC_IMX_AUDMUX
+	select SND_SOC_IMX_SSI
 	help
 	  Say Y if you want to add support for SoC audio on Visstrim SM10
 	  board with TLV320AIC32X4 codec.
@@ -40,6 +55,8 @@ config SND_SOC_PHYCORE_AC97
 	select SND_SOC_AC97_BUS
 	select SND_SOC_WM9712
 	select SND_MXC_SOC_FIQ
+	select SND_SOC_IMX_AUDMUX
+	select SND_SOC_IMX_SSI
 	help
 	  Say Y if you want to add support for SoC audio on Phytec phyCORE
 	  and phyCARD boards in AC97 mode
@@ -53,6 +70,8 @@ config SND_SOC_EUKREA_TLV320
 	depends on I2C
 	select SND_SOC_TLV320AIC23
 	select SND_MXC_SOC_FIQ
+	select SND_SOC_IMX_AUDMUX
+	select SND_SOC_IMX_SSI
 	help
 	  Enable I2S based access to the TLV320AIC23B codec attached
 	  to the SSI interface

sound/soc/imx/Makefile

@@ -1,11 +1,14 @@
 # i.MX Platform Support
-snd-soc-imx-objs := imx-ssi.o
-snd-soc-imx-fiq-objs := imx-pcm-fiq.o
-snd-soc-imx-mx2-objs := imx-pcm-dma-mx2.o
+snd-soc-imx-ssi-objs := imx-ssi.o
+snd-soc-imx-audmux-objs := imx-audmux.o
 
-obj-$(CONFIG_SND_IMX_SOC) += snd-soc-imx.o
-obj-$(CONFIG_SND_MXC_SOC_FIQ) += snd-soc-imx-fiq.o
-obj-$(CONFIG_SND_MXC_SOC_MX2) += snd-soc-imx-mx2.o
+obj-$(CONFIG_SND_SOC_IMX_SSI) += snd-soc-imx-ssi.o
+obj-$(CONFIG_SND_SOC_IMX_AUDMUX) += snd-soc-imx-audmux.o
+
+obj-$(CONFIG_SND_SOC_IMX_PCM) += snd-soc-imx-pcm.o
+snd-soc-imx-pcm-y := imx-pcm.o
+snd-soc-imx-pcm-$(CONFIG_SND_MXC_SOC_FIQ) += imx-pcm-fiq.o
+snd-soc-imx-pcm-$(CONFIG_SND_MXC_SOC_MX2) += imx-pcm-dma-mx2.o
 
 # i.MX Machine Support
 snd-soc-eukrea-tlv320-objs := eukrea-tlv320.o

sound/soc/imx/eukrea-tlv320.c

@@ -26,6 +26,7 @@
 
 #include "../codecs/tlv320aic23.h"
 #include "imx-ssi.h"
+#include "imx-audmux.h"
 
 #define CODEC_CLOCK 12000000
 
@@ -97,12 +98,43 @@ static struct platform_device *eukrea_tlv320_snd_device;
 static int __init eukrea_tlv320_init(void)
 {
 	int ret;
-
-	if (!machine_is_eukrea_cpuimx27() && !machine_is_eukrea_cpuimx25sd()
-		&& !machine_is_eukrea_cpuimx35sd()
-		&& !machine_is_eukrea_cpuimx51sd())
+	int int_port = 0, ext_port;
+
+	if (machine_is_eukrea_cpuimx27()) {
+		imx_audmux_v1_configure_port(MX27_AUDMUX_HPCR1_SSI0,
+			IMX_AUDMUX_V1_PCR_SYN |
+			IMX_AUDMUX_V1_PCR_TFSDIR |
+			IMX_AUDMUX_V1_PCR_TCLKDIR |
+			IMX_AUDMUX_V1_PCR_RFSDIR |
+			IMX_AUDMUX_V1_PCR_RCLKDIR |
+			IMX_AUDMUX_V1_PCR_TFCSEL(MX27_AUDMUX_HPCR3_SSI_PINS_4) |
+			IMX_AUDMUX_V1_PCR_RFCSEL(MX27_AUDMUX_HPCR3_SSI_PINS_4) |
+			IMX_AUDMUX_V1_PCR_RXDSEL(MX27_AUDMUX_HPCR3_SSI_PINS_4)
+		);
+		imx_audmux_v1_configure_port(MX27_AUDMUX_HPCR3_SSI_PINS_4,
+			IMX_AUDMUX_V1_PCR_SYN |
+			IMX_AUDMUX_V1_PCR_RXDSEL(MX27_AUDMUX_HPCR1_SSI0)
+		);
+	} else if (machine_is_eukrea_cpuimx25sd() ||
+		   machine_is_eukrea_cpuimx35sd() ||
+		   machine_is_eukrea_cpuimx51sd()) {
+		ext_port = machine_is_eukrea_cpuimx25sd() ? 4 : 3;
+		imx_audmux_v2_configure_port(int_port,
+			IMX_AUDMUX_V2_PTCR_SYN |
+			IMX_AUDMUX_V2_PTCR_TFSDIR |
+			IMX_AUDMUX_V2_PTCR_TFSEL(ext_port) |
+			IMX_AUDMUX_V2_PTCR_TCLKDIR |
+			IMX_AUDMUX_V2_PTCR_TCSEL(ext_port),
+			IMX_AUDMUX_V2_PDCR_RXDSEL(ext_port)
+		);
+		imx_audmux_v2_configure_port(ext_port,
+			IMX_AUDMUX_V2_PTCR_SYN,
+			IMX_AUDMUX_V2_PDCR_RXDSEL(int_port)
+		);
+	} else {
 		/* return happy. We might run on a totally different machine */
 		return 0;
+	}
 
