[PATCH] S2io: Code cleanup

Hi,
We are submitting a series of 13 patches to support our Xframe I and
Xframe II line of products. The patches can be categorized as follows:

Patches 1-8 : Changes applicable to both Xframe I and II
Patches 9-11: Xframe II specific features
Patch 12: Addresses issues found during testing cycle.
Patch 13: Incorpoates mostly the review comments from community
	and some last moment bug fixes.

Please review the patches and let us know your comments.

Starting with patch 1 below.
This patch involves cosmetic changes(tabs and indentation,
regrouping of transmit and receive data structures, typecasting,
code cleanup).

Signed-off-by: Ravinandan Arakali <ravinandan.arakali@neterion.com>
Signed-off-by: Raghavendra Koushik <raghavendra.koushik@neterion.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

drivers/net/s2io-regs.h

@@ -77,19 +77,18 @@ typedef struct _XENA_dev_config {
 #define ADAPTER_ECC_EN                     BIT(55)
 
 	u64 serr_source;
-#define SERR_SOURCE_PIC					BIT(0)
-#define SERR_SOURCE_TXDMA				BIT(1)
-#define SERR_SOURCE_RXDMA				BIT(2)
+#define SERR_SOURCE_PIC			BIT(0)
+#define SERR_SOURCE_TXDMA		BIT(1)
+#define SERR_SOURCE_RXDMA		BIT(2)
 #define SERR_SOURCE_MAC                 BIT(3)
 #define SERR_SOURCE_MC                  BIT(4)
 #define SERR_SOURCE_XGXS                BIT(5)
-#define	SERR_SOURCE_ANY					(SERR_SOURCE_PIC		| \
-										SERR_SOURCE_TXDMA	| \
-										SERR_SOURCE_RXDMA	| \
-										SERR_SOURCE_MAC		| \
-										SERR_SOURCE_MC      | \
-										SERR_SOURCE_XGXS)
-
+#define	SERR_SOURCE_ANY			(SERR_SOURCE_PIC	| \
+					SERR_SOURCE_TXDMA	| \
+					SERR_SOURCE_RXDMA	| \
+					SERR_SOURCE_MAC		| \
+					SERR_SOURCE_MC		| \
+					SERR_SOURCE_XGXS)
 
 	u8 unused_0[0x800 - 0x120];
 

drivers/net/s2io.h

@@ -31,6 +31,9 @@
 #define SUCCESS 0
 #define FAILURE -1
 
+/* Maximum time to flicker LED when asked to identify NIC using ethtool */
+#define MAX_FLICKER_TIME	60000 /* 60 Secs */
+
 /* Maximum outstanding splits to be configured into xena. */
 typedef enum xena_max_outstanding_splits {
 	XENA_ONE_SPLIT_TRANSACTION = 0,
@@ -45,10 +48,10 @@ typedef enum xena_max_outstanding_splits {
 #define XENA_MAX_OUTSTANDING_SPLITS(n) (n << 4)
 
 /*  OS concerned variables and constants */
-#define WATCH_DOG_TIMEOUT   	5*HZ
-#define EFILL       			0x1234
-#define ALIGN_SIZE  			127
-#define	PCIX_COMMAND_REGISTER	0x62
+#define WATCH_DOG_TIMEOUT		15*HZ
+#define EFILL				0x1234
+#define ALIGN_SIZE			127
+#define	PCIX_COMMAND_REGISTER		0x62
 
 /*
  * Debug related variables.
@@ -61,7 +64,7 @@ typedef enum xena_max_outstanding_splits {
 #define	INTR_DBG	4
 
 /* Global variable that defines the present debug level of the driver. */
-static int debug_level = ERR_DBG;	/* Default level. */
+int debug_level = ERR_DBG;	/* Default level. */
 
 /* DEBUG message print. */
 #define DBG_PRINT(dbg_level, args...)  if(!(debug_level<dbg_level)) printk(args)
@@ -71,6 +74,12 @@ static int debug_level = ERR_DBG;	/* Default level. */
 #define L4_CKSUM_OK 0xFFFF
 #define S2IO_JUMBO_SIZE 9600
 
