unicore32: move rtc-puv3.c to drivers/rtc directory

The patch moves rtc driver for PKUnity-v3 SoC from arch/unicore32/kernel/
to drivers/rtc/, with renaming it to rtc-puv3.c.
Also, Kconfig, Makefile, and MAINTAINERS are modified correspondingly.

Signed-off-by: Guan Xuetao <gxt@mprc.pku.edu.cn>
Acked-by: Arnd Bergmann <arnd@arndb.de>

MAINTAINERS

@@ -4945,6 +4945,7 @@ T:	git git://git.kernel.org/pub/scm/linux/kernel/git/epip/linux-2.6-unicore32.gi
 F:	drivers/input/serio/i8042-unicore32io.h
 F:	drivers/i2c/busses/i2c-puv3.c
 F:	drivers/video/fb-puv3.c
+F:	drivers/rtc/rtc-puv3.c
 
 PMC SIERRA MaxRAID DRIVER
 M:	Anil Ravindranath <anil_ravindranath@pmc-sierra.com>

arch/unicore32/Kconfig

@@ -231,10 +231,6 @@ config PUV3_PWM
 	help
 	  Enable support for NB0916 PWM controllers
 
-config PUV3_RTC
-	tristate "PKUnity v3 RTC Support"
-	depends on !ARCH_FPGA
-
 if PUV3_NB0916
 
 menu "PKUnity NetBook-0916 Features"

arch/unicore32/configs/debug_defconfig

@@ -64,7 +64,6 @@ CONFIG_I2C_BATTERY_BQ27200=n
 CONFIG_I2C_EEPROM_AT24=n
 CONFIG_LCD_BACKLIGHT=n
 
-CONFIG_PUV3_RTC=y
 CONFIG_PUV3_UMAL=y
 CONFIG_PUV3_MUSB=n
 CONFIG_PUV3_AC97=n
@@ -167,8 +166,9 @@ CONFIG_LEDS_TRIGGER_IDE_DISK=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
 
 #	Real Time Clock
-CONFIG_RTC_LIB=m
-CONFIG_RTC_CLASS=m
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_PUV3=y
 
 ### File systems
 CONFIG_EXT2_FS=m

arch/unicore32/kernel/Makefile

@@ -16,7 +16,6 @@ obj-$(CONFIG_UNICORE_FPU_F64)	+= fpu-ucf64.o
 obj-$(CONFIG_ARCH_PUV3)		+= clock.o irq.o time.o
 
 obj-$(CONFIG_PUV3_GPIO)		+= gpio.o
-obj-$(CONFIG_PUV3_RTC)		+= rtc.o
 obj-$(CONFIG_PUV3_PWM)		+= pwm.o
 obj-$(CONFIG_PUV3_PM)		+= pm.o sleep.o
 obj-$(CONFIG_HIBERNATION)	+= hibernate.o hibernate_asm.o

drivers/rtc/Kconfig

@@ -1051,4 +1051,13 @@ config RTC_DRV_TILE
 	  Enable support for the Linux driver side of the Tilera
 	  hypervisor's real-time clock interface.
 
+config RTC_DRV_PUV3
+	tristate "PKUnity v3 RTC support"
+	depends on ARCH_PUV3
+	help
+	  This enables support for the RTC in the PKUnity-v3 SoCs.
+
+	  This drive can also be built as a module. If so, the module
+	  will be called rtc-puv3.
+
 endif # RTC_CLASS

drivers/rtc/Makefile

@@ -78,6 +78,7 @@ obj-$(CONFIG_RTC_DRV_PCF50633)	+= rtc-pcf50633.o
 obj-$(CONFIG_RTC_DRV_PL030)	+= rtc-pl030.o
 obj-$(CONFIG_RTC_DRV_PL031)	+= rtc-pl031.o
 obj-$(CONFIG_RTC_DRV_PS3)	+= rtc-ps3.o
+obj-$(CONFIG_RTC_DRV_PUV3)	+= rtc-puv3.o
 obj-$(CONFIG_RTC_DRV_PXA)	+= rtc-pxa.o
 obj-$(CONFIG_RTC_DRV_R9701)	+= rtc-r9701.o
 obj-$(CONFIG_RTC_DRV_RP5C01)	+= rtc-rp5c01.o

