Merge branch 'master' of /home/davem/src/GIT/linux-2.6/

Conflicts:
	include/linux/mod_devicetable.h
	scripts/mod/file2alias.c

Documentation/RCU/stallwarn.txt

@@ -3,35 +3,79 @@ Using RCU's CPU Stall Detector
 The CONFIG_RCU_CPU_STALL_DETECTOR kernel config parameter enables
 RCU's CPU stall detector, which detects conditions that unduly delay
 RCU grace periods.  The stall detector's idea of what constitutes
-"unduly delayed" is controlled by a pair of C preprocessor macros:
+"unduly delayed" is controlled by a set of C preprocessor macros:
 
 RCU_SECONDS_TILL_STALL_CHECK
 
 	This macro defines the period of time that RCU will wait from
 	the beginning of a grace period until it issues an RCU CPU
-	stall warning.	It is normally ten seconds.
+	stall warning.	This time period is normally ten seconds.
 
 RCU_SECONDS_TILL_STALL_RECHECK
 
 	This macro defines the period of time that RCU will wait after
-	issuing a stall warning until it issues another stall warning.
-	It is normally set to thirty seconds.
+	issuing a stall warning until it issues another stall warning
+	for the same stall.  This time period is normally set to thirty
+	seconds.
 
 RCU_STALL_RAT_DELAY
 
-	The CPU stall detector tries to make the offending CPU rat on itself,
-	as this often gives better-quality stack traces.  However, if
-	the offending CPU does not detect its own stall in the number
-	of jiffies specified by RCU_STALL_RAT_DELAY, then other CPUs will
-	complain.  This is normally set to two jiffies.
+	The CPU stall detector tries to make the offending CPU print its
+	own warnings, as this often gives better-quality stack traces.
+	However, if the offending CPU does not detect its own stall in
+	the number of jiffies specified by RCU_STALL_RAT_DELAY, then
+	some other CPU will complain.  This delay is normally set to
+	two jiffies.
 
-The following problems can result in an RCU CPU stall warning:
+When a CPU detects that it is stalling, it will print a message similar
+to the following:
+
+INFO: rcu_sched_state detected stall on CPU 5 (t=2500 jiffies)
+
+This message indicates that CPU 5 detected that it was causing a stall,
+and that the stall was affecting RCU-sched.  This message will normally be
+followed by a stack dump of the offending CPU.  On TREE_RCU kernel builds,
+RCU and RCU-sched are implemented by the same underlying mechanism,
+while on TREE_PREEMPT_RCU kernel builds, RCU is instead implemented
+by rcu_preempt_state.
+
+On the other hand, if the offending CPU fails to print out a stall-warning
+message quickly enough, some other CPU will print a message similar to
+the following:
+
+INFO: rcu_bh_state detected stalls on CPUs/tasks: { 3 5 } (detected by 2, 2502 jiffies)
+
+This message indicates that CPU 2 detected that CPUs 3 and 5 were both
+causing stalls, and that the stall was affecting RCU-bh.  This message
+will normally be followed by stack dumps for each CPU.  Please note that
+TREE_PREEMPT_RCU builds can be stalled by tasks as well as by CPUs,
+and that the tasks will be indicated by PID, for example, "P3421".
+It is even possible for a rcu_preempt_state stall to be caused by both
+CPUs -and- tasks, in which case the offending CPUs and tasks will all
+be called out in the list.
+
+Finally, if the grace period ends just as the stall warning starts
+printing, there will be a spurious stall-warning message:
+
+INFO: rcu_bh_state detected stalls on CPUs/tasks: { } (detected by 4, 2502 jiffies)
+
+This is rare, but does happen from time to time in real life.
+
+So your kernel printed an RCU CPU stall warning.  The next question is
+"What caused it?"  The following problems can result in RCU CPU stall
+warnings:
 
 o	A CPU looping in an RCU read-side critical section.
 	
-o	A CPU looping with interrupts disabled.
+o	A CPU looping with interrupts disabled.  This condition can
+	result in RCU-sched and RCU-bh stalls.
 
-o	A CPU looping with preemption disabled.
+o	A CPU looping with preemption disabled.  This condition can
+	result in RCU-sched stalls and, if ksoftirqd is in use, RCU-bh
+	stalls.
+
+o	A CPU looping with bottom halves disabled.  This condition can
+	result in RCU-sched and RCU-bh stalls.
 
 o	For !CONFIG_PREEMPT kernels, a CPU looping anywhere in the kernel
 	without invoking schedule().
@@ -39,20 +83,24 @@ o	For !CONFIG_PREEMPT kernels, a CPU looping anywhere in the kernel
 o	A bug in the RCU implementation.
 
 o	A hardware failure.  This is quite unlikely, but has occurred
-	at least once in a former life.  A CPU failed in a running system,
+	at least once in real life.  A CPU failed in a running system,
 	becoming unresponsive, but not causing an immediate crash.
 	This resulted in a series of RCU CPU stall warnings, eventually
 	leading the realization that the CPU had failed.
 
-The RCU, RCU-sched, and RCU-bh implementations have CPU stall warning.
-SRCU does not do so directly, but its calls to synchronize_sched() will
-result in RCU-sched detecting any CPU stalls that might be occurring.
-
-To diagnose the cause of the stall, inspect the stack traces.  The offending
-function will usually be near the top of the stack.  If you have a series
-of stall warnings from a single extended stall, comparing the stack traces
-can often help determine where the stall is occurring, which will usually
-be in the function nearest the top of the stack that stays the same from
-trace to trace.
+The RCU, RCU-sched, and RCU-bh implementations have CPU stall
+warning.  SRCU does not have its own CPU stall warnings, but its
+calls to synchronize_sched() will result in RCU-sched detecting
+RCU-sched-related CPU stalls.  Please note that RCU only detects
+CPU stalls when there is a grace period in progress.  No grace period,
+no CPU stall warnings.
+
+To diagnose the cause of the stall, inspect the stack traces.
+The offending function will usually be near the top of the stack.
+If you have a series of stall warnings from a single extended stall,
+comparing the stack traces can often help determine where the stall
+is occurring, which will usually be in the function nearest the top of
+that portion of the stack which remains the same from trace to trace.
+If you can reliably trigger the stall, ftrace can be quite helpful.
 
 RCU bugs can often be debugged with the help of CONFIG_RCU_TRACE.

Documentation/RCU/torture.txt

@@ -182,16 +182,6 @@ Similarly, sched_expedited RCU provides the following:
 	sched_expedited-torture: Reader Pipe:  12660320201 95875 0 0 0 0 0 0 0 0 0
 	sched_expedited-torture: Reader Batch:  12660424885 0 0 0 0 0 0 0 0 0 0
 	sched_expedited-torture: Free-Block Circulation:  1090795 1090795 1090794 1090793 1090792 1090791 1090790 1090789 1090788 1090787 0
-	state: -1 / 0:0 3:0 4:0
-
-As before, the first four lines are similar to those for RCU.
-The last line shows the task-migration state.  The first number is
--1 if synchronize_sched_expedited() is idle, -2 if in the process of
-posting wakeups to the migration kthreads, and N when waiting on CPU N.
-Each of the colon-separated fields following the "/" is a CPU:state pair.
-Valid states are "0" for idle, "1" for waiting for quiescent state,
-"2" for passed through quiescent state, and "3" when a race with a
-CPU-hotplug event forces use of the synchronize_sched() primitive.
 
 
 USAGE

Documentation/RCU/trace.txt

@@ -256,23 +256,23 @@ o	Each element of the form "1/1 0:127 ^0" represents one struct
 The output of "cat rcu/rcu_pending" looks as follows:
 
 rcu_sched:
-  0 np=255892 qsp=53936 cbr=0 cng=14417 gpc=10033 gps=24320 nf=6445 nn=146741
-  1 np=261224 qsp=54638 cbr=0 cng=25723 gpc=16310 gps=2849 nf=5912 nn=155792
-  2 np=237496 qsp=49664 cbr=0 cng=2762 gpc=45478 gps=1762 nf=1201 nn=136629
-  3 np=236249 qsp=48766 cbr=0 cng=286 gpc=48049 gps=1218 nf=207 nn=137723
-  4 np=221310 qsp=46850 cbr=0 cng=26 gpc=43161 gps=4634 nf=3529 nn=123110
-  5 np=237332 qsp=48449 cbr=0 cng=54 gpc=47920 gps=3252 nf=201 nn=137456
-  6 np=219995 qsp=46718 cbr=0 cng=50 gpc=42098 gps=6093 nf=4202 nn=120834
-  7 np=249893 qsp=49390 cbr=0 cng=72 gpc=38400 gps=17102 nf=41 nn=144888
+  0 np=255892 qsp=53936 rpq=85 cbr=0 cng=14417 gpc=10033 gps=24320 nf=6445 nn=146741
+  1 np=261224 qsp=54638 rpq=33 cbr=0 cng=25723 gpc=16310 gps=2849 nf=5912 nn=155792
+  2 np=237496 qsp=49664 rpq=23 cbr=0 cng=2762 gpc=45478 gps=1762 nf=1201 nn=136629
+  3 np=236249 qsp=48766 rpq=98 cbr=0 cng=286 gpc=48049 gps=1218 nf=207 nn=137723
+  4 np=221310 qsp=46850 rpq=7 cbr=0 cng=26 gpc=43161 gps=4634 nf=3529 nn=123110
+  5 np=237332 qsp=48449 rpq=9 cbr=0 cng=54 gpc=47920 gps=3252 nf=201 nn=137456
+  6 np=219995 qsp=46718 rpq=12 cbr=0 cng=50 gpc=42098 gps=6093 nf=4202 nn=120834
+  7 np=249893 qsp=49390 rpq=42 cbr=0 cng=72 gpc=38400 gps=17102 nf=41 nn=144888
 rcu_bh:
-  0 np=146741 qsp=1419 cbr=0 cng=6 gpc=0 gps=0 nf=2 nn=145314
-  1 np=155792 qsp=12597 cbr=0 cng=0 gpc=4 gps=8 nf=3 nn=143180
-  2 np=136629 qsp=18680 cbr=0 cng=0 gpc=7 gps=6 nf=0 nn=117936
-  3 np=137723 qsp=2843 cbr=0 cng=0 gpc=10 gps=7 nf=0 nn=134863
-  4 np=123110 qsp=12433 cbr=0 cng=0 gpc=4 gps=2 nf=0 nn=110671
-  5 np=137456 qsp=4210 cbr=0 cng=0 gpc=6 gps=5 nf=0 nn=133235
-  6 np=120834 qsp=9902 cbr=0 cng=0 gpc=6 gps=3 nf=2 nn=110921
-  7 np=144888 qsp=26336 cbr=0 cng=0 gpc=8 gps=2 nf=0 nn=118542
+  0 np=146741 qsp=1419 rpq=6 cbr=0 cng=6 gpc=0 gps=0 nf=2 nn=145314
+  1 np=155792 qsp=12597 rpq=3 cbr=0 cng=0 gpc=4 gps=8 nf=3 nn=143180
+  2 np=136629 qsp=18680 rpq=1 cbr=0 cng=0 gpc=7 gps=6 nf=0 nn=117936
+  3 np=137723 qsp=2843 rpq=0 cbr=0 cng=0 gpc=10 gps=7 nf=0 nn=134863
+  4 np=123110 qsp=12433 rpq=0 cbr=0 cng=0 gpc=4 gps=2 nf=0 nn=110671
+  5 np=137456 qsp=4210 rpq=1 cbr=0 cng=0 gpc=6 gps=5 nf=0 nn=133235
+  6 np=120834 qsp=9902 rpq=2 cbr=0 cng=0 gpc=6 gps=3 nf=2 nn=110921
+  7 np=144888 qsp=26336 rpq=0 cbr=0 cng=0 gpc=8 gps=2 nf=0 nn=118542
 
 As always, this is once again split into "rcu_sched" and "rcu_bh"
 portions, with CONFIG_TREE_PREEMPT_RCU kernels having an additional
@@ -284,6 +284,9 @@ o	"np" is the number of times that __rcu_pending() has been invoked
 o	"qsp" is the number of times that the RCU was waiting for a
 	quiescent state from this CPU.
 
+o	"rpq" is the number of times that the CPU had passed through
+	a quiescent state, but not yet reported it to RCU.
+
 o	"cbr" is the number of times that this CPU had RCU callbacks
 	that had passed through a grace period, and were thus ready
 	to be invoked.

Documentation/intel_txt.txt

@@ -161,13 +161,15 @@ o  In order to put a system into any of the sleep states after a TXT
       has been restored, it will restore the TPM PCRs and then
       transfer control back to the kernel's S3 resume vector.
       In order to preserve system integrity across S3, the kernel
-      provides tboot with a set of memory ranges (kernel
-      code/data/bss, S3 resume code, and AP trampoline) that tboot
-      will calculate a MAC (message authentication code) over and then
-      seal with the TPM.  On resume and once the measured environment
-      has been re-established, tboot will re-calculate the MAC and
-      verify it against the sealed value.  Tboot's policy determines
-      what happens if the verification fails.
+      provides tboot with a set of memory ranges (RAM and RESERVED_KERN
+      in the e820 table, but not any memory that BIOS might alter over
+      the S3 transition) that tboot will calculate a MAC (message
+      authentication code) over and then seal with the TPM. On resume
+      and once the measured environment has been re-established, tboot
+      will re-calculate the MAC and verify it against the sealed value.
+      Tboot's policy determines what happens if the verification fails.
+      Note that the c/s 194 of tboot which has the new MAC code supports
+      this.
 
 That's pretty much it for TXT support.
 

Documentation/kernel-parameters.txt

@@ -324,6 +324,8 @@ and is between 256 and 4096 characters. It is defined in the file
 				    they are unmapped. Otherwise they are
 				    flushed before they will be reused, which
 				    is a lot of faster
+			off	  - do not initialize any AMD IOMMU found in
+				    the system
 
 	amijoy.map=	[HW,JOY] Amiga joystick support
 			Map of devices attached to JOY0DAT and JOY1DAT
@@ -784,8 +786,12 @@ and is between 256 and 4096 characters. It is defined in the file
 			as early as possible in order to facilitate early
 			boot debugging.
 
-	ftrace_dump_on_oops
+	ftrace_dump_on_oops[=orig_cpu]
 			[FTRACE] will dump the trace buffers on oops.
+			If no parameter is passed, ftrace will dump
+			buffers of all CPUs, but if you pass orig_cpu, it will
+			dump only the buffer of the CPU that triggered the
+			oops.
 
 	ftrace_filter=[function-list]
 			[FTRACE] Limit the functions traced by the function

Documentation/kprobes.txt

@@ -165,8 +165,8 @@ the user entry_handler invocation is also skipped.
 
 1.4 How Does Jump Optimization Work?
 
-If you configured your kernel with CONFIG_OPTPROBES=y (currently
-this option is supported on x86/x86-64, non-preemptive kernel) and
+If your kernel is built with CONFIG_OPTPROBES=y (currently this flag
+is automatically set 'y' on x86/x86-64, non-preemptive kernel) and
 the "debug.kprobes_optimization" kernel parameter is set to 1 (see
 sysctl(8)), Kprobes tries to reduce probe-hit overhead by using a jump
 instruction instead of a breakpoint instruction at each probepoint.
@@ -271,8 +271,6 @@ tweak the kernel's execution path, you need to suppress optimization,
 using one of the following techniques:
 - Specify an empty function for the kprobe's post_handler or break_handler.
  or
-- Config CONFIG_OPTPROBES=n.
- or
 - Execute 'sysctl -w debug.kprobes_optimization=n'
 
 2. Architectures Supported
@@ -307,10 +305,6 @@ it useful to "Compile the kernel with debug info" (CONFIG_DEBUG_INFO),
 so you can use "objdump -d -l vmlinux" to see the source-to-object
 code mapping.
 
-If you want to reduce probing overhead, set "Kprobes jump optimization
-support" (CONFIG_OPTPROBES) to "y". You can find this option under the
-"Kprobes" line.
-
 4. API Reference
 
 The Kprobes API includes a "register" function and an "unregister"

Documentation/rbtree.txt

@@ -190,3 +190,61 @@ Example:
   for (node = rb_first(&mytree); node; node = rb_next(node))
 	printk("key=%s\n", rb_entry(node, struct mytype, node)->keystring);
 
+Support for Augmented rbtrees
+-----------------------------
+
+Augmented rbtree is an rbtree with "some" additional data stored in each node.
+This data can be used to augment some new functionality to rbtree.
+Augmented rbtree is an optional feature built on top of basic rbtree
+infrastructure. rbtree user who wants this feature will have an augment
+callback function in rb_root initialized.
+
+This callback function will be called from rbtree core routines whenever
+a node has a change in one or both of its children. It is the responsibility
+of the callback function to recalculate the additional data that is in the
+rb node using new children information. Note that if this new additional
+data affects the parent node's additional data, then callback function has
+to handle it and do the recursive updates.
+
+
+Interval tree is an example of augmented rb tree. Reference -
+"Introduction to Algorithms" by Cormen, Leiserson, Rivest and Stein.
+More details about interval trees:
+
+Classical rbtree has a single key and it cannot be directly used to store
+interval ranges like [lo:hi] and do a quick lookup for any overlap with a new
+lo:hi or to find whether there is an exact match for a new lo:hi.
+
+However, rbtree can be augmented to store such interval ranges in a structured
+way making it possible to do efficient lookup and exact match.
+
+This "extra information" stored in each node is the maximum hi
+(max_hi) value among all the nodes that are its descendents. This
+information can be maintained at each node just be looking at the node
+and its immediate children. And this will be used in O(log n) lookup
+for lowest match (lowest start address among all possible matches)
+with something like:
+
+find_lowest_match(lo, hi, node)
+{
+	lowest_match = NULL;
+	while (node) {
+		if (max_hi(node->left) > lo) {
+			// Lowest overlap if any must be on left side
+			node = node->left;
+		} else if (overlap(lo, hi, node)) {
+			lowest_match = node;
+			break;
+		} else if (lo > node->lo) {
+			// Lowest overlap if any must be on right side
+			node = node->right;
+		} else {
+			break;
+		}
+	}
+	return lowest_match;
+}
+
+Finding exact match will be to first find lowest match and then to follow
+successor nodes looking for exact match, until the start of a node is beyond
+the hi value we are looking for.