+/* Driver statistics maintained by driver */
+typedef struct {
+	unsigned long long single_ecc_errs;
+	unsigned long long double_ecc_errs;
+} swStat_t;
+
 /* The statistics block of Xena */
 typedef struct stat_block {
 /* Tx MAC statistics counters. */
@@ -188,10 +197,26 @@ typedef struct stat_block {
 	u32 txf_rd_cnt;
 } StatInfo_t;
 
-/* Structures representing different init time configuration
+/*
+ * Structures representing different init time configuration
  * parameters of the NIC.
  */
 
+#define MAX_TX_FIFOS 8
+#define MAX_RX_RINGS 8
+
+/* FIFO mappings for all possible number of fifos configured */
+int fifo_map[][MAX_TX_FIFOS] = {
+	{0, 0, 0, 0, 0, 0, 0, 0},
+	{0, 0, 0, 0, 1, 1, 1, 1},
+	{0, 0, 0, 1, 1, 1, 2, 2},
+	{0, 0, 1, 1, 2, 2, 3, 3},
+	{0, 0, 1, 1, 2, 2, 3, 4},
+	{0, 0, 1, 1, 2, 3, 4, 5},
+	{0, 0, 1, 2, 3, 4, 5, 6},
+	{0, 1, 2, 3, 4, 5, 6, 7},
+};
+
 /* Maintains Per FIFO related information. */
 typedef struct tx_fifo_config {
 #define	MAX_AVAILABLE_TXDS	8192
@@ -237,14 +262,14 @@ typedef struct rx_ring_config {
 #define NO_SNOOP_RXD_BUFFER         0x02
 } rx_ring_config_t;
 
-/* This structure provides contains values of the tunable parameters 
- * of the H/W 
+/* This structure provides contains values of the tunable parameters
+ * of the H/W
  */
 struct config_param {
 /* Tx Side */
 	u32 tx_fifo_num;	/*Number of Tx FIFOs */
-#define MAX_TX_FIFOS 8
 
+	u8 fifo_mapping[MAX_TX_FIFOS];
 	tx_fifo_config_t tx_cfg[MAX_TX_FIFOS];	/*Per-Tx FIFO config */
 	u32 max_txds;		/*Max no. of Tx buffer descriptor per TxDL */
 	u64 tx_intr_type;
@@ -252,7 +277,6 @@ struct config_param {
 
 /* Rx Side */
 	u32 rx_ring_num;	/*Number of receive rings */
-#define MAX_RX_RINGS 8
 #define MAX_RX_BLOCKS_PER_RING  150
 
 	rx_ring_config_t rx_cfg[MAX_RX_RINGS];	/*Per-Rx Ring config */
@@ -269,6 +293,7 @@ struct config_param {
 #define MAX_PYLD_JUMBO              9600
 #define MAX_MTU_JUMBO               (MAX_PYLD_JUMBO+18)
 #define MAX_MTU_JUMBO_VLAN          (MAX_PYLD_JUMBO+22)
+	u16 bus_speed;
 };
 
 /* Structure representing MAC Addrs */
@@ -277,7 +302,7 @@ typedef struct mac_addr {
 } macaddr_t;
 
 /* Structure that represent every FIFO element in the BAR1
- * Address location. 
+ * Address location.
  */
 typedef struct _TxFIFO_element {
 	u64 TxDL_Pointer;
@@ -339,6 +364,7 @@ typedef struct _RxD_t {
 #define RXD_FRAME_PROTO         vBIT(0xFFFF,24,8)
 #define RXD_FRAME_PROTO_IPV4    BIT(27)
 #define RXD_FRAME_PROTO_IPV6    BIT(28)
+#define RXD_FRAME_IP_FRAG	BIT(29)
 #define RXD_FRAME_PROTO_TCP     BIT(30)
 #define RXD_FRAME_PROTO_UDP     BIT(31)
 #define TCP_OR_UDP_FRAME        (RXD_FRAME_PROTO_TCP | RXD_FRAME_PROTO_UDP)
@@ -347,10 +373,10 @@ typedef struct _RxD_t {
 
 	u64 Control_2;
 #ifndef CONFIG_2BUFF_MODE
-#define MASK_BUFFER0_SIZE       vBIT(0xFFFF,0,16)
-#define SET_BUFFER0_SIZE(val)   vBIT(val,0,16)
+#define MASK_BUFFER0_SIZE       vBIT(0x3FFF,2,14)
+#define SET_BUFFER0_SIZE(val)   vBIT(val,2,14)
 #else
-#define MASK_BUFFER0_SIZE       vBIT(0xFF,0,16)
+#define MASK_BUFFER0_SIZE       vBIT(0xFF,2,14)
 #define MASK_BUFFER1_SIZE       vBIT(0xFFFF,16,16)
 #define MASK_BUFFER2_SIZE       vBIT(0xFFFF,32,16)
 #define SET_BUFFER0_SIZE(val)   vBIT(val,8,8)
@@ -363,7 +389,7 @@ typedef struct _RxD_t {
 #define SET_NUM_TAG(val)       vBIT(val,16,32)
 
