Merge branch 'depends/rmk/for-linus' into next/soc

Conflicts:
	arch/arm/mach-tegra/board-dt-tegra20.c
	arch/arm/mach-tegra/common.c

Documentation/ABI/testing/sysfs-bus-rbd

@@ -57,13 +57,6 @@ create_snap
 
 	 $ echo <snap-name> > /sys/bus/rbd/devices/<dev-id>/snap_create
 
-rollback_snap
-
-	Rolls back data to the specified snapshot. This goes over the entire
-	list of rados blocks and sends a rollback command to each.
-
-	 $ echo <snap-name> > /sys/bus/rbd/devices/<dev-id>/snap_rollback
-
 snap_*
 
 	A directory per each snapshot

Documentation/virtual/kvm/api.txt

@@ -1100,6 +1100,15 @@ emulate them efficiently. The fields in each entry are defined as follows:
    eax, ebx, ecx, edx: the values returned by the cpuid instruction for
          this function/index combination
 
+The TSC deadline timer feature (CPUID leaf 1, ecx[24]) is always returned
+as false, since the feature depends on KVM_CREATE_IRQCHIP for local APIC
+support.  Instead it is reported via
+
+  ioctl(KVM_CHECK_EXTENSION, KVM_CAP_TSC_DEADLINE_TIMER)
+
+if that returns true and you use KVM_CREATE_IRQCHIP, or if you emulate the
+feature in userspace, then you can enable the feature for KVM_SET_CPUID2.
+
 4.47 KVM_PPC_GET_PVINFO
 
 Capability: KVM_CAP_PPC_GET_PVINFO
@@ -1151,6 +1160,13 @@ following flags are specified:
 /* Depends on KVM_CAP_IOMMU */
 #define KVM_DEV_ASSIGN_ENABLE_IOMMU	(1 << 0)
 
+The KVM_DEV_ASSIGN_ENABLE_IOMMU flag is a mandatory option to ensure
+isolation of the device.  Usages not specifying this flag are deprecated.
+
+Only PCI header type 0 devices with PCI BAR resources are supported by
+device assignment.  The user requesting this ioctl must have read/write
+access to the PCI sysfs resource files associated with the device.
+
 4.49 KVM_DEASSIGN_PCI_DEVICE
 
 Capability: KVM_CAP_DEVICE_DEASSIGNMENT

MAINTAINERS

@@ -1124,13 +1124,6 @@ S:	Supported
 F:	arch/arm/mach-shmobile/
 F:	drivers/sh/
 
-ARM/TELECHIPS ARM ARCHITECTURE
-M:	"Hans J. Koch" <hjk@hansjkoch.de>
-L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-S:	Maintained
-F:	arch/arm/plat-tcc/
-F:	arch/arm/mach-tcc8k/
-
 ARM/TECHNOLOGIC SYSTEMS TS7250 MACHINE SUPPORT
 M:	Lennert Buytenhek <kernel@wantstofly.org>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
@@ -2700,7 +2693,7 @@ FIREWIRE SUBSYSTEM
 M:	Stefan Richter <stefanr@s5r6.in-berlin.de>
 L:	linux1394-devel@lists.sourceforge.net
 W:	http://ieee1394.wiki.kernel.org/
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394.git
 S:	Maintained
 F:	drivers/firewire/
 F:	include/linux/firewire*.h
@@ -3101,6 +3094,7 @@ F:	include/linux/hid*
 
 HIGH-RESOLUTION TIMERS, CLOCKEVENTS, DYNTICKS
 M:	Thomas Gleixner <tglx@linutronix.de>
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git timers/core
 S:	Maintained
 F:	Documentation/timers/
 F:	kernel/hrtimer.c
@@ -3610,7 +3604,7 @@ F:	net/irda/
 IRQ SUBSYSTEM
 M:	Thomas Gleixner <tglx@linutronix.de>
 S:	Maintained
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip.git irq/core
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git irq/core
 F:	kernel/irq/
 
 ISAPNP
@@ -4098,7 +4092,7 @@ F:	drivers/hwmon/lm90.c
 LOCKDEP AND LOCKSTAT
 M:	Peter Zijlstra <peterz@infradead.org>
 M:	Ingo Molnar <mingo@redhat.com>
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/peterz/linux-2.6-lockdep.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git core/locking
 S:	Maintained
 F:	Documentation/lockdep*.txt
 F:	Documentation/lockstat.txt
@@ -4280,7 +4274,9 @@ T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
 S:	Maintained
 F:	Documentation/dvb/
 F:	Documentation/video4linux/
+F:	Documentation/DocBook/media/
 F:	drivers/media/
+F:	drivers/staging/media/
 F:	include/media/
 F:	include/linux/dvb/
 F:	include/linux/videodev*.h
@@ -5086,6 +5082,7 @@ M:	Peter Zijlstra <a.p.zijlstra@chello.nl>
 M:	Paul Mackerras <paulus@samba.org>
 M:	Ingo Molnar <mingo@elte.hu>
 M:	Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git perf/core
 S:	Supported
 F:	kernel/events/*
 F:	include/linux/perf_event.h
@@ -5165,6 +5162,7 @@ F:	drivers/scsi/pm8001/
 
 POSIX CLOCKS and TIMERS
 M:	Thomas Gleixner <tglx@linutronix.de>
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git timers/core
 S:	Supported
 F:	fs/timerfd.c
 F:	include/linux/timer*
@@ -5680,6 +5678,7 @@ F:	drivers/dma/dw_dmac.c
 TIMEKEEPING, NTP
 M:	John Stultz <johnstul@us.ibm.com>
 M:	Thomas Gleixner <tglx@linutronix.de>
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git timers/core
 S:	Supported
 F:	include/linux/clocksource.h
 F:	include/linux/time.h
@@ -5704,6 +5703,7 @@ F:	drivers/watchdog/sc1200wdt.c
 SCHEDULER
 M:	Ingo Molnar <mingo@elte.hu>
 M:	Peter Zijlstra <peterz@infradead.org>
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git sched/core
 S:	Maintained
 F:	kernel/sched*
 F:	include/linux/sched.h
@@ -6631,7 +6631,7 @@ TRACING
 M:	Steven Rostedt <rostedt@goodmis.org>
 M:	Frederic Weisbecker <fweisbec@gmail.com>
 M:	Ingo Molnar <mingo@redhat.com>
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip.git perf/core
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git perf/core
 S:	Maintained
 F:	Documentation/trace/ftrace.txt
 F:	arch/*/*/*/ftrace.h
@@ -7381,7 +7381,7 @@ M:	Thomas Gleixner <tglx@linutronix.de>
 M:	Ingo Molnar <mingo@redhat.com>
 M:	"H. Peter Anvin" <hpa@zytor.com>
 M:	x86@kernel.org
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git x86/core
 S:	Maintained
 F:	Documentation/x86/
 F:	arch/x86/

Makefile

@@ -1,7 +1,7 @@
 VERSION = 3
 PATCHLEVEL = 2
 SUBLEVEL = 0
-EXTRAVERSION = -rc5
+EXTRAVERSION = -rc7
 NAME = Saber-toothed Squirrel
 
 # *DOCUMENTATION*

arch/arm/Kconfig

@@ -220,8 +220,9 @@ config NEED_MACH_MEMORY_H
 	  be avoided when possible.
 
 config PHYS_OFFSET
-	hex "Physical address of main memory"
+	hex "Physical address of main memory" if MMU
 	depends on !ARM_PATCH_PHYS_VIRT && !NEED_MACH_MEMORY_H
+	default DRAM_BASE if !MMU
 	help
 	  Please provide the physical address corresponding to the
 	  location of main memory in your system.
@@ -257,6 +258,7 @@ config ARCH_INTEGRATOR
 	select ARCH_HAS_CPUFREQ
 	select CLKDEV_LOOKUP
 	select HAVE_MACH_CLKDEV
+	select HAVE_TCM
 	select ICST
 	select GENERIC_CLOCKEVENTS
 	select PLAT_VERSATILE
@@ -340,10 +342,12 @@ config ARCH_HIGHBANK
 	select ARM_AMBA
 	select ARM_GIC
 	select ARM_TIMER_SP804
+	select CACHE_L2X0
 	select CLKDEV_LOOKUP
 	select CPU_V7
 	select GENERIC_CLOCKEVENTS
 	select HAVE_ARM_SCU
+	select HAVE_SMP
 	select USE_OF
 	help
 	  Support for the Calxeda Highbank SoC based boards.
@@ -361,6 +365,7 @@ config ARCH_CNS3XXX
 	select CPU_V6K
 	select GENERIC_CLOCKEVENTS
 	select ARM_GIC
+	select MIGHT_HAVE_CACHE_L2X0
 	select MIGHT_HAVE_PCI
 	select PCI_DOMAINS if PCI
 	help
@@ -381,6 +386,7 @@ config ARCH_PRIMA2
 	select GENERIC_CLOCKEVENTS
 	select CLKDEV_LOOKUP
 	select GENERIC_IRQ_CHIP
+	select MIGHT_HAVE_CACHE_L2X0
 	select USE_OF
 	select ZONE_DMA
 	help
@@ -633,6 +639,8 @@ config ARCH_TEGRA
 	select GENERIC_GPIO
 	select HAVE_CLK
 	select HAVE_SCHED_CLOCK
+	select HAVE_SMP
+	select MIGHT_HAVE_CACHE_L2X0
 	select ARCH_HAS_CPUFREQ
 	help
 	  This enables support for NVIDIA Tegra based systems (Tegra APX,
@@ -702,7 +710,9 @@ config ARCH_SHMOBILE
 	select HAVE_CLK
 	select CLKDEV_LOOKUP
 	select HAVE_MACH_CLKDEV
+	select HAVE_SMP
 	select GENERIC_CLOCKEVENTS
+	select MIGHT_HAVE_CACHE_L2X0
 	select NO_IOPORT
 	select SPARSE_IRQ
 	select MULTI_IRQ_HANDLER
@@ -867,16 +877,6 @@ config ARCH_SHARK
 	  Support for the StrongARM based Digital DNARD machine, also known
 	  as "Shark" (<http://www.shark-linux.de/shark.html>).
 
-config ARCH_TCC_926
-	bool "Telechips TCC ARM926-based systems"
-	select CLKSRC_MMIO
-	select CPU_ARM926T
-	select HAVE_CLK
-	select CLKDEV_LOOKUP
-	select GENERIC_CLOCKEVENTS
-	help
-	  Support for Telechips TCC ARM926-based systems.
-
 config ARCH_U300
 	bool "ST-Ericsson U300 Series"
 	depends on MMU
@@ -904,6 +904,8 @@ config ARCH_U8500
 	select CLKDEV_LOOKUP
 	select ARCH_REQUIRE_GPIOLIB
 	select ARCH_HAS_CPUFREQ
+	select HAVE_SMP
+	select MIGHT_HAVE_CACHE_L2X0
 	help
 	  Support for ST-Ericsson's Ux500 architecture
 
@@ -914,6 +916,7 @@ config ARCH_NOMADIK
 	select CPU_ARM926T
 	select CLKDEV_LOOKUP
 	select GENERIC_CLOCKEVENTS
+	select MIGHT_HAVE_CACHE_L2X0
 	select ARCH_REQUIRE_GPIOLIB
 	help
 	  Support for the Nomadik platform by ST-Ericsson
@@ -973,6 +976,7 @@ config ARCH_ZYNQ
 	select ARM_GIC
 	select ARM_AMBA
 	select ICST
+	select MIGHT_HAVE_CACHE_L2X0
 	select USE_OF
 	help
 	  Support for Xilinx Zynq ARM Cortex A9 Platform
@@ -1059,8 +1063,6 @@ source "arch/arm/plat-s5p/Kconfig"
 
 source "arch/arm/plat-spear/Kconfig"
 
-source "arch/arm/plat-tcc/Kconfig"
-
 if ARCH_S3C2410
 source "arch/arm/mach-s3c2410/Kconfig"
 source "arch/arm/mach-s3c2412/Kconfig"
@@ -1125,6 +1127,11 @@ config ARM_TIMER_SP804
 
 source arch/arm/mm/Kconfig
 
+config ARM_NR_BANKS
+	int
+	default 16 if ARCH_EP93XX
+	default 8
+
 config IWMMXT
 	bool "Enable iWMMXt support"
 	depends on CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK || CPU_PJ4
@@ -1245,7 +1252,7 @@ config PL310_ERRATA_588369
 
 config ARM_ERRATA_720789
 	bool "ARM errata: TLBIASIDIS and TLBIMVAIS operations can broadcast a faulty ASID"
-	depends on CPU_V7 && SMP
+	depends on CPU_V7
 	help
 	  This option enables the workaround for the 720789 Cortex-A9 (prior to
 	  r2p0) erratum. A faulty ASID can be sent to the other CPUs for the
@@ -1281,7 +1288,7 @@ config ARM_ERRATA_743622
 
 config ARM_ERRATA_751472
 	bool "ARM errata: Interrupted ICIALLUIS may prevent completion of broadcasted operation"
-	depends on CPU_V7 && SMP
+	depends on CPU_V7
 	help
 	  This option enables the workaround for the 751472 Cortex-A9 (prior
 	  to r3p0) erratum. An interrupted ICIALLUIS operation may prevent the
@@ -1434,14 +1441,20 @@ menu "Kernel Features"
 
 source "kernel/time/Kconfig"
 
+config HAVE_SMP
+	bool
+	help
+	  This option should be selected by machines which have an SMP-
+	  capable CPU.
+
+	  The only effect of this option is to make the SMP-related
+	  options available to the user for configuration.
+
 config SMP
 	bool "Symmetric Multi-Processing"
 	depends on CPU_V6K || CPU_V7
 	depends on GENERIC_CLOCKEVENTS
-	depends on REALVIEW_EB_ARM11MP || REALVIEW_EB_A9MP || \
-		 MACH_REALVIEW_PB11MP || MACH_REALVIEW_PBX || ARCH_OMAP4 || \
-		 ARCH_EXYNOS4 || ARCH_TEGRA || ARCH_U8500 || ARCH_VEXPRESS_CA9X4 || \
-		 ARCH_MSM_SCORPIONMP || ARCH_SHMOBILE || ARCH_HIGHBANK || SOC_IMX6Q
+	depends on HAVE_SMP
 	depends on MMU
 	select USE_GENERIC_SMP_HELPERS
 	select HAVE_ARM_SCU if !ARCH_MSM_SCORPIONMP
@@ -1559,6 +1572,16 @@ config LOCAL_TIMERS
 	  accounting to be spread across the timer interval, preventing a
 	  "thundering herd" at every timer tick.
 
