Automatic merge with /usr/src/ntfs-2.6.git.

Documentation/00-INDEX

@@ -138,6 +138,8 @@ java.txt
 	- info on the in-kernel binary support for Java(tm).
 kbuild/
 	- directory with info about the kernel build process.
+kdumpt.txt
+       - mini HowTo on getting the crash dump code to work.
 kernel-doc-nano-HOWTO.txt
 	- mini HowTo on generation and location of kernel documentation files.
 kernel-docs.txt

Documentation/SubmittingPatches

@@ -132,21 +132,6 @@ which require discussion or do not have a clear advantage should
 usually be sent first to linux-kernel.  Only after the patch is
 discussed should the patch then be submitted to Linus.
 
-For small patches you may want to CC the Trivial Patch Monkey
-trivial@rustcorp.com.au set up by Rusty Russell; which collects "trivial"
-patches. Trivial patches must qualify for one of the following rules:
- Spelling fixes in documentation
- Spelling fixes which could break grep(1).
- Warning fixes (cluttering with useless warnings is bad)
- Compilation fixes (only if they are actually correct)
- Runtime fixes (only if they actually fix things)
- Removing use of deprecated functions/macros (eg. check_region).
- Contact detail and documentation fixes
- Non-portable code replaced by portable code (even in arch-specific,
- since people copy, as long as it's trivial)
- Any fix by the author/maintainer of the file. (ie. patch monkey
- in re-transmission mode)
-
 
 
 5) Select your CC (e-mail carbon copy) list.
@@ -299,7 +284,7 @@ can certify the below:
 
 then you just add a line saying
 
-	Signed-off-by: Random J Developer <random@developer.org>
+	Signed-off-by: Random J Developer <random@developer.example.org>
 
 Some people also put extra tags at the end.  They'll just be ignored for
 now, but you can do this to mark internal company procedures or just

Documentation/cdrom/sbpcd

@@ -419,6 +419,7 @@ into the file "track01":
  */
 #include <stdio.h>
 #include <sys/ioctl.h>
+#include <sys/types.h>
 #include <linux/cdrom.h>
 
 static struct cdrom_tochdr hdr;
@@ -429,7 +430,7 @@ static int datafile, drive;
 static int i, j, limit, track, err;
 static char filename[32];
 
-main(int argc, char *argv[])
+int main(int argc, char *argv[])
 {
 /*
  * open /dev/cdrom
@@ -516,6 +517,7 @@ entry[track+1].cdte_addr.lba=entry[track].cdte_addr.lba+300;
 	}
       arg.addr.lba++;
     }
+    return 0;
 }
 /*===================== end program ========================================*/
 
@@ -564,15 +566,16 @@ Appendix -- the "cdtester" utility:
 #include <stdio.h>
 #include <malloc.h>
 #include <sys/ioctl.h>
+#include <sys/types.h>
 #include <linux/cdrom.h>
 
 #ifdef AZT_PRIVATE_IOCTLS
 #include <linux/../../drivers/cdrom/aztcd.h>
-#endif AZT_PRIVATE_IOCTLS
+#endif /* AZT_PRIVATE_IOCTLS */
 #ifdef SBP_PRIVATE_IOCTLS
 #include <linux/../../drivers/cdrom/sbpcd.h>
 #include <linux/fs.h>
-#endif SBP_PRIVATE_IOCTLS
+#endif /* SBP_PRIVATE_IOCTLS */
 
 struct cdrom_tochdr hdr;
 struct cdrom_tochdr tocHdr;
@@ -590,7 +593,7 @@ union
 	struct cdrom_msf msf;
 	unsigned char buf[CD_FRAMESIZE_RAW];
 } azt;
-#endif AZT_PRIVATE_IOCTLS
+#endif /* AZT_PRIVATE_IOCTLS */
 int i, i1, i2, i3, j, k;
 unsigned char sequence=0;
 unsigned char command[80];
@@ -738,7 +741,7 @@ void display(int size,unsigned char *buffer)
 	} 
 } 
 
-main(int argc, char *argv[])
+int main(int argc, char *argv[])
 {
 	printf("\nTesting tool for a CDROM driver's audio functions V0.1\n");
 	printf("(C) 1995 Eberhard Moenkeberg <emoenke@gwdg.de>\n");
@@ -1046,12 +1049,13 @@ main(int argc, char *argv[])
 			rc=ioctl(drive,CDROMAUDIOBUFSIZ,j);
 			printf("%d frames granted.\n",rc);
 			break;
-#endif SBP_PRIVATE_IOCTLS
+#endif /* SBP_PRIVATE_IOCTLS */
 		default:
 			printf("unknown command: \"%s\".\n",command);
 			break;
 		}
 	}
+	return 0;
 }
 /*==========================================================================*/
 

Documentation/cpu-freq/governors.txt

@@ -9,6 +9,7 @@
 
 
 		    Dominik Brodowski  <linux@brodo.de>
+            some additions and corrections by Nico Golde <nico@ngolde.de>
 
 
 
@@ -25,6 +26,7 @@ Contents:
 2.1  Performance
 2.2  Powersave
 2.3  Userspace
+2.4  Ondemand
 
 3.   The Governor Interface in the CPUfreq Core
 
@@ -86,7 +88,7 @@ highest frequency within the borders of scaling_min_freq and
 scaling_max_freq.
 
 
-2.1 Powersave
+2.2 Powersave
 -------------
 
 The CPUfreq governor "powersave" sets the CPU statically to the
@@ -94,7 +96,7 @@ lowest frequency within the borders of scaling_min_freq and
 scaling_max_freq.
 
 
-2.2 Userspace
+2.3 Userspace
 -------------
 
 The CPUfreq governor "userspace" allows the user, or any userspace
@@ -103,6 +105,14 @@ by making a sysfs file "scaling_setspeed" available in the CPU-device
 directory.
 
 
+2.4 Ondemand
+------------
+
+The CPUfreq govenor "ondemand" sets the CPU depending on the
+current usage. To do this the CPU must have the capability to
+switch the frequency very fast.
+
+
 
 3. The Governor Interface in the CPUfreq Core
 =============================================

Documentation/cpusets.txt

@@ -51,6 +51,14 @@ mems_allowed vector.
 
 If a cpuset is cpu or mem exclusive, no other cpuset, other than a direct
 ancestor or descendent, may share any of the same CPUs or Memory Nodes.
+A cpuset that is cpu exclusive has a sched domain associated with it.
+The sched domain consists of all cpus in the current cpuset that are not
+part of any exclusive child cpusets.
+This ensures that the scheduler load balacing code only balances
+against the cpus that are in the sched domain as defined above and not
+all of the cpus in the system. This removes any overhead due to
+load balancing code trying to pull tasks outside of the cpu exclusive
+cpuset only to be prevented by the tasks' cpus_allowed mask.
 
 User level code may create and destroy cpusets by name in the cpuset
 virtual file system, manage the attributes and permissions of these
@@ -84,6 +92,9 @@ This can be especially valuable on:
       and a database), or
     * NUMA systems running large HPC applications with demanding
       performance characteristics.
+    * Also cpu_exclusive cpusets are useful for servers running orthogonal
+      workloads such as RT applications requiring low latency and HPC
+      applications that are throughput sensitive
 
 These subsets, or "soft partitions" must be able to be dynamically
 adjusted, as the job mix changes, without impacting other concurrently
@@ -125,6 +136,8 @@ Cpusets extends these two mechanisms as follows:
  - A cpuset may be marked exclusive, which ensures that no other
    cpuset (except direct ancestors and descendents) may contain
    any overlapping CPUs or Memory Nodes.
+   Also a cpu_exclusive cpuset would be associated with a sched
+   domain.
  - You can list all the tasks (by pid) attached to any cpuset.
 
 The implementation of cpusets requires a few, simple hooks
@@ -136,6 +149,9 @@ into the rest of the kernel, none in performance critical paths:
    allowed in that tasks cpuset.
  - in sched.c migrate_all_tasks(), to keep migrating tasks within
    the CPUs allowed by their cpuset, if possible.
+ - in sched.c, a new API partition_sched_domains for handling
+   sched domain changes associated with cpu_exclusive cpusets
+   and related changes in both sched.c and arch/ia64/kernel/domain.c
  - in the mbind and set_mempolicy system calls, to mask the requested
    Memory Nodes by what's allowed in that tasks cpuset.
  - in page_alloc, to restrict memory to allowed nodes.

Documentation/devices.txt

@@ -94,6 +94,7 @@ Your cooperation is appreciated.
 		  9 = /dev/urandom	Faster, less secure random number gen.
 		 10 = /dev/aio		Asyncronous I/O notification interface
 		 11 = /dev/kmsg		Writes to this come out as printk's
+		 12 = /dev/oldmem	Access to crash dump from kexec kernel
   1 block	RAM disk
 		  0 = /dev/ram0		First RAM disk
 		  1 = /dev/ram1		Second RAM disk

Documentation/dvb/bt8xx.txt

@@ -44,26 +44,23 @@ TwinHan (dst) are loaded automatically by the dvb-bt8xx device driver.
    $ modprobe dst
 
 The value 0x71 will override the PCI type detection for dvb-bt8xx,
-which  is necessary for TwinHan cards.
+which is necessary for TwinHan cards.
 
 If you're having an older card (blue color circuit) and card=0x71 locks
 your machine, try using 0x68, too. If that does not work, ask on the
 mailing list.
 
-The DST module takes a couple of useful parameters.
+The DST module takes a couple of useful parameters:
 
-verbose takes values 0 to 5. These values control the verbosity level.
-
-debug takes values 0 and 1. You can either disable or enable debugging.
-
-dst_addons takes values 0 and 0x20. A value of 0 means it is a FTA card.
-0x20 means it has a Conditional Access slot.
-
-The autodected values are determined bythe cards 'response
-string' which you can see in your logs e.g.
-
-dst_get_device_id: Recognise [DSTMCI]
+a. verbose takes values 0 to 5. These values control the verbosity level.
+b. debug takes values 0 and 1. You can either disable or enable debugging.
+c. dst_addons takes values 0 and 0x20:
+- A value of 0 means it is a FTA card.
+- A value of 0x20 means it has a Conditional Access slot.
 
+The autodetected values are determined by the "response string"
+of the card, which you can see in your logs:
+e.g.: dst_get_device_id: Recognize [DSTMCI]
 
 --
-Authors: Richard Walker, Jamie Honan, Michael Hunold, Manu Abraham
+Authors: Richard Walker, Jamie Honan, Michael Hunold, Manu Abraham, Uwe Bugla

Documentation/feature-removal-schedule.txt

@@ -43,6 +43,14 @@ Who:	Randy Dunlap <rddunlap@osdl.org>
 
 ---------------------------
 
+What:	RAW driver (CONFIG_RAW_DRIVER)
+When:	December 2005
+Why:	declared obsolete since kernel 2.6.3
+	O_DIRECT can be used instead
+Who:	Adrian Bunk <bunk@stusta.de>
+
+---------------------------
+
 What:	register_ioctl32_conversion() / unregister_ioctl32_conversion()
 When:	April 2005
 Why:	Replaced by ->compat_ioctl in file_operations and other method

Documentation/kdump/gdbmacros.txt

@@ -0,0 +1,179 @@
+#
+# This file contains a few gdb macros (user defined commands) to extract
+# useful information from kernel crashdump (kdump) like stack traces of
+# all the processes or a particular process and trapinfo.
+#
+# These macros can be used by copying this file in .gdbinit (put in home
+# directory or current directory) or by invoking gdb command with
+# --command=<command-file-name> option
+#
+# Credits:
+# Alexander Nyberg <alexn@telia.com>
+# V Srivatsa <vatsa@in.ibm.com>
+# Maneesh Soni <maneesh@in.ibm.com>
+#
+
+define bttnobp
+	set $tasks_off=((size_t)&((struct task_struct *)0)->tasks)
+	set $pid_off=((size_t)&((struct task_struct *)0)->pids[1].pid_list.next)
+	set $init_t=&init_task
+	set $next_t=(((char *)($init_t->tasks).next) - $tasks_off)
+	while ($next_t != $init_t)
+		set $next_t=(struct task_struct *)$next_t
+		printf "\npid %d; comm %s:\n", $next_t.pid, $next_t.comm
+		printf "===================\n"
+		set var $stackp = $next_t.thread.esp
+		set var $stack_top = ($stackp & ~4095) + 4096
+
+		while ($stackp < $stack_top)
+			if (*($stackp) > _stext && *($stackp) < _sinittext)
+				info symbol *($stackp)
+			end
+			set $stackp += 4
+		end
+		set $next_th=(((char *)$next_t->pids[1].pid_list.next) - $pid_off)
+		while ($next_th != $next_t)
+			set $next_th=(struct task_struct *)$next_th
+			printf "\npid %d; comm %s:\n", $next_t.pid, $next_t.comm
+			printf "===================\n"
+			set var $stackp = $next_t.thread.esp
+			set var $stack_top = ($stackp & ~4095) + 4096
+
+			while ($stackp < $stack_top)
+				if (*($stackp) > _stext && *($stackp) < _sinittext)
+					info symbol *($stackp)
+				end
+				set $stackp += 4
+			end
+			set $next_th=(((char *)$next_th->pids[1].pid_list.next) - $pid_off)
+		end
+		set $next_t=(char *)($next_t->tasks.next) - $tasks_off
+	end
+end
+document bttnobp
+	dump all thread stack traces on a kernel compiled with !CONFIG_FRAME_POINTER
+end
+
+define btt
+	set $tasks_off=((size_t)&((struct task_struct *)0)->tasks)
+	set $pid_off=((size_t)&((struct task_struct *)0)->pids[1].pid_list.next)
+	set $init_t=&init_task
+	set $next_t=(((char *)($init_t->tasks).next) - $tasks_off)
+	while ($next_t != $init_t)
+		set $next_t=(struct task_struct *)$next_t
+		printf "\npid %d; comm %s:\n", $next_t.pid, $next_t.comm
+		printf "===================\n"
+		set var $stackp = $next_t.thread.esp
+		set var $stack_top = ($stackp & ~4095) + 4096
+		set var $stack_bot = ($stackp & ~4095)
+
+		set $stackp = *($stackp)
+		while (($stackp < $stack_top) && ($stackp > $stack_bot))
+			set var $addr = *($stackp + 4)
+			info symbol $addr
+			set $stackp = *($stackp)
+		end
+
+		set $next_th=(((char *)$next_t->pids[1].pid_list.next) - $pid_off)
+		while ($next_th != $next_t)
+			set $next_th=(struct task_struct *)$next_th
+			printf "\npid %d; comm %s:\n", $next_t.pid, $next_t.comm
+			printf "===================\n"
+			set var $stackp = $next_t.thread.esp
+			set var $stack_top = ($stackp & ~4095) + 4096
+			set var $stack_bot = ($stackp & ~4095)
+
+			set $stackp = *($stackp)
+			while (($stackp < $stack_top) && ($stackp > $stack_bot))
+				set var $addr = *($stackp + 4)
+				info symbol $addr
+				set $stackp = *($stackp)
+			end
+			set $next_th=(((char *)$next_th->pids[1].pid_list.next) - $pid_off)
+		end
+		set $next_t=(char *)($next_t->tasks.next) - $tasks_off
+	end
+end
+document btt
+	dump all thread stack traces on a kernel compiled with CONFIG_FRAME_POINTER
+end
+
+define btpid
+	set var $pid = $arg0
+	set $tasks_off=((size_t)&((struct task_struct *)0)->tasks)
+	set $pid_off=((size_t)&((struct task_struct *)0)->pids[1].pid_list.next)
+	set $init_t=&init_task
+	set $next_t=(((char *)($init_t->tasks).next) - $tasks_off)
+	set var $pid_task = 0
+
+	while ($next_t != $init_t)
+		set $next_t=(struct task_struct *)$next_t
+
+		if ($next_t.pid == $pid)
+			set $pid_task = $next_t
+		end
+
+		set $next_th=(((char *)$next_t->pids[1].pid_list.next) - $pid_off)
+		while ($next_th != $next_t)
+			set $next_th=(struct task_struct *)$next_th
+			if ($next_th.pid == $pid)
+				set $pid_task = $next_th
+			end
+			set $next_th=(((char *)$next_th->pids[1].pid_list.next) - $pid_off)
+		end
+		set $next_t=(char *)($next_t->tasks.next) - $tasks_off
+	end
+
+	printf "\npid %d; comm %s:\n", $pid_task.pid, $pid_task.comm
+	printf "===================\n"
+	set var $stackp = $pid_task.thread.esp
+	set var $stack_top = ($stackp & ~4095) + 4096
+	set var $stack_bot = ($stackp & ~4095)
+
+	set $stackp = *($stackp)
+	while (($stackp < $stack_top) && ($stackp > $stack_bot))
+		set var $addr = *($stackp + 4)
+		info symbol $addr
+		set $stackp = *($stackp)
+	end
+end
+document btpid
+	backtrace of pid
+end
+
+
+define trapinfo
+	set var $pid = $arg0
+	set $tasks_off=((size_t)&((struct task_struct *)0)->tasks)
+	set $pid_off=((size_t)&((struct task_struct *)0)->pids[1].pid_list.next)
+	set $init_t=&init_task
+	set $next_t=(((char *)($init_t->tasks).next) - $tasks_off)
+	set var $pid_task = 0
+
+	while ($next_t != $init_t)
+		set $next_t=(struct task_struct *)$next_t
+
+		if ($next_t.pid == $pid)
+			set $pid_task = $next_t
+		end
+
+		set $next_th=(((char *)$next_t->pids[1].pid_list.next) - $pid_off)
+		while ($next_th != $next_t)
+			set $next_th=(struct task_struct *)$next_th
+			if ($next_th.pid == $pid)
+				set $pid_task = $next_th
+			end
+			set $next_th=(((char *)$next_th->pids[1].pid_list.next) - $pid_off)
+		end
+		set $next_t=(char *)($next_t->tasks.next) - $tasks_off
+	end
+
+	printf "Trapno %ld, cr2 0x%lx, error_code %ld\n", $pid_task.thread.trap_no, \
+				$pid_task.thread.cr2, $pid_task.thread.error_code
+
+end
+document trapinfo
+	Run info threads and lookup pid of thread #1
+	'trapinfo <pid>' will tell you by which trap & possibly
+	addresthe kernel paniced.
+end

Documentation/kdump/kdump.txt

@@ -0,0 +1,141 @@
+Documentation for kdump - the kexec-based crash dumping solution
+================================================================
+
+DESIGN
+======
+
+Kdump uses kexec to reboot to a second kernel whenever a dump needs to be taken.
+This second kernel is booted with very little memory. The first kernel reserves
+the section of memory that the second kernel uses. This ensures that on-going
+DMA from the first kernel does not corrupt the second kernel.
+
+All the necessary information about Core image is encoded in ELF format and
+stored in reserved area of memory before crash. Physical address of start of
+ELF header is passed to new kernel through command line parameter elfcorehdr=.
+
+On i386, the first 640 KB of physical memory is needed to boot, irrespective
+of where the kernel loads. Hence, this region is backed up by kexec just before
+rebooting into the new kernel.
+
+In the second kernel, "old memory" can be accessed in two ways.
+
+- The first one is through a /dev/oldmem device interface. A capture utility
+  can read the device file and write out the memory in raw format. This is raw
+  dump of memory and analysis/capture tool should be intelligent enough to
+  determine where to look for the right information. ELF headers (elfcorehdr=)
+  can become handy here.
+
+- The second interface is through /proc/vmcore. This exports the dump as an ELF
+  format file which can be written out using any file copy command
+  (cp, scp, etc). Further, gdb can be used to perform limited debugging on
+  the dump file. This method ensures methods ensure that there is correct
+  ordering of the dump pages (corresponding to the first 640 KB that has been
+  relocated).
+
+SETUP
+=====
+
+1) Download http://www.xmission.com/~ebiederm/files/kexec/kexec-tools-1.101.tar.gz
+   and apply http://lse.sourceforge.net/kdump/patches/kexec-tools-1.101-kdump.patch
+   and after that build the source.
+
+2) Download and build the appropriate (latest) kexec/kdump (-mm) kernel
+   patchset and apply it to the vanilla kernel tree.
+
+   Two kernels need to be built in order to get this feature working.
+
+  A) First kernel:
+   a) Enable "kexec system call" feature (in Processor type and features).
+	CONFIG_KEXEC=y
+   b) This kernel's physical load address should be the default value of
+      0x100000 (0x100000, 1 MB) (in Processor type and features).
+	CONFIG_PHYSICAL_START=0x100000
+   c) Enable "sysfs file system support" (in Pseudo filesystems).
+	CONFIG_SYSFS=y
+   d) Boot into first kernel with the command line parameter "crashkernel=Y@X".
+      Use appropriate values for X and Y. Y denotes how much memory to reserve
+      for the second kernel, and X denotes at what physical address the reserved
+      memory section starts. For example: "crashkernel=64M@16M".
+
+  B) Second kernel:
+   a) Enable "kernel crash dumps" feature (in Processor type and features).
+	CONFIG_CRASH_DUMP=y
+   b) Specify a suitable value for "Physical address where the kernel is
+      loaded" (in Processor type and features). Typically this value
+      should be same as X (See option d) above, e.g., 16 MB or 0x1000000.
+	CONFIG_PHYSICAL_START=0x1000000
+   c) Enable "/proc/vmcore support" (Optional, in Pseudo filesystems).
+	CONFIG_PROC_VMCORE=y
+   d) Disable SMP support and build a UP kernel (Until it is fixed).
+   	CONFIG_SMP=n
+   e) Enable "Local APIC support on uniprocessors".
+   	CONFIG_X86_UP_APIC=y
+   f) Enable "IO-APIC support on uniprocessors"
+   	CONFIG_X86_UP_IOAPIC=y
+
+  Note:   i) Options a) and b) depend upon "Configure standard kernel features
+	     (for small systems)" (under General setup).
+	 ii) Option a) also depends on CONFIG_HIGHMEM (under Processor
+		type and features).
+	iii) Both option a) and b) are under "Processor type and features".
+
+3) Boot into the first kernel. You are now ready to try out kexec-based crash
+   dumps.
+
+4) Load the second kernel to be booted using:
+
+   kexec -p <second-kernel> --crash-dump --args-linux --append="root=<root-dev>
+   init 1 irqpoll"
+
+   Note: i) <second-kernel> has to be a vmlinux image. bzImage will not work,
+	    as of now.
+	ii) By default ELF headers are stored in ELF32 format (for i386). This
+	    is sufficient to represent the physical memory up to 4GB. To store
+	    headers in ELF64 format, specifiy "--elf64-core-headers" on the
+	    kexec command line additionally.
+       iii) Specify "irqpoll" as command line parameter. This reduces driver
+            initialization failures in second kernel due to shared interrupts.
+
+5) System reboots into the second kernel when a panic occurs. A module can be
+   written to force the panic or "ALT-SysRq-c" can be used initiate a crash
+   dump for testing purposes.
+
+6) Write out the dump file using
+
+   cp /proc/vmcore <dump-file>
+
+   Dump memory can also be accessed as a /dev/oldmem device for a linear/raw
+   view.  To create the device, type:
+
+   mknod /dev/oldmem c 1 12
+
+   Use "dd" with suitable options for count, bs and skip to access specific
+   portions of the dump.
+
+   Entire memory:  dd if=/dev/oldmem of=oldmem.001
+
+ANALYSIS
+========
+
+Limited analysis can be done using gdb on the dump file copied out of
+/proc/vmcore. Use vmlinux built with -g and run
+
+  gdb vmlinux <dump-file>
+
+Stack trace for the task on processor 0, register display, memory display
+work fine.
+
+Note: gdb cannot analyse core files generated in ELF64 format for i386.
+
+TODO
+====
+
+1) Provide a kernel pages filtering mechanism so that core file size is not
+   insane on systems having huge memory banks.
+2) Modify "crash" tool to make it recognize this dump.
+
+CONTACT
+=======
+
+Vivek Goyal (vgoyal@in.ibm.com)
+Maneesh Soni (maneesh@in.ibm.com)

Documentation/kernel-parameters.txt

@@ -358,6 +358,10 @@ running once the system is up.
 	cpia_pp=	[HW,PPT]
 			Format: { parport<nr> | auto | none }
 
+	crashkernel=nn[KMG]@ss[KMG]
+			[KNL] Reserve a chunk of physical memory to
+			hold a kernel to switch to with kexec on panic.
+
 	cs4232=		[HW,OSS]
 			Format: <io>,<irq>,<dma>,<dma2>,<mpuio>,<mpuirq>
 
@@ -447,6 +451,10 @@ running once the system is up.
 			Format: {"as"|"cfq"|"deadline"|"noop"}
 			See Documentation/block/as-iosched.txt
 			and Documentation/block/deadline-iosched.txt for details.
+	elfcorehdr=	[IA-32]
+			Specifies physical address of start of kernel core image
+			elf header.
+			See Documentation/kdump.txt for details.
 
 	enforcing	[SELINUX] Set initial enforcing status.
 			Format: {"0" | "1"}
@@ -548,6 +556,9 @@ running once the system is up.
 
 	i810=		[HW,DRM]
 
+	i8k.ignore_dmi	[HW] Continue probing hardware even if DMI data
+			indicates that the driver is running on unsupported
+			hardware.
 	i8k.force	[HW] Activate i8k driver even if SMM BIOS signature
 			does not match list of supported models.
 	i8k.power_status

Documentation/networking/00-INDEX

@@ -114,9 +114,7 @@ tuntap.txt
 vortex.txt
 	- info on using 3Com Vortex (3c590, 3c592, 3c595, 3c597) Ethernet cards.
 wan-router.txt
-	- Wan router documentation
-wanpipe.txt
-	- WANPIPE(tm) Multiprotocol WAN Driver for Linux WAN Router
+	- WAN router documentation
 wavelan.txt
 	- AT&T GIS (nee NCR) WaveLAN card: An Ethernet-like radio transceiver
 x25.txt