 	eukrea_tlv320_snd_device = platform_device_alloc("soc-audio", -1);
 	if (!eukrea_tlv320_snd_device)

arch/arm/plat-mxc/audmux-v2.c → sound/soc/imx/imx-audmux.c

@@ -1,4 +1,6 @@
 /*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ * Copyright 2012 Linaro Ltd.
  * Copyright 2009 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de>
  *
  * Initial development of this code was funded by
@@ -15,20 +17,25 @@
  * GNU General Public License for more details.
  */
 
-#include <linux/module.h>
-#include <linux/err.h>
-#include <linux/io.h>
 #include <linux/clk.h>
 #include <linux/debugfs.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
 #include <linux/slab.h>
-#include <mach/audmux.h>
-#include <mach/hardware.h>
+
+#include "imx-audmux.h"
+
+#define DRIVER_NAME "imx-audmux"
 
 static struct clk *audmux_clk;
 static void __iomem *audmux_base;
 
-#define MXC_AUDMUX_V2_PTCR(x)		((x) * 8)
-#define MXC_AUDMUX_V2_PDCR(x)		((x) * 8 + 4)
+#define IMX_AUDMUX_V2_PTCR(x)		((x) * 8)
+#define IMX_AUDMUX_V2_PDCR(x)		((x) * 8 + 4)
 
 #ifdef CONFIG_DEBUG_FS
 static struct dentry *audmux_debugfs_root;
@@ -75,8 +82,8 @@ static ssize_t audmux_read_file(struct file *file, char __user *user_buf,
 	if (audmux_clk)
 		clk_enable(audmux_clk);
 
-	ptcr = readl(audmux_base + MXC_AUDMUX_V2_PTCR(port));
-	pdcr = readl(audmux_base + MXC_AUDMUX_V2_PDCR(port));
+	ptcr = readl(audmux_base + IMX_AUDMUX_V2_PTCR(port));
+	pdcr = readl(audmux_base + IMX_AUDMUX_V2_PDCR(port));
 
 	if (audmux_clk)
 		clk_disable(audmux_clk);
@@ -84,7 +91,7 @@ static ssize_t audmux_read_file(struct file *file, char __user *user_buf,
 	ret = snprintf(buf, PAGE_SIZE, "PDCR: %08x\nPTCR: %08x\n",
 		       pdcr, ptcr);
 
-	if (ptcr & MXC_AUDMUX_V2_PTCR_TFSDIR)
+	if (ptcr & IMX_AUDMUX_V2_PTCR_TFSDIR)
 		ret += snprintf(buf + ret, PAGE_SIZE - ret,
 				"TxFS output from %s, ",
 				audmux_port_string((ptcr >> 27) & 0x7));
@@ -92,7 +99,7 @@ static ssize_t audmux_read_file(struct file *file, char __user *user_buf,
 		ret += snprintf(buf + ret, PAGE_SIZE - ret,
 				"TxFS input, ");
 
-	if (ptcr & MXC_AUDMUX_V2_PTCR_TCLKDIR)
+	if (ptcr & IMX_AUDMUX_V2_PTCR_TCLKDIR)
 		ret += snprintf(buf + ret, PAGE_SIZE - ret,
 				"TxClk output from %s",
 				audmux_port_string((ptcr >> 22) & 0x7));
@@ -102,11 +109,11 @@ static ssize_t audmux_read_file(struct file *file, char __user *user_buf,
 
 	ret += snprintf(buf + ret, PAGE_SIZE - ret, "\n");
 
-	if (ptcr & MXC_AUDMUX_V2_PTCR_SYN) {
+	if (ptcr & IMX_AUDMUX_V2_PTCR_SYN) {
 		ret += snprintf(buf + ret, PAGE_SIZE - ret,
 				"Port is symmetric");
 	} else {
-		if (ptcr & MXC_AUDMUX_V2_PTCR_RFSDIR)
+		if (ptcr & IMX_AUDMUX_V2_PTCR_RFSDIR)
 			ret += snprintf(buf + ret, PAGE_SIZE - ret,
 					"RxFS output from %s, ",
 					audmux_port_string((ptcr >> 17) & 0x7));
@@ -114,7 +121,7 @@ static ssize_t audmux_read_file(struct file *file, char __user *user_buf,
 			ret += snprintf(buf + ret, PAGE_SIZE - ret,
 					"RxFS input, ");
 
