Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin: (62 commits)
  Blackfin: fix sparseirq/kstat_irqs fallout
  Blackfin: fix unused warnings after nommu update
  Blackfin: export the last exception cause via debugfs
  Blackfin: fix length checking in kgdb_ebin2mem
  Blackfin: kgdb: fix up error return values
  Blackfin: push access_ok() L1 attribute down
  Blackfin: punt duplicated search_exception_table() prototype
  Blackfin: add missing access_ok() checks to user functions
  Blackfin: convert early_printk EVT init to a loop
  Blackfin: document the lsl variants of the L1 allocator
  Blackfin: rename Blackfin relocs according to the toolchain
  Blackfin: check SIC defines rather than variant names
  Blackfin: add SSYNC to set_dma_sg() for descriptor fetching
  Blackfin: convert SMP to only use generic time framework
  Blackfin: bf548-ezkit/bf537-stamp: add resources for ADXL345/346
  Blackfin: override default uClinux MTD addr/size
  Blackfin: fix command line corruption with DEBUG_DOUBLEFAULT
  Blackfin: fix handling of initial L1 reservation
  Blackfin: merge sram init functions
  Blackfin: drop unused reserve_pda() function
  ...

arch/blackfin/Kconfig

@@ -223,6 +223,7 @@ endchoice
 
 config SMP
 	depends on BF561
+	select GENERIC_TIME
 	bool "Symmetric multi-processing support"
 	---help---
 	  This enables support for systems with more than one CPU,
@@ -241,12 +242,6 @@ config IRQ_PER_CPU
 	depends on SMP
 	default y
 
-config TICK_SOURCE_SYSTMR0
-	bool
-	select BFIN_GPTIMERS
-	depends on SMP
-	default y
-
 config BF_REV_MIN
 	int
 	default 0 if (BF51x || BF52x || (BF54x && !BF54xM))
@@ -263,8 +258,8 @@ config BF_REV_MAX
 
 choice
 	prompt "Silicon Rev"
-	default BF_REV_0_1 if (BF51x || BF52x || (BF54x && !BF54xM))
-	default BF_REV_0_2 if (BF534 || BF536 || BF537)
+	default BF_REV_0_0 if (BF51x || BF52x)
+	default BF_REV_0_2 if (BF534 || BF536 || BF537 || (BF54x && !BF54xM))
 	default BF_REV_0_3 if (BF531 || BF532 || BF533 || BF54xM || BF561)
 
 config BF_REV_0_0
@@ -607,7 +602,6 @@ source kernel/Kconfig.hz
 
 config GENERIC_TIME
 	bool "Generic time"
-	depends on !SMP
 	default y
 
 config GENERIC_CLOCKEVENTS
@@ -615,12 +609,26 @@ config GENERIC_CLOCKEVENTS
 	depends on GENERIC_TIME
 	default y
 
+choice
+	prompt "Kernel Tick Source"
+	depends on GENERIC_CLOCKEVENTS
+	default TICKSOURCE_CORETMR
+
+config TICKSOURCE_GPTMR0
+	bool "Gptimer0 (SCLK domain)"
+	select BFIN_GPTIMERS
+	depends on !IPIPE
+
+config TICKSOURCE_CORETMR
+	bool "Core timer (CCLK domain)"
+
+endchoice
+
 config CYCLES_CLOCKSOURCE
-	bool "Use 'CYCLES' as a clocksource (EXPERIMENTAL)"
-	depends on EXPERIMENTAL
+	bool "Use 'CYCLES' as a clocksource"
 	depends on GENERIC_CLOCKEVENTS
 	depends on !BFIN_SCRATCH_REG_CYCLES
-	default n
+	depends on !SMP
 	help
 	  If you say Y here, you will enable support for using the 'cycles'
 	  registers as a clock source.  Doing so means you will be unable to
@@ -628,6 +636,11 @@ config CYCLES_CLOCKSOURCE
 	  still be able to read it (such as for performance monitoring), but
 	  writing the registers will most likely crash the kernel.
 
+config GPTMR0_CLOCKSOURCE
+	bool "Use GPTimer0 as a clocksource (higher rating)"
+	depends on GENERIC_CLOCKEVENTS
+	depends on !TICKSOURCE_GPTMR0
+
 source kernel/time/Kconfig
 
 comment "Misc"
@@ -808,7 +821,7 @@ config APP_STACK_L1
 config EXCEPTION_L1_SCRATCH
 	bool "Locate exception stack in L1 Scratch Memory"
 	default n
-	depends on !APP_STACK_L1 && !SYSCALL_TAB_L1
+	depends on !APP_STACK_L1
 	help
 	  Whenever an exception occurs, use the L1 Scratch memory for
 	  stack storage.  You cannot place the stacks of FLAT binaries
@@ -901,7 +914,7 @@ config BFIN_ICACHE_LOCK
 	bool "Enable Instruction Cache Locking"
 
 choice
-	prompt "Policy"
+	prompt "External memory cache policy"
 	depends on BFIN_DCACHE
 	default BFIN_WB if !SMP
 	default BFIN_WT if SMP
@@ -942,12 +955,22 @@ config BFIN_WT
 
 endchoice
 
-config BFIN_L2_CACHEABLE
-	bool "Cache L2 SRAM"
-	depends on (BFIN_DCACHE || BFIN_ICACHE) && (BF54x || (BF561 && !SMP))
-	default n
-	help
-	  Select to make L2 SRAM cacheable in L1 data and instruction cache.
+choice
+	prompt "L2 SRAM cache policy"
+	depends on (BF54x || BF561)
+	default BFIN_L2_WT
+config BFIN_L2_WB
+	bool "Write back"
+	depends on !SMP
+
+config BFIN_L2_WT
+	bool "Write through"
+	depends on !SMP
+
+config BFIN_L2_NOT_CACHED
+	bool "Not cached"
+
+endchoice
 
 config MPU
 	bool "Enable the memory protection unit (EXPERIMENTAL)"
@@ -1011,21 +1034,34 @@ endmenu
 
 menu "EBIU_AMBCTL Control"
 config BANK_0
-	hex "Bank 0"
+	hex "Bank 0 (AMBCTL0.L)"
 	default 0x7BB0
+	help
+	  These are the low 16 bits of the EBIU_AMBCTL0 MMR which are
+	  used to control the Asynchronous Memory Bank 0 settings.
 
 config BANK_1
-	hex "Bank 1"
+	hex "Bank 1 (AMBCTL0.H)"
 	default 0x7BB0
 	default 0x5558 if BF54x
+	help
+	  These are the high 16 bits of the EBIU_AMBCTL0 MMR which are
+	  used to control the Asynchronous Memory Bank 1 settings.
 
 config BANK_2
-	hex "Bank 2"
+	hex "Bank 2 (AMBCTL1.L)"
 	default 0x7BB0
+	help
+	  These are the low 16 bits of the EBIU_AMBCTL1 MMR which are
+	  used to control the Asynchronous Memory Bank 2 settings.
 
 config BANK_3
-	hex "Bank 3"
+	hex "Bank 3 (AMBCTL1.H)"
 	default 0x99B3
+	help
+	  These are the high 16 bits of the EBIU_AMBCTL1 MMR which are
+	  used to control the Asynchronous Memory Bank 3 settings.
+
 endmenu
 
 config EBIU_MBSCTLVAL

arch/blackfin/Kconfig.debug

@@ -54,6 +54,19 @@ config DEBUG_HWERR
 	  hardware error interrupts and need to know where they are coming
 	  from.
 
+config EXACT_HWERR
+	bool "Try to make Hardware errors exact"
+	depends on DEBUG_HWERR
+	help
+	  By default, the Blackfin hardware errors are not exact - the error
+          be reported multiple cycles after the error happens. This delay
+	  can cause the wrong application, or even the kernel to receive a
+	  signal to be killed. If you are getting HW errors in your system,
+	  try turning this on to ensure they are at least comming from the
+	  proper thread.
+
+	  On production systems, it is safe (and a small optimization) to say N.
+
 config DEBUG_DOUBLEFAULT
 	bool "Debug Double Faults"
 	default n

arch/blackfin/configs/BF518F-EZBRD_defconfig

@@ -1,6 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28.7
+# Linux kernel version: 2.6.28.10
+# Thu May 21 05:50:01 2009
 #
 # CONFIG_MMU is not set
 # CONFIG_FPU is not set
@@ -42,10 +43,11 @@ CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-# CONFIG_SYSCTL is not set
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
+# CONFIG_SYSCTL_SYSCALL is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -53,16 +55,15 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 # CONFIG_ELF_CORE is not set
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 # CONFIG_FUTEX is not set
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
+# CONFIG_SIGNALFD is not set
+# CONFIG_TIMERFD is not set
+# CONFIG_EVENTFD is not set
 # CONFIG_AIO is not set
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
@@ -71,7 +72,6 @@ CONFIG_SLAB=y
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
 CONFIG_TINY_SHMEM=y
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
@@ -259,7 +259,10 @@ CONFIG_HZ=250
 # CONFIG_SCHED_HRTICK is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_TICKSOURCE_GPTMR0 is not set
+CONFIG_TICKSOURCE_CORETMR=y
 # CONFIG_CYCLES_CLOCKSOURCE is not set
+# CONFIG_GPTMR0_CLOCKSOURCE is not set
 # CONFIG_NO_HZ is not set
 # CONFIG_HIGH_RES_TIMERS is not set
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
@@ -404,7 +407,7 @@ CONFIG_IP_PNP=y
 # CONFIG_NET_IPIP is not set
 # CONFIG_NET_IPGRE is not set
 # CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
+# CONFIG_SYN_COOKIES is not set
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
@@ -688,14 +691,14 @@ CONFIG_INPUT_MISC=y
 # Character devices
 #
 # CONFIG_AD9960 is not set
-# CONFIG_SPI_ADC_BF533 is not set
-# CONFIG_BF5xx_PPIFCD is not set
+CONFIG_BFIN_DMA_INTERFACE=m
+# CONFIG_BFIN_PPI is not set
+# CONFIG_BFIN_PPIFCD is not set
 # CONFIG_BFIN_SIMPLE_TIMER is not set
-# CONFIG_BF5xx_PPI is not set
+# CONFIG_BFIN_SPI_ADC is not set
 # CONFIG_BFIN_SPORT is not set
 # CONFIG_BFIN_TIMER_LATENCY is not set
-# CONFIG_TWI_LCD is not set
-CONFIG_BFIN_DMA_INTERFACE=m
+# CONFIG_BFIN_TWI_LCD is not set
 CONFIG_SIMPLE_GPIO=m
 CONFIG_VT=y
 CONFIG_CONSOLE_TRANSLATIONS=y
@@ -802,7 +805,30 @@ CONFIG_SPI_BFIN=y
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
@@ -831,6 +857,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_REGULATOR is not set
@@ -962,7 +989,8 @@ CONFIG_RTC_DRV_BFIN=y
 #
 # File systems
 #
-# CONFIG_EXT2_FS is not set
+CONFIG_EXT2_FS=m
+# CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT3_FS is not set
 # CONFIG_EXT4_FS is not set
 # CONFIG_REISERFS_FS is not set
@@ -988,8 +1016,11 @@ CONFIG_INOTIFY_USER=y
 #
 # DOS/FAT/NT Filesystems
 #
+CONFIG_FAT_FS=m
 # CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 # CONFIG_NTFS_FS is not set
 
 #
@@ -1012,8 +1043,8 @@ CONFIG_SYSFS=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
-# CONFIG_YAFFS_FS is not set
 # CONFIG_JFFS2_FS is not set
+# CONFIG_YAFFS_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
@@ -1048,9 +1079,9 @@ CONFIG_SMB_FS=m
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
+CONFIG_NLS=m
 CONFIG_NLS_DEFAULT="iso8859-1"
-CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_437=m
 # CONFIG_NLS_CODEPAGE_737 is not set
 # CONFIG_NLS_CODEPAGE_775 is not set
 # CONFIG_NLS_CODEPAGE_850 is not set
@@ -1065,7 +1096,7 @@ CONFIG_NLS_CODEPAGE_437=y
 # CONFIG_NLS_CODEPAGE_865 is not set
 # CONFIG_NLS_CODEPAGE_866 is not set
 # CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
+CONFIG_NLS_CODEPAGE_936=m
 # CONFIG_NLS_CODEPAGE_950 is not set
 # CONFIG_NLS_CODEPAGE_932 is not set
 # CONFIG_NLS_CODEPAGE_949 is not set
@@ -1074,7 +1105,7 @@ CONFIG_NLS_CODEPAGE_437=y
 # CONFIG_NLS_CODEPAGE_1250 is not set
 # CONFIG_NLS_CODEPAGE_1251 is not set
 # CONFIG_NLS_ASCII is not set
-CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_1=m
 # CONFIG_NLS_ISO8859_2 is not set
 # CONFIG_NLS_ISO8859_3 is not set
 # CONFIG_NLS_ISO8859_4 is not set
@@ -1087,7 +1118,7 @@ CONFIG_NLS_ISO8859_1=y
 # CONFIG_NLS_ISO8859_15 is not set
 # CONFIG_NLS_KOI8_R is not set
 # CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
+CONFIG_NLS_UTF8=m
 # CONFIG_DLM is not set
 
 #
@@ -1102,7 +1133,7 @@ CONFIG_FRAME_WARN=1024
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DEBUG_SHIRQ=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
@@ -1111,8 +1142,6 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_TIMER_STATS is not set
 # CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
@@ -1132,7 +1161,6 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_FAULT_INJECTION is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 
 #
 # Tracers
@@ -1148,16 +1176,20 @@ CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_VERBOSE=y
 CONFIG_DEBUG_MMRS=y
-# CONFIG_DEBUG_HWERR is not set
-# CONFIG_DEBUG_DOUBLEFAULT is not set
+CONFIG_DEBUG_HWERR=y
+CONFIG_EXACT_HWERR=y
+CONFIG_DEBUG_DOUBLEFAULT=y
+CONFIG_DEBUG_DOUBLEFAULT_PRINT=y
+# CONFIG_DEBUG_DOUBLEFAULT_RESET is not set
+# CONFIG_DEBUG_ICACHE_CHECK is not set
 CONFIG_DEBUG_HUNT_FOR_ZERO=y
 CONFIG_DEBUG_BFIN_HWTRACE_ON=y
-CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y
-# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE is not set
+# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF is not set
+CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE=y
 # CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_TWO is not set
-CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0
+CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=1
 # CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set
-# CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set
+CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_CPLB_INFO=y
 CONFIG_ACCESS_CHECK=y
@@ -1269,7 +1301,6 @@ CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y

arch/blackfin/configs/BF526-EZBRD_defconfig

@@ -1,6 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28.7
+# Linux kernel version: 2.6.28.10
+# Thu May 21 05:50:01 2009
 #
 # CONFIG_MMU is not set
 # CONFIG_FPU is not set
@@ -42,10 +43,11 @@ CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-# CONFIG_SYSCTL is not set
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
+# CONFIG_SYSCTL_SYSCALL is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -53,16 +55,15 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 # CONFIG_ELF_CORE is not set
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 # CONFIG_FUTEX is not set
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
+# CONFIG_SIGNALFD is not set
+# CONFIG_TIMERFD is not set
+# CONFIG_EVENTFD is not set
 # CONFIG_AIO is not set
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
@@ -71,7 +72,6 @@ CONFIG_SLAB=y
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
 CONFIG_TINY_SHMEM=y
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
@@ -144,8 +144,8 @@ CONFIG_BF526=y
 # CONFIG_BF561 is not set
 CONFIG_BF_REV_MIN=0
 CONFIG_BF_REV_MAX=2
-# CONFIG_BF_REV_0_0 is not set
-CONFIG_BF_REV_0_1=y
+CONFIG_BF_REV_0_0=y
+# CONFIG_BF_REV_0_1 is not set
 # CONFIG_BF_REV_0_2 is not set
 # CONFIG_BF_REV_0_3 is not set
 # CONFIG_BF_REV_0_4 is not set
@@ -264,7 +264,10 @@ CONFIG_HZ=250
 # CONFIG_SCHED_HRTICK is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_TICKSOURCE_GPTMR0 is not set
+CONFIG_TICKSOURCE_CORETMR=y
 # CONFIG_CYCLES_CLOCKSOURCE is not set
+# CONFIG_GPTMR0_CLOCKSOURCE is not set
 # CONFIG_NO_HZ is not set
 # CONFIG_HIGH_RES_TIMERS is not set
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
@@ -409,7 +412,7 @@ CONFIG_IP_PNP=y
 # CONFIG_NET_IPIP is not set
 # CONFIG_NET_IPGRE is not set
 # CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
+# CONFIG_SYN_COOKIES is not set
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
@@ -491,7 +494,7 @@ CONFIG_MTD_PARTITIONS=y
 #
 # User Modules And Translation Layers
 #
-CONFIG_MTD_CHAR=m
+CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
 # CONFIG_FTL is not set
@@ -504,9 +507,9 @@ CONFIG_MTD_BLOCK=y
 #
 # RAM/ROM/Flash chip drivers
 #
-# CONFIG_MTD_CFI is not set
-CONFIG_MTD_JEDECPROBE=m
-CONFIG_MTD_GEN_PROBE=m
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
 # CONFIG_MTD_CFI_ADV_OPTIONS is not set
 CONFIG_MTD_MAP_BANK_WIDTH_1=y
 CONFIG_MTD_MAP_BANK_WIDTH_2=y
@@ -518,9 +521,10 @@ CONFIG_MTD_CFI_I1=y
 CONFIG_MTD_CFI_I2=y
 # CONFIG_MTD_CFI_I4 is not set
 # CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_INTELEXT=y
 # CONFIG_MTD_CFI_AMDSTD is not set
 # CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
 CONFIG_MTD_RAM=y
 CONFIG_MTD_ROM=m
 # CONFIG_MTD_ABSENT is not set
@@ -529,7 +533,8 @@ CONFIG_MTD_ROM=m
 # Mapping drivers for chip access
 #
 CONFIG_MTD_COMPLEX_MAPPINGS=y
-# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
 # CONFIG_MTD_GPIO_ADDR is not set
 # CONFIG_MTD_UCLINUX is not set
 # CONFIG_MTD_PLATRAM is not set
@@ -597,9 +602,42 @@ CONFIG_HAVE_IDE=y
 # SCSI device support
 #
 # CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
 # CONFIG_SCSI_NETLINK is not set
+# CONFIG_SCSI_PROC_FS is not set
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SR=m
+# CONFIG_BLK_DEV_SR_VENDOR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 CONFIG_NETDEVICES=y
@@ -644,9 +682,8 @@ CONFIG_BFIN_MAC_RMII=y
 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_AX88180 is not set
-CONFIG_NETDEV_10000=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
 
 #
 # Wireless LAN
@@ -715,14 +752,14 @@ CONFIG_INPUT_MISC=y
 # Character devices
 #
 # CONFIG_AD9960 is not set
-# CONFIG_SPI_ADC_BF533 is not set
-# CONFIG_BF5xx_PPIFCD is not set
+CONFIG_BFIN_DMA_INTERFACE=m
+# CONFIG_BFIN_PPI is not set
+# CONFIG_BFIN_PPIFCD is not set
 # CONFIG_BFIN_SIMPLE_TIMER is not set
-# CONFIG_BF5xx_PPI is not set
+# CONFIG_BFIN_SPI_ADC is not set
 # CONFIG_BFIN_SPORT is not set
 # CONFIG_BFIN_TIMER_LATENCY is not set
-# CONFIG_TWI_LCD is not set
-CONFIG_BFIN_DMA_INTERFACE=m
+# CONFIG_BFIN_TWI_LCD is not set
 CONFIG_SIMPLE_GPIO=m
 CONFIG_VT=y
 CONFIG_CONSOLE_TRANSLATIONS=y
@@ -832,11 +869,35 @@ CONFIG_SPI_BFIN=y
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD5252 is not set
 # CONFIG_SENSORS_AD7414 is not set
 # CONFIG_SENSORS_AD7418 is not set
 # CONFIG_SENSORS_ADCXX is not set
@@ -920,6 +981,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_REGULATOR is not set
@@ -1008,8 +1070,8 @@ CONFIG_USB=y
 #
 # Miscellaneous USB options
 #
-# CONFIG_USB_DEVICEFS is not set
-CONFIG_USB_DEVICE_CLASS=y
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_OTG is not set
 # CONFIG_USB_OTG_WHITELIST is not set
@@ -1037,10 +1099,10 @@ CONFIG_USB_MUSB_SOC=y
 CONFIG_USB_MUSB_HOST=y
 # CONFIG_USB_MUSB_PERIPHERAL is not set
 # CONFIG_USB_MUSB_OTG is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
 CONFIG_USB_MUSB_HDRC_HCD=y
-CONFIG_MUSB_PIO_ONLY=y
-CONFIG_MUSB_DMA_POLL=y
+# CONFIG_MUSB_PIO_ONLY is not set
+CONFIG_USB_INVENTRA_DMA=y
+# CONFIG_USB_TI_CPPI_DMA is not set
 # CONFIG_USB_MUSB_DEBUG is not set
 
 #
@@ -1058,7 +1120,7 @@ CONFIG_MUSB_DMA_POLL=y
 #
 # see USB_STORAGE Help for more information
 #
-CONFIG_USB_STORAGE=m
+CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
 # CONFIG_USB_STORAGE_DATAFAB is not set
 # CONFIG_USB_STORAGE_FREECOM is not set
@@ -1107,33 +1169,10 @@ CONFIG_USB_STORAGE=m
 # CONFIG_USB_LD is not set
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
 # CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_NET2272 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_ZERO is not set
-# CONFIG_USB_AUDIO is not set
-# CONFIG_USB_ETH is not set
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
-# CONFIG_USB_CDC_COMPOSITE is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
@@ -1206,7 +1245,8 @@ CONFIG_RTC_DRV_BFIN=y
 #
 # File systems
 #
-# CONFIG_EXT2_FS is not set
+CONFIG_EXT2_FS=m
+# CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT3_FS is not set
 # CONFIG_EXT4_FS is not set
 # CONFIG_REISERFS_FS is not set
@@ -1226,14 +1266,19 @@ CONFIG_INOTIFY_USER=y
 #
 # CD-ROM/DVD Filesystems
 #
-# CONFIG_ISO9660_FS is not set
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+# CONFIG_ZISOFS is not set
 # CONFIG_UDF_FS is not set
 
 #
 # DOS/FAT/NT Filesystems
 #
+CONFIG_FAT_FS=m
 # CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 # CONFIG_NTFS_FS is not set
 
 #
@@ -1256,16 +1301,6 @@ CONFIG_SYSFS=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
-CONFIG_YAFFS_FS=m
-CONFIG_YAFFS_YAFFS1=y
-# CONFIG_YAFFS_9BYTE_TAGS is not set
-# CONFIG_YAFFS_DOES_ECC is not set
-CONFIG_YAFFS_YAFFS2=y
-CONFIG_YAFFS_AUTO_YAFFS2=y
-# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set
-# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set
-# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set
-CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
 CONFIG_JFFS2_FS=m
 CONFIG_JFFS2_FS_DEBUG=0
 CONFIG_JFFS2_FS_WRITEBUFFER=y
@@ -1277,6 +1312,16 @@ CONFIG_JFFS2_ZLIB=y
 # CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
+CONFIG_YAFFS_FS=m
+CONFIG_YAFFS_YAFFS1=y
+# CONFIG_YAFFS_9BYTE_TAGS is not set
+# CONFIG_YAFFS_DOES_ECC is not set
+CONFIG_YAFFS_YAFFS2=y
+CONFIG_YAFFS_AUTO_YAFFS2=y
+# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set
+# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set
+# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set
+CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
@@ -1313,7 +1358,7 @@ CONFIG_SMB_FS=m
 CONFIG_MSDOS_PARTITION=y
 CONFIG_NLS=m
 CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
+CONFIG_NLS_CODEPAGE_437=m
 # CONFIG_NLS_CODEPAGE_737 is not set
 # CONFIG_NLS_CODEPAGE_775 is not set
 # CONFIG_NLS_CODEPAGE_850 is not set
@@ -1328,7 +1373,7 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_CODEPAGE_865 is not set
 # CONFIG_NLS_CODEPAGE_866 is not set
 # CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
+CONFIG_NLS_CODEPAGE_936=m
 # CONFIG_NLS_CODEPAGE_950 is not set
 # CONFIG_NLS_CODEPAGE_932 is not set
 # CONFIG_NLS_CODEPAGE_949 is not set
@@ -1337,7 +1382,7 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_CODEPAGE_1250 is not set
 # CONFIG_NLS_CODEPAGE_1251 is not set
 # CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
+CONFIG_NLS_ISO8859_1=m
 # CONFIG_NLS_ISO8859_2 is not set
 # CONFIG_NLS_ISO8859_3 is not set
 # CONFIG_NLS_ISO8859_4 is not set
@@ -1350,7 +1395,7 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_ISO8859_15 is not set
 # CONFIG_NLS_KOI8_R is not set
 # CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
+CONFIG_NLS_UTF8=m
 # CONFIG_DLM is not set
 
 #
@@ -1365,7 +1410,7 @@ CONFIG_FRAME_WARN=1024
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DEBUG_SHIRQ=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
@@ -1374,8 +1419,6 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_TIMER_STATS is not set
 # CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
@@ -1395,7 +1438,6 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_FAULT_INJECTION is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 
 #
 # Tracers
@@ -1411,16 +1453,20 @@ CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_VERBOSE=y
 CONFIG_DEBUG_MMRS=y
-# CONFIG_DEBUG_HWERR is not set
-# CONFIG_DEBUG_DOUBLEFAULT is not set
+CONFIG_DEBUG_HWERR=y
+CONFIG_EXACT_HWERR=y
+CONFIG_DEBUG_DOUBLEFAULT=y
+CONFIG_DEBUG_DOUBLEFAULT_PRINT=y
+# CONFIG_DEBUG_DOUBLEFAULT_RESET is not set
+# CONFIG_DEBUG_ICACHE_CHECK is not set
 CONFIG_DEBUG_HUNT_FOR_ZERO=y
 CONFIG_DEBUG_BFIN_HWTRACE_ON=y
-CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y
-# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE is not set
+# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF is not set
+CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE=y
 # CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_TWO is not set
-CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0
+CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=1
 # CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set
-# CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set
+CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_CPLB_INFO=y
 CONFIG_ACCESS_CHECK=y
@@ -1534,7 +1580,6 @@ CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=m
-CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y

arch/blackfin/configs/BF527-EZKIT_defconfig

@@ -1,6 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28.7
+# Linux kernel version: 2.6.28.10
+# Thu May 21 05:50:01 2009
 #
 # CONFIG_MMU is not set
 # CONFIG_FPU is not set
@@ -42,10 +43,11 @@ CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-# CONFIG_SYSCTL is not set
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
+# CONFIG_SYSCTL_SYSCALL is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -53,16 +55,15 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 # CONFIG_ELF_CORE is not set
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 # CONFIG_FUTEX is not set
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
+# CONFIG_SIGNALFD is not set
+# CONFIG_TIMERFD is not set
+# CONFIG_EVENTFD is not set
 # CONFIG_AIO is not set
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
@@ -71,7 +72,6 @@ CONFIG_SLAB=y
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
 CONFIG_TINY_SHMEM=y
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
@@ -145,8 +145,8 @@ CONFIG_BF527=y
 CONFIG_BF_REV_MIN=0
 CONFIG_BF_REV_MAX=2
 # CONFIG_BF_REV_0_0 is not set
-CONFIG_BF_REV_0_1=y
-# CONFIG_BF_REV_0_2 is not set
+# CONFIG_BF_REV_0_1 is not set
+CONFIG_BF_REV_0_2=y
 # CONFIG_BF_REV_0_3 is not set
 # CONFIG_BF_REV_0_4 is not set
 # CONFIG_BF_REV_0_5 is not set
@@ -264,7 +264,10 @@ CONFIG_HZ=250
 # CONFIG_SCHED_HRTICK is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_TICKSOURCE_GPTMR0 is not set
+CONFIG_TICKSOURCE_CORETMR=y
 # CONFIG_CYCLES_CLOCKSOURCE is not set
+# CONFIG_GPTMR0_CLOCKSOURCE is not set
 # CONFIG_NO_HZ is not set
 # CONFIG_HIGH_RES_TIMERS is not set
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
@@ -318,7 +321,7 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_VIRT_TO_BUS=y
-CONFIG_BFIN_GPTIMERS=m
+CONFIG_BFIN_GPTIMERS=y
 # CONFIG_DMA_UNCACHED_4M is not set
 # CONFIG_DMA_UNCACHED_2M is not set
 CONFIG_DMA_UNCACHED_1M=y
@@ -409,7 +412,7 @@ CONFIG_IP_PNP=y
 # CONFIG_NET_IPIP is not set
 # CONFIG_NET_IPGRE is not set
 # CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
+# CONFIG_SYN_COOKIES is not set
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
@@ -639,9 +642,42 @@ CONFIG_HAVE_IDE=y
 # SCSI device support
 #
 # CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
 # CONFIG_SCSI_NETLINK is not set
+# CONFIG_SCSI_PROC_FS is not set
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SR=m
+# CONFIG_BLK_DEV_SR_VENDOR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 CONFIG_NETDEVICES=y
@@ -687,9 +723,8 @@ CONFIG_BFIN_MAC_RMII=y
 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_AX88180 is not set
-CONFIG_NETDEV_10000=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
 
 #
 # Wireless LAN
@@ -758,14 +793,14 @@ CONFIG_INPUT_MISC=y
 # Character devices
 #
 # CONFIG_AD9960 is not set
-# CONFIG_SPI_ADC_BF533 is not set
-# CONFIG_BF5xx_PPIFCD is not set
+CONFIG_BFIN_DMA_INTERFACE=m
+# CONFIG_BFIN_PPI is not set
+# CONFIG_BFIN_PPIFCD is not set
 # CONFIG_BFIN_SIMPLE_TIMER is not set
-CONFIG_BF5xx_PPI=m
+# CONFIG_BFIN_SPI_ADC is not set
 CONFIG_BFIN_SPORT=m
 # CONFIG_BFIN_TIMER_LATENCY is not set
-# CONFIG_TWI_LCD is not set
-CONFIG_BFIN_DMA_INTERFACE=m
+# CONFIG_BFIN_TWI_LCD is not set
 CONFIG_SIMPLE_GPIO=m
 CONFIG_VT=y
 CONFIG_CONSOLE_TRANSLATIONS=y
@@ -875,7 +910,30 @@ CONFIG_SPI_BFIN=y
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
@@ -909,6 +967,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_REGULATOR is not set
@@ -1091,8 +1150,8 @@ CONFIG_USB=y
 #
 # Miscellaneous USB options
 #
-# CONFIG_USB_DEVICEFS is not set
-CONFIG_USB_DEVICE_CLASS=y
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_OTG is not set
 # CONFIG_USB_OTG_WHITELIST is not set
@@ -1120,10 +1179,10 @@ CONFIG_USB_MUSB_SOC=y
 CONFIG_USB_MUSB_HOST=y
 # CONFIG_USB_MUSB_PERIPHERAL is not set
 # CONFIG_USB_MUSB_OTG is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
 CONFIG_USB_MUSB_HDRC_HCD=y
-CONFIG_MUSB_PIO_ONLY=y
-CONFIG_MUSB_DMA_POLL=y
+# CONFIG_MUSB_PIO_ONLY is not set
+CONFIG_USB_INVENTRA_DMA=y
+# CONFIG_USB_TI_CPPI_DMA is not set
 # CONFIG_USB_MUSB_DEBUG is not set
 
 #
@@ -1141,7 +1200,7 @@ CONFIG_MUSB_DMA_POLL=y
 #
 # see USB_STORAGE Help for more information
 #
-CONFIG_USB_STORAGE=m
+CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
 # CONFIG_USB_STORAGE_DATAFAB is not set
 # CONFIG_USB_STORAGE_FREECOM is not set
@@ -1190,33 +1249,10 @@ CONFIG_USB_STORAGE=m
 # CONFIG_USB_LD is not set
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
 # CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_NET2272 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_ZERO is not set
-# CONFIG_USB_AUDIO is not set
-# CONFIG_USB_ETH is not set
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
-# CONFIG_USB_CDC_COMPOSITE is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
@@ -1289,7 +1325,8 @@ CONFIG_RTC_DRV_BFIN=y
 #
 # File systems
 #
-# CONFIG_EXT2_FS is not set
+CONFIG_EXT2_FS=m
+# CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT3_FS is not set
 # CONFIG_EXT4_FS is not set
 # CONFIG_REISERFS_FS is not set
@@ -1309,14 +1346,20 @@ CONFIG_INOTIFY_USER=y
 #
 # CD-ROM/DVD Filesystems
 #
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+# CONFIG_ZISOFS is not set
+CONFIG_UDF_FS=m
+CONFIG_UDF_NLS=y
 
 #
 # DOS/FAT/NT Filesystems
 #
+CONFIG_FAT_FS=m
 # CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 # CONFIG_NTFS_FS is not set
 
 #
@@ -1339,16 +1382,6 @@ CONFIG_SYSFS=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
-CONFIG_YAFFS_FS=m
-CONFIG_YAFFS_YAFFS1=y
-# CONFIG_YAFFS_9BYTE_TAGS is not set
-# CONFIG_YAFFS_DOES_ECC is not set
-CONFIG_YAFFS_YAFFS2=y
-CONFIG_YAFFS_AUTO_YAFFS2=y
-# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set
-# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set
-# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set
-CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
 CONFIG_JFFS2_FS=m
 CONFIG_JFFS2_FS_DEBUG=0
 CONFIG_JFFS2_FS_WRITEBUFFER=y
@@ -1360,6 +1393,16 @@ CONFIG_JFFS2_ZLIB=y
 # CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
+CONFIG_YAFFS_FS=m
+CONFIG_YAFFS_YAFFS1=y
+# CONFIG_YAFFS_9BYTE_TAGS is not set
+# CONFIG_YAFFS_DOES_ECC is not set
+CONFIG_YAFFS_YAFFS2=y
+CONFIG_YAFFS_AUTO_YAFFS2=y
+# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set
+# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set
+# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set
+CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
@@ -1396,7 +1439,7 @@ CONFIG_SMB_FS=m
 CONFIG_MSDOS_PARTITION=y
 CONFIG_NLS=m
 CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
+CONFIG_NLS_CODEPAGE_437=m
 # CONFIG_NLS_CODEPAGE_737 is not set
 # CONFIG_NLS_CODEPAGE_775 is not set
 # CONFIG_NLS_CODEPAGE_850 is not set
@@ -1411,7 +1454,7 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_CODEPAGE_865 is not set
 # CONFIG_NLS_CODEPAGE_866 is not set
 # CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
+CONFIG_NLS_CODEPAGE_936=m
 # CONFIG_NLS_CODEPAGE_950 is not set
 # CONFIG_NLS_CODEPAGE_932 is not set
 # CONFIG_NLS_CODEPAGE_949 is not set
@@ -1420,7 +1463,7 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_CODEPAGE_1250 is not set
 # CONFIG_NLS_CODEPAGE_1251 is not set
 # CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
+CONFIG_NLS_ISO8859_1=m
 # CONFIG_NLS_ISO8859_2 is not set
 # CONFIG_NLS_ISO8859_3 is not set
 # CONFIG_NLS_ISO8859_4 is not set
@@ -1433,7 +1476,7 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_ISO8859_15 is not set
 # CONFIG_NLS_KOI8_R is not set
 # CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
+CONFIG_NLS_UTF8=m
 # CONFIG_DLM is not set
 
 #
@@ -1448,7 +1491,7 @@ CONFIG_FRAME_WARN=1024
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DEBUG_SHIRQ=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
@@ -1457,8 +1500,6 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_TIMER_STATS is not set
 # CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
@@ -1478,7 +1519,6 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_FAULT_INJECTION is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
 
 #
 # Tracers
@@ -1494,16 +1534,20 @@ CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_VERBOSE=y
 CONFIG_DEBUG_MMRS=y
-# CONFIG_DEBUG_HWERR is not set
-# CONFIG_DEBUG_DOUBLEFAULT is not set
+CONFIG_DEBUG_HWERR=y
+CONFIG_EXACT_HWERR=y
+CONFIG_DEBUG_DOUBLEFAULT=y
+CONFIG_DEBUG_DOUBLEFAULT_PRINT=y
+# CONFIG_DEBUG_DOUBLEFAULT_RESET is not set
+# CONFIG_DEBUG_ICACHE_CHECK is not set
 CONFIG_DEBUG_HUNT_FOR_ZERO=y
 CONFIG_DEBUG_BFIN_HWTRACE_ON=y
-CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y
-# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE is not set
+# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF is not set
+CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE=y
 # CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_TWO is not set
-CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0
+CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=1
 # CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set
-# CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set
+CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_CPLB_INFO=y
 CONFIG_ACCESS_CHECK=y
@@ -1611,13 +1655,12 @@ CONFIG_BITREVERSE=y
 CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=m
-CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y

arch/blackfin/configs/BF533-EZKIT_defconfig

@@ -1,6 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28.7
+# Linux kernel version: 2.6.28.10
+# Thu May 21 05:50:01 2009
 #
 # CONFIG_MMU is not set
 # CONFIG_FPU is not set
@@ -42,10 +43,11 @@ CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-# CONFIG_SYSCTL is not set
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
+# CONFIG_SYSCTL_SYSCALL is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -53,16 +55,15 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 # CONFIG_ELF_CORE is not set
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 # CONFIG_FUTEX is not set
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
+# CONFIG_SIGNALFD is not set
+# CONFIG_TIMERFD is not set
+# CONFIG_EVENTFD is not set
 # CONFIG_AIO is not set
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
@@ -71,7 +72,6 @@ CONFIG_SLAB=y
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
 CONFIG_TINY_SHMEM=y
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
@@ -225,7 +225,10 @@ CONFIG_HZ=250
 CONFIG_SCHED_HRTICK=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_TICKSOURCE_GPTMR0 is not set
+CONFIG_TICKSOURCE_CORETMR=y
 # CONFIG_CYCLES_CLOCKSOURCE is not set
+# CONFIG_GPTMR0_CLOCKSOURCE is not set
 CONFIG_TICK_ONESHOT=y
 # CONFIG_NO_HZ is not set
 CONFIG_HIGH_RES_TIMERS=y
@@ -382,7 +385,7 @@ CONFIG_IP_PNP=y
 # CONFIG_NET_IPIP is not set
 # CONFIG_NET_IPGRE is not set
 # CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
+# CONFIG_SYN_COOKIES is not set
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
@@ -613,9 +616,8 @@ CONFIG_SMC91X=y
 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_AX88180 is not set
-CONFIG_NETDEV_10000=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
 
 #
 # Wireless LAN
@@ -667,13 +669,13 @@ CONFIG_INPUT_EVDEV=m
 # Character devices
 #
 # CONFIG_AD9960 is not set
-# CONFIG_SPI_ADC_BF533 is not set
-# CONFIG_BF5xx_PPIFCD is not set
+CONFIG_BFIN_DMA_INTERFACE=m
+# CONFIG_BFIN_PPI is not set
+# CONFIG_BFIN_PPIFCD is not set
 # CONFIG_BFIN_SIMPLE_TIMER is not set
-# CONFIG_BF5xx_PPI is not set
+# CONFIG_BFIN_SPI_ADC is not set
 CONFIG_BFIN_SPORT=y
 # CONFIG_BFIN_TIMER_LATENCY is not set
-CONFIG_BFIN_DMA_INTERFACE=m
 CONFIG_SIMPLE_GPIO=m
 # CONFIG_VT is not set
 # CONFIG_DEVKMEM is not set
@@ -729,7 +731,30 @@ CONFIG_SPI_BFIN=y
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
@@ -904,16 +929,6 @@ CONFIG_SYSFS=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
-CONFIG_YAFFS_FS=m
-CONFIG_YAFFS_YAFFS1=y
-# CONFIG_YAFFS_9BYTE_TAGS is not set
-# CONFIG_YAFFS_DOES_ECC is not set
-CONFIG_YAFFS_YAFFS2=y
-CONFIG_YAFFS_AUTO_YAFFS2=y
-# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set
-# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set
-# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set
-CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
 CONFIG_JFFS2_FS=m
 CONFIG_JFFS2_FS_DEBUG=0
 CONFIG_JFFS2_FS_WRITEBUFFER=y
@@ -925,6 +940,16 @@ CONFIG_JFFS2_ZLIB=y
 # CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
+CONFIG_YAFFS_FS=m
+CONFIG_YAFFS_YAFFS1=y
+# CONFIG_YAFFS_9BYTE_TAGS is not set
+# CONFIG_YAFFS_DOES_ECC is not set
+CONFIG_YAFFS_YAFFS2=y
+CONFIG_YAFFS_AUTO_YAFFS2=y
+# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set
+# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set
+# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set
+CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
@@ -1013,7 +1038,7 @@ CONFIG_FRAME_WARN=1024
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DEBUG_SHIRQ=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
@@ -1022,8 +1047,6 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_TIMER_STATS is not set
 # CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
@@ -1043,7 +1066,6 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_FAULT_INJECTION is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
 
 #
 # Tracers
@@ -1059,16 +1081,20 @@ CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_VERBOSE=y
 CONFIG_DEBUG_MMRS=y
-# CONFIG_DEBUG_HWERR is not set
-# CONFIG_DEBUG_DOUBLEFAULT is not set
+CONFIG_DEBUG_HWERR=y
+CONFIG_EXACT_HWERR=y
+CONFIG_DEBUG_DOUBLEFAULT=y
+CONFIG_DEBUG_DOUBLEFAULT_PRINT=y
+# CONFIG_DEBUG_DOUBLEFAULT_RESET is not set
+# CONFIG_DEBUG_ICACHE_CHECK is not set
 CONFIG_DEBUG_HUNT_FOR_ZERO=y
 CONFIG_DEBUG_BFIN_HWTRACE_ON=y
-CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y
-# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE is not set
+# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF is not set
+CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE=y
 # CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_TWO is not set
-CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0
+CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=1
 # CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set
-# CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set
+CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_CPLB_INFO=y
 CONFIG_ACCESS_CHECK=y
@@ -1181,7 +1207,6 @@ CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=m
-CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y

arch/blackfin/configs/BF533-STAMP_defconfig

@@ -1,6 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28.7
+# Linux kernel version: 2.6.28.10
+# Thu May 21 05:50:01 2009
 #
 # CONFIG_MMU is not set
 # CONFIG_FPU is not set
@@ -42,10 +43,11 @@ CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-# CONFIG_SYSCTL is not set
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
+# CONFIG_SYSCTL_SYSCALL is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -53,16 +55,15 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 # CONFIG_ELF_CORE is not set
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 # CONFIG_FUTEX is not set
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
+# CONFIG_SIGNALFD is not set
+# CONFIG_TIMERFD is not set
+# CONFIG_EVENTFD is not set
 # CONFIG_AIO is not set
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
@@ -71,7 +72,6 @@ CONFIG_SLAB=y
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
 CONFIG_TINY_SHMEM=y
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
@@ -225,7 +225,10 @@ CONFIG_HZ=250
 CONFIG_SCHED_HRTICK=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_TICKSOURCE_GPTMR0 is not set
+CONFIG_TICKSOURCE_CORETMR=y
 # CONFIG_CYCLES_CLOCKSOURCE is not set
+# CONFIG_GPTMR0_CLOCKSOURCE is not set
 CONFIG_TICK_ONESHOT=y
 # CONFIG_NO_HZ is not set
 CONFIG_HIGH_RES_TIMERS=y
@@ -382,7 +385,7 @@ CONFIG_IP_PNP=y
 # CONFIG_NET_IPIP is not set
 # CONFIG_NET_IPGRE is not set
 # CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
+# CONFIG_SYN_COOKIES is not set
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
@@ -618,9 +621,8 @@ CONFIG_SMC91X=y
 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_AX88180 is not set
-CONFIG_NETDEV_10000=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
 