Documentation/networking/wanpipe.txt

@@ -1,622 +0,0 @@
-------------------------------------------------------------------------------
-Linux WAN Router Utilities Package
-------------------------------------------------------------------------------
-Version 2.2.1 
-Mar 28, 2001
-Author: Nenad Corbic <ncorbic@sangoma.com>
-Copyright (c) 1995-2001 Sangoma Technologies Inc.
-------------------------------------------------------------------------------
-
-INTRODUCTION
-
-Wide Area Networks (WANs) are used to interconnect Local Area Networks (LANs)
-and/or stand-alone hosts over vast distances with data transfer rates
-significantly higher than those achievable with commonly used dial-up
-connections.
-
-Usually an external device called `WAN router' sitting on your local network
-or connected to your machine's serial port provides physical connection to
-WAN.  Although router's job may be as simple as taking your local network
-traffic, converting it to WAN format and piping it through the WAN link, these
-devices are notoriously expensive, with prices as much as 2 - 5 times higher
-then the price of a typical PC box.
-
-Alternatively, considering robustness and multitasking capabilities of Linux,
-an internal router can be built (most routers use some sort of stripped down
-Unix-like operating system anyway). With a number of relatively inexpensive WAN
-interface cards available on the market, a perfectly usable router can be
-built for less than half a price of an external router.  Yet a Linux box
-acting as a router can still be used for other purposes, such as fire-walling,
-running FTP, WWW or DNS server, etc.
-
-This kernel module introduces the notion of a WAN Link Driver (WLD) to Linux
-operating system and provides generic hardware-independent services for such
-drivers.  Why can existing Linux network device interface not be used for
-this purpose?  Well, it can.  However, there are a few key differences between
-a typical network interface (e.g. Ethernet) and a WAN link.
-
-Many WAN protocols, such as X.25 and frame relay, allow for multiple logical
-connections (known as `virtual circuits' in X.25 terminology) over a single
-physical link.  Each such virtual circuit may (and almost always does) lead
-to a different geographical location and, therefore, different network.  As a
-result, it is the virtual circuit, not the physical link, that represents a
-route and, therefore, a network interface in Linux terms.
-
-To further complicate things, virtual circuits are usually volatile in nature
-(excluding so called `permanent' virtual circuits or PVCs).  With almost no
-time required to set up and tear down a virtual circuit, it is highly desirable
-to implement on-demand connections in order to minimize network charges.  So
-unlike a typical network driver, the WAN driver must be able to handle multiple
-network interfaces and cope as multiple virtual circuits come into existence
-and go away dynamically.
- 
-Last, but not least, WAN configuration is much more complex than that of say
-Ethernet and may well amount to several dozens of parameters.  Some of them
-are "link-wide"  while others are virtual circuit-specific.  The same holds
-true for WAN statistics which is by far more extensive and extremely useful
-when troubleshooting WAN connections.  Extending the ifconfig utility to suit
-these needs may be possible, but does not seem quite reasonable.  Therefore, a
-WAN configuration utility and corresponding application programmer's interface
-is needed for this purpose.
-
-Most of these problems are taken care of by this module.  Its goal is to
-provide a user with more-or-less standard look and feel for all WAN devices and
-assist a WAN device driver writer by providing common services, such as:
-
- o User-level interface via /proc file system
- o Centralized configuration
- o Device management (setup, shutdown, etc.)
- o Network interface management (dynamic creation/destruction)
- o Protocol encapsulation/decapsulation
-
-To ba able to use the Linux WAN Router you will also need a WAN Tools package
-available from
-
-	ftp.sangoma.com/pub/linux/current_wanpipe/wanpipe-X.Y.Z.tgz
-
-where vX.Y.Z represent the wanpipe version number.
-
-For technical questions and/or comments please e-mail to ncorbic@sangoma.com.
-For general inquiries please contact Sangoma Technologies Inc. by
-
-	Hotline:	1-800-388-2475	(USA and Canada, toll free)
-	Phone:		(905) 474-1990  ext: 106
-	Fax:		(905) 474-9223
-	E-mail:		dm@sangoma.com	(David Mandelstam)
-	WWW:		http://www.sangoma.com
-
-
-INSTALLATION
-
-Please read the WanpipeForLinux.pdf manual on how to 
-install the WANPIPE tools and drivers properly. 
-
-
-After installing wanpipe package: /usr/local/wanrouter/doc. 
-On the ftp.sangoma.com : /linux/current_wanpipe/doc
-
-
-COPYRIGHT AND LICENSING INFORMATION
-
-This program is free software; you can redistribute it and/or modify it under
-the terms of the GNU General Public License as published by the Free Software
-Foundation; either version 2, or (at your option) any later version.
-
-This program is distributed in the hope that it will be useful, but WITHOUT
-ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
-FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License along with
-this program; if not, write to the Free Software Foundation, Inc., 675 Mass
-Ave, Cambridge, MA 02139, USA.
-
-
-
-ACKNOWLEDGEMENTS
-
-This product is based on the WANPIPE(tm) Multiprotocol WAN Router developed
-by Sangoma Technologies Inc. for Linux 2.0.x and 2.2.x.  Success of the WANPIPE
-together with the next major release of Linux kernel in summer 1996 commanded
-adequate changes to the WANPIPE code to take full advantage of new Linux
-features.
-
-Instead of continuing developing proprietary interface tied to Sangoma WAN
-cards, we decided to separate all hardware-independent code into a separate
-module and defined two levels of interfaces - one for user-level applications
-and another for kernel-level WAN drivers.  WANPIPE is now implemented as a
-WAN driver compliant with the WAN Link Driver interface.  Also a general
-purpose WAN configuration utility and a set of shell scripts was developed to 
-support WAN router at the user level.
-
-Many useful ideas concerning hardware-independent interface implementation
-were given by Mike McLagan <mike.mclagan@linux.org> and his implementation
-of the Frame Relay router and drivers for Sangoma cards (dlci/sdla).
-
-With the new implementation of the APIs being incorporated into the WANPIPE,
-a special thank goes to Alan Cox in providing insight into BSD sockets.
-
-Special thanks to all the WANPIPE users who performed field-testing, reported
-bugs and made valuable comments and suggestions that help us to improve this
-product.
-
-
-
-NEW IN THIS RELEASE
-
-	o Updated the WANCFG utility
-		Calls the pppconfig to configure the PPPD
-		for async connections.
-
-	o Added the PPPCONFIG utility
-		Used to configure the PPPD dameon for the
-		WANPIPE Async PPP and standard serial port.
-		The wancfg calls the pppconfig to configure
-		the pppd.
-
-	o Fixed the PCI autodetect feature.  
-		The SLOT 0 was used as an autodetect option
-		however, some high end PC's slot numbers start
-		from 0. 
-
-	o This release has been tested with the new backupd
-	  daemon release.
-	
-
-PRODUCT COMPONENTS AND RELATED FILES
-
-/etc: (or user defined)
-	wanpipe1.conf	default router configuration file
-
-/lib/modules/X.Y.Z/misc:
-	wanrouter.o	router kernel loadable module
-	af_wanpipe.o	wanpipe api socket module
-
-/lib/modules/X.Y.Z/net:
-	sdladrv.o	Sangoma SDLA support module
-	wanpipe.o	Sangoma WANPIPE(tm) driver module
-
-/proc/net/wanrouter
-	Config		reads current router configuration
-	Status		reads current router status
-	{name}		reads WAN driver statistics
-
-/usr/sbin:
-	wanrouter	wanrouter start-up script
-	wanconfig	wanrouter configuration utility
-	sdladump	WANPIPE adapter memory dump utility
-        fpipemon        Monitor for Frame Relay
-        cpipemon        Monitor for Cisco HDLC
-	ppipemon 	Monitor for PPP
-	xpipemon 	Monitor for X25
-	wpkbdmon        WANPIPE keyboard led monitor/debugger
-
-/usr/local/wanrouter:
-	README		this file
-	COPYING		GNU General Public License
-	Setup		installation script
-	Filelist	distribution definition file
-	wanrouter.rc	meta-configuration file 
-			(used by the Setup and wanrouter script)
-
-/usr/local/wanrouter/doc:
-	wanpipeForLinux.pdf 	WAN Router User's Manual
-
-/usr/local/wanrouter/patches:
-	wanrouter-v2213.gz  	patch for Linux kernels 2.2.11 up to 2.2.13.
-	wanrouter-v2214.gz	patch for Linux kernel 2.2.14. 
-	wanrouter-v2215.gz	patch for Linux kernels 2.2.15 to 2.2.17.
-	wanrouter-v2218.gz	patch for Linux kernels 2.2.18 and up.
-	wanrouter-v240.gz	patch for Linux kernel 2.4.0.  
-	wanrouter-v242.gz	patch for Linux kernel 2.4.2 and up.
-	wanrouter-v2034.gz	patch for Linux kernel 2.0.34
-	wanrouter-v2036.gz 	patch for Linux kernel 2.0.36 and up. 
-
-/usr/local/wanrouter/patches/kdrivers:
-	Sources of the latest WANPIPE device drivers.
-	These are used to UPGRADE the linux kernel to the newest
-	version if the kernel source has already been pathced with
-	WANPIPE drivers.
-
-/usr/local/wanrouter/samples:
-	interface	sample interface configuration file
-	wanpipe1.cpri 	CHDLC primary port
-     	wanpipe2.csec 	CHDLC secondary port
-     	wanpipe1.fr   	Frame Relay protocol
-     	wanpipe1.ppp  	PPP protocol ) 
-	wanpipe1.asy	CHDLC ASYNC protocol
-	wanpipe1.x25	X25 protocol
-	wanpipe1.stty	Sync TTY driver (Used by Kernel PPPD daemon)
-	wanpipe1.atty	Async TTY driver (Used by Kernel PPPD daemon)
-	wanrouter.rc	sample meta-configuration file
-
-/usr/local/wanrouter/util:
-	*		wan-tools utilities source code
-
-/usr/local/wanrouter/api/x25:
-	*		x25 api sample programs.
-/usr/local/wanrouter/api/chdlc:
-	*		chdlc api sample programs.
-/usr/local/wanrouter/api/fr:
-	*		fr api sample programs.
-/usr/local/wanrouter/config/wancfg:
-	wancfg		WANPIPE GUI configuration program.
-                        Creates wanpipe#.conf files. 
-/usr/local/wanrouter/config/cfgft1:
-	cfgft1		GUI CSU/DSU configuration program.
-
-/usr/include/linux:
-	wanrouter.h	router API definitions
-	wanpipe.h	WANPIPE API definitions
-	sdladrv.h	SDLA support module API definitions
-	sdlasfm.h	SDLA firmware module definitions
-	if_wanpipe.h	WANPIPE Socket definitions
-	if_wanpipe_common.h	WANPIPE Socket/Driver common definitions.
-	sdlapci.h	WANPIPE PCI definitions
-	
-
-/usr/src/linux/net/wanrouter:
-	*		wanrouter source code
-
-/var/log:
-	wanrouter	wanrouter start-up log (created by the Setup script)
-
-/var/lock:  (or /var/lock/subsys for RedHat)
-	wanrouter	wanrouter lock file (created by the Setup script)
-
-/usr/local/wanrouter/firmware:
-	fr514.sfm	Frame relay firmware for Sangoma S508/S514 card
-	cdual514.sfm	Dual Port Cisco HDLC firmware for Sangoma S508/S514 card
-	ppp514.sfm      PPP Firmware for Sangoma S508 and S514 cards
-	x25_508.sfm	X25 Firmware for Sangoma S508 card.
-
-
-REVISION HISTORY
-
-1.0.0	December 31, 1996	Initial version
-
-1.0.1	January 30, 1997	Status and statistics can be read via /proc
-				filesystem entries.
-
-1.0.2   April 30, 1997          Added UDP management via monitors.
-
-1.0.3	June 3, 1997		UDP management for multiple boards using Frame
-				Relay and PPP
-				Enabled continuous transmission of Configure 
-				Request Packet for PPP (for 508 only)
-				Connection Timeout for PPP changed from 900 to 0
-				Flow Control Problem fixed for Frame Relay
-
-1.0.4	July 10, 1997		S508/FT1 monitoring capability in fpipemon and
-				ppipemon utilities.
-				Configurable TTL for UDP packets.
-				Multicast and Broadcast IP source addresses are
-				silently discarded.
-
-1.0.5	July 28, 1997		Configurable T391,T392,N391,N392,N393 for Frame
-				Relay in router.conf.
-				Configurable Memory Address through router.conf 
-				for Frame Relay, PPP and X.25. (commenting this
- 				out enables auto-detection).
-				Fixed freeing up received buffers using kfree()
- 				for Frame Relay and X.25.
-				Protect sdla_peek() by calling save_flags(),
-				cli() and restore_flags().
-				Changed number of Trace elements from 32 to 20
-				Added DLCI specific data monitoring in FPIPEMON. 
-2.0.0	Nov 07, 1997		Implemented protection of RACE conditions by 
-				critical flags for FRAME RELAY and PPP.
-				DLCI List interrupt mode implemented.
-				IPX support in FRAME RELAY and PPP.
-				IPX Server Support (MARS)
-				More driver specific stats included in FPIPEMON
-				and PIPEMON.
-
-2.0.1	Nov 28, 1997		Bug Fixes for version 2.0.0.
-				Protection of "enable_irq()" while 
-				"disable_irq()" has been enabled from any other
-				routine (for Frame Relay, PPP and X25).
-				Added additional Stats for Fpipemon and Ppipemon
-				Improved Load Sharing for multiple boards
-
-2.0.2	Dec 09, 1997		Support for PAP and CHAP for ppp has been
-				implemented.
-
-2.0.3	Aug 15, 1998		New release supporting Cisco HDLC, CIR for Frame
-				relay, Dynamic IP assignment for PPP and Inverse
-				Arp support for Frame-relay.  Man Pages are 
-				included for better support and a new utility
-				for configuring FT1 cards.
-
-2.0.4	Dec 09, 1998	        Dual Port support for Cisco HDLC.
-				Support for HDLC (LAPB) API.
-				Supports BiSync Streaming code for S502E 
-				and S503 cards.
-				Support for Streaming HDLC API.
-				Provides a BSD socket interface for 
-				creating applications using BiSync
-   				streaming.        
-
-2.0.5   Aug 04, 1999 		CHDLC initializatin bug fix.
-				PPP interrupt driven driver: 
-  				Fix to the PPP line hangup problem.
-				New PPP firmware
-				Added comments to the startup SYSTEM ERROR messages
-				Xpipemon debugging application for the X25 protocol
-				New USER_MANUAL.txt
-				Fixed the odd boundary 4byte writes to the board.
-				BiSync Streaming code has been taken out.  
-				 Available as a patch.
-				Streaming HDLC API has been taken out.  
-				 Available as a patch.                 
-
-2.0.6   Aug 17, 1999		Increased debugging in statup scripts
-				Fixed insallation bugs from 2.0.5
-				Kernel patch works for both 2.2.10 and 2.2.11 kernels.
-				There is no functional difference between the two packages         
-
-2.0.7   Aug 26, 1999		o  Merged X25API code into WANPIPE.
-				o  Fixed a memeory leak for X25API
-				o  Updated the X25API code for 2.2.X kernels.
-				o  Improved NEM handling.   
-
-2.1.0	Oct 25, 1999		o New code for S514 PCI Card
-				o New CHDLC and Frame Relay drivers
-				o PPP and X25 are not supported in this release    
-
-2.1.1	Nov 30, 1999		o PPP support for S514 PCI Cards
-
-2.1.3   Apr 06, 2000		o Socket based x25api 
-				o Socket based chdlc api
-				o Socket based fr api
-				o Dual Port Receive only CHDLC support.
-				o Asynchronous CHDLC support (Secondary Port)
-				o cfgft1 GUI csu/dsu configurator
-				o wancfg GUI configuration file 
-				  configurator.
-				o Architectual directory changes.
-
-beta-2.1.4 Jul 2000		o Dynamic interface configuration:
-					Network interfaces reflect the state
-					of protocol layer.  If the protocol becomes
-					disconnected, driver will bring down
-					the interface.  Once the protocol reconnects
-					the interface will be brought up. 
-					
-					Note: This option is turned off by default.
-
-				o Dynamic wanrouter setup using 'wanconfig':
-					wanconfig utility can be used to
-					shutdown,restart,start or reconfigure 
-					a virtual circuit dynamically.
-				     
-					Frame Relay:  Each DLCI can be: 
-						      created,stopped,restarted and reconfigured
-						      dynamically using wanconfig.
-					
-						      ex: wanconfig card wanpipe1 dev wp1_fr16 up
-				  
-				o Wanrouter startup via command line arguments:
-					wanconfig also supports wanrouter startup via command line
-					arguments.  Thus, there is no need to create a wanpipe#.conf
-					configuration file.  
-
-				o Socket based x25api update/bug fixes.
-					Added support for LCN numbers greater than 255.
-					Option to pass up modem messages.
-					Provided a PCI IRQ check, so a single S514
-					card is guaranteed to have a non-sharing interrupt.
-
-				o Fixes to the wancfg utility.
-				o New FT1 debugging support via *pipemon utilities.
-				o Frame Relay ARP support Enabled.
-
-beta3-2.1.4 Jul 2000		o X25 M_BIT Problem fix.
-				o Added the Multi-Port PPP
-				  Updated utilites for the Multi-Port PPP.
-
-2.1.4	Aut 2000
-				o In X25API:
-					Maximum packet an application can send
-					to the driver has been extended to 4096 bytes.
-
-					Fixed the x25 startup bug. Enable 
-					communications only after all interfaces
-					come up.  HIGH SVC/PVC is used to calculate
-					the number of channels.
-					Enable protocol only after all interfaces
-					are enabled.
-
-				o Added an extra state to the FT1 config, kernel module.
-				o Updated the pipemon debuggers.
-
-				o Blocked the Multi-Port PPP from running on kernels
-				  2.2.16 or greater, due to syncppp kernel module
-				  change. 
-	  
-beta1-2.1.5 	Nov 15 2000
-				o Fixed the MulitPort PPP Support for kernels 2.2.16 and above.
-				  2.2.X kernels only
-
-				o Secured the driver UDP debugging calls
-					- All illegal netowrk debugging calls are reported to
-					  the log.
-					- Defined a set of allowed commands, all other denied.
-					
-				o Cpipemon
-					- Added set FT1 commands to the cpipemon. Thus CSU/DSU
-					  configuraiton can be performed using cpipemon.
-					  All systems that cannot run cfgft1 GUI utility should
-					  use cpipemon to configure the on board CSU/DSU.
-
-
-				o Keyboard Led Monitor/Debugger
-					- A new utilty /usr/sbin/wpkbdmon uses keyboard leds
-					  to convey operatinal statistic information of the 
-					  Sangoma WANPIPE cards.
-					NUM_LOCK    = Line State  (On=connected,    Off=disconnected)
-					CAPS_LOCK   = Tx data     (On=transmitting, Off=no tx data)
-					SCROLL_LOCK = Rx data     (On=receiving,    Off=no rx data
-					
-				o Hardware probe on module load and dynamic device allocation
-					- During WANPIPE module load, all Sangoma cards are probed
-					  and found information is printed in the /var/log/messages.
-					- If no cards are found, the module load fails.
-					- Appropriate number of devices are dynamically loaded 
-					  based on the number of Sangoma cards found.
-
-					  Note: The kernel configuraiton option 
-						CONFIG_WANPIPE_CARDS has been taken out.
-					
-				o Fixed the Frame Relay and Chdlc network interfaces so they are
-				  compatible with libpcap libraries.  Meaning, tcpdump, snort,
-				  ethereal, and all other packet sniffers and debuggers work on
-				  all WANPIPE netowrk interfaces.
-					- Set the network interface encoding type to ARPHRD_PPP.
-					  This tell the sniffers that data obtained from the
-					  network interface is in pure IP format.
-				  Fix for 2.2.X kernels only.
-				
-				o True interface encoding option for Frame Relay and CHDLC
-					- The above fix sets the network interface encoding
-					  type to ARPHRD_PPP, however some customers use
-					  the encoding interface type to determine the
-					  protocol running.  Therefore, the TURE ENCODING
-					  option will set the interface type back to the
-					  original value.  
-
-					  NOTE: If this option is used with Frame Relay and CHDLC
-						libpcap library support will be broken.  
-						i.e. tcpdump will not work.
-					Fix for 2.2.x Kernels only.
-						
-				o Ethernet Bridgind over Frame Relay
-					- The Frame Relay bridging has been developed by 
-					  Kristian Hoffmann and Mark Wells.  
-					- The Linux kernel bridge is used to send ethernet 
-					  data over the frame relay links.
-					For 2.2.X Kernels only.
-
-				o Added extensive 2.0.X support. Most new features of
-				  2.1.5 for protocols Frame Relay, PPP and CHDLC are
-				  supported under 2.0.X kernels. 
-
-beta1-2.2.0 	Dec 30 2000
-				o Updated drivers for 2.4.X kernels.
-				o Updated drivers for SMP support.
-				o X25API is now able to share PCI interrupts.
-				o Took out a general polling routine that was used
-				  only by X25API. 
-				o Added appropriate locks to the dynamic reconfiguration
-				  code.
-				o Fixed a bug in the keyboard debug monitor.
-
-beta2-2.2.0	Jan 8 2001
-				o Patches for 2.4.0 kernel
-				o Patches for 2.2.18 kernel
-				o Minor updates to PPP and CHLDC drivers.
-				  Note: No functinal difference. 
-
-beta3-2.2.9	Jan 10 2001
-				o I missed the 2.2.18 kernel patches in beta2-2.2.0
-				  release.  They are included in this release.
-
-Stable Release
-2.2.0		Feb 01 2001
-				o Bug fix in wancfg GUI configurator.
-					The edit function didn't work properly.
-
-
-bata1-2.2.1	Feb 09 2001
-			o WANPIPE TTY Driver emulation. 
-			  Two modes of operation Sync and Async.
-				Sync: Using the PPPD daemon, kernel SyncPPP layer
-				      and the Wanpipe sync TTY driver: a PPP protocol 
-				      connection can be established via Sangoma adapter, over
-				      a T1 leased line.
-			
-				      The 2.4.0 kernel PPP layer supports MULTILINK
-				      protocol, that can be used to bundle any number of Sangoma
-				      adapters (T1 lines) into one, under a single IP address.
-				      Thus, efficiently obtaining multiple T1 throughput. 
-
-				      NOTE: The remote side must also implement MULTILINK PPP
-					    protocol.
-
-				Async:Using the PPPD daemon, kernel AsyncPPP layer
-				      and the WANPIPE async TTY driver: a PPP protocol
-				      connection can be established via Sangoma adapter and
-				      a modem, over a telephone line.
-
-				      Thus, the WANPIPE async TTY driver simulates a serial
-				      TTY driver that would normally be used to interface the 
-				      MODEM to the linux kernel.
-				
-			o WANPIPE PPP Backup Utility
-				This utility will monitor the state of the PPP T1 line.
-				In case of failure, a dial up connection will be established
-				via pppd daemon, ether via a serial tty driver (serial port), 
-				or a WANPIPE async TTY driver (in case serial port is unavailable).
-				
-				Furthermore, while in dial up mode, the primary PPP T1 link
-				will be monitored for signs of life.  
-
-				If the PPP T1 link comes back to life, the dial up connection
-				will be shutdown and T1 line re-established.
-			
-
-			o New Setup installation script.
-				Option to UPGRADE device drivers if the kernel source has
-				already been patched with WANPIPE.
-
-				Option to COMPILE WANPIPE modules against the currently 
-				running kernel, thus no need for manual kernel and module
-				re-compilatin.
-			
-			o Updates and Bug Fixes to wancfg utility.
-
-bata2-2.2.1	Feb 20 2001
-
-			o Bug fixes to the CHDLC device drivers.
-				The driver had compilation problems under kernels
-				2.2.14 or lower.
-
-			o Bug fixes to the Setup installation script.
-				The device drivers compilation options didn't work
-				properly.
-
-			o Update to the wpbackupd daemon.  
-				Optimized the cross-over times, between the primary
-				link and the backup dialup.
-
-beta3-2.2.1	Mar 02 2001
-			o Patches for 2.4.2 kernel.
-
-			o Bug fixes to util/ make files.
-			o Bug fixes to the Setup installation script.
-
-			o Took out the backupd support and made it into
-			  as separate package.
-			  
-beta4-2.2.1     Mar 12 2001
-
-		o Fix to the Frame Relay Device driver.
-			IPSAC sends a packet of zero length
-			header to the frame relay driver.  The
-			driver tries to push its own 2 byte header
-			into the packet, which causes the driver to
-			crash.
-
-		o Fix the WANPIPE re-configuration code.
-			Bug was found by trying to run  the cfgft1 while the
-			interface was already running.  
-
-		o Updates to cfgft1.
-			Writes a wanpipe#.cfgft1 configuration file
-			once the CSU/DSU is configured. This file can
-			holds the current CSU/DSU configuration.
-
-
-
->>>>>> END OF README <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
-
-

Documentation/power/kernel_threads.txt

@@ -12,8 +12,7 @@ refrigerator. Code to do this looks like this:
 	do {
 		hub_events();
 		wait_event_interruptible(khubd_wait, !list_empty(&hub_event_list));
-		if (current->flags & PF_FREEZE)
-			refrigerator(PF_FREEZE);
+		try_to_freeze();
 	} while (!signal_pending(current));
 
 from drivers/usb/core/hub.c::hub_thread()

Documentation/power/pci.txt

@@ -291,6 +291,44 @@ a request to enable wake events from D3, two calls should be made to
 pci_enable_wake (one for both D3hot and D3cold).
 
