Merge branch 'next/cleanup-samsung-macro' into next/cleanup-samsung

Documentation/ABI/testing/sysfs-bus-hsi

@@ -0,0 +1,19 @@
+What:		/sys/bus/hsi
+Date:		April 2012
+KernelVersion:	3.4
+Contact:	Carlos Chinea <carlos.chinea@nokia.com>
+Description:
+		High Speed Synchronous Serial Interface (HSI) is a
+		serial interface mainly used for connecting application
+		engines (APE) with cellular modem engines (CMT) in cellular
+		handsets.
+		The bus will be populated with devices (hsi_clients) representing
+		the protocols available in the system. Bus drivers implement
+		those protocols.
+
+What:		/sys/bus/hsi/devices/.../modalias
+Date:		April 2012
+KernelVersion:	3.4
+Contact:	Carlos Chinea <carlos.chinea@nokia.com>
+Description:	Stores the same MODALIAS value emitted by uevent
+		Format: hsi:<hsi_client device name>

Documentation/DocBook/media/v4l/pixfmt-nv12m.xml

@@ -1,6 +1,6 @@
     <refentry id="V4L2-PIX-FMT-NV12M">
       <refmeta>
-	<refentrytitle>V4L2_PIX_FMT_NV12M ('NV12M')</refentrytitle>
+	<refentrytitle>V4L2_PIX_FMT_NV12M ('NM12')</refentrytitle>
 	&manvol;
       </refmeta>
       <refnamediv>

Documentation/DocBook/media/v4l/pixfmt-yuv420m.xml

@@ -1,6 +1,6 @@
     <refentry id="V4L2-PIX-FMT-YUV420M">
       <refmeta>
-	<refentrytitle>V4L2_PIX_FMT_YUV420M ('YU12M')</refentrytitle>
+	<refentrytitle>V4L2_PIX_FMT_YUV420M ('YM12')</refentrytitle>
 	&manvol;
       </refmeta>
       <refnamediv>

Documentation/devicetree/bindings/ata/calxeda-sata.txt → Documentation/devicetree/bindings/ata/ahci-platform.txt

@@ -1,10 +1,10 @@
-* Calxeda SATA Controller
+* AHCI SATA Controller
 
 SATA nodes are defined to describe on-chip Serial ATA controllers.
 Each SATA controller should have its own node.
 
 Required properties:
-- compatible        : compatible list, contains "calxeda,hb-ahci"
+- compatible        : compatible list, contains "calxeda,hb-ahci" or "snps,spear-ahci"
 - interrupts        : <interrupt mapping for SATA IRQ>
 - reg               : <registers mapping>
 
@@ -14,4 +14,3 @@ Example:
                 reg = <0xffe08000 0x1000>;
                 interrupts = <115>;
         };
-

Documentation/devicetree/bindings/sound/sgtl5000.txt

@@ -3,6 +3,8 @@
 Required properties:
 - compatible : "fsl,sgtl5000".
 
+- reg : the I2C address of the device
+
 Example:
 
 codec: sgtl5000@0a {

Documentation/networking/ip-sysctl.txt

@@ -147,7 +147,7 @@ tcp_adv_win_scale - INTEGER
 	(if tcp_adv_win_scale > 0) or bytes-bytes/2^(-tcp_adv_win_scale),
 	if it is <= 0.
 	Possible values are [-31, 31], inclusive.
-	Default: 2
+	Default: 1
 
 tcp_allowed_congestion_control - STRING
 	Show/set the congestion control choices available to non-privileged
@@ -410,7 +410,7 @@ tcp_rmem - vector of 3 INTEGERs: min, default, max
 	net.core.rmem_max.  Calling setsockopt() with SO_RCVBUF disables
 	automatic tuning of that socket's receive buffer size, in which
 	case this value is ignored.
-	Default: between 87380B and 4MB, depending on RAM size.
+	Default: between 87380B and 6MB, depending on RAM size.
 
 tcp_sack - BOOLEAN
 	Enable select acknowledgments (SACKS).

Documentation/power/freezing-of-tasks.txt

@@ -9,7 +9,7 @@ architectures).
 
 II. How does it work?
 
-There are four per-task flags used for that, PF_NOFREEZE, PF_FROZEN, TIF_FREEZE
+There are three per-task flags used for that, PF_NOFREEZE, PF_FROZEN
 and PF_FREEZER_SKIP (the last one is auxiliary).  The tasks that have
 PF_NOFREEZE unset (all user space processes and some kernel threads) are
 regarded as 'freezable' and treated in a special way before the system enters a
@@ -17,30 +17,31 @@ suspend state as well as before a hibernation image is created (in what follows
 we only consider hibernation, but the description also applies to suspend).
 
 Namely, as the first step of the hibernation procedure the function
-freeze_processes() (defined in kernel/power/process.c) is called.  It executes
-try_to_freeze_tasks() that sets TIF_FREEZE for all of the freezable tasks and
-either wakes them up, if they are kernel threads, or sends fake signals to them,
-if they are user space processes.  A task that has TIF_FREEZE set, should react
-to it by calling the function called __refrigerator() (defined in
-kernel/freezer.c), which sets the task's PF_FROZEN flag, changes its state
-to TASK_UNINTERRUPTIBLE and makes it loop until PF_FROZEN is cleared for it.
-Then, we say that the task is 'frozen' and therefore the set of functions
-handling this mechanism is referred to as 'the freezer' (these functions are
-defined in kernel/power/process.c, kernel/freezer.c & include/linux/freezer.h).
-User space processes are generally frozen before kernel threads.
+freeze_processes() (defined in kernel/power/process.c) is called.  A system-wide
+variable system_freezing_cnt (as opposed to a per-task flag) is used to indicate
+whether the system is to undergo a freezing operation. And freeze_processes()
+sets this variable.  After this, it executes try_to_freeze_tasks() that sends a
+fake signal to all user space processes, and wakes up all the kernel threads.
+All freezable tasks must react to that by calling try_to_freeze(), which
+results in a call to __refrigerator() (defined in kernel/freezer.c), which sets
+the task's PF_FROZEN flag, changes its state to TASK_UNINTERRUPTIBLE and makes
+it loop until PF_FROZEN is cleared for it. Then, we say that the task is
+'frozen' and therefore the set of functions handling this mechanism is referred
+to as 'the freezer' (these functions are defined in kernel/power/process.c,
+kernel/freezer.c & include/linux/freezer.h). User space processes are generally
+frozen before kernel threads.
 
 __refrigerator() must not be called directly.  Instead, use the
 try_to_freeze() function (defined in include/linux/freezer.h), that checks
-the task's TIF_FREEZE flag and makes the task enter __refrigerator() if the
-flag is set.
+if the task is to be frozen and makes the task enter __refrigerator().
 
 For user space processes try_to_freeze() is called automatically from the
 signal-handling code, but the freezable kernel threads need to call it
 explicitly in suitable places or use the wait_event_freezable() or
 wait_event_freezable_timeout() macros (defined in include/linux/freezer.h)
-that combine interruptible sleep with checking if TIF_FREEZE is set and calling
-try_to_freeze().  The main loop of a freezable kernel thread may look like the
-following one:
+that combine interruptible sleep with checking if the task is to be frozen and
+calling try_to_freeze().  The main loop of a freezable kernel thread may look
+like the following one:
 
 	set_freezable();
 	do {
@@ -53,7 +54,7 @@ following one:
 (from drivers/usb/core/hub.c::hub_thread()).
 
 If a freezable kernel thread fails to call try_to_freeze() after the freezer has
-set TIF_FREEZE for it, the freezing of tasks will fail and the entire
+initiated a freezing operation, the freezing of tasks will fail and the entire
 hibernation operation will be cancelled.  For this reason, freezable kernel
 threads must call try_to_freeze() somewhere or use one of the
 wait_event_freezable() and wait_event_freezable_timeout() macros.

Documentation/security/keys.txt

@@ -123,7 +123,7 @@ KEY SERVICE OVERVIEW
 
 The key service provides a number of features besides keys:
 
- (*) The key service defines two special key types:
+ (*) The key service defines three special key types:
 
      (+) "keyring"
 
@@ -137,6 +137,18 @@ The key service provides a number of features besides keys:
 	 blobs of data. These can be created, updated and read by userspace,
 	 and aren't intended for use by kernel services.
 
+     (+) "logon"
+
+	 Like a "user" key, a "logon" key has a payload that is an arbitrary
+	 blob of data. It is intended as a place to store secrets which are
+	 accessible to the kernel but not to userspace programs.
+
+	 The description can be arbitrary, but must be prefixed with a non-zero
+	 length string that describes the key "subclass". The subclass is
+	 separated from the rest of the description by a ':'. "logon" keys can
+	 be created and updated from userspace, but the payload is only
+	 readable from kernel space.
+
  (*) Each process subscribes to three keyrings: a thread-specific keyring, a
      process-specific keyring, and a session-specific keyring.
 

MAINTAINERS

@@ -1968,10 +1968,7 @@ S:	Maintained
 F:	drivers/net/ethernet/ti/cpmac.c
 
 CPU FREQUENCY DRIVERS
-M:	Dave Jones <davej@redhat.com>
 L:	cpufreq@vger.kernel.org
-W:	http://www.codemonkey.org.uk/projects/cpufreq/
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq.git
 S:	Maintained
 F:	drivers/cpufreq/
 F:	include/linux/cpufreq.h
@@ -2321,9 +2318,9 @@ S:	Supported
 F:	drivers/acpi/dock.c
 
 DOCUMENTATION
-M:	Randy Dunlap <rdunlap@xenotime.net>
+M:	Rob Landley <rob@landley.net>
 L:	linux-doc@vger.kernel.org
-T:	quilt http://xenotime.net/kernel-doc-patches/current/
+T:	TBD
 S:	Maintained
 F:	Documentation/
 
@@ -3592,6 +3589,7 @@ S:	Supported
 F:	drivers/net/wireless/iwlegacy/
 
 INTEL WIRELESS WIFI LINK (iwlwifi)
+M:	Johannes Berg <johannes.berg@intel.com>
 M:	Wey-Yi Guy <wey-yi.w.guy@intel.com>
 M:	Intel Linux Wireless <ilw@linux.intel.com>
 L:	linux-wireless@vger.kernel.org
@@ -5891,11 +5889,11 @@ F:	Documentation/scsi/st.txt
 F:	drivers/scsi/st*
 
 SCTP PROTOCOL
-M:	Vlad Yasevich <vladislav.yasevich@hp.com>
+M:	Vlad Yasevich <vyasevich@gmail.com>
 M:	Sridhar Samudrala <sri@us.ibm.com>
 L:	linux-sctp@vger.kernel.org
 W:	http://lksctp.sourceforge.net
-S:	Supported
+S:	Maintained
 F:	Documentation/networking/sctp.txt
 F:	include/linux/sctp.h
 F:	include/net/sctp/
@@ -7578,8 +7576,8 @@ F:	Documentation/filesystems/xfs.txt
 F:	fs/xfs/
 
 XILINX AXI ETHERNET DRIVER
-M:	Ariane Keller <ariane.keller@tik.ee.ethz.ch>
-M:	Daniel Borkmann <daniel.borkmann@tik.ee.ethz.ch>
+M:	Anirudha Sarangi <anirudh@xilinx.com>
+M:	John Linn <John.Linn@xilinx.com>
 S:	Maintained
 F:	drivers/net/ethernet/xilinx/xilinx_axienet*
 

Makefile

@@ -1,7 +1,7 @@
 VERSION = 3
 PATCHLEVEL = 4
 SUBLEVEL = 0
-EXTRAVERSION = -rc3
+EXTRAVERSION = -rc6
 NAME = Saber-toothed Squirrel
 
 # *DOCUMENTATION*

arch/alpha/Kconfig

@@ -477,7 +477,7 @@ config ALPHA_BROKEN_IRQ_MASK
 
 config VGA_HOSE
 	bool
-	depends on ALPHA_GENERIC || ALPHA_TITAN || ALPHA_MARVEL || ALPHA_TSUNAMI
+	depends on VGA_CONSOLE && (ALPHA_GENERIC || ALPHA_TITAN || ALPHA_MARVEL || ALPHA_TSUNAMI)
 	default y
 	help
 	  Support VGA on an arbitrary hose; needed for several platforms

arch/alpha/include/asm/rtc.h

@@ -1,14 +1,10 @@
 #ifndef _ALPHA_RTC_H
 #define _ALPHA_RTC_H
 
-#if defined(CONFIG_ALPHA_GENERIC)
+#if defined(CONFIG_ALPHA_MARVEL) && defined(CONFIG_SMP) \
+ || defined(CONFIG_ALPHA_GENERIC)
 # define get_rtc_time		alpha_mv.rtc_get_time
 # define set_rtc_time		alpha_mv.rtc_set_time
-#else
-# if defined(CONFIG_ALPHA_MARVEL) && defined(CONFIG_SMP)
-#  define get_rtc_time		marvel_get_rtc_time
-#  define set_rtc_time		marvel_set_rtc_time
-# endif
 #endif
 
 #include <asm-generic/rtc.h>

arch/alpha/kernel/core_tsunami.c

@@ -11,6 +11,7 @@
 #include <asm/core_tsunami.h>
 #undef __EXTERN_INLINE
 
+#include <linux/module.h>
 #include <linux/types.h>
 #include <linux/pci.h>
 #include <linux/sched.h>

arch/alpha/kernel/sys_marvel.c

@@ -317,7 +317,7 @@ marvel_init_irq(void)
 }
 
 static int 
-marvel_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+marvel_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 {
 	struct pci_controller *hose = dev->sysdata;
 	struct io7_port *io7_port = hose->sysdata;

arch/arm/Kconfig

@@ -1186,6 +1186,15 @@ if !MMU
 source "arch/arm/Kconfig-nommu"
 endif
 
+config ARM_ERRATA_326103
+	bool "ARM errata: FSR write bit incorrect on a SWP to read-only memory"
+	depends on CPU_V6
+	help
+	  Executing a SWP instruction to read-only memory does not set bit 11
+	  of the FSR on the ARM 1136 prior to r1p0. This causes the kernel to
+	  treat the access as a read, preventing a COW from occurring and
+	  causing the faulting task to livelock.
+
 config ARM_ERRATA_411920
 	bool "ARM errata: Invalidation of the Instruction Cache operation can fail"
 	depends on CPU_V6 || CPU_V6K

arch/arm/boot/dts/msm8660-surf.dts

@@ -10,7 +10,7 @@
 	intc: interrupt-controller@02080000 {
 		compatible = "qcom,msm-8660-qgic";
 		interrupt-controller;
-		#interrupt-cells = <1>;
+		#interrupt-cells = <3>;
 		reg = < 0x02080000 0x1000 >,
 		      < 0x02081000 0x1000 >;
 	};
@@ -19,6 +19,6 @@
 		compatible = "qcom,msm-hsuart", "qcom,msm-uart";
 		reg = <0x19c40000 0x1000>,
 		      <0x19c00000 0x1000>;
-		interrupts = <195>;
+		interrupts = <0 195 0x0>;
 	};
 };

arch/arm/boot/dts/versatile-ab.dts

@@ -173,7 +173,7 @@
 			mmc@5000 {
 				compatible = "arm,primecell";
 				reg = < 0x5000 0x1000>;
-				interrupts = <22>;
+				interrupts = <22 34>;
 			};
 			kmi@6000 {
 				compatible = "arm,pl050", "arm,primecell";

arch/arm/boot/dts/versatile-pb.dts

@@ -41,7 +41,7 @@
 			mmc@b000 {
 				compatible = "arm,primecell";
 				reg = <0xb000 0x1000>;
-				interrupts = <23>;
+				interrupts = <23 34>;
 			};
 		};
 	};

arch/arm/configs/imx_v4_v5_defconfig

@@ -112,6 +112,7 @@ CONFIG_WATCHDOG=y
 CONFIG_IMX2_WDT=y
 CONFIG_MFD_MC13XXX=y
 CONFIG_REGULATOR=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
 CONFIG_REGULATOR_MC13783=y
 CONFIG_REGULATOR_MC13892=y
 CONFIG_FB=y

arch/arm/configs/mini2440_defconfig

@@ -14,6 +14,8 @@ CONFIG_MODULE_FORCE_UNLOAD=y
 # CONFIG_BLK_DEV_BSG is not set
 CONFIG_BLK_DEV_INTEGRITY=y
 CONFIG_ARCH_S3C24XX=y
+# CONFIG_CPU_S3C2410 is not set
+CONFIG_CPU_S3C2440=y
 CONFIG_S3C_ADC=y
 CONFIG_S3C24XX_PWM=y
 CONFIG_MACH_MINI2440=y

arch/arm/configs/u8500_defconfig

@@ -8,8 +8,6 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_LBDAF is not set
 # CONFIG_BLK_DEV_BSG is not set
 CONFIG_ARCH_U8500=y
-CONFIG_UX500_SOC_DB5500=y
-CONFIG_UX500_SOC_DB8500=y
 CONFIG_MACH_HREFV60=y
 CONFIG_MACH_SNOWBALL=y
 CONFIG_MACH_U5500=y
@@ -39,7 +37,6 @@ CONFIG_CAIF=y
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=65536
-CONFIG_MISC_DEVICES=y
 CONFIG_AB8500_PWM=y
 CONFIG_SENSORS_BH1780=y
 CONFIG_NETDEVICES=y
@@ -65,16 +62,18 @@ CONFIG_SERIAL_AMBA_PL011=y
 CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
 CONFIG_HW_RANDOM=y
 CONFIG_HW_RANDOM_NOMADIK=y
-CONFIG_I2C=y
-CONFIG_I2C_NOMADIK=y
 CONFIG_SPI=y
 CONFIG_SPI_PL022=y
 CONFIG_GPIO_STMPE=y
 CONFIG_GPIO_TC3589X=y
+CONFIG_POWER_SUPPLY=y
+CONFIG_AB8500_BM=y
+CONFIG_AB8500_BATTERY_THERM_ON_BATCTRL=y
 CONFIG_MFD_STMPE=y
 CONFIG_MFD_TC3589X=y
 CONFIG_AB5500_CORE=y
 CONFIG_AB8500_CORE=y
+CONFIG_REGULATOR=y
 CONFIG_REGULATOR_AB8500=y
 # CONFIG_HID_SUPPORT is not set
 CONFIG_USB_GADGET=y

arch/arm/include/asm/thread_info.h

@@ -118,6 +118,13 @@ extern void iwmmxt_task_switch(struct thread_info *);
 extern void vfp_sync_hwstate(struct thread_info *);
 extern void vfp_flush_hwstate(struct thread_info *);
 
+struct user_vfp;
+struct user_vfp_exc;
+
+extern int vfp_preserve_user_clear_hwstate(struct user_vfp __user *,
+					   struct user_vfp_exc __user *);
+extern int vfp_restore_user_hwstate(struct user_vfp __user *,
+				    struct user_vfp_exc __user *);
 #endif
 
 /*

arch/arm/include/asm/tls.h

@@ -7,6 +7,8 @@
 
 	.macro set_tls_v6k, tp, tmp1, tmp2
 	mcr	p15, 0, \tp, c13, c0, 3		@ set TLS register
+	mov	\tmp1, #0
+	mcr	p15, 0, \tmp1, c13, c0, 2	@ clear user r/w TLS register
 	.endm
 