Documentation/scheduler/sched-design-CFS.txt

@@ -211,7 +211,7 @@ provide fair CPU time to each such task group.  For example, it may be
 desirable to first provide fair CPU time to each user on the system and then to
 each task belonging to a user.
 
-CONFIG_GROUP_SCHED strives to achieve exactly that.  It lets tasks to be
+CONFIG_CGROUP_SCHED strives to achieve exactly that.  It lets tasks to be
 grouped and divides CPU time fairly among such groups.
 
 CONFIG_RT_GROUP_SCHED permits to group real-time (i.e., SCHED_FIFO and
@@ -220,38 +220,11 @@ SCHED_RR) tasks.
 CONFIG_FAIR_GROUP_SCHED permits to group CFS (i.e., SCHED_NORMAL and
 SCHED_BATCH) tasks.
 
-At present, there are two (mutually exclusive) mechanisms to group tasks for
-CPU bandwidth control purposes:
-
- - Based on user id (CONFIG_USER_SCHED)
-
-   With this option, tasks are grouped according to their user id.
-
- - Based on "cgroup" pseudo filesystem (CONFIG_CGROUP_SCHED)
-
-   This options needs CONFIG_CGROUPS to be defined, and lets the administrator
+   These options need CONFIG_CGROUPS to be defined, and let the administrator
    create arbitrary groups of tasks, using the "cgroup" pseudo filesystem.  See
    Documentation/cgroups/cgroups.txt for more information about this filesystem.
 
-Only one of these options to group tasks can be chosen and not both.
-
-When CONFIG_USER_SCHED is defined, a directory is created in sysfs for each new
-user and a "cpu_share" file is added in that directory.
-
-	# cd /sys/kernel/uids
-	# cat 512/cpu_share		# Display user 512's CPU share
-	1024
-	# echo 2048 > 512/cpu_share	# Modify user 512's CPU share
-	# cat 512/cpu_share		# Display user 512's CPU share
-	2048
-	#
-
-CPU bandwidth between two users is divided in the ratio of their CPU shares.
-For example: if you would like user "root" to get twice the bandwidth of user
-"guest," then set the cpu_share for both the users such that "root"'s cpu_share
-is twice "guest"'s cpu_share.
-
-When CONFIG_CGROUP_SCHED is defined, a "cpu.shares" file is created for each
+When CONFIG_FAIR_GROUP_SCHED is defined, a "cpu.shares" file is created for each
 group created using the pseudo filesystem.  See example steps below to create
 task groups and modify their CPU share using the "cgroups" pseudo filesystem.
 
@@ -273,24 +246,3 @@ task groups and modify their CPU share using the "cgroups" pseudo filesystem.
 
 	# #Launch gmplayer (or your favourite movie player)
 	# echo <movie_player_pid> > multimedia/tasks
-
-8. Implementation note: user namespaces
-
-User namespaces are intended to be hierarchical.  But they are currently
-only partially implemented.  Each of those has ramifications for CFS.
-
-First, since user namespaces are hierarchical, the /sys/kernel/uids
-presentation is inadequate.  Eventually we will likely want to use sysfs
-tagging to provide private views of /sys/kernel/uids within each user
-namespace.
-
-Second, the hierarchical nature is intended to support completely
-unprivileged use of user namespaces.  So if using user groups, then
-we want the users in a user namespace to be children of the user
-who created it.
-
-That is currently unimplemented.  So instead, every user in a new
-user namespace will receive 1024 shares just like any user in the
-initial user namespace.  Note that at the moment creation of a new
-user namespace requires each of CAP_SYS_ADMIN, CAP_SETUID, and
-CAP_SETGID.

Documentation/scheduler/sched-rt-group.txt

@@ -126,23 +126,12 @@ priority!
 2.3 Basis for grouping tasks
 ----------------------------
 
-There are two compile-time settings for allocating CPU bandwidth. These are
-configured using the "Basis for grouping tasks" multiple choice menu under
-General setup > Group CPU Scheduler:
-
-a. CONFIG_USER_SCHED (aka "Basis for grouping tasks" =  "user id")
-
-This lets you use the virtual files under
-"/sys/kernel/uids/<uid>/cpu_rt_runtime_us" to control he CPU time reserved for
-each user .
-
-The other option is:
-
-.o CONFIG_CGROUP_SCHED (aka "Basis for grouping tasks" = "Control groups")
+Enabling CONFIG_RT_GROUP_SCHED lets you explicitly allocate real
+CPU bandwidth to task groups.
 
 This uses the /cgroup virtual file system and
 "/cgroup/<cgroup>/cpu.rt_runtime_us" to control the CPU time reserved for each
-control group instead.
+control group.
 
 For more information on working with control groups, you should read
 Documentation/cgroups/cgroups.txt as well.
@@ -161,8 +150,7 @@ For now, this can be simplified to just the following (but see Future plans):
 ===============
 
 There is work in progress to make the scheduling period for each group
-("/sys/kernel/uids/<uid>/cpu_rt_period_us" or
-"/cgroup/<cgroup>/cpu.rt_period_us" respectively) configurable as well.
+("/cgroup/<cgroup>/cpu.rt_period_us") configurable as well.
 
 The constraint on the period is that a subgroup must have a smaller or
 equal period to its parent. But realistically its not very useful _yet_

Documentation/trace/events.txt

@@ -90,7 +90,8 @@ In order to facilitate early boot debugging, use boot option:
 
 	trace_event=[event-list]
 
-The format of this boot option is the same as described in section 2.1.
+event-list is a comma separated list of events. See section 2.1 for event
+format.
 
 3. Defining an event-enabled tracepoint
 =======================================

Documentation/trace/ftrace.txt

@@ -155,6 +155,9 @@ of ftrace. Here is a list of some of the key files:
 	to be traced. Echoing names of functions into this file
 	will limit the trace to only those functions.
 
+	This interface also allows for commands to be used. See the
+	"Filter commands" section for more details.
+
   set_ftrace_notrace:
 
 	This has an effect opposite to that of
@@ -1337,12 +1340,14 @@ ftrace_dump_on_oops must be set. To set ftrace_dump_on_oops, one
 can either use the sysctl function or set it via the proc system
 interface.
 
-  sysctl kernel.ftrace_dump_on_oops=1
+  sysctl kernel.ftrace_dump_on_oops=n
 
 or
 
-  echo 1 > /proc/sys/kernel/ftrace_dump_on_oops
+  echo n > /proc/sys/kernel/ftrace_dump_on_oops
 
+If n = 1, ftrace will dump buffers of all CPUs, if n = 2 ftrace will
+only dump the buffer of the CPU that triggered the oops.
 
 Here's an example of such a dump after a null pointer
 dereference in a kernel module:
@@ -1822,6 +1827,47 @@ this special filter via:
  echo > set_graph_function
 
 
+Filter commands
+---------------
+
+A few commands are supported by the set_ftrace_filter interface.
+Trace commands have the following format:
+
+<function>:<command>:<parameter>
+
+The following commands are supported:
+
+- mod
+  This command enables function filtering per module. The
+  parameter defines the module. For example, if only the write*
+  functions in the ext3 module are desired, run:
+
+   echo 'write*:mod:ext3' > set_ftrace_filter
+
+  This command interacts with the filter in the same way as
+  filtering based on function names. Thus, adding more functions
+  in a different module is accomplished by appending (>>) to the
+  filter file. Remove specific module functions by prepending
+  '!':
+
+   echo '!writeback*:mod:ext3' >> set_ftrace_filter
+
+- traceon/traceoff
+  These commands turn tracing on and off when the specified
+  functions are hit. The parameter determines how many times the
+  tracing system is turned on and off. If unspecified, there is
+  no limit. For example, to disable tracing when a schedule bug
+  is hit the first 5 times, run:
+
+   echo '__schedule_bug:traceoff:5' > set_ftrace_filter
+
+  These commands are cumulative whether or not they are appended
+  to set_ftrace_filter. To remove a command, prepend it by '!'
+  and drop the parameter:
+
+   echo '!__schedule_bug:traceoff' > set_ftrace_filter
+
+
 trace_pipe
 ----------
 

Documentation/trace/kprobetrace.txt

@@ -40,7 +40,9 @@ Synopsis of kprobe_events
   $stack	: Fetch stack address.
   $retval	: Fetch return value.(*)
   +|-offs(FETCHARG) : Fetch memory at FETCHARG +|- offs address.(**)
-  NAME=FETCHARG: Set NAME as the argument name of FETCHARG.
+  NAME=FETCHARG : Set NAME as the argument name of FETCHARG.
+  FETCHARG:TYPE : Set TYPE as the type of FETCHARG. Currently, basic types
+		  (u8/u16/u32/u64/s8/s16/s32/s64) are supported.
 
   (*) only for return probe.
   (**) this is useful for fetching a field of data structures.

MAINTAINERS

@@ -2954,6 +2954,17 @@ S:	Odd Fixes
 F:	Documentation/networking/README.ipw2200
 F:	drivers/net/wireless/ipw2x00/ipw2200.*
 
+INTEL(R) TRUSTED EXECUTION TECHNOLOGY (TXT)
+M:	Joseph Cihula <joseph.cihula@intel.com>
+M:	Shane Wang <shane.wang@intel.com>
+L:	tboot-devel@lists.sourceforge.net
+W:	http://tboot.sourceforge.net
+T:	Mercurial http://www.bughost.org/repos.hg/tboot.hg
+S:	Supported
+F:	Documentation/intel_txt.txt
+F:	include/linux/tboot.h
+F:	arch/x86/kernel/tboot.c
+
 INTEL WIRELESS WIMAX CONNECTION 2400
 M:	Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
 M:	linux-wimax@intel.com
@@ -4165,6 +4176,7 @@ OPROFILE
 M:	Robert Richter <robert.richter@amd.com>
 L:	oprofile-list@lists.sf.net
 S:	Maintained
+F:	arch/*/include/asm/oprofile*.h
 F:	arch/*/oprofile/
 F:	drivers/oprofile/
 F:	include/linux/oprofile.h
@@ -4353,13 +4365,13 @@ M:	Paul Mackerras <paulus@samba.org>
 M:	Ingo Molnar <mingo@elte.hu>
 M:	Arnaldo Carvalho de Melo <acme@redhat.com>
 S:	Supported
-F:	kernel/perf_event.c
+F:	kernel/perf_event*.c
 F:	include/linux/perf_event.h
-F:	arch/*/kernel/perf_event.c
-F:	arch/*/kernel/*/perf_event.c
-F:	arch/*/kernel/*/*/perf_event.c
+F:	arch/*/kernel/perf_event*.c
+F:	arch/*/kernel/*/perf_event*.c
+F:	arch/*/kernel/*/*/perf_event*.c
 F:	arch/*/include/asm/perf_event.h
-F:	arch/*/lib/perf_event.c
+F:	arch/*/lib/perf_event*.c
 F:	arch/*/kernel/perf_callchain.c
 F:	tools/perf/
 
@@ -5493,7 +5505,7 @@ S:	Maintained
 F:	drivers/mmc/host/tmio_mmc.*
 
 TMPFS (SHMEM FILESYSTEM)
-M:	Hugh Dickins <hugh.dickins@tiscali.co.uk>
+M:	Hugh Dickins <hughd@google.com>
 L:	linux-mm@kvack.org
 S:	Maintained
 F:	include/linux/shmem_fs.h

Makefile

@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 34
-EXTRAVERSION = -rc7
+EXTRAVERSION =
 NAME = Sheep on Meth
 
 # *DOCUMENTATION*

arch/Kconfig

@@ -42,15 +42,10 @@ config KPROBES
 	  If in doubt, say "N".
 
 config OPTPROBES
-	bool "Kprobes jump optimization support (EXPERIMENTAL)"
-	default y
-	depends on KPROBES
+	def_bool y
+	depends on KPROBES && HAVE_OPTPROBES
 	depends on !PREEMPT
-	depends on HAVE_OPTPROBES
 	select KALLSYMS_ALL
-	help
-	  This option will allow kprobes to optimize breakpoint to
-	  a jump for reducing its overhead.
 
 config HAVE_EFFICIENT_UNALIGNED_ACCESS
 	bool
@@ -142,6 +137,17 @@ config HAVE_HW_BREAKPOINT
 	bool
 	depends on PERF_EVENTS
 
+config HAVE_MIXED_BREAKPOINTS_REGS
+	bool
+	depends on HAVE_HW_BREAKPOINT
+	help
+	  Depending on the arch implementation of hardware breakpoints,
+	  some of them have separate registers for data and instruction
+	  breakpoints addresses, others have mixed registers to store
+	  them but define the access type in a control register.
+	  Select this option if your arch implements breakpoints under the
+	  latter fashion.
+
 config HAVE_USER_RETURN_NOTIFIER
 	bool
 

arch/alpha/include/asm/atomic.h

@@ -17,8 +17,8 @@
 #define ATOMIC_INIT(i)		( (atomic_t) { (i) } )
 #define ATOMIC64_INIT(i)	( (atomic64_t) { (i) } )
 
-#define atomic_read(v)		((v)->counter + 0)
-#define atomic64_read(v)	((v)->counter + 0)
+#define atomic_read(v)		(*(volatile int *)&(v)->counter)
+#define atomic64_read(v)	(*(volatile long *)&(v)->counter)
 
 #define atomic_set(v,i)		((v)->counter = (i))
 #define atomic64_set(v,i)	((v)->counter = (i))

arch/alpha/include/asm/bitops.h

@@ -405,29 +405,31 @@ static inline int fls(int x)
 
 #if defined(CONFIG_ALPHA_EV6) && defined(CONFIG_ALPHA_EV67)
 /* Whee.  EV67 can calculate it directly.  */
-static inline unsigned long hweight64(unsigned long w)
+static inline unsigned long __arch_hweight64(unsigned long w)
 {
 	return __kernel_ctpop(w);
 }
 
-static inline unsigned int hweight32(unsigned int w)
+static inline unsigned int __arch_weight32(unsigned int w)
 {
-	return hweight64(w);
+	return __arch_hweight64(w);
 }
 
-static inline unsigned int hweight16(unsigned int w)
+static inline unsigned int __arch_hweight16(unsigned int w)
 {
-	return hweight64(w & 0xffff);
+	return __arch_hweight64(w & 0xffff);
 }
 
-static inline unsigned int hweight8(unsigned int w)
+static inline unsigned int __arch_hweight8(unsigned int w)
 {
-	return hweight64(w & 0xff);
+	return __arch_hweight64(w & 0xff);
 }
 #else
-#include <asm-generic/bitops/hweight.h>
+#include <asm-generic/bitops/arch_hweight.h>
 #endif
 
+#include <asm-generic/bitops/const_hweight.h>
+
 #endif /* __KERNEL__ */
 
 #include <asm-generic/bitops/find.h>

arch/arm/include/asm/atomic.h

@@ -24,7 +24,7 @@
  * strex/ldrex monitor on some implementations. The reason we can use it for
  * atomic_set() is the clrex or dummy strex done on every exception return.
  */
-#define atomic_read(v)	((v)->counter)
+#define atomic_read(v)	(*(volatile int *)&(v)->counter)
 #define atomic_set(v,i)	(((v)->counter) = (i))
 