 #
 # Wireless LAN
@@ -674,14 +676,14 @@ CONFIG_CONFIG_INPUT_PCF8574=m
 # Character devices
 #
 # CONFIG_AD9960 is not set
-# CONFIG_SPI_ADC_BF533 is not set
-# CONFIG_BF5xx_PPIFCD is not set
+CONFIG_BFIN_DMA_INTERFACE=m
+# CONFIG_BFIN_PPI is not set
+# CONFIG_BFIN_PPIFCD is not set
 # CONFIG_BFIN_SIMPLE_TIMER is not set
-CONFIG_BF5xx_PPI=m
+# CONFIG_BFIN_SPI_ADC is not set
 CONFIG_BFIN_SPORT=m
 # CONFIG_BFIN_TIMER_LATENCY is not set
-# CONFIG_TWI_LCD is not set
-CONFIG_BFIN_DMA_INTERFACE=m
+# CONFIG_BFIN_TWI_LCD is not set
 CONFIG_SIMPLE_GPIO=m
 # CONFIG_VT is not set
 # CONFIG_DEVKMEM is not set
@@ -781,7 +783,30 @@ CONFIG_SPI_BFIN=y
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
@@ -1068,16 +1093,6 @@ CONFIG_SYSFS=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
-CONFIG_YAFFS_FS=m
-CONFIG_YAFFS_YAFFS1=y
-# CONFIG_YAFFS_9BYTE_TAGS is not set
-# CONFIG_YAFFS_DOES_ECC is not set
-CONFIG_YAFFS_YAFFS2=y
-CONFIG_YAFFS_AUTO_YAFFS2=y
-# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set
-# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set
-# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set
-CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
 CONFIG_JFFS2_FS=m
 CONFIG_JFFS2_FS_DEBUG=0
 CONFIG_JFFS2_FS_WRITEBUFFER=y
@@ -1089,6 +1104,16 @@ CONFIG_JFFS2_ZLIB=y
 # CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
+CONFIG_YAFFS_FS=m
+CONFIG_YAFFS_YAFFS1=y
+# CONFIG_YAFFS_9BYTE_TAGS is not set
+# CONFIG_YAFFS_DOES_ECC is not set
+CONFIG_YAFFS_YAFFS2=y
+CONFIG_YAFFS_AUTO_YAFFS2=y
+# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set
+# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set
+# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set
+CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
@@ -1177,7 +1202,7 @@ CONFIG_FRAME_WARN=1024
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DEBUG_SHIRQ=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
@@ -1186,8 +1211,6 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_TIMER_STATS is not set
 # CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
@@ -1207,7 +1230,6 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_FAULT_INJECTION is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
 
 #
 # Tracers
@@ -1223,16 +1245,20 @@ CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_VERBOSE=y
 CONFIG_DEBUG_MMRS=y
-# CONFIG_DEBUG_HWERR is not set
-# CONFIG_DEBUG_DOUBLEFAULT is not set
+CONFIG_DEBUG_HWERR=y
+CONFIG_EXACT_HWERR=y
+CONFIG_DEBUG_DOUBLEFAULT=y
+CONFIG_DEBUG_DOUBLEFAULT_PRINT=y
+# CONFIG_DEBUG_DOUBLEFAULT_RESET is not set
+# CONFIG_DEBUG_ICACHE_CHECK is not set
 CONFIG_DEBUG_HUNT_FOR_ZERO=y
 CONFIG_DEBUG_BFIN_HWTRACE_ON=y
-CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y
-# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE is not set
+# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF is not set
+CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE=y
 # CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_TWO is not set
-CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0
+CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=1
 # CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set
-# CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set
+CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_CPLB_INFO=y
 CONFIG_ACCESS_CHECK=y
@@ -1345,7 +1371,6 @@ CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=m
-CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y

arch/blackfin/configs/BF537-STAMP_defconfig

@@ -1,6 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28.7
+# Linux kernel version: 2.6.28.10
+# Thu May 21 05:50:01 2009
 #
 # CONFIG_MMU is not set
 # CONFIG_FPU is not set
@@ -42,10 +43,11 @@ CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-# CONFIG_SYSCTL is not set
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
+# CONFIG_SYSCTL_SYSCALL is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -53,16 +55,15 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 # CONFIG_ELF_CORE is not set
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 # CONFIG_FUTEX is not set
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
+# CONFIG_SIGNALFD is not set
+# CONFIG_TIMERFD is not set
+# CONFIG_EVENTFD is not set
 # CONFIG_AIO is not set
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
@@ -71,7 +72,6 @@ CONFIG_SLAB=y
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
 CONFIG_TINY_SHMEM=y
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
@@ -232,7 +232,10 @@ CONFIG_HZ=250
 CONFIG_SCHED_HRTICK=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_TICKSOURCE_GPTMR0 is not set
+CONFIG_TICKSOURCE_CORETMR=y
 # CONFIG_CYCLES_CLOCKSOURCE is not set
+# CONFIG_GPTMR0_CLOCKSOURCE is not set
 CONFIG_TICK_ONESHOT=y
 # CONFIG_NO_HZ is not set
 CONFIG_HIGH_RES_TIMERS=y
@@ -390,7 +393,7 @@ CONFIG_IP_PNP=y
 # CONFIG_NET_IPIP is not set
 # CONFIG_NET_IPGRE is not set
 # CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
+# CONFIG_SYN_COOKIES is not set
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
@@ -548,9 +551,7 @@ CONFIG_MTD_ROM=m
 #
 # CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=m
-CONFIG_MTD_PHYSMAP_START=0x20000000
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
 # CONFIG_MTD_UCLINUX is not set
 # CONFIG_MTD_PLATRAM is not set
 
@@ -649,9 +650,8 @@ CONFIG_BFIN_RX_DESC_NUM=20
 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_AX88180 is not set
-CONFIG_NETDEV_10000=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
 
 #
 # Wireless LAN
@@ -708,14 +708,14 @@ CONFIG_SERIO_LIBPS2=y
 # Character devices
 #
 # CONFIG_AD9960 is not set
-# CONFIG_SPI_ADC_BF533 is not set
-# CONFIG_BF5xx_PPIFCD is not set
+CONFIG_BFIN_DMA_INTERFACE=m
+# CONFIG_BFIN_PPI is not set
+# CONFIG_BFIN_PPIFCD is not set
 # CONFIG_BFIN_SIMPLE_TIMER is not set
-CONFIG_BF5xx_PPI=m
+# CONFIG_BFIN_SPI_ADC is not set
 CONFIG_BFIN_SPORT=m
 # CONFIG_BFIN_TIMER_LATENCY is not set
-# CONFIG_TWI_LCD is not set
-CONFIG_BFIN_DMA_INTERFACE=m
+# CONFIG_BFIN_TWI_LCD is not set
 CONFIG_SIMPLE_GPIO=m
 # CONFIG_VT is not set
 # CONFIG_DEVKMEM is not set
@@ -823,7 +823,30 @@ CONFIG_SPI_BFIN=y
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
@@ -1123,16 +1146,6 @@ CONFIG_SYSFS=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
-CONFIG_YAFFS_FS=m
-CONFIG_YAFFS_YAFFS1=y
-# CONFIG_YAFFS_9BYTE_TAGS is not set
-# CONFIG_YAFFS_DOES_ECC is not set
-CONFIG_YAFFS_YAFFS2=y
-CONFIG_YAFFS_AUTO_YAFFS2=y
-# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set
-# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set
-# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set
-CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
 CONFIG_JFFS2_FS=m
 CONFIG_JFFS2_FS_DEBUG=0
 CONFIG_JFFS2_FS_WRITEBUFFER=y
@@ -1144,6 +1157,16 @@ CONFIG_JFFS2_ZLIB=y
 # CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
+CONFIG_YAFFS_FS=m
+CONFIG_YAFFS_YAFFS1=y
+# CONFIG_YAFFS_9BYTE_TAGS is not set
+# CONFIG_YAFFS_DOES_ECC is not set
+CONFIG_YAFFS_YAFFS2=y
+CONFIG_YAFFS_AUTO_YAFFS2=y
+# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set
+# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set
+# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set
+CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
@@ -1232,7 +1255,7 @@ CONFIG_FRAME_WARN=1024
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DEBUG_SHIRQ=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
@@ -1241,8 +1264,6 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_TIMER_STATS is not set
 # CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
@@ -1262,7 +1283,6 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_FAULT_INJECTION is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
 
 #
 # Tracers
@@ -1278,16 +1298,20 @@ CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_VERBOSE=y
 CONFIG_DEBUG_MMRS=y
-# CONFIG_DEBUG_HWERR is not set
-# CONFIG_DEBUG_DOUBLEFAULT is not set
+CONFIG_DEBUG_HWERR=y
+CONFIG_EXACT_HWERR=y
+CONFIG_DEBUG_DOUBLEFAULT=y
+CONFIG_DEBUG_DOUBLEFAULT_PRINT=y
+# CONFIG_DEBUG_DOUBLEFAULT_RESET is not set
+# CONFIG_DEBUG_ICACHE_CHECK is not set
 CONFIG_DEBUG_HUNT_FOR_ZERO=y
 CONFIG_DEBUG_BFIN_HWTRACE_ON=y
-CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y
-# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE is not set
+# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF is not set
+CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE=y
 # CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_TWO is not set
-CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0
+CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=1
 # CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set
-# CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set
+CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_CPLB_INFO=y
 CONFIG_ACCESS_CHECK=y
@@ -1400,7 +1424,6 @@ CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=m
-CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y

arch/blackfin/configs/BF538-EZKIT_defconfig

@@ -1,6 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28.7
+# Linux kernel version: 2.6.28.10
+# Thu May 21 05:50:01 2009
 #
 # CONFIG_MMU is not set
 # CONFIG_FPU is not set
@@ -42,10 +43,11 @@ CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-# CONFIG_SYSCTL is not set
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
+# CONFIG_SYSCTL_SYSCALL is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -53,16 +55,15 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 # CONFIG_ELF_CORE is not set
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 # CONFIG_FUTEX is not set
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
+# CONFIG_SIGNALFD is not set
+# CONFIG_TIMERFD is not set
+# CONFIG_EVENTFD is not set
 # CONFIG_AIO is not set
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
@@ -71,7 +72,6 @@ CONFIG_SLAB=y
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
 CONFIG_TINY_SHMEM=y
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
@@ -243,7 +243,10 @@ CONFIG_HZ=250
 CONFIG_SCHED_HRTICK=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_TICKSOURCE_GPTMR0 is not set
+CONFIG_TICKSOURCE_CORETMR=y
 # CONFIG_CYCLES_CLOCKSOURCE is not set
+# CONFIG_GPTMR0_CLOCKSOURCE is not set
 CONFIG_TICK_ONESHOT=y
 # CONFIG_NO_HZ is not set
 CONFIG_HIGH_RES_TIMERS=y
@@ -389,7 +392,7 @@ CONFIG_IP_PNP=y
 # CONFIG_NET_IPIP is not set
 # CONFIG_NET_IPGRE is not set
 # CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
+# CONFIG_SYN_COOKIES is not set
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
@@ -546,9 +549,7 @@ CONFIG_MTD_ROM=m
 #
 # CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=m
-CONFIG_MTD_PHYSMAP_START=0x20000000
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
 # CONFIG_MTD_UCLINUX is not set
 # CONFIG_MTD_PLATRAM is not set
 
@@ -691,11 +692,11 @@ CONFIG_INPUT_EVDEV=m
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_ADS7846 is not set
 # CONFIG_TOUCHSCREEN_AD7877 is not set
 # CONFIG_TOUCHSCREEN_AD7879_I2C is not set
 CONFIG_TOUCHSCREEN_AD7879_SPI=y
 CONFIG_TOUCHSCREEN_AD7879=y
+# CONFIG_TOUCHSCREEN_ADS7846 is not set
 # CONFIG_TOUCHSCREEN_FUJITSU is not set
 # CONFIG_TOUCHSCREEN_GUNZE is not set
 # CONFIG_TOUCHSCREEN_ELO is not set
@@ -720,14 +721,14 @@ CONFIG_INPUT_MISC=y
 # Character devices
 #
 # CONFIG_AD9960 is not set
-# CONFIG_SPI_ADC_BF533 is not set
-# CONFIG_BF5xx_PPIFCD is not set
+CONFIG_BFIN_DMA_INTERFACE=m
+# CONFIG_BFIN_PPI is not set
+# CONFIG_BFIN_PPIFCD is not set
 # CONFIG_BFIN_SIMPLE_TIMER is not set
-CONFIG_BF5xx_PPI=m
+# CONFIG_BFIN_SPI_ADC is not set
 CONFIG_BFIN_SPORT=m
 # CONFIG_BFIN_TIMER_LATENCY is not set
-# CONFIG_TWI_LCD is not set
-CONFIG_BFIN_DMA_INTERFACE=m
+# CONFIG_BFIN_TWI_LCD is not set
 CONFIG_SIMPLE_GPIO=m
 # CONFIG_VT is not set
 # CONFIG_DEVKMEM is not set
@@ -833,7 +834,30 @@ CONFIG_SPI_BFIN=y
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
@@ -1056,16 +1080,6 @@ CONFIG_SYSFS=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
-CONFIG_YAFFS_FS=m
-CONFIG_YAFFS_YAFFS1=y
-# CONFIG_YAFFS_9BYTE_TAGS is not set
-# CONFIG_YAFFS_DOES_ECC is not set
-CONFIG_YAFFS_YAFFS2=y
-CONFIG_YAFFS_AUTO_YAFFS2=y
-# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set
-# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set
-# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set
-CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
 CONFIG_JFFS2_FS=m
 CONFIG_JFFS2_FS_DEBUG=0
 CONFIG_JFFS2_FS_WRITEBUFFER=y
@@ -1077,6 +1091,16 @@ CONFIG_JFFS2_ZLIB=y
 # CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
+CONFIG_YAFFS_FS=m
+CONFIG_YAFFS_YAFFS1=y
+# CONFIG_YAFFS_9BYTE_TAGS is not set
+# CONFIG_YAFFS_DOES_ECC is not set
+CONFIG_YAFFS_YAFFS2=y
+CONFIG_YAFFS_AUTO_YAFFS2=y
+# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set
+# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set
+# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set
+CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
@@ -1165,7 +1189,7 @@ CONFIG_FRAME_WARN=1024
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DEBUG_SHIRQ=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
@@ -1174,8 +1198,6 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_TIMER_STATS is not set
 # CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
@@ -1195,7 +1217,6 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_FAULT_INJECTION is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 
 #
 # Tracers
@@ -1211,16 +1232,20 @@ CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_VERBOSE=y
 CONFIG_DEBUG_MMRS=y
-# CONFIG_DEBUG_HWERR is not set
-# CONFIG_DEBUG_DOUBLEFAULT is not set
+CONFIG_DEBUG_HWERR=y
+CONFIG_EXACT_HWERR=y
+CONFIG_DEBUG_DOUBLEFAULT=y
+CONFIG_DEBUG_DOUBLEFAULT_PRINT=y
+# CONFIG_DEBUG_DOUBLEFAULT_RESET is not set
+# CONFIG_DEBUG_ICACHE_CHECK is not set
 CONFIG_DEBUG_HUNT_FOR_ZERO=y
 CONFIG_DEBUG_BFIN_HWTRACE_ON=y
-CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y
-# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE is not set
+# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF is not set
+CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE=y
 # CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_TWO is not set
-CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0
+CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=1
 # CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set
-# CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set
+CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_CPLB_INFO=y
 CONFIG_ACCESS_CHECK=y
@@ -1333,7 +1358,6 @@ CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=m
-CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y

arch/blackfin/configs/BF548-EZKIT_defconfig

@@ -1,6 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28.7
+# Linux kernel version: 2.6.28.10
+# Thu May 21 05:50:01 2009
 #
 # CONFIG_MMU is not set
 # CONFIG_FPU is not set
@@ -42,10 +43,11 @@ CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-# CONFIG_SYSCTL is not set
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
+# CONFIG_SYSCTL_SYSCALL is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -53,16 +55,15 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 # CONFIG_ELF_CORE is not set
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 # CONFIG_FUTEX is not set
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
+# CONFIG_SIGNALFD is not set
+# CONFIG_TIMERFD is not set
+# CONFIG_EVENTFD is not set
 # CONFIG_AIO is not set
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
@@ -71,7 +72,6 @@ CONFIG_SLAB=y
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
 CONFIG_TINY_SHMEM=y
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
@@ -196,6 +196,7 @@ CONFIG_BFIN548_EZKIT=y
 # BF548 Specific Configuration
 #
 # CONFIG_DEB_DMA_URGENT is not set
+# CONFIG_BF548_ATAPI_ALTERNATIVE_PORT is not set
 
 #
 # Interrupt Priority Assignment
@@ -298,7 +299,10 @@ CONFIG_HZ=250
 # CONFIG_SCHED_HRTICK is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_TICKSOURCE_GPTMR0 is not set
+CONFIG_TICKSOURCE_CORETMR=y
 # CONFIG_CYCLES_CLOCKSOURCE is not set
+# CONFIG_GPTMR0_CLOCKSOURCE is not set
 # CONFIG_NO_HZ is not set
 # CONFIG_HIGH_RES_TIMERS is not set
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
@@ -367,7 +371,9 @@ CONFIG_BFIN_DCACHE=y
 # CONFIG_BFIN_ICACHE_LOCK is not set
 CONFIG_BFIN_WB=y
 # CONFIG_BFIN_WT is not set
-# CONFIG_BFIN_L2_CACHEABLE is not set
+# CONFIG_BFIN_L2_WB is not set
+CONFIG_BFIN_L2_WT=y
+# CONFIG_BFIN_L2_NOT_CACHED is not set
 # CONFIG_MPU is not set
 
 #
@@ -447,7 +453,7 @@ CONFIG_IP_PNP=y
 # CONFIG_NET_IPIP is not set
 # CONFIG_NET_IPGRE is not set
 # CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
+# CONFIG_SYN_COOKIES is not set
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
@@ -616,9 +622,7 @@ CONFIG_MTD_RAM=y
 #
 CONFIG_MTD_COMPLEX_MAPPINGS=y
 CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x20000000
-CONFIG_MTD_PHYSMAP_LEN=0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
 # CONFIG_MTD_GPIO_ADDR is not set
 # CONFIG_MTD_UCLINUX is not set
 # CONFIG_MTD_PLATRAM is not set
@@ -696,7 +700,7 @@ CONFIG_SCSI_DMA=y
 CONFIG_BLK_DEV_SD=y
 # CONFIG_CHR_DEV_ST is not set
 # CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=y
+CONFIG_BLK_DEV_SR=m
 # CONFIG_BLK_DEV_SR_VENDOR is not set
 # CONFIG_CHR_DEV_SG is not set
 # CONFIG_CHR_DEV_SCH is not set
@@ -718,9 +722,7 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_ISCSI_ATTRS is not set
 # CONFIG_SCSI_SAS_LIBSAS is not set
 # CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_LOWLEVEL is not set
 # CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
@@ -752,9 +754,8 @@ CONFIG_SMSC911X=y
 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_AX88180 is not set
-CONFIG_NETDEV_10000=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
 
 #
 # Wireless LAN
@@ -821,11 +822,11 @@ CONFIG_KEYBOARD_BFIN=y
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_ADS7846 is not set
 CONFIG_TOUCHSCREEN_AD7877=m
 # CONFIG_TOUCHSCREEN_AD7879_I2C is not set
 # CONFIG_TOUCHSCREEN_AD7879_SPI is not set
 # CONFIG_TOUCHSCREEN_AD7879 is not set
+# CONFIG_TOUCHSCREEN_ADS7846 is not set
 # CONFIG_TOUCHSCREEN_FUJITSU is not set
 # CONFIG_TOUCHSCREEN_GUNZE is not set
 # CONFIG_TOUCHSCREEN_ELO is not set
@@ -858,14 +859,14 @@ CONFIG_INPUT_MISC=y
 # Character devices
 #
 # CONFIG_AD9960 is not set
-# CONFIG_SPI_ADC_BF533 is not set
-# CONFIG_BF5xx_PPIFCD is not set
+CONFIG_BFIN_DMA_INTERFACE=m
+# CONFIG_BFIN_PPI is not set
+# CONFIG_BFIN_PPIFCD is not set
 # CONFIG_BFIN_SIMPLE_TIMER is not set
-CONFIG_BF5xx_PPI=m
+# CONFIG_BFIN_SPI_ADC is not set
 CONFIG_BFIN_SPORT=m
 # CONFIG_BFIN_TIMER_LATENCY is not set
-# CONFIG_TWI_LCD is not set
-CONFIG_BFIN_DMA_INTERFACE=m
+# CONFIG_BFIN_TWI_LCD is not set
 CONFIG_SIMPLE_GPIO=m
 CONFIG_VT=y
 CONFIG_CONSOLE_TRANSLATIONS=y
@@ -977,7 +978,30 @@ CONFIG_SPI_BFIN=y
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
@@ -1011,6 +1035,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_REGULATOR is not set
@@ -1193,8 +1218,8 @@ CONFIG_USB=y
 #
 # Miscellaneous USB options
 #
-# CONFIG_USB_DEVICEFS is not set
-CONFIG_USB_DEVICE_CLASS=y
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_OTG is not set
 # CONFIG_USB_OTG_WHITELIST is not set
@@ -1222,10 +1247,10 @@ CONFIG_USB_MUSB_SOC=y
 CONFIG_USB_MUSB_HOST=y
 # CONFIG_USB_MUSB_PERIPHERAL is not set
 # CONFIG_USB_MUSB_OTG is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
 CONFIG_USB_MUSB_HDRC_HCD=y
-CONFIG_MUSB_PIO_ONLY=y
-CONFIG_MUSB_DMA_POLL=y
+# CONFIG_MUSB_PIO_ONLY is not set
+CONFIG_USB_INVENTRA_DMA=y
+# CONFIG_USB_TI_CPPI_DMA is not set
 # CONFIG_USB_MUSB_DEBUG is not set
 
 #
@@ -1243,7 +1268,7 @@ CONFIG_MUSB_DMA_POLL=y
 #
 # see USB_STORAGE Help for more information
 #
-CONFIG_USB_STORAGE=m
+CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
 # CONFIG_USB_STORAGE_DATAFAB is not set
 # CONFIG_USB_STORAGE_FREECOM is not set
@@ -1292,33 +1317,10 @@ CONFIG_USB_STORAGE=m
 # CONFIG_USB_LD is not set
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
 # CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_NET2272 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_ZERO is not set
-# CONFIG_USB_AUDIO is not set
-# CONFIG_USB_ETH is not set
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
-# CONFIG_USB_CDC_COMPOSITE is not set
 CONFIG_MMC=y
 # CONFIG_MMC_DEBUG is not set
 # CONFIG_MMC_UNSAFE_RESUME is not set
@@ -1414,13 +1416,8 @@ CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 # CONFIG_EXT2_FS_POSIX_ACL is not set
 # CONFIG_EXT2_FS_SECURITY is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT3_FS is not set
 # CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
@@ -1476,16 +1473,6 @@ CONFIG_SYSFS=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
-CONFIG_YAFFS_FS=m
-CONFIG_YAFFS_YAFFS1=y
-# CONFIG_YAFFS_9BYTE_TAGS is not set
-# CONFIG_YAFFS_DOES_ECC is not set
-CONFIG_YAFFS_YAFFS2=y
-CONFIG_YAFFS_AUTO_YAFFS2=y
-# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set
-# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set
-# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set
-CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
 CONFIG_JFFS2_FS=m
 CONFIG_JFFS2_FS_DEBUG=0
 CONFIG_JFFS2_FS_WRITEBUFFER=y
@@ -1497,6 +1484,16 @@ CONFIG_JFFS2_ZLIB=y
 # CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
+CONFIG_YAFFS_FS=m
+CONFIG_YAFFS_YAFFS1=y
+# CONFIG_YAFFS_9BYTE_TAGS is not set
+# CONFIG_YAFFS_DOES_ECC is not set
+CONFIG_YAFFS_YAFFS2=y
+CONFIG_YAFFS_AUTO_YAFFS2=y
+# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set
+# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set
+# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set
+CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
@@ -1539,63 +1536,47 @@ CONFIG_CIFS=y
 #
 # Partition Types
 #
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
+# CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
 CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=m
-CONFIG_NLS_CODEPAGE_737=m
-CONFIG_NLS_CODEPAGE_775=m
-CONFIG_NLS_CODEPAGE_850=m
-CONFIG_NLS_CODEPAGE_852=m
-CONFIG_NLS_CODEPAGE_855=m
-CONFIG_NLS_CODEPAGE_857=m
-CONFIG_NLS_CODEPAGE_860=m
-CONFIG_NLS_CODEPAGE_861=m
-CONFIG_NLS_CODEPAGE_862=m
-CONFIG_NLS_CODEPAGE_863=m
-CONFIG_NLS_CODEPAGE_864=m
-CONFIG_NLS_CODEPAGE_865=m
-CONFIG_NLS_CODEPAGE_866=m
-CONFIG_NLS_CODEPAGE_869=m
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
 CONFIG_NLS_CODEPAGE_936=m
-CONFIG_NLS_CODEPAGE_950=m
-CONFIG_NLS_CODEPAGE_932=m
-CONFIG_NLS_CODEPAGE_949=m
-CONFIG_NLS_CODEPAGE_874=m
-CONFIG_NLS_ISO8859_8=m
-CONFIG_NLS_CODEPAGE_1250=m
-CONFIG_NLS_CODEPAGE_1251=m
-CONFIG_NLS_ASCII=m
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=m
-CONFIG_NLS_ISO8859_2=m
-CONFIG_NLS_ISO8859_3=m
-CONFIG_NLS_ISO8859_4=m
-CONFIG_NLS_ISO8859_5=m
-CONFIG_NLS_ISO8859_6=m
-CONFIG_NLS_ISO8859_7=m
-CONFIG_NLS_ISO8859_9=m
-CONFIG_NLS_ISO8859_13=m
-CONFIG_NLS_ISO8859_14=m
-CONFIG_NLS_ISO8859_15=m
-CONFIG_NLS_KOI8_R=m
-CONFIG_NLS_KOI8_U=m
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=m
 # CONFIG_DLM is not set
 
@@ -1611,7 +1592,7 @@ CONFIG_FRAME_WARN=1024
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DEBUG_SHIRQ=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
@@ -1620,8 +1601,6 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_TIMER_STATS is not set
 # CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
@@ -1641,7 +1620,6 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_FAULT_INJECTION is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
 
 #
 # Tracers
@@ -1657,16 +1635,20 @@ CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_VERBOSE=y
 CONFIG_DEBUG_MMRS=y
-# CONFIG_DEBUG_HWERR is not set
-# CONFIG_DEBUG_DOUBLEFAULT is not set
+CONFIG_DEBUG_HWERR=y
+CONFIG_EXACT_HWERR=y
+CONFIG_DEBUG_DOUBLEFAULT=y
+CONFIG_DEBUG_DOUBLEFAULT_PRINT=y
+# CONFIG_DEBUG_DOUBLEFAULT_RESET is not set
+# CONFIG_DEBUG_ICACHE_CHECK is not set
 CONFIG_DEBUG_HUNT_FOR_ZERO=y
 CONFIG_DEBUG_BFIN_HWTRACE_ON=y
-CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y
-# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE is not set
+# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF is not set
+CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE=y
 # CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_TWO is not set
-CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0
+CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=1
 # CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set
-# CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set
+CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_CPLB_INFO=y
 CONFIG_ACCESS_CHECK=y
@@ -1780,7 +1762,6 @@ CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=m
-CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y

arch/blackfin/configs/BF561-EZKIT_defconfig

@@ -1,6 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28.7
+# Linux kernel version: 2.6.28.10
+# Thu May 21 05:50:01 2009
 #
 # CONFIG_MMU is not set
 # CONFIG_FPU is not set
@@ -42,10 +43,11 @@ CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-# CONFIG_SYSCTL is not set
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
+# CONFIG_SYSCTL_SYSCALL is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -53,16 +55,15 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 # CONFIG_ELF_CORE is not set
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 # CONFIG_FUTEX is not set
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
+# CONFIG_SIGNALFD is not set
+# CONFIG_TIMERFD is not set
+# CONFIG_EVENTFD is not set
 # CONFIG_AIO is not set
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
@@ -71,7 +72,6 @@ CONFIG_SLAB=y
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
 CONFIG_TINY_SHMEM=y
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
@@ -148,9 +148,9 @@ CONFIG_BF_REV_MAX=5
 # CONFIG_BF_REV_0_0 is not set
 # CONFIG_BF_REV_0_1 is not set
 # CONFIG_BF_REV_0_2 is not set
-CONFIG_BF_REV_0_3=y
+# CONFIG_BF_REV_0_3 is not set
 # CONFIG_BF_REV_0_4 is not set
-# CONFIG_BF_REV_0_5 is not set
+CONFIG_BF_REV_0_5=y
 # CONFIG_BF_REV_0_6 is not set
 # CONFIG_BF_REV_ANY is not set
 # CONFIG_BF_REV_NONE is not set
@@ -179,7 +179,6 @@ CONFIG_BFIN561_EZKIT=y
 # Core B Support
 #
 CONFIG_BF561_COREB=y
-CONFIG_BF561_COREB_RESET=y
 
 #
 # Interrupt Priority Assignment
@@ -264,7 +263,10 @@ CONFIG_HZ=250
 CONFIG_SCHED_HRTICK=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_TICKSOURCE_GPTMR0 is not set
+CONFIG_TICKSOURCE_CORETMR=y
 # CONFIG_CYCLES_CLOCKSOURCE is not set
+# CONFIG_GPTMR0_CLOCKSOURCE is not set
 CONFIG_TICK_ONESHOT=y
 # CONFIG_NO_HZ is not set
 CONFIG_HIGH_RES_TIMERS=y
@@ -334,7 +336,9 @@ CONFIG_BFIN_DCACHE=y
 # CONFIG_BFIN_ICACHE_LOCK is not set
 CONFIG_BFIN_WB=y
 # CONFIG_BFIN_WT is not set
-# CONFIG_BFIN_L2_CACHEABLE is not set
+# CONFIG_BFIN_L2_WB is not set
+CONFIG_BFIN_L2_WT=y
+# CONFIG_BFIN_L2_NOT_CACHED is not set
 # CONFIG_MPU is not set
 
 #
@@ -415,7 +419,7 @@ CONFIG_IP_PNP=y
 # CONFIG_NET_IPIP is not set
 # CONFIG_NET_IPGRE is not set
 # CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
+# CONFIG_SYN_COOKIES is not set
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
@@ -570,9 +574,7 @@ CONFIG_MTD_ROM=m
 #
 # CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=m
-CONFIG_MTD_PHYSMAP_START=0x20000000
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
 # CONFIG_MTD_UCLINUX is not set
 # CONFIG_MTD_PLATRAM is not set
 
@@ -649,9 +651,8 @@ CONFIG_SMC91X=y
 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_AX88180 is not set
-CONFIG_NETDEV_10000=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
 
 #
 # Wireless LAN
@@ -703,13 +704,13 @@ CONFIG_INPUT_EVDEV=m
 # Character devices
 #
 # CONFIG_AD9960 is not set
-# CONFIG_SPI_ADC_BF533 is not set
-# CONFIG_BF5xx_PPIFCD is not set
+CONFIG_BFIN_DMA_INTERFACE=m
+# CONFIG_BFIN_PPI is not set
+# CONFIG_BFIN_PPIFCD is not set
 # CONFIG_BFIN_SIMPLE_TIMER is not set
-# CONFIG_BF5xx_PPI is not set
+# CONFIG_BFIN_SPI_ADC is not set
 # CONFIG_BFIN_SPORT is not set
 # CONFIG_BFIN_TIMER_LATENCY is not set
-CONFIG_BFIN_DMA_INTERFACE=m
 CONFIG_SIMPLE_GPIO=m
 # CONFIG_VT is not set
 # CONFIG_DEVKMEM is not set
@@ -765,7 +766,30 @@ CONFIG_SPI_BFIN=y
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
@@ -897,16 +921,6 @@ CONFIG_SYSFS=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
-CONFIG_YAFFS_FS=m
-CONFIG_YAFFS_YAFFS1=y
-# CONFIG_YAFFS_9BYTE_TAGS is not set
-# CONFIG_YAFFS_DOES_ECC is not set
-CONFIG_YAFFS_YAFFS2=y
-CONFIG_YAFFS_AUTO_YAFFS2=y
-# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set
-# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set
-# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set
-CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
 CONFIG_JFFS2_FS=m
 CONFIG_JFFS2_FS_DEBUG=0
 CONFIG_JFFS2_FS_WRITEBUFFER=y
@@ -918,6 +932,16 @@ CONFIG_JFFS2_ZLIB=y
 # CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
+CONFIG_YAFFS_FS=m
+CONFIG_YAFFS_YAFFS1=y
+# CONFIG_YAFFS_9BYTE_TAGS is not set
+# CONFIG_YAFFS_DOES_ECC is not set
+CONFIG_YAFFS_YAFFS2=y
+CONFIG_YAFFS_AUTO_YAFFS2=y
+# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set
+# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set
+# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set
+CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
@@ -1006,7 +1030,7 @@ CONFIG_FRAME_WARN=1024
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DEBUG_SHIRQ=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
@@ -1015,8 +1039,6 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_TIMER_STATS is not set
 # CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
@@ -1036,7 +1058,6 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_FAULT_INJECTION is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
 
 #
 # Tracers
@@ -1052,16 +1073,20 @@ CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_VERBOSE=y
 CONFIG_DEBUG_MMRS=y
-# CONFIG_DEBUG_HWERR is not set
-# CONFIG_DEBUG_DOUBLEFAULT is not set
+CONFIG_DEBUG_HWERR=y
+CONFIG_EXACT_HWERR=y
+CONFIG_DEBUG_DOUBLEFAULT=y
+CONFIG_DEBUG_DOUBLEFAULT_PRINT=y
+# CONFIG_DEBUG_DOUBLEFAULT_RESET is not set
+# CONFIG_DEBUG_ICACHE_CHECK is not set
 CONFIG_DEBUG_HUNT_FOR_ZERO=y
 CONFIG_DEBUG_BFIN_HWTRACE_ON=y
-CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y
-# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE is not set
+# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF is not set
+CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE=y
 # CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_TWO is not set
-CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0
+CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=1
 # CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set
-# CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set
+CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_CPLB_INFO=y
 CONFIG_ACCESS_CHECK=y
@@ -1174,7 +1199,6 @@ CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=m
-CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y

arch/blackfin/configs/BlackStamp_defconfig

@@ -46,7 +46,7 @@ CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_SYSCTL is not set
 CONFIG_EMBEDDED=y
 CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
+# CONFIG_SYSCTL_SYSCALL is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -381,7 +381,7 @@ CONFIG_IP_PNP=y
 # CONFIG_NET_IPIP is not set
 # CONFIG_NET_IPGRE is not set
 # CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
+# CONFIG_SYN_COOKIES is not set
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set

arch/blackfin/configs/CM-BF527_defconfig

@@ -46,7 +46,7 @@ CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_SYSCTL is not set
 CONFIG_EMBEDDED=y
 CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
+# CONFIG_SYSCTL_SYSCALL is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -411,7 +411,7 @@ CONFIG_IP_PNP=y
 # CONFIG_NET_IPIP is not set
 # CONFIG_NET_IPGRE is not set
 # CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
+# CONFIG_SYN_COOKIES is not set
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
@@ -783,7 +783,30 @@ CONFIG_SPI_BFIN=y
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y

arch/blackfin/configs/CM-BF533_defconfig

@@ -49,7 +49,7 @@ CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_SYSCTL is not set
 CONFIG_EMBEDDED=y
 # CONFIG_UID16 is not set
-CONFIG_SYSCTL_SYSCALL=y
+# CONFIG_SYSCTL_SYSCALL is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 # CONFIG_HOTPLUG is not set
@@ -347,7 +347,7 @@ CONFIG_IP_FIB_HASH=y
 # CONFIG_NET_IPIP is not set
 # CONFIG_NET_IPGRE is not set
 # CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
+# CONFIG_SYN_COOKIES is not set
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
@@ -547,9 +547,9 @@ CONFIG_MII=y
 CONFIG_SMC91X=y
 # CONFIG_SMSC911X is not set
 # CONFIG_DM9000 is not set
-CONFIG_NETDEV_1000=y
+# CONFIG_NETDEV_1000 is not set
 # CONFIG_AX88180 is not set
-CONFIG_NETDEV_10000=y
+# CONFIG_NETDEV_10000 is not set
 
 #
 # Wireless LAN
@@ -641,6 +641,10 @@ CONFIG_UNIX98_PTYS=y
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_SYSFS=y
+
 #
 # SPI support
 #

arch/blackfin/configs/CM-BF537E_defconfig

@@ -1,6 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.22.16
+# Linux kernel version: 2.6.28.10
+# Wed Jun  3 06:27:41 2009
 #
 # CONFIG_MMU is not set
 # CONFIG_FPU is not set
@@ -8,48 +9,44 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
 CONFIG_BLACKFIN=y
 CONFIG_ZONE_DMA=y
-CONFIG_SEMAPHORE_SLEEPERS=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_FORCE_MAX_ZONEORDER=14
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
+# General setup
 #
 CONFIG_EXPERIMENTAL=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
 CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_SYSFS_DEPRECATED is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
 # CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-# CONFIG_SYSCTL is not set
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 # CONFIG_UID16 is not set
-CONFIG_SYSCTL_SYSCALL=y
+# CONFIG_SYSCTL_SYSCALL is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 # CONFIG_HOTPLUG is not set
@@ -58,37 +55,36 @@ CONFIG_BUG=y
 # CONFIG_ELF_CORE is not set
 CONFIG_BASE_FULL=y
 # CONFIG_FUTEX is not set
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_EVENTFD=y
+# CONFIG_SIGNALFD is not set
+# CONFIG_TIMERFD is not set
+# CONFIG_EVENTFD is not set
+# CONFIG_AIO is not set
 CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_BIG_ORDER_ALLOC_NOFAIL_MAGIC=3
-# CONFIG_NP2 is not set
+CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
-CONFIG_RT_MUTEXES=y
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
 CONFIG_TINY_SHMEM=y
 CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y
-
-#
-# Block layer
-#
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -102,9 +98,11 @@ CONFIG_IOSCHED_CFQ=y
 # CONFIG_DEFAULT_CFQ is not set
 CONFIG_DEFAULT_NOOP=y
 CONFIG_DEFAULT_IOSCHED="noop"
+CONFIG_CLASSIC_RCU=y
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
+# CONFIG_FREEZER is not set
 
 #
 # Blackfin Processor Options
@@ -113,6 +111,10 @@ CONFIG_PREEMPT_NONE=y
 #
 # Processor and Board Settings
 #
+# CONFIG_BF512 is not set
+# CONFIG_BF514 is not set
+# CONFIG_BF516 is not set
+# CONFIG_BF518 is not set
 # CONFIG_BF522 is not set
 # CONFIG_BF523 is not set
 # CONFIG_BF524 is not set
@@ -125,22 +127,31 @@ CONFIG_PREEMPT_NONE=y
 # CONFIG_BF534 is not set
 # CONFIG_BF536 is not set
 CONFIG_BF537=y
+# CONFIG_BF538 is not set
+# CONFIG_BF539 is not set
 # CONFIG_BF542 is not set
+# CONFIG_BF542M is not set
 # CONFIG_BF544 is not set
+# CONFIG_BF544M is not set
 # CONFIG_BF547 is not set
+# CONFIG_BF547M is not set
 # CONFIG_BF548 is not set
+# CONFIG_BF548M is not set
 # CONFIG_BF549 is not set
+# CONFIG_BF549M is not set
 # CONFIG_BF561 is not set
+CONFIG_BF_REV_MIN=2
+CONFIG_BF_REV_MAX=3
 # CONFIG_BF_REV_0_0 is not set
 # CONFIG_BF_REV_0_1 is not set
 CONFIG_BF_REV_0_2=y
 # CONFIG_BF_REV_0_3 is not set
 # CONFIG_BF_REV_0_4 is not set
 # CONFIG_BF_REV_0_5 is not set
+# CONFIG_BF_REV_0_6 is not set
 # CONFIG_BF_REV_ANY is not set
 # CONFIG_BF_REV_NONE is not set
 CONFIG_BF53x=y
-CONFIG_BFIN_SINGLE_CORE=y
 CONFIG_MEM_MT48LC16M16A2TG_75=y
 CONFIG_IRQ_PLL_WAKEUP=7
 CONFIG_IRQ_RTC=8
@@ -150,7 +161,6 @@ CONFIG_IRQ_SPORT0_TX=9
 CONFIG_IRQ_SPORT1_RX=9
 CONFIG_IRQ_SPORT1_TX=9
 CONFIG_IRQ_TWI=10
-CONFIG_IRQ_SPI=10
 CONFIG_IRQ_UART0_RX=10
 CONFIG_IRQ_UART0_TX=10
 CONFIG_IRQ_UART1_RX=10
@@ -169,11 +179,12 @@ CONFIG_IRQ_PORTG_INTB=12
 CONFIG_IRQ_MEM_DMA0=13
 CONFIG_IRQ_MEM_DMA1=13
 CONFIG_IRQ_WATCH=13
+CONFIG_IRQ_SPI=10
 # CONFIG_BFIN537_STAMP is not set
 CONFIG_BFIN537_BLUETECHNIX_CM=y
+# CONFIG_BFIN537_BLUETECHNIX_TCM is not set
 # CONFIG_PNAV10 is not set
 # CONFIG_CAMSIG_MINOTAUR is not set
-# CONFIG_GENERIC_BF537_BOARD is not set
 
 #
 # BF537 Specific Configuration
@@ -196,6 +207,7 @@ CONFIG_IRQ_PROG_INTA=12
 # Board customizations
 #
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_BOOT_LOAD=0x1000
 
 #
 # Clock/PLL Setup
@@ -215,13 +227,20 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_TICKSOURCE_GPTMR0 is not set
+CONFIG_TICKSOURCE_CORETMR=y
+# CONFIG_CYCLES_CLOCKSOURCE is not set
+# CONFIG_GPTMR0_CLOCKSOURCE is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 
 #
-# Memory Setup
+# Misc
 #
-CONFIG_MAX_MEM_SIZE=32
-CONFIG_MEM_ADD_WIDTH=9
-CONFIG_BOOT_LOAD=0x1000
 CONFIG_BFIN_SCRATCH_REG_RETN=y
 # CONFIG_BFIN_SCRATCH_REG_RETE is not set
 # CONFIG_BFIN_SCRATCH_REG_CYCLES is not set
@@ -248,6 +267,12 @@ CONFIG_IP_CHECKSUM_L1=y
 CONFIG_CACHELINE_ALIGNED_L1=y
 CONFIG_SYSCALL_TAB_L1=y
 CONFIG_CPLB_SWITCH_TAB_L1=y
+CONFIG_APP_STACK_L1=y
+
+#
+# Speed Optimizations
+#
+CONFIG_BFIN_INS_LOWOVERHEAD=y
 CONFIG_RAMKERNEL=y
 # CONFIG_ROMKERNEL is not set
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -256,12 +281,14 @@ CONFIG_FLATMEM_MANUAL=y
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
-CONFIG_LARGE_ALLOCS=y
+CONFIG_VIRT_TO_BUS=y
 # CONFIG_BFIN_GPTIMERS is not set
+# CONFIG_DMA_UNCACHED_4M is not set
 # CONFIG_DMA_UNCACHED_2M is not set
 CONFIG_DMA_UNCACHED_1M=y
 # CONFIG_DMA_UNCACHED_NONE is not set
@@ -275,7 +302,6 @@ CONFIG_BFIN_DCACHE=y
 # CONFIG_BFIN_ICACHE_LOCK is not set
 CONFIG_BFIN_WB=y
 # CONFIG_BFIN_WT is not set
-CONFIG_L1_MAX_PIECE=16
 # CONFIG_MPU is not set
 
 #
@@ -304,13 +330,8 @@ CONFIG_BANK_3=0xFFC2
 #
 # Bus options (PCI, PCMCIA, EISA, MCA, ISA)
 #
-# CONFIG_PCI is not set
 # CONFIG_ARCH_SUPPORTS_MSI is not set
 
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-
 #
 # Executable file formats
 #
@@ -318,22 +339,19 @@ CONFIG_BINFMT_ELF_FDPIC=y
 CONFIG_BINFMT_FLAT=y
 CONFIG_BINFMT_ZFLAT=y
 CONFIG_BINFMT_SHARED_FLAT=y
+# CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 
 #
 # Power management options
 #
 # CONFIG_PM is not set
-# CONFIG_PM_WAKEUP_BY_GPIO is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 
 #
 # CPU Frequency scaling
 #
 # CONFIG_CPU_FREQ is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -346,6 +364,7 @@ CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
@@ -358,7 +377,7 @@ CONFIG_IP_PNP=y
 # CONFIG_NET_IPIP is not set
 # CONFIG_NET_IPGRE is not set
 # CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
+# CONFIG_SYN_COOKIES is not set
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
@@ -367,6 +386,7 @@ CONFIG_SYN_COOKIES=y
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
 CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -374,8 +394,6 @@ CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETLABEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
@@ -384,6 +402,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
@@ -393,10 +412,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
 