+config ARCH_NR_GPIO
+	int
+	default 1024 if ARCH_SHMOBILE || ARCH_TEGRA
+	default 350 if ARCH_U8500
+	default 0
+	help
+	  Maximum number of GPIOs in the system.
+
+	  If unsure, leave the default value.
+
 source kernel/Kconfig.preempt
 
 config HZ

arch/arm/Makefile

@@ -184,7 +184,6 @@ machine-$(CONFIG_ARCH_EXYNOS4)		:= exynos
 machine-$(CONFIG_ARCH_SA1100)		:= sa1100
 machine-$(CONFIG_ARCH_SHARK)		:= shark
 machine-$(CONFIG_ARCH_SHMOBILE) 	:= shmobile
-machine-$(CONFIG_ARCH_TCC8K)		:= tcc8k
 machine-$(CONFIG_ARCH_TEGRA)		:= tegra
 machine-$(CONFIG_ARCH_U300)		:= u300
 machine-$(CONFIG_ARCH_U8500)		:= ux500
@@ -204,7 +203,6 @@ machine-$(CONFIG_ARCH_ZYNQ)		:= zynq
 plat-$(CONFIG_ARCH_MXC)		:= mxc
 plat-$(CONFIG_ARCH_OMAP)	:= omap
 plat-$(CONFIG_ARCH_S3C64XX)	:= samsung
-plat-$(CONFIG_ARCH_TCC_926)	:= tcc
 plat-$(CONFIG_ARCH_ZYNQ)	:= versatile
 plat-$(CONFIG_PLAT_IOP)		:= iop
 plat-$(CONFIG_PLAT_NOMADIK)	:= nomadik

arch/arm/boot/compressed/Makefile

@@ -126,7 +126,8 @@ ccflags-y := -fpic -fno-builtin -I$(obj)
 asflags-y := -Wa,-march=all
 
 # Supply kernel BSS size to the decompressor via a linker symbol.
-KBSS_SZ = $(shell size $(obj)/../../../../vmlinux | awk 'END{print $$3}')
+KBSS_SZ = $(shell $(CROSS_COMPILE)size $(obj)/../../../../vmlinux | \
+		awk 'END{print $$3}')
 LDFLAGS_vmlinux = --defsym _kernel_bss_size=$(KBSS_SZ)
 # Supply ZRELADDR to the decompressor via a linker symbol.
 ifneq ($(CONFIG_AUTO_ZRELADDR),y)

arch/arm/common/pl330.c

@@ -221,17 +221,6 @@
  */
 #define MCODE_BUFF_PER_REQ	256
 
-/*
- * Mark a _pl330_req as free.
- * We do it by writing DMAEND as the first instruction
- * because no valid request is going to have DMAEND as
- * its first instruction to execute.
- */
-#define MARK_FREE(req)	do { \
-				_emit_END(0, (req)->mc_cpu); \
-				(req)->mc_len = 0; \
-			} while (0)
-
 /* If the _pl330_req is available to the client */
 #define IS_FREE(req)	(*((u8 *)((req)->mc_cpu)) == CMD_DMAEND)
 
@@ -301,8 +290,10 @@ struct pl330_thread {
 	struct pl330_dmac *dmac;
 	/* Only two at a time */
 	struct _pl330_req req[2];
-	/* Index of the last submitted request */
+	/* Index of the last enqueued request */
 	unsigned lstenq;
+	/* Index of the last submitted request or -1 if the DMA is stopped */
+	int req_running;
 };
 
 enum pl330_dmac_state {
@@ -778,6 +769,22 @@ static inline void _execute_DBGINSN(struct pl330_thread *thrd,
 	writel(0, regs + DBGCMD);
 }
 
+/*
+ * Mark a _pl330_req as free.
+ * We do it by writing DMAEND as the first instruction
+ * because no valid request is going to have DMAEND as
+ * its first instruction to execute.
+ */
+static void mark_free(struct pl330_thread *thrd, int idx)
+{
+	struct _pl330_req *req = &thrd->req[idx];
+
+	_emit_END(0, req->mc_cpu);
+	req->mc_len = 0;
+
+	thrd->req_running = -1;
+}
+
 static inline u32 _state(struct pl330_thread *thrd)
 {
 	void __iomem *regs = thrd->dmac->pinfo->base;
@@ -836,31 +843,6 @@ static inline u32 _state(struct pl330_thread *thrd)
 	}
 }
 
-/* If the request 'req' of thread 'thrd' is currently active */
-static inline bool _req_active(struct pl330_thread *thrd,
-		struct _pl330_req *req)
-{
-	void __iomem *regs = thrd->dmac->pinfo->base;
-	u32 buf = req->mc_bus, pc = readl(regs + CPC(thrd->id));
-
-	if (IS_FREE(req))
-		return false;
-
-	return (pc >= buf && pc <= buf + req->mc_len) ? true : false;
-}
-
-/* Returns 0 if the thread is inactive, ID of active req + 1 otherwise */
-static inline unsigned _thrd_active(struct pl330_thread *thrd)
-{
-	if (_req_active(thrd, &thrd->req[0]))
-		return 1; /* First req active */
-
-	if (_req_active(thrd, &thrd->req[1]))
-		return 2; /* Second req active */
-
-	return 0;
-}
-
 static void _stop(struct pl330_thread *thrd)
 {
 	void __iomem *regs = thrd->dmac->pinfo->base;
@@ -892,17 +874,22 @@ static bool _trigger(struct pl330_thread *thrd)
 	struct _arg_GO go;
 	unsigned ns;
 	u8 insn[6] = {0, 0, 0, 0, 0, 0};
+	int idx;
 
 	/* Return if already ACTIVE */
 	if (_state(thrd) != PL330_STATE_STOPPED)
 		return true;
 
-	if (!IS_FREE(&thrd->req[1 - thrd->lstenq]))
-		req = &thrd->req[1 - thrd->lstenq];
-	else if (!IS_FREE(&thrd->req[thrd->lstenq]))
-		req = &thrd->req[thrd->lstenq];
-	else
-		req = NULL;
+	idx = 1 - thrd->lstenq;
+	if (!IS_FREE(&thrd->req[idx]))
+		req = &thrd->req[idx];
+	else {
+		idx = thrd->lstenq;
+		if (!IS_FREE(&thrd->req[idx]))
+			req = &thrd->req[idx];
+		else
+			req = NULL;
+	}
 
 	/* Return if no request */
 	if (!req || !req->r)
@@ -933,6 +920,8 @@ static bool _trigger(struct pl330_thread *thrd)
 	/* Only manager can execute GO */
 	_execute_DBGINSN(thrd, insn, true);
 
+	thrd->req_running = idx;
+
 	return true;
 }
 
@@ -1382,8 +1371,8 @@ static void pl330_dotask(unsigned long data)
 
 			thrd->req[0].r = NULL;
 			thrd->req[1].r = NULL;
-			MARK_FREE(&thrd->req[0]);
-			MARK_FREE(&thrd->req[1]);
+			mark_free(thrd, 0);
+			mark_free(thrd, 1);
 
 			/* Clear the reset flag */
 			pl330->dmac_tbd.reset_chan &= ~(1 << i);
@@ -1461,14 +1450,12 @@ int pl330_update(const struct pl330_info *pi)
 
 			thrd = &pl330->channels[id];
 
-			active = _thrd_active(thrd);
-			if (!active) /* Aborted */
+			active = thrd->req_running;
+			if (active == -1) /* Aborted */
 				continue;
 
-			active -= 1;
-
 			rqdone = &thrd->req[active];
-			MARK_FREE(rqdone);
+			mark_free(thrd, active);
 
 			/* Get going again ASAP */
 			_start(thrd);
@@ -1480,13 +1467,19 @@ int pl330_update(const struct pl330_info *pi)
 
 	/* Now that we are in no hurry, do the callbacks */
 	while (!list_empty(&pl330->req_done)) {
+		struct pl330_req *r;
+
 		rqdone = container_of(pl330->req_done.next,
 					struct _pl330_req, rqd);
 
 		list_del_init(&rqdone->rqd);
 
+		/* Detach the req */
+		r = rqdone->r;
+		rqdone->r = NULL;
+
 		spin_unlock_irqrestore(&pl330->lock, flags);
-		_callback(rqdone->r, PL330_ERR_NONE);
+		_callback(r, PL330_ERR_NONE);
 		spin_lock_irqsave(&pl330->lock, flags);
 	}
 
@@ -1509,7 +1502,7 @@ int pl330_chan_ctrl(void *ch_id, enum pl330_chan_op op)
 	struct pl330_thread *thrd = ch_id;
 	struct pl330_dmac *pl330;
 	unsigned long flags;
-	int ret = 0, active;
+	int ret = 0, active = thrd->req_running;
 
 	if (!thrd || thrd->free || thrd->dmac->state == DYING)
 		return -EINVAL;
@@ -1525,28 +1518,24 @@ int pl330_chan_ctrl(void *ch_id, enum pl330_chan_op op)
 
 		thrd->req[0].r = NULL;
 		thrd->req[1].r = NULL;
-		MARK_FREE(&thrd->req[0]);
-		MARK_FREE(&thrd->req[1]);
+		mark_free(thrd, 0);
+		mark_free(thrd, 1);
 		break;
 
 	case PL330_OP_ABORT:
-		active = _thrd_active(thrd);
-
 		/* Make sure the channel is stopped */
 		_stop(thrd);
 
 		/* ABORT is only for the active req */
-		if (!active)
+		if (active == -1)
 			break;
 
-		active--;
-
 		thrd->req[active].r = NULL;
-		MARK_FREE(&thrd->req[active]);
+		mark_free(thrd, active);
 
 		/* Start the next */
 	case PL330_OP_START:
-		if (!_thrd_active(thrd) && !_start(thrd))
+		if ((active == -1) && !_start(thrd))
 			ret = -EIO;
 		break;
 
@@ -1587,14 +1576,13 @@ int pl330_chan_status(void *ch_id, struct pl330_chanstatus *pstatus)
 	else
 		pstatus->faulting = false;
 
-	active = _thrd_active(thrd);
+	active = thrd->req_running;
 
-	if (!active) {
+	if (active == -1) {
 		/* Indicate that the thread is not running */
 		pstatus->top_req = NULL;
 		pstatus->wait_req = NULL;
 	} else {
-		active--;
 		pstatus->top_req = thrd->req[active].r;
 		pstatus->wait_req = !IS_FREE(&thrd->req[1 - active])
 					? thrd->req[1 - active].r : NULL;
@@ -1659,9 +1647,9 @@ void *pl330_request_channel(const struct pl330_info *pi)
 				thrd->free = false;
 				thrd->lstenq = 1;
 				thrd->req[0].r = NULL;
-				MARK_FREE(&thrd->req[0]);
+				mark_free(thrd, 0);
 				thrd->req[1].r = NULL;
-				MARK_FREE(&thrd->req[1]);
+				mark_free(thrd, 1);
 				break;
 			}
 		}
@@ -1767,14 +1755,14 @@ static inline void _reset_thread(struct pl330_thread *thrd)
 	thrd->req[0].mc_bus = pl330->mcode_bus
 				+ (thrd->id * pi->mcbufsz);
 	thrd->req[0].r = NULL;
-	MARK_FREE(&thrd->req[0]);
+	mark_free(thrd, 0);
 
 	thrd->req[1].mc_cpu = thrd->req[0].mc_cpu
 				+ pi->mcbufsz / 2;
 	thrd->req[1].mc_bus = thrd->req[0].mc_bus
 				+ pi->mcbufsz / 2;
 	thrd->req[1].r = NULL;
-	MARK_FREE(&thrd->req[1]);
+	mark_free(thrd, 1);
 }
 
 static int dmac_alloc_threads(struct pl330_dmac *pl330)

arch/arm/common/timer-sp.c

@@ -143,7 +143,6 @@ static int sp804_set_next_event(unsigned long next,
 }
 
 static struct clock_event_device sp804_clockevent = {
-	.shift		= 32,
 	.features       = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
 	.set_mode	= sp804_set_mode,
 	.set_next_event	= sp804_set_next_event,
@@ -169,13 +168,9 @@ void __init sp804_clockevents_init(void __iomem *base, unsigned int irq,
 
 	clkevt_base = base;
 	clkevt_reload = DIV_ROUND_CLOSEST(rate, HZ);
-
 	evt->name = name;
 	evt->irq = irq;
-	evt->mult = div_sc(rate, NSEC_PER_SEC, evt->shift);
-	evt->max_delta_ns = clockevent_delta2ns(0xffffffff, evt);
-	evt->min_delta_ns = clockevent_delta2ns(0xf, evt);
 
