Merge branch 'samsung/devel' of git+ssh://git.linaro.org/home/arndbergmann/public_git/arm-soc into next/devel2

Documentation/ABI/testing/sysfs-class-scsi_host

@@ -0,0 +1,13 @@
+What:		/sys/class/scsi_host/hostX/isci_id
+Date:		June 2011
+Contact:	Dave Jiang <dave.jiang@intel.com>
+Description:
+		This file contains the enumerated host ID for the Intel
+		SCU controller. The Intel(R) C600 Series Chipset SATA/SAS
+		Storage Control Unit embeds up to two 4-port controllers in
+		a single PCI device.  The controllers are enumerated in order
+		which usually means the lowest number scsi_host corresponds
+		with the first controller, but this association is not
+		guaranteed.  The 'isci_id' attribute unambiguously identifies
+		the controller index: '0' for the first controller,
+		'1' for the second.

Documentation/cgroups/memory.txt

@@ -380,7 +380,7 @@ will be charged as a new owner of it.
 
 5.2 stat file
 
-5.2.1 memory.stat file includes following statistics
+memory.stat file includes following statistics
 
 # per-memory cgroup local status
 cache		- # of bytes of page cache memory.
@@ -438,89 +438,6 @@ Note:
 	 file_mapped is accounted only when the memory cgroup is owner of page
 	 cache.)
 
-5.2.2 memory.vmscan_stat
-
-memory.vmscan_stat includes statistics information for memory scanning and
-freeing, reclaiming. The statistics shows memory scanning information since
-memory cgroup creation and can be reset to 0 by writing 0 as
-
- #echo 0 > ../memory.vmscan_stat
-
-This file contains following statistics.
-
-[param]_[file_or_anon]_pages_by_[reason]_[under_heararchy]
-[param]_elapsed_ns_by_[reason]_[under_hierarchy]
-
-For example,
-
-  scanned_file_pages_by_limit indicates the number of scanned
-  file pages at vmscan.
-
-Now, 3 parameters are supported
-
-  scanned - the number of pages scanned by vmscan
-  rotated - the number of pages activated at vmscan
-  freed   - the number of pages freed by vmscan
-
-If "rotated" is high against scanned/freed, the memcg seems busy.
-
-Now, 2 reason are supported
-
-  limit - the memory cgroup's limit
-  system - global memory pressure + softlimit
-           (global memory pressure not under softlimit is not handled now)
-
-When under_hierarchy is added in the tail, the number indicates the
-total memcg scan of its children and itself.
-
-elapsed_ns is a elapsed time in nanosecond. This may include sleep time
-and not indicates CPU usage. So, please take this as just showing
-latency.
-
-Here is an example.
-
-# cat /cgroup/memory/A/memory.vmscan_stat
-scanned_pages_by_limit 9471864
-scanned_anon_pages_by_limit 6640629
-scanned_file_pages_by_limit 2831235
-rotated_pages_by_limit 4243974
-rotated_anon_pages_by_limit 3971968
-rotated_file_pages_by_limit 272006
-freed_pages_by_limit 2318492
-freed_anon_pages_by_limit 962052
-freed_file_pages_by_limit 1356440
-elapsed_ns_by_limit 351386416101
-scanned_pages_by_system 0
-scanned_anon_pages_by_system 0
-scanned_file_pages_by_system 0
-rotated_pages_by_system 0
-rotated_anon_pages_by_system 0
-rotated_file_pages_by_system 0
-freed_pages_by_system 0
-freed_anon_pages_by_system 0
-freed_file_pages_by_system 0
-elapsed_ns_by_system 0
-scanned_pages_by_limit_under_hierarchy 9471864
-scanned_anon_pages_by_limit_under_hierarchy 6640629
-scanned_file_pages_by_limit_under_hierarchy 2831235
-rotated_pages_by_limit_under_hierarchy 4243974
-rotated_anon_pages_by_limit_under_hierarchy 3971968
-rotated_file_pages_by_limit_under_hierarchy 272006
-freed_pages_by_limit_under_hierarchy 2318492
-freed_anon_pages_by_limit_under_hierarchy 962052
-freed_file_pages_by_limit_under_hierarchy 1356440
-elapsed_ns_by_limit_under_hierarchy 351386416101
-scanned_pages_by_system_under_hierarchy 0
-scanned_anon_pages_by_system_under_hierarchy 0
-scanned_file_pages_by_system_under_hierarchy 0
-rotated_pages_by_system_under_hierarchy 0
-rotated_anon_pages_by_system_under_hierarchy 0
-rotated_file_pages_by_system_under_hierarchy 0
-freed_pages_by_system_under_hierarchy 0
-freed_anon_pages_by_system_under_hierarchy 0
-freed_file_pages_by_system_under_hierarchy 0
-elapsed_ns_by_system_under_hierarchy 0
-
 5.3 swappiness
 
 Similar to /proc/sys/vm/swappiness, but affecting a hierarchy of groups only.