 #
@@ -404,18 +419,14 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_PHONET is not set
+# CONFIG_WIRELESS is not set
 # CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
 
 #
 # Device Drivers
@@ -427,10 +438,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
@@ -438,6 +445,7 @@ CONFIG_MTD=y
 CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
 
 #
 # User Modules And Translation Layers
@@ -450,12 +458,15 @@ CONFIG_MTD_BLOCK=y
 # CONFIG_INFTL is not set
 # CONFIG_RFD_FTL is not set
 # CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
 
 #
 # RAM/ROM/Flash chip drivers
 #
-# CONFIG_MTD_CFI is not set
+CONFIG_MTD_CFI=y
 # CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
 CONFIG_MTD_MAP_BANK_WIDTH_1=y
 CONFIG_MTD_MAP_BANK_WIDTH_2=y
 CONFIG_MTD_MAP_BANK_WIDTH_4=y
@@ -466,6 +477,10 @@ CONFIG_MTD_CFI_I1=y
 CONFIG_MTD_CFI_I2=y
 # CONFIG_MTD_CFI_I4 is not set
 # CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
 CONFIG_MTD_RAM=y
 # CONFIG_MTD_ROM is not set
 # CONFIG_MTD_ABSENT is not set
@@ -473,7 +488,8 @@ CONFIG_MTD_RAM=y
 #
 # Mapping drivers for chip access
 #
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+CONFIG_MTD_GPIO_ADDR=y
 CONFIG_MTD_UCLINUX=y
 # CONFIG_MTD_PLATRAM is not set
 
@@ -498,33 +514,23 @@ CONFIG_MTD_UCLINUX=y
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
-
-#
-# Parallel port support
-#
 # CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
-
-#
-# Misc devices
-#
+# CONFIG_BLK_DEV_HD is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
+CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
@@ -532,22 +538,17 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
 #
 # CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
 # CONFIG_SCSI_NETLINK is not set
 # CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
 # CONFIG_MD is not set
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
+# CONFIG_VETH is not set
 CONFIG_PHYLIB=y
 
 #
@@ -561,46 +562,44 @@ CONFIG_PHYLIB=y
 # CONFIG_VITESSE_PHY is not set
 # CONFIG_SMSC_PHY is not set
 # CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
 # CONFIG_FIXED_PHY is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
+# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
-# CONFIG_SMC91X is not set
 CONFIG_BFIN_MAC=y
 CONFIG_BFIN_MAC_USE_L1=y
 CONFIG_BFIN_TX_DESC_NUM=10
 CONFIG_BFIN_RX_DESC_NUM=20
 # CONFIG_BFIN_MAC_RMII is not set
+# CONFIG_SMC91X is not set
 # CONFIG_SMSC911X is not set
 # CONFIG_DM9000 is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_AX88180 is not set
-CONFIG_NETDEV_10000=y
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
 
 #
 # Wireless LAN
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
 # CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
 # CONFIG_PHONE is not set
 
 #
@@ -618,15 +617,17 @@ CONFIG_NETDEV_10000=y
 # Character devices
 #
 # CONFIG_AD9960 is not set
-# CONFIG_SPI_ADC_BF533 is not set
-# CONFIG_BF5xx_PFLAGS is not set
-# CONFIG_BF5xx_PPIFCD is not set
+CONFIG_BFIN_DMA_INTERFACE=m
+# CONFIG_BFIN_PPI is not set
+# CONFIG_BFIN_PPIFCD is not set
 # CONFIG_BFIN_SIMPLE_TIMER is not set
-# CONFIG_BF5xx_PPI is not set
+# CONFIG_BFIN_SPI_ADC is not set
 CONFIG_BFIN_SPORT=y
 # CONFIG_BFIN_TIMER_LATENCY is not set
+# CONFIG_SIMPLE_GPIO is not set
 # CONFIG_VT is not set
 # CONFIG_DEVKMEM is not set
+# CONFIG_BFIN_JTAG_COMM is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -655,138 +656,119 @@ CONFIG_UNIX98_PTYS=y
 # CAN, the car bus and industrial fieldbus
 #
 # CONFIG_CAN4LINUX is not set
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_GEN_RTC is not set
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_SYSFS=y
 
 #
-# TPM devices
+# Memory mapped GPIO expanders:
 #
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
 
 #
-# SPI support
+# I2C GPIO expanders:
+#
+
+#
+# PCI GPIO expanders:
 #
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
 
 #
-# Dallas's 1-wire bus
+# SPI GPIO expanders:
 #
 # CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
 # CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
-# CONFIG_DAB is not set
+# CONFIG_VIDEO_MEDIA is not set
 
 #
-# Graphics support
+# Multimedia drivers
 #
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+# CONFIG_DAB is not set
 
 #
-# Display device support
+# Graphics support
 #
-# CONFIG_DISPLAY_SUPPORT is not set
 # CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 # CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
-# Sound
+# Display device support
 #
+# CONFIG_DISPLAY_SUPPORT is not set
 # CONFIG_SOUND is not set
-
-#
-# USB support
-#
+CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 # CONFIG_USB_ARCH_HAS_OHCI is not set
 # CONFIG_USB_ARCH_HAS_EHCI is not set
 # CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
 # Enable Host or Gadget support to see Inventra options
 #
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
-
-#
-# LED devices
-#
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# PBX support
-#
-# CONFIG_PBX is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
@@ -796,20 +778,18 @@ CONFIG_EXT2_FS_XATTR=y
 # CONFIG_EXT2_FS_POSIX_ACL is not set
 # CONFIG_EXT2_FS_SECURITY is not set
 # CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+# CONFIG_DNOTIFY is not set
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-# CONFIG_DNOTIFY is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -835,7 +815,6 @@ CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -848,60 +827,53 @@ CONFIG_RAMFS=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
-# CONFIG_YAFFS_FS is not set
 # CONFIG_JFFS2_FS is not set
+# CONFIG_YAFFS_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-# CONFIG_NFS_FS is not set
-# CONFIG_NFSD is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
+# CONFIG_NETWORK_FILESYSTEMS is not set
 
 #
 # Partition Types
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 # CONFIG_NLS is not set
-
-#
-# Distributed Lock Manager
-#
 # CONFIG_DLM is not set
 
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
 #
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_SECTION_MISMATCH=y
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+
+#
+# Tracers
+#
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_DEBUG_VERBOSE=y
 CONFIG_DEBUG_MMRS=y
+# CONFIG_DEBUG_DOUBLEFAULT is not set
 CONFIG_DEBUG_HUNT_FOR_ZERO=y
 CONFIG_DEBUG_BFIN_HWTRACE_ON=y
 CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y
@@ -919,13 +891,95 @@ CONFIG_ACCESS_CHECK=y
 #
 # CONFIG_KEYS is not set
 CONFIG_SECURITY=y
+# CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_NETWORK is not set
-CONFIG_SECURITY_CAPABILITIES=y
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
 
 #
-# Cryptographic options
+# Random Number Generation
 #
-# CONFIG_CRYPTO is not set
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
 
 #
 # Library routines
@@ -933,11 +987,12 @@ CONFIG_SECURITY_CAPABILITIES=y
 CONFIG_BITREVERSE=y
 CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y

arch/blackfin/configs/CM-BF537U_defconfig

@@ -49,7 +49,7 @@ CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_SYSCTL is not set
 CONFIG_EMBEDDED=y
 # CONFIG_UID16 is not set
-CONFIG_SYSCTL_SYSCALL=y
+# CONFIG_SYSCTL_SYSCALL is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 # CONFIG_HOTPLUG is not set
@@ -355,7 +355,7 @@ CONFIG_IP_FIB_HASH=y
 # CONFIG_NET_IPIP is not set
 # CONFIG_NET_IPGRE is not set
 # CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
+# CONFIG_SYN_COOKIES is not set
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
@@ -556,9 +556,9 @@ CONFIG_SMC91X=y
 # CONFIG_BFIN_MAC is not set
 # CONFIG_SMSC911X is not set
 # CONFIG_DM9000 is not set
-CONFIG_NETDEV_1000=y
+# CONFIG_NETDEV_1000 is not set
 # CONFIG_AX88180 is not set
-CONFIG_NETDEV_10000=y
+# CONFIG_NETDEV_10000 is not set
 
 #
 # Wireless LAN
@@ -652,6 +652,10 @@ CONFIG_UNIX98_PTYS=y
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_SYSFS=y
+
 #
 # SPI support
 #

arch/blackfin/configs/CM-BF548_defconfig

@@ -49,7 +49,7 @@ CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_SYSCTL is not set
 CONFIG_EMBEDDED=y
 CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
+# CONFIG_SYSCTL_SYSCALL is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
@@ -125,9 +125,9 @@ CONFIG_PREEMPT_VOLUNTARY=y
 CONFIG_BF548=y
 # CONFIG_BF549 is not set
 # CONFIG_BF561 is not set
-CONFIG_BF_REV_0_0=y
+# CONFIG_BF_REV_0_0 is not set
 # CONFIG_BF_REV_0_1 is not set
-# CONFIG_BF_REV_0_2 is not set
+CONFIG_BF_REV_0_2=y
 # CONFIG_BF_REV_0_3 is not set
 # CONFIG_BF_REV_0_4 is not set
 # CONFIG_BF_REV_0_5 is not set
@@ -422,7 +422,7 @@ CONFIG_IP_PNP=y
 # CONFIG_NET_IPIP is not set
 # CONFIG_NET_IPGRE is not set
 # CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
+# CONFIG_SYN_COOKIES is not set
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
@@ -811,6 +811,10 @@ CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_SYSFS=y
+
 #
 # SPI support
 #

arch/blackfin/configs/CM-BF561_defconfig

@@ -49,7 +49,7 @@ CONFIG_FAIR_USER_SCHED=y
 # CONFIG_SYSCTL is not set
 CONFIG_EMBEDDED=y
 # CONFIG_UID16 is not set
-CONFIG_SYSCTL_SYSCALL=y
+# CONFIG_SYSCTL_SYSCALL is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 # CONFIG_HOTPLUG is not set
@@ -389,7 +389,7 @@ CONFIG_IP_FIB_HASH=y
 # CONFIG_NET_IPIP is not set
 # CONFIG_NET_IPGRE is not set
 # CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
+# CONFIG_SYN_COOKIES is not set
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
@@ -569,9 +569,9 @@ CONFIG_SMC91X=y
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
 # CONFIG_B44 is not set
-CONFIG_NETDEV_1000=y
+# CONFIG_NETDEV_1000 is not set
 # CONFIG_AX88180 is not set
-CONFIG_NETDEV_10000=y
+# CONFIG_NETDEV_10000 is not set
 
 #
 # Wireless LAN
@@ -646,6 +646,10 @@ CONFIG_UNIX98_PTYS=y
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_SYSFS=y
+
 #
 # SPI support
 #

arch/blackfin/configs/H8606_defconfig

@@ -48,7 +48,7 @@ CONFIG_SYSFS_DEPRECATED=y
 # CONFIG_SYSCTL is not set
 CONFIG_EMBEDDED=y
 CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
+# CONFIG_SYSCTL_SYSCALL is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
@@ -347,7 +347,7 @@ CONFIG_IP_PNP=y
 # CONFIG_NET_IPIP is not set
 # CONFIG_NET_IPGRE is not set
 # CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
+# CONFIG_SYN_COOKIES is not set
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
@@ -594,8 +594,8 @@ CONFIG_MII=y
 # CONFIG_SMC91X is not set
 # CONFIG_SMSC911X is not set
 CONFIG_DM9000=y
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
 # CONFIG_AX88180 is not set
 
 #

arch/blackfin/configs/IP0X_defconfig

@@ -49,7 +49,7 @@ CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_SYSCTL is not set
 CONFIG_EMBEDDED=y
 CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
+# CONFIG_SYSCTL_SYSCALL is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 # CONFIG_HOTPLUG is not set
@@ -355,7 +355,7 @@ CONFIG_IP_PNP=y
 # CONFIG_NET_IPIP is not set
 # CONFIG_NET_IPGRE is not set
 # CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
+# CONFIG_SYN_COOKIES is not set
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
@@ -672,9 +672,9 @@ CONFIG_MII=y
 # CONFIG_SMC91X is not set
 # CONFIG_SMSC911X is not set
 CONFIG_DM9000=y
-CONFIG_NETDEV_1000=y
+# CONFIG_NETDEV_1000 is not set
 # CONFIG_AX88180 is not set
-CONFIG_NETDEV_10000=y
+# CONFIG_NETDEV_10000 is not set
 
 #
 # Wireless LAN

arch/blackfin/configs/PNAV-10_defconfig

@@ -1,6 +1,6 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28.7
+# Linux kernel version: 2.6.28.10
 #
 # CONFIG_MMU is not set
 # CONFIG_FPU is not set
@@ -40,26 +40,26 @@ CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_NAMESPACES is not set
 # CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-# CONFIG_SYSCTL is not set
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
+# CONFIG_SYSCTL_SYSCALL is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 # CONFIG_ELF_CORE is not set
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 # CONFIG_FUTEX is not set
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 # CONFIG_AIO is not set
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
@@ -68,7 +68,6 @@ CONFIG_SLAB=y
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
 CONFIG_TINY_SHMEM=y
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
@@ -229,7 +228,10 @@ CONFIG_HZ=250
 # CONFIG_SCHED_HRTICK is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_TICKSOURCE_GPTMR0 is not set
+CONFIG_TICKSOURCE_CORETMR=y
 # CONFIG_CYCLES_CLOCKSOURCE is not set
+# CONFIG_GPTMR0_CLOCKSOURCE is not set
 # CONFIG_NO_HZ is not set
 # CONFIG_HIGH_RES_TIMERS is not set
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
@@ -374,7 +376,7 @@ CONFIG_IP_PNP=y
 # CONFIG_NET_IPIP is not set
 # CONFIG_NET_IPGRE is not set
 # CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
+# CONFIG_SYN_COOKIES is not set
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
@@ -598,9 +600,8 @@ CONFIG_BFIN_MAC_RMII=y
 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_AX88180 is not set
-CONFIG_NETDEV_10000=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
 
 #
 # Wireless LAN
@@ -640,11 +641,11 @@ CONFIG_INPUT_EVDEV=y
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_ADS7846 is not set
 CONFIG_TOUCHSCREEN_AD7877=y
 # CONFIG_TOUCHSCREEN_AD7879_I2C is not set
 # CONFIG_TOUCHSCREEN_AD7879_SPI is not set
 # CONFIG_TOUCHSCREEN_AD7879 is not set
+# CONFIG_TOUCHSCREEN_ADS7846 is not set
 # CONFIG_TOUCHSCREEN_FUJITSU is not set
 # CONFIG_TOUCHSCREEN_GUNZE is not set
 # CONFIG_TOUCHSCREEN_ELO is not set
@@ -676,14 +677,14 @@ CONFIG_INPUT_UINPUT=y
 # Character devices
 #
 # CONFIG_AD9960 is not set
-# CONFIG_SPI_ADC_BF533 is not set
-# CONFIG_BF5xx_PPIFCD is not set
+CONFIG_BFIN_DMA_INTERFACE=m
+# CONFIG_BFIN_PPI is not set
+# CONFIG_BFIN_PPIFCD is not set
 # CONFIG_BFIN_SIMPLE_TIMER is not set
-# CONFIG_BF5xx_PPI is not set
+# CONFIG_BFIN_SPI_ADC is not set
 CONFIG_BFIN_SPORT=y
 # CONFIG_BFIN_TIMER_LATENCY is not set
-CONFIG_TWI_LCD=m
-CONFIG_BFIN_DMA_INTERFACE=m
+# CONFIG_BFIN_TWI_LCD is not set
 # CONFIG_SIMPLE_GPIO is not set
 # CONFIG_VT is not set
 CONFIG_DEVKMEM=y
@@ -796,6 +797,7 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD5252 is not set
 # CONFIG_SENSORS_AD7414 is not set
 # CONFIG_SENSORS_AD7418 is not set
 # CONFIG_SENSORS_ADCXX is not set
@@ -867,6 +869,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_REGULATOR is not set
@@ -1111,6 +1114,7 @@ CONFIG_SYSFS=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
 CONFIG_YAFFS_FS=y
 CONFIG_YAFFS_YAFFS1=y
 # CONFIG_YAFFS_9BYTE_TAGS is not set
@@ -1121,7 +1125,6 @@ CONFIG_YAFFS_AUTO_YAFFS2=y
 # CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set
 # CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set
 CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
-# CONFIG_JFFS2_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
@@ -1213,7 +1216,6 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
 
 #
 # Tracers
@@ -1343,7 +1345,6 @@ CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y

arch/blackfin/configs/SRV1_defconfig

@@ -52,7 +52,7 @@ CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_SYSCTL is not set
 CONFIG_EMBEDDED=y
 CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
+# CONFIG_SYSCTL_SYSCALL is not set
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -373,7 +373,7 @@ CONFIG_IP_PNP=y
 # CONFIG_NET_IPIP is not set
 # CONFIG_NET_IPGRE is not set
 # CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
+# CONFIG_SYN_COOKIES is not set
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set

arch/blackfin/configs/TCM-BF537_defconfig

@@ -42,7 +42,7 @@ CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_SYSCTL is not set
 CONFIG_EMBEDDED=y
 # CONFIG_UID16 is not set
-CONFIG_SYSCTL_SYSCALL=y
+# CONFIG_SYSCTL_SYSCALL is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 # CONFIG_HOTPLUG is not set
@@ -537,7 +537,30 @@ CONFIG_SPI_BFIN=y
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set

arch/blackfin/include/asm/cacheflush.h

@@ -30,7 +30,8 @@
 #ifndef _BLACKFIN_CACHEFLUSH_H
 #define _BLACKFIN_CACHEFLUSH_H
 
-extern void blackfin_icache_dcache_flush_range(unsigned long start_address, unsigned long end_address);
+#include <asm/blackfin.h>	/* for SSYNC() */
+
 extern void blackfin_icache_flush_range(unsigned long start_address, unsigned long end_address);
 extern void blackfin_dcache_flush_range(unsigned long start_address, unsigned long end_address);
 extern void blackfin_dcache_invalidate_range(unsigned long start_address, unsigned long end_address);
@@ -54,32 +55,28 @@ extern void blackfin_invalidate_entire_dcache(void);
 
 static inline void flush_icache_range(unsigned start, unsigned end)
 {
-#if defined(CONFIG_BFIN_DCACHE) && defined(CONFIG_BFIN_ICACHE)
-
-# if defined(CONFIG_BFIN_WT)
-	blackfin_icache_flush_range((start), (end));
-	flush_icache_range_others(start, end);
-# else
-	blackfin_icache_dcache_flush_range((start), (end));
-# endif
-
-#else
+#if defined(CONFIG_BFIN_WB)
+	blackfin_dcache_flush_range(start, end);
+#endif
 
-# if defined(CONFIG_BFIN_ICACHE)
-	blackfin_icache_flush_range((start), (end));
+	/* Make sure all write buffers in the data side of the core
+	 * are flushed before trying to invalidate the icache.  This
+	 * needs to be after the data flush and before the icache
+	 * flush so that the SSYNC does the right thing in preventing
+	 * the instruction prefetcher from hitting things in cached
+	 * memory at the wrong time -- it runs much further ahead than
+	 * the pipeline.
+	 */
+	SSYNC();
+#if defined(CONFIG_BFIN_ICACHE)
+	blackfin_icache_flush_range(start, end);
 	flush_icache_range_others(start, end);
-# endif
-# if defined(CONFIG_BFIN_DCACHE)
-	blackfin_dcache_flush_range((start), (end));
-# endif
-
 #endif
 }
 
 #define copy_to_user_page(vma, page, vaddr, dst, src, len)		\
 do { memcpy(dst, src, len);						\
      flush_icache_range((unsigned) (dst), (unsigned) (dst) + (len));	\
-     flush_icache_range_others((unsigned long) (dst), (unsigned long) (dst) + (len));\
 } while (0)
 
 #define copy_from_user_page(vma, page, vaddr, dst, src, len)	memcpy(dst, src, len)
@@ -111,6 +108,11 @@ static inline int bfin_addr_dcachable(unsigned long addr)
 		addr >= _ramend && addr < physical_mem_end)
 		return 1;
 
+#ifndef CONFIG_BFIN_L2_NOT_CACHED
+	if (addr >= L2_START && addr < L2_START + L2_LENGTH)
+		return 1;
+#endif
+
 	return 0;
 }
 

arch/blackfin/include/asm/cplb.h

@@ -53,29 +53,32 @@
 #define SDRAM_DGENERIC   (CPLB_L1_CHBL | CPLB_WT | CPLB_L1_AOW  | CPLB_COMMON)
 #endif
 
+#define SDRAM_DNON_CHBL  (CPLB_COMMON)
+#define SDRAM_EBIU       (CPLB_COMMON)
+#define SDRAM_OOPS       (CPLB_VALID | ANOMALY_05000158_WORKAROUND | CPLB_LOCK | CPLB_DIRTY)
+
 #define L1_DMEMORY       (CPLB_LOCK | CPLB_COMMON)
 
 #ifdef CONFIG_SMP
-#define L2_ATTR           (INITIAL_T | I_CPLB | D_CPLB)
-#define L2_IMEMORY         (CPLB_COMMON | CPLB_LOCK)
-#define L2_DMEMORY         (CPLB_COMMON | CPLB_LOCK)
+#define L2_ATTR          (INITIAL_T | I_CPLB | D_CPLB)
+#define L2_IMEMORY       (CPLB_COMMON)
+#define L2_DMEMORY       (CPLB_LOCK | CPLB_COMMON)
 
 #else
-#ifdef CONFIG_BFIN_L2_CACHEABLE
-#define L2_IMEMORY        (SDRAM_IGENERIC)
-#define L2_DMEMORY        (SDRAM_DGENERIC)
-#else
-#define L2_IMEMORY        (CPLB_COMMON)
-#define L2_DMEMORY        (CPLB_COMMON)
-#endif /* CONFIG_BFIN_L2_CACHEABLE */
-
-#define L2_ATTR           (INITIAL_T | SWITCH_T | I_CPLB | D_CPLB)
+#define L2_ATTR          (INITIAL_T | SWITCH_T | I_CPLB | D_CPLB)
+#define L2_IMEMORY       (SDRAM_IGENERIC)
+
+# if defined(CONFIG_BFIN_L2_WB)
+# define L2_DMEMORY      (CPLB_L1_CHBL | CPLB_COMMON)
+# elif defined(CONFIG_BFIN_L2_WT)
+# define L2_DMEMORY      (CPLB_L1_CHBL | CPLB_WT | CPLB_L1_AOW  | CPLB_COMMON)
+# elif defined(CONFIG_BFIN_L2_NOT_CACHED)
+# define L2_DMEMORY      (CPLB_COMMON)
+# else
+# define L2_DMEMORY      (0)
+# endif
 #endif /* CONFIG_SMP */
 
-#define SDRAM_DNON_CHBL  (CPLB_COMMON)
-#define SDRAM_EBIU       (CPLB_COMMON)
-#define SDRAM_OOPS       (CPLB_VALID | ANOMALY_05000158_WORKAROUND | CPLB_LOCK | CPLB_DIRTY)
-
 #define SIZE_1K 0x00000400      /* 1K */
 #define SIZE_4K 0x00001000      /* 4K */
 #define SIZE_1M 0x00100000      /* 1M */

arch/blackfin/include/asm/dma.h

@@ -206,10 +206,16 @@ static inline unsigned long get_dma_curr_addr(unsigned int channel)
 
 static inline void set_dma_sg(unsigned int channel, struct dmasg *sg, int ndsize)
 {
+	/* Make sure the internal data buffers in the core are drained
+	 * so that the DMA descriptors are completely written when the
+	 * DMA engine goes to fetch them below.
+	 */
+	SSYNC();
+
+	dma_ch[channel].regs->next_desc_ptr = sg;
 	dma_ch[channel].regs->cfg =
 		(dma_ch[channel].regs->cfg & ~(0xf << 8)) |
 		((ndsize & 0xf) << 8);
-	dma_ch[channel].regs->next_desc_ptr = sg;
 }
 
 static inline int dma_channel_active(unsigned int channel)
@@ -253,5 +259,7 @@ static inline void clear_dma_irqstat(unsigned int channel)
 void *dma_memcpy(void *dest, const void *src, size_t count);
 void *safe_dma_memcpy(void *dest, const void *src, size_t count);
 void blackfin_dma_early_init(void);
+void early_dma_memcpy(void *dest, const void *src, size_t count);
+void early_dma_memcpy_done(void);
 
 #endif

arch/blackfin/include/asm/elf.h

@@ -55,50 +55,50 @@ do {											\
 #define ELF_FDPIC_CORE_EFLAGS	EF_BFIN_FDPIC
 #define ELF_EXEC_PAGESIZE	4096
 
-#define	R_unused0	0	/* relocation type 0 is not defined */
-#define R_pcrel5m2	1	/*LSETUP part a */
-#define R_unused1	2	/* relocation type 2 is not defined */
-#define R_pcrel10	3	/* type 3, if cc jump <target>  */
-#define R_pcrel12_jump	4	/* type 4, jump <target> */
-#define R_rimm16	5	/* type 0x5, rN = <target> */
-#define R_luimm16	6	/* # 0x6, preg.l=<target> Load imm 16 to lower half */
-#define R_huimm16  	7	/* # 0x7, preg.h=<target> Load imm 16 to upper half */
-#define R_pcrel12_jump_s 8	/* # 0x8 jump.s <target> */
-#define R_pcrel24_jump_x 9	/* # 0x9 jump.x <target> */
-#define R_pcrel24       10	/* # 0xa call <target> , not expandable */
-#define R_unusedb       11	/* # 0xb not generated */
-#define R_unusedc       12	/* # 0xc  not used */
-#define R_pcrel24_jump_l 13	/*0xd jump.l <target> */
-#define R_pcrel24_call_x 14	/* 0xE, call.x <target> if <target> is above 24 bit limit call through P1 */
-#define R_var_eq_symb    15	/* 0xf, linker should treat it same as 0x12 */
-#define R_byte_data      16	/* 0x10, .byte var = symbol */
-#define R_byte2_data     17	/* 0x11, .byte2 var = symbol */
-#define R_byte4_data     18	/* 0x12, .byte4 var = symbol and .var var=symbol */
-#define R_pcrel11        19	/* 0x13, lsetup part b */
-#define R_unused14      20	/* 0x14, undefined */
-#define R_unused15       21	/* not generated by VDSP 3.5 */
+#define R_BFIN_UNUSED0         0   /* relocation type 0 is not defined */
+#define R_BFIN_PCREL5M2        1   /* LSETUP part a */
+#define R_BFIN_UNUSED1         2   /* relocation type 2 is not defined */
+#define R_BFIN_PCREL10         3   /* type 3, if cc jump <target> */
+#define R_BFIN_PCREL12_JUMP    4   /* type 4, jump <target> */
+#define R_BFIN_RIMM16          5   /* type 0x5, rN = <target> */
+#define R_BFIN_LUIMM16         6   /* # 0x6, preg.l=<target> Load imm 16 to lower half */
+#define R_BFIN_HUIMM16         7   /* # 0x7, preg.h=<target> Load imm 16 to upper half */
+#define R_BFIN_PCREL12_JUMP_S  8   /* # 0x8 jump.s <target> */
+#define R_BFIN_PCREL24_JUMP_X  9   /* # 0x9 jump.x <target> */
+#define R_BFIN_PCREL24         10  /* # 0xa call <target> , not expandable */
+#define R_BFIN_UNUSEDB         11  /* # 0xb not generated */
+#define R_BFIN_UNUSEDC         12  /* # 0xc  not used */
+#define R_BFIN_PCREL24_JUMP_L  13  /* 0xd jump.l <target> */
+#define R_BFIN_PCREL24_CALL_X  14  /* 0xE, call.x <target> if <target> is above 24 bit limit call through P1 */
+#define R_BFIN_VAR_EQ_SYMB     15  /* 0xf, linker should treat it same as 0x12 */
+#define R_BFIN_BYTE_DATA       16  /* 0x10, .byte var = symbol */
+#define R_BFIN_BYTE2_DATA      17  /* 0x11, .byte2 var = symbol */
+#define R_BFIN_BYTE4_DATA      18  /* 0x12, .byte4 var = symbol and .var var=symbol */
+#define R_BFIN_PCREL11         19  /* 0x13, lsetup part b */
+#define R_BFIN_UNUSED14        20  /* 0x14, undefined */
+#define R_BFIN_UNUSED15        21  /* not generated by VDSP 3.5 */
 
 /* arithmetic relocations */
-#define R_push		 0xE0
-#define R_const		 0xE1
-#define R_add		 0xE2
-#define R_sub		 0xE3
-#define R_mult		 0xE4
-#define R_div		 0xE5
-#define R_mod		 0xE6
-#define R_lshift	 0xE7
-#define R_rshift	 0xE8
-#define R_and		 0xE9
-#define R_or		 0xEA
-#define R_xor		 0xEB
-#define R_land		 0xEC
-#define R_lor		 0xED
-#define R_len		 0xEE
-#define R_neg		 0xEF
-#define R_comp		 0xF0
-#define R_page		 0xF1
-#define R_hwpage	 0xF2
-#define R_addr		 0xF3
+#define R_BFIN_PUSH            0xE0
+#define R_BFIN_CONST           0xE1
+#define R_BFIN_ADD             0xE2
+#define R_BFIN_SUB             0xE3
+#define R_BFIN_MULT            0xE4
+#define R_BFIN_DIV             0xE5
+#define R_BFIN_MOD             0xE6
+#define R_BFIN_LSHIFT          0xE7
+#define R_BFIN_RSHIFT          0xE8
+#define R_BFIN_AND             0xE9
+#define R_BFIN_OR              0xEA
+#define R_BFIN_XOR             0xEB
+#define R_BFIN_LAND            0xEC
+#define R_BFIN_LOR             0xED
+#define R_BFIN_LEN             0xEE
+#define R_BFIN_NEG             0xEF
+#define R_BFIN_COMP            0xF0
+#define R_BFIN_PAGE            0xF1
+#define R_BFIN_HWPAGE          0xF2
+#define R_BFIN_ADDR            0xF3
 
 /* This is the location that an ET_DYN program is loaded if exec'ed.  Typical
    use of this is to invoke "./ld.so someprog" to test out a new version of

arch/blackfin/include/asm/entry.h

@@ -35,21 +35,39 @@
 #else
 # define LOAD_IPIPE_IPEND
 #endif
+
+#ifndef CONFIG_EXACT_HWERR
+/* As a debugging aid - we save IPEND when DEBUG_KERNEL is on,
+ * otherwise it is a waste of cycles.
+ */
+# ifndef CONFIG_DEBUG_KERNEL
+#define INTERRUPT_ENTRY(N)						\
+    [--sp] = SYSCFG;							\
+    [--sp] = P0;	/*orig_p0*/					\
+    [--sp] = R0;	/*orig_r0*/					\
+    [--sp] = (R7:0,P5:0);						\
+    R0 = (N);								\
+    LOAD_IPIPE_IPEND							\
+    jump __common_int_entry;
+# else /* CONFIG_DEBUG_KERNEL */
 #define INTERRUPT_ENTRY(N)						\
     [--sp] = SYSCFG;							\
-									\
     [--sp] = P0;	/*orig_p0*/					\
     [--sp] = R0;	/*orig_r0*/					\
     [--sp] = (R7:0,P5:0);						\
+    p0.l = lo(IPEND);							\
+    p0.h = hi(IPEND);							\
+    r1 = [p0];								\
     R0 = (N);								\
     LOAD_IPIPE_IPEND							\
     jump __common_int_entry;
+# endif /* CONFIG_DEBUG_KERNEL */
 
 /* For timer interrupts, we need to save IPEND, since the user_mode
-	   macro accesses it to determine where to account time.  */
+ *macro accesses it to determine where to account time.
+ */
 #define TIMER_INTERRUPT_ENTRY(N)					\
     [--sp] = SYSCFG;							\
-									\
     [--sp] = P0;	/*orig_p0*/					\
     [--sp] = R0;	/*orig_r0*/					\
     [--sp] = (R7:0,P5:0);						\
@@ -58,6 +76,74 @@
     r1 = [p0];								\
     R0 = (N);								\
     jump __common_int_entry;
+#else /* CONFIG_EXACT_HWERR is defined */
+
+/* if we want hardware error to be exact, we need to do a SSYNC (which forces
+ * read/writes to complete to the memory controllers), and check to see that
+ * caused a pending HW error condition. If so, we assume it was caused by user
+ * space, by setting the same interrupt that we are in (so it goes off again)
+ * and context restore, and a RTI (without servicing anything). This should
+ * cause the pending HWERR to fire, and when that is done, this interrupt will
+ * be re-serviced properly.
+ * As you can see by the code - we actually need to do two SSYNCS - one to
+ * make sure the read/writes complete, and another to make sure the hardware
+ * error is recognized by the core.
+ */
+#define INTERRUPT_ENTRY(N)						\
+    SSYNC;								\
+    SSYNC;								\
+    [--sp] = SYSCFG;							\
+    [--sp] = P0;	/*orig_p0*/					\
+    [--sp] = R0;	/*orig_r0*/					\
+    [--sp] = (R7:0,P5:0);						\
+    R1 = ASTAT;								\
+    P0.L = LO(ILAT);							\
+    P0.H = HI(ILAT);							\
+    R0 = [P0];								\
+    CC = BITTST(R0, EVT_IVHW_P);					\
+    IF CC JUMP 1f;							\
+    ASTAT = R1;								\
+    p0.l = lo(IPEND);							\
+    p0.h = hi(IPEND);							\
+    r1 = [p0];								\
+    R0 = (N);								\
+    LOAD_IPIPE_IPEND							\
+    jump __common_int_entry;						\
+1:  ASTAT = R1;								\
+    RAISE N;								\
+    (R7:0, P5:0) = [SP++];						\
+    SP += 0x8;								\
+    SYSCFG = [SP++];							\
+    CSYNC;								\
+    RTI;
+
+#define TIMER_INTERRUPT_ENTRY(N)					\
+    SSYNC;								\
+    SSYNC;								\
+    [--sp] = SYSCFG;							\
+    [--sp] = P0;	/*orig_p0*/					\
+    [--sp] = R0;	/*orig_r0*/					\
+    [--sp] = (R7:0,P5:0);						\
+    R1 = ASTAT;								\
+    P0.L = LO(ILAT);							\
+    P0.H = HI(ILAT);							\
+    R0 = [P0];								\
+    CC = BITTST(R0, EVT_IVHW_P);					\
+    IF CC JUMP 1f;							\
+    ASTAT = R1;								\
+    p0.l = lo(IPEND);							\
+    p0.h = hi(IPEND);							\
+    r1 = [p0];								\
+    R0 = (N);								\
+    jump __common_int_entry;						\
+1:  ASTAT = R1;								\
+    RAISE N;								\
+    (R7:0, P5:0) = [SP++];						\
+    SP += 0x8;								\
+    SYSCFG = [SP++];							\
+    CSYNC;								\
+    RTI;
+#endif	/* CONFIG_EXACT_HWERR */
 
 /* This one pushes RETI without using CLI.  Interrupts are enabled.  */
 #define SAVE_CONTEXT_SYSCALL	save_context_syscall

arch/blackfin/include/asm/gptimers.h

@@ -30,6 +30,7 @@
 # else
 #  define MAX_BLACKFIN_GPTIMERS 11
 #  define TIMER8_GROUP_REG      TIMER_ENABLE1
+#  define TIMER_GROUP2          1
 # endif
 # define TIMER0_GROUP_REG       TIMER_ENABLE0
 #endif
@@ -40,10 +41,12 @@
 # define MAX_BLACKFIN_GPTIMERS 12
 # define TIMER0_GROUP_REG      TMRS8_ENABLE
 # define TIMER8_GROUP_REG      TMRS4_ENABLE
+# define TIMER_GROUP2          1
 #endif
 /*
  * All others: 3 timers:
  */
+#define TIMER_GROUP1           0
 #if !defined(MAX_BLACKFIN_GPTIMERS)
 # define MAX_BLACKFIN_GPTIMERS 3
 # define TIMER0_GROUP_REG      TIMER_ENABLE
@@ -109,8 +112,8 @@
 #define TIMER_ERR_PROG_PER  0x8000
 #define TIMER_ERR_PROG_PW   0xC000
 #define TIMER_EMU_RUN       0x0200
-#define	TIMER_TOGGLE_HI     0x0100
-#define	TIMER_CLK_SEL       0x0080
+#define TIMER_TOGGLE_HI     0x0100
+#define TIMER_CLK_SEL       0x0080
 #define TIMER_OUT_DIS       0x0040
 #define TIMER_TIN_SEL       0x0020
 #define TIMER_IRQ_ENA       0x0010
@@ -169,23 +172,25 @@
 
 /* The actual gptimer API */
 
-void     set_gptimer_pwidth    (int timer_id, uint32_t width);
-uint32_t get_gptimer_pwidth    (int timer_id);
-void     set_gptimer_period    (int timer_id, uint32_t period);
-uint32_t get_gptimer_period    (int timer_id);
-uint32_t get_gptimer_count     (int timer_id);
-uint16_t get_gptimer_intr      (int timer_id);
-void     clear_gptimer_intr    (int timer_id);
-uint16_t get_gptimer_over      (int timer_id);
-void     clear_gptimer_over    (int timer_id);
-void     set_gptimer_config    (int timer_id, uint16_t config);
-uint16_t get_gptimer_config    (int timer_id);
-void     set_gptimer_pulse_hi  (int timer_id);
+void     set_gptimer_pwidth(int timer_id, uint32_t width);
+uint32_t get_gptimer_pwidth(int timer_id);
+void     set_gptimer_period(int timer_id, uint32_t period);
+uint32_t get_gptimer_period(int timer_id);
+uint32_t get_gptimer_count(int timer_id);
+int      get_gptimer_intr(int timer_id);
+void     clear_gptimer_intr(int timer_id);
+int      get_gptimer_over(int timer_id);
+void     clear_gptimer_over(int timer_id);
+void     set_gptimer_config(int timer_id, uint16_t config);
+uint16_t get_gptimer_config(int timer_id);
+int      get_gptimer_run(int timer_id);
+void     set_gptimer_pulse_hi(int timer_id);
 void     clear_gptimer_pulse_hi(int timer_id);
-void     enable_gptimers       (uint16_t mask);
-void     disable_gptimers      (uint16_t mask);
-uint16_t get_enabled_gptimers  (void);
-uint32_t get_gptimer_status    (int group);
-void     set_gptimer_status    (int group, uint32_t value);
+void     enable_gptimers(uint16_t mask);
+void     disable_gptimers(uint16_t mask);
+void     disable_gptimers_sync(uint16_t mask);
+uint16_t get_enabled_gptimers(void);
+uint32_t get_gptimer_status(int group);
+void     set_gptimer_status(int group, uint32_t value);
 
 #endif

arch/blackfin/include/asm/io.h

@@ -80,19 +80,22 @@ static inline unsigned int readl(const volatile void __iomem *addr)
 #define memcpy_fromio(a,b,c)	memcpy((a),(void *)(b),(c))
 #define memcpy_toio(a,b,c)	memcpy((void *)(a),(b),(c))
 
-#define inb(addr)    readb(addr)
-#define inw(addr)    readw(addr)
-#define inl(addr)    readl(addr)
-#define outb(x,addr) ((void) writeb(x,addr))
-#define outw(x,addr) ((void) writew(x,addr))
-#define outl(x,addr) ((void) writel(x,addr))
-
-#define inb_p(addr)    inb(addr)
-#define inw_p(addr)    inw(addr)
-#define inl_p(addr)    inl(addr)
-#define outb_p(x,addr) outb(x,addr)
-#define outw_p(x,addr) outw(x,addr)
-#define outl_p(x,addr) outl(x,addr)
+/* Convert "I/O port addresses" to actual addresses.  i.e. ugly casts. */
+#define __io(port) ((void *)(unsigned long)(port))
+
+#define inb(port)    readb(__io(port))
+#define inw(port)    readw(__io(port))
+#define inl(port)    readl(__io(port))
+#define outb(x,port) writeb(x,__io(port))
+#define outw(x,port) writew(x,__io(port))
+#define outl(x,port) writel(x,__io(port))
+
+#define inb_p(port)    inb(__io(port))
+#define inw_p(port)    inw(__io(port))
+#define inl_p(port)    inl(__io(port))
+#define outb_p(x,port) outb(x,__io(port))
+#define outw_p(x,port) outw(x,__io(port))
+#define outl_p(x,port) outl(x,__io(port))
 
 #define ioread8_rep(a,d,c)	readsb(a,d,c)
 #define ioread16_rep(a,d,c)	readsw(a,d,c)

arch/blackfin/include/asm/ipipe.h

@@ -35,10 +35,10 @@
 #include <asm/atomic.h>
 #include <asm/traps.h>
 
-#define IPIPE_ARCH_STRING     "1.9-00"
+#define IPIPE_ARCH_STRING     "1.9-01"
 #define IPIPE_MAJOR_NUMBER    1
 #define IPIPE_MINOR_NUMBER    9
-#define IPIPE_PATCH_NUMBER    0
+#define IPIPE_PATCH_NUMBER    1
 
 #ifdef CONFIG_SMP
 #error "I-pipe/blackfin: SMP not implemented"

arch/blackfin/include/asm/pda.h

@@ -64,8 +64,6 @@ struct blackfin_pda {			/* Per-processor Data Area */
 
 extern struct blackfin_pda cpu_pda[];
 
-void reserve_pda(void);
-
 #endif	/* __ASSEMBLY__ */
 
 #endif /* _ASM_BLACKFIN_PDA_H */

arch/blackfin/include/asm/processor.h

@@ -131,8 +131,8 @@ unsigned long get_wchan(struct task_struct *p);
 /* Get the Silicon Revision of the chip */
 static inline uint32_t __pure bfin_revid(void)
 {
-	/* stored in the upper 4 bits */
-	uint32_t revid = bfin_read_CHIPID() >> 28;
+	/* Always use CHIPID, to work around ANOMALY_05000234 */
+	uint32_t revid = (bfin_read_CHIPID() & CHIPID_VERSION) >> 28;
 
 #ifdef CONFIG_BF52x
 	/* ANOMALY_05000357

arch/blackfin/include/asm/time.h

@@ -37,4 +37,5 @@ extern unsigned long long __bfin_cycles_off;
 extern unsigned int __bfin_cycles_mod;
 #endif
 
+extern void __init setup_core_timer(void);
 #endif

arch/blackfin/include/asm/uaccess.h

@@ -59,12 +59,8 @@ static inline int is_in_rom(unsigned long addr)
 #ifndef CONFIG_ACCESS_CHECK
 static inline int _access_ok(unsigned long addr, unsigned long size) { return 1; }
 #else
-#ifdef CONFIG_ACCESS_OK_L1
-extern int _access_ok(unsigned long addr, unsigned long size)__attribute__((l1_text));
-#else
 extern int _access_ok(unsigned long addr, unsigned long size);
 #endif
-#endif
 
 /*
  * The exception table consists of pairs of addresses: the first is the
@@ -83,9 +79,6 @@ struct exception_table_entry {
 	unsigned long insn, fixup;
 };
 
-/* Returns 0 if exception not found and fixup otherwise.  */
-extern unsigned long search_exception_table(unsigned long);
-
 /*
  * These are the main single-value transfer routines.  They automatically
  * use the right size if we just have the right pointer type.
@@ -233,16 +226,29 @@ strncpy_from_user(char *dst, const char *src, long count)
 }
 
 /*
- * Return the size of a string (including the ending 0)
+ * Get the size of a string in user space.
+ *   src: The string to measure
+ *     n: The maximum valid length
  *
- * Return 0 on exception, a value greater than N if too long
+ * Get the size of a NUL-terminated string in user space.
+ *
+ * Returns the size of the string INCLUDING the terminating NUL.
+ * On exception, returns 0.
+ * If the string is too long, returns a value greater than n.
  */
-static inline long strnlen_user(const char *src, long n)
+static inline long __must_check strnlen_user(const char *src, long n)
 {
-	return (strlen(src) + 1);
+	if (!access_ok(VERIFY_READ, src, 1))
+		return 0;
+	return strnlen(src, n) + 1;
 }
 
-#define strlen_user(str) strnlen_user(str, 32767)
+static inline long __must_check strlen_user(const char *src)
+{
+	if (!access_ok(VERIFY_READ, src, 1))
+		return 0;
+	return strlen(src) + 1;
+}
 