 	.macro set_tls_v6, tp, tmp1, tmp2
@@ -15,6 +17,8 @@
 	mov	\tmp2, #0xffff0fff
 	tst	\tmp1, #HWCAP_TLS		@ hardware TLS available?
 	mcrne	p15, 0, \tp, c13, c0, 3		@ yes, set TLS register
+	movne	\tmp1, #0
+	mcrne	p15, 0, \tmp1, c13, c0, 2	@ clear user r/w TLS register
 	streq	\tp, [\tmp2, #-15]		@ set TLS value at 0xffff0ff0
 	.endm
 

arch/arm/kernel/irq.c

@@ -155,10 +155,10 @@ static bool migrate_one_irq(struct irq_desc *desc)
 	}
 
 	c = irq_data_get_irq_chip(d);
-	if (c->irq_set_affinity)
-		c->irq_set_affinity(d, affinity, true);
-	else
+	if (!c->irq_set_affinity)
 		pr_debug("IRQ%u: unable to set affinity\n", d->irq);
+	else if (c->irq_set_affinity(d, affinity, true) == IRQ_SET_MASK_OK && ret)
+		cpumask_copy(d->affinity, affinity);
 
 	return ret;
 }

arch/arm/kernel/signal.c

@@ -180,44 +180,23 @@ static int restore_iwmmxt_context(struct iwmmxt_sigframe *frame)
 
 static int preserve_vfp_context(struct vfp_sigframe __user *frame)
 {
-	struct thread_info *thread = current_thread_info();
-	struct vfp_hard_struct *h = &thread->vfpstate.hard;
 	const unsigned long magic = VFP_MAGIC;
 	const unsigned long size = VFP_STORAGE_SIZE;
 	int err = 0;
 
-	vfp_sync_hwstate(thread);
 	__put_user_error(magic, &frame->magic, err);
 	__put_user_error(size, &frame->size, err);
 
-	/*
-	 * Copy the floating point registers. There can be unused
-	 * registers see asm/hwcap.h for details.
-	 */
-	err |= __copy_to_user(&frame->ufp.fpregs, &h->fpregs,
-			      sizeof(h->fpregs));
-	/*
-	 * Copy the status and control register.
-	 */
-	__put_user_error(h->fpscr, &frame->ufp.fpscr, err);
-
-	/*
-	 * Copy the exception registers.
-	 */
-	__put_user_error(h->fpexc, &frame->ufp_exc.fpexc, err);
-	__put_user_error(h->fpinst, &frame->ufp_exc.fpinst, err);
-	__put_user_error(h->fpinst2, &frame->ufp_exc.fpinst2, err);
+	if (err)
+		return -EFAULT;
 
-	return err ? -EFAULT : 0;
+	return vfp_preserve_user_clear_hwstate(&frame->ufp, &frame->ufp_exc);
 }
 
 static int restore_vfp_context(struct vfp_sigframe __user *frame)
 {
-	struct thread_info *thread = current_thread_info();
-	struct vfp_hard_struct *h = &thread->vfpstate.hard;
 	unsigned long magic;
 	unsigned long size;
-	unsigned long fpexc;
 	int err = 0;
 
 	__get_user_error(magic, &frame->magic, err);
@@ -228,33 +207,7 @@ static int restore_vfp_context(struct vfp_sigframe __user *frame)
 	if (magic != VFP_MAGIC || size != VFP_STORAGE_SIZE)
 		return -EINVAL;
 
-	vfp_flush_hwstate(thread);
-
-	/*
-	 * Copy the floating point registers. There can be unused
-	 * registers see asm/hwcap.h for details.
-	 */
-	err |= __copy_from_user(&h->fpregs, &frame->ufp.fpregs,
-				sizeof(h->fpregs));
-	/*
-	 * Copy the status and control register.
-	 */
-	__get_user_error(h->fpscr, &frame->ufp.fpscr, err);
-
-	/*
-	 * Sanitise and restore the exception registers.
-	 */
-	__get_user_error(fpexc, &frame->ufp_exc.fpexc, err);
-	/* Ensure the VFP is enabled. */
-	fpexc |= FPEXC_EN;
-	/* Ensure FPINST2 is invalid and the exception flag is cleared. */
-	fpexc &= ~(FPEXC_EX | FPEXC_FP2V);
-	h->fpexc = fpexc;
-
-	__get_user_error(h->fpinst, &frame->ufp_exc.fpinst, err);
-	__get_user_error(h->fpinst2, &frame->ufp_exc.fpinst2, err);
-
-	return err ? -EFAULT : 0;
+	return vfp_restore_user_hwstate(&frame->ufp, &frame->ufp_exc);
 }
 
 #endif

arch/arm/kernel/smp.c

@@ -510,10 +510,6 @@ static void ipi_cpu_stop(unsigned int cpu)
 	local_fiq_disable();
 	local_irq_disable();
 
-#ifdef CONFIG_HOTPLUG_CPU
-	platform_cpu_kill(cpu);
-#endif
-
 	while (1)
 		cpu_relax();
 }
@@ -576,17 +572,25 @@ void smp_send_reschedule(int cpu)
 	smp_cross_call(cpumask_of(cpu), IPI_RESCHEDULE);
 }
 
+#ifdef CONFIG_HOTPLUG_CPU
+static void smp_kill_cpus(cpumask_t *mask)
+{
+	unsigned int cpu;
+	for_each_cpu(cpu, mask)
+		platform_cpu_kill(cpu);
+}
+#else
+static void smp_kill_cpus(cpumask_t *mask) { }
+#endif
+
 void smp_send_stop(void)
 {
 	unsigned long timeout;
+	struct cpumask mask;
 
-	if (num_online_cpus() > 1) {
-		struct cpumask mask;
-		cpumask_copy(&mask, cpu_online_mask);
-		cpumask_clear_cpu(smp_processor_id(), &mask);
-
-		smp_cross_call(&mask, IPI_CPU_STOP);
-	}
+	cpumask_copy(&mask, cpu_online_mask);
+	cpumask_clear_cpu(smp_processor_id(), &mask);
+	smp_cross_call(&mask, IPI_CPU_STOP);
 
 	/* Wait up to one second for other CPUs to stop */
 	timeout = USEC_PER_SEC;
@@ -595,6 +599,8 @@ void smp_send_stop(void)
 
 	if (num_online_cpus() > 1)
 		pr_warning("SMP: failed to stop secondary CPUs\n");
+
+	smp_kill_cpus(&mask);
 }
 
 /*

arch/arm/kernel/smp_twd.c

@@ -118,14 +118,10 @@ static int twd_cpufreq_transition(struct notifier_block *nb,
 	 * The twd clock events must be reprogrammed to account for the new
 	 * frequency.  The timer is local to a cpu, so cross-call to the
 	 * changing cpu.
-	 *
-	 * Only wait for it to finish, if the cpu is active to avoid
-	 * deadlock when cpu1 is spinning on while(!cpu_active(cpu1)) during
-	 * booting of that cpu.
 	 */
 	if (state == CPUFREQ_POSTCHANGE || state == CPUFREQ_RESUMECHANGE)
 		smp_call_function_single(freqs->cpu, twd_update_frequency,
-					 NULL, cpu_active(freqs->cpu));
+			NULL, 1);
 
 	return NOTIFY_OK;
 }

arch/arm/mach-at91/at91rm9200_devices.c

@@ -1173,7 +1173,6 @@ void __init at91_add_device_serial(void)
 		printk(KERN_INFO "AT91: No default serial console defined.\n");
 }
 #else
-void __init __deprecated at91_init_serial(struct at91_uart_config *config) {}
 void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {}
 void __init at91_set_serial_console(unsigned portnr) {}
 void __init at91_add_device_serial(void) {}

arch/arm/mach-at91/at91rm9200_time.c

@@ -23,6 +23,7 @@
 #include <linux/interrupt.h>
 #include <linux/irq.h>
 #include <linux/clockchips.h>
+#include <linux/export.h>
 
 #include <asm/mach/time.h>
 
@@ -176,6 +177,7 @@ static struct clock_event_device clkevt = {
 };
 
 void __iomem *at91_st_base;
+EXPORT_SYMBOL_GPL(at91_st_base);
 
 void __init at91rm9200_ioremap_st(u32 addr)
 {

arch/arm/mach-at91/board-rm9200ek.c

@@ -117,7 +117,7 @@ static struct i2c_board_info __initdata ek_i2c_devices[] = {
 };
 
 #define EK_FLASH_BASE	AT91_CHIPSELECT_0
-#define EK_FLASH_SIZE	SZ_2M
+#define EK_FLASH_SIZE	SZ_8M
 
 static struct physmap_flash_data ek_flash_data = {
 	.width		= 2,

arch/arm/mach-at91/board-sam9261ek.c

@@ -85,8 +85,6 @@ static struct resource dm9000_resource[] = {
 		.flags	= IORESOURCE_MEM
 	},
 	[2] = {
-		.start	= AT91_PIN_PC11,
-		.end	= AT91_PIN_PC11,
 		.flags	= IORESOURCE_IRQ
 			| IORESOURCE_IRQ_LOWEDGE | IORESOURCE_IRQ_HIGHEDGE,
 	}
@@ -130,6 +128,8 @@ static struct sam9_smc_config __initdata dm9000_smc_config = {
 
 static void __init ek_add_device_dm9000(void)
 {
+	struct resource *r = &dm9000_resource[2];
+
 	/* Configure chip-select 2 (DM9000) */
 	sam9_smc_configure(0, 2, &dm9000_smc_config);
 
@@ -139,6 +139,7 @@ static void __init ek_add_device_dm9000(void)
 	/* Configure Interrupt pin as input, no pull-up */
 	at91_set_gpio_input(AT91_PIN_PC11, 0);
 
+	r->start = r->end = gpio_to_irq(AT91_PIN_PC11);
 	platform_device_register(&dm9000_device);
 }
 #else

arch/arm/mach-at91/clock.c

@@ -35,6 +35,7 @@
 #include "generic.h"
 
 void __iomem *at91_pmc_base;
+EXPORT_SYMBOL_GPL(at91_pmc_base);
 
 /*
  * There's a lot more which can be done with clocks, including cpufreq

arch/arm/mach-at91/include/mach/at91_pmc.h

@@ -25,7 +25,7 @@ extern void __iomem *at91_pmc_base;
 #define at91_pmc_write(field, value) \
 	__raw_writel(value, at91_pmc_base + field)
 #else
-.extern at91_aic_base
+.extern at91_pmc_base
 #endif
 
 #define	AT91_PMC_SCER		0x00			/* System Clock Enable Register */

arch/arm/mach-at91/setup.c

@@ -54,6 +54,7 @@ void __init at91_init_interrupts(unsigned int *priority)
 }
 
 void __iomem *at91_ramc_base[2];
+EXPORT_SYMBOL_GPL(at91_ramc_base);
 
 void __init at91_ioremap_ramc(int id, u32 addr, u32 size)
 {
@@ -292,6 +293,7 @@ void __init at91_ioremap_rstc(u32 base_addr)
 }
 
 void __iomem *at91_matrix_base;
+EXPORT_SYMBOL_GPL(at91_matrix_base);
 
 void __init at91_ioremap_matrix(u32 base_addr)
 {

arch/arm/mach-bcmring/core.c

@@ -52,8 +52,8 @@
 #include <mach/csp/chipcHw_inline.h>
 #include <mach/csp/tmrHw_reg.h>
 
-static AMBA_APB_DEVICE(uartA, "uarta", MM_ADDR_IO_UARTA, { IRQ_UARTA }, NULL);
-static AMBA_APB_DEVICE(uartB, "uartb", MM_ADDR_IO_UARTB, { IRQ_UARTB }, NULL);
+static AMBA_APB_DEVICE(uartA, "uartA", 0, MM_ADDR_IO_UARTA, {IRQ_UARTA}, NULL);
+static AMBA_APB_DEVICE(uartB, "uartB", 0, MM_ADDR_IO_UARTB, {IRQ_UARTB}, NULL);
 
 static struct clk pll1_clk = {
 	.name = "PLL1",

arch/arm/mach-exynos/clock-exynos4.c

@@ -497,25 +497,25 @@ static struct clk exynos4_init_clocks_off[] = {
 		.ctrlbit	= (1 << 3),
 	}, {
 		.name		= "hsmmc",
-		.devname	= "s3c-sdhci.0",
+		.devname	= "exynos4-sdhci.0",
 		.parent		= &exynos4_clk_aclk_133.clk,
 		.enable		= exynos4_clk_ip_fsys_ctrl,
 		.ctrlbit	= (1 << 5),
 	}, {
 		.name		= "hsmmc",
-		.devname	= "s3c-sdhci.1",
+		.devname	= "exynos4-sdhci.1",
 		.parent		= &exynos4_clk_aclk_133.clk,
 		.enable		= exynos4_clk_ip_fsys_ctrl,
 		.ctrlbit	= (1 << 6),
 	}, {
 		.name		= "hsmmc",
-		.devname	= "s3c-sdhci.2",
+		.devname	= "exynos4-sdhci.2",
 		.parent		= &exynos4_clk_aclk_133.clk,
 		.enable		= exynos4_clk_ip_fsys_ctrl,
 		.ctrlbit	= (1 << 7),
 	}, {
 		.name		= "hsmmc",
-		.devname	= "s3c-sdhci.3",
+		.devname	= "exynos4-sdhci.3",
 		.parent		= &exynos4_clk_aclk_133.clk,
 		.enable		= exynos4_clk_ip_fsys_ctrl,
 		.ctrlbit	= (1 << 8),
@@ -1202,7 +1202,7 @@ static struct clksrc_clk exynos4_clk_sclk_uart3 = {
 static struct clksrc_clk exynos4_clk_sclk_mmc0 = {
 	.clk	= {
 		.name		= "sclk_mmc",
-		.devname	= "s3c-sdhci.0",
+		.devname	= "exynos4-sdhci.0",
 		.parent		= &exynos4_clk_dout_mmc0.clk,
 		.enable		= exynos4_clksrc_mask_fsys_ctrl,
 		.ctrlbit	= (1 << 0),
@@ -1213,7 +1213,7 @@ static struct clksrc_clk exynos4_clk_sclk_mmc0 = {
 static struct clksrc_clk exynos4_clk_sclk_mmc1 = {
 	.clk	= {
 		.name		= "sclk_mmc",
-		.devname	= "s3c-sdhci.1",
+		.devname	= "exynos4-sdhci.1",
 		.parent		= &exynos4_clk_dout_mmc1.clk,
 		.enable		= exynos4_clksrc_mask_fsys_ctrl,
 		.ctrlbit	= (1 << 4),
@@ -1224,7 +1224,7 @@ static struct clksrc_clk exynos4_clk_sclk_mmc1 = {
 static struct clksrc_clk exynos4_clk_sclk_mmc2 = {
 	.clk	= {
 		.name		= "sclk_mmc",
-		.devname	= "s3c-sdhci.2",
+		.devname	= "exynos4-sdhci.2",
 		.parent		= &exynos4_clk_dout_mmc2.clk,
 		.enable		= exynos4_clksrc_mask_fsys_ctrl,
 		.ctrlbit	= (1 << 8),
@@ -1235,7 +1235,7 @@ static struct clksrc_clk exynos4_clk_sclk_mmc2 = {
 static struct clksrc_clk exynos4_clk_sclk_mmc3 = {
 	.clk	= {
 		.name		= "sclk_mmc",
-		.devname	= "s3c-sdhci.3",
+		.devname	= "exynos4-sdhci.3",
 		.parent		= &exynos4_clk_dout_mmc3.clk,
 		.enable		= exynos4_clksrc_mask_fsys_ctrl,
 		.ctrlbit	= (1 << 12),
@@ -1340,10 +1340,10 @@ static struct clk_lookup exynos4_clk_lookup[] = {
 	CLKDEV_INIT("exynos4210-uart.1", "clk_uart_baud0", &exynos4_clk_sclk_uart1.clk),
 	CLKDEV_INIT("exynos4210-uart.2", "clk_uart_baud0", &exynos4_clk_sclk_uart2.clk),
 	CLKDEV_INIT("exynos4210-uart.3", "clk_uart_baud0", &exynos4_clk_sclk_uart3.clk),
-	CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.2", &exynos4_clk_sclk_mmc0.clk),
-	CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &exynos4_clk_sclk_mmc1.clk),
-	CLKDEV_INIT("s3c-sdhci.2", "mmc_busclk.2", &exynos4_clk_sclk_mmc2.clk),
-	CLKDEV_INIT("s3c-sdhci.3", "mmc_busclk.2", &exynos4_clk_sclk_mmc3.clk),
+	CLKDEV_INIT("exynos4-sdhci.0", "mmc_busclk.2", &exynos4_clk_sclk_mmc0.clk),
+	CLKDEV_INIT("exynos4-sdhci.1", "mmc_busclk.2", &exynos4_clk_sclk_mmc1.clk),
+	CLKDEV_INIT("exynos4-sdhci.2", "mmc_busclk.2", &exynos4_clk_sclk_mmc2.clk),
+	CLKDEV_INIT("exynos4-sdhci.3", "mmc_busclk.2", &exynos4_clk_sclk_mmc3.clk),
 	CLKDEV_INIT("exynos4-fb.0", "lcd", &exynos4_clk_fimd0),
 	CLKDEV_INIT("dma-pl330.0", "apb_pclk", &exynos4_clk_pdma0),
 	CLKDEV_INIT("dma-pl330.1", "apb_pclk", &exynos4_clk_pdma1),

