Forráskód Böngészése

x86, UV: Add support for SGI UV2 hub chip

This patch adds support for a new version of the SGI UV hub
chip. The hub chip is the node controller that connects multiple
blades into a larger coherent SSI.

For the most part, UV2 is compatible with UV1. The majority of
the changes are in the addresses of MMRs and in a few cases, the
contents of MMRs. These changes are the result in changes in the
system topology such as node configuration, processor types,
maximum nodes, physical address sizes, etc.

Signed-off-by: Jack Steiner <steiner@sgi.com>
Link: http://lkml.kernel.org/r/20110511175028.GA18006@sgi.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Jack Steiner 14 éve
szülő
commit
2a919596c1

+ 38 - 4
arch/x86/include/asm/uv/uv_bau.h

@@ -44,7 +44,10 @@
 #define UV_ACT_STATUS_SIZE		2
 #define UV_DISTRIBUTION_SIZE		256
 #define UV_SW_ACK_NPENDING		8
-#define UV_NET_ENDPOINT_INTD		0x38
+#define UV1_NET_ENDPOINT_INTD		0x38
+#define UV2_NET_ENDPOINT_INTD		0x28
+#define UV_NET_ENDPOINT_INTD		(is_uv1_hub() ?			\
+			UV1_NET_ENDPOINT_INTD : UV2_NET_ENDPOINT_INTD)
 #define UV_DESC_BASE_PNODE_SHIFT	49
 #define UV_PAYLOADQ_PNODE_SHIFT		49
 #define UV_PTC_BASENAME			"sgi_uv/ptc_statistics"
@@ -53,10 +56,22 @@
 #define UV_BAU_TUNABLES_FILE		"bau_tunables"
 #define WHITESPACE			" \t\n"
 #define uv_physnodeaddr(x)		((__pa((unsigned long)(x)) & uv_mmask))
-#define UV_ENABLE_INTD_SOFT_ACK_MODE_SHIFT 15
-#define UV_INTD_SOFT_ACK_TIMEOUT_PERIOD_SHIFT 16
-#define UV_INTD_SOFT_ACK_TIMEOUT_PERIOD 0x0000000009UL
+
+
 /* [19:16] SOFT_ACK timeout period  19: 1 is urgency 7  17:16 1 is multiplier */
+/*
+ * UV2: Bit 19 selects between
+ *  (0): 10 microsecond timebase and
+ *  (1): 80 microseconds
+ *  we're using 655us, similar to UV1: 65 units of 10us
+ */
+#define UV1_INTD_SOFT_ACK_TIMEOUT_PERIOD (9UL)
+#define UV2_INTD_SOFT_ACK_TIMEOUT_PERIOD (65*10UL)
+
+#define UV_INTD_SOFT_ACK_TIMEOUT_PERIOD	(is_uv1_hub() ?			\
+		UV1_INTD_SOFT_ACK_TIMEOUT_PERIOD :			\
+		UV2_INTD_SOFT_ACK_TIMEOUT_PERIOD)
+
 #define BAU_MISC_CONTROL_MULT_MASK 3
 
 #define UVH_AGING_PRESCALE_SEL 0x000000b000UL
@@ -76,6 +91,16 @@
 #define DESC_STATUS_ACTIVE		1
 #define DESC_STATUS_DESTINATION_TIMEOUT	2
 #define DESC_STATUS_SOURCE_TIMEOUT	3
+/*
+ * bits put together from HRP_LB_BAU_SB_ACTIVATION_STATUS_0/1/2
+ * values 1 and 5 will not occur
+ */
+#define UV2H_DESC_IDLE			0
+#define UV2H_DESC_DEST_TIMEOUT		2
+#define UV2H_DESC_DEST_STRONG_NACK	3
+#define UV2H_DESC_BUSY			4
+#define UV2H_DESC_SOURCE_TIMEOUT	6
+#define UV2H_DESC_DEST_PUT_ERR		7
 
