|
@@ -1,6 +1,9 @@
|
|
|
/*
|
|
|
* w83627hf/thf WDT driver
|
|
|
*
|
|
|
+ * (c) Copyright 2013 Guenter Roeck
|
|
|
+ * converted to watchdog infrastructure
|
|
|
+ *
|
|
|
* (c) Copyright 2007 Vlad Drukker <vlad@storewiz.com>
|
|
|
* added support for W83627THF.
|
|
|
*
|
|
@@ -31,31 +34,22 @@
|
|
|
#include <linux/module.h>
|
|
|
#include <linux/moduleparam.h>
|
|
|
#include <linux/types.h>
|
|
|
-#include <linux/miscdevice.h>
|
|
|
#include <linux/watchdog.h>
|
|
|
-#include <linux/fs.h>
|
|
|
#include <linux/ioport.h>
|
|
|
#include <linux/notifier.h>
|
|
|
#include <linux/reboot.h>
|
|
|
#include <linux/init.h>
|
|
|
-#include <linux/spinlock.h>
|
|
|
#include <linux/io.h>
|
|
|
-#include <linux/uaccess.h>
|
|
|
-
|
|
|
|
|
|
#define WATCHDOG_NAME "w83627hf/thf/hg/dhg WDT"
|
|
|
#define WATCHDOG_TIMEOUT 60 /* 60 sec default timeout */
|
|
|
|
|
|
-static unsigned long wdt_is_open;
|
|
|
-static char expect_close;
|
|
|
-static DEFINE_SPINLOCK(io_lock);
|
|
|
-
|
|
|
/* You must set this - there is no sane way to probe for this board. */
|
|
|
static int wdt_io = 0x2E;
|
|
|
module_param(wdt_io, int, 0);
|
|
|
MODULE_PARM_DESC(wdt_io, "w83627hf/thf WDT io port (default 0x2E)");
|
|
|
|
|
|
-static int timeout = WATCHDOG_TIMEOUT; /* in seconds */
|
|
|
+static int timeout; /* in seconds */
|
|
|
module_param(timeout, int, 0);
|
|
|
MODULE_PARM_DESC(timeout,
|
|
|
"Watchdog timeout in seconds. 1 <= timeout <= 255, default="
|
|
@@ -76,236 +70,147 @@ MODULE_PARM_DESC(nowayout,
|
|
|
(same as EFER) */
|
|
|
#define WDT_EFDR (WDT_EFIR+1) /* Extended Function Data Register */
|
|
|
|
|
|
-static void w83627hf_select_wd_register(void)
|
|
|
+#define W83627HF_LD_WDT 0x08
|
|
|
+
|
|
|
+static void superio_outb(int reg, int val)
|
|
|
{
|
|
|
- unsigned char c;
|
|
|
+ outb(reg, WDT_EFER);
|
|
|
+ outb(val, WDT_EFDR);
|
|
|
+}
|
|
|
+
|
|
|
+static inline int superio_inb(int reg)
|
|
|
+{
|
|
|
+ outb(reg, WDT_EFER);
|
|
|
+ return inb(WDT_EFDR);
|
|
|
+}
|
|
|
+
|
|
|
+static int superio_enter(void)
|
|
|
+{
|
|
|
+ if (!request_muxed_region(wdt_io, 2, WATCHDOG_NAME))
|
|
|
+ return -EBUSY;
|
|
|
+
|
|
|
outb_p(0x87, WDT_EFER); /* Enter extended function mode */
|
|
|
outb_p(0x87, WDT_EFER); /* Again according to manual */
|
|
|
|
|
|
- outb(0x20, WDT_EFER); /* check chip version */
|
|
|
- c = inb(WDT_EFDR);
|
|
|
- if (c == 0x82) { /* W83627THF */
|
|
|
- outb_p(0x2b, WDT_EFER); /* select GPIO3 */
|
|
|
- c = ((inb_p(WDT_EFDR) & 0xf7) | 0x04); /* select WDT0 */
|
|
|
- outb_p(0x2b, WDT_EFER);
|
|
|
- outb_p(c, WDT_EFDR); /* set GPIO3 to WDT0 */
|
|
|
- } else if (c == 0x88 || c == 0xa0) { /* W83627EHF / W83627DHG */
|
|
|
- outb_p(0x2d, WDT_EFER); /* select GPIO5 */
|
|
|
- c = inb_p(WDT_EFDR) & ~0x01; /* PIN77 -> WDT0# */
|
|
|
- outb_p(0x2d, WDT_EFER);
|
|
|
- outb_p(c, WDT_EFDR); /* set GPIO5 to WDT0 */
|
|
|
- }
|
|
|
+ return 0;
|
|
|
+}
|
|
|
|
|
|
- outb_p(0x07, WDT_EFER); /* point to logical device number reg */
|
|
|
- outb_p(0x08, WDT_EFDR); /* select logical device 8 (GPIO2) */
|
|
|
- outb_p(0x30, WDT_EFER); /* select CR30 */
|
|
|
- outb_p(0x01, WDT_EFDR); /* set bit 0 to activate GPIO2 */
|
|
|
+static void superio_select(int ld)
|
|
|
+{
|
|
|
+ superio_outb(0x07, ld);
|
|
|
}
|
|
|
|
|
|
-static void w83627hf_unselect_wd_register(void)
|
|
|
+static void superio_exit(void)
|
|
|
{
|
|
|
outb_p(0xAA, WDT_EFER); /* Leave extended function mode */
|
|
|
+ release_region(wdt_io, 2);
|
|
|
}
|
|
|
|
|
|
/* tyan motherboards seem to set F5 to 0x4C ?
