via-velocity: fix the WOL bug on 1000M full duplex forced mode.

The VIA velocity card can't be waken up by WOL tool on 1000M full
duplex forced mode. This patch fixes the bug.

Signed-off-by: David Lv <DavidLv@viatech.com.cn>
Acked-by: Francois Romieu <romieu@fr.zoreil.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/via-velocity.c

@@ -2923,6 +2923,7 @@ static u16 wol_calc_crc(int size, u8 *pattern, u8 *mask_pattern)
 static int velocity_set_wol(struct velocity_info *vptr)
 {
 	struct mac_regs __iomem *regs = vptr->mac_regs;
+	enum speed_opt spd_dpx = vptr->options.spd_dpx;
 	static u8 buf[256];
 	int i;
 
@@ -2968,6 +2969,12 @@ static int velocity_set_wol(struct velocity_info *vptr)
 
 	writew(0x0FFF, &regs->WOLSRClr);
 
+	if (spd_dpx == SPD_DPX_1000_FULL)
+		goto mac_done;
+
+	if (spd_dpx != SPD_DPX_AUTO)
+		goto advertise_done;
+
 	if (vptr->mii_status & VELOCITY_AUTONEG_ENABLE) {
 		if (PHYID_GET_PHY_ID(vptr->phy_id) == PHYID_CICADA_CS8201)
 			MII_REG_BITS_ON(AUXCR_MDPPS, MII_NCONFIG, vptr->mac_regs);
@@ -2978,6 +2985,7 @@ static int velocity_set_wol(struct velocity_info *vptr)
 	if (vptr->mii_status & VELOCITY_SPEED_1000)
 		MII_REG_BITS_ON(BMCR_ANRESTART, MII_BMCR, vptr->mac_regs);
 
+advertise_done:
 	BYTE_REG_BITS_ON(CHIPGCR_FCMODE, &regs->CHIPGCR);
 
 	{
@@ -2987,6 +2995,7 @@ static int velocity_set_wol(struct velocity_info *vptr)
 		writeb(GCR, &regs->CHIPGCR);
 	}
 
+mac_done:
 	BYTE_REG_BITS_OFF(ISR_PWEI, &regs->ISR);
 	/* Turn on SWPTAG just before entering power mode */
 	BYTE_REG_BITS_ON(STICKHW_SWPTAG, &regs->STICKHW);

drivers/net/via-velocity.h

@@ -361,7 +361,7 @@ enum  velocity_owner {
 #define MAC_REG_CHIPGSR     0x9C
 #define MAC_REG_TESTCFG     0x9D
 #define MAC_REG_DEBUG       0x9E
-#define MAC_REG_CHIPGCR     0x9F
+#define MAC_REG_CHIPGCR     0x9F	/* Chip Operation and Diagnostic Control */
 #define MAC_REG_WOLCR0_SET  0xA0
 #define MAC_REG_WOLCR1_SET  0xA1
 #define MAC_REG_PWCFG_SET   0xA2
@@ -848,10 +848,10 @@ enum  velocity_owner {
  *	Bits in CHIPGCR register
  */
 
-#define CHIPGCR_FCGMII      0x80	/* enable GMII mode */
-#define CHIPGCR_FCFDX       0x40
+#define CHIPGCR_FCGMII      0x80	/* force GMII (else MII only) */
+#define CHIPGCR_FCFDX       0x40	/* force full duplex */
 #define CHIPGCR_FCRESV      0x20
-#define CHIPGCR_FCMODE      0x10
+#define CHIPGCR_FCMODE      0x10	/* enable MAC forced mode */
 #define CHIPGCR_LPSOPT      0x08
 #define CHIPGCR_TM1US       0x04
 #define CHIPGCR_TM0US       0x02