V4L/DVB (3366): Kworld ATSC110: initialize the tuner for analog mode on module load

- Enable the tuv1236 tuner on the Kworld-ATSC110 card so that the
  tuner can be identified when tuners.ko loads.
- With this change it is no longer necessary to remove and reload
  the tuner module in order to get the tuv1236 identified.
- This code was copied from the ATI HDTV Wonder init routine (in cx88-cards.c)
  which also uses the TUV1236D.

Signed-off-by: Curt Meyers <cmeyers@boilerbots.com>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

drivers/media/video/saa7134/saa7134-cards.c

@@ -3549,6 +3549,18 @@ int saa7134_board_init2(struct saa7134_dev *dev)
 		i2c_transfer(&dev->i2c_adap, &msg, 1);
 		}
 		break;
+	case SAA7134_BOARD_KWORLD_ATSC110:
+		{
+			/* enable tuner */
+			int i;
+			u8 buffer [] = { 0x10,0x12,0x13,0x04,0x16,0x00,0x14,0x04,0x017,0x00 };
+			dev->i2c_client.addr = 0x0a;
+			for (i = 0; i < 5; i++)
+				if (2 != i2c_master_send(&dev->i2c_client,&buffer[i*2],2))
+					printk(KERN_WARNING "%s: Unable to enable tuner(%i).\n",
+					       dev->name, i);
+		}
+		break;
 	}
 	return 0;
 }