-		if (ptcr & MXC_AUDMUX_V2_PTCR_RCLKDIR)
+		if (ptcr & IMX_AUDMUX_V2_PTCR_RCLKDIR)
 			ret += snprintf(buf + ret, PAGE_SIZE - ret,
 					"RxClk output from %s",
 					audmux_port_string((ptcr >> 12) & 0x7));
@@ -140,7 +147,7 @@ static const struct file_operations audmux_debugfs_fops = {
 	.llseek = default_llseek,
 };
 
-static void audmux_debugfs_init(void)
+static void __init audmux_debugfs_init(void)
 {
 	int i;
 	char buf[20];
@@ -159,61 +166,149 @@ static void audmux_debugfs_init(void)
 				   i);
 	}
 }
+
+static void __exit audmux_debugfs_remove(void)
+{
+	debugfs_remove_recursive(audmux_debugfs_root);
+}
 #else
 static inline void audmux_debugfs_init(void)
 {
 }
+
+static inline void audmux_debugfs_remove(void)
+{
+}
 #endif
 
-int mxc_audmux_v2_configure_port(unsigned int port, unsigned int ptcr,
+enum imx_audmux_type {
+	IMX21_AUDMUX,
+	IMX31_AUDMUX,
+} audmux_type;
+
+static struct platform_device_id imx_audmux_ids[] = {
+	{
+		.name = "imx21-audmux",
+		.driver_data = IMX21_AUDMUX,
+	}, {
+		.name = "imx31-audmux",
+		.driver_data = IMX31_AUDMUX,
+	}, {
+		/* sentinel */
+	}
+};
+MODULE_DEVICE_TABLE(platform, imx_audmux_ids);
+
+static const struct of_device_id imx_audmux_dt_ids[] = {
+	{ .compatible = "fsl,imx21-audmux", .data = &imx_audmux_ids[0], },
+	{ .compatible = "fsl,imx31-audmux", .data = &imx_audmux_ids[1], },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, imx_audmux_dt_ids);
+
+static const uint8_t port_mapping[] = {
+	0x0, 0x4, 0x8, 0x10, 0x14, 0x1c,
+};
+
+int imx_audmux_v1_configure_port(unsigned int port, unsigned int pcr)
+{
+	if (audmux_type != IMX21_AUDMUX)
+		return -EINVAL;
+
+	if (!audmux_base)
+		return -ENOSYS;
+
+	if (port >= ARRAY_SIZE(port_mapping))
+		return -EINVAL;
+
+	writel(pcr, audmux_base + port_mapping[port]);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(imx_audmux_v1_configure_port);
+
+int imx_audmux_v2_configure_port(unsigned int port, unsigned int ptcr,
 		unsigned int pdcr)
 {
+	if (audmux_type != IMX31_AUDMUX)
+		return -EINVAL;
+
 	if (!audmux_base)
 		return -ENOSYS;
 
 	if (audmux_clk)
 		clk_enable(audmux_clk);
 
-	writel(ptcr, audmux_base + MXC_AUDMUX_V2_PTCR(port));
-	writel(pdcr, audmux_base + MXC_AUDMUX_V2_PDCR(port));
+	writel(ptcr, audmux_base + IMX_AUDMUX_V2_PTCR(port));
+	writel(pdcr, audmux_base + IMX_AUDMUX_V2_PDCR(port));
 
 	if (audmux_clk)
 		clk_disable(audmux_clk);
 
 	return 0;
 }
-EXPORT_SYMBOL_GPL(mxc_audmux_v2_configure_port);
+EXPORT_SYMBOL_GPL(imx_audmux_v2_configure_port);
 
-static int mxc_audmux_v2_init(void)
+static int __init imx_audmux_probe(struct platform_device *pdev)
 {
-	int ret;
-	if (cpu_is_mx51()) {
-		audmux_base = MX51_IO_ADDRESS(MX51_AUDMUX_BASE_ADDR);
-	} else if (cpu_is_mx31()) {
-		audmux_base = MX31_IO_ADDRESS(MX31_AUDMUX_BASE_ADDR);
-	} else if (cpu_is_mx35()) {
-		audmux_clk = clk_get(NULL, "audmux");
-		if (IS_ERR(audmux_clk)) {
-			ret = PTR_ERR(audmux_clk);
-			printk(KERN_ERR "%s: cannot get clock: %d\n", __func__,
-					ret);
-			return ret;
-		}
-		audmux_base = MX35_IO_ADDRESS(MX35_AUDMUX_BASE_ADDR);
-	} else if (cpu_is_mx25()) {
-		audmux_clk = clk_get(NULL, "audmux");
-		if (IS_ERR(audmux_clk)) {
-			ret = PTR_ERR(audmux_clk);
-			printk(KERN_ERR "%s: cannot get clock: %d\n", __func__,
-					ret);
-			return ret;
-		}
-		audmux_base = MX25_IO_ADDRESS(MX25_AUDMUX_BASE_ADDR);
+	struct resource *res;
+	const struct of_device_id *of_id =
+			of_match_device(imx_audmux_dt_ids, &pdev->dev);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	audmux_base = devm_request_and_ioremap(&pdev->dev, res);
+	if (!audmux_base)
+		return -EADDRNOTAVAIL;
+
+	audmux_clk = clk_get(&pdev->dev, "audmux");
+	if (IS_ERR(audmux_clk)) {
+		dev_dbg(&pdev->dev, "cannot get clock: %ld\n",
+				PTR_ERR(audmux_clk));
+		audmux_clk = NULL;
 	}
 