arch/arm/mach-exynos/clock-exynos5.c

@@ -455,25 +455,25 @@ static struct clk exynos5_init_clocks_off[] = {
 		.ctrlbit	= (1 << 20),
 	}, {
 		.name		= "hsmmc",
-		.devname	= "s3c-sdhci.0",
+		.devname	= "exynos4-sdhci.0",
 		.parent		= &exynos5_clk_aclk_200.clk,
 		.enable		= exynos5_clk_ip_fsys_ctrl,
 		.ctrlbit	= (1 << 12),
 	}, {
 		.name		= "hsmmc",
-		.devname	= "s3c-sdhci.1",
+		.devname	= "exynos4-sdhci.1",
 		.parent		= &exynos5_clk_aclk_200.clk,
 		.enable		= exynos5_clk_ip_fsys_ctrl,
 		.ctrlbit	= (1 << 13),
 	}, {
 		.name		= "hsmmc",
-		.devname	= "s3c-sdhci.2",
+		.devname	= "exynos4-sdhci.2",
 		.parent		= &exynos5_clk_aclk_200.clk,
 		.enable		= exynos5_clk_ip_fsys_ctrl,
 		.ctrlbit	= (1 << 14),
 	}, {
 		.name		= "hsmmc",
-		.devname	= "s3c-sdhci.3",
+		.devname	= "exynos4-sdhci.3",
 		.parent		= &exynos5_clk_aclk_200.clk,
 		.enable		= exynos5_clk_ip_fsys_ctrl,
 		.ctrlbit	= (1 << 15),
@@ -813,7 +813,7 @@ static struct clksrc_clk exynos5_clk_sclk_uart3 = {
 static struct clksrc_clk exynos5_clk_sclk_mmc0 = {
 	.clk	= {
 		.name		= "sclk_mmc",
-		.devname	= "s3c-sdhci.0",
+		.devname	= "exynos4-sdhci.0",
 		.parent		= &exynos5_clk_dout_mmc0.clk,
 		.enable		= exynos5_clksrc_mask_fsys_ctrl,
 		.ctrlbit	= (1 << 0),
@@ -824,7 +824,7 @@ static struct clksrc_clk exynos5_clk_sclk_mmc0 = {
 static struct clksrc_clk exynos5_clk_sclk_mmc1 = {
 	.clk	= {
 		.name		= "sclk_mmc",
-		.devname	= "s3c-sdhci.1",
+		.devname	= "exynos4-sdhci.1",
 		.parent		= &exynos5_clk_dout_mmc1.clk,
 		.enable		= exynos5_clksrc_mask_fsys_ctrl,
 		.ctrlbit	= (1 << 4),
@@ -835,7 +835,7 @@ static struct clksrc_clk exynos5_clk_sclk_mmc1 = {
 static struct clksrc_clk exynos5_clk_sclk_mmc2 = {
 	.clk	= {
 		.name		= "sclk_mmc",
-		.devname	= "s3c-sdhci.2",
+		.devname	= "exynos4-sdhci.2",
 		.parent		= &exynos5_clk_dout_mmc2.clk,
 		.enable		= exynos5_clksrc_mask_fsys_ctrl,
 		.ctrlbit	= (1 << 8),
@@ -846,7 +846,7 @@ static struct clksrc_clk exynos5_clk_sclk_mmc2 = {
 static struct clksrc_clk exynos5_clk_sclk_mmc3 = {
 	.clk	= {
 		.name		= "sclk_mmc",
-		.devname	= "s3c-sdhci.3",
+		.devname	= "exynos4-sdhci.3",
 		.parent		= &exynos5_clk_dout_mmc3.clk,
 		.enable		= exynos5_clksrc_mask_fsys_ctrl,
 		.ctrlbit	= (1 << 12),
@@ -990,10 +990,10 @@ static struct clk_lookup exynos5_clk_lookup[] = {
 	CLKDEV_INIT("exynos4210-uart.1", "clk_uart_baud0", &exynos5_clk_sclk_uart1.clk),
 	CLKDEV_INIT("exynos4210-uart.2", "clk_uart_baud0", &exynos5_clk_sclk_uart2.clk),
 	CLKDEV_INIT("exynos4210-uart.3", "clk_uart_baud0", &exynos5_clk_sclk_uart3.clk),
-	CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.2", &exynos5_clk_sclk_mmc0.clk),
-	CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &exynos5_clk_sclk_mmc1.clk),
-	CLKDEV_INIT("s3c-sdhci.2", "mmc_busclk.2", &exynos5_clk_sclk_mmc2.clk),
-	CLKDEV_INIT("s3c-sdhci.3", "mmc_busclk.2", &exynos5_clk_sclk_mmc3.clk),
+	CLKDEV_INIT("exynos4-sdhci.0", "mmc_busclk.2", &exynos5_clk_sclk_mmc0.clk),
+	CLKDEV_INIT("exynos4-sdhci.1", "mmc_busclk.2", &exynos5_clk_sclk_mmc1.clk),
+	CLKDEV_INIT("exynos4-sdhci.2", "mmc_busclk.2", &exynos5_clk_sclk_mmc2.clk),
+	CLKDEV_INIT("exynos4-sdhci.3", "mmc_busclk.2", &exynos5_clk_sclk_mmc3.clk),
 	CLKDEV_INIT("dma-pl330.0", "apb_pclk", &exynos5_clk_pdma0),
 	CLKDEV_INIT("dma-pl330.1", "apb_pclk", &exynos5_clk_pdma1),
 	CLKDEV_INIT("dma-pl330.2", "apb_pclk", &exynos5_clk_mdma1),

arch/arm/mach-exynos/common.c

@@ -326,6 +326,11 @@ static void __init exynos4_map_io(void)
 	s3c_fimc_setname(2, "exynos4-fimc");
 	s3c_fimc_setname(3, "exynos4-fimc");
 
+	s3c_sdhci_setname(0, "exynos4-sdhci");
+	s3c_sdhci_setname(1, "exynos4-sdhci");
+	s3c_sdhci_setname(2, "exynos4-sdhci");
+	s3c_sdhci_setname(3, "exynos4-sdhci");
+
 	/* The I2C bus controllers are directly compatible with s3c2440 */
 	s3c_i2c0_setname("s3c2440-i2c");
 	s3c_i2c1_setname("s3c2440-i2c");
@@ -344,6 +349,11 @@ static void __init exynos5_map_io(void)
 	s3c_device_i2c0.resource[1].start = EXYNOS5_IRQ_IIC;
 	s3c_device_i2c0.resource[1].end   = EXYNOS5_IRQ_IIC;
 
+	s3c_sdhci_setname(0, "exynos4-sdhci");
+	s3c_sdhci_setname(1, "exynos4-sdhci");
+	s3c_sdhci_setname(2, "exynos4-sdhci");
+	s3c_sdhci_setname(3, "exynos4-sdhci");
+
 	/* The I2C bus controllers are directly compatible with s3c2440 */
 	s3c_i2c0_setname("s3c2440-i2c");
 	s3c_i2c1_setname("s3c2440-i2c");
@@ -537,7 +547,9 @@ void __init exynos5_init_irq(void)
 {
 	int irq;
 
-	gic_init(0, IRQ_PPI(0), S5P_VA_GIC_DIST, S5P_VA_GIC_CPU);
+#ifdef CONFIG_OF
+	of_irq_init(exynos4_dt_irq_match);
+#endif
 
 	for (irq = 0; irq < EXYNOS5_MAX_COMBINER_NR; irq++) {
 		combiner_init(irq, (void __iomem *)S5P_VA_COMBINER(irq),

arch/arm/mach-exynos/dev-ahci.c

@@ -236,16 +236,8 @@ static struct ahci_platform_data exynos4_ahci_pdata = {
 };
 
 static struct resource exynos4_ahci_resource[] = {
-	[0] = {
-		.start	= EXYNOS4_PA_SATA,
-		.end	= EXYNOS4_PA_SATA + SZ_64K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= EXYNOS4_IRQ_SATA,
-		.end	= EXYNOS4_IRQ_SATA,
-		.flags	= IORESOURCE_IRQ,
-	},
+	[0] = DEFINE_RES_MEM(EXYNOS4_PA_SATA, SZ_64K),
+	[1] = DEFINE_RES_IRQ(EXYNOS4_IRQ_SATA),
 };
 
 static u64 exynos4_ahci_dmamask = DMA_BIT_MASK(32);

arch/arm/mach-exynos/dev-audio.c

@@ -62,26 +62,10 @@ static struct s3c_audio_pdata i2sv5_pdata = {
 };
 
 static struct resource exynos4_i2s0_resource[] = {
-	[0] = {
-		.start	= EXYNOS4_PA_I2S0,
-		.end	= EXYNOS4_PA_I2S0 + 0x100 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= DMACH_I2S0_TX,
-		.end	= DMACH_I2S0_TX,
-		.flags	= IORESOURCE_DMA,
-	},
-	[2] = {
-		.start	= DMACH_I2S0_RX,
-		.end	= DMACH_I2S0_RX,
-		.flags	= IORESOURCE_DMA,
-	},
-	[3] = {
-		.start	= DMACH_I2S0S_TX,
-		.end	= DMACH_I2S0S_TX,
-		.flags	= IORESOURCE_DMA,
-	},
+	[0] = DEFINE_RES_MEM(EXYNOS4_PA_I2S0, SZ_256),
+	[1] = DEFINE_RES_DMA(DMACH_I2S0_TX),
+	[2] = DEFINE_RES_DMA(DMACH_I2S0_RX),
+	[3] = DEFINE_RES_DMA(DMACH_I2S0S_TX),
 };
 
 struct platform_device exynos4_device_i2s0 = {
@@ -110,21 +94,9 @@ static struct s3c_audio_pdata i2sv3_pdata = {
 };
 
 static struct resource exynos4_i2s1_resource[] = {
-	[0] = {
-		.start	= EXYNOS4_PA_I2S1,
-		.end	= EXYNOS4_PA_I2S1 + 0x100 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= DMACH_I2S1_TX,
-		.end	= DMACH_I2S1_TX,
-		.flags	= IORESOURCE_DMA,
-	},
-	[2] = {
-		.start	= DMACH_I2S1_RX,
-		.end	= DMACH_I2S1_RX,
-		.flags	= IORESOURCE_DMA,
-	},
+	[0] = DEFINE_RES_MEM(EXYNOS4_PA_I2S1, SZ_256),
+	[1] = DEFINE_RES_DMA(DMACH_I2S1_TX),
+	[2] = DEFINE_RES_DMA(DMACH_I2S1_RX),
 };
 
 struct platform_device exynos4_device_i2s1 = {
@@ -138,21 +110,9 @@ struct platform_device exynos4_device_i2s1 = {
 };
 
 static struct resource exynos4_i2s2_resource[] = {
-	[0] = {
-		.start	= EXYNOS4_PA_I2S2,
-		.end	= EXYNOS4_PA_I2S2 + 0x100 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= DMACH_I2S2_TX,
-		.end	= DMACH_I2S2_TX,
-		.flags	= IORESOURCE_DMA,
-	},
-	[2] = {
-		.start	= DMACH_I2S2_RX,
-		.end	= DMACH_I2S2_RX,
-		.flags	= IORESOURCE_DMA,
-	},
+	[0] = DEFINE_RES_MEM(EXYNOS4_PA_I2S2, SZ_256),
+	[1] = DEFINE_RES_DMA(DMACH_I2S2_TX),
+	[2] = DEFINE_RES_DMA(DMACH_I2S2_RX),
 };
 
 struct platform_device exynos4_device_i2s2 = {
@@ -192,21 +152,9 @@ static struct s3c_audio_pdata s3c_pcm_pdata = {
 };
 
 static struct resource exynos4_pcm0_resource[] = {
-	[0] = {
-		.start	= EXYNOS4_PA_PCM0,
-		.end	= EXYNOS4_PA_PCM0 + 0x100 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= DMACH_PCM0_TX,
-		.end	= DMACH_PCM0_TX,
-		.flags	= IORESOURCE_DMA,
-	},
-	[2] = {
-		.start	= DMACH_PCM0_RX,
-		.end	= DMACH_PCM0_RX,
-		.flags	= IORESOURCE_DMA,
-	},
+	[0] = DEFINE_RES_MEM(EXYNOS4_PA_PCM0, SZ_256),
+	[1] = DEFINE_RES_DMA(DMACH_PCM0_TX),
+	[2] = DEFINE_RES_DMA(DMACH_PCM0_RX),
 };
 
 struct platform_device exynos4_device_pcm0 = {
@@ -220,21 +168,9 @@ struct platform_device exynos4_device_pcm0 = {
 };
 
 static struct resource exynos4_pcm1_resource[] = {
-	[0] = {
-		.start	= EXYNOS4_PA_PCM1,
-		.end	= EXYNOS4_PA_PCM1 + 0x100 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= DMACH_PCM1_TX,
-		.end	= DMACH_PCM1_TX,
-		.flags	= IORESOURCE_DMA,
-	},
-	[2] = {
-		.start	= DMACH_PCM1_RX,
-		.end	= DMACH_PCM1_RX,
-		.flags	= IORESOURCE_DMA,
-	},
+	[0] = DEFINE_RES_MEM(EXYNOS4_PA_PCM1, SZ_256),
+	[1] = DEFINE_RES_DMA(DMACH_PCM1_TX),
+	[2] = DEFINE_RES_DMA(DMACH_PCM1_RX),
 };
 
 struct platform_device exynos4_device_pcm1 = {
@@ -248,21 +184,9 @@ struct platform_device exynos4_device_pcm1 = {
 };
 
 static struct resource exynos4_pcm2_resource[] = {
-	[0] = {
-		.start	= EXYNOS4_PA_PCM2,
-		.end	= EXYNOS4_PA_PCM2 + 0x100 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= DMACH_PCM2_TX,
-		.end	= DMACH_PCM2_TX,
-		.flags	= IORESOURCE_DMA,
-	},
-	[2] = {
-		.start	= DMACH_PCM2_RX,
-		.end	= DMACH_PCM2_RX,
-		.flags	= IORESOURCE_DMA,
-	},
+	[0] = DEFINE_RES_MEM(EXYNOS4_PA_PCM2, SZ_256),
+	[1] = DEFINE_RES_DMA(DMACH_PCM2_TX),
+	[2] = DEFINE_RES_DMA(DMACH_PCM2_RX),
 };
 
 struct platform_device exynos4_device_pcm2 = {
@@ -283,31 +207,11 @@ static int exynos4_ac97_cfg_gpio(struct platform_device *pdev)
 }
 
 static struct resource exynos4_ac97_resource[] = {
-	[0] = {
-		.start	= EXYNOS4_PA_AC97,
-		.end	= EXYNOS4_PA_AC97 + 0x100 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= DMACH_AC97_PCMOUT,
-		.end	= DMACH_AC97_PCMOUT,
-		.flags	= IORESOURCE_DMA,
-	},
-	[2] = {
-		.start	= DMACH_AC97_PCMIN,
-		.end	= DMACH_AC97_PCMIN,
-		.flags	= IORESOURCE_DMA,
-	},
-	[3] = {
-		.start	= DMACH_AC97_MICIN,
-		.end	= DMACH_AC97_MICIN,
-		.flags	= IORESOURCE_DMA,
-	},
-	[4] = {
-		.start	= EXYNOS4_IRQ_AC97,
-		.end	= EXYNOS4_IRQ_AC97,
-		.flags	= IORESOURCE_IRQ,
-	},
+	[0] = DEFINE_RES_MEM(EXYNOS4_PA_AC97, SZ_256),
+	[1] = DEFINE_RES_DMA(DMACH_AC97_PCMOUT),
+	[2] = DEFINE_RES_DMA(DMACH_AC97_PCMIN),
+	[3] = DEFINE_RES_DMA(DMACH_AC97_MICIN),
+	[4] = DEFINE_RES_IRQ(EXYNOS4_IRQ_AC97),
 };
 
 static struct s3c_audio_pdata s3c_ac97_pdata = {
@@ -338,16 +242,8 @@ static int exynos4_spdif_cfg_gpio(struct platform_device *pdev)
 }
 
 static struct resource exynos4_spdif_resource[] = {
-	[0] = {
-		.start	= EXYNOS4_PA_SPDIF,
-		.end	= EXYNOS4_PA_SPDIF + 0x100 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= DMACH_SPDIF,
-		.end	= DMACH_SPDIF,
-		.flags	= IORESOURCE_DMA,
-	},
+	[0] = DEFINE_RES_MEM(EXYNOS4_PA_SPDIF, SZ_256),
+	[1] = DEFINE_RES_DMA(DMACH_SPDIF),
 };
 
 static struct s3c_audio_pdata samsung_spdif_pdata = {

arch/arm/mach-exynos/dev-dwmci.c

@@ -16,6 +16,7 @@
 #include <linux/dma-mapping.h>
 #include <linux/platform_device.h>
 #include <linux/interrupt.h>
+#include <linux/ioport.h>
 #include <linux/mmc/dw_mmc.h>
 
 #include <plat/devs.h>
@@ -33,16 +34,8 @@ static int exynos4_dwmci_init(u32 slot_id, irq_handler_t handler, void *data)
 }
 
 static struct resource exynos4_dwmci_resource[] = {
-	[0] = {
-		.start	= EXYNOS4_PA_DWMCI,
-		.end	= EXYNOS4_PA_DWMCI + SZ_4K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_DWMCI,
-		.end	= IRQ_DWMCI,
-		.flags	= IORESOURCE_IRQ,
-	}
+	[0] = DEFINE_RES_MEM(EXYNOS4_PA_DWMCI, SZ_4K),
+	[1] = DEFINE_RES_IRQ(EXYNOS4_IRQ_DWMCI),
 };
 
 static struct dw_mci_board exynos4_dwci_pdata = {

arch/arm/mach-exynos/mach-armlex4210.c

@@ -118,16 +118,9 @@ static void __init armlex4210_wlan_init(void)
 }
 
 static struct resource armlex4210_smsc911x_resources[] = {
-	[0] = {
-		.start	= EXYNOS4_PA_SROM_BANK(3),
-		.end	= EXYNOS4_PA_SROM_BANK(3) + SZ_64K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_EINT(27),
-		.end	= IRQ_EINT(27),
-		.flags	= IORESOURCE_IRQ | IRQF_TRIGGER_HIGH,
-	},
+	[0] = DEFINE_RES_MEM(EXYNOS4_PA_SROM_BANK(3), SZ_64K),
+	[1] = DEFINE_RES_NAMED(IRQ_EINT(27), 1, NULL, IORESOURCE_IRQ \
+					| IRQF_TRIGGER_HIGH),
 };
 
 static struct smsc911x_platform_config smsc9215_config = {

arch/arm/mach-exynos/mach-nuri.c

@@ -112,6 +112,7 @@ static struct s3c_sdhci_platdata nuri_hsmmc0_data __initdata = {
 	.host_caps		= (MMC_CAP_8_BIT_DATA | MMC_CAP_4_BIT_DATA |
 				MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED |
 				MMC_CAP_ERASE),
+	.host_caps2		= MMC_CAP2_BROKEN_VOLTAGE,
 	.cd_type		= S3C_SDHCI_CD_PERMANENT,
 };
 

arch/arm/mach-exynos/mach-smdkv310.c

@@ -179,16 +179,9 @@ static struct s3c_fb_platdata smdkv310_lcd0_pdata __initdata = {
 };
 
 static struct resource smdkv310_smsc911x_resources[] = {
-	[0] = {
-		.start	= EXYNOS4_PA_SROM_BANK(1),
-		.end	= EXYNOS4_PA_SROM_BANK(1) + SZ_64K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_EINT(5),
-		.end	= IRQ_EINT(5),
-		.flags	= IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
-	},
+	[0] = DEFINE_RES_MEM(EXYNOS4_PA_SROM_BANK(1), SZ_64K),
+	[1] = DEFINE_RES_NAMED(IRQ_EINT(5), 1, NULL, IORESOURCE_IRQ \
+						| IRQF_TRIGGER_LOW),
 };
 
 static struct smsc911x_platform_config smsc9215_config = {

arch/arm/mach-exynos/mach-universal_c210.c

@@ -747,6 +747,7 @@ static struct s3c_sdhci_platdata universal_hsmmc0_data __initdata = {
 	.max_width		= 8,
 	.host_caps		= (MMC_CAP_8_BIT_DATA | MMC_CAP_4_BIT_DATA |
 				MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED),
+	.host_caps2		= MMC_CAP2_BROKEN_VOLTAGE,
 	.cd_type		= S3C_SDHCI_CD_PERMANENT,
 };
 

arch/arm/mach-imx/imx27-dt.c

@@ -35,7 +35,7 @@ static const struct of_dev_auxdata imx27_auxdata_lookup[] __initconst = {
 static int __init imx27_avic_add_irq_domain(struct device_node *np,
 				struct device_node *interrupt_parent)
 {
-	irq_domain_add_simple(np, 0);
+	irq_domain_add_legacy(np, 64, 0, 0, &irq_domain_simple_ops, NULL);
 	return 0;
 }
 
@@ -44,7 +44,9 @@ static int __init imx27_gpio_add_irq_domain(struct device_node *np,
 {
 	static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS;
 