 /*
  * Zero Userspace
@@ -251,6 +257,8 @@ static inline long strnlen_user(const char *src, long n)
 static inline unsigned long __must_check
 __clear_user(void *to, unsigned long n)
 {
+	if (!access_ok(VERIFY_WRITE, to, n))
+		return n;
 	memset(to, 0, n);
 	return 0;
 }

arch/blackfin/kernel/bfin_dma_5xx.c

@@ -20,6 +20,11 @@
 #include <asm/dma.h>
 #include <asm/uaccess.h>
 
+/*
+ * To make sure we work around 05000119 - we always check DMA_DONE bit,
+ * never the DMA_RUN bit
+ */
+
 struct dma_channel dma_ch[MAX_DMA_CHANNELS];
 EXPORT_SYMBOL(dma_ch);
 
@@ -232,6 +237,87 @@ void blackfin_dma_resume(void)
 void __init blackfin_dma_early_init(void)
 {
 	bfin_write_MDMA_S0_CONFIG(0);
+	bfin_write_MDMA_S1_CONFIG(0);
+}
+
+void __init early_dma_memcpy(void *pdst, const void *psrc, size_t size)
+{
+	unsigned long dst = (unsigned long)pdst;
+	unsigned long src = (unsigned long)psrc;
+	struct dma_register *dst_ch, *src_ch;
+
+	/* We assume that everything is 4 byte aligned, so include
+	 * a basic sanity check
+	 */
+	BUG_ON(dst % 4);
+	BUG_ON(src % 4);
+	BUG_ON(size % 4);
+
+	/* Force a sync in case a previous config reset on this channel
+	 * occurred.  This is needed so subsequent writes to DMA registers
+	 * are not spuriously lost/corrupted.
+	 */
+	__builtin_bfin_ssync();
+
+	src_ch = 0;
+	/* Find an avalible memDMA channel */
+	while (1) {
+		if (!src_ch || src_ch == (struct dma_register *)MDMA_S1_NEXT_DESC_PTR) {
+			dst_ch = (struct dma_register *)MDMA_D0_NEXT_DESC_PTR;
+			src_ch = (struct dma_register *)MDMA_S0_NEXT_DESC_PTR;
+		} else {
+			dst_ch = (struct dma_register *)MDMA_D1_NEXT_DESC_PTR;
+			src_ch = (struct dma_register *)MDMA_S1_NEXT_DESC_PTR;
+		}
+
+		if (!bfin_read16(&src_ch->cfg)) {
+			break;
+		} else {
+			if (bfin_read16(&src_ch->irq_status) & DMA_DONE)
+				bfin_write16(&src_ch->cfg, 0);
+		}
+
+	}
+
+	/* Destination */
+	bfin_write32(&dst_ch->start_addr, dst);
+	bfin_write16(&dst_ch->x_count, size >> 2);
+	bfin_write16(&dst_ch->x_modify, 1 << 2);
+	bfin_write16(&dst_ch->irq_status, DMA_DONE | DMA_ERR);
+
+	/* Source */
+	bfin_write32(&src_ch->start_addr, src);
+	bfin_write16(&src_ch->x_count, size >> 2);
+	bfin_write16(&src_ch->x_modify, 1 << 2);
+	bfin_write16(&src_ch->irq_status, DMA_DONE | DMA_ERR);
+
+	/* Enable */
+	bfin_write16(&src_ch->cfg, DMAEN | WDSIZE_32);
+	bfin_write16(&dst_ch->cfg, WNR | DI_EN | DMAEN | WDSIZE_32);
+
+	/* Since we are atomic now, don't use the workaround ssync */
+	__builtin_bfin_ssync();
+}
+
+void __init early_dma_memcpy_done(void)
+{
+	while ((bfin_read_MDMA_S0_CONFIG() && !(bfin_read_MDMA_D0_IRQ_STATUS() & DMA_DONE)) ||
+	       (bfin_read_MDMA_S1_CONFIG() && !(bfin_read_MDMA_D1_IRQ_STATUS() & DMA_DONE)))
+		continue;
+
+	bfin_write_MDMA_D0_IRQ_STATUS(DMA_DONE | DMA_ERR);
+	bfin_write_MDMA_D1_IRQ_STATUS(DMA_DONE | DMA_ERR);
+	/*
+	 * Now that DMA is done, we would normally flush cache, but
+	 * i/d cache isn't running this early, so we don't bother,
+	 * and just clear out the DMA channel for next time
+	 */
+	bfin_write_MDMA_S0_CONFIG(0);
+	bfin_write_MDMA_S1_CONFIG(0);
+	bfin_write_MDMA_D0_CONFIG(0);
+	bfin_write_MDMA_D1_CONFIG(0);
+
+	__builtin_bfin_ssync();
 }
 
 /**

arch/blackfin/kernel/bfin_gpio.c

@@ -313,15 +313,6 @@ inline void portmux_setup(unsigned short per)
 # define portmux_setup(...)  do { } while (0)
 #endif
 
-static int __init bfin_gpio_init(void)
-{
-	printk(KERN_INFO "Blackfin GPIO Controller\n");
-
-	return 0;
-}
-arch_initcall(bfin_gpio_init);
-
-
 #ifndef CONFIG_BF54x
 /***********************************************************
 *
@@ -1021,15 +1012,6 @@ int bfin_gpio_irq_request(unsigned gpio, const char *label)
 
 	local_irq_save_hw(flags);
 
-	if (unlikely(reserved_gpio_irq_map[gpio_bank(gpio)] & gpio_bit(gpio))) {
-		if (system_state == SYSTEM_BOOTING)
-			dump_stack();
-		printk(KERN_ERR
-		       "bfin-gpio: GPIO %d is already reserved as gpio-irq !\n",
-		       gpio);
-		local_irq_restore_hw(flags);
-		return -EBUSY;
-	}
 	if (unlikely(reserved_peri_map[gpio_bank(gpio)] & gpio_bit(gpio))) {
 		if (system_state == SYSTEM_BOOTING)
 			dump_stack();

arch/blackfin/kernel/bfin_ksyms.c

@@ -16,7 +16,6 @@ EXPORT_SYMBOL(bfin_return_from_exception);
 
 /* All the Blackfin cache functions: mach-common/cache.S */
 EXPORT_SYMBOL(blackfin_dcache_invalidate_range);
-EXPORT_SYMBOL(blackfin_icache_dcache_flush_range);
 EXPORT_SYMBOL(blackfin_icache_flush_range);
 EXPORT_SYMBOL(blackfin_dcache_flush_range);
 EXPORT_SYMBOL(blackfin_dflush_page);

arch/blackfin/kernel/cplb-mpu/cacheinit.c

@@ -55,7 +55,14 @@ void __cpuinit bfin_dcache_init(struct cplb_entry *dcplb_tbl)
 	}
 
 	ctrl = bfin_read_DMEM_CONTROL();
-	ctrl |= DMEM_CNTR;
+
+	/*
+	 *  Anomaly notes:
+	 *  05000287 - We implement workaround #2 - Change the DMEM_CONTROL
+	 *  register, so that the port preferences for DAG0 and DAG1 are set
+	 *  to port B
+	 */
+	ctrl |= DMEM_CNTR | PORT_PREF0 | (ANOMALY_05000287 ? PORT_PREF1 : 0);
 	bfin_write_DMEM_CONTROL(ctrl);
 	SSYNC();
 }

arch/blackfin/kernel/cplb-mpu/cplbinit.c

@@ -64,7 +64,7 @@ void __init generate_cplb_tables_cpu(unsigned int cpu)
 	dcplb_tbl[cpu][i_d++].data = SDRAM_OOPS | PAGE_SIZE_1KB;
 
 	icplb_tbl[cpu][i_i].addr = 0;
-	icplb_tbl[cpu][i_i++].data = i_cache | CPLB_USER_RD | PAGE_SIZE_1KB;
+	icplb_tbl[cpu][i_i++].data = CPLB_VALID | i_cache | CPLB_USER_RD | PAGE_SIZE_1KB;
 
 	/* Cover kernel memory with 4M pages.  */
 	addr = 0;

arch/blackfin/kernel/cplb-nompu/cacheinit.c

@@ -55,7 +55,14 @@ void __cpuinit bfin_dcache_init(struct cplb_entry *dcplb_tbl)
 	}
 
 	ctrl = bfin_read_DMEM_CONTROL();
-	ctrl |= DMEM_CNTR;
+
+	/*
+	 *  Anomaly notes:
+	 *  05000287 - We implement workaround #2 - Change the DMEM_CONTROL
+	 *  register, so that the port preferences for DAG0 and DAG1 are set
+	 *  to port B
+	 */
+	ctrl |= DMEM_CNTR | PORT_PREF0 | (ANOMALY_05000287 ? PORT_PREF1 : 0);
 	bfin_write_DMEM_CONTROL(ctrl);
 	SSYNC();
 }

arch/blackfin/kernel/early_printk.c

@@ -178,25 +178,15 @@ int __init setup_early_printk(char *buf)
 
 asmlinkage void __init init_early_exception_vectors(void)
 {
+	u32 evt;
 	SSYNC();
 
 	/* cannot program in software:
 	 * evt0 - emulation (jtag)
 	 * evt1 - reset
 	 */
-	bfin_write_EVT2(early_trap);
-	bfin_write_EVT3(early_trap);
-	bfin_write_EVT5(early_trap);
-	bfin_write_EVT6(early_trap);
-	bfin_write_EVT7(early_trap);
-	bfin_write_EVT8(early_trap);
-	bfin_write_EVT9(early_trap);
-	bfin_write_EVT10(early_trap);
-	bfin_write_EVT11(early_trap);
-	bfin_write_EVT12(early_trap);
-	bfin_write_EVT13(early_trap);
-	bfin_write_EVT14(early_trap);
-	bfin_write_EVT15(early_trap);
+	for (evt = EVT2; evt <= EVT15; evt += 4)
+		bfin_write32(evt, early_trap);
 	CSYNC();
 
 	/* Set all the return from interrupt, exception, NMI to a known place

arch/blackfin/kernel/gptimers.c

@@ -189,10 +189,10 @@ void set_gptimer_status(int group, uint32_t value)
 }
 EXPORT_SYMBOL(set_gptimer_status);
 
-uint16_t get_gptimer_intr(int timer_id)
+int get_gptimer_intr(int timer_id)
 {
 	tassert(timer_id < MAX_BLACKFIN_GPTIMERS);
-	return (group_regs[BFIN_TIMER_OCTET(timer_id)]->status & timil_mask[timer_id]) ? 1 : 0;
+	return !!(group_regs[BFIN_TIMER_OCTET(timer_id)]->status & timil_mask[timer_id]);
 }
 EXPORT_SYMBOL(get_gptimer_intr);
 
@@ -203,10 +203,10 @@ void clear_gptimer_intr(int timer_id)
 }
 EXPORT_SYMBOL(clear_gptimer_intr);
 
-uint16_t get_gptimer_over(int timer_id)
+int get_gptimer_over(int timer_id)
 {
 	tassert(timer_id < MAX_BLACKFIN_GPTIMERS);
-	return (group_regs[BFIN_TIMER_OCTET(timer_id)]->status & tovf_mask[timer_id]) ? 1 : 0;
+	return !!(group_regs[BFIN_TIMER_OCTET(timer_id)]->status & tovf_mask[timer_id]);
 }
 EXPORT_SYMBOL(get_gptimer_over);
 
@@ -217,6 +217,13 @@ void clear_gptimer_over(int timer_id)
 }
 EXPORT_SYMBOL(clear_gptimer_over);
 
+int get_gptimer_run(int timer_id)
+{
+	tassert(timer_id < MAX_BLACKFIN_GPTIMERS);
+	return !!(group_regs[BFIN_TIMER_OCTET(timer_id)]->status & trun_mask[timer_id]);
+}
+EXPORT_SYMBOL(get_gptimer_run);
+
 void set_gptimer_config(int timer_id, uint16_t config)
 {
 	tassert(timer_id < MAX_BLACKFIN_GPTIMERS);
@@ -244,7 +251,7 @@ void enable_gptimers(uint16_t mask)
 }
 EXPORT_SYMBOL(enable_gptimers);
 
-void disable_gptimers(uint16_t mask)
+static void _disable_gptimers(uint16_t mask)
 {
 	int i;
 	uint16_t m = mask;
@@ -253,6 +260,12 @@ void disable_gptimers(uint16_t mask)
 		group_regs[i]->disable = m & 0xFF;
 		m >>= 8;
 	}
+}
+
+void disable_gptimers(uint16_t mask)
+{
+	int i;
+	_disable_gptimers(mask);
 	for (i = 0; i < MAX_BLACKFIN_GPTIMERS; ++i)
 		if (mask & (1 << i))
 			group_regs[BFIN_TIMER_OCTET(i)]->status |= trun_mask[i];
@@ -260,6 +273,13 @@ void disable_gptimers(uint16_t mask)
 }
 EXPORT_SYMBOL(disable_gptimers);
 
+void disable_gptimers_sync(uint16_t mask)
+{
+	_disable_gptimers(mask);
+	SSYNC();
+}
+EXPORT_SYMBOL(disable_gptimers_sync);
+
 void set_gptimer_pulse_hi(int timer_id)
 {
 	tassert(timer_id < MAX_BLACKFIN_GPTIMERS);

arch/blackfin/kernel/ipipe.c

@@ -167,7 +167,7 @@ int __ipipe_check_root(void)
 void __ipipe_enable_irqdesc(struct ipipe_domain *ipd, unsigned irq)
 {
 	struct irq_desc *desc = irq_to_desc(irq);
-	int prio = desc->ic_prio;
+	int prio = __ipipe_get_irq_priority(irq);
 
 	desc->depth = 0;
 	if (ipd != &ipipe_root &&
@@ -178,8 +178,7 @@ EXPORT_SYMBOL(__ipipe_enable_irqdesc);
 
 void __ipipe_disable_irqdesc(struct ipipe_domain *ipd, unsigned irq)
 {
-	struct irq_desc *desc = irq_to_desc(irq);
-	int prio = desc->ic_prio;
+	int prio = __ipipe_get_irq_priority(irq);
 
 	if (ipd != &ipipe_root &&
 	    atomic_dec_and_test(&__ipipe_irq_lvdepth[prio]))
@@ -310,12 +309,16 @@ int ipipe_trigger_irq(unsigned irq)
 
 asmlinkage void __ipipe_sync_root(void)
 {
+	void (*irq_tail_hook)(void) = (void (*)(void))__ipipe_irq_tail_hook;
 	unsigned long flags;
 
 	BUG_ON(irqs_disabled());
 
 	local_irq_save_hw(flags);
 
+	if (irq_tail_hook)
+		irq_tail_hook();
+
 	clear_thread_flag(TIF_IRQ_SYNC);
 
 	if (ipipe_root_cpudom_var(irqpend_himask) != 0)

arch/blackfin/kernel/irqchip.c

@@ -59,12 +59,14 @@ static struct irq_chip bad_chip = {
 	.unmask = dummy_mask_unmask_irq,
 };
 
+static int bad_stats;
 static struct irq_desc bad_irq_desc = {
 	.status = IRQ_DISABLED,
 	.chip = &bad_chip,
 	.handle_irq = handle_bad_irq,
 	.depth = 1,
 	.lock = __SPIN_LOCK_UNLOCKED(irq_desc->lock),
+	.kstat_irqs = &bad_stats,
 #ifdef CONFIG_SMP
 	.affinity = CPU_MASK_ALL
 #endif

arch/blackfin/kernel/kgdb.c

@@ -466,7 +466,7 @@ static int validate_memory_access_address(unsigned long addr, int size)
 	int cpu = raw_smp_processor_id();
 
 	if (size < 0)
-		return EFAULT;
+		return -EFAULT;
 	if (addr >= 0x1000 && (addr + size) <= physical_mem_end)
 		return 0;
 	if (addr >= SYSMMR_BASE)
@@ -498,7 +498,7 @@ static int validate_memory_access_address(unsigned long addr, int size)
 	if (IN_MEM(addr, size, L2_START, L2_LENGTH))
 		return 0;
 
-	return EFAULT;
+	return -EFAULT;
 }
 
 /*
@@ -508,14 +508,15 @@ static int validate_memory_access_address(unsigned long addr, int size)
 int kgdb_mem2hex(char *mem, char *buf, int count)
 {
 	char *tmp;
-	int err = 0;
+	int err;
 	unsigned char *pch;
 	unsigned short mmr16;
 	unsigned long mmr32;
 	int cpu = raw_smp_processor_id();
 
-	if (validate_memory_access_address((unsigned long)mem, count))
-		return EFAULT;
+	err = validate_memory_access_address((unsigned long)mem, count);
+	if (err)
+		return err;
 
 	/*
 	 * We use the upper half of buf as an intermediate buffer for the
@@ -533,7 +534,7 @@ int kgdb_mem2hex(char *mem, char *buf, int count)
 				*tmp++ = *pch++;
 				tmp -= 2;
 			} else
-				err = EFAULT;
+				err = -EFAULT;
 			break;
 		case 4:
 			if ((unsigned int)mem % 4 == 0) {
@@ -545,10 +546,10 @@ int kgdb_mem2hex(char *mem, char *buf, int count)
 				*tmp++ = *pch++;
 				tmp -= 4;
 			} else
-				err = EFAULT;
+				err = -EFAULT;
 			break;
 		default:
-			err = EFAULT;
+			err = -EFAULT;
 		}
 	} else if ((cpu == 0 && IN_MEM(mem, count, L1_CODE_START, L1_CODE_LENGTH))
 #ifdef CONFIG_SMP
@@ -557,7 +558,7 @@ int kgdb_mem2hex(char *mem, char *buf, int count)
 		) {
 		/* access L1 instruction SRAM*/
 		if (dma_memcpy(tmp, mem, count) == NULL)
-			err = EFAULT;
+			err = -EFAULT;
 	} else
 		err = probe_kernel_read(tmp, mem, count);
 
@@ -585,24 +586,24 @@ int kgdb_ebin2mem(char *buf, char *mem, int count)
 	char *tmp_new;
 	unsigned short *mmr16;
 	unsigned long *mmr32;
-	int err = 0;
-	int size = 0;
+	int err;
+	int size;
 	int cpu = raw_smp_processor_id();
 
 	tmp_old = tmp_new = buf;
 
-	while (count-- > 0) {
+	for (size = 0; size < count; ++size) {
 		if (*tmp_old == 0x7d)
 			*tmp_new = *(++tmp_old) ^ 0x20;
 		else
 			*tmp_new = *tmp_old;
 		tmp_new++;
 		tmp_old++;
-		size++;
 	}
 
-	if (validate_memory_access_address((unsigned long)mem, size))
-		return EFAULT;
+	err = validate_memory_access_address((unsigned long)mem, size);
+	if (err)
+		return err;
 
 	if ((unsigned int)mem >= SYSMMR_BASE) { /*access MMR registers*/
 		switch (size) {
@@ -611,17 +612,17 @@ int kgdb_ebin2mem(char *buf, char *mem, int count)
 				mmr16 = (unsigned short *)buf;
 				*(unsigned short *)mem = *mmr16;
 			} else
-				return EFAULT;
+				err = -EFAULT;
 			break;
 		case 4:
 			if ((unsigned int)mem % 4 == 0) {
 				mmr32 = (unsigned long *)buf;
 				*(unsigned long *)mem = *mmr32;
 			} else
-				return EFAULT;
+				err = -EFAULT;
 			break;
 		default:
-			return EFAULT;
+			err = -EFAULT;
 		}
 	} else if ((cpu == 0 && IN_MEM(mem, count, L1_CODE_START, L1_CODE_LENGTH))
 #ifdef CONFIG_SMP
@@ -630,7 +631,7 @@ int kgdb_ebin2mem(char *buf, char *mem, int count)
 		) {
 		/* access L1 instruction SRAM */
 		if (dma_memcpy(mem, buf, size) == NULL)
-			err = EFAULT;
+			err = -EFAULT;
 	} else
 		err = probe_kernel_write(mem, buf, size);
 
@@ -648,10 +649,12 @@ int kgdb_hex2mem(char *buf, char *mem, int count)
 	char *tmp_hex;
 	unsigned short *mmr16;
 	unsigned long *mmr32;
+	int err;
 	int cpu = raw_smp_processor_id();
 
-	if (validate_memory_access_address((unsigned long)mem, count))
-		return EFAULT;
+	err = validate_memory_access_address((unsigned long)mem, count);
+	if (err)
+		return err;
 
 	/*
 	 * We use the upper half of buf as an intermediate buffer for the
@@ -673,17 +676,17 @@ int kgdb_hex2mem(char *buf, char *mem, int count)
 				mmr16 = (unsigned short *)tmp_raw;
 				*(unsigned short *)mem = *mmr16;
 			} else
-				return EFAULT;
+				err = -EFAULT;
 			break;
 		case 4:
 			if ((unsigned int)mem % 4 == 0) {
 				mmr32 = (unsigned long *)tmp_raw;
 				*(unsigned long *)mem = *mmr32;
 			} else
-				return EFAULT;
+				err = -EFAULT;
 			break;
 		default:
-			return EFAULT;
+			err = -EFAULT;
 		}
 	} else if ((cpu == 0 && IN_MEM(mem, count, L1_CODE_START, L1_CODE_LENGTH))
 #ifdef CONFIG_SMP
@@ -692,10 +695,11 @@ int kgdb_hex2mem(char *buf, char *mem, int count)
 		) {
 		/* access L1 instruction SRAM */
 		if (dma_memcpy(mem, tmp_raw, count) == NULL)
-			return EFAULT;
+			err = -EFAULT;
 	} else
-		return probe_kernel_write(mem, tmp_raw, count);
-	return 0;
+		err = probe_kernel_write(mem, tmp_raw, count);
+
+	return err;
 }
 
 int kgdb_validate_break_address(unsigned long addr)
@@ -715,7 +719,7 @@ int kgdb_validate_break_address(unsigned long addr)
 	if (IN_MEM(addr, BREAK_INSTR_SIZE, L2_START, L2_LENGTH))
 		return 0;
 
-	return EFAULT;
+	return -EFAULT;
 }
 
 int kgdb_arch_set_breakpoint(unsigned long addr, char *saved_instr)

arch/blackfin/kernel/module.c

@@ -201,8 +201,8 @@ apply_relocate(Elf_Shdr * sechdrs, const char *strtab,
 /*            Arithmetic relocations are handled.                        */
 /*            We do not expect LSETUP to be split and hence is not       */
 /*            handled.                                                   */
-/*            R_byte and R_byte2 are also not handled as the gas         */
-/*            does not generate it.                                      */
+/*            R_BFIN_BYTE and R_BFIN_BYTE2 are also not handled as the   */
+/*            gas does not generate it.                                  */
 /*************************************************************************/
 int
 apply_relocate_add(Elf_Shdr * sechdrs, const char *strtab,
@@ -243,8 +243,8 @@ apply_relocate_add(Elf_Shdr * sechdrs, const char *strtab,
 #endif
 		switch (ELF32_R_TYPE(rel[i].r_info)) {
 
-		case R_pcrel24:
-		case R_pcrel24_jump_l:
+		case R_BFIN_PCREL24:
+		case R_BFIN_PCREL24_JUMP_L:
 			/* Add the value, subtract its postition */
 			location16 =
 			    (uint16_t *) (sechdrs[sechdrs[relsec].sh_info].
@@ -266,18 +266,18 @@ apply_relocate_add(Elf_Shdr * sechdrs, const char *strtab,
 			    (*location16 & 0xff00) | (value >> 16 & 0x00ff);
 			*(location16 + 1) = value & 0xffff;
 			break;
-		case R_pcrel12_jump:
-		case R_pcrel12_jump_s:
+		case R_BFIN_PCREL12_JUMP:
+		case R_BFIN_PCREL12_JUMP_S:
 			value -= (uint32_t) location32;
 			value >>= 1;
 			*location16 = (value & 0xfff);
 			break;
-		case R_pcrel10:
+		case R_BFIN_PCREL10:
 			value -= (uint32_t) location32;
 			value >>= 1;
 			*location16 = (value & 0x3ff);
 			break;
-		case R_luimm16:
+		case R_BFIN_LUIMM16:
 			pr_debug("before %x after %x\n", *location16,
 				       (value & 0xffff));
 			tmp = (value & 0xffff);
@@ -286,7 +286,7 @@ apply_relocate_add(Elf_Shdr * sechdrs, const char *strtab,
 			} else
 				*location16 = tmp;
 			break;
-		case R_huimm16:
+		case R_BFIN_HUIMM16:
 			pr_debug("before %x after %x\n", *location16,
 				       ((value >> 16) & 0xffff));
 			tmp = ((value >> 16) & 0xffff);
@@ -295,10 +295,10 @@ apply_relocate_add(Elf_Shdr * sechdrs, const char *strtab,
 			} else
 				*location16 = tmp;
 			break;
-		case R_rimm16:
+		case R_BFIN_RIMM16:
 			*location16 = (value & 0xffff);
 			break;
-		case R_byte4_data:
+		case R_BFIN_BYTE4_DATA:
 			pr_debug("before %x after %x\n", *location32, value);
 			*location32 = value;
 			break;

arch/blackfin/kernel/process.c

@@ -322,6 +322,9 @@ void finish_atomic_sections (struct pt_regs *regs)
 }
 
 #if defined(CONFIG_ACCESS_CHECK)
+#ifdef CONFIG_ACCESS_OK_L1
+__attribute__((l1_text))
+#endif
 /* Return 1 if access to memory range is OK, 0 otherwise */
 int _access_ok(unsigned long addr, unsigned long size)
 {

arch/blackfin/kernel/setup.c

@@ -18,9 +18,12 @@
 #include <linux/tty.h>
 #include <linux/pfn.h>
 
+#ifdef CONFIG_MTD_UCLINUX
+#include <linux/mtd/map.h>
 #include <linux/ext2_fs.h>
 #include <linux/cramfs_fs.h>
 #include <linux/romfs_fs.h>
+#endif
 
 #include <asm/cplb.h>
 #include <asm/cacheflush.h>
@@ -45,6 +48,7 @@ EXPORT_SYMBOL(_ramend);
 EXPORT_SYMBOL(reserved_mem_dcache_on);
 
 #ifdef CONFIG_MTD_UCLINUX
+extern struct map_info uclinux_ram_map;
 unsigned long memory_mtd_end, memory_mtd_start, mtd_size;
 unsigned long _ebss;
 EXPORT_SYMBOL(memory_mtd_end);
@@ -150,40 +154,45 @@ void __init bfin_relocate_l1_mem(void)
 	unsigned long l1_data_b_length;
 	unsigned long l2_length;
 
+	/*
+	 * due to the ALIGN(4) in the arch/blackfin/kernel/vmlinux.lds.S
+	 * we know that everything about l1 text/data is nice and aligned,
+	 * so copy by 4 byte chunks, and don't worry about overlapping
+	 * src/dest.
+	 *
+	 * We can't use the dma_memcpy functions, since they can call
+	 * scheduler functions which might be in L1 :( and core writes
+	 * into L1 instruction cause bad access errors, so we are stuck,
+	 * we are required to use DMA, but can't use the common dma
+	 * functions. We can't use memcpy either - since that might be
+	 * going to be in the relocated L1
+	 */
+
 	blackfin_dma_early_init();
 
+	/* if necessary, copy _stext_l1 to _etext_l1 to L1 instruction SRAM */
 	l1_code_length = _etext_l1 - _stext_l1;
-	if (l1_code_length > L1_CODE_LENGTH)
-		panic("L1 Instruction SRAM Overflow\n");
-	/* cannot complain as printk is not available as yet.
-	 * But we can continue booting and complain later!
-	 */
-
-	/* Copy _stext_l1 to _etext_l1 to L1 instruction SRAM */
-	dma_memcpy(_stext_l1, _l1_lma_start, l1_code_length);
+	if (l1_code_length)
+		early_dma_memcpy(_stext_l1, _l1_lma_start, l1_code_length);
 
+	/* if necessary, copy _sdata_l1 to _sbss_l1 to L1 data bank A SRAM */
 	l1_data_a_length = _sbss_l1 - _sdata_l1;
-	if (l1_data_a_length > L1_DATA_A_LENGTH)
-		panic("L1 Data SRAM Bank A Overflow\n");
-
-	/* Copy _sdata_l1 to _sbss_l1 to L1 data bank A SRAM */
-	dma_memcpy(_sdata_l1, _l1_lma_start + l1_code_length, l1_data_a_length);
+	if (l1_data_a_length)
+		early_dma_memcpy(_sdata_l1, _l1_lma_start + l1_code_length, l1_data_a_length);
 
+	/* if necessary, copy _sdata_b_l1 to _sbss_b_l1 to L1 data bank B SRAM */
 	l1_data_b_length = _sbss_b_l1 - _sdata_b_l1;
-	if (l1_data_b_length > L1_DATA_B_LENGTH)
-		panic("L1 Data SRAM Bank B Overflow\n");
-
-	/* Copy _sdata_b_l1 to _sbss_b_l1 to L1 data bank B SRAM */
-	dma_memcpy(_sdata_b_l1, _l1_lma_start + l1_code_length +
+	if (l1_data_b_length)
+		early_dma_memcpy(_sdata_b_l1, _l1_lma_start + l1_code_length +
 			l1_data_a_length, l1_data_b_length);
 
+	early_dma_memcpy_done();
+
+	/* if necessary, copy _stext_l2 to _edata_l2 to L2 SRAM */
 	if (L2_LENGTH != 0) {
 		l2_length = _sbss_l2 - _stext_l2;
-		if (l2_length > L2_LENGTH)
-			panic("L2 SRAM Overflow\n");
-
-		/* Copy _stext_l2 to _edata_l2 to L2 SRAM */
-		dma_memcpy(_stext_l2, _l2_lma_start, l2_length);
+		if (l2_length)
+			memcpy(_stext_l2, _l2_lma_start, l2_length);
 	}
 }
 
@@ -472,7 +481,7 @@ static __init void memory_setup(void)
 
 	if (DMA_UNCACHED_REGION > (_ramend - _ramstart)) {
 		console_init();
-		panic("DMA region exceeds memory limit: %lu.\n",
+		panic("DMA region exceeds memory limit: %lu.",
 			_ramend - _ramstart);
 	}
 	memory_end = _ramend - DMA_UNCACHED_REGION;
@@ -526,14 +535,13 @@ static __init void memory_setup(void)
 
 	if (mtd_size == 0) {
 		console_init();
-		panic("Don't boot kernel without rootfs attached.\n");
+		panic("Don't boot kernel without rootfs attached.");
 	}
 
 	/* Relocate MTD image to the top of memory after the uncached memory area */
-	dma_memcpy((char *)memory_end, _end, mtd_size);
-
-	memory_mtd_start = memory_end;
-	_ebss = memory_mtd_start;	/* define _ebss for compatible */
+	uclinux_ram_map.phys = memory_mtd_start = memory_end;
+	uclinux_ram_map.size = mtd_size;
+	dma_memcpy((void *)uclinux_ram_map.phys, _end, uclinux_ram_map.size);
 #endif				/* CONFIG_MTD_UCLINUX */
 
 #if (defined(CONFIG_BFIN_ICACHE) && ANOMALY_05000263)
@@ -796,10 +804,8 @@ void __init setup_arch(char **cmdline_p)
 	cclk = get_cclk();
 	sclk = get_sclk();
 
-#if !defined(CONFIG_BFIN_KERNEL_CLOCK)
-	if (ANOMALY_05000273 && cclk == sclk)
-		panic("ANOMALY 05000273, SCLK can not be same as CCLK");
-#endif
+	if ((ANOMALY_05000273 || ANOMALY_05000274) && (cclk >> 1) < sclk)
+		panic("ANOMALY 05000273 or 05000274: CCLK must be >= 2*SCLK");
 
 #ifdef BF561_FAMILY
 	if (ANOMALY_05000266) {
@@ -881,7 +887,7 @@ void __init setup_arch(char **cmdline_p)
 				printk(KERN_ERR "Warning: Compiled for Rev %d, but running on Rev %d\n",
 				       bfin_compiled_revid(), bfin_revid());
 				if (bfin_compiled_revid() > bfin_revid())
-					panic("Error: you are missing anomaly workarounds for this rev\n");
+					panic("Error: you are missing anomaly workarounds for this rev");
 			}
 		}
 		if (bfin_revid() < CONFIG_BF_REV_MIN || bfin_revid() > CONFIG_BF_REV_MAX)
@@ -891,16 +897,13 @@ void __init setup_arch(char **cmdline_p)
 
 	/* We can't run on BF548-0.1 due to ANOMALY 05000448 */
 	if (bfin_cpuid() == 0x27de && bfin_revid() == 1)
-		panic("You can't run on this processor due to 05000448\n");
+		panic("You can't run on this processor due to 05000448");
 
 	printk(KERN_INFO "Blackfin Linux support by http://blackfin.uclinux.org/\n");
 
 	printk(KERN_INFO "Processor Speed: %lu MHz core clock and %lu MHz System Clock\n",
 	       cclk / 1000000, sclk / 1000000);
 
-	if (ANOMALY_05000273 && (cclk >> 1) <= sclk)
-		printk("\n\n\nANOMALY_05000273: CCLK must be >= 2*SCLK !!!\n\n\n");
-
 	setup_bootmem_allocator();
 
 	paging_init();

arch/blackfin/kernel/sys_bfin.c

@@ -78,11 +78,6 @@ asmlinkage long sys_mmap2(unsigned long addr, unsigned long len,
 	return do_mmap2(addr, len, prot, flags, fd, pgoff);
 }
 
-asmlinkage int sys_getpagesize(void)
-{
-	return PAGE_SIZE;
-}
-
 asmlinkage void *sys_sram_alloc(size_t size, unsigned long flags)
 {
 	return sram_alloc_with_lsl(size, flags);

arch/blackfin/kernel/time-ts.c

@@ -20,8 +20,9 @@
 
 #include <asm/blackfin.h>
 #include <asm/time.h>
+#include <asm/gptimers.h>
 
-#ifdef CONFIG_CYCLES_CLOCKSOURCE
+#if defined(CONFIG_CYCLES_CLOCKSOURCE)
 
 /* Accelerators for sched_clock()
  * convert from cycles(64bits) => nanoseconds (64bits)
@@ -58,15 +59,15 @@ static inline unsigned long long cycles_2_ns(cycle_t cyc)
 	return (cyc * cyc2ns_scale) >> CYC2NS_SCALE_FACTOR;
 }
 
-static cycle_t read_cycles(struct clocksource *cs)
+static cycle_t bfin_read_cycles(struct clocksource *cs)
 {
 	return __bfin_cycles_off + (get_cycles() << __bfin_cycles_mod);
 }
 
-static struct clocksource clocksource_bfin = {
-	.name		= "bfin_cycles",
+static struct clocksource bfin_cs_cycles = {
+	.name		= "bfin_cs_cycles",
 	.rating		= 350,
-	.read		= read_cycles,
+	.read		= bfin_read_cycles,
 	.mask		= CLOCKSOURCE_MASK(64),
 	.shift		= 22,
 	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
@@ -74,53 +75,198 @@ static struct clocksource clocksource_bfin = {
 
 unsigned long long sched_clock(void)
 {
-	return cycles_2_ns(read_cycles(&clocksource_bfin));
+	return cycles_2_ns(bfin_read_cycles(&bfin_cs_cycles));
 }
 
-static int __init bfin_clocksource_init(void)
+static int __init bfin_cs_cycles_init(void)
 {
 	set_cyc2ns_scale(get_cclk() / 1000);
 
-	clocksource_bfin.mult = clocksource_hz2mult(get_cclk(), clocksource_bfin.shift);
+	bfin_cs_cycles.mult = \
+		clocksource_hz2mult(get_cclk(), bfin_cs_cycles.shift);
 
-	if (clocksource_register(&clocksource_bfin))
+	if (clocksource_register(&bfin_cs_cycles))
 		panic("failed to register clocksource");
 
 	return 0;
 }
+#else
+# define bfin_cs_cycles_init()
+#endif
+
+#ifdef CONFIG_GPTMR0_CLOCKSOURCE
+
+void __init setup_gptimer0(void)
+{
+	disable_gptimers(TIMER0bit);
+
+	set_gptimer_config(TIMER0_id, \
+		TIMER_OUT_DIS | TIMER_PERIOD_CNT | TIMER_MODE_PWM);
+	set_gptimer_period(TIMER0_id, -1);
+	set_gptimer_pwidth(TIMER0_id, -2);
+	SSYNC();
+	enable_gptimers(TIMER0bit);
+}
+
+static cycle_t bfin_read_gptimer0(void)
+{
+	return bfin_read_TIMER0_COUNTER();
+}
+
+static struct clocksource bfin_cs_gptimer0 = {
+	.name		= "bfin_cs_gptimer0",
+	.rating		= 400,
+	.read		= bfin_read_gptimer0,
+	.mask		= CLOCKSOURCE_MASK(32),
+	.shift		= 22,
+	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+static int __init bfin_cs_gptimer0_init(void)
+{
+	setup_gptimer0();
 
+	bfin_cs_gptimer0.mult = \
+		clocksource_hz2mult(get_sclk(), bfin_cs_gptimer0.shift);
+
+	if (clocksource_register(&bfin_cs_gptimer0))
+		panic("failed to register clocksource");
+
+	return 0;
+}
 #else
-# define bfin_clocksource_init()
+# define bfin_cs_gptimer0_init()
 #endif
 
+#ifdef CONFIG_CORE_TIMER_IRQ_L1
+__attribute__((l1_text))
+#endif
+irqreturn_t timer_interrupt(int irq, void *dev_id);
+
+static int bfin_timer_set_next_event(unsigned long, \
+		struct clock_event_device *);
+
+static void bfin_timer_set_mode(enum clock_event_mode, \
+		struct clock_event_device *);
+
+static struct clock_event_device clockevent_bfin = {
+#if defined(CONFIG_TICKSOURCE_GPTMR0)
+	.name		= "bfin_gptimer0",
+	.rating		= 300,
+	.irq		= IRQ_TIMER0,
+#else
+	.name		= "bfin_core_timer",
+	.rating		= 350,
+	.irq		= IRQ_CORETMR,
+#endif
+	.shift		= 32,
+	.features	= CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
+	.set_next_event = bfin_timer_set_next_event,
+	.set_mode	= bfin_timer_set_mode,
+};
+
+static struct irqaction bfin_timer_irq = {
+#if defined(CONFIG_TICKSOURCE_GPTMR0)
+	.name		= "Blackfin GPTimer0",
+#else
+	.name		= "Blackfin CoreTimer",
+#endif
+	.flags		= IRQF_DISABLED | IRQF_TIMER | \
+			  IRQF_IRQPOLL | IRQF_PERCPU,
+	.handler	= timer_interrupt,
+	.dev_id		= &clockevent_bfin,
+};
+
+#if defined(CONFIG_TICKSOURCE_GPTMR0)
 static int bfin_timer_set_next_event(unsigned long cycles,
                                      struct clock_event_device *evt)
 {
+	disable_gptimers(TIMER0bit);
+
+	/* it starts counting three SCLK cycles after the TIMENx bit is set */
+	set_gptimer_pwidth(TIMER0_id, cycles - 3);
+	enable_gptimers(TIMER0bit);
+	return 0;
+}
+
+static void bfin_timer_set_mode(enum clock_event_mode mode,
+				struct clock_event_device *evt)
+{
+	switch (mode) {
+	case CLOCK_EVT_MODE_PERIODIC: {
+		set_gptimer_config(TIMER0_id, \
+			TIMER_OUT_DIS | TIMER_IRQ_ENA | \
+			TIMER_PERIOD_CNT | TIMER_MODE_PWM);
+		set_gptimer_period(TIMER0_id, get_sclk() / HZ);
+		set_gptimer_pwidth(TIMER0_id, get_sclk() / HZ - 1);
+		enable_gptimers(TIMER0bit);
+		break;
+	}
+	case CLOCK_EVT_MODE_ONESHOT:
+		disable_gptimers(TIMER0bit);
+		set_gptimer_config(TIMER0_id, \
+			TIMER_OUT_DIS | TIMER_IRQ_ENA | TIMER_MODE_PWM);
+		set_gptimer_period(TIMER0_id, 0);
+		break;
+	case CLOCK_EVT_MODE_UNUSED:
+	case CLOCK_EVT_MODE_SHUTDOWN:
+		disable_gptimers(TIMER0bit);
+		break;
+	case CLOCK_EVT_MODE_RESUME:
+		break;
+	}
+}
+
+static void bfin_timer_ack(void)
+{
+	set_gptimer_status(TIMER_GROUP1, TIMER_STATUS_TIMIL0);
+}
+
+static void __init bfin_timer_init(void)
+{
+	disable_gptimers(TIMER0bit);
+}
+
+static unsigned long  __init bfin_clockevent_check(void)
+{
+	setup_irq(IRQ_TIMER0, &bfin_timer_irq);
+	return get_sclk();
+}
+
+#else /* CONFIG_TICKSOURCE_CORETMR */
+
+static int bfin_timer_set_next_event(unsigned long cycles,
+				struct clock_event_device *evt)
+{
+	bfin_write_TCNTL(TMPWR);
+	CSYNC();
 	bfin_write_TCOUNT(cycles);
 	CSYNC();
+	bfin_write_TCNTL(TMPWR | TMREN);
 	return 0;
 }
 
 static void bfin_timer_set_mode(enum clock_event_mode mode,
-                                struct clock_event_device *evt)
+				struct clock_event_device *evt)
 {
 	switch (mode) {
 	case CLOCK_EVT_MODE_PERIODIC: {
 		unsigned long tcount = ((get_cclk() / (HZ * TIME_SCALE)) - 1);
 		bfin_write_TCNTL(TMPWR);
-		bfin_write_TSCALE(TIME_SCALE - 1);
 		CSYNC();
+		bfin_write_TSCALE(TIME_SCALE - 1);
 		bfin_write_TPERIOD(tcount);
 		bfin_write_TCOUNT(tcount);
-		bfin_write_TCNTL(TMPWR | TMREN | TAUTORLD);
 		CSYNC();
+		bfin_write_TCNTL(TMPWR | TMREN | TAUTORLD);
 		break;
 	}
 	case CLOCK_EVT_MODE_ONESHOT:
+		bfin_write_TCNTL(TMPWR);
+		CSYNC();
 		bfin_write_TSCALE(TIME_SCALE - 1);
+		bfin_write_TPERIOD(0);
 		bfin_write_TCOUNT(0);
-		bfin_write_TCNTL(TMPWR | TMREN);
-		CSYNC();
 		break;
 	case CLOCK_EVT_MODE_UNUSED:
 	case CLOCK_EVT_MODE_SHUTDOWN:
@@ -132,6 +278,10 @@ static void bfin_timer_set_mode(enum clock_event_mode mode,
 	}
 }
 
+static void bfin_timer_ack(void)
+{
+}
+
 static void __init bfin_timer_init(void)
 {
 	/* power up the timer, but don't enable it just yet */
@@ -145,38 +295,32 @@ static void __init bfin_timer_init(void)
 	bfin_write_TPERIOD(0);
 	bfin_write_TCOUNT(0);
 
-	/* now enable the timer */
 	CSYNC();
 }
 
+static unsigned long  __init bfin_clockevent_check(void)
+{
+	setup_irq(IRQ_CORETMR, &bfin_timer_irq);
+	return get_cclk() / TIME_SCALE;
+}
+
+void __init setup_core_timer(void)
+{
+	bfin_timer_init();
+	bfin_timer_set_mode(CLOCK_EVT_MODE_PERIODIC, NULL);
+}
+#endif /* CONFIG_TICKSOURCE_GPTMR0 */
+
 /*
  * timer_interrupt() needs to keep up the real-time clock,
  * as well as call the "do_timer()" routine every clocktick
  */
-#ifdef CONFIG_CORE_TIMER_IRQ_L1
-__attribute__((l1_text))
-#endif
-irqreturn_t timer_interrupt(int irq, void *dev_id);
-
-static struct clock_event_device clockevent_bfin = {
-	.name		= "bfin_core_timer",
-	.features	= CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
-	.shift		= 32,
-	.set_next_event = bfin_timer_set_next_event,
-	.set_mode	= bfin_timer_set_mode,
-};
-
-static struct irqaction bfin_timer_irq = {
-	.name		= "Blackfin Core Timer",
-	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
-	.handler	= timer_interrupt,
-	.dev_id		= &clockevent_bfin,
-};
-
 irqreturn_t timer_interrupt(int irq, void *dev_id)
 {
 	struct clock_event_device *evt = dev_id;
+	smp_mb();
 	evt->event_handler(evt);
+	bfin_timer_ack();
 	return IRQ_HANDLED;
 }
 