Documentation/hwmon/coretemp

@@ -35,13 +35,6 @@ the Out-Of-Spec bit. Following table summarizes the exported sysfs files:
 All Sysfs entries are named with their core_id (represented here by 'X').
 tempX_input	 - Core temperature (in millidegrees Celsius).
 tempX_max	 - All cooling devices should be turned on (on Core2).
-		   Initialized with IA32_THERM_INTERRUPT. When the CPU
-		   temperature reaches this temperature, an interrupt is
-		   generated and tempX_max_alarm is set.
-tempX_max_hyst   - If the CPU temperature falls below than temperature,
-		   an interrupt is generated and tempX_max_alarm is reset.
-tempX_max_alarm  - Set if the temperature reaches or exceeds tempX_max.
-		   Reset if the temperature drops to or below tempX_max_hyst.
 tempX_crit	 - Maximum junction temperature (in millidegrees Celsius).
 tempX_crit_alarm - Set when Out-of-spec bit is set, never clears.
 		   Correct CPU operation is no longer guaranteed.
@@ -49,9 +42,10 @@ tempX_label	 - Contains string "Core X", where X is processor
 		   number. For Package temp, this will be "Physical id Y",
 		   where Y is the package number.
 
-The TjMax temperature is set to 85 degrees C if undocumented model specific
-register (UMSR) 0xee has bit 30 set. If not the TjMax is 100 degrees C as
-(sometimes) documented in processor datasheet.
+On CPU models which support it, TjMax is read from a model-specific register.
+On other models, it is set to an arbitrary value based on weak heuristics.
+If these heuristics don't work for you, you can pass the correct TjMax value
+as a module parameter (tjmax).
 
 Appendix A. Known TjMax lists (TBD):
 Some information comes from ark.intel.com

Documentation/kernel-parameters.txt

@@ -2086,9 +2086,12 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 			Override pmtimer IOPort with a hex value.
 			e.g. pmtmr=0x508
 
-	pnp.debug	[PNP]
-			Enable PNP debug messages.  This depends on the
-			CONFIG_PNP_DEBUG_MESSAGES option.
+	pnp.debug=1	[PNP]
+			Enable PNP debug messages (depends on the
+			CONFIG_PNP_DEBUG_MESSAGES option).  Change at run-time
+			via /sys/module/pnp/parameters/debug.  We always show
+			current resource usage; turning this on also shows
+			possible settings and some assignment information.
 
 	pnpacpi=	[ACPI]
 			{ off }

Documentation/networking/dmfe.txt

@@ -1,3 +1,5 @@
+Note: This driver doesn't have a maintainer.
+
 Davicom DM9102(A)/DM9132/DM9801 fast ethernet driver for Linux.
 
 This program is free software; you can redistribute it and/or
@@ -55,7 +57,6 @@ Test and make sure PCI latency is now correct for all cases.
 Authors:
 
 Sten Wang <sten_wang@davicom.com.tw >   : Original Author
-Tobias Ringstrom <tori@unhappy.mine.nu> : Current Maintainer
 
 Contributors:
 

Documentation/vm/transhuge.txt

@@ -123,10 +123,11 @@ be automatically shutdown if it's set to "never".
 khugepaged runs usually at low frequency so while one may not want to
 invoke defrag algorithms synchronously during the page faults, it
 should be worth invoking defrag at least in khugepaged. However it's
-also possible to disable defrag in khugepaged:
+also possible to disable defrag in khugepaged by writing 0 or enable
+defrag in khugepaged by writing 1:
 
-echo yes >/sys/kernel/mm/transparent_hugepage/khugepaged/defrag
-echo no >/sys/kernel/mm/transparent_hugepage/khugepaged/defrag
+echo 0 >/sys/kernel/mm/transparent_hugepage/khugepaged/defrag
+echo 1 >/sys/kernel/mm/transparent_hugepage/khugepaged/defrag
 
 You can also control how many pages khugepaged should scan at each
 pass:

MAINTAINERS

@@ -1278,7 +1278,6 @@ F:	drivers/input/misc/ati_remote2.c
 ATLX ETHERNET DRIVERS
 M:	Jay Cliburn <jcliburn@gmail.com>
 M:	Chris Snook <chris.snook@gmail.com>
-M:	Jie Yang <jie.yang@atheros.com>
 L:	netdev@vger.kernel.org
 W:	http://sourceforge.net/projects/atl1
 W:	http://atl1.sourceforge.net
@@ -1574,7 +1573,6 @@ F:	drivers/scsi/bfa/
 
 BROCADE BNA 10 GIGABIT ETHERNET DRIVER
 M:	Rasesh Mody <rmody@brocade.com>
-M:	Debashis Dutt <ddutt@brocade.com>
 L:	netdev@vger.kernel.org
 S:	Supported
 F:	drivers/net/bna/
@@ -1758,7 +1756,6 @@ F:	Documentation/zh_CN/
 
 CISCO VIC ETHERNET NIC DRIVER
 M:	Christian Benvenuti <benve@cisco.com>
-M:	Vasanthy Kolluri <vkolluri@cisco.com>
 M:	Roopa Prabhu <roprabhu@cisco.com>
 M:	David Wang <dwang2@cisco.com>
 S:	Supported
@@ -3262,6 +3259,17 @@ F:	Documentation/input/multi-touch-protocol.txt
 F:	drivers/input/input-mt.c
 K:	\b(ABS|SYN)_MT_
 
+INTEL C600 SERIES SAS CONTROLLER DRIVER
+M:	Intel SCU Linux support <intel-linux-scu@intel.com>
+M:	Dan Williams <dan.j.williams@intel.com>
+M:	Dave Jiang <dave.jiang@intel.com>
+M:	Ed Nadolski <edmund.nadolski@intel.com>
+L:	linux-scsi@vger.kernel.org
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/djbw/isci.git
+S:	Maintained
+F:	drivers/scsi/isci/
+F:	firmware/isci/
+
 INTEL IDLE DRIVER
 M:	Len Brown <lenb@kernel.org>
 L:	linux-pm@lists.linux-foundation.org
@@ -4404,7 +4412,8 @@ L:	netfilter@vger.kernel.org
 L:	coreteam@netfilter.org
 W:	http://www.netfilter.org/
 W:	http://www.iptables.org/
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/kaber/nf-2.6.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-2.6.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next-2.6.git
 S:	Supported
 F:	include/linux/netfilter*
 F:	include/linux/netfilter/
@@ -4774,7 +4783,7 @@ F:	drivers/net/wireless/orinoco/
 
 OSD LIBRARY and FILESYSTEM
 M:	Boaz Harrosh <bharrosh@panasas.com>
-M:	Benny Halevy <bhalevy@panasas.com>
+M:	Benny Halevy <bhalevy@tonian.com>
 L:	osd-dev@open-osd.org
 W:	http://open-osd.org
 T:	git git://git.open-osd.org/open-osd.git
@@ -7200,6 +7209,9 @@ W:	http://opensource.wolfsonmicro.com/content/linux-drivers-wolfson-devices
 S:	Supported
 F:	Documentation/hwmon/wm83??
 F:	drivers/leds/leds-wm83*.c
+F:	drivers/input/misc/wm831x-on.c
+F:	drivers/input/touchscreen/wm831x-ts.c
+F:	drivers/input/touchscreen/wm97*.c
 F:	drivers/mfd/wm8*.c
 F:	drivers/power/wm83*.c
 F:	drivers/rtc/rtc-wm83*.c
@@ -7209,6 +7221,7 @@ F:	drivers/watchdog/wm83*_wdt.c
 F:	include/linux/mfd/wm831x/
 F:	include/linux/mfd/wm8350/
 F:	include/linux/mfd/wm8400*
+F:	include/linux/wm97xx.h
 F:	include/sound/wm????.h
 F:	sound/soc/codecs/wm*
 

Makefile

@@ -1,7 +1,7 @@
 VERSION = 3
 PATCHLEVEL = 1
 SUBLEVEL = 0
-EXTRAVERSION = -rc6
+EXTRAVERSION = -rc8
 NAME = "Divemaster Edition"
 