 	setup_irq(irq, &sp804_timer_irq);
-	clockevents_register_device(evt);
+	clockevents_config_and_register(evt, rate, 0xf, 0xffffffff);
 }

arch/arm/common/vic.c

@@ -197,8 +197,8 @@ static void __init vic_register(void __iomem *base, unsigned int irq,
 	v->domain.nr_irq = 32;
 #ifdef CONFIG_OF_IRQ
 	v->domain.of_node = of_node_get(node);
-	v->domain.ops = &irq_domain_simple_ops;
 #endif /* CONFIG_OF */
+	v->domain.ops = &irq_domain_simple_ops;
 	irq_domain_add(&v->domain);
 }
 

arch/arm/configs/imx_v4_v5_defconfig

@@ -18,9 +18,10 @@ CONFIG_ARCH_MXC=y
 CONFIG_ARCH_IMX_V4_V5=y
 CONFIG_ARCH_MX1ADS=y
 CONFIG_MACH_SCB9328=y
+CONFIG_MACH_APF9328=y
 CONFIG_MACH_MX21ADS=y
 CONFIG_MACH_MX25_3DS=y
-CONFIG_MACH_EUKREA_CPUIMX25=y
+CONFIG_MACH_EUKREA_CPUIMX25SD=y
 CONFIG_MACH_MX27ADS=y
 CONFIG_MACH_PCM038=y
 CONFIG_MACH_CPUIMX27=y
@@ -72,17 +73,16 @@ CONFIG_MTD_CFI_GEOMETRY=y
 CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_PHYSMAP=y
 CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_MXC=y
 CONFIG_MTD_UBI=y
 CONFIG_MISC_DEVICES=y
 CONFIG_EEPROM_AT24=y
 CONFIG_EEPROM_AT25=y
 CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMC91X=y
 CONFIG_DM9000=y
+CONFIG_SMC91X=y
 CONFIG_SMC911X=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
+CONFIG_SMSC_PHY=y
 # CONFIG_INPUT_MOUSEDEV is not set
 CONFIG_INPUT_EVDEV=y
 # CONFIG_INPUT_KEYBOARD is not set
@@ -100,6 +100,7 @@ CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_IMX=y
 CONFIG_SPI=y
 CONFIG_SPI_IMX=y
+CONFIG_SPI_SPIDEV=y
 CONFIG_W1=y
 CONFIG_W1_MASTER_MXC=y
 CONFIG_W1_SLAVE_THERM=y
@@ -139,6 +140,7 @@ CONFIG_MMC=y
 CONFIG_MMC_MXC=y
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
 CONFIG_LEDS_MC13783=y
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=y

arch/arm/include/asm/bug.h

@@ -32,7 +32,6 @@
 
 #define __BUG(__file, __line, __value)				\
 do {								\
-	BUILD_BUG_ON(sizeof(struct bug_entry) != 12);		\
 	asm volatile("1:\t" BUG_INSTR_TYPE #__value "\n"	\
 		".pushsection .rodata.str, \"aMS\", %progbits, 1\n" \
 		"2:\t.asciz " #__file "\n" 			\

arch/arm/include/asm/edac.h

@@ -0,0 +1,48 @@
+/*
+ * Copyright 2011 Calxeda, Inc.
+ * Based on PPC version Copyright 2007 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef ASM_EDAC_H
+#define ASM_EDAC_H
+/*
+ * ECC atomic, DMA, SMP and interrupt safe scrub function.
+ * Implements the per arch atomic_scrub() that EDAC use for software
+ * ECC scrubbing.  It reads memory and then writes back the original
+ * value, allowing the hardware to detect and correct memory errors.
+ */
+static inline void atomic_scrub(void *va, u32 size)
+{
+#if __LINUX_ARM_ARCH__ >= 6
+	unsigned int *virt_addr = va;
+	unsigned int temp, temp2;
+	unsigned int i;
+
+	for (i = 0; i < size / sizeof(*virt_addr); i++, virt_addr++) {
+		/* Very carefully read and write to memory atomically
+		 * so we are interrupt, DMA and SMP safe.
+		 */
+		__asm__ __volatile__("\n"
+			"1:	ldrex	%0, [%2]\n"
+			"	strex	%1, %0, [%2]\n"
+			"	teq	%1, #0\n"
+			"	bne	1b\n"
+			: "=&r"(temp), "=&r"(temp2)
+			: "r"(virt_addr)
+			: "cc");
+	}
+#endif
+}
+
+#endif

arch/arm/include/asm/gpio.h

@@ -1,6 +1,10 @@
 #ifndef _ARCH_ARM_GPIO_H
 #define _ARCH_ARM_GPIO_H
 
+#if CONFIG_ARCH_NR_GPIO > 0
+#define ARCH_NR_GPIO CONFIG_ARCH_NR_GPIO
+#endif
+
 /* not all ARM platforms necessarily support this API ... */
 #include <mach/gpio.h>
 

arch/arm/include/asm/hardirq.h

@@ -27,23 +27,6 @@ u64 smp_irq_stat_cpu(unsigned int cpu);
 
 #define arch_irq_stat_cpu	smp_irq_stat_cpu
 
-#if NR_IRQS > 512
-#define HARDIRQ_BITS	10
-#elif NR_IRQS > 256
-#define HARDIRQ_BITS	9
-#else
-#define HARDIRQ_BITS	8
-#endif
-
-/*
- * The hardirq mask has to be large enough to have space
- * for potentially all IRQ sources in the system nesting
- * on a single CPU:
- */
-#if (1 << HARDIRQ_BITS) < NR_IRQS
-# error HARDIRQ_BITS is too low!
-#endif
-
 #define __ARCH_IRQ_EXIT_IRQS_DISABLED	1
 
 #endif /* __ASM_HARDIRQ_H */

arch/arm/include/asm/hardware/iop3xx.h

@@ -234,6 +234,7 @@ extern int iop3xx_get_init_atu(void);
 void iop3xx_map_io(void);
 void iop_init_cp6_handler(void);
 void iop_init_time(unsigned long tickrate);
+void iop3xx_restart(char, const char *);
 
 static inline u32 read_tmr0(void)
 {

arch/arm/include/asm/opcodes.h

@@ -0,0 +1,20 @@
+/*
+ *  arch/arm/include/asm/opcodes.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARM_OPCODES_H
+#define __ASM_ARM_OPCODES_H
+
+#ifndef __ASSEMBLY__
+extern asmlinkage unsigned int arm_check_condition(u32 opcode, u32 psr);
+#endif
+
+#define ARM_OPCODE_CONDTEST_FAIL   0
+#define ARM_OPCODE_CONDTEST_PASS   1
+#define ARM_OPCODE_CONDTEST_UNCOND 2
+
+#endif /* __ASM_ARM_OPCODES_H */

arch/arm/include/asm/pgtable.h

@@ -42,13 +42,6 @@
 #define VMALLOC_START		(((unsigned long)high_memory + VMALLOC_OFFSET) & ~(VMALLOC_OFFSET-1))
 #define VMALLOC_END		0xff000000UL
 
-/* This is a temporary hack until shmobile's DMA area size is sorted out */
-#ifdef CONFIG_ARCH_SHMOBILE
-#warning "SH-Mobile's consistent DMA size conflicts with VMALLOC_END by 144MB"
-#undef VMALLOC_END
-#define VMALLOC_END		0xF6000000UL
-#endif
-
 #define LIBRARY_TEXT_START	0x0c000000
 
 #ifndef __ASSEMBLY__
@@ -306,6 +299,7 @@ static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
  * We provide our own arch_get_unmapped_area to cope with VIPT caches.
  */
 #define HAVE_ARCH_UNMAPPED_AREA
+#define HAVE_ARCH_UNMAPPED_AREA_TOPDOWN
 
 /*
  * remap a physical page `pfn' of size `size' with page protection `prot'

arch/arm/include/asm/processor.h

@@ -123,6 +123,8 @@ static inline void prefetch(const void *ptr)
 
 #endif
 
+#define HAVE_ARCH_PICK_MMAP_LAYOUT
+
 #endif
 
 #endif /* __ASM_ARM_PROCESSOR_H */

arch/arm/include/asm/sched_clock.h

@@ -8,113 +8,7 @@
 #ifndef ASM_SCHED_CLOCK
 #define ASM_SCHED_CLOCK
 
-#include <linux/kernel.h>
-#include <linux/types.h>
-
-struct clock_data {
-	u64 epoch_ns;
-	u32 epoch_cyc;
-	u32 epoch_cyc_copy;
-	u32 mult;
-	u32 shift;
-};
-
-#define DEFINE_CLOCK_DATA(name)	struct clock_data name
-
-static inline u64 cyc_to_ns(u64 cyc, u32 mult, u32 shift)
-{
-	return (cyc * mult) >> shift;
-}
-
-/*
- * Atomically update the sched_clock epoch.  Your update callback will
- * be called from a timer before the counter wraps - read the current
- * counter value, and call this function to safely move the epochs
- * forward.  Only use this from the update callback.
- */
-static inline void update_sched_clock(struct clock_data *cd, u32 cyc, u32 mask)
-{
-	unsigned long flags;
-	u64 ns = cd->epoch_ns +
-		cyc_to_ns((cyc - cd->epoch_cyc) & mask, cd->mult, cd->shift);
-
-	/*
-	 * Write epoch_cyc and epoch_ns in a way that the update is
-	 * detectable in cyc_to_fixed_sched_clock().
-	 */
-	raw_local_irq_save(flags);
-	cd->epoch_cyc = cyc;
-	smp_wmb();
-	cd->epoch_ns = ns;
-	smp_wmb();
-	cd->epoch_cyc_copy = cyc;
-	raw_local_irq_restore(flags);
-}
-
-/*
- * If your clock rate is known at compile time, using this will allow
- * you to optimize the mult/shift loads away.  This is paired with
- * init_fixed_sched_clock() to ensure that your mult/shift are correct.
- */
-static inline unsigned long long cyc_to_fixed_sched_clock(struct clock_data *cd,
-	u32 cyc, u32 mask, u32 mult, u32 shift)
-{
-	u64 epoch_ns;
-	u32 epoch_cyc;
-
-	/*
-	 * Load the epoch_cyc and epoch_ns atomically.  We do this by
-	 * ensuring that we always write epoch_cyc, epoch_ns and
-	 * epoch_cyc_copy in strict order, and read them in strict order.
-	 * If epoch_cyc and epoch_cyc_copy are not equal, then we're in
-	 * the middle of an update, and we should repeat the load.
-	 */
-	do {
-		epoch_cyc = cd->epoch_cyc;
-		smp_rmb();
-		epoch_ns = cd->epoch_ns;
-		smp_rmb();
-	} while (epoch_cyc != cd->epoch_cyc_copy);
-
-	return epoch_ns + cyc_to_ns((cyc - epoch_cyc) & mask, mult, shift);
-}
-
-/*
- * Otherwise, you need to use this, which will obtain the mult/shift
- * from the clock_data structure.  Use init_sched_clock() with this.
- */
-static inline unsigned long long cyc_to_sched_clock(struct clock_data *cd,
-	u32 cyc, u32 mask)
-{
-	return cyc_to_fixed_sched_clock(cd, cyc, mask, cd->mult, cd->shift);
-}
-
-/*
- * Initialize the clock data - calculate the appropriate multiplier
- * and shift.  Also setup a timer to ensure that the epoch is refreshed
- * at the appropriate time interval, which will call your update
- * handler.
- */
-void init_sched_clock(struct clock_data *, void (*)(void),
-	unsigned int, unsigned long);
-
-/*
- * Use this initialization function rather than init_sched_clock() if
- * you're using cyc_to_fixed_sched_clock, which will warn if your
- * constants are incorrect.
- */
-static inline void init_fixed_sched_clock(struct clock_data *cd,
-	void (*update)(void), unsigned int bits, unsigned long rate,
-	u32 mult, u32 shift)
-{
-	init_sched_clock(cd, update, bits, rate);
-	if (cd->mult != mult || cd->shift != shift) {
-		pr_crit("sched_clock: wrong multiply/shift: %u>>%u vs calculated %u>>%u\n"
-			"sched_clock: fix multiply/shift to avoid scheduler hiccups\n",
-			mult, shift, cd->mult, cd->shift);
-	}
-}
-
 extern void sched_clock_postinit(void);
+extern void setup_sched_clock(u32 (*read)(void), int bits, unsigned long rate);
 
 #endif

arch/arm/include/asm/setup.h

@@ -192,11 +192,7 @@ static const struct tagtable __tagtable_##fn __tag = { tag, fn }
 /*
  * Memory map description
  */
-#ifdef CONFIG_ARCH_EP93XX
-# define NR_BANKS 16
-#else
-# define NR_BANKS 8
-#endif
+#define NR_BANKS	CONFIG_ARM_NR_BANKS
 
 struct membank {
 	phys_addr_t start;

arch/arm/include/asm/swab.h

@@ -24,12 +24,13 @@
 
 #if defined(__KERNEL__) && __LINUX_ARM_ARCH__ >= 6
 
-static inline __attribute_const__ __u16 __arch_swab16(__u16 x)
+static inline __attribute_const__ __u32 __arch_swahb32(__u32 x)
 {
 	__asm__ ("rev16 %0, %1" : "=r" (x) : "r" (x));
 	return x;
 }
-#define __arch_swab16 __arch_swab16
+#define __arch_swahb32 __arch_swahb32
+#define __arch_swab16(x) ((__u16)__arch_swahb32(x))
 
 static inline __attribute_const__ __u32 __arch_swab32(__u32 x)
 {

arch/arm/include/asm/system.h

@@ -108,7 +108,6 @@ extern void __show_regs(struct pt_regs *);
 extern int __pure cpu_architecture(void);
 extern void cpu_init(void);
 
