USB: re-enable interface after driver unbinds

This patch (as1197) fixes an error introduced recently.  Since a
significant number of devices can't handle Set-Interface requests, we
no longer call usb_set_interface() when a driver unbinds from an
interface, provided the interface is already in altsetting 0.  However
the interface still does get disabled, and the call to
usb_set_interface() was the only thing re-enabling it.  Since the
interface doesn't get re-enabled, further attempts to use it fail.

So the patch adds a call to usb_enable_interface() when a driver
unbinds and the interface is in altsetting 0.  For this to work
right, the interface's endpoints have to be re-enabled but their
toggles have to be left alone.  Therefore an additional argument is
added to usb_enable_endpoint() and usb_enable_interface(), a flag
indicating whether or not the endpoint toggles should be reset.

This is a forward-ported version of a patch which fixes Bugzilla
#12301.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-by: David Roka <roka@dawid.hu>
Reported-by: Erik Ekman <erik@kryo.se>
Tested-by: Erik Ekman <erik@kryo.se>
Tested-by: Alon Bar-Lev <alon.barlev@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

drivers/usb/core/driver.c

@@ -295,9 +295,12 @@ static int usb_unbind_interface(struct device *dev)
 	 * altsetting means creating new endpoint device entries).
 	 * When either of these happens, defer the Set-Interface.
 	 */
-	if (intf->cur_altsetting->desc.bAlternateSetting == 0)
-		;	/* Already in altsetting 0 so skip Set-Interface */
-	else if (!error && intf->dev.power.status == DPM_ON)
+	if (intf->cur_altsetting->desc.bAlternateSetting == 0) {
+		/* Already in altsetting 0 so skip Set-Interface.
+		 * Just re-enable it without affecting the endpoint toggles.
+		 */
+		usb_enable_interface(udev, intf, false);
+	} else if (!error && intf->dev.power.status == DPM_ON)
 		usb_set_interface(udev, intf->altsetting[0].
 				desc.bInterfaceNumber, 0);
 	else

drivers/usb/core/hub.c

@@ -2384,7 +2384,7 @@ void usb_ep0_reinit(struct usb_device *udev)
 {
 	usb_disable_endpoint(udev, 0 + USB_DIR_IN);
 	usb_disable_endpoint(udev, 0 + USB_DIR_OUT);
-	usb_enable_endpoint(udev, &udev->ep0);
+	usb_enable_endpoint(udev, &udev->ep0, true);
 }
 EXPORT_SYMBOL_GPL(usb_ep0_reinit);
 

drivers/usb/core/message.c

@@ -1143,22 +1143,26 @@ void usb_disable_device(struct usb_device *dev, int skip_ep0)
  * usb_enable_endpoint - Enable an endpoint for USB communications
  * @dev: the device whose interface is being enabled
  * @ep: the endpoint
+ * @reset_toggle: flag to set the endpoint's toggle back to 0
  *
- * Resets the endpoint toggle, and sets dev->ep_{in,out} pointers.
+ * Resets the endpoint toggle if asked, and sets dev->ep_{in,out} pointers.
  * For control endpoints, both the input and output sides are handled.
  */
-void usb_enable_endpoint(struct usb_device *dev, struct usb_host_endpoint *ep)
+void usb_enable_endpoint(struct usb_device *dev, struct usb_host_endpoint *ep,
+		bool reset_toggle)
 {
 	int epnum = usb_endpoint_num(&ep->desc);
 	int is_out = usb_endpoint_dir_out(&ep->desc);
 	int is_control = usb_endpoint_xfer_control(&ep->desc);
 