 # *DOCUMENTATION*

arch/alpha/Kconfig

@@ -51,7 +51,7 @@ config GENERIC_CMOS_UPDATE
         def_bool y
 
 config GENERIC_GPIO
-	def_bool y
+	bool
 
 config ZONE_DMA
 	bool

arch/arm/Kconfig

@@ -725,9 +725,6 @@ config ARCH_S3C64XX
 	select SAMSUNG_IRQ_VIC_TIMER
 	select SAMSUNG_IRQ_UART
 	select S3C_GPIO_TRACK
-	select S3C_GPIO_PULL_UPDOWN
-	select S3C_GPIO_CFG_S3C24XX
-	select S3C_GPIO_CFG_S3C64XX
 	select S3C_DEV_NAND
 	select USB_ARCH_HAS_OHCI
 	select SAMSUNG_GPIOLIB_4BIT
@@ -1284,6 +1281,20 @@ config ARM_ERRATA_364296
 	  processor into full low interrupt latency mode. ARM11MPCore
 	  is not affected.
 
+config ARM_ERRATA_764369
+	bool "ARM errata: Data cache line maintenance operation by MVA may not succeed"
+	depends on CPU_V7 && SMP
+	help
+	  This option enables the workaround for erratum 764369
+	  affecting Cortex-A9 MPCore with two or more processors (all
+	  current revisions). Under certain timing circumstances, a data
+	  cache line maintenance operation by MVA targeting an Inner
+	  Shareable memory region may fail to proceed up to either the
+	  Point of Coherency or to the Point of Unification of the
+	  system. This workaround adds a DSB instruction before the
+	  relevant cache maintenance functions and sets a specific bit
+	  in the diagnostic control register of the SCU.
+
 endmenu
 
 source "arch/arm/common/Kconfig"
@@ -2083,7 +2094,7 @@ menu "Power management options"
 source "kernel/power/Kconfig"
 
 config ARCH_SUSPEND_POSSIBLE
-	depends on !ARCH_S5P64X0 && !ARCH_S5PC100
+	depends on !ARCH_S5PC100
 	depends on CPU_ARM920T || CPU_ARM926T || CPU_SA1100 || \
 		CPU_V6 || CPU_V6K || CPU_V7 || CPU_XSC3 || CPU_XSCALE
 	def_bool y

arch/arm/boot/dts/tegra-harmony.dts

@@ -57,14 +57,14 @@
 	};
 
 	sdhci@c8000200 {
-		gpios = <&gpio 69 0>, /* cd, gpio PI5 */
-			<&gpio 57 0>, /* wp, gpio PH1 */
-			<&gpio 155 0>; /* power, gpio PT3 */
+		cd-gpios = <&gpio 69 0>; /* gpio PI5 */
+		wp-gpios = <&gpio 57 0>; /* gpio PH1 */
+		power-gpios = <&gpio 155 0>; /* gpio PT3 */
 	};
 
 	sdhci@c8000600 {
-		gpios = <&gpio 58 0>, /* cd, gpio PH2 */
-			<&gpio 59 0>, /* wp, gpio PH3 */
-			<&gpio 70 0>; /* power, gpio PI6 */
+		cd-gpios = <&gpio 58 0>; /* gpio PH2 */
+		wp-gpios = <&gpio 59 0>; /* gpio PH3 */
+		power-gpios = <&gpio 70 0>; /* gpio PI6 */
 	};
 };

arch/arm/boot/dts/tegra-seaboard.dts

@@ -21,8 +21,8 @@
 	};
 
 	sdhci@c8000400 {
-		gpios = <&gpio 69 0>, /* cd, gpio PI5 */
-			<&gpio 57 0>, /* wp, gpio PH1 */
-			<&gpio 70 0>; /* power, gpio PI6 */
+		cd-gpios = <&gpio 69 0>; /* gpio PI5 */
+		wp-gpios = <&gpio 57 0>; /* gpio PH1 */
+		power-gpios = <&gpio 70 0>; /* gpio PI6 */
 	};
 };

arch/arm/configs/exynos4_defconfig

@@ -11,6 +11,7 @@ CONFIG_MACH_SMDKV310=y
 CONFIG_MACH_ARMLEX4210=y
 CONFIG_MACH_UNIVERSAL_C210=y
 CONFIG_MACH_NURI=y
+CONFIG_MACH_ORIGEN=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_SMP=y