-void arm_machine_restart(char mode, const char *cmd);
 void soft_restart(unsigned long);
 extern void (*arm_pm_restart)(char str, const char *cmd);
 

arch/arm/include/asm/unwind.h

@@ -30,14 +30,15 @@ enum unwind_reason_code {
 };
 
 struct unwind_idx {
-	unsigned long addr;
+	unsigned long addr_offset;
 	unsigned long insn;
 };
 
 struct unwind_table {
 	struct list_head list;
-	struct unwind_idx *start;
-	struct unwind_idx *stop;
+	const struct unwind_idx *start;
+	const struct unwind_idx *origin;
+	const struct unwind_idx *stop;
 	unsigned long begin_addr;
 	unsigned long end_addr;
 };
@@ -49,15 +50,6 @@ extern struct unwind_table *unwind_table_add(unsigned long start,
 extern void unwind_table_del(struct unwind_table *tab);
 extern void unwind_backtrace(struct pt_regs *regs, struct task_struct *tsk);
 
-#ifdef CONFIG_ARM_UNWIND
-extern int __init unwind_init(void);
-#else
-static inline int __init unwind_init(void)
-{
-	return 0;
-}
-#endif
-
 #endif	/* !__ASSEMBLY__ */
 
 #ifdef CONFIG_ARM_UNWIND

arch/arm/kernel/Makefile

@@ -13,7 +13,7 @@ CFLAGS_REMOVE_return_address.o = -pg
 
 # Object file lists.
 
-obj-y		:= elf.o entry-armv.o entry-common.o irq.o \
+obj-y		:= elf.o entry-armv.o entry-common.o irq.o opcodes.o \
 		   process.o ptrace.o return_address.o setup.o signal.o \
 		   sys_arm.o stacktrace.o time.o traps.o
 

arch/arm/kernel/kprobes-test.c

@@ -202,6 +202,8 @@
 #include <linux/slab.h>
 #include <linux/kprobes.h>
 
+#include <asm/opcodes.h>
+
 #include "kprobes.h"
 #include "kprobes-test.h"
 
@@ -1050,65 +1052,9 @@ static int test_instance;
 
 static unsigned long test_check_cc(int cc, unsigned long cpsr)
 {
-	unsigned long temp;
-
-	switch (cc) {
-	case 0x0: /* eq */
-		return cpsr & PSR_Z_BIT;
-
-	case 0x1: /* ne */
-		return (~cpsr) & PSR_Z_BIT;
-
-	case 0x2: /* cs */
-		return cpsr & PSR_C_BIT;
-
-	case 0x3: /* cc */
-		return (~cpsr) & PSR_C_BIT;
-
-	case 0x4: /* mi */
-		return cpsr & PSR_N_BIT;
-
-	case 0x5: /* pl */
-		return (~cpsr) & PSR_N_BIT;
-
-	case 0x6: /* vs */
-		return cpsr & PSR_V_BIT;
-
-	case 0x7: /* vc */
-		return (~cpsr) & PSR_V_BIT;
+	int ret = arm_check_condition(cc << 28, cpsr);
 
-	case 0x8: /* hi */
-		cpsr &= ~(cpsr >> 1); /* PSR_C_BIT &= ~PSR_Z_BIT */
-		return cpsr & PSR_C_BIT;
-
-	case 0x9: /* ls */
-		cpsr &= ~(cpsr >> 1); /* PSR_C_BIT &= ~PSR_Z_BIT */
-		return (~cpsr) & PSR_C_BIT;
-
-	case 0xa: /* ge */
-		cpsr ^= (cpsr << 3); /* PSR_N_BIT ^= PSR_V_BIT */
-		return (~cpsr) & PSR_N_BIT;
-
-	case 0xb: /* lt */
-		cpsr ^= (cpsr << 3); /* PSR_N_BIT ^= PSR_V_BIT */
-		return cpsr & PSR_N_BIT;
-
-	case 0xc: /* gt */
-		temp = cpsr ^ (cpsr << 3); /* PSR_N_BIT ^= PSR_V_BIT */
-		temp |= (cpsr << 1);	   /* PSR_N_BIT |= PSR_Z_BIT */
-		return (~temp) & PSR_N_BIT;
-
-	case 0xd: /* le */
-		temp = cpsr ^ (cpsr << 3); /* PSR_N_BIT ^= PSR_V_BIT */
-		temp |= (cpsr << 1);	   /* PSR_N_BIT |= PSR_Z_BIT */
-		return temp & PSR_N_BIT;
-
-	case 0xe: /* al */
-	case 0xf: /* unconditional */
-		return true;
-	}
-	BUG();
-	return false;
+	return (ret != ARM_OPCODE_CONDTEST_FAIL);
 }
 
 static int is_last_scenario;
@@ -1128,7 +1074,9 @@ static unsigned long test_context_cpsr(int scenario)
 
 	if (!test_case_is_thumb) {
 		/* Testing ARM code */
-		probe_should_run = test_check_cc(current_instruction >> 28, cpsr) != 0;
+		int cc = current_instruction >> 28;
+
+		probe_should_run = test_check_cc(cc, cpsr) != 0;
 		if (scenario == 15)
 			is_last_scenario = true;
 

arch/arm/kernel/opcodes.c

@@ -0,0 +1,72 @@
+/*
+ *  linux/arch/arm/kernel/opcodes.c
+ *
+ *  A32 condition code lookup feature moved from nwfpe/fpopcode.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <asm/opcodes.h>
+
+#define ARM_OPCODE_CONDITION_UNCOND 0xf
+
+/*
+ * condition code lookup table
+ * index into the table is test code: EQ, NE, ... LT, GT, AL, NV
+ *
+ * bit position in short is condition code: NZCV
+ */
+static const unsigned short cc_map[16] = {
+	0xF0F0,			/* EQ == Z set            */
+	0x0F0F,			/* NE                     */
+	0xCCCC,			/* CS == C set            */
+	0x3333,			/* CC                     */
+	0xFF00,			/* MI == N set            */
+	0x00FF,			/* PL                     */
+	0xAAAA,			/* VS == V set            */
+	0x5555,			/* VC                     */
+	0x0C0C,			/* HI == C set && Z clear */
+	0xF3F3,			/* LS == C clear || Z set */
+	0xAA55,			/* GE == (N==V)           */
+	0x55AA,			/* LT == (N!=V)           */
+	0x0A05,			/* GT == (!Z && (N==V))   */
+	0xF5FA,			/* LE == (Z || (N!=V))    */
+	0xFFFF,			/* AL always              */
+	0			/* NV                     */
+};
+
+/*
+ * Returns:
+ * ARM_OPCODE_CONDTEST_FAIL   - if condition fails
+ * ARM_OPCODE_CONDTEST_PASS   - if condition passes (including AL)
+ * ARM_OPCODE_CONDTEST_UNCOND - if NV condition, or separate unconditional
+ *                              opcode space from v5 onwards
+ *
+ * Code that tests whether a conditional instruction would pass its condition
+ * check should check that return value == ARM_OPCODE_CONDTEST_PASS.
+ *
+ * Code that tests if a condition means that the instruction would be executed
+ * (regardless of conditional or unconditional) should instead check that the
+ * return value != ARM_OPCODE_CONDTEST_FAIL.
+ */
+asmlinkage unsigned int arm_check_condition(u32 opcode, u32 psr)
+{
+	u32 cc_bits  = opcode >> 28;
+	u32 psr_cond = psr >> 28;
+	unsigned int ret;
+
+	if (cc_bits != ARM_OPCODE_CONDITION_UNCOND) {
+		if ((cc_map[cc_bits] >> (psr_cond)) & 1)
+			ret = ARM_OPCODE_CONDTEST_PASS;
+		else
+			ret = ARM_OPCODE_CONDTEST_FAIL;
+	} else {
+		ret = ARM_OPCODE_CONDTEST_UNCOND;
+	}
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(arm_check_condition);

arch/arm/kernel/perf_event.c

@@ -639,6 +639,9 @@ static struct platform_device_id armpmu_plat_device_ids[] = {
 
 static int __devinit armpmu_device_probe(struct platform_device *pdev)
 {
+	if (!cpu_pmu)
+		return -ENODEV;
+
 	cpu_pmu->plat_device = pdev;
 	return 0;
 }

arch/arm/kernel/process.c

@@ -147,14 +147,8 @@ void soft_restart(unsigned long addr)
 	BUG();
 }
 
-void arm_machine_restart(char mode, const char *cmd)
+static void null_restart(char mode, const char *cmd)
 {
-	/* Disable interrupts first */
-	local_irq_disable();
-	local_fiq_disable();
-
-	/* Call the architecture specific reboot code. */
-	arch_reset(mode, cmd);
 }
 
 /*
@@ -163,7 +157,7 @@ void arm_machine_restart(char mode, const char *cmd)
 void (*pm_power_off)(void);
 EXPORT_SYMBOL(pm_power_off);
 
-void (*arm_pm_restart)(char str, const char *cmd) = arm_machine_restart;
+void (*arm_pm_restart)(char str, const char *cmd) = null_restart;
 EXPORT_SYMBOL_GPL(arm_pm_restart);
 
 static void do_nothing(void *unused)

arch/arm/kernel/sched_clock.c

@@ -14,61 +14,153 @@
 
 #include <asm/sched_clock.h>
 
+struct clock_data {
+	u64 epoch_ns;
+	u32 epoch_cyc;
+	u32 epoch_cyc_copy;
+	u32 mult;
+	u32 shift;
+};
+
 static void sched_clock_poll(unsigned long wrap_ticks);
 static DEFINE_TIMER(sched_clock_timer, sched_clock_poll, 0, 0);
-static void (*sched_clock_update_fn)(void);
+
+static struct clock_data cd = {
+	.mult	= NSEC_PER_SEC / HZ,
+};
+
+static u32 __read_mostly sched_clock_mask = 0xffffffff;
+
+static u32 notrace jiffy_sched_clock_read(void)
+{
+	return (u32)(jiffies - INITIAL_JIFFIES);
+}
+
+static u32 __read_mostly (*read_sched_clock)(void) = jiffy_sched_clock_read;
+
+static inline u64 cyc_to_ns(u64 cyc, u32 mult, u32 shift)
+{
+	return (cyc * mult) >> shift;
+}
+
+static unsigned long long cyc_to_sched_clock(u32 cyc, u32 mask)
+{
+	u64 epoch_ns;
+	u32 epoch_cyc;
+
+	/*
+	 * Load the epoch_cyc and epoch_ns atomically.  We do this by
+	 * ensuring that we always write epoch_cyc, epoch_ns and
+	 * epoch_cyc_copy in strict order, and read them in strict order.
+	 * If epoch_cyc and epoch_cyc_copy are not equal, then we're in
+	 * the middle of an update, and we should repeat the load.
+	 */
+	do {
+		epoch_cyc = cd.epoch_cyc;
+		smp_rmb();
+		epoch_ns = cd.epoch_ns;
+		smp_rmb();
+	} while (epoch_cyc != cd.epoch_cyc_copy);
+
+	return epoch_ns + cyc_to_ns((cyc - epoch_cyc) & mask, cd.mult, cd.shift);
+}
+
+/*
+ * Atomically update the sched_clock epoch.
+ */
+static void notrace update_sched_clock(void)
+{
+	unsigned long flags;
+	u32 cyc;
+	u64 ns;
+
+	cyc = read_sched_clock();
+	ns = cd.epoch_ns +
+		cyc_to_ns((cyc - cd.epoch_cyc) & sched_clock_mask,
+			  cd.mult, cd.shift);
+	/*
+	 * Write epoch_cyc and epoch_ns in a way that the update is
+	 * detectable in cyc_to_fixed_sched_clock().
+	 */
+	raw_local_irq_save(flags);
+	cd.epoch_cyc = cyc;
+	smp_wmb();
+	cd.epoch_ns = ns;
+	smp_wmb();
+	cd.epoch_cyc_copy = cyc;
+	raw_local_irq_restore(flags);
+}
 
 static void sched_clock_poll(unsigned long wrap_ticks)
 {
 	mod_timer(&sched_clock_timer, round_jiffies(jiffies + wrap_ticks));
-	sched_clock_update_fn();
+	update_sched_clock();
 }
 
-void __init init_sched_clock(struct clock_data *cd, void (*update)(void),
-	unsigned int clock_bits, unsigned long rate)
+void __init setup_sched_clock(u32 (*read)(void), int bits, unsigned long rate)
 {
 	unsigned long r, w;
 	u64 res, wrap;
 	char r_unit;
 
-	sched_clock_update_fn = update;
+	BUG_ON(bits > 32);
+	WARN_ON(!irqs_disabled());
+	WARN_ON(read_sched_clock != jiffy_sched_clock_read);
+	read_sched_clock = read;
+	sched_clock_mask = (1 << bits) - 1;
 
 	/* calculate the mult/shift to convert counter ticks to ns. */
-	clocks_calc_mult_shift(&cd->mult, &cd->shift, rate, NSEC_PER_SEC, 0);
+	clocks_calc_mult_shift(&cd.mult, &cd.shift, rate, NSEC_PER_SEC, 0);
 
 	r = rate;
 	if (r >= 4000000) {
 		r /= 1000000;
 		r_unit = 'M';
-	} else {
+	} else if (r >= 1000) {
 		r /= 1000;
 		r_unit = 'k';
-	}
+	} else
+		r_unit = ' ';
 