 
+A reference implementation
+-------------------------
+.suspend()
+{
+	/* driver specific operations */
+
+	/* Disable IRQ */
+	free_irq();
+	/* If using MSI */
+	pci_disable_msi();
+
+	pci_save_state();
+	pci_enable_wake();
+	/* Disable IO/bus master/irq router */
+	pci_disable_device();
+	pci_set_power_state(pci_choose_state());
+}
+
+.resume()
+{
+	pci_set_power_state(PCI_D0);
+	pci_restore_state();
+	/* device's irq possibly is changed, driver should take care */
+	pci_enable_device();
+	pci_set_master();
+
+	/* if using MSI, device's vector possibly is changed */
+	pci_enable_msi();
+
+	request_irq();
+	/* driver specific operations; */
+}
+
+This is a typical implementation. Drivers can slightly change the order
+of the operations in the implementation, ignore some operations or add
+more deriver specific operations in it, but drivers should do something like
+this on the whole.
+
 5. Resources
 ~~~~~~~~~~~~
 

Documentation/power/swsusp.txt

@@ -164,11 +164,11 @@ place where the thread is safe to be frozen (no kernel semaphores
 should be held at that point and it must be safe to sleep there), and
 add:
 
-            if (current->flags & PF_FREEZE)
-                    refrigerator(PF_FREEZE);
+       try_to_freeze();
 
 If the thread is needed for writing the image to storage, you should
-instead set the PF_NOFREEZE process flag when creating the thread.
+instead set the PF_NOFREEZE process flag when creating the thread (and
+be very carefull).
 
 
 Q: What is the difference between between "platform", "shutdown" and
@@ -233,3 +233,81 @@ A: Try running
 cat `cat /proc/[0-9]*/maps | grep / | sed 's:.* /:/:' | sort -u` > /dev/null
 
 after resume. swapoff -a; swapon -a may also be usefull.
+
+Q: What happens to devices during swsusp? They seem to be resumed
+during system suspend?
+
+A: That's correct. We need to resume them if we want to write image to
+disk. Whole sequence goes like
+
+      Suspend part
+      ~~~~~~~~~~~~
+      running system, user asks for suspend-to-disk
+
+      user processes are stopped
+
+      suspend(PMSG_FREEZE): devices are frozen so that they don't interfere
+      		      with state snapshot
+
+      state snapshot: copy of whole used memory is taken with interrupts disabled
+
+      resume(): devices are woken up so that we can write image to swap
+
+      write image to swap
+
+      suspend(PMSG_SUSPEND): suspend devices so that we can power off
+
+      turn the power off
+
+      Resume part
+      ~~~~~~~~~~~
+      (is actually pretty similar)
+
+      running system, user asks for suspend-to-disk
+
+      user processes are stopped (in common case there are none, but with resume-from-initrd, noone knows)
+
+      read image from disk
+
+      suspend(PMSG_FREEZE): devices are frozen so that they don't interfere
+      		      with image restoration
+
+      image restoration: rewrite memory with image
+
+      resume(): devices are woken up so that system can continue
+
+      thaw all user processes
+
+Q: What is this 'Encrypt suspend image' for?
+
+A: First of all: it is not a replacement for dm-crypt encrypted swap.
+It cannot protect your computer while it is suspended. Instead it does
+protect from leaking sensitive data after resume from suspend.
+
+Think of the following: you suspend while an application is running
+that keeps sensitive data in memory. The application itself prevents
+the data from being swapped out. Suspend, however, must write these
+data to swap to be able to resume later on. Without suspend encryption
+your sensitive data are then stored in plaintext on disk.  This means
+that after resume your sensitive data are accessible to all
+applications having direct access to the swap device which was used
+for suspend. If you don't need swap after resume these data can remain
+on disk virtually forever. Thus it can happen that your system gets
+broken in weeks later and sensitive data which you thought were
+encrypted and protected are retrieved and stolen from the swap device.
+To prevent this situation you should use 'Encrypt suspend image'.
+
+During suspend a temporary key is created and this key is used to
+encrypt the data written to disk. When, during resume, the data was
+read back into memory the temporary key is destroyed which simply
+means that all data written to disk during suspend are then
+inaccessible so they can't be stolen later on.  The only thing that
+you must then take care of is that you call 'mkswap' for the swap
+partition used for suspend as early as possible during regular
+boot. This asserts that any temporary key from an oopsed suspend or
+from a failed or aborted resume is erased from the swap device.
+
+As a rule of thumb use encrypted swap to protect your data while your
+system is shut down or suspended. Additionally use the encrypted
+suspend image to prevent sensitive data from being stolen after
+resume.

Documentation/power/video.txt

@@ -83,8 +83,10 @@ Compaq Armada E500 - P3-700     none (1) (S1 also works OK)
 Compaq Evo N620c		vga=normal, s3_bios (2)
 Dell 600m, ATI R250 Lf		none (1), but needs xorg-x11-6.8.1.902-1
 Dell D600, ATI RV250            vga=normal and X, or try vbestate (6)
+Dell D610			vga=normal and X (possibly vbestate (6) too, but not tested)
 Dell Inspiron 4000		??? (*)
 Dell Inspiron 500m		??? (*)
+Dell Inspiron 510m		???
 Dell Inspiron 600m		??? (*)
 Dell Inspiron 8200		??? (*)
 Dell Inspiron 8500		??? (*)
@@ -123,6 +125,7 @@ Toshiba Satellite 4030CDT	s3_mode (3)
 Toshiba Satellite 4080XCDT      s3_mode (3)
 Toshiba Satellite 4090XCDT      ??? (*)
 Toshiba Satellite P10-554       s3_bios,s3_mode (4)(****)
+Toshiba M30                     (2) xor X with nvidia driver using internal AGP
 Uniwill 244IIO			??? (*)
 
 

Documentation/power/video_extension.txt

@@ -1,13 +1,16 @@
-This driver implement the ACPI Extensions For Display Adapters
-for integrated graphics devices on motherboard, as specified in
-ACPI 2.0 Specification, Appendix B, allowing to perform some basic
-control like defining the video POST device, retrieving EDID information
-or to setup a video output, etc.  Note that this is an ref. implementation only.
-It may or may not work for your integrated video device.
+ACPI video extensions
+~~~~~~~~~~~~~~~~~~~~~
+
+This driver implement the ACPI Extensions For Display Adapters for
+integrated graphics devices on motherboard, as specified in ACPI 2.0
+Specification, Appendix B, allowing to perform some basic control like
+defining the video POST device, retrieving EDID information or to
+setup a video output, etc.  Note that this is an ref. implementation
+only.  It may or may not work for your integrated video device.
 
 Interfaces exposed to userland through /proc/acpi/video:
 
-VGA/info : display the supported video bus device capability like ,Video ROM, CRT/LCD/TV.
+VGA/info : display the supported video bus device capability like Video ROM, CRT/LCD/TV.
 VGA/ROM :  Used to get a copy of the display devices' ROM data (up to 4k).
 VGA/POST_info : Used to determine what options are implemented.
 VGA/POST : Used to get/set POST device.
@@ -15,7 +18,7 @@ VGA/DOS : Used to get/set ownership of output switching:
 	Please refer ACPI spec B.4.1 _DOS
 VGA/CRT : CRT output
 VGA/LCD : LCD output
-VGA/TV : TV output 
+VGA/TVO : TV output
 VGA/*/brightness : Used to get/set brightness of output device
 
 Notify event through /proc/acpi/event:

Documentation/s390/s390dbf.txt

@@ -12,8 +12,8 @@ where log records can be stored efficiently in memory, where each component
 One purpose of this is to inspect the debug logs after a production system crash
 in order to analyze the reason for the crash.
 If the system still runs but only a subcomponent which uses dbf failes,
-it is possible to look at the debug logs on a live system via the Linux proc
-filesystem.
+it is possible to look at the debug logs on a live system via the Linux
+debugfs filesystem.
 The debug feature may also very useful for kernel and driver development.
 
 Design:
@@ -52,16 +52,18 @@ Each debug entry contains the following data:
 - Flag, if entry is an exception or not
 
 The debug logs can be inspected in a live system through entries in
-the proc-filesystem. Under the path /proc/s390dbf there is 
+the debugfs-filesystem. Under the toplevel directory "s390dbf" there is
 a directory for each registered component, which is named like the
-corresponding component.
+corresponding component. The debugfs normally should be mounted to
+/sys/kernel/debug therefore the debug feature can be accessed unter
+/sys/kernel/debug/s390dbf.
 
 The content of the directories are files which represent different views
 to the debug log. Each component can decide which views should be
 used through registering them with the function debug_register_view().
 Predefined views for hex/ascii, sprintf and raw binary data are provided.
 It is also possible to define other views. The content of
-a view can be inspected simply by reading the corresponding proc file.
+a view can be inspected simply by reading the corresponding debugfs file.
 
 All debug logs have an an actual debug level (range from 0 to 6).
 The default level is 3. Event and Exception functions have a 'level'
@@ -69,14 +71,14 @@ parameter. Only debug entries with a level that is lower or equal
 than the actual level are written to the log. This means, when
 writing events, high priority log entries should have a low level
 value whereas low priority entries should have a high one.
-The actual debug level can be changed with the help of the proc-filesystem 
-through writing a number string "x" to the 'level' proc file which is
+The actual debug level can be changed with the help of the debugfs-filesystem
+through writing a number string "x" to the 'level' debugfs file which is
 provided for every debug log. Debugging can be switched off completely
-by using "-" on the 'level' proc file.
+by using "-" on the 'level' debugfs file.
 
 Example:
 
-> echo "-" > /proc/s390dbf/dasd/level
+> echo "-" > /sys/kernel/debug/s390dbf/dasd/level
 
 It is also possible to deactivate the debug feature globally for every
 debug log. You can change the behavior using  2 sysctl parameters in
@@ -99,11 +101,11 @@ Kernel Interfaces:
 ------------------
 
 ----------------------------------------------------------------------------
-debug_info_t *debug_register(char *name, int pages_index, int nr_areas,
+debug_info_t *debug_register(char *name, int pages, int nr_areas,
                              int buf_size);
 
-Parameter:    name:        Name of debug log (e.g. used for proc entry) 
-              pages_index: 2^pages_index pages will be allocated per area
+Parameter:    name:        Name of debug log (e.g. used for debugfs entry)
+              pages:       number of pages, which will be allocated per area
               nr_areas:    number of debug areas
               buf_size:    size of data area in each debug entry
 
@@ -134,7 +136,7 @@ Return Value:  none
 Description:   Sets new actual debug level if new_level is valid. 
 
 ---------------------------------------------------------------------------
-+void debug_stop_all(void);
+void debug_stop_all(void);
 
 Parameter:     none
 
@@ -270,7 +272,7 @@ Parameter:     id:    handle for debug log
 Return Value:  0  : ok 
                < 0: Error 
 
-Description:   registers new debug view and creates proc dir entry 
+Description:   registers new debug view and creates debugfs dir entry
 
 ---------------------------------------------------------------------------
 int debug_unregister_view (debug_info_t * id, struct debug_view *view); 
@@ -281,7 +283,7 @@ Parameter:     id:    handle for debug log
 Return Value:  0  : ok 
                < 0: Error 
 
-Description:   unregisters debug view and removes proc dir entry 
+Description:   unregisters debug view and removes debugfs dir entry
 
 
 
@@ -308,7 +310,7 @@ static int init(void)
 {
     /* register 4 debug areas with one page each and 4 byte data field */
 
-    debug_info = debug_register ("test", 0, 4, 4 );
+    debug_info = debug_register ("test", 1, 4, 4 );
     debug_register_view(debug_info,&debug_hex_ascii_view);
     debug_register_view(debug_info,&debug_raw_view);
 
@@ -343,7 +345,7 @@ static int init(void)
     /* register 4 debug areas with one page each and data field for */
     /* format string pointer + 2 varargs (= 3 * sizeof(long))       */
 
-    debug_info = debug_register ("test", 0, 4, sizeof(long) * 3);
+    debug_info = debug_register ("test", 1, 4, sizeof(long) * 3);
     debug_register_view(debug_info,&debug_sprintf_view);
 
     debug_sprintf_event(debug_info, 2 , "first event in %s:%i\n",__FILE__,__LINE__);
@@ -362,16 +364,16 @@ module_exit(cleanup);
 
 
 
-ProcFS Interface
+Debugfs Interface
 ----------------
 Views to the debug logs can be investigated through reading the corresponding 
-proc-files:
+debugfs-files:
 
 Example:
 
-> ls /proc/s390dbf/dasd
-flush  hex_ascii  level      raw 
-> cat /proc/s390dbf/dasd/hex_ascii | sort +1
+> ls /sys/kernel/debug/s390dbf/dasd
+flush  hex_ascii  level pages raw
+> cat /sys/kernel/debug/s390dbf/dasd/hex_ascii | sort +1
 00 00974733272:680099 2 - 02 0006ad7e  07 ea 4a 90 | ....
 00 00974733272:682210 2 - 02 0006ade6  46 52 45 45 | FREE
 00 00974733272:682213 2 - 02 0006adf6  07 ea 4a 90 | ....
@@ -391,25 +393,36 @@ Changing the debug level
 Example:
 
 
-> cat /proc/s390dbf/dasd/level
+> cat /sys/kernel/debug/s390dbf/dasd/level
 3
-> echo "5" > /proc/s390dbf/dasd/level
-> cat /proc/s390dbf/dasd/level
+> echo "5" > /sys/kernel/debug/s390dbf/dasd/level
+> cat /sys/kernel/debug/s390dbf/dasd/level
 5
 
 Flushing debug areas
 --------------------
 Debug areas can be flushed with piping the number of the desired
-area (0...n) to the proc file "flush". When using "-" all debug areas
+area (0...n) to the debugfs file "flush". When using "-" all debug areas
 are flushed.
 
 Examples:
 
 1. Flush debug area 0:
-> echo "0" > /proc/s390dbf/dasd/flush  
+> echo "0" > /sys/kernel/debug/s390dbf/dasd/flush
 
 2. Flush all debug areas:
-> echo "-" > /proc/s390dbf/dasd/flush
+> echo "-" > /sys/kernel/debug/s390dbf/dasd/flush
+
+Changing the size of debug areas
+------------------------------------
+It is possible the change the size of debug areas through piping
+the number of pages to the debugfs file "pages". The resize request will
+also flush the debug areas.
+
+Example:
+
+Define 4 pages for the debug areas of debug feature "dasd":
+> echo "4" > /sys/kernel/debug/s390dbf/dasd/pages
 
 Stooping the debug feature
 --------------------------
@@ -491,7 +504,7 @@ Defining views
 --------------
 
 Views are specified with the 'debug_view' structure. There are defined
-callback functions which are used for reading and writing the proc files:
+callback functions which are used for reading and writing the debugfs files:
 
 struct debug_view {
         char name[DEBUG_MAX_PROCF_LEN];  
@@ -525,7 +538,7 @@ typedef int (debug_input_proc_t) (debug_info_t* id,
 The "private_data" member can be used as pointer to view specific data.
 It is not used by the debug feature itself.
 
-The output when reading a debug-proc file is structured like this:
+The output when reading a debugfs file is structured like this:
 
 "prolog_proc output"
 
@@ -534,13 +547,13 @@ The output when reading a debug-proc file is structured like this:
 "header_proc output 3"  "format_proc output 3"
 ...
 
-When a view is read from the proc fs, the Debug Feature calls the 
+When a view is read from the debugfs, the Debug Feature calls the
 'prolog_proc' once for writing the prolog.
 Then 'header_proc' and 'format_proc' are called for each 
 existing debug entry.
 
 The input_proc can be used to implement functionality when it is written to 
-the view (e.g. like with 'echo "0" > /proc/s390dbf/dasd/level).
+the view (e.g. like with 'echo "0" > /sys/kernel/debug/s390dbf/dasd/level).
 
 For header_proc there can be used the default function
 debug_dflt_header_fn() which is defined in in debug.h.
@@ -602,7 +615,7 @@ debug_info = debug_register ("test", 0, 4, 4 ));
 debug_register_view(debug_info, &debug_test_view);
 for(i = 0; i < 10; i ++) debug_int_event(debug_info, 1, i);
 
-> cat /proc/s390dbf/test/myview
+> cat /sys/kernel/debug/s390dbf/test/myview
 00 00964419734:611402 1 - 00 88042ca   This error...........
 00 00964419734:611405 1 - 00 88042ca   That error...........
 00 00964419734:611408 1 - 00 88042ca   Problem..............

Documentation/sysrq.txt

@@ -72,6 +72,8 @@ On all -  write a character to /proc/sysrq-trigger.  eg:
 'b'     - Will immediately reboot the system without syncing or unmounting
           your disks.
 
+'c'	- Will perform a kexec reboot in order to take a crashdump.
+
 'o'     - Will shut your system off (if configured and supported).
 
 's'     - Will attempt to sync all mounted filesystems.
@@ -122,6 +124,9 @@ useful when you want to exit a program that will not let you switch consoles.
 re'B'oot is good when you're unable to shut down. But you should also 'S'ync
 and 'U'mount first.
 
+'C'rashdump can be used to manually trigger a crashdump when the system is hung.
+The kernel needs to have been built with CONFIG_KEXEC enabled.
+
 'S'ync is great when your system is locked up, it allows you to sync your
 disks and will certainly lessen the chance of data loss and fscking. Note
 that the sync hasn't taken place until you see the "OK" and "Done" appear

MAINTAINERS

@@ -576,10 +576,9 @@ S:	Supported
 
 COMPUTONE INTELLIPORT MULTIPORT CARD
 P:	Michael H. Warfield
-M:	Michael H. Warfield <mhw@wittsend.com>
+M:	mhw@wittsend.com
 W:	http://www.wittsend.com/computone.html
-L:	linux-computone@lazuli.wittsend.com
-S:	Orphaned
+S:	Maintained
 
 COSA/SRP SYNC SERIAL DRIVER
 P:	Jan "Yenya" Kasprzak
@@ -1330,6 +1329,16 @@ M:	rml@novell.com
 L:	linux-kernel@vger.kernel.org
 S:	Maintained
 
+KEXEC
+P:	Eric Biederman
+P:	Randy Dunlap
+M:	ebiederm@xmission.com
+M:	rddunlap@osdl.org
+W:	http://www.xmission.com/~ebiederm/files/kexec/
+L:	linux-kernel@vger.kernel.org
+L:	fastboot@osdl.org
+S:	Maintained
+
 LANMEDIA WAN CARD DRIVER
 P:	Andrew Stanley-Jones
 M:	asj@lanmedia.com
@@ -2115,9 +2124,7 @@ S:	Maintained
 SOFTWARE SUSPEND:
 P:	Pavel Machek
 M:	pavel@suse.cz
-M:	pavel@ucw.cz
-L:	http://lister.fornax.hu/mailman/listinfo/swsusp
-W:	http://swsusp.sf.net/
+L:	linux-pm@osdl.org
 S:	Maintained
 
 SONIC NETWORK DRIVER
@@ -2594,7 +2601,7 @@ M:	davidm@snapgear.com
 P:	D. Jeff Dionne (created first uClinux port)
 M:	jeff@uclinux.org
 W:	http://www.uclinux.org/
-L:	uclinux-dev@uclinux.org
+L:	uclinux-dev@uclinux.org  (subscribers-only)
 S:	Maintained
 
 UCLINUX FOR NEC V850

Makefile

@@ -281,7 +281,7 @@ export quiet Q KBUILD_VERBOSE
 # See documentation in Documentation/kbuild/makefiles.txt
 
 # cc-option
-# Usage: cflags-y += $(call gcc-option, -march=winchip-c6, -march=i586)
+# Usage: cflags-y += $(call cc-option, -march=winchip-c6, -march=i586)
 
 cc-option = $(shell if $(CC) $(CFLAGS) $(1) -S -o /dev/null -xc /dev/null \
              > /dev/null 2>&1; then echo "$(1)"; else echo "$(2)"; fi ;)

arch/arm/Kconfig

@@ -157,7 +157,7 @@ config ARCH_RPC
 config ARCH_SA1100
 	bool "SA1100-based"
 	select ISA
-	select DISCONTIGMEM
+	select ARCH_DISCONTIGMEM_ENABLE
 
 config ARCH_S3C2410
 	bool "Samsung S3C2410"
@@ -346,6 +346,21 @@ config PREEMPT
 	  Say Y here if you are building a kernel for a desktop, embedded
 	  or real-time system.  Say N if you are unsure.
 
+config NO_IDLE_HZ
+	bool "Dynamic tick timer"
+	help
+	  Select this option if you want to disable continuous timer ticks
+	  and have them programmed to occur as required. This option saves
+	  power as the system can remain in idle state for longer.
+
+	  By default dynamic tick is disabled during the boot, and can be
+	  manually enabled with:
+
+	    echo 1 > /sys/devices/system/timer/timer0/dyn_tick
+
+	  Alternatively, if you want dynamic tick automatically enabled
+	  during boot, pass "dyntick=enable" via the kernel command string.
+
 config ARCH_DISCONTIGMEM_ENABLE
 	bool
 	default (ARCH_LH7A40X && !LH7A40X_CONTIGMEM)

arch/arm/configs/enp2611_defconfig

@@ -1,14 +1,13 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc1-bk2
-# Sun Mar 27 22:08:24 2005
+# Linux kernel version: 2.6.12-git6
+# Sat Jun 25 00:57:29 2005
 #
 CONFIG_ARM=y
 CONFIG_MMU=y
 CONFIG_UID16=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
 
 #
 # Code maturity level options
@@ -16,6 +15,7 @@ CONFIG_GENERIC_IOMAP=y
 CONFIG_EXPERIMENTAL=y
 CONFIG_CLEAN_COMPILE=y
 CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
 
 #
 # General setup
@@ -35,6 +35,8 @@ CONFIG_EMBEDDED=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
@@ -82,6 +84,7 @@ CONFIG_ARCH_IXP2000=y
 # CONFIG_ARCH_VERSATILE is not set
 # CONFIG_ARCH_IMX is not set
 # CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_AAEC2000 is not set
 CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y
 
 #
@@ -96,6 +99,7 @@ CONFIG_ARCH_ENP2611=y
 # CONFIG_ARCH_IXDP2800 is not set
 # CONFIG_ARCH_IXDP2401 is not set
 # CONFIG_ARCH_IXDP2801 is not set
+# CONFIG_IXP2000_SUPPORT_BROKEN_PCI_IO is not set
 
 #
 # Processor Type
@@ -106,7 +110,6 @@ CONFIG_CPU_32v5=y
 CONFIG_CPU_ABRT_EV5T=y
 CONFIG_CPU_CACHE_VIVT=y
 CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_MINICACHE=y
 
 #
 # Processor Features
@@ -118,9 +121,11 @@ CONFIG_XSCALE_PMU=y
 #
 # Bus support
 #
+CONFIG_ISA_DMA_API=y
 CONFIG_PCI=y
 CONFIG_PCI_LEGACY_PROC=y
 CONFIG_PCI_NAMES=y
+# CONFIG_PCI_DEBUG is not set
 
 #
 # PCCARD (PCMCIA/CardBus) support
@@ -130,7 +135,15 @@ CONFIG_PCI_NAMES=y
 #
 # Kernel Features
 #
+# CONFIG_SMP is not set
 # CONFIG_PREEMPT is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_ALIGNMENT_TRAP=y
 
 #
@@ -269,7 +282,6 @@ CONFIG_MTD_IXP2000=y
 #
 # Block devices
 #
-# CONFIG_BLK_DEV_FD is not set
 # CONFIG_BLK_CPQ_DA is not set
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
@@ -308,6 +320,7 @@ CONFIG_IOSCHED_CFQ=y
 #
 # Fusion MPT device support
 #
+# CONFIG_FUSION is not set
 
 #
 # IEEE 1394 (FireWire) support
@@ -329,10 +342,11 @@ CONFIG_NET=y
 #
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
-# CONFIG_NETLINK_DEV is not set
 CONFIG_UNIX=y
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
 # CONFIG_IP_MULTICAST is not set
 # CONFIG_IP_ADVANCED_ROUTER is not set
 CONFIG_IP_PNP=y
@@ -349,6 +363,17 @@ CONFIG_SYN_COOKIES=y
 # CONFIG_INET_TUNNEL is not set
 # CONFIG_IP_TCPDIAG is not set
 # CONFIG_IP_TCPDIAG_IPV6 is not set
+
+#
+# TCP congestion control
+#
+CONFIG_TCP_CONG_BIC=y
+CONFIG_TCP_CONG_WESTWOOD=m
+CONFIG_TCP_CONG_HTCP=m
+# CONFIG_TCP_CONG_HSTCP is not set
+# CONFIG_TCP_CONG_HYBLA is not set
+# CONFIG_TCP_CONG_VEGAS is not set
+# CONFIG_TCP_CONG_SCALABLE is not set
 # CONFIG_IPV6 is not set
 # CONFIG_NETFILTER is not set
 
@@ -404,6 +429,7 @@ CONFIG_MII=y
 # CONFIG_SUNGEM is not set
 # CONFIG_NET_VENDOR_3COM is not set
 # CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
 
 #
 # Tulip family network device support
@@ -440,9 +466,11 @@ CONFIG_EEPRO100=y
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
 # CONFIG_R8169 is not set
+# CONFIG_SKGE is not set
 # CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
 
 #
 # Ethernet (10000 Mbit)
@@ -464,6 +492,7 @@ CONFIG_EEPRO100=y
 # Wan interfaces
 #
 CONFIG_WAN=y
+# CONFIG_DSCC4 is not set
 # CONFIG_LANMEDIA is not set
 # CONFIG_SYNCLINK_SYNCPPP is not set
 CONFIG_HDLC=y
@@ -526,7 +555,6 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 #
 # CONFIG_SERIO is not set
 # CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
 
 #
 # Character devices
@@ -547,6 +575,7 @@ CONFIG_SERIAL_8250_NR_UARTS=2
 #
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -613,17 +642,18 @@ CONFIG_I2C_ALGOBIT=y
 # CONFIG_I2C_AMD8111 is not set
 # CONFIG_I2C_I801 is not set
 # CONFIG_I2C_I810 is not set
+# CONFIG_I2C_PIIX4 is not set
 # CONFIG_I2C_ISA is not set
 # CONFIG_I2C_IXP2000 is not set
 # CONFIG_I2C_NFORCE2 is not set
 # CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PIIX4 is not set
 # CONFIG_I2C_PROSAVAGE is not set
 # CONFIG_I2C_SAVAGE4 is not set
 # CONFIG_SCx200_ACB is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_STUB is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
 # CONFIG_I2C_VOODOO3 is not set
@@ -637,7 +667,9 @@ CONFIG_I2C_SENSOR=y
 # CONFIG_SENSORS_ADM1025 is not set
 # CONFIG_SENSORS_ADM1026 is not set
 # CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
 # CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_FSCHER is not set
 # CONFIG_SENSORS_FSCPOS is not set
@@ -653,6 +685,7 @@ CONFIG_I2C_SENSOR=y
 # CONFIG_SENSORS_LM85 is not set
 # CONFIG_SENSORS_LM87 is not set
 # CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
@@ -662,14 +695,19 @@ CONFIG_I2C_SENSOR=y
 # CONFIG_SENSORS_W83781D is not set
 # CONFIG_SENSORS_W83L785TS is not set
 # CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
 
 #
 # Other I2C Chip support
 #
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
 CONFIG_SENSORS_EEPROM=y
 # CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_RTC8564 is not set
+# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
@@ -723,6 +761,7 @@ CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
 # CONFIG_EXT2_FS_SECURITY is not set
+# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
@@ -763,7 +802,6 @@ CONFIG_DNOTIFY=y
 #
 CONFIG_PROC_FS=y
 CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
 # CONFIG_DEVPTS_FS_XATTR is not set
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_XATTR is not set
@@ -801,12 +839,14 @@ CONFIG_JFFS2_RTIME=y
 #
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
 # CONFIG_NFS_DIRECTIO is not set
 # CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
@@ -891,3 +931,4 @@ CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
+# CONFIG_TEXTSEARCH is not set

arch/arm/configs/ixdp2400_defconfig

@@ -1,14 +1,13 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc1-bk2
-# Sun Mar 27 21:13:38 2005
+# Linux kernel version: 2.6.12-git6
+# Sat Jun 25 00:58:38 2005
 #
 CONFIG_ARM=y
 CONFIG_MMU=y
 CONFIG_UID16=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
 
 #
 # Code maturity level options
@@ -16,6 +15,7 @@ CONFIG_GENERIC_IOMAP=y
 CONFIG_EXPERIMENTAL=y
 CONFIG_CLEAN_COMPILE=y
 CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
 
 #
 # General setup
@@ -35,6 +35,8 @@ CONFIG_EMBEDDED=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
@@ -82,6 +84,7 @@ CONFIG_ARCH_IXP2000=y
 # CONFIG_ARCH_VERSATILE is not set
 # CONFIG_ARCH_IMX is not set
 # CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_AAEC2000 is not set
 CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y
 
 #
@@ -97,6 +100,7 @@ CONFIG_ARCH_IXDP2400=y
 CONFIG_ARCH_IXDP2X00=y
 # CONFIG_ARCH_IXDP2401 is not set
 # CONFIG_ARCH_IXDP2801 is not set
+# CONFIG_IXP2000_SUPPORT_BROKEN_PCI_IO is not set
 
 #
 # Processor Type
@@ -107,7 +111,6 @@ CONFIG_CPU_32v5=y
 CONFIG_CPU_ABRT_EV5T=y
 CONFIG_CPU_CACHE_VIVT=y
 CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_MINICACHE=y
 
 #
 # Processor Features
@@ -119,9 +122,11 @@ CONFIG_XSCALE_PMU=y
 #
 # Bus support
 #
+CONFIG_ISA_DMA_API=y
 CONFIG_PCI=y
 CONFIG_PCI_LEGACY_PROC=y
 CONFIG_PCI_NAMES=y
+# CONFIG_PCI_DEBUG is not set
 
 #
 # PCCARD (PCMCIA/CardBus) support
@@ -131,7 +136,15 @@ CONFIG_PCI_NAMES=y
 #
 # Kernel Features
 #
+# CONFIG_SMP is not set
 # CONFIG_PREEMPT is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_ALIGNMENT_TRAP=y
 
 #
@@ -270,7 +283,6 @@ CONFIG_MTD_IXP2000=y
 #
 # Block devices
 #
-# CONFIG_BLK_DEV_FD is not set
 # CONFIG_BLK_CPQ_DA is not set
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
@@ -309,6 +321,7 @@ CONFIG_IOSCHED_CFQ=y
 #
 # Fusion MPT device support
 #
+# CONFIG_FUSION is not set
 
 #
 # IEEE 1394 (FireWire) support
@@ -330,10 +343,11 @@ CONFIG_NET=y
 #
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
-# CONFIG_NETLINK_DEV is not set
 CONFIG_UNIX=y
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
 # CONFIG_IP_MULTICAST is not set
 # CONFIG_IP_ADVANCED_ROUTER is not set
 CONFIG_IP_PNP=y
@@ -350,6 +364,17 @@ CONFIG_SYN_COOKIES=y
 # CONFIG_INET_TUNNEL is not set
 # CONFIG_IP_TCPDIAG is not set
 # CONFIG_IP_TCPDIAG_IPV6 is not set
+
+#
+# TCP congestion control
+#
+CONFIG_TCP_CONG_BIC=y
+CONFIG_TCP_CONG_WESTWOOD=m
+CONFIG_TCP_CONG_HTCP=m
+# CONFIG_TCP_CONG_HSTCP is not set
+# CONFIG_TCP_CONG_HYBLA is not set
+# CONFIG_TCP_CONG_VEGAS is not set
+# CONFIG_TCP_CONG_SCALABLE is not set
 # CONFIG_IPV6 is not set
 # CONFIG_NETFILTER is not set
 
@@ -405,6 +430,7 @@ CONFIG_MII=y
 # CONFIG_SUNGEM is not set
 # CONFIG_NET_VENDOR_3COM is not set
 # CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
 
 #
 # Tulip family network device support
@@ -441,9 +467,11 @@ CONFIG_EEPRO100=y
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
 # CONFIG_R8169 is not set
+# CONFIG_SKGE is not set
 # CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
 
 #
 # Ethernet (10000 Mbit)
@@ -465,6 +493,7 @@ CONFIG_EEPRO100=y
 # Wan interfaces
 #
 CONFIG_WAN=y
+# CONFIG_DSCC4 is not set
 # CONFIG_LANMEDIA is not set
 # CONFIG_SYNCLINK_SYNCPPP is not set
 CONFIG_HDLC=y
@@ -527,7 +556,6 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 #
 # CONFIG_SERIO is not set
 # CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
 
 #
 # Character devices
@@ -548,6 +576,7 @@ CONFIG_SERIAL_8250_NR_UARTS=2
 #
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -614,17 +643,18 @@ CONFIG_I2C_ALGOBIT=y
 # CONFIG_I2C_AMD8111 is not set
 # CONFIG_I2C_I801 is not set
 # CONFIG_I2C_I810 is not set
+# CONFIG_I2C_PIIX4 is not set