 #if __LINUX_ARM_ARCH__ >= 6

arch/arm/include/asm/cacheflush.h

@@ -371,6 +371,10 @@ static inline void __flush_icache_all(void)
 #ifdef CONFIG_ARM_ERRATA_411920
 	extern void v6_icache_inval_all(void);
 	v6_icache_inval_all();
+#elif defined(CONFIG_SMP) && __LINUX_ARM_ARCH__ >= 7
+	asm("mcr	p15, 0, %0, c7, c1, 0	@ invalidate I-cache inner shareable\n"
+	    :
+	    : "r" (0));
 #else
 	asm("mcr	p15, 0, %0, c7, c5, 0	@ invalidate I-cache\n"
 	    :

arch/arm/include/asm/smp_twd.h

@@ -1,6 +1,23 @@
 #ifndef __ASMARM_SMP_TWD_H
 #define __ASMARM_SMP_TWD_H
 
+#define TWD_TIMER_LOAD			0x00
+#define TWD_TIMER_COUNTER		0x04
+#define TWD_TIMER_CONTROL		0x08
+#define TWD_TIMER_INTSTAT		0x0C
+
+#define TWD_WDOG_LOAD			0x20
+#define TWD_WDOG_COUNTER		0x24
+#define TWD_WDOG_CONTROL		0x28
+#define TWD_WDOG_INTSTAT		0x2C
+#define TWD_WDOG_RESETSTAT		0x30
+#define TWD_WDOG_DISABLE		0x34
+
+#define TWD_TIMER_CONTROL_ENABLE	(1 << 0)
+#define TWD_TIMER_CONTROL_ONESHOT	(0 << 1)
+#define TWD_TIMER_CONTROL_PERIODIC	(1 << 1)
+#define TWD_TIMER_CONTROL_IT_ENABLE	(1 << 2)
+
 struct clock_event_device;
 
 extern void __iomem *twd_base;

arch/arm/include/asm/tlbflush.h

@@ -46,6 +46,9 @@
 #define TLB_V7_UIS_FULL (1 << 20)
 #define TLB_V7_UIS_ASID (1 << 21)
 
+/* Inner Shareable BTB operation (ARMv7 MP extensions) */
+#define TLB_V7_IS_BTB	(1 << 22)
+
 #define TLB_L2CLEAN_FR	(1 << 29)		/* Feroceon */
 #define TLB_DCLEAN	(1 << 30)
 #define TLB_WB		(1 << 31)
@@ -183,7 +186,7 @@
 #endif
 
 #ifdef CONFIG_SMP
-#define v7wbi_tlb_flags (TLB_WB | TLB_DCLEAN | TLB_BTB | \
+#define v7wbi_tlb_flags (TLB_WB | TLB_DCLEAN | TLB_V7_IS_BTB | \
 			 TLB_V7_UIS_FULL | TLB_V7_UIS_PAGE | TLB_V7_UIS_ASID)
 #else
 #define v7wbi_tlb_flags (TLB_WB | TLB_DCLEAN | TLB_BTB | \
@@ -339,6 +342,12 @@ static inline void local_flush_tlb_all(void)
 		dsb();
 		isb();
 	}
+	if (tlb_flag(TLB_V7_IS_BTB)) {
+		/* flush the branch target cache */
+		asm("mcr p15, 0, %0, c7, c1, 6" : : "r" (zero) : "cc");
+		dsb();
+		isb();
+	}
 }
 
 static inline void local_flush_tlb_mm(struct mm_struct *mm)
@@ -376,6 +385,12 @@ static inline void local_flush_tlb_mm(struct mm_struct *mm)
 		asm("mcr p15, 0, %0, c7, c5, 6" : : "r" (zero) : "cc");
 		dsb();
 	}
+	if (tlb_flag(TLB_V7_IS_BTB)) {
+		/* flush the branch target cache */
+		asm("mcr p15, 0, %0, c7, c1, 6" : : "r" (zero) : "cc");
+		dsb();
+		isb();
+	}
 }
 
 static inline void
@@ -416,6 +431,12 @@ local_flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr)
 		asm("mcr p15, 0, %0, c7, c5, 6" : : "r" (zero) : "cc");
 		dsb();
 	}
+	if (tlb_flag(TLB_V7_IS_BTB)) {
+		/* flush the branch target cache */
+		asm("mcr p15, 0, %0, c7, c1, 6" : : "r" (zero) : "cc");
+		dsb();
+		isb();
+	}
 }
 
 static inline void local_flush_tlb_kernel_page(unsigned long kaddr)
@@ -454,6 +475,12 @@ static inline void local_flush_tlb_kernel_page(unsigned long kaddr)
 		dsb();
 		isb();
 	}
+	if (tlb_flag(TLB_V7_IS_BTB)) {
+		/* flush the branch target cache */
+		asm("mcr p15, 0, %0, c7, c1, 6" : : "r" (zero) : "cc");
+		dsb();
+		isb();
+	}
 }
 
 /*

arch/arm/kernel/smp_twd.c

@@ -21,23 +21,6 @@
 #include <asm/smp_twd.h>
 #include <asm/hardware/gic.h>
 
-#define TWD_TIMER_LOAD 			0x00
-#define TWD_TIMER_COUNTER		0x04
-#define TWD_TIMER_CONTROL		0x08
-#define TWD_TIMER_INTSTAT		0x0C
-
-#define TWD_WDOG_LOAD			0x20
-#define TWD_WDOG_COUNTER		0x24
-#define TWD_WDOG_CONTROL		0x28
-#define TWD_WDOG_INTSTAT		0x2C
-#define TWD_WDOG_RESETSTAT		0x30
-#define TWD_WDOG_DISABLE		0x34
-
-#define TWD_TIMER_CONTROL_ENABLE	(1 << 0)
-#define TWD_TIMER_CONTROL_ONESHOT	(0 << 1)
-#define TWD_TIMER_CONTROL_PERIODIC	(1 << 1)
-#define TWD_TIMER_CONTROL_IT_ENABLE	(1 << 2)
-
 /* set up by the platform code */
 void __iomem *twd_base;
 

arch/arm/lib/clear_user.S

@@ -45,6 +45,7 @@ USER(		strnebt	r2, [r0])
 		mov	r0, #0
 		ldmfd	sp!, {r1, pc}
 ENDPROC(__clear_user)
+ENDPROC(__clear_user_std)
 
 		.pushsection .fixup,"ax"
 		.align	0

arch/arm/lib/copy_to_user.S

@@ -93,6 +93,7 @@ WEAK(__copy_to_user)
 #include "copy_template.S"
 
 ENDPROC(__copy_to_user)
+ENDPROC(__copy_to_user_std)
 
 	.pushsection .fixup,"ax"
 	.align 0

arch/arm/mach-davinci/da830.c

@@ -410,7 +410,7 @@ static struct clk_lookup da830_clks[] = {
 	CLK("davinci-mcasp.0",	NULL,		&mcasp0_clk),
 	CLK("davinci-mcasp.1",	NULL,		&mcasp1_clk),
 	CLK("davinci-mcasp.2",	NULL,		&mcasp2_clk),
-	CLK("musb_hdrc",	NULL,		&usb20_clk),
+	CLK(NULL,		"usb20",	&usb20_clk),
 	CLK(NULL,		"aemif",	&aemif_clk),
 	CLK(NULL,		"aintc",	&aintc_clk),
 	CLK(NULL,		"secu_mgr",	&secu_mgr_clk),

arch/arm/mm/cache-v6.S

@@ -211,6 +211,9 @@ v6_dma_inv_range:
 	mcrne	p15, 0, r1, c7, c15, 1		@ clean & invalidate unified line
 #endif
 1:
+#ifdef CONFIG_SMP
+	str	r0, [r0]			@ write for ownership
+#endif
 #ifdef HARVARD_CACHE
 	mcr	p15, 0, r0, c7, c6, 1		@ invalidate D line
 #else
@@ -231,6 +234,9 @@ v6_dma_inv_range:
 v6_dma_clean_range:
 	bic	r0, r0, #D_CACHE_LINE_SIZE - 1
 1:
+#ifdef CONFIG_SMP
+	ldr	r2, [r0]			@ read for ownership
+#endif
 #ifdef HARVARD_CACHE
 	mcr	p15, 0, r0, c7, c10, 1		@ clean D line
 #else
@@ -251,6 +257,10 @@ v6_dma_clean_range:
 ENTRY(v6_dma_flush_range)
 	bic	r0, r0, #D_CACHE_LINE_SIZE - 1
 1:
+#ifdef CONFIG_SMP
+	ldr	r2, [r0]			@ read for ownership
+	str	r2, [r0]			@ write for ownership
+#endif
 #ifdef HARVARD_CACHE
 	mcr	p15, 0, r0, c7, c14, 1		@ clean & invalidate D line
 #else
@@ -273,7 +283,9 @@ ENTRY(v6_dma_map_area)
 	add	r1, r1, r0
 	teq	r2, #DMA_FROM_DEVICE
 	beq	v6_dma_inv_range
-	b	v6_dma_clean_range
+	teq	r2, #DMA_TO_DEVICE
+	beq	v6_dma_clean_range
+	b	v6_dma_flush_range
 ENDPROC(v6_dma_map_area)
 
 /*
@@ -283,9 +295,6 @@ ENDPROC(v6_dma_map_area)
  *	- dir	- DMA direction
  */
 ENTRY(v6_dma_unmap_area)
-	add	r1, r1, r0
-	teq	r2, #DMA_TO_DEVICE
-	bne	v6_dma_inv_range
 	mov	pc, lr
 ENDPROC(v6_dma_unmap_area)
 

arch/arm/mm/cache-v7.S

@@ -167,7 +167,11 @@ ENTRY(v7_coherent_user_range)
 	cmp	r0, r1
 	blo	1b
 	mov	r0, #0
+#ifdef CONFIG_SMP
+	mcr	p15, 0, r0, c7, c1, 6		@ invalidate BTB Inner Shareable
+#else
 	mcr	p15, 0, r0, c7, c5, 6		@ invalidate BTB
+#endif
 	dsb
 	isb
 	mov	pc, lr

arch/arm/mm/nommu.c

@@ -65,6 +65,15 @@ void flush_dcache_page(struct page *page)
 }
 EXPORT_SYMBOL(flush_dcache_page);
 
+void copy_to_user_page(struct vm_area_struct *vma, struct page *page,
+		       unsigned long uaddr, void *dst, const void *src,
+		       unsigned long len)
+{
+	memcpy(dst, src, len);
+	if (vma->vm_flags & VM_EXEC)
+		__cpuc_coherent_user_range(uaddr, uaddr + len);
+}
+
 void __iomem *__arm_ioremap_pfn(unsigned long pfn, unsigned long offset,
 				size_t size, unsigned int mtype)
 {
@@ -87,8 +96,8 @@ void __iomem *__arm_ioremap(unsigned long phys_addr, size_t size,
 }
 EXPORT_SYMBOL(__arm_ioremap);
 
-void __iomem *__arm_ioremap(unsigned long phys_addr, size_t size,
-			    unsigned int mtype, void *caller)
+void __iomem *__arm_ioremap_caller(unsigned long phys_addr, size_t size,
+				   unsigned int mtype, void *caller)
 {
 	return __arm_ioremap(phys_addr, size, mtype);
 }

arch/arm/mm/tlb-v7.S

@@ -50,7 +50,11 @@ ENTRY(v7wbi_flush_user_tlb_range)
 	cmp	r0, r1
 	blo	1b
 	mov	ip, #0
+#ifdef CONFIG_SMP
+	mcr	p15, 0, ip, c7, c1, 6		@ flush BTAC/BTB Inner Shareable
+#else
 	mcr	p15, 0, ip, c7, c5, 6		@ flush BTAC/BTB
+#endif
 	dsb
 	mov	pc, lr
 ENDPROC(v7wbi_flush_user_tlb_range)
@@ -79,7 +83,11 @@ ENTRY(v7wbi_flush_kern_tlb_range)
 	cmp	r0, r1
 	blo	1b
 	mov	r2, #0
+#ifdef CONFIG_SMP
+	mcr	p15, 0, r2, c7, c1, 6		@ flush BTAC/BTB Inner Shareable
+#else
 	mcr	p15, 0, r2, c7, c5, 6		@ flush BTAC/BTB
+#endif
 	dsb
 	isb
 	mov	pc, lr

arch/avr32/include/asm/atomic.h

@@ -19,7 +19,7 @@
 
 #define ATOMIC_INIT(i)  { (i) }
 
-#define atomic_read(v)		((v)->counter)
+#define atomic_read(v)		(*(volatile int *)&(v)->counter)
 #define atomic_set(v, i)	(((v)->counter) = i)
 
 /*

arch/cris/include/asm/atomic.h

@@ -15,7 +15,7 @@
 
 #define ATOMIC_INIT(i)  { (i) }
 
-#define atomic_read(v) ((v)->counter)
+#define atomic_read(v) (*(volatile int *)&(v)->counter)
 #define atomic_set(v,i) (((v)->counter) = (i))
 
 /* These should be written in asm but we do it in C for now. */

arch/frv/include/asm/atomic.h

@@ -36,7 +36,7 @@
 #define smp_mb__after_atomic_inc()	barrier()
 
 #define ATOMIC_INIT(i)		{ (i) }
-#define atomic_read(v)		((v)->counter)
+#define atomic_read(v)		(*(volatile int *)&(v)->counter)
 #define atomic_set(v, i)	(((v)->counter) = (i))
 
 #ifndef CONFIG_FRV_OUTOFLINE_ATOMIC_OPS

arch/h8300/include/asm/atomic.h

@@ -10,7 +10,7 @@
 
 #define ATOMIC_INIT(i)	{ (i) }
 
-#define atomic_read(v)		((v)->counter)
+#define atomic_read(v)		(*(volatile int *)&(v)->counter)
 #define atomic_set(v, i)	(((v)->counter) = i)
 
 #include <asm/system.h>

arch/ia64/include/asm/atomic.h

@@ -21,8 +21,8 @@
 #define ATOMIC_INIT(i)		((atomic_t) { (i) })
 #define ATOMIC64_INIT(i)	((atomic64_t) { (i) })
 
-#define atomic_read(v)		((v)->counter)
-#define atomic64_read(v)	((v)->counter)
+#define atomic_read(v)		(*(volatile int *)&(v)->counter)
+#define atomic64_read(v)	(*(volatile long *)&(v)->counter)
 
 #define atomic_set(v,i)		(((v)->counter) = (i))
 #define atomic64_set(v,i)	(((v)->counter) = (i))

arch/ia64/include/asm/bitops.h

@@ -437,17 +437,18 @@ __fls (unsigned long x)
  * hweightN: returns the hamming weight (i.e. the number
  * of bits set) of a N-bit word
  */
-static __inline__ unsigned long
-hweight64 (unsigned long x)
+static __inline__ unsigned long __arch_hweight64(unsigned long x)
 {
 	unsigned long result;
 	result = ia64_popcnt(x);
 	return result;
 }
 
-#define hweight32(x)	(unsigned int) hweight64((x) & 0xfffffffful)
-#define hweight16(x)	(unsigned int) hweight64((x) & 0xfffful)
-#define hweight8(x)	(unsigned int) hweight64((x) & 0xfful)
+#define __arch_hweight32(x) ((unsigned int) __arch_hweight64((x) & 0xfffffffful))
+#define __arch_hweight16(x) ((unsigned int) __arch_hweight64((x) & 0xfffful))
+#define __arch_hweight8(x)  ((unsigned int) __arch_hweight64((x) & 0xfful))
+
+#include <asm-generic/bitops/const_hweight.h>
 
 #endif /* __KERNEL__ */
 

arch/ia64/kernel/acpi.c

@@ -785,6 +785,14 @@ int acpi_gsi_to_irq(u32 gsi, unsigned int *irq)
 	return 0;
 }
 
+int acpi_isa_irq_to_gsi(unsigned isa_irq, u32 *gsi)
+{
+	if (isa_irq >= 16)
+		return -1;
+	*gsi = isa_irq;
+	return 0;
+}
+
 /*
  *  ACPI based hotplug CPU support
  */

arch/m32r/include/asm/atomic.h

@@ -26,7 +26,7 @@
  *
  * Atomically reads the value of @v.
  */
-#define atomic_read(v)	((v)->counter)
+#define atomic_read(v)	(*(volatile int *)&(v)->counter)
 