 /*
  * delay for 'plugged' timeout retries, in microseconds
@@ -96,6 +121,15 @@
 
 #define UV_LB_SUBNODEID 0x10
 
+/* these two are the same for UV1 and UV2: */
+#define UV_SA_SHFT UVH_LB_BAU_MISC_CONTROL_INTD_SOFT_ACK_TIMEOUT_PERIOD_SHFT
+#define UV_SA_MASK UVH_LB_BAU_MISC_CONTROL_INTD_SOFT_ACK_TIMEOUT_PERIOD_MASK
+/* 4 bits of software ack period */
+#define UV2_ACK_MASK 0x7UL
+#define UV2_ACK_UNITS_SHFT 3
+#define UV2_LEG_SHFT UV2H_LB_BAU_MISC_CONTROL_USE_LEGACY_DESCRIPTOR_FORMATS_SHFT
+#define UV2_EXT_SHFT UV2H_LB_BAU_MISC_CONTROL_ENABLE_EXTENDED_SB_STATUS_SHFT
+
 /*
  * number of entries in the destination side payload queue
  */

+ 58 - 13
arch/x86/include/asm/uv/uv_hub.h

@@ -77,8 +77,9 @@
  *
  *		1111110000000000
  *		5432109876543210
- *		pppppppppplc0cch	Nehalem-EX
- *		ppppppppplcc0cch	Westmere-EX
+ *		pppppppppplc0cch	Nehalem-EX (12 bits in hdw reg)
+ *		ppppppppplcc0cch	Westmere-EX (12 bits in hdw reg)
+ *		pppppppppppcccch	SandyBridge (15 bits in hdw reg)
  *		sssssssssss
  *
  *			p  = pnode bits
@@ -87,7 +88,7 @@
  *			h  = hyperthread
  *			s  = bits that are in the SOCKET_ID CSR
  *
- *	Note: Processor only supports 12 bits in the APICID register. The ACPI
+ *	Note: Processor may support fewer bits in the APICID register. The ACPI
  *	      tables hold all 16 bits. Software needs to be aware of this.
  *
  *	      Unless otherwise specified, all references to APICID refer to
@@ -138,6 +139,8 @@ struct uv_hub_info_s {
 	unsigned long		global_mmr_base;
 	unsigned long		gpa_mask;
 	unsigned int		gnode_extra;
+	unsigned char		hub_revision;
+	unsigned char		apic_pnode_shift;
 	unsigned long		gnode_upper;
 	unsigned long		lowmem_remap_top;
 	unsigned long		lowmem_remap_base;
@@ -149,13 +152,31 @@ struct uv_hub_info_s {
 	unsigned char		m_val;
 	unsigned char		n_val;
 	struct uv_scir_s	scir;
-	unsigned char		apic_pnode_shift;
 };
 
 DECLARE_PER_CPU(struct uv_hub_info_s, __uv_hub_info);
 #define uv_hub_info		(&__get_cpu_var(__uv_hub_info))
 #define uv_cpu_hub_info(cpu)	(&per_cpu(__uv_hub_info, cpu))
 
+/*
+ * Hub revisions less than UV2_HUB_REVISION_BASE are UV1 hubs. All UV2
+ * hubs have revision numbers greater than or equal to UV2_HUB_REVISION_BASE.
+ * This is a software convention - NOT the hardware revision numbers in
+ * the hub chip.
+ */
+#define UV1_HUB_REVISION_BASE		1
+#define UV2_HUB_REVISION_BASE		3
+
+static inline int is_uv1_hub(void)
+{
+	return uv_hub_info->hub_revision < UV2_HUB_REVISION_BASE;
+}
+
+static inline int is_uv2_hub(void)
+{
+	return uv_hub_info->hub_revision >= UV2_HUB_REVISION_BASE;
+}
+
 union uvh_apicid {
     unsigned long       v;
     struct uvh_apicid_s {
@@ -180,11 +201,25 @@ union uvh_apicid {
 #define UV_PNODE_TO_GNODE(p)		((p) |uv_hub_info->gnode_extra)
 #define UV_PNODE_TO_NASID(p)		(UV_PNODE_TO_GNODE(p) << 1)
 