-	irq_domain_add_simple(np, gpio_irq_base);
+	gpio_irq_base -= 32;
+	irq_domain_add_legacy(np, 32, gpio_irq_base, 0, &irq_domain_simple_ops,
+				NULL);
 
 	return 0;
 }

arch/arm/mach-imx/mm-imx5.c

@@ -35,7 +35,7 @@ static void imx5_idle(void)
 	}
 	clk_enable(gpc_dvfs_clk);
 	mx5_cpu_lp_set(WAIT_UNCLOCKED_POWER_OFF);
-	if (tzic_enable_wake() != 0)
+	if (!tzic_enable_wake())
 		cpu_do_idle();
 	clk_disable(gpc_dvfs_clk);
 }

arch/arm/mach-msm/board-msm8x60.c

@@ -17,6 +17,7 @@
 #include <linux/irqdomain.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
+#include <linux/of_irq.h>
 #include <linux/of_platform.h>
 #include <linux/memblock.h>
 
@@ -49,10 +50,22 @@ static void __init msm8x60_map_io(void)
 	msm_map_msm8x60_io();
 }
 
+#ifdef CONFIG_OF
+static struct of_device_id msm_dt_gic_match[] __initdata = {
+	{ .compatible = "qcom,msm-8660-qgic", .data = gic_of_init },
+	{}
+};
+#endif
+
 static void __init msm8x60_init_irq(void)
 {
-	gic_init(0, GIC_PPI_START, MSM_QGIC_DIST_BASE,
-		 (void *)MSM_QGIC_CPU_BASE);
+	if (!of_have_populated_dt())
+		gic_init(0, GIC_PPI_START, MSM_QGIC_DIST_BASE,
+			 (void *)MSM_QGIC_CPU_BASE);
+#ifdef CONFIG_OF
+	else
+		of_irq_init(msm_dt_gic_match);
+#endif
 
 	/* Edge trigger PPIs except AVS_SVICINT and AVS_SVICINTSWDONE */
 	writel(0xFFFFD7FF, MSM_QGIC_DIST_BASE + GIC_DIST_CONFIG + 4);
@@ -73,16 +86,8 @@ static struct of_dev_auxdata msm_auxdata_lookup[] __initdata = {
 	{}
 };
 
-static struct of_device_id msm_dt_gic_match[] __initdata = {
-	{ .compatible = "qcom,msm-8660-qgic", },
-	{}
-};
-
 static void __init msm8x60_dt_init(void)
 {
-	irq_domain_generate_simple(msm_dt_gic_match, MSM8X60_QGIC_DIST_PHYS,
-				GIC_SPI_START);
-
 	if (of_machine_is_compatible("qcom,msm8660-surf")) {
 		printk(KERN_INFO "Init surf UART registers\n");
 		msm8x60_init_uart12dm();

arch/arm/mach-omap1/mux.c

@@ -27,6 +27,7 @@
 #include <linux/io.h>
 #include <linux/spinlock.h>
 
+#include <mach/hardware.h>
 
 #include <plat/mux.h>
 

arch/arm/mach-omap1/timer.c

@@ -47,9 +47,9 @@ static int omap1_dm_timer_set_src(struct platform_device *pdev,
 	int n = (pdev->id - 1) << 1;
 	u32 l;
 
-	l = __raw_readl(MOD_CONF_CTRL_1) & ~(0x03 << n);
+	l = omap_readl(MOD_CONF_CTRL_1) & ~(0x03 << n);
 	l |= source << n;
-	__raw_writel(l, MOD_CONF_CTRL_1);
+	omap_writel(l, MOD_CONF_CTRL_1);
 
 	return 0;
 }

arch/arm/mach-omap2/board-4430sdp.c

@@ -20,6 +20,7 @@
 #include <linux/usb/otg.h>
 #include <linux/spi/spi.h>
 #include <linux/i2c/twl.h>
+#include <linux/mfd/twl6040.h>
 #include <linux/gpio_keys.h>
 #include <linux/regulator/machine.h>
 #include <linux/regulator/fixed.h>
@@ -560,7 +561,7 @@ static struct regulator_init_data sdp4430_vusim = {
 	},
 };
 
-static struct twl4030_codec_data twl6040_codec = {
+static struct twl6040_codec_data twl6040_codec = {
 	/* single-step ramp for headset and handsfree */
 	.hs_left_step	= 0x0f,
 	.hs_right_step	= 0x0f,
@@ -568,7 +569,7 @@ static struct twl4030_codec_data twl6040_codec = {
 	.hf_right_step	= 0x1d,
 };
 
-static struct twl4030_vibra_data twl6040_vibra = {
+static struct twl6040_vibra_data twl6040_vibra = {
 	.vibldrv_res = 8,
 	.vibrdrv_res = 3,
 	.viblmotor_res = 10,
@@ -577,16 +578,14 @@ static struct twl4030_vibra_data twl6040_vibra = {
 	.vddvibr_uV = 0,	/* fixed volt supply - VBAT */
 };
 
-static struct twl4030_audio_data twl6040_audio = {
+static struct twl6040_platform_data twl6040_data = {
 	.codec		= &twl6040_codec,
 	.vibra		= &twl6040_vibra,
 	.audpwron_gpio	= 127,
-	.naudint_irq	= OMAP44XX_IRQ_SYS_2N,
 	.irq_base	= TWL6040_CODEC_IRQ_BASE,
 };
 
 static struct twl4030_platform_data sdp4430_twldata = {
-	.audio		= &twl6040_audio,
 	/* Regulators */
 	.vusim		= &sdp4430_vusim,
 	.vaux1		= &sdp4430_vaux1,
@@ -617,7 +616,8 @@ static int __init omap4_i2c_init(void)
 			TWL_COMMON_REGULATOR_VCXIO |
 			TWL_COMMON_REGULATOR_VUSB |
 			TWL_COMMON_REGULATOR_CLK32KG);
-	omap4_pmic_init("twl6030", &sdp4430_twldata);
+	omap4_pmic_init("twl6030", &sdp4430_twldata,
+			&twl6040_data, OMAP44XX_IRQ_SYS_2N);
 	omap_register_i2c_bus(2, 400, NULL, 0);
 	omap_register_i2c_bus(3, 400, sdp4430_i2c_3_boardinfo,
 				ARRAY_SIZE(sdp4430_i2c_3_boardinfo));

arch/arm/mach-omap2/board-generic.c

@@ -137,7 +137,7 @@ static struct twl4030_platform_data sdp4430_twldata = {
 
 static void __init omap4_i2c_init(void)
 {
-	omap4_pmic_init("twl6030", &sdp4430_twldata);
+	omap4_pmic_init("twl6030", &sdp4430_twldata, NULL, 0);
 }
 
 static void __init omap4_init(void)

arch/arm/mach-omap2/board-omap4panda.c

@@ -25,6 +25,7 @@
 #include <linux/gpio.h>
 #include <linux/usb/otg.h>
 #include <linux/i2c/twl.h>
+#include <linux/mfd/twl6040.h>
 #include <linux/regulator/machine.h>
 #include <linux/regulator/fixed.h>
 #include <linux/wl12xx.h>
@@ -284,7 +285,7 @@ static int __init omap4_twl6030_hsmmc_init(struct omap2_hsmmc_info *controllers)
 	return 0;
 }
 
-static struct twl4030_codec_data twl6040_codec = {
+static struct twl6040_codec_data twl6040_codec = {
 	/* single-step ramp for headset and handsfree */
 	.hs_left_step	= 0x0f,
 	.hs_right_step	= 0x0f,
@@ -292,17 +293,14 @@ static struct twl4030_codec_data twl6040_codec = {
 	.hf_right_step	= 0x1d,
 };
 
-static struct twl4030_audio_data twl6040_audio = {
+static struct twl6040_platform_data twl6040_data = {
 	.codec		= &twl6040_codec,
 	.audpwron_gpio	= 127,
-	.naudint_irq	= OMAP44XX_IRQ_SYS_2N,
 	.irq_base	= TWL6040_CODEC_IRQ_BASE,
 };
 
 /* Panda board uses the common PMIC configuration */
-static struct twl4030_platform_data omap4_panda_twldata = {
-	.audio		= &twl6040_audio,
-};
+static struct twl4030_platform_data omap4_panda_twldata;
 
 /*
  * Display monitor features are burnt in their EEPROM as EDID data. The EEPROM
@@ -326,7 +324,8 @@ static int __init omap4_panda_i2c_init(void)
 			TWL_COMMON_REGULATOR_VCXIO |
 			TWL_COMMON_REGULATOR_VUSB |
 			TWL_COMMON_REGULATOR_CLK32KG);
-	omap4_pmic_init("twl6030", &omap4_panda_twldata);
+	omap4_pmic_init("twl6030", &omap4_panda_twldata,
+			&twl6040_data, OMAP44XX_IRQ_SYS_2N);
 	omap_register_i2c_bus(2, 400, NULL, 0);
 	/*
 	 * Bus 3 is attached to the DVI port where devices like the pico DLP

arch/arm/mach-omap2/omap_hwmod.c

@@ -1422,6 +1422,9 @@ static int _ocp_softreset(struct omap_hwmod *oh)
 		goto dis_opt_clks;
 	_write_sysconfig(v, oh);
 
+	if (oh->class->sysc->srst_udelay)
+		udelay(oh->class->sysc->srst_udelay);
+
 	if (oh->class->sysc->sysc_flags & SYSS_HAS_RESET_STATUS)
 		omap_test_timeout((omap_hwmod_read(oh,
 						    oh->class->sysc->syss_offs)
@@ -1903,10 +1906,20 @@ void omap_hwmod_write(u32 v, struct omap_hwmod *oh, u16 reg_offs)
  */
 int omap_hwmod_softreset(struct omap_hwmod *oh)
 {
-	if (!oh)
+	u32 v;
+	int ret;
+
+	if (!oh || !(oh->_sysc_cache))
 		return -EINVAL;
 
-	return _ocp_softreset(oh);
+	v = oh->_sysc_cache;
+	ret = _set_softreset(oh, &v);
+	if (ret)
+		goto error;
+	_write_sysconfig(v, oh);
+
+error:
+	return ret;
 }
 
 /**

arch/arm/mach-omap2/omap_hwmod_2420_data.c

@@ -1000,7 +1000,6 @@ static struct omap_hwmod_ocp_if omap2420_l4_core__dss_venc = {
 			.flags	= OMAP_FIREWALL_L4,
 		}
 	},
-	.flags		= OCPIF_SWSUP_IDLE,
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 

arch/arm/mach-omap2/omap_hwmod_2430_data.c

@@ -1049,7 +1049,6 @@ static struct omap_hwmod_ocp_if omap2430_l4_core__dss_venc = {
 	.slave		= &omap2430_dss_venc_hwmod,
 	.clk		= "dss_ick",
 	.addr		= omap2_dss_venc_addrs,
-	.flags		= OCPIF_SWSUP_IDLE,
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 

arch/arm/mach-omap2/omap_hwmod_3xxx_data.c

@@ -1676,7 +1676,6 @@ static struct omap_hwmod_ocp_if omap3xxx_l4_core__dss_venc = {
 			.flags	= OMAP_FIREWALL_L4,
 		}
 	},
-	.flags		= OCPIF_SWSUP_IDLE,
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 

arch/arm/mach-omap2/omap_hwmod_44xx_data.c

@@ -2594,6 +2594,15 @@ static struct omap_hwmod omap44xx_ipu_hwmod = {
 static struct omap_hwmod_class_sysconfig omap44xx_iss_sysc = {
 	.rev_offs	= 0x0000,
 	.sysc_offs	= 0x0010,
+	/*
+	 * ISS needs 100 OCP clk cycles delay after a softreset before
+	 * accessing sysconfig again.
+	 * The lowest frequency at the moment for L3 bus is 100 MHz, so
+	 * 1usec delay is needed. Add an x2 margin to be safe (2 usecs).
+	 *
+	 * TODO: Indicate errata when available.
+	 */
+	.srst_udelay	= 2,
 	.sysc_flags	= (SYSC_HAS_MIDLEMODE | SYSC_HAS_RESET_STATUS |
 			   SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET),
 	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |

arch/arm/mach-omap2/serial.c

@@ -108,8 +108,14 @@ static void omap_uart_set_noidle(struct platform_device *pdev)
 static void omap_uart_set_smartidle(struct platform_device *pdev)
 {
 	struct omap_device *od = to_omap_device(pdev);
+	u8 idlemode;
 
-	omap_hwmod_set_slave_idlemode(od->hwmods[0], HWMOD_IDLEMODE_SMART);
+	if (od->hwmods[0]->class->sysc->idlemodes & SIDLE_SMART_WKUP)
+		idlemode = HWMOD_IDLEMODE_SMART_WKUP;
+	else
+		idlemode = HWMOD_IDLEMODE_SMART;
+
+	omap_hwmod_set_slave_idlemode(od->hwmods[0], idlemode);
 }
 
 #else
@@ -120,124 +126,8 @@ static void omap_uart_set_smartidle(struct platform_device *pdev) {}
 #endif /* CONFIG_PM */
 
 #ifdef CONFIG_OMAP_MUX
-static struct omap_device_pad default_uart1_pads[] __initdata = {
-	{
-		.name	= "uart1_cts.uart1_cts",
-		.enable	= OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0,
-	},
-	{
-		.name	= "uart1_rts.uart1_rts",
-		.enable	= OMAP_PIN_OUTPUT | OMAP_MUX_MODE0,
-	},
-	{
-		.name	= "uart1_tx.uart1_tx",
-		.enable	= OMAP_PIN_OUTPUT | OMAP_MUX_MODE0,
-	},
-	{
-		.name	= "uart1_rx.uart1_rx",
-		.flags	= OMAP_DEVICE_PAD_REMUX | OMAP_DEVICE_PAD_WAKEUP,
-		.enable	= OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0,
-		.idle	= OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0,
-	},
-};
-
-static struct omap_device_pad default_uart2_pads[] __initdata = {
-	{
-		.name	= "uart2_cts.uart2_cts",
-		.enable	= OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0,
-	},
-	{
-		.name	= "uart2_rts.uart2_rts",
-		.enable	= OMAP_PIN_OUTPUT | OMAP_MUX_MODE0,
-	},
-	{
-		.name	= "uart2_tx.uart2_tx",
-		.enable	= OMAP_PIN_OUTPUT | OMAP_MUX_MODE0,
-	},
-	{
-		.name	= "uart2_rx.uart2_rx",
-		.flags	= OMAP_DEVICE_PAD_REMUX | OMAP_DEVICE_PAD_WAKEUP,
-		.enable	= OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0,
-		.idle	= OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0,
-	},
-};
-
-static struct omap_device_pad default_uart3_pads[] __initdata = {
-	{
-		.name	= "uart3_cts_rctx.uart3_cts_rctx",
-		.enable	= OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0,
-	},
-	{
-		.name	= "uart3_rts_sd.uart3_rts_sd",
-		.enable	= OMAP_PIN_OUTPUT | OMAP_MUX_MODE0,
-	},
-	{
-		.name	= "uart3_tx_irtx.uart3_tx_irtx",
-		.enable	= OMAP_PIN_OUTPUT | OMAP_MUX_MODE0,
-	},
-	{
-		.name	= "uart3_rx_irrx.uart3_rx_irrx",
-		.flags	= OMAP_DEVICE_PAD_REMUX | OMAP_DEVICE_PAD_WAKEUP,
-		.enable	= OMAP_PIN_INPUT | OMAP_MUX_MODE0,
-		.idle	= OMAP_PIN_INPUT | OMAP_MUX_MODE0,
-	},
-};
-
-static struct omap_device_pad default_omap36xx_uart4_pads[] __initdata = {
-	{
-		.name   = "gpmc_wait2.uart4_tx",
-		.enable = OMAP_PIN_OUTPUT | OMAP_MUX_MODE0,
-	},
-	{
-		.name	= "gpmc_wait3.uart4_rx",
-		.flags	= OMAP_DEVICE_PAD_REMUX | OMAP_DEVICE_PAD_WAKEUP,
-		.enable	= OMAP_PIN_INPUT | OMAP_MUX_MODE2,
-		.idle	= OMAP_PIN_INPUT | OMAP_MUX_MODE2,
-	},
-};
-
-static struct omap_device_pad default_omap4_uart4_pads[] __initdata = {
-	{
-		.name	= "uart4_tx.uart4_tx",
-		.enable	= OMAP_PIN_OUTPUT | OMAP_MUX_MODE0,
-	},
-	{
-		.name	= "uart4_rx.uart4_rx",
-		.flags	= OMAP_DEVICE_PAD_REMUX | OMAP_DEVICE_PAD_WAKEUP,
-		.enable	= OMAP_PIN_INPUT | OMAP_MUX_MODE0,
-		.idle	= OMAP_PIN_INPUT | OMAP_MUX_MODE0,
-	},
-};
-
 static void omap_serial_fill_default_pads(struct omap_board_data *bdata)
 {
-	switch (bdata->id) {
-	case 0:
-		bdata->pads = default_uart1_pads;
-		bdata->pads_cnt = ARRAY_SIZE(default_uart1_pads);
-		break;
-	case 1:
-		bdata->pads = default_uart2_pads;
-		bdata->pads_cnt = ARRAY_SIZE(default_uart2_pads);
-		break;
-	case 2:
-		bdata->pads = default_uart3_pads;
-		bdata->pads_cnt = ARRAY_SIZE(default_uart3_pads);
-		break;
-	case 3:
-		if (cpu_is_omap44xx()) {
-			bdata->pads = default_omap4_uart4_pads;
-			bdata->pads_cnt =
-				ARRAY_SIZE(default_omap4_uart4_pads);
-		} else if (cpu_is_omap3630()) {
-			bdata->pads = default_omap36xx_uart4_pads;
-			bdata->pads_cnt =
-				ARRAY_SIZE(default_omap36xx_uart4_pads);
-		}
-		break;
-	default:
-		break;
-	}
 }
 #else
 static void omap_serial_fill_default_pads(struct omap_board_data *bdata) {}

arch/arm/mach-omap2/twl-common.c

@@ -37,6 +37,16 @@ static struct i2c_board_info __initdata pmic_i2c_board_info = {
 	.flags		= I2C_CLIENT_WAKE,
 };
 
+static struct i2c_board_info __initdata omap4_i2c1_board_info[] = {
+	{
+		.addr		= 0x48,
+		.flags		= I2C_CLIENT_WAKE,
+	},
+	{
+		I2C_BOARD_INFO("twl6040", 0x4b),
+	},
+};
+
 void __init omap_pmic_init(int bus, u32 clkrate,
 			   const char *pmic_type, int pmic_irq,
 			   struct twl4030_platform_data *pmic_data)
@@ -49,14 +59,31 @@ void __init omap_pmic_init(int bus, u32 clkrate,
 	omap_register_i2c_bus(bus, clkrate, &pmic_i2c_board_info, 1);
 }
 
+void __init omap4_pmic_init(const char *pmic_type,
+		    struct twl4030_platform_data *pmic_data,
+		    struct twl6040_platform_data *twl6040_data, int twl6040_irq)
+{
+	/* PMIC part*/
+	strncpy(omap4_i2c1_board_info[0].type, pmic_type,
+		sizeof(omap4_i2c1_board_info[0].type));
+	omap4_i2c1_board_info[0].irq = OMAP44XX_IRQ_SYS_1N;
+	omap4_i2c1_board_info[0].platform_data = pmic_data;
+
+	/* TWL6040 audio IC part */
+	omap4_i2c1_board_info[1].irq = twl6040_irq;
+	omap4_i2c1_board_info[1].platform_data = twl6040_data;
+
+	omap_register_i2c_bus(1, 400, omap4_i2c1_board_info, 2);
+
+}
+
 void __init omap_pmic_late_init(void)
 {
 	/* Init the OMAP TWL parameters (if PMIC has been registerd) */
-	if (!pmic_i2c_board_info.irq)
-		return;
-
-	omap3_twl_init();
-	omap4_twl_init();
+	if (pmic_i2c_board_info.irq)
+		omap3_twl_init();
+	if (omap4_i2c1_board_info[0].irq)
+		omap4_twl_init();
 }
 