 #ifndef CONFIG_2BUFF_MODE
-#define RXD_GET_BUFFER0_SIZE(Control_2) (u64)((Control_2 & vBIT(0xFFFF,0,16)))
+#define RXD_GET_BUFFER0_SIZE(Control_2) (u64)((Control_2 & vBIT(0x3FFF,2,14)))
 #else
 #define RXD_GET_BUFFER0_SIZE(Control_2) (u8)((Control_2 & MASK_BUFFER0_SIZE) \
 							>> 48)
@@ -382,7 +408,7 @@ typedef struct _RxD_t {
 #endif
 } RxD_t;
 
-/* Structure that represents the Rx descriptor block which contains 
+/* Structure that represents the Rx descriptor block which contains
  * 128 Rx descriptors.
  */
 #ifndef CONFIG_2BUFF_MODE
@@ -392,11 +418,11 @@ typedef struct _RxD_block {
 
 	u64 reserved_0;
 #define END_OF_BLOCK    0xFEFFFFFFFFFFFFFFULL
-	u64 reserved_1;		/* 0xFEFFFFFFFFFFFFFF to mark last 
+	u64 reserved_1;		/* 0xFEFFFFFFFFFFFFFF to mark last
 				 * Rxd in this blk */
 	u64 reserved_2_pNext_RxD_block;	/* Logical ptr to next */
 	u64 pNext_RxD_Blk_physical;	/* Buff0_ptr.In a 32 bit arch
-					 * the upper 32 bits should 
+					 * the upper 32 bits should
 					 * be 0 */
 } RxD_block_t;
 #else
@@ -405,13 +431,13 @@ typedef struct _RxD_block {
 	RxD_t rxd[MAX_RXDS_PER_BLOCK];
 
 #define END_OF_BLOCK    0xFEFFFFFFFFFFFFFFULL
-	u64 reserved_1;		/* 0xFEFFFFFFFFFFFFFF to mark last Rxd 
+	u64 reserved_1;		/* 0xFEFFFFFFFFFFFFFF to mark last Rxd
 				 * in this blk */
 	u64 pNext_RxD_Blk_physical;	/* Phy ponter to next blk. */
 } RxD_block_t;
 #define SIZE_OF_BLOCK	4096
 
-/* Structure to hold virtual addresses of Buf0 and Buf1 in 
+/* Structure to hold virtual addresses of Buf0 and Buf1 in
  * 2buf mode. */
 typedef struct bufAdd {
 	void *ba_0_org;
@@ -423,8 +449,8 @@ typedef struct bufAdd {
 
 /* Structure which stores all the MAC control parameters */
 
-/* This structure stores the offset of the RxD in the ring 
- * from which the Rx Interrupt processor can start picking 
+/* This structure stores the offset of the RxD in the ring
+ * from which the Rx Interrupt processor can start picking
  * up the RxDs for processing.
  */
 typedef struct _rx_curr_get_info_t {
@@ -436,7 +462,7 @@ typedef struct _rx_curr_get_info_t {
 typedef rx_curr_get_info_t rx_curr_put_info_t;
 
 /* This structure stores the offset of the TxDl in the FIFO
- * from which the Tx Interrupt processor can start picking 
+ * from which the Tx Interrupt processor can start picking
  * up the TxDLs for send complete interrupt processing.
  */
 typedef struct {
@@ -446,32 +472,96 @@ typedef struct {
 
 typedef tx_curr_get_info_t tx_curr_put_info_t;
 
