Staging: pata_rdc: remove the driver from the staging tree

Now that a "real" driver is in the libata tree for this hardware, we need
to remove the staging driver as it is no longer needed.

Cc: Kevin Huang  <Kevin.Huang@rdc.com.tw>
Cc: Tomy Wang <Tomy.Wang@rdc.com.tw>
Cc: Alan Cox <alan@linux.intel.com>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

drivers/staging/Kconfig

@@ -129,8 +129,6 @@ source "drivers/staging/vt6656/Kconfig"
 
 source "drivers/staging/cpc-usb/Kconfig"
 
-source "drivers/staging/pata_rdc/Kconfig"
-
 source "drivers/staging/udlfb/Kconfig"
 
 source "drivers/staging/hv/Kconfig"

drivers/staging/Makefile

@@ -46,7 +46,6 @@ obj-$(CONFIG_OCTEON_ETHERNET)	+= octeon/
 obj-$(CONFIG_VT6655)		+= vt6655/
 obj-$(CONFIG_VT6656)		+= vt6656/
 obj-$(CONFIG_USB_CPC)		+= cpc-usb/
-obj-$(CONFIG_RDC_17F3101X)	+= pata_rdc/
 obj-$(CONFIG_FB_UDL)		+= udlfb/
 obj-$(CONFIG_HYPERV)		+= hv/
 obj-$(CONFIG_VME_BUS)		+= vme/

drivers/staging/pata_rdc/Kconfig

@@ -1,6 +0,0 @@
-config RDC_17F3101X
-	tristate "RDC_17F3101X IDE support"
-	depends on PCI && ATA && ATA_SFF
-	---help---
-	  This is an experimental driver for RDC_17F31011 and
-	  RDC_17F31012 IDE driver.