 # CONFIG_I2C_ISA is not set
 # CONFIG_I2C_IXP2000 is not set
 # CONFIG_I2C_NFORCE2 is not set
 # CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PIIX4 is not set
 # CONFIG_I2C_PROSAVAGE is not set
 # CONFIG_I2C_SAVAGE4 is not set
 # CONFIG_SCx200_ACB is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_STUB is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
 # CONFIG_I2C_VOODOO3 is not set
@@ -638,7 +668,9 @@ CONFIG_I2C_SENSOR=y
 # CONFIG_SENSORS_ADM1025 is not set
 # CONFIG_SENSORS_ADM1026 is not set
 # CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
 # CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_FSCHER is not set
 # CONFIG_SENSORS_FSCPOS is not set
@@ -654,6 +686,7 @@ CONFIG_I2C_SENSOR=y
 # CONFIG_SENSORS_LM85 is not set
 # CONFIG_SENSORS_LM87 is not set
 # CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
@@ -663,14 +696,19 @@ CONFIG_I2C_SENSOR=y
 # CONFIG_SENSORS_W83781D is not set
 # CONFIG_SENSORS_W83L785TS is not set
 # CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
 
 #
 # Other I2C Chip support
 #
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
 CONFIG_SENSORS_EEPROM=y
 # CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_RTC8564 is not set
+# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
@@ -724,6 +762,7 @@ CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
 # CONFIG_EXT2_FS_SECURITY is not set
+# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
@@ -764,7 +803,6 @@ CONFIG_DNOTIFY=y
 #
 CONFIG_PROC_FS=y
 CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
 # CONFIG_DEVPTS_FS_XATTR is not set
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_XATTR is not set
@@ -802,12 +840,14 @@ CONFIG_JFFS2_RTIME=y
 #
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
 # CONFIG_NFS_DIRECTIO is not set
 # CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
@@ -892,3 +932,4 @@ CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
+# CONFIG_TEXTSEARCH is not set

arch/arm/configs/ixdp2401_defconfig

@@ -1,14 +1,13 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc1-bk2
-# Sun Mar 27 21:53:55 2005
+# Linux kernel version: 2.6.12-git6
+# Sat Jun 25 00:59:35 2005
 #
 CONFIG_ARM=y
 CONFIG_MMU=y
 CONFIG_UID16=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
 
 #
 # Code maturity level options
@@ -16,6 +15,7 @@ CONFIG_GENERIC_IOMAP=y
 CONFIG_EXPERIMENTAL=y
 CONFIG_CLEAN_COMPILE=y
 CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
 
 #
 # General setup
@@ -35,6 +35,8 @@ CONFIG_EMBEDDED=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
@@ -82,6 +84,7 @@ CONFIG_ARCH_IXP2000=y
 # CONFIG_ARCH_VERSATILE is not set
 # CONFIG_ARCH_IMX is not set
 # CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_AAEC2000 is not set
 CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y
 
 #
@@ -97,6 +100,7 @@ CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y
 CONFIG_ARCH_IXDP2401=y
 # CONFIG_ARCH_IXDP2801 is not set
 CONFIG_ARCH_IXDP2X01=y
+# CONFIG_IXP2000_SUPPORT_BROKEN_PCI_IO is not set
 
 #
 # Processor Type
@@ -107,7 +111,6 @@ CONFIG_CPU_32v5=y
 CONFIG_CPU_ABRT_EV5T=y
 CONFIG_CPU_CACHE_VIVT=y
 CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_MINICACHE=y
 
 #
 # Processor Features
@@ -119,9 +122,11 @@ CONFIG_XSCALE_PMU=y
 #
 # Bus support
 #
+CONFIG_ISA_DMA_API=y
 CONFIG_PCI=y
 CONFIG_PCI_LEGACY_PROC=y
 CONFIG_PCI_NAMES=y
+# CONFIG_PCI_DEBUG is not set
 
 #
 # PCCARD (PCMCIA/CardBus) support
@@ -131,7 +136,15 @@ CONFIG_PCI_NAMES=y
 #
 # Kernel Features
 #
+# CONFIG_SMP is not set
 # CONFIG_PREEMPT is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_ALIGNMENT_TRAP=y
 
 #
@@ -270,7 +283,6 @@ CONFIG_MTD_IXP2000=y
 #
 # Block devices
 #
-# CONFIG_BLK_DEV_FD is not set
 # CONFIG_BLK_CPQ_DA is not set
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
@@ -309,6 +321,7 @@ CONFIG_IOSCHED_CFQ=y
 #
 # Fusion MPT device support
 #
+# CONFIG_FUSION is not set
 
 #
 # IEEE 1394 (FireWire) support
@@ -330,10 +343,11 @@ CONFIG_NET=y
 #
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
-# CONFIG_NETLINK_DEV is not set
 CONFIG_UNIX=y
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
 # CONFIG_IP_MULTICAST is not set
 # CONFIG_IP_ADVANCED_ROUTER is not set
 CONFIG_IP_PNP=y
@@ -350,6 +364,17 @@ CONFIG_SYN_COOKIES=y
 # CONFIG_INET_TUNNEL is not set
 CONFIG_IP_TCPDIAG=y
 # CONFIG_IP_TCPDIAG_IPV6 is not set
+
+#
+# TCP congestion control
+#
+CONFIG_TCP_CONG_BIC=y
+CONFIG_TCP_CONG_WESTWOOD=m
+CONFIG_TCP_CONG_HTCP=m
+# CONFIG_TCP_CONG_HSTCP is not set
+# CONFIG_TCP_CONG_HYBLA is not set
+# CONFIG_TCP_CONG_VEGAS is not set
+# CONFIG_TCP_CONG_SCALABLE is not set
 # CONFIG_IPV6 is not set
 # CONFIG_NETFILTER is not set
 
@@ -405,6 +430,7 @@ CONFIG_MII=y
 # CONFIG_SUNGEM is not set
 # CONFIG_NET_VENDOR_3COM is not set
 # CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
 
 #
 # Tulip family network device support
@@ -442,9 +468,11 @@ CONFIG_EEPRO100=y
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
 # CONFIG_R8169 is not set
+# CONFIG_SKGE is not set
 # CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
 
 #
 # Ethernet (10000 Mbit)
@@ -466,6 +494,7 @@ CONFIG_EEPRO100=y
 # Wan interfaces
 #
 CONFIG_WAN=y
+# CONFIG_DSCC4 is not set
 # CONFIG_LANMEDIA is not set
 # CONFIG_SYNCLINK_SYNCPPP is not set
 CONFIG_HDLC=y
@@ -528,7 +557,6 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 #
 # CONFIG_SERIO is not set
 # CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
 
 #
 # Character devices
@@ -549,6 +577,7 @@ CONFIG_SERIAL_8250_NR_UARTS=2
 #
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -615,17 +644,18 @@ CONFIG_I2C_ALGOBIT=y
 # CONFIG_I2C_AMD8111 is not set
 # CONFIG_I2C_I801 is not set
 # CONFIG_I2C_I810 is not set
+# CONFIG_I2C_PIIX4 is not set
 # CONFIG_I2C_ISA is not set
 # CONFIG_I2C_IXP2000 is not set
 # CONFIG_I2C_NFORCE2 is not set
 # CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PIIX4 is not set
 # CONFIG_I2C_PROSAVAGE is not set
 # CONFIG_I2C_SAVAGE4 is not set
 # CONFIG_SCx200_ACB is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_STUB is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
 # CONFIG_I2C_VOODOO3 is not set
@@ -639,7 +669,9 @@ CONFIG_I2C_SENSOR=y
 # CONFIG_SENSORS_ADM1025 is not set
 # CONFIG_SENSORS_ADM1026 is not set
 # CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
 # CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_FSCHER is not set
 # CONFIG_SENSORS_FSCPOS is not set
@@ -655,6 +687,7 @@ CONFIG_I2C_SENSOR=y
 # CONFIG_SENSORS_LM85 is not set
 # CONFIG_SENSORS_LM87 is not set
 # CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
@@ -664,14 +697,19 @@ CONFIG_I2C_SENSOR=y
 # CONFIG_SENSORS_W83781D is not set
 # CONFIG_SENSORS_W83L785TS is not set
 # CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
 
 #
 # Other I2C Chip support
 #
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
 CONFIG_SENSORS_EEPROM=y
 # CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_RTC8564 is not set
+# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
@@ -725,6 +763,7 @@ CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
 # CONFIG_EXT2_FS_SECURITY is not set
+# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
@@ -765,7 +804,6 @@ CONFIG_DNOTIFY=y
 #
 CONFIG_PROC_FS=y
 CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
 # CONFIG_DEVPTS_FS_XATTR is not set
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_XATTR is not set
@@ -803,12 +841,14 @@ CONFIG_JFFS2_RTIME=y
 #
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
 # CONFIG_NFS_DIRECTIO is not set
 # CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
@@ -893,3 +933,4 @@ CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
+# CONFIG_TEXTSEARCH is not set

arch/arm/configs/ixdp2800_defconfig

@@ -1,14 +1,13 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc1-bk2
-# Sun Mar 27 22:15:23 2005
+# Linux kernel version: 2.6.12-git6
+# Sat Jun 25 01:00:27 2005
 #
 CONFIG_ARM=y
 CONFIG_MMU=y
 CONFIG_UID16=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
 
 #
 # Code maturity level options
@@ -16,6 +15,7 @@ CONFIG_GENERIC_IOMAP=y
 CONFIG_EXPERIMENTAL=y
 CONFIG_CLEAN_COMPILE=y
 CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
 
 #
 # General setup
@@ -35,6 +35,8 @@ CONFIG_EMBEDDED=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
@@ -82,6 +84,7 @@ CONFIG_ARCH_IXP2000=y
 # CONFIG_ARCH_VERSATILE is not set
 # CONFIG_ARCH_IMX is not set
 # CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_AAEC2000 is not set
 CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y
 
 #
@@ -97,6 +100,7 @@ CONFIG_ARCH_IXDP2800=y
 CONFIG_ARCH_IXDP2X00=y
 # CONFIG_ARCH_IXDP2401 is not set
 # CONFIG_ARCH_IXDP2801 is not set
+# CONFIG_IXP2000_SUPPORT_BROKEN_PCI_IO is not set
 
 #
 # Processor Type
@@ -107,7 +111,6 @@ CONFIG_CPU_32v5=y
 CONFIG_CPU_ABRT_EV5T=y
 CONFIG_CPU_CACHE_VIVT=y
 CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_MINICACHE=y
 
 #
 # Processor Features
@@ -119,9 +122,11 @@ CONFIG_XSCALE_PMU=y
 #
 # Bus support
 #
+CONFIG_ISA_DMA_API=y
 CONFIG_PCI=y
 CONFIG_PCI_LEGACY_PROC=y
 CONFIG_PCI_NAMES=y
+# CONFIG_PCI_DEBUG is not set
 
 #
 # PCCARD (PCMCIA/CardBus) support
@@ -131,7 +136,15 @@ CONFIG_PCI_NAMES=y
 #
 # Kernel Features
 #
+# CONFIG_SMP is not set
 # CONFIG_PREEMPT is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_ALIGNMENT_TRAP=y
 
 #
@@ -270,7 +283,6 @@ CONFIG_MTD_IXP2000=y
 #
 # Block devices
 #
-# CONFIG_BLK_DEV_FD is not set
 # CONFIG_BLK_CPQ_DA is not set
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
@@ -309,6 +321,7 @@ CONFIG_IOSCHED_CFQ=y
 #
 # Fusion MPT device support
 #
+# CONFIG_FUSION is not set
 
 #
 # IEEE 1394 (FireWire) support
@@ -330,10 +343,11 @@ CONFIG_NET=y
 #
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
-# CONFIG_NETLINK_DEV is not set
 CONFIG_UNIX=y
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
 # CONFIG_IP_MULTICAST is not set
 # CONFIG_IP_ADVANCED_ROUTER is not set
 CONFIG_IP_PNP=y
@@ -350,6 +364,17 @@ CONFIG_SYN_COOKIES=y
 # CONFIG_INET_TUNNEL is not set
 # CONFIG_IP_TCPDIAG is not set
 # CONFIG_IP_TCPDIAG_IPV6 is not set
+
+#
+# TCP congestion control
+#
+CONFIG_TCP_CONG_BIC=y
+CONFIG_TCP_CONG_WESTWOOD=m
+CONFIG_TCP_CONG_HTCP=m
+# CONFIG_TCP_CONG_HSTCP is not set
+# CONFIG_TCP_CONG_HYBLA is not set
+# CONFIG_TCP_CONG_VEGAS is not set
+# CONFIG_TCP_CONG_SCALABLE is not set
 # CONFIG_IPV6 is not set
 # CONFIG_NETFILTER is not set
 
@@ -405,6 +430,7 @@ CONFIG_MII=y
 # CONFIG_SUNGEM is not set
 # CONFIG_NET_VENDOR_3COM is not set
 # CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
 
 #
 # Tulip family network device support
@@ -441,9 +467,11 @@ CONFIG_EEPRO100=y
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
 # CONFIG_R8169 is not set
+# CONFIG_SKGE is not set
 # CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
 
 #
 # Ethernet (10000 Mbit)
@@ -465,6 +493,7 @@ CONFIG_EEPRO100=y
 # Wan interfaces
 #
 CONFIG_WAN=y
+# CONFIG_DSCC4 is not set
 # CONFIG_LANMEDIA is not set
 # CONFIG_SYNCLINK_SYNCPPP is not set
 CONFIG_HDLC=y
@@ -527,7 +556,6 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 #
 # CONFIG_SERIO is not set
 # CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
 
 #
 # Character devices
@@ -548,6 +576,7 @@ CONFIG_SERIAL_8250_NR_UARTS=2
 #
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -614,17 +643,18 @@ CONFIG_I2C_ALGOBIT=y
 # CONFIG_I2C_AMD8111 is not set
 # CONFIG_I2C_I801 is not set
 # CONFIG_I2C_I810 is not set
+# CONFIG_I2C_PIIX4 is not set
 # CONFIG_I2C_ISA is not set
 # CONFIG_I2C_IXP2000 is not set
 # CONFIG_I2C_NFORCE2 is not set
 # CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PIIX4 is not set
 # CONFIG_I2C_PROSAVAGE is not set
 # CONFIG_I2C_SAVAGE4 is not set
 # CONFIG_SCx200_ACB is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_STUB is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
 # CONFIG_I2C_VOODOO3 is not set
@@ -638,7 +668,9 @@ CONFIG_I2C_SENSOR=y
 # CONFIG_SENSORS_ADM1025 is not set
 # CONFIG_SENSORS_ADM1026 is not set
 # CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
 # CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_FSCHER is not set
 # CONFIG_SENSORS_FSCPOS is not set
@@ -654,6 +686,7 @@ CONFIG_I2C_SENSOR=y
 # CONFIG_SENSORS_LM85 is not set
 # CONFIG_SENSORS_LM87 is not set
 # CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
@@ -663,14 +696,19 @@ CONFIG_I2C_SENSOR=y
 # CONFIG_SENSORS_W83781D is not set
 # CONFIG_SENSORS_W83L785TS is not set
 # CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
 
 #
 # Other I2C Chip support
 #
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
 CONFIG_SENSORS_EEPROM=y
 # CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_RTC8564 is not set
+# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
@@ -724,6 +762,7 @@ CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
 # CONFIG_EXT2_FS_SECURITY is not set
+# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
@@ -764,7 +803,6 @@ CONFIG_DNOTIFY=y
 #
 CONFIG_PROC_FS=y
 CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
 # CONFIG_DEVPTS_FS_XATTR is not set
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_XATTR is not set
@@ -802,12 +840,14 @@ CONFIG_JFFS2_RTIME=y
 #
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
 # CONFIG_NFS_DIRECTIO is not set
 # CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
@@ -892,3 +932,4 @@ CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
+# CONFIG_TEXTSEARCH is not set

arch/arm/configs/ixdp2801_defconfig

@@ -1,14 +1,13 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc1-bk2
-# Sun Mar 27 22:39:19 2005
+# Linux kernel version: 2.6.12-git6
+# Sat Jun 25 01:01:18 2005
 #
 CONFIG_ARM=y
 CONFIG_MMU=y
 CONFIG_UID16=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
 
 #
 # Code maturity level options
@@ -16,6 +15,7 @@ CONFIG_GENERIC_IOMAP=y
 CONFIG_EXPERIMENTAL=y
 CONFIG_CLEAN_COMPILE=y
 CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
 
 #
 # General setup
@@ -35,6 +35,8 @@ CONFIG_EMBEDDED=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
@@ -82,6 +84,7 @@ CONFIG_ARCH_IXP2000=y
 # CONFIG_ARCH_VERSATILE is not set
 # CONFIG_ARCH_IMX is not set
 # CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_AAEC2000 is not set
 CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y
 
 #
@@ -97,6 +100,7 @@ CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y
 # CONFIG_ARCH_IXDP2401 is not set
 CONFIG_ARCH_IXDP2801=y
 CONFIG_ARCH_IXDP2X01=y
+# CONFIG_IXP2000_SUPPORT_BROKEN_PCI_IO is not set
 
 #
 # Processor Type
@@ -107,7 +111,6 @@ CONFIG_CPU_32v5=y
 CONFIG_CPU_ABRT_EV5T=y
 CONFIG_CPU_CACHE_VIVT=y
 CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_MINICACHE=y
 
 #
 # Processor Features
@@ -119,9 +122,11 @@ CONFIG_XSCALE_PMU=y
 #
 # Bus support
 #
+CONFIG_ISA_DMA_API=y
 CONFIG_PCI=y
 CONFIG_PCI_LEGACY_PROC=y
 CONFIG_PCI_NAMES=y
+# CONFIG_PCI_DEBUG is not set
 
 #
 # PCCARD (PCMCIA/CardBus) support
@@ -131,7 +136,15 @@ CONFIG_PCI_NAMES=y
 #
 # Kernel Features
 #
+# CONFIG_SMP is not set
 # CONFIG_PREEMPT is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_ALIGNMENT_TRAP=y
 
 #
@@ -270,7 +283,6 @@ CONFIG_MTD_IXP2000=y
 #
 # Block devices
 #
-# CONFIG_BLK_DEV_FD is not set
 # CONFIG_BLK_CPQ_DA is not set
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
@@ -309,6 +321,7 @@ CONFIG_IOSCHED_CFQ=y
 #
 # Fusion MPT device support
 #
+# CONFIG_FUSION is not set
 
 #
 # IEEE 1394 (FireWire) support
@@ -330,10 +343,11 @@ CONFIG_NET=y
 #
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
-# CONFIG_NETLINK_DEV is not set
 CONFIG_UNIX=y
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
 # CONFIG_IP_MULTICAST is not set
 # CONFIG_IP_ADVANCED_ROUTER is not set
 CONFIG_IP_PNP=y
@@ -350,6 +364,17 @@ CONFIG_SYN_COOKIES=y
 # CONFIG_INET_TUNNEL is not set
 # CONFIG_IP_TCPDIAG is not set
 # CONFIG_IP_TCPDIAG_IPV6 is not set
+
+#
+# TCP congestion control
+#
+CONFIG_TCP_CONG_BIC=y
+CONFIG_TCP_CONG_WESTWOOD=m
+CONFIG_TCP_CONG_HTCP=m
+# CONFIG_TCP_CONG_HSTCP is not set
+# CONFIG_TCP_CONG_HYBLA is not set
+# CONFIG_TCP_CONG_VEGAS is not set
+# CONFIG_TCP_CONG_SCALABLE is not set
 # CONFIG_IPV6 is not set
 # CONFIG_NETFILTER is not set
 
@@ -405,6 +430,7 @@ CONFIG_MII=y
 # CONFIG_SUNGEM is not set
 # CONFIG_NET_VENDOR_3COM is not set
 # CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
 
 #
 # Tulip family network device support
@@ -442,9 +468,11 @@ CONFIG_EEPRO100=y
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
 # CONFIG_R8169 is not set
+# CONFIG_SKGE is not set
 # CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
 
 #
 # Ethernet (10000 Mbit)
@@ -466,6 +494,7 @@ CONFIG_EEPRO100=y
 # Wan interfaces
 #
 CONFIG_WAN=y
+# CONFIG_DSCC4 is not set
 # CONFIG_LANMEDIA is not set
 # CONFIG_SYNCLINK_SYNCPPP is not set
 CONFIG_HDLC=y
@@ -528,7 +557,6 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 #
 # CONFIG_SERIO is not set
 # CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
 
 #
 # Character devices
@@ -549,6 +577,7 @@ CONFIG_SERIAL_8250_NR_UARTS=2
 #
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -615,17 +644,18 @@ CONFIG_I2C_ALGOBIT=y
 # CONFIG_I2C_AMD8111 is not set
 # CONFIG_I2C_I801 is not set
 # CONFIG_I2C_I810 is not set
+# CONFIG_I2C_PIIX4 is not set
 # CONFIG_I2C_ISA is not set
 # CONFIG_I2C_IXP2000 is not set
 # CONFIG_I2C_NFORCE2 is not set
 # CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PIIX4 is not set
 # CONFIG_I2C_PROSAVAGE is not set
 # CONFIG_I2C_SAVAGE4 is not set
 # CONFIG_SCx200_ACB is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_STUB is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
 # CONFIG_I2C_VOODOO3 is not set
@@ -639,7 +669,9 @@ CONFIG_I2C_SENSOR=y
 # CONFIG_SENSORS_ADM1025 is not set
 # CONFIG_SENSORS_ADM1026 is not set
 # CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
 # CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_FSCHER is not set
 # CONFIG_SENSORS_FSCPOS is not set
@@ -655,6 +687,7 @@ CONFIG_I2C_SENSOR=y
 # CONFIG_SENSORS_LM85 is not set
 # CONFIG_SENSORS_LM87 is not set
 # CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
@@ -664,14 +697,19 @@ CONFIG_I2C_SENSOR=y
 # CONFIG_SENSORS_W83781D is not set
 # CONFIG_SENSORS_W83L785TS is not set
 # CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
 
 #
 # Other I2C Chip support
 #
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
 CONFIG_SENSORS_EEPROM=y
 # CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_RTC8564 is not set
+# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
@@ -725,6 +763,7 @@ CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
 # CONFIG_EXT2_FS_SECURITY is not set
+# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
@@ -765,7 +804,6 @@ CONFIG_DNOTIFY=y
 #
 CONFIG_PROC_FS=y
 CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
 # CONFIG_DEVPTS_FS_XATTR is not set
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_XATTR is not set
@@ -803,12 +841,14 @@ CONFIG_JFFS2_RTIME=y
 #
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
 # CONFIG_NFS_DIRECTIO is not set
 # CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
@@ -893,3 +933,4 @@ CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
+# CONFIG_TEXTSEARCH is not set

arch/arm/kernel/irq.c

@@ -4,6 +4,10 @@
  *  Copyright (C) 1992 Linus Torvalds
  *  Modifications for ARM processor Copyright (C) 1995-2000 Russell King.
  *
+ *  Support for Dynamic Tick Timer Copyright (C) 2004-2005 Nokia Corporation.
+ *  Dynamic Tick Timer written by Tony Lindgren <tony@atomide.com> and
+ *  Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>.
+ *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
@@ -37,6 +41,7 @@
 #include <asm/irq.h>
 #include <asm/system.h>
 #include <asm/mach/irq.h>
+#include <asm/mach/time.h>
 
 /*
  * Maximum IRQ count.  Currently, this is arbitary.  However, it should
@@ -329,6 +334,15 @@ __do_irq(unsigned int irq, struct irqaction *action, struct pt_regs *regs)
 
 	spin_unlock(&irq_controller_lock);
 
+#ifdef CONFIG_NO_IDLE_HZ
+	if (!(action->flags & SA_TIMER) && system_timer->dyn_tick != NULL) {
+		write_seqlock(&xtime_lock);
+		if (system_timer->dyn_tick->state & DYN_TICK_ENABLED)
+			system_timer->dyn_tick->handler(irq, 0, regs);
+		write_sequnlock(&xtime_lock);
+	}
+#endif
+
 	if (!(action->flags & SA_INTERRUPT))
 		local_irq_enable();
 

arch/arm/kernel/signal.c

@@ -697,7 +697,7 @@ static int do_signal(sigset_t *oldset, struct pt_regs *regs, int syscall)
 	if (!user_mode(regs))
 		return 0;
 
-	if (try_to_freeze(0))
+	if (try_to_freeze())
 		goto no_signal;
 
 	if (current->ptrace & PT_SINGLESTEP)

arch/arm/kernel/time.c

@@ -381,6 +381,95 @@ static struct sysdev_class timer_sysclass = {
 	.resume		= timer_resume,
 };
 
+#ifdef CONFIG_NO_IDLE_HZ
+static int timer_dyn_tick_enable(void)
+{
+	struct dyn_tick_timer *dyn_tick = system_timer->dyn_tick;
+	unsigned long flags;
+	int ret = -ENODEV;
+
+	if (dyn_tick) {
+		write_seqlock_irqsave(&xtime_lock, flags);
+		ret = 0;
+		if (!(dyn_tick->state & DYN_TICK_ENABLED)) {
+			ret = dyn_tick->enable();
+
+			if (ret == 0)
+				dyn_tick->state |= DYN_TICK_ENABLED;
+		}
+		write_sequnlock_irqrestore(&xtime_lock, flags);
+	}
+
+	return ret;
+}
+
+static int timer_dyn_tick_disable(void)
+{
+	struct dyn_tick_timer *dyn_tick = system_timer->dyn_tick;
+	unsigned long flags;
+	int ret = -ENODEV;
+
+	if (dyn_tick) {
+		write_seqlock_irqsave(&xtime_lock, flags);
+		ret = 0;
+		if (dyn_tick->state & DYN_TICK_ENABLED) {
+			ret = dyn_tick->disable();
+
+			if (ret == 0)
+				dyn_tick->state &= ~DYN_TICK_ENABLED;
+		}
+		write_sequnlock_irqrestore(&xtime_lock, flags);
+	}
+
+	return ret;
+}
+
+void timer_dyn_reprogram(void)
+{
+	struct dyn_tick_timer *dyn_tick = system_timer->dyn_tick;
+	unsigned long flags;
+
+	write_seqlock_irqsave(&xtime_lock, flags);
+	if (dyn_tick->state & DYN_TICK_ENABLED)
+		dyn_tick->reprogram(next_timer_interrupt() - jiffies);
+	write_sequnlock_irqrestore(&xtime_lock, flags);
+}
+
+static ssize_t timer_show_dyn_tick(struct sys_device *dev, char *buf)
+{
+	return sprintf(buf, "%i\n",
+		       (system_timer->dyn_tick->state & DYN_TICK_ENABLED) >> 1);
+}
+
+static ssize_t timer_set_dyn_tick(struct sys_device *dev, const char *buf,
+				  size_t count)
+{
+	unsigned int enable = simple_strtoul(buf, NULL, 2);
+
+	if (enable)
+		timer_dyn_tick_enable();
+	else
+		timer_dyn_tick_disable();
+
+	return count;
+}
+static SYSDEV_ATTR(dyn_tick, 0644, timer_show_dyn_tick, timer_set_dyn_tick);
+
+/*
+ * dyntick=enable|disable
+ */
+static char dyntick_str[4] __initdata = "";
+
+static int __init dyntick_setup(char *str)
+{
+	if (str)
+		strlcpy(dyntick_str, str, sizeof(dyntick_str));
+	return 1;
+}
+
+__setup("dyntick=", dyntick_setup);
+#endif
+
 static int __init timer_init_sysfs(void)
 {
 	int ret = sysdev_class_register(&timer_sysclass);
@@ -388,6 +477,20 @@ static int __init timer_init_sysfs(void)
 		system_timer->dev.cls = &timer_sysclass;
 		ret = sysdev_register(&system_timer->dev);
 	}
+
+#ifdef CONFIG_NO_IDLE_HZ
+	if (ret == 0 && system_timer->dyn_tick) {
+		ret = sysdev_create_file(&system_timer->dev, &attr_dyn_tick);
+
+		/*
+		 * Turn on dynamic tick after calibrate delay
+		 * for correct bogomips
+		 */
+		if (ret == 0 && dyntick_str[0] == 'e')
+			ret = timer_dyn_tick_enable();
+	}
+#endif
+
 	return ret;
 }
 

arch/arm/mach-clps711x/Kconfig

@@ -28,7 +28,7 @@ config ARCH_CLEP7312
 config ARCH_EDB7211
 	bool "EDB7211"
 	select ISA
-	select DISCONTIGMEM
+	select ARCH_DISCONTIGMEM_ENABLE
 	help
 	  Say Y here if you intend to run this kernel on a Cirrus Logic EDB-7211
 	  evaluation board.

arch/arm/mach-ixp2000/Kconfig

@@ -54,6 +54,14 @@ config ARCH_IXDP2X01
 	depends on ARCH_IXDP2401 || ARCH_IXDP2801
 	default y	
 
+config IXP2000_SUPPORT_BROKEN_PCI_IO
+	bool "Support broken PCI I/O on older IXP2000s"
+	default y
+	help
+	  Say 'N' here if you only intend to run your kernel on an
+	  IXP2000 B0 or later model and do not need the PCI I/O
+	  byteswap workaround.  Say 'Y' otherwise.
+
 endmenu
 
 endif

arch/arm/mach-ixp2000/enp2611.c

@@ -197,8 +197,23 @@ static struct platform_device enp2611_flash = {
 	.resource	= &enp2611_flash_resource,
 };
 
+static struct ixp2000_i2c_pins enp2611_i2c_gpio_pins = {
+	.sda_pin	= ENP2611_GPIO_SDA,
+	.scl_pin	= ENP2611_GPIO_SCL,
+};
+
+static struct platform_device enp2611_i2c_controller = {
+	.name		= "IXP2000-I2C",
+	.id		= 0,
+	.dev		= {
+		.platform_data = &enp2611_i2c_gpio_pins
+	},
+	.num_resources	= 0
+};
+
 static struct platform_device *enp2611_devices[] __initdata = {
-	&enp2611_flash
+	&enp2611_flash,
+	&enp2611_i2c_controller
 };
 
 static void __init enp2611_init_machine(void)

arch/arm/mach-ixp2000/ixdp2x00.c

@@ -42,6 +42,9 @@
 #include <asm/mach/flash.h>
 #include <asm/mach/arch.h>
 
+#include <asm/arch/gpio.h>
+
+
 /*************************************************************************
  * IXDP2x00 IRQ Initialization
  *************************************************************************/

arch/arm/mach-ixp2000/pci.c

@@ -198,6 +198,19 @@ clear_master_aborts(void)
 void __init
 ixp2000_pci_preinit(void)
 {
+#ifndef CONFIG_IXP2000_SUPPORT_BROKEN_PCI_IO
+	/*
+	 * Configure the PCI unit to properly byteswap I/O transactions,
+	 * and verify that it worked.
+	 */
+	ixp2000_reg_write(IXP2000_PCI_CONTROL,
+			  (*IXP2000_PCI_CONTROL | PCI_CONTROL_IEE));
+
+	if ((*IXP2000_PCI_CONTROL & PCI_CONTROL_IEE) == 0)
+		panic("IXP2000: PCI I/O is broken on this ixp model, and "
+			"the needed workaround has not been configured in");
+#endif
+
 	hook_fault_code(16+6, ixp2000_pci_abort_handler, SIGBUS,
 				"PCI config cycle to non-existent device");
 }

arch/frv/kernel/setup.c

@@ -790,12 +790,10 @@ void __init setup_arch(char **cmdline_p)
 #ifndef CONFIG_GDBSTUB_UART0
 	__reg(UART0_BASE + UART_IER * 8) = 0;
 	early_serial_setup(&__frv_uart0);
-//	register_serial(&__frv_uart0);
 #endif
 #ifndef CONFIG_GDBSTUB_UART1
 	__reg(UART1_BASE + UART_IER * 8) = 0;
 	early_serial_setup(&__frv_uart1);
-//	register_serial(&__frv_uart1);
 #endif
 
 #if defined(CONFIG_CHR_DEV_FLASH) || defined(CONFIG_BLK_DEV_FLASH)

arch/frv/kernel/signal.c

@@ -536,10 +536,8 @@ int do_signal(struct pt_regs *regs, sigset_t *oldset)
 	if (!user_mode(regs))
 		return 1;
 
-	if (current->flags & PF_FREEZE) {
-		refrigerator(0);
+	if (try_to_freeze())
 		goto no_signal;
-	}
 
 	if (!oldset)
 		oldset = &current->blocked;

arch/h8300/kernel/signal.c

@@ -517,10 +517,8 @@ asmlinkage int do_signal(struct pt_regs *regs, sigset_t *oldset)
 	if ((regs->ccr & 0x10))
 		return 1;
 
-	if (current->flags & PF_FREEZE) {
-		refrigerator(0);
+	if (try_to_freeze())
 		goto no_signal;
-	}
 
 	current->thread.esp0 = (unsigned long) regs;
 

arch/i386/Kconfig

@@ -510,28 +510,7 @@ config SCHED_SMT
 	  cost of slightly increased overhead in some places. If unsure say
 	  N here.
 
-config PREEMPT
-	bool "Preemptible Kernel"
-	help
-	  This option reduces the latency of the kernel when reacting to
-	  real-time or interactive events by allowing a low priority process to
-	  be preempted even if it is in kernel mode executing a system call.
-	  This allows applications to run more reliably even when the system is
-	  under load.
-
-	  Say Y here if you are building a kernel for a desktop, embedded
-	  or real-time system.  Say N if you are unsure.
-
-config PREEMPT_BKL
-	bool "Preempt The Big Kernel Lock"
-	depends on PREEMPT
-	default y
-	help
-	  This option reduces the latency of the kernel by making the
-	  big kernel lock preemptible.
-
-	  Say Y here if you are building a kernel for a desktop system.
-	  Say N if you are unsure.
+source "kernel/Kconfig.preempt"
 
 config X86_UP_APIC
 	bool "Local APIC support on uniprocessors"
@@ -963,6 +942,41 @@ config SECCOMP
 
 source kernel/Kconfig.hz
 
+config PHYSICAL_START
+	hex "Physical address where the kernel is loaded" if EMBEDDED
+	default "0x100000"
+	help
+	  This gives the physical address where the kernel is loaded.
+	  Primarily used in the case of kexec on panic where the
+	  fail safe kernel needs to run at a different address than
+	  the panic-ed kernel.
+
+	  Don't change this unless you know what you are doing.
+
+config KEXEC
+	bool "kexec system call (EXPERIMENTAL)"
+	depends on EXPERIMENTAL
+	help
+	  kexec is a system call that implements the ability to shutdown your
+	  current kernel, and to start another kernel.  It is like a reboot
+	  but it is indepedent of the system firmware.   And like a reboot
+	  you can start any kernel with it, not just Linux.
+
+	  The name comes from the similiarity to the exec system call.
+
+	  It is an ongoing process to be certain the hardware in a machine
+	  is properly shutdown, so do not be surprised if this code does not
+	  initially work for you.  It may help to enable device hotplugging
+	  support.  As of this writing the exact hardware interface is
+	  strongly in flux, so no good recommendation can be made.
+
+config CRASH_DUMP
+	bool "kernel crash dumps (EXPERIMENTAL)"
+	depends on EMBEDDED
+	depends on EXPERIMENTAL
+	depends on HIGHMEM
+	help
+	  Generate crash dump after being started by kexec.
 endmenu
 
 
@@ -1250,6 +1264,15 @@ config SCx200
 	  This support is also available as a module.  If compiled as a
 	  module, it will be called scx200.
 
+config HOTPLUG_CPU
+	bool "Support for hot-pluggable CPUs (EXPERIMENTAL)"
+	depends on SMP && HOTPLUG && EXPERIMENTAL
+	---help---
+	  Say Y here to experiment with turning CPUs off and on.  CPUs
+	  can be controlled through /sys/devices/system/cpu.
+
+	  Say N.
+
 source "drivers/pcmcia/Kconfig"
 
 source "drivers/pci/hotplug/Kconfig"

arch/i386/boot/Makefile

@@ -25,8 +25,8 @@ SVGA_MODE := -DSVGA_MODE=NORMAL_VGA
 
 #RAMDISK := -DRAMDISK=512
 
-targets		:= vmlinux.bin bootsect bootsect.o setup setup.o \
-		   zImage bzImage
+targets		:= vmlinux.bin bootsect bootsect.o \
+		   setup setup.o zImage bzImage
