Merge tag 'clk-for-linus-3.13' of git://git.linaro.org/people/mturquette/linux

Pull clock framework changes from Mike Turquette:
 "The clock changes for 3.13 are an even mix of framework improvements &
  bug fixes along with updates to existing clock drivers and the
  additional of new clock drivers"

* tag 'clk-for-linus-3.13' of git://git.linaro.org/people/mturquette/linux:
  clk: new driver for efm32 SoC
  clk: of: helper for determining number of parent clocks
  clk/zynq: Fix possible memory leak
  clk: keystone: Build Keystone clock drivers
  clk: keystone: Add gate control clock driver
  clk: keystone: add Keystone PLL clock driver
  Documentation: Add documentation for APM X-Gene clock binding
  clk: arm64: Add DTS clock entry for APM X-Gene Storm SoC
  clk: Add APM X-Gene SoC clock driver
  clk: wm831x: get rid of the implementation of remove function
  clk: Correct lookup logic in clk_fetch_parent_index()
  clk: Use kcalloc() to allocate arrays
  clk: Add error handling to clk_fetch_parent_index()

Documentation/devicetree/bindings/clock/efm32-clock.txt

@@ -0,0 +1,11 @@
+* Clock bindings for Energy Micro efm32 Giant Gecko's Clock Management Unit
+
+Required properties:
+- compatible: Should be "efm32gg,cmu"
+- reg: Base address and length of the register set
+- interrupts: Interrupt used by the CMU
+- #clock-cells: Should be <1>
+
+The clock consumer should specify the desired clock by having the clock ID in
+its "clocks" phandle cell. The header efm32-clk.h contains a list of available
+IDs.

Documentation/devicetree/bindings/clock/keystone-gate.txt

@@ -0,0 +1,29 @@
+Status: Unstable - ABI compatibility may be broken in the future
+
+Binding for Keystone gate control driver which uses PSC controller IP.
+
+This binding uses the common clock binding[1].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible : shall be "ti,keystone,psc-clock".
+- #clock-cells : from common clock binding; shall be set to 0.
+- clocks : parent clock phandle
+- reg :	psc control and domain address address space
+- reg-names : psc control and domain registers
+- domain-id : psc domain id needed to check the transition state register
+
+Optional properties:
+- clock-output-names : From common clock binding to override the
+			default output clock name
+Example:
+	clkusb: clkusb {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk16>;
+		clock-output-names = "usb";
+		reg = <0x02350008 0xb00>, <0x02350000 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <0>;
+	};

Documentation/devicetree/bindings/clock/keystone-pll.txt

@@ -0,0 +1,84 @@
+Status: Unstable - ABI compatibility may be broken in the future
+
+Binding for keystone PLLs. The main PLL IP typically has a multiplier,
+a divider and a post divider. The additional PLL IPs like ARMPLL, DDRPLL
+and PAPLL are controlled by the memory mapped register where as the Main
+PLL is controlled by a PLL controller registers along with memory mapped
+registers.
+
+This binding uses the common clock binding[1].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- #clock-cells : from common clock binding; shall be set to 0.
+- compatible : shall be "ti,keystone,main-pll-clock" or "ti,keystone,pll-clock"
+- clocks : parent clock phandle
+- reg - pll control0 and pll multipler registers
+- reg-names : control and multiplier. The multiplier is applicable only for
+		main pll clock
+- fixed-postdiv : fixed post divider value
+
+Example:
+	mainpllclk: mainpllclk@2310110 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,main-pll-clock";
+		clocks = <&refclkmain>;
+		reg = <0x02620350 4>, <0x02310110 4>;
+		reg-names = "control", "multiplier";
+		fixed-postdiv = <2>;
+	};
+
+	papllclk: papllclk@2620358 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,pll-clock";
+		clocks = <&refclkmain>;
+		clock-output-names = "pa-pll-clk";
+		reg = <0x02620358 4>;
+		reg-names = "control";
+		fixed-postdiv = <6>;
+	};
+
+Required properties:
+- #clock-cells : from common clock binding; shall be set to 0.
+- compatible : shall be "ti,keystone,pll-mux-clock"
+- clocks : link phandles of parent clocks
+- reg - pll mux register
+- bit-shift : number of bits to shift the bit-mask
+- bit-mask : arbitrary bitmask for programming the mux
+
+Optional properties:
+- clock-output-names : From common clock binding.
+
+Example:
+	mainmuxclk: mainmuxclk@2310108 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,pll-mux-clock";
+		clocks = <&mainpllclk>, <&refclkmain>;
+		reg = <0x02310108 4>;
+		bit-shift = <23>;
+		bit-mask = <1>;
+		clock-output-names = "mainmuxclk";
+	};
+
+Required properties:
+- #clock-cells : from common clock binding; shall be set to 0.
+- compatible : shall be "ti,keystone,pll-divider-clock"
+- clocks : parent clock phandle
+- reg - pll mux register
+- bit-shift : number of bits to shift the bit-mask
+- bit-mask : arbitrary bitmask for programming the divider
+
+Optional properties:
+- clock-output-names : From common clock binding.
+
+Example:
+	gemtraceclk: gemtraceclk@2310120 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,pll-divider-clock";
+		clocks = <&mainmuxclk>;
+		reg = <0x02310120 4>;
+		bit-shift = <0>;
+		bit-mask = <8>;
+		clock-output-names = "gemtraceclk";
+	};

Documentation/devicetree/bindings/clock/xgene.txt

@@ -0,0 +1,111 @@
+Device Tree Clock bindings for APM X-Gene
+
+This binding uses the common clock binding[1].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible : shall be one of the following:
+	"apm,xgene-socpll-clock" - for a X-Gene SoC PLL clock
+	"apm,xgene-pcppll-clock" - for a X-Gene PCP PLL clock
+	"apm,xgene-device-clock" - for a X-Gene device clock
+
+Required properties for SoC or PCP PLL clocks:
+- reg : shall be the physical PLL register address for the pll clock.
+- clocks : shall be the input parent clock phandle for the clock. This should
+	be the reference clock.
+- #clock-cells : shall be set to 1.
+- clock-output-names : shall be the name of the PLL referenced by derive
+  clock.
+Optional properties for PLL clocks:
+- clock-names : shall be the name of the PLL. If missing, use the device name.
+
+Required properties for device clocks:
+- reg : shall be a list of address and length pairs describing the CSR
+         reset and/or the divider. Either may be omitted, but at least
+         one must be present.
+ - reg-names : shall be a string list describing the reg resource. This
+               may include "csr-reg" and/or "div-reg". If this property
+               is not present, the reg property is assumed to describe
+               only "csr-reg".
+- clocks : shall be the input parent clock phandle for the clock.
+- #clock-cells : shall be set to 1.
+- clock-output-names : shall be the name of the device referenced.
+Optional properties for device clocks:
+- clock-names : shall be the name of the device clock. If missing, use the
+                device name.
+- csr-offset : Offset to the CSR reset register from the reset address base.
+               Default is 0.
+- csr-mask : CSR reset mask bit. Default is 0xF.
+- enable-offset : Offset to the enable register from the reset address base.
+                  Default is 0x8.
+- enable-mask : CSR enable mask bit. Default is 0xF.
+- divider-offset : Offset to the divider CSR register from the divider base.
+                   Default is 0x0.
+- divider-width : Width of the divider register. Default is 0.
+- divider-shift : Bit shift of the divider register. Default is 0.
+
+For example:
+
+	pcppll: pcppll@17000100 {
+		compatible = "apm,xgene-pcppll-clock";
+		#clock-cells = <1>;
+		clocks = <&refclk 0>;
+		clock-names = "pcppll";
+		reg = <0x0 0x17000100 0x0 0x1000>;
+		clock-output-names = "pcppll";
+		type = <0>;
+	};
+
+	socpll: socpll@17000120 {
+		compatible = "apm,xgene-socpll-clock";
+		#clock-cells = <1>;
+		clocks = <&refclk 0>;
+		clock-names = "socpll";
+		reg = <0x0 0x17000120 0x0 0x1000>;
+		clock-output-names = "socpll";
+		type = <1>;
+	};
+
+	qmlclk: qmlclk {
+		compatible = "apm,xgene-device-clock";
+		#clock-cells = <1>;
+		clocks = <&socplldiv2 0>;
+		clock-names = "qmlclk";
+		reg = <0x0 0x1703C000 0x0 0x1000>;
+		reg-name = "csr-reg";
+		clock-output-names = "qmlclk";
+	};
+
+	ethclk: ethclk {
+		compatible = "apm,xgene-device-clock";
+		#clock-cells = <1>;
+		clocks = <&socplldiv2 0>;
+		clock-names = "ethclk";
+		reg = <0x0 0x17000000 0x0 0x1000>;
+		reg-names = "div-reg";
+		divider-offset = <0x238>;
+		divider-width = <0x9>;
+		divider-shift = <0x0>;
+		clock-output-names = "ethclk";
+	};
+
+	apbclk: apbclk {
+		compatible = "apm,xgene-device-clock";
+		#clock-cells = <1>;
+		clocks = <&ahbclk 0>;
+		clock-names = "apbclk";
+		reg = <0x0 0x1F2AC000 0x0 0x1000
+			0x0 0x1F2AC000 0x0 0x1000>;
+		reg-names = "csr-reg", "div-reg";
+		csr-offset = <0x0>;
+		csr-mask = <0x200>;
+		enable-offset = <0x8>;
+		enable-mask = <0x200>;
+		divider-offset = <0x10>;
+		divider-width = <0x2>;
+		divider-shift = <0x0>;
+		flags = <0x8>;
+		clock-output-names = "apbclk";
+	};
+

arch/arm64/boot/dts/apm-storm.dtsi

@@ -103,6 +103,81 @@
 		#size-cells = <2>;
 		ranges;
 