drivers/staging/pata_rdc/Makefile

@@ -1,2 +0,0 @@
-obj-$(CONFIG_RDC_17F3101X)	+= pata_rdc.o
-

drivers/staging/pata_rdc/pata_rdc.c

@@ -1,955 +0,0 @@
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/module.h>
-
-#include <linux/pci.h>
-#include <linux/device.h>
-
-#include <scsi/scsi_host.h>
-#include <linux/libata.h>
-
-#include "pata_rdc.h"
-
-static const struct pci_device_id rdc_pata_id_table[] = {
-	{ PCI_DEVICE(0x17F3, 0x1011), RDC_17F31011},
-	{ PCI_DEVICE(0x17F3, 0x1012), RDC_17F31012},
-	{ }	/* terminate list */
-};
-MODULE_DEVICE_TABLE(pci, rdc_pata_id_table);
-
-/* see ATA Host Adapters Standards. */
-static struct pci_bits ATA_Decode_Enable_Bits[] = {
-	{ 0x41U, 1U, 0x80UL, 0x80UL },	/* port (Channel) 0 */
-	{ 0x43U, 1U, 0x80UL, 0x80UL },	/* port (Channel) 1 */
-};
-
-static uint PCIDeviceIO_ReadPCIConfiguration(struct pci_dev *pdev, uint Offset, uint Length, void *pBuffer)
-{
-	uint funcresult;
-	unchar *pchar;
-	uint i;
-
-	funcresult = TRUE;
-
-	pchar = pBuffer;
-
-	for (i = 0; i < Length; i++) {
-		pci_read_config_byte(pdev, Offset, pchar);
-		Offset++;
-		pchar++;
-	}
-
-	funcresult = TRUE;
-
-	goto funcexit;
-funcexit:
-
-	return funcresult;
-}
-
-static uint PCIDeviceIO_WritePCIConfiguration(struct pci_dev *pdev, uint Offset, uint Length, void *pBuffer)
-{
-	uint funcresult;
-	unchar *pchar;
-	uint i;
-
-	funcresult = TRUE;
-
-	pchar = pBuffer;
-
-	for (i = 0; i < Length; i++) {
-		pci_write_config_byte(pdev, Offset, *pchar);
-		Offset++;
-		pchar++;
-	}
-
-	funcresult = TRUE;
-
-	goto funcexit;
-funcexit:
-
-	return funcresult;
-}
-
-static uint ATAHostAdapter_SetPrimaryPIO(struct pci_dev *pdev, uint DeviceID,
-					 uint PIOTimingMode, uint DMAEnable,
-					 uint PrefetchPostingEnable)
-{
-	uint funcresult;
-	uint result;
-	uint ATATimingRegister;
-	uint Device1TimingRegister;
-
-	funcresult = TRUE;
-
-	ATATimingRegister = 0;
-	Device1TimingRegister = 0;
-
-	result = PCIDeviceIO_ReadPCIConfiguration(pdev,
-						 ATAConfiguration_ID_PrimaryTiming + ATAConfiguration_PCIOffset,
-						 ATAConfiguration_ID_PrimaryTiming_Size,
-						 &ATATimingRegister);
-	if (result == FALSE) {
-		funcresult = FALSE;
-		goto funcexit;
-	}
-
-	result = PCIDeviceIO_ReadPCIConfiguration(pdev,
-						  ATAConfiguration_ID_Device1Timing + ATAConfiguration_PCIOffset,
-						  ATAConfiguration_ID_Device1Timing_Size,
-						  &Device1TimingRegister);
-	if (result == FALSE) {
-		funcresult = FALSE;
-		goto funcexit;
-	}
-
-	ATATimingRegister |= ATAConfiguration_PrimaryTiming_Device1TimingRegisterEnable;
-
-	switch (DeviceID) {
-	case 0:
-		/* mask clear */
-		ATATimingRegister &= ~(ATAConfiguration_PrimaryTiming_Device0FastTimingEnable |
-				      ATAConfiguration_PrimaryTiming_Device0IORDYSampleModeEnable |
-				      ATAConfiguration_PrimaryTiming_Device0PrefetchandPostingEnable |
-				      ATAConfiguration_PrimaryTiming_Device0DMATimingEnable |
-				      ATAConfiguration_PrimaryTiming_Device0RecoveryMode |
-				      ATAConfiguration_PrimaryTiming_Device0IORDYSampleMode);
-
-		if (PIOTimingMode > PIO0)
-			ATATimingRegister |= ATAConfiguration_PrimaryTiming_Device0FastTimingEnable;
-
-		if (PIOTimingMode >= PIO3)
-			ATATimingRegister |= ATAConfiguration_PrimaryTiming_Device0IORDYSampleModeEnable;
-
-		if (PIOTimingMode >= PIO2 && PrefetchPostingEnable == TRUE)
-			ATATimingRegister |= ATAConfiguration_PrimaryTiming_Device0PrefetchandPostingEnable;
-
-		if (DMAEnable == TRUE && PIOTimingMode >= PIO2)
-			ATATimingRegister |= ATAConfiguration_PrimaryTiming_Device0DMATimingEnable;
-
-		if (PIOTimingMode <= PIO2)
-			ATATimingRegister |= ATAConfiguration_PrimaryTiming_Device0RecoveryMode_0;
-		else if (PIOTimingMode == PIO3)
-			ATATimingRegister |= ATAConfiguration_PrimaryTiming_Device0RecoveryMode_1;
-		else if (PIOTimingMode == PIO4)
-			ATATimingRegister |= ATAConfiguration_PrimaryTiming_Device0RecoveryMode_3;
-
-		if (PIOTimingMode <= PIO1)
-			ATATimingRegister |= ATAConfiguration_PrimaryTiming_Device0IORDYSampleMode_0;
-		else if (PIOTimingMode == PIO2)
-			ATATimingRegister |= ATAConfiguration_PrimaryTiming_Device0IORDYSampleMode_1;
-		else if (PIOTimingMode <= PIO4)
-			ATATimingRegister |= ATAConfiguration_PrimaryTiming_Device0IORDYSampleMode_2;
-		break;
-	case 1:
-		ATATimingRegister &= ~(ATAConfiguration_PrimaryTiming_Device1FastTimingEnable |
-				       ATAConfiguration_PrimaryTiming_Device1IORDYSampleModeEnable |
-				       ATAConfiguration_PrimaryTiming_Device1PrefetchandPostingEnable |
-				       ATAConfiguration_PrimaryTiming_Device1DMATimingEnable);
-
-		if (PIOTimingMode > PIO0)
-			ATATimingRegister |= ATAConfiguration_PrimaryTiming_Device1FastTimingEnable;
-
-		if (PIOTimingMode >= PIO3)
-			ATATimingRegister |= ATAConfiguration_PrimaryTiming_Device1IORDYSampleModeEnable;
-
-		if (PIOTimingMode >= PIO2 && PrefetchPostingEnable == TRUE)
-			ATATimingRegister |= ATAConfiguration_PrimaryTiming_Device1PrefetchandPostingEnable;
-