 #if defined(CONFIG_ARCH_OMAP3)

arch/arm/mach-omap2/twl-common.h

@@ -29,6 +29,7 @@
 
 
 struct twl4030_platform_data;
+struct twl6040_platform_data;
 
 void omap_pmic_init(int bus, u32 clkrate, const char *pmic_type, int pmic_irq,
 		    struct twl4030_platform_data *pmic_data);
@@ -46,12 +47,9 @@ static inline void omap3_pmic_init(const char *pmic_type,
 	omap_pmic_init(1, 2600, pmic_type, INT_34XX_SYS_NIRQ, pmic_data);
 }
 
-static inline void omap4_pmic_init(const char *pmic_type,
-				   struct twl4030_platform_data *pmic_data)
-{
-	/* Phoenix Audio IC needs I2C1 to start with 400 KHz or less */
-	omap_pmic_init(1, 400, pmic_type, OMAP44XX_IRQ_SYS_1N, pmic_data);
-}
+void omap4_pmic_init(const char *pmic_type,
+		    struct twl4030_platform_data *pmic_data,
+		    struct twl6040_platform_data *audio_data, int twl6040_irq);
 
 void omap3_pmic_get_config(struct twl4030_platform_data *pmic_data,
 			   u32 pdata_flags, u32 regulators_flags);

arch/arm/mach-pxa/include/mach/mfp-pxa2xx.h

@@ -17,6 +17,7 @@
  *
  * bit     23 - Input/Output (PXA2xx specific)
  * bit     24 - Wakeup Enable(PXA2xx specific)
+ * bit     25 - Keep Output  (PXA2xx specific)
  */
 
 #define MFP_DIR_IN		(0x0 << 23)
@@ -25,6 +26,12 @@
 #define MFP_DIR(x)		(((x) >> 23) & 0x1)
 
 #define MFP_LPM_CAN_WAKEUP	(0x1 << 24)
+
+/*
+ * MFP_LPM_KEEP_OUTPUT must be specified for pins that need to
+ * retain their last output level (low or high).
+ * Note: MFP_LPM_KEEP_OUTPUT has no effect on pins configured for input.
+ */
 #define MFP_LPM_KEEP_OUTPUT	(0x1 << 25)
 
 #define WAKEUP_ON_EDGE_RISE	(MFP_LPM_CAN_WAKEUP | MFP_LPM_EDGE_RISE)

arch/arm/mach-pxa/mfp-pxa2xx.c

@@ -33,6 +33,8 @@
 #define BANK_OFF(n)	(((n) < 3) ? (n) << 2 : 0x100 + (((n) - 3) << 2))
 #define GPLR(x)		__REG2(0x40E00000, BANK_OFF((x) >> 5))
 #define GPDR(x)		__REG2(0x40E00000, BANK_OFF((x) >> 5) + 0x0c)
+#define GPSR(x)		__REG2(0x40E00000, BANK_OFF((x) >> 5) + 0x18)
+#define GPCR(x)		__REG2(0x40E00000, BANK_OFF((x) >> 5) + 0x24)
 
 #define PWER_WE35	(1 << 24)
 
@@ -348,6 +350,7 @@ static inline void pxa27x_mfp_init(void) {}
 #ifdef CONFIG_PM
 static unsigned long saved_gafr[2][4];
 static unsigned long saved_gpdr[4];
+static unsigned long saved_gplr[4];
 static unsigned long saved_pgsr[4];
 
 static int pxa2xx_mfp_suspend(void)
@@ -366,14 +369,26 @@ static int pxa2xx_mfp_suspend(void)
 	}
 
 	for (i = 0; i <= gpio_to_bank(pxa_last_gpio); i++) {
-
 		saved_gafr[0][i] = GAFR_L(i);
 		saved_gafr[1][i] = GAFR_U(i);
 		saved_gpdr[i] = GPDR(i * 32);
+		saved_gplr[i] = GPLR(i * 32);
 		saved_pgsr[i] = PGSR(i);
 
-		GPDR(i * 32) = gpdr_lpm[i];
+		GPSR(i * 32) = PGSR(i);
+		GPCR(i * 32) = ~PGSR(i);
+	}
+
+	/* set GPDR bits taking into account MFP_LPM_KEEP_OUTPUT */
+	for (i = 0; i < pxa_last_gpio; i++) {
+		if ((gpdr_lpm[gpio_to_bank(i)] & GPIO_bit(i)) ||
+		    ((gpio_desc[i].config & MFP_LPM_KEEP_OUTPUT) &&
+		     (saved_gpdr[gpio_to_bank(i)] & GPIO_bit(i))))
+			GPDR(i) |= GPIO_bit(i);
+		else
+			GPDR(i) &= ~GPIO_bit(i);
 	}
+
 	return 0;
 }
 
@@ -384,6 +399,8 @@ static void pxa2xx_mfp_resume(void)
 	for (i = 0; i <= gpio_to_bank(pxa_last_gpio); i++) {
 		GAFR_L(i) = saved_gafr[0][i];
 		GAFR_U(i) = saved_gafr[1][i];
+		GPSR(i * 32) = saved_gplr[i];
+		GPCR(i * 32) = ~saved_gplr[i];
 		GPDR(i * 32) = saved_gpdr[i];
 		PGSR(i) = saved_pgsr[i];
 	}

arch/arm/mach-pxa/pxa27x.c

@@ -421,8 +421,11 @@ void __init pxa27x_set_i2c_power_info(struct i2c_pxa_platform_data *info)
 	pxa_register_device(&pxa27x_device_i2c_power, info);
 }
 
+static struct pxa_gpio_platform_data pxa27x_gpio_info __initdata = {
+	.gpio_set_wake = gpio_set_wake,
+};
+
 static struct platform_device *devices[] __initdata = {
-	&pxa_device_gpio,
 	&pxa27x_device_udc,
 	&pxa_device_pmu,
 	&pxa_device_i2s,
@@ -458,6 +461,7 @@ static int __init pxa27x_init(void)
 		register_syscore_ops(&pxa2xx_mfp_syscore_ops);
 		register_syscore_ops(&pxa2xx_clock_syscore_ops);
 
+		pxa_register_device(&pxa_device_gpio, &pxa27x_gpio_info);
 		ret = platform_add_devices(devices, ARRAY_SIZE(devices));
 	}
 

arch/arm/mach-s3c24xx/Kconfig

@@ -111,10 +111,6 @@ config S3C24XX_SETUP_TS
 	help
 	  Compile in platform device definition for Samsung TouchScreen.
 
-# cpu-specific sections
-
-if CPU_S3C2410
-
 config S3C2410_DMA
 	bool
 	depends on S3C24XX_DMA && (CPU_S3C2410 || CPU_S3C2442)
@@ -127,6 +123,10 @@ config S3C2410_PM
 	help
 	  Power Management code common to S3C2410 and better
 
+# cpu-specific sections
+
+if CPU_S3C2410
+
 config S3C24XX_SIMTEC_NOR
 	bool
 	help

arch/arm/mach-s3c24xx/bast-ide.c

@@ -37,21 +37,9 @@ static struct pata_platform_info bast_ide_platdata = {
 #define IDE_CS	S3C2410_CS5
 
 static struct resource bast_ide0_resource[] = {
-	[0]	= {
-		.start	= IDE_CS + BAST_PA_IDEPRI,
-		.end	= IDE_CS + BAST_PA_IDEPRI + (8 * 0x20) - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1]	= {
-		.start	= IDE_CS + BAST_PA_IDEPRIAUX + (6 * 0x20) ,
-		.end	= IDE_CS + BAST_PA_IDEPRIAUX + (7 * 0x20) - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[2]	= {
-		.start	= IRQ_IDE0,
-		.end	= IRQ_IDE0,
-		.flags	= IORESOURCE_IRQ,
-	},
+	[0] = DEFINE_RES_MEM(IDE_CS + BAST_PA_IDEPRI, 8 * 0x20),
+	[1] = DEFINE_RES_MEM(IDE_CS + BAST_PA_IDEPRIAUX + (6 * 0x20), 0x20),
+	[2] = DEFINE_RES_IRQ(IRQ_IDE0),
 };
 
 static struct platform_device bast_device_ide0 = {
@@ -67,21 +55,9 @@ static struct platform_device bast_device_ide0 = {
 };
 
 static struct resource bast_ide1_resource[] = {
-	[0]	= {
-		.start	= IDE_CS + BAST_PA_IDESEC,
-		.end	= IDE_CS + BAST_PA_IDESEC + (8 * 0x20) - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1]	= {
-		.start	= IDE_CS + BAST_PA_IDESECAUX + (6 * 0x20),
-		.end	= IDE_CS + BAST_PA_IDESECAUX + (7 * 0x20) - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[2]	= {
-		.start	= IRQ_IDE1,
-		.end	= IRQ_IDE1,
-		.flags	= IORESOURCE_IRQ,
-	},
+	[0] = DEFINE_RES_MEM(IDE_CS + BAST_PA_IDESEC, 8 * 0x20),
+	[1] = DEFINE_RES_MEM(IDE_CS + BAST_PA_IDESECAUX + (6 * 0x20), 0x20),
+	[2] = DEFINE_RES_IRQ(IRQ_IDE1),
 };
 
 static struct platform_device bast_device_ide1 = {

arch/arm/mach-s3c24xx/mach-amlm5900.c

@@ -65,13 +65,8 @@
 
 #include "common.h"
 
-static struct resource amlm5900_nor_resource = {
-		.start = 0x00000000,
-		.end   = 0x01000000 - 1,
-		.flags = IORESOURCE_MEM,
-};
-
-
+static struct resource amlm5900_nor_resource =
+			DEFINE_RES_MEM(0x00000000, SZ_16M);
 
 static struct mtd_partition amlm5900_mtd_partitions[] = {
 	{

arch/arm/mach-s3c24xx/mach-anubis.c

@@ -235,19 +235,9 @@ static struct pata_platform_info anubis_ide_platdata = {
 };
 
 static struct resource anubis_ide0_resource[] = {
-	{
-		.start	= S3C2410_CS3,
-		.end	= S3C2410_CS3 + (8*32) - 1,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= S3C2410_CS3 + (1<<26) + (6*32),
-		.end	= S3C2410_CS3 + (1<<26) + (7*32) - 1,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= IRQ_IDE0,
-		.end	= IRQ_IDE0,
-		.flags	= IORESOURCE_IRQ,
-	},
+	[0] = DEFINE_RES_MEM(S3C2410_CS3, 8 * 32),
+	[2] = DEFINE_RES_MEM(S3C2410_CS3 + (1 << 26) + (6 * 32), 32),
+	[3] = DEFINE_RES_IRQ(IRQ_IDE0),
 };
 
 static struct platform_device anubis_device_ide0 = {
@@ -262,19 +252,9 @@ static struct platform_device anubis_device_ide0 = {
 };
 
 static struct resource anubis_ide1_resource[] = {
-	{
-		.start	= S3C2410_CS4,
-		.end	= S3C2410_CS4 + (8*32) - 1,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= S3C2410_CS4 + (1<<26) + (6*32),
-		.end	= S3C2410_CS4 + (1<<26) + (7*32) - 1,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= IRQ_IDE0,
-		.end	= IRQ_IDE0,
-		.flags	= IORESOURCE_IRQ,
-	},
+	[0] = DEFINE_RES_MEM(S3C2410_CS4, 8 * 32),
+	[1] = DEFINE_RES_MEM(S3C2410_CS4 + (1 << 26) + (6 * 32), 32),
+	[2] = DEFINE_RES_IRQ(IRQ_IDE0),
 };
 
 static struct platform_device anubis_device_ide1 = {
@@ -298,16 +278,8 @@ static struct ax_plat_data anubis_asix_platdata = {
 };
 
 static struct resource anubis_asix_resource[] = {
-	[0] = {
-		.start = S3C2410_CS5,
-		.end   = S3C2410_CS5 + (0x20 * 0x20) -1,
-		.flags = IORESOURCE_MEM
-	},
-	[1] = {
-		.start = IRQ_ASIX,
-		.end   = IRQ_ASIX,
-		.flags = IORESOURCE_IRQ
-	}
+	[0] = DEFINE_RES_MEM(S3C2410_CS5, 0x20 * 0x20),
+	[1] = DEFINE_RES_IRQ(IRQ_ASIX),
 };
 
 static struct platform_device anubis_device_asix = {
@@ -323,21 +295,9 @@ static struct platform_device anubis_device_asix = {
 /* SM501 */
 
 static struct resource anubis_sm501_resource[] = {
-	[0] = {
-		.start	= S3C2410_CS2,
-		.end	= S3C2410_CS2 + SZ_8M,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= S3C2410_CS2 + SZ_64M - SZ_2M,
-		.end	= S3C2410_CS2 + SZ_64M - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[2] = {
-		.start	= IRQ_EINT0,
-		.end	= IRQ_EINT0,
-		.flags	= IORESOURCE_IRQ,
-	},
+	[0] = DEFINE_RES_MEM(S3C2410_CS2, SZ_8M),
+	[1] = DEFINE_RES_MEM(S3C2410_CS2 + SZ_64M - SZ_2M, SZ_2M),
+	[2] = DEFINE_RES_IRQ(IRQ_EINT0),
 };
 
 static struct sm501_initdata anubis_sm501_initdata = {

arch/arm/mach-s3c24xx/mach-at2440evb.c

@@ -118,21 +118,10 @@ static struct s3c2410_platform_nand __initdata at2440evb_nand_info = {
 /* DM9000AEP 10/100 ethernet controller */
 
 static struct resource at2440evb_dm9k_resource[] = {
-	[0] = {
-		.start = S3C2410_CS3,
-		.end   = S3C2410_CS3 + 3,
-		.flags = IORESOURCE_MEM
-	},
-	[1] = {
-		.start = S3C2410_CS3 + 4,
-		.end   = S3C2410_CS3 + 7,
-		.flags = IORESOURCE_MEM
-	},
-	[2] = {
-		.start = IRQ_EINT7,
-		.end   = IRQ_EINT7,
-		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
-	}
+	[0] = DEFINE_RES_MEM(S3C2410_CS3, 4),
+	[1] = DEFINE_RES_MEM(S3C2410_CS3 + 4, 4),
+	[2] = DEFINE_RES_NAMED(IRQ_EINT7, 1, NULL, IORESOURCE_IRQ \
+					| IORESOURCE_IRQ_HIGHEDGE),
 };
 
 static struct dm9000_plat_data at2440evb_dm9k_pdata = {

arch/arm/mach-s3c24xx/mach-bast.c

@@ -310,22 +310,10 @@ static struct s3c2410_platform_nand __initdata bast_nand_info = {
 /* DM9000 */
 
 static struct resource bast_dm9k_resource[] = {
-	[0] = {
-		.start = S3C2410_CS5 + BAST_PA_DM9000,
-		.end   = S3C2410_CS5 + BAST_PA_DM9000 + 3,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = S3C2410_CS5 + BAST_PA_DM9000 + 0x40,
-		.end   = S3C2410_CS5 + BAST_PA_DM9000 + 0x40 + 0x3f,
-		.flags = IORESOURCE_MEM,
-	},
-	[2] = {
-		.start = IRQ_DM9000,
-		.end   = IRQ_DM9000,
-		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
-	}
-
+	[0] = DEFINE_RES_MEM(S3C2410_CS5 + BAST_PA_DM9000, 4),
+	[1] = DEFINE_RES_MEM(S3C2410_CS5 + BAST_PA_DM9000 + 0x40, 0x40),
+	[2] = DEFINE_RES_NAMED(IRQ_DM9000 , 1, NULL, IORESOURCE_IRQ \
+					| IORESOURCE_IRQ_HIGHLEVEL),
 };
 
 /* for the moment we limit ourselves to 16bit IO until some
@@ -400,21 +388,9 @@ static struct ax_plat_data bast_asix_platdata = {
 };
 
 static struct resource bast_asix_resource[] = {
-	[0] = {
-		.start = S3C2410_CS5 + BAST_PA_ASIXNET,
-		.end   = S3C2410_CS5 + BAST_PA_ASIXNET + (0x18 * 0x20) - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = S3C2410_CS5 + BAST_PA_ASIXNET + (0x1f * 0x20),
-		.end   = S3C2410_CS5 + BAST_PA_ASIXNET + (0x1f * 0x20),
-		.flags = IORESOURCE_MEM,
-	},
-	[2] = {
-		.start = IRQ_ASIX,
-		.end   = IRQ_ASIX,
-		.flags = IORESOURCE_IRQ
-	}
+	[0] = DEFINE_RES_MEM(S3C2410_CS5 + BAST_PA_ASIXNET, 0x18 * 0x20),
+	[1] = DEFINE_RES_MEM(S3C2410_CS5 + BAST_PA_ASIXNET + (0x1f * 0x20), 1),
+	[2] = DEFINE_RES_IRQ(IRQ_ASIX),
 };
 
 static struct platform_device bast_device_asix = {
@@ -430,11 +406,8 @@ static struct platform_device bast_device_asix = {
 /* Asix AX88796 10/100 ethernet controller parallel port */
 
 static struct resource bast_asixpp_resource[] = {
-	[0] = {
-		.start = S3C2410_CS5 + BAST_PA_ASIXNET + (0x18 * 0x20),
-		.end   = S3C2410_CS5 + BAST_PA_ASIXNET + (0x1b * 0x20) - 1,
-		.flags = IORESOURCE_MEM,
-	}
+	[0] = DEFINE_RES_MEM(S3C2410_CS5 + BAST_PA_ASIXNET + (0x18 * 0x20), \
+					0x30 * 0x20),
 };
 
 static struct platform_device bast_device_axpp = {

arch/arm/mach-s3c24xx/mach-gta02.c

@@ -387,11 +387,8 @@ static struct physmap_flash_data gta02_nor_flash_data = {
 	.width		= 2,
 };
 
-static struct resource gta02_nor_flash_resource = {
-	.start		= GTA02_FLASH_BASE,
-	.end		= GTA02_FLASH_BASE + GTA02_FLASH_SIZE - 1,
-	.flags		= IORESOURCE_MEM,
-};
+static struct resource gta02_nor_flash_resource =
+	DEFINE_RES_MEM(GTA02_FLASH_BASE, GTA02_FLASH_SIZE);
 
 static struct platform_device gta02_nor_flash = {
 	.name		= "physmap-flash",

arch/arm/mach-s3c24xx/mach-h1940.c

@@ -253,13 +253,8 @@ static struct pda_power_pdata power_supply_info = {
 };
 
 static struct resource power_supply_resources[] = {
-	[0] = {
-			.name	= "ac",
-			.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE |
-					  IORESOURCE_IRQ_HIGHEDGE,
-			.start	= IRQ_EINT2,
-			.end	= IRQ_EINT2,
-	},
+	[0] = DEFINE_RES_NAMED(IRQ_EINT2, 1, "ac", IORESOURCE_IRQ \
+			| IORESOURCE_IRQ_LOWEDGE | IORESOURCE_IRQ_HIGHEDGE),
 };
 
 static struct platform_device power_supply = {

arch/arm/mach-s3c24xx/mach-mini2440.c

@@ -292,21 +292,10 @@ static struct s3c2410_platform_nand mini2440_nand_info __initdata = {
 /* DM9000AEP 10/100 ethernet controller */
 
 static struct resource mini2440_dm9k_resource[] = {
-	[0] = {
-		.start = MACH_MINI2440_DM9K_BASE,
-		.end   = MACH_MINI2440_DM9K_BASE + 3,
-		.flags = IORESOURCE_MEM
-	},
-	[1] = {
-		.start = MACH_MINI2440_DM9K_BASE + 4,
-		.end   = MACH_MINI2440_DM9K_BASE + 7,
-		.flags = IORESOURCE_MEM
-	},
-	[2] = {
-		.start = IRQ_EINT7,
-		.end   = IRQ_EINT7,
-		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
-	}
+	[0] = DEFINE_RES_MEM(MACH_MINI2440_DM9K_BASE, 4),
+	[1] = DEFINE_RES_MEM(MACH_MINI2440_DM9K_BASE + 4, 4),
+	[2] = DEFINE_RES_NAMED(IRQ_EINT7, 1, NULL, IORESOURCE_IRQ \
+						| IORESOURCE_IRQ_HIGHEDGE),
 };
 