-#define UV_LOCAL_MMR_BASE		0xf4000000UL
-#define UV_GLOBAL_MMR32_BASE		0xf8000000UL
+#define UV1_LOCAL_MMR_BASE		0xf4000000UL
+#define UV1_GLOBAL_MMR32_BASE		0xf8000000UL
+#define UV1_LOCAL_MMR_SIZE		(64UL * 1024 * 1024)
+#define UV1_GLOBAL_MMR32_SIZE		(64UL * 1024 * 1024)
+
+#define UV2_LOCAL_MMR_BASE		0xfa000000UL
+#define UV2_GLOBAL_MMR32_BASE		0xfc000000UL
+#define UV2_LOCAL_MMR_SIZE		(32UL * 1024 * 1024)
+#define UV2_GLOBAL_MMR32_SIZE		(32UL * 1024 * 1024)
+
+#define UV_LOCAL_MMR_BASE		(is_uv1_hub() ? UV1_LOCAL_MMR_BASE     \
+						: UV2_LOCAL_MMR_BASE)
+#define UV_GLOBAL_MMR32_BASE		(is_uv1_hub() ? UV1_GLOBAL_MMR32_BASE  \
+						: UV2_GLOBAL_MMR32_BASE)
+#define UV_LOCAL_MMR_SIZE		(is_uv1_hub() ? UV1_LOCAL_MMR_SIZE :   \
+						UV2_LOCAL_MMR_SIZE)
+#define UV_GLOBAL_MMR32_SIZE		(is_uv1_hub() ? UV1_GLOBAL_MMR32_SIZE :\
+						UV2_GLOBAL_MMR32_SIZE)
 #define UV_GLOBAL_MMR64_BASE		(uv_hub_info->global_mmr_base)
-#define UV_LOCAL_MMR_SIZE		(64UL * 1024 * 1024)
-#define UV_GLOBAL_MMR32_SIZE		(64UL * 1024 * 1024)
 
 #define UV_GLOBAL_GRU_MMR_BASE		0x4000000
 
@@ -300,6 +335,17 @@ static inline int uv_apicid_to_pnode(int apicid)
 	return (apicid >> uv_hub_info->apic_pnode_shift);
 }
 
+/*
+ * Convert an apicid to the socket number on the blade
+ */
+static inline int uv_apicid_to_socket(int apicid)
+{
+	if (is_uv1_hub())
+		return (apicid >> (uv_hub_info->apic_pnode_shift - 1)) & 1;
+	else
+		return 0;
+}
+
 /*
  * Access global MMRs using the low memory MMR32 space. This region supports
  * faster MMR access but not all MMRs are accessible in this space.
@@ -519,14 +565,13 @@ static inline void uv_hub_send_ipi(int pnode, int apicid, int vector)
 
 /*
  * Get the minimum revision number of the hub chips within the partition.
- *     1 - initial rev 1.0 silicon
- *     2 - rev 2.0 production silicon
+ *     1 - UV1 rev 1.0 initial silicon
+ *     2 - UV1 rev 2.0 production silicon
+ *     3 - UV2 rev 1.0 initial silicon
  */
 static inline int uv_get_min_hub_revision_id(void)
 {
-	extern int uv_min_hub_revision_id;
-
-	return uv_min_hub_revision_id;
+	return uv_hub_info->hub_revision;
 }
 
 #endif /* CONFIG_X86_64 */

A különbségek nem kerülnek megjelenítésre, a fájl túl nagy
+ 618 - 174
arch/x86/include/asm/uv/uv_mmrs.h


+ 31 - 9
arch/x86/kernel/apic/x2apic_uv_x.c

@@ -91,6 +91,10 @@ static int __init early_get_pnodeid(void)
 	m_n_config.v = uv_early_read_mmr(UVH_RH_GAM_CONFIG_MMR);
 	uv_min_hub_revision_id = node_id.s.revision;
 