 	/* calculate how many ns until we wrap */
-	wrap = cyc_to_ns((1ULL << clock_bits) - 1, cd->mult, cd->shift);
+	wrap = cyc_to_ns((1ULL << bits) - 1, cd.mult, cd.shift);
 	do_div(wrap, NSEC_PER_MSEC);
 	w = wrap;
 
 	/* calculate the ns resolution of this counter */
-	res = cyc_to_ns(1ULL, cd->mult, cd->shift);
+	res = cyc_to_ns(1ULL, cd.mult, cd.shift);
 	pr_info("sched_clock: %u bits at %lu%cHz, resolution %lluns, wraps every %lums\n",
-		clock_bits, r, r_unit, res, w);
+		bits, r, r_unit, res, w);
 
 	/*
 	 * Start the timer to keep sched_clock() properly updated and
 	 * sets the initial epoch.
 	 */
 	sched_clock_timer.data = msecs_to_jiffies(w - (w / 10));
-	update();
+	update_sched_clock();
 
 	/*
 	 * Ensure that sched_clock() starts off at 0ns
 	 */
-	cd->epoch_ns = 0;
+	cd.epoch_ns = 0;
+
+	pr_debug("Registered %pF as sched_clock source\n", read);
+}
+
+unsigned long long notrace sched_clock(void)
+{
+	u32 cyc = read_sched_clock();
+	return cyc_to_sched_clock(cyc, sched_clock_mask);
 }
 
 void __init sched_clock_postinit(void)
 {
+	/*
+	 * If no sched_clock function has been provided at that point,
+	 * make it the final one one.
+	 */
+	if (read_sched_clock == jiffy_sched_clock_read)
+		setup_sched_clock(jiffy_sched_clock_read, 32, HZ);
+
 	sched_clock_poll(sched_clock_timer.data);
 }

arch/arm/kernel/setup.c

@@ -902,8 +902,6 @@ void __init setup_arch(char **cmdline_p)
 {
 	struct machine_desc *mdesc;
 
-	unwind_init();
-
 	setup_processor();
 	mdesc = setup_machine_fdt(__atags_pointer);
 	if (!mdesc)
@@ -911,6 +909,12 @@ void __init setup_arch(char **cmdline_p)
 	machine_desc = mdesc;
 	machine_name = mdesc->name;
 
+#ifdef CONFIG_ZONE_DMA
+	if (mdesc->dma_zone_size) {
+		extern unsigned long arm_dma_zone_size;
+		arm_dma_zone_size = mdesc->dma_zone_size;
+	}
+#endif
 	if (mdesc->restart_mode)
 		reboot_setup(&mdesc->restart_mode);
 
@@ -945,12 +949,6 @@ void __init setup_arch(char **cmdline_p)
 
 	tcm_init();
 
-#ifdef CONFIG_ZONE_DMA
-	if (mdesc->dma_zone_size) {
-		extern unsigned long arm_dma_zone_size;
-		arm_dma_zone_size = mdesc->dma_zone_size;
-	}
-#endif
 #ifdef CONFIG_MULTI_IRQ_HANDLER
 	handle_arch_irq = mdesc->handle_irq;
 #endif

arch/arm/kernel/smp_twd.c

@@ -10,8 +10,11 @@
  */
 #include <linux/init.h>
 #include <linux/kernel.h>
+#include <linux/clk.h>
+#include <linux/cpufreq.h>
 #include <linux/delay.h>
 #include <linux/device.h>
+#include <linux/err.h>
 #include <linux/smp.h>
 #include <linux/jiffies.h>
 #include <linux/clockchips.h>
@@ -25,6 +28,7 @@
 /* set up by the platform code */
 void __iomem *twd_base;
 
+static struct clk *twd_clk;
 static unsigned long twd_timer_rate;
 
 static struct clock_event_device __percpu **twd_evt;
@@ -89,6 +93,52 @@ void twd_timer_stop(struct clock_event_device *clk)
 	disable_percpu_irq(clk->irq);
 }
 
+#ifdef CONFIG_CPU_FREQ
+
+/*
+ * Updates clockevent frequency when the cpu frequency changes.
+ * Called on the cpu that is changing frequency with interrupts disabled.
+ */
+static void twd_update_frequency(void *data)
+{
+	twd_timer_rate = clk_get_rate(twd_clk);
+
+	clockevents_update_freq(*__this_cpu_ptr(twd_evt), twd_timer_rate);
+}
+
+static int twd_cpufreq_transition(struct notifier_block *nb,
+	unsigned long state, void *data)
+{
+	struct cpufreq_freqs *freqs = data;
+
+	/*
+	 * The twd clock events must be reprogrammed to account for the new
+	 * frequency.  The timer is local to a cpu, so cross-call to the
+	 * changing cpu.
+	 */
+	if (state == CPUFREQ_POSTCHANGE || state == CPUFREQ_RESUMECHANGE)
+		smp_call_function_single(freqs->cpu, twd_update_frequency,
+			NULL, 1);
+
+	return NOTIFY_OK;
+}
+
+static struct notifier_block twd_cpufreq_nb = {
+	.notifier_call = twd_cpufreq_transition,
+};
+
+static int twd_cpufreq_init(void)
+{
+	if (!IS_ERR(twd_clk))
+		return cpufreq_register_notifier(&twd_cpufreq_nb,
+			CPUFREQ_TRANSITION_NOTIFIER);
+
+	return 0;
+}
+core_initcall(twd_cpufreq_init);
+
+#endif
+
 static void __cpuinit twd_calibrate_rate(void)
 {
 	unsigned long count;
@@ -140,6 +190,35 @@ static irqreturn_t twd_handler(int irq, void *dev_id)
 	return IRQ_NONE;
 }
 
+static struct clk *twd_get_clock(void)
+{
+	struct clk *clk;
+	int err;
+
+	clk = clk_get_sys("smp_twd", NULL);
+	if (IS_ERR(clk)) {
+		pr_err("smp_twd: clock not found: %d\n", (int)PTR_ERR(clk));
+		return clk;
+	}
+
+	err = clk_prepare(clk);
+	if (err) {
+		pr_err("smp_twd: clock failed to prepare: %d\n", err);
+		clk_put(clk);
+		return ERR_PTR(err);
+	}
+
+	err = clk_enable(clk);
+	if (err) {
+		pr_err("smp_twd: clock failed to enable: %d\n", err);
+		clk_unprepare(clk);
+		clk_put(clk);
+		return ERR_PTR(err);
+	}
+
+	return clk;
+}
+
 /*
  * Setup the local clock events for a CPU.
  */
@@ -165,7 +244,13 @@ void __cpuinit twd_timer_setup(struct clock_event_device *clk)
 		}
 	}
 
-	twd_calibrate_rate();
+	if (!twd_clk)
+		twd_clk = twd_get_clock();
+
+	if (!IS_ERR_OR_NULL(twd_clk))
+		twd_timer_rate = clk_get_rate(twd_clk);
+	else
+		twd_calibrate_rate();
 
 	clk->name = "local_timer";
 	clk->features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT |
@@ -173,15 +258,11 @@ void __cpuinit twd_timer_setup(struct clock_event_device *clk)
 	clk->rating = 350;
 	clk->set_mode = twd_set_mode;
 	clk->set_next_event = twd_set_next_event;
-	clk->shift = 20;
-	clk->mult = div_sc(twd_timer_rate, NSEC_PER_SEC, clk->shift);
-	clk->max_delta_ns = clockevent_delta2ns(0xffffffff, clk);
-	clk->min_delta_ns = clockevent_delta2ns(0xf, clk);
 
 	this_cpu_clk = __this_cpu_ptr(twd_evt);
 	*this_cpu_clk = clk;
 
-	clockevents_register_device(clk);
-
+	clockevents_config_and_register(clk, twd_timer_rate,
+					0xf, 0xffffffff);
 	enable_percpu_irq(clk->irq, 0);
 }

arch/arm/kernel/swp_emulate.c

@@ -25,6 +25,7 @@
 #include <linux/syscalls.h>
 #include <linux/perf_event.h>
 
+#include <asm/opcodes.h>
 #include <asm/traps.h>
 #include <asm/uaccess.h>
 
@@ -185,6 +186,21 @@ static int swp_handler(struct pt_regs *regs, unsigned int instr)
 
 	perf_sw_event(PERF_COUNT_SW_EMULATION_FAULTS, 1, regs, regs->ARM_pc);
 
+	res = arm_check_condition(instr, regs->ARM_cpsr);
+	switch (res) {
+	case ARM_OPCODE_CONDTEST_PASS:
+		break;
+	case ARM_OPCODE_CONDTEST_FAIL:
+		/* Condition failed - return to next instruction */
+		regs->ARM_pc += 4;
+		return 0;
+	case ARM_OPCODE_CONDTEST_UNCOND:
+		/* If unconditional encoding - not a SWP, undef */
+		return -EFAULT;
+	default:
+		return -EINVAL;
+	}
+
 	if (current->pid != previous_pid) {
 		pr_debug("\"%s\" (%ld) uses deprecated SWP{B} instruction\n",
 			 current->comm, (unsigned long)current->pid);

arch/arm/kernel/tcm.c

@@ -180,9 +180,9 @@ static int __init setup_tcm_bank(u8 type, u8 bank, u8 banks,
  */
 void __init tcm_init(void)
 {
-	u32 tcm_status = read_cpuid_tcmstatus();
-	u8 dtcm_banks = (tcm_status >> 16) & 0x03;
-	u8 itcm_banks = (tcm_status & 0x03);
+	u32 tcm_status;
+	u8 dtcm_banks;
+	u8 itcm_banks;
 	size_t dtcm_code_sz = &__edtcm_data - &__sdtcm_data;
 	size_t itcm_code_sz = &__eitcm_text - &__sitcm_text;
 	char *start;
@@ -191,6 +191,22 @@ void __init tcm_init(void)
 	int ret;
 	int i;
 
+	/*
+	 * Prior to ARMv5 there is no TCM, and trying to read the status
+	 * register will hang the processor.
+	 */
+	if (cpu_architecture() < CPU_ARCH_ARMv5) {
+		if (dtcm_code_sz || itcm_code_sz)
+			pr_info("CPU TCM: %u bytes of DTCM and %u bytes of "
+				"ITCM code compiled in, but no TCM present "
+				"in pre-v5 CPU\n", dtcm_code_sz, itcm_code_sz);
+		return;
+	}
+
+	tcm_status = read_cpuid_tcmstatus();
+	dtcm_banks = (tcm_status >> 16) & 0x03;
+	itcm_banks = (tcm_status & 0x03);
+
 	/* Values greater than 2 for D/ITCM banks are "reserved" */
 	if (dtcm_banks > 2)
 		dtcm_banks = 0;

arch/arm/kernel/unwind.c

@@ -67,7 +67,7 @@ EXPORT_SYMBOL(__aeabi_unwind_cpp_pr2);
 
 struct unwind_ctrl_block {
 	unsigned long vrs[16];		/* virtual register set */
-	unsigned long *insn;		/* pointer to the current instructions word */
+	const unsigned long *insn;	/* pointer to the current instructions word */
 	int entries;			/* number of entries left to interpret */
 	int byte;			/* current byte number in the instructions word */
 };
@@ -83,8 +83,9 @@ enum regs {
 	PC = 15
 };
 
-extern struct unwind_idx __start_unwind_idx[];
-extern struct unwind_idx __stop_unwind_idx[];
+extern const struct unwind_idx __start_unwind_idx[];
+static const struct unwind_idx *__origin_unwind_idx;
+extern const struct unwind_idx __stop_unwind_idx[];
 
 static DEFINE_SPINLOCK(unwind_lock);
 static LIST_HEAD(unwind_tables);
@@ -98,45 +99,99 @@ static LIST_HEAD(unwind_tables);
 })
 
 /*
- * Binary search in the unwind index. The entries entries are
+ * Binary search in the unwind index. The entries are
  * guaranteed to be sorted in ascending order by the linker.
+ *
+ * start = first entry
+ * origin = first entry with positive offset (or stop if there is no such entry)
+ * stop - 1 = last entry
  */
-static struct unwind_idx *search_index(unsigned long addr,
-				       struct unwind_idx *first,
-				       struct unwind_idx *last)
+static const struct unwind_idx *search_index(unsigned long addr,
+				       const struct unwind_idx *start,
+				       const struct unwind_idx *origin,
+				       const struct unwind_idx *stop)
 {
-	pr_debug("%s(%08lx, %p, %p)\n", __func__, addr, first, last);
+	unsigned long addr_prel31;
+
+	pr_debug("%s(%08lx, %p, %p, %p)\n",
+			__func__, addr, start, origin, stop);
+
+	/*
+	 * only search in the section with the matching sign. This way the
+	 * prel31 numbers can be compared as unsigned longs.
+	 */
+	if (addr < (unsigned long)start)
+		/* negative offsets: [start; origin) */
+		stop = origin;
+	else
+		/* positive offsets: [origin; stop) */
+		start = origin;
+
+	/* prel31 for address relavive to start */
+	addr_prel31 = (addr - (unsigned long)start) & 0x7fffffff;
 
