Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (38 commits)
  V4L/DVB (12441): siano: read buffer overflow
  V4L/DVB (12440): Use kzalloc for frontend states to have struct dvb_frontend properly
  V4L/DVB (12438): Read buffer overflow
  V4L/DVB (12437): dvb: siano uses/depends on INPUT
  V4L/DVB (12436): stk-webcam: read buffer overflow
  V4L/DVB (12432): em28xx: fix regression in Empire DualTV digital tuning
  V4L/DVB (12429): v4l2-ioctl: fix G_STD and G_PARM default handlers
  V4L/DVB (12428): hdpvr: add missing initialization of current_norm
  V4L/DVB (12424): soc-camera: fix recursive locking in .buf_queue()
  V4L/DVB (12422): media/zr364xx: fix build errors
  V4L/DVB (12405): em28xx-cards: move register 0x13 setting to the proper place
  V4L/DVB (12411): em28xx: Fix artifacts with Silvercrest webcam
  V4L/DVB (12410): em28xx: Move the non-board dependent part to be outside em28xx_pre_card_setup()
  V4L/DVB (12407): em28xx: Adjust Silvercrest xtal frequency
  V4L/DVB (12406): em28xx: fix: don't do image interlacing on webcams
  V4L/DVB (12403): em28xx: properly reports some em2710 chips
  V4L/DVB (12402): em28xx: fix: some em2710 chips use a different vendor ID
  V4L/DVB (12401): m9v011: add vflip/hflip controls to control mirror/upside down
  V4L/DVB (12400): em28xx: Allow changing fps on webcams
  V4L/DVB (12399): mt9v011: Add support for controlling frame rates
  ...

Documentation/video4linux/CARDLIST.em28xx

@@ -1,5 +1,5 @@
   0 -> Unknown EM2800 video grabber             (em2800)        [eb1a:2800]
-  1 -> Unknown EM2750/28xx video grabber        (em2820/em2840) [eb1a:2820,eb1a:2821,eb1a:2860,eb1a:2861,eb1a:2870,eb1a:2881,eb1a:2883]
+  1 -> Unknown EM2750/28xx video grabber        (em2820/em2840) [eb1a:2710,eb1a:2820,eb1a:2821,eb1a:2860,eb1a:2861,eb1a:2870,eb1a:2881,eb1a:2883]
   2 -> Terratec Cinergy 250 USB                 (em2820/em2840) [0ccd:0036]
   3 -> Pinnacle PCTV USB 2                      (em2820/em2840) [2304:0208]
   4 -> Hauppauge WinTV USB 2                    (em2820/em2840) [2040:4200,2040:4201]

Documentation/video4linux/CARDLIST.saa7134

@@ -153,8 +153,8 @@
 152 -> Asus Tiger Rev:1.00                      [1043:4857]
 153 -> Kworld Plus TV Analog Lite PCI           [17de:7128]
 154 -> Avermedia AVerTV GO 007 FM Plus          [1461:f31d]
-155 -> Hauppauge WinTV-HVR1120 ATSC/QAM-Hybrid  [0070:6706,0070:6708]
-156 -> Hauppauge WinTV-HVR1110r3 DVB-T/Hybrid   [0070:6707,0070:6709,0070:670a]
+155 -> Hauppauge WinTV-HVR1150 ATSC/QAM-Hybrid  [0070:6706,0070:6708]
+156 -> Hauppauge WinTV-HVR1120 DVB-T/Hybrid     [0070:6707,0070:6709,0070:670a]
 157 -> Avermedia AVerTV Studio 507UA            [1461:a11b]
 158 -> AVerMedia Cardbus TV/Radio (E501R)       [1461:b7e9]
 159 -> Beholder BeholdTV 505 RDS                [0000:505B]

MAINTAINERS

@@ -2238,6 +2238,14 @@ T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
 S:	Maintained
 F:	drivers/media/video/gspca/pac207.c
 
+GSPCA SN9C20X SUBDRIVER
+P:	Brian Johnson
+M:	brijohn@gmail.com
+L:	linux-media@vger.kernel.org
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
+S:	Maintained
+F:	drivers/media/video/gspca/sn9c20x.c
+
 GSPCA T613 SUBDRIVER
 M:	Leandro Costantino <lcostantino@gmail.com>
 L:	linux-media@vger.kernel.org

drivers/media/common/tuners/qt1010.c

@@ -64,24 +64,22 @@ static int qt1010_writereg(struct qt1010_priv *priv, u8 reg, u8 val)
 /* dump all registers */
 static void qt1010_dump_regs(struct qt1010_priv *priv)
 {
-	char buf[52], buf2[4];
 	u8 reg, val;
 
 	for (reg = 0; ; reg++) {
 		if (reg % 16 == 0) {
 			if (reg)
-				printk("%s\n", buf);
-			sprintf(buf, "%02x: ", reg);
+				printk(KERN_CONT "\n");
+			printk(KERN_DEBUG "%02x:", reg);
 		}
 		if (qt1010_readreg(priv, reg, &val) == 0)
-			sprintf(buf2, "%02x ", val);
+			printk(KERN_CONT " %02x", val);
 		else
-			strcpy(buf2, "-- ");
-		strcat(buf, buf2);
+			printk(KERN_CONT " --");
 		if (reg == 0x2f)
 			break;
 	}
-	printk("%s\n", buf);
+	printk(KERN_CONT "\n");
 }
 
 static int qt1010_set_params(struct dvb_frontend *fe,

drivers/media/common/tuners/tuner-xc2028.c

@@ -1119,8 +1119,8 @@ static int xc2028_sleep(struct dvb_frontend *fe)
 	struct xc2028_data *priv = fe->tuner_priv;
 	int rc = 0;
 
-	/* Avoid firmware reload on slow devices */
-	if (no_poweroff)
+	/* Avoid firmware reload on slow devices or if PM disabled */
+	if (no_poweroff || priv->ctrl.disable_power_mgmt)
 		return 0;
 
 	tuner_dbg("Putting xc2028/3028 into poweroff mode.\n");

drivers/media/common/tuners/tuner-xc2028.h

@@ -38,6 +38,7 @@ struct xc2028_ctrl {
 	unsigned int		input1:1;
 	unsigned int		vhfbw7:1;
 	unsigned int		uhfbw8:1;
+	unsigned int		disable_power_mgmt:1;
 	unsigned int		demod;
 	enum firmware_type	type:2;
 };

drivers/media/dvb/dvb-usb/af9015.c

@@ -81,7 +81,6 @@ static int af9015_rw_udev(struct usb_device *udev, struct req_t *req)
 
 	switch (req->cmd) {
 	case GET_CONFIG:
-	case BOOT:
 	case READ_MEMORY:
 	case RECONNECT_USB:
 	case GET_IR_CODE:
@@ -100,6 +99,7 @@ static int af9015_rw_udev(struct usb_device *udev, struct req_t *req)
 	case WRITE_VIRTUAL_MEMORY:
 	case COPY_FIRMWARE:
 	case DOWNLOAD_FIRMWARE:
+	case BOOT:
 		break;
 	default:
 		err("unknown command:%d", req->cmd);

drivers/media/dvb/frontends/cx22700.c

@@ -380,7 +380,7 @@ struct dvb_frontend* cx22700_attach(const struct cx22700_config* config,
 	struct cx22700_state* state = NULL;
 
 	/* allocate memory for the internal state */
-	state = kmalloc(sizeof(struct cx22700_state), GFP_KERNEL);
+	state = kzalloc(sizeof(struct cx22700_state), GFP_KERNEL);
 	if (state == NULL) goto error;
 
 	/* setup the state */

drivers/media/dvb/frontends/cx22702.c

@@ -580,7 +580,7 @@ struct dvb_frontend *cx22702_attach(const struct cx22702_config *config,
 	struct cx22702_state *state = NULL;
 
 	/* allocate memory for the internal state */
-	state = kmalloc(sizeof(struct cx22702_state), GFP_KERNEL);
+	state = kzalloc(sizeof(struct cx22702_state), GFP_KERNEL);
 	if (state == NULL)
 		goto error;
 

drivers/media/dvb/frontends/cx24110.c

@@ -598,7 +598,7 @@ struct dvb_frontend* cx24110_attach(const struct cx24110_config* config,
 	int ret;
 
 	/* allocate memory for the internal state */
-	state = kmalloc(sizeof(struct cx24110_state), GFP_KERNEL);
+	state = kzalloc(sizeof(struct cx24110_state), GFP_KERNEL);
 	if (state == NULL) goto error;
 
 	/* setup the state */

drivers/media/dvb/frontends/dvb_dummy_fe.c

@@ -117,7 +117,7 @@ struct dvb_frontend* dvb_dummy_fe_ofdm_attach(void)
 	struct dvb_dummy_fe_state* state = NULL;
 
 	/* allocate memory for the internal state */
-	state = kmalloc(sizeof(struct dvb_dummy_fe_state), GFP_KERNEL);
+	state = kzalloc(sizeof(struct dvb_dummy_fe_state), GFP_KERNEL);
 	if (state == NULL) goto error;
 
 	/* create dvb_frontend */
@@ -137,7 +137,7 @@ struct dvb_frontend *dvb_dummy_fe_qpsk_attach(void)
 	struct dvb_dummy_fe_state* state = NULL;
 
 	/* allocate memory for the internal state */
-	state = kmalloc(sizeof(struct dvb_dummy_fe_state), GFP_KERNEL);
+	state = kzalloc(sizeof(struct dvb_dummy_fe_state), GFP_KERNEL);
 	if (state == NULL) goto error;
 
 	/* create dvb_frontend */
@@ -157,7 +157,7 @@ struct dvb_frontend *dvb_dummy_fe_qam_attach(void)
 	struct dvb_dummy_fe_state* state = NULL;
 
 	/* allocate memory for the internal state */
-	state = kmalloc(sizeof(struct dvb_dummy_fe_state), GFP_KERNEL);
+	state = kzalloc(sizeof(struct dvb_dummy_fe_state), GFP_KERNEL);
 	if (state == NULL) goto error;
 
 	/* create dvb_frontend */

drivers/media/dvb/frontends/l64781.c

@@ -501,7 +501,7 @@ struct dvb_frontend* l64781_attach(const struct l64781_config* config,
 			   { .addr = config->demod_address, .flags = I2C_M_RD, .buf = b1, .len = 1 } };
 
 	/* allocate memory for the internal state */
-	state = kmalloc(sizeof(struct l64781_state), GFP_KERNEL);
+	state = kzalloc(sizeof(struct l64781_state), GFP_KERNEL);
 	if (state == NULL) goto error;
 
 	/* setup the state */

drivers/media/dvb/frontends/lgs8gl5.c

@@ -387,7 +387,7 @@ lgs8gl5_attach(const struct lgs8gl5_config *config, struct i2c_adapter *i2c)
 	dprintk("%s\n", __func__);
 