+		clocks {
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			refclk: refclk {
+				compatible = "fixed-clock";
+				#clock-cells = <1>;
+				clock-frequency = <100000000>;
+				clock-output-names = "refclk";
+			};
+
+			pcppll: pcppll@17000100 {
+				compatible = "apm,xgene-pcppll-clock";
+				#clock-cells = <1>;
+				clocks = <&refclk 0>;
+				clock-names = "pcppll";
+				reg = <0x0 0x17000100 0x0 0x1000>;
+				clock-output-names = "pcppll";
+				type = <0>;
+			};
+
+			socpll: socpll@17000120 {
+				compatible = "apm,xgene-socpll-clock";
+				#clock-cells = <1>;
+				clocks = <&refclk 0>;
+				clock-names = "socpll";
+				reg = <0x0 0x17000120 0x0 0x1000>;
+				clock-output-names = "socpll";
+				type = <1>;
+			};
+
+			socplldiv2: socplldiv2  {
+				compatible = "fixed-factor-clock";
+				#clock-cells = <1>;
+				clocks = <&socpll 0>;
+				clock-names = "socplldiv2";
+				clock-mult = <1>;
+				clock-div = <2>;
+				clock-output-names = "socplldiv2";
+			};
+
+			qmlclk: qmlclk {
+				compatible = "apm,xgene-device-clock";
+				#clock-cells = <1>;
+				clocks = <&socplldiv2 0>;
+				clock-names = "qmlclk";
+				reg = <0x0 0x1703C000 0x0 0x1000>;
+				reg-names = "csr-reg";
+				clock-output-names = "qmlclk";
+			};
+
+			ethclk: ethclk {
+				compatible = "apm,xgene-device-clock";
+				#clock-cells = <1>;
+				clocks = <&socplldiv2 0>;
+				clock-names = "ethclk";
+				reg = <0x0 0x17000000 0x0 0x1000>;
+				reg-names = "div-reg";
+				divider-offset = <0x238>;
+				divider-width = <0x9>;
+				divider-shift = <0x0>;
+				clock-output-names = "ethclk";
+			};
+
+			eth8clk: eth8clk {
+				compatible = "apm,xgene-device-clock";
+				#clock-cells = <1>;
+				clocks = <&ethclk 0>;
+				clock-names = "eth8clk";
+				reg = <0x0 0x1702C000 0x0 0x1000>;
+				reg-names = "csr-reg";
+				clock-output-names = "eth8clk";
+			};
+		};
+
 		serial0: serial@1c020000 {
 			device_type = "serial";
 			compatible = "ns16550";

drivers/clk/Kconfig

@@ -93,6 +93,20 @@ config CLK_PPC_CORENET
 	  This adds the clock driver support for Freescale PowerPC corenet
 	  platforms using common clock framework.
 
+config COMMON_CLK_XGENE
+	bool "Clock driver for APM XGene SoC"
+	default y
+	depends on ARM64
+	---help---
+	  Sypport for the APM X-Gene SoC reference, PLL, and device clocks.
+
+config COMMON_CLK_KEYSTONE
+	tristate "Clock drivers for Keystone based SOCs"
+	depends on ARCH_KEYSTONE && OF
+	---help---
+          Supports clock drivers for Keystone based SOCs. These SOCs have local
+	  a power sleep control module that gate the clock to the IPs and PLLs.
+
 endmenu
 
 source "drivers/clk/mvebu/Kconfig"

drivers/clk/Makefile

@@ -11,6 +11,7 @@ obj-$(CONFIG_COMMON_CLK)	+= clk-composite.o
 
 # SoCs specific
 obj-$(CONFIG_ARCH_BCM2835)	+= clk-bcm2835.o
+obj-$(CONFIG_ARCH_EFM32)	+= clk-efm32gg.o
 obj-$(CONFIG_ARCH_NOMADIK)	+= clk-nomadik.o
 obj-$(CONFIG_ARCH_HIGHBANK)	+= clk-highbank.o
 obj-$(CONFIG_ARCH_NSPIRE)	+= clk-nspire.o
@@ -32,6 +33,8 @@ obj-$(CONFIG_ARCH_VT8500)	+= clk-vt8500.o
 obj-$(CONFIG_ARCH_ZYNQ)		+= zynq/
 obj-$(CONFIG_ARCH_TEGRA)	+= tegra/
 obj-$(CONFIG_PLAT_SAMSUNG)	+= samsung/
+obj-$(CONFIG_COMMON_CLK_XGENE)  += clk-xgene.o
+obj-$(CONFIG_COMMON_CLK_KEYSTONE)	+= keystone/
 
 obj-$(CONFIG_X86)		+= x86/
 

drivers/clk/clk-efm32gg.c

@@ -0,0 +1,81 @@
+/*
+ * Copyright (C) 2013 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/clk-provider.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+
+#include <dt-bindings/clock/efm32-cmu.h>
+
+#define CMU_HFPERCLKEN0		0x44
+
+static struct clk *clk[37];
+static struct clk_onecell_data clk_data = {
+	.clks = clk,
+	.clk_num = ARRAY_SIZE(clk),
+};
+
+static int __init efm32gg_cmu_init(struct device_node *np)
+{
+	int i;
+	void __iomem *base;
+
+	for (i = 0; i < ARRAY_SIZE(clk); ++i)
+		clk[i] = ERR_PTR(-ENOENT);
+
+	base = of_iomap(np, 0);
+	if (!base) {
+		pr_warn("Failed to map address range for efm32gg,cmu node\n");
+		return -EADDRNOTAVAIL;
+	}
+
+	clk[clk_HFXO] = clk_register_fixed_rate(NULL, "HFXO", NULL,
+			CLK_IS_ROOT, 48000000);
+
+	clk[clk_HFPERCLKUSART0] = clk_register_gate(NULL, "HFPERCLK.USART0",
+			"HFXO", 0, base + CMU_HFPERCLKEN0, 0, 0, NULL);
+	clk[clk_HFPERCLKUSART1] = clk_register_gate(NULL, "HFPERCLK.USART1",
+			"HFXO", 0, base + CMU_HFPERCLKEN0, 1, 0, NULL);
+	clk[clk_HFPERCLKUSART2] = clk_register_gate(NULL, "HFPERCLK.USART2",
+			"HFXO", 0, base + CMU_HFPERCLKEN0, 2, 0, NULL);
+	clk[clk_HFPERCLKUART0] = clk_register_gate(NULL, "HFPERCLK.UART0",
+			"HFXO", 0, base + CMU_HFPERCLKEN0, 3, 0, NULL);
+	clk[clk_HFPERCLKUART1] = clk_register_gate(NULL, "HFPERCLK.UART1",
+			"HFXO", 0, base + CMU_HFPERCLKEN0, 4, 0, NULL);
+	clk[clk_HFPERCLKTIMER0] = clk_register_gate(NULL, "HFPERCLK.TIMER0",
+			"HFXO", 0, base + CMU_HFPERCLKEN0, 5, 0, NULL);
+	clk[clk_HFPERCLKTIMER1] = clk_register_gate(NULL, "HFPERCLK.TIMER1",
+			"HFXO", 0, base + CMU_HFPERCLKEN0, 6, 0, NULL);
+	clk[clk_HFPERCLKTIMER2] = clk_register_gate(NULL, "HFPERCLK.TIMER2",
+			"HFXO", 0, base + CMU_HFPERCLKEN0, 7, 0, NULL);
+	clk[clk_HFPERCLKTIMER3] = clk_register_gate(NULL, "HFPERCLK.TIMER3",
+			"HFXO", 0, base + CMU_HFPERCLKEN0, 8, 0, NULL);
+	clk[clk_HFPERCLKACMP0] = clk_register_gate(NULL, "HFPERCLK.ACMP0",
+			"HFXO", 0, base + CMU_HFPERCLKEN0, 9, 0, NULL);
+	clk[clk_HFPERCLKACMP1] = clk_register_gate(NULL, "HFPERCLK.ACMP1",
+			"HFXO", 0, base + CMU_HFPERCLKEN0, 10, 0, NULL);
+	clk[clk_HFPERCLKI2C0] = clk_register_gate(NULL, "HFPERCLK.I2C0",
+			"HFXO", 0, base + CMU_HFPERCLKEN0, 11, 0, NULL);
+	clk[clk_HFPERCLKI2C1] = clk_register_gate(NULL, "HFPERCLK.I2C1",
+			"HFXO", 0, base + CMU_HFPERCLKEN0, 12, 0, NULL);
+	clk[clk_HFPERCLKGPIO] = clk_register_gate(NULL, "HFPERCLK.GPIO",
+			"HFXO", 0, base + CMU_HFPERCLKEN0, 13, 0, NULL);
+	clk[clk_HFPERCLKVCMP] = clk_register_gate(NULL, "HFPERCLK.VCMP",
+			"HFXO", 0, base + CMU_HFPERCLKEN0, 14, 0, NULL);
+	clk[clk_HFPERCLKPRS] = clk_register_gate(NULL, "HFPERCLK.PRS",
+			"HFXO", 0, base + CMU_HFPERCLKEN0, 15, 0, NULL);
+	clk[clk_HFPERCLKADC0] = clk_register_gate(NULL, "HFPERCLK.ADC0",
+			"HFXO", 0, base + CMU_HFPERCLKEN0, 16, 0, NULL);
+	clk[clk_HFPERCLKDAC0] = clk_register_gate(NULL, "HFPERCLK.DAC0",
+			"HFXO", 0, base + CMU_HFPERCLKEN0, 17, 0, NULL);
+
+	return of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
+}
+CLK_OF_DECLARE(efm32ggcmu, "efm32gg,cmu", efm32gg_cmu_init);