-	if (addr < first->addr) {
+	while (start < stop - 1) {
+		const struct unwind_idx *mid = start + ((stop - start) >> 1);
+
+		/*
+		 * As addr_prel31 is relative to start an offset is needed to
+		 * make it relative to mid.
+		 */
+		if (addr_prel31 - ((unsigned long)mid - (unsigned long)start) <
+				mid->addr_offset)
+			stop = mid;
+		else {
+			/* keep addr_prel31 relative to start */
+			addr_prel31 -= ((unsigned long)mid -
+					(unsigned long)start);
+			start = mid;
+		}
+	}
+
+	if (likely(start->addr_offset <= addr_prel31))
+		return start;
+	else {
 		pr_warning("unwind: Unknown symbol address %08lx\n", addr);
 		return NULL;
-	} else if (addr >= last->addr)
-		return last;
+	}
+}
 
-	while (first < last - 1) {
-		struct unwind_idx *mid = first + ((last - first + 1) >> 1);
+static const struct unwind_idx *unwind_find_origin(
+		const struct unwind_idx *start, const struct unwind_idx *stop)
+{
+	pr_debug("%s(%p, %p)\n", __func__, start, stop);
+	while (start < stop) {
+		const struct unwind_idx *mid = start + ((stop - start) >> 1);
 
-		if (addr < mid->addr)
-			last = mid;
+		if (mid->addr_offset >= 0x40000000)
+			/* negative offset */
+			start = mid + 1;
 		else
-			first = mid;
+			/* positive offset */
+			stop = mid;
 	}
-
-	return first;
+	pr_debug("%s -> %p\n", __func__, stop);
+	return stop;
 }
 
-static struct unwind_idx *unwind_find_idx(unsigned long addr)
+static const struct unwind_idx *unwind_find_idx(unsigned long addr)
 {
-	struct unwind_idx *idx = NULL;
+	const struct unwind_idx *idx = NULL;
 	unsigned long flags;
 
 	pr_debug("%s(%08lx)\n", __func__, addr);
 
-	if (core_kernel_text(addr))
+	if (core_kernel_text(addr)) {
+		if (unlikely(!__origin_unwind_idx))
+			__origin_unwind_idx =
+				unwind_find_origin(__start_unwind_idx,
+						__stop_unwind_idx);
+
 		/* main unwind table */
 		idx = search_index(addr, __start_unwind_idx,
-				   __stop_unwind_idx - 1);
-	else {
+				   __origin_unwind_idx,
+				   __stop_unwind_idx);
+	} else {
 		/* module unwind tables */
 		struct unwind_table *table;
 
@@ -145,7 +200,8 @@ static struct unwind_idx *unwind_find_idx(unsigned long addr)
 			if (addr >= table->begin_addr &&
 			    addr < table->end_addr) {
 				idx = search_index(addr, table->start,
-						   table->stop - 1);
+						   table->origin,
+						   table->stop);
 				/* Move-to-front to exploit common traces */
 				list_move(&table->list, &unwind_tables);
 				break;
@@ -274,7 +330,7 @@ static int unwind_exec_insn(struct unwind_ctrl_block *ctrl)
 int unwind_frame(struct stackframe *frame)
 {
 	unsigned long high, low;
-	struct unwind_idx *idx;
+	const struct unwind_idx *idx;
 	struct unwind_ctrl_block ctrl;
 
 	/* only go to a higher address on the stack */
@@ -399,7 +455,6 @@ struct unwind_table *unwind_table_add(unsigned long start, unsigned long size,
 				      unsigned long text_size)
 {
 	unsigned long flags;
-	struct unwind_idx *idx;
 	struct unwind_table *tab = kmalloc(sizeof(*tab), GFP_KERNEL);
 
 	pr_debug("%s(%08lx, %08lx, %08lx, %08lx)\n", __func__, start, size,
@@ -408,15 +463,12 @@ struct unwind_table *unwind_table_add(unsigned long start, unsigned long size,
 	if (!tab)
 		return tab;
 
-	tab->start = (struct unwind_idx *)start;
-	tab->stop = (struct unwind_idx *)(start + size);
+	tab->start = (const struct unwind_idx *)start;
+	tab->stop = (const struct unwind_idx *)(start + size);
+	tab->origin = unwind_find_origin(tab->start, tab->stop);
 	tab->begin_addr = text_addr;
 	tab->end_addr = text_addr + text_size;
 
-	/* Convert the symbol addresses to absolute values */
-	for (idx = tab->start; idx < tab->stop; idx++)
-		idx->addr = prel31_to_addr(&idx->addr);
-
 	spin_lock_irqsave(&unwind_lock, flags);
 	list_add_tail(&tab->list, &unwind_tables);
 	spin_unlock_irqrestore(&unwind_lock, flags);
@@ -437,16 +489,3 @@ void unwind_table_del(struct unwind_table *tab)
 
 	kfree(tab);
 }
-
-int __init unwind_init(void)
-{
-	struct unwind_idx *idx;
-
-	/* Convert the symbol addresses to absolute values */
-	for (idx = __start_unwind_idx; idx < __stop_unwind_idx; idx++)
-		idx->addr = prel31_to_addr(&idx->addr);
-
-	pr_debug("unwind: ARM stack unwinding initialised\n");
-
-	return 0;
-}

arch/arm/mach-at91/at91cap9.c

@@ -313,7 +313,7 @@ static struct at91_gpio_bank at91cap9_gpio[] = {
 	}
 };
 
-static void at91cap9_reset(void)
+static void at91cap9_restart(char mode, const char *cmd)
 {
 	at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST);
 }
@@ -335,7 +335,7 @@ static void __init at91cap9_map_io(void)
 
 static void __init at91cap9_initialize(void)
 {
-	at91_arch_reset = at91cap9_reset;
+	arm_pm_restart = at91cap9_restart;
 	pm_power_off = at91cap9_poweroff;
 	at91_extern_irq = (1 << AT91CAP9_ID_IRQ0) | (1 << AT91CAP9_ID_IRQ1);
 

arch/arm/mach-at91/at91rm9200.c

@@ -288,7 +288,7 @@ static struct at91_gpio_bank at91rm9200_gpio[] = {
 	}
 };
 
-static void at91rm9200_reset(void)
+static void at91rm9200_restart(char mode, const char *cmd)
 {
 	/*
 	 * Perform a hardware reset with the use of the Watchdog timer.
@@ -309,7 +309,7 @@ static void __init at91rm9200_map_io(void)
 
 static void __init at91rm9200_initialize(void)
 {
-	at91_arch_reset = at91rm9200_reset;
+	arm_pm_restart = at91rm9200_restart;
 	at91_extern_irq = (1 << AT91RM9200_ID_IRQ0) | (1 << AT91RM9200_ID_IRQ1)
 			| (1 << AT91RM9200_ID_IRQ2) | (1 << AT91RM9200_ID_IRQ3)
 			| (1 << AT91RM9200_ID_IRQ4) | (1 << AT91RM9200_ID_IRQ5)

arch/arm/mach-at91/at91sam9260.c

@@ -327,7 +327,7 @@ static void __init at91sam9260_map_io(void)
 
 static void __init at91sam9260_initialize(void)
 {
-	at91_arch_reset = at91sam9_alt_reset;
+	arm_pm_restart = at91sam9_alt_restart;
 	pm_power_off = at91sam9260_poweroff;
 	at91_extern_irq = (1 << AT91SAM9260_ID_IRQ0) | (1 << AT91SAM9260_ID_IRQ1)
 			| (1 << AT91SAM9260_ID_IRQ2);

arch/arm/mach-at91/at91sam9261.c

@@ -287,7 +287,7 @@ static void __init at91sam9261_map_io(void)
 
 static void __init at91sam9261_initialize(void)
 {
-	at91_arch_reset = at91sam9_alt_reset;
+	arm_pm_restart = at91sam9_alt_restart;
 	pm_power_off = at91sam9261_poweroff;
 	at91_extern_irq = (1 << AT91SAM9261_ID_IRQ0) | (1 << AT91SAM9261_ID_IRQ1)
 			| (1 << AT91SAM9261_ID_IRQ2);

arch/arm/mach-at91/at91sam9263.c

@@ -305,7 +305,7 @@ static void __init at91sam9263_map_io(void)
 
 static void __init at91sam9263_initialize(void)
 {
-	at91_arch_reset = at91sam9_alt_reset;
+	arm_pm_restart = at91sam9_alt_restart;
 	pm_power_off = at91sam9263_poweroff;
 	at91_extern_irq = (1 << AT91SAM9263_ID_IRQ0) | (1 << AT91SAM9263_ID_IRQ1);
 

arch/arm/mach-at91/at91sam9_alt_reset.S

@@ -14,20 +14,15 @@
  */
 
 #include <linux/linkage.h>
-#include <asm/system.h>
 #include <mach/hardware.h>
 #include <mach/at91sam9_sdramc.h>
 #include <mach/at91_rstc.h>
 
 			.arm
 
-			.globl	at91sam9_alt_reset
+			.globl	at91sam9_alt_restart
 
-at91sam9_alt_reset:	mrc	p15, 0, r0, c1, c0, 0
-			orr	r0, r0, #CR_I
-			mcr	p15, 0, r0, c1, c0, 0		@ enable I-cache
-
-			ldr	r0, .at91_va_base_sdramc	@ preload constants
+at91sam9_alt_restart:	ldr	r0, .at91_va_base_sdramc	@ preload constants
 			ldr	r1, .at91_va_base_rstc_cr
 
 			mov	r2, #1

arch/arm/mach-at91/at91sam9g45.c

@@ -317,7 +317,7 @@ static struct at91_gpio_bank at91sam9g45_gpio[] = {
 	}
 };
 
-static void at91sam9g45_reset(void)
+static void at91sam9g45_restart(char mode, const char *cmd)
 {
 	at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST);
 }
@@ -340,7 +340,7 @@ static void __init at91sam9g45_map_io(void)
 
 static void __init at91sam9g45_initialize(void)
 {
-	at91_arch_reset = at91sam9g45_reset;
+	arm_pm_restart = at91sam9g45_restart;
 	pm_power_off = at91sam9g45_poweroff;
 	at91_extern_irq = (1 << AT91SAM9G45_ID_IRQ0);
 

arch/arm/mach-at91/at91sam9rl.c

@@ -292,7 +292,7 @@ static void __init at91sam9rl_map_io(void)
 
 static void __init at91sam9rl_initialize(void)
 {
-	at91_arch_reset = at91sam9_alt_reset;
+	arm_pm_restart = at91sam9_alt_restart;
 	pm_power_off = at91sam9rl_poweroff;
 	at91_extern_irq = (1 << AT91SAM9RL_ID_IRQ0);
 

arch/arm/mach-at91/generic.h

@@ -57,7 +57,7 @@ extern void at91_irq_suspend(void);
 extern void at91_irq_resume(void);
 
 /* reset */
-extern void at91sam9_alt_reset(void);
+extern void at91sam9_alt_restart(char, const char *);
 
  /* GPIO */
 #define AT91RM9200_PQFP		3	/* AT91RM9200 PQFP package has 3 banks */
@@ -71,5 +71,4 @@ struct at91_gpio_bank {
 extern void __init at91_gpio_init(struct at91_gpio_bank *, int nr_banks);
 extern void __init at91_gpio_irq_setup(void);
 
-extern void (*at91_arch_reset)(void);
 extern int at91_extern_irq;

arch/arm/mach-at91/include/mach/system.h

@@ -47,13 +47,4 @@ static inline void arch_idle(void)
 #endif
 }
 
-void (*at91_arch_reset)(void);
-
-static inline void arch_reset(char mode, const char *cmd)
-{
-	/* call the CPU-specific reset function */
-	if (at91_arch_reset)
-		(at91_arch_reset)();
-}
-
 #endif

arch/arm/mach-bcmring/arch.c

@@ -49,7 +49,29 @@ HW_DECLARE_SPINLOCK(gpio)
 #endif
 
 /* sysctl */
-int bcmring_arch_warm_reboot;	/* do a warm reboot on hard reset */
+static int bcmring_arch_warm_reboot;	/* do a warm reboot on hard reset */
+
+static void bcmring_restart(char mode, const char *cmd)
+{
+	printk("arch_reset:%c %x\n", mode, bcmring_arch_warm_reboot);
+
+	if (mode == 'h') {
+		/* Reboot configured in proc entry */
+		if (bcmring_arch_warm_reboot) {
+			printk("warm reset\n");
+			/* Issue Warm reset (do not reset ethernet switch, keep alive) */
+			chipcHw_reset(chipcHw_REG_SOFT_RESET_CHIP_WARM);
+		} else {
+			/* Force reset of everything */
+			printk("force reset\n");
+			chipcHw_reset(chipcHw_REG_SOFT_RESET_CHIP_SOFT);
+		}
+	} else {
+		/* Force reset of everything */
+		printk("force reset\n");
+		chipcHw_reset(chipcHw_REG_SOFT_RESET_CHIP_SOFT);
+	}
+}
 
 static struct ctl_table_header *bcmring_sysctl_header;
 
@@ -173,4 +195,5 @@ MACHINE_START(BCMRING, "BCMRING")
 	.init_irq = bcmring_init_irq,
 	.timer = &bcmring_timer,
 	.init_machine = bcmring_init_machine
+	.restart = bcmring_restart,
 MACHINE_END

arch/arm/mach-bcmring/include/mach/system.h

@@ -20,35 +20,9 @@
 #ifndef __ASM_ARCH_SYSTEM_H
 #define __ASM_ARCH_SYSTEM_H
 
-#include <mach/csp/chipcHw_inline.h>
-
-extern int bcmring_arch_warm_reboot;
-
 static inline void arch_idle(void)
 {
 	cpu_do_idle();
 }
 