|
|
|
* So explicitly init to appropriate value. */
|
|
|
|
|
|
-static void w83627hf_init(void)
|
|
|
+static int w83627hf_init(struct watchdog_device *wdog)
|
|
|
{
|
|
|
+ int ret;
|
|
|
unsigned char t;
|
|
|
|
|
|
- w83627hf_select_wd_register();
|
|
|
+ ret = superio_enter();
|
|
|
+ if (ret)
|
|
|
+ return ret;
|
|
|
+
|
|
|
+ superio_select(W83627HF_LD_WDT);
|
|
|
+ t = superio_inb(0x20); /* check chip version */
|
|
|
+ if (t == 0x82) { /* W83627THF */
|
|
|
+ t = (superio_inb(0x2b) & 0xf7);
|
|
|
+ superio_outb(0x2b, t | 0x04); /* set GPIO3 to WDT0 */
|
|
|
+ } else if (t == 0x88 || t == 0xa0) { /* W83627EHF / W83627DHG */
|
|
|
+ t = superio_inb(0x2d);
|
|
|
+ superio_outb(0x2d, t & ~0x01); /* set GPIO5 to WDT0 */
|
|
|
+ }
|
|
|
+
|
|
|
+ /* set CR30 bit 0 to activate GPIO2 */
|
|
|
+ t = superio_inb(0x30);
|
|
|
+ if (!(t & 0x01))
|
|
|
+ superio_outb(0x30, t | 0x01);
|
|
|
|
|
|
- outb_p(0xF6, WDT_EFER); /* Select CRF6 */
|
|
|
- t = inb_p(WDT_EFDR); /* read CRF6 */
|
|
|
+ t = superio_inb(0xF6);
|
|
|
if (t != 0) {
|
|
|
pr_info("Watchdog already running. Resetting timeout to %d sec\n",
|
|
|
- timeout);
|
|
|
- outb_p(timeout, WDT_EFDR); /* Write back to CRF6 */
|
|
|
+ wdog->timeout);
|
|
|
+ superio_outb(0xF6, wdog->timeout);
|
|
|
}
|
|
|
|
|
|
- outb_p(0xF5, WDT_EFER); /* Select CRF5 */
|
|
|
- t = inb_p(WDT_EFDR); /* read CRF5 */
|
|
|
- t &= ~0x0C; /* set second mode & disable keyboard
|
|
|
- turning off watchdog */
|
|
|
- t |= 0x02; /* enable the WDTO# output low pulse
|
|
|
- to the KBRST# pin (PIN60) */
|
|
|
- outb_p(t, WDT_EFDR); /* Write back to CRF5 */
|
|
|
-
|
|
|
- outb_p(0xF7, WDT_EFER); /* Select CRF7 */
|
|
|
- t = inb_p(WDT_EFDR); /* read CRF7 */
|
|
|
- t &= ~0xC0; /* disable keyboard & mouse turning off
|
|
|
- watchdog */
|
|
|
- outb_p(t, WDT_EFDR); /* Write back to CRF7 */
|
|
|
-
|
|
|
- w83627hf_unselect_wd_register();
|
|
|
-}
|
|
|
-
|
|
|
-static void wdt_set_time(int timeout)
|
|
|
-{
|
|
|
- spin_lock(&io_lock);
|
|
|
-
|
|
|
- w83627hf_select_wd_register();
|
|
|
+ /* set second mode & disable keyboard turning off watchdog */
|
|
|
+ t = superio_inb(0xF5) & ~0x0C;
|
|
|
+ /* enable the WDTO# output low pulse to the KBRST# pin */
|
|
|
+ t |= 0x02;
|
|
|
+ superio_outb(0xF5, t);
|
|
|
|
|
|
- outb_p(0xF6, WDT_EFER); /* Select CRF6 */
|
|
|
- outb_p(timeout, WDT_EFDR); /* Write Timeout counter to CRF6 */
|
|
|
+ /* disable keyboard & mouse turning off watchdog */
|
|
|
+ t = superio_inb(0xF7) & ~0xC0;
|
|
|
+ superio_outb(0xF7, t);
|
|
|
|
|
|
- w83627hf_unselect_wd_register();
|
|
|
+ superio_exit();
|
|
|
|
|
|
- spin_unlock(&io_lock);
|
|
|
-}