 	/* Allocate memory for the internal state */
-	state = kmalloc(sizeof(struct lgs8gl5_state), GFP_KERNEL);
+	state = kzalloc(sizeof(struct lgs8gl5_state), GFP_KERNEL);
 	if (state == NULL)
 		goto error;
 

drivers/media/dvb/frontends/mt312.c

@@ -782,7 +782,7 @@ struct dvb_frontend *mt312_attach(const struct mt312_config *config,
 	struct mt312_state *state = NULL;
 
 	/* allocate memory for the internal state */
-	state = kmalloc(sizeof(struct mt312_state), GFP_KERNEL);
+	state = kzalloc(sizeof(struct mt312_state), GFP_KERNEL);
 	if (state == NULL)
 		goto error;
 

drivers/media/dvb/frontends/nxt6000.c

@@ -545,7 +545,7 @@ struct dvb_frontend* nxt6000_attach(const struct nxt6000_config* config,
 	struct nxt6000_state* state = NULL;
 
 	/* allocate memory for the internal state */
-	state = kmalloc(sizeof(struct nxt6000_state), GFP_KERNEL);
+	state = kzalloc(sizeof(struct nxt6000_state), GFP_KERNEL);
 	if (state == NULL) goto error;
 
 	/* setup the state */

drivers/media/dvb/frontends/or51132.c

@@ -562,7 +562,7 @@ struct dvb_frontend* or51132_attach(const struct or51132_config* config,
 	struct or51132_state* state = NULL;
 
 	/* Allocate memory for the internal state */
-	state = kmalloc(sizeof(struct or51132_state), GFP_KERNEL);
+	state = kzalloc(sizeof(struct or51132_state), GFP_KERNEL);
 	if (state == NULL)
 		return NULL;
 

drivers/media/dvb/frontends/or51211.c

@@ -527,7 +527,7 @@ struct dvb_frontend* or51211_attach(const struct or51211_config* config,
 	struct or51211_state* state = NULL;
 
 	/* Allocate memory for the internal state */
-	state = kmalloc(sizeof(struct or51211_state), GFP_KERNEL);
+	state = kzalloc(sizeof(struct or51211_state), GFP_KERNEL);
 	if (state == NULL)
 		return NULL;
 

drivers/media/dvb/frontends/s5h1409.c

@@ -796,7 +796,7 @@ struct dvb_frontend *s5h1409_attach(const struct s5h1409_config *config,
 	u16 reg;
 
 	/* allocate memory for the internal state */
-	state = kmalloc(sizeof(struct s5h1409_state), GFP_KERNEL);
+	state = kzalloc(sizeof(struct s5h1409_state), GFP_KERNEL);
 	if (state == NULL)
 		goto error;
 

drivers/media/dvb/frontends/s5h1411.c

@@ -844,7 +844,7 @@ struct dvb_frontend *s5h1411_attach(const struct s5h1411_config *config,
 	u16 reg;
 
 	/* allocate memory for the internal state */
-	state = kmalloc(sizeof(struct s5h1411_state), GFP_KERNEL);
+	state = kzalloc(sizeof(struct s5h1411_state), GFP_KERNEL);
 	if (state == NULL)
 		goto error;
 

drivers/media/dvb/frontends/si21xx.c

@@ -928,7 +928,7 @@ struct dvb_frontend *si21xx_attach(const struct si21xx_config *config,
 	dprintk("%s\n", __func__);
 
 	/* allocate memory for the internal state */
-	state = kmalloc(sizeof(struct si21xx_state), GFP_KERNEL);
+	state = kzalloc(sizeof(struct si21xx_state), GFP_KERNEL);
 	if (state == NULL)
 		goto error;
 

drivers/media/dvb/frontends/sp8870.c

@@ -557,7 +557,7 @@ struct dvb_frontend* sp8870_attach(const struct sp8870_config* config,
 	struct sp8870_state* state = NULL;
 
 	/* allocate memory for the internal state */
-	state = kmalloc(sizeof(struct sp8870_state), GFP_KERNEL);
+	state = kzalloc(sizeof(struct sp8870_state), GFP_KERNEL);
 	if (state == NULL) goto error;
 
 	/* setup the state */

drivers/media/dvb/frontends/sp887x.c

@@ -557,7 +557,7 @@ struct dvb_frontend* sp887x_attach(const struct sp887x_config* config,
 	struct sp887x_state* state = NULL;
 
 	/* allocate memory for the internal state */
-	state = kmalloc(sizeof(struct sp887x_state), GFP_KERNEL);
+	state = kzalloc(sizeof(struct sp887x_state), GFP_KERNEL);
 	if (state == NULL) goto error;
 
 	/* setup the state */

drivers/media/dvb/frontends/stv0288.c

@@ -570,7 +570,7 @@ struct dvb_frontend *stv0288_attach(const struct stv0288_config *config,
 	int id;
 
 	/* allocate memory for the internal state */
-	state = kmalloc(sizeof(struct stv0288_state), GFP_KERNEL);
+	state = kzalloc(sizeof(struct stv0288_state), GFP_KERNEL);
 	if (state == NULL)
 		goto error;
 

drivers/media/dvb/frontends/stv0297.c

@@ -663,7 +663,7 @@ struct dvb_frontend *stv0297_attach(const struct stv0297_config *config,
 	struct stv0297_state *state = NULL;
 
 	/* allocate memory for the internal state */
-	state = kmalloc(sizeof(struct stv0297_state), GFP_KERNEL);
+	state = kzalloc(sizeof(struct stv0297_state), GFP_KERNEL);
 	if (state == NULL)
 		goto error;
 

drivers/media/dvb/frontends/stv0299.c

@@ -667,7 +667,7 @@ struct dvb_frontend* stv0299_attach(const struct stv0299_config* config,
 	int id;
 
 	/* allocate memory for the internal state */
-	state = kmalloc(sizeof(struct stv0299_state), GFP_KERNEL);
+	state = kzalloc(sizeof(struct stv0299_state), GFP_KERNEL);
 	if (state == NULL) goto error;
 
 	/* setup the state */

drivers/media/dvb/frontends/tda10021.c

@@ -413,7 +413,7 @@ struct dvb_frontend* tda10021_attach(const struct tda1002x_config* config,
 	u8 id;
 
 	/* allocate memory for the internal state */
-	state = kmalloc(sizeof(struct tda10021_state), GFP_KERNEL);
+	state = kzalloc(sizeof(struct tda10021_state), GFP_KERNEL);
 	if (state == NULL) goto error;
 
 	/* setup the state */

drivers/media/dvb/frontends/tda10048.c

@@ -1095,7 +1095,7 @@ struct dvb_frontend *tda10048_attach(const struct tda10048_config *config,
 	dprintk(1, "%s()\n", __func__);
 
 	/* allocate memory for the internal state */
-	state = kmalloc(sizeof(struct tda10048_state), GFP_KERNEL);
+	state = kzalloc(sizeof(struct tda10048_state), GFP_KERNEL);
 	if (state == NULL)
 		goto error;
 

drivers/media/dvb/frontends/tda1004x.c

@@ -1269,7 +1269,7 @@ struct dvb_frontend* tda10045_attach(const struct tda1004x_config* config,
 	int id;
 
 	/* allocate memory for the internal state */
-	state = kmalloc(sizeof(struct tda1004x_state), GFP_KERNEL);
+	state = kzalloc(sizeof(struct tda1004x_state), GFP_KERNEL);
 	if (!state) {
 		printk(KERN_ERR "Can't alocate memory for tda10045 state\n");
 		return NULL;
@@ -1339,7 +1339,7 @@ struct dvb_frontend* tda10046_attach(const struct tda1004x_config* config,
 	int id;
 
 	/* allocate memory for the internal state */
-	state = kmalloc(sizeof(struct tda1004x_state), GFP_KERNEL);
+	state = kzalloc(sizeof(struct tda1004x_state), GFP_KERNEL);
 	if (!state) {
 		printk(KERN_ERR "Can't alocate memory for tda10046 state\n");
 		return NULL;

drivers/media/dvb/frontends/tda10086.c

@@ -745,7 +745,7 @@ struct dvb_frontend* tda10086_attach(const struct tda10086_config* config,
 	dprintk ("%s\n", __func__);
 
 	/* allocate memory for the internal state */
-	state = kmalloc(sizeof(struct tda10086_state), GFP_KERNEL);
+	state = kzalloc(sizeof(struct tda10086_state), GFP_KERNEL);
 	if (!state)
 		return NULL;
 

drivers/media/dvb/frontends/tda8083.c

@@ -417,7 +417,7 @@ struct dvb_frontend* tda8083_attach(const struct tda8083_config* config,
 	struct tda8083_state* state = NULL;
 
 	/* allocate memory for the internal state */
-	state = kmalloc(sizeof(struct tda8083_state), GFP_KERNEL);
+	state = kzalloc(sizeof(struct tda8083_state), GFP_KERNEL);
 	if (state == NULL) goto error;
 
 	/* setup the state */

drivers/media/dvb/frontends/ves1820.c

@@ -374,7 +374,7 @@ struct dvb_frontend* ves1820_attach(const struct ves1820_config* config,
 	struct ves1820_state* state = NULL;
 
 	/* allocate memory for the internal state */
-	state = kmalloc(sizeof(struct ves1820_state), GFP_KERNEL);
+	state = kzalloc(sizeof(struct ves1820_state), GFP_KERNEL);
 	if (state == NULL)
 		goto error;
 

drivers/media/dvb/frontends/ves1x93.c

@@ -456,7 +456,7 @@ struct dvb_frontend* ves1x93_attach(const struct ves1x93_config* config,
 	u8 identity;
 
 	/* allocate memory for the internal state */
-	state = kmalloc(sizeof(struct ves1x93_state), GFP_KERNEL);
+	state = kzalloc(sizeof(struct ves1x93_state), GFP_KERNEL);
 	if (state == NULL) goto error;
 
 	/* setup the state */

drivers/media/dvb/frontends/zl10353.c

@@ -98,7 +98,6 @@ static int zl10353_read_register(struct zl10353_state *state, u8 reg)
 static void zl10353_dump_regs(struct dvb_frontend *fe)
 {
 	struct zl10353_state *state = fe->demodulator_priv;
-	char buf[52], buf2[4];
 	int ret;
 	u8 reg;
 
@@ -106,19 +105,18 @@ static void zl10353_dump_regs(struct dvb_frontend *fe)
 	for (reg = 0; ; reg++) {
 		if (reg % 16 == 0) {
 			if (reg)
-				printk(KERN_DEBUG "%s\n", buf);
-			sprintf(buf, "%02x: ", reg);
+				printk(KERN_CONT "\n");
+			printk(KERN_DEBUG "%02x:", reg);
 		}
 		ret = zl10353_read_register(state, reg);
 		if (ret >= 0)
-			sprintf(buf2, "%02x ", (u8)ret);
+			printk(KERN_CONT " %02x", (u8)ret);
 		else
-			strcpy(buf2, "-- ");
-		strcat(buf, buf2);
+			printk(KERN_CONT " --");
 		if (reg == 0xff)
 			break;
 	}
-	printk(KERN_DEBUG "%s\n", buf);
+	printk(KERN_CONT "\n");
 }
 
 static void zl10353_calc_nominal_rate(struct dvb_frontend *fe,

drivers/media/dvb/siano/Kconfig

@@ -4,7 +4,7 @@
 
 config DVB_SIANO_SMS1XXX
 	tristate "Siano SMS1XXX USB dongle support"
-	depends on DVB_CORE && USB
+	depends on DVB_CORE && USB && INPUT
 	---help---
 	  Choose Y here if you have a USB dongle with a SMS1XXX chipset.
 