-/* Infomation related to the Tx and Rx FIFOs and Rings of Xena
- * is maintained in this structure.
- */
-typedef struct mac_info {
-/* rx side stuff */
-	/* Put pointer info which indictes which RxD has to be replenished 
+/* Structure that holds the Phy and virt addresses of the Blocks */
+typedef struct rx_block_info {
+	RxD_t *block_virt_addr;
+	dma_addr_t block_dma_addr;
+} rx_block_info_t;
+
+/* pre declaration of the nic structure */
+typedef struct s2io_nic nic_t;
+
+/* Ring specific structure */
+typedef struct ring_info {
+	/* The ring number */
+	int ring_no;
+
+	/*
+	 *  Place holders for the virtual and physical addresses of
+	 *  all the Rx Blocks
+	 */
+	rx_block_info_t rx_blocks[MAX_RX_BLOCKS_PER_RING];
+	int block_count;
+	int pkt_cnt;
+
+	/*
+	 * Put pointer info which indictes which RxD has to be replenished
 	 * with a new buffer.
 	 */
-	rx_curr_put_info_t rx_curr_put_info[MAX_RX_RINGS];
+	rx_curr_put_info_t rx_curr_put_info;
 
-	/* Get pointer info which indictes which is the last RxD that was 
+	/*
+	 * Get pointer info which indictes which is the last RxD that was
 	 * processed by the driver.
 	 */
-	rx_curr_get_info_t rx_curr_get_info[MAX_RX_RINGS];
+	rx_curr_get_info_t rx_curr_get_info;
 
-	u16 rmac_pause_time;
-	u16 mc_pause_threshold_q0q3;
-	u16 mc_pause_threshold_q4q7;
+#ifndef CONFIG_S2IO_NAPI
+	/* Index to the absolute position of the put pointer of Rx ring */
+	int put_pos;
+#endif
+
+#ifdef CONFIG_2BUFF_MODE
+	/* Buffer Address store. */
+	buffAdd_t **ba;
+#endif
+	nic_t *nic;
+} ring_info_t;
 
+/* Fifo specific structure */
+typedef struct fifo_info {
+	/* FIFO number */
+	int fifo_no;
+
+	/* Maximum TxDs per TxDL */
+	int max_txds;
+
+	/* Place holder of all the TX List's Phy and Virt addresses. */
+	list_info_hold_t *list_info;
+
+	/*
+	 * Current offset within the tx FIFO where driver would write
+	 * new Tx frame
+	 */
+	tx_curr_put_info_t tx_curr_put_info;
+
+	/*
+	 * Current offset within tx FIFO from where the driver would start freeing
+	 * the buffers
+	 */
+	tx_curr_get_info_t tx_curr_get_info;
+
+	nic_t *nic;
+}fifo_info_t;
+
+/* Infomation related to the Tx and Rx FIFOs and Rings of Xena
+ * is maintained in this structure.
+ */
+typedef struct mac_info {
 /* tx side stuff */
 	/* logical pointer of start of each Tx FIFO */
 	TxFIFO_element_t __iomem *tx_FIFO_start[MAX_TX_FIFOS];
 
-/* Current offset within tx_FIFO_start, where driver would write new Tx frame*/
-	tx_curr_put_info_t tx_curr_put_info[MAX_TX_FIFOS];
-	tx_curr_get_info_t tx_curr_get_info[MAX_TX_FIFOS];
+	/* Fifo specific structure */
+	fifo_info_t fifos[MAX_TX_FIFOS];
+
+/* rx side stuff */
+	/* Ring specific structure */
+	ring_info_t rings[MAX_RX_RINGS];
+
+	u16 rmac_pause_time;
+	u16 mc_pause_threshold_q0q3;
+	u16 mc_pause_threshold_q4q7;
 
 	void *stats_mem;	/* orignal pointer to allocated mem */
 	dma_addr_t stats_mem_phy;	/* Physical address of the stat block */
@@ -485,12 +575,6 @@ typedef struct {
 	int usage_cnt;
 } usr_addr_t;
 
-/* Structure that holds the Phy and virt addresses of the Blocks */
-typedef struct rx_block_info {
-	RxD_t *block_virt_addr;
-	dma_addr_t block_dma_addr;
-} rx_block_info_t;
-
 /* Default Tunable parameters of the NIC. */
 #define DEFAULT_FIFO_LEN 4096
 #define SMALL_RXD_CNT	30 * (MAX_RXDS_PER_BLOCK+1)
@@ -499,7 +583,20 @@ typedef struct rx_block_info {
 #define LARGE_BLK_CNT	100
 