 subdir- 	:= compressed
 
 hostprogs-y	:= tools/build

arch/i386/boot/compressed/head.S

@@ -25,6 +25,7 @@
 
 #include <linux/linkage.h>
 #include <asm/segment.h>
+#include <asm/page.h>
 
 	.globl startup_32
 	
@@ -74,7 +75,7 @@ startup_32:
 	popl %esi	# discard address
 	popl %esi	# real mode pointer
 	xorl %ebx,%ebx
-	ljmp $(__BOOT_CS), $0x100000
+	ljmp $(__BOOT_CS), $__PHYSICAL_START
 
 /*
  * We come here, if we were loaded high.
@@ -99,7 +100,7 @@ startup_32:
 	popl %ecx	# lcount
 	popl %edx	# high_buffer_start
 	popl %eax	# hcount
-	movl $0x100000,%edi
+	movl $__PHYSICAL_START,%edi
 	cli		# make sure we don't get interrupted
 	ljmp $(__BOOT_CS), $0x1000 # and jump to the move routine
 
@@ -124,5 +125,5 @@ move_routine_start:
 	movsl
 	movl %ebx,%esi	# Restore setup pointer
 	xorl %ebx,%ebx
-	ljmp $(__BOOT_CS), $0x100000
+	ljmp $(__BOOT_CS), $__PHYSICAL_START
 move_routine_end:

arch/i386/boot/compressed/misc.c

@@ -13,6 +13,7 @@
 #include <linux/vmalloc.h>
 #include <linux/tty.h>
 #include <asm/io.h>
+#include <asm/page.h>
 
 /*
  * gzip declarations
@@ -308,7 +309,7 @@ static void setup_normal_output_buffer(void)
 #else
 	if ((RM_ALT_MEM_K > RM_EXT_MEM_K ? RM_ALT_MEM_K : RM_EXT_MEM_K) < 1024) error("Less than 2MB of memory");
 #endif
-	output_data = (char *)0x100000; /* Points to 1M */
+	output_data = (char *)__PHYSICAL_START; /* Normally Points to 1M */
 	free_mem_end_ptr = (long)real_mode;
 }
 
@@ -333,8 +334,8 @@ static void setup_output_buffer_if_we_run_high(struct moveparams *mv)
 	low_buffer_size = low_buffer_end - LOW_BUFFER_START;
 	high_loaded = 1;
 	free_mem_end_ptr = (long)high_buffer_start;
-	if ( (0x100000 + low_buffer_size) > ((ulg)high_buffer_start)) {
-		high_buffer_start = (uch *)(0x100000 + low_buffer_size);
+	if ( (__PHYSICAL_START + low_buffer_size) > ((ulg)high_buffer_start)) {
+		high_buffer_start = (uch *)(__PHYSICAL_START + low_buffer_size);
 		mv->hcount = 0; /* say: we need not to move high_buffer */
 	}
 	else mv->hcount = -1;
@@ -353,7 +354,6 @@ static void close_output_buffer_if_we_run_high(struct moveparams *mv)
 	}
 }
 
-
 asmlinkage int decompress_kernel(struct moveparams *mv, void *rmode)
 {
 	real_mode = rmode;

arch/i386/boot/edd.S

@@ -6,7 +6,7 @@
  *   projects 1572D, 1484D, 1386D, 1226DT
  * disk signature read by Matt Domsch <Matt_Domsch@dell.com>
  *	and Andrew Wilks <Andrew_Wilks@dell.com> September 2003, June 2004
- * legacy CHS retreival by Patrick J. LoPresti <patl@users.sourceforge.net>
+ * legacy CHS retrieval by Patrick J. LoPresti <patl@users.sourceforge.net>
  *      March 2004
  * Command line option parsing, Matt Domsch, November 2004
  */

arch/i386/boot/setup.S

@@ -33,7 +33,7 @@
  * Transcribed from Intel (as86) -> AT&T (gas) by Chris Noe, May 1999.
  * <stiker@northlink.com>
  *
- * Fix to work around buggy BIOSes which dont use carry bit correctly
+ * Fix to work around buggy BIOSes which don't use carry bit correctly
  * and/or report extended memory in CX/DX for e801h memory size detection 
  * call.  As a result the kernel got wrong figures.  The int15/e801h docs
  * from Ralf Brown interrupt list seem to indicate AX/BX should be used
@@ -357,7 +357,7 @@ bail820:
 
 meme801:
 	stc					# fix to work around buggy
-	xorw	%cx,%cx				# BIOSes which dont clear/set
+	xorw	%cx,%cx				# BIOSes which don't clear/set
 	xorw	%dx,%dx				# carry on pass/error of
 						# e801h memory size call
 						# or merely pass cx,dx though
@@ -847,7 +847,7 @@ flush_instr:
 #
 #	but we yet haven't reloaded the CS register, so the default size 
 #	of the target offset still is 16 bit.
-#       However, using an operand prefix (0x66), the CPU will properly
+#	However, using an operand prefix (0x66), the CPU will properly
 #	take our 48 bit far pointer. (INTeL 80386 Programmer's Reference
 #	Manual, Mixing 16-bit and 32-bit code, page 16-6)
 

arch/i386/boot/tools/build.c

@@ -1,6 +1,4 @@
 /*
- *  $Id: build.c,v 1.5 1997/05/19 12:29:58 mj Exp $
- *
  *  Copyright (C) 1991, 1992  Linus Torvalds
  *  Copyright (C) 1997 Martin Mares
  */
@@ -8,7 +6,8 @@
 /*
  * This file builds a disk-image from three different files:
  *
- * - bootsect: exactly 512 bytes of 8086 machine code, loads the rest
+ * - bootsect: compatibility mbr which prints an error message if
+ *             someone tries to boot the kernel directly.
  * - setup: 8086 machine code, sets up system parm
  * - system: 80386 code for actual system
  *

arch/i386/crypto/aes.c

@@ -59,7 +59,7 @@ struct aes_ctx {
 };
 
 #define WPOLY 0x011b
-#define u32_in(x) le32_to_cpu(*(const u32 *)(x))
+#define u32_in(x) le32_to_cpup((const __le32 *)(x))
 #define bytes2word(b0, b1, b2, b3)  \
 	(((u32)(b3) << 24) | ((u32)(b2) << 16) | ((u32)(b1) << 8) | (b0))
 

arch/i386/defconfig

@@ -126,7 +126,6 @@ CONFIG_HAVE_DEC_LOCK=y
 #
 CONFIG_PM=y
 CONFIG_SOFTWARE_SUSPEND=y
-# CONFIG_PM_DISK is not set
 
 #
 # ACPI (Advanced Configuration and Power Interface) Support

arch/i386/kernel/Makefile

@@ -24,6 +24,7 @@ obj-$(CONFIG_X86_MPPARSE)	+= mpparse.o
 obj-$(CONFIG_X86_LOCAL_APIC)	+= apic.o nmi.o
 obj-$(CONFIG_X86_IO_APIC)	+= io_apic.o
 obj-$(CONFIG_X86_REBOOTFIXUPS)	+= reboot_fixups.o
+obj-$(CONFIG_KEXEC)		+= machine_kexec.o relocate_kernel.o crash.o
 obj-$(CONFIG_X86_NUMAQ)		+= numaq.o
 obj-$(CONFIG_X86_SUMMIT_NUMA)	+= summit.o
 obj-$(CONFIG_KPROBES)		+= kprobes.o

arch/i386/kernel/acpi/boot.c

@@ -29,6 +29,7 @@
 #include <linux/efi.h>
 #include <linux/irq.h>
 #include <linux/module.h>
+#include <linux/dmi.h>
 
 #include <asm/pgtable.h>
 #include <asm/io_apic.h>
@@ -815,6 +816,219 @@ acpi_process_madt(void)
 	return;
 }
 
+extern int acpi_force;
+
+#ifdef __i386__
+
+#ifdef	CONFIG_ACPI_PCI
+static int __init disable_acpi_irq(struct dmi_system_id *d)
+{
+	if (!acpi_force) {
+		printk(KERN_NOTICE "%s detected: force use of acpi=noirq\n",
+		       d->ident);
+		acpi_noirq_set();
+	}
+	return 0;
+}
+
+static int __init disable_acpi_pci(struct dmi_system_id *d)
+{
+	if (!acpi_force) {
+		printk(KERN_NOTICE "%s detected: force use of pci=noacpi\n",
+		       d->ident);
+		acpi_disable_pci();
+	}
+	return 0;
+}
+#endif
+
+static int __init dmi_disable_acpi(struct dmi_system_id *d)
+{
+	if (!acpi_force) {
+		printk(KERN_NOTICE "%s detected: acpi off\n",d->ident);
+		disable_acpi();
+	} else {
+		printk(KERN_NOTICE
+		       "Warning: DMI blacklist says broken, but acpi forced\n");
+	}
+	return 0;
+}
+
+/*
+ * Limit ACPI to CPU enumeration for HT
+ */
+static int __init force_acpi_ht(struct dmi_system_id *d)
+{
+	if (!acpi_force) {
+		printk(KERN_NOTICE "%s detected: force use of acpi=ht\n", d->ident);
+		disable_acpi();
+		acpi_ht = 1;
+	} else {
+		printk(KERN_NOTICE
+		       "Warning: acpi=force overrules DMI blacklist: acpi=ht\n");
+	}
+	return 0;
+}
+
+/*
+ * If your system is blacklisted here, but you find that acpi=force
+ * works for you, please contact acpi-devel@sourceforge.net
+ */
+static struct dmi_system_id __initdata acpi_dmi_table[] = {
+	/*
+	 * Boxes that need ACPI disabled
+	 */
+	{
+		.callback = dmi_disable_acpi,
+		.ident = "IBM Thinkpad",
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "IBM"),
+			DMI_MATCH(DMI_BOARD_NAME, "2629H1G"),
+		},
+	},
+
+	/*
+	 * Boxes that need acpi=ht
+	 */
+	{
+		.callback = force_acpi_ht,
+		.ident = "FSC Primergy T850",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "PRIMERGY T850"),
+		},
+	},
+	{
+		.callback = force_acpi_ht,
+		.ident = "DELL GX240",
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "Dell Computer Corporation"),
+			DMI_MATCH(DMI_BOARD_NAME, "OptiPlex GX240"),
+		},
+	},
+	{
+		.callback = force_acpi_ht,
+		.ident = "HP VISUALIZE NT Workstation",
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "Hewlett-Packard"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "HP VISUALIZE NT Workstation"),
+		},
+	},
+	{
+		.callback = force_acpi_ht,
+		.ident = "Compaq Workstation W8000",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Compaq"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Workstation W8000"),
+		},
+	},
+	{
+		.callback = force_acpi_ht,
+		.ident = "ASUS P4B266",
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
+			DMI_MATCH(DMI_BOARD_NAME, "P4B266"),
+		},
+	},
+	{
+		.callback = force_acpi_ht,
+		.ident = "ASUS P2B-DS",
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
+			DMI_MATCH(DMI_BOARD_NAME, "P2B-DS"),
+		},
+	},
+	{
+		.callback = force_acpi_ht,
+		.ident = "ASUS CUR-DLS",
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
+			DMI_MATCH(DMI_BOARD_NAME, "CUR-DLS"),
+		},
+	},
+	{
+		.callback = force_acpi_ht,
+		.ident = "ABIT i440BX-W83977",
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "ABIT <http://www.abit.com>"),
+			DMI_MATCH(DMI_BOARD_NAME, "i440BX-W83977 (BP6)"),
+		},
+	},
+	{
+		.callback = force_acpi_ht,
+		.ident = "IBM Bladecenter",
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "IBM"),
+			DMI_MATCH(DMI_BOARD_NAME, "IBM eServer BladeCenter HS20"),
+		},
+	},
+	{
+		.callback = force_acpi_ht,
+		.ident = "IBM eServer xSeries 360",
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "IBM"),
+			DMI_MATCH(DMI_BOARD_NAME, "eServer xSeries 360"),
+		},
+	},
+	{
+		.callback = force_acpi_ht,
+		.ident = "IBM eserver xSeries 330",
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "IBM"),
+			DMI_MATCH(DMI_BOARD_NAME, "eserver xSeries 330"),
+		},
+	},
+	{
+		.callback = force_acpi_ht,
+		.ident = "IBM eserver xSeries 440",
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "IBM"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "eserver xSeries 440"),
+		},
+	},
+
+#ifdef	CONFIG_ACPI_PCI
+	/*
+	 * Boxes that need ACPI PCI IRQ routing disabled
+	 */
+	{
+		.callback = disable_acpi_irq,
+		.ident = "ASUS A7V",
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC"),
+			DMI_MATCH(DMI_BOARD_NAME, "<A7V>"),
+			/* newer BIOS, Revision 1011, does work */
+			DMI_MATCH(DMI_BIOS_VERSION, "ASUS A7V ACPI BIOS Revision 1007"),
+		},
+	},
+
+	/*
+	 * Boxes that need ACPI PCI IRQ routing and PCI scan disabled
+	 */
+	{	/* _BBN 0 bug */
+		.callback = disable_acpi_pci,
+		.ident = "ASUS PR-DLS",
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
+			DMI_MATCH(DMI_BOARD_NAME, "PR-DLS"),
+			DMI_MATCH(DMI_BIOS_VERSION, "ASUS PR-DLS ACPI BIOS Revision 1010"),
+			DMI_MATCH(DMI_BIOS_DATE, "03/21/2003")
+		},
+	},
+	{
+		.callback = disable_acpi_pci,
+		.ident = "Acer TravelMate 36x Laptop",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
+ 			DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 360"),
+		},
+	},
+#endif
+	{ }
+};
+
+#endif	/* __i386__ */
+
 /*
  * acpi_boot_table_init() and acpi_boot_init()
  *  called from setup_arch(), always.
@@ -843,6 +1057,10 @@ acpi_boot_table_init(void)
 {
 	int error;
 
+#ifdef __i386__
+	dmi_check_system(acpi_dmi_table);
+#endif
+
 	/*
 	 * If acpi_disabled, bail out
 	 * One exception: acpi=ht continues far enough to enumerate LAPICs
@@ -870,8 +1088,6 @@ acpi_boot_table_init(void)
 	 */
 	error = acpi_blacklisted();
 	if (error) {
-		extern int acpi_force;
-
 		if (acpi_force) {
 			printk(KERN_WARNING PREFIX "acpi=force override\n");
 		} else {

arch/i386/kernel/acpi/sleep.c

@@ -7,6 +7,7 @@
 
 #include <linux/acpi.h>
 #include <linux/bootmem.h>
+#include <linux/dmi.h>
 #include <asm/smp.h>
 #include <asm/tlbflush.h>
 
@@ -91,3 +92,29 @@ static int __init acpi_sleep_setup(char *str)
 
 
 __setup("acpi_sleep=", acpi_sleep_setup);
+
+
+static __init int reset_videomode_after_s3(struct dmi_system_id *d)
+{
+	acpi_video_flags |= 2;
+	return 0;
+}
+
+static __initdata struct dmi_system_id acpisleep_dmi_table[] = {
+	{	/* Reset video mode after returning from ACPI S3 sleep */
+		.callback = reset_videomode_after_s3,
+		.ident = "Toshiba Satellite 4030cdt",
+		.matches = {
+			DMI_MATCH(DMI_PRODUCT_NAME, "S4030CDT/4.3"),
+		},
+	},
+	{ }
+};
+
+static int __init acpisleep_dmi_init(void)
+{
+	dmi_check_system(acpisleep_dmi_table);
+	return 0;
+}
+
+core_initcall(acpisleep_dmi_init);

arch/i386/kernel/apic.c

@@ -26,6 +26,7 @@
 #include <linux/mc146818rtc.h>
 #include <linux/kernel_stat.h>
 #include <linux/sysdev.h>
+#include <linux/cpu.h>
 
 #include <asm/atomic.h>
 #include <asm/smp.h>
@@ -39,6 +40,11 @@
 
 #include "io_ports.h"
 
+/*
+ * Knob to control our willingness to enable the local APIC.
+ */
+int enable_local_apic __initdata = 0; /* -1=force-disable, +1=force-enable */
+
 /*
  * Debug level
  */
@@ -205,7 +211,7 @@ void __init connect_bsp_APIC(void)
 	enable_apic_mode();
 }
 
-void disconnect_bsp_APIC(void)
+void disconnect_bsp_APIC(int virt_wire_setup)
 {
 	if (pic_mode) {
 		/*
@@ -219,6 +225,42 @@ void disconnect_bsp_APIC(void)
 		outb(0x70, 0x22);
 		outb(0x00, 0x23);
 	}
+	else {
+		/* Go back to Virtual Wire compatibility mode */
+		unsigned long value;
+
+		/* For the spurious interrupt use vector F, and enable it */
+		value = apic_read(APIC_SPIV);
+		value &= ~APIC_VECTOR_MASK;
+		value |= APIC_SPIV_APIC_ENABLED;
+		value |= 0xf;
+		apic_write_around(APIC_SPIV, value);
+
+		if (!virt_wire_setup) {
+			/* For LVT0 make it edge triggered, active high, external and enabled */
+			value = apic_read(APIC_LVT0);
+			value &= ~(APIC_MODE_MASK | APIC_SEND_PENDING |
+				APIC_INPUT_POLARITY | APIC_LVT_REMOTE_IRR |
+				APIC_LVT_LEVEL_TRIGGER | APIC_LVT_MASKED );
+			value |= APIC_LVT_REMOTE_IRR | APIC_SEND_PENDING;
+			value = SET_APIC_DELIVERY_MODE(value, APIC_MODE_EXTINT);
+			apic_write_around(APIC_LVT0, value);
+		}
+		else {
+			/* Disable LVT0 */
+			apic_write_around(APIC_LVT0, APIC_LVT_MASKED);
+		}
+
+		/* For LVT1 make it edge triggered, active high, nmi and enabled */
+		value = apic_read(APIC_LVT1);
+		value &= ~(
+			APIC_MODE_MASK | APIC_SEND_PENDING |
+			APIC_INPUT_POLARITY | APIC_LVT_REMOTE_IRR |
+			APIC_LVT_LEVEL_TRIGGER | APIC_LVT_MASKED);
+		value |= APIC_LVT_REMOTE_IRR | APIC_SEND_PENDING;
+		value = SET_APIC_DELIVERY_MODE(value, APIC_MODE_NMI);
+		apic_write_around(APIC_LVT1, value);
+	}
 }
 
 void disable_local_APIC(void)
@@ -363,7 +405,7 @@ void __init init_bsp_APIC(void)
 	apic_write_around(APIC_LVT1, value);
 }
 
-void __init setup_local_APIC (void)
+void __devinit setup_local_APIC(void)
 {
 	unsigned long oldvalue, value, ver, maxlvt;
 
@@ -634,7 +676,7 @@ static struct sys_device device_lapic = {
 	.cls	= &lapic_sysclass,
 };
 
-static void __init apic_pm_activate(void)
+static void __devinit apic_pm_activate(void)
 {
 	apic_pm_state.active = 1;
 }
@@ -665,26 +707,6 @@ static void apic_pm_activate(void) { }
  * Original code written by Keir Fraser.
  */
 
-/*
- * Knob to control our willingness to enable the local APIC.
- */
-int enable_local_apic __initdata = 0; /* -1=force-disable, +1=force-enable */
-
-static int __init lapic_disable(char *str)
-{
-	enable_local_apic = -1;
-	clear_bit(X86_FEATURE_APIC, boot_cpu_data.x86_capability);
-	return 0;
-}
-__setup("nolapic", lapic_disable);
-
-static int __init lapic_enable(char *str)
-{
-	enable_local_apic = 1;
-	return 0;
-}
-__setup("lapic", lapic_enable);
-
 static int __init apic_set_verbosity(char *str)
 {
 	if (strcmp("debug", str) == 0)
@@ -855,7 +877,7 @@ fake_ioapic_page:
  * but we do not accept timer interrupts yet. We only allow the BP
  * to calibrate.
  */
-static unsigned int __init get_8254_timer_count(void)
+static unsigned int __devinit get_8254_timer_count(void)
 {
 	extern spinlock_t i8253_lock;
 	unsigned long flags;
@@ -874,7 +896,7 @@ static unsigned int __init get_8254_timer_count(void)
 }
 
 /* next tick in 8254 can be caught by catching timer wraparound */
-static void __init wait_8254_wraparound(void)
+static void __devinit wait_8254_wraparound(void)
 {
 	unsigned int curr_count, prev_count;
 
@@ -894,7 +916,7 @@ static void __init wait_8254_wraparound(void)
  * Default initialization for 8254 timers. If we use other timers like HPET,
  * we override this later
  */
-void (*wait_timer_tick)(void) __initdata = wait_8254_wraparound;
+void (*wait_timer_tick)(void) __devinitdata = wait_8254_wraparound;
 
 /*
  * This function sets up the local APIC timer, with a timeout of
@@ -930,7 +952,7 @@ static void __setup_APIC_LVTT(unsigned int clocks)
 	apic_write_around(APIC_TMICT, clocks/APIC_DIVISOR);
 }
 
-static void __init setup_APIC_timer(unsigned int clocks)
+static void __devinit setup_APIC_timer(unsigned int clocks)
 {
 	unsigned long flags;
 
@@ -1043,12 +1065,12 @@ void __init setup_boot_APIC_clock(void)
 	local_irq_enable();
 }
 
-void __init setup_secondary_APIC_clock(void)
+void __devinit setup_secondary_APIC_clock(void)
 {
 	setup_APIC_timer(calibration_result);
 }
 
-void __init disable_APIC_timer(void)
+void __devinit disable_APIC_timer(void)
 {
 	if (using_apic_timer) {
 		unsigned long v;

arch/i386/kernel/apm.c

@@ -346,10 +346,10 @@ extern int (*console_blank_hook)(int);
 struct apm_user {
 	int		magic;
 	struct apm_user *	next;
-	int		suser: 1;
-	int		writer: 1;
-	int		reader: 1;
-	int		suspend_wait: 1;
+	unsigned int	suser: 1;
+	unsigned int	writer: 1;
+	unsigned int	reader: 1;
+	unsigned int	suspend_wait: 1;
 	int		suspend_result;
 	int		suspends_pending;
 	int		standbys_pending;

arch/i386/kernel/cpu/common.c

@@ -24,9 +24,9 @@ EXPORT_PER_CPU_SYMBOL(cpu_gdt_table);
 DEFINE_PER_CPU(unsigned char, cpu_16bit_stack[CPU_16BIT_STACK_SIZE]);
 EXPORT_PER_CPU_SYMBOL(cpu_16bit_stack);
 
-static int cachesize_override __initdata = -1;
-static int disable_x86_fxsr __initdata = 0;
-static int disable_x86_serial_nr __initdata = 1;
+static int cachesize_override __devinitdata = -1;
+static int disable_x86_fxsr __devinitdata = 0;
+static int disable_x86_serial_nr __devinitdata = 1;
 
 struct cpu_dev * cpu_devs[X86_VENDOR_NUM] = {};
 
@@ -59,7 +59,7 @@ static int __init cachesize_setup(char *str)
 }
 __setup("cachesize=", cachesize_setup);
 
-int __init get_model_name(struct cpuinfo_x86 *c)
+int __devinit get_model_name(struct cpuinfo_x86 *c)
 {
 	unsigned int *v;
 	char *p, *q;
@@ -89,7 +89,7 @@ int __init get_model_name(struct cpuinfo_x86 *c)
 }
 
 
-void __init display_cacheinfo(struct cpuinfo_x86 *c)
+void __devinit display_cacheinfo(struct cpuinfo_x86 *c)
 {
 	unsigned int n, dummy, ecx, edx, l2size;
 
@@ -130,7 +130,7 @@ void __init display_cacheinfo(struct cpuinfo_x86 *c)
 /* in particular, if CPUID levels 0x80000002..4 are supported, this isn't used */
 
 /* Look up CPU names by table lookup. */
-static char __init *table_lookup_model(struct cpuinfo_x86 *c)
+static char __devinit *table_lookup_model(struct cpuinfo_x86 *c)
 {
 	struct cpu_model_info *info;
 
@@ -151,7 +151,7 @@ static char __init *table_lookup_model(struct cpuinfo_x86 *c)
 }
 
 
-void __init get_cpu_vendor(struct cpuinfo_x86 *c, int early)
+void __devinit get_cpu_vendor(struct cpuinfo_x86 *c, int early)
 {
 	char *v = c->x86_vendor_id;
 	int i;
@@ -202,7 +202,7 @@ static inline int flag_is_changeable_p(u32 flag)
 
 
 /* Probe for the CPUID instruction */
-static int __init have_cpuid_p(void)
+static int __devinit have_cpuid_p(void)
 {
 	return flag_is_changeable_p(X86_EFLAGS_ID);
 }
@@ -249,7 +249,7 @@ static void __init early_cpu_detect(void)
 #endif
 }
 
-void __init generic_identify(struct cpuinfo_x86 * c)
+void __devinit generic_identify(struct cpuinfo_x86 * c)
 {
 	u32 tfms, xlvl;
 	int junk;
@@ -296,7 +296,7 @@ void __init generic_identify(struct cpuinfo_x86 * c)
 	}
 }
 
-static void __init squash_the_stupid_serial_number(struct cpuinfo_x86 *c)
+static void __devinit squash_the_stupid_serial_number(struct cpuinfo_x86 *c)
 {
 	if (cpu_has(c, X86_FEATURE_PN) && disable_x86_serial_nr ) {
 		/* Disable processor serial number */
@@ -324,7 +324,7 @@ __setup("serialnumber", x86_serial_nr_setup);
 /*
  * This does the hard work of actually picking apart the CPU stuff...
  */
-void __init identify_cpu(struct cpuinfo_x86 *c)
+void __devinit identify_cpu(struct cpuinfo_x86 *c)
 {
 	int i;
 
@@ -432,10 +432,13 @@ void __init identify_cpu(struct cpuinfo_x86 *c)
 #ifdef CONFIG_X86_MCE
 	mcheck_init(c);
 #endif
+	if (c == &boot_cpu_data)
+		sysenter_setup();
+	enable_sep_cpu();
 }
 
 #ifdef CONFIG_X86_HT
-void __init detect_ht(struct cpuinfo_x86 *c)
+void __devinit detect_ht(struct cpuinfo_x86 *c)
 {
 	u32 	eax, ebx, ecx, edx;
 	int 	index_msb, tmp;
@@ -490,7 +493,7 @@ void __init detect_ht(struct cpuinfo_x86 *c)
 }
 #endif
 
-void __init print_cpu_info(struct cpuinfo_x86 *c)
+void __devinit print_cpu_info(struct cpuinfo_x86 *c)
 {
 	char *vendor = NULL;
 
@@ -513,7 +516,7 @@ void __init print_cpu_info(struct cpuinfo_x86 *c)
 		printk("\n");
 }
 
-cpumask_t cpu_initialized __initdata = CPU_MASK_NONE;
+cpumask_t cpu_initialized __devinitdata = CPU_MASK_NONE;
 
 /* This is hacky. :)
  * We're emulating future behavior.
@@ -560,7 +563,7 @@ void __init early_cpu_init(void)
  * and IDT. We reload them nevertheless, this function acts as a
  * 'CPU state barrier', nothing should get across.
  */
-void __init cpu_init (void)
+void __devinit cpu_init(void)
 {
 	int cpu = smp_processor_id();
 	struct tss_struct * t = &per_cpu(init_tss, cpu);
@@ -648,3 +651,15 @@ void __init cpu_init (void)
 	clear_used_math();
 	mxcsr_feature_mask_init();
 }
+
+#ifdef CONFIG_HOTPLUG_CPU
+void __devinit cpu_uninit(void)
+{
+	int cpu = raw_smp_processor_id();
+	cpu_clear(cpu, cpu_initialized);
+
+	/* lazy TLB state */
+	per_cpu(cpu_tlbstate, cpu).state = 0;
+	per_cpu(cpu_tlbstate, cpu).active_mm = &init_mm;
+}
+#endif

arch/i386/kernel/cpu/cpufreq/powernow-k7.c

@@ -648,9 +648,7 @@ static int powernow_cpu_exit (struct cpufreq_policy *policy) {
 	}
 #endif
 
-	if (powernow_table)
-		kfree(powernow_table);
-
+	kfree(powernow_table);
 	return 0;
 }
 

arch/i386/kernel/cpu/intel.c

@@ -28,7 +28,7 @@ extern int trap_init_f00f_bug(void);
 struct movsl_mask movsl_mask;
 #endif
 
-void __init early_intel_workaround(struct cpuinfo_x86 *c)
+void __devinit early_intel_workaround(struct cpuinfo_x86 *c)
 {
 	if (c->x86_vendor != X86_VENDOR_INTEL)
 		return;
@@ -43,7 +43,7 @@ void __init early_intel_workaround(struct cpuinfo_x86 *c)
  *	This is called before we do cpu ident work
  */
  
-int __init ppro_with_ram_bug(void)
+int __devinit ppro_with_ram_bug(void)
 {
 	/* Uses data from early_cpu_detect now */
 	if (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL &&
@@ -61,7 +61,7 @@ int __init ppro_with_ram_bug(void)
  * P4 Xeon errata 037 workaround.
  * Hardware prefetcher may cause stale data to be loaded into the cache.
  */
-static void __init Intel_errata_workarounds(struct cpuinfo_x86 *c)
+static void __devinit Intel_errata_workarounds(struct cpuinfo_x86 *c)
 {
 	unsigned long lo, hi;
 
@@ -80,7 +80,7 @@ static void __init Intel_errata_workarounds(struct cpuinfo_x86 *c)
 /*
  * find out the number of processor cores on the die
  */
-static int __init num_cpu_cores(struct cpuinfo_x86 *c)
+static int __devinit num_cpu_cores(struct cpuinfo_x86 *c)
 {
 	unsigned int eax;
 
@@ -98,7 +98,7 @@ static int __init num_cpu_cores(struct cpuinfo_x86 *c)
 		return 1;
 }
 
-static void __init init_intel(struct cpuinfo_x86 *c)
+static void __devinit init_intel(struct cpuinfo_x86 *c)
 {
 	unsigned int l2 = 0;
 	char *p = NULL;
@@ -204,7 +204,7 @@ static unsigned int intel_size_cache(struct cpuinfo_x86 * c, unsigned int size)
 	return size;
 }
 
-static struct cpu_dev intel_cpu_dev __initdata = {
+static struct cpu_dev intel_cpu_dev __devinitdata = {
 	.c_vendor	= "Intel",
 	.c_ident 	= { "GenuineIntel" },
 	.c_models = {

arch/i386/kernel/cpu/intel_cacheinfo.c

@@ -28,7 +28,7 @@ struct _cache_table
 };
 
 /* all the cache descriptor types we care about (no TLB or trace cache entries) */
-static struct _cache_table cache_table[] __initdata =
+static struct _cache_table cache_table[] __devinitdata =
 {
 	{ 0x06, LVL_1_INST, 8 },	/* 4-way set assoc, 32 byte line size */
 	{ 0x08, LVL_1_INST, 16 },	/* 4-way set assoc, 32 byte line size */
@@ -160,7 +160,7 @@ static int __init find_num_cache_leaves(void)
 	return retval;
 }
 
-unsigned int __init init_intel_cacheinfo(struct cpuinfo_x86 *c)
+unsigned int __devinit init_intel_cacheinfo(struct cpuinfo_x86 *c)
 {
 	unsigned int trace = 0, l1i = 0, l1d = 0, l2 = 0, l3 = 0; /* Cache sizes */
 	unsigned int new_l1d = 0, new_l1i = 0; /* Cache sizes from cpuid(4) */

arch/i386/kernel/cpu/mcheck/k7.c

@@ -69,7 +69,7 @@ static fastcall void k7_machine_check(struct pt_regs * regs, long error_code)
 
 
 /* AMD K7 machine check is Intel like */
-void __init amd_mcheck_init(struct cpuinfo_x86 *c)
+void __devinit amd_mcheck_init(struct cpuinfo_x86 *c)
 {
 	u32 l, h;
 	int i;

arch/i386/kernel/cpu/mcheck/mce.c

@@ -16,7 +16,7 @@
 
 #include "mce.h"
 
-int mce_disabled __initdata = 0;
+int mce_disabled __devinitdata = 0;
 int nr_mce_banks;
 
 EXPORT_SYMBOL_GPL(nr_mce_banks);	/* non-fatal.o */
@@ -31,7 +31,7 @@ static fastcall void unexpected_machine_check(struct pt_regs * regs, long error_
 void fastcall (*machine_check_vector)(struct pt_regs *, long error_code) = unexpected_machine_check;
 
 /* This has to be run for each processor */
-void __init mcheck_init(struct cpuinfo_x86 *c)
+void __devinit mcheck_init(struct cpuinfo_x86 *c)
 {
 	if (mce_disabled==1)
 		return;

arch/i386/kernel/cpu/mcheck/p4.c

@@ -78,7 +78,7 @@ fastcall void smp_thermal_interrupt(struct pt_regs *regs)
 }
 
 /* P4/Xeon Thermal regulation detect and init */
-static void __init intel_init_thermal(struct cpuinfo_x86 *c)
+static void __devinit intel_init_thermal(struct cpuinfo_x86 *c)
 {
 	u32 l, h;
 	unsigned int cpu = smp_processor_id();
@@ -232,7 +232,7 @@ static fastcall void intel_machine_check(struct pt_regs * regs, long error_code)
 }
 
 
-void __init intel_p4_mcheck_init(struct cpuinfo_x86 *c)
+void __devinit intel_p4_mcheck_init(struct cpuinfo_x86 *c)
 {
 	u32 l, h;
 	int i;

arch/i386/kernel/cpu/mcheck/p5.c

@@ -29,7 +29,7 @@ static fastcall void pentium_machine_check(struct pt_regs * regs, long error_cod
 }
 
 /* Set up machine check reporting for processors with Intel style MCE */
-void __init intel_p5_mcheck_init(struct cpuinfo_x86 *c)
+void __devinit intel_p5_mcheck_init(struct cpuinfo_x86 *c)
 {
 	u32 l, h;
 	

arch/i386/kernel/cpu/mcheck/p6.c

@@ -80,7 +80,7 @@ static fastcall void intel_machine_check(struct pt_regs * regs, long error_code)
 }
 
 /* Set up machine check reporting for processors with Intel style MCE */
-void __init intel_p6_mcheck_init(struct cpuinfo_x86 *c)
+void __devinit intel_p6_mcheck_init(struct cpuinfo_x86 *c)
 {
 	u32 l, h;
 	int i;

arch/i386/kernel/cpu/mcheck/winchip.c

@@ -23,7 +23,7 @@ static fastcall void winchip_machine_check(struct pt_regs * regs, long error_cod
 }
 
 /* Set up machine check reporting on the Winchip C6 series */
-void __init winchip_mcheck_init(struct cpuinfo_x86 *c)
+void __devinit winchip_mcheck_init(struct cpuinfo_x86 *c)
 {
 	u32 lo, hi;
 	machine_check_vector = winchip_machine_check;

arch/i386/kernel/cpu/mtrr/generic.c

@@ -70,8 +70,7 @@ void __init get_mtrr_state(void)
 /*  Free resources associated with a struct mtrr_state  */
 void __init finalize_mtrr_state(void)
 {
-	if (mtrr_state.var_ranges)
-		kfree(mtrr_state.var_ranges);
+	kfree(mtrr_state.var_ranges);
 	mtrr_state.var_ranges = NULL;
 }
 

arch/i386/kernel/crash.c

@@ -0,0 +1,223 @@
+/*
+ * Architecture specific (i386) functions for kexec based crash dumps.
+ *
+ * Created by: Hariprasad Nellitheertha (hari@in.ibm.com)
+ *
+ * Copyright (C) IBM Corporation, 2004. All rights reserved.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/smp.h>
+#include <linux/irq.h>
+#include <linux/reboot.h>
+#include <linux/kexec.h>
+#include <linux/irq.h>
+#include <linux/delay.h>
+#include <linux/elf.h>
+#include <linux/elfcore.h>
+
+#include <asm/processor.h>
+#include <asm/hardirq.h>
+#include <asm/nmi.h>
+#include <asm/hw_irq.h>
+#include <asm/apic.h>
+#include <mach_ipi.h>
+
+
+note_buf_t crash_notes[NR_CPUS];
+/* This keeps a track of which one is crashing cpu. */
+static int crashing_cpu;
+
+static u32 *append_elf_note(u32 *buf, char *name, unsigned type, void *data,
+							       size_t data_len)
+{
+	struct elf_note note;
+
+	note.n_namesz = strlen(name) + 1;
+	note.n_descsz = data_len;
+	note.n_type   = type;
+	memcpy(buf, &note, sizeof(note));
+	buf += (sizeof(note) +3)/4;
+	memcpy(buf, name, note.n_namesz);
+	buf += (note.n_namesz + 3)/4;
+	memcpy(buf, data, note.n_descsz);
+	buf += (note.n_descsz + 3)/4;
+
+	return buf;
+}
+
+static void final_note(u32 *buf)
+{
+	struct elf_note note;
+
+	note.n_namesz = 0;
+	note.n_descsz = 0;
+	note.n_type   = 0;
+	memcpy(buf, &note, sizeof(note));
+}
+
+static void crash_save_this_cpu(struct pt_regs *regs, int cpu)
+{
+	struct elf_prstatus prstatus;
+	u32 *buf;
+
+	if ((cpu < 0) || (cpu >= NR_CPUS))
+		return;
+
+	/* Using ELF notes here is opportunistic.
+	 * I need a well defined structure format
+	 * for the data I pass, and I need tags
+	 * on the data to indicate what information I have
+	 * squirrelled away.  ELF notes happen to provide
+	 * all of that that no need to invent something new.
+	 */
+	buf = &crash_notes[cpu][0];
+	memset(&prstatus, 0, sizeof(prstatus));
+	prstatus.pr_pid = current->pid;
+	elf_core_copy_regs(&prstatus.pr_reg, regs);
+	buf = append_elf_note(buf, "CORE", NT_PRSTATUS, &prstatus,
+				sizeof(prstatus));
+	final_note(buf);
+}
+
+static void crash_get_current_regs(struct pt_regs *regs)
+{
+	__asm__ __volatile__("movl %%ebx,%0" : "=m"(regs->ebx));
+	__asm__ __volatile__("movl %%ecx,%0" : "=m"(regs->ecx));
+	__asm__ __volatile__("movl %%edx,%0" : "=m"(regs->edx));
+	__asm__ __volatile__("movl %%esi,%0" : "=m"(regs->esi));
+	__asm__ __volatile__("movl %%edi,%0" : "=m"(regs->edi));
+	__asm__ __volatile__("movl %%ebp,%0" : "=m"(regs->ebp));
+	__asm__ __volatile__("movl %%eax,%0" : "=m"(regs->eax));
+	__asm__ __volatile__("movl %%esp,%0" : "=m"(regs->esp));
+	__asm__ __volatile__("movw %%ss, %%ax;" :"=a"(regs->xss));