drivers/media/dvb/siano/sms-cards.c

@@ -116,99 +116,21 @@ static inline void sms_gpio_assign_11xx_default_led_config(
 
 int sms_board_event(struct smscore_device_t *coredev,
 		enum SMS_BOARD_EVENTS gevent) {
-	int board_id = smscore_get_board_id(coredev);
-	struct sms_board *board = sms_get_board(board_id);
 	struct smscore_gpio_config MyGpioConfig;
 
 	sms_gpio_assign_11xx_default_led_config(&MyGpioConfig);
 
 	switch (gevent) {
 	case BOARD_EVENT_POWER_INIT: /* including hotplug */
-		switch (board_id) {
-		case SMS1XXX_BOARD_HAUPPAUGE_WINDHAM:
-			/* set I/O and turn off all LEDs */
-			smscore_gpio_configure(coredev,
-					board->board_cfg.leds_power,
-					&MyGpioConfig);
-			smscore_gpio_set_level(coredev,
-					board->board_cfg.leds_power, 0);
-			smscore_gpio_configure(coredev, board->board_cfg.led0,
-					&MyGpioConfig);
-			smscore_gpio_set_level(coredev,
-					board->board_cfg.led0, 0);
-			smscore_gpio_configure(coredev, board->board_cfg.led1,
-					&MyGpioConfig);
-			smscore_gpio_set_level(coredev,
-					board->board_cfg.led1, 0);
-			break;
-		case SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD_R2:
-		case SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD:
-			/* set I/O and turn off LNA */
-			smscore_gpio_configure(coredev,
-					board->board_cfg.foreign_lna0_ctrl,
-					&MyGpioConfig);
-			smscore_gpio_set_level(coredev,
-					board->board_cfg.foreign_lna0_ctrl,
-					0);
-			break;
-		}
 		break; /* BOARD_EVENT_BIND */
 
 	case BOARD_EVENT_POWER_SUSPEND:
-		switch (board_id) {
-		case SMS1XXX_BOARD_HAUPPAUGE_WINDHAM:
-			smscore_gpio_set_level(coredev,
-						board->board_cfg.leds_power, 0);
-			smscore_gpio_set_level(coredev,
-						board->board_cfg.led0, 0);
-			smscore_gpio_set_level(coredev,
-						board->board_cfg.led1, 0);
-			break;
-		case SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD_R2:
-		case SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD:
-			smscore_gpio_set_level(coredev,
-					board->board_cfg.foreign_lna0_ctrl,
-					0);
-			break;
-		}
 		break; /* BOARD_EVENT_POWER_SUSPEND */
 
 	case BOARD_EVENT_POWER_RESUME:
-		switch (board_id) {
-		case SMS1XXX_BOARD_HAUPPAUGE_WINDHAM:
-			smscore_gpio_set_level(coredev,
-						board->board_cfg.leds_power, 1);
-			smscore_gpio_set_level(coredev,
-						board->board_cfg.led0, 1);
-			smscore_gpio_set_level(coredev,
-						board->board_cfg.led1, 0);
-			break;
-		case SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD_R2:
-		case SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD:
-			smscore_gpio_set_level(coredev,
-					board->board_cfg.foreign_lna0_ctrl,
-					1);
-			break;
-		}
 		break; /* BOARD_EVENT_POWER_RESUME */
 
 	case BOARD_EVENT_BIND:
-		switch (board_id) {
-		case SMS1XXX_BOARD_HAUPPAUGE_WINDHAM:
-			smscore_gpio_set_level(coredev,
-				board->board_cfg.leds_power, 1);
-			smscore_gpio_set_level(coredev,
-				board->board_cfg.led0, 1);
-			smscore_gpio_set_level(coredev,
-				board->board_cfg.led1, 0);
-			break;
-		case SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD_R2:
-		case SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD:
-			smscore_gpio_set_level(coredev,
-					board->board_cfg.foreign_lna0_ctrl,
-					1);
-			break;
-		}
 		break; /* BOARD_EVENT_BIND */
 
 	case BOARD_EVENT_SCAN_PROG:
@@ -218,20 +140,8 @@ int sms_board_event(struct smscore_device_t *coredev,
 	case BOARD_EVENT_EMERGENCY_WARNING_SIGNAL:
 		break; /* BOARD_EVENT_EMERGENCY_WARNING_SIGNAL */
 	case BOARD_EVENT_FE_LOCK:
-		switch (board_id) {
-		case SMS1XXX_BOARD_HAUPPAUGE_WINDHAM:
-			smscore_gpio_set_level(coredev,
-			board->board_cfg.led1, 1);
-			break;
-		}
 		break; /* BOARD_EVENT_FE_LOCK */
 	case BOARD_EVENT_FE_UNLOCK:
-		switch (board_id) {
-		case SMS1XXX_BOARD_HAUPPAUGE_WINDHAM:
-			smscore_gpio_set_level(coredev,
-						board->board_cfg.led1, 0);
-			break;
-		}
 		break; /* BOARD_EVENT_FE_UNLOCK */
 	case BOARD_EVENT_DEMOD_LOCK:
 		break; /* BOARD_EVENT_DEMOD_LOCK */
@@ -248,20 +158,8 @@ int sms_board_event(struct smscore_device_t *coredev,
 	case BOARD_EVENT_RECEPTION_LOST_0:
 		break; /* BOARD_EVENT_RECEPTION_LOST_0 */
 	case BOARD_EVENT_MULTIPLEX_OK:
-		switch (board_id) {
-		case SMS1XXX_BOARD_HAUPPAUGE_WINDHAM:
-			smscore_gpio_set_level(coredev,
-						board->board_cfg.led1, 1);
-			break;
-		}
 		break; /* BOARD_EVENT_MULTIPLEX_OK */
 	case BOARD_EVENT_MULTIPLEX_ERRORS:
-		switch (board_id) {
-		case SMS1XXX_BOARD_HAUPPAUGE_WINDHAM:
-			smscore_gpio_set_level(coredev,
-						board->board_cfg.led1, 0);
-			break;
-		}
 		break; /* BOARD_EVENT_MULTIPLEX_ERRORS */
 
 	default:

drivers/media/dvb/siano/smscoreapi.c

@@ -816,7 +816,7 @@ int smscore_set_device_mode(struct smscore_device_t *coredev, int mode)
 
 	sms_debug("set device mode to %d", mode);
 	if (coredev->device_flags & SMS_DEVICE_FAMILY2) {
-		if (mode < DEVICE_MODE_DVBT || mode > DEVICE_MODE_RAW_TUNER) {
+		if (mode < DEVICE_MODE_DVBT || mode >= DEVICE_MODE_RAW_TUNER) {
 			sms_err("invalid mode specified %d", mode);
 			return -EINVAL;
 		}

drivers/media/video/Kconfig

@@ -920,6 +920,8 @@ source "drivers/media/video/pwc/Kconfig"
 config USB_ZR364XX
 	tristate "USB ZR364XX Camera support"
 	depends on VIDEO_V4L2
+	select VIDEOBUF_GEN
+	select VIDEOBUF_VMALLOC
 	---help---
 	  Say Y here if you want to connect this type of camera to your
 	  computer's USB port.

drivers/media/video/bw-qcam.c

@@ -992,7 +992,7 @@ static int accept_bwqcam(struct parport *port)
 
 	if (parport[0] && strncmp(parport[0], "auto", 4) != 0) {
 		/* user gave parport parameters */
-		for(n=0; parport[n] && n<MAX_CAMS; n++){
+		for (n = 0; n < MAX_CAMS && parport[n]; n++) {
 			char *ep;
 			unsigned long r;
 			r = simple_strtoul(parport[n], &ep, 0);

drivers/media/video/cx18/cx18-controls.c

@@ -20,6 +20,7 @@
  *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
  *  02111-1307  USA
  */
+#include <linux/kernel.h>
 
 #include "cx18-driver.h"
 #include "cx18-cards.h"
@@ -317,7 +318,7 @@ int cx18_s_ext_ctrls(struct file *file, void *fh, struct v4l2_ext_controls *c)
 		idx = p.audio_properties & 0x03;
 		/* The audio clock of the digitizer must match the codec sample
 		   rate otherwise you get some very strange effects. */
-		if (idx < sizeof(freqs))
+		if (idx < ARRAY_SIZE(freqs))
 			cx18_call_all(cx, audio, s_clock_freq, freqs[idx]);
 		return err;
 	}

drivers/media/video/cx23885/cx23885-417.c

@@ -1715,6 +1715,8 @@ static struct video_device cx23885_mpeg_template = {
 	.fops          = &mpeg_fops,
 	.ioctl_ops     = &mpeg_ioctl_ops,
 	.minor         = -1,
+	.tvnorms       = CX23885_NORMS,
+	.current_norm  = V4L2_STD_NTSC_M,
 };
 
 void cx23885_417_unregister(struct cx23885_dev *dev)

drivers/media/video/cx88/cx88-cards.c

@@ -3003,6 +3003,14 @@ void cx88_setup_xc3028(struct cx88_core *core, struct xc2028_ctrl *ctl)
 	case CX88_BOARD_DVICO_FUSIONHDTV_5_PCI_NANO:
 		ctl->demod = XC3028_FE_OREN538;
 		break;
+	case CX88_BOARD_GENIATECH_X8000_MT:
+		/* FIXME: For this board, the xc3028 never recovers after being
+		   powered down (the reset GPIO probably is not set properly).
+		   We don't have access to the hardware so we cannot determine
+		   which GPIO is used for xc3028, so just disable power xc3028
+		   power management for now */
+		ctl->disable_power_mgmt = 1;
+		break;
 	case CX88_BOARD_WINFAST_TV2000_XP_GLOBAL:
 	case CX88_BOARD_PROLINK_PV_GLOBAL_XTREME:
 	case CX88_BOARD_PROLINK_PV_8000GT:

drivers/media/video/cx88/cx88-dvb.c

@@ -501,6 +501,7 @@ static struct zl10353_config cx88_pinnacle_hybrid_pctv = {
 static struct zl10353_config cx88_geniatech_x8000_mt = {
        .demod_address = (0x1e >> 1),
        .no_tuner = 1,
+       .disable_i2c_gate_ctrl = 1,
 };
 
 static struct s5h1411_config dvico_fusionhdtv7_config = {

drivers/media/video/cx88/cx88-mpeg.c

@@ -116,6 +116,10 @@ static int cx8802_start_dma(struct cx8802_dev    *dev,
 			udelay(100);
 			break;
 		case CX88_BOARD_HAUPPAUGE_HVR1300:
+			/* Enable MPEG parallel IO and video signal pins */
+			cx_write(MO_PINMUX_IO, 0x88);
+			cx_write(TS_SOP_STAT, 0);
+			cx_write(TS_VALERR_CNTRL, 0);
 			break;
 		case CX88_BOARD_PINNACLE_PCTV_HD_800i:
 			/* Enable MPEG parallel IO and video signal pins */