+	if (node_id.s.part_number == UV2_HUB_PART_NUMBER)
+		uv_min_hub_revision_id += UV2_HUB_REVISION_BASE - 1;
+
+	uv_hub_info->hub_revision = uv_min_hub_revision_id;
 	pnode = (node_id.s.node_id >> 1) & ((1 << m_n_config.s.n_skt) - 1);
 	return pnode;
 }
@@ -112,17 +116,25 @@ static void __init early_get_apic_pnode_shift(void)
  */
 static void __init uv_set_apicid_hibit(void)
 {
-	union uvh_lb_target_physical_apic_id_mask_u apicid_mask;
+	union uv1h_lb_target_physical_apic_id_mask_u apicid_mask;
 
-	apicid_mask.v = uv_early_read_mmr(UVH_LB_TARGET_PHYSICAL_APIC_ID_MASK);
-	uv_apicid_hibits = apicid_mask.s.bit_enables & UV_APICID_HIBIT_MASK;
+	if (is_uv1_hub()) {
+		apicid_mask.v =
+			uv_early_read_mmr(UV1H_LB_TARGET_PHYSICAL_APIC_ID_MASK);
+		uv_apicid_hibits =
+			apicid_mask.s1.bit_enables & UV_APICID_HIBIT_MASK;
+	}
 }
 
 static int __init uv_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
 {
-	int pnodeid;
+	int pnodeid, is_uv1, is_uv2;
 
-	if (!strcmp(oem_id, "SGI")) {
+	is_uv1 = !strcmp(oem_id, "SGI");
+	is_uv2 = !strcmp(oem_id, "SGI2");
+	if (is_uv1 || is_uv2) {
+		uv_hub_info->hub_revision =
+			is_uv1 ? UV1_HUB_REVISION_BASE : UV2_HUB_REVISION_BASE;
 		pnodeid = early_get_pnodeid();
 		early_get_apic_pnode_shift();
 		x86_platform.is_untracked_pat_range =  uv_is_untracked_pat_range;
@@ -484,12 +496,19 @@ static __init void map_mmr_high(int max_pnode)
 static __init void map_mmioh_high(int max_pnode)
 {
 	union uvh_rh_gam_mmioh_overlay_config_mmr_u mmioh;
-	int shift = UVH_RH_GAM_MMIOH_OVERLAY_CONFIG_MMR_BASE_SHFT;
+	int shift;
 
 	mmioh.v = uv_read_local_mmr(UVH_RH_GAM_MMIOH_OVERLAY_CONFIG_MMR);
-	if (mmioh.s.enable)
-		map_high("MMIOH", mmioh.s.base, shift, mmioh.s.m_io,
+	if (is_uv1_hub() && mmioh.s1.enable) {
+		shift = UV1H_RH_GAM_MMIOH_OVERLAY_CONFIG_MMR_BASE_SHFT;
+		map_high("MMIOH", mmioh.s1.base, shift, mmioh.s1.m_io,
+			max_pnode, map_uc);
+	}
+	if (is_uv2_hub() && mmioh.s2.enable) {
+		shift = UV2H_RH_GAM_MMIOH_OVERLAY_CONFIG_MMR_BASE_SHFT;
+		map_high("MMIOH", mmioh.s2.base, shift, mmioh.s2.m_io,
 			max_pnode, map_uc);
+	}
 }
 
 static __init void map_low_mmrs(void)
@@ -736,13 +755,14 @@ void __init uv_system_init(void)
 	unsigned long mmr_base, present, paddr;
 	unsigned short pnode_mask, pnode_io_mask;
 
+	printk(KERN_INFO "UV: Found %s hub\n", is_uv1_hub() ? "UV1" : "UV2");
 	map_low_mmrs();
 
 	m_n_config.v = uv_read_local_mmr(UVH_RH_GAM_CONFIG_MMR );
 	m_val = m_n_config.s.m_skt;
 	n_val = m_n_config.s.n_skt;
 	mmioh.v = uv_read_local_mmr(UVH_RH_GAM_MMIOH_OVERLAY_CONFIG_MMR);
-	n_io = mmioh.s.n_io;
+	n_io = is_uv1_hub() ? mmioh.s1.n_io : mmioh.s2.n_io;
 	mmr_base =
 	    uv_read_local_mmr(UVH_RH_GAM_MMR_OVERLAY_CONFIG_MMR) &
 	    ~UV_MMR_ENABLE;
@@ -811,6 +831,8 @@ void __init uv_system_init(void)
 		 */
 		uv_cpu_hub_info(cpu)->pnode_mask = pnode_mask;
 		uv_cpu_hub_info(cpu)->apic_pnode_shift = uvh_apicid.s.pnode_shift;
+		uv_cpu_hub_info(cpu)->hub_revision = uv_hub_info->hub_revision;
+
 		pnode = uv_apicid_to_pnode(apicid);
 		blade = boot_pnode_to_blade(pnode);
 		lcpu = uv_blade_info[blade].nr_possible_cpus;