arch/arm/include/asm/futex.h

@@ -25,17 +25,17 @@
 
 #ifdef CONFIG_SMP
 
-#define __futex_atomic_op(insn, ret, oldval, uaddr, oparg)	\
+#define __futex_atomic_op(insn, ret, oldval, tmp, uaddr, oparg)	\
 	smp_mb();						\
 	__asm__ __volatile__(					\
-	"1:	ldrex	%1, [%2]\n"				\
+	"1:	ldrex	%1, [%3]\n"				\
 	"	" insn "\n"					\
-	"2:	strex	%1, %0, [%2]\n"				\
-	"	teq	%1, #0\n"				\
+	"2:	strex	%2, %0, [%3]\n"				\
+	"	teq	%2, #0\n"				\
 	"	bne	1b\n"					\
 	"	mov	%0, #0\n"				\
-	__futex_atomic_ex_table("%4")				\
-	: "=&r" (ret), "=&r" (oldval)				\
+	__futex_atomic_ex_table("%5")				\
+	: "=&r" (ret), "=&r" (oldval), "=&r" (tmp)		\
 	: "r" (uaddr), "r" (oparg), "Ir" (-EFAULT)		\
 	: "cc", "memory")
 
@@ -73,14 +73,14 @@ futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr,
 #include <linux/preempt.h>
 #include <asm/domain.h>
 
-#define __futex_atomic_op(insn, ret, oldval, uaddr, oparg)	\
+#define __futex_atomic_op(insn, ret, oldval, tmp, uaddr, oparg)	\
 	__asm__ __volatile__(					\
-	"1:	" T(ldr) "	%1, [%2]\n"			\
+	"1:	" T(ldr) "	%1, [%3]\n"			\
 	"	" insn "\n"					\
-	"2:	" T(str) "	%0, [%2]\n"			\
+	"2:	" T(str) "	%0, [%3]\n"			\
 	"	mov	%0, #0\n"				\
-	__futex_atomic_ex_table("%4")				\
-	: "=&r" (ret), "=&r" (oldval)				\
+	__futex_atomic_ex_table("%5")				\
+	: "=&r" (ret), "=&r" (oldval), "=&r" (tmp)		\
 	: "r" (uaddr), "r" (oparg), "Ir" (-EFAULT)		\
 	: "cc", "memory")
 
@@ -117,7 +117,7 @@ futex_atomic_op_inuser (int encoded_op, u32 __user *uaddr)
 	int cmp = (encoded_op >> 24) & 15;
 	int oparg = (encoded_op << 8) >> 20;
 	int cmparg = (encoded_op << 20) >> 20;
-	int oldval = 0, ret;
+	int oldval = 0, ret, tmp;
 
 	if (encoded_op & (FUTEX_OP_OPARG_SHIFT << 28))
 		oparg = 1 << oparg;
@@ -129,19 +129,19 @@ futex_atomic_op_inuser (int encoded_op, u32 __user *uaddr)
 
 	switch (op) {
 	case FUTEX_OP_SET:
-		__futex_atomic_op("mov	%0, %3", ret, oldval, uaddr, oparg);
+		__futex_atomic_op("mov	%0, %4", ret, oldval, tmp, uaddr, oparg);
 		break;
 	case FUTEX_OP_ADD:
-		__futex_atomic_op("add	%0, %1, %3", ret, oldval, uaddr, oparg);
+		__futex_atomic_op("add	%0, %1, %4", ret, oldval, tmp, uaddr, oparg);
 		break;
 	case FUTEX_OP_OR:
-		__futex_atomic_op("orr	%0, %1, %3", ret, oldval, uaddr, oparg);
+		__futex_atomic_op("orr	%0, %1, %4", ret, oldval, tmp, uaddr, oparg);
 		break;
 	case FUTEX_OP_ANDN:
-		__futex_atomic_op("and	%0, %1, %3", ret, oldval, uaddr, ~oparg);
+		__futex_atomic_op("and	%0, %1, %4", ret, oldval, tmp, uaddr, ~oparg);
 		break;
 	case FUTEX_OP_XOR:
-		__futex_atomic_op("eor	%0, %1, %3", ret, oldval, uaddr, oparg);
+		__futex_atomic_op("eor	%0, %1, %4", ret, oldval, tmp, uaddr, oparg);
 		break;
 	default:
 		ret = -ENOSYS;

arch/arm/include/asm/hardware/pl080.h

@@ -21,6 +21,9 @@
  * OneNAND features.
 */
 
+#ifndef ASM_PL080_H
+#define ASM_PL080_H
+
 #define PL080_INT_STATUS			(0x00)
 #define PL080_TC_STATUS				(0x04)
 #define PL080_TC_CLEAR				(0x08)
@@ -138,3 +141,4 @@ struct pl080s_lli {
 	u32	control1;
 };
 