 /*

arch/arm/mach-s3c24xx/mach-nexcoder.c

@@ -84,11 +84,7 @@ static struct s3c2410_uartcfg nexcoder_uartcfgs[] __initdata = {
 /* NOR Flash on NexVision NexCoder 2440 board */
 
 static struct resource nexcoder_nor_resource[] = {
-	[0] = {
-		.start = S3C2410_CS0,
-		.end   = S3C2410_CS0 + (8*1024*1024) - 1,
-		.flags = IORESOURCE_MEM,
-	}
+	[0] = DEFINE_RES_MEM(S3C2410_CS0, SZ_8M),
 };
 
 static struct map_info nexcoder_nor_map = {

arch/arm/mach-s3c24xx/mach-osiris.c

@@ -244,16 +244,8 @@ static struct s3c2410_platform_nand __initdata osiris_nand_info = {
 /* PCMCIA control and configuration */
 
 static struct resource osiris_pcmcia_resource[] = {
-	[0] = {
-		.start	= 0x0f000000,
-		.end	= 0x0f100000,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= 0x0c000000,
-		.end	= 0x0c100000,
-		.flags	= IORESOURCE_MEM,
-	}
+	[0] = DEFINE_RES_MEM(0x0f000000, SZ_1M),
+	[1] = DEFINE_RES_MEM(0x0c000000, SZ_1M),
 };
 
 static struct platform_device osiris_pcmcia = {

arch/arm/mach-s3c24xx/mach-otom.c

@@ -77,11 +77,7 @@ static struct s3c2410_uartcfg otom11_uartcfgs[] __initdata = {
 /* NOR Flash on NexVision OTOM board */
 
 static struct resource otom_nor_resource[] = {
-	[0] = {
-		.start = S3C2410_CS0,
-		.end   = S3C2410_CS0 + (4*1024*1024) - 1,
-		.flags = IORESOURCE_MEM,
-	}
+	[0] = DEFINE_RES_MEM(S3C2410_CS0, SZ_4M),
 };
 
 static struct platform_device otom_device_nor = {

arch/arm/mach-s3c24xx/mach-qt2410.c

@@ -180,16 +180,8 @@ static struct s3c2410fb_mach_info qt2410_fb_info __initdata = {
 /* CS8900 */
 
 static struct resource qt2410_cs89x0_resources[] = {
-	[0] = {
-		.start	= 0x19000000,
-		.end	= 0x19000000 + 16,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_EINT9,
-		.end	= IRQ_EINT9,
-		.flags	= IORESOURCE_IRQ,
-	},
+	[0] = DEFINE_RES_MEM(0x19000000, 17),
+	[1] = DEFINE_RES_IRQ(IRQ_EINT9),
 };
 
 static struct platform_device qt2410_cs89x0 = {

arch/arm/mach-s3c24xx/mach-rx1950.c

@@ -152,13 +152,8 @@ static struct pda_power_pdata power_supply_info = {
 };
 
 static struct resource power_supply_resources[] = {
-	[0] = {
-			.name	= "ac",
-			.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE |
-					  IORESOURCE_IRQ_HIGHEDGE,
-			.start	= IRQ_EINT2,
-			.end	= IRQ_EINT2,
-	},
+	[0] = DEFINE_RES_NAMED(IRQ_EINT2, 1, "ac", IORESOURCE_IRQ \
+			| IORESOURCE_IRQ_LOWEDGE | IORESOURCE_IRQ_HIGHEDGE),
 };
 
 static struct platform_device power_supply = {

arch/arm/mach-s3c24xx/mach-tct_hammer.c

@@ -56,11 +56,8 @@
 
 #include "common.h"
 
-static struct resource tct_hammer_nor_resource = {
-		.start = 0x00000000,
-		.end   = 0x01000000 - 1,
-		.flags = IORESOURCE_MEM,
-};
+static struct resource tct_hammer_nor_resource =
+			DEFINE_RES_MEM(0x00000000, SZ_16M);
 
 static struct mtd_partition tct_hammer_mtd_partitions[] = {
 	{

arch/arm/mach-s3c24xx/mach-vr1000.c

@@ -187,40 +187,17 @@ static struct platform_device serial_device = {
 /* DM9000 ethernet devices */
 
 static struct resource vr1000_dm9k0_resource[] = {
-	[0] = {
-		.start = S3C2410_CS5 + VR1000_PA_DM9000,
-		.end   = S3C2410_CS5 + VR1000_PA_DM9000 + 3,
-		.flags = IORESOURCE_MEM
-	},
-	[1] = {
-		.start = S3C2410_CS5 + VR1000_PA_DM9000 + 0x40,
-		.end   = S3C2410_CS5 + VR1000_PA_DM9000 + 0x7f,
-		.flags = IORESOURCE_MEM
-	},
-	[2] = {
-		.start = IRQ_VR1000_DM9000A,
-		.end   = IRQ_VR1000_DM9000A,
-		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
-	}
-
+	[0] = DEFINE_RES_MEM(S3C2410_CS5 + VR1000_PA_DM9000, 4),
+	[1] = DEFINE_RES_MEM(S3C2410_CS5 + VR1000_PA_DM9000 + 0x40, 0x40),
+	[2] = DEFINE_RES_NAMED(IRQ_VR1000_DM9000A, 1, NULL, IORESOURCE_IRQ \
+						| IORESOURCE_IRQ_HIGHLEVEL),
 };
 
 static struct resource vr1000_dm9k1_resource[] = {
-	[0] = {
-		.start = S3C2410_CS5 + VR1000_PA_DM9000 + 0x80,
-		.end   = S3C2410_CS5 + VR1000_PA_DM9000 + 0x83,
-		.flags = IORESOURCE_MEM
-	},
-	[1] = {
-		.start = S3C2410_CS5 + VR1000_PA_DM9000 + 0xC0,
-		.end   = S3C2410_CS5 + VR1000_PA_DM9000 + 0xFF,
-		.flags = IORESOURCE_MEM
-	},
-	[2] = {
-		.start = IRQ_VR1000_DM9000N,
-		.end   = IRQ_VR1000_DM9000N,
-		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
-	}
+	[0] = DEFINE_RES_MEM(S3C2410_CS5 + VR1000_PA_DM9000 + 0x80, 4),
+	[1] = DEFINE_RES_MEM(S3C2410_CS5 + VR1000_PA_DM9000 + 0xC0, 0x40),
+	[2] = DEFINE_RES_NAMED(IRQ_VR1000_DM9000N, 1, NULL, IORESOURCE_IRQ \
+						| IORESOURCE_IRQ_HIGHLEVEL),
 };
 
 /* for the moment we limit ourselves to 16bit IO until some

arch/arm/mach-s3c24xx/simtec-nor.c

@@ -55,11 +55,7 @@ static struct physmap_flash_data simtec_nor_pdata = {
 };
 
 static struct resource simtec_nor_resource[] = {
-	[0] = {
-		.start = S3C2410_CS1 + 0x4000000,
-		.end   = S3C2410_CS1 + 0x4000000 + SZ_8M - 1,
-		.flags = IORESOURCE_MEM,
-	}
+	[0] = DEFINE_RES_MEM(S3C2410_CS1 + 0x4000000, SZ_8M),
 };
 
 static struct platform_device simtec_device_nor = {

arch/arm/mach-s3c64xx/dev-audio.c

@@ -57,21 +57,9 @@ static int s3c64xx_i2s_cfg_gpio(struct platform_device *pdev)
 }
 
 static struct resource s3c64xx_iis0_resource[] = {
-	[0] = {
-		.start = S3C64XX_PA_IIS0,
-		.end   = S3C64XX_PA_IIS0 + 0x100 - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = DMACH_I2S0_OUT,
-		.end   = DMACH_I2S0_OUT,
-		.flags = IORESOURCE_DMA,
-	},
-	[2] = {
-		.start = DMACH_I2S0_IN,
-		.end   = DMACH_I2S0_IN,
-		.flags = IORESOURCE_DMA,
-	},
+	[0] = DEFINE_RES_MEM(S3C64XX_PA_IIS0, SZ_256),
+	[1] = DEFINE_RES_DMA(DMACH_I2S0_OUT),
+	[2] = DEFINE_RES_DMA(DMACH_I2S0_IN),
 };
 
 static struct s3c_audio_pdata i2sv3_pdata = {
@@ -95,21 +83,9 @@ struct platform_device s3c64xx_device_iis0 = {
 EXPORT_SYMBOL(s3c64xx_device_iis0);
 
 static struct resource s3c64xx_iis1_resource[] = {
-	[0] = {
-		.start = S3C64XX_PA_IIS1,
-		.end   = S3C64XX_PA_IIS1 + 0x100 - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = DMACH_I2S1_OUT,
-		.end   = DMACH_I2S1_OUT,
-		.flags = IORESOURCE_DMA,
-	},
-	[2] = {
-		.start = DMACH_I2S1_IN,
-		.end   = DMACH_I2S1_IN,
-		.flags = IORESOURCE_DMA,
-	},
+	[0] = DEFINE_RES_MEM(S3C64XX_PA_IIS1, SZ_256),
+	[1] = DEFINE_RES_DMA(DMACH_I2S1_OUT),
+	[2] = DEFINE_RES_DMA(DMACH_I2S1_IN),
 };
 
 struct platform_device s3c64xx_device_iis1 = {
@@ -124,21 +100,9 @@ struct platform_device s3c64xx_device_iis1 = {
 EXPORT_SYMBOL(s3c64xx_device_iis1);
 
 static struct resource s3c64xx_iisv4_resource[] = {
-	[0] = {
-		.start = S3C64XX_PA_IISV4,
-		.end   = S3C64XX_PA_IISV4 + 0x100 - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = DMACH_HSI_I2SV40_TX,
-		.end   = DMACH_HSI_I2SV40_TX,
-		.flags = IORESOURCE_DMA,
-	},
-	[2] = {
-		.start = DMACH_HSI_I2SV40_RX,
-		.end   = DMACH_HSI_I2SV40_RX,
-		.flags = IORESOURCE_DMA,
-	},
+	[0] = DEFINE_RES_MEM(S3C64XX_PA_IISV4, SZ_256),
+	[1] = DEFINE_RES_DMA(DMACH_HSI_I2SV40_TX),
+	[2] = DEFINE_RES_DMA(DMACH_HSI_I2SV40_RX),
 };
 
 static struct s3c_audio_pdata i2sv4_pdata = {
@@ -187,21 +151,9 @@ static int s3c64xx_pcm_cfg_gpio(struct platform_device *pdev)
 }
 
 static struct resource s3c64xx_pcm0_resource[] = {
-	[0] = {
-		.start = S3C64XX_PA_PCM0,
-		.end   = S3C64XX_PA_PCM0 + 0x100 - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = DMACH_PCM0_TX,
-		.end   = DMACH_PCM0_TX,
-		.flags = IORESOURCE_DMA,
-	},
-	[2] = {
-		.start = DMACH_PCM0_RX,
-		.end   = DMACH_PCM0_RX,
-		.flags = IORESOURCE_DMA,
-	},
+	[0] = DEFINE_RES_MEM(S3C64XX_PA_PCM0, SZ_256),
+	[1] = DEFINE_RES_DMA(DMACH_PCM0_TX),
+	[2] = DEFINE_RES_DMA(DMACH_PCM0_RX),
 };
 
 static struct s3c_audio_pdata s3c_pcm0_pdata = {
@@ -220,21 +172,9 @@ struct platform_device s3c64xx_device_pcm0 = {
 EXPORT_SYMBOL(s3c64xx_device_pcm0);
 
 static struct resource s3c64xx_pcm1_resource[] = {
-	[0] = {
-		.start = S3C64XX_PA_PCM1,
-		.end   = S3C64XX_PA_PCM1 + 0x100 - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = DMACH_PCM1_TX,
-		.end   = DMACH_PCM1_TX,
-		.flags = IORESOURCE_DMA,
-	},
-	[2] = {
-		.start = DMACH_PCM1_RX,
-		.end   = DMACH_PCM1_RX,
-		.flags = IORESOURCE_DMA,
-	},
+	[0] = DEFINE_RES_MEM(S3C64XX_PA_PCM1, SZ_256),
+	[1] = DEFINE_RES_DMA(DMACH_PCM1_TX),
+	[2] = DEFINE_RES_DMA(DMACH_PCM1_RX),
 };
 
 static struct s3c_audio_pdata s3c_pcm1_pdata = {
@@ -265,31 +205,11 @@ static int s3c64xx_ac97_cfg_gpe(struct platform_device *pdev)
 }
 
 static struct resource s3c64xx_ac97_resource[] = {
-	[0] = {
-		.start = S3C64XX_PA_AC97,
-		.end   = S3C64XX_PA_AC97 + 0x100 - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = DMACH_AC97_PCMOUT,
-		.end   = DMACH_AC97_PCMOUT,
-		.flags = IORESOURCE_DMA,
-	},
-	[2] = {
-		.start = DMACH_AC97_PCMIN,
-		.end   = DMACH_AC97_PCMIN,
-		.flags = IORESOURCE_DMA,
-	},
-	[3] = {
-		.start = DMACH_AC97_MICIN,
-		.end   = DMACH_AC97_MICIN,
-		.flags = IORESOURCE_DMA,
-	},
-	[4] = {
-		.start = IRQ_AC97,
-		.end   = IRQ_AC97,
-		.flags = IORESOURCE_IRQ,
-	},
+	[0] = DEFINE_RES_MEM(S3C64XX_PA_AC97, SZ_256),
+	[1] = DEFINE_RES_DMA(DMACH_AC97_PCMOUT),
+	[2] = DEFINE_RES_DMA(DMACH_AC97_PCMIN),
+	[3] = DEFINE_RES_DMA(DMACH_AC97_MICIN),
+	[4] = DEFINE_RES_IRQ(IRQ_AC97),
 };
 
 static struct s3c_audio_pdata s3c_ac97_pdata;

arch/arm/mach-s3c64xx/dev-uart.c

@@ -31,55 +31,23 @@
 /* 64xx uarts are closer together */
 
 static struct resource s3c64xx_uart0_resource[] = {
-	[0] = {
-		.start	= S3C_PA_UART0,
-		.end	= S3C_PA_UART0 + 0x100,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_UART0,
-		.end	= IRQ_UART0,
-		.flags	= IORESOURCE_IRQ,
-	},
+	[0] = DEFINE_RES_MEM(S3C_PA_UART0, SZ_256),
+	[1] = DEFINE_RES_IRQ(IRQ_UART0),
 };
 
 static struct resource s3c64xx_uart1_resource[] = {
-	[0] = {
-		.start = S3C_PA_UART1,
-		.end   = S3C_PA_UART1 + 0x100,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_UART1,
-		.end	= IRQ_UART1,
-		.flags	= IORESOURCE_IRQ,
-	},
+	[0] = DEFINE_RES_MEM(S3C_PA_UART1, SZ_256),
+	[1] = DEFINE_RES_IRQ(IRQ_UART1),
 };
 
 static struct resource s3c6xx_uart2_resource[] = {
-	[0] = {
-		.start = S3C_PA_UART2,
-		.end   = S3C_PA_UART2 + 0x100,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_UART2,
-		.end	= IRQ_UART2,
-		.flags	= IORESOURCE_IRQ,
-	},
+	[0] = DEFINE_RES_MEM(S3C_PA_UART2, SZ_256),
+	[1] = DEFINE_RES_IRQ(IRQ_UART2),
 };
 
 static struct resource s3c64xx_uart3_resource[] = {
-	[0] = {
-		.start = S3C_PA_UART3,
-		.end   = S3C_PA_UART3 + 0x100,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_UART3,
-		.end	= IRQ_UART3,
-		.flags	= IORESOURCE_IRQ,
-	},
+	[0] = DEFINE_RES_MEM(S3C_PA_UART3, SZ_256),
+	[1] = DEFINE_RES_IRQ(IRQ_UART3),
 };
 