+ 114 - 18
arch/x86/platform/uv/tlb_uv.c

@@ -397,16 +397,13 @@ end_uvhub_quiesce(struct bau_control *hmaster)
  * Wait for completion of a broadcast software ack message
  * return COMPLETE, RETRY(PLUGGED or TIMEOUT) or GIVEUP
  */
-static int uv_wait_completion(struct bau_desc *bau_desc,
+static int uv1_wait_completion(struct bau_desc *bau_desc,
 	unsigned long mmr_offset, int right_shift, int this_cpu,
 	struct bau_control *bcp, struct bau_control *smaster, long try)
 {
 	unsigned long descriptor_status;
 	cycles_t ttime;
 	struct ptc_stats *stat = bcp->statp;
-	struct bau_control *hmaster;
-
-	hmaster = bcp->uvhub_master;
 
 	/* spin on the status MMR, waiting for it to go idle */
 	while ((descriptor_status = (((unsigned long)
@@ -414,16 +411,76 @@ static int uv_wait_completion(struct bau_desc *bau_desc,
 			right_shift) & UV_ACT_STATUS_MASK)) !=
 			DESC_STATUS_IDLE) {
 		/*
-		 * Our software ack messages may be blocked because there are
-		 * no swack resources available.  As long as none of them
-		 * has timed out hardware will NACK our message and its
-		 * state will stay IDLE.
+		 * Our software ack messages may be blocked because
+		 * there are no swack resources available.  As long
+		 * as none of them has timed out hardware will NACK
+		 * our message and its state will stay IDLE.
 		 */
 		if (descriptor_status == DESC_STATUS_SOURCE_TIMEOUT) {
 			stat->s_stimeout++;
 			return FLUSH_GIVEUP;
 		} else if (descriptor_status ==
-					DESC_STATUS_DESTINATION_TIMEOUT) {
+				DESC_STATUS_DESTINATION_TIMEOUT) {
+			stat->s_dtimeout++;
+			ttime = get_cycles();
+
+			/*
+			 * Our retries may be blocked by all destination
+			 * swack resources being consumed, and a timeout
+			 * pending.  In that case hardware returns the
+			 * ERROR that looks like a destination timeout.
+			 */
+			if (cycles_2_us(ttime - bcp->send_message) <
+							timeout_us) {
+				bcp->conseccompletes = 0;
+				return FLUSH_RETRY_PLUGGED;
+			}
+
+			bcp->conseccompletes = 0;
+			return FLUSH_RETRY_TIMEOUT;
+		} else {
+			/*
+			 * descriptor_status is still BUSY
+			 */
+			cpu_relax();
+		}
+	}
+	bcp->conseccompletes++;
+	return FLUSH_COMPLETE;
+}
+
+static int uv2_wait_completion(struct bau_desc *bau_desc,
+	unsigned long mmr_offset, int right_shift, int this_cpu,
+	struct bau_control *bcp, struct bau_control *smaster, long try)
+{
+	unsigned long descriptor_status;
+	unsigned long descriptor_status2;
+	int cpu;
+	cycles_t ttime;
+	struct ptc_stats *stat = bcp->statp;
+
+	/* UV2 has an extra bit of status */
+	cpu = bcp->uvhub_cpu;
+	/* spin on the status MMR, waiting for it to go idle */
+	descriptor_status = (((unsigned long)(uv_read_local_mmr
+		(mmr_offset)) >> right_shift) & UV_ACT_STATUS_MASK);
+	descriptor_status2 = (((unsigned long)uv_read_local_mmr
+		(UV2H_LB_BAU_SB_ACTIVATION_STATUS_2) >> cpu) & 0x1UL);
+	descriptor_status = (descriptor_status << 1) |
+		descriptor_status2;
+	while (descriptor_status != UV2H_DESC_IDLE) {
+		/*
+		 * Our software ack messages may be blocked because
+		 * there are no swack resources available.  As long
+		 * as none of them has timed out hardware will NACK
+		 * our message and its state will stay IDLE.
+		 */
+		if ((descriptor_status == UV2H_DESC_SOURCE_TIMEOUT) ||
+		    (descriptor_status == UV2H_DESC_DEST_STRONG_NACK) ||
+		    (descriptor_status == UV2H_DESC_DEST_PUT_ERR)) {
+			stat->s_stimeout++;
+			return FLUSH_GIVEUP;
+		} else if (descriptor_status == UV2H_DESC_DEST_TIMEOUT) {
 			stat->s_dtimeout++;
 			ttime = get_cycles();
 