+	__asm__ __volatile__("movw %%cs, %%ax;" :"=a"(regs->xcs));
+	__asm__ __volatile__("movw %%ds, %%ax;" :"=a"(regs->xds));
+	__asm__ __volatile__("movw %%es, %%ax;" :"=a"(regs->xes));
+	__asm__ __volatile__("pushfl; popl %0" :"=m"(regs->eflags));
+
+	regs->eip = (unsigned long)current_text_addr();
+}
+
+/* CPU does not save ss and esp on stack if execution is already
+ * running in kernel mode at the time of NMI occurrence. This code
+ * fixes it.
+ */
+static void crash_setup_regs(struct pt_regs *newregs, struct pt_regs *oldregs)
+{
+	memcpy(newregs, oldregs, sizeof(*newregs));
+	newregs->esp = (unsigned long)&(oldregs->esp);
+	__asm__ __volatile__("xorl %eax, %eax;");
+	__asm__ __volatile__ ("movw %%ss, %%ax;" :"=a"(newregs->xss));
+}
+
+/* We may have saved_regs from where the error came from
+ * or it is NULL if via a direct panic().
+ */
+static void crash_save_self(struct pt_regs *saved_regs)
+{
+	struct pt_regs regs;
+	int cpu;
+
+	cpu = smp_processor_id();
+	if (saved_regs)
+		crash_setup_regs(&regs, saved_regs);
+	else
+		crash_get_current_regs(&regs);
+	crash_save_this_cpu(&regs, cpu);
+}
+
+#ifdef CONFIG_SMP
+static atomic_t waiting_for_crash_ipi;
+
+static int crash_nmi_callback(struct pt_regs *regs, int cpu)
+{
+	struct pt_regs fixed_regs;
+
+	/* Don't do anything if this handler is invoked on crashing cpu.
+	 * Otherwise, system will completely hang. Crashing cpu can get
+	 * an NMI if system was initially booted with nmi_watchdog parameter.
+	 */
+	if (cpu == crashing_cpu)
+		return 1;
+	local_irq_disable();
+
+	if (!user_mode(regs)) {
+		crash_setup_regs(&fixed_regs, regs);
+		regs = &fixed_regs;
+	}
+	crash_save_this_cpu(regs, cpu);
+	disable_local_APIC();
+	atomic_dec(&waiting_for_crash_ipi);
+	/* Assume hlt works */
+	__asm__("hlt");
+	for(;;);
+
+	return 1;
+}
+
+/*
+ * By using the NMI code instead of a vector we just sneak thru the
+ * word generator coming out with just what we want.  AND it does
+ * not matter if clustered_apic_mode is set or not.
+ */
+static void smp_send_nmi_allbutself(void)
+{
+	send_IPI_allbutself(APIC_DM_NMI);
+}
+
+static void nmi_shootdown_cpus(void)
+{
+	unsigned long msecs;
+
+	atomic_set(&waiting_for_crash_ipi, num_online_cpus() - 1);
+	/* Would it be better to replace the trap vector here? */
+	set_nmi_callback(crash_nmi_callback);
+	/* Ensure the new callback function is set before sending
+	 * out the NMI
+	 */
+	wmb();
+
+	smp_send_nmi_allbutself();
+
+	msecs = 1000; /* Wait at most a second for the other cpus to stop */
+	while ((atomic_read(&waiting_for_crash_ipi) > 0) && msecs) {
+		mdelay(1);
+		msecs--;
+	}
+
+	/* Leave the nmi callback set */
+	disable_local_APIC();
+}
+#else
+static void nmi_shootdown_cpus(void)
+{
+	/* There are no cpus to shootdown */
+}
+#endif
+
+void machine_crash_shutdown(struct pt_regs *regs)
+{
+	/* This function is only called after the system
+	 * has paniced or is otherwise in a critical state.
+	 * The minimum amount of code to allow a kexec'd kernel
+	 * to run successfully needs to happen here.
+	 *
+	 * In practice this means shooting down the other cpus in
+	 * an SMP system.
+	 */
+	/* The kernel is broken so disable interrupts */
+	local_irq_disable();
+
+	/* Make a note of crashing cpu. Will be used in NMI callback.*/
+	crashing_cpu = smp_processor_id();
+	nmi_shootdown_cpus();
+	lapic_shutdown();
+#if defined(CONFIG_X86_IO_APIC)
+	disable_IO_APIC();
+#endif
+	crash_save_self(regs);
+}

arch/i386/kernel/dmi_scan.c

@@ -1,22 +1,15 @@
 #include <linux/types.h>
-#include <linux/kernel.h>
 #include <linux/string.h>
 #include <linux/init.h>
 #include <linux/module.h>
-#include <linux/slab.h>
-#include <linux/acpi.h>
-#include <asm/io.h>
-#include <linux/pm.h>
-#include <asm/system.h>
 #include <linux/dmi.h>
 #include <linux/bootmem.h>
 
 
-struct dmi_header
-{
-	u8	type;
-	u8	length;
-	u16	handle;
+struct dmi_header {
+	u8 type;
+	u8 length;
+	u16 handle;
 };
 
 #undef DMI_DEBUG
@@ -29,15 +22,13 @@ struct dmi_header
 
 static char * __init dmi_string(struct dmi_header *dm, u8 s)
 {
-	u8 *bp=(u8 *)dm;
-	bp+=dm->length;
-	if(!s)
+	u8 *bp = ((u8 *) dm) + dm->length;
+
+	if (!s)
 		return "";
 	s--;
-	while(s>0 && *bp)
-	{
-		bp+=strlen(bp);
-		bp++;
+	while (s > 0 && *bp) {
+		bp += strlen(bp) + 1;
 		s--;
 	}
 	return bp;
@@ -47,16 +38,14 @@ static char * __init dmi_string(struct dmi_header *dm, u8 s)
  *	We have to be cautious here. We have seen BIOSes with DMI pointers
  *	pointing to completely the wrong place for example
  */
- 
-static int __init dmi_table(u32 base, int len, int num, void (*decode)(struct dmi_header *))
+static int __init dmi_table(u32 base, int len, int num,
+			    void (*decode)(struct dmi_header *))
 {
-	u8 *buf;
-	struct dmi_header *dm;
-	u8 *data;
-	int i=0;
+	u8 *buf, *data;
+	int i = 0;
 		
 	buf = bt_ioremap(base, len);
-	if(buf==NULL)
+	if (buf == NULL)
 		return -1;
 
 	data = buf;
@@ -65,36 +54,34 @@ static int __init dmi_table(u32 base, int len, int num, void (*decode)(struct dm
  	 *	Stop when we see all the items the table claimed to have
  	 *	OR we run off the end of the table (also happens)
  	 */
- 
-	while(i<num && data-buf+sizeof(struct dmi_header)<=len)
-	{
-		dm=(struct dmi_header *)data;
+	while ((i < num) && (data - buf + sizeof(struct dmi_header)) <= len) {
+		struct dmi_header *dm = (struct dmi_header *)data;
 		/*
 		 *  We want to know the total length (formated area and strings)
 		 *  before decoding to make sure we won't run off the table in
 		 *  dmi_decode or dmi_string
 		 */
-		data+=dm->length;
-		while(data-buf<len-1 && (data[0] || data[1]))
+		data += dm->length;
+		while ((data - buf < len - 1) && (data[0] || data[1]))
 			data++;
-		if(data-buf<len-1)
+		if (data - buf < len - 1)
 			decode(dm);
-		data+=2;
+		data += 2;
 		i++;
 	}
 	bt_iounmap(buf, len);
 	return 0;
 }
 
-
-inline static int __init dmi_checksum(u8 *buf)
+static int __init dmi_checksum(u8 *buf)
 {
-	u8 sum=0;
+	u8 sum = 0;
 	int a;
 	
-	for(a=0; a<15; a++)
-		sum+=buf[a];
-	return (sum==0);
+	for (a = 0; a < 15; a++)
+		sum += buf[a];
+
+	return sum == 0;
 }
 
 static int __init dmi_iterate(void (*decode)(struct dmi_header *))
@@ -110,28 +97,30 @@ static int __init dmi_iterate(void (*decode)(struct dmi_header *))
 	p = ioremap(0xF0000, 0x10000);
 	if (p == NULL)
 		return -1;
+
 	for (q = p; q < p + 0x10000; q += 16) {
 		memcpy_fromio(buf, q, 15);
-		if(memcmp(buf, "_DMI_", 5)==0 && dmi_checksum(buf))
-		{
-			u16 num=buf[13]<<8|buf[12];
-			u16 len=buf[7]<<8|buf[6];
-			u32 base=buf[11]<<24|buf[10]<<16|buf[9]<<8|buf[8];
+		if ((memcmp(buf, "_DMI_", 5) == 0) && dmi_checksum(buf)) {
+			u16 num = (buf[13] << 8) | buf[12];
+			u16 len = (buf[7] << 8) | buf[6];
+			u32 base = (buf[11] << 24) | (buf[10] << 16) |
+				   (buf[9] << 8) | buf[8];
 
 			/*
 			 * DMI version 0.0 means that the real version is taken from
 			 * the SMBIOS version, which we don't know at this point.
 			 */
-			if(buf[14]!=0)
+			if (buf[14] != 0)
 				printk(KERN_INFO "DMI %d.%d present.\n",
-					buf[14]>>4, buf[14]&0x0F);
+					buf[14] >> 4, buf[14] & 0xF);
 			else
 				printk(KERN_INFO "DMI present.\n");
+
 			dmi_printk((KERN_INFO "%d structures occupying %d bytes.\n",
 				num, len));
-			dmi_printk((KERN_INFO "DMI table at 0x%08X.\n",
-				base));
-			if(dmi_table(base,len, num, decode)==0)
+			dmi_printk((KERN_INFO "DMI table at 0x%08X.\n", base));
+
+			if (dmi_table(base,len, num, decode) == 0)
 				return 0;
 		}
 	}
@@ -143,298 +132,65 @@ static char *dmi_ident[DMI_STRING_MAX];
 /*
  *	Save a DMI string
  */
- 
 static void __init dmi_save_ident(struct dmi_header *dm, int slot, int string)
 {
 	char *d = (char*)dm;
 	char *p = dmi_string(dm, d[string]);
-	if(p==NULL || *p == 0)
+
+	if (p == NULL || *p == 0)
 		return;
 	if (dmi_ident[slot])
 		return;
-	dmi_ident[slot] = alloc_bootmem(strlen(p)+1);
+
+	dmi_ident[slot] = alloc_bootmem(strlen(p) + 1);
 	if(dmi_ident[slot])
 		strcpy(dmi_ident[slot], p);
 	else
 		printk(KERN_ERR "dmi_save_ident: out of memory.\n");
 }
 
-/*
- * Ugly compatibility crap.
- */
-#define dmi_blacklist	dmi_system_id
-#define NO_MATCH	{ DMI_NONE, NULL}
-#define MATCH		DMI_MATCH
-
-/*
- * Toshiba keyboard likes to repeat keys when they are not repeated.
- */
-
-static __init int broken_toshiba_keyboard(struct dmi_blacklist *d)
-{
-	printk(KERN_WARNING "Toshiba with broken keyboard detected. If your keyboard sometimes generates 3 keypresses instead of one, see http://davyd.ucc.asn.au/projects/toshiba/README\n");
-	return 0;
-}
-
-
-#ifdef CONFIG_ACPI_SLEEP
-static __init int reset_videomode_after_s3(struct dmi_blacklist *d)
-{
-	/* See acpi_wakeup.S */
-	extern long acpi_video_flags;
-	acpi_video_flags |= 2;
-	return 0;
-}
-#endif
-
-
-#ifdef	CONFIG_ACPI_BOOT
-extern int acpi_force;
-
-static __init __attribute__((unused)) int dmi_disable_acpi(struct dmi_blacklist *d) 
-{ 
-	if (!acpi_force) { 
-		printk(KERN_NOTICE "%s detected: acpi off\n",d->ident); 
-		disable_acpi();
-	} else { 
-		printk(KERN_NOTICE 
-		       "Warning: DMI blacklist says broken, but acpi forced\n"); 
-	}
-	return 0;
-} 
-
-/*
- * Limit ACPI to CPU enumeration for HT
- */
-static __init __attribute__((unused)) int force_acpi_ht(struct dmi_blacklist *d) 
-{ 
-	if (!acpi_force) { 
-		printk(KERN_NOTICE "%s detected: force use of acpi=ht\n", d->ident); 
-		disable_acpi();
-		acpi_ht = 1; 
-	} else { 
-		printk(KERN_NOTICE 
-		       "Warning: acpi=force overrules DMI blacklist: acpi=ht\n"); 
-	}
-	return 0;
-} 
-#endif
-
-#ifdef	CONFIG_ACPI_PCI
-static __init int disable_acpi_irq(struct dmi_blacklist *d) 
-{
-	if (!acpi_force) {
-		printk(KERN_NOTICE "%s detected: force use of acpi=noirq\n",
-		       d->ident); 	
-		acpi_noirq_set();
-	}
-	return 0;
-}
-static __init int disable_acpi_pci(struct dmi_blacklist *d) 
-{
-	if (!acpi_force) {
-		printk(KERN_NOTICE "%s detected: force use of pci=noacpi\n",
-		       d->ident); 	
-		acpi_disable_pci();
-	}
-	return 0;
-}  
-#endif
-
-/*
- *	Process the DMI blacklists
- */
- 
-
-/*
- *	This will be expanded over time to force things like the APM 
- *	interrupt mask settings according to the laptop
- */
- 
-static __initdata struct dmi_blacklist dmi_blacklist[]={
-
-	{ broken_toshiba_keyboard, "Toshiba Satellite 4030cdt", { /* Keyboard generates spurious repeats */
-			MATCH(DMI_PRODUCT_NAME, "S4030CDT/4.3"),
-			NO_MATCH, NO_MATCH, NO_MATCH
-			} },
-#ifdef CONFIG_ACPI_SLEEP
-	{ reset_videomode_after_s3, "Toshiba Satellite 4030cdt", { /* Reset video mode after returning from ACPI S3 sleep */
-			MATCH(DMI_PRODUCT_NAME, "S4030CDT/4.3"),
-			NO_MATCH, NO_MATCH, NO_MATCH
-			} },
-#endif
-
-#ifdef	CONFIG_ACPI_BOOT
-	/*
-	 * If your system is blacklisted here, but you find that acpi=force
-	 * works for you, please contact acpi-devel@sourceforge.net
-	 */
-
-	/*
-	 *	Boxes that need ACPI disabled
-	 */
-
-	{ dmi_disable_acpi, "IBM Thinkpad", {
-			MATCH(DMI_BOARD_VENDOR, "IBM"),
-			MATCH(DMI_BOARD_NAME, "2629H1G"),
-			NO_MATCH, NO_MATCH }},
-
-	/*
-	 *	Boxes that need acpi=ht 
-	 */
-
-	{ force_acpi_ht, "FSC Primergy T850", {
-			MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"),
-			MATCH(DMI_PRODUCT_NAME, "PRIMERGY T850"),
-			NO_MATCH, NO_MATCH }},
-
-	{ force_acpi_ht, "DELL GX240", {
-			MATCH(DMI_BOARD_VENDOR, "Dell Computer Corporation"),
-			MATCH(DMI_BOARD_NAME, "OptiPlex GX240"),
-			NO_MATCH, NO_MATCH }},
-
-	{ force_acpi_ht, "HP VISUALIZE NT Workstation", {
-			MATCH(DMI_BOARD_VENDOR, "Hewlett-Packard"),
-			MATCH(DMI_PRODUCT_NAME, "HP VISUALIZE NT Workstation"),
-			NO_MATCH, NO_MATCH }},
-
-	{ force_acpi_ht, "Compaq Workstation W8000", {
-			MATCH(DMI_SYS_VENDOR, "Compaq"),
-			MATCH(DMI_PRODUCT_NAME, "Workstation W8000"),
-			NO_MATCH, NO_MATCH }},
-
-	{ force_acpi_ht, "ASUS P4B266", {
-			MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
-			MATCH(DMI_BOARD_NAME, "P4B266"),
-			NO_MATCH, NO_MATCH }},
-
-	{ force_acpi_ht, "ASUS P2B-DS", {
-			MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
-			MATCH(DMI_BOARD_NAME, "P2B-DS"),
-			NO_MATCH, NO_MATCH }},
-
-	{ force_acpi_ht, "ASUS CUR-DLS", {
-			MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
-			MATCH(DMI_BOARD_NAME, "CUR-DLS"),
-			NO_MATCH, NO_MATCH }},
-
-	{ force_acpi_ht, "ABIT i440BX-W83977", {
-			MATCH(DMI_BOARD_VENDOR, "ABIT <http://www.abit.com>"),
-			MATCH(DMI_BOARD_NAME, "i440BX-W83977 (BP6)"),
-			NO_MATCH, NO_MATCH }},
-
-	{ force_acpi_ht, "IBM Bladecenter", {
-			MATCH(DMI_BOARD_VENDOR, "IBM"),
-			MATCH(DMI_BOARD_NAME, "IBM eServer BladeCenter HS20"),
-			NO_MATCH, NO_MATCH }},
-
-	{ force_acpi_ht, "IBM eServer xSeries 360", {
-			MATCH(DMI_BOARD_VENDOR, "IBM"),
-			MATCH(DMI_BOARD_NAME, "eServer xSeries 360"),
-			NO_MATCH, NO_MATCH }},
-
-	{ force_acpi_ht, "IBM eserver xSeries 330", {
-			MATCH(DMI_BOARD_VENDOR, "IBM"),
-			MATCH(DMI_BOARD_NAME, "eserver xSeries 330"),
-			NO_MATCH, NO_MATCH }},
-
-	{ force_acpi_ht, "IBM eserver xSeries 440", {
-			MATCH(DMI_BOARD_VENDOR, "IBM"),
-			MATCH(DMI_PRODUCT_NAME, "eserver xSeries 440"),
-			NO_MATCH, NO_MATCH }},
-
-#endif	// CONFIG_ACPI_BOOT
-
-#ifdef	CONFIG_ACPI_PCI
-	/*
-	 *	Boxes that need ACPI PCI IRQ routing disabled
-	 */
-
-	{ disable_acpi_irq, "ASUS A7V", {
-			MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC"),
-			MATCH(DMI_BOARD_NAME, "<A7V>"),
-			/* newer BIOS, Revision 1011, does work */
-			MATCH(DMI_BIOS_VERSION, "ASUS A7V ACPI BIOS Revision 1007"),
-			NO_MATCH }},
-
-	/*
-	 *	Boxes that need ACPI PCI IRQ routing and PCI scan disabled
-	 */
-	{ disable_acpi_pci, "ASUS PR-DLS", {	/* _BBN 0 bug */
-			MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
-			MATCH(DMI_BOARD_NAME, "PR-DLS"),
-			MATCH(DMI_BIOS_VERSION, "ASUS PR-DLS ACPI BIOS Revision 1010"),
-			MATCH(DMI_BIOS_DATE, "03/21/2003") }},
-
- 	{ disable_acpi_pci, "Acer TravelMate 36x Laptop", {
- 			MATCH(DMI_SYS_VENDOR, "Acer"),
- 			MATCH(DMI_PRODUCT_NAME, "TravelMate 360"),
- 			NO_MATCH, NO_MATCH
- 			} },
-
-#endif
-
-	{ NULL, }
-};
-
 /*
  *	Process a DMI table entry. Right now all we care about are the BIOS
  *	and machine entries. For 2.5 we should pull the smbus controller info
  *	out of here.
  */
-
 static void __init dmi_decode(struct dmi_header *dm)
 {
-#ifdef DMI_DEBUG
-	u8 *data = (u8 *)dm;
-#endif
+	u8 *data __attribute__((__unused__)) = (u8 *)dm;
 	
-	switch(dm->type)
-	{
-		case  0:
-			dmi_printk(("BIOS Vendor: %s\n",
-				dmi_string(dm, data[4])));
-			dmi_save_ident(dm, DMI_BIOS_VENDOR, 4);
-			dmi_printk(("BIOS Version: %s\n", 
-				dmi_string(dm, data[5])));
-			dmi_save_ident(dm, DMI_BIOS_VERSION, 5);
-			dmi_printk(("BIOS Release: %s\n",
-				dmi_string(dm, data[8])));
-			dmi_save_ident(dm, DMI_BIOS_DATE, 8);
-			break;
-		case 1:
-			dmi_printk(("System Vendor: %s\n",
-				dmi_string(dm, data[4])));
-			dmi_save_ident(dm, DMI_SYS_VENDOR, 4);
-			dmi_printk(("Product Name: %s\n",
-				dmi_string(dm, data[5])));
-			dmi_save_ident(dm, DMI_PRODUCT_NAME, 5);
-			dmi_printk(("Version: %s\n",
-				dmi_string(dm, data[6])));
-			dmi_save_ident(dm, DMI_PRODUCT_VERSION, 6);
-			dmi_printk(("Serial Number: %s\n",
-				dmi_string(dm, data[7])));
-			break;
-		case 2:
-			dmi_printk(("Board Vendor: %s\n",
-				dmi_string(dm, data[4])));
-			dmi_save_ident(dm, DMI_BOARD_VENDOR, 4);
-			dmi_printk(("Board Name: %s\n",
-				dmi_string(dm, data[5])));
-			dmi_save_ident(dm, DMI_BOARD_NAME, 5);
-			dmi_printk(("Board Version: %s\n",
-				dmi_string(dm, data[6])));
-			dmi_save_ident(dm, DMI_BOARD_VERSION, 6);
-			break;
+	switch(dm->type) {
+	case  0:
+		dmi_printk(("BIOS Vendor: %s\n", dmi_string(dm, data[4])));
+		dmi_save_ident(dm, DMI_BIOS_VENDOR, 4);
+		dmi_printk(("BIOS Version: %s\n", dmi_string(dm, data[5])));
+		dmi_save_ident(dm, DMI_BIOS_VERSION, 5);
+		dmi_printk(("BIOS Release: %s\n", dmi_string(dm, data[8])));
+		dmi_save_ident(dm, DMI_BIOS_DATE, 8);
+		break;
+	case 1:
+		dmi_printk(("System Vendor: %s\n", dmi_string(dm, data[4])));
+		dmi_save_ident(dm, DMI_SYS_VENDOR, 4);
+		dmi_printk(("Product Name: %s\n", dmi_string(dm, data[5])));
+		dmi_save_ident(dm, DMI_PRODUCT_NAME, 5);
+		dmi_printk(("Version: %s\n", dmi_string(dm, data[6])));
+		dmi_save_ident(dm, DMI_PRODUCT_VERSION, 6);
+		dmi_printk(("Serial Number: %s\n", dmi_string(dm, data[7])));
+		dmi_save_ident(dm, DMI_PRODUCT_SERIAL, 7);
+		break;
+	case 2:
+		dmi_printk(("Board Vendor: %s\n", dmi_string(dm, data[4])));
+		dmi_save_ident(dm, DMI_BOARD_VENDOR, 4);
+		dmi_printk(("Board Name: %s\n", dmi_string(dm, data[5])));
+		dmi_save_ident(dm, DMI_BOARD_NAME, 5);
+		dmi_printk(("Board Version: %s\n", dmi_string(dm, data[6])));
+		dmi_save_ident(dm, DMI_BOARD_VERSION, 6);
+		break;
 	}
 }
 
 void __init dmi_scan_machine(void)
 {
-	int err = dmi_iterate(dmi_decode);
-	if(err == 0)
- 		dmi_check_system(dmi_blacklist);
-	else
+	if (dmi_iterate(dmi_decode))
 		printk(KERN_INFO "DMI not present.\n");
 }
 
@@ -470,7 +226,6 @@ fail:		d++;
 
 	return count;
 }
-
 EXPORT_SYMBOL(dmi_check_system);
 
 /**
@@ -480,8 +235,8 @@ EXPORT_SYMBOL(dmi_check_system);
  *	Returns one DMI data value, can be used to perform
  *	complex DMI data checks.
  */
-char * dmi_get_system_info(int field)
+char *dmi_get_system_info(int field)
 {
 	return dmi_ident[field];
 }
-
+EXPORT_SYMBOL(dmi_get_system_info);

arch/i386/kernel/efi.c

@@ -30,6 +30,7 @@
 #include <linux/ioport.h>
 #include <linux/module.h>
 #include <linux/efi.h>
+#include <linux/kexec.h>
 
 #include <asm/setup.h>
 #include <asm/io.h>
@@ -598,6 +599,9 @@ efi_initialize_iomem_resources(struct resource *code_resource,
 		if (md->type == EFI_CONVENTIONAL_MEMORY) {
 			request_resource(res, code_resource);
 			request_resource(res, data_resource);
+#ifdef CONFIG_KEXEC
+			request_resource(res, &crashk_res);
+#endif
 		}
 	}
 }

arch/i386/kernel/head.S

@@ -299,7 +299,6 @@ is386:	movl $2,%ecx		# set MP
 	movl %eax,%cr0
 
 	call check_x87
-	incb ready
 	lgdt cpu_gdt_descr
 	lidt idt_descr
 	ljmp $(__KERNEL_CS),$1f
@@ -316,8 +315,9 @@ is386:	movl $2,%ecx		# set MP
 	lldt %ax
 	cld			# gcc2 wants the direction flag cleared at all times
 #ifdef CONFIG_SMP
-	movb ready, %cl	
-	cmpb $1,%cl
+	movb ready, %cl
+	movb $1, ready
+	cmpb $0,%cl
 	je 1f			# the first CPU calls start_kernel
 				# all other CPUs call initialize_secondary
 	call initialize_secondary

arch/i386/kernel/i8259.c

@@ -268,10 +268,22 @@ static int i8259A_suspend(struct sys_device *dev, pm_message_t state)
 	return 0;
 }
 
+static int i8259A_shutdown(struct sys_device *dev)
+{
+	/* Put the i8259A into a quiescent state that
+	 * the kernel initialization code can get it
+	 * out of.
+	 */
+	outb(0xff, 0x21);	/* mask all of 8259A-1 */
+	outb(0xff, 0xA1);	/* mask all of 8259A-1 */
+	return 0;
+}
+
 static struct sysdev_class i8259_sysdev_class = {
 	set_kset_name("i8259"),
 	.suspend = i8259A_suspend,
 	.resume = i8259A_resume,
+	.shutdown = i8259A_shutdown,
 };
 
 static struct sys_device device_i8259A = {

arch/i386/kernel/io_apic.c

@@ -573,12 +573,14 @@ static int balanced_irq(void *unused)
 	for ( ; ; ) {
 		set_current_state(TASK_INTERRUPTIBLE);
 		time_remaining = schedule_timeout(time_remaining);
-		try_to_freeze(PF_FREEZE);
+		try_to_freeze();
 		if (time_after(jiffies,
 				prev_balance_time+balanced_irq_interval)) {
+			preempt_disable();
 			do_irq_balance();
 			prev_balance_time = jiffies;
 			time_remaining = balanced_irq_interval;
+			preempt_enable();
 		}
 	}
 	return 0;
@@ -630,10 +632,8 @@ static int __init balanced_irq_init(void)
 		printk(KERN_ERR "balanced_irq_init: failed to spawn balanced_irq");
 failed:
 	for (i = 0; i < NR_CPUS; i++) {
-		if(irq_cpu_data[i].irq_delta)
-			kfree(irq_cpu_data[i].irq_delta);
-		if(irq_cpu_data[i].last_irq)
-			kfree(irq_cpu_data[i].last_irq);
+		kfree(irq_cpu_data[i].irq_delta);
+		kfree(irq_cpu_data[i].last_irq);
 	}
 	return 0;
 }
@@ -1634,12 +1634,43 @@ static void __init enable_IO_APIC(void)
  */
 void disable_IO_APIC(void)
 {
+	int pin;
 	/*
 	 * Clear the IO-APIC before rebooting:
 	 */
 	clear_IO_APIC();
 
-	disconnect_bsp_APIC();
+	/*
+	 * If the i82559 is routed through an IOAPIC
+	 * Put that IOAPIC in virtual wire mode
+	 * so legacy interrups can be delivered.
+	 */
+	pin = find_isa_irq_pin(0, mp_ExtINT);
+	if (pin != -1) {
+		struct IO_APIC_route_entry entry;
+		unsigned long flags;
+
+		memset(&entry, 0, sizeof(entry));
+		entry.mask            = 0; /* Enabled */
+		entry.trigger         = 0; /* Edge */
+		entry.irr             = 0;
+		entry.polarity        = 0; /* High */
+		entry.delivery_status = 0;
+		entry.dest_mode       = 0; /* Physical */
+		entry.delivery_mode   = 7; /* ExtInt */
+		entry.vector          = 0;
+		entry.dest.physical.physical_dest = 0;
+
+
+		/*
+		 * Add it to the IO-APIC irq-routing table:
+		 */
+		spin_lock_irqsave(&ioapic_lock, flags);
+		io_apic_write(0, 0x11+2*pin, *(((int *)&entry)+1));
+		io_apic_write(0, 0x10+2*pin, *(((int *)&entry)+0));
+		spin_unlock_irqrestore(&ioapic_lock, flags);
+	}
+	disconnect_bsp_APIC(pin != -1);
 }
 
 /*

arch/i386/kernel/irq.c

@@ -15,6 +15,9 @@
 #include <linux/seq_file.h>
 #include <linux/interrupt.h>
 #include <linux/kernel_stat.h>
+#include <linux/notifier.h>
+#include <linux/cpu.h>
+#include <linux/delay.h>
 
 DEFINE_PER_CPU(irq_cpustat_t, irq_stat) ____cacheline_maxaligned_in_smp;
 EXPORT_PER_CPU_SYMBOL(irq_stat);
@@ -153,6 +156,11 @@ void irq_ctx_init(int cpu)
 		cpu,hardirq_ctx[cpu],softirq_ctx[cpu]);
 }
 
+void irq_ctx_exit(int cpu)
+{
+	hardirq_ctx[cpu] = NULL;
+}
+
 extern asmlinkage void __do_softirq(void);
 
 asmlinkage void do_softirq(void)
@@ -210,9 +218,8 @@ int show_interrupts(struct seq_file *p, void *v)
 
 	if (i == 0) {
 		seq_printf(p, "           ");
-		for (j=0; j<NR_CPUS; j++)
-			if (cpu_online(j))
-				seq_printf(p, "CPU%d       ",j);
+		for_each_cpu(j)
+			seq_printf(p, "CPU%d       ",j);
 		seq_putc(p, '\n');
 	}
 
@@ -225,9 +232,8 @@ int show_interrupts(struct seq_file *p, void *v)
 #ifndef CONFIG_SMP
 		seq_printf(p, "%10u ", kstat_irqs(i));
 #else
-		for (j = 0; j < NR_CPUS; j++)
-			if (cpu_online(j))
-				seq_printf(p, "%10u ", kstat_cpu(j).irqs[i]);
+		for_each_cpu(j)
+			seq_printf(p, "%10u ", kstat_cpu(j).irqs[i]);
 #endif
 		seq_printf(p, " %14s", irq_desc[i].handler->typename);
 		seq_printf(p, "  %s", action->name);
@@ -240,16 +246,14 @@ skip:
 		spin_unlock_irqrestore(&irq_desc[i].lock, flags);
 	} else if (i == NR_IRQS) {
 		seq_printf(p, "NMI: ");
-		for (j = 0; j < NR_CPUS; j++)
-			if (cpu_online(j))
-				seq_printf(p, "%10u ", nmi_count(j));
+		for_each_cpu(j)
+			seq_printf(p, "%10u ", nmi_count(j));
 		seq_putc(p, '\n');
 #ifdef CONFIG_X86_LOCAL_APIC
 		seq_printf(p, "LOC: ");
-		for (j = 0; j < NR_CPUS; j++)
-			if (cpu_online(j))
-				seq_printf(p, "%10u ",
-					per_cpu(irq_stat,j).apic_timer_irqs);
+		for_each_cpu(j)
+			seq_printf(p, "%10u ",
+				per_cpu(irq_stat,j).apic_timer_irqs);
 		seq_putc(p, '\n');
 #endif
 		seq_printf(p, "ERR: %10u\n", atomic_read(&irq_err_count));
@@ -259,3 +263,45 @@ skip:
 	}
 	return 0;
 }
+
+#ifdef CONFIG_HOTPLUG_CPU
+#include <mach_apic.h>
+
+void fixup_irqs(cpumask_t map)
+{
+	unsigned int irq;
+	static int warned;
+
+	for (irq = 0; irq < NR_IRQS; irq++) {
+		cpumask_t mask;
+		if (irq == 2)
+			continue;
+
+		cpus_and(mask, irq_affinity[irq], map);
+		if (any_online_cpu(mask) == NR_CPUS) {
+			printk("Breaking affinity for irq %i\n", irq);
+			mask = map;
+		}
+		if (irq_desc[irq].handler->set_affinity)
+			irq_desc[irq].handler->set_affinity(irq, mask);
+		else if (irq_desc[irq].action && !(warned++))
+			printk("Cannot set affinity for irq %i\n", irq);
+	}
+
+#if 0
+	barrier();
+	/* Ingo Molnar says: "after the IO-APIC masks have been redirected
+	   [note the nop - the interrupt-enable boundary on x86 is two
+	   instructions from sti] - to flush out pending hardirqs and
+	   IPIs. After this point nothing is supposed to reach this CPU." */
+	__asm__ __volatile__("sti; nop; cli");
+	barrier();
+#else
+	/* That doesn't seem sufficient.  Give it 1ms. */
+	local_irq_enable();
+	mdelay(1);
+	local_irq_disable();
+#endif
+}
+#endif
+

arch/i386/kernel/machine_kexec.c

@@ -0,0 +1,226 @@
+/*
+ * machine_kexec.c - handle transition of Linux booting another kernel
+ * Copyright (C) 2002-2005 Eric Biederman  <ebiederm@xmission.com>
+ *
+ * This source code is licensed under the GNU General Public License,
+ * Version 2.  See the file COPYING for more details.
+ */
+
+#include <linux/mm.h>
+#include <linux/kexec.h>
+#include <linux/delay.h>
+#include <asm/pgtable.h>
+#include <asm/pgalloc.h>
+#include <asm/tlbflush.h>
+#include <asm/mmu_context.h>
+#include <asm/io.h>
+#include <asm/apic.h>
+#include <asm/cpufeature.h>
+
+static inline unsigned long read_cr3(void)
+{
+	unsigned long cr3;
+	asm volatile("movl %%cr3,%0": "=r"(cr3));
+	return cr3;
+}
+
+#define PAGE_ALIGNED __attribute__ ((__aligned__(PAGE_SIZE)))
+
+#define L0_ATTR (_PAGE_PRESENT | _PAGE_RW | _PAGE_ACCESSED | _PAGE_DIRTY)
+#define L1_ATTR (_PAGE_PRESENT | _PAGE_RW | _PAGE_ACCESSED | _PAGE_DIRTY)
+#define L2_ATTR (_PAGE_PRESENT)
+
+#define LEVEL0_SIZE (1UL << 12UL)
+
+#ifndef CONFIG_X86_PAE
+#define LEVEL1_SIZE (1UL << 22UL)
+static u32 pgtable_level1[1024] PAGE_ALIGNED;
+
+static void identity_map_page(unsigned long address)
+{
+	unsigned long level1_index, level2_index;
+	u32 *pgtable_level2;
+
+	/* Find the current page table */
+	pgtable_level2 = __va(read_cr3());
+
+	/* Find the indexes of the physical address to identity map */
+	level1_index = (address % LEVEL1_SIZE)/LEVEL0_SIZE;
+	level2_index = address / LEVEL1_SIZE;
+
+	/* Identity map the page table entry */
+	pgtable_level1[level1_index] = address | L0_ATTR;
+	pgtable_level2[level2_index] = __pa(pgtable_level1) | L1_ATTR;
+
+	/* Flush the tlb so the new mapping takes effect.
+	 * Global tlb entries are not flushed but that is not an issue.
+	 */
+	load_cr3(pgtable_level2);
+}
+
+#else
+#define LEVEL1_SIZE (1UL << 21UL)
+#define LEVEL2_SIZE (1UL << 30UL)
+static u64 pgtable_level1[512] PAGE_ALIGNED;
+static u64 pgtable_level2[512] PAGE_ALIGNED;
+
+static void identity_map_page(unsigned long address)
+{
+	unsigned long level1_index, level2_index, level3_index;
+	u64 *pgtable_level3;
+
+	/* Find the current page table */
+	pgtable_level3 = __va(read_cr3());
+
+	/* Find the indexes of the physical address to identity map */
+	level1_index = (address % LEVEL1_SIZE)/LEVEL0_SIZE;
+	level2_index = (address % LEVEL2_SIZE)/LEVEL1_SIZE;
+	level3_index = address / LEVEL2_SIZE;
+
+	/* Identity map the page table entry */
+	pgtable_level1[level1_index] = address | L0_ATTR;
+	pgtable_level2[level2_index] = __pa(pgtable_level1) | L1_ATTR;
+	set_64bit(&pgtable_level3[level3_index],
+					       __pa(pgtable_level2) | L2_ATTR);
+
+	/* Flush the tlb so the new mapping takes effect.
+	 * Global tlb entries are not flushed but that is not an issue.
+	 */
+	load_cr3(pgtable_level3);
+}
+#endif
+
+
+static void set_idt(void *newidt, __u16 limit)
+{
+	unsigned char curidt[6];
+
+	/* ia32 supports unaliged loads & stores */
+	(*(__u16 *)(curidt)) = limit;
+	(*(__u32 *)(curidt +2)) = (unsigned long)(newidt);
+
+	__asm__ __volatile__ (
+		"lidt %0\n"
+		: "=m" (curidt)
+		);
+};
+
+
+static void set_gdt(void *newgdt, __u16 limit)
+{
+	unsigned char curgdt[6];
+
+	/* ia32 supports unaligned loads & stores */
+	(*(__u16 *)(curgdt)) = limit;
+	(*(__u32 *)(curgdt +2)) = (unsigned long)(newgdt);
+
+	__asm__ __volatile__ (
+		"lgdt %0\n"
+		: "=m" (curgdt)
+		);
+};
+
+static void load_segments(void)
+{
+#define __STR(X) #X
+#define STR(X) __STR(X)
+
+	__asm__ __volatile__ (
+		"\tljmp $"STR(__KERNEL_CS)",$1f\n"
+		"\t1:\n"
+		"\tmovl $"STR(__KERNEL_DS)",%eax\n"
+		"\tmovl %eax,%ds\n"
+		"\tmovl %eax,%es\n"
+		"\tmovl %eax,%fs\n"
+		"\tmovl %eax,%gs\n"
+		"\tmovl %eax,%ss\n"
+		);
+#undef STR
+#undef __STR
+}
+
+typedef asmlinkage NORET_TYPE void (*relocate_new_kernel_t)(
+					unsigned long indirection_page,
+					unsigned long reboot_code_buffer,
+					unsigned long start_address,
+					unsigned int has_pae) ATTRIB_NORET;
+
+const extern unsigned char relocate_new_kernel[];
+extern void relocate_new_kernel_end(void);
+const extern unsigned int relocate_new_kernel_size;
+
+/*
+ * A architecture hook called to validate the
+ * proposed image and prepare the control pages
+ * as needed.  The pages for KEXEC_CONTROL_CODE_SIZE
+ * have been allocated, but the segments have yet
+ * been copied into the kernel.
+ *
+ * Do what every setup is needed on image and the
+ * reboot code buffer to allow us to avoid allocations
+ * later.
+ *
+ * Currently nothing.
+ */
+int machine_kexec_prepare(struct kimage *image)
+{
+	return 0;
+}
+
+/*
+ * Undo anything leftover by machine_kexec_prepare
+ * when an image is freed.
+ */
+void machine_kexec_cleanup(struct kimage *image)
+{
+}
+
+/*
+ * Do not allocate memory (or fail in any way) in machine_kexec().
+ * We are past the point of no return, committed to rebooting now.
+ */
+NORET_TYPE void machine_kexec(struct kimage *image)
+{
+	unsigned long page_list;
+	unsigned long reboot_code_buffer;
+
+	relocate_new_kernel_t rnk;
+
+	/* Interrupts aren't acceptable while we reboot */
+	local_irq_disable();
+
+	/* Compute some offsets */
+	reboot_code_buffer = page_to_pfn(image->control_code_page)
+								<< PAGE_SHIFT;
+	page_list = image->head;
+
+	/* Set up an identity mapping for the reboot_code_buffer */
+	identity_map_page(reboot_code_buffer);
+
+	/* copy it out */
+	memcpy((void *)reboot_code_buffer, relocate_new_kernel,
+						relocate_new_kernel_size);
+
+	/* The segment registers are funny things, they are
+	 * automatically loaded from a table, in memory wherever you
+	 * set them to a specific selector, but this table is never
+	 * accessed again you set the segment to a different selector.
+	 *
