i2c: Use <linux/io.h> instead of <asm/io.h>

As warned by checkpatch.pl, <linux/io.h> should be used instead of
<asm/io.h>.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

drivers/i2c/busses/i2c-ali1535.c

@@ -60,7 +60,7 @@
 #include <linux/i2c.h>
 #include <linux/init.h>
 #include <linux/acpi.h>
-#include <asm/io.h>
+#include <linux/io.h>
 
 
 /* ALI1535 SMBus address offsets */

drivers/i2c/busses/i2c-ali15x3.c

@@ -67,7 +67,7 @@
 #include <linux/i2c.h>
 #include <linux/init.h>
 #include <linux/acpi.h>
-#include <asm/io.h>
+#include <linux/io.h>
 
 /* ALI15X3 SMBus address offsets */
 #define SMBHSTSTS	(0 + ali15x3_smba)

drivers/i2c/busses/i2c-amd756.c

@@ -43,7 +43,7 @@
 #include <linux/i2c.h>
 #include <linux/init.h>
 #include <linux/acpi.h>
-#include <asm/io.h>
+#include <linux/io.h>
 
 /* AMD756 SMBus address offsets */
 #define SMB_ADDR_OFFSET		0xE0

drivers/i2c/busses/i2c-amd8111.c

@@ -18,7 +18,7 @@
 #include <linux/delay.h>
 #include <linux/acpi.h>
 #include <linux/slab.h>
-#include <asm/io.h>
+#include <linux/io.h>
 
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR ("Vojtech Pavlik <vojtech@suse.cz>");

drivers/i2c/busses/i2c-at91.c

@@ -23,8 +23,7 @@
 #include <linux/init.h>
 #include <linux/clk.h>
 #include <linux/platform_device.h>
-
-#include <asm/io.h>
+#include <linux/io.h>
 
 #include <mach/at91_twi.h>
 #include <mach/board.h>

drivers/i2c/busses/i2c-elektor.c

@@ -37,8 +37,8 @@
 #include <linux/isa.h>
 #include <linux/i2c.h>
 #include <linux/i2c-algo-pcf.h>
+#include <linux/io.h>
 
-#include <asm/io.h>
 #include <asm/irq.h>
 
 #include "../algos/i2c-algo-pcf.h"

drivers/i2c/busses/i2c-hydra.c

@@ -28,7 +28,7 @@
 #include <linux/i2c.h>
 #include <linux/i2c-algo-bit.h>
 #include <linux/init.h>
-#include <asm/io.h>
+#include <linux/io.h>
 #include <asm/hydra.h>
 
 

drivers/i2c/busses/i2c-ibm_iic.c

@@ -39,7 +39,7 @@
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <asm/irq.h>
-#include <asm/io.h>
+#include <linux/io.h>
 #include <linux/i2c.h>
 #include <linux/i2c-id.h>
 #include <linux/of_platform.h>

drivers/i2c/busses/i2c-iop3xx.c

@@ -38,8 +38,7 @@
 #include <linux/errno.h>
 #include <linux/platform_device.h>
 #include <linux/i2c.h>
-
-#include <asm/io.h>
+#include <linux/io.h>
 
 #include "i2c-iop3xx.h"
 

drivers/i2c/busses/i2c-mv64xxx.c

@@ -17,8 +17,7 @@
 #include <linux/interrupt.h>
 #include <linux/mv643xx_i2c.h>
 #include <linux/platform_device.h>
-
-#include <asm/io.h>
+#include <linux/io.h>
 
 /* Register defines */
 #define	MV64XXX_I2C_REG_SLAVE_ADDR			0x00

drivers/i2c/busses/i2c-nforce2.c

@@ -57,7 +57,7 @@
 #include <linux/dmi.h>
 #include <linux/acpi.h>
 #include <linux/slab.h>
-#include <asm/io.h>
+#include <linux/io.h>
 
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR ("Hans-Frieder Vogt <hfvogt@gmx.net>");

drivers/i2c/busses/i2c-ocores.c

@@ -19,7 +19,7 @@
 #include <linux/wait.h>
 #include <linux/i2c-ocores.h>
 #include <linux/slab.h>
-#include <asm/io.h>
+#include <linux/io.h>
 
 struct ocores_i2c {
 	void __iomem *base;

drivers/i2c/busses/i2c-parport-light.c

@@ -33,7 +33,7 @@
 #include <linux/i2c.h>
 #include <linux/i2c-algo-bit.h>
 #include <linux/i2c-smbus.h>
-#include <asm/io.h>
+#include <linux/io.h>
 #include "i2c-parport.h"
 
 #define DEFAULT_BASE 0x378

drivers/i2c/busses/i2c-pasemi.c

@@ -25,7 +25,7 @@
 #include <linux/i2c.h>
 #include <linux/delay.h>
 #include <linux/slab.h>
-#include <asm/io.h>
+#include <linux/io.h>
 
 static struct pci_driver pasemi_smb_driver;
 

drivers/i2c/busses/i2c-pca-isa.c

@@ -30,8 +30,8 @@
 #include <linux/isa.h>
 #include <linux/i2c.h>
 #include <linux/i2c-algo-pca.h>
+#include <linux/io.h>
 
-#include <asm/io.h>
 #include <asm/irq.h>
 
 #define DRIVER "i2c-pca-isa"

drivers/i2c/busses/i2c-pca-platform.c

@@ -23,9 +23,9 @@
 #include <linux/i2c-algo-pca.h>
 #include <linux/i2c-pca-platform.h>
 #include <linux/gpio.h>
+#include <linux/io.h>
 
