wimax/i2400m: Fix USB timeout specifications (to ms from HZ)

The USB code was incorrectly specifiying timeouts to be in jiffies vs
msecs. On top of that, lower it to 200ms, as 1s is really too long
(doesn't allow the watchdog to trip a reset if the device timesout too
often).

Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com>

drivers/net/wimax/i2400m/usb-fw.c

@@ -102,7 +102,7 @@ ssize_t i2400mu_tx_bulk_out(struct i2400mu *i2400mu, void *buf, size_t buf_size)
 	epd = usb_get_epd(i2400mu->usb_iface, i2400mu->endpoint_cfg.bulk_out);
 	pipe = usb_sndbulkpipe(i2400mu->usb_dev, epd->bEndpointAddress);
 retry:
-	result = usb_bulk_msg(i2400mu->usb_dev, pipe, buf, buf_size, &len, HZ);
+	result = usb_bulk_msg(i2400mu->usb_dev, pipe, buf, buf_size, &len, 200);
 	switch (result) {
 	case 0:
 		if (len != buf_size) {

drivers/net/wimax/i2400m/usb-rx.c

@@ -214,7 +214,7 @@ retry:
 	}
 	result = usb_bulk_msg(
 		i2400mu->usb_dev, usb_pipe, rx_skb->data + rx_skb->len,
-		rx_size, &read_size, HZ);
+		rx_size, &read_size, 200);
 	usb_mark_last_busy(i2400mu->usb_dev);
 	switch (result) {
 	case 0:

drivers/net/wimax/i2400m/usb-tx.c

@@ -105,7 +105,7 @@ int i2400mu_tx(struct i2400mu *i2400mu, struct i2400m_msg_hdr *tx_msg,
 	usb_pipe = usb_sndbulkpipe(i2400mu->usb_dev, epd->bEndpointAddress);
 retry:
 	result = usb_bulk_msg(i2400mu->usb_dev, usb_pipe,
-			      tx_msg, tx_msg_size, &sent_size, HZ);
+			      tx_msg, tx_msg_size, &sent_size, 200);
 	usb_mark_last_busy(i2400mu->usb_dev);
 	switch (result) {
 	case 0:

drivers/net/wimax/i2400m/usb.c

@@ -173,7 +173,7 @@ int __i2400mu_send_barker(struct i2400mu *i2400mu,
 	pipe = usb_sndbulkpipe(i2400mu->usb_dev, epd->bEndpointAddress);
 	memcpy(buffer, barker, barker_size);
 	ret = usb_bulk_msg(i2400mu->usb_dev, pipe, buffer, barker_size,
-			   &actual_len, HZ);
+			   &actual_len, 200);
 	if (ret < 0) {
 		if (ret != -EINVAL)
 			dev_err(dev, "E: barker error: %d\n", ret);