-		if (DMAEnable == TRUE && PIOTimingMode >= PIO2)
-			ATATimingRegister |= ATAConfiguration_PrimaryTiming_Device1DMATimingEnable;
-
-		Device1TimingRegister &= ~(ATAConfiguration_Device1Timing_PrimaryRecoveryMode |
-					   ATAConfiguration_Device1Timing_PrimaryIORDYSampleMode);
-
-		if (PIOTimingMode <= PIO2)
-			Device1TimingRegister |= ATAConfiguration_Device1Timing_PrimaryRecoveryMode_0;
-		else if (PIOTimingMode == PIO3)
-			Device1TimingRegister |= ATAConfiguration_Device1Timing_PrimaryRecoveryMode_1;
-		else if (PIOTimingMode == PIO4)
-			Device1TimingRegister |= ATAConfiguration_Device1Timing_PrimaryRecoveryMode_3;
-
-		if (PIOTimingMode <= PIO1)
-			Device1TimingRegister |= ATAConfiguration_Device1Timing_PrimaryIORDYSampleMode_0;
-		else if (PIOTimingMode == PIO2)
-			Device1TimingRegister |= ATAConfiguration_Device1Timing_PrimaryIORDYSampleMode_1;
-		else if (PIOTimingMode <= PIO4)
-			Device1TimingRegister |= ATAConfiguration_Device1Timing_PrimaryIORDYSampleMode_2;
-		break;
-	default:
-		funcresult = FALSE;
-		goto funcexit;
-		break;
-	}
-
-	result = PCIDeviceIO_WritePCIConfiguration(pdev,
-						   ATAConfiguration_ID_PrimaryTiming + ATAConfiguration_PCIOffset,
-						   ATAConfiguration_ID_PrimaryTiming_Size,
-						   &ATATimingRegister);
-	if (result == FALSE) {
-		funcresult = FALSE;
-		goto funcexit;
-	}
-
-	result = PCIDeviceIO_WritePCIConfiguration(pdev,
-						   ATAConfiguration_ID_Device1Timing + ATAConfiguration_PCIOffset,
-						   ATAConfiguration_ID_Device1Timing_Size,
-						   &Device1TimingRegister);
-	if (result == FALSE) {
-		funcresult = FALSE;
-		goto funcexit;
-	}
-
-	goto funcexit;
-funcexit:
-
-	return funcresult;
-}
-
-static uint ATAHostAdapter_SetSecondaryPIO(struct pci_dev *pdev, uint DeviceID,
-					   uint PIOTimingMode, uint DMAEnable,
-					   uint PrefetchPostingEnable)
-{
-	uint funcresult;
-	uint result;
-	uint ATATimingRegister;
-	uint Device1TimingRegister;
-
-	funcresult = TRUE;
-
-	ATATimingRegister = 0;
-	Device1TimingRegister = 0;
-
-	result = PCIDeviceIO_ReadPCIConfiguration(pdev,
-						  ATAConfiguration_ID_SecondaryTiming + ATAConfiguration_PCIOffset,
-						  ATAConfiguration_ID_SecondaryTiming_Size,
-						  &ATATimingRegister);
-	if (result == FALSE) {
-		funcresult = FALSE;
-		goto funcexit;
-	}
-
-	result = PCIDeviceIO_ReadPCIConfiguration(pdev,
-						  ATAConfiguration_ID_Device1Timing + ATAConfiguration_PCIOffset,
-						  ATAConfiguration_ID_Device1Timing_Size,
-						  &Device1TimingRegister);
-	if (result == FALSE) {
-		funcresult = FALSE;
-		goto funcexit;
-	}
-
-	ATATimingRegister |= ATAConfiguration_PrimaryTiming_Device1TimingRegisterEnable;
-
-	switch (DeviceID) {
-	case 0:
-		/* mask clear */
-		ATATimingRegister &= ~(ATAConfiguration_PrimaryTiming_Device0FastTimingEnable |
-				       ATAConfiguration_PrimaryTiming_Device0IORDYSampleModeEnable |
-				       ATAConfiguration_PrimaryTiming_Device0PrefetchandPostingEnable |
-				       ATAConfiguration_PrimaryTiming_Device0DMATimingEnable |
-				       ATAConfiguration_PrimaryTiming_Device0RecoveryMode |
-				       ATAConfiguration_PrimaryTiming_Device0IORDYSampleMode);
-
-		if (PIOTimingMode > PIO0)
-			ATATimingRegister |= ATAConfiguration_PrimaryTiming_Device0FastTimingEnable;
-
-		if (PIOTimingMode >= PIO3)
-			ATATimingRegister |= ATAConfiguration_PrimaryTiming_Device0IORDYSampleModeEnable;
-
-		if (PIOTimingMode >= PIO2 && PrefetchPostingEnable == TRUE)
-			ATATimingRegister |= ATAConfiguration_PrimaryTiming_Device0PrefetchandPostingEnable;
-
-		if (DMAEnable == TRUE && PIOTimingMode >= PIO2)
-			ATATimingRegister |= ATAConfiguration_PrimaryTiming_Device0DMATimingEnable;
-
-		if (PIOTimingMode <= PIO2)
-			ATATimingRegister |= ATAConfiguration_PrimaryTiming_Device0RecoveryMode_0;
-		else if (PIOTimingMode == PIO3)
-			ATATimingRegister |= ATAConfiguration_PrimaryTiming_Device0RecoveryMode_1;
-		else if (PIOTimingMode == PIO4)
-			ATATimingRegister |= ATAConfiguration_PrimaryTiming_Device0RecoveryMode_3;
-
-		if (PIOTimingMode <= PIO1)
-			ATATimingRegister |= ATAConfiguration_PrimaryTiming_Device0IORDYSampleMode_0;
-		else if (PIOTimingMode == PIO2)
-			ATATimingRegister |= ATAConfiguration_PrimaryTiming_Device0IORDYSampleMode_1;
-		else if (PIOTimingMode <= PIO4)
-			ATATimingRegister |= ATAConfiguration_PrimaryTiming_Device0IORDYSampleMode_2;
-		break;
-	case 1:
-		ATATimingRegister &= ~(ATAConfiguration_PrimaryTiming_Device1FastTimingEnable |
-				       ATAConfiguration_PrimaryTiming_Device1IORDYSampleModeEnable |
-				       ATAConfiguration_PrimaryTiming_Device1PrefetchandPostingEnable |
-				       ATAConfiguration_PrimaryTiming_Device1DMATimingEnable);
-
-		if (PIOTimingMode > PIO0)
-			ATATimingRegister |= ATAConfiguration_PrimaryTiming_Device1FastTimingEnable;
-
-		if (PIOTimingMode >= PIO3)
-			ATATimingRegister |= ATAConfiguration_PrimaryTiming_Device1IORDYSampleModeEnable;
-
-		if (PIOTimingMode >= PIO2 && PrefetchPostingEnable == TRUE)