 #include <asm/irq.h>
-#include <asm/io.h>
 
 struct i2c_pca_pf_data {
 	void __iomem			*reg_base;

drivers/i2c/busses/i2c-piix4.c

@@ -39,7 +39,7 @@
 #include <linux/init.h>
 #include <linux/dmi.h>
 #include <linux/acpi.h>
-#include <asm/io.h>
+#include <linux/io.h>
 
 
 /* PIIX4 SMBus address offsets */

drivers/i2c/busses/i2c-pmcmsp.c

@@ -33,7 +33,7 @@
 #include <linux/completion.h>
 #include <linux/mutex.h>
 #include <linux/delay.h>
-#include <asm/io.h>
+#include <linux/io.h>
 
 #define DRV_NAME	"pmcmsptwi"
 

drivers/i2c/busses/i2c-pxa.c

@@ -34,9 +34,9 @@
 #include <linux/err.h>
 #include <linux/clk.h>
 #include <linux/slab.h>
+#include <linux/io.h>
 
 #include <asm/irq.h>
-#include <asm/io.h>
 #include <plat/i2c.h>
 
 /*

drivers/i2c/busses/i2c-s3c2410.c

@@ -35,9 +35,9 @@
 #include <linux/clk.h>
 #include <linux/cpufreq.h>
 #include <linux/slab.h>
+#include <linux/io.h>
 
 #include <asm/irq.h>
-#include <asm/io.h>
 
 #include <plat/regs-iic.h>
 #include <plat/iic.h>

drivers/i2c/busses/i2c-s6000.c

@@ -36,8 +36,8 @@
 #include <linux/completion.h>
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>
+#include <linux/io.h>
 
-#include <asm/io.h>
 #include "i2c-s6000.h"
 
 #define DRV_NAME "i2c-s6000"

drivers/i2c/busses/i2c-sh7760.c

@@ -16,10 +16,10 @@
 #include <linux/ioport.h>
 #include <linux/platform_device.h>
 #include <linux/slab.h>
+#include <linux/io.h>
 
 #include <asm/clock.h>
 #include <asm/i2c-sh7760.h>
-#include <asm/io.h>
 
 /* register offsets */
 #define I2CSCR		0x0		/* slave ctrl		*/

drivers/i2c/busses/i2c-sibyte.c

@@ -22,7 +22,7 @@
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/i2c.h>
-#include <asm/io.h>
+#include <linux/io.h>
 #include <asm/sibyte/sb1250_regs.h>
 #include <asm/sibyte/sb1250_smbus.h>
 

drivers/i2c/busses/i2c-simtec.c

@@ -24,12 +24,11 @@
 #include <linux/delay.h>
 #include <linux/platform_device.h>
 #include <linux/slab.h>
+#include <linux/io.h>
 
 #include <linux/i2c.h>
 #include <linux/i2c-algo-bit.h>
 
-#include <asm/io.h>
-
 struct simtec_i2c_data {
 	struct resource		*ioarea;
 	void __iomem		*reg;

drivers/i2c/busses/i2c-sis5595.c

@@ -61,7 +61,7 @@
 #include <linux/init.h>
 #include <linux/i2c.h>
 #include <linux/acpi.h>
-#include <asm/io.h>
+#include <linux/io.h>
 
 static int blacklist[] = {
 	PCI_DEVICE_ID_SI_540,

drivers/i2c/busses/i2c-sis630.c

@@ -53,7 +53,7 @@
 #include <linux/init.h>
 #include <linux/i2c.h>
 #include <linux/acpi.h>
-#include <asm/io.h>
+#include <linux/io.h>
 
 /* SIS630 SMBus registers */
 #define SMB_STS			0x80	/* status */

drivers/i2c/busses/i2c-sis96x.c

@@ -38,7 +38,7 @@
 #include <linux/i2c.h>
 #include <linux/init.h>
 #include <linux/acpi.h>
-#include <asm/io.h>
+#include <linux/io.h>
 
 /* base address register in PCI config space */
 #define SIS96x_BAR 0x04

drivers/i2c/busses/i2c-versatile.c

@@ -15,8 +15,7 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/slab.h>
-
-#include <asm/io.h>
+#include <linux/io.h>
 
 #define I2C_CONTROL	0x00
 #define I2C_CONTROLS	0x00

drivers/i2c/busses/i2c-via.c

@@ -25,7 +25,7 @@
 #include <linux/init.h>
 #include <linux/i2c.h>
 #include <linux/i2c-algo-bit.h>
-#include <asm/io.h>
+#include <linux/io.h>
 
 /* Power management registers */
 #define PM_CFG_REVID	0x08	/* silicon revision code */

drivers/i2c/busses/i2c-viapro.c

@@ -51,7 +51,7 @@
 #include <linux/i2c.h>
 #include <linux/init.h>
 #include <linux/acpi.h>
-#include <asm/io.h>
+#include <linux/io.h>
 
 static struct pci_dev *vt596_pdev;
 

drivers/i2c/busses/scx200_acb.c

@@ -32,7 +32,7 @@
 #include <linux/delay.h>
 #include <linux/mutex.h>
 #include <linux/slab.h>
-#include <asm/io.h>
+#include <linux/io.h>
 
 #include <linux/scx200.h>
 

drivers/i2c/busses/scx200_i2c.c

@@ -27,7 +27,7 @@
 #include <linux/init.h>
 #include <linux/i2c.h>
 #include <linux/i2c-algo-bit.h>
-#include <asm/io.h>
+#include <linux/io.h>
 
 #include <linux/scx200_gpio.h>