-	audmux_debugfs_init();
+	if (of_id)
+		pdev->id_entry = of_id->data;
+	audmux_type = pdev->id_entry->driver_data;
+	if (audmux_type == IMX31_AUDMUX)
+		audmux_debugfs_init();
+
+	return 0;
+}
+
+static int __exit imx_audmux_remove(struct platform_device *pdev)
+{
+	if (audmux_type == IMX31_AUDMUX)
+		audmux_debugfs_remove();
+	clk_put(audmux_clk);
 
 	return 0;
 }
 
-postcore_initcall(mxc_audmux_v2_init);
+static struct platform_driver imx_audmux_driver = {
+	.probe		= imx_audmux_probe,
+	.remove		= __exit_p(imx_audmux_remove),
+	.id_table	= imx_audmux_ids,
+	.driver	= {
+		.name	= DRIVER_NAME,
+		.owner	= THIS_MODULE,
+		.of_match_table = imx_audmux_dt_ids,
+	}
+};
+
+static int __init imx_audmux_init(void)
+{
+	return platform_driver_register(&imx_audmux_driver);
+}
+subsys_initcall(imx_audmux_init);
+
+static void __exit imx_audmux_exit(void)
+{
+	platform_driver_unregister(&imx_audmux_driver);
+}
+module_exit(imx_audmux_exit);
+
+MODULE_DESCRIPTION("Freescale i.MX AUDMUX driver");
+MODULE_AUTHOR("Sascha Hauer <s.hauer@pengutronix.de>");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:" DRIVER_NAME);

sound/soc/imx/imx-audmux.h

@@ -0,0 +1,60 @@
+#ifndef __IMX_AUDMUX_H
+#define __IMX_AUDMUX_H
+
+#define MX27_AUDMUX_HPCR1_SSI0		0
+#define MX27_AUDMUX_HPCR2_SSI1		1
+#define MX27_AUDMUX_HPCR3_SSI_PINS_4	2
+#define MX27_AUDMUX_PPCR1_SSI_PINS_1	3
+#define MX27_AUDMUX_PPCR2_SSI_PINS_2	4
+#define MX27_AUDMUX_PPCR3_SSI_PINS_3	5
+
+#define MX31_AUDMUX_PORT1_SSI0		0
+#define MX31_AUDMUX_PORT2_SSI1		1
+#define MX31_AUDMUX_PORT3_SSI_PINS_3	2
+#define MX31_AUDMUX_PORT4_SSI_PINS_4	3
+#define MX31_AUDMUX_PORT5_SSI_PINS_5	4
+#define MX31_AUDMUX_PORT6_SSI_PINS_6	5
+
+#define MX51_AUDMUX_PORT1_SSI0		0
+#define MX51_AUDMUX_PORT2_SSI1		1
+#define MX51_AUDMUX_PORT3		2
+#define MX51_AUDMUX_PORT4		3
+#define MX51_AUDMUX_PORT5		4
+#define MX51_AUDMUX_PORT6		5
+#define MX51_AUDMUX_PORT7		6
+
+/* Register definitions for the i.MX21/27 Digital Audio Multiplexer */
+#define IMX_AUDMUX_V1_PCR_INMMASK(x)	((x) & 0xff)
+#define IMX_AUDMUX_V1_PCR_INMEN		(1 << 8)
+#define IMX_AUDMUX_V1_PCR_TXRXEN	(1 << 10)
+#define IMX_AUDMUX_V1_PCR_SYN		(1 << 12)
+#define IMX_AUDMUX_V1_PCR_RXDSEL(x)	(((x) & 0x7) << 13)
+#define IMX_AUDMUX_V1_PCR_RFCSEL(x)	(((x) & 0xf) << 20)
+#define IMX_AUDMUX_V1_PCR_RCLKDIR	(1 << 24)
+#define IMX_AUDMUX_V1_PCR_RFSDIR	(1 << 25)
+#define IMX_AUDMUX_V1_PCR_TFCSEL(x)	(((x) & 0xf) << 26)
+#define IMX_AUDMUX_V1_PCR_TCLKDIR	(1 << 30)
+#define IMX_AUDMUX_V1_PCR_TFSDIR	(1 << 31)
+
+/* Register definitions for the i.MX25/31/35/51 Digital Audio Multiplexer */
+#define IMX_AUDMUX_V2_PTCR_TFSDIR	(1 << 31)
+#define IMX_AUDMUX_V2_PTCR_TFSEL(x)	(((x) & 0xf) << 27)
+#define IMX_AUDMUX_V2_PTCR_TCLKDIR	(1 << 26)
+#define IMX_AUDMUX_V2_PTCR_TCSEL(x)	(((x) & 0xf) << 22)
+#define IMX_AUDMUX_V2_PTCR_RFSDIR	(1 << 21)
+#define IMX_AUDMUX_V2_PTCR_RFSEL(x)	(((x) & 0xf) << 17)
+#define IMX_AUDMUX_V2_PTCR_RCLKDIR	(1 << 16)
+#define IMX_AUDMUX_V2_PTCR_RCSEL(x)	(((x) & 0xf) << 12)
+#define IMX_AUDMUX_V2_PTCR_SYN		(1 << 11)
+
+#define IMX_AUDMUX_V2_PDCR_RXDSEL(x)	(((x) & 0x7) << 13)
+#define IMX_AUDMUX_V2_PDCR_TXRXEN	(1 << 12)
+#define IMX_AUDMUX_V2_PDCR_MODE(x)	(((x) & 0x3) << 8)
+#define IMX_AUDMUX_V2_PDCR_INMMASK(x)	((x) & 0xff)
+
+int imx_audmux_v1_configure_port(unsigned int port, unsigned int pcr);
+
+int imx_audmux_v2_configure_port(unsigned int port, unsigned int ptcr,
+		unsigned int pdcr);
+
+#endif /* __IMX_AUDMUX_H */