 /**
  * atomic_set - set atomic variable

arch/m68k/amiga/Makefile

@@ -2,6 +2,6 @@
 # Makefile for Linux arch/m68k/amiga source directory
 #
 
-obj-y		:= config.o amiints.o cia.o chipram.o amisound.o
+obj-y		:= config.o amiints.o cia.o chipram.o amisound.o platform.o
 
 obj-$(CONFIG_AMIGA_PCMCIA)	+= pcmcia.o

arch/m68k/amiga/platform.c

@@ -0,0 +1,83 @@
+/*
+ *  Copyright (C) 2007-2009 Geert Uytterhoeven
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file COPYING in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/zorro.h>
+
+#include <asm/amigahw.h>
+
+
+#ifdef CONFIG_ZORRO
+
+static const struct resource zorro_resources[] __initconst = {
+	/* Zorro II regions (on Zorro II/III) */
+	{
+		.name	= "Zorro II exp",
+		.start	= 0x00e80000,
+		.end	= 0x00efffff,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.name	= "Zorro II mem",
+		.start	= 0x00200000,
+		.end	= 0x009fffff,
+		.flags	= IORESOURCE_MEM,
+	},
+	/* Zorro III regions (on Zorro III only) */
+	{
+		.name	= "Zorro III exp",
+		.start	= 0xff000000,
+		.end	= 0xffffffff,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.name	= "Zorro III cfg",
+		.start	= 0x40000000,
+		.end	= 0x7fffffff,
+		.flags	= IORESOURCE_MEM,
+	}
+};
+
+
+static int __init amiga_init_bus(void)
+{
+	if (!MACH_IS_AMIGA || !AMIGAHW_PRESENT(ZORRO))
+		return -ENODEV;
+
+	platform_device_register_simple("amiga-zorro", -1, zorro_resources,
+					AMIGAHW_PRESENT(ZORRO3) ? 4 : 2);
+	return 0;
+}
+
+subsys_initcall(amiga_init_bus);
+
+#endif /* CONFIG_ZORRO */
+
+
+static int __init amiga_init_devices(void)
+{
+	if (!MACH_IS_AMIGA)
+		return -ENODEV;
+
+	/* video hardware */
+	if (AMIGAHW_PRESENT(AMI_VIDEO))
+		platform_device_register_simple("amiga-video", -1, NULL, 0);
+
+
+	/* sound hardware */
+	if (AMIGAHW_PRESENT(AMI_AUDIO))
+		platform_device_register_simple("amiga-audio", -1, NULL, 0);
+
+
+	/* storage interfaces */
+	if (AMIGAHW_PRESENT(AMI_FLOPPY))
+		platform_device_register_simple("amiga-floppy", -1, NULL, 0);
+
+	return 0;
+}
+
+device_initcall(amiga_init_devices);

arch/m68k/bvme6000/rtc.c

@@ -9,7 +9,6 @@
 #include <linux/types.h>
 #include <linux/errno.h>
 #include <linux/miscdevice.h>
-#include <linux/smp_lock.h>
 #include <linux/ioport.h>
 #include <linux/capability.h>
 #include <linux/fcntl.h>
@@ -35,10 +34,9 @@
 static unsigned char days_in_mo[] =
 {0, 31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31};
 
-static char rtc_status;
+static atomic_t rtc_status = ATOMIC_INIT(1);
 
-static int rtc_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
-		     unsigned long arg)
+static long rtc_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 {
 	volatile RtcPtr_t rtc = (RtcPtr_t)BVME_RTC_BASE;
 	unsigned char msr;
@@ -132,29 +130,20 @@ static int rtc_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
 }
 
 /*
- *	We enforce only one user at a time here with the open/close.
- *	Also clear the previous interrupt data on an open, and clean
- *	up things on a close.
+ * We enforce only one user at a time here with the open/close.
  */
-
 static int rtc_open(struct inode *inode, struct file *file)
 {
-	lock_kernel();
-	if(rtc_status) {
-		unlock_kernel();
+	if (!atomic_dec_and_test(&rtc_status)) {
+		atomic_inc(&rtc_status);
 		return -EBUSY;
 	}
-
-	rtc_status = 1;
-	unlock_kernel();
 	return 0;
 }
 
 static int rtc_release(struct inode *inode, struct file *file)
 {
-	lock_kernel();
-	rtc_status = 0;
-	unlock_kernel();
+	atomic_inc(&rtc_status);
 	return 0;
 }
 
@@ -163,9 +152,9 @@ static int rtc_release(struct inode *inode, struct file *file)
  */
 
 static const struct file_operations rtc_fops = {
-	.ioctl =	rtc_ioctl,
-	.open =		rtc_open,
-	.release =	rtc_release,
+	.unlocked_ioctl	= rtc_ioctl,
+	.open		= rtc_open,
+	.release	= rtc_release,
 };
 
 static struct miscdevice rtc_dev = {

arch/m68k/hp300/time.h

@@ -1,4 +1,2 @@
 extern void hp300_sched_init(irq_handler_t vector);
-extern unsigned long hp300_gettimeoffset (void);
-
-
+extern unsigned long hp300_gettimeoffset(void);

arch/m68k/include/asm/atomic_mm.h

@@ -15,7 +15,7 @@
 
 #define ATOMIC_INIT(i)	{ (i) }
 
-#define atomic_read(v)		((v)->counter)
+#define atomic_read(v)		(*(volatile int *)&(v)->counter)
 #define atomic_set(v, i)	(((v)->counter) = i)
 
 static inline void atomic_add(int i, atomic_t *v)

arch/m68k/include/asm/atomic_no.h

@@ -15,7 +15,7 @@
 
 #define ATOMIC_INIT(i)	{ (i) }
 
-#define atomic_read(v)		((v)->counter)
+#define atomic_read(v)		(*(volatile int *)&(v)->counter)
 #define atomic_set(v, i)	(((v)->counter) = i)
 
 static __inline__ void atomic_add(int i, atomic_t *v)

arch/m68k/include/asm/bitops_mm.h

@@ -365,6 +365,10 @@ static inline int minix_test_bit(int nr, const void *vaddr)
 #define ext2_set_bit_atomic(lock, nr, addr)	test_and_set_bit((nr) ^ 24, (unsigned long *)(addr))
 #define ext2_clear_bit(nr, addr)		__test_and_clear_bit((nr) ^ 24, (unsigned long *)(addr))
 #define ext2_clear_bit_atomic(lock, nr, addr)	test_and_clear_bit((nr) ^ 24, (unsigned long *)(addr))
+#define ext2_find_next_zero_bit(addr, size, offset) \
+	generic_find_next_zero_le_bit((unsigned long *)addr, size, offset)
+#define ext2_find_next_bit(addr, size, offset) \
+	generic_find_next_le_bit((unsigned long *)addr, size, offset)
 
 static inline int ext2_test_bit(int nr, const void *vaddr)
 {
@@ -394,10 +398,9 @@ static inline int ext2_find_first_zero_bit(const void *vaddr, unsigned size)
 	return (p - addr) * 32 + res;
 }
 
-static inline int ext2_find_next_zero_bit(const void *vaddr, unsigned size,
-					  unsigned offset)
+static inline unsigned long generic_find_next_zero_le_bit(const unsigned long *addr,
+		unsigned long size, unsigned long offset)
 {
-	const unsigned long *addr = vaddr;
 	const unsigned long *p = addr + (offset >> 5);
 	int bit = offset & 31UL, res;
 
@@ -437,10 +440,9 @@ static inline int ext2_find_first_bit(const void *vaddr, unsigned size)
 	return (p - addr) * 32 + res;
 }
 
-static inline int ext2_find_next_bit(const void *vaddr, unsigned size,
-				     unsigned offset)
+static inline unsigned long generic_find_next_le_bit(const unsigned long *addr,
+		unsigned long size, unsigned long offset)
 {
-	const unsigned long *addr = vaddr;
 	const unsigned long *p = addr + (offset >> 5);
 	int bit = offset & 31UL, res;
 

arch/m68k/include/asm/param.h

@@ -1,26 +1,12 @@
 #ifndef _M68K_PARAM_H
 #define _M68K_PARAM_H
 
-#ifdef __KERNEL__
-# define HZ		CONFIG_HZ	/* Internal kernel timer frequency */
-# define USER_HZ	100		/* .. some user interfaces are in "ticks" */
-# define CLOCKS_PER_SEC	(USER_HZ)	/* like times() */
-#endif
-
-#ifndef HZ
-#define HZ 100
-#endif
-
 #ifdef __uClinux__
 #define EXEC_PAGESIZE	4096
 #else
 #define EXEC_PAGESIZE	8192
 #endif
 
-#ifndef NOGROUP
-#define NOGROUP		(-1)
-#endif
-
-#define MAXHOSTNAMELEN	64	/* max length of hostname */
+#include <asm-generic/param.h>
 
 #endif /* _M68K_PARAM_H */

arch/m68k/kernel/traps.c

@@ -455,7 +455,7 @@ static inline void access_error040(struct frame *fp)
 
 		if (do_page_fault(&fp->ptregs, addr, errorcode)) {
 #ifdef DEBUG
-		        printk("do_page_fault() !=0 \n");
+			printk("do_page_fault() !=0\n");
 #endif
 			if (user_mode(&fp->ptregs)){
 				/* delay writebacks after signal delivery */

arch/m68k/mac/config.c

@@ -148,7 +148,7 @@ static void mac_cache_card_flush(int writeback)
 void __init config_mac(void)
 {
 	if (!MACH_IS_MAC)
-		printk(KERN_ERR "ERROR: no Mac, but config_mac() called!! \n");
+		printk(KERN_ERR "ERROR: no Mac, but config_mac() called!!\n");
 
 	mach_sched_init = mac_sched_init;
 	mach_init_IRQ = mac_init_IRQ;
@@ -867,7 +867,7 @@ static void __init mac_identify(void)
 	 */
 	iop_preinit();
 
-	printk(KERN_INFO "Detected Macintosh model: %d \n", model);
+	printk(KERN_INFO "Detected Macintosh model: %d\n", model);
 
 	/*
 	 * Report booter data:
@@ -878,12 +878,12 @@ static void __init mac_identify(void)
 		mac_bi_data.videoaddr, mac_bi_data.videorow,
 		mac_bi_data.videodepth, mac_bi_data.dimensions & 0xFFFF,
 		mac_bi_data.dimensions >> 16);
-	printk(KERN_DEBUG " Videological 0x%lx phys. 0x%lx, SCC at 0x%lx \n",
+	printk(KERN_DEBUG " Videological 0x%lx phys. 0x%lx, SCC at 0x%lx\n",
 		mac_bi_data.videological, mac_orig_videoaddr,
 		mac_bi_data.sccbase);
-	printk(KERN_DEBUG " Boottime: 0x%lx GMTBias: 0x%lx \n",
+	printk(KERN_DEBUG " Boottime: 0x%lx GMTBias: 0x%lx\n",
 		mac_bi_data.boottime, mac_bi_data.gmtbias);
-	printk(KERN_DEBUG " Machine ID: %ld CPUid: 0x%lx memory size: 0x%lx \n",
+	printk(KERN_DEBUG " Machine ID: %ld CPUid: 0x%lx memory size: 0x%lx\n",
 		mac_bi_data.id, mac_bi_data.cpuid, mac_bi_data.memsize);
 
 	iop_init();

arch/m68k/mm/fault.c

@@ -154,7 +154,6 @@ good_area:
 	 * the fault.
 	 */
 
- survive:
 	fault = handle_mm_fault(mm, vma, address, write ? FAULT_FLAG_WRITE : 0);
 #ifdef DEBUG
 	printk("handle_mm_fault returns %d\n",fault);
@@ -180,15 +179,10 @@ good_area:
  */
 out_of_memory:
 	up_read(&mm->mmap_sem);
-	if (is_global_init(current)) {
-		yield();
-		down_read(&mm->mmap_sem);
-		goto survive;
-	}
-
-	printk("VM: killing process %s\n", current->comm);
-	if (user_mode(regs))
-		do_group_exit(SIGKILL);
+	if (!user_mode(regs))
+		goto no_context;
+	pagefault_out_of_memory();
+	return 0;
 
 no_context:
 	current->thread.signo = SIGBUS;

arch/m68k/mvme16x/rtc.c

@@ -9,7 +9,6 @@
 #include <linux/types.h>
 #include <linux/errno.h>
 #include <linux/miscdevice.h>
-#include <linux/smp_lock.h>
 #include <linux/ioport.h>
 #include <linux/capability.h>
 #include <linux/fcntl.h>
@@ -36,8 +35,7 @@ static const unsigned char days_in_mo[] =
 
 static atomic_t rtc_ready = ATOMIC_INIT(1);
 
-static int rtc_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
-		     unsigned long arg)
+static long rtc_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 {
 	volatile MK48T08ptr_t rtc = (MK48T08ptr_t)MVME_RTC_BASE;
 	unsigned long flags;
@@ -120,22 +118,15 @@ static int rtc_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
 }
 
 /*
- *	We enforce only one user at a time here with the open/close.
- *	Also clear the previous interrupt data on an open, and clean
- *	up things on a close.
+ * We enforce only one user at a time here with the open/close.
  */
-
 static int rtc_open(struct inode *inode, struct file *file)
 {
-	lock_kernel();
 	if( !atomic_dec_and_test(&rtc_ready) )
 	{
 		atomic_inc( &rtc_ready );
-		unlock_kernel();
 		return -EBUSY;
 	}
-	unlock_kernel();
-
 	return 0;
 }
 
@@ -150,9 +141,9 @@ static int rtc_release(struct inode *inode, struct file *file)
  */
 
 static const struct file_operations rtc_fops = {
-	.ioctl =	rtc_ioctl,
-	.open =		rtc_open,
-	.release =	rtc_release,
+	.unlocked_ioctl	= rtc_ioctl,
+	.open		= rtc_open,
+	.release	= rtc_release,
 };
 
 static struct miscdevice rtc_dev=

arch/m68k/q40/config.c

@@ -126,7 +126,7 @@ static void q40_reset(void)
 {
         halted = 1;
         printk("\n\n*******************************************\n"
-		"Called q40_reset : press the RESET button!! \n"
+		"Called q40_reset : press the RESET button!!\n"
 		"*******************************************\n");
 	Q40_LED_ON();
 	while (1)

arch/microblaze/include/asm/uaccess.h

@@ -182,6 +182,39 @@ extern long __user_bad(void);
  * Returns zero on success, or -EFAULT on error.
  * On error, the variable @x is set to zero.
  */
+#define get_user(x, ptr)						\
+	__get_user_check((x), (ptr), sizeof(*(ptr)))
+
+#define __get_user_check(x, ptr, size)					\
+({									\
+	unsigned long __gu_val = 0;					\
+	const typeof(*(ptr)) __user *__gu_addr = (ptr);			\
+	int __gu_err = 0;						\
+									\
+	if (access_ok(VERIFY_READ, __gu_addr, size)) {			\
+		switch (size) {						\
+		case 1:							\
+			__get_user_asm("lbu", __gu_addr, __gu_val,	\
+				       __gu_err);			\
+			break;						\
+		case 2:							\
+			__get_user_asm("lhu", __gu_addr, __gu_val,	\
+				       __gu_err);			\
+			break;						\
+		case 4:							\
+			__get_user_asm("lw", __gu_addr, __gu_val,	\
+				       __gu_err);			\
+			break;						\
+		default:						\
+			__gu_err = __user_bad();			\
+			break;						\
+		}							\
+	} else {							\
+		__gu_err = -EFAULT;					\
+	}								\
+	x = (typeof(*(ptr)))__gu_val;					\
+	__gu_err;							\
+})
 
 #define __get_user(x, ptr)						\
 ({									\
@@ -206,12 +239,6 @@ extern long __user_bad(void);
 })
 
 
-#define get_user(x, ptr)						\
-({									\
-	access_ok(VERIFY_READ, (ptr), sizeof(*(ptr)))			\
-		? __get_user((x), (ptr)) : -EFAULT;			\
-})
-
 #define __put_user_asm(insn, __gu_ptr, __gu_val, __gu_err)	\
 ({								\
 	__asm__ __volatile__ (					\
@@ -266,6 +293,42 @@ extern long __user_bad(void);
  *
  * Returns zero on success, or -EFAULT on error.
  */
+#define put_user(x, ptr)						\
+	__put_user_check((x), (ptr), sizeof(*(ptr)))
+
+#define __put_user_check(x, ptr, size)					\
+({									\
+	typeof(*(ptr)) __pu_val;					\
+	typeof(*(ptr)) __user *__pu_addr = (ptr);			\
+	int __pu_err = 0;						\
+									\
+	__pu_val = (x);							\
+	if (access_ok(VERIFY_WRITE, __pu_addr, size)) {			\
+		switch (size) {						\
+		case 1:							\
+			__put_user_asm("sb", __pu_addr, __pu_val,	\
+				       __pu_err);			\
+			break;						\
+		case 2:							\
+			__put_user_asm("sh", __pu_addr, __pu_val,	\
+				       __pu_err);			\
+			break;						\
+		case 4:							\
+			__put_user_asm("sw", __pu_addr, __pu_val,	\
+				       __pu_err);			\
+			break;						\
+		case 8:							\
+			__put_user_asm_8(__pu_addr, __pu_val, __pu_err);\
+			break;						\
+		default:						\
+			__pu_err = __user_bad();			\
+			break;						\
+		}							\
+	} else {							\
+		__pu_err = -EFAULT;					\
+	}								\
+	__pu_err;							\
+})
 
 #define __put_user(x, ptr)						\
 ({									\
@@ -290,18 +353,6 @@ extern long __user_bad(void);
 	__gu_err;							\
 })
 
-#ifndef CONFIG_MMU
-
-#define put_user(x, ptr)	__put_user((x), (ptr))
-
-#else /* CONFIG_MMU */
-
-#define put_user(x, ptr)						\
-({									\
-	access_ok(VERIFY_WRITE, (ptr), sizeof(*(ptr)))			\
-		? __put_user((x), (ptr)) : -EFAULT;			\
-})
-#endif /* CONFIG_MMU */
 