drivers/media/video/em28xx/em28xx-cards.c

@@ -218,7 +218,7 @@ static struct em28xx_reg_seq silvercrest_reg_seq[] = {
 struct em28xx_board em28xx_boards[] = {
 	[EM2750_BOARD_UNKNOWN] = {
 		.name          = "EM2710/EM2750/EM2751 webcam grabber",
-		.xclk          = EM28XX_XCLK_FREQUENCY_48MHZ,
+		.xclk          = EM28XX_XCLK_FREQUENCY_20MHZ,
 		.tuner_type    = TUNER_ABSENT,
 		.is_webcam     = 1,
 		.input         = { {
@@ -622,22 +622,27 @@ struct em28xx_board em28xx_boards[] = {
 	},
 	[EM2861_BOARD_PLEXTOR_PX_TV100U] = {
 		.name         = "Plextor ConvertX PX-TV100U",
-		.valid        = EM28XX_BOARD_NOT_VALIDATED,
 		.tuner_type   = TUNER_TNF_5335MF,
+		.xclk         = EM28XX_XCLK_I2S_MSB_TIMING |
+				EM28XX_XCLK_FREQUENCY_12MHZ,
 		.tda9887_conf = TDA9887_PRESENT,
 		.decoder      = EM28XX_TVP5150,
+		.has_msp34xx  = 1,
 		.input        = { {
 			.type     = EM28XX_VMUX_TELEVISION,
 			.vmux     = TVP5150_COMPOSITE0,
 			.amux     = EM28XX_AMUX_LINE_IN,
+			.gpio     = pinnacle_hybrid_pro_analog,
 		}, {
 			.type     = EM28XX_VMUX_COMPOSITE1,
 			.vmux     = TVP5150_COMPOSITE1,
 			.amux     = EM28XX_AMUX_LINE_IN,
+			.gpio     = pinnacle_hybrid_pro_analog,
 		}, {
 			.type     = EM28XX_VMUX_SVIDEO,
 			.vmux     = TVP5150_SVIDEO,
 			.amux     = EM28XX_AMUX_LINE_IN,
+			.gpio     = pinnacle_hybrid_pro_analog,
 		} },
 	},
 
@@ -1544,6 +1549,8 @@ struct usb_device_id em28xx_id_table[] = {
 			.driver_info = EM2750_BOARD_UNKNOWN },
 	{ USB_DEVICE(0xeb1a, 0x2800),
 			.driver_info = EM2800_BOARD_UNKNOWN },
+	{ USB_DEVICE(0xeb1a, 0x2710),
+			.driver_info = EM2820_BOARD_UNKNOWN },
 	{ USB_DEVICE(0xeb1a, 0x2820),
 			.driver_info = EM2820_BOARD_UNKNOWN },
 	{ USB_DEVICE(0xeb1a, 0x2821),
@@ -1761,6 +1768,7 @@ static int em28xx_hint_sensor(struct em28xx *dev)
 	__be16 version_be;
 	u16 version;
 
+	/* Micron sensor detection */
 	dev->i2c_client.addr = 0xba >> 1;
 	cmd = 0;
 	i2c_master_send(&dev->i2c_client, &cmd, 1);
@@ -1769,15 +1777,27 @@ static int em28xx_hint_sensor(struct em28xx *dev)
 		return -EINVAL;
 
 	version = be16_to_cpu(version_be);
-
 	switch (version) {
-	case 0x8243:		/* mt9v011 640x480 1.3 Mpix sensor */
+	case 0x8232:		/* mt9v011 640x480 1.3 Mpix sensor */
+	case 0x8243:		/* mt9v011 rev B 640x480 1.3 Mpix sensor */
 		dev->model = EM2820_BOARD_SILVERCREST_WEBCAM;
+		em28xx_set_model(dev);
+
 		sensor_name = "mt9v011";
 		dev->em28xx_sensor = EM28XX_MT9V011;
 		dev->sensor_xres = 640;
 		dev->sensor_yres = 480;
-		dev->sensor_xtal = 6300000;
+		/*
+		 * FIXME: mt9v011 uses I2S speed as xtal clk - at least with
+		 * the Silvercrest cam I have here for testing - for higher
+		 * resolutions, a high clock cause horizontal artifacts, so we
+		 * need to use a lower xclk frequency.
+		 * Yet, it would be possible to adjust xclk depending on the
+		 * desired resolution, since this affects directly the
+		 * frame rate.
+		 */
+		dev->board.xclk = EM28XX_XCLK_FREQUENCY_4_3MHZ;
+		dev->sensor_xtal = 4300000;
 
 		/* probably means GRGB 16 bit bayer */
 		dev->vinmode = 0x0d;
@@ -1786,6 +1806,8 @@ static int em28xx_hint_sensor(struct em28xx *dev)
 		break;
 	case 0x8431:
 		dev->model = EM2750_BOARD_UNKNOWN;
+		em28xx_set_model(dev);
+
 		sensor_name = "mt9m001";
 		dev->em28xx_sensor = EM28XX_MT9M001;
 		em28xx_initialize_mt9m001(dev);
@@ -1802,6 +1824,9 @@ static int em28xx_hint_sensor(struct em28xx *dev)
 		return -EINVAL;
 	}
 
+	/* Setup webcam defaults */
+	em28xx_pre_card_setup(dev);
+
 	em28xx_errdev("Sensor is %s, using model %s entry.\n",
 		      sensor_name, em28xx_boards[dev->model].name);
 
@@ -1813,60 +1838,6 @@ static int em28xx_hint_sensor(struct em28xx *dev)
  */
 void em28xx_pre_card_setup(struct em28xx *dev)
 {
-	int rc;
-
-	em28xx_set_model(dev);
-
-	em28xx_info("Identified as %s (card=%d)\n",
-		    dev->board.name, dev->model);
-
-	/* Set the default GPO/GPIO for legacy devices */
-	dev->reg_gpo_num = EM2880_R04_GPO;
-	dev->reg_gpio_num = EM28XX_R08_GPIO;
-
-	dev->wait_after_write = 5;
-
-	/* Based on the Chip ID, set the device configuration */
-	rc = em28xx_read_reg(dev, EM28XX_R0A_CHIPID);
-	if (rc > 0) {
-		dev->chip_id = rc;
-
-		switch (dev->chip_id) {
-		case CHIP_ID_EM2750:
-			em28xx_info("chip ID is em2750\n");
-			break;
-		case CHIP_ID_EM2820:
-			em28xx_info("chip ID is em2710 or em2820\n");
-			break;
-		case CHIP_ID_EM2840:
-			em28xx_info("chip ID is em2840\n");
-			break;
-		case CHIP_ID_EM2860:
-			em28xx_info("chip ID is em2860\n");
-			break;
-		case CHIP_ID_EM2870:
-			em28xx_info("chip ID is em2870\n");
-			dev->wait_after_write = 0;
-			break;
-		case CHIP_ID_EM2874:
-			em28xx_info("chip ID is em2874\n");
-			dev->reg_gpio_num = EM2874_R80_GPIO;
-			dev->wait_after_write = 0;
-			break;
-		case CHIP_ID_EM2883:
-			em28xx_info("chip ID is em2882/em2883\n");
-			dev->wait_after_write = 0;
-			break;
-		default:
-			em28xx_info("em28xx chip ID = %d\n", dev->chip_id);
-		}
-	}
-
-	/* Prepopulate cached GPO register content */
-	rc = em28xx_read_reg(dev, dev->reg_gpo_num);
-	if (rc >= 0)
-		dev->reg_gpo = rc;
-
 	/* Set the initial XCLK and I2C clock values based on the board
 	   definition */
 	em28xx_write_reg(dev, EM28XX_R0F_XCLK, dev->board.xclk & 0x7f);
@@ -1876,9 +1847,8 @@ void em28xx_pre_card_setup(struct em28xx *dev)
 	/* request some modules */
 	switch (dev->model) {
 	case EM2861_BOARD_PLEXTOR_PX_TV100U:
-		/* FIXME guess */
-		/* Turn on analog audio output */
-		em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfd);
+		/* Sets the msp34xx I2S speed */
+		dev->i2s_speed = 2048000;
 		break;
 	case EM2861_BOARD_KWORLD_PVRTV_300U:
 	case EM2880_BOARD_KWORLD_DVB_305U:
@@ -2216,7 +2186,20 @@ void em28xx_register_i2c_ir(struct em28xx *dev)
 
 void em28xx_card_setup(struct em28xx *dev)
 {
-	em28xx_set_model(dev);
+	/*
+	 * If the device can be a webcam, seek for a sensor.
+	 * If sensor is not found, then it isn't a webcam.
+	 */
+	if (dev->board.is_webcam) {
+		if (em28xx_hint_sensor(dev) < 0)
+			dev->board.is_webcam = 0;
+		else
+			dev->progressive = 1;
+	} else
+		em28xx_set_model(dev);
+
+	em28xx_info("Identified as %s (card=%d)\n",
+		    dev->board.name, dev->model);
 
 	dev->tuner_type = em28xx_boards[dev->model].tuner_type;
 	if (em28xx_boards[dev->model].tuner_addr)
@@ -2290,10 +2273,6 @@ void em28xx_card_setup(struct em28xx *dev)
 		em28xx_gpio_set(dev, dev->board.tuner_gpio);
 		em28xx_set_mode(dev, EM28XX_ANALOG_MODE);
 		break;
-	case EM2820_BOARD_SILVERCREST_WEBCAM:
-		/* FIXME: need to document the registers bellow */
-		em28xx_write_reg(dev, 0x0d, 0x42);
-		em28xx_write_reg(dev, 0x13, 0x08);
 	}
 
 	if (dev->board.has_snapshot_button)
@@ -2433,7 +2412,7 @@ static int em28xx_init_dev(struct em28xx **devhandle, struct usb_device *udev,
 			   int minor)
 {
 	struct em28xx *dev = *devhandle;
-	int retval = -ENOMEM;
+	int retval;
 	int errCode;
 
 	dev->udev = udev;
@@ -2450,6 +2429,58 @@ static int em28xx_init_dev(struct em28xx **devhandle, struct usb_device *udev,
 	dev->em28xx_read_reg_req = em28xx_read_reg_req;
 	dev->board.is_em2800 = em28xx_boards[dev->model].is_em2800;
 
