brcmfmac: allow stopping netif queue for different reasons

Currently, the netif queue is only stopped when the bus interface is
giving a push back. This will change soon so prepare the driver by
adding a stop reason and stop/resume the queue accordingly.

Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Reviewed-by: Piotr Haber <phaber@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

drivers/net/wireless/brcm80211/brcmfmac/dhd.h

@@ -554,6 +554,19 @@ struct brcmf_if_event {
 struct brcmf_cfg80211_vif;
 struct brcmf_fws_mac_descriptor;
 
+/**
+ * enum brcmf_netif_stop_reason - reason for stopping netif queue.
+ *
+ * @BRCMF_NETIF_STOP_REASON_FWS_FC:
+ *	netif stopped due to firmware signalling flow control.
+ * @BRCMF_NETIF_STOP_REASON_BLOCK_BUS:
+ *	netif stopped due to bus blocking.
+ */
+enum brcmf_netif_stop_reason {
+	BRCMF_NETIF_STOP_REASON_FWS_FC = 1,
+	BRCMF_NETIF_STOP_REASON_BLOCK_BUS = 2
+};
+
 /**
  * struct brcmf_if - interface control information.
  *
@@ -567,6 +580,7 @@ struct brcmf_fws_mac_descriptor;
  * @ifidx: interface index in device firmware.
  * @bssidx: index of bss associated with this interface.
  * @mac_addr: assigned mac address.
+ * @netif_stop: bitmap indicates reason why netif queues are stopped.
  * @pend_8021x_cnt: tracks outstanding number of 802.1x frames.
  * @pend_8021x_wait: used for signalling change in count.
  */
@@ -581,6 +595,7 @@ struct brcmf_if {
 	int ifidx;
 	s32 bssidx;
 	u8 mac_addr[ETH_ALEN];
+	u8 netif_stop;
 	atomic_t pend_8021x_cnt;
 	wait_queue_head_t pend_8021x_wait;
 };
@@ -605,6 +620,8 @@ extern int brcmf_net_attach(struct brcmf_if *ifp, bool rtnl_locked);
 extern struct brcmf_if *brcmf_add_if(struct brcmf_pub *drvr, s32 bssidx,
 				     s32 ifidx, char *name, u8 *mac_addr);
 extern void brcmf_del_if(struct brcmf_pub *drvr, s32 bssidx);
+void brcmf_txflowblock_if(struct brcmf_if *ifp,
+			  enum brcmf_netif_stop_reason reason, bool state);
 extern u32 brcmf_get_chip_info(struct brcmf_if *ifp);
 
 #endif				/* _BRCMF_H_ */

drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c

@@ -248,9 +248,27 @@ done:
 	return NETDEV_TX_OK;
 }
 
+void brcmf_txflowblock_if(struct brcmf_if *ifp,
+			  enum brcmf_netif_stop_reason reason, bool state)
+{
+	if (!ifp)
+		return;
+
+	brcmf_dbg(TRACE, "enter: idx=%d stop=0x%X reason=%d state=%d\n",
+		  ifp->bssidx, ifp->netif_stop, reason, state);
+	if (state) {
+		if (!ifp->netif_stop)
+			netif_stop_queue(ifp->ndev);
+		ifp->netif_stop |= reason;
+	} else {
+		ifp->netif_stop &= ~reason;
+		if (!ifp->netif_stop)
+			netif_wake_queue(ifp->ndev);
+	}
+}
+
 void brcmf_txflowblock(struct device *dev, bool state)
 {
-	struct net_device *ndev;
 	struct brcmf_bus *bus_if = dev_get_drvdata(dev);
 	struct brcmf_pub *drvr = bus_if->drvr;
 	int i;
@@ -258,13 +276,8 @@ void brcmf_txflowblock(struct device *dev, bool state)
 	brcmf_dbg(TRACE, "Enter\n");
 
 	for (i = 0; i < BRCMF_MAX_IFS; i++)
-		if (drvr->iflist[i]) {
-			ndev = drvr->iflist[i]->ndev;
-			if (state)
-				netif_stop_queue(ndev);
-			else
-				netif_wake_queue(ndev);
-		}
+		brcmf_txflowblock_if(drvr->iflist[i],
+				     BRCMF_NETIF_STOP_REASON_BLOCK_BUS, state);
 }
 
 void brcmf_rx_frames(struct device *dev, struct sk_buff_head *skb_list)