-			ATATimingRegister |= ATAConfiguration_PrimaryTiming_Device1PrefetchandPostingEnable;
-
-		if (DMAEnable == TRUE && PIOTimingMode >= PIO2)
-			ATATimingRegister |= ATAConfiguration_PrimaryTiming_Device1DMATimingEnable;
-
-		Device1TimingRegister &= ~(ATAConfiguration_Device1Timing_SecondaryRecoveryMode |
-					   ATAConfiguration_Device1Timing_SecondaryIORDYSampleMode);
-
-		if (PIOTimingMode <= PIO2)
-			Device1TimingRegister |= ATAConfiguration_Device1Timing_SecondaryRecoveryMode_0;
-		else if (PIOTimingMode == PIO3)
-			Device1TimingRegister |= ATAConfiguration_Device1Timing_SecondaryRecoveryMode_1;
-		else if (PIOTimingMode == PIO4)
-			Device1TimingRegister |= ATAConfiguration_Device1Timing_SecondaryRecoveryMode_3;
-
-		if (PIOTimingMode <= PIO1)
-			Device1TimingRegister |= ATAConfiguration_Device1Timing_SecondaryIORDYSampleMode_0;
-		else if (PIOTimingMode == PIO2)
-			Device1TimingRegister |= ATAConfiguration_Device1Timing_SecondaryIORDYSampleMode_1;
-		else if (PIOTimingMode <= PIO4)
-			Device1TimingRegister |= ATAConfiguration_Device1Timing_SecondaryIORDYSampleMode_2;
-		break;
-	default:
-		funcresult = FALSE;
-		goto funcexit;
-		break;
-	}
-
-	result = PCIDeviceIO_WritePCIConfiguration(pdev,
-						   ATAConfiguration_ID_SecondaryTiming + ATAConfiguration_PCIOffset,
-						   ATAConfiguration_ID_SecondaryTiming_Size,
-						   &ATATimingRegister);
-	if (result == FALSE) {
-		funcresult = FALSE;
-		goto funcexit;
-	}
-
-	result = PCIDeviceIO_WritePCIConfiguration(pdev,
-						   ATAConfiguration_ID_Device1Timing + ATAConfiguration_PCIOffset,
-						   ATAConfiguration_ID_Device1Timing_Size,
-						   &Device1TimingRegister);
-	if (result == FALSE) {
-		funcresult = FALSE;
-		goto funcexit;
-	}
-
-	goto funcexit;
-funcexit:
-	return funcresult;
-}
-
-static uint ATAHostAdapter_SetPrimaryUDMA(struct pci_dev *pdev, uint DeviceID,
-					  uint UDMAEnable, uint UDMATimingMode)
-{
-	uint funcresult;
-	uint result;
-	uint UDMAControlRegister;
-	uint UDMATimingRegister;
-	ulong IDEIOConfigurationRegister;
-
-	funcresult = TRUE;
-	UDMAControlRegister = 0;
-	UDMATimingRegister = 0;
-	IDEIOConfigurationRegister = 0;
-
-	result = PCIDeviceIO_ReadPCIConfiguration(pdev,
-						  ATAConfiguration_ID_UDMAControl + ATAConfiguration_PCIOffset,
-						  ATAConfiguration_ID_UDMAControl_Size,
-						  &UDMAControlRegister);
-	if (result == FALSE) {
-		funcresult = FALSE;
-		goto funcexit;
-	}
-
-	result = PCIDeviceIO_ReadPCIConfiguration(pdev,
-						  ATAConfiguration_ID_UDMATiming + ATAConfiguration_PCIOffset,
-						  ATAConfiguration_ID_UDMATiming_Size,
-						  &UDMATimingRegister);
-	if (result == FALSE) {
-		funcresult = FALSE;
-		goto funcexit;
-	}
-
-	result = PCIDeviceIO_ReadPCIConfiguration(pdev,
-						  ATAConfiguration_ID_IDEIOConfiguration + ATAConfiguration_PCIOffset,
-						  ATAConfiguration_ID_IDEIOConfiguration_Size,
-						  &IDEIOConfigurationRegister);
-	if (result == FALSE) {
-		funcresult = FALSE;
-		goto funcexit;
-	}
-
-	/*Rom Code will determine the device cable type and ATA 100.*/
-	/*IDEIOConfigurationRegister |= ATAConfiguration_IDEIOConfiguration_DeviceCable80Report;*/
-	/*IDEIOConfigurationRegister |= ATAConfiguration_IDEIOConfiguration_ATA100IsSupported;*/
-
-	switch (DeviceID) {
-	case 0:
-		UDMAControlRegister &= ~(ATAConfiguration_UDMAControl_PrimaryDevice0UDMAModeEnable);
-		if (UDMAEnable == TRUE)
-			UDMAControlRegister |= ATAConfiguration_UDMAControl_PrimaryDevice0UDMAModeEnable;
-
-		IDEIOConfigurationRegister &= ~(ATAConfiguration_IDEIOConfiguration_PrimaryDevice066MhzEnable |
-						ATAConfiguration_IDEIOConfiguration_PrimaryDevice0100MhzEnable);
-
-		if (UDMATimingMode >= UDMA5)
-			IDEIOConfigurationRegister |= ATAConfiguration_IDEIOConfiguration_PrimaryDevice0100MhzEnable;
-		else if (UDMATimingMode >= UDMA3)
-			IDEIOConfigurationRegister |= ATAConfiguration_IDEIOConfiguration_PrimaryDevice066MhzEnable;
-
-		/* if 80 cable report */
-		UDMATimingRegister &= ~(ATAConfiguration_UDMATiming_PrimaryDevice0CycleTime);
-
-		if (UDMATimingMode == UDMA0) {
-			UDMATimingRegister |= ATAConfiguration_UDMATiming_PrimaryDevice0CycleTime_0;
-		} else if (UDMATimingMode == UDMA1 ||
-			   UDMATimingMode == UDMA3 ||
-			   UDMATimingMode == UDMA5) {
-			UDMATimingRegister |= ATAConfiguration_UDMATiming_PrimaryDevice0CycleTime_1;
-		} else if (UDMATimingMode == UDMA2 ||
-			   UDMATimingMode == UDMA4) {
-			UDMATimingRegister |= ATAConfiguration_UDMATiming_PrimaryDevice0CycleTime_2;
-		}
-		break;
-	case 1:
-		UDMAControlRegister &= ~(ATAConfiguration_UDMAControl_PrimaryDevice1UDMAModeEnable);
-		if (UDMAEnable == TRUE)
-			UDMAControlRegister |= ATAConfiguration_UDMAControl_PrimaryDevice1UDMAModeEnable;
-
-		IDEIOConfigurationRegister &= ~(ATAConfiguration_IDEIOConfiguration_PrimaryDevice166MhzEnable |
-						ATAConfiguration_IDEIOConfiguration_PrimaryDevice1100MhzEnable);
-
-		if (UDMATimingMode >= UDMA5)
-			IDEIOConfigurationRegister |= ATAConfiguration_IDEIOConfiguration_PrimaryDevice1100MhzEnable;
