USB: re-remove <linux/usb_sl811.h>

Remove <linux/usb_sl811.h> ... somehow this was recreated when
the Blackfin arch was merged, instead of using <linux/usb/sl811.h>
which is the correct header.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

arch/blackfin/mach-bf537/boards/generic_board.c

@@ -40,7 +40,7 @@
 #include <linux/pata_platform.h>
 #include <linux/irq.h>
 #include <linux/interrupt.h>
-#include <linux/usb_sl811.h>
+#include <linux/usb/sl811.h>
 #include <asm/dma.h>
 #include <asm/bfin5xx_spi.h>
 #include <asm/reboot.h>

arch/blackfin/mach-bf537/boards/pnav10.c

@@ -40,7 +40,7 @@
 #include <linux/irq.h>
 #include <asm/dma.h>
 #include <asm/bfin5xx_spi.h>
-#include <linux/usb_sl811.h>
+#include <linux/usb/sl811.h>
 
 #include <linux/spi/ad7877.h>
 

arch/blackfin/mach-bf537/boards/stamp.c

@@ -40,7 +40,7 @@
 #include <linux/pata_platform.h>
 #include <linux/irq.h>
 #include <linux/interrupt.h>
-#include <linux/usb_sl811.h>
+#include <linux/usb/sl811.h>
 #include <asm/dma.h>
 #include <asm/bfin5xx_spi.h>
 #include <asm/reboot.h>

include/linux/usb_sl811.h

@@ -1,26 +0,0 @@
-
-/*
- * board initialization should put one of these into dev->platform_data
- * and place the sl811hs onto platform_bus named "sl811-hcd".
- */
-
-struct sl811_platform_data {
-	unsigned	can_wakeup:1;
-
-	/* given port_power, msec/2 after power on till power good */
-	u8		potpg;
-
-	/* mA/2 power supplied on this port (max = default = 250) */
-	u8		power;
-
-	/* sl811 relies on an external source of VBUS current */
-	void 		(*port_power)(struct device *dev, int is_on);
-
-	/* pulse sl811 nRST (probably with a GPIO) */
-	void 		(*reset)(struct device *dev);
-
-	// some boards need something like these:
- 	// int 		(*check_overcurrent)(struct device *dev);
- 	// void 	(*clock_enable)(struct device *dev, int is_on);
-};
-