drivers/clk/clk-wm831x.c

@@ -391,14 +391,8 @@ static int wm831x_clk_probe(struct platform_device *pdev)
 	return 0;
 }
 
-static int wm831x_clk_remove(struct platform_device *pdev)
-{
-	return 0;
-}
-
 static struct platform_driver wm831x_clk_driver = {
 	.probe = wm831x_clk_probe,
-	.remove = wm831x_clk_remove,
 	.driver		= {
 		.name	= "wm831x-clk",
 		.owner	= THIS_MODULE,

drivers/clk/clk-xgene.c

@@ -0,0 +1,521 @@
+/*
+ * clk-xgene.c - AppliedMicro X-Gene Clock Interface
+ *
+ * Copyright (c) 2013, Applied Micro Circuits Corporation
+ * Author: Loc Ho <lho@apm.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/clkdev.h>
+#include <linux/clk-provider.h>
+#include <linux/of_address.h>
+#include <asm/setup.h>
+
+/* Register SCU_PCPPLL bit fields */
+#define N_DIV_RD(src)			(((src) & 0x000001ff))
+
+/* Register SCU_SOCPLL bit fields */
+#define CLKR_RD(src)			(((src) & 0x07000000)>>24)
+#define CLKOD_RD(src)			(((src) & 0x00300000)>>20)
+#define REGSPEC_RESET_F1_MASK		0x00010000
+#define CLKF_RD(src)			(((src) & 0x000001ff))
+
+#define XGENE_CLK_DRIVER_VER		"0.1"
+
+static DEFINE_SPINLOCK(clk_lock);
+
+static inline u32 xgene_clk_read(void *csr)
+{
+	return readl_relaxed(csr);
+}
+
+static inline void xgene_clk_write(u32 data, void *csr)
+{
+	return writel_relaxed(data, csr);
+}
+
+/* PLL Clock */
+enum xgene_pll_type {
+	PLL_TYPE_PCP = 0,
+	PLL_TYPE_SOC = 1,
+};
+
+struct xgene_clk_pll {
+	struct clk_hw	hw;
+	const char	*name;
+	void __iomem	*reg;
+	spinlock_t	*lock;
+	u32		pll_offset;
+	enum xgene_pll_type	type;
+};
+
+#define to_xgene_clk_pll(_hw) container_of(_hw, struct xgene_clk_pll, hw)
+
+static int xgene_clk_pll_is_enabled(struct clk_hw *hw)
+{
+	struct xgene_clk_pll *pllclk = to_xgene_clk_pll(hw);
+	u32 data;
+
+	data = xgene_clk_read(pllclk->reg + pllclk->pll_offset);
+	pr_debug("%s pll %s\n", pllclk->name,
+		data & REGSPEC_RESET_F1_MASK ? "disabled" : "enabled");
+
+	return data & REGSPEC_RESET_F1_MASK ? 0 : 1;
+}
+
+static unsigned long xgene_clk_pll_recalc_rate(struct clk_hw *hw,
+				unsigned long parent_rate)
+{
+	struct xgene_clk_pll *pllclk = to_xgene_clk_pll(hw);
+	unsigned long fref;
+	unsigned long fvco;
+	u32 pll;
+	u32 nref;
+	u32 nout;
+	u32 nfb;
+
+	pll = xgene_clk_read(pllclk->reg + pllclk->pll_offset);
+
+	if (pllclk->type == PLL_TYPE_PCP) {
+		/*
+		 * PLL VCO = Reference clock * NF
+		 * PCP PLL = PLL_VCO / 2
+		 */
+		nout = 2;
+		fvco = parent_rate * (N_DIV_RD(pll) + 4);
+	} else {
+		/*
+		 * Fref = Reference Clock / NREF;
+		 * Fvco = Fref * NFB;
+		 * Fout = Fvco / NOUT;
+		 */
+		nref = CLKR_RD(pll) + 1;
+		nout = CLKOD_RD(pll) + 1;
+		nfb = CLKF_RD(pll);
+		fref = parent_rate / nref;
+		fvco = fref * nfb;
+	}
+	pr_debug("%s pll recalc rate %ld parent %ld\n", pllclk->name,
+		fvco / nout, parent_rate);
+
+	return fvco / nout;
+}
+
+const struct clk_ops xgene_clk_pll_ops = {
+	.is_enabled = xgene_clk_pll_is_enabled,
+	.recalc_rate = xgene_clk_pll_recalc_rate,
+};
+
+static struct clk *xgene_register_clk_pll(struct device *dev,
+	const char *name, const char *parent_name,
+	unsigned long flags, void __iomem *reg, u32 pll_offset,
+	u32 type, spinlock_t *lock)
+{
+	struct xgene_clk_pll *apmclk;
+	struct clk *clk;
+	struct clk_init_data init;
+
+	/* allocate the APM clock structure */
+	apmclk = kzalloc(sizeof(*apmclk), GFP_KERNEL);
+	if (!apmclk) {
+		pr_err("%s: could not allocate APM clk\n", __func__);
+		return ERR_PTR(-ENOMEM);
+	}
+
+	init.name = name;
+	init.ops = &xgene_clk_pll_ops;
+	init.flags = flags;
+	init.parent_names = parent_name ? &parent_name : NULL;
+	init.num_parents = parent_name ? 1 : 0;
+
+	apmclk->name = name;
+	apmclk->reg = reg;
+	apmclk->lock = lock;
+	apmclk->pll_offset = pll_offset;
+	apmclk->type = type;
+	apmclk->hw.init = &init;
+
+	/* Register the clock */
+	clk = clk_register(dev, &apmclk->hw);
+	if (IS_ERR(clk)) {
+		pr_err("%s: could not register clk %s\n", __func__, name);
+		kfree(apmclk);
+		return NULL;
+	}
+	return clk;
+}
+
+static void xgene_pllclk_init(struct device_node *np, enum xgene_pll_type pll_type)
+{
+        const char *clk_name = np->full_name;
+        struct clk *clk;
+        void *reg;
+
+        reg = of_iomap(np, 0);
+        if (reg == NULL) {
+                pr_err("Unable to map CSR register for %s\n", np->full_name);
+                return;
+        }
+        of_property_read_string(np, "clock-output-names", &clk_name);
+        clk = xgene_register_clk_pll(NULL,
+                        clk_name, of_clk_get_parent_name(np, 0),
+                        CLK_IS_ROOT, reg, 0, pll_type, &clk_lock);
+        if (!IS_ERR(clk)) {
+                of_clk_add_provider(np, of_clk_src_simple_get, clk);
+                clk_register_clkdev(clk, clk_name, NULL);
+                pr_debug("Add %s clock PLL\n", clk_name);
+        }
+}
+
+static void xgene_socpllclk_init(struct device_node *np)
+{
+	xgene_pllclk_init(np, PLL_TYPE_SOC);
+}
+
+static void xgene_pcppllclk_init(struct device_node *np)
+{
+	xgene_pllclk_init(np, PLL_TYPE_PCP);
+}
+
+/* IP Clock */
+struct xgene_dev_parameters {
+	void __iomem *csr_reg;		/* CSR for IP clock */
+	u32 reg_clk_offset;		/* Offset to clock enable CSR */
+	u32 reg_clk_mask;		/* Mask bit for clock enable */
+	u32 reg_csr_offset;		/* Offset to CSR reset */
+	u32 reg_csr_mask;		/* Mask bit for disable CSR reset */
+	void __iomem *divider_reg;	/* CSR for divider */
+	u32 reg_divider_offset;		/* Offset to divider register */
+	u32 reg_divider_shift;		/* Bit shift to divider field */
+	u32 reg_divider_width;		/* Width of the bit to divider field */
+};
+
+struct xgene_clk {
+	struct clk_hw	hw;
+	const char	*name;
+	spinlock_t	*lock;
+	struct xgene_dev_parameters	param;
+};
+
+#define to_xgene_clk(_hw) container_of(_hw, struct xgene_clk, hw)
+
+static int xgene_clk_enable(struct clk_hw *hw)
+{
+	struct xgene_clk *pclk = to_xgene_clk(hw);
+	unsigned long flags = 0;
+	u32 data;
+
+	if (pclk->lock)
+		spin_lock_irqsave(pclk->lock, flags);
+
+	if (pclk->param.csr_reg != NULL) {
+		pr_debug("%s clock enabled\n", pclk->name);
+		/* First enable the clock */
+		data = xgene_clk_read(pclk->param.csr_reg +
+					pclk->param.reg_clk_offset);
+		data |= pclk->param.reg_clk_mask;
+		xgene_clk_write(data, pclk->param.csr_reg +
+					pclk->param.reg_clk_offset);
+		pr_debug("%s clock PADDR base 0x%016LX clk offset 0x%08X mask 0x%08X value 0x%08X\n",
+			pclk->name, __pa(pclk->param.csr_reg),
+			pclk->param.reg_clk_offset, pclk->param.reg_clk_mask,
+			data);
+
+		/* Second enable the CSR */
+		data = xgene_clk_read(pclk->param.csr_reg +
+					pclk->param.reg_csr_offset);
+		data &= ~pclk->param.reg_csr_mask;
+		xgene_clk_write(data, pclk->param.csr_reg +
+					pclk->param.reg_csr_offset);
+		pr_debug("%s CSR RESET PADDR base 0x%016LX csr offset 0x%08X mask 0x%08X value 0x%08X\n",
+			pclk->name, __pa(pclk->param.csr_reg),
+			pclk->param.reg_csr_offset, pclk->param.reg_csr_mask,
+			data);
+	}
+
+	if (pclk->lock)
+		spin_unlock_irqrestore(pclk->lock, flags);
+
+	return 0;
+}
+
+static void xgene_clk_disable(struct clk_hw *hw)
+{
+	struct xgene_clk *pclk = to_xgene_clk(hw);
+	unsigned long flags = 0;
+	u32 data;
+
+	if (pclk->lock)
+		spin_lock_irqsave(pclk->lock, flags);
+
+	if (pclk->param.csr_reg != NULL) {