-		else if (UDMATimingMode >= UDMA3)
-			IDEIOConfigurationRegister |= ATAConfiguration_IDEIOConfiguration_PrimaryDevice166MhzEnable;
-
-		/* if 80 cable report */
-		UDMATimingRegister &= ~(ATAConfiguration_UDMATiming_PrimaryDevice1CycleTime);
-
-		if (UDMATimingMode == UDMA0) {
-			UDMATimingRegister |= ATAConfiguration_UDMATiming_PrimaryDevice1CycleTime_0;
-		} else if (UDMATimingMode == UDMA1 ||
-			   UDMATimingMode == UDMA3 ||
-			   UDMATimingMode == UDMA5) {
-			UDMATimingRegister |= ATAConfiguration_UDMATiming_PrimaryDevice1CycleTime_1;
-		} else if (UDMATimingMode == UDMA2 ||
-			   UDMATimingMode == UDMA4) {
-			UDMATimingRegister |= ATAConfiguration_UDMATiming_PrimaryDevice1CycleTime_2;
-		}
-		break;
-	default:
-		funcresult = FALSE;
-		goto funcexit;
-		break;
-	}
-
-	result = PCIDeviceIO_WritePCIConfiguration(pdev,
-						   ATAConfiguration_ID_UDMAControl + ATAConfiguration_PCIOffset,
-						   ATAConfiguration_ID_UDMAControl_Size,
-						   &UDMAControlRegister);
-	if (result == FALSE) {
-		funcresult = FALSE;
-		goto funcexit;
-	}
-
-	result = PCIDeviceIO_WritePCIConfiguration(pdev,
-						   ATAConfiguration_ID_UDMATiming + ATAConfiguration_PCIOffset,
-						   ATAConfiguration_ID_UDMATiming_Size,
-						   &UDMATimingRegister);
-	if (result == FALSE) {
-		funcresult = FALSE;
-		goto funcexit;
-	}
-
-	result = PCIDeviceIO_WritePCIConfiguration(pdev,
-						   ATAConfiguration_ID_IDEIOConfiguration + ATAConfiguration_PCIOffset,
-						   ATAConfiguration_ID_IDEIOConfiguration_Size,
-						   &IDEIOConfigurationRegister);
-	if (result == FALSE) {
-		funcresult = FALSE;
-		goto funcexit;
-	}
-
-	goto funcexit;
-funcexit:
-	return funcresult;
-}
-
-static uint ATAHostAdapter_SetSecondaryUDMA(struct pci_dev *pdev, uint DeviceID,
-					    uint UDMAEnable, uint UDMATimingMode)
-{
-	uint funcresult;
-	uint result;
-	uint UDMAControlRegister;
-	uint UDMATimingRegister;
-	ulong IDEIOConfigurationRegister;
-
-	funcresult = TRUE;
-
-	UDMAControlRegister = 0;
-	UDMATimingRegister = 0;
-	IDEIOConfigurationRegister = 0;
-
-	result = PCIDeviceIO_ReadPCIConfiguration(pdev,
-						  ATAConfiguration_ID_UDMAControl + ATAConfiguration_PCIOffset,
-						  ATAConfiguration_ID_UDMAControl_Size,
-						  &UDMAControlRegister);
-	if (result == FALSE) {
-		funcresult = FALSE;
-		goto funcexit;
-	}
-
-	result = PCIDeviceIO_ReadPCIConfiguration(pdev,
-						  ATAConfiguration_ID_UDMATiming + ATAConfiguration_PCIOffset,
-						  ATAConfiguration_ID_UDMATiming_Size,
-						  &UDMATimingRegister);
-	if (result == FALSE) {
-		funcresult = FALSE;
-		goto funcexit;
-	}
-
-	result = PCIDeviceIO_ReadPCIConfiguration(pdev,
-						  ATAConfiguration_ID_IDEIOConfiguration + ATAConfiguration_PCIOffset,
-						  ATAConfiguration_ID_IDEIOConfiguration_Size,
-						  &IDEIOConfigurationRegister);
-	if (result == FALSE) {
-		funcresult = FALSE;
-		goto funcexit;
-	}
-
-	/* Rom Code will determine the device cable type and ATA 100. */
-	/* IDEIOConfigurationRegister |= ATAConfiguration_IDEIOConfiguration_DeviceCable80Report; */
-	/* IDEIOConfigurationRegister |= ATAConfiguration_IDEIOConfiguration_ATA100IsSupported; */
-
-	switch (DeviceID) {
-	case 0:
-		UDMAControlRegister &= ~(ATAConfiguration_UDMAControl_SecondaryDevice0UDMAModeEnable);
-		if (UDMAEnable == TRUE)
-			UDMAControlRegister |= ATAConfiguration_UDMAControl_SecondaryDevice0UDMAModeEnable;
-
-		IDEIOConfigurationRegister &= ~(ATAConfiguration_IDEIOConfiguration_SecondaryDevice066MhzEnable |
-						ATAConfiguration_IDEIOConfiguration_SecondaryDevice0100MhzEnable);
-
-		if (UDMATimingMode >= UDMA5)
-			IDEIOConfigurationRegister |= ATAConfiguration_IDEIOConfiguration_SecondaryDevice0100MhzEnable;
-		else if (UDMATimingMode >= UDMA3)
-			IDEIOConfigurationRegister |= ATAConfiguration_IDEIOConfiguration_SecondaryDevice066MhzEnable;
-
-		/* if 80 cable report */
-		UDMATimingRegister &= ~(ATAConfiguration_UDMATiming_SecondaryDevice0CycleTime);
-
-		if (UDMATimingMode == UDMA0) {
-			UDMATimingRegister |= ATAConfiguration_UDMATiming_SecondaryDevice0CycleTime_0;
-		} else if (UDMATimingMode == UDMA1 ||
-			   UDMATimingMode == UDMA3 ||
-			   UDMATimingMode == UDMA5) {
-			UDMATimingRegister |= ATAConfiguration_UDMATiming_SecondaryDevice0CycleTime_1;
-		} else if (UDMATimingMode == UDMA2 ||
-			   UDMATimingMode == UDMA4) {
-			UDMATimingRegister |= ATAConfiguration_UDMATiming_SecondaryDevice0CycleTime_2;
-		}
-		break;
-	case 1:
-		UDMAControlRegister &= ~(ATAConfiguration_UDMAControl_SecondaryDevice1UDMAModeEnable);
-		if (UDMAEnable == TRUE)
-			UDMAControlRegister |= ATAConfiguration_UDMAControl_SecondaryDevice1UDMAModeEnable;
-
-		IDEIOConfigurationRegister &= ~(ATAConfiguration_IDEIOConfiguration_SecondaryDevice166MhzEnable |
-						ATAConfiguration_IDEIOConfiguration_SecondaryDevice1100MhzEnable);
-
-		if (UDMATimingMode >= UDMA5)
-			IDEIOConfigurationRegister |= ATAConfiguration_IDEIOConfiguration_SecondaryDevice1100MhzEnable;