@@ -184,9 +328,8 @@ static int __init bfin_clockevent_init(void)
 {
 	unsigned long timer_clk;
 
-	timer_clk = get_cclk() / TIME_SCALE;
+	timer_clk = bfin_clockevent_check();
 
-	setup_irq(IRQ_CORETMR, &bfin_timer_irq);
 	bfin_timer_init();
 
 	clockevent_bfin.mult = div_sc(timer_clk, NSEC_PER_SEC, clockevent_bfin.shift);
@@ -218,6 +361,7 @@ void __init time_init(void)
 	xtime.tv_nsec = 0;
 	set_normalized_timespec(&wall_to_monotonic, -xtime.tv_sec, -xtime.tv_nsec);
 
-	bfin_clocksource_init();
+	bfin_cs_cycles_init();
+	bfin_cs_gptimer0_init();
 	bfin_clockevent_init();
 }

arch/blackfin/kernel/time.c

@@ -24,14 +24,10 @@
 
 static struct irqaction bfin_timer_irq = {
 	.name = "Blackfin Timer Tick",
-#ifdef CONFIG_IRQ_PER_CPU
-	.flags = IRQF_DISABLED | IRQF_PERCPU,
-#else
 	.flags = IRQF_DISABLED
-#endif
 };
 
-#if defined(CONFIG_TICK_SOURCE_SYSTMR0) || defined(CONFIG_IPIPE)
+#if defined(CONFIG_IPIPE)
 void __init setup_system_timer0(void)
 {
 	/* Power down the core timer, just to play safe. */
@@ -74,7 +70,7 @@ void __init setup_core_timer(void)
 static void __init
 time_sched_init(irqreturn_t(*timer_routine) (int, void *))
 {
-#if defined(CONFIG_TICK_SOURCE_SYSTMR0) || defined(CONFIG_IPIPE)
+#if defined(CONFIG_IPIPE)
 	setup_system_timer0();
 	bfin_timer_irq.handler = timer_routine;
 	setup_irq(IRQ_TIMER0, &bfin_timer_irq);
@@ -94,7 +90,7 @@ static unsigned long gettimeoffset(void)
 	unsigned long offset;
 	unsigned long clocks_per_jiffy;
 
-#if defined(CONFIG_TICK_SOURCE_SYSTMR0) || defined(CONFIG_IPIPE)
+#if defined(CONFIG_IPIPE)
 	clocks_per_jiffy = bfin_read_TIMER0_PERIOD();
 	offset = bfin_read_TIMER0_COUNTER() / \
 		(((clocks_per_jiffy + 1) * HZ) / USEC_PER_SEC);
@@ -133,36 +129,25 @@ irqreturn_t timer_interrupt(int irq, void *dummy)
 	static long last_rtc_update;
 
 	write_seqlock(&xtime_lock);
-#if defined(CONFIG_TICK_SOURCE_SYSTMR0) && !defined(CONFIG_IPIPE)
+	do_timer(1);
+
 	/*
-	 * TIMIL0 is latched in __ipipe_grab_irq() when the I-Pipe is
-	 * enabled.
+	 * If we have an externally synchronized Linux clock, then update
+	 * CMOS clock accordingly every ~11 minutes. Set_rtc_mmss() has to be
+	 * called as close as possible to 500 ms before the new second starts.
 	 */
-	if (get_gptimer_status(0) & TIMER_STATUS_TIMIL0) {
-#endif
-		do_timer(1);
-
-		/*
-		 * If we have an externally synchronized Linux clock, then update
-		 * CMOS clock accordingly every ~11 minutes. Set_rtc_mmss() has to be
-		 * called as close as possible to 500 ms before the new second starts.
-		 */
-		if (ntp_synced() &&
-		    xtime.tv_sec > last_rtc_update + 660 &&
-		    (xtime.tv_nsec / NSEC_PER_USEC) >=
-		    500000 - ((unsigned)TICK_SIZE) / 2
-		    && (xtime.tv_nsec / NSEC_PER_USEC) <=
-		    500000 + ((unsigned)TICK_SIZE) / 2) {
-			if (set_rtc_mmss(xtime.tv_sec) == 0)
-				last_rtc_update = xtime.tv_sec;
-			else
-				/* Do it again in 60s. */
-				last_rtc_update = xtime.tv_sec - 600;
-		}
-#if defined(CONFIG_TICK_SOURCE_SYSTMR0) && !defined(CONFIG_IPIPE)
-		set_gptimer_status(0, TIMER_STATUS_TIMIL0);
+	if (ntp_synced() &&
+	    xtime.tv_sec > last_rtc_update + 660 &&
+	    (xtime.tv_nsec / NSEC_PER_USEC) >=
+	    500000 - ((unsigned)TICK_SIZE) / 2
+	    && (xtime.tv_nsec / NSEC_PER_USEC) <=
+	    500000 + ((unsigned)TICK_SIZE) / 2) {
+		if (set_rtc_mmss(xtime.tv_sec) == 0)
+			last_rtc_update = xtime.tv_sec;
+		else
+			/* Do it again in 60s. */
+			last_rtc_update = xtime.tv_sec - 600;
 	}
-#endif
 	write_sequnlock(&xtime_lock);
 
 #ifdef CONFIG_IPIPE

arch/blackfin/kernel/traps.c

@@ -68,6 +68,13 @@
 	({ if (0) printk(fmt, ##arg); 0; })
 #endif
 
+#if defined(CONFIG_DEBUG_MMRS) || defined(CONFIG_DEBUG_MMRS_MODULE)
+u32 last_seqstat;
+#ifdef CONFIG_DEBUG_MMRS_MODULE
+EXPORT_SYMBOL(last_seqstat);
+#endif
+#endif
+
 /* Initiate the event table handler */
 void __init trap_init(void)
 {
@@ -79,7 +86,6 @@ void __init trap_init(void)
 static void decode_address(char *buf, unsigned long address)
 {
 #ifdef CONFIG_DEBUG_VERBOSE
-	struct vm_list_struct *vml;
 	struct task_struct *p;
 	struct mm_struct *mm;
 	unsigned long flags, offset;
@@ -196,6 +202,11 @@ done:
 
 asmlinkage void double_fault_c(struct pt_regs *fp)
 {
+#ifdef CONFIG_DEBUG_BFIN_HWTRACE_ON
+	int j;
+	trace_buffer_save(j);
+#endif
+
 	console_verbose();
 	oops_in_progress = 1;
 #ifdef CONFIG_DEBUG_VERBOSE
@@ -220,9 +231,10 @@ asmlinkage void double_fault_c(struct pt_regs *fp)
 		dump_bfin_process(fp);
 		dump_bfin_mem(fp);
 		show_regs(fp);
+		dump_bfin_trace_buffer();
 	}
 #endif
-	panic("Double Fault - unrecoverable event\n");
+	panic("Double Fault - unrecoverable event");
 
 }
 
@@ -239,6 +251,9 @@ asmlinkage void trap_c(struct pt_regs *fp)
 	unsigned long trapnr = fp->seqstat & SEQSTAT_EXCAUSE;
 
 	trace_buffer_save(j);
+#if defined(CONFIG_DEBUG_MMRS) || defined(CONFIG_DEBUG_MMRS_MODULE)
+	last_seqstat = (u32)fp->seqstat;
+#endif
 
 	/* Important - be very careful dereferncing pointers - will lead to
 	 * double faults if the stack has become corrupt
@@ -588,6 +603,9 @@ asmlinkage void trap_c(struct pt_regs *fp)
 		force_sig_info(sig, &info, current);
 	}
 
+	if (ANOMALY_05000461 && trapnr == VEC_HWERR && !access_ok(VERIFY_READ, fp->pc, 8))
+		fp->pc = SAFE_USER_INSTRUCTION;
+
 	trace_buffer_restore(j);
 	return;
 }
@@ -832,6 +850,11 @@ void show_stack(struct task_struct *task, unsigned long *stack)
 	decode_address(buf, (unsigned int)stack);
 	printk(KERN_NOTICE " SP: [0x%p] %s\n", stack, buf);
 
+	if (!access_ok(VERIFY_READ, stack, (unsigned int)endstack - (unsigned int)stack)) {
+		printk(KERN_NOTICE "Invalid stack pointer\n");
+		return;
+	}
+
 	/* First thing is to look for a frame pointer */
 	for (addr = (unsigned int *)((unsigned int)stack & ~0xF); addr < endstack; addr++) {
 		if (*addr & 0x1)
@@ -1066,6 +1089,29 @@ void show_regs(struct pt_regs *fp)
 	unsigned int cpu = smp_processor_id();
 	unsigned char in_atomic = (bfin_read_IPEND() & 0x10) || in_atomic();
 
+	verbose_printk(KERN_NOTICE "\n");
+	if (CPUID != bfin_cpuid())
+		verbose_printk(KERN_NOTICE "Compiled for cpu family 0x%04x (Rev %d), "
+			"but running on:0x%04x (Rev %d)\n",
+			CPUID, bfin_compiled_revid(), bfin_cpuid(), bfin_revid());
+
+	verbose_printk(KERN_NOTICE "ADSP-%s-0.%d",
+		CPU, bfin_compiled_revid());
+
+	if (bfin_compiled_revid() !=  bfin_revid())
+		verbose_printk("(Detected 0.%d)", bfin_revid());
+
+	verbose_printk(" %lu(MHz CCLK) %lu(MHz SCLK) (%s)\n",
+		get_cclk()/1000000, get_sclk()/1000000,
+#ifdef CONFIG_MPU
+		"mpu on"
+#else
+		"mpu off"
+#endif
+		);
+
+	verbose_printk(KERN_NOTICE "%s", linux_banner);
+
 	verbose_printk(KERN_NOTICE "\n" KERN_NOTICE "SEQUENCER STATUS:\t\t%s\n", print_tainted());
 	verbose_printk(KERN_NOTICE " SEQSTAT: %08lx  IPEND: %04lx  SYSCFG: %04lx\n",
 		(long)fp->seqstat, fp->ipend, fp->syscfg);
@@ -1246,5 +1292,5 @@ void panic_cplb_error(int cplb_panic, struct pt_regs *fp)
 	dump_bfin_mem(fp);
 	show_regs(fp);
 	dump_stack();
-	panic("Unrecoverable event\n");
+	panic("Unrecoverable event");
 }

arch/blackfin/kernel/vmlinux.lds.S

@@ -50,7 +50,9 @@ SECTIONS
 		_text = .;
 		__stext = .;
 		TEXT_TEXT
+#ifndef CONFIG_SCHEDULE_L1
 		SCHED_TEXT
+#endif
 		LOCK_TEXT
 		KPROBES_TEXT
 		*(.text.*)
@@ -180,6 +182,9 @@ SECTIONS
 		. = ALIGN(4);
 		__stext_l1 = .;
 		*(.l1.text)
+#ifdef CONFIG_SCHEDULE_L1
+		SCHED_TEXT
+#endif
 		. = ALIGN(4);
 		__etext_l1 = .;
 	}

arch/blackfin/mach-bf518/Kconfig

@@ -156,6 +156,7 @@ config IRQ_PORTH_INTB
 	default 11
 config IRQ_TIMER0
 	int "IRQ_TIMER0"
+	default 7 if TICKSOURCE_GPTMR0
 	default 8
 config IRQ_TIMER1
 	int "IRQ_TIMER1"

arch/blackfin/mach-bf518/boards/ezbrd.c

@@ -82,7 +82,11 @@ static struct physmap_flash_data ezbrd_flash_data = {
 
 static struct resource ezbrd_flash_resource = {
 	.start = 0x20000000,
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+	.end   = 0x202fffff,
+#else
 	.end   = 0x203fffff,
+#endif
 	.flags = IORESOURCE_MEM,
 };
 
@@ -162,8 +166,8 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_SPI_ADC_BF533) \
-	|| defined(CONFIG_SPI_ADC_BF533_MODULE)
+#if defined(CONFIG_BFIN_SPI_ADC) \
+	|| defined(CONFIG_BFIN_SPI_ADC_MODULE)
 /* SPI ADC chip */
 static struct bfin5xx_spi_chip spi_adc_chip_info = {
 	.enable_dma = 1,         /* use dma transfer with this chip*/
@@ -249,8 +253,8 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 	},
 #endif
 
-#if defined(CONFIG_SPI_ADC_BF533) \
-	|| defined(CONFIG_SPI_ADC_BF533_MODULE)
+#if defined(CONFIG_BFIN_SPI_ADC) \
+	|| defined(CONFIG_BFIN_SPI_ADC_MODULE)
 	{
 		.modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
 		.max_speed_hz = 6250000,     /* max spi clock (SCK) speed in HZ */
@@ -514,7 +518,7 @@ static struct platform_device i2c_bfin_twi_device = {
 #endif
 
 static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
-#if defined(CONFIG_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
+#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
 	{
 		I2C_BOARD_INFO("pcf8574_lcd", 0x22),
 	},
@@ -678,6 +682,11 @@ static int __init ezbrd_init(void)
 				ARRAY_SIZE(bfin_i2c_board_info));
 	platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
 	spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
+	/* setup BF518-EZBRD GPIO pin PG11 to AMS2, PG15 to AMS3. */
+	peripheral_request(P_AMS2, "ParaFlash");
+#if !defined(CONFIG_SPI_BFIN) && !defined(CONFIG_SPI_BFIN_MODULE)
+	peripheral_request(P_AMS3, "ParaFlash");
+#endif
 	return 0;
 }
 

arch/blackfin/mach-bf518/include/mach/anomaly.h

@@ -6,14 +6,19 @@
  * Licensed under the GPL-2 or later.
  */
 
-/* This file shoule be up to date with:
+/* This file should be up to date with:
  *  - Revision B, 02/03/2009; ADSP-BF512/BF514/BF516/BF518 Blackfin Processor Anomaly List
  */
 
+/* We plan on not supporting 0.0 silicon, but 0.1 isn't out yet - sorry */
+#if __SILICON_REVISION__ < 0
+# error will not work on BF518 silicon version
+#endif
+
 #ifndef _MACH_ANOMALY_H_
 #define _MACH_ANOMALY_H_
 
-/* Multi-Issue Instruction with dsp32shiftimm in slot1 and P-reg Store in slot2 Not Supported */
+/* Multi-issue instruction with dsp32shiftimm in slot1 and P-reg store in slot 2 not supported */
 #define ANOMALY_05000074 (1)
 /* Rx.H Cannot Be Used to Access 16-bit System MMR Registers */
 #define ANOMALY_05000122 (1)
@@ -47,7 +52,7 @@
 #define ANOMALY_05000435 (1)
 /* PORTx_DRIVE and PORTx_HYSTERESIS Registers Read Back Incorrect Values */
 #define ANOMALY_05000438 (1)
-/* Preboot Cannot be Used to Program the PLL_DIV Register */
+/* Preboot Cannot be Used to Alter the PLL_DIV Register */
 #define ANOMALY_05000439 (1)
 /* bfrom_SysControl() Cannot be Used to Write the PLL_DIV Register */
 #define ANOMALY_05000440 (1)
@@ -61,32 +66,56 @@
 #define ANOMALY_05000453 (1)
 /* PPI_FS3 is Driven One Half Cycle Later Than PPI Data */
 #define ANOMALY_05000455 (1)
+/* False Hardware Error when RETI points to invalid memory */
+#define ANOMALY_05000461 (1)
 
 /* Anomalies that don't exist on this proc */
+#define ANOMALY_05000099 (0)
+#define ANOMALY_05000119 (0)
+#define ANOMALY_05000120 (0)
 #define ANOMALY_05000125 (0)
+#define ANOMALY_05000149 (0)
 #define ANOMALY_05000158 (0)
+#define ANOMALY_05000171 (0)
+#define ANOMALY_05000179 (0)
 #define ANOMALY_05000183 (0)
 #define ANOMALY_05000198 (0)
+#define ANOMALY_05000215 (0)
+#define ANOMALY_05000220 (0)
+#define ANOMALY_05000227 (0)
 #define ANOMALY_05000230 (0)
+#define ANOMALY_05000231 (0)
+#define ANOMALY_05000233 (0)
+#define ANOMALY_05000242 (0)
 #define ANOMALY_05000244 (0)
+#define ANOMALY_05000248 (0)
+#define ANOMALY_05000250 (0)
 #define ANOMALY_05000261 (0)
 #define ANOMALY_05000263 (0)
 #define ANOMALY_05000266 (0)
 #define ANOMALY_05000273 (0)
+#define ANOMALY_05000274 (0)
 #define ANOMALY_05000278 (0)
 #define ANOMALY_05000285 (0)
+#define ANOMALY_05000287 (0)
+#define ANOMALY_05000301 (0)
 #define ANOMALY_05000305 (0)
 #define ANOMALY_05000307 (0)
 #define ANOMALY_05000311 (0)
 #define ANOMALY_05000312 (0)
 #define ANOMALY_05000323 (0)
 #define ANOMALY_05000353 (0)
+#define ANOMALY_05000362 (1)
 #define ANOMALY_05000363 (0)
 #define ANOMALY_05000380 (0)
 #define ANOMALY_05000386 (0)
+#define ANOMALY_05000389 (0)
+#define ANOMALY_05000400 (0)
 #define ANOMALY_05000412 (0)
 #define ANOMALY_05000432 (0)
 #define ANOMALY_05000447 (0)
 #define ANOMALY_05000448 (0)
+#define ANOMALY_05000456 (0)
+#define ANOMALY_05000450 (0)
 
 #endif

arch/blackfin/mach-bf518/include/mach/portmux.h

@@ -185,6 +185,10 @@
 #define P_PTP_PPS		(P_DEFINED | P_IDENT(GPIO_PG12) | P_FUNCT(2))
 #define P_PTP_CLKOUT		(P_DEFINED | P_IDENT(GPIO_PG13) | P_FUNCT(2))
 
-#define P_HWAIT		(P_DEFINED | P_IDENT(GPIO_PG000000000) | P_FUNCT(1))
+/* AMS */
+#define P_AMS2			(P_DEFINED | P_IDENT(GPIO_PG11) | P_FUNCT(1))
+#define P_AMS3			(P_DEFINED | P_IDENT(GPIO_PG15) | P_FUNCT(2))
+
+#define P_HWAIT			(P_DEFINED | P_IDENT(GPIO_PG000000000) | P_FUNCT(1))
 
 #endif				/* _MACH_PORTMUX_H_ */

arch/blackfin/mach-bf527/Kconfig

@@ -170,6 +170,7 @@ config IRQ_PORTH_INTB
 	default 11
 config IRQ_TIMER0
 	int "IRQ_TIMER0"
+	default 7 if TICKSOURCE_GPTMR0
 	default 8
 config IRQ_TIMER1
 	int "IRQ_TIMER1"

arch/blackfin/mach-bf527/boards/cm_bf527.c

@@ -463,8 +463,8 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_SPI_ADC_BF533) \
-	|| defined(CONFIG_SPI_ADC_BF533_MODULE)
+#if defined(CONFIG_BFIN_SPI_ADC) \
+	|| defined(CONFIG_BFIN_SPI_ADC_MODULE)
 /* SPI ADC chip */
 static struct bfin5xx_spi_chip spi_adc_chip_info = {
 	.enable_dma = 1,         /* use dma transfer with this chip*/
@@ -554,8 +554,8 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 	},
 #endif
 
-#if defined(CONFIG_SPI_ADC_BF533) \
-	|| defined(CONFIG_SPI_ADC_BF533_MODULE)
+#if defined(CONFIG_BFIN_SPI_ADC) \
+	|| defined(CONFIG_BFIN_SPI_ADC_MODULE)
 	{
 		.modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
 		.max_speed_hz = 6250000,     /* max spi clock (SCK) speed in HZ */
@@ -789,7 +789,7 @@ static struct platform_device i2c_bfin_twi_device = {
 #endif
 
 static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
-#if defined(CONFIG_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
+#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
 	{
 		I2C_BOARD_INFO("pcf8574_lcd", 0x22),
 		.type = "pcf8574_lcd",

arch/blackfin/mach-bf527/boards/ezbrd.c

@@ -247,8 +247,8 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_SPI_ADC_BF533) \
-	|| defined(CONFIG_SPI_ADC_BF533_MODULE)
+#if defined(CONFIG_BFIN_SPI_ADC) \
+	|| defined(CONFIG_BFIN_SPI_ADC_MODULE)
 /* SPI ADC chip */
 static struct bfin5xx_spi_chip spi_adc_chip_info = {
 	.enable_dma = 1,         /* use dma transfer with this chip*/
@@ -354,8 +354,8 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 	},
 #endif
 
-#if defined(CONFIG_SPI_ADC_BF533) \
-	|| defined(CONFIG_SPI_ADC_BF533_MODULE)
+#if defined(CONFIG_BFIN_SPI_ADC) \
+	|| defined(CONFIG_BFIN_SPI_ADC_MODULE)
 	{
 		.modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
 		.max_speed_hz = 6250000,     /* max spi clock (SCK) speed in HZ */
@@ -586,7 +586,7 @@ static struct platform_device i2c_bfin_twi_device = {
 #endif
 
 static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
-#if defined(CONFIG_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
+#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
 	{
 		I2C_BOARD_INFO("pcf8574_lcd", 0x22),
 	},

arch/blackfin/mach-bf527/boards/ezkit.c

@@ -485,8 +485,8 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_SPI_ADC_BF533) \
-	|| defined(CONFIG_SPI_ADC_BF533_MODULE)
+#if defined(CONFIG_BFIN_SPI_ADC) \
+	|| defined(CONFIG_BFIN_SPI_ADC_MODULE)
 /* SPI ADC chip */
 static struct bfin5xx_spi_chip spi_adc_chip_info = {
 	.enable_dma = 1,         /* use dma transfer with this chip*/
@@ -509,6 +509,13 @@ static struct bfin5xx_spi_chip ad9960_spi_chip_info = {
 };
 #endif
 
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+static struct bfin5xx_spi_chip  mmc_spi_chip_info = {
+	.enable_dma = 0,
+	.bits_per_word = 8,
+};
+#endif
+
 #if defined(CONFIG_PBX)
 static struct bfin5xx_spi_chip spi_si3xxx_chip_info = {
 	.ctl_reg	= 0x4, /* send zero */
@@ -593,8 +600,8 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 	},
 #endif
 
-#if defined(CONFIG_SPI_ADC_BF533) \
-	|| defined(CONFIG_SPI_ADC_BF533_MODULE)
+#if defined(CONFIG_BFIN_SPI_ADC) \
+	|| defined(CONFIG_BFIN_SPI_ADC_MODULE)
 	{
 		.modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
 		.max_speed_hz = 6250000,     /* max spi clock (SCK) speed in HZ */
@@ -624,6 +631,17 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 		.controller_data = &ad9960_spi_chip_info,
 	},
 #endif
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+	{
+		.modalias = "mmc_spi",
+		.max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = 3,
+		.controller_data = &mmc_spi_chip_info,
+		.mode = SPI_MODE_0,
+	},
+#endif
+
 #if defined(CONFIG_PBX)
 	{
 		.modalias = "fxs-spi",
@@ -836,7 +854,7 @@ static struct platform_device i2c_bfin_twi_device = {
 #endif
 
 static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
-#if defined(CONFIG_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
+#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
 	{
 		I2C_BOARD_INFO("pcf8574_lcd", 0x22),
 	},

arch/blackfin/mach-bf527/include/mach/anomaly.h

@@ -6,14 +6,19 @@
  * Licensed under the GPL-2 or later.
  */
 
-/* This file shoule be up to date with:
- *  - Revision B, 08/12/2008; ADSP-BF526 Blackfin Processor Anomaly List
- *  - Revision E, 08/18/2008; ADSP-BF527 Blackfin Processor Anomaly List
+/* This file should be up to date with:
+ *  - Revision C, 03/13/2009; ADSP-BF526 Blackfin Processor Anomaly List
+ *  - Revision F, 03/03/2009; ADSP-BF527 Blackfin Processor Anomaly List
  */
 
 #ifndef _MACH_ANOMALY_H_
 #define _MACH_ANOMALY_H_
 
+/* We do not support old silicon - sorry */
+#if __SILICON_REVISION__ < 0
+# error will not work on BF526/BF527 silicon version
+#endif
+
 #if defined(__ADSPBF522__) || defined(__ADSPBF524__) || defined(__ADSPBF526__)
 # define ANOMALY_BF526 1
 #else
@@ -25,158 +30,203 @@
 # define ANOMALY_BF527 0
 #endif
 
-/* Multi-Issue Instruction with dsp32shiftimm in slot1 and P-reg Store in slot2 Not Supported */
+#define _ANOMALY_BF526(rev526) (ANOMALY_BF526 && __SILICON_REVISION__ rev526)
+#define _ANOMALY_BF527(rev527) (ANOMALY_BF527 && __SILICON_REVISION__ rev527)
+#define _ANOMALY_BF526_BF527(rev526, rev527) (_ANOMALY_BF526(rev526) || _ANOMALY_BF527(rev527))
+
+/* Multi-issue instruction with dsp32shiftimm in slot1 and P-reg store in slot 2 not supported */
 #define ANOMALY_05000074 (1)
 /* DMA_RUN Bit Is Not Valid after a Peripheral Receive Channel DMA Stops */
 #define ANOMALY_05000119 (1)	/* note: brokenness is noted in documentation, not anomaly sheet */
 /* Rx.H Cannot Be Used to Access 16-bit System MMR Registers */
 #define ANOMALY_05000122 (1)
-/* Spurious Hardware Error from an Access in the Shadow of a Conditional Branch */
+/* False Hardware Error from an Access in the Shadow of a Conditional Branch */
 #define ANOMALY_05000245 (1)
+/* Incorrect Timer Pulse Width in Single-Shot PWM_OUT Mode with External Clock */
+#define ANOMALY_05000254 (1)
 /* Sensitivity To Noise with Slow Input Edge Rates on External SPORT TX and RX Clocks */
 #define ANOMALY_05000265 (1)
 /* False Hardware Errors Caused by Fetches at the Boundary of Reserved Memory */
 #define ANOMALY_05000310 (1)
 /* PPI Is Level-Sensitive on First Transfer In Single Frame Sync Modes */
-#define ANOMALY_05000313 (__SILICON_REVISION__ < 2)
+#define ANOMALY_05000313 (_ANOMALY_BF526_BF527(< 1, < 2))
 /* Incorrect Access of OTP_STATUS During otp_write() Function */
-#define ANOMALY_05000328 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+#define ANOMALY_05000328 (_ANOMALY_BF527(< 2))
+/* Host DMA Boot Modes Are Not Functional */
+#define ANOMALY_05000330 (__SILICON_REVISION__ < 2)
 /* Disallowed Configuration Prevents Subsequent Allowed Configuration on Host DMA Port */
-#define ANOMALY_05000337 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+#define ANOMALY_05000337 (_ANOMALY_BF527(< 2))
 /* Ethernet MAC MDIO Reads Do Not Meet IEEE Specification */
-#define ANOMALY_05000341 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+#define ANOMALY_05000341 (_ANOMALY_BF527(< 2))
 /* TWI May Not Operate Correctly Under Certain Signal Termination Conditions */
-#define ANOMALY_05000342 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+#define ANOMALY_05000342 (_ANOMALY_BF527(< 2))
 /* USB Calibration Value Is Not Initialized */
-#define ANOMALY_05000346 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+#define ANOMALY_05000346 (_ANOMALY_BF526_BF527(< 1, < 2))
 /* USB Calibration Value to use */
 #define ANOMALY_05000346_value 0xE510
 /* Preboot Routine Incorrectly Alters Reset Value of USB Register */
-#define ANOMALY_05000347 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+#define ANOMALY_05000347 (_ANOMALY_BF527(< 2))
 /* Security Features Are Not Functional */
-#define ANOMALY_05000348 (ANOMALY_BF527 && __SILICON_REVISION__ < 1)
+#define ANOMALY_05000348 (_ANOMALY_BF527(< 1))
 /* bfrom_SysControl() Firmware Function Performs Improper System Reset */
-#define ANOMALY_05000353 (ANOMALY_BF526)
+#define ANOMALY_05000353 (_ANOMALY_BF526(< 1))
 /* Regulator Programming Blocked when Hibernate Wakeup Source Remains Active */
-#define ANOMALY_05000355 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+#define ANOMALY_05000355 (_ANOMALY_BF527(< 2))
 /* Serial Port (SPORT) Multichannel Transmit Failure when Channel 0 Is Disabled */
-#define ANOMALY_05000357 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+#define ANOMALY_05000357 (_ANOMALY_BF527(< 2))
 /* Incorrect Revision Number in DSPID Register */
-#define ANOMALY_05000364 (ANOMALY_BF527 && __SILICON_REVISION__ == 1)
+#define ANOMALY_05000364 (_ANOMALY_BF527(== 1))
 /* PPI Underflow Error Goes Undetected in ITU-R 656 Mode */
 #define ANOMALY_05000366 (1)
 /* Incorrect Default CSEL Value in PLL_DIV */
-#define ANOMALY_05000368 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+#define ANOMALY_05000368 (_ANOMALY_BF527(< 2))
 /* Possible RETS Register Corruption when Subroutine Is under 5 Cycles in Duration */
-#define ANOMALY_05000371 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+#define ANOMALY_05000371 (_ANOMALY_BF527(< 2))
 /* Authentication Fails To Initiate */
-#define ANOMALY_05000376 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+#define ANOMALY_05000376 (_ANOMALY_BF527(< 2))
 /* Data Read From L3 Memory by USB DMA May be Corrupted */
-#define ANOMALY_05000380 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+#define ANOMALY_05000380 (_ANOMALY_BF527(< 2))
 /* 8-Bit NAND Flash Boot Mode Not Functional */
-#define ANOMALY_05000382 (__SILICON_REVISION__ < 2)
-/* Host Must Not Read Back During Host DMA Boot */
-#define ANOMALY_05000384 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+#define ANOMALY_05000382 (_ANOMALY_BF526_BF527(< 1, < 2))
 /* Boot from OTP Memory Not Functional */
-#define ANOMALY_05000385 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+#define ANOMALY_05000385 (_ANOMALY_BF527(< 2))
 /* bfrom_SysControl() Firmware Routine Not Functional */
-#define ANOMALY_05000386 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+#define ANOMALY_05000386 (_ANOMALY_BF527(< 2))
 /* Programmable Preboot Settings Not Functional */
-#define ANOMALY_05000387 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+#define ANOMALY_05000387 (_ANOMALY_BF527(< 2))
 /* CRC32 Checksum Support Not Functional */
-#define ANOMALY_05000388 (__SILICON_REVISION__ < 2)
+#define ANOMALY_05000388 (_ANOMALY_BF526_BF527(< 1, < 2))
 /* Reset Vector Must Not Be in SDRAM Memory Space */
-#define ANOMALY_05000389 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+#define ANOMALY_05000389 (_ANOMALY_BF527(< 2))
 /* pTempCurrent Not Present in ADI_BOOT_DATA Structure */
-#define ANOMALY_05000392 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+#define ANOMALY_05000392 (_ANOMALY_BF527(< 2))
 /* Deprecated Value of dTempByteCount in ADI_BOOT_DATA Structure */
-#define ANOMALY_05000393 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+#define ANOMALY_05000393 (_ANOMALY_BF527(< 2))
 /* Log Buffer Not Functional */
-#define ANOMALY_05000394 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+#define ANOMALY_05000394 (_ANOMALY_BF527(< 2))
 /* Hook Routine Not Functional */
-#define ANOMALY_05000395 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+#define ANOMALY_05000395 (_ANOMALY_BF527(< 2))
 /* Header Indirect Bit Not Functional */
-#define ANOMALY_05000396 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+#define ANOMALY_05000396 (_ANOMALY_BF527(< 2))
 /* BK_ONES, BK_ZEROS, and BK_DATECODE Constants Not Functional */
-#define ANOMALY_05000397 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+#define ANOMALY_05000397 (_ANOMALY_BF527(< 2))
 /* SWRESET, DFRESET and WDRESET Bits in the SYSCR Register Not Functional */
-#define ANOMALY_05000398 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+#define ANOMALY_05000398 (_ANOMALY_BF527(< 2))
 /* BCODE_NOBOOT in BCODE Field of SYSCR Register Not Functional */
-#define ANOMALY_05000399 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+#define ANOMALY_05000399 (_ANOMALY_BF527(< 2))
 /* PPI Data Signals D0 and D8 do not Tristate After Disabling PPI */
-#define ANOMALY_05000401 (__SILICON_REVISION__ < 2)
+#define ANOMALY_05000401 (_ANOMALY_BF526_BF527(< 1, < 2))
 /* Level-Sensitive External GPIO Wakeups May Cause Indefinite Stall */
-#define ANOMALY_05000403 (__SILICON_REVISION__ < 2)
+#define ANOMALY_05000403 (_ANOMALY_BF526_BF527(< 1, < 2))
 /* Lockbox SESR Disallows Certain User Interrupts */
-#define ANOMALY_05000404 (__SILICON_REVISION__ < 2)
+#define ANOMALY_05000404 (_ANOMALY_BF526_BF527(< 1, < 2))
 /* Lockbox SESR Firmware Does Not Save/Restore Full Context */
 #define ANOMALY_05000405 (1)
 /* Lockbox SESR Firmware Arguments Are Not Retained After First Initialization */
-#define ANOMALY_05000407 (__SILICON_REVISION__ < 2)
+#define ANOMALY_05000407 (_ANOMALY_BF526_BF527(< 1, < 2))
 /* Lockbox Firmware Memory Cleanup Routine Does not Clear Registers */
 #define ANOMALY_05000408 (1)
 /* Lockbox firmware leaves MDMA0 channel enabled */
-#define ANOMALY_05000409 (__SILICON_REVISION__ < 2)
+#define ANOMALY_05000409 (_ANOMALY_BF526_BF527(< 1, < 2))
 /* Incorrect Default Internal Voltage Regulator Setting */
-#define ANOMALY_05000410 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+#define ANOMALY_05000410 (_ANOMALY_BF527(< 2))
 /* bfrom_SysControl() Firmware Function Cannot be Used to Enter Power Saving Modes */
-#define ANOMALY_05000411 (__SILICON_REVISION__ < 2)
+#define ANOMALY_05000411 (_ANOMALY_BF526_BF527(< 1, < 2))
 /* OTP_CHECK_FOR_PREV_WRITE Bit is Not Functional in bfrom_OtpWrite() API */
-#define ANOMALY_05000414 (__SILICON_REVISION__ < 2)
+#define ANOMALY_05000414 (_ANOMALY_BF526_BF527(< 1, < 2))
 /* DEB2_URGENT Bit Not Functional */
-#define ANOMALY_05000415 (__SILICON_REVISION__ < 2)
+#define ANOMALY_05000415 (_ANOMALY_BF526_BF527(< 1, < 2))
 /* Speculative Fetches Can Cause Undesired External FIFO Operations */
 #define ANOMALY_05000416 (1)
 /* SPORT0 Ignores External TSCLK0 on PG14 When TMR6 is an Output */
-#define ANOMALY_05000417 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
-/* tSFSPE and tHFSPE Do Not Meet Data Sheet Specifications */
-#define ANOMALY_05000418 (__SILICON_REVISION__ < 2)
+#define ANOMALY_05000417 (_ANOMALY_BF527(< 2))
+/* PPI Timing Requirements tSFSPE and tHFSPE Do Not Meet Data Sheet Specifications */
+#define ANOMALY_05000418 (_ANOMALY_BF526_BF527(< 1, < 2))
 /* USB PLL_STABLE Bit May Not Accurately Reflect the USB PLL's Status */
-#define ANOMALY_05000420 (__SILICON_REVISION__ < 2)
+#define ANOMALY_05000420 (_ANOMALY_BF526_BF527(< 1, < 2))
 /* TWI Fall Time (Tof) May Violate the Minimum I2C Specification */
 #define ANOMALY_05000421 (1)
 /* TWI Input Capacitance (Ci) May Violate the Maximum I2C Specification */
-#define ANOMALY_05000422 (ANOMALY_BF527 && __SILICON_REVISION__ > 1)
+#define ANOMALY_05000422 (_ANOMALY_BF526_BF527(> 0, > 1))
 /* Certain Ethernet Frames With Errors are Misclassified in RMII Mode */
-#define ANOMALY_05000423 (__SILICON_REVISION__ < 2)
+#define ANOMALY_05000423 (_ANOMALY_BF526_BF527(< 1, < 2))
 /* Internal Voltage Regulator Not Trimmed */
-#define ANOMALY_05000424 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+#define ANOMALY_05000424 (_ANOMALY_BF527(< 2))
 /* Multichannel SPORT Channel Misalignment Under Specific Configuration */
-#define ANOMALY_05000425 (__SILICON_REVISION__ < 2)
-/* Speculative Fetches of Indirect-Pointer Instructions Can Cause Spurious Hardware Errors */
+#define ANOMALY_05000425 (_ANOMALY_BF526_BF527(< 1, < 2))
+/* Speculative Fetches of Indirect-Pointer Instructions Can Cause False Hardware Errors */
 #define ANOMALY_05000426 (1)
 /* WB_EDGE Bit in NFC_IRQSTAT Incorrectly Reflects Buffer Status Instead of IRQ Status */
-#define ANOMALY_05000429 (__SILICON_REVISION__ < 2)
+#define ANOMALY_05000429 (_ANOMALY_BF526_BF527(< 1, < 2))
 /* Software System Reset Corrupts PLL_LOCKCNT Register */
-#define ANOMALY_05000430 (ANOMALY_BF527 && __SILICON_REVISION__ > 1)
+#define ANOMALY_05000430 (_ANOMALY_BF527(> 1))
+/* Incorrect Use of Stack in Lockbox Firmware During Authentication */
+#define ANOMALY_05000431 (1)
 /* bfrom_SysControl() Does Not Clear SIC_IWR1 Before Executing PLL Programming Sequence */
-#define ANOMALY_05000432 (ANOMALY_BF526)
+#define ANOMALY_05000432 (_ANOMALY_BF526(< 1))
 /* Certain SIC Registers are not Reset After Soft or Core Double Fault Reset */
-#define ANOMALY_05000435 ((ANOMALY_BF526 && __SILICON_REVISION__ < 1) || ANOMALY_BF527)
+#define ANOMALY_05000435 (_ANOMALY_BF526_BF527(< 1, >= 0))
+/* Preboot Cannot be Used to Alter the PLL_DIV Register */
+#define ANOMALY_05000439 (_ANOMALY_BF526_BF527(< 1, >= 0))
+/* bfrom_SysControl() Cannot be Used to Write the PLL_DIV Register */
+#define ANOMALY_05000440 (_ANOMALY_BF526_BF527(< 1, >= 0))
+/* OTP Write Accesses Not Supported */
+#define ANOMALY_05000442 (_ANOMALY_BF527(< 1))
 /* IFLUSH Instruction at End of Hardware Loop Causes Infinite Stall */
 #define ANOMALY_05000443 (1)
+/* The WURESET Bit in the SYSCR Register is not Functional */
+#define ANOMALY_05000445 (1)
+/* BCODE_QUICKBOOT, BCODE_ALLBOOT, and BCODE_FULLBOOT Settings in SYSCR Register Not Functional */
+#define ANOMALY_05000451 (1)
+/* Incorrect Default Hysteresis Setting for RESET, NMI, and BMODE Signals */
+#define ANOMALY_05000452 (_ANOMALY_BF526_BF527(< 1, >= 0))
+/* USB Receive Interrupt Is Not Generated in DMA Mode 1 */
+#define ANOMALY_05000456 (1)
+/* Host DMA Port Responds to Certain Bus Activity Without HOST_CE Assertion */
+#define ANOMALY_05000457 (1)
+/* False Hardware Error when RETI points to invalid memory */
+#define ANOMALY_05000461 (1)
 
 /* Anomalies that don't exist on this proc */
+#define ANOMALY_05000099 (0)
+#define ANOMALY_05000120 (0)
 #define ANOMALY_05000125 (0)
+#define ANOMALY_05000149 (0)
 #define ANOMALY_05000158 (0)
+#define ANOMALY_05000171 (0)
+#define ANOMALY_05000179 (0)
 #define ANOMALY_05000183 (0)
 #define ANOMALY_05000198 (0)
+#define ANOMALY_05000215 (0)
+#define ANOMALY_05000220 (0)
+#define ANOMALY_05000227 (0)
 #define ANOMALY_05000230 (0)
+#define ANOMALY_05000231 (0)
+#define ANOMALY_05000233 (0)
+#define ANOMALY_05000242 (0)
 #define ANOMALY_05000244 (0)
+#define ANOMALY_05000248 (0)
+#define ANOMALY_05000250 (0)
 #define ANOMALY_05000261 (0)
 #define ANOMALY_05000263 (0)
 #define ANOMALY_05000266 (0)
 #define ANOMALY_05000273 (0)
+#define ANOMALY_05000274 (0)
 #define ANOMALY_05000278 (0)
 #define ANOMALY_05000285 (0)
+#define ANOMALY_05000287 (0)
+#define ANOMALY_05000301 (0)
 #define ANOMALY_05000305 (0)
 #define ANOMALY_05000307 (0)
 #define ANOMALY_05000311 (0)
 #define ANOMALY_05000312 (0)
 #define ANOMALY_05000323 (0)
+#define ANOMALY_05000362 (1)
 #define ANOMALY_05000363 (0)
+#define ANOMALY_05000400 (0)
 #define ANOMALY_05000412 (0)
 #define ANOMALY_05000447 (0)
 #define ANOMALY_05000448 (0)
+#define ANOMALY_05000450 (0)
 
 #endif

arch/blackfin/mach-bf533/Kconfig

@@ -59,6 +59,7 @@ config DMA7_UARTTX
 	default 10
 config TIMER0
 	int "TIMER0"
+	default 7 if TICKSOURCE_GPTMR0
 	default 8
 config TIMER1
 	int "TIMER1"

arch/blackfin/mach-bf533/boards/H8606.c

@@ -173,7 +173,7 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE)
+#if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE)
 /* SPI ADC chip */
 static struct bfin5xx_spi_chip spi_adc_chip_info = {
 	.ctl_reg = 0x1000,
@@ -216,7 +216,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 	},
 #endif
 
-#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE)
+#if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE)
 	{
 		.modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
 		.max_speed_hz = 4,     /* actual baudrate is SCLK/(2xspeed_hz) */

arch/blackfin/mach-bf533/boards/cm_bf533.c

@@ -82,7 +82,7 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = {
 #endif
 
 /* SPI ADC chip */
-#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE)
+#if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE)
 static struct bfin5xx_spi_chip spi_adc_chip_info = {
 	.enable_dma = 1,         /* use dma transfer with this chip*/
 	.bits_per_word = 16,
@@ -117,7 +117,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 	},
 #endif
 
-#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE)
+#if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE)
 	{
 		.modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
 		.max_speed_hz = 6250000,     /* max spi clock (SCK) speed in HZ */

arch/blackfin/mach-bf533/boards/ezkit.c

@@ -118,7 +118,7 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE)
+#if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE)
 /* SPI ADC chip */
 static struct bfin5xx_spi_chip spi_adc_chip_info = {
 	.enable_dma = 1,         /* use dma transfer with this chip*/
@@ -154,7 +154,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 	},
 #endif
 
-#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE)
+#if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE)
 	{
 		.modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
 		.max_speed_hz = 6250000,     /* max spi clock (SCK) speed in HZ */

arch/blackfin/mach-bf533/boards/stamp.c

@@ -192,7 +192,7 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE)
+#if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE)
 /* SPI ADC chip */
 static struct bfin5xx_spi_chip spi_adc_chip_info = {
 	.enable_dma = 1,         /* use dma transfer with this chip*/
@@ -237,7 +237,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 	},
 #endif
 
-#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE)
+#if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE)
 	{
 		.modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
 		.max_speed_hz = 6250000,     /* max spi clock (SCK) speed in HZ */
@@ -448,7 +448,7 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
 		.irq = 39,
 	},
 #endif
-#if defined(CONFIG_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
+#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
 	{
 		I2C_BOARD_INFO("pcf8574_lcd", 0x22),
 	},

arch/blackfin/mach-bf533/include/mach/anomaly.h

@@ -6,7 +6,7 @@
  * Licensed under the GPL-2 or later.
  */
 
-/* This file shoule be up to date with:
+/* This file should be up to date with:
  *  - Revision E, 09/18/2008; ADSP-BF531/BF532/BF533 Blackfin Processor Anomaly List
  */
 