sound/soc/imx/imx-pcm-dma-mx2.c

@@ -31,7 +31,7 @@
 
 #include <mach/dma.h>
 
-#include "imx-ssi.h"
+#include "imx-pcm.h"
 
 static bool filter(struct dma_chan *chan, void *param)
 {

sound/soc/imx/imx-pcm.c

@@ -0,0 +1,105 @@
+/*
+ * Copyright 2009 Sascha Hauer <s.hauer@pengutronix.de>
+ *
+ * This code is based on code copyrighted by Freescale,
+ * Liam Girdwood, Javier Martin and probably others.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/dma-mapping.h>
+#include <linux/module.h>
+#include <sound/pcm.h>
+#include <sound/soc.h>
+#include "imx-pcm.h"
+
+int snd_imx_pcm_mmap(struct snd_pcm_substream *substream,
+		struct vm_area_struct *vma)
+{
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	int ret;
+
+	ret = dma_mmap_writecombine(substream->pcm->card->dev, vma,
+		runtime->dma_area, runtime->dma_addr, runtime->dma_bytes);
+
+	pr_debug("%s: ret: %d %p 0x%08x 0x%08x\n", __func__, ret,
+			runtime->dma_area,
+			runtime->dma_addr,
+			runtime->dma_bytes);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(snd_imx_pcm_mmap);
+
+static int imx_pcm_preallocate_dma_buffer(struct snd_pcm *pcm, int stream)
+{
+	struct snd_pcm_substream *substream = pcm->streams[stream].substream;
+	struct snd_dma_buffer *buf = &substream->dma_buffer;
+	size_t size = IMX_SSI_DMABUF_SIZE;
+
+	buf->dev.type = SNDRV_DMA_TYPE_DEV;
+	buf->dev.dev = pcm->card->dev;
+	buf->private_data = NULL;
+	buf->area = dma_alloc_writecombine(pcm->card->dev, size,
+					   &buf->addr, GFP_KERNEL);
+	if (!buf->area)
+		return -ENOMEM;
+	buf->bytes = size;
+
+	return 0;
+}
+
+static u64 imx_pcm_dmamask = DMA_BIT_MASK(32);
+
+int imx_pcm_new(struct snd_soc_pcm_runtime *rtd)
+{
+	struct snd_card *card = rtd->card->snd_card;
+	struct snd_pcm *pcm = rtd->pcm;
+	int ret = 0;
+
+	if (!card->dev->dma_mask)
+		card->dev->dma_mask = &imx_pcm_dmamask;
+	if (!card->dev->coherent_dma_mask)
+		card->dev->coherent_dma_mask = DMA_BIT_MASK(32);
+	if (pcm->streams[SNDRV_PCM_STREAM_PLAYBACK].substream) {
+		ret = imx_pcm_preallocate_dma_buffer(pcm,
+			SNDRV_PCM_STREAM_PLAYBACK);
+		if (ret)
+			goto out;
+	}
+
+	if (pcm->streams[SNDRV_PCM_STREAM_CAPTURE].substream) {
+		ret = imx_pcm_preallocate_dma_buffer(pcm,
+			SNDRV_PCM_STREAM_CAPTURE);
+		if (ret)
+			goto out;
+	}
+
+out:
+	return ret;
+}
+EXPORT_SYMBOL_GPL(imx_pcm_new);
+
+void imx_pcm_free(struct snd_pcm *pcm)
+{
+	struct snd_pcm_substream *substream;
+	struct snd_dma_buffer *buf;
+	int stream;
+
+	for (stream = 0; stream < 2; stream++) {
+		substream = pcm->streams[stream].substream;
+		if (!substream)
+			continue;
+
+		buf = &substream->dma_buffer;
+		if (!buf->area)
+			continue;
+
+		dma_free_writecombine(pcm->card->dev, buf->bytes,
+				      buf->area, buf->addr);
+		buf->area = NULL;
+	}
+}
+EXPORT_SYMBOL_GPL(imx_pcm_free);