+	em28xx_set_model(dev);
+
+	/* Set the default GPO/GPIO for legacy devices */
+	dev->reg_gpo_num = EM2880_R04_GPO;
+	dev->reg_gpio_num = EM28XX_R08_GPIO;
+
+	dev->wait_after_write = 5;
+
+	/* Based on the Chip ID, set the device configuration */
+	retval = em28xx_read_reg(dev, EM28XX_R0A_CHIPID);
+	if (retval > 0) {
+		dev->chip_id = retval;
+
+		switch (dev->chip_id) {
+		case CHIP_ID_EM2710:
+			em28xx_info("chip ID is em2710\n");
+			break;
+		case CHIP_ID_EM2750:
+			em28xx_info("chip ID is em2750\n");
+			break;
+		case CHIP_ID_EM2820:
+			em28xx_info("chip ID is em2820 (or em2710)\n");
+			break;
+		case CHIP_ID_EM2840:
+			em28xx_info("chip ID is em2840\n");
+			break;
+		case CHIP_ID_EM2860:
+			em28xx_info("chip ID is em2860\n");
+			break;
+		case CHIP_ID_EM2870:
+			em28xx_info("chip ID is em2870\n");
+			dev->wait_after_write = 0;
+			break;
+		case CHIP_ID_EM2874:
+			em28xx_info("chip ID is em2874\n");
+			dev->reg_gpio_num = EM2874_R80_GPIO;
+			dev->wait_after_write = 0;
+			break;
+		case CHIP_ID_EM2883:
+			em28xx_info("chip ID is em2882/em2883\n");
+			dev->wait_after_write = 0;
+			break;
+		default:
+			em28xx_info("em28xx chip ID = %d\n", dev->chip_id);
+		}
+	}
+
+	/* Prepopulate cached GPO register content */
+	retval = em28xx_read_reg(dev, dev->reg_gpo_num);
+	if (retval >= 0)
+		dev->reg_gpo = retval;
+
 	em28xx_pre_card_setup(dev);
 
 	if (!dev->board.is_em2800) {
@@ -2484,14 +2515,6 @@ static int em28xx_init_dev(struct em28xx **devhandle, struct usb_device *udev,
 	dev->vinmode = 0x10;
 	dev->vinctl  = 0x11;
 
-	/*
-	 * If the device can be a webcam, seek for a sensor.
-	 * If sensor is not found, then it isn't a webcam.
-	 */
-	if (dev->board.is_webcam)
-		if (em28xx_hint_sensor(dev) < 0)
-			dev->board.is_webcam = 0;
-
 	/* Do board specific init and eeprom reading */
 	em28xx_card_setup(dev);
 

drivers/media/video/em28xx/em28xx-core.c

@@ -632,6 +632,9 @@ int em28xx_capture_start(struct em28xx *dev, int start)
 		return rc;
 	}
 
+	if (dev->board.is_webcam)
+		rc = em28xx_write_reg(dev, 0x13, 0x0c);
+
 	/* enable video capture */
 	rc = em28xx_write_reg(dev, 0x48, 0x00);
 
@@ -720,7 +723,10 @@ int em28xx_resolution_set(struct em28xx *dev)
 {
 	int width, height;
 	width = norm_maxw(dev);
-	height = norm_maxh(dev) >> 1;
+	height = norm_maxh(dev);
+
+	if (!dev->progressive)
+		height >>= norm_maxh(dev);
 
 	em28xx_set_outfmt(dev);
 

drivers/media/video/em28xx/em28xx-dvb.c

@@ -478,7 +478,6 @@ static int dvb_init(struct em28xx *dev)
 		}
 		break;
 	case EM2880_BOARD_KWORLD_DVB_310U:
-	case EM2880_BOARD_EMPIRE_DUAL_TV:
 		dvb->frontend = dvb_attach(zl10353_attach,
 					   &em28xx_zl10353_with_xc3028,
 					   &dev->i2c_adap);
@@ -488,6 +487,7 @@ static int dvb_init(struct em28xx *dev)
 		}
 		break;
 	case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900:
+	case EM2880_BOARD_EMPIRE_DUAL_TV:
 		dvb->frontend = dvb_attach(zl10353_attach,
 					   &em28xx_zl10353_xc3028_no_i2c_gate,
 					   &dev->i2c_adap);

drivers/media/video/em28xx/em28xx-reg.h

@@ -176,7 +176,8 @@
 
 /* FIXME: Need to be populated with the other chip ID's */
 enum em28xx_chip_id {
-	CHIP_ID_EM2820 = 18,	/* Also used by em2710 */
+	CHIP_ID_EM2710 = 17,
+	CHIP_ID_EM2820 = 18,	/* Also used by some em2710 */
 	CHIP_ID_EM2840 = 20,
 	CHIP_ID_EM2750 = 33,
 	CHIP_ID_EM2860 = 34,

drivers/media/video/em28xx/em28xx-video.c

@@ -194,15 +194,24 @@ static void em28xx_copy_video(struct em28xx *dev,
 	startread = p;
 	remain = len;
 
-	/* Interlaces frame */
-	if (buf->top_field)
+	if (dev->progressive)
 		fieldstart = outp;
-	else
-		fieldstart = outp + bytesperline;
+	else {
+		/* Interlaces two half frames */
+		if (buf->top_field)
+			fieldstart = outp;
+		else
+			fieldstart = outp + bytesperline;
+	}
 
 	linesdone = dma_q->pos / bytesperline;
 	currlinedone = dma_q->pos % bytesperline;
-	offset = linesdone * bytesperline * 2 + currlinedone;
+
+	if (dev->progressive)
+		offset = linesdone * bytesperline + currlinedone;
+	else
+		offset = linesdone * bytesperline * 2 + currlinedone;
+
 	startwrite = fieldstart + offset;
 	lencopy = bytesperline - currlinedone;
 	lencopy = lencopy > remain ? remain : lencopy;
@@ -376,7 +385,7 @@ static inline int em28xx_isoc_copy(struct em28xx *dev, struct urb *urb)
 			em28xx_isocdbg("Video frame %d, length=%i, %s\n", p[2],
 				       len, (p[2] & 1) ? "odd" : "even");
 
-			if (!(p[2] & 1)) {
+			if (dev->progressive || !(p[2] & 1)) {
 				if (buf != NULL)
 					buffer_filled(dev, dma_q, buf);
 				get_next_buf(dma_q, &buf);
@@ -689,7 +698,10 @@ static int vidioc_g_fmt_vid_cap(struct file *file, void *priv,
 	f->fmt.pix.colorspace = V4L2_COLORSPACE_SMPTE170M;
 
 	/* FIXME: TOP? NONE? BOTTOM? ALTENATE? */
-	f->fmt.pix.field = dev->interlaced ?
+	if (dev->progressive)
+		f->fmt.pix.field = V4L2_FIELD_NONE;
+	else
+		f->fmt.pix.field = dev->interlaced ?
 			   V4L2_FIELD_INTERLACED : V4L2_FIELD_TOP;
 
 	mutex_unlock(&dev->lock);
@@ -753,7 +765,11 @@ static int vidioc_try_fmt_vid_cap(struct file *file, void *priv,
 	f->fmt.pix.bytesperline = (dev->width * fmt->depth + 7) >> 3;
 	f->fmt.pix.sizeimage = f->fmt.pix.bytesperline * height;
 	f->fmt.pix.colorspace = V4L2_COLORSPACE_SMPTE170M;
-	f->fmt.pix.field = V4L2_FIELD_INTERLACED;
+	if (dev->progressive)
+		f->fmt.pix.field = V4L2_FIELD_NONE;
+	else
+		f->fmt.pix.field = dev->interlaced ?
+			   V4L2_FIELD_INTERLACED : V4L2_FIELD_TOP;
 
 	return 0;
 }
@@ -846,6 +862,41 @@ static int vidioc_s_std(struct file *file, void *priv, v4l2_std_id *norm)
 	return 0;
 }
 
+static int vidioc_g_parm(struct file *file, void *priv,
+			 struct v4l2_streamparm *p)
+{
+	struct em28xx_fh   *fh  = priv;
+	struct em28xx      *dev = fh->dev;
+	int rc = 0;
+
+	if (p->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+		return -EINVAL;
+
+	if (dev->board.is_webcam)
+		rc = v4l2_device_call_until_err(&dev->v4l2_dev, 0,
+						video, g_parm, p);
+	else
+		v4l2_video_std_frame_period(dev->norm,
+						 &p->parm.capture.timeperframe);
+
+	return rc;
+}
+
+static int vidioc_s_parm(struct file *file, void *priv,
+			 struct v4l2_streamparm *p)
+{
+	struct em28xx_fh   *fh  = priv;
+	struct em28xx      *dev = fh->dev;
+
+	if (!dev->board.is_webcam)
+		return -EINVAL;
+
+	if (p->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+		return -EINVAL;
+
+	return v4l2_device_call_until_err(&dev->v4l2_dev, 0, video, s_parm, p);
+}
+
 static const char *iname[] = {
 	[EM28XX_VMUX_COMPOSITE1] = "Composite1",
 	[EM28XX_VMUX_COMPOSITE2] = "Composite2",
@@ -1624,6 +1675,7 @@ static int em28xx_v4l2_open(struct file *filp)
 	struct em28xx *dev;
 	enum v4l2_buf_type fh_type;
 	struct em28xx_fh *fh;
+	enum v4l2_field field;
 
 	dev = em28xx_get_device(minor, &fh_type, &radio);
 
@@ -1665,8 +1717,13 @@ static int em28xx_v4l2_open(struct file *filp)
 
 	dev->users++;
 
+	if (dev->progressive)
+		field = V4L2_FIELD_NONE;
+	else
+		field = V4L2_FIELD_INTERLACED;
+
 	videobuf_queue_vmalloc_init(&fh->vb_vidq, &em28xx_video_qops,
-			NULL, &dev->slock, fh->type, V4L2_FIELD_INTERLACED,
+			NULL, &dev->slock, fh->type, field,
 			sizeof(struct em28xx_buffer), fh);
 
 	mutex_unlock(&dev->lock);
@@ -1885,6 +1942,8 @@ static const struct v4l2_ioctl_ops video_ioctl_ops = {
 	.vidioc_qbuf                = vidioc_qbuf,
 	.vidioc_dqbuf               = vidioc_dqbuf,
 	.vidioc_s_std               = vidioc_s_std,
+	.vidioc_g_parm		    = vidioc_g_parm,
+	.vidioc_s_parm		    = vidioc_s_parm,
 	.vidioc_enum_input          = vidioc_enum_input,
 	.vidioc_g_input             = vidioc_g_input,
 	.vidioc_s_input             = vidioc_s_input,

drivers/media/video/em28xx/em28xx.h

@@ -484,6 +484,9 @@ struct em28xx {
 	int sensor_xres, sensor_yres;
 	int sensor_xtal;
 
+	/* Allows progressive (e. g. non-interlaced) mode */
+	int progressive;
+
 	/* Vinmode/Vinctl used at the driver */
 	int vinmode, vinctl;
 

drivers/media/video/hdpvr/hdpvr-video.c

@@ -1220,6 +1220,8 @@ static const struct video_device hdpvr_video_template = {
 		V4L2_STD_PAL_G | V4L2_STD_PAL_H | V4L2_STD_PAL_I |
 		V4L2_STD_PAL_D | V4L2_STD_PAL_M | V4L2_STD_PAL_N |
 		V4L2_STD_PAL_60,
+	.current_norm 		= V4L2_STD_NTSC | V4L2_STD_PAL_M |
+		V4L2_STD_PAL_60,
 };
 
 int hdpvr_register_videodev(struct hdpvr_device *dev, struct device *parent,

drivers/media/video/ivtv/ivtv-controls.c

@@ -17,6 +17,7 @@
     along with this program; if not, write to the Free Software
     Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
+#include <linux/kernel.h>
 