@@ -34,12 +34,12 @@
 # define ANOMALY_BF533 0
 #endif
 
-/* Multi-Issue Instruction with dsp32shiftimm in slot1 and P-reg Store in slot 2 Not Supported */
+/* Multi-issue instruction with dsp32shiftimm in slot1 and P-reg store in slot 2 not supported */
 #define ANOMALY_05000074 (1)
 /* UART Line Status Register (UART_LSR) Bits Are Not Updated at the Same Time */
 #define ANOMALY_05000099 (__SILICON_REVISION__ < 5)
 /* Watchpoint Status Register (WPSTAT) Bits Are Set on Every Corresponding Match */
-#define ANOMALY_05000105 (1)
+#define ANOMALY_05000105 (__SILICON_REVISION__ > 2)
 /* DMA_RUN Bit Is Not Valid after a Peripheral Receive Channel DMA Stops */
 #define ANOMALY_05000119 (1)
 /* Rx.H Cannot Be Used to Access 16-bit System MMR Registers */
@@ -48,7 +48,7 @@
 #define ANOMALY_05000158 (__SILICON_REVISION__ < 5)
 /* PPI Data Lengths Between 8 and 16 Do Not Zero Out Upper Bits */
 #define ANOMALY_05000166 (1)
-/* Turning Serial Ports on with External Frame Syncs */
+/* Turning SPORTs on while External Frame Sync Is Active May Corrupt Data */
 #define ANOMALY_05000167 (1)
 /* PPI_COUNT Cannot Be Programmed to 0 in General Purpose TX or RX Modes */
 #define ANOMALY_05000179 (__SILICON_REVISION__ < 5)
@@ -67,9 +67,9 @@
 /* Current DMA Address Shows Wrong Value During Carry Fix */
 #define ANOMALY_05000199 (__SILICON_REVISION__ < 4)
 /* SPORT TFS and DT Are Incorrectly Driven During Inactive Channels in Certain Conditions */
-#define ANOMALY_05000200 (__SILICON_REVISION__ < 5)
+#define ANOMALY_05000200 (__SILICON_REVISION__ == 3 || __SILICON_REVISION__ == 4)
 /* Receive Frame Sync Not Ignored During Active Frames in SPORT Multi-Channel Mode */
-#define ANOMALY_05000201 (__SILICON_REVISION__ < 4)
+#define ANOMALY_05000201 (__SILICON_REVISION__ == 3)
 /* Possible Infinite Stall with Specific Dual-DAG Situation */
 #define ANOMALY_05000202 (__SILICON_REVISION__ < 5)
 /* Specific Sequence That Can Cause DMA Error or DMA Stopping */
@@ -104,7 +104,7 @@
 #define ANOMALY_05000242 (__SILICON_REVISION__ < 5)
 /* If I-Cache Is On, CSYNC/SSYNC/IDLE Around Change of Control Causes Failures */
 #define ANOMALY_05000244 (__SILICON_REVISION__ < 5)
-/* Spurious Hardware Error from an Access in the Shadow of a Conditional Branch */
+/* False Hardware Error from an Access in the Shadow of a Conditional Branch */
 #define ANOMALY_05000245 (1)
 /* Data CPLBs Should Prevent Spurious Hardware Errors */
 #define ANOMALY_05000246 (__SILICON_REVISION__ < 5)
@@ -137,7 +137,7 @@
 /* High I/O Activity Causes Output Voltage of Internal Voltage Regulator (Vddint) to Decrease */
 #define ANOMALY_05000270 (__SILICON_REVISION__ < 5)
 /* Spontaneous Reset of Internal Voltage Regulator */
-#define ANOMALY_05000271 (__SILICON_REVISION__ < 4)
+#define ANOMALY_05000271 (__SILICON_REVISION__ == 3)
 /* Certain Data Cache Writethrough Modes Fail for Vddint <= 0.9V */
 #define ANOMALY_05000272 (1)
 /* Writes to Synchronous SDRAM Memory May Be Lost */
@@ -165,14 +165,14 @@
 /* New Feature: Additional PPI Frame Sync Sampling Options (Not Available On Older Silicon) */
 #define ANOMALY_05000306 (__SILICON_REVISION__ < 5)
 /* SCKELOW Bit Does Not Maintain State Through Hibernate */
-#define ANOMALY_05000307 (1)
+#define ANOMALY_05000307 (1)	/* note: brokenness is noted in documentation, not anomaly sheet */
 /* False Hardware Errors Caused by Fetches at the Boundary of Reserved Memory */
 #define ANOMALY_05000310 (1)
 /* Erroneous Flag (GPIO) Pin Operations under Specific Sequences */
 #define ANOMALY_05000311 (__SILICON_REVISION__ < 6)
 /* Errors When SSYNC, CSYNC, or Loads to LT, LB and LC Registers Are Interrupted */
 #define ANOMALY_05000312 (__SILICON_REVISION__ < 6)
-/* PPI Is Level-Sensitive on First Transfer */
+/* PPI Is Level-Sensitive on First Transfer In Single Frame Sync Modes */
 #define ANOMALY_05000313 (__SILICON_REVISION__ < 6)
 /* Killed System MMR Write Completes Erroneously On Next System MMR Access */
 #define ANOMALY_05000315 (__SILICON_REVISION__ < 6)
@@ -200,17 +200,63 @@
 #define ANOMALY_05000426 (1)
 /* IFLUSH Instruction at End of Hardware Loop Causes Infinite Stall */
 #define ANOMALY_05000443 (1)
+/* False Hardware Error when RETI points to invalid memory */
+#define ANOMALY_05000461 (1)
 
 /* These anomalies have been "phased" out of analog.com anomaly sheets and are
  * here to show running on older silicon just isn't feasible.
  */
 
+/* Internal voltage regulator can't be modified via register writes */
+#define ANOMALY_05000066 (__SILICON_REVISION__ < 2)
 /* Watchpoints (Hardware Breakpoints) are not supported */
 #define ANOMALY_05000067 (__SILICON_REVISION__ < 3)
+/* SDRAM PSSE bit cannot be set again after SDRAM Powerup */
+#define ANOMALY_05000070 (__SILICON_REVISION__ < 2)
+/* Writing FIO_DIR can corrupt a programmable flag's data */
+#define ANOMALY_05000079 (__SILICON_REVISION__ < 2)
+/* Timer Auto-Baud Mode requires the UART clock to be enabled */
+#define ANOMALY_05000086 (__SILICON_REVISION__ < 2)
+/* Internal Clocking Modes on SPORT0 not supported */
+#define ANOMALY_05000088 (__SILICON_REVISION__ < 2)
+/* Internal voltage regulator does not wake up from an RTC wakeup */
+#define ANOMALY_05000092 (__SILICON_REVISION__ < 2)
+/* The IFLUSH instruction must be preceded by a CSYNC instruction */
+#define ANOMALY_05000093 (__SILICON_REVISION__ < 2)
+/* Vectoring to an instruction that is presently being filled into the instruction cache may cause erroneous behavior */
+#define ANOMALY_05000095 (__SILICON_REVISION__ < 2)
+/* PREFETCH, FLUSH, and FLUSHINV must be followed by a CSYNC */
+#define ANOMALY_05000096 (__SILICON_REVISION__ < 2)
+/* Performance Monitor 0 and 1 are swapped when monitoring memory events */
+#define ANOMALY_05000097 (__SILICON_REVISION__ < 2)
+/* 32-bit SPORT DMA will be word reversed */
+#define ANOMALY_05000098 (__SILICON_REVISION__ < 2)
+/* Incorrect status in the UART_IIR register */
+#define ANOMALY_05000100 (__SILICON_REVISION__ < 2)
+/* Reading X_MODIFY or Y_MODIFY while DMA channel is active */
+#define ANOMALY_05000101 (__SILICON_REVISION__ < 2)
+/* Descriptor-based MemDMA may lock up with 32-bit transfers or if transfers span 64KB buffers */
+#define ANOMALY_05000102 (__SILICON_REVISION__ < 2)
+/* Incorrect value written to the cycle counters */
+#define ANOMALY_05000103 (__SILICON_REVISION__ < 2)
+/* Stores to L1 Data memory incorrect when a specific sequence is followed */
+#define ANOMALY_05000104 (__SILICON_REVISION__ < 2)
+/* Programmable Flag (PF3) functionality not supported in all PPI modes */
+#define ANOMALY_05000106 (__SILICON_REVISION__ < 2)
+/* Data store can be lost when targeting a cache line fill */
+#define ANOMALY_05000107 (__SILICON_REVISION__ < 2)
 /* Reserved bits in SYSCFG register not set at power on */
 #define ANOMALY_05000109 (__SILICON_REVISION__ < 3)
+/* Infinite Core Stall */
+#define ANOMALY_05000114 (__SILICON_REVISION__ < 2)
+/* PPI_FSx may glitch when generated by the on chip Timers */
+#define ANOMALY_05000115 (__SILICON_REVISION__ < 2)
 /* Trace Buffers may record discontinuities into emulation mode and/or exception, NMI, reset handlers */
 #define ANOMALY_05000116 (__SILICON_REVISION__ < 3)
+/* DTEST registers allow access to Data Cache when DTEST_COMMAND< 14 >= 0 */
+#define ANOMALY_05000117 (__SILICON_REVISION__ < 2)
+/* Booting from an 8-bit or 24-bit Addressable SPI device is not supported */
+#define ANOMALY_05000118 (__SILICON_REVISION__ < 2)
 /* DTEST_COMMAND initiated memory access may be incorrect if data cache or DMA is active */
 #define ANOMALY_05000123 (__SILICON_REVISION__ < 3)
 /* DMA Lock-up at CCLK to SCLK ratios of 4:1, 2:1, or 1:1 */
@@ -222,7 +268,9 @@
 /* DMEM_CONTROL is not set on Reset */
 #define ANOMALY_05000137 (__SILICON_REVISION__ < 3)
 /* SPI boot will not complete if there is a zero fill block in the loader file */
-#define ANOMALY_05000138 (__SILICON_REVISION__ < 3)
+#define ANOMALY_05000138 (__SILICON_REVISION__ == 2)
+/* Timerx_Config must be set for using the PPI in GP output mode with internal Frame Syncs */
+#define ANOMALY_05000139 (__SILICON_REVISION__ < 2)
 /* Allowing the SPORT RX FIFO to fill will cause an overflow */
 #define ANOMALY_05000140 (__SILICON_REVISION__ < 3)
 /* An Infinite Stall occurs with a particular sequence of consecutive dual dag events */
@@ -237,17 +285,17 @@
 #define ANOMALY_05000145 (__SILICON_REVISION__ < 3)
 /* MDMA may lose the first few words of a descriptor chain */
 #define ANOMALY_05000146 (__SILICON_REVISION__ < 3)
-/* The source MDMA descriptor may stop with a DMA Error */
+/* Source MDMA descriptor may stop with a DMA Error near beginning of descriptor fetch */
 #define ANOMALY_05000147 (__SILICON_REVISION__ < 3)
 /* When booting from a 16-bit asynchronous memory device, the upper 8-bits of each word must be 0x00 */
 #define ANOMALY_05000148 (__SILICON_REVISION__ < 3)
 /* Frame Delay in SPORT Multichannel Mode */
 #define ANOMALY_05000153 (__SILICON_REVISION__ < 3)
-/* SPORT TFS signal is active in Multi-channel mode outside of valid channels */
+/* SPORT TFS signal stays active in multichannel mode outside of valid channels */
 #define ANOMALY_05000154 (__SILICON_REVISION__ < 3)
 /* Timer1 can not be used for PWMOUT mode when a certain PPI mode is in use */
 #define ANOMALY_05000155 (__SILICON_REVISION__ < 3)
-/* A killed 32-bit System MMR write will lead to the next system MMR access thinking it should be 32-bit. */
+/* Killed 32-bit MMR write leads to next system MMR access thinking it should be 32-bit */
 #define ANOMALY_05000157 (__SILICON_REVISION__ < 3)
 /* SPORT transmit data is not gated by external frame sync in certain conditions */
 #define ANOMALY_05000163 (__SILICON_REVISION__ < 3)
@@ -275,15 +323,27 @@
 #define ANOMALY_05000206 (__SILICON_REVISION__ < 3)
 
 /* Anomalies that don't exist on this proc */
+#define ANOMALY_05000120 (0)
+#define ANOMALY_05000149 (0)
+#define ANOMALY_05000171 (0)
+#define ANOMALY_05000220 (0)
+#define ANOMALY_05000248 (0)
 #define ANOMALY_05000266 (0)
+#define ANOMALY_05000274 (0)
+#define ANOMALY_05000287 (0)
 #define ANOMALY_05000323 (0)
 #define ANOMALY_05000353 (1)
+#define ANOMALY_05000362 (1)
 #define ANOMALY_05000380 (0)
 #define ANOMALY_05000386 (1)
+#define ANOMALY_05000389 (0)
 #define ANOMALY_05000412 (0)
+#define ANOMALY_05000430 (0)
 #define ANOMALY_05000432 (0)
 #define ANOMALY_05000435 (0)
 #define ANOMALY_05000447 (0)
 #define ANOMALY_05000448 (0)
+#define ANOMALY_05000456 (0)
+#define ANOMALY_05000450 (0)
 
 #endif

arch/blackfin/mach-bf537/Kconfig

@@ -66,6 +66,7 @@ config IRQ_MAC_TX
 	default 11
 config IRQ_TIMER0
 	int "IRQ_TIMER0"
+	default 7 if TICKSOURCE_GPTMR0
 	default 8
 config IRQ_TIMER1
 	int "IRQ_TIMER1"

arch/blackfin/mach-bf537/boards/cm_bf537.c

@@ -86,7 +86,7 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE)
+#if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE)
 /* SPI ADC chip */
 static struct bfin5xx_spi_chip spi_adc_chip_info = {
 	.enable_dma = 1,         /* use dma transfer with this chip*/
@@ -129,7 +129,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 	},
 #endif
 
-#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE)
+#if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE)
 	{
 		.modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
 		.max_speed_hz = 6250000,     /* max spi clock (SCK) speed in HZ */

arch/blackfin/mach-bf537/boards/pnav10.c

@@ -265,8 +265,8 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_SPI_ADC_BF533) \
-	|| defined(CONFIG_SPI_ADC_BF533_MODULE)
+#if defined(CONFIG_BFIN_SPI_ADC) \
+	|| defined(CONFIG_BFIN_SPI_ADC_MODULE)
 /* SPI ADC chip */
 static struct bfin5xx_spi_chip spi_adc_chip_info = {
 	.enable_dma = 1,         /* use dma transfer with this chip*/
@@ -333,8 +333,8 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 	},
 #endif
 
-#if defined(CONFIG_SPI_ADC_BF533) \
-	|| defined(CONFIG_SPI_ADC_BF533_MODULE)
+#if defined(CONFIG_BFIN_SPI_ADC) \
+	|| defined(CONFIG_BFIN_SPI_ADC_MODULE)
 	{
 		.modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
 		.max_speed_hz = 6250000,     /* max spi clock (SCK) speed in HZ */

arch/blackfin/mach-bf537/boards/stamp.c

@@ -508,8 +508,8 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_SPI_ADC_BF533) \
-	|| defined(CONFIG_SPI_ADC_BF533_MODULE)
+#if defined(CONFIG_BFIN_SPI_ADC) \
+	|| defined(CONFIG_BFIN_SPI_ADC_MODULE)
 /* SPI ADC chip */
 static struct bfin5xx_spi_chip spi_adc_chip_info = {
 	.enable_dma = 1,         /* use dma transfer with this chip*/
@@ -607,6 +607,43 @@ static const struct ad7879_platform_data bfin_ad7879_ts_info = {
 };
 #endif
 
+#if defined(CONFIG_INPUT_ADXL34X) || defined(CONFIG_INPUT_ADXL34X_MODULE)
+#include <linux/input.h>
+#include <linux/spi/adxl34x.h>
+static const struct adxl34x_platform_data adxl34x_info = {
+	.x_axis_offset = 0,
+	.y_axis_offset = 0,
+	.z_axis_offset = 0,
+	.tap_threshold = 0x31,
+	.tap_duration = 0x10,
+	.tap_latency = 0x60,
+	.tap_window = 0xF0,
+	.tap_axis_control = ADXL_TAP_X_EN | ADXL_TAP_Y_EN | ADXL_TAP_Z_EN,
+	.act_axis_control = 0xFF,
+	.activity_threshold = 5,
+	.inactivity_threshold = 3,
+	.inactivity_time = 4,
+	.free_fall_threshold = 0x7,
+	.free_fall_time = 0x20,
+	.data_rate = 0x8,
+	.data_range = ADXL_FULL_RES,
+
+	.ev_type = EV_ABS,
+	.ev_code_x = ABS_X,		/* EV_REL */
+	.ev_code_y = ABS_Y,		/* EV_REL */
+	.ev_code_z = ABS_Z,		/* EV_REL */
+
+	.ev_code_tap_x = BTN_TOUCH,		/* EV_KEY */
+	.ev_code_tap_y = BTN_TOUCH,		/* EV_KEY */
+	.ev_code_tap_z = BTN_TOUCH,		/* EV_KEY */
+
+/*	.ev_code_ff = KEY_F,*/		/* EV_KEY */
+/*	.ev_code_act_inactivity = KEY_A,*/	/* EV_KEY */
+	.power_mode = ADXL_AUTO_SLEEP | ADXL_LINK,
+	.fifo_mode = ADXL_FIFO_STREAM,
+};
+#endif
+
 #if defined(CONFIG_TOUCHSCREEN_AD7879_SPI) || defined(CONFIG_TOUCHSCREEN_AD7879_SPI_MODULE)
 static struct bfin5xx_spi_chip spi_ad7879_chip_info = {
 	.enable_dma = 0,
@@ -695,8 +732,8 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 		.mode = SPI_MODE_3,
 	},
 #endif
-#if defined(CONFIG_SPI_ADC_BF533) \
-	|| defined(CONFIG_SPI_ADC_BF533_MODULE)
+#if defined(CONFIG_BFIN_SPI_ADC) \
+	|| defined(CONFIG_BFIN_SPI_ADC_MODULE)
 	{
 		.modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
 		.max_speed_hz = 6250000,     /* max spi clock (SCK) speed in HZ */
@@ -1280,7 +1317,7 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
 		.irq = IRQ_PF5,
 	},
 #endif
-#if defined(CONFIG_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
+#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
 	{
 		I2C_BOARD_INFO("pcf8574_lcd", 0x22),
 	},
@@ -1312,6 +1349,13 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
 		.platform_data = (void *)&adp5520_pdev_data,
 	},
 #endif
+#if defined(CONFIG_INPUT_ADXL34X_I2C) || defined(CONFIG_INPUT_ADXL34X_I2C_MODULE)
+	{
+		I2C_BOARD_INFO("adxl34x", 0x53),
+		.irq = IRQ_PG3,
+		.platform_data = (void *)&adxl34x_info,
+	},
+#endif
 };
 
 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
@@ -1358,16 +1402,18 @@ static struct resource bfin_pata_resources[] = {
 static struct pata_platform_info bfin_pata_platform_data = {
 	.ioport_shift = 0,
 };
-
+/* CompactFlash Storage Card Memory Mapped Adressing
+ * /REG = A11 = 1
+ */
 static struct resource bfin_pata_resources[] = {
 	{
-		.start = 0x20211820,
-		.end = 0x2021183F,
+		.start = 0x20211800,
+		.end = 0x20211807,
 		.flags = IORESOURCE_MEM,
 	},
 	{
-		.start = 0x2021181C,
-		.end = 0x2021181F,
+		.start = 0x2021180E,	/* Device Ctl */
+		.end = 0x2021180E,
 		.flags = IORESOURCE_MEM,
 	},
 };
@@ -1527,7 +1573,8 @@ static int __init stamp_init(void)
 	platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
 	spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
 
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
+#if (defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)) \
+	 && defined(PATA_INT)
 	irq_desc[PATA_INT].status |= IRQ_NOAUTOEN;
 #endif
 

arch/blackfin/mach-bf537/boards/tcm_bf537.c

@@ -86,7 +86,7 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE)
+#if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE)
 /* SPI ADC chip */
 static struct bfin5xx_spi_chip spi_adc_chip_info = {
 	.enable_dma = 1,         /* use dma transfer with this chip*/
@@ -129,7 +129,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 	},
 #endif
 
-#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE)
+#if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE)
 	{
 		.modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
 		.max_speed_hz = 6250000,     /* max spi clock (SCK) speed in HZ */

arch/blackfin/mach-bf537/include/mach/anomaly.h

@@ -6,7 +6,7 @@
  * Licensed under the GPL-2 or later.
  */
 
-/* This file shoule be up to date with:
+/* This file should be up to date with:
  *  - Revision D, 09/18/2008; ADSP-BF534/ADSP-BF536/ADSP-BF537 Blackfin Processor Anomaly List
  */
 
@@ -36,77 +36,75 @@
 
 /* Multi-issue instruction with dsp32shiftimm in slot1 and P-reg store in slot 2 not supported */
 #define ANOMALY_05000074 (1)
-/* DMA_RUN bit is not valid after a Peripheral Receive Channel DMA stops */
+/* DMA_RUN Bit Is Not Valid after a Peripheral Receive Channel DMA Stops */
 #define ANOMALY_05000119 (1)
-/* Rx.H cannot be used to access 16-bit System MMR registers */
+/* Rx.H Cannot Be Used to Access 16-bit System MMR Registers */
 #define ANOMALY_05000122 (1)
 /* Killed 32-bit MMR write leads to next system MMR access thinking it should be 32-bit */
 #define ANOMALY_05000157 (__SILICON_REVISION__ < 2)
-/* Turning SPORTs on while External Frame Sync Is Active May Corrupt Data */
-#define ANOMALY_05000167 (1)
-/* PPI_DELAY not functional in PPI modes with 0 frame syncs */
+/* PPI_DELAY Not Functional in PPI Modes with 0 Frame Syncs */
 #define ANOMALY_05000180 (1)
 /* Instruction Cache Is Not Functional */
 #define ANOMALY_05000237 (__SILICON_REVISION__ < 2)
-/* If i-cache is on, CSYNC/SSYNC/IDLE around Change of Control causes failures */
+/* If I-Cache Is On, CSYNC/SSYNC/IDLE Around Change of Control Causes Failures */
 #define ANOMALY_05000244 (__SILICON_REVISION__ < 3)
-/* Spurious Hardware Error from an access in the shadow of a conditional branch */
+/* False Hardware Error from an Access in the Shadow of a Conditional Branch */
 #define ANOMALY_05000245 (1)
 /* CLKIN Buffer Output Enable Reset Behavior Is Changed */
 #define ANOMALY_05000247 (1)
-/* Incorrect Bit-Shift of Data Word in Multichannel (TDM) mode in certain conditions */
+/* Incorrect Bit Shift of Data Word in Multichannel (TDM) Mode in Certain Conditions */
 #define ANOMALY_05000250 (__SILICON_REVISION__ < 3)
 /* EMAC Tx DMA error after an early frame abort */
 #define ANOMALY_05000252 (__SILICON_REVISION__ < 3)
-/* Maximum external clock speed for Timers */
+/* Maximum External Clock Speed for Timers */
 #define ANOMALY_05000253 (__SILICON_REVISION__ < 3)
-/* Incorrect Timer Pulse Width in Single-Shot PWM_OUT mode with external clock */
+/* Incorrect Timer Pulse Width in Single-Shot PWM_OUT Mode with External Clock */
 #define ANOMALY_05000254 (__SILICON_REVISION__ > 2)
-/* Entering Hibernate Mode with RTC Seconds event interrupt not functional */
+/* Entering Hibernate State with RTC Seconds Interrupt Not Functional */
 #define ANOMALY_05000255 (__SILICON_REVISION__ < 3)
 /* EMAC MDIO input latched on wrong MDC edge */
 #define ANOMALY_05000256 (__SILICON_REVISION__ < 3)
-/* Interrupt/Exception during short hardware loop may cause bad instruction fetches */
+/* Interrupt/Exception During Short Hardware Loop May Cause Bad Instruction Fetches */
 #define ANOMALY_05000257 (__SILICON_REVISION__ < 3)
-/* Instruction Cache is corrupted when bits 9 and 12 of the ICPLB Data registers differ */
+/* Instruction Cache Is Corrupted When Bits 9 and 12 of the ICPLB Data Registers Differ */
 #define ANOMALY_05000258 (((ANOMALY_BF536 || ANOMALY_BF537) && __SILICON_REVISION__ == 1) || __SILICON_REVISION__ == 2)
-/* ICPLB_STATUS MMR register may be corrupted */
+/* ICPLB_STATUS MMR Register May Be Corrupted */
 #define ANOMALY_05000260 (__SILICON_REVISION__ == 2)
-/* DCPLB_FAULT_ADDR MMR register may be corrupted */
+/* DCPLB_FAULT_ADDR MMR Register May Be Corrupted */
 #define ANOMALY_05000261 (__SILICON_REVISION__ < 3)
-/* Stores to data cache may be lost */
+/* Stores To Data Cache May Be Lost */
 #define ANOMALY_05000262 (__SILICON_REVISION__ < 3)
-/* Hardware loop corrupted when taking an ICPLB exception */
+/* Hardware Loop Corrupted When Taking an ICPLB Exception */
 #define ANOMALY_05000263 (__SILICON_REVISION__ == 2)
-/* CSYNC/SSYNC/IDLE causes infinite stall in second to last instruction in hardware loop */
+/* CSYNC/SSYNC/IDLE Causes Infinite Stall in Penultimate Instruction in Hardware Loop */
 #define ANOMALY_05000264 (__SILICON_REVISION__ < 3)
-/* Sensitivity to noise with slow input edge rates on external SPORT TX and RX clocks */
+/* Sensitivity To Noise with Slow Input Edge Rates on External SPORT TX and RX Clocks */
 #define ANOMALY_05000265 (1)
 /* Memory DMA error when peripheral DMA is running with non-zero DEB_TRAFFIC_PERIOD */
 #define ANOMALY_05000268 (__SILICON_REVISION__ < 3)
-/* High I/O activity causes output voltage of internal voltage regulator (VDDint) to decrease */
+/* High I/O Activity Causes Output Voltage of Internal Voltage Regulator (Vddint) to Decrease */
 #define ANOMALY_05000270 (__SILICON_REVISION__ < 3)
-/* Certain data cache write through modes fail for VDDint <=0.9V */
+/* Certain Data Cache Writethrough Modes Fail for Vddint <= 0.9V */
 #define ANOMALY_05000272 (1)
-/* Writes to Synchronous SDRAM memory may be lost */
+/* Writes to Synchronous SDRAM Memory May Be Lost */
 #define ANOMALY_05000273 (__SILICON_REVISION__ < 3)
-/* Writes to an I/O data register one SCLK cycle after an edge is detected may clear interrupt */
+/* Writes to an I/O Data Register One SCLK Cycle after an Edge Is Detected May Clear Interrupt */
 #define ANOMALY_05000277 (__SILICON_REVISION__ < 3)
-/* Disabling Peripherals with DMA running may cause DMA system instability */
+/* Disabling Peripherals with DMA Running May Cause DMA System Instability */
 #define ANOMALY_05000278 (((ANOMALY_BF536 || ANOMALY_BF537) && __SILICON_REVISION__ < 3) || (ANOMALY_BF534 && __SILICON_REVISION__ < 2))
 /* SPI Master boot mode does not work well with Atmel Data flash devices */
 #define ANOMALY_05000280 (1)
-/* False Hardware Error Exception when ISR context is not restored */
+/* False Hardware Error Exception When ISR Context Is Not Restored */
 #define ANOMALY_05000281 (__SILICON_REVISION__ < 3)
-/* Memory DMA corruption with 32-bit data and traffic control */
+/* Memory DMA Corruption with 32-Bit Data and Traffic Control */
 #define ANOMALY_05000282 (__SILICON_REVISION__ < 3)
 /* System MMR Write Is Stalled Indefinitely When Killed in a Particular Stage */
 #define ANOMALY_05000283 (__SILICON_REVISION__ < 3)
 /* New Feature: EMAC TX DMA Word Alignment (Not Available On Older Silicon) */
 #define ANOMALY_05000285 (__SILICON_REVISION__ < 3)
-/* SPORTs may receive bad data if FIFOs fill up */
+/* SPORTs May Receive Bad Data If FIFOs Fill Up */
 #define ANOMALY_05000288 (__SILICON_REVISION__ < 3)
-/* Memory to memory DMA source/destination descriptors must be in same memory space */
+/* Memory-To-Memory DMA Source/Destination Descriptors Must Be in Same Memory Space */
 #define ANOMALY_05000301 (1)
 /* SSYNCs After Writes To CAN/DMA MMR Registers Are Not Always Handled Correctly */
 #define ANOMALY_05000304 (__SILICON_REVISION__ < 3)
@@ -116,11 +114,11 @@
 #define ANOMALY_05000307 (__SILICON_REVISION__ < 3)
 /* Writing UART_THR while UART clock is disabled sends erroneous start bit */
 #define ANOMALY_05000309 (__SILICON_REVISION__ < 3)
-/* False hardware errors caused by fetches at the boundary of reserved memory */
+/* False Hardware Errors Caused by Fetches at the Boundary of Reserved Memory */
 #define ANOMALY_05000310 (1)
-/* Errors when SSYNC, CSYNC, or loads to LT, LB and LC registers are interrupted */
+/* Errors When SSYNC, CSYNC, or Loads to LT, LB and LC Registers Are Interrupted */
 #define ANOMALY_05000312 (1)
-/* PPI is level sensitive on first transfer */
+/* PPI Is Level-Sensitive on First Transfer In Single Frame Sync Modes */
 #define ANOMALY_05000313 (1)
 /* Killed System MMR Write Completes Erroneously On Next System MMR Access */
 #define ANOMALY_05000315 (__SILICON_REVISION__ < 3)
@@ -156,24 +154,46 @@
 #define ANOMALY_05000426 (1)
 /* IFLUSH Instruction at End of Hardware Loop Causes Infinite Stall */
 #define ANOMALY_05000443 (1)
+/* False Hardware Error when RETI points to invalid memory */
+#define ANOMALY_05000461 (1)
 
 /* Anomalies that don't exist on this proc */
+#define ANOMALY_05000099 (0)
+#define ANOMALY_05000120 (0)
 #define ANOMALY_05000125 (0)
+#define ANOMALY_05000149 (0)
 #define ANOMALY_05000158 (0)
+#define ANOMALY_05000171 (0)
+#define ANOMALY_05000179 (0)
 #define ANOMALY_05000183 (0)
 #define ANOMALY_05000198 (0)
+#define ANOMALY_05000215 (0)
+#define ANOMALY_05000220 (0)
+#define ANOMALY_05000227 (0)
 #define ANOMALY_05000230 (0)
+#define ANOMALY_05000231 (0)
+#define ANOMALY_05000233 (0)
+#define ANOMALY_05000242 (0)
+#define ANOMALY_05000248 (0)
 #define ANOMALY_05000266 (0)
+#define ANOMALY_05000274 (0)
+#define ANOMALY_05000287 (0)
 #define ANOMALY_05000311 (0)
 #define ANOMALY_05000323 (0)
 #define ANOMALY_05000353 (1)
+#define ANOMALY_05000362 (1)
 #define ANOMALY_05000363 (0)
 #define ANOMALY_05000380 (0)
 #define ANOMALY_05000386 (1)
+#define ANOMALY_05000389 (0)
+#define ANOMALY_05000400 (0)
 #define ANOMALY_05000412 (0)
+#define ANOMALY_05000430 (0)
 #define ANOMALY_05000432 (0)
 #define ANOMALY_05000435 (0)
 #define ANOMALY_05000447 (0)
 #define ANOMALY_05000448 (0)
+#define ANOMALY_05000456 (0)
+#define ANOMALY_05000450 (0)
 
 #endif

arch/blackfin/mach-bf538/Kconfig

@@ -57,6 +57,7 @@ config IRQ_UART0_TX
 	default 10
 config IRQ_TIMER0
 	int "IRQ_TIMER0"
+	default 7 if TICKSOURCE_GPTMR0
 	default 8
 config IRQ_TIMER1
 	int "IRQ_TIMER1"

arch/blackfin/mach-bf538/include/mach/anomaly.h

@@ -6,7 +6,7 @@
  * Licensed under the GPL-2 or later.
  */
 
-/* This file shoule be up to date with:
+/* This file should be up to date with:
  *  - Revision G, 09/18/2008; ADSP-BF538/BF538F Blackfin Processor Anomaly List
  *  - Revision L, 09/18/2008; ADSP-BF539/BF539F Blackfin Processor Anomaly List
  */
@@ -14,17 +14,29 @@
 #ifndef _MACH_ANOMALY_H_
 #define _MACH_ANOMALY_H_
 
+/* We do not support old silicon - sorry */
 #if __SILICON_REVISION__ < 4
-# error will not work on BF538 silicon version 0.0, 0.1, 0.2, or 0.3
+# error will not work on BF538/BF539 silicon version 0.0, 0.1, 0.2, or 0.3
 #endif
 
-/* Multi-Issue Instruction with dsp32shiftimm in slot1 and P-reg Store in slot2 Not Supported */
+#if defined(__ADSPBF538__)
+# define ANOMALY_BF538 1
+#else
+# define ANOMALY_BF538 0
+#endif
+#if defined(__ADSPBF539__)
+# define ANOMALY_BF539 1
+#else
+# define ANOMALY_BF539 0
+#endif
+
+/* Multi-issue instruction with dsp32shiftimm in slot1 and P-reg store in slot 2 not supported */
 #define ANOMALY_05000074 (1)
 /* DMA_RUN Bit Is Not Valid after a Peripheral Receive Channel DMA Stops */
 #define ANOMALY_05000119 (1)
 /* Rx.H Cannot Be Used to Access 16-bit System MMR Registers */
 #define ANOMALY_05000122 (1)
-/* PPI Data Lengths between 8 and 16 Do Not Zero Out Upper Bits */
+/* PPI Data Lengths Between 8 and 16 Do Not Zero Out Upper Bits */
 #define ANOMALY_05000166 (1)
 /* PPI_COUNT Cannot Be Programmed to 0 in General Purpose TX or RX Modes */
 #define ANOMALY_05000179 (1)
@@ -40,13 +52,13 @@
 #define ANOMALY_05000229 (1)
 /* PPI_FS3 Is Not Driven in 2 or 3 Internal Frame Sync Transmit Modes */
 #define ANOMALY_05000233 (1)
-/* If i-cache is on, CSYNC/SSYNC/IDLE around Change of Control causes failures */
+/* If I-Cache Is On, CSYNC/SSYNC/IDLE Around Change of Control Causes Failures */
 #define ANOMALY_05000244 (__SILICON_REVISION__ < 3)
-/* Spurious Hardware Error from an Access in the Shadow of a Conditional Branch */
+/* False Hardware Error from an Access in the Shadow of a Conditional Branch */
 #define ANOMALY_05000245 (1)
 /* Maximum External Clock Speed for Timers */
 #define ANOMALY_05000253 (1)
-/* DCPLB_FAULT_ADDR MMR register may be corrupted */
+/* DCPLB_FAULT_ADDR MMR Register May Be Corrupted */
 #define ANOMALY_05000261 (__SILICON_REVISION__ < 3)
 /* High I/O Activity Causes Output Voltage of Internal Voltage Regulator (Vddint) to Decrease */
 #define ANOMALY_05000270 (__SILICON_REVISION__ < 4)
@@ -58,11 +70,11 @@
 #define ANOMALY_05000277 (__SILICON_REVISION__ < 4)
 /* Disabling Peripherals with DMA Running May Cause DMA System Instability */
 #define ANOMALY_05000278 (__SILICON_REVISION__ < 4)
-/* False Hardware Error Exception when ISR Context Is Not Restored */
+/* False Hardware Error Exception When ISR Context Is Not Restored */
 #define ANOMALY_05000281 (__SILICON_REVISION__ < 4)
 /* Memory DMA Corruption with 32-Bit Data and Traffic Control */
 #define ANOMALY_05000282 (__SILICON_REVISION__ < 4)
-/* System MMR Write Is Stalled Indefinitely when Killed in a Particular Stage */
+/* System MMR Write Is Stalled Indefinitely When Killed in a Particular Stage */
 #define ANOMALY_05000283 (__SILICON_REVISION__ < 4)
 /* SPORTs May Receive Bad Data If FIFOs Fill Up */
 #define ANOMALY_05000288 (__SILICON_REVISION__ < 4)
@@ -80,14 +92,14 @@
 #define ANOMALY_05000307 (__SILICON_REVISION__ < 4)
 /* False Hardware Errors Caused by Fetches at the Boundary of Reserved Memory */
 #define ANOMALY_05000310 (1)
-/* Errors when SSYNC, CSYNC, or Loads to LT, LB and LC Registers Are Interrupted */
+/* Errors When SSYNC, CSYNC, or Loads to LT, LB and LC Registers Are Interrupted */
 #define ANOMALY_05000312 (__SILICON_REVISION__ < 5)
-/* PPI Is Level-Sensitive on First Transfer */
+/* PPI Is Level-Sensitive on First Transfer In Single Frame Sync Modes */
 #define ANOMALY_05000313 (__SILICON_REVISION__ < 4)
-/* Killed System MMR Write Completes Erroneously on Next System MMR Access */
+/* Killed System MMR Write Completes Erroneously On Next System MMR Access */
 #define ANOMALY_05000315 (__SILICON_REVISION__ < 4)
 /* PFx Glitch on Write to FIO_FLAG_D or FIO_FLAG_T */
-#define ANOMALY_05000318 (__SILICON_REVISION__ < 4)
+#define ANOMALY_05000318 (ANOMALY_BF539 && __SILICON_REVISION__ < 4)
 /* Regulator Programming Blocked when Hibernate Wakeup Source Remains Active */
 #define ANOMALY_05000355 (__SILICON_REVISION__ < 5)
 /* Serial Port (SPORT) Multichannel Transmit Failure when Channel 0 Is Disabled */
@@ -114,23 +126,45 @@
 #define ANOMALY_05000436 (__SILICON_REVISION__ > 3)
 /* IFLUSH Instruction at End of Hardware Loop Causes Infinite Stall */
 #define ANOMALY_05000443 (1)
+/* False Hardware Error when RETI points to invalid memory */
+#define ANOMALY_05000461 (1)
 
 /* Anomalies that don't exist on this proc */
+#define ANOMALY_05000099 (0)
+#define ANOMALY_05000120 (0)
+#define ANOMALY_05000149 (0)
 #define ANOMALY_05000158 (0)
+#define ANOMALY_05000171 (0)
 #define ANOMALY_05000198 (0)
+#define ANOMALY_05000215 (0)
+#define ANOMALY_05000220 (0)
+#define ANOMALY_05000227 (0)
 #define ANOMALY_05000230 (0)
+#define ANOMALY_05000231 (0)
+#define ANOMALY_05000242 (0)
+#define ANOMALY_05000248 (0)
+#define ANOMALY_05000250 (0)
+#define ANOMALY_05000254 (0)
 #define ANOMALY_05000263 (0)
+#define ANOMALY_05000274 (0)
+#define ANOMALY_05000287 (0)
 #define ANOMALY_05000305 (0)
 #define ANOMALY_05000311 (0)
 #define ANOMALY_05000323 (0)
 #define ANOMALY_05000353 (1)
+#define ANOMALY_05000362 (1)
 #define ANOMALY_05000363 (0)
 #define ANOMALY_05000380 (0)
 #define ANOMALY_05000386 (1)
+#define ANOMALY_05000389 (0)
+#define ANOMALY_05000400 (0)
 #define ANOMALY_05000412 (0)
+#define ANOMALY_05000430 (0)
 #define ANOMALY_05000432 (0)
 #define ANOMALY_05000435 (0)
 #define ANOMALY_05000447 (0)
 #define ANOMALY_05000448 (0)
+#define ANOMALY_05000456 (0)
+#define ANOMALY_05000450 (0)
 
 #endif

arch/blackfin/mach-bf538/include/mach/blackfin.h

@@ -68,25 +68,6 @@
 #define OFFSET_SCR              0x1C	/* SCR Scratch Register                 */
 #define OFFSET_GCTL             0x24	/* Global Control Register              */
 
