浏览代码

omap3: add support for NAND on LDP board

patch adds NAND support to LDP board.

Signed-off-by: Vimal Singh <vimalsingh@ti.com>
Signed-off-by: Sukumar Ghorai <s-ghorai@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Sukumar Ghorai 15 年之前
父节点
当前提交
2430f9df61
共有 2 个文件被更改,包括 36 次插入0 次删除
  1. 1 0
      arch/arm/mach-omap2/Makefile
  2. 35 0
      arch/arm/mach-omap2/board-ldp.c

+ 1 - 0
arch/arm/mach-omap2/Makefile

@@ -112,6 +112,7 @@ obj-$(CONFIG_MACH_OMAP3_BEAGLE)		+= board-omap3beagle.o \
 obj-$(CONFIG_MACH_DEVKIT8000)     	+= board-devkit8000.o \
                                            hsmmc.o
 obj-$(CONFIG_MACH_OMAP_LDP)		+= board-ldp.o \
+					   board-flash.o \
 					   hsmmc.o
 obj-$(CONFIG_MACH_OVERO)		+= board-overo.o \
 					   hsmmc.o

+ 35 - 0
arch/arm/mach-omap2/board-ldp.c

@@ -38,6 +38,7 @@
 #include <plat/board.h>
 #include <plat/common.h>
 #include <plat/gpmc.h>
+#include <mach/board-zoom.h>
 
 #include <asm/delay.h>
 #include <plat/control.h>
@@ -388,6 +389,38 @@ static struct omap_musb_board_data musb_board_data = {
 	.power			= 100,
 };
 
+static struct mtd_partition ldp_nand_partitions[] = {
+	/* All the partition sizes are listed in terms of NAND block size */
+	{
+		.name		= "X-Loader-NAND",
+		.offset		= 0,
+		.size		= 4 * (64 * 2048),	/* 512KB, 0x80000 */
+		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
+	},
+	{
+		.name		= "U-Boot-NAND",
+		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x80000 */
+		.size		= 10 * (64 * 2048),	/* 1.25MB, 0x140000 */
+		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
+	},
+	{
+		.name		= "Boot Env-NAND",
+		.offset		= MTDPART_OFS_APPEND,   /* Offset = 0x1c0000 */
+		.size		= 2 * (64 * 2048),	/* 256KB, 0x40000 */
+	},
+	{
+		.name		= "Kernel-NAND",
+		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x0200000*/
+		.size		= 240 * (64 * 2048),	/* 30M, 0x1E00000 */
+	},
+	{
+		.name		= "File System - NAND",
+		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x2000000 */
+		.size		= MTDPART_SIZ_FULL,	/* 96MB, 0x6000000 */
+	},
+
+};
+
 static void __init omap_ldp_init(void)
 {
 	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
@@ -400,6 +433,8 @@ static void __init omap_ldp_init(void)
 	ads7846_dev_init();
 	omap_serial_init();
 	usb_musb_init(&musb_board_data);
+	board_nand_init(ldp_nand_partitions,
+		ARRAY_SIZE(ldp_nand_partitions), ZOOM_NAND_CS);
 
 	omap2_hsmmc_init(mmc);
 	/* link regulators to MMC adapters */