 #include "ivtv-driver.h"
 #include "ivtv-cards.h"
@@ -281,7 +282,7 @@ int ivtv_s_ext_ctrls(struct file *file, void *fh, struct v4l2_ext_controls *c)
 		idx = p.audio_properties & 0x03;
 		/* The audio clock of the digitizer must match the codec sample
 		   rate otherwise you get some very strange effects. */
-		if (idx < sizeof(freqs))
+		if (idx < ARRAY_SIZE(freqs))
 			ivtv_call_all(itv, audio, s_clock_freq, freqs[idx]);
 		return err;
 	}

drivers/media/video/mt9v011.c

@@ -52,13 +52,34 @@ static struct v4l2_queryctrl mt9v011_qctrl[] = {
 		.step = 1,
 		.default_value = 0,
 		.flags = 0,
-	},
+	}, {
+		.id      = V4L2_CID_HFLIP,
+		.type    = V4L2_CTRL_TYPE_BOOLEAN,
+		.name    = "Mirror",
+		.minimum = 0,
+		.maximum = 1,
+		.step    = 1,
+		.default_value = 0,
+		.flags = 0,
+	}, {
+		.id      = V4L2_CID_VFLIP,
+		.type    = V4L2_CTRL_TYPE_BOOLEAN,
+		.name    = "Vflip",
+		.minimum = 0,
+		.maximum = 1,
+		.step    = 1,
+		.default_value = 0,
+		.flags = 0,
+	}, {
+	}
 };
 
 struct mt9v011 {
 	struct v4l2_subdev sd;
 	unsigned width, height;
 	unsigned xtal;
+	unsigned hflip:1;
+	unsigned vflip:1;
 
 	u16 global_gain, red_bal, blue_bal;
 };
@@ -131,7 +152,6 @@ static const struct i2c_reg_value mt9v011_init_default[] = {
 
 		{ R0A_MT9V011_CLK_SPEED, 0x0000 },
 		{ R1E_MT9V011_DIGITAL_ZOOM,  0x0000 },
-		{ R20_MT9V011_READ_MODE, 0x1000 },
 
 		{ R07_MT9V011_OUT_CTRL, 0x0002 },	/* chip enable */
 };
@@ -156,7 +176,7 @@ static void set_balance(struct v4l2_subdev *sd)
 	mt9v011_write(sd, R2D_MT9V011_RED_GAIN, red_gain);
 }
 
-static void calc_fps(struct v4l2_subdev *sd)
+static void calc_fps(struct v4l2_subdev *sd, u32 *numerator, u32 *denominator)
 {
 	struct mt9v011 *core = to_mt9v011(sd);
 	unsigned height, width, hblank, vblank, speed;
@@ -179,6 +199,51 @@ static void calc_fps(struct v4l2_subdev *sd)
 
 	v4l2_dbg(1, debug, sd, "Programmed to %u.%03u fps (%d pixel clcks)\n",
 		tmp / 1000, tmp % 1000, t_time);
+
+	if (numerator && denominator) {
+		*numerator = 1000;
+		*denominator = (u32)frames_per_ms;
+	}
+}
+
+static u16 calc_speed(struct v4l2_subdev *sd, u32 numerator, u32 denominator)
+{
+	struct mt9v011 *core = to_mt9v011(sd);
+	unsigned height, width, hblank, vblank;
+	unsigned row_time, line_time;
+	u64 t_time, speed;
+
+	/* Avoid bogus calculus */
+	if (!numerator || !denominator)
+		return 0;
+
+	height = mt9v011_read(sd, R03_MT9V011_HEIGHT);
+	width = mt9v011_read(sd, R04_MT9V011_WIDTH);
+	hblank = mt9v011_read(sd, R05_MT9V011_HBLANK);
+	vblank = mt9v011_read(sd, R06_MT9V011_VBLANK);
+
+	row_time = width + 113 + hblank;
+	line_time = height + vblank + 1;
+
+	t_time = core->xtal * ((u64)numerator);
+	/* round to the closest value */
+	t_time += denominator / 2;
+	do_div(t_time, denominator);
+
+	speed = t_time;
+	do_div(speed, row_time * line_time);
+
+	/* Avoid having a negative value for speed */
+	if (speed < 2)
+		speed = 0;
+	else
+		speed -= 2;
+
+	/* Avoid speed overflow */
+	if (speed > 15)
+		return 15;
+
+	return (u16)speed;
 }
 
 static void set_res(struct v4l2_subdev *sd)
@@ -207,9 +272,23 @@ static void set_res(struct v4l2_subdev *sd)
 	mt9v011_write(sd, R03_MT9V011_HEIGHT, core->height);
 	mt9v011_write(sd, R06_MT9V011_VBLANK, 508 - core->height);
 
-	calc_fps(sd);
+	calc_fps(sd, NULL, NULL);
 };
 
+static void set_read_mode(struct v4l2_subdev *sd)
+{
+	struct mt9v011 *core = to_mt9v011(sd);
+	unsigned mode = 0x1000;
+
+	if (core->hflip)
+		mode |= 0x4000;
+
+	if (core->vflip)
+		mode |= 0x8000;
+
+	mt9v011_write(sd, R20_MT9V011_READ_MODE, mode);
+}
+
 static int mt9v011_reset(struct v4l2_subdev *sd, u32 val)
 {
 	int i;
@@ -220,6 +299,7 @@ static int mt9v011_reset(struct v4l2_subdev *sd, u32 val)
 
 	set_balance(sd);
 	set_res(sd);
+	set_read_mode(sd);
 
 	return 0;
 };
@@ -240,6 +320,12 @@ static int mt9v011_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
 	case V4L2_CID_BLUE_BALANCE:
 		ctrl->value = core->blue_bal;
 		return 0;
+	case V4L2_CID_HFLIP:
+		ctrl->value = core->hflip ? 1 : 0;
+		return 0;
+	case V4L2_CID_VFLIP:
+		ctrl->value = core->vflip ? 1 : 0;
+		return 0;
 	}
 	return -EINVAL;
 }
@@ -288,6 +374,14 @@ static int mt9v011_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
 	case V4L2_CID_BLUE_BALANCE:
 		core->blue_bal = ctrl->value;
 		break;
+	case V4L2_CID_HFLIP:
+		core->hflip = ctrl->value;
+		set_read_mode(sd);
+		return 0;
+	case V4L2_CID_VFLIP:
+		core->vflip = ctrl->value;
+		set_read_mode(sd);
+		return 0;
 	default:
 		return -EINVAL;
 	}
@@ -322,6 +416,44 @@ static int mt9v011_try_fmt(struct v4l2_subdev *sd, struct v4l2_format *fmt)
 	return 0;
 }
 
+static int mt9v011_g_parm(struct v4l2_subdev *sd, struct v4l2_streamparm *parms)
+{
+	struct v4l2_captureparm *cp = &parms->parm.capture;
+
+	if (parms->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+		return -EINVAL;
+
+	memset(cp, 0, sizeof(struct v4l2_captureparm));
+	cp->capability = V4L2_CAP_TIMEPERFRAME;
+	calc_fps(sd,
+		 &cp->timeperframe.numerator,
+		 &cp->timeperframe.denominator);
+
+	return 0;
+}
+
+static int mt9v011_s_parm(struct v4l2_subdev *sd, struct v4l2_streamparm *parms)
+{
+	struct v4l2_captureparm *cp = &parms->parm.capture;
+	struct v4l2_fract *tpf = &cp->timeperframe;
+	u16 speed;
+
+	if (parms->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+		return -EINVAL;
+	if (cp->extendedmode != 0)
+		return -EINVAL;
+
+	speed = calc_speed(sd, tpf->numerator, tpf->denominator);
+
+	mt9v011_write(sd, R0A_MT9V011_CLK_SPEED, speed);
+	v4l2_dbg(1, debug, sd, "Setting speed to %d\n", speed);
+
+	/* Recalculate and update fps info */
+	calc_fps(sd, &tpf->numerator, &tpf->denominator);
+
+	return 0;
+}
+
 static int mt9v011_s_fmt(struct v4l2_subdev *sd, struct v4l2_format *fmt)
 {
 	struct v4l2_pix_format *pix = &fmt->fmt.pix;
@@ -393,10 +525,13 @@ static int mt9v011_s_register(struct v4l2_subdev *sd,
 static int mt9v011_g_chip_ident(struct v4l2_subdev *sd,
 				struct v4l2_dbg_chip_ident *chip)
 {
+	u16 version;
 	struct i2c_client *client = v4l2_get_subdevdata(sd);
 
+	version = mt9v011_read(sd, R00_MT9V011_CHIP_VERSION);
+
 	return v4l2_chip_ident_i2c_client(client, chip, V4L2_IDENT_MT9V011,
-					  MT9V011_VERSION);
+					  version);
 }
 
 static const struct v4l2_subdev_core_ops mt9v011_core_ops = {
@@ -416,6 +551,8 @@ static const struct v4l2_subdev_video_ops mt9v011_video_ops = {
 	.enum_fmt = mt9v011_enum_fmt,
 	.try_fmt = mt9v011_try_fmt,
 	.s_fmt = mt9v011_s_fmt,
+	.g_parm = mt9v011_g_parm,
+	.s_parm = mt9v011_s_parm,
 };
 
 static const struct v4l2_subdev_ops mt9v011_ops = {
@@ -449,8 +586,9 @@ static int mt9v011_probe(struct i2c_client *c,
 
 	/* Check if the sensor is really a MT9V011 */
 	version = mt9v011_read(sd, R00_MT9V011_CHIP_VERSION);
-	if (version != MT9V011_VERSION) {
-		v4l2_info(sd, "*** unknown micron chip detected (0x%04x.\n",
+	if ((version != MT9V011_VERSION) &&
+	    (version != MT9V011_REV_B_VERSION)) {
+		v4l2_info(sd, "*** unknown micron chip detected (0x%04x).\n",
 			  version);
 		kfree(core);
 		return -EINVAL;
@@ -461,8 +599,8 @@ static int mt9v011_probe(struct i2c_client *c,
 	core->height = 480;
 	core->xtal = 27000000;	/* Hz */
 
-	v4l_info(c, "chip found @ 0x%02x (%s)\n",
-		 c->addr << 1, c->adapter->name);
+	v4l_info(c, "chip found @ 0x%02x (%s - chip version 0x%04x)\n",
+		 c->addr << 1, c->adapter->name, version);
 
 	return 0;
 }

drivers/media/video/mt9v011.h

@@ -30,6 +30,7 @@
 #define R35_MT9V011_GLOBAL_GAIN		0x35
 #define RF1_MT9V011_CHIP_ENABLE		0xf1
 