-
-#define bfin_write_MDMA_D0_IRQ_STATUS	bfin_write_MDMA0_D0_IRQ_STATUS
-#define bfin_write_MDMA_D0_START_ADDR   bfin_write_MDMA0_D0_START_ADDR
-#define bfin_write_MDMA_S0_START_ADDR   bfin_write_MDMA0_S0_START_ADDR
-#define bfin_write_MDMA_D0_X_COUNT      bfin_write_MDMA0_D0_X_COUNT
-#define bfin_write_MDMA_S0_X_COUNT      bfin_write_MDMA0_S0_X_COUNT
-#define bfin_write_MDMA_D0_Y_COUNT      bfin_write_MDMA0_D0_Y_COUNT
-#define bfin_write_MDMA_S0_Y_COUNT      bfin_write_MDMA0_S0_Y_COUNT
-#define bfin_write_MDMA_D0_X_MODIFY     bfin_write_MDMA0_D0_X_MODIFY
-#define bfin_write_MDMA_S0_X_MODIFY     bfin_write_MDMA0_S0_X_MODIFY
-#define bfin_write_MDMA_D0_Y_MODIFY     bfin_write_MDMA0_D0_Y_MODIFY
-#define bfin_write_MDMA_S0_Y_MODIFY     bfin_write_MDMA0_S0_Y_MODIFY
-#define bfin_write_MDMA_S0_CONFIG       bfin_write_MDMA0_S0_CONFIG
-#define bfin_write_MDMA_D0_CONFIG       bfin_write_MDMA0_D0_CONFIG
-#define bfin_read_MDMA_S0_CONFIG        bfin_read_MDMA0_S0_CONFIG
-#define bfin_read_MDMA_D0_IRQ_STATUS    bfin_read_MDMA0_D0_IRQ_STATUS
-#define bfin_write_MDMA_S0_IRQ_STATUS   bfin_write_MDMA0_S0_IRQ_STATUS
-
-
 /* DPMC*/
 #define bfin_read_STOPCK_OFF() bfin_read_STOPCK()
 #define bfin_write_STOPCK_OFF(val) bfin_write_STOPCK(val)

arch/blackfin/mach-bf538/include/mach/cdefBF538.h

@@ -67,14 +67,14 @@
 #define bfin_write_SIC_ISR0(val)       bfin_write32(SIC_ISR0, val)
 #define bfin_read_SIC_ISR1()           bfin_read32(SIC_ISR1)
 #define bfin_write_SIC_ISR1(val)       bfin_write32(SIC_ISR1, val)
-#define bfin_read_SIC_ISR(x)	       bfin_read32(SIC_ISR0 + x * (SIC_ISR1 - SIC_ISR0))
+#define bfin_read_SIC_ISR(x)           bfin_read32(SIC_ISR0 + x * (SIC_ISR1 - SIC_ISR0))
 #define bfin_write_SIC_ISR(x, val)     bfin_write32(SIC_ISR0 + x * (SIC_ISR1 - SIC_ISR0), val)
 #define bfin_read_SIC_IWR0()           bfin_read32(SIC_IWR0)
 #define bfin_write_SIC_IWR0(val)       bfin_write32(SIC_IWR0, val)
 #define bfin_read_SIC_IWR1()           bfin_read32(SIC_IWR1)
 #define bfin_write_SIC_IWR1(val)       bfin_write32(SIC_IWR1, val)
-#define bfin_read_SIC_IWR(x)	       bfin_read32(SIC_IWR0 + x * (SIC_IWR1 - SIC_IWR0))
-#define bfin_write_SIC_IWR(x, val)     bfin_write32((SIC_IWR0 + x * (SIC_IWR1 - SIC_IWR0), val)
+#define bfin_read_SIC_IWR(x)           bfin_read32(SIC_IWR0 + x * (SIC_IWR1 - SIC_IWR0))
+#define bfin_write_SIC_IWR(x, val)     bfin_write32(SIC_IWR0 + x * (SIC_IWR1 - SIC_IWR0), val)
 #define bfin_read_SIC_IAR0()           bfin_read32(SIC_IAR0)
 #define bfin_write_SIC_IAR0(val)       bfin_write32(SIC_IAR0, val)
 #define bfin_read_SIC_IAR1()           bfin_read32(SIC_IAR1)
@@ -1247,6 +1247,65 @@
 #define bfin_write_MDMA1_S1_CURR_X_COUNT(val) bfin_write16(MDMA1_S1_CURR_X_COUNT, val)
 #define bfin_read_MDMA1_S1_CURR_Y_COUNT() bfin_read16(MDMA1_S1_CURR_Y_COUNT)
 #define bfin_write_MDMA1_S1_CURR_Y_COUNT(val) bfin_write16(MDMA1_S1_CURR_Y_COUNT, val)
+
+#define bfin_read_MDMA_S0_CONFIG()  bfin_read_MDMA0_S0_CONFIG()
+#define bfin_write_MDMA_S0_CONFIG(val) bfin_write_MDMA0_S0_CONFIG(val)
+#define bfin_read_MDMA_S0_IRQ_STATUS()  bfin_read_MDMA0_S0_IRQ_STATUS()
+#define bfin_write_MDMA_S0_IRQ_STATUS(val) bfin_write_MDMA0_S0_IRQ_STATUS(val)
+#define bfin_read_MDMA_S0_X_MODIFY()  bfin_read_MDMA0_S0_X_MODIFY()
+#define bfin_write_MDMA_S0_X_MODIFY(val) bfin_write_MDMA0_S0_X_MODIFY(val)
+#define bfin_read_MDMA_S0_Y_MODIFY()  bfin_read_MDMA0_S0_Y_MODIFY()
+#define bfin_write_MDMA_S0_Y_MODIFY(val) bfin_write_MDMA0_S0_Y_MODIFY(val)
+#define bfin_read_MDMA_S0_X_COUNT()  bfin_read_MDMA0_S0_X_COUNT()
+#define bfin_write_MDMA_S0_X_COUNT(val) bfin_write_MDMA0_S0_X_COUNT(val)
+#define bfin_read_MDMA_S0_Y_COUNT()  bfin_read_MDMA0_S0_Y_COUNT()
+#define bfin_write_MDMA_S0_Y_COUNT(val) bfin_write_MDMA0_S0_Y_COUNT(val)
+#define bfin_read_MDMA_S0_START_ADDR()  bfin_read_MDMA0_S0_START_ADDR()
+#define bfin_write_MDMA_S0_START_ADDR(val) bfin_write_MDMA0_S0_START_ADDR(val)
+#define bfin_read_MDMA_D0_CONFIG()  bfin_read_MDMA0_D0_CONFIG()
+#define bfin_write_MDMA_D0_CONFIG(val) bfin_write_MDMA0_D0_CONFIG(val)
+#define bfin_read_MDMA_D0_IRQ_STATUS()  bfin_read_MDMA0_D0_IRQ_STATUS()
+#define bfin_write_MDMA_D0_IRQ_STATUS(val) bfin_write_MDMA0_D0_IRQ_STATUS(val)
+#define bfin_read_MDMA_D0_X_MODIFY()  bfin_read_MDMA0_D0_X_MODIFY()
+#define bfin_write_MDMA_D0_X_MODIFY(val) bfin_write_MDMA0_D0_X_MODIFY(val)
+#define bfin_read_MDMA_D0_Y_MODIFY()  bfin_read_MDMA0_D0_Y_MODIFY()
+#define bfin_write_MDMA_D0_Y_MODIFY(val) bfin_write_MDMA0_D0_Y_MODIFY(val)
+#define bfin_read_MDMA_D0_X_COUNT()  bfin_read_MDMA0_D0_X_COUNT()
+#define bfin_write_MDMA_D0_X_COUNT(val) bfin_write_MDMA0_D0_X_COUNT(val)
+#define bfin_read_MDMA_D0_Y_COUNT()  bfin_read_MDMA0_D0_Y_COUNT()
+#define bfin_write_MDMA_D0_Y_COUNT(val) bfin_write_MDMA0_D0_Y_COUNT(val)
+#define bfin_read_MDMA_D0_START_ADDR()  bfin_read_MDMA0_D0_START_ADDR()
+#define bfin_write_MDMA_D0_START_ADDR(val) bfin_write_MDMA0_D0_START_ADDR(val)
+
+#define bfin_read_MDMA_S1_CONFIG()  bfin_read_MDMA0_S1_CONFIG()
+#define bfin_write_MDMA_S1_CONFIG(val) bfin_write_MDMA0_S1_CONFIG(val)
+#define bfin_read_MDMA_S1_IRQ_STATUS()  bfin_read_MDMA0_S1_IRQ_STATUS()
+#define bfin_write_MDMA_S1_IRQ_STATUS(val) bfin_write_MDMA0_S1_IRQ_STATUS(val)
+#define bfin_read_MDMA_S1_X_MODIFY()  bfin_read_MDMA0_S1_X_MODIFY()
+#define bfin_write_MDMA_S1_X_MODIFY(val) bfin_write_MDMA0_S1_X_MODIFY(val)
+#define bfin_read_MDMA_S1_Y_MODIFY()  bfin_read_MDMA0_S1_Y_MODIFY()
+#define bfin_write_MDMA_S1_Y_MODIFY(val) bfin_write_MDMA0_S1_Y_MODIFY(val)
+#define bfin_read_MDMA_S1_X_COUNT()  bfin_read_MDMA0_S1_X_COUNT()
+#define bfin_write_MDMA_S1_X_COUNT(val) bfin_write_MDMA0_S1_X_COUNT(val)
+#define bfin_read_MDMA_S1_Y_COUNT()  bfin_read_MDMA0_S1_Y_COUNT()
+#define bfin_write_MDMA_S1_Y_COUNT(val) bfin_write_MDMA0_S1_Y_COUNT(val)
+#define bfin_read_MDMA_S1_START_ADDR()  bfin_read_MDMA0_S1_START_ADDR()
+#define bfin_write_MDMA_S1_START_ADDR(val) bfin_write_MDMA0_S1_START_ADDR(val)
+#define bfin_read_MDMA_D1_CONFIG()  bfin_read_MDMA0_D1_CONFIG()
+#define bfin_write_MDMA_D1_CONFIG(val) bfin_write_MDMA0_D1_CONFIG(val)
+#define bfin_read_MDMA_D1_IRQ_STATUS()  bfin_read_MDMA0_D1_IRQ_STATUS()
+#define bfin_write_MDMA_D1_IRQ_STATUS(val) bfin_write_MDMA0_D1_IRQ_STATUS(val)
+#define bfin_read_MDMA_D1_X_MODIFY()  bfin_read_MDMA0_D1_X_MODIFY()
+#define bfin_write_MDMA_D1_X_MODIFY(val) bfin_write_MDMA0_D1_X_MODIFY(val)
+#define bfin_read_MDMA_D1_Y_MODIFY()  bfin_read_MDMA0_D1_Y_MODIFY()
+#define bfin_write_MDMA_D1_Y_MODIFY(val) bfin_write_MDMA0_D1_Y_MODIFY(val)
+#define bfin_read_MDMA_D1_X_COUNT()  bfin_read_MDMA0_D1_X_COUNT()
+#define bfin_write_MDMA_D1_X_COUNT(val) bfin_write_MDMA0_D1_X_COUNT(val)
+#define bfin_read_MDMA_D1_Y_COUNT()  bfin_read_MDMA0_D1_Y_COUNT()
+#define bfin_write_MDMA_D1_Y_COUNT(val) bfin_write_MDMA0_D1_Y_COUNT(val)
+#define bfin_read_MDMA_D1_START_ADDR()  bfin_read_MDMA0_D1_START_ADDR()
+#define bfin_write_MDMA_D1_START_ADDR(val) bfin_write_MDMA0_D1_START_ADDR(val)
+
 #define bfin_read_PPI_CONTROL()        bfin_read16(PPI_CONTROL)
 #define bfin_write_PPI_CONTROL(val)    bfin_write16(PPI_CONTROL, val)
 #define bfin_read_PPI_STATUS()         bfin_read16(PPI_STATUS)

arch/blackfin/mach-bf538/include/mach/defBF539.h

@@ -412,6 +412,62 @@
 #define	MDMA0_S1_CURR_X_COUNT	0xFFC00EF0	/* MemDMA0 Stream 1 Source Current X Count Register */
 #define	MDMA0_S1_CURR_Y_COUNT	0xFFC00EF8	/* MemDMA0 Stream 1 Source Current Y Count Register */
 
+#define MDMA_D0_NEXT_DESC_PTR MDMA0_D0_NEXT_DESC_PTR
+#define MDMA_D0_START_ADDR MDMA0_D0_START_ADDR
+#define MDMA_D0_CONFIG MDMA0_D0_CONFIG
+#define MDMA_D0_X_COUNT MDMA0_D0_X_COUNT
+#define MDMA_D0_X_MODIFY MDMA0_D0_X_MODIFY
+#define MDMA_D0_Y_COUNT MDMA0_D0_Y_COUNT
+#define MDMA_D0_Y_MODIFY MDMA0_D0_Y_MODIFY
+#define MDMA_D0_CURR_DESC_PTR MDMA0_D0_CURR_DESC_PTR
+#define MDMA_D0_CURR_ADDR MDMA0_D0_CURR_ADDR
+#define MDMA_D0_IRQ_STATUS MDMA0_D0_IRQ_STATUS
+#define MDMA_D0_PERIPHERAL_MAP MDMA0_D0_PERIPHERAL_MAP
+#define MDMA_D0_CURR_X_COUNT MDMA0_D0_CURR_X_COUNT
+#define MDMA_D0_CURR_Y_COUNT MDMA0_D0_CURR_Y_COUNT
+
+#define MDMA_S0_NEXT_DESC_PTR MDMA0_S0_NEXT_DESC_PTR
+#define MDMA_S0_START_ADDR MDMA0_S0_START_ADDR
+#define MDMA_S0_CONFIG MDMA0_S0_CONFIG
+#define MDMA_S0_X_COUNT MDMA0_S0_X_COUNT
+#define MDMA_S0_X_MODIFY MDMA0_S0_X_MODIFY
+#define MDMA_S0_Y_COUNT MDMA0_S0_Y_COUNT
+#define MDMA_S0_Y_MODIFY MDMA0_S0_Y_MODIFY
+#define MDMA_S0_CURR_DESC_PTR MDMA0_S0_CURR_DESC_PTR
+#define MDMA_S0_CURR_ADDR MDMA0_S0_CURR_ADDR
+#define MDMA_S0_IRQ_STATUS MDMA0_S0_IRQ_STATUS
+#define MDMA_S0_PERIPHERAL_MAP MDMA0_S0_PERIPHERAL_MAP
+#define MDMA_S0_CURR_X_COUNT MDMA0_S0_CURR_X_COUNT
+#define MDMA_S0_CURR_Y_COUNT MDMA0_S0_CURR_Y_COUNT
+
+#define MDMA_D1_NEXT_DESC_PTR MDMA0_D1_NEXT_DESC_PTR
+#define MDMA_D1_START_ADDR MDMA0_D1_START_ADDR
+#define MDMA_D1_CONFIG MDMA0_D1_CONFIG
+#define MDMA_D1_X_COUNT MDMA0_D1_X_COUNT
+#define MDMA_D1_X_MODIFY MDMA0_D1_X_MODIFY
+#define MDMA_D1_Y_COUNT MDMA0_D1_Y_COUNT
+#define MDMA_D1_Y_MODIFY MDMA0_D1_Y_MODIFY
+#define MDMA_D1_CURR_DESC_PTR MDMA0_D1_CURR_DESC_PTR
+#define MDMA_D1_CURR_ADDR MDMA0_D1_CURR_ADDR
+#define MDMA_D1_IRQ_STATUS MDMA0_D1_IRQ_STATUS
+#define MDMA_D1_PERIPHERAL_MAP MDMA0_D1_PERIPHERAL_MAP
+#define MDMA_D1_CURR_X_COUNT MDMA0_D1_CURR_X_COUNT
+#define MDMA_D1_CURR_Y_COUNT MDMA0_D1_CURR_Y_COUNT
+
+#define MDMA_S1_NEXT_DESC_PTR MDMA0_S1_NEXT_DESC_PTR
+#define MDMA_S1_START_ADDR MDMA0_S1_START_ADDR
+#define MDMA_S1_CONFIG MDMA0_S1_CONFIG
+#define MDMA_S1_X_COUNT MDMA0_S1_X_COUNT
+#define MDMA_S1_X_MODIFY MDMA0_S1_X_MODIFY
+#define MDMA_S1_Y_COUNT MDMA0_S1_Y_COUNT
+#define MDMA_S1_Y_MODIFY MDMA0_S1_Y_MODIFY
+#define MDMA_S1_CURR_DESC_PTR MDMA0_S1_CURR_DESC_PTR
+#define MDMA_S1_CURR_ADDR MDMA0_S1_CURR_ADDR
+#define MDMA_S1_IRQ_STATUS MDMA0_S1_IRQ_STATUS
+#define MDMA_S1_PERIPHERAL_MAP MDMA0_S1_PERIPHERAL_MAP
+#define MDMA_S1_CURR_X_COUNT MDMA0_S1_CURR_X_COUNT
+#define MDMA_S1_CURR_Y_COUNT MDMA0_S1_CURR_Y_COUNT
+
 
 /* Parallel Peripheral Interface (PPI) (0xFFC01000 - 0xFFC010FF) */
 #define	PPI_CONTROL			0xFFC01000	/* PPI Control Register */

arch/blackfin/mach-bf548/Kconfig

@@ -11,6 +11,13 @@ config DEB_DMA_URGENT
 	help
 	  Treat any DEB1, DEB2 and DEB3 request as Urgent
 
+config BF548_ATAPI_ALTERNATIVE_PORT
+	bool "BF548 ATAPI alternative port via GPIO"
+	help
+	  BF548 ATAPI data and address PINs can be routed through
+	  async address or GPIO port F and G. Select y to route it
+	  to GPIO.
+
 comment "Interrupt Priority Assignment"
 menu "Priority"
 
@@ -250,6 +257,7 @@ config IRQ_OTPSEC
 	default 11
 config IRQ_TIMER0
 	int "IRQ_TIMER0"
+	default 7 if TICKSOURCE_GPTMR0
 	default 8
 config IRQ_TIMER1
 	int "IRQ_TIMER1"

arch/blackfin/mach-bf548/boards/ezkit.c

@@ -208,6 +208,43 @@ static struct platform_device bfin_rotary_device = {
 };
 #endif
 
+#if defined(CONFIG_INPUT_ADXL34X) || defined(CONFIG_INPUT_ADXL34X_MODULE)
+#include <linux/input.h>
+#include <linux/spi/adxl34x.h>
+static const struct adxl34x_platform_data adxl34x_info = {
+	.x_axis_offset = 0,
+	.y_axis_offset = 0,
+	.z_axis_offset = 0,
+	.tap_threshold = 0x31,
+	.tap_duration = 0x10,
+	.tap_latency = 0x60,
+	.tap_window = 0xF0,
+	.tap_axis_control = ADXL_TAP_X_EN | ADXL_TAP_Y_EN | ADXL_TAP_Z_EN,
+	.act_axis_control = 0xFF,
+	.activity_threshold = 5,
+	.inactivity_threshold = 3,
+	.inactivity_time = 4,
+	.free_fall_threshold = 0x7,
+	.free_fall_time = 0x20,
+	.data_rate = 0x8,
+	.data_range = ADXL_FULL_RES,
+
+	.ev_type = EV_ABS,
+	.ev_code_x = ABS_X,		/* EV_REL */
+	.ev_code_y = ABS_Y,		/* EV_REL */
+	.ev_code_z = ABS_Z,		/* EV_REL */
+
+	.ev_code_tap_x = BTN_TOUCH,		/* EV_KEY */
+	.ev_code_tap_y = BTN_TOUCH,		/* EV_KEY */
+	.ev_code_tap_z = BTN_TOUCH,		/* EV_KEY */
+
+/*	.ev_code_ff = KEY_F,*/		/* EV_KEY */
+/*	.ev_code_act_inactivity = KEY_A,*/	/* EV_KEY */
+	.power_mode = ADXL_AUTO_SLEEP | ADXL_LINK,
+	.fifo_mode = ADXL_FIFO_STREAM,
+};
+#endif
+
 #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
 static struct platform_device rtc_device = {
 	.name = "rtc-bfin",
@@ -628,6 +665,14 @@ static struct bfin5xx_spi_chip spidev_chip_info = {
 };
 #endif
 
+#if defined(CONFIG_INPUT_ADXL34X_SPI) || defined(CONFIG_INPUT_ADXL34X_SPI_MODULE)
+static struct bfin5xx_spi_chip spi_adxl34x_chip_info = {
+	.enable_dma = 0,         /* use dma transfer with this chip*/
+	.bits_per_word = 8,
+	.cs_change_per_word = 0,
+};
+#endif
+
 static struct spi_board_info bfin_spi_board_info[] __initdata = {
 #if defined(CONFIG_MTD_M25P80) \
 	|| defined(CONFIG_MTD_M25P80_MODULE)
@@ -653,15 +698,15 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 	},
 #endif
 #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
-{
-	.modalias		= "ad7877",
-	.platform_data		= &bfin_ad7877_ts_info,
-	.irq			= IRQ_PB4,	/* old boards (<=Rev 1.3) use IRQ_PJ11 */
-	.max_speed_hz		= 12500000,     /* max spi clock (SCK) speed in HZ */
-	.bus_num		= 0,
-	.chip_select  		= 2,
-	.controller_data = &spi_ad7877_chip_info,
-},
+	{
+		.modalias		= "ad7877",
+		.platform_data		= &bfin_ad7877_ts_info,
+		.irq			= IRQ_PB4,	/* old boards (<=Rev 1.3) use IRQ_PJ11 */
+		.max_speed_hz		= 12500000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num		= 0,
+		.chip_select  		= 2,
+		.controller_data = &spi_ad7877_chip_info,
+	},
 #endif
 #if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
 	{
@@ -672,8 +717,19 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 		.controller_data = &spidev_chip_info,
 	},
 #endif
+#if defined(CONFIG_INPUT_ADXL34X_SPI) || defined(CONFIG_INPUT_ADXL34X_SPI_MODULE)
+	{
+		.modalias		= "adxl34x",
+		.platform_data		= &adxl34x_info,
+		.irq			= IRQ_PC5,
+		.max_speed_hz		= 5000000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num		= 1,
+		.chip_select  		= 2,
+		.controller_data = &spi_adxl34x_chip_info,
+		.mode = SPI_MODE_3,
+	},
+#endif
 };
-
 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
 /* SPI (0) */
 static struct resource bfin_spi0_resource[] = {
@@ -786,7 +842,7 @@ static struct i2c_board_info __initdata bfin_i2c_board_info0[] = {
 
 #if !defined(CONFIG_BF542)	/* The BF542 only has 1 TWI */
 static struct i2c_board_info __initdata bfin_i2c_board_info1[] = {
-#if defined(CONFIG_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
+#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
 	{
 		I2C_BOARD_INFO("pcf8574_lcd", 0x22),
 	},
@@ -797,6 +853,13 @@ static struct i2c_board_info __initdata bfin_i2c_board_info1[] = {
 		.irq = 212,
 	},
 #endif
+#if defined(CONFIG_INPUT_ADXL34X_I2C) || defined(CONFIG_INPUT_ADXL34X_I2C_MODULE)
+	{
+		I2C_BOARD_INFO("adxl34x", 0x53),
+		.irq = IRQ_PC5,
+		.platform_data = (void *)&adxl34x_info,
+	},
+#endif
 };
 #endif
 

arch/blackfin/mach-bf548/include/mach/anomaly.h

@@ -6,26 +6,31 @@
  * Licensed under the GPL-2 or later.
  */
 
-/* This file shoule be up to date with:
+/* This file should be up to date with:
  *  - Revision H, 01/16/2009; ADSP-BF542/BF544/BF547/BF548/BF549 Blackfin Processor Anomaly List
  */
 
 #ifndef _MACH_ANOMALY_H_
 #define _MACH_ANOMALY_H_
 
-/* Multi-Issue Instruction with dsp32shiftimm in slot1 and P-reg Store in slot2 Not Supported */
+/* We do not support 0.0 or 0.1 silicon - sorry */
+#if __SILICON_REVISION__ < 2
+# error will not work on BF548 silicon version 0.0, or 0.1
+#endif
+
+/* Multi-issue instruction with dsp32shiftimm in slot1 and P-reg store in slot 2 not supported */
 #define ANOMALY_05000074 (1)
 /* DMA_RUN Bit Is Not Valid after a Peripheral Receive Channel DMA Stops */
 #define ANOMALY_05000119 (1)
 /* Rx.H Cannot Be Used to Access 16-bit System MMR Registers */
 #define ANOMALY_05000122 (1)
-/* Spurious Hardware Error from an Access in the Shadow of a Conditional Branch */
+/* False Hardware Error from an Access in the Shadow of a Conditional Branch */
 #define ANOMALY_05000245 (1)
 /* Sensitivity To Noise with Slow Input Edge Rates on External SPORT TX and RX Clocks */
 #define ANOMALY_05000265 (1)
 /* Certain Data Cache Writethrough Modes Fail for Vddint <= 0.9V */
 #define ANOMALY_05000272 (1)
-/* False Hardware Error Exception when ISR context is not restored */
+/* False Hardware Error Exception When ISR Context Is Not Restored */
 #define ANOMALY_05000281 (__SILICON_REVISION__ < 1)
 /* SSYNCs After Writes To CAN/DMA MMR Registers Are Not Always Handled Correctly */
 #define ANOMALY_05000304 (__SILICON_REVISION__ < 1)
@@ -59,7 +64,7 @@
 #define ANOMALY_05000340 (__SILICON_REVISION__ < 1)
 /* Boot Host Wait (HWAIT) and Boot Host Wait Alternate (HWAITA) Signals Are Swapped */
 #define ANOMALY_05000344 (__SILICON_REVISION__ < 1)
-/* USB Calibration Value Is Not Intialized */
+/* USB Calibration Value Is Not Initialized */
 #define ANOMALY_05000346 (__SILICON_REVISION__ < 1)
 /* USB Calibration Value to use */
 #define ANOMALY_05000346_value 0x5411
@@ -147,11 +152,11 @@
 #define ANOMALY_05000416 (1)
 /* Multichannel SPORT Channel Misalignment Under Specific Configuration */
 #define ANOMALY_05000425 (1)
-/* Speculative Fetches of Indirect-Pointer Instructions Can Cause Spurious Hardware Errors */
+/* Speculative Fetches of Indirect-Pointer Instructions Can Cause False Hardware Errors */
 #define ANOMALY_05000426 (1)
 /* CORE_EPPI_PRIO bit and SYS_EPPI_PRIO bit in the HMDMA1_CONTROL register are not functional */
 #define ANOMALY_05000427 (__SILICON_REVISION__ < 2)
-/* WB_EDGE Bit in NFC_IRQSTAT Incorrectly Behaves as a Buffer Status Bit Instead of an IRQ Status Bit */
+/* WB_EDGE Bit in NFC_IRQSTAT Incorrectly Reflects Buffer Status Instead of IRQ Status */
 #define ANOMALY_05000429 (__SILICON_REVISION__ < 2)
 /* Software System Reset Corrupts PLL_LOCKCNT Register */
 #define ANOMALY_05000430 (__SILICON_REVISION__ >= 2)
@@ -170,26 +175,49 @@
 /* Reduced Timing Margins on DDR Output Setup and Hold (tDS and tDH) */
 #define ANOMALY_05000449 (__SILICON_REVISION__ == 1)
 /* USB DMA Mode 1 Short Packet Data Corruption */
-#define ANOMALY_05000450 (1
+#define ANOMALY_05000450 (1)
+/* USB Receive Interrupt Is Not Generated in DMA Mode 1 */
+#define ANOMALY_05000456 (__SILICON_REVISION__ < 3)
+/* False Hardware Error when RETI points to invalid memory */
+#define ANOMALY_05000461 (1)
 
 /* Anomalies that don't exist on this proc */
+#define ANOMALY_05000099 (0)
+#define ANOMALY_05000120 (0)
 #define ANOMALY_05000125 (0)
+#define ANOMALY_05000149 (0)
 #define ANOMALY_05000158 (0)
+#define ANOMALY_05000171 (0)
+#define ANOMALY_05000179 (0)
 #define ANOMALY_05000183 (0)
 #define ANOMALY_05000198 (0)
+#define ANOMALY_05000215 (0)
+#define ANOMALY_05000220 (0)
+#define ANOMALY_05000227 (0)
 #define ANOMALY_05000230 (0)
+#define ANOMALY_05000231 (0)
+#define ANOMALY_05000233 (0)
+#define ANOMALY_05000242 (0)
 #define ANOMALY_05000244 (0)
+#define ANOMALY_05000248 (0)
+#define ANOMALY_05000250 (0)
+#define ANOMALY_05000254 (0)
 #define ANOMALY_05000261 (0)
 #define ANOMALY_05000263 (0)
 #define ANOMALY_05000266 (0)
 #define ANOMALY_05000273 (0)
+#define ANOMALY_05000274 (0)
 #define ANOMALY_05000278 (0)
+#define ANOMALY_05000287 (0)
+#define ANOMALY_05000301 (0)
 #define ANOMALY_05000305 (0)
 #define ANOMALY_05000307 (0)
 #define ANOMALY_05000311 (0)
 #define ANOMALY_05000323 (0)
+#define ANOMALY_05000362 (1)
 #define ANOMALY_05000363 (0)
 #define ANOMALY_05000380 (0)
+#define ANOMALY_05000400 (0)
 #define ANOMALY_05000412 (0)
 #define ANOMALY_05000432 (0)
 #define ANOMALY_05000435 (0)

arch/blackfin/mach-bf548/include/mach/portmux.h

@@ -167,22 +167,42 @@
 #define P_PPI0_D13	(P_DEFINED | P_IDENT(GPIO_PF13) | P_FUNCT(0))
 #define P_PPI0_D14	(P_DEFINED | P_IDENT(GPIO_PF14) | P_FUNCT(0))
 #define P_PPI0_D15	(P_DEFINED | P_IDENT(GPIO_PF15) | P_FUNCT(0))
-#define P_ATAPI_D0A	(P_DEFINED | P_IDENT(GPIO_PF0) | P_FUNCT(1))
-#define P_ATAPI_D1A	(P_DEFINED | P_IDENT(GPIO_PF1) | P_FUNCT(1))
-#define P_ATAPI_D2A	(P_DEFINED | P_IDENT(GPIO_PF2) | P_FUNCT(1))
-#define P_ATAPI_D3A	(P_DEFINED | P_IDENT(GPIO_PF3) | P_FUNCT(1))
-#define P_ATAPI_D4A	(P_DEFINED | P_IDENT(GPIO_PF4) | P_FUNCT(1))
-#define P_ATAPI_D5A	(P_DEFINED | P_IDENT(GPIO_PF5) | P_FUNCT(1))
-#define P_ATAPI_D6A	(P_DEFINED | P_IDENT(GPIO_PF6) | P_FUNCT(1))
-#define P_ATAPI_D7A	(P_DEFINED | P_IDENT(GPIO_PF7) | P_FUNCT(1))
-#define P_ATAPI_D8A	(P_DEFINED | P_IDENT(GPIO_PF8) | P_FUNCT(1))
-#define P_ATAPI_D9A	(P_DEFINED | P_IDENT(GPIO_PF9) | P_FUNCT(1))
-#define P_ATAPI_D10A	(P_DEFINED | P_IDENT(GPIO_PF10) | P_FUNCT(1))
-#define P_ATAPI_D11A	(P_DEFINED | P_IDENT(GPIO_PF11) | P_FUNCT(1))
-#define P_ATAPI_D12A	(P_DEFINED | P_IDENT(GPIO_PF12) | P_FUNCT(1))
-#define P_ATAPI_D13A	(P_DEFINED | P_IDENT(GPIO_PF13) | P_FUNCT(1))
-#define P_ATAPI_D14A	(P_DEFINED | P_IDENT(GPIO_PF14) | P_FUNCT(1))
-#define P_ATAPI_D15A	(P_DEFINED | P_IDENT(GPIO_PF15) | P_FUNCT(1))
+
+#ifdef CONFIG_BF548_ATAPI_ALTERNATIVE_PORT
+# define P_ATAPI_D0A	(P_DEFINED | P_IDENT(GPIO_PF0) | P_FUNCT(1))
+# define P_ATAPI_D1A	(P_DEFINED | P_IDENT(GPIO_PF1) | P_FUNCT(1))
+# define P_ATAPI_D2A	(P_DEFINED | P_IDENT(GPIO_PF2) | P_FUNCT(1))
+# define P_ATAPI_D3A	(P_DEFINED | P_IDENT(GPIO_PF3) | P_FUNCT(1))
+# define P_ATAPI_D4A	(P_DEFINED | P_IDENT(GPIO_PF4) | P_FUNCT(1))
+# define P_ATAPI_D5A	(P_DEFINED | P_IDENT(GPIO_PF5) | P_FUNCT(1))
+# define P_ATAPI_D6A	(P_DEFINED | P_IDENT(GPIO_PF6) | P_FUNCT(1))
+# define P_ATAPI_D7A	(P_DEFINED | P_IDENT(GPIO_PF7) | P_FUNCT(1))
+# define P_ATAPI_D8A	(P_DEFINED | P_IDENT(GPIO_PF8) | P_FUNCT(1))
+# define P_ATAPI_D9A	(P_DEFINED | P_IDENT(GPIO_PF9) | P_FUNCT(1))
+# define P_ATAPI_D10A	(P_DEFINED | P_IDENT(GPIO_PF10) | P_FUNCT(1))
+# define P_ATAPI_D11A	(P_DEFINED | P_IDENT(GPIO_PF11) | P_FUNCT(1))
+# define P_ATAPI_D12A	(P_DEFINED | P_IDENT(GPIO_PF12) | P_FUNCT(1))
+# define P_ATAPI_D13A	(P_DEFINED | P_IDENT(GPIO_PF13) | P_FUNCT(1))
+# define P_ATAPI_D14A	(P_DEFINED | P_IDENT(GPIO_PF14) | P_FUNCT(1))
+# define P_ATAPI_D15A	(P_DEFINED | P_IDENT(GPIO_PF15) | P_FUNCT(1))
+#else
+# define P_ATAPI_D0A	(P_DONTCARE)
+# define P_ATAPI_D1A	(P_DONTCARE)
+# define P_ATAPI_D2A	(P_DONTCARE)
+# define P_ATAPI_D3A	(P_DONTCARE)
+# define P_ATAPI_D4A	(P_DONTCARE)
+# define P_ATAPI_D5A	(P_DONTCARE)
+# define P_ATAPI_D6A	(P_DONTCARE)
+# define P_ATAPI_D7A	(P_DONTCARE)
+# define P_ATAPI_D8A	(P_DONTCARE)
+# define P_ATAPI_D9A	(P_DONTCARE)
+# define P_ATAPI_D10A	(P_DONTCARE)
+# define P_ATAPI_D11A	(P_DONTCARE)
+# define P_ATAPI_D12A	(P_DONTCARE)
+# define P_ATAPI_D13A	(P_DONTCARE)
+# define P_ATAPI_D14A	(P_DONTCARE)
+# define P_ATAPI_D15A	(P_DONTCARE)
+#endif
 
 #define P_PPI0_CLK	(P_DEFINED | P_IDENT(GPIO_PG0) | P_FUNCT(0))
 #define P_PPI0_FS1	(P_DEFINED | P_IDENT(GPIO_PG1) | P_FUNCT(0))
@@ -200,9 +220,15 @@
 #define P_CAN0_RX	(P_DEFINED | P_IDENT(GPIO_PG13) | P_FUNCT(0))
 #define P_CAN1_TX	(P_DEFINED | P_IDENT(GPIO_PG14) | P_FUNCT(0))
 #define P_CAN1_RX	(P_DEFINED | P_IDENT(GPIO_PG15) | P_FUNCT(0))
-#define P_ATAPI_A0A	(P_DEFINED | P_IDENT(GPIO_PG2) | P_FUNCT(1))
-#define P_ATAPI_A1A	(P_DEFINED | P_IDENT(GPIO_PG3) | P_FUNCT(1))
-#define P_ATAPI_A2A	(P_DEFINED | P_IDENT(GPIO_PG4) | P_FUNCT(1))
+#ifdef CONFIG_BF548_ATAPI_ALTERNATIVE_PORT
+# define P_ATAPI_A0A	(P_DEFINED | P_IDENT(GPIO_PG2) | P_FUNCT(1))
+# define P_ATAPI_A1A	(P_DEFINED | P_IDENT(GPIO_PG3) | P_FUNCT(1))
+# define P_ATAPI_A2A	(P_DEFINED | P_IDENT(GPIO_PG4) | P_FUNCT(1))
+#else
+# define P_ATAPI_A0A	(P_DONTCARE)
+# define P_ATAPI_A1A	(P_DONTCARE)
+# define P_ATAPI_A2A	(P_DONTCARE)
+#endif
 #define P_HOST_CE	(P_DEFINED | P_IDENT(GPIO_PG5) | P_FUNCT(1))
 #define P_HOST_RD	(P_DEFINED | P_IDENT(GPIO_PG6) | P_FUNCT(1))
 #define P_HOST_WR	(P_DEFINED | P_IDENT(GPIO_PG7) | P_FUNCT(1))

arch/blackfin/mach-bf561/Kconfig

@@ -9,22 +9,9 @@ if (!SMP)
 comment "Core B Support"
 
 config BF561_COREB
-	bool "Enable Core B support"
+	bool "Enable Core B loader"
 	default y
 
-config BF561_COREB_RESET
-	bool "Enable Core B reset support"
-	default n
-	help
-	  This requires code in the application that is loaded
-	  into Core B. In order to reset, the application needs
-	  to install an interrupt handler for Supplemental
-	  Interrupt 0, that sets RETI to 0xff600000 and writes
-	  bit 11 of SICB_SYSCR when bit 5 of SICA_SYSCR is 0.
-	  This causes Core B to stall when Supplemental Interrupt
-	  0 is set, and will reset PC to 0xff600000 when
-	  COREB_SRAM_INIT is cleared.
-
 endif
 
 comment "Interrupt Priority Assignment"
@@ -138,6 +125,7 @@ config IRQ_DMA2_11
 	default 9
 config IRQ_TIMER0
 	int "TIMER 0  Interrupt"
+	default 7 if TICKSOURCE_GPTMR0
 	default 8
 config IRQ_TIMER1
 	int "TIMER 1  Interrupt"

arch/blackfin/mach-bf561/boards/cm_bf561.c

@@ -83,7 +83,7 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE)
+#if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE)
 /* SPI ADC chip */
 static struct bfin5xx_spi_chip spi_adc_chip_info = {
 	.enable_dma = 1,         /* use dma transfer with this chip*/
@@ -126,7 +126,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 	},
 #endif
 
-#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE)
+#if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE)
 	{
 		.modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
 		.max_speed_hz = 6250000,     /* max spi clock (SCK) speed in HZ */

arch/blackfin/mach-bf561/coreb.c

@@ -1,406 +1,74 @@
-/*
- * File:         arch/blackfin/mach-bf561/coreb.c
- * Based on:
- * Author:
+/* Load firmware into Core B on a BF561
  *
- * Created:
- * Description:  Handle CoreB on a BF561
- *
- * Modified:
- *               Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Copyright 2004-2009 Analog Devices Inc.
+ * Licensed under the GPL-2 or later.
+ */
+
+/* The Core B reset func requires code in the application that is loaded into
+ * Core B.  In order to reset, the application needs to install an interrupt
+ * handler for Supplemental Interrupt 0, that sets RETI to 0xff600000 and
+ * writes bit 11 of SICB_SYSCR when bit 5 of SICA_SYSCR is 0.  This causes Core
+ * B to stall when Supplemental Interrupt 0 is set, and will reset PC to
+ * 0xff600000 when COREB_SRAM_INIT is cleared.
  */
 
-#include <linux/mm.h>
-#include <linux/miscdevice.h>
 #include <linux/device.h>
-#include <linux/ioport.h>
-#include <linux/module.h>
-#include <linux/uaccess.h>
 #include <linux/fs.h>
-#include <asm/dma.h>
-#include <asm/cacheflush.h>
-
-#define MODULE_VER		"v0.1"
-
-static spinlock_t coreb_lock;
-static wait_queue_head_t coreb_dma_wait;
-
-#define COREB_IS_OPEN		0x00000001
-#define COREB_IS_RUNNING	0x00000010
+#include <linux/kernel.h>
+#include <linux/miscdevice.h>
+#include <linux/module.h>
 
-#define CMD_COREB_INDEX		1
 #define CMD_COREB_START		2
 #define CMD_COREB_STOP		3
 #define CMD_COREB_RESET		4
 
-#define COREB_MINOR		229
-
-static unsigned long coreb_status = 0;
-static unsigned long coreb_base = 0xff600000;
-static unsigned long coreb_size = 0x4000;
-int coreb_dma_done;
-
-static loff_t coreb_lseek(struct file *file, loff_t offset, int origin);
-static ssize_t coreb_read(struct file *file, char *buf, size_t count,
-			  loff_t * ppos);
-static ssize_t coreb_write(struct file *file, const char *buf, size_t count,
-			   loff_t * ppos);
-static int coreb_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
-		       unsigned long arg);
-static int coreb_open(struct inode *inode, struct file *file);
-static int coreb_release(struct inode *inode, struct file *file);
-
-static irqreturn_t coreb_dma_interrupt(int irq, void *dev_id)
-{
-	clear_dma_irqstat(CH_MEM_STREAM2_DEST);
-	coreb_dma_done = 1;
-	wake_up_interruptible(&coreb_dma_wait);
-	return IRQ_HANDLED;
-}
-
-static ssize_t coreb_write(struct file *file, const char *buf, size_t count,
-			   loff_t * ppos)
-{
-	unsigned long p = *ppos;
-	ssize_t wrote = 0;
-
-	if (p + count > coreb_size)
-		return -EFAULT;
-
-	while (count > 0) {
-		int len = count;
-
-		if (len > PAGE_SIZE)
-			len = PAGE_SIZE;
-
-		coreb_dma_done = 0;
-
-		flush_dcache_range((unsigned long)buf, (unsigned long)(buf+len));
-		/* Source Channel */
-		set_dma_start_addr(CH_MEM_STREAM2_SRC, (unsigned long)buf);
-		set_dma_x_count(CH_MEM_STREAM2_SRC, len);
-		set_dma_x_modify(CH_MEM_STREAM2_SRC, sizeof(char));
-		set_dma_config(CH_MEM_STREAM2_SRC, 0);
-		/* Destination Channel */
-		set_dma_start_addr(CH_MEM_STREAM2_DEST, coreb_base + p);
-		set_dma_x_count(CH_MEM_STREAM2_DEST, len);
-		set_dma_x_modify(CH_MEM_STREAM2_DEST, sizeof(char));
-		set_dma_config(CH_MEM_STREAM2_DEST, WNR | RESTART | DI_EN);
-
-		enable_dma(CH_MEM_STREAM2_SRC);
-		enable_dma(CH_MEM_STREAM2_DEST);
-
-		wait_event_interruptible(coreb_dma_wait, coreb_dma_done);
-
-		disable_dma(CH_MEM_STREAM2_SRC);
-		disable_dma(CH_MEM_STREAM2_DEST);
-
-		count -= len;
-		wrote += len;
-		buf += len;
-		p += len;
-	}
-	*ppos = p;
-	return wrote;
-}
-
-static ssize_t coreb_read(struct file *file, char *buf, size_t count,
-			  loff_t * ppos)
-{
-	unsigned long p = *ppos;
-	ssize_t read = 0;
-
-	if ((p + count) > coreb_size)
-		return -EFAULT;
-
-	while (count > 0) {
-		int len = count;
-
-		if (len > PAGE_SIZE)
-			len = PAGE_SIZE;
-
-		coreb_dma_done = 0;
-
-		invalidate_dcache_range((unsigned long)buf, (unsigned long)(buf+len));
-		/* Source Channel */
-		set_dma_start_addr(CH_MEM_STREAM2_SRC, coreb_base + p);
-		set_dma_x_count(CH_MEM_STREAM2_SRC, len);
-		set_dma_x_modify(CH_MEM_STREAM2_SRC, sizeof(char));
-		set_dma_config(CH_MEM_STREAM2_SRC, 0);
-		/* Destination Channel */
-		set_dma_start_addr(CH_MEM_STREAM2_DEST, (unsigned long)buf);
-		set_dma_x_count(CH_MEM_STREAM2_DEST, len);
-		set_dma_x_modify(CH_MEM_STREAM2_DEST, sizeof(char));
-		set_dma_config(CH_MEM_STREAM2_DEST, WNR | RESTART | DI_EN);
-
-		enable_dma(CH_MEM_STREAM2_SRC);
-		enable_dma(CH_MEM_STREAM2_DEST);
-
-		wait_event_interruptible(coreb_dma_wait, coreb_dma_done);
-
-		disable_dma(CH_MEM_STREAM2_SRC);
-		disable_dma(CH_MEM_STREAM2_DEST);
-
-		count -= len;
-		read += len;
-		buf += len;
-		p += len;
-	}
-
-	return read;
-}
-
-static loff_t coreb_lseek(struct file *file, loff_t offset, int origin)
+static int
+coreb_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg)
 {
-	loff_t ret;
-
-	mutex_lock(&file->f_dentry->d_inode->i_mutex);
-
-	switch (origin) {
-	case 0 /* SEEK_SET */ :
-		if (offset < coreb_size) {
-			file->f_pos = offset;
-			ret = file->f_pos;
-		} else
-			ret = -EINVAL;
-		break;
-	case 1 /* SEEK_CUR */ :
-		if ((offset + file->f_pos) < coreb_size) {
-			file->f_pos += offset;
-			ret = file->f_pos;
-		} else
-			ret = -EINVAL;
-	default:
-		ret = -EINVAL;
-	}
-	mutex_unlock(&file->f_dentry->d_inode->i_mutex);
-	return ret;
-}
-
-/* No BKL needed here */
-static int coreb_open(struct inode *inode, struct file *file)
-{
-	spin_lock_irq(&coreb_lock);
-
-	if (coreb_status & COREB_IS_OPEN)
-		goto out_busy;
-
-	coreb_status |= COREB_IS_OPEN;
-
-	spin_unlock_irq(&coreb_lock);
-	return 0;
-
- out_busy:
-	spin_unlock_irq(&coreb_lock);
-	return -EBUSY;
-}
-
-static int coreb_release(struct inode *inode, struct file *file)
-{
-	spin_lock_irq(&coreb_lock);
-	coreb_status &= ~COREB_IS_OPEN;
-	spin_unlock_irq(&coreb_lock);
-	return 0;
-}
-
-static int coreb_ioctl(struct inode *inode, struct file *file,
-		       unsigned int cmd, unsigned long arg)
-{
-	int retval = 0;
-	int coreb_index = 0;
+	int ret = 0;
 
 	switch (cmd) {
-	case CMD_COREB_INDEX:
-		if (copy_from_user(&coreb_index, (int *)arg, sizeof(int))) {
-			retval = -EFAULT;
-			break;
-		}
-
-		spin_lock_irq(&coreb_lock);
-		switch (coreb_index) {
-		case 0:
-			coreb_base = 0xff600000;
-			coreb_size = 0x4000;
-			break;
-		case 1:
-			coreb_base = 0xff610000;
-			coreb_size = 0x4000;
-			break;
-		case 2:
-			coreb_base = 0xff500000;
-			coreb_size = 0x8000;
-			break;
-		case 3:
-			coreb_base = 0xff400000;
-			coreb_size = 0x8000;
-			break;
-		default:
-			retval = -EINVAL;
-			break;
-		}
-		spin_unlock_irq(&coreb_lock);
-
-		mutex_lock(&file->f_dentry->d_inode->i_mutex);
-		file->f_pos = 0;
-		mutex_unlock(&file->f_dentry->d_inode->i_mutex);
-		break;
 	case CMD_COREB_START:
-		spin_lock_irq(&coreb_lock);
-		if (coreb_status & COREB_IS_RUNNING) {
-			retval = -EBUSY;
-			break;
-		}
-		printk(KERN_INFO "Starting Core B\n");
-		coreb_status |= COREB_IS_RUNNING;
 		bfin_write_SICA_SYSCR(bfin_read_SICA_SYSCR() & ~0x0020);
-		SSYNC();
-		spin_unlock_irq(&coreb_lock);
 		break;
-#if defined(CONFIG_BF561_COREB_RESET)
 	case CMD_COREB_STOP:
-		spin_lock_irq(&coreb_lock);
-		printk(KERN_INFO "Stopping Core B\n");
 		bfin_write_SICA_SYSCR(bfin_read_SICA_SYSCR() | 0x0020);
 		bfin_write_SICB_SYSCR(bfin_read_SICB_SYSCR() | 0x0080);
-		coreb_status &= ~COREB_IS_RUNNING;
-		spin_unlock_irq(&coreb_lock);
 		break;
 	case CMD_COREB_RESET:
-		printk(KERN_INFO "Resetting Core B\n");
 		bfin_write_SICB_SYSCR(bfin_read_SICB_SYSCR() | 0x0080);
 		break;
-#endif
+	default:
+		ret = -EINVAL;
+		break;
 	}
 