+	 * The more common model is are caches where the behide
+	 * the scenes work is done, but is also dropped at arbitrary
+	 * times.
+	 *
+	 * I take advantage of this here by force loading the
+	 * segments, before I zap the gdt with an invalid value.
+	 */
+	load_segments();
+	/* The gdt & idt are now invalid.
+	 * If you want to load them you must set up your own idt & gdt.
+	 */
+	set_gdt(phys_to_virt(0),0);
+	set_idt(phys_to_virt(0),0);
+
+	/* now call it */
+	rnk = (relocate_new_kernel_t) reboot_code_buffer;
+	(*rnk)(page_list, reboot_code_buffer, image->start, cpu_has_pae);
+}

arch/i386/kernel/mpparse.c

@@ -67,7 +67,6 @@ unsigned long mp_lapic_addr;
 
 /* Processor that is doing the boot up */
 unsigned int boot_cpu_physical_apicid = -1U;
-unsigned int boot_cpu_logical_apicid = -1U;
 /* Internal processor count */
 static unsigned int __initdata num_processors;
 
@@ -180,7 +179,6 @@ static void __init MP_processor_info (struct mpc_config_processor *m)
 	if (m->mpc_cpuflag & CPU_BOOTPROCESSOR) {
 		Dprintk("    Bootup CPU\n");
 		boot_cpu_physical_apicid = m->mpc_apicid;
-		boot_cpu_logical_apicid = apicid;
 	}
 
 	if (num_processors >= NR_CPUS) {

arch/i386/kernel/process.c

@@ -13,6 +13,7 @@
 
 #include <stdarg.h>
 
+#include <linux/cpu.h>
 #include <linux/errno.h>
 #include <linux/sched.h>
 #include <linux/fs.h>
@@ -55,6 +56,9 @@
 #include <linux/irq.h>
 #include <linux/err.h>
 
+#include <asm/tlbflush.h>
+#include <asm/cpu.h>
+
 asmlinkage void ret_from_fork(void) __asm__("ret_from_fork");
 
 static int hlt_counter;
@@ -143,14 +147,42 @@ static void poll_idle (void)
 	}
 }
 
+#ifdef CONFIG_HOTPLUG_CPU
+#include <asm/nmi.h>
+/* We don't actually take CPU down, just spin without interrupts. */
+static inline void play_dead(void)
+{
+	/* This must be done before dead CPU ack */
+	cpu_exit_clear();
+	wbinvd();
+	mb();
+	/* Ack it */
+	__get_cpu_var(cpu_state) = CPU_DEAD;
+
+	/*
+	 * With physical CPU hotplug, we should halt the cpu
+	 */
+	local_irq_disable();
+	while (1)
+		__asm__ __volatile__("hlt":::"memory");
+}
+#else
+static inline void play_dead(void)
+{
+	BUG();
+}
+#endif /* CONFIG_HOTPLUG_CPU */
+
 /*
  * The idle thread. There's no useful work to be
  * done, so just try to conserve power and have a
  * low exit latency (ie sit in a loop waiting for
  * somebody to say that they'd like to reschedule)
  */
-void cpu_idle (void)
+void cpu_idle(void)
 {
+	int cpu = raw_smp_processor_id();
+
 	/* endless idle loop with no priority at all */
 	while (1) {
 		while (!need_resched()) {
@@ -165,6 +197,9 @@ void cpu_idle (void)
 			if (!idle)
 				idle = default_idle;
 
+			if (cpu_is_offline(cpu))
+				play_dead();
+
 			__get_cpu_var(irq_stat).idle_timestamp = jiffies;
 			idle();
 		}
@@ -223,7 +258,7 @@ static void mwait_idle(void)
 	}
 }
 
-void __init select_idle_routine(const struct cpuinfo_x86 *c)
+void __devinit select_idle_routine(const struct cpuinfo_x86 *c)
 {
 	if (cpu_has(c, X86_FEATURE_MWAIT)) {
 		printk("monitor/mwait feature present.\n");

arch/i386/kernel/reboot.c

@@ -26,7 +26,6 @@ static int reboot_mode;
 static int reboot_thru_bios;
 
 #ifdef CONFIG_SMP
-int reboot_smp = 0;
 static int reboot_cpu = -1;
 /* shamelessly grabbed from lib/vsprintf.c for readability */
 #define is_digit(c)	((c) >= '0' && (c) <= '9')
@@ -49,7 +48,6 @@ static int __init reboot_setup(char *str)
 			break;
 #ifdef CONFIG_SMP
 		case 's': /* "smp" reboot by executing reset on BSP or other CPU*/
-			reboot_smp = 1;
 			if (is_digit(*(str+1))) {
 				reboot_cpu = (int) (*(str+1) - '0');
 				if (is_digit(*(str+2))) 
@@ -88,33 +86,9 @@ static int __init set_bios_reboot(struct dmi_system_id *d)
 	return 0;
 }
 
-/*
- * Some machines require the "reboot=s"  commandline option, this quirk makes that automatic.
- */
-static int __init set_smp_reboot(struct dmi_system_id *d)
-{
-#ifdef CONFIG_SMP
-	if (!reboot_smp) {
-		reboot_smp = 1;
-		printk(KERN_INFO "%s series board detected. Selecting SMP-method for reboots.\n", d->ident);
-	}
-#endif
-	return 0;
-}
-
-/*
- * Some machines require the "reboot=b,s"  commandline option, this quirk makes that automatic.
- */
-static int __init set_smp_bios_reboot(struct dmi_system_id *d)
-{
-	set_smp_reboot(d);
-	set_bios_reboot(d);
-	return 0;
-}
-
 static struct dmi_system_id __initdata reboot_dmi_table[] = {
 	{	/* Handle problems with rebooting on Dell 1300's */
-		.callback = set_smp_bios_reboot,
+		.callback = set_bios_reboot,
 		.ident = "Dell PowerEdge 1300",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Dell Computer Corporation"),
@@ -301,41 +275,32 @@ void machine_real_restart(unsigned char *code, int length)
 EXPORT_SYMBOL(machine_real_restart);
 #endif
 
-void machine_restart(char * __unused)
+void machine_shutdown(void)
 {
 #ifdef CONFIG_SMP
-	int cpuid;
-	
-	cpuid = GET_APIC_ID(apic_read(APIC_ID));
-
-	if (reboot_smp) {
-
-		/* check to see if reboot_cpu is valid 
-		   if its not, default to the BSP */
-		if ((reboot_cpu == -1) ||  
-		      (reboot_cpu > (NR_CPUS -1))  || 
-		      !physid_isset(cpuid, phys_cpu_present_map))
-			reboot_cpu = boot_cpu_physical_apicid;
-
-		reboot_smp = 0;  /* use this as a flag to only go through this once*/
-		/* re-run this function on the other CPUs
-		   it will fall though this section since we have 
-		   cleared reboot_smp, and do the reboot if it is the
-		   correct CPU, otherwise it halts. */
-		if (reboot_cpu != cpuid)
-			smp_call_function((void *)machine_restart , NULL, 1, 0);
+	int reboot_cpu_id;
+
+	/* The boot cpu is always logical cpu 0 */
+	reboot_cpu_id = 0;
+
+	/* See if there has been given a command line override */
+	if ((reboot_cpu_id != -1) && (reboot_cpu < NR_CPUS) &&
+		cpu_isset(reboot_cpu, cpu_online_map)) {
+		reboot_cpu_id = reboot_cpu;
 	}
 
-	/* if reboot_cpu is still -1, then we want a tradional reboot, 
-	   and if we are not running on the reboot_cpu,, halt */
-	if ((reboot_cpu != -1) && (cpuid != reboot_cpu)) {
-		for (;;)
-		__asm__ __volatile__ ("hlt");
+	/* Make certain the cpu I'm rebooting on is online */
+	if (!cpu_isset(reboot_cpu_id, cpu_online_map)) {
+		reboot_cpu_id = smp_processor_id();
 	}
-	/*
-	 * Stop all CPUs and turn off local APICs and the IO-APIC, so
-	 * other OSs see a clean IRQ state.
+
+	/* Make certain I only run on the appropriate processor */
+	set_cpus_allowed(current, cpumask_of_cpu(reboot_cpu_id));
+
+	/* O.K. Now that I'm on the appropriate processor, stop
+	 * all of the others, and disable their local APICs.
 	 */
+
 	smp_send_stop();
 #endif /* CONFIG_SMP */
 
@@ -344,6 +309,11 @@ void machine_restart(char * __unused)
 #ifdef CONFIG_X86_IO_APIC
 	disable_IO_APIC();
 #endif
+}
+
+void machine_restart(char * __unused)
+{
+	machine_shutdown();
 
 	if (!reboot_thru_bios) {
 		if (efi_enabled) {

arch/i386/kernel/relocate_kernel.S

@@ -0,0 +1,120 @@
+/*
+ * relocate_kernel.S - put the kernel image in place to boot
+ * Copyright (C) 2002-2004 Eric Biederman  <ebiederm@xmission.com>
+ *
+ * This source code is licensed under the GNU General Public License,
+ * Version 2.  See the file COPYING for more details.
+ */
+
+#include <linux/linkage.h>
+
+	/*
+	 * Must be relocatable PIC code callable as a C function, that once
+	 * it starts can not use the previous processes stack.
+	 */
+	.globl relocate_new_kernel
+relocate_new_kernel:
+	/* read the arguments and say goodbye to the stack */
+	movl  4(%esp), %ebx /* page_list */
+	movl  8(%esp), %ebp /* reboot_code_buffer */
+	movl  12(%esp), %edx /* start address */
+	movl  16(%esp), %ecx /* cpu_has_pae */
+
+	/* zero out flags, and disable interrupts */
+	pushl $0
+	popfl
+
+	/* set a new stack at the bottom of our page... */
+	lea   4096(%ebp), %esp
+
+	/* store the parameters back on the stack */
+	pushl   %edx /* store the start address */
+
+	/* Set cr0 to a known state:
+	 * 31 0 == Paging disabled
+	 * 18 0 == Alignment check disabled
+	 * 16 0 == Write protect disabled
+	 * 3  0 == No task switch
+	 * 2  0 == Don't do FP software emulation.
+	 * 0  1 == Proctected mode enabled
+	 */
+	movl	%cr0, %eax
+	andl	$~((1<<31)|(1<<18)|(1<<16)|(1<<3)|(1<<2)), %eax
+	orl	$(1<<0), %eax
+	movl	%eax, %cr0
+
+	/* clear cr4 if applicable */
+	testl	%ecx, %ecx
+	jz	1f
+	/* Set cr4 to a known state:
+	 * Setting everything to zero seems safe.
+	 */
+	movl	%cr4, %eax
+	andl	$0, %eax
+	movl	%eax, %cr4
+
+	jmp 1f
+1:
+
+	/* Flush the TLB (needed?) */
+	xorl	%eax, %eax
+	movl	%eax, %cr3
+
+	/* Do the copies */
+	movl	%ebx, %ecx
+	jmp	1f
+
+0:	/* top, read another word from the indirection page */
+	movl	(%ebx), %ecx
+	addl	$4, %ebx
+1:
+	testl	$0x1,   %ecx  /* is it a destination page */
+	jz	2f
+	movl	%ecx,	%edi
+	andl	$0xfffff000, %edi
+	jmp     0b
+2:
+	testl	$0x2,	%ecx  /* is it an indirection page */
+	jz	2f
+	movl	%ecx,	%ebx
+	andl	$0xfffff000, %ebx
+	jmp     0b
+2:
+	testl   $0x4,   %ecx /* is it the done indicator */
+	jz      2f
+	jmp     3f
+2:
+	testl   $0x8,   %ecx /* is it the source indicator */
+	jz      0b	     /* Ignore it otherwise */
+	movl    %ecx,   %esi /* For every source page do a copy */
+	andl    $0xfffff000, %esi
+
+	movl    $1024, %ecx
+	rep ; movsl
+	jmp     0b
+
+3:
+
+	/* To be certain of avoiding problems with self-modifying code
+	 * I need to execute a serializing instruction here.
+	 * So I flush the TLB, it's handy, and not processor dependent.
+	 */
+	xorl	%eax, %eax
+	movl	%eax, %cr3
+
+	/* set all of the registers to known values */
+	/* leave %esp alone */
+
+	xorl	%eax, %eax
+	xorl	%ebx, %ebx
+	xorl    %ecx, %ecx
+	xorl    %edx, %edx
+	xorl    %esi, %esi
+	xorl    %edi, %edi
+	xorl    %ebp, %ebp
+	ret
+relocate_new_kernel_end:
+
+	.globl relocate_new_kernel_size
+relocate_new_kernel_size:
+	.long relocate_new_kernel_end - relocate_new_kernel

arch/i386/kernel/setup.c

@@ -43,7 +43,12 @@
 #include <linux/init.h>
 #include <linux/edd.h>
 #include <linux/nodemask.h>
+#include <linux/kexec.h>
+#include <linux/crash_dump.h>
+
 #include <video/edid.h>
+
+#include <asm/apic.h>
 #include <asm/e820.h>
 #include <asm/mpspec.h>
 #include <asm/setup.h>
@@ -55,12 +60,15 @@
 #include "setup_arch_pre.h"
 #include <bios_ebda.h>
 
+/* Forward Declaration. */
+void __init find_max_pfn(void);
+
 /* This value is set up by the early boot code to point to the value
    immediately after the boot time page tables.  It contains a *physical*
    address, and must not be in the .bss segment! */
 unsigned long init_pg_tables_end __initdata = ~0UL;
 
-int disable_pse __initdata = 0;
+int disable_pse __devinitdata = 0;
 
 /*
  * Machine setup..
@@ -732,6 +740,15 @@ static void __init parse_cmdline_early (char ** cmdline_p)
 			if (to != command_line)
 				to--;
 			if (!memcmp(from+7, "exactmap", 8)) {
+#ifdef CONFIG_CRASH_DUMP
+				/* If we are doing a crash dump, we
+				 * still need to know the real mem
+				 * size before original memory map is
+				 * reset.
+				 */
+				find_max_pfn();
+				saved_max_pfn = max_pfn;
+#endif
 				from += 8+7;
 				e820.nr_map = 0;
 				userdef = 1;
@@ -835,6 +852,44 @@ static void __init parse_cmdline_early (char ** cmdline_p)
 #endif /* CONFIG_X86_LOCAL_APIC */
 #endif /* CONFIG_ACPI_BOOT */
 
+#ifdef CONFIG_X86_LOCAL_APIC
+		/* enable local APIC */
+		else if (!memcmp(from, "lapic", 5))
+			lapic_enable();
+
+		/* disable local APIC */
+		else if (!memcmp(from, "nolapic", 6))
+			lapic_disable();
+#endif /* CONFIG_X86_LOCAL_APIC */
+
+#ifdef CONFIG_KEXEC
+		/* crashkernel=size@addr specifies the location to reserve for
+		 * a crash kernel.  By reserving this memory we guarantee
+		 * that linux never set's it up as a DMA target.
+		 * Useful for holding code to do something appropriate
+		 * after a kernel panic.
+		 */
+		else if (!memcmp(from, "crashkernel=", 12)) {
+			unsigned long size, base;
+			size = memparse(from+12, &from);
+			if (*from == '@') {
+				base = memparse(from+1, &from);
+				/* FIXME: Do I want a sanity check
+				 * to validate the memory range?
+				 */
+				crashk_res.start = base;
+				crashk_res.end   = base + size - 1;
+			}
+		}
+#endif
+#ifdef CONFIG_CRASH_DUMP
+		/* elfcorehdr= specifies the location of elf core header
+		 * stored by the crashed kernel.
+		 */
+		else if (!memcmp(from, "elfcorehdr=", 11))
+			elfcorehdr_addr = memparse(from+11, &from);
+#endif
+
 		/*
 		 * highmem=size forces highmem to be exactly 'size' bytes.
 		 * This works even on boxes that have no highmem otherwise.
@@ -1113,8 +1168,8 @@ void __init setup_bootmem_allocator(void)
 	 * the (very unlikely) case of us accidentally initializing the
 	 * bootmem allocator with an invalid RAM area.
 	 */
-	reserve_bootmem(HIGH_MEMORY, (PFN_PHYS(min_low_pfn) +
-			 bootmap_size + PAGE_SIZE-1) - (HIGH_MEMORY));
+	reserve_bootmem(__PHYSICAL_START, (PFN_PHYS(min_low_pfn) +
+			 bootmap_size + PAGE_SIZE-1) - (__PHYSICAL_START));
 
 	/*
 	 * reserve physical page 0 - it's a special BIOS page on many boxes,
@@ -1170,6 +1225,11 @@ void __init setup_bootmem_allocator(void)
 		}
 	}
 #endif
+#ifdef CONFIG_KEXEC
+	if (crashk_res.start != crashk_res.end)
+		reserve_bootmem(crashk_res.start,
+			crashk_res.end - crashk_res.start + 1);
+#endif
 }
 
 /*
@@ -1223,6 +1283,9 @@ legacy_init_iomem_resources(struct resource *code_resource, struct resource *dat
 			 */
 			request_resource(res, code_resource);
 			request_resource(res, data_resource);
+#ifdef CONFIG_KEXEC
+			request_resource(res, &crashk_res);
+#endif
 		}
 	}
 }

arch/i386/kernel/signal.c

@@ -608,10 +608,8 @@ int fastcall do_signal(struct pt_regs *regs, sigset_t *oldset)
 	if (!user_mode(regs))
 		return 1;
 
-	if (current->flags & PF_FREEZE) {
-		refrigerator(0);
+	if (try_to_freeze())
 		goto no_signal;
-	}
 
 	if (!oldset)
 		oldset = &current->blocked;

arch/i386/kernel/smp.c

@@ -19,6 +19,7 @@
 #include <linux/mc146818rtc.h>
 #include <linux/cache.h>
 #include <linux/interrupt.h>
+#include <linux/cpu.h>
 #include <linux/module.h>
 
 #include <asm/mtrr.h>
@@ -164,7 +165,7 @@ void send_IPI_mask_bitmask(cpumask_t cpumask, int vector)
 	unsigned long flags;
 
 	local_irq_save(flags);
-		
+	WARN_ON(mask & ~cpus_addr(cpu_online_map)[0]);
 	/*
 	 * Wait for idle.
 	 */
@@ -346,21 +347,21 @@ out:
 static void flush_tlb_others(cpumask_t cpumask, struct mm_struct *mm,
 						unsigned long va)
 {
-	cpumask_t tmp;
 	/*
 	 * A couple of (to be removed) sanity checks:
 	 *
-	 * - we do not send IPIs to not-yet booted CPUs.
 	 * - current CPU must not be in mask
 	 * - mask must exist :)
 	 */
 	BUG_ON(cpus_empty(cpumask));
-
-	cpus_and(tmp, cpumask, cpu_online_map);
-	BUG_ON(!cpus_equal(cpumask, tmp));
 	BUG_ON(cpu_isset(smp_processor_id(), cpumask));
 	BUG_ON(!mm);
 
+	/* If a CPU which we ran on has gone down, OK. */
+	cpus_and(cpumask, cpumask, cpu_online_map);
+	if (cpus_empty(cpumask))
+		return;
+
 	/*
 	 * i'm not happy about this global shared spinlock in the
 	 * MM hot path, but we'll see how contended it is.
@@ -476,6 +477,7 @@ void flush_tlb_all(void)
  */
 void smp_send_reschedule(int cpu)
 {
+	WARN_ON(cpu_is_offline(cpu));
 	send_IPI_mask(cpumask_of_cpu(cpu), RESCHEDULE_VECTOR);
 }
 
@@ -493,6 +495,16 @@ struct call_data_struct {
 	int wait;
 };
 
+void lock_ipi_call_lock(void)
+{
+	spin_lock_irq(&call_lock);
+}
+
+void unlock_ipi_call_lock(void)
+{
+	spin_unlock_irq(&call_lock);
+}
+
 static struct call_data_struct * call_data;
 
 /*
@@ -516,10 +528,15 @@ int smp_call_function (void (*func) (void *info), void *info, int nonatomic,
  */
 {
 	struct call_data_struct data;
-	int cpus = num_online_cpus()-1;
+	int cpus;
 
-	if (!cpus)
+	/* Holding any lock stops cpus from going down. */
+	spin_lock(&call_lock);
+	cpus = num_online_cpus() - 1;
+	if (!cpus) {
+		spin_unlock(&call_lock);
 		return 0;
+	}
 
 	/* Can deadlock when called with interrupts disabled */
 	WARN_ON(irqs_disabled());
@@ -531,7 +548,6 @@ int smp_call_function (void (*func) (void *info), void *info, int nonatomic,
 	if (wait)
 		atomic_set(&data.finished, 0);
 
-	spin_lock(&call_lock);
 	call_data = &data;
 	mb();
 	

arch/i386/kernel/smpboot.c

@@ -44,6 +44,9 @@
 #include <linux/smp_lock.h>
 #include <linux/irq.h>
 #include <linux/bootmem.h>
+#include <linux/notifier.h>
+#include <linux/cpu.h>
+#include <linux/percpu.h>
 
 #include <linux/delay.h>
 #include <linux/mc146818rtc.h>
@@ -56,18 +59,28 @@
 #include <smpboot_hooks.h>
 
 /* Set if we find a B stepping CPU */
-static int __initdata smp_b_stepping;
+static int __devinitdata smp_b_stepping;
 
 /* Number of siblings per CPU package */
 int smp_num_siblings = 1;
 #ifdef CONFIG_X86_HT
 EXPORT_SYMBOL(smp_num_siblings);
 #endif
-int phys_proc_id[NR_CPUS]; /* Package ID of each logical CPU */
+
+/* Package ID of each logical CPU */
+int phys_proc_id[NR_CPUS] = {[0 ... NR_CPUS-1] = BAD_APICID};
 EXPORT_SYMBOL(phys_proc_id);
-int cpu_core_id[NR_CPUS]; /* Core ID of each logical CPU */
+
+/* Core ID of each logical CPU */
+int cpu_core_id[NR_CPUS] = {[0 ... NR_CPUS-1] = BAD_APICID};
 EXPORT_SYMBOL(cpu_core_id);
 
+cpumask_t cpu_sibling_map[NR_CPUS];
+EXPORT_SYMBOL(cpu_sibling_map);
+
+cpumask_t cpu_core_map[NR_CPUS];
+EXPORT_SYMBOL(cpu_core_map);
+
 /* bitmap of online cpus */
 cpumask_t cpu_online_map;
 EXPORT_SYMBOL(cpu_online_map);
@@ -77,6 +90,12 @@ cpumask_t cpu_callout_map;
 EXPORT_SYMBOL(cpu_callout_map);
 static cpumask_t smp_commenced_mask;
 
+/* TSC's upper 32 bits can't be written in eariler CPU (before prescott), there
+ * is no way to resync one AP against BP. TBD: for prescott and above, we
+ * should use IA64's algorithm
+ */
+static int __devinitdata tsc_sync_disabled;
+
 /* Per CPU bogomips and other parameters */
 struct cpuinfo_x86 cpu_data[NR_CPUS] __cacheline_aligned;
 EXPORT_SYMBOL(cpu_data);
@@ -96,13 +115,16 @@ static int trampoline_exec;
 
 static void map_cpu_to_logical_apicid(void);
 
+/* State of each CPU. */
+DEFINE_PER_CPU(int, cpu_state) = { 0 };
+
 /*
  * Currently trivial. Write the real->protected mode
  * bootstrap into the page concerned. The caller
  * has made sure it's suitably aligned.
  */
 
-static unsigned long __init setup_trampoline(void)
+static unsigned long __devinit setup_trampoline(void)
 {
 	memcpy(trampoline_base, trampoline_data, trampoline_end - trampoline_data);
 	return virt_to_phys(trampoline_base);
@@ -132,7 +154,7 @@ void __init smp_alloc_memory(void)
  * a given CPU
  */
 
-static void __init smp_store_cpu_info(int id)
+static void __devinit smp_store_cpu_info(int id)
 {
 	struct cpuinfo_x86 *c = cpu_data + id;
 
@@ -326,7 +348,7 @@ extern void calibrate_delay(void);
 
 static atomic_t init_deasserted;
 
-static void __init smp_callin(void)
+static void __devinit smp_callin(void)
 {
 	int cpuid, phys_id;
 	unsigned long timeout;
@@ -411,16 +433,48 @@ static void __init smp_callin(void)
 	/*
 	 *      Synchronize the TSC with the BP
 	 */
-	if (cpu_has_tsc && cpu_khz)
+	if (cpu_has_tsc && cpu_khz && !tsc_sync_disabled)
 		synchronize_tsc_ap();
 }
 
 static int cpucount;
 
+static inline void
+set_cpu_sibling_map(int cpu)
+{
+	int i;
+
+	if (smp_num_siblings > 1) {
+		for (i = 0; i < NR_CPUS; i++) {
+			if (!cpu_isset(i, cpu_callout_map))
+				continue;
+			if (cpu_core_id[cpu] == cpu_core_id[i]) {
+				cpu_set(i, cpu_sibling_map[cpu]);
+				cpu_set(cpu, cpu_sibling_map[i]);
+			}
+		}
+	} else {
+		cpu_set(cpu, cpu_sibling_map[cpu]);
+	}
+
+	if (current_cpu_data.x86_num_cores > 1) {
+		for (i = 0; i < NR_CPUS; i++) {
+			if (!cpu_isset(i, cpu_callout_map))
+				continue;
+			if (phys_proc_id[cpu] == phys_proc_id[i]) {
+				cpu_set(i, cpu_core_map[cpu]);
+				cpu_set(cpu, cpu_core_map[i]);
+			}
+		}
+	} else {
+		cpu_core_map[cpu] = cpu_sibling_map[cpu];
+	}
+}
+
 /*
  * Activate a secondary processor.
  */
-static void __init start_secondary(void *unused)
+static void __devinit start_secondary(void *unused)
 {
 	/*
 	 * Dont put anything before smp_callin(), SMP
@@ -443,7 +497,23 @@ static void __init start_secondary(void *unused)
 	 * the local TLBs too.
 	 */
 	local_flush_tlb();
+
+	/* This must be done before setting cpu_online_map */
+	set_cpu_sibling_map(raw_smp_processor_id());
+	wmb();
+
+	/*
+	 * We need to hold call_lock, so there is no inconsistency
+	 * between the time smp_call_function() determines number of
+	 * IPI receipients, and the time when the determination is made
+	 * for which cpus receive the IPI. Holding this
+	 * lock helps us to not include this cpu in a currently in progress
+	 * smp_call_function().
+	 */
+	lock_ipi_call_lock();
 	cpu_set(smp_processor_id(), cpu_online_map);
+	unlock_ipi_call_lock();
+	per_cpu(cpu_state, smp_processor_id()) = CPU_ONLINE;
 
 	/* We can take interrupts now: we're officially "up". */
 	local_irq_enable();
@@ -458,7 +528,7 @@ static void __init start_secondary(void *unused)
  * from the task structure
  * This function must not return.
  */
-void __init initialize_secondary(void)
+void __devinit initialize_secondary(void)
 {
 	/*
 	 * We don't actually need to load the full TSS,
@@ -572,7 +642,7 @@ static inline void __inquire_remote_apic(int apicid)
  * INIT, INIT, STARTUP sequence will reset the chip hard for us, and this
  * won't ... remember to clear down the APIC, etc later.
  */
-static int __init
+static int __devinit
 wakeup_secondary_cpu(int logical_apicid, unsigned long start_eip)
 {
 	unsigned long send_status = 0, accept_status = 0;
@@ -618,7 +688,7 @@ wakeup_secondary_cpu(int logical_apicid, unsigned long start_eip)
 #endif	/* WAKE_SECONDARY_VIA_NMI */
 
 #ifdef WAKE_SECONDARY_VIA_INIT
-static int __init
+static int __devinit
 wakeup_secondary_cpu(int phys_apicid, unsigned long start_eip)
 {
 	unsigned long send_status = 0, accept_status = 0;
@@ -753,8 +823,43 @@ wakeup_secondary_cpu(int phys_apicid, unsigned long start_eip)
 #endif	/* WAKE_SECONDARY_VIA_INIT */
 
 extern cpumask_t cpu_initialized;
+static inline int alloc_cpu_id(void)
+{
+	cpumask_t	tmp_map;
+	int cpu;
+	cpus_complement(tmp_map, cpu_present_map);
+	cpu = first_cpu(tmp_map);
+	if (cpu >= NR_CPUS)
+		return -ENODEV;
+	return cpu;
+}
+
+#ifdef CONFIG_HOTPLUG_CPU
+static struct task_struct * __devinitdata cpu_idle_tasks[NR_CPUS];
+static inline struct task_struct * alloc_idle_task(int cpu)
+{
+	struct task_struct *idle;
+
+	if ((idle = cpu_idle_tasks[cpu]) != NULL) {
+		/* initialize thread_struct.  we really want to avoid destroy
+		 * idle tread
+		 */
+		idle->thread.esp = (unsigned long)(((struct pt_regs *)
+			(THREAD_SIZE + (unsigned long) idle->thread_info)) - 1);
+		init_idle(idle, cpu);
+		return idle;
+	}
+	idle = fork_idle(cpu);
+
+	if (!IS_ERR(idle))
+		cpu_idle_tasks[cpu] = idle;
+	return idle;
+}
+#else
+#define alloc_idle_task(cpu) fork_idle(cpu)
+#endif
 
-static int __init do_boot_cpu(int apicid)
+static int __devinit do_boot_cpu(int apicid, int cpu)
 /*
  * NOTE - on most systems this is a PHYSICAL apic ID, but on multiquad
  * (ie clustered apic addressing mode), this is a LOGICAL apic ID.
@@ -763,16 +868,17 @@ static int __init do_boot_cpu(int apicid)
 {
 	struct task_struct *idle;
 	unsigned long boot_error;
-	int timeout, cpu;
+	int timeout;
 	unsigned long start_eip;
 	unsigned short nmi_high = 0, nmi_low = 0;
 
-	cpu = ++cpucount;
+	++cpucount;
+
 	/*
 	 * We can't use kernel_thread since we must avoid to
 	 * reschedule the child.
 	 */
-	idle = fork_idle(cpu);
+	idle = alloc_idle_task(cpu);
 	if (IS_ERR(idle))
 		panic("failed fork for CPU %d", cpu);
 	idle->thread.eip = (unsigned long) start_secondary;
@@ -839,13 +945,16 @@ static int __init do_boot_cpu(int apicid)
 			inquire_remote_apic(apicid);
 		}
 	}
-	x86_cpu_to_apicid[cpu] = apicid;
+
 	if (boot_error) {
 		/* Try to put things back the way they were before ... */
 		unmap_cpu_to_logical_apicid(cpu);
 		cpu_clear(cpu, cpu_callout_map); /* was set here (do_boot_cpu()) */
 		cpu_clear(cpu, cpu_initialized); /* was set by cpu_init() */
 		cpucount--;
+	} else {
+		x86_cpu_to_apicid[cpu] = apicid;
+		cpu_set(cpu, cpu_present_map);
 	}
 
 	/* mark "stuck" area as not stuck */
@@ -854,6 +963,75 @@ static int __init do_boot_cpu(int apicid)
 	return boot_error;
 }
 
+#ifdef CONFIG_HOTPLUG_CPU
+void cpu_exit_clear(void)
+{
+	int cpu = raw_smp_processor_id();
+
+	idle_task_exit();
+
+	cpucount --;
+	cpu_uninit();
+	irq_ctx_exit(cpu);
+
+	cpu_clear(cpu, cpu_callout_map);
+	cpu_clear(cpu, cpu_callin_map);
+	cpu_clear(cpu, cpu_present_map);
+
+	cpu_clear(cpu, smp_commenced_mask);
+	unmap_cpu_to_logical_apicid(cpu);
+}
+
+struct warm_boot_cpu_info {
+	struct completion *complete;
+	int apicid;
+	int cpu;
+};
+
+static void __devinit do_warm_boot_cpu(void *p)
+{
+	struct warm_boot_cpu_info *info = p;
+	do_boot_cpu(info->apicid, info->cpu);
+	complete(info->complete);
+}
+
+int __devinit smp_prepare_cpu(int cpu)
+{
+	DECLARE_COMPLETION(done);
+	struct warm_boot_cpu_info info;
+	struct work_struct task;
+	int	apicid, ret;
+
+	lock_cpu_hotplug();
+	apicid = x86_cpu_to_apicid[cpu];
+	if (apicid == BAD_APICID) {
+		ret = -ENODEV;
+		goto exit;
+	}
+
+	info.complete = &done;
+	info.apicid = apicid;
+	info.cpu = cpu;
+	INIT_WORK(&task, do_warm_boot_cpu, &info);
+
+	tsc_sync_disabled = 1;
+
+	/* init low mem mapping */
+	memcpy(swapper_pg_dir, swapper_pg_dir + USER_PGD_PTRS,
+			sizeof(swapper_pg_dir[0]) * KERNEL_PGD_PTRS);
+	flush_tlb_all();
+	schedule_work(&task);
+	wait_for_completion(&done);
+
+	tsc_sync_disabled = 0;
+	zap_low_mappings();
+	ret = 0;
+exit:
+	unlock_cpu_hotplug();
+	return ret;
+}
+#endif
+
 static void smp_tune_scheduling (void)
 {
 	unsigned long cachesize;       /* kB   */
@@ -895,13 +1073,6 @@ void *xquad_portio;
 EXPORT_SYMBOL(xquad_portio);
 #endif
 
-cpumask_t cpu_sibling_map[NR_CPUS] __cacheline_aligned;
-#ifdef CONFIG_X86_HT
-EXPORT_SYMBOL(cpu_sibling_map);
-#endif
-cpumask_t cpu_core_map[NR_CPUS] __cacheline_aligned;
-EXPORT_SYMBOL(cpu_core_map);
-
 static void __init smp_boot_cpus(unsigned int max_cpus)
 {
 	int apicid, cpu, bit, kicked;
@@ -1013,7 +1184,7 @@ static void __init smp_boot_cpus(unsigned int max_cpus)
 		if (max_cpus <= cpucount+1)
 			continue;
 
-		if (do_boot_cpu(apicid))
+		if (((cpu = alloc_cpu_id()) <= 0) || do_boot_cpu(apicid, cpu))
 			printk("CPU #%d not responding - cannot use it.\n",
 								apicid);
 		else
@@ -1065,44 +1236,8 @@ static void __init smp_boot_cpus(unsigned int max_cpus)
 		cpus_clear(cpu_core_map[cpu]);
 	}
 
-	for (cpu = 0; cpu < NR_CPUS; cpu++) {
-		struct cpuinfo_x86 *c = cpu_data + cpu;
-		int siblings = 0;
-		int i;
-		if (!cpu_isset(cpu, cpu_callout_map))
-			continue;
-
-		if (smp_num_siblings > 1) {
-			for (i = 0; i < NR_CPUS; i++) {
-				if (!cpu_isset(i, cpu_callout_map))
-					continue;
-				if (cpu_core_id[cpu] == cpu_core_id[i]) {
-					siblings++;
-					cpu_set(i, cpu_sibling_map[cpu]);
-				}
-			}
-		} else {
-			siblings++;
-			cpu_set(cpu, cpu_sibling_map[cpu]);
-		}
-
-		if (siblings != smp_num_siblings) {
-			printk(KERN_WARNING "WARNING: %d siblings found for CPU%d, should be %d\n", siblings, cpu, smp_num_siblings);
-			smp_num_siblings = siblings;
-		}
-
-		if (c->x86_num_cores > 1) {
-			for (i = 0; i < NR_CPUS; i++) {
-				if (!cpu_isset(i, cpu_callout_map))
-					continue;
-				if (phys_proc_id[cpu] == phys_proc_id[i]) {
-					cpu_set(i, cpu_core_map[cpu]);
-				}
-			}
-		} else {
-			cpu_core_map[cpu] = cpu_sibling_map[cpu];
-		}
-	}
+	cpu_set(0, cpu_sibling_map[0]);
+	cpu_set(0, cpu_core_map[0]);
 
 	smpboot_setup_io_apic();
 
@@ -1119,6 +1254,9 @@ static void __init smp_boot_cpus(unsigned int max_cpus)
    who understands all this stuff should rewrite it properly. --RR 15/Jul/02 */
 void __init smp_prepare_cpus(unsigned int max_cpus)
 {
+	smp_commenced_mask = cpumask_of_cpu(0);
+	cpu_callin_map = cpumask_of_cpu(0);
+	mb();
 	smp_boot_cpus(max_cpus);
 }
 
@@ -1126,23 +1264,98 @@ void __devinit smp_prepare_boot_cpu(void)
 {
 	cpu_set(smp_processor_id(), cpu_online_map);
 	cpu_set(smp_processor_id(), cpu_callout_map);
+	cpu_set(smp_processor_id(), cpu_present_map);
+	per_cpu(cpu_state, smp_processor_id()) = CPU_ONLINE;
 }
 
-int __devinit __cpu_up(unsigned int cpu)
+#ifdef CONFIG_HOTPLUG_CPU
+static void
+remove_siblinginfo(int cpu)
 {
-	/* This only works at boot for x86.  See "rewrite" above. */
-	if (cpu_isset(cpu, smp_commenced_mask)) {
-		local_irq_enable();
-		return -ENOSYS;
+	int sibling;
+
+	for_each_cpu_mask(sibling, cpu_sibling_map[cpu])
+		cpu_clear(cpu, cpu_sibling_map[sibling]);
+	for_each_cpu_mask(sibling, cpu_core_map[cpu])
+		cpu_clear(cpu, cpu_core_map[sibling]);
+	cpus_clear(cpu_sibling_map[cpu]);
+	cpus_clear(cpu_core_map[cpu]);
+	phys_proc_id[cpu] = BAD_APICID;
+	cpu_core_id[cpu] = BAD_APICID;
+}
+
+int __cpu_disable(void)
+{
+	cpumask_t map = cpu_online_map;
+	int cpu = smp_processor_id();
+
+	/*
+	 * Perhaps use cpufreq to drop frequency, but that could go
+	 * into generic code.
+ 	 *
+	 * We won't take down the boot processor on i386 due to some
+	 * interrupts only being able to be serviced by the BSP.
+	 * Especially so if we're not using an IOAPIC	-zwane
+	 */
+	if (cpu == 0)
+		return -EBUSY;
+
+	/* We enable the timer again on the exit path of the death loop */
+	disable_APIC_timer();
+	/* Allow any queued timer interrupts to get serviced */
+	local_irq_enable();
+	mdelay(1);
+	local_irq_disable();
+
+	remove_siblinginfo(cpu);
+
+	cpu_clear(cpu, map);
+	fixup_irqs(map);
+	/* It's now safe to remove this processor from the online map */
+	cpu_clear(cpu, cpu_online_map);
+	return 0;
+}
+
+void __cpu_die(unsigned int cpu)
+{
+	/* We don't do anything here: idle task is faking death itself. */
+	unsigned int i;
+
+	for (i = 0; i < 10; i++) {
+		/* They ack this in play_dead by setting CPU_DEAD */
+		if (per_cpu(cpu_state, cpu) == CPU_DEAD) {
+			printk ("CPU %d is now offline\n", cpu);
+			return;
+		}
+		current->state = TASK_UNINTERRUPTIBLE;
+		schedule_timeout(HZ/10);
 	}
+ 	printk(KERN_ERR "CPU %u didn't die...\n", cpu);