sound/soc/imx/imx-pcm.h

@@ -0,0 +1,32 @@
+/*
+ * Copyright 2009 Sascha Hauer <s.hauer@pengutronix.de>
+ *
+ * This code is based on code copyrighted by Freescale,
+ * Liam Girdwood, Javier Martin and probably others.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#ifndef _IMX_PCM_H
+#define _IMX_PCM_H
+
+/*
+ * Do not change this as the FIQ handler depends on this size
+ */
+#define IMX_SSI_DMABUF_SIZE	(64 * 1024)
+
+struct imx_pcm_dma_params {
+	int dma;
+	unsigned long dma_addr;
+	int burstsize;
+};
+
+int snd_imx_pcm_mmap(struct snd_pcm_substream *substream,
+		     struct vm_area_struct *vma);
+int imx_pcm_new(struct snd_soc_pcm_runtime *rtd);
+void imx_pcm_free(struct snd_pcm *pcm);
+
+#endif /* _IMX_PCM_H */

sound/soc/imx/imx-ssi.c

@@ -363,94 +363,6 @@ static const struct snd_soc_dai_ops imx_ssi_pcm_dai_ops = {
 	.trigger	= imx_ssi_trigger,
 };
 
-int snd_imx_pcm_mmap(struct snd_pcm_substream *substream,
-		struct vm_area_struct *vma)
-{
-	struct snd_pcm_runtime *runtime = substream->runtime;
-	int ret;
-
-	ret = dma_mmap_writecombine(substream->pcm->card->dev, vma,
-		runtime->dma_area, runtime->dma_addr, runtime->dma_bytes);
-
-	pr_debug("%s: ret: %d %p 0x%08x 0x%08x\n", __func__, ret,
-			runtime->dma_area,
-			runtime->dma_addr,
-			runtime->dma_bytes);
-	return ret;
-}
-EXPORT_SYMBOL_GPL(snd_imx_pcm_mmap);
-
-static int imx_pcm_preallocate_dma_buffer(struct snd_pcm *pcm, int stream)
-{
-	struct snd_pcm_substream *substream = pcm->streams[stream].substream;
-	struct snd_dma_buffer *buf = &substream->dma_buffer;
-	size_t size = IMX_SSI_DMABUF_SIZE;
-
-	buf->dev.type = SNDRV_DMA_TYPE_DEV;
-	buf->dev.dev = pcm->card->dev;
-	buf->private_data = NULL;
-	buf->area = dma_alloc_writecombine(pcm->card->dev, size,
-					   &buf->addr, GFP_KERNEL);
-	if (!buf->area)
-		return -ENOMEM;
-	buf->bytes = size;
-
-	return 0;
-}
-
-static u64 imx_pcm_dmamask = DMA_BIT_MASK(32);
-
-int imx_pcm_new(struct snd_soc_pcm_runtime *rtd)
-{
-	struct snd_card *card = rtd->card->snd_card;
-	struct snd_pcm *pcm = rtd->pcm;
-	int ret = 0;
-
-	if (!card->dev->dma_mask)
-		card->dev->dma_mask = &imx_pcm_dmamask;
-	if (!card->dev->coherent_dma_mask)
-		card->dev->coherent_dma_mask = DMA_BIT_MASK(32);
-	if (pcm->streams[SNDRV_PCM_STREAM_PLAYBACK].substream) {
-		ret = imx_pcm_preallocate_dma_buffer(pcm,
-			SNDRV_PCM_STREAM_PLAYBACK);
-		if (ret)
-			goto out;
-	}
-
-	if (pcm->streams[SNDRV_PCM_STREAM_CAPTURE].substream) {
-		ret = imx_pcm_preallocate_dma_buffer(pcm,
-			SNDRV_PCM_STREAM_CAPTURE);
-		if (ret)
-			goto out;
-	}
-
-out:
-	return ret;
-}
-EXPORT_SYMBOL_GPL(imx_pcm_new);
-
-void imx_pcm_free(struct snd_pcm *pcm)
-{
-	struct snd_pcm_substream *substream;
-	struct snd_dma_buffer *buf;
-	int stream;
-
-	for (stream = 0; stream < 2; stream++) {
-		substream = pcm->streams[stream].substream;
-		if (!substream)
-			continue;
-
-		buf = &substream->dma_buffer;
-		if (!buf->area)
-			continue;
-
-		dma_free_writecombine(pcm->card->dev, buf->bytes,
-				      buf->area, buf->addr);
-		buf->area = NULL;
-	}
-}
-EXPORT_SYMBOL_GPL(imx_pcm_free);
-
 static int imx_ssi_dai_probe(struct snd_soc_dai *dai)
 {
 	struct imx_ssi *ssi = dev_get_drvdata(dai->dev);

