staging: comedi: Fix typo in comedi

Correct spelling typos in staging/comedi

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/staging/comedi/drivers/addi-data/APCI1710_Ssi.c

@@ -704,9 +704,9 @@ static int i_APCI1710_InsnReadSSIValue(struct comedi_device *dev,
 |                                        unsigned char *_   pb_ChannelStatus)          |
 +----------------------------------------------------------------------------+
 | Task              :
-					(0) Set the digital output from selected SSI moule         |
+					(0) Set the digital output from selected SSI module         |
 |                     (b_ModuleNbr) ON
-                    (1) Set the digital output from selected SSI moule         |
+                    (1) Set the digital output from selected SSI module         |
 |                     (b_ModuleNbr) OFF
 					(2)Read the status from selected SSI digital input        |
 |                     (b_InputChannel)

drivers/staging/comedi/drivers/adv_pci1710.c

@@ -312,7 +312,7 @@ struct pci1710_private {
 	unsigned int ai_et_CntrlReg;
 	unsigned int ai_et_MuxVal;
 	unsigned int ai_et_div1, ai_et_div2;
-	unsigned int act_chanlist[32];	/*  list of scaned channel */
+	unsigned int act_chanlist[32];	/*  list of scanned channel */
 	unsigned char act_chanlist_len;	/*  len of scanlist */
 	unsigned char act_chanlist_pos;	/*  actual position in MUX list */
 	unsigned char da_ranges;	/*  copy of D/A outpit range register */
@@ -339,7 +339,7 @@ static const unsigned int muxonechan[] = {
 
 /*
 ==============================================================================
- Check if channel list from user is builded correctly
+ Check if channel list from user is built correctly
  If it's ok, then program scan/gain logic.
  This works for all cards.
 */

drivers/staging/comedi/drivers/cb_pcidas64.c

@@ -1529,7 +1529,7 @@ static int alloc_and_init_dma_members(struct comedi_device *dev)
 	struct pcidas64_private *devpriv = dev->private;
 	int i;
 
-	/*  alocate pci dma buffers */
+	/*  allocate pci dma buffers */
 	for (i = 0; i < ai_dma_ring_count(thisboard); i++) {
 		devpriv->ai_buffer[i] =
 			pci_alloc_consistent(pcidev, DMA_BUFFER_SIZE,

drivers/staging/comedi/drivers/icp_multi.c

@@ -120,7 +120,7 @@ struct icp_multi_private {
 	unsigned int DacCmdStatus;	/*  DAC Command/Status register */
 	unsigned int IntEnable;	/*  Interrupt Enable register */
 	unsigned int IntStatus;	/*  Interrupt Status register */
-	unsigned int act_chanlist[32];	/*  list of scaned channel */
+	unsigned int act_chanlist[32];	/*  list of scanned channel */
 	unsigned char act_chanlist_len;	/*  len of scanlist */
 	unsigned char act_chanlist_pos;	/*  actual position in MUX list */
 	unsigned int *ai_chanlist;	/*  actaul chanlist */

drivers/staging/comedi/drivers/me_daq.c

@@ -428,7 +428,7 @@ static int me2600_xilinx_download(struct comedi_device *dev,
 
 	/*
 	 * Loop for writing firmware byte by byte to xilinx
-	 * Firmware data start at offfset 16
+	 * Firmware data start at offset 16
 	 */
 	for (i = 0; i < file_length; i++)
 		writeb((data[16 + i] & 0xff),

drivers/staging/comedi/drivers/pcl816.c

@@ -837,7 +837,7 @@ start_pacer(struct comedi_device *dev, int mode, unsigned int divisor1,
 
 /*
 ==============================================================================
- Check if channel list from user is builded correctly
+ Check if channel list from user is built correctly
  If it's ok, then return non-zero length of repeated segment of channel list
 */
 static int

drivers/staging/comedi/drivers/usbdux.c

@@ -56,7 +56,7 @@ sampling rate. If you sample two channels you get 4kHz and so on.
  *       functions firmware upload is by fxload and no longer by comedi (due to
  *       enumeration)
  * 0.97: USB IDs received, adjusted table
- * 0.98: SMP, locking, memroy alloc: moved all usb memory alloc
+ * 0.98: SMP, locking, memory alloc: moved all usb memory alloc
  *       to the usb subsystem and moved all comedi related memory
  *       alloc to comedi.
  *       | kernel | registration | usbdux-usb | usbdux-comedi | comedi |

drivers/staging/comedi/drivers/usbduxsigma.c

@@ -1369,7 +1369,7 @@ static int usbdux_getstatusinfo(struct comedi_device *dev, int chan)
 
 	/* 32 bits big endian from the A/D converter */
 	one = be32_to_cpu(*((int32_t *)((this_usbduxsub->insnBuffer)+1)));
-	/* mask out the staus byte */
+	/* mask out the status byte */
 	one = one & 0x00ffffff;
 	one = one ^ 0x00800000;