 /* copy_to_from_user */
 #define __copy_from_user(to, from, n)	\

arch/microblaze/kernel/cpu/cache.c

@@ -137,8 +137,9 @@ do {									\
 do {									\
 	int step = -line_length;					\
 	int align = ~(line_length - 1);					\
+	int count;							\
 	end = ((end & align) == end) ? end - line_length : end & align;	\
-	int count = end - start;					\
+	count = end - start;						\
 	WARN_ON(count < 0);						\
 									\
 	__asm__ __volatile__ (" 1:	" #op "	%0, %1;			\

arch/microblaze/kernel/entry-nommu.S

@@ -476,6 +476,8 @@ ENTRY(ret_from_fork)
 	nop
 
 work_pending:
+	enable_irq
+
 	andi	r11, r19, _TIF_NEED_RESCHED
 	beqi	r11, 1f
 	bralid	r15, schedule

arch/microblaze/kernel/microblaze_ksyms.c

@@ -52,3 +52,14 @@ EXPORT_SYMBOL_GPL(_ebss);
 extern void _mcount(void);
 EXPORT_SYMBOL(_mcount);
 #endif
+
+/*
+ * Assembly functions that may be used (directly or indirectly) by modules
+ */
+EXPORT_SYMBOL(__copy_tofrom_user);
+EXPORT_SYMBOL(__strncpy_user);
+
+#ifdef CONFIG_OPT_LIB_ASM
+EXPORT_SYMBOL(memcpy);
+EXPORT_SYMBOL(memmove);
+#endif

arch/microblaze/kernel/module.c

@@ -16,6 +16,7 @@
 #include <linux/string.h>
 
 #include <asm/pgtable.h>
+#include <asm/cacheflush.h>
 
 void *module_alloc(unsigned long size)
 {
@@ -151,6 +152,7 @@ int apply_relocate_add(Elf32_Shdr *sechdrs, const char *strtab,
 int module_finalize(const Elf32_Ehdr *hdr, const Elf_Shdr *sechdrs,
 		struct module *module)
 {
+	flush_dcache();
 	return 0;
 }
 

arch/microblaze/mm/init.c

@@ -47,6 +47,7 @@ unsigned long memory_start;
 EXPORT_SYMBOL(memory_start);
 unsigned long memory_end; /* due to mm/nommu.c */
 unsigned long memory_size;
+EXPORT_SYMBOL(memory_size);
 
 /*
  * paging_init() sets up the page tables - in fact we've already done this.

arch/microblaze/mm/pgtable.c

@@ -42,6 +42,7 @@
 
 unsigned long ioremap_base;
 unsigned long ioremap_bot;
+EXPORT_SYMBOL(ioremap_bot);
 
 /* The maximum lowmem defaults to 768Mb, but this can be configured to
  * another value.

arch/microblaze/pci/pci-common.c

@@ -1507,7 +1507,7 @@ void pcibios_finish_adding_to_bus(struct pci_bus *bus)
 	pci_bus_add_devices(bus);
 
 	/* Fixup EEH */
-	eeh_add_device_tree_late(bus);
+	/* eeh_add_device_tree_late(bus); */
 }
 EXPORT_SYMBOL_GPL(pcibios_finish_adding_to_bus);
 

arch/mips/include/asm/atomic.h

@@ -29,7 +29,7 @@
  *
  * Atomically reads the value of @v.
  */
-#define atomic_read(v)		((v)->counter)
+#define atomic_read(v)		(*(volatile int *)&(v)->counter)
 
 /*
  * atomic_set - set atomic variable
@@ -410,7 +410,7 @@ static __inline__ int atomic_add_unless(atomic_t *v, int a, int u)
  * @v: pointer of type atomic64_t
  *
  */
-#define atomic64_read(v)	((v)->counter)
+#define atomic64_read(v)	(*(volatile long *)&(v)->counter)
 
 /*
  * atomic64_set - set atomic variable

arch/mips/include/asm/i8253.h

@@ -12,7 +12,7 @@
 #define PIT_CH0			0x40
 #define PIT_CH2			0x42
 
-extern spinlock_t i8253_lock;
+extern raw_spinlock_t i8253_lock;
 
 extern void setup_pit_timer(void);
 

arch/mips/include/asm/mipsregs.h

@@ -134,6 +134,12 @@
 #define FPU_CSR_COND6   0x40000000      /* $fcc6 */
 #define FPU_CSR_COND7   0x80000000      /* $fcc7 */
 
+/*
+ * Bits 18 - 20 of the FPU Status Register will be read as 0,
+ * and should be written as zero.
+ */
+#define FPU_CSR_RSVD	0x001c0000
+
 /*
  * X the exception cause indicator
  * E the exception enable
@@ -161,7 +167,8 @@
 #define FPU_CSR_UDF_S   0x00000008
 #define FPU_CSR_INE_S   0x00000004
 
-/* rounding mode */
+/* Bits 0 and 1 of FPU Status Register specify the rounding mode */
+#define FPU_CSR_RM	0x00000003
 #define FPU_CSR_RN      0x0     /* nearest */
 #define FPU_CSR_RZ      0x1     /* towards zero */
 #define FPU_CSR_RU      0x2     /* towards +Infinity */

arch/mips/kernel/i8253.c

@@ -15,7 +15,7 @@
 #include <asm/io.h>
 #include <asm/time.h>
 
-DEFINE_SPINLOCK(i8253_lock);
+DEFINE_RAW_SPINLOCK(i8253_lock);
 EXPORT_SYMBOL(i8253_lock);
 
 /*
@@ -26,7 +26,7 @@ EXPORT_SYMBOL(i8253_lock);
 static void init_pit_timer(enum clock_event_mode mode,
 			   struct clock_event_device *evt)
 {
-	spin_lock(&i8253_lock);
+	raw_spin_lock(&i8253_lock);
 
 	switch(mode) {
 	case CLOCK_EVT_MODE_PERIODIC:
@@ -55,7 +55,7 @@ static void init_pit_timer(enum clock_event_mode mode,
 		/* Nothing to do here */
 		break;
 	}
-	spin_unlock(&i8253_lock);
+	raw_spin_unlock(&i8253_lock);
 }
 
 /*
@@ -65,10 +65,10 @@ static void init_pit_timer(enum clock_event_mode mode,
  */
 static int pit_next_event(unsigned long delta, struct clock_event_device *evt)
 {
-	spin_lock(&i8253_lock);
+	raw_spin_lock(&i8253_lock);
 	outb_p(delta & 0xff , PIT_CH0);	/* LSB */
 	outb(delta >> 8 , PIT_CH0);	/* MSB */
-	spin_unlock(&i8253_lock);
+	raw_spin_unlock(&i8253_lock);
 
 	return 0;
 }
@@ -137,7 +137,7 @@ static cycle_t pit_read(struct clocksource *cs)
 	static int old_count;
 	static u32 old_jifs;
 
-	spin_lock_irqsave(&i8253_lock, flags);
+	raw_spin_lock_irqsave(&i8253_lock, flags);
 	/*
 	 * Although our caller may have the read side of xtime_lock,
 	 * this is now a seqlock, and we are cheating in this routine
@@ -183,7 +183,7 @@ static cycle_t pit_read(struct clocksource *cs)
 	old_count = count;
 	old_jifs = jifs;
 
-	spin_unlock_irqrestore(&i8253_lock, flags);
+	raw_spin_unlock_irqrestore(&i8253_lock, flags);
 
 	count = (LATCH - 1) - count;
 

arch/mips/kernel/scall64-n32.S

@@ -385,7 +385,7 @@ EXPORT(sysn32_call_table)
 	PTR	sys_fchmodat
 	PTR	sys_faccessat
 	PTR	compat_sys_pselect6
-	PTR	sys_ppoll			/* 6265 */
+	PTR	compat_sys_ppoll		/* 6265 */
 	PTR	sys_unshare
 	PTR	sys_splice
 	PTR	sys_sync_file_range

arch/mips/math-emu/cp1emu.c

@@ -78,6 +78,9 @@ DEFINE_PER_CPU(struct mips_fpu_emulator_stats, fpuemustats);
 #define FPCREG_RID	0	/* $0  = revision id */
 #define FPCREG_CSR	31	/* $31 = csr */
 
+/* Determine rounding mode from the RM bits of the FCSR */
+#define modeindex(v) ((v) & FPU_CSR_RM)
+
 /* Convert Mips rounding mode (0..3) to IEEE library modes. */
 static const unsigned char ieee_rm[4] = {
 	[FPU_CSR_RN] = IEEE754_RN,
@@ -384,10 +387,14 @@ static int cop1Emulate(struct pt_regs *xcp, struct mips_fpu_struct *ctx)
 					(void *) (xcp->cp0_epc),
 					MIPSInst_RT(ir), value);
 #endif
-				value &= (FPU_CSR_FLUSH | FPU_CSR_ALL_E | FPU_CSR_ALL_S | 0x03);
-				ctx->fcr31 &= ~(FPU_CSR_FLUSH | FPU_CSR_ALL_E | FPU_CSR_ALL_S | 0x03);
-				/* convert to ieee library modes */
-				ctx->fcr31 |= (value & ~0x3) | ieee_rm[value & 0x3];
+
+				/*
+				 * Don't write reserved bits,
+				 * and convert to ieee library modes
+				 */
+				ctx->fcr31 = (value &
+						~(FPU_CSR_RSVD | FPU_CSR_RM)) |
+						ieee_rm[modeindex(value)];
 			}
 			if ((ctx->fcr31 >> 5) & ctx->fcr31 & FPU_CSR_ALL_E) {
 				return SIGFPE;

arch/mips/oprofile/op_model_loongson2.c

@@ -122,7 +122,7 @@ static irqreturn_t loongson2_perfcount_handler(int irq, void *dev_id)
 	 */
 
 	/* Check whether the irq belongs to me */
-	enabled = read_c0_perfcnt() & LOONGSON2_PERFCNT_INT_EN;
+	enabled = read_c0_perfctrl() & LOONGSON2_PERFCNT_INT_EN;
 	if (!enabled)
 		return IRQ_NONE;
 	enabled = reg.cnt1_enabled | reg.cnt2_enabled;

arch/mn10300/include/asm/atomic.h

@@ -31,7 +31,7 @@
  * Atomically reads the value of @v.  Note that the guaranteed
  * useful range of an atomic_t is only 24 bits.
  */
-#define atomic_read(v)	((v)->counter)
+#define atomic_read(v)	(*(volatile int *)&(v)->counter)
 
 /**
  * atomic_set - set atomic variable

arch/parisc/include/asm/atomic.h

@@ -189,7 +189,7 @@ static __inline__ void atomic_set(atomic_t *v, int i)
 
 static __inline__ int atomic_read(const atomic_t *v)
 {
-	return v->counter;
+	return (*(volatile int *)&(v)->counter);
 }
 
 /* exported interface */
@@ -286,7 +286,7 @@ atomic64_set(atomic64_t *v, s64 i)
 static __inline__ s64
 atomic64_read(const atomic64_t *v)
 {
-	return v->counter;
+	return (*(volatile long *)&(v)->counter);
 }
 
 #define atomic64_add(i,v)	((void)(__atomic64_add_return( ((s64)(i)),(v))))

arch/powerpc/include/asm/hw_irq.h

@@ -130,43 +130,5 @@ static inline int irqs_disabled_flags(unsigned long flags)
  */
 struct irq_chip;
 
-#ifdef CONFIG_PERF_EVENTS
-
-#ifdef CONFIG_PPC64
-static inline unsigned long test_perf_event_pending(void)
-{
-	unsigned long x;
-
-	asm volatile("lbz %0,%1(13)"
-		: "=r" (x)
-		: "i" (offsetof(struct paca_struct, perf_event_pending)));
-	return x;
-}
-
-static inline void set_perf_event_pending(void)
-{
-	asm volatile("stb %0,%1(13)" : :
-		"r" (1),
-		"i" (offsetof(struct paca_struct, perf_event_pending)));
-}
-
-static inline void clear_perf_event_pending(void)
-{
-	asm volatile("stb %0,%1(13)" : :
-		"r" (0),
-		"i" (offsetof(struct paca_struct, perf_event_pending)));
-}
-#endif /* CONFIG_PPC64 */
-
-#else  /* CONFIG_PERF_EVENTS */
-
-static inline unsigned long test_perf_event_pending(void)
-{
-	return 0;
-}
-
-static inline void clear_perf_event_pending(void) {}
-#endif /* CONFIG_PERF_EVENTS */
-
 #endif	/* __KERNEL__ */
 #endif	/* _ASM_POWERPC_HW_IRQ_H */

arch/powerpc/kernel/asm-offsets.c

@@ -133,7 +133,6 @@ int main(void)
 	DEFINE(PACAKMSR, offsetof(struct paca_struct, kernel_msr));
 	DEFINE(PACASOFTIRQEN, offsetof(struct paca_struct, soft_enabled));
 	DEFINE(PACAHARDIRQEN, offsetof(struct paca_struct, hard_enabled));
-	DEFINE(PACAPERFPEND, offsetof(struct paca_struct, perf_event_pending));
 	DEFINE(PACACONTEXTID, offsetof(struct paca_struct, context.id));
 #ifdef CONFIG_PPC_MM_SLICES
 	DEFINE(PACALOWSLICESPSIZE, offsetof(struct paca_struct,

arch/powerpc/kernel/dma-swiotlb.c

@@ -1,7 +1,8 @@
 /*
  * Contains routines needed to support swiotlb for ppc.
  *
- * Copyright (C) 2009 Becky Bruce, Freescale Semiconductor
+ * Copyright (C) 2009-2010 Freescale Semiconductor, Inc.
+ * Author: Becky Bruce
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
@@ -70,7 +71,7 @@ static int ppc_swiotlb_bus_notify(struct notifier_block *nb,
 	sd->max_direct_dma_addr = 0;
 
 	/* May need to bounce if the device can't address all of DRAM */
-	if (dma_get_mask(dev) < lmb_end_of_DRAM())
+	if ((dma_get_mask(dev) + 1) < lmb_end_of_DRAM())
 		set_dma_ops(dev, &swiotlb_dma_ops);
 
 	return NOTIFY_DONE;

arch/powerpc/kernel/entry_64.S

@@ -556,15 +556,6 @@ ALT_FW_FTR_SECTION_END_IFCLR(FW_FEATURE_ISERIES)
 2:
 	TRACE_AND_RESTORE_IRQ(r5);
 
-#ifdef CONFIG_PERF_EVENTS
-	/* check paca->perf_event_pending if we're enabling ints */
-	lbz	r3,PACAPERFPEND(r13)
-	and.	r3,r3,r5
-	beq	27f
-	bl	.perf_event_do_pending
-27:
-#endif /* CONFIG_PERF_EVENTS */
-
 	/* extract EE bit and use it to restore paca->hard_enabled */
 	ld	r3,_MSR(r1)
 	rldicl	r4,r3,49,63		/* r0 = (r3 >> 15) & 1 */

arch/powerpc/kernel/irq.c

@@ -53,7 +53,6 @@
 #include <linux/bootmem.h>
 #include <linux/pci.h>
 #include <linux/debugfs.h>
-#include <linux/perf_event.h>
 
 #include <asm/uaccess.h>
 #include <asm/system.h>
@@ -145,11 +144,6 @@ notrace void raw_local_irq_restore(unsigned long en)
 	}
 #endif /* CONFIG_PPC_STD_MMU_64 */
 
-	if (test_perf_event_pending()) {
-		clear_perf_event_pending();
-		perf_event_do_pending();
-	}
-
 	/*
 	 * if (get_paca()->hard_enabled) return;
 	 * But again we need to take care that gcc gets hard_enabled directly

arch/powerpc/kernel/perf_event.c

@@ -35,6 +35,9 @@ struct cpu_hw_events {
 	u64 alternatives[MAX_HWEVENTS][MAX_EVENT_ALTERNATIVES];
 	unsigned long amasks[MAX_HWEVENTS][MAX_EVENT_ALTERNATIVES];
 	unsigned long avalues[MAX_HWEVENTS][MAX_EVENT_ALTERNATIVES];
+
+	unsigned int group_flag;
+	int n_txn_start;
 };
 DEFINE_PER_CPU(struct cpu_hw_events, cpu_hw_events);
 
@@ -718,66 +721,6 @@ static int collect_events(struct perf_event *group, int max_count,
 	return n;
 }
 