|
|
|
-
|
|
|
-static int wdt_ping(void)
|
|
|
-{
|
|
|
- wdt_set_time(timeout);
|
|
|
return 0;
|
|
|
}
|
|
|
|
|
|
-static int wdt_disable(void)
|
|
|
+static int wdt_set_time(unsigned int timeout)
|
|
|
{
|
|
|
- wdt_set_time(0);
|
|
|
- return 0;
|
|
|
-}
|
|
|
+ int ret;
|
|
|
+
|
|
|
+ ret = superio_enter();
|
|
|
+ if (ret)
|
|
|
+ return ret;
|
|
|
+
|
|
|
+ superio_select(W83627HF_LD_WDT);
|
|
|
+ superio_outb(0xF6, timeout);
|
|
|
+ superio_exit();
|
|
|
|
|
|
-static int wdt_set_heartbeat(int t)
|
|
|
-{
|
|
|
- if (t < 1 || t > 255)
|
|
|
- return -EINVAL;
|
|
|
- timeout = t;
|
|
|
return 0;
|
|
|
}
|
|
|
|
|
|
-static int wdt_get_time(void)
|
|
|
+static int wdt_start(struct watchdog_device *wdog)
|
|
|
{
|
|
|
- int timeleft;
|
|
|
-
|
|
|
- spin_lock(&io_lock);
|
|
|
-
|
|
|
- w83627hf_select_wd_register();
|
|
|
-
|
|
|
- outb_p(0xF6, WDT_EFER); /* Select CRF6 */
|
|
|
- timeleft = inb_p(WDT_EFDR); /* Read Timeout counter to CRF6 */
|
|
|
-
|
|
|
- w83627hf_unselect_wd_register();
|
|
|
-
|
|
|
- spin_unlock(&io_lock);
|
|
|
-
|
|
|
- return timeleft;
|
|
|
+ return wdt_set_time(wdog->timeout);
|
|
|
}
|
|
|
|
|
|
-static ssize_t wdt_write(struct file *file, const char __user *buf,
|
|
|
- size_t count, loff_t *ppos)
|
|
|
+static int wdt_stop(struct watchdog_device *wdog)
|
|
|
{
|
|
|
- if (count) {
|
|
|
- if (!nowayout) {
|
|
|
- size_t i;
|
|
|
-
|
|
|
- expect_close = 0;
|
|
|
-
|
|
|
- for (i = 0; i != count; i++) {
|
|
|
- char c;
|
|
|
- if (get_user(c, buf + i))
|
|
|
- return -EFAULT;
|
|
|
- if (c == 'V')
|
|
|
- expect_close = 42;
|
|
|
- }
|
|
|
- }
|
|
|
- wdt_ping();
|
|
|
- }
|
|
|
- return count;
|
|
|
+ return wdt_set_time(0);
|
|
|
}
|
|
|
|
|
|
-static long wdt_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
|
|
|
+static int wdt_set_timeout(struct watchdog_device *wdog, unsigned int timeout)
|
|
|
{
|
|
|
- void __user *argp = (void __user *)arg;
|
|
|
- int __user *p = argp;
|
|
|
- int timeval;
|
|
|
- static const struct watchdog_info ident = {
|
|
|
- .options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT |
|
|
|
- WDIOF_MAGICCLOSE,
|
|
|
- .firmware_version = 1,
|
|
|
- .identity = "W83627HF WDT",
|
|
|
- };
|
|
|
-
|
|
|
- switch (cmd) {
|
|
|
- case WDIOC_GETSUPPORT:
|
|
|
- if (copy_to_user(argp, &ident, sizeof(ident)))
|
|
|
- return -EFAULT;
|
|
|
- break;
|
|
|
- case WDIOC_GETSTATUS:
|
|
|
- case WDIOC_GETBOOTSTATUS:
|
|
|
- return put_user(0, p);
|
|
|
- case WDIOC_SETOPTIONS:
|
|
|
- {
|
|
|
- int options, retval = -EINVAL;
|
|
|
-
|
|
|
- if (get_user(options, p))
|
|
|
- return -EFAULT;
|
|
|
- if (options & WDIOS_DISABLECARD) {
