sky2: fix regression on Yukon Optima

Changes to support other Optima types, introduced an accidental
regression that caused 88E8059 to come up in 10Mbit/sec.

The Yukon Optima supports a reverse auto-negotiation feature that
was incorrectly setup, and not needed. The feature could be used to
allow wake-on-lan at higher speeds. But doing it correctly would require
other changes to initialization.

Reported-by: Pavel Mateja <pavel@netsafe.cz>
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/marvell/sky2.c

@@ -366,17 +366,6 @@ static void sky2_phy_init(struct sky2_hw *hw, unsigned port)
 				gm_phy_write(hw, port, PHY_MARV_FE_SPEC_2, spec);
 			}
 		} else {
-			if (hw->chip_id >= CHIP_ID_YUKON_OPT) {
-				u16 ctrl2 = gm_phy_read(hw, port, PHY_MARV_EXT_CTRL_2);
-
-				/* enable PHY Reverse Auto-Negotiation */
-				ctrl2 |= 1u << 13;
-
-				/* Write PHY changes (SW-reset must follow) */
-				gm_phy_write(hw, port, PHY_MARV_EXT_CTRL_2, ctrl2);
-			}
-
-
 			/* disable energy detect */
 			ctrl &= ~PHY_M_PC_EN_DET_MSK;