+		pr_debug("%s clock disabled\n", pclk->name);
+		/* First put the CSR in reset */
+		data = xgene_clk_read(pclk->param.csr_reg +
+					pclk->param.reg_csr_offset);
+		data |= pclk->param.reg_csr_mask;
+		xgene_clk_write(data, pclk->param.csr_reg +
+					pclk->param.reg_csr_offset);
+
+		/* Second disable the clock */
+		data = xgene_clk_read(pclk->param.csr_reg +
+					pclk->param.reg_clk_offset);
+		data &= ~pclk->param.reg_clk_mask;
+		xgene_clk_write(data, pclk->param.csr_reg +
+					pclk->param.reg_clk_offset);
+	}
+
+	if (pclk->lock)
+		spin_unlock_irqrestore(pclk->lock, flags);
+}
+
+static int xgene_clk_is_enabled(struct clk_hw *hw)
+{
+	struct xgene_clk *pclk = to_xgene_clk(hw);
+	u32 data = 0;
+
+	if (pclk->param.csr_reg != NULL) {
+		pr_debug("%s clock checking\n", pclk->name);
+		data = xgene_clk_read(pclk->param.csr_reg +
+					pclk->param.reg_clk_offset);
+		pr_debug("%s clock is %s\n", pclk->name,
+			data & pclk->param.reg_clk_mask ? "enabled" :
+							"disabled");
+	}
+
+	if (pclk->param.csr_reg == NULL)
+		return 1;
+	return data & pclk->param.reg_clk_mask ? 1 : 0;
+}
+
+static unsigned long xgene_clk_recalc_rate(struct clk_hw *hw,
+				unsigned long parent_rate)
+{
+	struct xgene_clk *pclk = to_xgene_clk(hw);
+	u32 data;
+
+	if (pclk->param.divider_reg) {
+		data = xgene_clk_read(pclk->param.divider_reg +
+					pclk->param.reg_divider_offset);
+		data >>= pclk->param.reg_divider_shift;
+		data &= (1 << pclk->param.reg_divider_width) - 1;
+
+		pr_debug("%s clock recalc rate %ld parent %ld\n",
+			pclk->name, parent_rate / data, parent_rate);
+		return parent_rate / data;
+	} else {
+		pr_debug("%s clock recalc rate %ld parent %ld\n",
+			pclk->name, parent_rate, parent_rate);
+		return parent_rate;
+	}
+}
+
+static int xgene_clk_set_rate(struct clk_hw *hw, unsigned long rate,
+				unsigned long parent_rate)
+{
+	struct xgene_clk *pclk = to_xgene_clk(hw);
+	unsigned long flags = 0;
+	u32 data;
+	u32 divider;
+	u32 divider_save;
+
+	if (pclk->lock)
+		spin_lock_irqsave(pclk->lock, flags);
+
+	if (pclk->param.divider_reg) {
+		/* Let's compute the divider */
+		if (rate > parent_rate)
+			rate = parent_rate;
+		divider_save = divider = parent_rate / rate; /* Rounded down */
+		divider &= (1 << pclk->param.reg_divider_width) - 1;
+		divider <<= pclk->param.reg_divider_shift;
+
+		/* Set new divider */
+		data = xgene_clk_read(pclk->param.divider_reg +
+				pclk->param.reg_divider_offset);
+		data &= ~((1 << pclk->param.reg_divider_width) - 1);
+		data |= divider;
+		xgene_clk_write(data, pclk->param.divider_reg +
+					pclk->param.reg_divider_offset);
+		pr_debug("%s clock set rate %ld\n", pclk->name,
+			parent_rate / divider_save);
+	} else {
+		divider_save = 1;
+	}
+
+	if (pclk->lock)
+		spin_unlock_irqrestore(pclk->lock, flags);
+
+	return parent_rate / divider_save;
+}
+
+static long xgene_clk_round_rate(struct clk_hw *hw, unsigned long rate,
+				unsigned long *prate)
+{
+	struct xgene_clk *pclk = to_xgene_clk(hw);
+	unsigned long parent_rate = *prate;
+	u32 divider;
+
+	if (pclk->param.divider_reg) {
+		/* Let's compute the divider */
+		if (rate > parent_rate)
+			rate = parent_rate;
+		divider = parent_rate / rate;   /* Rounded down */
+	} else {
+		divider = 1;
+	}
+
+	return parent_rate / divider;
+}
+
+const struct clk_ops xgene_clk_ops = {
+	.enable = xgene_clk_enable,
+	.disable = xgene_clk_disable,
+	.is_enabled = xgene_clk_is_enabled,
+	.recalc_rate = xgene_clk_recalc_rate,
+	.set_rate = xgene_clk_set_rate,
+	.round_rate = xgene_clk_round_rate,
+};
+
+static struct clk *xgene_register_clk(struct device *dev,
+		const char *name, const char *parent_name,
+		struct xgene_dev_parameters *parameters, spinlock_t *lock)
+{
+	struct xgene_clk *apmclk;
+	struct clk *clk;
+	struct clk_init_data init;
+	int rc;
+
+	/* allocate the APM clock structure */
+	apmclk = kzalloc(sizeof(*apmclk), GFP_KERNEL);
+	if (!apmclk) {
+		pr_err("%s: could not allocate APM clk\n", __func__);
+		return ERR_PTR(-ENOMEM);
+	}
+
+	init.name = name;
+	init.ops = &xgene_clk_ops;
+	init.flags = 0;
+	init.parent_names = parent_name ? &parent_name : NULL;
+	init.num_parents = parent_name ? 1 : 0;
+
+	apmclk->name = name;
+	apmclk->lock = lock;
+	apmclk->hw.init = &init;
+	apmclk->param = *parameters;
+
+	/* Register the clock */
+	clk = clk_register(dev, &apmclk->hw);
+	if (IS_ERR(clk)) {
+		pr_err("%s: could not register clk %s\n", __func__, name);
+		kfree(apmclk);
+		return clk;
+	}
+
+	/* Register the clock for lookup */
+	rc = clk_register_clkdev(clk, name, NULL);
+	if (rc != 0) {
+		pr_err("%s: could not register lookup clk %s\n",
+			__func__, name);
+	}
+	return clk;
+}
+
+static void __init xgene_devclk_init(struct device_node *np)
+{
+	const char *clk_name = np->full_name;
+	struct clk *clk;
+	struct resource res;
+	int rc;
+	struct xgene_dev_parameters parameters;
+	int i;
+
+	/* Check if the entry is disabled */
+        if (!of_device_is_available(np))
+                return;
+
+	/* Parse the DTS register for resource */
+	parameters.csr_reg = NULL;
+	parameters.divider_reg = NULL;
+	for (i = 0; i < 2; i++) {
+		void *map_res;
+		rc = of_address_to_resource(np, i, &res);
+		if (rc != 0) {
+			if (i == 0) {
+				pr_err("no DTS register for %s\n", 
+					np->full_name);
+				return;
+			}
+			break;
+		}
+		map_res = of_iomap(np, i);
+		if (map_res == NULL) {
+			pr_err("Unable to map resource %d for %s\n",
+				i, np->full_name);
+			goto err;
+		}
+		if (strcmp(res.name, "div-reg") == 0)
+			parameters.divider_reg = map_res;
+		else /* if (strcmp(res->name, "csr-reg") == 0) */
+			parameters.csr_reg = map_res;
+	}
+	if (of_property_read_u32(np, "csr-offset", &parameters.reg_csr_offset))
+		parameters.reg_csr_offset = 0;
+	if (of_property_read_u32(np, "csr-mask", &parameters.reg_csr_mask))
+		parameters.reg_csr_mask = 0xF;
+	if (of_property_read_u32(np, "enable-offset",
+				&parameters.reg_clk_offset))
+		parameters.reg_clk_offset = 0x8;
+	if (of_property_read_u32(np, "enable-mask", &parameters.reg_clk_mask))
+		parameters.reg_clk_mask = 0xF;
+	if (of_property_read_u32(np, "divider-offset",
+				&parameters.reg_divider_offset))
+		parameters.reg_divider_offset = 0;
+	if (of_property_read_u32(np, "divider-width",
+				&parameters.reg_divider_width))
+		parameters.reg_divider_width = 0;
+	if (of_property_read_u32(np, "divider-shift",
+				&parameters.reg_divider_shift))
+		parameters.reg_divider_shift = 0;
+	of_property_read_string(np, "clock-output-names", &clk_name);
+
+	clk = xgene_register_clk(NULL, clk_name,
+		of_clk_get_parent_name(np, 0), &parameters, &clk_lock);
+	if (IS_ERR(clk))
+		goto err;
+	pr_debug("Add %s clock\n", clk_name);
+	rc = of_clk_add_provider(np, of_clk_src_simple_get, clk);
+	if (rc != 0)
+		pr_err("%s: could register provider clk %s\n", __func__,
+			np->full_name);
+
+	return;
+
+err:
+	if (parameters.csr_reg)
+		iounmap(parameters.csr_reg);
+	if (parameters.divider_reg)
+		iounmap(parameters.divider_reg);
+}
+
+CLK_OF_DECLARE(xgene_socpll_clock, "apm,xgene-socpll-clock", xgene_socpllclk_init);
+CLK_OF_DECLARE(xgene_pcppll_clock, "apm,xgene-pcppll-clock", xgene_pcppllclk_init);
+CLK_OF_DECLARE(xgene_dev_clock, "apm,xgene-device-clock", xgene_devclk_init);