-	return retval;
+	CSYNC();
+
+	return ret;
 }
 
 static struct file_operations coreb_fops = {
-	.owner = THIS_MODULE,
-	.llseek = coreb_lseek,
-	.read = coreb_read,
-	.write = coreb_write,
-	.ioctl = coreb_ioctl,
-	.open = coreb_open,
-	.release = coreb_release
+	.owner   = THIS_MODULE,
+	.ioctl   = coreb_ioctl,
 };
 
 static struct miscdevice coreb_dev = {
-	COREB_MINOR,
-	"coreb",
-	&coreb_fops
+	.minor = MISC_DYNAMIC_MINOR,
+	.name  = "coreb",
+	.fops  = &coreb_fops,
 };
 
-static ssize_t coreb_show_status(struct device *dev, struct device_attribute *attr, char *buf)
+static int __init bf561_coreb_init(void)
 {
-	return sprintf(buf,
-		       "Base Address:\t0x%08lx\n"
-		       "Core B is %s\n"
-		       "SICA_SYSCR:\t%04x\n"
-		       "SICB_SYSCR:\t%04x\n"
-		       "\n"
-		       "IRQ Status:\tCore A\t\tCore B\n"
-		       "ISR0:\t\t%08x\t\t%08x\n"
-		       "ISR1:\t\t%08x\t\t%08x\n"
-		       "IMASK0:\t\t%08x\t\t%08x\n"
-		       "IMASK1:\t\t%08x\t\t%08x\n",
-		       coreb_base,
-		       coreb_status & COREB_IS_RUNNING ? "running" : "stalled",
-		       bfin_read_SICA_SYSCR(), bfin_read_SICB_SYSCR(),
-		       bfin_read_SICA_ISR0(), bfin_read_SICB_ISR0(),
-		       bfin_read_SICA_ISR1(), bfin_read_SICB_ISR0(),
-		       bfin_read_SICA_IMASK0(), bfin_read_SICB_IMASK0(),
-		       bfin_read_SICA_IMASK1(), bfin_read_SICB_IMASK1());
-}
-
-static DEVICE_ATTR(coreb_status, S_IRUGO, coreb_show_status, NULL);
-
-int __init bf561_coreb_init(void)
-{
-	init_waitqueue_head(&coreb_dma_wait);
-
-	spin_lock_init(&coreb_lock);
-	/* Request the core memory regions for Core B */
-	if (request_mem_region(0xff600000, 0x4000,
-			       "Core B - Instruction SRAM") == NULL)
-		goto exit;
-
-	if (request_mem_region(0xFF610000, 0x4000,
-			       "Core B - Instruction SRAM") == NULL)
-		goto release_instruction_a_sram;
-
-	if (request_mem_region(0xFF500000, 0x8000,
-			       "Core B - Data Bank B SRAM") == NULL)
-		goto release_instruction_b_sram;
-
-	if (request_mem_region(0xff400000, 0x8000,
-			       "Core B - Data Bank A SRAM") == NULL)
-		goto release_data_b_sram;
-
-	if (request_dma(CH_MEM_STREAM2_DEST, "Core B - DMA Destination") < 0)
-		goto release_data_a_sram;
-
-	if (request_dma(CH_MEM_STREAM2_SRC, "Core B - DMA Source") < 0)
-		goto release_dma_dest;
-
-	set_dma_callback(CH_MEM_STREAM2_DEST, coreb_dma_interrupt, NULL);
-
-	misc_register(&coreb_dev);
-
-	if (device_create_file(coreb_dev.this_device, &dev_attr_coreb_status))
-		goto release_dma_src;
-
-	printk(KERN_INFO "BF561 Core B driver %s initialized.\n", MODULE_VER);
-	return 0;
-
- release_dma_src:
-	free_dma(CH_MEM_STREAM2_SRC);
- release_dma_dest:
-	free_dma(CH_MEM_STREAM2_DEST);
- release_data_a_sram:
-	release_mem_region(0xff400000, 0x8000);
- release_data_b_sram:
-	release_mem_region(0xff500000, 0x8000);
- release_instruction_b_sram:
-	release_mem_region(0xff610000, 0x4000);
- release_instruction_a_sram:
-	release_mem_region(0xff600000, 0x4000);
- exit:
-	return -ENOMEM;
+	return misc_register(&coreb_dev);
 }
+module_init(bf561_coreb_init);
 
-void __exit bf561_coreb_exit(void)
+static void __exit bf561_coreb_exit(void)
 {
-	device_remove_file(coreb_dev.this_device, &dev_attr_coreb_status);
 	misc_deregister(&coreb_dev);
-
-	release_mem_region(0xff610000, 0x4000);
-	release_mem_region(0xff600000, 0x4000);
-	release_mem_region(0xff500000, 0x8000);
-	release_mem_region(0xff400000, 0x8000);
-
-	free_dma(CH_MEM_STREAM2_DEST);
-	free_dma(CH_MEM_STREAM2_SRC);
 }
-
-module_init(bf561_coreb_init);
 module_exit(bf561_coreb_exit);
 
 MODULE_AUTHOR("Bas Vermeulen <bvermeul@blackstar.xs4all.nl>");

arch/blackfin/mach-bf561/include/mach/anomaly.h

@@ -6,7 +6,7 @@
  * Licensed under the GPL-2 or later.
  */
 
-/* This file shoule be up to date with:
+/* This file should be up to date with:
  *  - Revision Q, 11/07/2008; ADSP-BF561 Blackfin Processor Anomaly List
  */
 
@@ -18,11 +18,11 @@
 # error will not work on BF561 silicon version 0.0, 0.1, 0.2, or 0.4
 #endif
 
-/* Multi-Issue Instruction with dsp32shiftimm in slot1 and P-reg Store in slot 2 Not Supported */
+/* Multi-issue instruction with dsp32shiftimm in slot1 and P-reg store in slot 2 not supported */
 #define ANOMALY_05000074 (1)
 /* UART Line Status Register (UART_LSR) Bits Are Not Updated at the Same Time */
 #define ANOMALY_05000099 (__SILICON_REVISION__ < 5)
-/* Trace Buffers may contain errors in emulation mode and/or exception, NMI, reset handlers */
+/* Trace Buffers may record discontinuities into emulation mode and/or exception, NMI, reset handlers */
 #define ANOMALY_05000116 (__SILICON_REVISION__ < 3)
 /* Testset instructions restricted to 32-bit aligned memory locations */
 #define ANOMALY_05000120 (1)
@@ -40,7 +40,7 @@
 #define ANOMALY_05000136 (__SILICON_REVISION__ < 3)
 /* Allowing the SPORT RX FIFO to fill will cause an overflow */
 #define ANOMALY_05000140 (__SILICON_REVISION__ < 3)
-/* Infinite Stall may occur with a particular sequence of consecutive dual dag events */
+/* An Infinite Stall occurs with a particular sequence of consecutive dual dag events */
 #define ANOMALY_05000141 (__SILICON_REVISION__ < 3)
 /* Interrupts may be lost when a programmable input flag is configured to be edge sensitive */
 #define ANOMALY_05000142 (__SILICON_REVISION__ < 3)
@@ -80,7 +80,7 @@
 #define ANOMALY_05000163 (__SILICON_REVISION__ < 3)
 /* PPI Data Lengths Between 8 and 16 Do Not Zero Out Upper Bits */
 #define ANOMALY_05000166 (1)
-/* Turning Serial Ports on with External Frame Syncs */
+/* Turning SPORTs on while External Frame Sync Is Active May Corrupt Data */
 #define ANOMALY_05000167 (1)
 /* SDRAM auto-refresh and subsequent Power Ups */
 #define ANOMALY_05000168 (__SILICON_REVISION__ < 5)
@@ -164,7 +164,7 @@
 #define ANOMALY_05000242 (__SILICON_REVISION__ < 5)
 /* If I-Cache Is On, CSYNC/SSYNC/IDLE Around Change of Control Causes Failures */
 #define ANOMALY_05000244 (__SILICON_REVISION__ < 5)
-/* Spurious Hardware Error from an Access in the Shadow of a Conditional Branch */
+/* False Hardware Error from an Access in the Shadow of a Conditional Branch */
 #define ANOMALY_05000245 (__SILICON_REVISION__ < 5)
 /* TESTSET operation forces stall on the other core */
 #define ANOMALY_05000248 (__SILICON_REVISION__ < 5)
@@ -208,7 +208,7 @@
 #define ANOMALY_05000275 (__SILICON_REVISION__ > 2)
 /* Timing Requirements Change for External Frame Sync PPI Modes with Non-Zero PPI_DELAY */
 #define ANOMALY_05000276 (__SILICON_REVISION__ < 5)
-/* Writes to an I/O data register one SCLK cycle after an edge is detected may clear interrupt */
+/* Writes to an I/O Data Register One SCLK Cycle after an Edge Is Detected May Clear Interrupt */
 #define ANOMALY_05000277 (__SILICON_REVISION__ < 3)
 /* Disabling Peripherals with DMA Running May Cause DMA System Instability */
 #define ANOMALY_05000278 (__SILICON_REVISION__ < 5)
@@ -232,7 +232,7 @@
 #define ANOMALY_05000310 (1)
 /* Errors When SSYNC, CSYNC, or Loads to LT, LB and LC Registers Are Interrupted */
 #define ANOMALY_05000312 (1)
-/* PPI Is Level-Sensitive on First Transfer */
+/* PPI Is Level-Sensitive on First Transfer In Single Frame Sync Modes */
 #define ANOMALY_05000313 (1)
 /* Killed System MMR Write Completes Erroneously On Next System MMR Access */
 #define ANOMALY_05000315 (1)
@@ -276,18 +276,27 @@
 #define ANOMALY_05000428 (__SILICON_REVISION__ > 3)
 /* IFLUSH Instruction at End of Hardware Loop Causes Infinite Stall */
 #define ANOMALY_05000443 (1)
+/* False Hardware Error when RETI points to invalid memory */
+#define ANOMALY_05000461 (1)
 
 /* Anomalies that don't exist on this proc */
+#define ANOMALY_05000119 (0)
 #define ANOMALY_05000158 (0)
 #define ANOMALY_05000183 (0)
+#define ANOMALY_05000233 (0)
 #define ANOMALY_05000273 (0)
 #define ANOMALY_05000311 (0)
 #define ANOMALY_05000353 (1)
 #define ANOMALY_05000380 (0)
 #define ANOMALY_05000386 (1)
+#define ANOMALY_05000389 (0)
+#define ANOMALY_05000400 (0)
+#define ANOMALY_05000430 (0)
 #define ANOMALY_05000432 (0)
 #define ANOMALY_05000435 (0)
 #define ANOMALY_05000447 (0)
 #define ANOMALY_05000448 (0)
+#define ANOMALY_05000456 (0)
+#define ANOMALY_05000450 (0)
 
 #endif

arch/blackfin/mach-bf561/include/mach/cdefBF561.h

@@ -1526,6 +1526,35 @@
 #define bfin_read_MDMA_D0_START_ADDR()  bfin_read_MDMA1_D0_START_ADDR()
 #define bfin_write_MDMA_D0_START_ADDR(val) bfin_write_MDMA1_D0_START_ADDR(val)
 
+#define bfin_read_MDMA_S1_CONFIG()  bfin_read_MDMA1_S1_CONFIG()
+#define bfin_write_MDMA_S1_CONFIG(val) bfin_write_MDMA1_S1_CONFIG(val)
+#define bfin_read_MDMA_S1_IRQ_STATUS()  bfin_read_MDMA1_S1_IRQ_STATUS()
+#define bfin_write_MDMA_S1_IRQ_STATUS(val) bfin_write_MDMA1_S1_IRQ_STATUS(val)
+#define bfin_read_MDMA_S1_X_MODIFY()  bfin_read_MDMA1_S1_X_MODIFY()
+#define bfin_write_MDMA_S1_X_MODIFY(val) bfin_write_MDMA1_S1_X_MODIFY(val)
+#define bfin_read_MDMA_S1_Y_MODIFY()  bfin_read_MDMA1_S1_Y_MODIFY()
+#define bfin_write_MDMA_S1_Y_MODIFY(val) bfin_write_MDMA1_S1_Y_MODIFY(val)
+#define bfin_read_MDMA_S1_X_COUNT()  bfin_read_MDMA1_S1_X_COUNT()
+#define bfin_write_MDMA_S1_X_COUNT(val) bfin_write_MDMA1_S1_X_COUNT(val)
+#define bfin_read_MDMA_S1_Y_COUNT()  bfin_read_MDMA1_S1_Y_COUNT()
+#define bfin_write_MDMA_S1_Y_COUNT(val) bfin_write_MDMA1_S1_Y_COUNT(val)
+#define bfin_read_MDMA_S1_START_ADDR()  bfin_read_MDMA1_S1_START_ADDR()
+#define bfin_write_MDMA_S1_START_ADDR(val) bfin_write_MDMA1_S1_START_ADDR(val)
+#define bfin_read_MDMA_D1_CONFIG()  bfin_read_MDMA1_D1_CONFIG()
+#define bfin_write_MDMA_D1_CONFIG(val) bfin_write_MDMA1_D1_CONFIG(val)
+#define bfin_read_MDMA_D1_IRQ_STATUS()  bfin_read_MDMA1_D1_IRQ_STATUS()
+#define bfin_write_MDMA_D1_IRQ_STATUS(val) bfin_write_MDMA1_D1_IRQ_STATUS(val)
+#define bfin_read_MDMA_D1_X_MODIFY()  bfin_read_MDMA1_D1_X_MODIFY()
+#define bfin_write_MDMA_D1_X_MODIFY(val) bfin_write_MDMA1_D1_X_MODIFY(val)
+#define bfin_read_MDMA_D1_Y_MODIFY()  bfin_read_MDMA1_D1_Y_MODIFY()
+#define bfin_write_MDMA_D1_Y_MODIFY(val) bfin_write_MDMA1_D1_Y_MODIFY(val)
+#define bfin_read_MDMA_D1_X_COUNT()  bfin_read_MDMA1_D1_X_COUNT()
+#define bfin_write_MDMA_D1_X_COUNT(val) bfin_write_MDMA1_D1_X_COUNT(val)
+#define bfin_read_MDMA_D1_Y_COUNT()  bfin_read_MDMA1_D1_Y_COUNT()
+#define bfin_write_MDMA_D1_Y_COUNT(val) bfin_write_MDMA1_D1_Y_COUNT(val)
+#define bfin_read_MDMA_D1_START_ADDR()  bfin_read_MDMA1_D1_START_ADDR()
+#define bfin_write_MDMA_D1_START_ADDR(val) bfin_write_MDMA1_D1_START_ADDR(val)
+
 /* These need to be last due to the cdef/linux inter-dependencies */
 #include <asm/irq.h>
 

arch/blackfin/mach-bf561/include/mach/defBF561.h

@@ -796,6 +796,62 @@
 #define MDMA2_S1_IRQ_STATUS 0xFFC00FE8	/*MemDMA2 Stream 1 Source Interrupt/Status Register */
 #define MDMA2_S1_PERIPHERAL_MAP 0xFFC00FEC	/*MemDMA2 Stream 1 Source Peripheral Map register */
 
+#define MDMA_D0_NEXT_DESC_PTR MDMA1_D0_NEXT_DESC_PTR
+#define MDMA_D0_START_ADDR MDMA1_D0_START_ADDR
+#define MDMA_D0_CONFIG MDMA1_D0_CONFIG
+#define MDMA_D0_X_COUNT MDMA1_D0_X_COUNT
+#define MDMA_D0_X_MODIFY MDMA1_D0_X_MODIFY
+#define MDMA_D0_Y_COUNT MDMA1_D0_Y_COUNT
+#define MDMA_D0_Y_MODIFY MDMA1_D0_Y_MODIFY
+#define MDMA_D0_CURR_DESC_PTR MDMA1_D0_CURR_DESC_PTR
+#define MDMA_D0_CURR_ADDR MDMA1_D0_CURR_ADDR
+#define MDMA_D0_IRQ_STATUS MDMA1_D0_IRQ_STATUS
+#define MDMA_D0_PERIPHERAL_MAP MDMA1_D0_PERIPHERAL_MAP
+#define MDMA_D0_CURR_X_COUNT MDMA1_D0_CURR_X_COUNT
+#define MDMA_D0_CURR_Y_COUNT MDMA1_D0_CURR_Y_COUNT
+
+#define MDMA_S0_NEXT_DESC_PTR MDMA1_S0_NEXT_DESC_PTR
+#define MDMA_S0_START_ADDR MDMA1_S0_START_ADDR
+#define MDMA_S0_CONFIG MDMA1_S0_CONFIG
+#define MDMA_S0_X_COUNT MDMA1_S0_X_COUNT
+#define MDMA_S0_X_MODIFY MDMA1_S0_X_MODIFY
+#define MDMA_S0_Y_COUNT MDMA1_S0_Y_COUNT
+#define MDMA_S0_Y_MODIFY MDMA1_S0_Y_MODIFY
+#define MDMA_S0_CURR_DESC_PTR MDMA1_S0_CURR_DESC_PTR
+#define MDMA_S0_CURR_ADDR MDMA1_S0_CURR_ADDR
+#define MDMA_S0_IRQ_STATUS MDMA1_S0_IRQ_STATUS
+#define MDMA_S0_PERIPHERAL_MAP MDMA1_S0_PERIPHERAL_MAP
+#define MDMA_S0_CURR_X_COUNT MDMA1_S0_CURR_X_COUNT
+#define MDMA_S0_CURR_Y_COUNT MDMA1_S0_CURR_Y_COUNT
+
+#define MDMA_D1_NEXT_DESC_PTR MDMA1_D1_NEXT_DESC_PTR
+#define MDMA_D1_START_ADDR MDMA1_D1_START_ADDR
+#define MDMA_D1_CONFIG MDMA1_D1_CONFIG
+#define MDMA_D1_X_COUNT MDMA1_D1_X_COUNT
+#define MDMA_D1_X_MODIFY MDMA1_D1_X_MODIFY
+#define MDMA_D1_Y_COUNT MDMA1_D1_Y_COUNT
+#define MDMA_D1_Y_MODIFY MDMA1_D1_Y_MODIFY
+#define MDMA_D1_CURR_DESC_PTR MDMA1_D1_CURR_DESC_PTR
+#define MDMA_D1_CURR_ADDR MDMA1_D1_CURR_ADDR
+#define MDMA_D1_IRQ_STATUS MDMA1_D1_IRQ_STATUS
+#define MDMA_D1_PERIPHERAL_MAP MDMA1_D1_PERIPHERAL_MAP
+#define MDMA_D1_CURR_X_COUNT MDMA1_D1_CURR_X_COUNT
+#define MDMA_D1_CURR_Y_COUNT MDMA1_D1_CURR_Y_COUNT
+
+#define MDMA_S1_NEXT_DESC_PTR MDMA1_S1_NEXT_DESC_PTR
+#define MDMA_S1_START_ADDR MDMA1_S1_START_ADDR
+#define MDMA_S1_CONFIG MDMA1_S1_CONFIG
+#define MDMA_S1_X_COUNT MDMA1_S1_X_COUNT
+#define MDMA_S1_X_MODIFY MDMA1_S1_X_MODIFY
+#define MDMA_S1_Y_COUNT MDMA1_S1_Y_COUNT
+#define MDMA_S1_Y_MODIFY MDMA1_S1_Y_MODIFY
+#define MDMA_S1_CURR_DESC_PTR MDMA1_S1_CURR_DESC_PTR
+#define MDMA_S1_CURR_ADDR MDMA1_S1_CURR_ADDR
+#define MDMA_S1_IRQ_STATUS MDMA1_S1_IRQ_STATUS
+#define MDMA_S1_PERIPHERAL_MAP MDMA1_S1_PERIPHERAL_MAP
+#define MDMA_S1_CURR_X_COUNT MDMA1_S1_CURR_X_COUNT
+#define MDMA_S1_CURR_Y_COUNT MDMA1_S1_CURR_Y_COUNT
+
 /* Internal Memory DMA Registers (0xFFC0_1800 - 0xFFC0_19FF) */
 #define IMDMA_D0_CONFIG 0xFFC01808	/*IMDMA Stream 0 Destination Configuration */
 #define IMDMA_D0_NEXT_DESC_PTR 0xFFC01800	/*IMDMA Stream 0 Destination Next Descriptor Ptr Reg */

arch/blackfin/mach-bf561/smp.c

@@ -133,9 +133,9 @@ void __init platform_request_ipi(irq_handler_t handler)
 	int ret;
 
 	ret = request_irq(IRQ_SUPPLE_0, handler, IRQF_DISABLED,
-			  "SMP interrupt", handler);
+			  "Supplemental Interrupt0", handler);
 	if (ret)
-		panic("Cannot request supplemental interrupt 0 for IPI service\n");
+		panic("Cannot request supplemental interrupt 0 for IPI service");
 }
 
 void platform_send_ipi(cpumask_t callmap)

arch/blackfin/mach-common/arch_checks.c

@@ -71,3 +71,10 @@
 #if ANOMALY_05000448
 # error You are using a part with anomaly 05000448, this issue causes random memory read/write failures - that means random crashes.
 #endif
+
+/* if 220 exists, can not set External Memory WB and L2 not_cached, either External Memory not_cached and L2 WB */
+#if ANOMALY_05000220 && \
+	((defined(CONFIG_BFIN_WB) && defined(CONFIG_BFIN_L2_NOT_CACHED)) || \
+	 (!defined(CONFIG_BFIN_DCACHE) && defined(CONFIG_BFIN_L2_WB)))
+# error You are exposing Anomaly 220 in this config, either config L2 as Write Through, or make External Memory WB.
+#endif

arch/blackfin/mach-common/cache.S

@@ -15,6 +15,13 @@
 
 .text
 
+/* 05000443 - IFLUSH cannot be last instruction in hardware loop */
+#if ANOMALY_05000443
+# define BROK_FLUSH_INST "IFLUSH"
+#else
+# define BROK_FLUSH_INST "no anomaly! yeah!"
+#endif
+
 /* Since all L1 caches work the same way, we use the same method for flushing
  * them.  Only the actual flush instruction differs.  We write this in asm as
  * GCC can be hard to coax into writing nice hardware loops.
@@ -23,7 +30,7 @@
  * R0 = start address
  * R1 = end address
  */
-.macro do_flush flushins:req optflushins optnopins label
+.macro do_flush flushins:req label
 
 	R2 = -L1_CACHE_BYTES;
 
@@ -44,22 +51,15 @@
 \label :
 .endif
 	P0 = R0;
+
 	LSETUP (1f, 2f) LC1 = P1;
 1:
-.ifnb \optflushins
-	\optflushins [P0];
-.endif
-#if ANOMALY_05000443
-.ifb \optnopins
-2:
-.endif
+.ifeqs "\flushins", BROK_FLUSH_INST
 	\flushins [P0++];
-.ifnb \optnopins
-2:	\optnopins;
-.endif
-#else
+2:	nop;
+.else
 2:	\flushins [P0++];
-#endif
+.endif
 
 	RTS;
 .endm
@@ -77,25 +77,9 @@ ENTRY(_blackfin_icache_flush_range)
  */
 	P0 = R0;
 	IFLUSH[P0];
-	do_flush IFLUSH, , nop
+	do_flush IFLUSH
 ENDPROC(_blackfin_icache_flush_range)
 
-/* Flush all cache lines assocoiated with this area of memory. */
-ENTRY(_blackfin_icache_dcache_flush_range)
-/*
- * Walkaround to avoid loading wrong instruction after invalidating icache
- * and following sequence is met.
- *
- * 1) One instruction address is cached in the instruction cache.
- * 2) This instruction in SDRAM is changed.
- * 3) IFLASH[P0] is executed only once in blackfin_icache_flush_range().
- * 4) This instruction is executed again, but the old one is loaded.
- */
-	P0 = R0;
-	IFLUSH[P0];
-	do_flush FLUSH, IFLUSH
-ENDPROC(_blackfin_icache_dcache_flush_range)
-
 /* Throw away all D-cached data in specified region without any obligation to
  * write them back.  Since the Blackfin ISA does not have an "invalidate"
  * instruction, we use flush/invalidate.  Perhaps as a speed optimization we
@@ -107,7 +91,7 @@ ENDPROC(_blackfin_dcache_invalidate_range)
 
 /* Flush all data cache lines assocoiated with this memory area */
 ENTRY(_blackfin_dcache_flush_range)
-	do_flush FLUSH, , , .Ldfr
+	do_flush FLUSH, .Ldfr
 ENDPROC(_blackfin_dcache_flush_range)
 
 /* Our headers convert the page structure to an address, so just need to flush

arch/blackfin/mach-common/clocks-init.c

@@ -72,6 +72,7 @@ void init_clocks(void)
 #endif
 	bfin_write_PLL_LOCKCNT(0x300);
 	do_sync();
+	/* We always write PLL_CTL thus avoiding Anomaly 05000242 */
 	bfin_write16(PLL_CTL, PLL_CTL_VAL);
 	__asm__ __volatile__("IDLE;");
 	bfin_write_PLL_DIV(CONFIG_CCLK_ACT_DIV | CONFIG_SCLK_DIV);

arch/blackfin/mach-common/cpufreq.c

@@ -140,7 +140,8 @@ static int __init __bfin_cpu_init(struct cpufreq_policy *policy)
 	cclk = get_cclk() / 1000;
 	sclk = get_sclk() / 1000;
 
-#if ANOMALY_05000273 || (!defined(CONFIG_BF54x) && defined(CONFIG_BFIN_DCACHE))
+#if ANOMALY_05000273 || ANOMALY_05000274 || \
+	(!defined(CONFIG_BF54x) && defined(CONFIG_BFIN_DCACHE))
 	min_cclk = sclk * 2;
 #else
 	min_cclk = sclk;

arch/blackfin/mach-common/entry.S

@@ -36,7 +36,6 @@
 #include <linux/init.h>
 #include <linux/linkage.h>
 #include <linux/unistd.h>
-#include <linux/threads.h>
 #include <asm/blackfin.h>
 #include <asm/errno.h>
 #include <asm/fixed_code.h>
@@ -201,7 +200,18 @@ ENTRY(_ex_single_step)
 	cc = r7 == 0;
 	if !cc jump 1f;
 #endif
-
+#ifdef CONFIG_EXACT_HWERR
+	/* Read the ILAT, and to check to see if the process we are
+	 * single stepping caused a previous hardware error
+	 * If so, do not single step, (which lowers to IRQ5, and makes
+	 * us miss the error).
+	 */
+	p5.l = lo(ILAT);
+	p5.h = hi(ILAT);
+	r7 = [p5];
+	cc = bittst(r7, EVT_IVHW_P);
+	if cc jump 1f;
+#endif
 	/* Single stepping only a single instruction, so clear the trace
 	 * bit here.  */
 	r7 = syscfg;
@@ -263,15 +273,6 @@ ENTRY(_bfin_return_from_exception)
 	r6 = 0x25;
 	CC = R7 == R6;
 	if CC JUMP _double_fault;
-
-	/* Did we cause a HW error? */
-	p5.l = lo(ILAT);
-	p5.h = hi(ILAT);
-	r6 = [p5];
-	r7 = 0x20;		/* Did I just cause anther HW error? */
-	r6 = r7 & r6;
-	CC = R7 == R6;
-	if CC JUMP _double_fault;
 #endif
 
 	(R7:6,P5:4) = [sp++];
@@ -473,6 +474,16 @@ ENTRY(_trap) /* Exception: 4th entry into system event table(supervisor mode)*/
 	[--sp] = ASTAT;
 	[--sp] = (R7:6,P5:4);
 
+#ifdef CONFIG_EXACT_HWERR
+	/* Make sure all pending read/writes complete. This will ensure any
+	 * accesses which could cause hardware errors completes, and signal
+	 * the the hardware before we do something silly, like crash the
+	 * kernel. We don't need to work around anomaly 05000312, since
+	 * we are already atomic
+	 */
+	ssync;
+#endif
+
 #if ANOMALY_05000283 || ANOMALY_05000315
 	cc = r7 == r7;
 	p5.h = HI(CHIPID);
@@ -855,7 +866,7 @@ ENTRY(_ret_from_exception)
 	p1.h = _schedule_and_signal;
 	[p0] = p1;
 	csync;
-	raise 15;		/* raise evt14 to do signal or reschedule */
+	raise 15;		/* raise evt15 to do signal or reschedule */
 4:
 	r0 = syscfg;
 	bitclr(r0, 0);
@@ -916,7 +927,7 @@ ENTRY(_return_from_int)
 	p1.h = _schedule_and_signal_from_int;
 	[p0] = p1;
 	csync;
-#if ANOMALY_05000281
+#if ANOMALY_05000281 || ANOMALY_05000461
 	r0.l = lo(SAFE_USER_INSTRUCTION);
 	r0.h = hi(SAFE_USER_INSTRUCTION);
 	reti = r0;
@@ -930,18 +941,27 @@ ENTRY(_return_from_int)
 ENDPROC(_return_from_int)
 
 ENTRY(_lower_to_irq14)
-#if ANOMALY_05000281
+#if ANOMALY_05000281 || ANOMALY_05000461
 	r0.l = lo(SAFE_USER_INSTRUCTION);
 	r0.h = hi(SAFE_USER_INSTRUCTION);
 	reti = r0;
 #endif
-	r0 = 0x401f;
+
+#ifdef CONFIG_DEBUG_HWERR
+	/* enable irq14 & hwerr interrupt, until we transition to _evt14_softirq */
+	r0 = (EVT_IVG14 | EVT_IVHW | EVT_IRPTEN | EVT_EVX | EVT_NMI | EVT_RST | EVT_EMU);
+#else
+	/* Only enable irq14 interrupt, until we transition to _evt14_softirq */
+	r0 = (EVT_IVG14 | EVT_IRPTEN | EVT_EVX | EVT_NMI | EVT_RST | EVT_EMU);
+#endif
 	sti r0;
 	raise 14;
 	rti;
+ENDPROC(_lower_to_irq14)
+
 ENTRY(_evt14_softirq)
 #ifdef CONFIG_DEBUG_HWERR
-	r0 = 0x3f;
+	r0 = (EVT_IVHW | EVT_IRPTEN | EVT_EVX | EVT_NMI | EVT_RST | EVT_EMU);
 	sti r0;
 #else
 	cli r0;
@@ -949,8 +969,9 @@ ENTRY(_evt14_softirq)
 	[--sp] = RETI;
 	SP += 4;
 	rts;
+ENDPROC(_evt14_softirq)
 
-_schedule_and_signal_from_int:
+ENTRY(_schedule_and_signal_from_int)
 	/* To end up here, vector 15 was changed - so we have to change it
 	 * back.
 	 */
@@ -983,8 +1004,9 @@ _schedule_and_signal_from_int:
 	call _finish_atomic_sections;
 	sp += 12;
 	jump.s .Lresume_userspace;
+ENDPROC(_schedule_and_signal_from_int)
 
-_schedule_and_signal:
+ENTRY(_schedule_and_signal)
 	SAVE_CONTEXT_SYSCALL
 	/* To end up here, vector 15 was changed - so we have to change it
 	 * back.
@@ -1002,7 +1024,7 @@ _schedule_and_signal:
 1:
 	RESTORE_CONTEXT
 	rti;
-ENDPROC(_lower_to_irq14)
+ENDPROC(_schedule_and_signal)
 
 /* We handle this 100% in exception space - to reduce overhead
  * Only potiential problem is if the software buffer gets swapped out of the
@@ -1588,19 +1610,3 @@ ENTRY(_sys_call_table)
 	.long _sys_ni_syscall
 	.endr
 END(_sys_call_table)
-
-#ifdef CONFIG_EXCEPTION_L1_SCRATCH
-/* .section .l1.bss.scratch */
-.set _exception_stack_top, L1_SCRATCH_START + L1_SCRATCH_LENGTH
-#else
-#ifdef CONFIG_SYSCALL_TAB_L1
-.section .l1.bss
-#else
-.bss
-#endif
-ENTRY(_exception_stack)
-	.rept 1024 * NR_CPUS
-	.long 0
-	.endr
-_exception_stack_top:
-#endif

arch/blackfin/mach-common/head.S

@@ -30,8 +30,6 @@ ENTRY(__init_clear_bss)
 	rts;
 ENDPROC(__init_clear_bss)
 
-#define INITIAL_STACK	(L1_SCRATCH_START + L1_SCRATCH_LENGTH - 12)
-
 ENTRY(__start)
 	/* R0: argument of command line string, passed from uboot, save it */
 	R7 = R0;
@@ -126,30 +124,30 @@ ENTRY(__start)
 	 * below
 	 */
 	GET_PDA(p0, r0);
-	r7 = [p0 + PDA_RETX];
+	r6 = [p0 + PDA_RETX];
 	p1.l = _init_saved_retx;
 	p1.h = _init_saved_retx;
-	[p1] = r7;
+	[p1] = r6;
 
-	r7 = [p0 + PDA_DCPLB];
+	r6 = [p0 + PDA_DCPLB];
 	p1.l = _init_saved_dcplb_fault_addr;
 	p1.h = _init_saved_dcplb_fault_addr;
-	[p1] = r7;
+	[p1] = r6;
 
-	r7 = [p0 + PDA_ICPLB];
+	r6 = [p0 + PDA_ICPLB];
 	p1.l = _init_saved_icplb_fault_addr;
 	p1.h = _init_saved_icplb_fault_addr;
-	[p1] = r7;
+	[p1] = r6;
 
-	r7 = [p0 + PDA_SEQSTAT];
+	r6 = [p0 + PDA_SEQSTAT];
 	p1.l = _init_saved_seqstat;
 	p1.h = _init_saved_seqstat;
-	[p1] = r7;
+	[p1] = r6;
 #endif
 
 	/* Initialize stack pointer */
-	sp.l = lo(INITIAL_STACK);
-	sp.h = hi(INITIAL_STACK);
+	sp.l = _init_thread_union;
+	sp.h = _init_thread_union;
 	fp = sp;
 	usp = sp;
 
@@ -189,7 +187,15 @@ ENTRY(__start)
 	/* Put The Code for PLL Programming and SDRAM Programming in L1 ISRAM */
 	call _bfin_relocate_l1_mem;
 #ifdef CONFIG_BFIN_KERNEL_CLOCK
+	/* Only use on-chip scratch space for stack when absolutely required
+	 * to avoid Anomaly 05000227 ... we know the init_clocks() func only
+	 * uses L1 text and stack space and no other memory region.
+	 */
+# define KERNEL_CLOCK_STACK (L1_SCRATCH_START + L1_SCRATCH_LENGTH - 12)
+	sp.l = lo(KERNEL_CLOCK_STACK);
+	sp.h = hi(KERNEL_CLOCK_STACK);
 	call _init_clocks;
+	sp = usp;	/* usp hasnt been touched, so restore from there */
 #endif
 
 	/* This section keeps the processor in supervisor mode
@@ -243,9 +249,7 @@ ENTRY(_real_start)
 	call _cmdline_init;
 
 	/* Load the current thread pointer and stack */
-	sp.l = _init_thread_union;
-	sp.h = _init_thread_union;
-	p1 = THREAD_SIZE (z);
+	p1 = THREAD_SIZE + 4 (z);	/* +4 is for reti loading */
 	sp = sp + p1;
 	usp = sp;
 	fp = sp;

arch/blackfin/mach-common/interrupt.S

@@ -145,6 +145,14 @@ __common_int_entry:
 
 /* interrupt routine for ivhw - 5 */
 ENTRY(_evt_ivhw)
+	/* In case a single action kicks off multiple memory transactions, (like
+	 * a cache line fetch, - this can cause multiple hardware errors, let's
+	 * catch them all. First - make sure all the actions are complete, and
+	 * the core sees the hardware errors.
+	 */
+	SSYNC;
+	SSYNC;
+
 	SAVE_ALL_SYS
 #ifdef CONFIG_FRAME_POINTER
 	fp = 0;
@@ -159,6 +167,25 @@ ENTRY(_evt_ivhw)
 1:
 #endif
 
+	/* Handle all stacked hardware errors
+	 * To make sure we don't hang forever, only do it 10 times
+	 */
+	R0 = 0;
+	R2 = 10;
+1:
+	P0.L = LO(ILAT);
+	P0.H = HI(ILAT);
+	R1 = [P0];
+	CC = BITTST(R1, EVT_IVHW_P);
+	IF ! CC JUMP 2f;
+	/* OK a hardware error is pending - clear it */
+	R1 = EVT_IVHW_P;
+	[P0] = R1;
+	R0 += 1;
+	CC = R1 == R2;
+	if CC JUMP 2f;
+	JUMP 1b;
+2:
 	# We are going to dump something out, so make sure we print IPEND properly
 	p2.l = lo(IPEND);
 	p2.h = hi(IPEND);

arch/blackfin/mach-common/ints-priority.c

@@ -1052,7 +1052,7 @@ int __init init_arch_irq(void)
 			set_irq_chained_handler(irq, bfin_demux_error_irq);
 			break;
 #endif
-#if defined(CONFIG_TICK_SOURCE_SYSTMR0) || defined(CONFIG_IPIPE)
+#if defined(CONFIG_TICKSOURCE_GPTMR0)
 		case IRQ_TIMER0:
 			set_irq_handler(irq, handle_percpu_irq);
 			break;
@@ -1116,6 +1116,9 @@ int __init init_arch_irq(void)
 	    IMASK_IVG14 | IMASK_IVG13 | IMASK_IVG12 | IMASK_IVG11 |
 	    IMASK_IVG10 | IMASK_IVG9 | IMASK_IVG8 | IMASK_IVG7 | IMASK_IVGHW;
 
+	/* This implicitly covers ANOMALY_05000171
+	 * Boot-ROM code modifies SICA_IWRx wakeup registers
+	 */
 #ifdef SIC_IWR0
 	bfin_write_SIC_IWR0(IWR_DISABLE_ALL);
 # ifdef SIC_IWR1
@@ -1136,13 +1139,6 @@ int __init init_arch_irq(void)
 	bfin_write_SIC_IWR(IWR_DISABLE_ALL);
 #endif
 
-#ifdef CONFIG_IPIPE
-	for (irq = 0; irq < NR_IRQS; irq++) {
-		struct irq_desc *desc = irq_to_desc(irq);
-		desc->ic_prio = __ipipe_get_irq_priority(irq);
-	}
-#endif /* CONFIG_IPIPE */
-
 	return 0;
 }
 
@@ -1156,23 +1152,22 @@ void do_irq(int vec, struct pt_regs *fp)
 	} else {
 		struct ivgx *ivg = ivg7_13[vec - IVG7].ifirst;
 		struct ivgx *ivg_stop = ivg7_13[vec - IVG7].istop;
-#if defined(CONFIG_BF54x) || defined(CONFIG_BF52x) || defined(CONFIG_BF561) \
-	|| defined(BF538_FAMILY) || defined(CONFIG_BF51x)
+#if defined(SIC_ISR0) || defined(SICA_ISR0)
 		unsigned long sic_status[3];
 
 		if (smp_processor_id()) {
-#ifdef CONFIG_SMP
+# ifdef SICB_ISR0
 			/* This will be optimized out in UP mode. */
 			sic_status[0] = bfin_read_SICB_ISR0() & bfin_read_SICB_IMASK0();
 			sic_status[1] = bfin_read_SICB_ISR1() & bfin_read_SICB_IMASK1();
-#endif
+# endif
 		} else {
 			sic_status[0] = bfin_read_SIC_ISR0() & bfin_read_SIC_IMASK0();
 			sic_status[1] = bfin_read_SIC_ISR1() & bfin_read_SIC_IMASK1();
 		}
-#ifdef CONFIG_BF54x
+# ifdef SIC_ISR2
 		sic_status[2] = bfin_read_SIC_ISR2() & bfin_read_SIC_IMASK2();
-#endif
+# endif
 		for (;; ivg++) {
 			if (ivg >= ivg_stop) {
 				atomic_inc(&num_spurious);
@@ -1236,20 +1231,16 @@ asmlinkage int __ipipe_grab_irq(int vec, struct pt_regs *regs)
 
 	if (likely(vec == EVT_IVTMR_P)) {
 		irq = IRQ_CORETMR;
-		goto core_tick;
-	}
 
-	SSYNC();
-
-#if defined(CONFIG_BF54x) || defined(CONFIG_BF52x) || defined(CONFIG_BF561)
-	{
+	} else {
+#if defined(SIC_ISR0) || defined(SICA_ISR0)
 		unsigned long sic_status[3];
 
 		sic_status[0] = bfin_read_SIC_ISR0() & bfin_read_SIC_IMASK0();
 		sic_status[1] = bfin_read_SIC_ISR1() & bfin_read_SIC_IMASK1();
-#ifdef CONFIG_BF54x
+# ifdef SIC_ISR2
 		sic_status[2] = bfin_read_SIC_ISR2() & bfin_read_SIC_IMASK2();
-#endif
+# endif
 		for (;; ivg++) {
 			if (ivg >= ivg_stop) {
 				atomic_inc(&num_spurious);
@@ -1258,9 +1249,7 @@ asmlinkage int __ipipe_grab_irq(int vec, struct pt_regs *regs)
 			if (sic_status[(ivg->irqno - IVG7) / 32] & ivg->isrflag)
 				break;
 		}
-	}
 #else
-	{
 		unsigned long sic_status;
 
 		sic_status = bfin_read_SIC_IMASK() & bfin_read_SIC_ISR();
@@ -1272,15 +1261,13 @@ asmlinkage int __ipipe_grab_irq(int vec, struct pt_regs *regs)
 			} else if (sic_status & ivg->isrflag)
 				break;
 		}
-	}
 #endif
 
-	irq = ivg->irqno;
+		irq = ivg->irqno;
+	}
 
 	if (irq == IRQ_SYSTMR) {
-#ifdef CONFIG_GENERIC_CLOCKEVENTS
-core_tick:
-#else
+#ifndef CONFIG_GENERIC_CLOCKEVENTS
 		bfin_write_TIMER_STATUS(1); /* Latch TIMIL0 */
 #endif
 		/* This is basically what we need from the register frame. */
@@ -1292,9 +1279,6 @@ core_tick:
 			__raw_get_cpu_var(__ipipe_tick_regs).ipend |= 0x10;
 	}
 
-#ifndef CONFIG_GENERIC_CLOCKEVENTS
-core_tick:
-#endif
 	if (this_domain == ipipe_root_domain) {
 		s = __test_and_set_bit(IPIPE_SYNCDEFER_FLAG, &p->status);
 		barrier();
@@ -1312,7 +1296,7 @@ core_tick:
 		}
 	}
 
-       return 0;
+	return 0;
 }
 
 #endif /* CONFIG_IPIPE */

arch/blackfin/mach-common/smp.c

@@ -43,8 +43,13 @@
 #include <asm/processor.h>
 #include <asm/ptrace.h>
 #include <asm/cpu.h>
+#include <asm/time.h>
 #include <linux/err.h>
 
+/*
+ * Anomaly notes:
+ * 05000120 - we always define corelock as 32-bit integer in L2
+ */
 struct corelock_slot corelock __attribute__ ((__section__(".l2.bss")));
 
 void __cpuinitdata *init_retx_coreb, *init_saved_retx_coreb,
@@ -352,7 +357,7 @@ int __cpuinit __cpu_up(unsigned int cpu)
 
 static void __cpuinit setup_secondary(unsigned int cpu)
 {
-#if !(defined(CONFIG_TICK_SOURCE_SYSTMR0) || defined(CONFIG_IPIPE))
+#if !defined(CONFIG_TICKSOURCE_GPTMR0)
 	struct irq_desc *timer_desc;
 #endif
 	unsigned long ilat;
@@ -364,16 +369,13 @@ static void __cpuinit setup_secondary(unsigned int cpu)
 	bfin_write_ILAT(ilat);
 	CSYNC();
 
-	/* Reserve the PDA space for the secondary CPU. */
-	reserve_pda();
-
 	/* Enable interrupt levels IVG7-15. IARs have been already
 	 * programmed by the boot CPU.  */
 	bfin_irq_flags |= IMASK_IVG15 |
 	    IMASK_IVG14 | IMASK_IVG13 | IMASK_IVG12 | IMASK_IVG11 |
 	    IMASK_IVG10 | IMASK_IVG9 | IMASK_IVG8 | IMASK_IVG7 | IMASK_IVGHW;
 
-#if defined(CONFIG_TICK_SOURCE_SYSTMR0) || defined(CONFIG_IPIPE)
+#if defined(CONFIG_TICKSOURCE_GPTMR0)
 	/* Power down the core timer, just to play safe. */
 	bfin_write_TCNTL(0);