-static void event_sched_in(struct perf_event *event)
-{
-	event->state = PERF_EVENT_STATE_ACTIVE;
-	event->oncpu = smp_processor_id();
-	event->tstamp_running += event->ctx->time - event->tstamp_stopped;
-	if (is_software_event(event))
-		event->pmu->enable(event);
-}
-
-/*
- * Called to enable a whole group of events.
- * Returns 1 if the group was enabled, or -EAGAIN if it could not be.
- * Assumes the caller has disabled interrupts and has
- * frozen the PMU with hw_perf_save_disable.
- */
-int hw_perf_group_sched_in(struct perf_event *group_leader,
-	       struct perf_cpu_context *cpuctx,
-	       struct perf_event_context *ctx)
-{
-	struct cpu_hw_events *cpuhw;
-	long i, n, n0;
-	struct perf_event *sub;
-
-	if (!ppmu)
-		return 0;
-	cpuhw = &__get_cpu_var(cpu_hw_events);
-	n0 = cpuhw->n_events;
-	n = collect_events(group_leader, ppmu->n_counter - n0,
-			   &cpuhw->event[n0], &cpuhw->events[n0],
-			   &cpuhw->flags[n0]);
-	if (n < 0)
-		return -EAGAIN;
-	if (check_excludes(cpuhw->event, cpuhw->flags, n0, n))
-		return -EAGAIN;
-	i = power_check_constraints(cpuhw, cpuhw->events, cpuhw->flags, n + n0);
-	if (i < 0)
-		return -EAGAIN;
-	cpuhw->n_events = n0 + n;
-	cpuhw->n_added += n;
-
-	/*
-	 * OK, this group can go on; update event states etc.,
-	 * and enable any software events
-	 */
-	for (i = n0; i < n0 + n; ++i)
-		cpuhw->event[i]->hw.config = cpuhw->events[i];
-	cpuctx->active_oncpu += n;
-	n = 1;
-	event_sched_in(group_leader);
-	list_for_each_entry(sub, &group_leader->sibling_list, group_entry) {
-		if (sub->state != PERF_EVENT_STATE_OFF) {
-			event_sched_in(sub);
-			++n;
-		}
-	}
-	ctx->nr_active += n;
-
-	return 1;
-}
-
 /*
  * Add a event to the PMU.
  * If all events are not already frozen, then we disable and
@@ -805,12 +748,22 @@ static int power_pmu_enable(struct perf_event *event)
 	cpuhw->event[n0] = event;
 	cpuhw->events[n0] = event->hw.config;
 	cpuhw->flags[n0] = event->hw.event_base;
+
+	/*
+	 * If group events scheduling transaction was started,
+	 * skip the schedulability test here, it will be peformed
+	 * at commit time(->commit_txn) as a whole
+	 */
+	if (cpuhw->group_flag & PERF_EVENT_TXN_STARTED)
+		goto nocheck;
+
 	if (check_excludes(cpuhw->event, cpuhw->flags, n0, 1))
 		goto out;
 	if (power_check_constraints(cpuhw, cpuhw->events, cpuhw->flags, n0 + 1))
 		goto out;
-
 	event->hw.config = cpuhw->events[n0];
+
+nocheck:
 	++cpuhw->n_events;
 	++cpuhw->n_added;
 
@@ -896,11 +849,65 @@ static void power_pmu_unthrottle(struct perf_event *event)
 	local_irq_restore(flags);
 }
 
+/*
+ * Start group events scheduling transaction
+ * Set the flag to make pmu::enable() not perform the
+ * schedulability test, it will be performed at commit time
+ */
+void power_pmu_start_txn(const struct pmu *pmu)
+{
+	struct cpu_hw_events *cpuhw = &__get_cpu_var(cpu_hw_events);
+
+	cpuhw->group_flag |= PERF_EVENT_TXN_STARTED;
+	cpuhw->n_txn_start = cpuhw->n_events;
+}
+
+/*
+ * Stop group events scheduling transaction
+ * Clear the flag and pmu::enable() will perform the
+ * schedulability test.
+ */
+void power_pmu_cancel_txn(const struct pmu *pmu)
+{
+	struct cpu_hw_events *cpuhw = &__get_cpu_var(cpu_hw_events);
+
+	cpuhw->group_flag &= ~PERF_EVENT_TXN_STARTED;
+}
+
+/*
+ * Commit group events scheduling transaction
+ * Perform the group schedulability test as a whole
+ * Return 0 if success
+ */
+int power_pmu_commit_txn(const struct pmu *pmu)
+{
+	struct cpu_hw_events *cpuhw;
+	long i, n;
+
+	if (!ppmu)
+		return -EAGAIN;
+	cpuhw = &__get_cpu_var(cpu_hw_events);
+	n = cpuhw->n_events;
+	if (check_excludes(cpuhw->event, cpuhw->flags, 0, n))
+		return -EAGAIN;
+	i = power_check_constraints(cpuhw, cpuhw->events, cpuhw->flags, n);
+	if (i < 0)
+		return -EAGAIN;
+
+	for (i = cpuhw->n_txn_start; i < n; ++i)
+		cpuhw->event[i]->hw.config = cpuhw->events[i];
+
+	return 0;
+}
+
 struct pmu power_pmu = {
 	.enable		= power_pmu_enable,
 	.disable	= power_pmu_disable,
 	.read		= power_pmu_read,
 	.unthrottle	= power_pmu_unthrottle,
+	.start_txn	= power_pmu_start_txn,
+	.cancel_txn	= power_pmu_cancel_txn,
+	.commit_txn	= power_pmu_commit_txn,
 };
 
 /*

arch/powerpc/kernel/time.c

@@ -532,25 +532,60 @@ void __init iSeries_time_init_early(void)
 }
 #endif /* CONFIG_PPC_ISERIES */
 
-#if defined(CONFIG_PERF_EVENTS) && defined(CONFIG_PPC32)
-DEFINE_PER_CPU(u8, perf_event_pending);
+#ifdef CONFIG_PERF_EVENTS
 
-void set_perf_event_pending(void)
+/*
+ * 64-bit uses a byte in the PACA, 32-bit uses a per-cpu variable...
+ */
+#ifdef CONFIG_PPC64
+static inline unsigned long test_perf_event_pending(void)
 {
-	get_cpu_var(perf_event_pending) = 1;
-	set_dec(1);
-	put_cpu_var(perf_event_pending);
+	unsigned long x;
+
+	asm volatile("lbz %0,%1(13)"
+		: "=r" (x)
+		: "i" (offsetof(struct paca_struct, perf_event_pending)));
+	return x;
 }
 
+static inline void set_perf_event_pending_flag(void)
+{
+	asm volatile("stb %0,%1(13)" : :
+		"r" (1),
+		"i" (offsetof(struct paca_struct, perf_event_pending)));
+}
+
+static inline void clear_perf_event_pending(void)
+{
+	asm volatile("stb %0,%1(13)" : :
+		"r" (0),
+		"i" (offsetof(struct paca_struct, perf_event_pending)));
+}
+
+#else /* 32-bit */
+
+DEFINE_PER_CPU(u8, perf_event_pending);
+
+#define set_perf_event_pending_flag()	__get_cpu_var(perf_event_pending) = 1
 #define test_perf_event_pending()	__get_cpu_var(perf_event_pending)
 #define clear_perf_event_pending()	__get_cpu_var(perf_event_pending) = 0
 
-#else  /* CONFIG_PERF_EVENTS && CONFIG_PPC32 */
+#endif /* 32 vs 64 bit */
+
+void set_perf_event_pending(void)
+{
+	preempt_disable();
+	set_perf_event_pending_flag();
+	set_dec(1);
+	preempt_enable();
+}
+
+#else  /* CONFIG_PERF_EVENTS */
 
 #define test_perf_event_pending()	0
 #define clear_perf_event_pending()
 
-#endif /* CONFIG_PERF_EVENTS && CONFIG_PPC32 */
+#endif /* CONFIG_PERF_EVENTS */
 
 /*
  * For iSeries shared processors, we have to let the hypervisor
@@ -582,10 +617,6 @@ void timer_interrupt(struct pt_regs * regs)
 	set_dec(DECREMENTER_MAX);
 
 #ifdef CONFIG_PPC32
-	if (test_perf_event_pending()) {
-		clear_perf_event_pending();
-		perf_event_do_pending();
-	}
 	if (atomic_read(&ppc_n_lost_interrupts) != 0)
 		do_IRQ(regs);
 #endif
@@ -604,6 +635,11 @@ void timer_interrupt(struct pt_regs * regs)
 
 	calculate_steal_time();
 
+	if (test_perf_event_pending()) {
+		clear_perf_event_pending();
+		perf_event_do_pending();
+	}
+
 #ifdef CONFIG_PPC_ISERIES
 	if (firmware_has_feature(FW_FEATURE_ISERIES))
 		get_lppaca()->int_dword.fields.decr_int = 0;

arch/powerpc/kvm/44x_tlb.c

@@ -440,7 +440,7 @@ int kvmppc_44x_emul_tlbwe(struct kvm_vcpu *vcpu, u8 ra, u8 rs, u8 ws)
 	unsigned int gtlb_index;
 
 	gtlb_index = kvmppc_get_gpr(vcpu, ra);
-	if (gtlb_index > KVM44x_GUEST_TLB_SIZE) {
+	if (gtlb_index >= KVM44x_GUEST_TLB_SIZE) {
 		printk("%s: index %d\n", __func__, gtlb_index);
 		kvmppc_dump_vcpu(vcpu);
 		return EMULATE_FAIL;

arch/s390/kernel/head31.S

@@ -82,7 +82,7 @@ startup_continue:
 _ehead:
 
 #ifdef CONFIG_SHARED_KERNEL
-	.org	0x100000
+	.org	0x100000 - 0x11000	# head.o ends at 0x11000
 #endif
 
 #

arch/s390/kernel/head64.S

@@ -80,7 +80,7 @@ startup_continue:
 _ehead:
 
 #ifdef CONFIG_SHARED_KERNEL
-	.org	0x100000
+	.org	0x100000 - 0x11000	# head.o ends at 0x11000
 #endif
 
 #

arch/s390/kernel/ptrace.c

@@ -640,7 +640,7 @@ long compat_arch_ptrace(struct task_struct *child, compat_long_t request,
 
 asmlinkage long do_syscall_trace_enter(struct pt_regs *regs)
 {
-	long ret;
+	long ret = 0;
 
 	/* Do the secure computing check first. */
 	secure_computing(regs->gprs[2]);
@@ -649,7 +649,6 @@ asmlinkage long do_syscall_trace_enter(struct pt_regs *regs)
 	 * The sysc_tracesys code in entry.S stored the system
 	 * call number to gprs[2].
 	 */
-	ret = regs->gprs[2];
 	if (test_thread_flag(TIF_SYSCALL_TRACE) &&
 	    (tracehook_report_syscall_entry(regs) ||
 	     regs->gprs[2] >= NR_syscalls)) {
@@ -671,7 +670,7 @@ asmlinkage long do_syscall_trace_enter(struct pt_regs *regs)
 				    regs->gprs[2], regs->orig_gpr2,
 				    regs->gprs[3], regs->gprs[4],
 				    regs->gprs[5]);
-	return ret;
+	return ret ?: regs->gprs[2];
 }
 
 asmlinkage void do_syscall_trace_exit(struct pt_regs *regs)

arch/s390/kernel/time.c

@@ -391,7 +391,6 @@ static void __init time_init_wq(void)
 	if (time_sync_wq)
 		return;
 	time_sync_wq = create_singlethread_workqueue("timesync");
-	stop_machine_create();
 }
 
 /*

arch/sh/Kconfig

@@ -44,6 +44,7 @@ config SUPERH32
 	select HAVE_FUNCTION_GRAPH_TRACER
 	select HAVE_ARCH_KGDB
 	select HAVE_HW_BREAKPOINT
+	select HAVE_MIXED_BREAKPOINTS_REGS
 	select PERF_EVENTS if HAVE_HW_BREAKPOINT
 	select ARCH_HIBERNATION_POSSIBLE if MMU
 

arch/sh/include/asm/atomic.h

@@ -13,7 +13,7 @@
 
 #define ATOMIC_INIT(i)	( (atomic_t) { (i) } )
 
-#define atomic_read(v)		((v)->counter)
+#define atomic_read(v)		(*(volatile int *)&(v)->counter)
 #define atomic_set(v,i)		((v)->counter = (i))
 
 #if defined(CONFIG_GUSA_RB)

arch/sh/include/asm/hw_breakpoint.h

@@ -46,10 +46,14 @@ struct pmu;
 /* Maximum number of UBC channels */
 #define HBP_NUM		2
 
+static inline int hw_breakpoint_slots(int type)
+{
+	return HBP_NUM;
+}
+
 /* arch/sh/kernel/hw_breakpoint.c */
-extern int arch_check_va_in_userspace(unsigned long va, u16 hbp_len);
-extern int arch_validate_hwbkpt_settings(struct perf_event *bp,
-					 struct task_struct *tsk);
+extern int arch_check_bp_in_kernelspace(struct perf_event *bp);
+extern int arch_validate_hwbkpt_settings(struct perf_event *bp);
 extern int hw_breakpoint_exceptions_notify(struct notifier_block *unused,
 					   unsigned long val, void *data);
 

arch/sh/kernel/hw_breakpoint.c

@@ -119,26 +119,17 @@ static int get_hbp_len(u16 hbp_len)
 	return len_in_bytes;
 }
 
-/*
- * Check for virtual address in user space.
- */
-int arch_check_va_in_userspace(unsigned long va, u16 hbp_len)
-{
-	unsigned int len;
-
-	len = get_hbp_len(hbp_len);
-
-	return (va <= TASK_SIZE - len);
-}
-
 /*
  * Check for virtual address in kernel space.
  */
-static int arch_check_va_in_kernelspace(unsigned long va, u8 hbp_len)
+int arch_check_bp_in_kernelspace(struct perf_event *bp)
 {
 	unsigned int len;
+	unsigned long va;
+	struct arch_hw_breakpoint *info = counter_arch_bp(bp);
 
-	len = get_hbp_len(hbp_len);
+	va = info->address;
+	len = get_hbp_len(info->len);
 
 	return (va >= TASK_SIZE) && ((va + len - 1) >= TASK_SIZE);
 }
@@ -226,8 +217,7 @@ static int arch_build_bp_info(struct perf_event *bp)
 /*
  * Validate the arch-specific HW Breakpoint register settings
  */
-int arch_validate_hwbkpt_settings(struct perf_event *bp,
-				  struct task_struct *tsk)
+int arch_validate_hwbkpt_settings(struct perf_event *bp)
 {
 	struct arch_hw_breakpoint *info = counter_arch_bp(bp);
 	unsigned int align;
@@ -270,15 +260,6 @@ int arch_validate_hwbkpt_settings(struct perf_event *bp,
 	if (info->address & align)
 		return -EINVAL;
 
-	/* Check that the virtual address is in the proper range */
-	if (tsk) {
-		if (!arch_check_va_in_userspace(info->address, info->len))
-			return -EFAULT;
-	} else {
-		if (!arch_check_va_in_kernelspace(info->address, info->len))
-			return -EFAULT;
-	}
-
 	return 0;
 }
 
@@ -363,8 +344,7 @@ static int __kprobes hw_breakpoint_handler(struct die_args *args)
 		perf_bp_event(bp, args->regs);
 
 		/* Deliver the signal to userspace */
-		if (arch_check_va_in_userspace(bp->attr.bp_addr,
-					       bp->attr.bp_len)) {
+		if (!arch_check_bp_in_kernelspace(bp)) {
 			siginfo_t info;
 
 			info.si_signo = args->signr;

arch/sh/kernel/ptrace_32.c

@@ -85,7 +85,7 @@ static int set_single_step(struct task_struct *tsk, unsigned long addr)
 
 	bp = thread->ptrace_bps[0];
 	if (!bp) {
-		hw_breakpoint_init(&attr);
+		ptrace_breakpoint_init(&attr);
 
 		attr.bp_addr = addr;
 		attr.bp_len = HW_BREAKPOINT_LEN_2;

arch/sparc/include/asm/atomic_32.h

@@ -25,7 +25,7 @@ extern int atomic_cmpxchg(atomic_t *, int, int);
 extern int atomic_add_unless(atomic_t *, int, int);
 extern void atomic_set(atomic_t *, int);
 
-#define atomic_read(v)          ((v)->counter)
+#define atomic_read(v)          (*(volatile int *)&(v)->counter)
 
 #define atomic_add(i, v)	((void)__atomic_add_return( (int)(i), (v)))
 #define atomic_sub(i, v)	((void)__atomic_add_return(-(int)(i), (v)))

arch/sparc/include/asm/atomic_64.h

@@ -13,8 +13,8 @@
 #define ATOMIC_INIT(i)		{ (i) }
 #define ATOMIC64_INIT(i)	{ (i) }
 
-#define atomic_read(v)		((v)->counter)
-#define atomic64_read(v)	((v)->counter)
+#define atomic_read(v)		(*(volatile int *)&(v)->counter)
+#define atomic64_read(v)	(*(volatile long *)&(v)->counter)
 
 #define atomic_set(v, i)	(((v)->counter) = i)
 #define atomic64_set(v, i)	(((v)->counter) = i)

arch/sparc/include/asm/bitops_64.h

@@ -44,7 +44,7 @@ extern void change_bit(unsigned long nr, volatile unsigned long *addr);
 
 #ifdef ULTRA_HAS_POPULATION_COUNT
 
-static inline unsigned int hweight64(unsigned long w)
+static inline unsigned int __arch_hweight64(unsigned long w)
 {
 	unsigned int res;
 
@@ -52,7 +52,7 @@ static inline unsigned int hweight64(unsigned long w)
 	return res;
 }
 
-static inline unsigned int hweight32(unsigned int w)
+static inline unsigned int __arch_hweight32(unsigned int w)
 {
 	unsigned int res;
 
@@ -60,7 +60,7 @@ static inline unsigned int hweight32(unsigned int w)
 	return res;
 }
 
-static inline unsigned int hweight16(unsigned int w)
+static inline unsigned int __arch_hweight16(unsigned int w)
 {
 	unsigned int res;
 
@@ -68,7 +68,7 @@ static inline unsigned int hweight16(unsigned int w)
 	return res;
 }
 
-static inline unsigned int hweight8(unsigned int w)
+static inline unsigned int __arch_hweight8(unsigned int w)
 {
 	unsigned int res;
 