-		else if (UDMATimingMode >= UDMA3)
-			IDEIOConfigurationRegister |= ATAConfiguration_IDEIOConfiguration_SecondaryDevice166MhzEnable;
-
-		/* if 80 cable report */
-		UDMATimingRegister &= ~(ATAConfiguration_UDMATiming_SecondaryDevice1CycleTime);
-
-		if (UDMATimingMode == UDMA0) {
-			UDMATimingRegister |= ATAConfiguration_UDMATiming_SecondaryDevice1CycleTime_0;
-		} else if (UDMATimingMode == UDMA1 ||
-			   UDMATimingMode == UDMA3 ||
-			   UDMATimingMode == UDMA5) {
-			UDMATimingRegister |= ATAConfiguration_UDMATiming_SecondaryDevice1CycleTime_1;
-		} else if (UDMATimingMode == UDMA2 ||
-			   UDMATimingMode == UDMA4) {
-			UDMATimingRegister |= ATAConfiguration_UDMATiming_SecondaryDevice1CycleTime_2;
-		}
-		break;
-	default:
-		funcresult = FALSE;
-		goto funcexit;
-		break;
-	}
-
-	result = PCIDeviceIO_WritePCIConfiguration(pdev,
-						   ATAConfiguration_ID_UDMAControl + ATAConfiguration_PCIOffset,
-						   ATAConfiguration_ID_UDMAControl_Size,
-						   &UDMAControlRegister);
-	if (result == FALSE) {
-		funcresult = FALSE;
-		goto funcexit;
-	}
-
-	result = PCIDeviceIO_WritePCIConfiguration(pdev,
-						   ATAConfiguration_ID_UDMATiming + ATAConfiguration_PCIOffset,
-						   ATAConfiguration_ID_UDMATiming_Size,
-						   &UDMATimingRegister);
-	if (result == FALSE) {
-		funcresult = FALSE;
-		goto funcexit;
-	}
-
-	result = PCIDeviceIO_WritePCIConfiguration(pdev,
-						   ATAConfiguration_ID_IDEIOConfiguration + ATAConfiguration_PCIOffset,
-						   ATAConfiguration_ID_IDEIOConfiguration_Size,
-						   &IDEIOConfigurationRegister);
-	if (result == FALSE) {
-		funcresult = FALSE;
-		goto funcexit;
-	}
-
-	goto funcexit;
-funcexit:
-	return funcresult;
-}
-
-static int rdc_pata_port_start(struct ata_port *ap)
-{
-	uint    Channel;
-
-	Channel = ap->port_no;
-	dev_dbg(ap->dev, "%s: Channel: %u\n", __func__, Channel);
-	if (ap->ioaddr.bmdma_addr) {
-		return ata_port_start(ap);
-	} else {
-		dev_dbg(ap->dev, "%s: return 0!!!\n", __func__);
-		return 0;
-	}
-}
-
-static void rdc_pata_port_stop(struct ata_port *ap)
-{
-	uint    Channel;
-
-	Channel = ap->port_no;
-
-	dev_dbg(ap->dev, "%s Channel: %u\n", __func__, Channel);
-}
-
-static int rdc_pata_prereset(struct ata_link *link, unsigned long deadline)
-{
-	struct pci_dev *pdev;
-	struct ata_port *ap;
-	uint Channel;
-
-	dev_dbg(link->ap->dev, "%s\n", __func__);
-
-	ap = link->ap;
-	pdev = to_pci_dev(ap->host->dev);
-
-	Channel = ap->port_no;
-
-	/* test ATA Decode Enable Bits, should be enable. */
-	if (!pci_test_config_bits(pdev, &ATA_Decode_Enable_Bits[Channel])) {
-		dev_dbg(link->ap->dev, "%s: Channel: %u, Decode Disable\n",
-			__func__, Channel);
-		return -ENOENT;
-	} else {
-		dev_dbg(link->ap->dev, "%s: Channel: %u, Decode Enable\n",
-			__func__, Channel);
-		return ata_std_prereset(link, deadline);
-	}
-}
-
-static int rdc_pata_cable_detect(struct ata_port *ap)
-{
-	struct pci_dev *pdev;
-	uint Channel;
-	uint Mask;
-	u32 u32Value;
-
-	dev_dbg(ap->dev, "%s\n", __func__);
-
-	pdev = to_pci_dev(ap->host->dev);
-
-	Channel = ap->port_no;
-
-	if (Channel == 0)
-		Mask = ATAConfiguration_IDEIOConfiguration_PrimaryDeviceCable80Report;
-	else
-		Mask = ATAConfiguration_IDEIOConfiguration_SecondaryDeviceCable80Report;
-
-	/* check BIOS cable detect results */
-	pci_read_config_dword(pdev, ATAConfiguration_ID_IDEIOConfiguration + ATAConfiguration_PCIOffset, &u32Value);
-
-	if ((u32Value & Mask) == 0) {
-		dev_dbg(ap->dev, "%s: Channel: %u, PATA40 \n",
-			__func__, Channel);
-		return ATA_CBL_PATA40;
-	} else {
-		dev_dbg(ap->dev, "%s: Channel: %u, PATA80 \n",
-			__func__, Channel);
-		return ATA_CBL_PATA80;
-	}
-}
-
-static void rdc_pata_set_piomode(struct ata_port *ap, struct ata_device *adev)
-{
-	struct pci_dev *pdev;
-	uint    Channel;
-	uint    DeviceID;
-	uint    PIOTimingMode;
-	uint    PrefetchPostingEnable;
-
-	dev_dbg(ap->dev, "%s\n", __func__);
-
-	pdev = to_pci_dev(ap->host->dev);
-
-	Channel = ap->port_no;
-	DeviceID = adev->devno;
-	/*
-	 * piomode = 0, 1, 2, 3... ; adev->pio_mode = XFER_PIO_0, XFER_PIO_1,
-	 * XFER_PIO_2, XFER_PIO_3...
-	 */
-	PIOTimingMode = adev->pio_mode - XFER_PIO_0;
-
-	if (adev->class == ATA_DEV_ATA) {
-		PrefetchPostingEnable = TRUE;
-	} else {
-		/* ATAPI, CD DVD Rom */
-		PrefetchPostingEnable = FALSE;
-	}
-
-	/* PIO configuration clears DTE unconditionally.  It will be
-	 * programmed in set_dmamode which is guaranteed to be called
-	 * after set_piomode if any DMA mode is available.
-	 */
-
-	/* Ensure the UDMA bit is off - it will be turned back on if UDMA is
-	 * selected */
-
-	if (Channel == 0) {
-		ATAHostAdapter_SetPrimaryPIO(
-		    pdev,
-		    DeviceID,
-		    PIOTimingMode,
-		    TRUE,
-		    PrefetchPostingEnable
-		    );
-
-		ATAHostAdapter_SetPrimaryUDMA(
-		    pdev,
-		    DeviceID,
-		    FALSE,
-		    UDMA0
-		    );
-	} else {
-		ATAHostAdapter_SetSecondaryPIO(
-		    pdev,
-		    DeviceID,
-		    PIOTimingMode,
-		    TRUE,