@@ -447,11 +504,31 @@ static int uv_wait_completion(struct bau_desc *bau_desc,
 			 */
 			cpu_relax();
 		}
+		descriptor_status = (((unsigned long)(uv_read_local_mmr
+			(mmr_offset)) >> right_shift) &
+			UV_ACT_STATUS_MASK);
+		descriptor_status2 = (((unsigned long)uv_read_local_mmr
+			(UV2H_LB_BAU_SB_ACTIVATION_STATUS_2) >> cpu) &
+			0x1UL);
+		descriptor_status = (descriptor_status << 1) |
+			descriptor_status2;
 	}
 	bcp->conseccompletes++;
 	return FLUSH_COMPLETE;
 }
 
+static int uv_wait_completion(struct bau_desc *bau_desc,
+	unsigned long mmr_offset, int right_shift, int this_cpu,
+	struct bau_control *bcp, struct bau_control *smaster, long try)
+{
+	if (is_uv1_hub())
+		return uv1_wait_completion(bau_desc, mmr_offset, right_shift,
+				   this_cpu, bcp, smaster, try);
+	else
+		return uv2_wait_completion(bau_desc, mmr_offset, right_shift,
+				   this_cpu, bcp, smaster, try);
+}
+
 static inline cycles_t
 sec_2_cycles(unsigned long sec)
 {
@@ -585,7 +662,8 @@ int uv_flush_send_and_wait(struct bau_desc *bau_desc,
 	struct bau_control *smaster = bcp->socket_master;
 	struct bau_control *hmaster = bcp->uvhub_master;
 
-	if (!atomic_inc_unless_ge(&hmaster->uvhub_lock,
+	if (is_uv1_hub()  &&
+			!atomic_inc_unless_ge(&hmaster->uvhub_lock,
 			&hmaster->active_descriptor_count,
 			hmaster->max_bau_concurrent)) {
 		stat->s_throttles++;
@@ -899,12 +977,17 @@ static void __init uv_enable_timeouts(void)
 		uv_write_global_mmr64
 		    (pnode, UVH_LB_BAU_MISC_CONTROL, mmr_image);
 		/*
+		 * UV1:
 		 * Subsequent reversals of the timebase bit (3) cause an
 		 * immediate timeout of one or all INTD resources as
 		 * indicated in bits 2:0 (7 causes all of them to timeout).
 		 */
 		mmr_image |= ((unsigned long)1 <<
 		    UVH_LB_BAU_MISC_CONTROL_ENABLE_INTD_SOFT_ACK_MODE_SHFT);
+		if (is_uv2_hub()) {
+			mmr_image |= ((unsigned long)1 << UV2_LEG_SHFT);
+			mmr_image |= ((unsigned long)1 << UV2_EXT_SHFT);
+		}
 		uv_write_global_mmr64
 		    (pnode, UVH_LB_BAU_MISC_CONTROL, mmr_image);
 	}
@@ -1486,14 +1569,27 @@ calculate_destination_timeout(void)
 	int ret;
 	unsigned long ts_ns;
 
