pseries: Move plpar_wrapper.h to powerpc common include/asm location.

As a part of pseries_idle backend driver cleanup to make
the code common to both pseries and powernv platforms, it
is necessary to move the backend-driver code to drivers/cpuidle.

As a pre-requisite for that, it is essential to move plpar_wrapper.h
to include/asm.

Signed-off-by: Deepthi Dharwar <deepthi@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

arch/powerpc/platforms/pseries/plpar_wrappers.h → arch/powerpc/include/asm/plpar_wrappers.h

@@ -1,5 +1,5 @@
-#ifndef _PSERIES_PLPAR_WRAPPERS_H
-#define _PSERIES_PLPAR_WRAPPERS_H
+#ifndef _ASM_POWERPC_PLPAR_WRAPPERS_H
+#define _ASM_POWERPC_PLPAR_WRAPPERS_H
 
 #include <linux/string.h>
 #include <linux/irqflags.h>
@@ -297,4 +297,4 @@ static inline long plapr_set_watchpoint0(unsigned long dawr0, unsigned long dawr
 	return plpar_set_mode(0, 2, dawr0, dawrx0);
 }
 
-#endif /* _PSERIES_PLPAR_WRAPPERS_H */
+#endif /* _ASM_POWERPC_PLPAR_WRAPPERS_H */

arch/powerpc/platforms/pseries/cmm.c

@@ -40,8 +40,7 @@
 #include <asm/pgalloc.h>
 #include <asm/uaccess.h>
 #include <linux/memory.h>
-
-#include "plpar_wrappers.h"
+#include <asm/plpar_wrappers.h>
 
 #define CMM_DRIVER_VERSION	"1.0.0"
 #define CMM_DEFAULT_DELAY	1

arch/powerpc/platforms/pseries/dtl.c

@@ -29,8 +29,7 @@
 #include <asm/firmware.h>
 #include <asm/lppaca.h>
 #include <asm/debug.h>
-
-#include "plpar_wrappers.h"
+#include <asm/plpar_wrappers.h>
 
 struct dtl {
 	struct dtl_entry	*buf;

arch/powerpc/platforms/pseries/hotplug-cpu.c

@@ -30,7 +30,8 @@
 #include <asm/machdep.h>
 #include <asm/vdso_datapage.h>
 #include <asm/xics.h>
-#include "plpar_wrappers.h"
+#include <asm/plpar_wrappers.h>
+
 #include "offline_states.h"
 
 /* This version can't take the spinlock, because it never returns */

arch/powerpc/platforms/pseries/hvconsole.c

@@ -28,7 +28,7 @@
 #include <linux/errno.h>
 #include <asm/hvcall.h>
 #include <asm/hvconsole.h>
-#include "plpar_wrappers.h"
+#include <asm/plpar_wrappers.h>
 
 /**
  * hvc_get_chars - retrieve characters from firmware for denoted vterm adatper

arch/powerpc/platforms/pseries/iommu.c

@@ -48,8 +48,7 @@
 #include <asm/ppc-pci.h>
 #include <asm/udbg.h>
 #include <asm/mmzone.h>
-
-#include "plpar_wrappers.h"
+#include <asm/plpar_wrappers.h>
 
 
 static void tce_invalidate_pSeries_sw(struct iommu_table *tbl,

arch/powerpc/platforms/pseries/kexec.c

@@ -17,9 +17,9 @@
 #include <asm/mpic.h>
 #include <asm/xics.h>
 #include <asm/smp.h>
+#include <asm/plpar_wrappers.h>
 
 #include "pseries.h"
-#include "plpar_wrappers.h"
 
 static void pseries_kexec_cpu_down(int crash_shutdown, int secondary)
 {

arch/powerpc/platforms/pseries/lpar.c

@@ -41,8 +41,8 @@
 #include <asm/smp.h>
 #include <asm/trace.h>
 #include <asm/firmware.h>
+#include <asm/plpar_wrappers.h>
 
-#include "plpar_wrappers.h"
 #include "pseries.h"
 
 /* Flag bits for H_BULK_REMOVE */

arch/powerpc/platforms/pseries/processor_idle.c

@@ -18,8 +18,7 @@
 #include <asm/machdep.h>
 #include <asm/firmware.h>
 #include <asm/runlatch.h>
-
-#include "plpar_wrappers.h"
+#include <asm/plpar_wrappers.h>
 
 struct cpuidle_driver pseries_idle_driver = {
 	.name             = "pseries_idle",

arch/powerpc/platforms/pseries/setup.c

@@ -66,8 +66,8 @@
 #include <asm/firmware.h>
 #include <asm/eeh.h>
 #include <asm/reg.h>
+#include <asm/plpar_wrappers.h>
 
-#include "plpar_wrappers.h"
 #include "pseries.h"
 
 int CMO_PrPSP = -1;

arch/powerpc/platforms/pseries/smp.c

@@ -43,8 +43,8 @@
 #include <asm/cputhreads.h>
 #include <asm/xics.h>
 #include <asm/dbell.h>
+#include <asm/plpar_wrappers.h>
 
-#include "plpar_wrappers.h"
 #include "pseries.h"
 #include "offline_states.h"