|
|
|
- wdt_disable();
|
|
|
- retval = 0;
|
|
|
- }
|
|
|
- if (options & WDIOS_ENABLECARD) {
|
|
|
- wdt_ping();
|
|
|
- retval = 0;
|
|
|
- }
|
|
|
- return retval;
|
|
|
- }
|
|
|
- case WDIOC_KEEPALIVE:
|
|
|
- wdt_ping();
|
|
|
- break;
|
|
|
- case WDIOC_SETTIMEOUT:
|
|
|
- if (get_user(timeval, p))
|
|
|
- return -EFAULT;
|
|
|
- if (wdt_set_heartbeat(timeval))
|
|
|
- return -EINVAL;
|
|
|
- wdt_ping();
|
|
|
- /* Fall */
|
|
|
- case WDIOC_GETTIMEOUT:
|
|
|
- return put_user(timeout, p);
|
|
|
- case WDIOC_GETTIMELEFT:
|
|
|
- timeval = wdt_get_time();
|
|
|
- return put_user(timeval, p);
|
|
|
- default:
|
|
|
- return -ENOTTY;
|
|
|
- }
|
|
|
+ wdog->timeout = timeout;
|
|
|
+
|
|
|
return 0;
|
|
|
}
|
|
|
|
|
|
-static int wdt_open(struct inode *inode, struct file *file)
|
|
|
+static unsigned int wdt_get_time(struct watchdog_device *wdog)
|
|
|
{
|
|
|
- if (test_and_set_bit(0, &wdt_is_open))
|
|
|
- return -EBUSY;
|
|
|
- /*
|
|
|
- * Activate
|
|
|
- */
|
|
|
+ unsigned int timeleft;
|
|
|
+ int ret;
|
|
|
|
|
|
- wdt_ping();
|
|
|
- return nonseekable_open(inode, file);
|
|
|
-}
|
|
|
+ ret = superio_enter();
|
|
|
+ if (ret)
|
|
|
+ return 0;
|
|
|
|
|
|
-static int wdt_close(struct inode *inode, struct file *file)
|
|
|
-{
|
|
|
- if (expect_close == 42)
|
|
|
- wdt_disable();
|
|
|
- else {
|
|
|
- pr_crit("Unexpected close, not stopping watchdog!\n");
|
|
|
- wdt_ping();
|
|
|
- }
|
|
|
- expect_close = 0;
|
|
|
- clear_bit(0, &wdt_is_open);
|
|
|
- return 0;
|
|
|
+ superio_select(W83627HF_LD_WDT);
|
|
|
+ timeleft = superio_inb(0xF6);
|
|
|
+ superio_exit();
|
|
|
+
|
|
|
+ return timeleft;
|
|
|
}
|
|
|
|
|
|
/*
|
|
|
* Notifier for system down
|
|
|
*/
|
|
|
-
|
|
|
static int wdt_notify_sys(struct notifier_block *this, unsigned long code,
|
|
|
void *unused)
|
|
|
{
|
|
|
if (code == SYS_DOWN || code == SYS_HALT)
|
|
|
- wdt_disable(); /* Turn the WDT off */
|
|
|
+ wdt_set_time(0); /* Turn the WDT off */
|
|
|
|
|
|
return NOTIFY_DONE;
|
|
|
}
|
|
@@ -314,19 +219,25 @@ static int wdt_notify_sys(struct notifier_block *this, unsigned long code,
|
|
|
* Kernel Interfaces
|
|
|
*/
|
|
|
|
|
|
-static const struct file_operations wdt_fops = {
|
|
|
- .owner = THIS_MODULE,
|
|
|
- .llseek = no_llseek,
|
|
|
- .write = wdt_write,
|
|
|
- .unlocked_ioctl = wdt_ioctl,
|
|
|
- .open = wdt_open,
|
|
|
- .release = wdt_close,
|
|
|
+static struct watchdog_info wdt_info = {
|
|
|
+ .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE,
|
|
|
+ .identity = "W83627HF Watchdog",
|
|
|
};
|
|
|
|
|
|
-static struct miscdevice wdt_miscdev = {
|
|
|
- .minor = WATCHDOG_MINOR,
|
|
|