arch/unicore32/kernel/rtc.c → drivers/rtc/rtc-puv3.c

@@ -1,7 +1,5 @@
 /*
- * linux/arch/unicore32/kernel/rtc.c
- *
- * Code specific to PKUnity SoC and UniCore ISA
+ * RTC driver code specific to PKUnity SoC and UniCore ISA
  *
  *	Maintained by GUAN Xue-tao <gxt@mprc.pku.edu.cn>
  *	Copyright (C) 2001-2010 Guan Xuetao
@@ -36,7 +34,6 @@ static int puv3_rtc_tickno  = IRQ_RTC;
 static DEFINE_SPINLOCK(puv3_rtc_pie_lock);
 
 /* IRQ Handlers */
-
 static irqreturn_t puv3_rtc_alarmirq(int irq, void *id)
 {
 	struct rtc_device *rdev = id;
@@ -89,7 +86,6 @@ static int puv3_rtc_setpie(struct device *dev, int enabled)
 }
 
 /* Time read/write */
-
 static int puv3_rtc_gettime(struct device *dev, struct rtc_time *rtc_tm)
 {
 	rtc_time_to_tm(readl(RTC_RCNR), rtc_tm);
@@ -196,7 +192,6 @@ static void puv3_rtc_release(struct device *dev)
 	struct rtc_device *rtc_dev = platform_get_drvdata(pdev);
 
 	/* do not clear AIE here, it may be needed for wake */
-
 	puv3_rtc_setpie(dev, 0);
 	free_irq(puv3_rtc_alarmno, rtc_dev);
 	free_irq(puv3_rtc_tickno, rtc_dev);
@@ -218,7 +213,6 @@ static void puv3_rtc_enable(struct platform_device *pdev, int en)
 		writel(readl(RTC_RTSR) & ~RTC_RTSR_HZE, RTC_RTSR);
 	} else {
 		/* re-enable the device, and check it is ok */
-
 		if ((readl(RTC_RTSR) & RTC_RTSR_HZE) == 0) {
 			dev_info(&pdev->dev, "rtc disabled, re-enabling\n");
 			writel(readl(RTC_RTSR) | RTC_RTSR_HZE, RTC_RTSR);
@@ -251,7 +245,6 @@ static int puv3_rtc_probe(struct platform_device *pdev)
 	pr_debug("%s: probe=%p\n", __func__, pdev);
 
 	/* find the IRQs */
-
 	puv3_rtc_tickno = platform_get_irq(pdev, 1);
 	if (puv3_rtc_tickno < 0) {
 		dev_err(&pdev->dev, "no irq for rtc tick\n");
@@ -268,7 +261,6 @@ static int puv3_rtc_probe(struct platform_device *pdev)
 		 puv3_rtc_tickno, puv3_rtc_alarmno);
 
 	/* get the memory region */
-
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (res == NULL) {
 		dev_err(&pdev->dev, "failed to get memory region resource\n");
@@ -288,7 +280,6 @@ static int puv3_rtc_probe(struct platform_device *pdev)
 	puv3_rtc_enable(pdev, 1);
 
 	/* register RTC and exit */
-
 	rtc = rtc_device_register("pkunity", &pdev->dev, &puv3_rtcops,
 				  THIS_MODULE);
 
@@ -315,8 +306,6 @@ static int puv3_rtc_probe(struct platform_device *pdev)
 
 #ifdef CONFIG_PM
 
-/* RTC Power management control */
-
 static int ticnt_save;
 
 static int puv3_rtc_suspend(struct platform_device *pdev, pm_message_t state)
@@ -368,4 +357,3 @@ module_exit(puv3_rtc_exit);
 MODULE_DESCRIPTION("RTC Driver for the PKUnity v3 chip");
 MODULE_AUTHOR("Hu Dongliang");
 MODULE_LICENSE("GPL v2");
-