 /* Structure representing one instance of the NIC */
-typedef struct s2io_nic {
+struct s2io_nic {
+#ifdef CONFIG_S2IO_NAPI
+	/*
+	 * Count of packets to be processed in a given iteration, it will be indicated
+	 * by the quota field of the device structure when NAPI is enabled.
+	 */
+	int pkts_to_process;
+#endif
+	struct net_device *dev;
+	mac_info_t mac_control;
+	struct config_param config;
+	struct pci_dev *pdev;
+	void __iomem *bar0;
+	void __iomem *bar1;
 #define MAX_MAC_SUPPORTED   16
 #define MAX_SUPPORTED_MULTICASTS MAX_MAC_SUPPORTED
 
@@ -507,33 +604,17 @@ typedef struct s2io_nic {
 	macaddr_t pre_mac_addr[MAX_MAC_SUPPORTED];
 
 	struct net_device_stats stats;
-	void __iomem *bar0;
-	void __iomem *bar1;
-	struct config_param config;
-	mac_info_t mac_control;
 	int high_dma_flag;
 	int device_close_flag;
 	int device_enabled_once;
 
-	char name[32];
+	char name[50];
 	struct tasklet_struct task;
 	volatile unsigned long tasklet_status;
-	struct timer_list timer;
-	struct net_device *dev;
-	struct pci_dev *pdev;
 
-	u16 vendor_id;
-	u16 device_id;
-	u16 ccmd;
-	u32 cbar0_1;
-	u32 cbar0_2;
-	u32 cbar1_1;
-	u32 cbar1_2;
-	u32 cirq;
-	u8 cache_line;
-	u32 rom_expansion;
-	u16 pcix_cmd;
-	u32 irq;
+	/* Space to back up the PCI config space */
+	u32 config_space[256 / sizeof(u32)];
+
 	atomic_t rx_bufs_left[MAX_RX_RINGS];
 
 	spinlock_t tx_lock;
@@ -558,27 +639,11 @@ typedef struct s2io_nic {
 	u16 tx_err_count;
 	u16 rx_err_count;
 
-#ifndef CONFIG_S2IO_NAPI
-	/* Index to the absolute position of the put pointer of Rx ring. */
-	int put_pos[MAX_RX_RINGS];
-#endif
-
-	/*
-	 *  Place holders for the virtual and physical addresses of 
-	 *  all the Rx Blocks
-	 */
-	rx_block_info_t rx_blocks[MAX_RX_RINGS][MAX_RX_BLOCKS_PER_RING];
-	int block_count[MAX_RX_RINGS];
-	int pkt_cnt[MAX_RX_RINGS];
-
-	/* Place holder of all the TX List's Phy and Virt addresses. */
-	list_info_hold_t *list_info[MAX_TX_FIFOS];
-
 	/*  Id timer, used to blink NIC to physically identify NIC. */
 	struct timer_list id_timer;
 
 	/*  Restart timer, used to restart NIC if the device is stuck and
-	 *  a schedule task that will set the correct Link state once the 
+	 *  a schedule task that will set the correct Link state once the
 	 *  NIC's PHY has stabilized after a state change.
 	 */
 #ifdef INIT_TQUEUE
@@ -589,12 +654,12 @@ typedef struct s2io_nic {
 	struct work_struct set_link_task;
 #endif
 
-	/* Flag that can be used to turn on or turn off the Rx checksum 
+	/* Flag that can be used to turn on or turn off the Rx checksum
 	 * offload feature.
 	 */
 	int rx_csum;
 
-	/*  after blink, the adapter must be restored with original 
+	/*  after blink, the adapter must be restored with original
 	 *  values.
 	 */
 	u64 adapt_ctrl_org;
@@ -604,16 +669,12 @@ typedef struct s2io_nic {
 #define	LINK_DOWN	1
 #define	LINK_UP		2
 
-#ifdef CONFIG_2BUFF_MODE
-	/* Buffer Address store. */
-	buffAdd_t **ba[MAX_RX_RINGS];
-#endif
 	int task_flag;
 #define CARD_DOWN 1
 #define CARD_UP 2
 	atomic_t card_state;
 	volatile unsigned long link_state;
-} nic_t;
+};
 