- .name = "watchdog",
|
|
|
- .fops = &wdt_fops,
|
|
|
+static struct watchdog_ops wdt_ops = {
|
|
|
+ .owner = THIS_MODULE,
|
|
|
+ .start = wdt_start,
|
|
|
+ .stop = wdt_stop,
|
|
|
+ .set_timeout = wdt_set_timeout,
|
|
|
+ .get_timeleft = wdt_get_time,
|
|
|
+};
|
|
|
+
|
|
|
+static struct watchdog_device wdt_dev = {
|
|
|
+ .info = &wdt_info,
|
|
|
+ .ops = &wdt_ops,
|
|
|
+ .timeout = WATCHDOG_TIMEOUT,
|
|
|
+ .min_timeout = 1,
|
|
|
+ .max_timeout = 255,
|
|
|
};
|
|
|
|
|
|
/*
|
|
@@ -344,50 +255,39 @@ static int __init wdt_init(void)
|
|
|
|
|
|
pr_info("WDT driver for the Winbond(TM) W83627HF/THF/HG/DHG Super I/O chip initialising\n");
|
|
|
|
|
|
- if (wdt_set_heartbeat(timeout)) {
|
|
|
- wdt_set_heartbeat(WATCHDOG_TIMEOUT);
|
|
|
- pr_info("timeout value must be 1 <= timeout <= 255, using %d\n",
|
|
|
- WATCHDOG_TIMEOUT);
|
|
|
- }
|
|
|
+ watchdog_init_timeout(&wdt_dev, timeout, NULL);
|
|
|
+ watchdog_set_nowayout(&wdt_dev, nowayout);
|
|
|
|
|
|
- if (!request_region(wdt_io, 1, WATCHDOG_NAME)) {
|
|
|
- pr_err("I/O address 0x%04x already in use\n", wdt_io);
|
|
|
- ret = -EIO;
|
|
|
- goto out;
|
|
|
+ ret = w83627hf_init(&wdt_dev);
|
|
|
+ if (ret) {
|
|
|
+ pr_err("failed to initialize watchdog (err=%d)\n", ret);
|
|
|
+ return ret;
|
|
|
}
|
|
|
|
|
|
- w83627hf_init();
|
|
|
-
|
|
|
ret = register_reboot_notifier(&wdt_notifier);
|
|
|
if (ret != 0) {
|
|
|
pr_err("cannot register reboot notifier (err=%d)\n", ret);
|
|
|
- goto unreg_regions;
|
|
|
+ return ret;
|
|
|
}
|
|
|
|
|
|
- ret = misc_register(&wdt_miscdev);
|
|
|
- if (ret != 0) {
|
|
|
- pr_err("cannot register miscdev on minor=%d (err=%d)\n",
|
|
|
- WATCHDOG_MINOR, ret);
|
|
|
+ ret = watchdog_register_device(&wdt_dev);
|
|
|
+ if (ret)
|
|
|
goto unreg_reboot;
|
|
|
- }
|
|
|
|
|
|
pr_info("initialized. timeout=%d sec (nowayout=%d)\n",
|
|
|
- timeout, nowayout);
|
|
|
+ wdt_dev.timeout, nowayout);
|
|
|
|
|
|
-out:
|
|
|
return ret;
|
|
|
+
|
|
|
unreg_reboot:
|
|
|
unregister_reboot_notifier(&wdt_notifier);
|
|
|
-unreg_regions:
|
|
|
- release_region(wdt_io, 1);
|
|
|
- goto out;
|
|
|
+ return ret;
|
|
|
}
|
|
|
|
|
|
static void __exit wdt_exit(void)
|
|
|
{
|
|
|
- misc_deregister(&wdt_miscdev);
|
|
|
+ watchdog_unregister_device(&wdt_dev);
|
|
|
unregister_reboot_notifier(&wdt_notifier);
|
|
|
- release_region(wdt_io, 1);
|
|
|
}
|
|
|
|
|
|
module_init(wdt_init);
|
|
@@ -396,4 +296,3 @@ module_exit(wdt_exit);
|
|
|
MODULE_LICENSE("GPL");
|
|
|
MODULE_AUTHOR("Pádraig Brady <P@draigBrady.com>");
|
|
|
MODULE_DESCRIPTION("w83627hf/thf WDT driver");
|
|
|
-MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
|