-#define MT9V011_VERSION			0x8243
+#define MT9V011_VERSION			0x8232
+#define MT9V011_REV_B_VERSION		0x8243
 
 #endif

drivers/media/video/mx1_camera.c

@@ -234,6 +234,7 @@ static int mx1_camera_setup_dma(struct mx1_camera_dev *pcdev)
 	return ret;
 }
 
+/* Called under spinlock_irqsave(&pcdev->lock, ...) */
 static void mx1_videobuf_queue(struct videobuf_queue *vq,
 						struct videobuf_buffer *vb)
 {
@@ -241,13 +242,10 @@ static void mx1_videobuf_queue(struct videobuf_queue *vq,
 	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
 	struct mx1_camera_dev *pcdev = ici->priv;
 	struct mx1_buffer *buf = container_of(vb, struct mx1_buffer, vb);
-	unsigned long flags;
 
 	dev_dbg(&icd->dev, "%s (vb=0x%p) 0x%08lx %d\n", __func__,
 		vb, vb->baddr, vb->bsize);
 
-	spin_lock_irqsave(&pcdev->lock, flags);
-
 	list_add_tail(&vb->queue, &pcdev->capture);
 
 	vb->state = VIDEOBUF_ACTIVE;
@@ -264,8 +262,6 @@ static void mx1_videobuf_queue(struct videobuf_queue *vq,
 			__raw_writel(temp, pcdev->base + CSICR1);
 		}
 	}
-
-	spin_unlock_irqrestore(&pcdev->lock, flags);
 }
 
 static void mx1_videobuf_release(struct videobuf_queue *vq,

drivers/media/video/mx3_camera.c

@@ -332,7 +332,10 @@ static enum pixel_fmt fourcc_to_ipu_pix(__u32 fourcc)
 	}
 }
 
-/* Called with .vb_lock held */
+/*
+ * Called with .vb_lock mutex held and
+ * under spinlock_irqsave(&mx3_cam->lock, ...)
+ */
 static void mx3_videobuf_queue(struct videobuf_queue *vq,
 			       struct videobuf_buffer *vb)
 {
@@ -346,7 +349,8 @@ static void mx3_videobuf_queue(struct videobuf_queue *vq,
 	struct idmac_video_param *video = &ichan->params.video;
 	const struct soc_camera_data_format *data_fmt = icd->current_fmt;
 	dma_cookie_t cookie;
-	unsigned long flags;
+
+	BUG_ON(!irqs_disabled());
 
 	/* This is the configuration of one sg-element */
 	video->out_pixel_fmt	= fourcc_to_ipu_pix(data_fmt->fourcc);
@@ -359,8 +363,6 @@ static void mx3_videobuf_queue(struct videobuf_queue *vq,
 	memset((void *)vb->baddr, 0xaa, vb->bsize);
 #endif
 
-	spin_lock_irqsave(&mx3_cam->lock, flags);
-
 	list_add_tail(&vb->queue, &mx3_cam->capture);
 
 	if (!mx3_cam->active) {
@@ -370,24 +372,23 @@ static void mx3_videobuf_queue(struct videobuf_queue *vq,
 		vb->state = VIDEOBUF_QUEUED;
 	}
 
-	spin_unlock_irqrestore(&mx3_cam->lock, flags);
+	spin_unlock_irq(&mx3_cam->lock);
 
 	cookie = txd->tx_submit(txd);
 	dev_dbg(&icd->dev, "Submitted cookie %d DMA 0x%08x\n", cookie, sg_dma_address(&buf->sg));
+
+	spin_lock_irq(&mx3_cam->lock);
+
 	if (cookie >= 0)
 		return;
 
 	/* Submit error */
 	vb->state = VIDEOBUF_PREPARED;
 
-	spin_lock_irqsave(&mx3_cam->lock, flags);
-
 	list_del_init(&vb->queue);
 
 	if (mx3_cam->active == buf)
 		mx3_cam->active = NULL;
-
-	spin_unlock_irqrestore(&mx3_cam->lock, flags);
 }
 
 /* Called with .vb_lock held */

drivers/media/video/pxa_camera.c

@@ -612,6 +612,7 @@ static void pxa_camera_stop_capture(struct pxa_camera_dev *pcdev)
 	dev_dbg(pcdev->soc_host.dev, "%s\n", __func__);
 }
 
+/* Called under spinlock_irqsave(&pcdev->lock, ...) */
 static void pxa_videobuf_queue(struct videobuf_queue *vq,
 			       struct videobuf_buffer *vb)
 {
@@ -619,13 +620,10 @@ static void pxa_videobuf_queue(struct videobuf_queue *vq,
 	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
 	struct pxa_camera_dev *pcdev = ici->priv;
 	struct pxa_buffer *buf = container_of(vb, struct pxa_buffer, vb);
-	unsigned long flags;
 
 	dev_dbg(&icd->dev, "%s (vb=0x%p) 0x%08lx %d active=%p\n", __func__,
 		vb, vb->baddr, vb->bsize, pcdev->active);
 
-	spin_lock_irqsave(&pcdev->lock, flags);
-
 	list_add_tail(&vb->queue, &pcdev->capture);
 
 	vb->state = VIDEOBUF_ACTIVE;
@@ -633,8 +631,6 @@ static void pxa_videobuf_queue(struct videobuf_queue *vq,
 
 	if (!pcdev->active)
 		pxa_camera_start_capture(pcdev);
-
-	spin_unlock_irqrestore(&pcdev->lock, flags);
 }
 
 static void pxa_videobuf_release(struct videobuf_queue *vq,
@@ -1579,6 +1575,7 @@ static int __devinit pxa_camera_probe(struct platform_device *pdev)
 		pcdev->mclk = 20000000;
 	}
 
+	pcdev->soc_host.dev = &pdev->dev;
 	pcdev->mclk_divisor = mclk_get_divisor(pcdev);
 
 	INIT_LIST_HEAD(&pcdev->capture);
@@ -1644,7 +1641,6 @@ static int __devinit pxa_camera_probe(struct platform_device *pdev)
 	pcdev->soc_host.drv_name	= PXA_CAM_DRV_NAME;
 	pcdev->soc_host.ops		= &pxa_soc_camera_host_ops;
 	pcdev->soc_host.priv		= pcdev;
-	pcdev->soc_host.dev		= &pdev->dev;
 	pcdev->soc_host.nr		= pdev->id;
 
 	err = soc_camera_host_register(&pcdev->soc_host);

drivers/media/video/saa7134/saa7134-cards.c

@@ -3331,8 +3331,8 @@ struct saa7134_board saa7134_boards[] = {
 			.gpio = 0x0200100,
 		},
 	},
-	[SAA7134_BOARD_HAUPPAUGE_HVR1120] = {
-		.name           = "Hauppauge WinTV-HVR1120 ATSC/QAM-Hybrid",
+	[SAA7134_BOARD_HAUPPAUGE_HVR1150] = {
+		.name           = "Hauppauge WinTV-HVR1150 ATSC/QAM-Hybrid",
 		.audio_clock    = 0x00187de7,
 		.tuner_type     = TUNER_PHILIPS_TDA8290,
 		.radio_type     = UNSET,
@@ -3363,8 +3363,8 @@ struct saa7134_board saa7134_boards[] = {
 			.gpio = 0x0800100, /* GPIO 23 HI for FM */
 		},
 	},
-	[SAA7134_BOARD_HAUPPAUGE_HVR1110R3] = {
-		.name           = "Hauppauge WinTV-HVR1110r3 DVB-T/Hybrid",
+	[SAA7134_BOARD_HAUPPAUGE_HVR1120] = {
+		.name           = "Hauppauge WinTV-HVR1120 DVB-T/Hybrid",
 		.audio_clock    = 0x00187de7,
 		.tuner_type     = TUNER_PHILIPS_TDA8290,
 		.radio_type     = UNSET,
@@ -5862,31 +5862,31 @@ struct pci_device_id saa7134_pci_tbl[] = {
 		.device       = PCI_DEVICE_ID_PHILIPS_SAA7133,
 		.subvendor    = 0x0070,
 		.subdevice    = 0x6706,
-		.driver_data  = SAA7134_BOARD_HAUPPAUGE_HVR1120,
+		.driver_data  = SAA7134_BOARD_HAUPPAUGE_HVR1150,
 	},{
 		.vendor       = PCI_VENDOR_ID_PHILIPS,
 		.device       = PCI_DEVICE_ID_PHILIPS_SAA7133,
 		.subvendor    = 0x0070,
 		.subdevice    = 0x6707,
-		.driver_data  = SAA7134_BOARD_HAUPPAUGE_HVR1110R3,
+		.driver_data  = SAA7134_BOARD_HAUPPAUGE_HVR1120,
 	},{
 		.vendor       = PCI_VENDOR_ID_PHILIPS,
 		.device       = PCI_DEVICE_ID_PHILIPS_SAA7133,
 		.subvendor    = 0x0070,
 		.subdevice    = 0x6708,
-		.driver_data  = SAA7134_BOARD_HAUPPAUGE_HVR1120,
+		.driver_data  = SAA7134_BOARD_HAUPPAUGE_HVR1150,
 	},{
 		.vendor       = PCI_VENDOR_ID_PHILIPS,
 		.device       = PCI_DEVICE_ID_PHILIPS_SAA7133,
 		.subvendor    = 0x0070,
 		.subdevice    = 0x6709,
-		.driver_data  = SAA7134_BOARD_HAUPPAUGE_HVR1110R3,
+		.driver_data  = SAA7134_BOARD_HAUPPAUGE_HVR1120,
 	},{
 		.vendor       = PCI_VENDOR_ID_PHILIPS,
 		.device       = PCI_DEVICE_ID_PHILIPS_SAA7133,
 		.subvendor    = 0x0070,
 		.subdevice    = 0x670a,
-		.driver_data  = SAA7134_BOARD_HAUPPAUGE_HVR1110R3,
+		.driver_data  = SAA7134_BOARD_HAUPPAUGE_HVR1120,
 	},{
 		.vendor       = PCI_VENDOR_ID_PHILIPS,
 		.device       = PCI_DEVICE_ID_PHILIPS_SAA7133,
@@ -6363,8 +6363,8 @@ static int saa7134_tda8290_18271_callback(struct saa7134_dev *dev,
 	switch (command) {
 	case TDA18271_CALLBACK_CMD_AGC_ENABLE: /* 0 */
 		switch (dev->board) {
+		case SAA7134_BOARD_HAUPPAUGE_HVR1150:
 		case SAA7134_BOARD_HAUPPAUGE_HVR1120:
-		case SAA7134_BOARD_HAUPPAUGE_HVR1110R3:
 			ret = saa7134_tda18271_hvr11x0_toggle_agc(dev, arg);
 			break;
 		default:
@@ -6384,8 +6384,8 @@ static int saa7134_tda8290_callback(struct saa7134_dev *dev,
 	int ret;
 