drivers/clk/clk.c

@@ -1080,13 +1080,16 @@ unsigned long clk_get_rate(struct clk *clk)
 }
 EXPORT_SYMBOL_GPL(clk_get_rate);
 
-static u8 clk_fetch_parent_index(struct clk *clk, struct clk *parent)
+static int clk_fetch_parent_index(struct clk *clk, struct clk *parent)
 {
-	u8 i;
+	int i;
 
-	if (!clk->parents)
-		clk->parents = kzalloc((sizeof(struct clk*) * clk->num_parents),
-								GFP_KERNEL);
+	if (!clk->parents) {
+		clk->parents = kcalloc(clk->num_parents,
+					sizeof(struct clk *), GFP_KERNEL);
+		if (!clk->parents)
+			return -ENOMEM;
+	}
 
 	/*
 	 * find index of new parent clock using cached parent ptrs,
@@ -1094,16 +1097,19 @@ static u8 clk_fetch_parent_index(struct clk *clk, struct clk *parent)
 	 * them now to avoid future calls to __clk_lookup.
 	 */
 	for (i = 0; i < clk->num_parents; i++) {
-		if (clk->parents && clk->parents[i] == parent)
-			break;
-		else if (!strcmp(clk->parent_names[i], parent->name)) {
-			if (clk->parents)
-				clk->parents[i] = __clk_lookup(parent->name);
-			break;
+		if (clk->parents[i] == parent)
+			return i;
+
+		if (clk->parents[i])
+			continue;
+
+		if (!strcmp(clk->parent_names[i], parent->name)) {
+			clk->parents[i] = __clk_lookup(parent->name);
+			return i;
 		}
 	}
 
-	return i;
+	return -EINVAL;
 }
 
 static void clk_reparent(struct clk *clk, struct clk *new_parent)
@@ -1265,7 +1271,7 @@ static struct clk *clk_calc_new_rates(struct clk *clk, unsigned long rate)
 	struct clk *old_parent, *parent;
 	unsigned long best_parent_rate = 0;
 	unsigned long new_rate;
-	u8 p_index = 0;
+	int p_index = 0;
 
 	/* sanity */
 	if (IS_ERR_OR_NULL(clk))
@@ -1306,7 +1312,7 @@ static struct clk *clk_calc_new_rates(struct clk *clk, unsigned long rate)
 	/* try finding the new parent index */
 	if (parent) {
 		p_index = clk_fetch_parent_index(clk, parent);
-		if (p_index == clk->num_parents) {
+		if (p_index < 0) {
 			pr_debug("%s: clk %s can not be parent of clk %s\n",
 				 __func__, parent->name, clk->name);
 			return NULL;
@@ -1532,7 +1538,7 @@ static struct clk *__clk_init_parent(struct clk *clk)
 
 	if (!clk->parents)
 		clk->parents =
-			kzalloc((sizeof(struct clk*) * clk->num_parents),
+			kcalloc(clk->num_parents, sizeof(struct clk *),
 					GFP_KERNEL);
 
 	ret = clk_get_parent_by_index(clk, index);
@@ -1568,7 +1574,7 @@ void __clk_reparent(struct clk *clk, struct clk *new_parent)
 int clk_set_parent(struct clk *clk, struct clk *parent)
 {
 	int ret = 0;
-	u8 p_index = 0;
+	int p_index = 0;
 	unsigned long p_rate = 0;
 
 	if (!clk)
@@ -1597,10 +1603,10 @@ int clk_set_parent(struct clk *clk, struct clk *parent)
 	if (parent) {
 		p_index = clk_fetch_parent_index(clk, parent);
 		p_rate = parent->rate;
-		if (p_index == clk->num_parents) {
+		if (p_index < 0) {
 			pr_debug("%s: clk %s can not be parent of clk %s\n",
 					__func__, parent->name, clk->name);
-			ret = -EINVAL;
+			ret = p_index;
 			goto out;
 		}
 	}
@@ -1689,8 +1695,8 @@ int __clk_init(struct device *dev, struct clk *clk)
 	 * for clock drivers to statically initialize clk->parents.
 	 */
 	if (clk->num_parents > 1 && !clk->parents) {
-		clk->parents = kzalloc((sizeof(struct clk*) * clk->num_parents),
-				GFP_KERNEL);
+		clk->parents = kcalloc(clk->num_parents, sizeof(struct clk *),
+					GFP_KERNEL);
 		/*
 		 * __clk_lookup returns NULL for parents that have not been
 		 * clk_init'd; thus any access to clk->parents[] must check
@@ -1830,8 +1836,8 @@ static int _clk_register(struct device *dev, struct clk_hw *hw, struct clk *clk)
 	hw->clk = clk;
 