sound/soc/imx/imx-ssi.h

@@ -187,12 +187,7 @@
 
 #include <linux/dmaengine.h>
 #include <mach/dma.h>
-
-struct imx_pcm_dma_params {
-	int dma;
-	unsigned long dma_addr;
-	int burstsize;
-};
+#include "imx-pcm.h"
 
 struct imx_ssi {
 	struct platform_device *ac97_dev;
@@ -218,13 +213,4 @@ struct imx_ssi {
 	struct platform_device *soc_platform_pdev_fiq;
 };
 
-int snd_imx_pcm_mmap(struct snd_pcm_substream *substream, struct vm_area_struct *vma);
-int imx_pcm_new(struct snd_soc_pcm_runtime *rtd);
-void imx_pcm_free(struct snd_pcm *pcm);
-
-/*
- * Do not change this as the FIQ handler depends on this size
- */
-#define IMX_SSI_DMABUF_SIZE	(64 * 1024)
-
 #endif /* _IMX_SSI_H */

sound/soc/imx/mx27vis-aic32x4.c

@@ -32,11 +32,11 @@
 #include <sound/soc-dapm.h>
 #include <sound/tlv.h>
 #include <asm/mach-types.h>
-#include <mach/audmux.h>
 #include <mach/iomux-mx27.h>
 
 #include "../codecs/tlv320aic32x4.h"
 #include "imx-ssi.h"
+#include "imx-audmux.h"
 
 #define MX27VIS_AMP_GAIN	0
 #define MX27VIS_AMP_MUTE	1
@@ -207,16 +207,16 @@ static int __init mx27vis_aic32x4_init(void)
 	}
 
 	/* Connect SSI0 as clock slave to SSI1 external pins */
-	mxc_audmux_v1_configure_port(MX27_AUDMUX_HPCR1_SSI0,
-			MXC_AUDMUX_V1_PCR_SYN |
-			MXC_AUDMUX_V1_PCR_TFSDIR |
-			MXC_AUDMUX_V1_PCR_TCLKDIR |
-			MXC_AUDMUX_V1_PCR_TFCSEL(MX27_AUDMUX_PPCR1_SSI_PINS_1) |
-			MXC_AUDMUX_V1_PCR_RXDSEL(MX27_AUDMUX_PPCR1_SSI_PINS_1)
+	imx_audmux_v1_configure_port(MX27_AUDMUX_HPCR1_SSI0,
+			IMX_AUDMUX_V1_PCR_SYN |
+			IMX_AUDMUX_V1_PCR_TFSDIR |
+			IMX_AUDMUX_V1_PCR_TCLKDIR |
+			IMX_AUDMUX_V1_PCR_TFCSEL(MX27_AUDMUX_PPCR1_SSI_PINS_1) |
+			IMX_AUDMUX_V1_PCR_RXDSEL(MX27_AUDMUX_PPCR1_SSI_PINS_1)
 	);
-	mxc_audmux_v1_configure_port(MX27_AUDMUX_PPCR1_SSI_PINS_1,
-			MXC_AUDMUX_V1_PCR_SYN |
-			MXC_AUDMUX_V1_PCR_RXDSEL(MX27_AUDMUX_HPCR1_SSI0)
+	imx_audmux_v1_configure_port(MX27_AUDMUX_PPCR1_SSI_PINS_1,
+			IMX_AUDMUX_V1_PCR_SYN |
+			IMX_AUDMUX_V1_PCR_RXDSEL(MX27_AUDMUX_HPCR1_SSI0)
 	);
 
 	ret = mxc_gpio_setup_multiple_pins(mx27vis_amp_pins,

sound/soc/imx/phycore-ac97.c

@@ -19,6 +19,8 @@
 #include <sound/soc.h>
 #include <asm/mach-types.h>
 
+#include "imx-audmux.h"
+
 static struct snd_soc_card imx_phycore;
 
 static struct snd_soc_ops imx_phycore_hifi_ops = {
@@ -50,9 +52,32 @@ static int __init imx_phycore_init(void)
 {
 	int ret;
 