-static inline void arch_reset(char mode, const char *cmd)
-{
-	printk("arch_reset:%c %x\n", mode, bcmring_arch_warm_reboot);
-
-	if (mode == 'h') {
-		/* Reboot configured in proc entry */
-		if (bcmring_arch_warm_reboot) {
-			printk("warm reset\n");
-			/* Issue Warm reset (do not reset ethernet switch, keep alive) */
-			chipcHw_reset(chipcHw_REG_SOFT_RESET_CHIP_WARM);
-		} else {
-			/* Force reset of everything */
-			printk("force reset\n");
-			chipcHw_reset(chipcHw_REG_SOFT_RESET_CHIP_SOFT);
-		}
-	} else {
-		/* Force reset of everything */
-		printk("force reset\n");
-		chipcHw_reset(chipcHw_REG_SOFT_RESET_CHIP_SOFT);
-	}
-}
-
 #endif

arch/arm/mach-clps711x/autcpu12.c

@@ -68,5 +68,6 @@ MACHINE_START(AUTCPU12, "autronix autcpu12")
 	.map_io		= autcpu12_map_io,
 	.init_irq	= clps711x_init_irq,
 	.timer		= &clps711x_timer,
+	.restart	= clps711x_restart,
 MACHINE_END
 

arch/arm/mach-clps711x/cdb89712.c

@@ -59,4 +59,5 @@ MACHINE_START(CDB89712, "Cirrus-CDB89712")
 	.map_io		= cdb89712_map_io,
 	.init_irq	= clps711x_init_irq,
 	.timer		= &clps711x_timer,
+	.restart	= clps711x_restart,
 MACHINE_END

arch/arm/mach-clps711x/ceiva.c

@@ -60,4 +60,5 @@ MACHINE_START(CEIVA, "CEIVA/Polaroid Photo MAX Digital Picture Frame")
 	.map_io		= ceiva_map_io,
 	.init_irq	= clps711x_init_irq,
 	.timer		= &clps711x_timer,
+	.restart	= clps711x_restart,
 MACHINE_END

arch/arm/mach-clps711x/clep7312.c

@@ -41,5 +41,6 @@ MACHINE_START(CLEP7212, "Cirrus Logic 7212/7312")
 	.map_io		= clps711x_map_io,
 	.init_irq	= clps711x_init_irq,
 	.timer		= &clps711x_timer,
+	.restart	= clps711x_restart,
 MACHINE_END
 

arch/arm/mach-clps711x/common.c

@@ -220,3 +220,8 @@ struct sys_timer clps711x_timer = {
 	.init		= clps711x_timer_init,
 	.offset		= clps711x_gettimeoffset,
 };
+
+void clps711x_restart(char mode, const char *cmd)
+{
+	soft_restart(0);
+}

arch/arm/mach-clps711x/common.h

@@ -9,3 +9,4 @@ struct sys_timer;
 extern void clps711x_map_io(void);
 extern void clps711x_init_irq(void);
 extern struct sys_timer clps711x_timer;
+extern void clps711x_restart(char mode, const char *cmd);

arch/arm/mach-clps711x/edb7211-arch.c

@@ -62,4 +62,5 @@ MACHINE_START(EDB7211, "CL-EDB7211 (EP7211 eval board)")
 	.reserve	= edb7211_reserve,
 	.init_irq	= clps711x_init_irq,
 	.timer		= &clps711x_timer,
+	.restart	= clps711x_restart,
 MACHINE_END

arch/arm/mach-clps711x/fortunet.c

@@ -78,4 +78,5 @@ MACHINE_START(FORTUNET, "ARM-FortuNet")
 	.map_io		= clps711x_map_io,
 	.init_irq	= clps711x_init_irq,
 	.timer		= &clps711x_timer,
+	.restart	= clps711x_restart,
 MACHINE_END

arch/arm/mach-clps711x/include/mach/system.h

@@ -32,9 +32,4 @@ static inline void arch_idle(void)
 	mov	r0, r0");
 }
 
-static inline void arch_reset(char mode, const char *cmd)
-{
-	soft_restart(0);
-}
-
 #endif

arch/arm/mach-clps711x/p720t.c

@@ -93,6 +93,7 @@ MACHINE_START(P720T, "ARM-Prospector720T")
 	.map_io		= p720t_map_io,
 	.init_irq	= clps711x_init_irq,
 	.timer		= &clps711x_timer,
+	.restart	= clps711x_restart,
 MACHINE_END
 
 static int p720t_hw_init(void)

arch/arm/mach-cns3xxx/cns3420vb.c

@@ -204,4 +204,5 @@ MACHINE_START(CNS3420VB, "Cavium Networks CNS3420 Validation Board")
 	.timer		= &cns3xxx_timer,
 	.handle_irq	= gic_handle_irq,
 	.init_machine	= cns3420_init,
+	.restart	= cns3xxx_restart,
 MACHINE_END

arch/arm/mach-cns3xxx/core.h

@@ -22,5 +22,6 @@ static inline void cns3xxx_l2x0_init(void) {}
 void __init cns3xxx_map_io(void);
 void __init cns3xxx_init_irq(void);
 void cns3xxx_power_off(void);
+void cns3xxx_restart(char, const char *);
 
 #endif /* __CNS3XXX_CORE_H */

arch/arm/mach-cns3xxx/include/mach/system.h

@@ -11,7 +11,6 @@
 #ifndef __MACH_SYSTEM_H
 #define __MACH_SYSTEM_H
 
-#include <linux/io.h>
 #include <asm/proc-fns.h>
 
 static inline void arch_idle(void)
@@ -23,6 +22,4 @@ static inline void arch_idle(void)
 	cpu_do_idle();
 }
 
-void arch_reset(char mode, const char *cmd);
-
 #endif

arch/arm/mach-cns3xxx/pm.c

@@ -11,9 +11,9 @@
 #include <linux/io.h>
 #include <linux/delay.h>
 #include <linux/atomic.h>
-#include <mach/system.h>
 #include <mach/cns3xxx.h>
 #include <mach/pm.h>
+#include "core.h"
 
 void cns3xxx_pwr_clk_en(unsigned int block)
 {
@@ -89,7 +89,7 @@ void cns3xxx_pwr_soft_rst(unsigned int block)
 }
 EXPORT_SYMBOL(cns3xxx_pwr_soft_rst);
 
-void arch_reset(char mode, const char *cmd)
+void cns3xxx_restart(char mode, const char *cmd)
 {
 	/*
 	 * To reset, we hit the on-board reset register

arch/arm/mach-davinci/board-da830-evm.c

@@ -682,4 +682,5 @@ MACHINE_START(DAVINCI_DA830_EVM, "DaVinci DA830/OMAP-L137/AM17x EVM")
 	.timer		= &davinci_timer,
 	.init_machine	= da830_evm_init,
 	.dma_zone_size	= SZ_128M,
+	.restart	= da8xx_restart,
 MACHINE_END

arch/arm/mach-davinci/board-da850-evm.c

@@ -1411,4 +1411,5 @@ MACHINE_START(DAVINCI_DA850_EVM, "DaVinci DA850/OMAP-L138/AM18x EVM")
 	.timer		= &davinci_timer,
 	.init_machine	= da850_evm_init,
 	.dma_zone_size	= SZ_128M,
+	.restart	= da8xx_restart,
 MACHINE_END

arch/arm/mach-davinci/board-dm355-evm.c

@@ -357,4 +357,5 @@ MACHINE_START(DAVINCI_DM355_EVM, "DaVinci DM355 EVM")
 	.timer	      = &davinci_timer,
 	.init_machine = dm355_evm_init,
 	.dma_zone_size	= SZ_128M,
+	.restart	= davinci_restart,
 MACHINE_END

arch/arm/mach-davinci/board-dm355-leopard.c

@@ -276,4 +276,5 @@ MACHINE_START(DM355_LEOPARD, "DaVinci DM355 leopard")
 	.timer	      = &davinci_timer,
 	.init_machine = dm355_leopard_init,
 	.dma_zone_size	= SZ_128M,
+	.restart	= davinci_restart,
 MACHINE_END

arch/arm/mach-davinci/board-dm365-evm.c

@@ -618,5 +618,6 @@ MACHINE_START(DAVINCI_DM365_EVM, "DaVinci DM365 EVM")
 	.timer		= &davinci_timer,
 	.init_machine	= dm365_evm_init,
 	.dma_zone_size	= SZ_128M,
+	.restart	= davinci_restart,
 MACHINE_END
 

arch/arm/mach-davinci/board-dm644x-evm.c

@@ -719,4 +719,5 @@ MACHINE_START(DAVINCI_EVM, "DaVinci DM644x EVM")
 	.timer	      = &davinci_timer,
 	.init_machine = davinci_evm_init,
 	.dma_zone_size	= SZ_128M,
+	.restart	= davinci_restart,
 MACHINE_END

arch/arm/mach-davinci/board-dm646x-evm.c

@@ -799,6 +799,7 @@ MACHINE_START(DAVINCI_DM6467_EVM, "DaVinci DM646x EVM")
 	.timer        = &davinci_timer,
 	.init_machine = evm_init,
 	.dma_zone_size	= SZ_128M,
+	.restart	= davinci_restart,
 MACHINE_END
 
 MACHINE_START(DAVINCI_DM6467TEVM, "DaVinci DM6467T EVM")
@@ -808,5 +809,6 @@ MACHINE_START(DAVINCI_DM6467TEVM, "DaVinci DM6467T EVM")
 	.timer        = &davinci_timer,
 	.init_machine = evm_init,
 	.dma_zone_size	= SZ_128M,
+	.restart	= davinci_restart,
 MACHINE_END
 

arch/arm/mach-davinci/board-mityomapl138.c

@@ -573,4 +573,5 @@ MACHINE_START(MITYOMAPL138, "MityDSP-L138/MityARM-1808")
 	.timer		= &davinci_timer,
 	.init_machine	= mityomapl138_init,
 	.dma_zone_size	= SZ_128M,
+	.restart	= da8xx_restart,
 MACHINE_END

arch/arm/mach-davinci/board-neuros-osd2.c

@@ -278,4 +278,5 @@ MACHINE_START(NEUROS_OSD2, "Neuros OSD2")
 	.timer		= &davinci_timer,
 	.init_machine = davinci_ntosd2_init,
 	.dma_zone_size	= SZ_128M,
+	.restart	= davinci_restart,
 MACHINE_END

arch/arm/mach-davinci/board-omapl138-hawk.c

@@ -344,4 +344,5 @@ MACHINE_START(OMAPL138_HAWKBOARD, "AM18x/OMAP-L138 Hawkboard")
 	.timer		= &davinci_timer,
 	.init_machine	= omapl138_hawk_init,
 	.dma_zone_size	= SZ_128M,
+	.restart	= da8xx_restart,
 MACHINE_END

arch/arm/mach-davinci/board-sffsdr.c

@@ -157,4 +157,5 @@ MACHINE_START(SFFSDR, "Lyrtech SFFSDR")
 	.timer	      = &davinci_timer,
 	.init_machine = davinci_sffsdr_init,
 	.dma_zone_size	= SZ_128M,
+	.restart	= davinci_restart,
 MACHINE_END

arch/arm/mach-davinci/board-tnetv107x-evm.c

@@ -283,4 +283,5 @@ MACHINE_START(TNETV107X, "TNETV107X EVM")
 	.timer		= &davinci_timer,
 	.init_machine	= tnetv107x_evm_board_init,
 	.dma_zone_size	= SZ_128M,
+	.restart	= tnetv107x_restart,
 MACHINE_END

arch/arm/mach-davinci/common.c

@@ -97,9 +97,6 @@ void __init davinci_common_init(struct davinci_soc_info *soc_info)
 	local_flush_tlb_all();
 	flush_cache_all();
 
-	if (!davinci_soc_info.reset)
-		davinci_soc_info.reset = davinci_watchdog_reset;
-
 	/*
 	 * We want to check CPU revision early for cpu_is_xxxx() macros.
 	 * IO space mapping must be initialized before we can do that.

arch/arm/mach-davinci/da830.c

@@ -1201,7 +1201,6 @@ static struct davinci_soc_info davinci_soc_info_da830 = {
 	.gpio_irq		= IRQ_DA8XX_GPIO0,
 	.serial_dev		= &da8xx_serial_device,
 	.emac_pdata		= &da8xx_emac_pdata,
-	.reset_device		= &da8xx_wdt_device,
 };
 
 void __init da830_init(void)

arch/arm/mach-davinci/da850.c

@@ -1121,7 +1121,6 @@ static struct davinci_soc_info davinci_soc_info_da850 = {
 	.emac_pdata		= &da8xx_emac_pdata,
 	.sram_dma		= DA8XX_ARM_RAM_BASE,
 	.sram_len		= SZ_8K,
-	.reset_device		= &da8xx_wdt_device,
 };
 
 void __init da850_init(void)

arch/arm/mach-davinci/devices-da8xx.c

@@ -363,6 +363,11 @@ struct platform_device da8xx_wdt_device = {
 	.resource	= da8xx_watchdog_resources,
 };
 
+void da8xx_restart(char mode, const char *cmd)
+{
+	davinci_watchdog_reset(&da8xx_wdt_device);
+}
+
 int __init da8xx_register_watchdog(void)
 {
 	return platform_device_register(&da8xx_wdt_device);

arch/arm/mach-davinci/devices.c

@@ -291,6 +291,11 @@ struct platform_device davinci_wdt_device = {
 	.resource	= wdt_resources,
 };
 