 

arch/arm/mach-s3c64xx/mach-anw6410.c

@@ -165,21 +165,10 @@ static void __init anw6410_dm9000_enable(void)
 }
 
 static struct resource anw6410_dm9000_resource[] = {
-	[0] = {
-		.start = ANW6410_PA_DM9000,
-		.end   = ANW6410_PA_DM9000 + 3,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = ANW6410_PA_DM9000 + 4,
-		.end   = ANW6410_PA_DM9000 + 4 + 500,
-		.flags = IORESOURCE_MEM,
-	},
-	[2] = {
-		.start = IRQ_EINT(15),
-		.end   = IRQ_EINT(15),
-		.flags = IORESOURCE_IRQ | IRQF_TRIGGER_HIGH,
-	},
+	[0] = DEFINE_RES_MEM(ANW6410_PA_DM9000, 4),
+	[1] = DEFINE_RES_MEM(ANW6410_PA_DM9000 + 4, 501),
+	[2] = DEFINE_RES_NAMED(IRQ_EINT(15), 1, NULL, IORESOURCE_IRQ \
+					| IRQF_TRIGGER_HIGH),
 };
 
 static struct dm9000_plat_data anw6410_dm9000_pdata = {

arch/arm/mach-s3c64xx/mach-crag6410.c

@@ -232,21 +232,10 @@ static struct platform_device crag6410_gpio_keydev = {
 };
 
 static struct resource crag6410_dm9k_resource[] = {
-	[0] = {
-		.start	= S3C64XX_PA_XM0CSN5,
-		.end	= S3C64XX_PA_XM0CSN5 + 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= S3C64XX_PA_XM0CSN5 + (1 << 8),
-		.end	= S3C64XX_PA_XM0CSN5 + (1 << 8) + 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[2] = {
-		.start	= S3C_EINT(17),
-		.end	= S3C_EINT(17),
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
-	},
+	[0] = DEFINE_RES_MEM(S3C64XX_PA_XM0CSN5, 2),
+	[1] = DEFINE_RES_MEM(S3C64XX_PA_XM0CSN5 + (1 << 8), 2),
+	[2] = DEFINE_RES_NAMED(S3C_EINT(17), 1, NULL, IORESOURCE_IRQ \
+				| IORESOURCE_IRQ_HIGHLEVEL),
 };
 
 static struct dm9000_plat_data mini6410_dm9k_pdata = {
@@ -262,12 +251,7 @@ static struct platform_device crag6410_dm9k_device = {
 };
 
 static struct resource crag6410_mmgpio_resource[] = {
-	[0] = {
-		.name	= "dat",
-		.start	= S3C64XX_PA_XM0CSN4 + 1,
-		.end	= S3C64XX_PA_XM0CSN4 + 1,
-		.flags	= IORESOURCE_MEM,
-	},
+	[0] = DEFINE_RES_MEM_NAMED(S3C64XX_PA_XM0CSN4, 1, "dat"),
 };
 
 static struct platform_device crag6410_mmgpio = {

arch/arm/mach-s3c64xx/mach-mini6410.c

@@ -85,21 +85,10 @@ static struct s3c2410_uartcfg mini6410_uartcfgs[] __initdata = {
 /* DM9000AEP 10/100 ethernet controller */
 
 static struct resource mini6410_dm9k_resource[] = {
-	[0] = {
-		.start	= S3C64XX_PA_XM0CSN1,
-		.end	= S3C64XX_PA_XM0CSN1 + 1,
-		.flags	= IORESOURCE_MEM
-	},
-	[1] = {
-		.start	= S3C64XX_PA_XM0CSN1 + 4,
-		.end	= S3C64XX_PA_XM0CSN1 + 5,
-		.flags	= IORESOURCE_MEM
-	},
-	[2] = {
-		.start	= S3C_EINT(7),
-		.end	= S3C_EINT(7),
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL
-	}
+	[0] = DEFINE_RES_MEM(S3C64XX_PA_XM0CSN1, 2),
+	[1] = DEFINE_RES_MEM(S3C64XX_PA_XM0CSN1 + 4, 2),
+	[2] = DEFINE_RES_NAMED(S3C_EINT(7), 1, NULL, IORESOURCE_IRQ \
+					| IORESOURCE_IRQ_HIGHLEVEL),
 };
 
 static struct dm9000_plat_data mini6410_dm9k_pdata = {

arch/arm/mach-s3c64xx/mach-real6410.c

@@ -86,21 +86,10 @@ static struct s3c2410_uartcfg real6410_uartcfgs[] __initdata = {
 /* DM9000AEP 10/100 ethernet controller */
 
 static struct resource real6410_dm9k_resource[] = {
-	[0] = {
-		.start	= S3C64XX_PA_XM0CSN1,
-		.end	= S3C64XX_PA_XM0CSN1 + 1,
-		.flags	= IORESOURCE_MEM
-	},
-	[1] = {
-		.start	= S3C64XX_PA_XM0CSN1 + 4,
-		.end	= S3C64XX_PA_XM0CSN1 + 5,
-		.flags	= IORESOURCE_MEM
-	},
-	[2] = {
-		.start	= S3C_EINT(7),
-		.end	= S3C_EINT(7),
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL
-	}
+	[0] = DEFINE_RES_MEM(S3C64XX_PA_XM0CSN1, 2),
+	[1] = DEFINE_RES_MEM(S3C64XX_PA_XM0CSN1 + 4, 2),
+	[2] = DEFINE_RES_NAMED(S3C_EINT(7), 1, NULL, IORESOURCE_IRQ \
+					| IORESOURCE_IRQ_HIGHLEVEL),
 };
 
 static struct dm9000_plat_data real6410_dm9k_pdata = {

arch/arm/mach-s3c64xx/mach-smdk6410.c

@@ -182,16 +182,9 @@ static struct s3c_fb_platdata smdk6410_lcd_pdata __initdata = {
  */
 
 static struct resource smdk6410_smsc911x_resources[] = {
-	[0] = {
-		.start = S3C64XX_PA_XM0CSN1,
-		.end   = S3C64XX_PA_XM0CSN1 + SZ_64K - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = S3C_EINT(10),
-		.end   = S3C_EINT(10),
-		.flags = IORESOURCE_IRQ | IRQ_TYPE_LEVEL_LOW,
-	},
+	[0] = DEFINE_RES_MEM(S3C64XX_PA_XM0CSN1, SZ_64K),
+	[1] = DEFINE_RES_NAMED(S3C_EINT(10), 1, NULL, IORESOURCE_IRQ \
+					| IRQ_TYPE_LEVEL_LOW),
 };
 
 static struct smsc911x_platform_config smdk6410_smsc911x_pdata = {

arch/arm/mach-s5p64x0/dev-audio.c

@@ -51,21 +51,9 @@ static struct s3c_audio_pdata s5p6440_i2s_pdata = {
 };
 
 static struct resource s5p64x0_i2s0_resource[] = {
-	[0] = {
-		.start	= S5P64X0_PA_I2S,
-		.end	= S5P64X0_PA_I2S + 0x100 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= DMACH_I2S0_TX,
-		.end	= DMACH_I2S0_TX,
-		.flags	= IORESOURCE_DMA,
-	},
-	[2] = {
-		.start	= DMACH_I2S0_RX,
-		.end	= DMACH_I2S0_RX,
-		.flags	= IORESOURCE_DMA,
-	},
+	[0] = DEFINE_RES_MEM(S5P64X0_PA_I2S, SZ_256),
+	[1] = DEFINE_RES_DMA(DMACH_I2S0_TX),
+	[2] = DEFINE_RES_DMA(DMACH_I2S0_RX),
 };
 
 struct platform_device s5p6440_device_iis = {
@@ -130,21 +118,9 @@ static struct s3c_audio_pdata s5p6450_i2s_pdata = {
 };
 
 static struct resource s5p6450_i2s1_resource[] = {
-	[0] = {
-		.start	= S5P6450_PA_I2S1,
-		.end	= S5P6450_PA_I2S1 + 0x100 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= DMACH_I2S1_TX,
-		.end	= DMACH_I2S1_TX,
-		.flags	= IORESOURCE_DMA,
-	},
-	[2] = {
-		.start	= DMACH_I2S1_RX,
-		.end	= DMACH_I2S1_RX,
-		.flags	= IORESOURCE_DMA,
-	},
+	[0] = DEFINE_RES_MEM(S5P6450_PA_I2S1, SZ_256),
+	[1] = DEFINE_RES_DMA(DMACH_I2S1_TX),
+	[2] = DEFINE_RES_DMA(DMACH_I2S1_RX),
 };
 
 struct platform_device s5p6450_device_iis1 = {
@@ -158,21 +134,9 @@ struct platform_device s5p6450_device_iis1 = {
 };
 
 static struct resource s5p6450_i2s2_resource[] = {
-	[0] = {
-		.start	= S5P6450_PA_I2S2,
-		.end	= S5P6450_PA_I2S2 + 0x100 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= DMACH_I2S2_TX,
-		.end	= DMACH_I2S2_TX,
-		.flags	= IORESOURCE_DMA,
-	},
-	[2] = {
-		.start	= DMACH_I2S2_RX,
-		.end	= DMACH_I2S2_RX,
-		.flags	= IORESOURCE_DMA,
-	},
+	[0] = DEFINE_RES_MEM(S5P6450_PA_I2S2, SZ_256),
+	[1] = DEFINE_RES_DMA(DMACH_I2S2_TX),
+	[2] = DEFINE_RES_DMA(DMACH_I2S2_RX),
 };
 
 struct platform_device s5p6450_device_iis2 = {
@@ -208,21 +172,9 @@ static struct s3c_audio_pdata s5p6440_pcm_pdata = {
 };
 
 static struct resource s5p6440_pcm0_resource[] = {
-	[0] = {
-		.start	= S5P64X0_PA_PCM,
-		.end	= S5P64X0_PA_PCM + 0x100 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= DMACH_PCM0_TX,
-		.end	= DMACH_PCM0_TX,
-		.flags	= IORESOURCE_DMA,
-	},
-	[2] = {
-		.start	= DMACH_PCM0_RX,
-		.end	= DMACH_PCM0_RX,
-		.flags	= IORESOURCE_DMA,
-	},
+	[0] = DEFINE_RES_MEM(S5P64X0_PA_PCM, SZ_256),
+	[1] = DEFINE_RES_DMA(DMACH_PCM0_TX),
+	[2] = DEFINE_RES_DMA(DMACH_PCM0_RX),
 };
 
 struct platform_device s5p6440_device_pcm = {

arch/arm/mach-s5pc100/dev-audio.c

@@ -56,26 +56,10 @@ static struct s3c_audio_pdata i2sv5_pdata = {
 };
 
 static struct resource s5pc100_iis0_resource[] = {
-	[0] = {
-		.start = S5PC100_PA_I2S0,
-		.end   = S5PC100_PA_I2S0 + 0x100 - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = DMACH_I2S0_TX,
-		.end   = DMACH_I2S0_TX,
-		.flags = IORESOURCE_DMA,
-	},
-	[2] = {
-		.start = DMACH_I2S0_RX,
-		.end   = DMACH_I2S0_RX,
-		.flags = IORESOURCE_DMA,
-	},
-	[3] = {
-		.start = DMACH_I2S0S_TX,
-		.end = DMACH_I2S0S_TX,
-		.flags = IORESOURCE_DMA,
-	},
+	[0] = DEFINE_RES_MEM(S5PC100_PA_I2S0, SZ_256),
+	[1] = DEFINE_RES_DMA(DMACH_I2S0_TX),
+	[2] = DEFINE_RES_DMA(DMACH_I2S0_RX),
+	[3] = DEFINE_RES_DMA(DMACH_I2S0S_TX),
 };
 
 struct platform_device s5pc100_device_iis0 = {
@@ -103,21 +87,9 @@ static struct s3c_audio_pdata i2sv3_pdata = {
 };
 
 static struct resource s5pc100_iis1_resource[] = {
-	[0] = {
-		.start = S5PC100_PA_I2S1,
-		.end   = S5PC100_PA_I2S1 + 0x100 - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = DMACH_I2S1_TX,
-		.end   = DMACH_I2S1_TX,
-		.flags = IORESOURCE_DMA,
-	},
-	[2] = {
-		.start = DMACH_I2S1_RX,
-		.end   = DMACH_I2S1_RX,
-		.flags = IORESOURCE_DMA,
-	},
+	[0] = DEFINE_RES_MEM(S5PC100_PA_I2S1, SZ_256),
+	[1] = DEFINE_RES_DMA(DMACH_I2S1_TX),
+	[2] = DEFINE_RES_DMA(DMACH_I2S1_RX),
 };
 
 struct platform_device s5pc100_device_iis1 = {
@@ -131,21 +103,9 @@ struct platform_device s5pc100_device_iis1 = {
 };
 
 static struct resource s5pc100_iis2_resource[] = {
-	[0] = {
-		.start = S5PC100_PA_I2S2,
-		.end   = S5PC100_PA_I2S2 + 0x100 - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = DMACH_I2S2_TX,
-		.end   = DMACH_I2S2_TX,
-		.flags = IORESOURCE_DMA,
-	},
-	[2] = {
-		.start = DMACH_I2S2_RX,
-		.end   = DMACH_I2S2_RX,
-		.flags = IORESOURCE_DMA,
-	},
+	[0] = DEFINE_RES_MEM(S5PC100_PA_I2S2, SZ_256),
+	[1] = DEFINE_RES_DMA(DMACH_I2S2_TX),
+	[2] = DEFINE_RES_DMA(DMACH_I2S2_RX),
 };
 
 struct platform_device s5pc100_device_iis2 = {
@@ -184,21 +144,9 @@ static struct s3c_audio_pdata s3c_pcm_pdata = {
 };
 
 static struct resource s5pc100_pcm0_resource[] = {
-	[0] = {
-		.start = S5PC100_PA_PCM0,
-		.end   = S5PC100_PA_PCM0 + 0x100 - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = DMACH_PCM0_TX,
-		.end   = DMACH_PCM0_TX,
-		.flags = IORESOURCE_DMA,
-	},
-	[2] = {
-		.start = DMACH_PCM0_RX,
-		.end   = DMACH_PCM0_RX,
-		.flags = IORESOURCE_DMA,
-	},
+	[0] = DEFINE_RES_MEM(S5PC100_PA_PCM0, SZ_256),
+	[1] = DEFINE_RES_DMA(DMACH_PCM0_TX),
+	[2] = DEFINE_RES_DMA(DMACH_PCM0_RX),
 };
 
 struct platform_device s5pc100_device_pcm0 = {
@@ -212,21 +160,9 @@ struct platform_device s5pc100_device_pcm0 = {
 };
 
 static struct resource s5pc100_pcm1_resource[] = {
-	[0] = {
-		.start = S5PC100_PA_PCM1,
-		.end   = S5PC100_PA_PCM1 + 0x100 - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = DMACH_PCM1_TX,
-		.end   = DMACH_PCM1_TX,
-		.flags = IORESOURCE_DMA,
-	},
-	[2] = {
-		.start = DMACH_PCM1_RX,
-		.end   = DMACH_PCM1_RX,
-		.flags = IORESOURCE_DMA,
-	},
+	[0] = DEFINE_RES_MEM(S5PC100_PA_PCM1, SZ_256),
+	[1] = DEFINE_RES_DMA(DMACH_PCM1_TX),
+	[2] = DEFINE_RES_DMA(DMACH_PCM1_RX),
 };
 
 struct platform_device s5pc100_device_pcm1 = {
@@ -247,31 +183,11 @@ static int s5pc100_ac97_cfg_gpio(struct platform_device *pdev)
 }
 
 static struct resource s5pc100_ac97_resource[] = {
-	[0] = {
-		.start = S5PC100_PA_AC97,
-		.end   = S5PC100_PA_AC97 + 0x100 - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = DMACH_AC97_PCMOUT,
-		.end   = DMACH_AC97_PCMOUT,
-		.flags = IORESOURCE_DMA,
-	},
-	[2] = {
-		.start = DMACH_AC97_PCMIN,
-		.end   = DMACH_AC97_PCMIN,
-		.flags = IORESOURCE_DMA,
-	},
-	[3] = {
-		.start = DMACH_AC97_MICIN,
-		.end   = DMACH_AC97_MICIN,
-		.flags = IORESOURCE_DMA,
-	},
-	[4] = {
-		.start = IRQ_AC97,
-		.end   = IRQ_AC97,
-		.flags = IORESOURCE_IRQ,
-	},
+	[0] = DEFINE_RES_MEM(S5PC100_PA_AC97, SZ_256),
+	[1] = DEFINE_RES_DMA(DMACH_AC97_PCMOUT),
+	[2] = DEFINE_RES_DMA(DMACH_AC97_PCMIN),
+	[3] = DEFINE_RES_DMA(DMACH_AC97_MICIN),
+	[4] = DEFINE_RES_IRQ(IRQ_AC97),
 };
 
 static struct s3c_audio_pdata s3c_ac97_pdata = {
@@ -308,16 +224,8 @@ static int s5pc100_spdif_cfg_gpg3(struct platform_device *pdev)
 }
 
 static struct resource s5pc100_spdif_resource[] = {
-	[0] = {
-		.start	= S5PC100_PA_SPDIF,
-		.end	= S5PC100_PA_SPDIF + 0x100 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= DMACH_SPDIF,
-		.end	= DMACH_SPDIF,
-		.flags	= IORESOURCE_DMA,
-	},
+	[0] = DEFINE_RES_MEM(S5PC100_PA_SPDIF, SZ_256),
+	[1] = DEFINE_RES_DMA(DMACH_SPDIF),
 };
 
 static struct s3c_audio_pdata s5p_spdif_pdata = {

arch/arm/mach-s5pv210/dev-audio.c

@@ -59,26 +59,10 @@ static struct s3c_audio_pdata i2sv5_pdata = {
 };
 
 static struct resource s5pv210_iis0_resource[] = {
-	[0] = {
-		.start = S5PV210_PA_IIS0,
-		.end   = S5PV210_PA_IIS0 + 0x100 - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = DMACH_I2S0_TX,
-		.end   = DMACH_I2S0_TX,
-		.flags = IORESOURCE_DMA,
-	},
-	[2] = {
-		.start = DMACH_I2S0_RX,
-		.end   = DMACH_I2S0_RX,
-		.flags = IORESOURCE_DMA,
-	},
-	[3] = {
-		.start = DMACH_I2S0S_TX,
-		.end = DMACH_I2S0S_TX,
-		.flags = IORESOURCE_DMA,
-	},
+	[0] = DEFINE_RES_MEM(S5PV210_PA_IIS0, SZ_256),
+	[1] = DEFINE_RES_DMA(DMACH_I2S0_TX),
+	[2] = DEFINE_RES_DMA(DMACH_I2S0_RX),
+	[3] = DEFINE_RES_DMA(DMACH_I2S0S_TX),
 };
 
 struct platform_device s5pv210_device_iis0 = {
@@ -106,21 +90,9 @@ static struct s3c_audio_pdata i2sv3_pdata = {
 };
 
 static struct resource s5pv210_iis1_resource[] = {
-	[0] = {
-		.start = S5PV210_PA_IIS1,
-		.end   = S5PV210_PA_IIS1 + 0x100 - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = DMACH_I2S1_TX,
-		.end   = DMACH_I2S1_TX,
-		.flags = IORESOURCE_DMA,
-	},
-	[2] = {
-		.start = DMACH_I2S1_RX,
-		.end   = DMACH_I2S1_RX,
-		.flags = IORESOURCE_DMA,
-	},
+	[0] = DEFINE_RES_MEM(S5PV210_PA_IIS1, SZ_256),
+	[1] = DEFINE_RES_DMA(DMACH_I2S1_TX),
+	[2] = DEFINE_RES_DMA(DMACH_I2S1_RX),
 };
 
 struct platform_device s5pv210_device_iis1 = {
@@ -134,21 +106,9 @@ struct platform_device s5pv210_device_iis1 = {
 };
 
 static struct resource s5pv210_iis2_resource[] = {
-	[0] = {
-		.start = S5PV210_PA_IIS2,
-		.end   = S5PV210_PA_IIS2 + 0x100 - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = DMACH_I2S2_TX,
-		.end   = DMACH_I2S2_TX,
-		.flags = IORESOURCE_DMA,
-	},
-	[2] = {
-		.start = DMACH_I2S2_RX,
-		.end   = DMACH_I2S2_RX,
-		.flags = IORESOURCE_DMA,
-	},
+	[0] = DEFINE_RES_MEM(S5PV210_PA_IIS2, SZ_256),
+	[1] = DEFINE_RES_DMA(DMACH_I2S2_TX),
+	[2] = DEFINE_RES_DMA(DMACH_I2S2_RX),
 };
 
 struct platform_device s5pv210_device_iis2 = {
@@ -188,21 +148,9 @@ static struct s3c_audio_pdata s3c_pcm_pdata = {
 };
 
 static struct resource s5pv210_pcm0_resource[] = {
-	[0] = {
-		.start = S5PV210_PA_PCM0,
-		.end   = S5PV210_PA_PCM0 + 0x100 - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = DMACH_PCM0_TX,
-		.end   = DMACH_PCM0_TX,
-		.flags = IORESOURCE_DMA,
-	},
-	[2] = {
-		.start = DMACH_PCM0_RX,
-		.end   = DMACH_PCM0_RX,
-		.flags = IORESOURCE_DMA,
-	},
+	[0] = DEFINE_RES_MEM(S5PV210_PA_PCM0, SZ_256),
+	[1] = DEFINE_RES_DMA(DMACH_PCM0_TX),
+	[2] = DEFINE_RES_DMA(DMACH_PCM0_RX),
 };
 
 struct platform_device s5pv210_device_pcm0 = {
@@ -216,21 +164,9 @@ struct platform_device s5pv210_device_pcm0 = {
 };
 