 	if (is_out || is_control) {
-		usb_settoggle(dev, epnum, 1, 0);
+		if (reset_toggle)
+			usb_settoggle(dev, epnum, 1, 0);
 		dev->ep_out[epnum] = ep;
 	}
 	if (!is_out || is_control) {
-		usb_settoggle(dev, epnum, 0, 0);
+		if (reset_toggle)
+			usb_settoggle(dev, epnum, 0, 0);
 		dev->ep_in[epnum] = ep;
 	}
 	ep->enabled = 1;
@@ -1168,17 +1172,18 @@ void usb_enable_endpoint(struct usb_device *dev, struct usb_host_endpoint *ep)
  * usb_enable_interface - Enable all the endpoints for an interface
  * @dev: the device whose interface is being enabled
  * @intf: pointer to the interface descriptor
+ * @reset_toggles: flag to set the endpoints' toggles back to 0
  *
  * Enables all the endpoints for the interface's current altsetting.
  */
-static void usb_enable_interface(struct usb_device *dev,
-				 struct usb_interface *intf)
+void usb_enable_interface(struct usb_device *dev,
+		struct usb_interface *intf, bool reset_toggles)
 {
 	struct usb_host_interface *alt = intf->cur_altsetting;
 	int i;
 
 	for (i = 0; i < alt->desc.bNumEndpoints; ++i)
-		usb_enable_endpoint(dev, &alt->endpoint[i]);
+		usb_enable_endpoint(dev, &alt->endpoint[i], reset_toggles);
 }
 
 /**
@@ -1303,7 +1308,7 @@ int usb_set_interface(struct usb_device *dev, int interface, int alternate)
 	 * during the SETUP stage - hence EP0 toggles are "don't care" here.
 	 * (Likewise, EP0 never "halts" on well designed devices.)
 	 */
-	usb_enable_interface(dev, iface);
+	usb_enable_interface(dev, iface, true);
 	if (device_is_registered(&iface->dev)) {
 		usb_create_sysfs_intf_files(iface);
 		create_intf_ep_devs(iface);
@@ -1382,7 +1387,7 @@ int usb_reset_configuration(struct usb_device *dev)
 			usb_remove_sysfs_intf_files(intf);
 		}
 		intf->cur_altsetting = alt;
-		usb_enable_interface(dev, intf);
+		usb_enable_interface(dev, intf, true);
 		if (device_is_registered(&intf->dev)) {
 			usb_create_sysfs_intf_files(intf);
 			create_intf_ep_devs(intf);
@@ -1685,7 +1690,7 @@ free_interfaces:
 			alt = &intf->altsetting[0];
 
 		intf->cur_altsetting = alt;
-		usb_enable_interface(dev, intf);
+		usb_enable_interface(dev, intf, true);
 		intf->dev.parent = &dev->dev;
 		intf->dev.driver = NULL;
 		intf->dev.bus = &usb_bus_type;

drivers/usb/core/usb.c

@@ -362,7 +362,7 @@ struct usb_device *usb_alloc_dev(struct usb_device *parent,
 	dev->ep0.desc.bLength = USB_DT_ENDPOINT_SIZE;
 	dev->ep0.desc.bDescriptorType = USB_DT_ENDPOINT;
 	/* ep0 maxpacket comes later, from device descriptor */
-	usb_enable_endpoint(dev, &dev->ep0);
+	usb_enable_endpoint(dev, &dev->ep0, true);
 	dev->can_submit = 1;
 
 	/* Save readable and stable topology id, distinguishing devices

drivers/usb/core/usb.h

@@ -12,7 +12,9 @@ extern int usb_create_ep_devs(struct device *parent,
 extern void usb_remove_ep_devs(struct usb_host_endpoint *endpoint);
 
 extern void usb_enable_endpoint(struct usb_device *dev,
-		struct usb_host_endpoint *ep);
+		struct usb_host_endpoint *ep, bool reset_toggle);
+extern void usb_enable_interface(struct usb_device *dev,
+		struct usb_interface *intf, bool reset_toggles);
 extern void usb_disable_endpoint(struct usb_device *dev, unsigned int epaddr);
 extern void usb_disable_interface(struct usb_device *dev,
 		struct usb_interface *intf);