-	mult1 = UV_INTD_SOFT_ACK_TIMEOUT_PERIOD & BAU_MISC_CONTROL_MULT_MASK;
-	mmr_image = uv_read_local_mmr(UVH_AGING_PRESCALE_SEL);
-	index = (mmr_image >> BAU_URGENCY_7_SHIFT) & BAU_URGENCY_7_MASK;
-	mmr_image = uv_read_local_mmr(UVH_TRANSACTION_TIMEOUT);
-	mult2 = (mmr_image >> BAU_TRANS_SHIFT) & BAU_TRANS_MASK;
-	base = timeout_base_ns[index];
-	ts_ns = base * mult1 * mult2;
-	ret = ts_ns / 1000;
+	if (is_uv1_hub()) {
+		mult1 = UV1_INTD_SOFT_ACK_TIMEOUT_PERIOD &
+			BAU_MISC_CONTROL_MULT_MASK;
+		mmr_image = uv_read_local_mmr(UVH_AGING_PRESCALE_SEL);
+		index = (mmr_image >> BAU_URGENCY_7_SHIFT) & BAU_URGENCY_7_MASK;
+		mmr_image = uv_read_local_mmr(UVH_TRANSACTION_TIMEOUT);
+		mult2 = (mmr_image >> BAU_TRANS_SHIFT) & BAU_TRANS_MASK;
+		base = timeout_base_ns[index];
+		ts_ns = base * mult1 * mult2;
+		ret = ts_ns / 1000;
+	} else {
+		/* 4 bits  0/1 for 10/80us, 3 bits of multiplier */
+		mmr_image = uv_read_local_mmr(UVH_AGING_PRESCALE_SEL);
+		mmr_image = (mmr_image & UV_SA_MASK) >> UV_SA_SHFT;
+		if (mmr_image & ((unsigned long)1 << UV2_ACK_UNITS_SHFT))
+			mult1 = 80;
+		else
+			mult1 = 10;
+		base = mmr_image & UV2_ACK_MASK;
+		ret = mult1 * base;
+	}
 	return ret;
 }
 

+ 12 - 4
arch/x86/platform/uv/uv_time.c

@@ -99,8 +99,12 @@ static void uv_rtc_send_IPI(int cpu)
 /* Check for an RTC interrupt pending */
 static int uv_intr_pending(int pnode)
 {
-	return uv_read_global_mmr64(pnode, UVH_EVENT_OCCURRED0) &
-		UVH_EVENT_OCCURRED0_RTC1_MASK;
+	if (is_uv1_hub())
+		return uv_read_global_mmr64(pnode, UVH_EVENT_OCCURRED0) &
+			UV1H_EVENT_OCCURRED0_RTC1_MASK;
+	else
+		return uv_read_global_mmr64(pnode, UV2H_EVENT_OCCURRED2) &
+			UV2H_EVENT_OCCURRED2_RTC_1_MASK;
 }
 
 /* Setup interrupt and return non-zero if early expiration occurred. */
@@ -114,8 +118,12 @@ static int uv_setup_intr(int cpu, u64 expires)
 		UVH_RTC1_INT_CONFIG_M_MASK);
 	uv_write_global_mmr64(pnode, UVH_INT_CMPB, -1L);
 
-	uv_write_global_mmr64(pnode, UVH_EVENT_OCCURRED0_ALIAS,
-		UVH_EVENT_OCCURRED0_RTC1_MASK);
+	if (is_uv1_hub())
+		uv_write_global_mmr64(pnode, UVH_EVENT_OCCURRED0_ALIAS,
+				UV1H_EVENT_OCCURRED0_RTC1_MASK);
+	else
+		uv_write_global_mmr64(pnode, UV2H_EVENT_OCCURRED2_ALIAS,
+				UV2H_EVENT_OCCURRED2_RTC_1_MASK);
 
 	val = (X86_PLATFORM_IPI_VECTOR << UVH_RTC1_INT_CONFIG_VECTOR_SHFT) |
 		((u64)apicid << UVH_RTC1_INT_CONFIG_APIC_ID_SHFT);

Nem az összes módosított fájl került megjelenítésre, mert túl sok fájl változott