-		    PrefetchPostingEnable
-		    );
-
-		ATAHostAdapter_SetSecondaryUDMA(
-		    pdev,
-		    DeviceID,
-		    FALSE,
-		    UDMA0
-		    );
-	}
-	dev_dbg(ap->dev, "%s: Channel: %u, DeviceID: %u, PIO: %d\n",
-		__func__, Channel, DeviceID, PIOTimingMode);
-}
-
-static void rdc_pata_set_dmamode(struct ata_port *ap, struct ata_device *adev)
-{
-	struct pci_dev *pdev;
-	uint    Channel;
-	uint    DeviceID;
-	uint    PIOTimingMode;
-	uint    PrefetchPostingEnable;
-	uint    DMATimingMode;
-	uint    UDMAEnable;
-
-	dev_dbg(ap->dev, "%s\n", __func__);
-
-	pdev = to_pci_dev(ap->host->dev);
-
-	Channel = ap->port_no;
-	DeviceID = adev->devno;
-	PIOTimingMode = adev->pio_mode - XFER_PIO_0;  /* piomode = 0, 1, 2, 3... ; adev->pio_mode = XFER_PIO_0, XFER_PIO_1, XFER_PIO_2, XFER_PIO_3... */
-	DMATimingMode = adev->dma_mode; /* UDMA or MDMA */
-
-	if (adev->class == ATA_DEV_ATA) {
-		PrefetchPostingEnable = TRUE;
-	} else {
-		/* ATAPI, CD DVD Rom */
-		PrefetchPostingEnable = FALSE;
-	}
-
-	if (ap->udma_mask == 0) {
-		/* ata_port dont support udma. depend on hardware spec. */
-		UDMAEnable = FALSE;
-	} else {
-		UDMAEnable = TRUE;
-	}
-
-	if (Channel == 0) {
-		if (DMATimingMode >= XFER_UDMA_0) {
-			/* UDMA */
-			ATAHostAdapter_SetPrimaryPIO(pdev,
-				DeviceID,
-				PIOTimingMode,
-				TRUE,
-				PrefetchPostingEnable);
-
-			ATAHostAdapter_SetPrimaryUDMA(pdev,
-				DeviceID,
-				UDMAEnable,
-				DMATimingMode - XFER_UDMA_0);
-			dev_dbg(ap->dev,
-				"%s: Channel: %u, DeviceID: %u, UDMA: %u\n",
-				__func__, Channel, DeviceID,
-				(uint)(DMATimingMode - XFER_UDMA_0));
-		} else {
-			/* MDMA */
-			ATAHostAdapter_SetPrimaryPIO(pdev,
-				DeviceID,
-				(DMATimingMode - XFER_MW_DMA_0) + PIO2, /* MDMA0 = PIO2 */
-				TRUE,
-				PrefetchPostingEnable);
-
-			ATAHostAdapter_SetPrimaryUDMA(pdev,
-				DeviceID,
-				FALSE,
-				UDMA0);
-			dev_dbg(ap->dev,
-				"%s: Channel: %u, DeviceID: %u, MDMA: %u\n",
-				__func__, Channel, DeviceID,
-				(uint)(DMATimingMode - XFER_MW_DMA_0));
-		}
-	} else {
-		if (DMATimingMode >= XFER_UDMA_0) {
-			/* UDMA */
-			ATAHostAdapter_SetSecondaryPIO(pdev,
-				DeviceID,
-				PIOTimingMode,
-				TRUE,
-				PrefetchPostingEnable);
-
-			ATAHostAdapter_SetSecondaryUDMA(pdev,
-				DeviceID,
-				UDMAEnable,
-				DMATimingMode - XFER_UDMA_0);
-			dev_dbg(ap->dev,
-				"%s: Channel: %u, DeviceID: %u, UDMA: %u\n",
-				__func__, Channel, DeviceID,
-				(uint)(DMATimingMode - XFER_UDMA_0));
-		} else {
-			/* MDMA */
-			ATAHostAdapter_SetSecondaryPIO(pdev,
-				DeviceID,
-				(DMATimingMode - XFER_MW_DMA_0) + PIO2, /* MDMA0 = PIO2 */
-				TRUE,
-				PrefetchPostingEnable);
-
-			ATAHostAdapter_SetSecondaryUDMA(pdev,
-				DeviceID,
-				FALSE,
-				UDMA0);
-			dev_dbg(ap->dev,
-				"%s: Channel: %u, DeviceID: %u, MDMA: %u \n",
-				__func__, Channel, DeviceID,
-				(uint)(DMATimingMode - XFER_MW_DMA_0));
-		}
-	}
-}
-
-static struct scsi_host_template rdc_pata_sht = {
-	ATA_BMDMA_SHT(KBUILD_MODNAME),
-};
-
-static struct ata_port_operations rdc_pata_ops = {
-	.inherits	= &ata_bmdma_port_ops,
-
-	.port_start	= rdc_pata_port_start,
-	.port_stop	= rdc_pata_port_stop,
-	.prereset	= rdc_pata_prereset,
-	.cable_detect	= rdc_pata_cable_detect,
-	.set_piomode	= rdc_pata_set_piomode,
-	.set_dmamode	= rdc_pata_set_dmamode,
-};
-
-static struct ata_port_info rdc_pata_port_info[] = {
-	[RDC_17F31011] = {
-	.flags		= ATA_FLAG_SLAVE_POSS,
-	.pio_mask	= 0x1f,		/* pio0-4 */
-	.mwdma_mask	= 0x07,		/* mwdma0-2 */
-	.udma_mask	= ATA_UDMA5,	/* udma0-5 */
-	.port_ops	= &rdc_pata_ops,
-	},
-
-	[RDC_17F31012] = {
-	.flags		= ATA_FLAG_SLAVE_POSS,
-	.pio_mask	= 0x1f,		/* pio0-4 */
-	.mwdma_mask	= 0x07,		/* mwdma0-2 */
-	.udma_mask	= ATA_UDMA5,	/* udma0-5 */
-	.port_ops	= &rdc_pata_ops,
-	},
-};
-
-static int __devinit rdc_init_one(struct pci_dev *pdev,
-				  const struct pci_device_id *ent)
-{
-	struct ata_port_info port_info[2];
-	const struct ata_port_info *ppinfo[] = { &port_info[0], &port_info[1] };
-
-	int rc;
-
-	dev_dbg(&pdev->dev, "%s\n", __func__);
-
-	port_info[0] = rdc_pata_port_info[ent->driver_data];
-	port_info[1] = rdc_pata_port_info[ent->driver_data];
-
-	rc = pci_enable_device(pdev);
-	if (rc) {
-		dev_dbg(&pdev->dev, "%s pci_enable_device failed\n", __func__);
-		return rc;
-	}
-	pci_intx(pdev, 1);
-
-	return ata_pci_sff_init_one(pdev, ppinfo, &rdc_pata_sht, NULL);
-}
-
-static struct pci_driver rdc_pata_driver = {
-	.name		= KBUILD_MODNAME,
-	.id_table	= rdc_pata_id_table,
-	.probe		= rdc_init_one,
-	.remove		= ata_pci_remove_one,
-#ifdef CONFIG_PM
-	.suspend	= ata_pci_device_suspend,
-	.resume		= ata_pci_device_resume,
-#endif
-};
-
-static int __init pata_rdc_init(void)
-{
-	return pci_register_driver(&rdc_pata_driver);
-}
-
-static void __exit pata_rdc_exit(void)
-{
-	pci_unregister_driver(&rdc_pata_driver);
-}
-
-module_init(pata_rdc_init);
-module_exit(pata_rdc_exit);
-
-MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("RDC PCI IDE Driver");