 	/* allocate local copy in case parent_names is __initdata */
-	clk->parent_names = kzalloc((sizeof(char*) * clk->num_parents),
-			GFP_KERNEL);
+	clk->parent_names = kcalloc(clk->num_parents, sizeof(char *),
+					GFP_KERNEL);
 
 	if (!clk->parent_names) {
 		pr_err("%s: could not allocate clk->parent_names\n", __func__);
@@ -2196,6 +2202,12 @@ struct clk *of_clk_get_from_provider(struct of_phandle_args *clkspec)
 	return clk;
 }
 
+int of_clk_get_parent_count(struct device_node *np)
+{
+	return of_count_phandle_with_args(np, "clocks", "#clock-cells");
+}
+EXPORT_SYMBOL_GPL(of_clk_get_parent_count);
+
 const char *of_clk_get_parent_name(struct device_node *np, int index)
 {
 	struct of_phandle_args clkspec;

drivers/clk/keystone/Makefile

@@ -0,0 +1 @@
+obj-y			+= pll.o gate.o

drivers/clk/keystone/gate.c

@@ -0,0 +1,264 @@
+/*
+ * Clock driver for Keystone 2 based devices
+ *
+ * Copyright (C) 2013 Texas Instruments.
+ *	Murali Karicheri <m-karicheri2@ti.com>
+ *	Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/of_address.h>
+#include <linux/of.h>
+#include <linux/module.h>
+
+/* PSC register offsets */
+#define PTCMD			0x120
+#define PTSTAT			0x128
+#define PDSTAT			0x200
+#define PDCTL			0x300
+#define MDSTAT			0x800
+#define MDCTL			0xa00
+
+/* PSC module states */
+#define PSC_STATE_SWRSTDISABLE	0
+#define PSC_STATE_SYNCRST	1
+#define PSC_STATE_DISABLE	2
+#define PSC_STATE_ENABLE	3
+
+#define MDSTAT_STATE_MASK	0x3f
+#define MDSTAT_MCKOUT		BIT(12)
+#define PDSTAT_STATE_MASK	0x1f
+#define MDCTL_FORCE		BIT(31)
+#define MDCTL_LRESET		BIT(8)
+#define PDCTL_NEXT		BIT(0)
+
+/* Maximum timeout to bail out state transition for module */
+#define STATE_TRANS_MAX_COUNT	0xffff
+
+static void __iomem *domain_transition_base;
+
+/**
+ * struct clk_psc_data - PSC data
+ * @control_base: Base address for a PSC control
+ * @domain_base: Base address for a PSC domain
+ * @domain_id: PSC domain id number
+ */
+struct clk_psc_data {
+	void __iomem *control_base;
+	void __iomem *domain_base;
+	u32 domain_id;
+};
+
+/**
+ * struct clk_psc - PSC clock structure
+ * @hw: clk_hw for the psc
+ * @psc_data: PSC driver specific data
+ * @lock: Spinlock used by the driver
+ */
+struct clk_psc {
+	struct clk_hw hw;
+	struct clk_psc_data *psc_data;
+	spinlock_t *lock;
+};
+
+static DEFINE_SPINLOCK(psc_lock);
+
+#define to_clk_psc(_hw) container_of(_hw, struct clk_psc, hw)
+
+static void psc_config(void __iomem *control_base, void __iomem *domain_base,
+						u32 next_state, u32 domain_id)
+{
+	u32 ptcmd, pdstat, pdctl, mdstat, mdctl, ptstat;
+	u32 count = STATE_TRANS_MAX_COUNT;
+
+	mdctl = readl(control_base + MDCTL);
+	mdctl &= ~MDSTAT_STATE_MASK;
+	mdctl |= next_state;
+	/* For disable, we always put the module in local reset */
+	if (next_state == PSC_STATE_DISABLE)
+		mdctl &= ~MDCTL_LRESET;
+	writel(mdctl, control_base + MDCTL);
+
+	pdstat = readl(domain_base + PDSTAT);
+	if (!(pdstat & PDSTAT_STATE_MASK)) {
+		pdctl = readl(domain_base + PDCTL);
+		pdctl |= PDCTL_NEXT;
+		writel(pdctl, domain_base + PDCTL);
+	}
+
+	ptcmd = 1 << domain_id;
+	writel(ptcmd, domain_transition_base + PTCMD);
+	do {
+		ptstat = readl(domain_transition_base + PTSTAT);
+	} while (((ptstat >> domain_id) & 1) && count--);
+
+	count = STATE_TRANS_MAX_COUNT;
+	do {
+		mdstat = readl(control_base + MDSTAT);
+	} while (!((mdstat & MDSTAT_STATE_MASK) == next_state) && count--);
+}
+
+static int keystone_clk_is_enabled(struct clk_hw *hw)
+{
+	struct clk_psc *psc = to_clk_psc(hw);
+	struct clk_psc_data *data = psc->psc_data;
+	u32 mdstat = readl(data->control_base + MDSTAT);
+
+	return (mdstat & MDSTAT_MCKOUT) ? 1 : 0;
+}
+
+static int keystone_clk_enable(struct clk_hw *hw)
+{
+	struct clk_psc *psc = to_clk_psc(hw);
+	struct clk_psc_data *data = psc->psc_data;
+	unsigned long flags = 0;
+
+	if (psc->lock)
+		spin_lock_irqsave(psc->lock, flags);
+
+	psc_config(data->control_base, data->domain_base,
+				PSC_STATE_ENABLE, data->domain_id);
+
+	if (psc->lock)
+		spin_unlock_irqrestore(psc->lock, flags);
+
+	return 0;
+}
+
+static void keystone_clk_disable(struct clk_hw *hw)
+{
+	struct clk_psc *psc = to_clk_psc(hw);
+	struct clk_psc_data *data = psc->psc_data;
+	unsigned long flags = 0;
+
+	if (psc->lock)
+		spin_lock_irqsave(psc->lock, flags);
+
+	psc_config(data->control_base, data->domain_base,
+				PSC_STATE_DISABLE, data->domain_id);
+
+	if (psc->lock)
+		spin_unlock_irqrestore(psc->lock, flags);
+}
+
+static const struct clk_ops clk_psc_ops = {
+	.enable = keystone_clk_enable,
+	.disable = keystone_clk_disable,
+	.is_enabled = keystone_clk_is_enabled,
+};
+
+/**
+ * clk_register_psc - register psc clock
+ * @dev: device that is registering this clock
+ * @name: name of this clock
+ * @parent_name: name of clock's parent
+ * @psc_data: platform data to configure this clock
+ * @lock: spinlock used by this clock
+ */
+static struct clk *clk_register_psc(struct device *dev,
+			const char *name,
+			const char *parent_name,
+			struct clk_psc_data *psc_data,
+			spinlock_t *lock)
+{
+	struct clk_init_data init;
+	struct clk_psc *psc;
+	struct clk *clk;
+
+	psc = kzalloc(sizeof(*psc), GFP_KERNEL);
+	if (!psc)
+		return ERR_PTR(-ENOMEM);
+
+	init.name = name;
+	init.ops = &clk_psc_ops;
+	init.parent_names = (parent_name ? &parent_name : NULL);
+	init.num_parents = (parent_name ? 1 : 0);
+
+	psc->psc_data = psc_data;
+	psc->lock = lock;
+	psc->hw.init = &init;
+
+	clk = clk_register(NULL, &psc->hw);
+	if (IS_ERR(clk))
+		kfree(psc);
+
+	return clk;
+}
+
+/**
+ * of_psc_clk_init - initialize psc clock through DT
+ * @node: device tree node for this clock
+ * @lock: spinlock used by this clock
+ */
+static void __init of_psc_clk_init(struct device_node *node, spinlock_t *lock)
+{
+	const char *clk_name = node->name;
+	const char *parent_name;
+	struct clk_psc_data *data;
+	struct clk *clk;
+	int i;
+
+	data = kzalloc(sizeof(*data), GFP_KERNEL);
+	if (!data) {
+		pr_err("%s: Out of memory\n", __func__);
+		return;
+	}
+
+	i = of_property_match_string(node, "reg-names", "control");
+	data->control_base = of_iomap(node, i);
+	if (!data->control_base) {
+		pr_err("%s: control ioremap failed\n", __func__);
+		goto out;
+	}
+
+	i = of_property_match_string(node, "reg-names", "domain");
+	data->domain_base = of_iomap(node, i);
+	if (!data->domain_base) {
+		pr_err("%s: domain ioremap failed\n", __func__);
+		iounmap(data->control_base);
+		goto out;
+	}
+
+	of_property_read_u32(node, "domain-id", &data->domain_id);
+
+	/* Domain transition registers at fixed address space of domain_id 0 */
+	if (!domain_transition_base && !data->domain_id)
+		domain_transition_base = data->domain_base;
+
+	of_property_read_string(node, "clock-output-names", &clk_name);
+	parent_name = of_clk_get_parent_name(node, 0);
+	if (!parent_name) {
+		pr_err("%s: Parent clock not found\n", __func__);
+		goto out;
+	}
+
+	clk = clk_register_psc(NULL, clk_name, parent_name, data, lock);
+	if (clk) {
+		of_clk_add_provider(node, of_clk_src_simple_get, clk);
+		return;
+	}
+
+	pr_err("%s: error registering clk %s\n", __func__, node->name);
+out:
+	kfree(data);
+	return;
+}
+
+/**
+ * of_keystone_psc_clk_init - initialize psc clock through DT
+ * @node: device tree node for this clock
+ */
+static void __init of_keystone_psc_clk_init(struct device_node *node)
+{
+	of_psc_clk_init(node, &psc_lock);
+}
+CLK_OF_DECLARE(keystone_gate_clk, "ti,keystone,psc-clock",
+					of_keystone_psc_clk_init);