+void davinci_restart(char mode, const char *cmd)
+{
+	davinci_watchdog_reset(&davinci_wdt_device);
+}
+
 static void davinci_init_wdt(void)
 {
 	platform_device_register(&davinci_wdt_device);

arch/arm/mach-davinci/dm355.c

@@ -853,7 +853,6 @@ static struct davinci_soc_info davinci_soc_info_dm355 = {
 	.serial_dev		= &dm355_serial_device,
 	.sram_dma		= 0x00010000,
 	.sram_len		= SZ_32K,
-	.reset_device		= &davinci_wdt_device,
 };
 
 void __init dm355_init_asp1(u32 evt_enable, struct snd_platform_data *pdata)

arch/arm/mach-davinci/dm365.c

@@ -1083,7 +1083,6 @@ static struct davinci_soc_info davinci_soc_info_dm365 = {
 	.emac_pdata		= &dm365_emac_pdata,
 	.sram_dma		= 0x00010000,
 	.sram_len		= SZ_32K,
-	.reset_device		= &davinci_wdt_device,
 };
 
 void __init dm365_init_asp(struct snd_platform_data *pdata)

arch/arm/mach-davinci/dm644x.c

@@ -767,7 +767,6 @@ static struct davinci_soc_info davinci_soc_info_dm644x = {
 	.emac_pdata		= &dm644x_emac_pdata,
 	.sram_dma		= 0x00008000,
 	.sram_len		= SZ_16K,
-	.reset_device		= &davinci_wdt_device,
 };
 
 void __init dm644x_init_asp(struct snd_platform_data *pdata)

arch/arm/mach-davinci/dm646x.c

@@ -854,7 +854,6 @@ static struct davinci_soc_info davinci_soc_info_dm646x = {
 	.emac_pdata		= &dm646x_emac_pdata,
 	.sram_dma		= 0x10010000,
 	.sram_len		= SZ_32K,
-	.reset_device		= &davinci_wdt_device,
 };
 
 void __init dm646x_init_mcasp0(struct snd_platform_data *pdata)

arch/arm/mach-davinci/include/mach/common.h

@@ -77,14 +77,13 @@ struct davinci_soc_info {
 	struct emac_platform_data	*emac_pdata;
 	dma_addr_t			sram_dma;
 	unsigned			sram_len;
-	struct platform_device		*reset_device;
-	void				(*reset)(struct platform_device *);
 };
 
 extern struct davinci_soc_info davinci_soc_info;
 
 extern void davinci_common_init(struct davinci_soc_info *soc_info);
 extern void davinci_init_ide(void);
+void davinci_restart(char mode, const char *cmd);
 
 /* standard place to map on-chip SRAMs; they *may* support DMA */
 #define SRAM_VIRT	0xfffe0000

arch/arm/mach-davinci/include/mach/da8xx.h

@@ -91,6 +91,7 @@ int da8xx_register_cpuidle(void);
 void __iomem * __init da8xx_get_mem_ctlr(void);
 int da850_register_pm(struct platform_device *pdev);
 int __init da850_register_sata(unsigned long refclkpn);
+void da8xx_restart(char mode, const char *cmd);
 
 extern struct platform_device da8xx_serial_device;
 extern struct emac_platform_data da8xx_emac_pdata;

arch/arm/mach-davinci/include/mach/system.h

@@ -18,10 +18,4 @@ static inline void arch_idle(void)
 	cpu_do_idle();
 }
 
-static inline void arch_reset(char mode, const char *cmd)
-{
-	if (davinci_soc_info.reset)
-		davinci_soc_info.reset(davinci_soc_info.reset_device);
-}
-
 #endif /* __ASM_ARCH_SYSTEM_H */

arch/arm/mach-davinci/include/mach/tnetv107x.h

@@ -54,6 +54,7 @@ extern struct platform_device tnetv107x_serial_device;
 extern void __init tnetv107x_init(void);
 extern void __init tnetv107x_devices_init(struct tnetv107x_device_info *);
 extern void __init tnetv107x_irq_init(void);
+void tnetv107x_restart(char mode, const char *cmd);
 
 #endif
 

arch/arm/mach-davinci/tnetv107x.c

@@ -730,6 +730,11 @@ static void tnetv107x_watchdog_reset(struct platform_device *pdev)
 	__raw_writel(1, &regs->kick);
 }
 
+void tnetv107x_restart(char mode, const char *cmd)
+{
+	tnetv107x_watchdog_reset(&tnetv107x_wdt_device);
+}
+
 static struct davinci_soc_info tnetv107x_soc_info = {
 	.io_desc		= io_desc,
 	.io_desc_num		= ARRAY_SIZE(io_desc),
@@ -752,8 +757,6 @@ static struct davinci_soc_info tnetv107x_soc_info = {
 	.gpio_num		= TNETV107X_N_GPIO,
 	.timer_info		= &timer_info,
 	.serial_dev		= &tnetv107x_serial_device,
-	.reset			= tnetv107x_watchdog_reset,
-	.reset_device		= &tnetv107x_wdt_device,
 };
 
 void __init tnetv107x_init(void)

arch/arm/mach-dove/cm-a510.c

@@ -93,4 +93,5 @@ MACHINE_START(CM_A510, "Compulab CM-A510 Board")
 	.init_early	= dove_init_early,
 	.init_irq	= dove_init_irq,
 	.timer		= &dove_timer,
+	.restart	= dove_restart,
 MACHINE_END

arch/arm/mach-dove/common.c

@@ -292,3 +292,19 @@ void __init dove_init(void)
 	dove_xor0_init();
 	dove_xor1_init();
 }
+
+void dove_restart(char mode, const char *cmd)
+{
+	/*
+	 * Enable soft reset to assert RSTOUTn.
+	 */
+	writel(SOFT_RESET_OUT_EN, RSTOUTn_MASK);
+
+	/*
+	 * Assert soft reset.
+	 */
+	writel(SOFT_RESET, SYSTEM_SOFT_RESET);
+
+	while (1)
+		;
+}

arch/arm/mach-dove/common.h

@@ -39,5 +39,6 @@ void dove_spi1_init(void);
 void dove_i2c_init(void);
 void dove_sdio0_init(void);
 void dove_sdio1_init(void);
+void dove_restart(char, const char *);
 
 #endif

arch/arm/mach-dove/dove-db-setup.c

@@ -100,4 +100,5 @@ MACHINE_START(DOVE_DB, "Marvell DB-MV88AP510-BP Development Board")
 	.init_early	= dove_init_early,
 	.init_irq	= dove_init_irq,
 	.timer		= &dove_timer,
+	.restart	= dove_restart,
 MACHINE_END

arch/arm/mach-dove/include/mach/system.h

@@ -9,28 +9,9 @@
 #ifndef __ASM_ARCH_SYSTEM_H
 #define __ASM_ARCH_SYSTEM_H
 
-#include <mach/bridge-regs.h>
-
 static inline void arch_idle(void)
 {
 	cpu_do_idle();
 }
 
-static inline void arch_reset(char mode, const char *cmd)
-{
-	/*
-	 * Enable soft reset to assert RSTOUTn.
-	 */
-	writel(SOFT_RESET_OUT_EN, RSTOUTn_MASK);
-
-	/*
-	 * Assert soft reset.
-	 */
-	writel(SOFT_RESET, SYSTEM_SOFT_RESET);
-
-	while (1)
-		;
-}
-
-
 #endif

arch/arm/mach-ebsa110/core.c

@@ -278,6 +278,11 @@ static int __init ebsa110_init(void)
 
 arch_initcall(ebsa110_init);
 
+static void ebsa110_restart(char mode, const char *cmd)
+{
+	soft_restart(0x80000000);
+}
+
 MACHINE_START(EBSA110, "EBSA110")
 	/* Maintainer: Russell King */
 	.atag_offset	= 0x400,
@@ -287,4 +292,5 @@ MACHINE_START(EBSA110, "EBSA110")
 	.map_io		= ebsa110_map_io,
 	.init_irq	= ebsa110_init_irq,
 	.timer		= &ebsa110_timer,
+	.restart	= ebsa110_restart,
 MACHINE_END

arch/arm/mach-ebsa110/include/mach/system.h

@@ -34,6 +34,4 @@ static inline void arch_idle(void)
 	asm volatile ("mcr p15, 0, ip, c15, c1, 2" : : : "cc");
 }
 
-#define arch_reset(mode, cmd)	soft_restart(0x80000000)
-
 #endif

arch/arm/mach-ep93xx/adssphere.c

@@ -40,4 +40,5 @@ MACHINE_START(ADSSPHERE, "ADS Sphere board")
 	.handle_irq	= vic_handle_irq,
 	.timer		= &ep93xx_timer,
 	.init_machine	= adssphere_init_machine,
+	.restart	= ep93xx_restart,
 MACHINE_END

arch/arm/mach-ep93xx/core.c

@@ -906,3 +906,15 @@ void __init ep93xx_init_devices(void)
 	platform_device_register(&ep93xx_ohci_device);
 	platform_device_register(&ep93xx_leds);
 }
+
+void ep93xx_restart(char mode, const char *cmd)
+{
+	/*
+	 * Set then clear the SWRST bit to initiate a software reset
+	 */
+	ep93xx_devcfg_set_bits(EP93XX_SYSCON_DEVCFG_SWRST);
+	ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_SWRST);
+
+	while (1)
+		;
+}

arch/arm/mach-ep93xx/edb93xx.c

@@ -254,6 +254,7 @@ MACHINE_START(EDB9301, "Cirrus Logic EDB9301 Evaluation Board")
 	.handle_irq	= vic_handle_irq,
 	.timer		= &ep93xx_timer,
 	.init_machine	= edb93xx_init_machine,
+	.restart	= ep93xx_restart,
 MACHINE_END
 #endif
 
@@ -266,6 +267,7 @@ MACHINE_START(EDB9302, "Cirrus Logic EDB9302 Evaluation Board")
 	.handle_irq	= vic_handle_irq,
 	.timer		= &ep93xx_timer,
 	.init_machine	= edb93xx_init_machine,
+	.restart	= ep93xx_restart,
 MACHINE_END
 #endif
 
@@ -278,6 +280,7 @@ MACHINE_START(EDB9302A, "Cirrus Logic EDB9302A Evaluation Board")
 	.handle_irq	= vic_handle_irq,
 	.timer		= &ep93xx_timer,
 	.init_machine	= edb93xx_init_machine,
+	.restart	= ep93xx_restart,
 MACHINE_END
 #endif
 
@@ -290,6 +293,7 @@ MACHINE_START(EDB9307, "Cirrus Logic EDB9307 Evaluation Board")
 	.handle_irq	= vic_handle_irq,
 	.timer		= &ep93xx_timer,
 	.init_machine	= edb93xx_init_machine,
+	.restart	= ep93xx_restart,
 MACHINE_END
 #endif
 
@@ -302,6 +306,7 @@ MACHINE_START(EDB9307A, "Cirrus Logic EDB9307A Evaluation Board")
 	.handle_irq	= vic_handle_irq,
 	.timer		= &ep93xx_timer,
 	.init_machine	= edb93xx_init_machine,
+	.restart	= ep93xx_restart,
 MACHINE_END
 #endif
 
@@ -314,6 +319,7 @@ MACHINE_START(EDB9312, "Cirrus Logic EDB9312 Evaluation Board")
 	.handle_irq	= vic_handle_irq,
 	.timer		= &ep93xx_timer,
 	.init_machine	= edb93xx_init_machine,
+	.restart	= ep93xx_restart,
 MACHINE_END
 #endif
 
@@ -326,6 +332,7 @@ MACHINE_START(EDB9315, "Cirrus Logic EDB9315 Evaluation Board")
 	.handle_irq	= vic_handle_irq,
 	.timer		= &ep93xx_timer,
 	.init_machine	= edb93xx_init_machine,
+	.restart	= ep93xx_restart,
 MACHINE_END
 #endif
 
@@ -338,5 +345,6 @@ MACHINE_START(EDB9315A, "Cirrus Logic EDB9315A Evaluation Board")
 	.handle_irq	= vic_handle_irq,
 	.timer		= &ep93xx_timer,
 	.init_machine	= edb93xx_init_machine,
+	.restart	= ep93xx_restart,
 MACHINE_END
 #endif

arch/arm/mach-ep93xx/gesbc9312.c

@@ -40,4 +40,5 @@ MACHINE_START(GESBC9312, "Glomation GESBC-9312-sx")
 	.handle_irq	= vic_handle_irq,
 	.timer		= &ep93xx_timer,
 	.init_machine	= gesbc9312_init_machine,
+	.restart	= ep93xx_restart,
 MACHINE_END

arch/arm/mach-ep93xx/include/mach/platform.h

@@ -66,4 +66,6 @@ void ep93xx_register_ac97(void);
 void ep93xx_init_devices(void);
 extern struct sys_timer ep93xx_timer;
 
+void ep93xx_restart(char, const char *);
+
 #endif

arch/arm/mach-ep93xx/include/mach/system.h

@@ -1,22 +1,7 @@
 /*
  * arch/arm/mach-ep93xx/include/mach/system.h
  */
-
-#include <mach/hardware.h>
-
 static inline void arch_idle(void)
 {
 	cpu_do_idle();
 }
-
-static inline void arch_reset(char mode, const char *cmd)
-{
-	/*
-	 * Set then clear the SWRST bit to initiate a software reset
-	 */
-	ep93xx_devcfg_set_bits(EP93XX_SYSCON_DEVCFG_SWRST);
-	ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_SWRST);
-
-	while (1)
-		;
-}