-	if (!machine_is_pcm043() && !machine_is_pca100())
+	if (machine_is_pca100()) {
+		imx_audmux_v1_configure_port(MX27_AUDMUX_HPCR1_SSI0,
+			IMX_AUDMUX_V1_PCR_SYN | /* 4wire mode */
+			IMX_AUDMUX_V1_PCR_TFCSEL(3) |
+			IMX_AUDMUX_V1_PCR_TCLKDIR | /* clock is output */
+			IMX_AUDMUX_V1_PCR_RXDSEL(3));
+		imx_audmux_v1_configure_port(3,
+			IMX_AUDMUX_V1_PCR_SYN | /* 4wire mode */
+			IMX_AUDMUX_V1_PCR_TFCSEL(0) |
+			IMX_AUDMUX_V1_PCR_TFSDIR |
+			IMX_AUDMUX_V1_PCR_RXDSEL(0));
+	} else if (machine_is_pcm043()) {
+		imx_audmux_v2_configure_port(3,
+			IMX_AUDMUX_V2_PTCR_SYN | /* 4wire mode */
+			IMX_AUDMUX_V2_PTCR_TFSEL(0) |
+			IMX_AUDMUX_V2_PTCR_TFSDIR,
+			IMX_AUDMUX_V2_PDCR_RXDSEL(0));
+		imx_audmux_v2_configure_port(0,
+			IMX_AUDMUX_V2_PTCR_SYN | /* 4wire mode */
+			IMX_AUDMUX_V2_PTCR_TCSEL(3) |
+			IMX_AUDMUX_V2_PTCR_TCLKDIR, /* clock is output */
+			IMX_AUDMUX_V2_PDCR_RXDSEL(3));
+	} else {
 		/* return happy. We might run on a totally different machine */
 		return 0;
+	}
 
 	imx_phycore_snd_ac97_device = platform_device_alloc("soc-audio", -1);
 	if (!imx_phycore_snd_ac97_device)

sound/soc/imx/wm1133-ev1.c

@@ -21,10 +21,9 @@
 #include <sound/pcm_params.h>
 #include <sound/soc.h>
 
-#include <mach/audmux.h>
-
 #include "imx-ssi.h"
 #include "../codecs/wm8350.h"
+#include "imx-audmux.h"
 
 /* There is a silicon mic on the board optionally connected via a solder pad
  * SP1.  Define this to enable it.
@@ -268,17 +267,17 @@ static int __init wm1133_ev1_audio_init(void)
 	unsigned int ptcr, pdcr;
 
 	/* SSI0 mastered by port 5 */
-	ptcr = MXC_AUDMUX_V2_PTCR_SYN |
-		MXC_AUDMUX_V2_PTCR_TFSDIR |
-		MXC_AUDMUX_V2_PTCR_TFSEL(MX31_AUDMUX_PORT5_SSI_PINS_5) |
-		MXC_AUDMUX_V2_PTCR_TCLKDIR |
-		MXC_AUDMUX_V2_PTCR_TCSEL(MX31_AUDMUX_PORT5_SSI_PINS_5);
-	pdcr = MXC_AUDMUX_V2_PDCR_RXDSEL(MX31_AUDMUX_PORT5_SSI_PINS_5);
-	mxc_audmux_v2_configure_port(MX31_AUDMUX_PORT1_SSI0, ptcr, pdcr);
-
-	ptcr = MXC_AUDMUX_V2_PTCR_SYN;
-	pdcr = MXC_AUDMUX_V2_PDCR_RXDSEL(MX31_AUDMUX_PORT1_SSI0);
-	mxc_audmux_v2_configure_port(MX31_AUDMUX_PORT5_SSI_PINS_5, ptcr, pdcr);
+	ptcr = IMX_AUDMUX_V2_PTCR_SYN |
+		IMX_AUDMUX_V2_PTCR_TFSDIR |
+		IMX_AUDMUX_V2_PTCR_TFSEL(MX31_AUDMUX_PORT5_SSI_PINS_5) |
+		IMX_AUDMUX_V2_PTCR_TCLKDIR |
+		IMX_AUDMUX_V2_PTCR_TCSEL(MX31_AUDMUX_PORT5_SSI_PINS_5);
+	pdcr = IMX_AUDMUX_V2_PDCR_RXDSEL(MX31_AUDMUX_PORT5_SSI_PINS_5);
+	imx_audmux_v2_configure_port(MX31_AUDMUX_PORT1_SSI0, ptcr, pdcr);
+
+	ptcr = IMX_AUDMUX_V2_PTCR_SYN;
+	pdcr = IMX_AUDMUX_V2_PDCR_RXDSEL(MX31_AUDMUX_PORT1_SSI0);
+	imx_audmux_v2_configure_port(MX31_AUDMUX_PORT5_SSI_PINS_5, ptcr, pdcr);
 
 	wm1133_ev1_snd_device = platform_device_alloc("soc-audio", -1);
 	if (!wm1133_ev1_snd_device)

sound/soc/soc-dapm.c

@@ -1569,8 +1569,9 @@ static ssize_t dapm_widget_power_read_file(struct file *file,
 	out = is_connected_output_ep(w);
 	dapm_clear_walk(w->dapm);
 
-	ret = snprintf(buf, PAGE_SIZE, "%s: %s  in %d out %d",
-		       w->name, w->power ? "On" : "Off", in, out);
+	ret = snprintf(buf, PAGE_SIZE, "%s: %s%s  in %d out %d",
+		       w->name, w->power ? "On" : "Off",
+		       w->force ? " (forced)" : "", in, out);
 
 	if (w->reg >= 0)
 		ret += snprintf(buf + ret, PAGE_SIZE - ret,