drivers/clk/keystone/pll.c

@@ -0,0 +1,305 @@
+/*
+ * PLL clock driver for Keystone devices
+ *
+ * Copyright (C) 2013 Texas Instruments Inc.
+ *	Murali Karicheri <m-karicheri2@ti.com>
+ *	Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/of_address.h>
+#include <linux/of.h>
+#include <linux/module.h>
+
+#define PLLM_LOW_MASK		0x3f
+#define PLLM_HIGH_MASK		0x7ffc0
+#define MAIN_PLLM_HIGH_MASK	0x7f000
+#define PLLM_HIGH_SHIFT		6
+#define PLLD_MASK		0x3f
+
+/**
+ * struct clk_pll_data - pll data structure
+ * @has_pllctrl: If set to non zero, lower 6 bits of multiplier is in pllm
+ *	register of pll controller, else it is in the pll_ctrl0((bit 11-6)
+ * @phy_pllm: Physical address of PLLM in pll controller. Used when
+ *	has_pllctrl is non zero.
+ * @phy_pll_ctl0: Physical address of PLL ctrl0. This could be that of
+ *	Main PLL or any other PLLs in the device such as ARM PLL, DDR PLL
+ *	or PA PLL available on keystone2. These PLLs are controlled by
+ *	this register. Main PLL is controlled by a PLL controller.
+ * @pllm: PLL register map address
+ * @pll_ctl0: PLL controller map address
+ * @pllm_lower_mask: multiplier lower mask
+ * @pllm_upper_mask: multiplier upper mask
+ * @pllm_upper_shift: multiplier upper shift
+ * @plld_mask: divider mask
+ * @postdiv: Post divider
+ */
+struct clk_pll_data {
+	bool has_pllctrl;
+	u32 phy_pllm;
+	u32 phy_pll_ctl0;
+	void __iomem *pllm;
+	void __iomem *pll_ctl0;
+	u32 pllm_lower_mask;
+	u32 pllm_upper_mask;
+	u32 pllm_upper_shift;
+	u32 plld_mask;
+	u32 postdiv;
+};
+
+/**
+ * struct clk_pll - Main pll clock
+ * @hw: clk_hw for the pll
+ * @pll_data: PLL driver specific data
+ */
+struct clk_pll {
+	struct clk_hw hw;
+	struct clk_pll_data *pll_data;
+};
+
+#define to_clk_pll(_hw) container_of(_hw, struct clk_pll, hw)
+
+static unsigned long clk_pllclk_recalc(struct clk_hw *hw,
+					unsigned long parent_rate)
+{
+	struct clk_pll *pll = to_clk_pll(hw);
+	struct clk_pll_data *pll_data = pll->pll_data;
+	unsigned long rate = parent_rate;
+	u32  mult = 0, prediv, postdiv, val;
+
+	/*
+	 * get bits 0-5 of multiplier from pllctrl PLLM register
+	 * if has_pllctrl is non zero
+	 */
+	if (pll_data->has_pllctrl) {
+		val = readl(pll_data->pllm);
+		mult = (val & pll_data->pllm_lower_mask);
+	}
+
+	/* bit6-12 of PLLM is in Main PLL control register */
+	val = readl(pll_data->pll_ctl0);
+	mult |= ((val & pll_data->pllm_upper_mask)
+			>> pll_data->pllm_upper_shift);
+	prediv = (val & pll_data->plld_mask);
+	postdiv = pll_data->postdiv;
+
+	rate /= (prediv + 1);
+	rate = (rate * (mult + 1));
+	rate /= postdiv;
+
+	return rate;
+}
+
+static const struct clk_ops clk_pll_ops = {
+	.recalc_rate = clk_pllclk_recalc,
+};
+
+static struct clk *clk_register_pll(struct device *dev,
+			const char *name,
+			const char *parent_name,
+			struct clk_pll_data *pll_data)
+{
+	struct clk_init_data init;
+	struct clk_pll *pll;
+	struct clk *clk;
+
+	pll = kzalloc(sizeof(*pll), GFP_KERNEL);
+	if (!pll)
+		return ERR_PTR(-ENOMEM);
+
+	init.name = name;
+	init.ops = &clk_pll_ops;
+	init.flags = 0;
+	init.parent_names = (parent_name ? &parent_name : NULL);
+	init.num_parents = (parent_name ? 1 : 0);
+
+	pll->pll_data	= pll_data;
+	pll->hw.init = &init;
+
+	clk = clk_register(NULL, &pll->hw);
+	if (IS_ERR(clk))
+		goto out;
+
+	return clk;
+out:
+	kfree(pll);
+	return NULL;
+}
+
+/**
+ * _of_clk_init - PLL initialisation via DT
+ * @node: device tree node for this clock
+ * @pllctrl: If true, lower 6 bits of multiplier is in pllm register of
+ *		pll controller, else it is in the control regsiter0(bit 11-6)
+ */
+static void __init _of_pll_clk_init(struct device_node *node, bool pllctrl)
+{
+	struct clk_pll_data *pll_data;
+	const char *parent_name;
+	struct clk *clk;
+	int i;
+
+	pll_data = kzalloc(sizeof(*pll_data), GFP_KERNEL);
+	if (!pll_data) {
+		pr_err("%s: Out of memory\n", __func__);
+		return;
+	}
+
+	parent_name = of_clk_get_parent_name(node, 0);
+	if (of_property_read_u32(node, "fixed-postdiv",	&pll_data->postdiv))
+		goto out;
+
+	i = of_property_match_string(node, "reg-names", "control");
+	pll_data->pll_ctl0 = of_iomap(node, i);
+	if (!pll_data->pll_ctl0) {
+		pr_err("%s: ioremap failed\n", __func__);
+		goto out;
+	}
+
+	pll_data->pllm_lower_mask = PLLM_LOW_MASK;
+	pll_data->pllm_upper_shift = PLLM_HIGH_SHIFT;
+	pll_data->plld_mask = PLLD_MASK;
+	pll_data->has_pllctrl = pllctrl;
+	if (!pll_data->has_pllctrl) {
+		pll_data->pllm_upper_mask = PLLM_HIGH_MASK;
+	} else {
+		pll_data->pllm_upper_mask = MAIN_PLLM_HIGH_MASK;
+		i = of_property_match_string(node, "reg-names", "multiplier");
+		pll_data->pllm = of_iomap(node, i);
+		if (!pll_data->pllm) {
+			iounmap(pll_data->pll_ctl0);
+			goto out;
+		}
+	}
+
+	clk = clk_register_pll(NULL, node->name, parent_name, pll_data);
+	if (clk) {
+		of_clk_add_provider(node, of_clk_src_simple_get, clk);
+		return;
+	}
+
+out:
+	pr_err("%s: error initializing pll %s\n", __func__, node->name);
+	kfree(pll_data);
+}
+
+/**
+ * of_keystone_pll_clk_init - PLL initialisation DT wrapper
+ * @node: device tree node for this clock
+ */
+static void __init of_keystone_pll_clk_init(struct device_node *node)
+{
+	_of_pll_clk_init(node, false);
+}
+CLK_OF_DECLARE(keystone_pll_clock, "ti,keystone,pll-clock",
+					of_keystone_pll_clk_init);
+
+/**
+ * of_keystone_pll_main_clk_init - Main PLL initialisation DT wrapper
+ * @node: device tree node for this clock
+ */
+static void __init of_keystone_main_pll_clk_init(struct device_node *node)
+{
+	_of_pll_clk_init(node, true);
+}
+CLK_OF_DECLARE(keystone_main_pll_clock, "ti,keystone,main-pll-clock",
+						of_keystone_main_pll_clk_init);
+
+/**
+ * of_pll_div_clk_init - PLL divider setup function
+ * @node: device tree node for this clock
+ */
+static void __init of_pll_div_clk_init(struct device_node *node)
+{
+	const char *parent_name;
+	void __iomem *reg;
+	u32 shift, mask;
+	struct clk *clk;
+	const char *clk_name = node->name;
+
+	of_property_read_string(node, "clock-output-names", &clk_name);
+	reg = of_iomap(node, 0);
+	if (!reg) {
+		pr_err("%s: ioremap failed\n", __func__);
+		return;
+	}
+
+	parent_name = of_clk_get_parent_name(node, 0);
+	if (!parent_name) {
+		pr_err("%s: missing parent clock\n", __func__);
+		return;
+	}
+
+	if (of_property_read_u32(node, "bit-shift", &shift)) {
+		pr_err("%s: missing 'shift' property\n", __func__);
+		return;
+	}
+
+	if (of_property_read_u32(node, "bit-mask", &mask)) {
+		pr_err("%s: missing 'bit-mask' property\n", __func__);
+		return;
+	}
+
+	clk = clk_register_divider(NULL, clk_name, parent_name, 0, reg, shift,
+				 mask, 0, NULL);
+	if (clk)
+		of_clk_add_provider(node, of_clk_src_simple_get, clk);
+	else
+		pr_err("%s: error registering divider %s\n", __func__, clk_name);
+}
+CLK_OF_DECLARE(pll_divider_clock, "ti,keystone,pll-divider-clock", of_pll_div_clk_init);
+
+/**
+ * of_pll_mux_clk_init - PLL mux setup function
+ * @node: device tree node for this clock
+ */
+static void __init of_pll_mux_clk_init(struct device_node *node)
+{
+	void __iomem *reg;
+	u32 shift, mask;
+	struct clk *clk;
+	const char *parents[2];
+	const char *clk_name = node->name;
+
+	of_property_read_string(node, "clock-output-names", &clk_name);
+	reg = of_iomap(node, 0);
+	if (!reg) {
+		pr_err("%s: ioremap failed\n", __func__);
+		return;
+	}
+
+	parents[0] = of_clk_get_parent_name(node, 0);
+	parents[1] = of_clk_get_parent_name(node, 1);
+	if (!parents[0] || !parents[1]) {
+		pr_err("%s: missing parent clocks\n", __func__);
+		return;
+	}
+
+	if (of_property_read_u32(node, "bit-shift", &shift)) {
+		pr_err("%s: missing 'shift' property\n", __func__);
+		return;
+	}
+
+	if (of_property_read_u32(node, "bit-mask", &mask)) {
+		pr_err("%s: missing 'bit-mask' property\n", __func__);
+		return;
+	}
+
+	clk = clk_register_mux(NULL, clk_name, (const char **)&parents,
+				ARRAY_SIZE(parents) , 0, reg, shift, mask,
+				0, NULL);
+	if (clk)
+		of_clk_add_provider(node, of_clk_src_simple_get, clk);
+	else
+		pr_err("%s: error registering mux %s\n", __func__, clk_name);
+}
+CLK_OF_DECLARE(pll_mux_clock, "ti,keystone,pll-mux-clock", of_pll_mux_clk_init);