 #define RESET_ERROR 1;
 #define CMD_ERROR   2;
@@ -622,9 +683,10 @@ typedef struct s2io_nic {
 #ifndef readq
 static inline u64 readq(void __iomem *addr)
 {
-	u64 ret = readl(addr + 4);
-	ret <<= 32;
-	ret |= readl(addr);
+	u64 ret = 0;
+	ret = readl(addr + 4);
+	(u64) ret <<= 32;
+	(u64) ret |= readl(addr);
 
 	return ret;
 }
@@ -637,10 +699,10 @@ static inline void writeq(u64 val, void __iomem *addr)
 	writel((u32) (val >> 32), (addr + 4));
 }
 
-/* In 32 bit modes, some registers have to be written in a 
+/* In 32 bit modes, some registers have to be written in a
  * particular order to expect correct hardware operation. The
- * macro SPECIAL_REG_WRITE is used to perform such ordered 
- * writes. Defines UF (Upper First) and LF (Lower First) will 
+ * macro SPECIAL_REG_WRITE is used to perform such ordered
+ * writes. Defines UF (Upper First) and LF (Lower First) will
  * be used to specify the required write order.
  */
 #define UF	1
@@ -716,6 +778,7 @@ static inline void SPECIAL_REG_WRITE(u64 val, void __iomem *addr, int order)
 #define	PCC_FB_ECC_ERR	   vBIT(0xff, 16, 8)	/* Interrupt to indicate
 						   PCC_FB_ECC Error. */
 
+#define RXD_GET_VLAN_TAG(Control_2) (u16)(Control_2 & MASK_VLAN_TAG)
 /*
  * Prototype declaration.
  */
@@ -725,36 +788,29 @@ static void __devexit s2io_rem_nic(struct pci_dev *pdev);
 static int init_shared_mem(struct s2io_nic *sp);
 static void free_shared_mem(struct s2io_nic *sp);
 static int init_nic(struct s2io_nic *nic);
-#ifndef CONFIG_S2IO_NAPI
-static void rx_intr_handler(struct s2io_nic *sp);
-#endif
-static void tx_intr_handler(struct s2io_nic *sp);
+static void rx_intr_handler(ring_info_t *ring_data);
+static void tx_intr_handler(fifo_info_t *fifo_data);
 static void alarm_intr_handler(struct s2io_nic *sp);
 
 static int s2io_starter(void);
-static void s2io_closer(void);
+void s2io_closer(void);
 static void s2io_tx_watchdog(struct net_device *dev);
 static void s2io_tasklet(unsigned long dev_addr);
 static void s2io_set_multicast(struct net_device *dev);
-#ifndef CONFIG_2BUFF_MODE
-static int rx_osm_handler(nic_t * sp, u16 len, RxD_t * rxdp, int ring_no);
-#else
-static int rx_osm_handler(nic_t * sp, RxD_t * rxdp, int ring_no,
-			  buffAdd_t * ba);
-#endif
-static void s2io_link(nic_t * sp, int link);
-static void s2io_reset(nic_t * sp);
-#ifdef CONFIG_S2IO_NAPI
+static int rx_osm_handler(ring_info_t *ring_data, RxD_t * rxdp);
+void s2io_link(nic_t * sp, int link);
+void s2io_reset(nic_t * sp);
+#if defined(CONFIG_S2IO_NAPI)
 static int s2io_poll(struct net_device *dev, int *budget);
 #endif
 static void s2io_init_pci(nic_t * sp);
-static int s2io_set_mac_addr(struct net_device *dev, u8 * addr);
+int s2io_set_mac_addr(struct net_device *dev, u8 * addr);
 static irqreturn_t s2io_isr(int irq, void *dev_id, struct pt_regs *regs);
-static int verify_xena_quiescence(u64 val64, int flag);
+static int verify_xena_quiescence(nic_t *sp, u64 val64, int flag);
 static struct ethtool_ops netdev_ethtool_ops;
 static void s2io_set_link(unsigned long data);
-static int s2io_set_swapper(nic_t * sp);
-static void s2io_card_down(nic_t * nic);
-static int s2io_card_up(nic_t * nic);
-
+int s2io_set_swapper(nic_t * sp);
+static void s2io_card_down(nic_t *nic);
+static int s2io_card_up(nic_t *nic);
+int get_xena_rev_id(struct pci_dev *pdev);
 #endif				/* _S2IO_H */