drivers/staging/pata_rdc/pata_rdc.h

@@ -1,144 +0,0 @@
-#ifndef pata_rdc_H
-#define pata_rdc_H
-
-#ifndef TRUE
-#define TRUE	1
-#endif
-
-#ifndef FALSE
-#define FALSE	0
-#endif
-
-/* ATA Configuration Register ID offset address size */
-#define ATAConfiguration_PCIOffset			0x40
-#define ATAConfiguration_ID_PrimaryTiming		0x00
-#define ATAConfiguration_ID_SecondaryTiming		0x02
-#define ATAConfiguration_ID_Device1Timing		0x04
-#define ATAConfiguration_ID_UDMAControl			0x08
-#define ATAConfiguration_ID_UDMATiming			0x0A
-#define ATAConfiguration_ID_IDEIOConfiguration		0x14
-
-#define ATAConfiguration_ID_PrimaryTiming_Size		2
-#define ATAConfiguration_ID_SecondaryTiming_Size	2
-#define ATAConfiguration_ID_Device1Timing_Size		1
-#define ATAConfiguration_ID_UDMAControl_Size		1
-#define ATAConfiguration_ID_UDMATiming_Size		2
-#define ATAConfiguration_ID_IDEIOConfiguration_Size	4
-
-/* ATA Configuration Register bit define */
-#define ATAConfiguration_PrimaryTiming_Device0FastTimingEnable		0x0001
-#define ATAConfiguration_PrimaryTiming_Device0IORDYSampleModeEnable	0x0002	/* PIO 3 or greater */
-#define ATAConfiguration_PrimaryTiming_Device0PrefetchandPostingEnable	0x0004	/* PIO 2 or greater */
-#define ATAConfiguration_PrimaryTiming_Device0DMATimingEnable		0x0008
-#define ATAConfiguration_PrimaryTiming_Device1FastTimingEnable		0x0010
-#define ATAConfiguration_PrimaryTiming_Device1IORDYSampleModeEnable	0x0020	/* PIO 3 or greater */
-#define ATAConfiguration_PrimaryTiming_Device1PrefetchandPostingEnable	0x0040	/* PIO 2 or greater */
-#define ATAConfiguration_PrimaryTiming_Device1DMATimingEnable		0x0080
-#define ATAConfiguration_PrimaryTiming_Device0RecoveryMode		0x0300
-#define ATAConfiguration_PrimaryTiming_Device0RecoveryMode_0		0x0000	/* PIO 0, PIO 2, MDMA 0 */
-#define ATAConfiguration_PrimaryTiming_Device0RecoveryMode_1		0x0100	/* PIO 3, MDMA 1 */
-#define ATAConfiguration_PrimaryTiming_Device0RecoveryMode_2		0x0200	/* X */
-#define ATAConfiguration_PrimaryTiming_Device0RecoveryMode_3		0x0300	/* PIO 4, MDMA 2 */
-#define ATAConfiguration_PrimaryTiming_Device0IORDYSampleMode		0x3000
-#define ATAConfiguration_PrimaryTiming_Device0IORDYSampleMode_0		0x0000	/* PIO 0 */
-#define ATAConfiguration_PrimaryTiming_Device0IORDYSampleMode_1		0x1000	/* PIO 2, MDMA 0 */
-#define ATAConfiguration_PrimaryTiming_Device0IORDYSampleMode_2		0x2000	/* PIO 3, PIO 4, MDMA 1, MDMA 2 */
-#define ATAConfiguration_PrimaryTiming_Device0IORDYSampleMode_3		0x3000	/* X */
-#define ATAConfiguration_PrimaryTiming_Device1TimingRegisterEnable	0x4000
-#define ATAConfiguration_PrimaryTiming_IDEDecodeEnable			0x8000
-
-#define ATAConfiguration_Device1Timing_PrimaryRecoveryMode		0x0003
-#define ATAConfiguration_Device1Timing_PrimaryRecoveryMode_0		0x0000
-#define ATAConfiguration_Device1Timing_PrimaryRecoveryMode_1		0x0001
-#define ATAConfiguration_Device1Timing_PrimaryRecoveryMode_2		0x0002
-#define ATAConfiguration_Device1Timing_PrimaryRecoveryMode_3		0x0003
-#define ATAConfiguration_Device1Timing_PrimaryIORDYSampleMode		0x000C
-#define ATAConfiguration_Device1Timing_PrimaryIORDYSampleMode_0		0x0000
-#define ATAConfiguration_Device1Timing_PrimaryIORDYSampleMode_1		0x0004
-#define ATAConfiguration_Device1Timing_PrimaryIORDYSampleMode_2		0x0008
-#define ATAConfiguration_Device1Timing_PrimaryIORDYSampleMode_3		0x000C
-#define ATAConfiguration_Device1Timing_SecondaryRecoveryMode		0x0030
-#define ATAConfiguration_Device1Timing_SecondaryRecoveryMode_0		0x0000
-#define ATAConfiguration_Device1Timing_SecondaryRecoveryMode_1		0x0010
-#define ATAConfiguration_Device1Timing_SecondaryRecoveryMode_2		0x0020
-#define ATAConfiguration_Device1Timing_SecondaryRecoveryMode_3		0x0030
-#define ATAConfiguration_Device1Timing_SecondaryIORDYSampleMode		0x00C0
-#define ATAConfiguration_Device1Timing_SecondaryIORDYSampleMode_0	0x0000
-#define ATAConfiguration_Device1Timing_SecondaryIORDYSampleMode_1	0x0040
-#define ATAConfiguration_Device1Timing_SecondaryIORDYSampleMode_2	0x0080
-#define ATAConfiguration_Device1Timing_SecondaryIORDYSampleMode_3	0x00C0
-
-#define ATAConfiguration_UDMAControl_PrimaryDevice0UDMAModeEnable	0x0001
-#define ATAConfiguration_UDMAControl_PrimaryDevice1UDMAModeEnable	0x0002
-#define ATAConfiguration_UDMAControl_SecondaryDevice0UDMAModeEnable	0x0004
-#define ATAConfiguration_UDMAControl_SecondaryDevice1UDMAModeEnable	0x0008
-
-#define ATAConfiguration_UDMATiming_PrimaryDevice0CycleTime		0x0003
-#define ATAConfiguration_UDMATiming_PrimaryDevice0CycleTime_0		0x0000	/* UDMA 0 */
-#define ATAConfiguration_UDMATiming_PrimaryDevice0CycleTime_1		0x0001	/* UDMA 1, UDMA 3, UDMA 5 */
-#define ATAConfiguration_UDMATiming_PrimaryDevice0CycleTime_2		0x0002	/* UDMA 2, UDMA 4 */
-#define ATAConfiguration_UDMATiming_PrimaryDevice0CycleTime_3		0x0003	/* X */
-#define ATAConfiguration_UDMATiming_PrimaryDevice1CycleTime		0x0030
-#define ATAConfiguration_UDMATiming_PrimaryDevice1CycleTime_0		0x0000	/* UDMA 0 */
-#define ATAConfiguration_UDMATiming_PrimaryDevice1CycleTime_1		0x0010	/* UDMA 1, UDMA 3, UDMA 5 */
-#define ATAConfiguration_UDMATiming_PrimaryDevice1CycleTime_2		0x0020	/* UDMA 2, UDMA 4 */
-#define ATAConfiguration_UDMATiming_PrimaryDevice1CycleTime_3		0x0030	/* X */
-#define ATAConfiguration_UDMATiming_SecondaryDevice0CycleTime		0x0300
-#define ATAConfiguration_UDMATiming_SecondaryDevice0CycleTime_0		0x0000	/* UDMA 0 */
-#define ATAConfiguration_UDMATiming_SecondaryDevice0CycleTime_1		0x0100	/* UDMA 1, UDMA 3, UDMA 5 */
-#define ATAConfiguration_UDMATiming_SecondaryDevice0CycleTime_2		0x0200	/* UDMA 2, UDMA 4 */
-#define ATAConfiguration_UDMATiming_SecondaryDevice0CycleTime_3		0x0300	/* X */
-#define ATAConfiguration_UDMATiming_SecondaryDevice1CycleTime		0x3000
-#define ATAConfiguration_UDMATiming_SecondaryDevice1CycleTime_0		0x0000	/* UDMA 0 */
-#define ATAConfiguration_UDMATiming_SecondaryDevice1CycleTime_1		0x1000	/* UDMA 1, UDMA 3, UDMA 5 */
-#define ATAConfiguration_UDMATiming_SecondaryDevice1CycleTime_2		0x2000	/* UDMA 2, UDMA 4 */
-#define ATAConfiguration_UDMATiming_SecondaryDevice1CycleTime_3		0x3000	/* X */
-
-#define ATAConfiguration_IDEIOConfiguration_PrimaryDevice066MhzEnable		0x00000001	/* UDMA 3, UDMA 4 */
-#define ATAConfiguration_IDEIOConfiguration_PrimaryDevice166MhzEnable		0x00000002
-#define ATAConfiguration_IDEIOConfiguration_SecondaryDevice066MhzEnable		0x00000004
-#define ATAConfiguration_IDEIOConfiguration_SecondaryDevice166MhzEnable		0x00000008
-#define ATAConfiguration_IDEIOConfiguration_DeviceCable80Report			0x000000F0
-#define ATAConfiguration_IDEIOConfiguration_PrimaryDeviceCable80Report		0x00000030
-#define ATAConfiguration_IDEIOConfiguration_PrimaryDevice0Cable80Report		0x00000010	/* UDMA 3, UDMA 4, UDMA 5 */
-#define ATAConfiguration_IDEIOConfiguration_PrimaryDevice1Cable80Report		0x00000020
-#define ATAConfiguration_IDEIOConfiguration_SecondaryDeviceCable80Report	0x000000C0
-#define ATAConfiguration_IDEIOConfiguration_SecondaryDevice0Cable80Report	0x00000040
-#define ATAConfiguration_IDEIOConfiguration_SecondaryDevice1Cable80Report	0x00000080
-#define ATAConfiguration_IDEIOConfiguration_PrimaryDevice0100MhzEnable		0x00001000	/* UDMA 5 */
-#define ATAConfiguration_IDEIOConfiguration_PrimaryDevice1100MhzEnable		0x00002000
-#define ATAConfiguration_IDEIOConfiguration_SecondaryDevice0100MhzEnable	0x00004000
-#define ATAConfiguration_IDEIOConfiguration_SecondaryDevice1100MhzEnable	0x00008000
-#define ATAConfiguration_IDEIOConfiguration_ATA100IsSupported			0x00F00000
-
-enum _PIOTimingMode {
-	PIO0 = 0,
-	PIO1,
-	PIO2,	/* MDMA 0 */
-	PIO3,	/* MDMA 1 */
-	PIO4	/* MDMA 2 */
-};
-
-enum _DMATimingMode {
-	MDMA0 = 0,
-	MDMA1,
-	MDMA2
-};
-
-enum _UDMATimingMode {
-	UDMA0 = 0,
-	UDMA1,
-	UDMA2,
-	UDMA3,
-	UDMA4,
-	UDMA5
-};
-
-
-enum rdc_controller_ids {
-	/* controller IDs */
-	RDC_17F31011,
-	RDC_17F31012
-};
-
-#endif