 	switch (dev->board) {
+	case SAA7134_BOARD_HAUPPAUGE_HVR1150:
 	case SAA7134_BOARD_HAUPPAUGE_HVR1120:
-	case SAA7134_BOARD_HAUPPAUGE_HVR1110R3:
 		/* tda8290 + tda18271 */
 		ret = saa7134_tda8290_18271_callback(dev, command, arg);
 		break;
@@ -6427,7 +6427,7 @@ static void hauppauge_eeprom(struct saa7134_dev *dev, u8 *eeprom_data)
 	switch (tv.model) {
 	case 67019: /* WinTV-HVR1110 (Retail, IR Blaster, hybrid, FM, SVid/Comp, 3.5mm audio in) */
 	case 67109: /* WinTV-HVR1000 (Retail, IR Receive, analog, no FM, SVid/Comp, 3.5mm audio in) */
-	case 67201: /* WinTV-HVR1120 (Retail, IR Receive, hybrid, FM, SVid/Comp, 3.5mm audio in) */
+	case 67201: /* WinTV-HVR1150 (Retail, IR Receive, hybrid, FM, SVid/Comp, 3.5mm audio in) */
 	case 67301: /* WinTV-HVR1000 (Retail, IR Receive, analog, no FM, SVid/Comp, 3.5mm audio in) */
 	case 67209: /* WinTV-HVR1110 (Retail, IR Receive, hybrid, FM, SVid/Comp, 3.5mm audio in) */
 	case 67559: /* WinTV-HVR1110 (OEM, no IR, hybrid, FM, SVid/Comp, RCA aud) */
@@ -6435,7 +6435,7 @@ static void hauppauge_eeprom(struct saa7134_dev *dev, u8 *eeprom_data)
 	case 67579: /* WinTV-HVR1110 (OEM, no IR, hybrid, no FM) */
 	case 67589: /* WinTV-HVR1110 (OEM, no IR, hybrid, no FM, SVid/Comp, RCA aud) */
 	case 67599: /* WinTV-HVR1110 (OEM, no IR, hybrid, no FM, SVid/Comp, RCA aud) */
-	case 67651: /* WinTV-HVR1120 (OEM, no IR, hybrid, FM, SVid/Comp, RCA aud) */
+	case 67651: /* WinTV-HVR1150 (OEM, no IR, hybrid, FM, SVid/Comp, RCA aud) */
 	case 67659: /* WinTV-HVR1110 (OEM, no IR, hybrid, FM, SVid/Comp, RCA aud) */
 		break;
 	default:
@@ -6625,8 +6625,8 @@ int saa7134_board_init1(struct saa7134_dev *dev)
 
 		saa_writeb (SAA7134_PRODUCTION_TEST_MODE, 0x00);
 		break;
+	case SAA7134_BOARD_HAUPPAUGE_HVR1150:
 	case SAA7134_BOARD_HAUPPAUGE_HVR1120:
-	case SAA7134_BOARD_HAUPPAUGE_HVR1110R3:
 		/* GPIO 26 high for digital, low for analog */
 		saa7134_set_gpio(dev, 26, 0);
 		msleep(1);
@@ -6891,8 +6891,8 @@ int saa7134_board_init2(struct saa7134_dev *dev)
 		       dev->name, saa7134_boards[dev->board].name);
 	       }
 	       break;
+	case SAA7134_BOARD_HAUPPAUGE_HVR1150:
 	case SAA7134_BOARD_HAUPPAUGE_HVR1120:
-	case SAA7134_BOARD_HAUPPAUGE_HVR1110R3:
 		hauppauge_eeprom(dev, dev->eedata+0x80);
 		break;
 	case SAA7134_BOARD_HAUPPAUGE_HVR1110:

drivers/media/video/saa7134/saa7134-dvb.c

@@ -1119,7 +1119,7 @@ static int dvb_init(struct saa7134_dev *dev)
 					 &tda827x_cfg_2) < 0)
 			goto dettach_frontend;
 		break;
-	case SAA7134_BOARD_HAUPPAUGE_HVR1110R3:
+	case SAA7134_BOARD_HAUPPAUGE_HVR1120:
 		fe0->dvb.frontend = dvb_attach(tda10048_attach,
 					       &hcw_tda10048_config,
 					       &dev->i2c_adap);
@@ -1147,7 +1147,7 @@ static int dvb_init(struct saa7134_dev *dev)
 					 &tda827x_cfg_1) < 0)
 			goto dettach_frontend;
 		break;
-	case SAA7134_BOARD_HAUPPAUGE_HVR1120:
+	case SAA7134_BOARD_HAUPPAUGE_HVR1150:
 		fe0->dvb.frontend = dvb_attach(lgdt3305_attach,
 					       &hcw_lgdt3305_config,
 					       &dev->i2c_adap);

drivers/media/video/saa7134/saa7134.h

@@ -278,8 +278,8 @@ struct saa7134_format {
 #define SAA7134_BOARD_ASUSTeK_TIGER         152
 #define SAA7134_BOARD_KWORLD_PLUS_TV_ANALOG 153
 #define SAA7134_BOARD_AVERMEDIA_GO_007_FM_PLUS 154
-#define SAA7134_BOARD_HAUPPAUGE_HVR1120     155
-#define SAA7134_BOARD_HAUPPAUGE_HVR1110R3   156
+#define SAA7134_BOARD_HAUPPAUGE_HVR1150     155
+#define SAA7134_BOARD_HAUPPAUGE_HVR1120   156
 #define SAA7134_BOARD_AVERMEDIA_STUDIO_507UA 157
 #define SAA7134_BOARD_AVERMEDIA_CARDBUS_501 158
 #define SAA7134_BOARD_BEHOLD_505RDS         159

drivers/media/video/sh_mobile_ceu_camera.c

@@ -282,27 +282,24 @@ out:
 	return ret;
 }
 
+/* Called under spinlock_irqsave(&pcdev->lock, ...) */
 static void sh_mobile_ceu_videobuf_queue(struct videobuf_queue *vq,
 					 struct videobuf_buffer *vb)
 {
 	struct soc_camera_device *icd = vq->priv_data;
 	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
 	struct sh_mobile_ceu_dev *pcdev = ici->priv;
-	unsigned long flags;
 
 	dev_dbg(&icd->dev, "%s (vb=0x%p) 0x%08lx %zd\n", __func__,
 		vb, vb->baddr, vb->bsize);
 
 	vb->state = VIDEOBUF_QUEUED;
-	spin_lock_irqsave(&pcdev->lock, flags);
 	list_add_tail(&vb->queue, &pcdev->capture);
 
 	if (!pcdev->active) {
 		pcdev->active = vb;
 		sh_mobile_ceu_capture(pcdev);
 	}
-
-	spin_unlock_irqrestore(&pcdev->lock, flags);
 }
 
 static void sh_mobile_ceu_videobuf_release(struct videobuf_queue *vq,

drivers/media/video/stk-webcam.c

@@ -1050,8 +1050,8 @@ static int stk_setup_format(struct stk_camera *dev)
 		depth = 1;
 	else
 		depth = 2;
-	while (stk_sizes[i].m != dev->vsettings.mode
-			&& i < ARRAY_SIZE(stk_sizes))
+	while (i < ARRAY_SIZE(stk_sizes) &&
+			stk_sizes[i].m != dev->vsettings.mode)
 		i++;
 	if (i == ARRAY_SIZE(stk_sizes)) {
 		STK_ERROR("Something is broken in %s\n", __func__);

drivers/media/video/uvc/uvc_driver.c

@@ -1845,11 +1845,29 @@ static struct usb_device_id uvc_ids[] = {
 	  .bInterfaceSubClass	= 1,
 	  .bInterfaceProtocol	= 0,
 	  .driver_info		= UVC_QUIRK_STREAM_NO_FID },
-	/* ViMicro */
-	{ .match_flags		= USB_DEVICE_ID_MATCH_VENDOR
+	/* ViMicro Vega */
+	{ .match_flags		= USB_DEVICE_ID_MATCH_DEVICE
+				| USB_DEVICE_ID_MATCH_INT_INFO,
+	  .idVendor		= 0x0ac8,
+	  .idProduct		= 0x332d,
+	  .bInterfaceClass	= USB_CLASS_VIDEO,
+	  .bInterfaceSubClass	= 1,
+	  .bInterfaceProtocol	= 0,
+	  .driver_info		= UVC_QUIRK_FIX_BANDWIDTH },
+	/* ViMicro - Minoru3D */
+	{ .match_flags		= USB_DEVICE_ID_MATCH_DEVICE
+				| USB_DEVICE_ID_MATCH_INT_INFO,
+	  .idVendor		= 0x0ac8,
+	  .idProduct		= 0x3410,
+	  .bInterfaceClass	= USB_CLASS_VIDEO,
+	  .bInterfaceSubClass	= 1,
+	  .bInterfaceProtocol	= 0,
+	  .driver_info		= UVC_QUIRK_FIX_BANDWIDTH },
+	/* ViMicro Venus - Minoru3D */
+	{ .match_flags		= USB_DEVICE_ID_MATCH_DEVICE
 				| USB_DEVICE_ID_MATCH_INT_INFO,
 	  .idVendor		= 0x0ac8,
-	  .idProduct		= 0x0000,
+	  .idProduct		= 0x3420,
 	  .bInterfaceClass	= USB_CLASS_VIDEO,
 	  .bInterfaceSubClass	= 1,
 	  .bInterfaceProtocol	= 0,

drivers/media/video/uvc/uvc_status.c

@@ -145,8 +145,8 @@ static void uvc_status_complete(struct urb *urb)
 			break;
 
 		default:
-			uvc_printk(KERN_INFO, "unknown event type %u.\n",
-				dev->status[0]);
+			uvc_trace(UVC_TRACE_STATUS, "Unknown status event "
+				"type %u.\n", dev->status[0]);
 			break;
 		}
 	}

drivers/media/video/v4l2-ioctl.c

@@ -1081,8 +1081,10 @@ static long __video_do_ioctl(struct file *file,
 		/* Calls the specific handler */
 		if (ops->vidioc_g_std)
 			ret = ops->vidioc_g_std(file, fh, id);
-		else
+		else if (vfd->current_norm)
 			*id = vfd->current_norm;
+		else
+			ret = -EINVAL;
 
 		if (!ret)
 			dbgarg(cmd, "std=0x%08Lx\n", (long long unsigned)*id);
@@ -1553,12 +1555,19 @@ static long __video_do_ioctl(struct file *file,
 				break;
 			ret = ops->vidioc_g_parm(file, fh, p);
 		} else {
+			v4l2_std_id std = vfd->current_norm;
+
 			if (p->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
 				return -EINVAL;
 
-			v4l2_video_std_frame_period(vfd->current_norm,
-						    &p->parm.capture.timeperframe);
 			ret = 0;
+			if (ops->vidioc_g_std)
+				ret = ops->vidioc_g_std(file, fh, &std);
+			else if (std == 0)
+				ret = -EINVAL;
+			if (ret == 0)
+				v4l2_video_std_frame_period(std,
+						    &p->parm.capture.timeperframe);
 		}
 
 		dbgarg(cmd, "type=%d\n", p->type);