 static struct resource s5pv210_pcm1_resource[] = {
-	[0] = {
-		.start = S5PV210_PA_PCM1,
-		.end   = S5PV210_PA_PCM1 + 0x100 - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = DMACH_PCM1_TX,
-		.end   = DMACH_PCM1_TX,
-		.flags = IORESOURCE_DMA,
-	},
-	[2] = {
-		.start = DMACH_PCM1_RX,
-		.end   = DMACH_PCM1_RX,
-		.flags = IORESOURCE_DMA,
-	},
+	[0] = DEFINE_RES_MEM(S5PV210_PA_PCM1, SZ_256),
+	[1] = DEFINE_RES_DMA(DMACH_PCM1_TX),
+	[2] = DEFINE_RES_DMA(DMACH_PCM1_RX),
 };
 
 struct platform_device s5pv210_device_pcm1 = {
@@ -244,21 +180,9 @@ struct platform_device s5pv210_device_pcm1 = {
 };
 
 static struct resource s5pv210_pcm2_resource[] = {
-	[0] = {
-		.start = S5PV210_PA_PCM2,
-		.end   = S5PV210_PA_PCM2 + 0x100 - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = DMACH_PCM2_TX,
-		.end   = DMACH_PCM2_TX,
-		.flags = IORESOURCE_DMA,
-	},
-	[2] = {
-		.start = DMACH_PCM2_RX,
-		.end   = DMACH_PCM2_RX,
-		.flags = IORESOURCE_DMA,
-	},
+	[0] = DEFINE_RES_MEM(S5PV210_PA_PCM2, SZ_256),
+	[1] = DEFINE_RES_DMA(DMACH_PCM2_TX),
+	[2] = DEFINE_RES_DMA(DMACH_PCM2_RX),
 };
 
 struct platform_device s5pv210_device_pcm2 = {
@@ -279,31 +203,11 @@ static int s5pv210_ac97_cfg_gpio(struct platform_device *pdev)
 }
 
 static struct resource s5pv210_ac97_resource[] = {
-	[0] = {
-		.start = S5PV210_PA_AC97,
-		.end   = S5PV210_PA_AC97 + 0x100 - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = DMACH_AC97_PCMOUT,
-		.end   = DMACH_AC97_PCMOUT,
-		.flags = IORESOURCE_DMA,
-	},
-	[2] = {
-		.start = DMACH_AC97_PCMIN,
-		.end   = DMACH_AC97_PCMIN,
-		.flags = IORESOURCE_DMA,
-	},
-	[3] = {
-		.start = DMACH_AC97_MICIN,
-		.end   = DMACH_AC97_MICIN,
-		.flags = IORESOURCE_DMA,
-	},
-	[4] = {
-		.start = IRQ_AC97,
-		.end   = IRQ_AC97,
-		.flags = IORESOURCE_IRQ,
-	},
+	[0] = DEFINE_RES_MEM(S5PV210_PA_AC97, SZ_256),
+	[1] = DEFINE_RES_DMA(DMACH_AC97_PCMOUT),
+	[2] = DEFINE_RES_DMA(DMACH_AC97_PCMIN),
+	[3] = DEFINE_RES_DMA(DMACH_AC97_MICIN),
+	[4] = DEFINE_RES_IRQ(IRQ_AC97),
 };
 
 static struct s3c_audio_pdata s3c_ac97_pdata = {
@@ -334,16 +238,8 @@ static int s5pv210_spdif_cfg_gpio(struct platform_device *pdev)
 }
 
 static struct resource s5pv210_spdif_resource[] = {
-	[0] = {
-		.start	= S5PV210_PA_SPDIF,
-		.end	= S5PV210_PA_SPDIF + 0x100 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= DMACH_SPDIF,
-		.end	= DMACH_SPDIF,
-		.flags	= IORESOURCE_DMA,
-	},
+	[0] = DEFINE_RES_MEM(S5PV210_PA_SPDIF, SZ_256),
+	[1] = DEFINE_RES_DMA(DMACH_SPDIF),
 };
 
 static struct s3c_audio_pdata samsung_spdif_pdata = {

arch/arm/mach-s5pv210/mach-goni.c

@@ -25,6 +25,7 @@
 #include <linux/gpio_keys.h>
 #include <linux/input.h>
 #include <linux/gpio.h>
+#include <linux/mmc/host.h>
 #include <linux/interrupt.h>
 
 #include <asm/hardware/vic.h>
@@ -765,6 +766,7 @@ static void __init goni_pmic_init(void)
 /* MoviNAND */
 static struct s3c_sdhci_platdata goni_hsmmc0_data __initdata = {
 	.max_width		= 4,
+	.host_caps2		= MMC_CAP2_BROKEN_VOLTAGE,
 	.cd_type		= S3C_SDHCI_CD_PERMANENT,
 };
 

arch/arm/mach-s5pv210/mach-smdkv210.c

@@ -119,21 +119,10 @@ static struct samsung_keypad_platdata smdkv210_keypad_data __initdata = {
 };
 
 static struct resource smdkv210_dm9000_resources[] = {
-	[0] = {
-		.start	= S5PV210_PA_SROM_BANK5,
-		.end	= S5PV210_PA_SROM_BANK5,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= S5PV210_PA_SROM_BANK5 + 2,
-		.end	= S5PV210_PA_SROM_BANK5 + 2,
-		.flags	= IORESOURCE_MEM,
-	},
-	[2] = {
-		.start	= IRQ_EINT(9),
-		.end	= IRQ_EINT(9),
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
-	},
+	[0] = DEFINE_RES_MEM(S5PV210_PA_SROM_BANK5, 1),
+	[1] = DEFINE_RES_MEM(S5PV210_PA_SROM_BANK5 + 2, 1),
+	[2] = DEFINE_RES_NAMED(IRQ_EINT(9), 1, NULL, IORESOURCE_IRQ \
+				| IORESOURCE_IRQ_HIGHLEVEL),
 };
 
 static struct dm9000_plat_data smdkv210_dm9000_platdata = {

arch/arm/mach-sa1100/generic.c

@@ -306,7 +306,7 @@ void sa11x0_register_irda(struct irda_platform_data *irda)
 }
 
 static struct resource sa1100_rtc_resources[] = {
-	DEFINE_RES_MEM(0x90010000, 0x9001003f),
+	DEFINE_RES_MEM(0x90010000, 0x40),
 	DEFINE_RES_IRQ_NAMED(IRQ_RTC1Hz, "rtc 1Hz"),
 	DEFINE_RES_IRQ_NAMED(IRQ_RTCAlrm, "rtc alarm"),
 };

arch/arm/mach-u300/core.c

@@ -1667,8 +1667,10 @@ void __init u300_init_irq(void)
 
 	for (i = 0; i < U300_VIC_IRQS_END; i++)
 		set_bit(i, (unsigned long *) &mask[0]);
-	vic_init((void __iomem *) U300_INTCON0_VBASE, 0, mask[0], mask[0]);
-	vic_init((void __iomem *) U300_INTCON1_VBASE, 32, mask[1], mask[1]);
+	vic_init((void __iomem *) U300_INTCON0_VBASE, IRQ_U300_INTCON0_START,
+		 mask[0], mask[0]);
+	vic_init((void __iomem *) U300_INTCON1_VBASE, IRQ_U300_INTCON1_START,
+		 mask[1], mask[1]);
 }
 
 

arch/arm/mach-u300/i2c.c

@@ -146,9 +146,6 @@ static struct ab3100_platform_data ab3100_plf_data = {
 				.min_uV = 1800000,
 				.max_uV = 1800000,
 				.valid_modes_mask = REGULATOR_MODE_NORMAL,
-				.valid_ops_mask =
-				REGULATOR_CHANGE_VOLTAGE |
-				REGULATOR_CHANGE_STATUS,
 				.always_on = 1,
 				.boot_on = 1,
 			},
@@ -160,9 +157,6 @@ static struct ab3100_platform_data ab3100_plf_data = {
 				.min_uV = 2500000,
 				.max_uV = 2500000,
 				.valid_modes_mask = REGULATOR_MODE_NORMAL,
-				.valid_ops_mask =
-				REGULATOR_CHANGE_VOLTAGE |
-				REGULATOR_CHANGE_STATUS,
 				.always_on = 1,
 				.boot_on = 1,
 			},
@@ -230,8 +224,7 @@ static struct ab3100_platform_data ab3100_plf_data = {
 				.max_uV = 1800000,
 				.valid_modes_mask = REGULATOR_MODE_NORMAL,
 				.valid_ops_mask =
-				REGULATOR_CHANGE_VOLTAGE |
-				REGULATOR_CHANGE_STATUS,
+				REGULATOR_CHANGE_VOLTAGE,
 				.always_on = 1,
 				.boot_on = 1,
 			},

arch/arm/mach-u300/include/mach/irqs.h

@@ -12,101 +12,101 @@
 #ifndef __MACH_IRQS_H
 #define __MACH_IRQS_H
 
-#define IRQ_U300_INTCON0_START		0
-#define IRQ_U300_INTCON1_START		32
+#define IRQ_U300_INTCON0_START		1
+#define IRQ_U300_INTCON1_START		33
 /* These are on INTCON0 - 30 lines */
-#define IRQ_U300_IRQ0_EXT		0
-#define IRQ_U300_IRQ1_EXT		1
-#define IRQ_U300_DMA			2
-#define IRQ_U300_VIDEO_ENC_0		3
-#define IRQ_U300_VIDEO_ENC_1		4
-#define IRQ_U300_AAIF_RX		5
-#define IRQ_U300_AAIF_TX		6
-#define IRQ_U300_AAIF_VGPIO		7
-#define IRQ_U300_AAIF_WAKEUP		8
-#define IRQ_U300_PCM_I2S0_FRAME		9
-#define IRQ_U300_PCM_I2S0_FIFO		10
-#define IRQ_U300_PCM_I2S1_FRAME		11
-#define IRQ_U300_PCM_I2S1_FIFO		12
-#define IRQ_U300_XGAM_GAMCON		13
-#define IRQ_U300_XGAM_CDI		14
-#define IRQ_U300_XGAM_CDICON		15
+#define IRQ_U300_IRQ0_EXT		1
+#define IRQ_U300_IRQ1_EXT		2
+#define IRQ_U300_DMA			3
+#define IRQ_U300_VIDEO_ENC_0		4
+#define IRQ_U300_VIDEO_ENC_1		5
+#define IRQ_U300_AAIF_RX		6
+#define IRQ_U300_AAIF_TX		7
+#define IRQ_U300_AAIF_VGPIO		8
+#define IRQ_U300_AAIF_WAKEUP		9
+#define IRQ_U300_PCM_I2S0_FRAME		10
+#define IRQ_U300_PCM_I2S0_FIFO		11
+#define IRQ_U300_PCM_I2S1_FRAME		12
+#define IRQ_U300_PCM_I2S1_FIFO		13
+#define IRQ_U300_XGAM_GAMCON		14
+#define IRQ_U300_XGAM_CDI		15
+#define IRQ_U300_XGAM_CDICON		16
 #if defined(CONFIG_MACH_U300_BS2X) || defined(CONFIG_MACH_U300_BS330)
 /* MMIACC not used on the DB3210 or DB3350 chips */
-#define IRQ_U300_XGAM_MMIACC		16
+#define IRQ_U300_XGAM_MMIACC		17
 #endif
-#define IRQ_U300_XGAM_PDI		17
-#define IRQ_U300_XGAM_PDICON		18
-#define IRQ_U300_XGAM_GAMEACC		19
-#define IRQ_U300_XGAM_MCIDCT		20
-#define IRQ_U300_APEX			21
-#define IRQ_U300_UART0			22
-#define IRQ_U300_SPI			23
-#define IRQ_U300_TIMER_APP_OS		24
-#define IRQ_U300_TIMER_APP_DD		25
-#define IRQ_U300_TIMER_APP_GP1		26
-#define IRQ_U300_TIMER_APP_GP2		27
-#define IRQ_U300_TIMER_OS		28
-#define IRQ_U300_TIMER_MS		29
-#define IRQ_U300_KEYPAD_KEYBF		30
-#define IRQ_U300_KEYPAD_KEYBR		31
+#define IRQ_U300_XGAM_PDI		18
+#define IRQ_U300_XGAM_PDICON		19
+#define IRQ_U300_XGAM_GAMEACC		20
+#define IRQ_U300_XGAM_MCIDCT		21
+#define IRQ_U300_APEX			22
+#define IRQ_U300_UART0			23
+#define IRQ_U300_SPI			24
+#define IRQ_U300_TIMER_APP_OS		25
+#define IRQ_U300_TIMER_APP_DD		26
+#define IRQ_U300_TIMER_APP_GP1		27
+#define IRQ_U300_TIMER_APP_GP2		28
+#define IRQ_U300_TIMER_OS		29
+#define IRQ_U300_TIMER_MS		30
+#define IRQ_U300_KEYPAD_KEYBF		31
+#define IRQ_U300_KEYPAD_KEYBR		32
 /* These are on INTCON1 - 32 lines */
-#define IRQ_U300_GPIO_PORT0		32
-#define IRQ_U300_GPIO_PORT1		33
-#define IRQ_U300_GPIO_PORT2		34
+#define IRQ_U300_GPIO_PORT0		33
+#define IRQ_U300_GPIO_PORT1		34
+#define IRQ_U300_GPIO_PORT2		35
 
 #if defined(CONFIG_MACH_U300_BS2X) || defined(CONFIG_MACH_U300_BS330) || \
     defined(CONFIG_MACH_U300_BS335)
 /* These are for DB3150, DB3200 and DB3350 */
-#define IRQ_U300_WDOG			35
-#define IRQ_U300_EVHIST			36
-#define IRQ_U300_MSPRO			37
-#define IRQ_U300_MMCSD_MCIINTR0		38
-#define IRQ_U300_MMCSD_MCIINTR1		39
-#define IRQ_U300_I2C0			40
-#define IRQ_U300_I2C1			41
-#define IRQ_U300_RTC			42
-#define IRQ_U300_NFIF			43
-#define IRQ_U300_NFIF2			44
+#define IRQ_U300_WDOG			36
+#define IRQ_U300_EVHIST			37
+#define IRQ_U300_MSPRO			38
+#define IRQ_U300_MMCSD_MCIINTR0		39
+#define IRQ_U300_MMCSD_MCIINTR1		40
+#define IRQ_U300_I2C0			41
+#define IRQ_U300_I2C1			42
+#define IRQ_U300_RTC			43
+#define IRQ_U300_NFIF			44
+#define IRQ_U300_NFIF2			45
 #endif
 
 /* DB3150 and DB3200 have only 45 IRQs */
 #if defined(CONFIG_MACH_U300_BS2X) || defined(CONFIG_MACH_U300_BS330)
-#define U300_VIC_IRQS_END		45
+#define U300_VIC_IRQS_END		46
 #endif
 
 /* The DB3350-specific interrupt lines */
 #ifdef CONFIG_MACH_U300_BS335
-#define IRQ_U300_ISP_F0			45
-#define IRQ_U300_ISP_F1			46
-#define IRQ_U300_ISP_F2			47
-#define IRQ_U300_ISP_F3			48
-#define IRQ_U300_ISP_F4			49
-#define IRQ_U300_GPIO_PORT3		50
-#define IRQ_U300_SYSCON_PLL_LOCK	51
-#define IRQ_U300_UART1			52
-#define IRQ_U300_GPIO_PORT4		53
-#define IRQ_U300_GPIO_PORT5		54
-#define IRQ_U300_GPIO_PORT6		55
-#define U300_VIC_IRQS_END		56
+#define IRQ_U300_ISP_F0			46
+#define IRQ_U300_ISP_F1			47
+#define IRQ_U300_ISP_F2			48
+#define IRQ_U300_ISP_F3			49
+#define IRQ_U300_ISP_F4			50
+#define IRQ_U300_GPIO_PORT3		51
+#define IRQ_U300_SYSCON_PLL_LOCK	52
+#define IRQ_U300_UART1			53
+#define IRQ_U300_GPIO_PORT4		54
+#define IRQ_U300_GPIO_PORT5		55
+#define IRQ_U300_GPIO_PORT6		56
+#define U300_VIC_IRQS_END		57
 #endif
 
 /* The DB3210-specific interrupt lines */
 #ifdef CONFIG_MACH_U300_BS365
-#define IRQ_U300_GPIO_PORT3		35
-#define IRQ_U300_GPIO_PORT4		36
-#define IRQ_U300_WDOG			37
-#define IRQ_U300_EVHIST			38
-#define IRQ_U300_MSPRO			39
-#define IRQ_U300_MMCSD_MCIINTR0		40
-#define IRQ_U300_MMCSD_MCIINTR1		41
-#define IRQ_U300_I2C0			42
-#define IRQ_U300_I2C1			43
-#define IRQ_U300_RTC			44
-#define IRQ_U300_NFIF			45
-#define IRQ_U300_NFIF2			46
-#define IRQ_U300_SYSCON_PLL_LOCK	47
-#define U300_VIC_IRQS_END		48
+#define IRQ_U300_GPIO_PORT3		36
+#define IRQ_U300_GPIO_PORT4		37
+#define IRQ_U300_WDOG			38
+#define IRQ_U300_EVHIST			39
+#define IRQ_U300_MSPRO			40
+#define IRQ_U300_MMCSD_MCIINTR0		41
+#define IRQ_U300_MMCSD_MCIINTR1		42
+#define IRQ_U300_I2C0			43
+#define IRQ_U300_I2C1			44
+#define IRQ_U300_RTC			45
+#define IRQ_U300_NFIF			46
+#define IRQ_U300_NFIF2			47
+#define IRQ_U300_SYSCON_PLL_LOCK	48
+#define U300_VIC_IRQS_END		49
 #endif
 
 /* Maximum 8*7 GPIO lines */
@@ -117,6 +117,6 @@
 #define IRQ_U300_GPIO_END		(U300_VIC_IRQS_END)
 #endif
 
-#define NR_IRQS				(IRQ_U300_GPIO_END)
+#define NR_IRQS				(IRQ_U300_GPIO_END - IRQ_U300_INTCON0_START)
 
 #endif

arch/arm/mach-ux500/Kconfig

@@ -17,6 +17,7 @@ config UX500_SOC_DB5500
 config UX500_SOC_DB8500
 	bool
 	select MFD_DB8500_PRCMU
+	select REGULATOR
 	select REGULATOR_DB8500_PRCMU
 	select CPU_FREQ_TABLE if CPU_FREQ
 

arch/arm/mach-ux500/mbox-db5500.c

@@ -168,7 +168,7 @@ static ssize_t mbox_read_fifo(struct device *dev,
 	return sprintf(buf, "0x%X\n", mbox_value);
 }
 
-static DEVICE_ATTR(fifo, S_IWUGO | S_IRUGO, mbox_read_fifo, mbox_write_fifo);
+static DEVICE_ATTR(fifo, S_IWUSR | S_IRUGO, mbox_read_fifo, mbox_write_fifo);
 
 static int mbox_show(struct seq_file *s, void *data)
 {

arch/arm/mach-ux500/platsmp.c

@@ -99,7 +99,7 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
 	 */
 	write_pen_release(cpu_logical_map(cpu));
 
-	gic_raise_softirq(cpumask_of(cpu), 1);
+	smp_send_reschedule(cpu);
 
 	timeout = jiffies + (1 * HZ);
 	while (time_before(jiffies, timeout)) {