drivers/clk/zynq/clkc.c

@@ -117,13 +117,19 @@ static void __init zynq_clk_register_fclk(enum zynq_clk fclk,
 		goto err;
 	fclk_gate_lock = kmalloc(sizeof(*fclk_gate_lock), GFP_KERNEL);
 	if (!fclk_gate_lock)
-		goto err;
+		goto err_fclk_gate_lock;
 	spin_lock_init(fclk_lock);
 	spin_lock_init(fclk_gate_lock);
 
 	mux_name = kasprintf(GFP_KERNEL, "%s_mux", clk_name);
+	if (!mux_name)
+		goto err_mux_name;
 	div0_name = kasprintf(GFP_KERNEL, "%s_div0", clk_name);
+	if (!div0_name)
+		goto err_div0_name;
 	div1_name = kasprintf(GFP_KERNEL, "%s_div1", clk_name);
+	if (!div1_name)
+		goto err_div1_name;
 
 	clk = clk_register_mux(NULL, mux_name, parents, 4,
 			CLK_SET_RATE_NO_REPARENT, fclk_ctrl_reg, 4, 2, 0,
@@ -147,6 +153,14 @@ static void __init zynq_clk_register_fclk(enum zynq_clk fclk,
 
 	return;
 
+err_div1_name:
+	kfree(div0_name);
+err_div0_name:
+	kfree(mux_name);
+err_mux_name:
+	kfree(fclk_gate_lock);
+err_fclk_gate_lock:
+	kfree(fclk_lock);
 err:
 	clks[fclk] = ERR_PTR(-ENOMEM);
 }

include/dt-bindings/clock/efm32-cmu.h

@@ -0,0 +1,42 @@
+#ifndef __DT_BINDINGS_CLOCK_EFM32_CMU_H
+#define __DT_BINDINGS_CLOCK_EFM32_CMU_H
+
+#define clk_HFXO		0
+#define clk_HFRCO		1
+#define clk_LFXO		2
+#define clk_LFRCO		3
+#define clk_ULFRCO		4
+#define clk_AUXHFRCO		5
+#define clk_HFCLKNODIV		6
+#define clk_HFCLK		7
+#define clk_HFPERCLK		8
+#define clk_HFCORECLK		9
+#define clk_LFACLK		10
+#define clk_LFBCLK		11
+#define clk_WDOGCLK		12
+#define clk_HFCORECLKDMA	13
+#define clk_HFCORECLKAES	14
+#define clk_HFCORECLKUSBC	15
+#define clk_HFCORECLKUSB	16
+#define clk_HFCORECLKLE		17
+#define clk_HFCORECLKEBI	18
+#define clk_HFPERCLKUSART0	19
+#define clk_HFPERCLKUSART1	20
+#define clk_HFPERCLKUSART2	21
+#define clk_HFPERCLKUART0	22
+#define clk_HFPERCLKUART1	23
+#define clk_HFPERCLKTIMER0	24
+#define clk_HFPERCLKTIMER1	25
+#define clk_HFPERCLKTIMER2	26
+#define clk_HFPERCLKTIMER3	27
+#define clk_HFPERCLKACMP0	28
+#define clk_HFPERCLKACMP1	29
+#define clk_HFPERCLKI2C0	30
+#define clk_HFPERCLKI2C1	31
+#define clk_HFPERCLKGPIO	32
+#define clk_HFPERCLKVCMP	33
+#define clk_HFPERCLKPRS		34
+#define clk_HFPERCLKADC0	35
+#define clk_HFPERCLKDAC0	36
+
+#endif /* __DT_BINDINGS_CLOCK_EFM32_CMU_H */

include/linux/clk-provider.h

@@ -472,6 +472,7 @@ void of_clk_del_provider(struct device_node *np);
 struct clk *of_clk_src_simple_get(struct of_phandle_args *clkspec,
 				  void *data);
 struct clk *of_clk_src_onecell_get(struct of_phandle_args *clkspec, void *data);
+int of_clk_get_parent_count(struct device_node *np);
 const char *of_clk_get_parent_name(struct device_node *np, int index);
 
 void of_clk_init(const struct of_device_id *matches);