@@ -78,9 +78,10 @@ static inline unsigned int hweight8(unsigned int w)
 
 #else
 
-#include <asm-generic/bitops/hweight.h>
+#include <asm-generic/bitops/arch_hweight.h>
 
 #endif
+#include <asm-generic/bitops/const_hweight.h>
 #include <asm-generic/bitops/lock.h>
 #endif /* __KERNEL__ */
 

arch/x86/Kconfig

@@ -53,11 +53,15 @@ config X86
 	select HAVE_KERNEL_LZMA
 	select HAVE_KERNEL_LZO
 	select HAVE_HW_BREAKPOINT
+	select HAVE_MIXED_BREAKPOINTS_REGS
 	select PERF_EVENTS
 	select ANON_INODES
 	select HAVE_ARCH_KMEMCHECK
 	select HAVE_USER_RETURN_NOTIFIER
 
+config INSTRUCTION_DECODER
+	def_bool (KPROBES || PERF_EVENTS)
+
 config OUTPUT_FORMAT
 	string
 	default "elf32-i386" if X86_32
@@ -197,20 +201,17 @@ config HAVE_INTEL_TXT
 
 # Use the generic interrupt handling code in kernel/irq/:
 config GENERIC_HARDIRQS
-	bool
-	default y
+	def_bool y
 
 config GENERIC_HARDIRQS_NO__DO_IRQ
        def_bool y
 
 config GENERIC_IRQ_PROBE
-	bool
-	default y
+	def_bool y
 
 config GENERIC_PENDING_IRQ
-	bool
+	def_bool y
 	depends on GENERIC_HARDIRQS && SMP
-	default y
 
 config USE_GENERIC_SMP_HELPERS
 	def_bool y
@@ -225,19 +226,22 @@ config X86_64_SMP
 	depends on X86_64 && SMP
 
 config X86_HT
-	bool
+	def_bool y
 	depends on SMP
-	default y
 
 config X86_TRAMPOLINE
-	bool
+	def_bool y
 	depends on SMP || (64BIT && ACPI_SLEEP)
-	default y
 
 config X86_32_LAZY_GS
 	def_bool y
 	depends on X86_32 && !CC_STACKPROTECTOR
 
+config ARCH_HWEIGHT_CFLAGS
+	string
+	default "-fcall-saved-ecx -fcall-saved-edx" if X86_32
+	default "-fcall-saved-rdi -fcall-saved-rsi -fcall-saved-rdx -fcall-saved-rcx -fcall-saved-r8 -fcall-saved-r9 -fcall-saved-r10 -fcall-saved-r11" if X86_64
+
 config KTIME_SCALAR
 	def_bool X86_32
 source "init/Kconfig"
@@ -447,7 +451,7 @@ config X86_NUMAQ
 	  firmware with - send email to <Martin.Bligh@us.ibm.com>.
 
 config X86_SUPPORTS_MEMORY_FAILURE
-	bool
+	def_bool y
 	# MCE code calls memory_failure():
 	depends on X86_MCE
 	# On 32-bit this adds too big of NODES_SHIFT and we run out of page flags:
@@ -455,7 +459,6 @@ config X86_SUPPORTS_MEMORY_FAILURE
 	# On 32-bit SPARSEMEM adds too big of SECTIONS_WIDTH:
 	depends on X86_64 || !SPARSEMEM
 	select ARCH_SUPPORTS_MEMORY_FAILURE
-	default y
 
 config X86_VISWS
 	bool "SGI 320/540 (Visual Workstation)"
@@ -570,7 +573,6 @@ config PARAVIRT_SPINLOCKS
 
 config PARAVIRT_CLOCK
 	bool
-	default n
 
 endif
 
@@ -749,7 +751,6 @@ config MAXSMP
 	bool "Configure Maximum number of SMP Processors and NUMA Nodes"
 	depends on X86_64 && SMP && DEBUG_KERNEL && EXPERIMENTAL
 	select CPUMASK_OFFSTACK
-	default n
 	---help---
 	  Configure maximum number of CPUS and NUMA Nodes for this architecture.
 	  If unsure, say N.
@@ -829,7 +830,6 @@ config X86_VISWS_APIC
 
 config X86_REROUTE_FOR_BROKEN_BOOT_IRQS
 	bool "Reroute for broken boot IRQs"
-	default n
 	depends on X86_IO_APIC
 	---help---
 	  This option enables a workaround that fixes a source of
@@ -876,9 +876,8 @@ config X86_MCE_AMD
 	   the DRAM Error Threshold.
 
 config X86_ANCIENT_MCE
-	def_bool n
+	bool "Support for old Pentium 5 / WinChip machine checks"
 	depends on X86_32 && X86_MCE
-	prompt "Support for old Pentium 5 / WinChip machine checks"
 	---help---
 	  Include support for machine check handling on old Pentium 5 or WinChip
 	  systems. These typically need to be enabled explicitely on the command
@@ -886,8 +885,7 @@ config X86_ANCIENT_MCE
 
 config X86_MCE_THRESHOLD
 	depends on X86_MCE_AMD || X86_MCE_INTEL
-	bool
-	default y
+	def_bool y
 
 config X86_MCE_INJECT
 	depends on X86_MCE
@@ -1026,8 +1024,8 @@ config X86_CPUID
 
 choice
 	prompt "High Memory Support"
-	default HIGHMEM4G if !X86_NUMAQ
 	default HIGHMEM64G if X86_NUMAQ
+	default HIGHMEM4G
 	depends on X86_32
 
 config NOHIGHMEM
@@ -1285,7 +1283,7 @@ source "mm/Kconfig"
 
 config HIGHPTE
 	bool "Allocate 3rd-level pagetables from highmem"
-	depends on X86_32 && (HIGHMEM4G || HIGHMEM64G)
+	depends on HIGHMEM
 	---help---
 	  The VM uses one page table entry for each page of physical memory.
 	  For systems with a lot of RAM, this can be wasteful of precious
@@ -1369,8 +1367,7 @@ config MATH_EMULATION
 	  kernel, it won't hurt.
 
 config MTRR
-	bool
-	default y
+	def_bool y
 	prompt "MTRR (Memory Type Range Register) support" if EMBEDDED
 	---help---
 	  On Intel P6 family processors (Pentium Pro, Pentium II and later)
@@ -1436,8 +1433,7 @@ config MTRR_SANITIZER_SPARE_REG_NR_DEFAULT
 	  mtrr_spare_reg_nr=N on the kernel command line.
 
 config X86_PAT
-	bool
-	default y
+	def_bool y
 	prompt "x86 PAT support" if EMBEDDED
 	depends on MTRR
 	---help---
@@ -1605,8 +1601,7 @@ config X86_NEED_RELOCS
 	depends on X86_32 && RELOCATABLE
 
 config PHYSICAL_ALIGN
-	hex
-	prompt "Alignment value to which kernel should be aligned" if X86_32
+	hex "Alignment value to which kernel should be aligned" if X86_32
 	default "0x1000000"
 	range 0x2000 0x1000000
 	---help---
@@ -1653,7 +1648,6 @@ config COMPAT_VDSO
 
 config CMDLINE_BOOL
 	bool "Built-in kernel command line"
-	default n
 	---help---
 	  Allow for specifying boot arguments to the kernel at
 	  build time.  On some systems (e.g. embedded ones), it is
@@ -1687,7 +1681,6 @@ config CMDLINE
 
 config CMDLINE_OVERRIDE
 	bool "Built-in command line overrides boot loader arguments"
-	default n
 	depends on CMDLINE_BOOL
 	---help---
 	  Set this option to 'Y' to have the kernel ignore the boot loader
@@ -1723,8 +1716,7 @@ source "drivers/acpi/Kconfig"
 source "drivers/sfi/Kconfig"
 
 config X86_APM_BOOT
-	bool
-	default y
+	def_bool y
 	depends on APM || APM_MODULE
 
 menuconfig APM
@@ -1953,8 +1945,7 @@ config DMAR_DEFAULT_ON
 	  experimental.
 
 config DMAR_BROKEN_GFX_WA
-	def_bool n
-	prompt "Workaround broken graphics drivers (going away soon)"
+	bool "Workaround broken graphics drivers (going away soon)"
 	depends on DMAR && BROKEN
 	---help---
 	  Current Graphics drivers tend to use physical address
@@ -2052,7 +2043,6 @@ config SCx200HR_TIMER
 config OLPC
 	bool "One Laptop Per Child support"
 	select GPIOLIB
-	default n
 	---help---
 	  Add support for detecting the unique features of the OLPC
 	  XO hardware.

arch/x86/Kconfig.cpu

@@ -338,6 +338,10 @@ config X86_F00F_BUG
 	def_bool y
 	depends on M586MMX || M586TSC || M586 || M486 || M386
 
+config X86_INVD_BUG
+	def_bool y
+	depends on M486 || M386
+
 config X86_WP_WORKS_OK
 	def_bool y
 	depends on !M386
@@ -502,23 +506,3 @@ config CPU_SUP_UMC_32
 	  CPU might render the kernel unbootable.
 
 	  If unsure, say N.
-
-config X86_DS
-	def_bool X86_PTRACE_BTS
-	depends on X86_DEBUGCTLMSR
-	select HAVE_HW_BRANCH_TRACER
-
-config X86_PTRACE_BTS
-	bool "Branch Trace Store"
-	default y
-	depends on X86_DEBUGCTLMSR
-	depends on BROKEN
-	---help---
-	  This adds a ptrace interface to the hardware's branch trace store.
-
-	  Debuggers may use it to collect an execution trace of the debugged
-	  application in order to answer the question 'how did I get here?'.
-	  Debuggers may trace user mode as well as kernel mode.
-
-	  Say Y unless there is no application development on this machine
-	  and you want to save a small amount of code size.

arch/x86/Kconfig.debug

@@ -45,7 +45,6 @@ config EARLY_PRINTK
 
 config EARLY_PRINTK_DBGP
 	bool "Early printk via EHCI debug port"
-	default n
 	depends on EARLY_PRINTK && PCI
 	---help---
 	  Write kernel log output directly into the EHCI debug port.
@@ -76,7 +75,6 @@ config DEBUG_PER_CPU_MAPS
 	bool "Debug access to per_cpu maps"
 	depends on DEBUG_KERNEL
 	depends on SMP
-	default n
 	---help---
 	  Say Y to verify that the per_cpu map being accessed has
 	  been setup.  Adds a fair amount of code to kernel memory
@@ -174,15 +172,6 @@ config IOMMU_LEAK
 	  Add a simple leak tracer to the IOMMU code. This is useful when you
 	  are debugging a buggy device driver that leaks IOMMU mappings.
 
-config X86_DS_SELFTEST
-    bool "DS selftest"
-    default y
-    depends on DEBUG_KERNEL
-    depends on X86_DS
-	---help---
-	  Perform Debug Store selftests at boot time.
-	  If in doubt, say "N".
-
 config HAVE_MMIOTRACE_SUPPORT
 	def_bool y
 

arch/x86/Makefile

@@ -95,8 +95,9 @@ sp-$(CONFIG_X86_64) := rsp
 cfi := $(call as-instr,.cfi_startproc\n.cfi_rel_offset $(sp-y)$(comma)0\n.cfi_endproc,-DCONFIG_AS_CFI=1)
 # is .cfi_signal_frame supported too?
 cfi-sigframe := $(call as-instr,.cfi_startproc\n.cfi_signal_frame\n.cfi_endproc,-DCONFIG_AS_CFI_SIGNAL_FRAME=1)
-KBUILD_AFLAGS += $(cfi) $(cfi-sigframe)
-KBUILD_CFLAGS += $(cfi) $(cfi-sigframe)
+cfi-sections := $(call as-instr,.cfi_sections .debug_frame,-DCONFIG_AS_CFI_SECTIONS=1)
+KBUILD_AFLAGS += $(cfi) $(cfi-sigframe) $(cfi-sections)
+KBUILD_CFLAGS += $(cfi) $(cfi-sigframe) $(cfi-sections)
 
 LDFLAGS := -m elf_$(UTS_MACHINE)
 

arch/x86/include/asm/alternative-asm.h

@@ -6,8 +6,8 @@
 	.macro LOCK_PREFIX
 1:	lock
 	.section .smp_locks,"a"
-	_ASM_ALIGN
-	_ASM_PTR 1b
+	.balign 4
+	.long 1b - .
 	.previous
 	.endm
 #else

arch/x86/include/asm/alternative.h

@@ -28,20 +28,20 @@
  */
 
 #ifdef CONFIG_SMP
-#define LOCK_PREFIX \
+#define LOCK_PREFIX_HERE \
 		".section .smp_locks,\"a\"\n"	\
-		_ASM_ALIGN "\n"			\
-		_ASM_PTR "661f\n" /* address */	\
+		".balign 4\n"			\
+		".long 671f - .\n" /* offset */	\
 		".previous\n"			\
-		"661:\n\tlock; "
+		"671:"
+
+#define LOCK_PREFIX LOCK_PREFIX_HERE "\n\tlock; "
 
 #else /* ! CONFIG_SMP */
+#define LOCK_PREFIX_HERE ""
 #define LOCK_PREFIX ""
 #endif
 
-/* This must be included *after* the definition of LOCK_PREFIX */
-#include <asm/cpufeature.h>
-
 struct alt_instr {
 	u8 *instr;		/* original instruction */
 	u8 *replacement;
@@ -95,6 +95,12 @@ static inline int alternatives_text_reserved(void *start, void *end)
       "663:\n\t" newinstr "\n664:\n"		/* replacement     */	\
       ".previous"
 
+/*
+ * This must be included *after* the definition of ALTERNATIVE due to
+ * <asm/arch_hweight.h>
+ */
+#include <asm/cpufeature.h>
+
 /*
  * Alternative instructions for different CPU types or capabilities.
  *

arch/x86/include/asm/amd_iommu_types.h

@@ -174,6 +174,40 @@
 				(~((1ULL << (12 + ((lvl) * 9))) - 1)))
 #define PM_ALIGNED(lvl, addr)	((PM_MAP_MASK(lvl) & (addr)) == (addr))
 
+/*
+ * Returns the page table level to use for a given page size
+ * Pagesize is expected to be a power-of-two
+ */
+#define PAGE_SIZE_LEVEL(pagesize) \
+		((__ffs(pagesize) - 12) / 9)
+/*
+ * Returns the number of ptes to use for a given page size
+ * Pagesize is expected to be a power-of-two
+ */
+#define PAGE_SIZE_PTE_COUNT(pagesize) \
+		(1ULL << ((__ffs(pagesize) - 12) % 9))
+
+/*
+ * Aligns a given io-virtual address to a given page size
+ * Pagesize is expected to be a power-of-two
+ */
+#define PAGE_SIZE_ALIGN(address, pagesize) \
+		((address) & ~((pagesize) - 1))
+/*
+ * Creates an IOMMU PTE for an address an a given pagesize
+ * The PTE has no permission bits set
+ * Pagesize is expected to be a power-of-two larger than 4096
+ */
+#define PAGE_SIZE_PTE(address, pagesize)		\
+		(((address) | ((pagesize) - 1)) &	\
+		 (~(pagesize >> 1)) & PM_ADDR_MASK)
+
+/*
+ * Takes a PTE value with mode=0x07 and returns the page size it maps
+ */
+#define PTE_PAGE_SIZE(pte) \
+	(1ULL << (1 + ffz(((pte) | 0xfffULL))))
+
 #define IOMMU_PTE_P  (1ULL << 0)
 #define IOMMU_PTE_TV (1ULL << 1)
 #define IOMMU_PTE_U  (1ULL << 59)

arch/x86/include/asm/apic.h

@@ -373,6 +373,7 @@ extern atomic_t init_deasserted;
 extern int wakeup_secondary_cpu_via_nmi(int apicid, unsigned long start_eip);
 #endif
 
+#ifdef CONFIG_X86_LOCAL_APIC
 static inline u32 apic_read(u32 reg)
 {
 	return apic->read(reg);
@@ -403,10 +404,19 @@ static inline u32 safe_apic_wait_icr_idle(void)
 	return apic->safe_wait_icr_idle();
 }
 
+#else /* CONFIG_X86_LOCAL_APIC */
+
+static inline u32 apic_read(u32 reg) { return 0; }
+static inline void apic_write(u32 reg, u32 val) { }
+static inline u64 apic_icr_read(void) { return 0; }
+static inline void apic_icr_write(u32 low, u32 high) { }
+static inline void apic_wait_icr_idle(void) { }
+static inline u32 safe_apic_wait_icr_idle(void) { return 0; }
+
+#endif /* CONFIG_X86_LOCAL_APIC */
 
 static inline void ack_APIC_irq(void)
 {
-#ifdef CONFIG_X86_LOCAL_APIC
 	/*
 	 * ack_APIC_irq() actually gets compiled as a single instruction
 	 * ... yummie.
@@ -414,7 +424,6 @@ static inline void ack_APIC_irq(void)
 