+}
+#else /* ... !CONFIG_HOTPLUG_CPU */
+int __cpu_disable(void)
+{
+	return -ENOSYS;
+}
+
+void __cpu_die(unsigned int cpu)
+{
+	/* We said "no" in __cpu_disable */
+	BUG();
+}
+#endif /* CONFIG_HOTPLUG_CPU */
 
+int __devinit __cpu_up(unsigned int cpu)
+{
 	/* In case one didn't come up */
 	if (!cpu_isset(cpu, cpu_callin_map)) {
+		printk(KERN_DEBUG "skipping cpu%d, didn't come online\n", cpu);
 		local_irq_enable();
 		return -EIO;
 	}
 
 	local_irq_enable();
+	per_cpu(cpu_state, cpu) = CPU_UP_PREPARE;
 	/* Unleash the CPU! */
 	cpu_set(cpu, smp_commenced_mask);
 	while (!cpu_isset(cpu, cpu_online_map))
@@ -1156,10 +1369,12 @@ void __init smp_cpus_done(unsigned int max_cpus)
 	setup_ioapic_dest();
 #endif
 	zap_low_mappings();
+#ifndef CONFIG_HOTPLUG_CPU
 	/*
 	 * Disable executability of the SMP trampoline:
 	 */
 	set_kernel_exec((unsigned long)trampoline_base, trampoline_exec);
+#endif
 }
 
 void __init smp_intr_init(void)

arch/i386/kernel/syscall_table.S

@@ -283,7 +283,7 @@ ENTRY(sys_call_table)
 	.long sys_mq_timedreceive	/* 280 */
 	.long sys_mq_notify
 	.long sys_mq_getsetattr
-	.long sys_ni_syscall		/* reserved for kexec */
+	.long sys_kexec_load
 	.long sys_waitid
 	.long sys_ni_syscall		/* 285 */ /* available */
 	.long sys_add_key

arch/i386/kernel/sysenter.c

@@ -21,11 +21,16 @@
 
 extern asmlinkage void sysenter_entry(void);
 
-void enable_sep_cpu(void *info)
+void enable_sep_cpu(void)
 {
 	int cpu = get_cpu();
 	struct tss_struct *tss = &per_cpu(init_tss, cpu);
 
+	if (!boot_cpu_has(X86_FEATURE_SEP)) {
+		put_cpu();
+		return;
+	}
+
 	tss->ss1 = __KERNEL_CS;
 	tss->esp1 = sizeof(struct tss_struct) + (unsigned long) tss;
 	wrmsr(MSR_IA32_SYSENTER_CS, __KERNEL_CS, 0);
@@ -41,7 +46,7 @@ void enable_sep_cpu(void *info)
 extern const char vsyscall_int80_start, vsyscall_int80_end;
 extern const char vsyscall_sysenter_start, vsyscall_sysenter_end;
 
-static int __init sysenter_setup(void)
+int __init sysenter_setup(void)
 {
 	void *page = (void *)get_zeroed_page(GFP_ATOMIC);
 
@@ -58,8 +63,5 @@ static int __init sysenter_setup(void)
 	       &vsyscall_sysenter_start,
 	       &vsyscall_sysenter_end - &vsyscall_sysenter_start);
 
-	on_each_cpu(enable_sep_cpu, NULL, 1, 1);
 	return 0;
 }
-
-__initcall(sysenter_setup);

arch/i386/kernel/time_hpet.c

@@ -50,7 +50,7 @@ static void hpet_writel(unsigned long d, unsigned long a)
  * comparator value and continue. Next tick can be caught by checking
  * for a change in the comparator value. Used in apic.c.
  */
-static void __init wait_hpet_tick(void)
+static void __devinit wait_hpet_tick(void)
 {
 	unsigned int start_cmp_val, end_cmp_val;
 

arch/i386/kernel/timers/common.c

@@ -86,7 +86,7 @@ bad_ctc:
 #define CALIBRATE_CNT_HPET 	(5 * hpet_tick)
 #define CALIBRATE_TIME_HPET 	(5 * KERNEL_TICK_USEC)
 
-unsigned long __init calibrate_tsc_hpet(unsigned long *tsc_hpet_quotient_ptr)
+unsigned long __devinit calibrate_tsc_hpet(unsigned long *tsc_hpet_quotient_ptr)
 {
 	unsigned long tsc_startlow, tsc_starthigh;
 	unsigned long tsc_endlow, tsc_endhigh;

arch/i386/kernel/timers/timer_tsc.c

@@ -33,7 +33,7 @@ static struct timer_opts timer_tsc;
 
 static inline void cpufreq_delayed_get(void);
 
-int tsc_disable __initdata = 0;
+int tsc_disable __devinitdata = 0;
 
 extern spinlock_t i8253_lock;
 

arch/i386/kernel/traps.c

@@ -27,6 +27,7 @@
 #include <linux/ptrace.h>
 #include <linux/utsname.h>
 #include <linux/kprobes.h>
+#include <linux/kexec.h>
 
 #ifdef CONFIG_EISA
 #include <linux/ioport.h>
@@ -234,22 +235,22 @@ void show_registers(struct pt_regs *regs)
 	 * time of the fault..
 	 */
 	if (in_kernel) {
-		u8 *eip;
+		u8 __user *eip;
 
 		printk("\nStack: ");
 		show_stack(NULL, (unsigned long*)esp);
 
 		printk("Code: ");
 
-		eip = (u8 *)regs->eip - 43;
+		eip = (u8 __user *)regs->eip - 43;
 		for (i = 0; i < 64; i++, eip++) {
 			unsigned char c;
 
-			if (eip < (u8 *)PAGE_OFFSET || __get_user(c, eip)) {
+			if (eip < (u8 __user *)PAGE_OFFSET || __get_user(c, eip)) {
 				printk(" Bad EIP value.");
 				break;
 			}
-			if (eip == (u8 *)regs->eip)
+			if (eip == (u8 __user *)regs->eip)
 				printk("<%02x> ", c);
 			else
 				printk("%02x ", c);
@@ -273,13 +274,13 @@ static void handle_BUG(struct pt_regs *regs)
 
 	if (eip < PAGE_OFFSET)
 		goto no_bug;
-	if (__get_user(ud2, (unsigned short *)eip))
+	if (__get_user(ud2, (unsigned short __user *)eip))
 		goto no_bug;
 	if (ud2 != 0x0b0f)
 		goto no_bug;
-	if (__get_user(line, (unsigned short *)(eip + 2)))
+	if (__get_user(line, (unsigned short __user *)(eip + 2)))
 		goto bug;
-	if (__get_user(file, (char **)(eip + 4)) ||
+	if (__get_user(file, (char * __user *)(eip + 4)) ||
 		(unsigned long)file < PAGE_OFFSET || __get_user(c, file))
 		file = "<bad filename>";
 
@@ -294,6 +295,9 @@ bug:
 	printk("Kernel BUG\n");
 }
 
+/* This is gone through when something in the kernel
+ * has done something bad and is about to be terminated.
+*/
 void die(const char * str, struct pt_regs * regs, long err)
 {
 	static struct {
@@ -341,6 +345,10 @@ void die(const char * str, struct pt_regs * regs, long err)
 	bust_spinlocks(0);
 	die.lock_owner = -1;
 	spin_unlock_irq(&die.lock);
+
+	if (kexec_should_crash(current))
+		crash_kexec(regs);
+
 	if (in_interrupt())
 		panic("Fatal exception in interrupt");
 
@@ -361,6 +369,10 @@ static inline void die_if_kernel(const char * str, struct pt_regs * regs, long e
 static void do_trap(int trapnr, int signr, char *str, int vm86,
 			   struct pt_regs * regs, long error_code, siginfo_t *info)
 {
+	struct task_struct *tsk = current;
+	tsk->thread.error_code = error_code;
+	tsk->thread.trap_no = trapnr;
+
 	if (regs->eflags & VM_MASK) {
 		if (vm86)
 			goto vm86_trap;
@@ -371,9 +383,6 @@ static void do_trap(int trapnr, int signr, char *str, int vm86,
 		goto kernel_trap;
 
 	trap_signal: {
-		struct task_struct *tsk = current;
-		tsk->thread.error_code = error_code;
-		tsk->thread.trap_no = trapnr;
 		if (info)
 			force_sig_info(signr, info, tsk);
 		else
@@ -486,6 +495,9 @@ fastcall void do_general_protection(struct pt_regs * regs, long error_code)
 	}
 	put_cpu();
 
+	current->thread.error_code = error_code;
+	current->thread.trap_no = 13;
+
 	if (regs->eflags & VM_MASK)
 		goto gp_in_vm86;
 
@@ -570,6 +582,15 @@ void die_nmi (struct pt_regs *regs, const char *msg)
 	console_silent();
 	spin_unlock(&nmi_print_lock);
 	bust_spinlocks(0);
+
+	/* If we are in kernel we are probably nested up pretty bad
+	 * and might aswell get out now while we still can.
+	*/
+	if (!user_mode(regs)) {
+		current->thread.trap_no = 2;
+		crash_kexec(regs);
+	}
+
 	do_exit(SIGSEGV);
 }
 
@@ -625,6 +646,14 @@ fastcall void do_nmi(struct pt_regs * regs, long error_code)
 	nmi_enter();
 
 	cpu = smp_processor_id();
+
+#ifdef CONFIG_HOTPLUG_CPU
+	if (!cpu_online(cpu)) {
+		nmi_exit();
+		return;
+	}
+#endif
+
 	++nmi_count(cpu);
 
 	if (!nmi_callback(regs, cpu))
@@ -872,9 +901,9 @@ fastcall void do_simd_coprocessor_error(struct pt_regs * regs,
 					  error_code);
 			return;
 		}
-		die_if_kernel("cache flush denied", regs, error_code);
 		current->thread.trap_no = 19;
 		current->thread.error_code = error_code;
+		die_if_kernel("cache flush denied", regs, error_code);
 		force_sig(SIGSEGV, current);
 	}
 }

arch/i386/kernel/vmlinux.lds.S

@@ -2,20 +2,23 @@
  * Written by Martin Mares <mj@atrey.karlin.mff.cuni.cz>;
  */
 
+#define LOAD_OFFSET __PAGE_OFFSET
+
 #include <asm-generic/vmlinux.lds.h>
 #include <asm/thread_info.h>
 #include <asm/page.h>
 
 OUTPUT_FORMAT("elf32-i386", "elf32-i386", "elf32-i386")
 OUTPUT_ARCH(i386)
-ENTRY(startup_32)
+ENTRY(phys_startup_32)
 jiffies = jiffies_64;
 SECTIONS
 {
-  . = __PAGE_OFFSET + 0x100000;
+  . = __KERNEL_START;
+  phys_startup_32 = startup_32 - LOAD_OFFSET;
   /* read-only */
   _text = .;			/* Text and read-only data */
-  .text : {
+  .text : AT(ADDR(.text) - LOAD_OFFSET) {
 	*(.text)
 	SCHED_TEXT
 	LOCK_TEXT
@@ -27,49 +30,55 @@ SECTIONS
 
   . = ALIGN(16);		/* Exception table */
   __start___ex_table = .;
-  __ex_table : { *(__ex_table) }
+  __ex_table : AT(ADDR(__ex_table) - LOAD_OFFSET) { *(__ex_table) }
   __stop___ex_table = .;
 
   RODATA
 
   /* writeable */
-  .data : {			/* Data */
+  .data : AT(ADDR(.data) - LOAD_OFFSET) {	/* Data */
 	*(.data)
 	CONSTRUCTORS
 	}
 
   . = ALIGN(4096);
   __nosave_begin = .;
-  .data_nosave : { *(.data.nosave) }
+  .data_nosave : AT(ADDR(.data_nosave) - LOAD_OFFSET) { *(.data.nosave) }
   . = ALIGN(4096);
   __nosave_end = .;
 
   . = ALIGN(4096);
-  .data.page_aligned : { *(.data.idt) }
+  .data.page_aligned : AT(ADDR(.data.page_aligned) - LOAD_OFFSET) {
+	*(.data.idt)
+  }
 
   . = ALIGN(32);
-  .data.cacheline_aligned : { *(.data.cacheline_aligned) }
+  .data.cacheline_aligned : AT(ADDR(.data.cacheline_aligned) - LOAD_OFFSET) {
+	*(.data.cacheline_aligned)
+  }
 
   _edata = .;			/* End of data section */
 
   . = ALIGN(THREAD_SIZE);	/* init_task */
-  .data.init_task : { *(.data.init_task) }
+  .data.init_task : AT(ADDR(.data.init_task) - LOAD_OFFSET) {
+	*(.data.init_task)
+  }
 
   /* will be freed after init */
   . = ALIGN(4096);		/* Init code and data */
   __init_begin = .;
-  .init.text : { 
+  .init.text : AT(ADDR(.init.text) - LOAD_OFFSET) {
 	_sinittext = .;
 	*(.init.text)
 	_einittext = .;
   }
-  .init.data : { *(.init.data) }
+  .init.data : AT(ADDR(.init.data) - LOAD_OFFSET) { *(.init.data) }
   . = ALIGN(16);
   __setup_start = .;
-  .init.setup : { *(.init.setup) }
+  .init.setup : AT(ADDR(.init.setup) - LOAD_OFFSET) { *(.init.setup) }
   __setup_end = .;
   __initcall_start = .;
-  .initcall.init : {
+  .initcall.init : AT(ADDR(.initcall.init) - LOAD_OFFSET) {
 	*(.initcall1.init) 
 	*(.initcall2.init) 
 	*(.initcall3.init) 
@@ -80,33 +89,41 @@ SECTIONS
   }
   __initcall_end = .;
   __con_initcall_start = .;
-  .con_initcall.init : { *(.con_initcall.init) }
+  .con_initcall.init : AT(ADDR(.con_initcall.init) - LOAD_OFFSET) {
+	*(.con_initcall.init)
+  }
   __con_initcall_end = .;
   SECURITY_INIT
   . = ALIGN(4);
   __alt_instructions = .;
-  .altinstructions : { *(.altinstructions) } 
+  .altinstructions : AT(ADDR(.altinstructions) - LOAD_OFFSET) {
+	*(.altinstructions)
+  }
   __alt_instructions_end = .; 
- .altinstr_replacement : { *(.altinstr_replacement) } 
+  .altinstr_replacement : AT(ADDR(.altinstr_replacement) - LOAD_OFFSET) {
+	*(.altinstr_replacement)
+  }
   /* .exit.text is discard at runtime, not link time, to deal with references
      from .altinstructions and .eh_frame */
-  .exit.text : { *(.exit.text) }
-  .exit.data : { *(.exit.data) }
+  .exit.text : AT(ADDR(.exit.text) - LOAD_OFFSET) { *(.exit.text) }
+  .exit.data : AT(ADDR(.exit.data) - LOAD_OFFSET) { *(.exit.data) }
   . = ALIGN(4096);
   __initramfs_start = .;
-  .init.ramfs : { *(.init.ramfs) }
+  .init.ramfs : AT(ADDR(.init.ramfs) - LOAD_OFFSET) { *(.init.ramfs) }
   __initramfs_end = .;
   . = ALIGN(32);
   __per_cpu_start = .;
-  .data.percpu  : { *(.data.percpu) }
+  .data.percpu  : AT(ADDR(.data.percpu) - LOAD_OFFSET) { *(.data.percpu) }
   __per_cpu_end = .;
   . = ALIGN(4096);
   __init_end = .;
   /* freed after init ends here */
 	
   __bss_start = .;		/* BSS */
-  .bss : {
+  .bss.page_aligned : AT(ADDR(.bss.page_aligned) - LOAD_OFFSET) {
 	*(.bss.page_aligned)
+  }
+  .bss : AT(ADDR(.bss) - LOAD_OFFSET) {
 	*(.bss)
   }
   . = ALIGN(4);

arch/i386/mach-default/setup.c

@@ -10,6 +10,14 @@
 #include <asm/acpi.h>
 #include <asm/arch_hooks.h>
 
+#ifdef CONFIG_HOTPLUG_CPU
+#define DEFAULT_SEND_IPI	(1)
+#else
+#define DEFAULT_SEND_IPI	(0)
+#endif
+
+int no_broadcast=DEFAULT_SEND_IPI;
+
 /**
  * pre_intr_init_hook - initialisation prior to setting up interrupt vectors
  *
@@ -104,3 +112,22 @@ void __init mca_nmi_hook(void)
 	printk("NMI generated from unknown source!\n");
 }
 #endif
+
+static __init int no_ipi_broadcast(char *str)
+{
+	get_option(&str, &no_broadcast);
+	printk ("Using %s mode\n", no_broadcast ? "No IPI Broadcast" :
+											"IPI Broadcast");
+	return 1;
+}
+
+__setup("no_ipi_broadcast", no_ipi_broadcast);
+
+static int __init print_ipi_mode(void)
+{
+	printk ("Using IPI %s mode\n", no_broadcast ? "No-Shortcut" :
+											"Shortcut");
+	return 0;
+}
+
+late_initcall(print_ipi_mode);

arch/i386/mach-default/topology.c

@@ -73,12 +73,11 @@ static int __init topology_init(void)
 {
 	int i;
 
-	for (i = 0; i < MAX_NUMNODES; i++) {
-		if (node_online(i))
-			arch_register_node(i);
-	}
-	for (i = 0; i < NR_CPUS; i++)
-		if (cpu_possible(i)) arch_register_cpu(i);
+	for_each_online_node(i)
+		arch_register_node(i);
+
+	for_each_cpu(i)
+		arch_register_cpu(i);
 	return 0;
 }
 
@@ -88,8 +87,8 @@ static int __init topology_init(void)
 {
 	int i;
 
-	for (i = 0; i < NR_CPUS; i++)
-		if (cpu_possible(i)) arch_register_cpu(i);
+	for_each_cpu(i)
+		arch_register_cpu(i);
 	return 0;
 }
 

arch/i386/mach-visws/mpparse.c

@@ -23,7 +23,6 @@ unsigned long mp_lapic_addr;
 
 /* Processor that is doing the boot up */
 unsigned int boot_cpu_physical_apicid = -1U;
-unsigned int boot_cpu_logical_apicid = -1U;
 
 /* Bitmask of physically existing CPUs */
 physid_mask_t phys_cpu_present_map;
@@ -52,10 +51,8 @@ static void __init MP_processor_info (struct mpc_config_processor *m)
 		(m->mpc_cpufeature & CPU_MODEL_MASK) >> 4,
 		m->mpc_apicver);
 
-	if (m->mpc_cpuflag & CPU_BOOTPROCESSOR) {
+	if (m->mpc_cpuflag & CPU_BOOTPROCESSOR)
 		boot_cpu_physical_apicid = m->mpc_apicid;
-		boot_cpu_logical_apicid = logical_apicid;
-	}
 
 	ver = m->mpc_apicver;
 	if ((ver >= 0x14 && m->mpc_apicid >= 0xff) || m->mpc_apicid >= 0xf) {

arch/i386/mm/discontig.c

@@ -30,6 +30,8 @@
 #include <linux/initrd.h>
 #include <linux/nodemask.h>
 #include <linux/module.h>
+#include <linux/kexec.h>
+
 #include <asm/e820.h>
 #include <asm/setup.h>
 #include <asm/mmzone.h>

arch/i386/mm/fault.c

@@ -146,7 +146,7 @@ static int __is_prefetch(struct pt_regs *regs, unsigned long addr)
 
 		if (instr > limit)
 			break;
-		if (__get_user(opcode, (unsigned char *) instr))
+		if (__get_user(opcode, (unsigned char __user *) instr))
 			break; 
 
 		instr_hi = opcode & 0xf0; 
@@ -173,7 +173,7 @@ static int __is_prefetch(struct pt_regs *regs, unsigned long addr)
 			scan_more = 0;
 			if (instr > limit)
 				break;
-			if (__get_user(opcode, (unsigned char *) instr)) 
+			if (__get_user(opcode, (unsigned char __user *) instr))
 				break;
 			prefetch = (instr_lo == 0xF) &&
 				(opcode == 0x0D || opcode == 0x18);
@@ -463,6 +463,9 @@ no_context:
 		printk(KERN_ALERT "*pte = %08lx\n", page);
 	}
 #endif
+	tsk->thread.cr2 = address;
+	tsk->thread.trap_no = 14;
+	tsk->thread.error_code = error_code;
 	die("Oops", regs, error_code);
 	bust_spinlocks(0);
 	do_exit(SIGKILL);

arch/i386/mm/highmem.c

@@ -75,6 +75,24 @@ void kunmap_atomic(void *kvaddr, enum km_type type)
 	preempt_check_resched();
 }
 
+/* This is the same as kmap_atomic() but can map memory that doesn't
+ * have a struct page associated with it.
+ */
+void *kmap_atomic_pfn(unsigned long pfn, enum km_type type)
+{
+	enum fixed_addresses idx;
+	unsigned long vaddr;
+
+	inc_preempt_count();
+
+	idx = type + KM_TYPE_NR*smp_processor_id();
+	vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx);
+	set_pte(kmap_pte-idx, pfn_pte(pfn, kmap_prot));
+	__flush_tlb_one(vaddr);
+
+	return (void*) vaddr;
+}
+
 struct page *kmap_atomic_to_page(void *ptr)
 {
 	unsigned long idx, vaddr = (unsigned long)ptr;

arch/i386/mm/init.c

@@ -352,7 +352,7 @@ static void __init pagetable_init (void)
 #endif
 }
 
-#if defined(CONFIG_PM_DISK) || defined(CONFIG_SOFTWARE_SUSPEND)
+#ifdef CONFIG_SOFTWARE_SUSPEND
 /*
  * Swap suspend & friends need this for resume because things like the intel-agp
  * driver might have split up a kernel 4MB mapping.

arch/i386/mm/ioremap.c

@@ -243,7 +243,7 @@ void iounmap(volatile void __iomem *addr)
 	write_lock(&vmlist_lock);
 	p = __remove_vm_area((void *) (PAGE_MASK & (unsigned long __force) addr));
 	if (!p) { 
-		printk("iounmap: bad address %p\n", addr);
+		printk(KERN_WARNING "iounmap: bad address %p\n", addr);
 		goto out_unlock;
 	}
 

arch/i386/mm/pgtable.c

@@ -32,9 +32,9 @@ void show_mem(void)
 	unsigned long i;
 	struct page_state ps;
 
-	printk("Mem-info:\n");
+	printk(KERN_INFO "Mem-info:\n");
 	show_free_areas();
-	printk("Free swap:       %6ldkB\n", nr_swap_pages<<(PAGE_SHIFT-10));
+	printk(KERN_INFO "Free swap:       %6ldkB\n", nr_swap_pages<<(PAGE_SHIFT-10));
 	for_each_pgdat(pgdat) {
 		for (i = 0; i < pgdat->node_spanned_pages; ++i) {
 			page = pgdat_page_nr(pgdat, i);
@@ -49,18 +49,18 @@ void show_mem(void)
 				shared += page_count(page) - 1;
 		}
 	}
-	printk("%d pages of RAM\n", total);
-	printk("%d pages of HIGHMEM\n",highmem);
-	printk("%d reserved pages\n",reserved);
-	printk("%d pages shared\n",shared);
-	printk("%d pages swap cached\n",cached);
+	printk(KERN_INFO "%d pages of RAM\n", total);
+	printk(KERN_INFO "%d pages of HIGHMEM\n", highmem);
+	printk(KERN_INFO "%d reserved pages\n", reserved);
+	printk(KERN_INFO "%d pages shared\n", shared);
+	printk(KERN_INFO "%d pages swap cached\n", cached);
 
 	get_page_state(&ps);
-	printk("%lu pages dirty\n", ps.nr_dirty);
-	printk("%lu pages writeback\n", ps.nr_writeback);
-	printk("%lu pages mapped\n", ps.nr_mapped);
-	printk("%lu pages slab\n", ps.nr_slab);
-	printk("%lu pages pagetables\n", ps.nr_page_table_pages);
+	printk(KERN_INFO "%lu pages dirty\n", ps.nr_dirty);
+	printk(KERN_INFO "%lu pages writeback\n", ps.nr_writeback);
+	printk(KERN_INFO "%lu pages mapped\n", ps.nr_mapped);
+	printk(KERN_INFO "%lu pages slab\n", ps.nr_slab);
+	printk(KERN_INFO "%lu pages pagetables\n", ps.nr_page_table_pages);
 }
 
 /*
@@ -113,16 +113,16 @@ void set_pmd_pfn(unsigned long vaddr, unsigned long pfn, pgprot_t flags)
 	pmd_t *pmd;
 
 	if (vaddr & (PMD_SIZE-1)) {		/* vaddr is misaligned */
-		printk ("set_pmd_pfn: vaddr misaligned\n");
+		printk(KERN_WARNING "set_pmd_pfn: vaddr misaligned\n");
 		return; /* BUG(); */
 	}
 	if (pfn & (PTRS_PER_PTE-1)) {		/* pfn is misaligned */
-		printk ("set_pmd_pfn: pfn misaligned\n");
+		printk(KERN_WARNING "set_pmd_pfn: pfn misaligned\n");
 		return; /* BUG(); */
 	}
 	pgd = swapper_pg_dir + pgd_index(vaddr);
 	if (pgd_none(*pgd)) {
-		printk ("set_pmd_pfn: pgd_none\n");
+		printk(KERN_WARNING "set_pmd_pfn: pgd_none\n");
 		return; /* BUG(); */
 	}
 	pud = pud_offset(pgd, vaddr);

arch/i386/power/cpu.c

@@ -22,9 +22,11 @@
 #include <linux/device.h>
 #include <linux/suspend.h>
 #include <linux/acpi.h>
+
 #include <asm/uaccess.h>
 #include <asm/acpi.h>
 #include <asm/tlbflush.h>
+#include <asm/processor.h>
 
 static struct saved_context saved_context;
 
@@ -33,8 +35,6 @@ unsigned long saved_context_esp, saved_context_ebp;
 unsigned long saved_context_esi, saved_context_edi;
 unsigned long saved_context_eflags;
 
-extern void enable_sep_cpu(void *);
-
 void __save_processor_state(struct saved_context *ctxt)
 {
 	kernel_fpu_begin();
@@ -44,7 +44,6 @@ void __save_processor_state(struct saved_context *ctxt)
 	 */
 	asm volatile ("sgdt %0" : "=m" (ctxt->gdt_limit));
 	asm volatile ("sidt %0" : "=m" (ctxt->idt_limit));
-	asm volatile ("sldt %0" : "=m" (ctxt->ldt));
 	asm volatile ("str %0"  : "=m" (ctxt->tr));
 
 	/*
@@ -107,7 +106,6 @@ static void fix_processor_context(void)
 
 void __restore_processor_state(struct saved_context *ctxt)
 {
-
 	/*
 	 * control registers
 	 */
@@ -116,6 +114,13 @@ void __restore_processor_state(struct saved_context *ctxt)
 	asm volatile ("movl %0, %%cr2" :: "r" (ctxt->cr2));
 	asm volatile ("movl %0, %%cr0" :: "r" (ctxt->cr0));
 
+	/*
+	 * now restore the descriptor tables to their proper values
+	 * ltr is done i fix_processor_context().
+	 */
+	asm volatile ("lgdt %0" :: "m" (ctxt->gdt_limit));
+	asm volatile ("lidt %0" :: "m" (ctxt->idt_limit));
+
 	/*
 	 * segment registers
 	 */
@@ -124,19 +129,11 @@ void __restore_processor_state(struct saved_context *ctxt)
 	asm volatile ("movw %0, %%gs" :: "r" (ctxt->gs));
 	asm volatile ("movw %0, %%ss" :: "r" (ctxt->ss));
 
-	/*
-	 * now restore the descriptor tables to their proper values
-	 * ltr is done i fix_processor_context().
-	 */
-	asm volatile ("lgdt %0" :: "m" (ctxt->gdt_limit));
-	asm volatile ("lidt %0" :: "m" (ctxt->idt_limit));
-	asm volatile ("lldt %0" :: "m" (ctxt->ldt));
-
 	/*
 	 * sysenter MSRs
 	 */
 	if (boot_cpu_has(X86_FEATURE_SEP))
-		enable_sep_cpu(NULL);
+		enable_sep_cpu();
 
 	fix_processor_context();
 	do_fpu_end();

arch/ia64/kernel/domain.c

@@ -14,7 +14,7 @@
 #include <linux/topology.h>
 #include <linux/nodemask.h>
 
-#define SD_NODES_PER_DOMAIN 6
+#define SD_NODES_PER_DOMAIN 16
 
 #ifdef CONFIG_NUMA
 /**
@@ -27,7 +27,7 @@
  *
  * Should use nodemask_t.
  */
-static int __devinit find_next_best_node(int node, unsigned long *used_nodes)
+static int find_next_best_node(int node, unsigned long *used_nodes)
 {
 	int i, n, val, min_val, best_node = 0;
 
@@ -66,7 +66,7 @@ static int __devinit find_next_best_node(int node, unsigned long *used_nodes)
  * should be one that prevents unnecessary balancing, but also spreads tasks
  * out optimally.
  */
-static cpumask_t __devinit sched_domain_node_span(int node)
+static cpumask_t sched_domain_node_span(int node)
 {
 	int i;
 	cpumask_t span, nodemask;
@@ -96,7 +96,7 @@ static cpumask_t __devinit sched_domain_node_span(int node)
 #ifdef CONFIG_SCHED_SMT
 static DEFINE_PER_CPU(struct sched_domain, cpu_domains);
 static struct sched_group sched_group_cpus[NR_CPUS];
-static int __devinit cpu_to_cpu_group(int cpu)
+static int cpu_to_cpu_group(int cpu)
 {
 	return cpu;
 }
@@ -104,7 +104,7 @@ static int __devinit cpu_to_cpu_group(int cpu)
 
 static DEFINE_PER_CPU(struct sched_domain, phys_domains);
 static struct sched_group sched_group_phys[NR_CPUS];
-static int __devinit cpu_to_phys_group(int cpu)
+static int cpu_to_phys_group(int cpu)
 {
 #ifdef CONFIG_SCHED_SMT
 	return first_cpu(cpu_sibling_map[cpu]);
@@ -125,44 +125,36 @@ static struct sched_group *sched_group_nodes[MAX_NUMNODES];
 static DEFINE_PER_CPU(struct sched_domain, allnodes_domains);
 static struct sched_group sched_group_allnodes[MAX_NUMNODES];
 
-static int __devinit cpu_to_allnodes_group(int cpu)
+static int cpu_to_allnodes_group(int cpu)
 {
 	return cpu_to_node(cpu);
 }
 #endif
 
 /*
- * Set up scheduler domains and groups.  Callers must hold the hotplug lock.
+ * Build sched domains for a given set of cpus and attach the sched domains
+ * to the individual cpus
  */
-void __devinit arch_init_sched_domains(void)
+void build_sched_domains(const cpumask_t *cpu_map)
 {
 	int i;
-	cpumask_t cpu_default_map;
 
 	/*
-	 * Setup mask for cpus without special case scheduling requirements.
-	 * For now this just excludes isolated cpus, but could be used to
-	 * exclude other special cases in the future.
+	 * Set up domains for cpus specified by the cpu_map.
 	 */
-	cpus_complement(cpu_default_map, cpu_isolated_map);
-	cpus_and(cpu_default_map, cpu_default_map, cpu_online_map);
-
-	/*
-	 * Set up domains. Isolated domains just stay on the dummy domain.
-	 */
-	for_each_cpu_mask(i, cpu_default_map) {
+	for_each_cpu_mask(i, *cpu_map) {
 		int group;
 		struct sched_domain *sd = NULL, *p;
 		cpumask_t nodemask = node_to_cpumask(cpu_to_node(i));
 
-		cpus_and(nodemask, nodemask, cpu_default_map);
+		cpus_and(nodemask, nodemask, *cpu_map);
 
 #ifdef CONFIG_NUMA
 		if (num_online_cpus()
 				> SD_NODES_PER_DOMAIN*cpus_weight(nodemask)) {
 			sd = &per_cpu(allnodes_domains, i);
 			*sd = SD_ALLNODES_INIT;
-			sd->span = cpu_default_map;
+			sd->span = *cpu_map;
 			group = cpu_to_allnodes_group(i);
 			sd->groups = &sched_group_allnodes[group];
 			p = sd;
@@ -173,7 +165,7 @@ void __devinit arch_init_sched_domains(void)
 		*sd = SD_NODE_INIT;
 		sd->span = sched_domain_node_span(cpu_to_node(i));
 		sd->parent = p;
-		cpus_and(sd->span, sd->span, cpu_default_map);
+		cpus_and(sd->span, sd->span, *cpu_map);
 #endif
 
 		p = sd;
@@ -190,7 +182,7 @@ void __devinit arch_init_sched_domains(void)
 		group = cpu_to_cpu_group(i);
 		*sd = SD_SIBLING_INIT;
 		sd->span = cpu_sibling_map[i];
-		cpus_and(sd->span, sd->span, cpu_default_map);
+		cpus_and(sd->span, sd->span, *cpu_map);
 		sd->parent = p;
 		sd->groups = &sched_group_cpus[group];
 #endif
@@ -198,9 +190,9 @@ void __devinit arch_init_sched_domains(void)
 
 #ifdef CONFIG_SCHED_SMT
 	/* Set up CPU (sibling) groups */
-	for_each_cpu_mask(i, cpu_default_map) {
+	for_each_cpu_mask(i, *cpu_map) {
 		cpumask_t this_sibling_map = cpu_sibling_map[i];
-		cpus_and(this_sibling_map, this_sibling_map, cpu_default_map);
+		cpus_and(this_sibling_map, this_sibling_map, *cpu_map);
 		if (i != first_cpu(this_sibling_map))
 			continue;
 
@@ -213,7 +205,7 @@ void __devinit arch_init_sched_domains(void)
 	for (i = 0; i < MAX_NUMNODES; i++) {
 		cpumask_t nodemask = node_to_cpumask(i);
 
-		cpus_and(nodemask, nodemask, cpu_default_map);
+		cpus_and(nodemask, nodemask, *cpu_map);
 		if (cpus_empty(nodemask))
 			continue;
 
@@ -222,7 +214,7 @@ void __devinit arch_init_sched_domains(void)
 	}
 
 #ifdef CONFIG_NUMA
-	init_sched_build_groups(sched_group_allnodes, cpu_default_map,
+	init_sched_build_groups(sched_group_allnodes, *cpu_map,
 				&cpu_to_allnodes_group);
 
 	for (i = 0; i < MAX_NUMNODES; i++) {
@@ -233,12 +225,12 @@ void __devinit arch_init_sched_domains(void)
 		cpumask_t covered = CPU_MASK_NONE;
 		int j;
 
-		cpus_and(nodemask, nodemask, cpu_default_map);
+		cpus_and(nodemask, nodemask, *cpu_map);
 		if (cpus_empty(nodemask))
 			continue;
 
 		domainspan = sched_domain_node_span(i);
-		cpus_and(domainspan, domainspan, cpu_default_map);
+		cpus_and(domainspan, domainspan, *cpu_map);
 
 		sg = kmalloc(sizeof(struct sched_group), GFP_KERNEL);
 		sched_group_nodes[i] = sg;
@@ -266,7 +258,7 @@ void __devinit arch_init_sched_domains(void)
 			int n = (i + j) % MAX_NUMNODES;
 
 			cpus_complement(notcovered, covered);
-			cpus_and(tmp, notcovered, cpu_default_map);
+			cpus_and(tmp, notcovered, *cpu_map);
 			cpus_and(tmp, tmp, domainspan);
 			if (cpus_empty(tmp))
 				break;
@@ -293,7 +285,7 @@ void __devinit arch_init_sched_domains(void)
 #endif
 
 	/* Calculate CPU power for physical packages and nodes */
-	for_each_cpu_mask(i, cpu_default_map) {
+	for_each_cpu_mask(i, *cpu_map) {
 		int power;
 		struct sched_domain *sd;
 #ifdef CONFIG_SCHED_SMT
@@ -359,13 +351,35 @@ next_sg:
 		cpu_attach_domain(sd, i);
 	}
 }
+/*
+ * Set up scheduler domains and groups.  Callers must hold the hotplug lock.
+ */
+void arch_init_sched_domains(const cpumask_t *cpu_map)
+{
+	cpumask_t cpu_default_map;
+
+	/*
+	 * Setup mask for cpus without special case scheduling requirements.
+	 * For now this just excludes isolated cpus, but could be used to
+	 * exclude other special cases in the future.
+	 */
+	cpus_andnot(cpu_default_map, *cpu_map, cpu_isolated_map);
+
+	build_sched_domains(&cpu_default_map);
+}
 
-void __devinit arch_destroy_sched_domains(void)
+void arch_destroy_sched_domains(const cpumask_t *cpu_map)
 {
 #ifdef CONFIG_NUMA
 	int i;
 	for (i = 0; i < MAX_NUMNODES; i++) {
+		cpumask_t nodemask = node_to_cpumask(i);
 		struct sched_group *oldsg, *sg = sched_group_nodes[i];
+
+		cpus_and(nodemask, nodemask, *cpu_map);
+		if (cpus_empty(nodemask))
+			continue;
+
 		if (sg == NULL)
 			continue;
 		sg = sg->next;

arch/ia64/kernel/smpboot.c

@@ -346,6 +346,7 @@ smp_callin (void)
 	lock_ipi_calllock();
 	cpu_set(cpuid, cpu_online_map);
 	unlock_ipi_calllock();
+	per_cpu(cpu_state, cpuid) = CPU_ONLINE;
 
 	smp_setup_percpu_timer();
 
@@ -611,6 +612,7 @@ void __devinit smp_prepare_boot_cpu(void)
 {
 	cpu_set(smp_processor_id(), cpu_online_map);
 	cpu_set(smp_processor_id(), cpu_callin_map);
+	per_cpu(cpu_state, smp_processor_id()) = CPU_ONLINE;
 }
 
 /*
@@ -688,6 +690,7 @@ int __cpu_disable(void)
 		return -EBUSY;
 
 	remove_siblinginfo(cpu);
+	cpu_clear(cpu, cpu_online_map);
 	fixup_irqs();
 	local_flush_tlb_all();
 	cpu_clear(cpu, cpu_callin_map);
@@ -774,6 +777,7 @@ __cpu_up (unsigned int cpu)
 	if (cpu_isset(cpu, cpu_callin_map))
 		return -EINVAL;
 
+	per_cpu(cpu_state, cpu) = CPU_UP_PREPARE;
 	/* Processor goes to start_secondary(), sets online flag */
 	ret = do_boot_cpu(sapicid, cpu);
 	if (ret < 0)

arch/ia64/sn/kernel/xpc.h

@@ -87,7 +87,7 @@ struct xpc_rsvd_page {
 	u8 partid;		/* partition ID from SAL */
 	u8 version;
 	u8 pad[6];		/* pad to u64 align */
-	u64 vars_pa;
+	volatile u64 vars_pa;
 	u64 part_nasids[XP_NASID_MASK_WORDS] ____cacheline_aligned;
 	u64 mach_nasids[XP_NASID_MASK_WORDS] ____cacheline_aligned;
 };
@@ -138,7 +138,7 @@ struct xpc_vars {
  * occupies half a cacheline.
  */
 struct xpc_vars_part {
-	u64 magic;
+	volatile u64 magic;
 
 	u64 openclose_args_pa;	/* physical address of open and close args */
 	u64 GPs_pa;		/* physical address of Get/Put values */
@@ -185,8 +185,8 @@ struct xpc_vars_part {
  * Define a Get/Put value pair (pointers) used with a message queue.
  */
 struct xpc_gp {
-	s64 get;	/* Get value */
-	s64 put;	/* Put value */
+	volatile s64 get;	/* Get value */
+	volatile s64 put;	/* Put value */
 };
 
 #define XPC_GP_SIZE \
@@ -231,7 +231,7 @@ struct xpc_openclose_args {
  */
 struct xpc_notify {
 	struct semaphore sema;		/* notify semaphore */
-	u8 type;			/* type of notification */
+	volatile u8 type;			/* type of notification */
 
 	/* the following two fields are only used if type == XPC_N_CALL */
 	xpc_notify_func func;		/* user's notify function */
@@ -439,7 +439,7 @@ struct xpc_partition {
 
 	/* XPC infrastructure referencing and teardown control */
 
-	u8 setup_state;			/* infrastructure setup state */
+	volatile u8 setup_state;			/* infrastructure setup state */
 	wait_queue_head_t teardown_wq;	/* kthread waiting to teardown infra */
 	atomic_t references;		/* #of references to infrastructure */