 	/* Docs say use 0 for future compatibility */
 	apic_write(APIC_EOI, 0);
-#endif
 }
 
 static inline unsigned default_get_apic_id(unsigned long x)

arch/x86/include/asm/arch_hweight.h

@@ -0,0 +1,61 @@
+#ifndef _ASM_X86_HWEIGHT_H
+#define _ASM_X86_HWEIGHT_H
+
+#ifdef CONFIG_64BIT
+/* popcnt %edi, %eax -- redundant REX prefix for alignment */
+#define POPCNT32 ".byte 0xf3,0x40,0x0f,0xb8,0xc7"
+/* popcnt %rdi, %rax */
+#define POPCNT64 ".byte 0xf3,0x48,0x0f,0xb8,0xc7"
+#define REG_IN "D"
+#define REG_OUT "a"
+#else
+/* popcnt %eax, %eax */
+#define POPCNT32 ".byte 0xf3,0x0f,0xb8,0xc0"
+#define REG_IN "a"
+#define REG_OUT "a"
+#endif
+
+/*
+ * __sw_hweightXX are called from within the alternatives below
+ * and callee-clobbered registers need to be taken care of. See
+ * ARCH_HWEIGHT_CFLAGS in <arch/x86/Kconfig> for the respective
+ * compiler switches.
+ */
+static inline unsigned int __arch_hweight32(unsigned int w)
+{
+	unsigned int res = 0;
+
+	asm (ALTERNATIVE("call __sw_hweight32", POPCNT32, X86_FEATURE_POPCNT)
+		     : "="REG_OUT (res)
+		     : REG_IN (w));
+
+	return res;
+}
+
+static inline unsigned int __arch_hweight16(unsigned int w)
+{
+	return __arch_hweight32(w & 0xffff);
+}
+
+static inline unsigned int __arch_hweight8(unsigned int w)
+{
+	return __arch_hweight32(w & 0xff);
+}
+
+static inline unsigned long __arch_hweight64(__u64 w)
+{
+	unsigned long res = 0;
+
+#ifdef CONFIG_X86_32
+	return  __arch_hweight32((u32)w) +
+		__arch_hweight32((u32)(w >> 32));
+#else
+	asm (ALTERNATIVE("call __sw_hweight64", POPCNT64, X86_FEATURE_POPCNT)
+		     : "="REG_OUT (res)
+		     : REG_IN (w));
+#endif /* CONFIG_X86_32 */
+
+	return res;
+}
+
+#endif

arch/x86/include/asm/atomic.h

@@ -22,7 +22,7 @@
  */
 static inline int atomic_read(const atomic_t *v)
 {
-	return v->counter;
+	return (*(volatile int *)&(v)->counter);
 }
 
 /**
@@ -246,6 +246,29 @@ static inline int atomic_add_unless(atomic_t *v, int a, int u)
 
 #define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0)
 
+/*
+ * atomic_dec_if_positive - decrement by 1 if old value positive
+ * @v: pointer of type atomic_t
+ *
+ * The function returns the old value of *v minus 1, even if
+ * the atomic variable, v, was not decremented.
+ */
+static inline int atomic_dec_if_positive(atomic_t *v)
+{
+	int c, old, dec;
+	c = atomic_read(v);
+	for (;;) {
+		dec = c - 1;
+		if (unlikely(dec < 0))
+			break;
+		old = atomic_cmpxchg((v), c, dec);
+		if (likely(old == c))
+			break;
+		c = old;
+	}
+	return dec;
+}
+
 /**
  * atomic_inc_short - increment of a short integer
  * @v: pointer to type int

arch/x86/include/asm/atomic64_32.h

@@ -14,109 +14,193 @@ typedef struct {
 
 #define ATOMIC64_INIT(val)	{ (val) }
 
-extern u64 atomic64_cmpxchg(atomic64_t *ptr, u64 old_val, u64 new_val);
+#ifdef CONFIG_X86_CMPXCHG64
+#define ATOMIC64_ALTERNATIVE_(f, g) "call atomic64_" #g "_cx8"
+#else
+#define ATOMIC64_ALTERNATIVE_(f, g) ALTERNATIVE("call atomic64_" #f "_386", "call atomic64_" #g "_cx8", X86_FEATURE_CX8)
+#endif
+
+#define ATOMIC64_ALTERNATIVE(f) ATOMIC64_ALTERNATIVE_(f, f)
+
+/**
+ * atomic64_cmpxchg - cmpxchg atomic64 variable
+ * @p: pointer to type atomic64_t
+ * @o: expected value
+ * @n: new value
+ *
+ * Atomically sets @v to @n if it was equal to @o and returns
+ * the old value.
+ */
+
+static inline long long atomic64_cmpxchg(atomic64_t *v, long long o, long long n)
+{
+	return cmpxchg64(&v->counter, o, n);
+}
 
 /**
  * atomic64_xchg - xchg atomic64 variable
- * @ptr:      pointer to type atomic64_t
- * @new_val:  value to assign
+ * @v: pointer to type atomic64_t
+ * @n: value to assign
  *
- * Atomically xchgs the value of @ptr to @new_val and returns
+ * Atomically xchgs the value of @v to @n and returns
  * the old value.
  */
-extern u64 atomic64_xchg(atomic64_t *ptr, u64 new_val);
+static inline long long atomic64_xchg(atomic64_t *v, long long n)
+{
+	long long o;
+	unsigned high = (unsigned)(n >> 32);
+	unsigned low = (unsigned)n;
+	asm volatile(ATOMIC64_ALTERNATIVE(xchg)
+		     : "=A" (o), "+b" (low), "+c" (high)
+		     : "S" (v)
+		     : "memory"
+		     );
+	return o;
+}
 
 /**
  * atomic64_set - set atomic64 variable
- * @ptr:      pointer to type atomic64_t
- * @new_val:  value to assign
+ * @v: pointer to type atomic64_t
+ * @n: value to assign
  *
- * Atomically sets the value of @ptr to @new_val.
+ * Atomically sets the value of @v to @n.
  */
-extern void atomic64_set(atomic64_t *ptr, u64 new_val);
+static inline void atomic64_set(atomic64_t *v, long long i)
+{
+	unsigned high = (unsigned)(i >> 32);
+	unsigned low = (unsigned)i;
+	asm volatile(ATOMIC64_ALTERNATIVE(set)
+		     : "+b" (low), "+c" (high)
+		     : "S" (v)
+		     : "eax", "edx", "memory"
+		     );
+}
 
 /**
  * atomic64_read - read atomic64 variable
- * @ptr:      pointer to type atomic64_t
+ * @v: pointer to type atomic64_t
  *
- * Atomically reads the value of @ptr and returns it.
+ * Atomically reads the value of @v and returns it.
  */
-static inline u64 atomic64_read(atomic64_t *ptr)
+static inline long long atomic64_read(atomic64_t *v)
 {
-	u64 res;
-
-	/*
-	 * Note, we inline this atomic64_t primitive because
-	 * it only clobbers EAX/EDX and leaves the others
-	 * untouched. We also (somewhat subtly) rely on the
-	 * fact that cmpxchg8b returns the current 64-bit value
-	 * of the memory location we are touching:
-	 */
-	asm volatile(
-		"mov %%ebx, %%eax\n\t"
-		"mov %%ecx, %%edx\n\t"
-		LOCK_PREFIX "cmpxchg8b %1\n"
-			: "=&A" (res)
-			: "m" (*ptr)
-		);
-
-	return res;
-}
-
-extern u64 atomic64_read(atomic64_t *ptr);
+	long long r;
+	asm volatile(ATOMIC64_ALTERNATIVE(read)
+		     : "=A" (r), "+c" (v)
+		     : : "memory"
+		     );
+	return r;
+ }
 
 /**
  * atomic64_add_return - add and return
- * @delta: integer value to add
- * @ptr:   pointer to type atomic64_t
+ * @i: integer value to add
+ * @v: pointer to type atomic64_t
  *
- * Atomically adds @delta to @ptr and returns @delta + *@ptr
+ * Atomically adds @i to @v and returns @i + *@v
  */
-extern u64 atomic64_add_return(u64 delta, atomic64_t *ptr);
+static inline long long atomic64_add_return(long long i, atomic64_t *v)
+{
+	asm volatile(ATOMIC64_ALTERNATIVE(add_return)
+		     : "+A" (i), "+c" (v)
+		     : : "memory"
+		     );
+	return i;
+}
 
 /*
  * Other variants with different arithmetic operators:
  */
-extern u64 atomic64_sub_return(u64 delta, atomic64_t *ptr);
-extern u64 atomic64_inc_return(atomic64_t *ptr);
-extern u64 atomic64_dec_return(atomic64_t *ptr);
+static inline long long atomic64_sub_return(long long i, atomic64_t *v)
+{
+	asm volatile(ATOMIC64_ALTERNATIVE(sub_return)
+		     : "+A" (i), "+c" (v)
+		     : : "memory"
+		     );
+	return i;
+}
+
+static inline long long atomic64_inc_return(atomic64_t *v)
+{
+	long long a;
+	asm volatile(ATOMIC64_ALTERNATIVE(inc_return)
+		     : "=A" (a)
+		     : "S" (v)
+		     : "memory", "ecx"
+		     );
+	return a;
+}
+
+static inline long long atomic64_dec_return(atomic64_t *v)
+{
+	long long a;
+	asm volatile(ATOMIC64_ALTERNATIVE(dec_return)
+		     : "=A" (a)
+		     : "S" (v)
+		     : "memory", "ecx"
+		     );
+	return a;
+}
 
 /**
  * atomic64_add - add integer to atomic64 variable
- * @delta: integer value to add
- * @ptr:   pointer to type atomic64_t
+ * @i: integer value to add
+ * @v: pointer to type atomic64_t
  *
- * Atomically adds @delta to @ptr.
+ * Atomically adds @i to @v.
  */
-extern void atomic64_add(u64 delta, atomic64_t *ptr);
+static inline long long atomic64_add(long long i, atomic64_t *v)
+{
+	asm volatile(ATOMIC64_ALTERNATIVE_(add, add_return)
+		     : "+A" (i), "+c" (v)
+		     : : "memory"
+		     );
+	return i;
+}
 
 /**
  * atomic64_sub - subtract the atomic64 variable
- * @delta: integer value to subtract
- * @ptr:   pointer to type atomic64_t
+ * @i: integer value to subtract
+ * @v: pointer to type atomic64_t
  *
- * Atomically subtracts @delta from @ptr.
+ * Atomically subtracts @i from @v.
  */
-extern void atomic64_sub(u64 delta, atomic64_t *ptr);
+static inline long long atomic64_sub(long long i, atomic64_t *v)
+{
+	asm volatile(ATOMIC64_ALTERNATIVE_(sub, sub_return)
+		     : "+A" (i), "+c" (v)
+		     : : "memory"
+		     );
+	return i;
+}
 
 /**
  * atomic64_sub_and_test - subtract value from variable and test result
- * @delta: integer value to subtract
- * @ptr:   pointer to type atomic64_t
- *
- * Atomically subtracts @delta from @ptr and returns
+ * @i: integer value to subtract
+ * @v: pointer to type atomic64_t
+  *
+ * Atomically subtracts @i from @v and returns
  * true if the result is zero, or false for all
  * other cases.
  */
-extern int atomic64_sub_and_test(u64 delta, atomic64_t *ptr);
+static inline int atomic64_sub_and_test(long long i, atomic64_t *v)
+{
+	return atomic64_sub_return(i, v) == 0;
+}
 
 /**
  * atomic64_inc - increment atomic64 variable
- * @ptr: pointer to type atomic64_t
+ * @v: pointer to type atomic64_t
  *
- * Atomically increments @ptr by 1.
+ * Atomically increments @v by 1.
  */
-extern void atomic64_inc(atomic64_t *ptr);
+static inline void atomic64_inc(atomic64_t *v)
+{
+	asm volatile(ATOMIC64_ALTERNATIVE_(inc, inc_return)
+		     : : "S" (v)
+		     : "memory", "eax", "ecx", "edx"
+		     );
+}
 
 /**
  * atomic64_dec - decrement atomic64 variable
@@ -124,37 +208,97 @@ extern void atomic64_inc(atomic64_t *ptr);
  *
  * Atomically decrements @ptr by 1.
  */
-extern void atomic64_dec(atomic64_t *ptr);
+static inline void atomic64_dec(atomic64_t *v)
+{
+	asm volatile(ATOMIC64_ALTERNATIVE_(dec, dec_return)
+		     : : "S" (v)
+		     : "memory", "eax", "ecx", "edx"
+		     );
+}
 
 /**
  * atomic64_dec_and_test - decrement and test
- * @ptr: pointer to type atomic64_t
+ * @v: pointer to type atomic64_t
  *
- * Atomically decrements @ptr by 1 and
+ * Atomically decrements @v by 1 and
  * returns true if the result is 0, or false for all other
  * cases.
  */
-extern int atomic64_dec_and_test(atomic64_t *ptr);
+static inline int atomic64_dec_and_test(atomic64_t *v)
+{
+	return atomic64_dec_return(v) == 0;
+}
 
 /**
  * atomic64_inc_and_test - increment and test
- * @ptr: pointer to type atomic64_t
+ * @v: pointer to type atomic64_t
  *
- * Atomically increments @ptr by 1
+ * Atomically increments @v by 1
  * and returns true if the result is zero, or false for all
  * other cases.
  */
-extern int atomic64_inc_and_test(atomic64_t *ptr);
+static inline int atomic64_inc_and_test(atomic64_t *v)
+{
+	return atomic64_inc_return(v) == 0;
+}
 
 /**
  * atomic64_add_negative - add and test if negative
- * @delta: integer value to add
- * @ptr:   pointer to type atomic64_t
+ * @i: integer value to add
+ * @v: pointer to type atomic64_t
  *
- * Atomically adds @delta to @ptr and returns true
+ * Atomically adds @i to @v and returns true
  * if the result is negative, or false when
  * result is greater than or equal to zero.
  */
-extern int atomic64_add_negative(u64 delta, atomic64_t *ptr);
+static inline int atomic64_add_negative(long long i, atomic64_t *v)
+{
+	return atomic64_add_return(i, v) < 0;
+}
+
+/**
+ * atomic64_add_unless - add unless the number is a given value
+ * @v: pointer of type atomic64_t
+ * @a: the amount to add to v...
+ * @u: ...unless v is equal to u.
+ *
+ * Atomically adds @a to @v, so long as it was not @u.
+ * Returns non-zero if @v was not @u, and zero otherwise.
+ */
+static inline int atomic64_add_unless(atomic64_t *v, long long a, long long u)
+{
+	unsigned low = (unsigned)u;
+	unsigned high = (unsigned)(u >> 32);
+	asm volatile(ATOMIC64_ALTERNATIVE(add_unless) "\n\t"
+		     : "+A" (a), "+c" (v), "+S" (low), "+D" (high)
+		     : : "memory");
+	return (int)a;
+}
+
+
+static inline int atomic64_inc_not_zero(atomic64_t *v)
+{
+	int r;
+	asm volatile(ATOMIC64_ALTERNATIVE(inc_not_zero)
+		     : "=a" (r)
+		     : "S" (v)
+		     : "ecx", "edx", "memory"
+		     );
+	return r;
+}
+
+static inline long long atomic64_dec_if_positive(atomic64_t *v)
+{
+	long long r;
+	asm volatile(ATOMIC64_ALTERNATIVE(dec_if_positive)
+		     : "=A" (r)
+		     : "S" (v)
+		     : "ecx", "memory"
+		     );
+	return r;
+}
+
+#undef ATOMIC64_ALTERNATIVE
+#undef ATOMIC64_ALTERNATIVE_
 
 #endif /* _ASM_X86_ATOMIC64_32_H */

arch/x86/include/asm/atomic64_64.h

@@ -18,7 +18,7 @@
  */
 static inline long atomic64_read(const atomic64_t *v)
 {
-	return v->counter;
+	return (*(volatile long *)&(v)->counter);
 }
 
 /**
@@ -221,4 +221,27 @@ static inline int atomic64_add_unless(atomic64_t *v, long a, long u)
 
 #define atomic64_inc_not_zero(v) atomic64_add_unless((v), 1, 0)
 
+/*
+ * atomic64_dec_if_positive - decrement by 1 if old value positive
+ * @v: pointer of type atomic_t
+ *
+ * The function returns the old value of *v minus 1, even if
+ * the atomic variable, v, was not decremented.
+ */
+static inline long atomic64_dec_if_positive(atomic64_t *v)
+{
+	long c, old, dec;
+	c = atomic64_read(v);
+	for (;;) {
+		dec = c - 1;
+		if (unlikely(dec < 0))
+			break;
+		old = atomic64_cmpxchg((v), c, dec);
+		if (likely(old == c))
+			break;
+		c = old;
+	}
+	return dec;
+}
+
 #endif /* _ASM_X86_ATOMIC64_64_H */

arch/x86/include/asm/bitops.h

@@ -444,7 +444,9 @@ static inline int fls(int x)
 
 #define ARCH_HAS_FAST_MULTIPLIER 1
 
-#include <asm-generic/bitops/hweight.h>
+#include <asm/arch_hweight.h>
+
+#include <asm-generic/bitops/const_hweight.h>
 
 #endif /* __KERNEL__ */