+#endif /* ASM_PL080_H */

arch/arm/include/asm/unistd.h

@@ -478,8 +478,8 @@
 /*
  * Unimplemented (or alternatively implemented) syscalls
  */
-#define __IGNORE_fadvise64_64		1
-#define __IGNORE_migrate_pages		1
+#define __IGNORE_fadvise64_64
+#define __IGNORE_migrate_pages
 
 #endif /* __KERNEL__ */
 #endif /* __ASM_ARM_UNISTD_H */

arch/arm/kernel/smp_scu.c

@@ -13,6 +13,7 @@
 
 #include <asm/smp_scu.h>
 #include <asm/cacheflush.h>
+#include <asm/cputype.h>
 
 #define SCU_CTRL		0x00
 #define SCU_CONFIG		0x04
@@ -37,6 +38,15 @@ void __init scu_enable(void __iomem *scu_base)
 {
 	u32 scu_ctrl;
 
+#ifdef CONFIG_ARM_ERRATA_764369
+	/* Cortex-A9 only */
+	if ((read_cpuid(CPUID_ID) & 0xff0ffff0) == 0x410fc090) {
+		scu_ctrl = __raw_readl(scu_base + 0x30);
+		if (!(scu_ctrl & 1))
+			__raw_writel(scu_ctrl | 0x1, scu_base + 0x30);
+	}
+#endif
+
 	scu_ctrl = __raw_readl(scu_base + SCU_CTRL);
 	/* already enabled? */
 	if (scu_ctrl & 1)

arch/arm/kernel/vmlinux.lds.S

@@ -23,8 +23,10 @@
 
 #if defined(CONFIG_SMP_ON_UP) && !defined(CONFIG_DEBUG_SPINLOCK)
 #define ARM_EXIT_KEEP(x)	x
+#define ARM_EXIT_DISCARD(x)
 #else
 #define ARM_EXIT_KEEP(x)
+#define ARM_EXIT_DISCARD(x)	x
 #endif
 
 OUTPUT_ARCH(arm)
@@ -39,6 +41,11 @@ jiffies = jiffies_64 + 4;
 SECTIONS
 {
 	/*
+	 * XXX: The linker does not define how output sections are
+	 * assigned to input sections when there are multiple statements
+	 * matching the same input section name.  There is no documented
+	 * order of matching.
+	 *
 	 * unwind exit sections must be discarded before the rest of the
 	 * unwind sections get included.
 	 */
@@ -47,6 +54,9 @@ SECTIONS
 		*(.ARM.extab.exit.text)
 		ARM_CPU_DISCARD(*(.ARM.exidx.cpuexit.text))
 		ARM_CPU_DISCARD(*(.ARM.extab.cpuexit.text))
+		ARM_EXIT_DISCARD(EXIT_TEXT)
+		ARM_EXIT_DISCARD(EXIT_DATA)
+		EXIT_CALL
 #ifndef CONFIG_HOTPLUG
 		*(.ARM.exidx.devexit.text)
 		*(.ARM.extab.devexit.text)
@@ -58,6 +68,8 @@ SECTIONS
 #ifndef CONFIG_SMP_ON_UP
 		*(.alt.smp.init)
 #endif
+		*(.discard)
+		*(.discard.*)
 	}
 
 #ifdef CONFIG_XIP_KERNEL
@@ -279,9 +291,6 @@ SECTIONS
 
 	STABS_DEBUG
 	.comment 0 : { *(.comment) }
-
-	/* Default discards */
-	DISCARDS
 }
 
 /*

arch/arm/mach-dove/common.c

@@ -158,7 +158,7 @@ void __init dove_spi0_init(void)
 
 void __init dove_spi1_init(void)
 {
-	orion_spi_init(DOVE_SPI1_PHYS_BASE, get_tclk());
+	orion_spi_1_init(DOVE_SPI1_PHYS_BASE, get_tclk());
 }
 
 /*****************************************************************************

arch/arm/mach-exynos4/Kconfig

@@ -11,10 +11,24 @@ if ARCH_EXYNOS4
 
 config CPU_EXYNOS4210
 	bool
-	select S3C_PL330_DMA
+	select SAMSUNG_DMADEV
+	select S5P_PM if PM
+	select S5P_SLEEP if PM
 	help
 	  Enable EXYNOS4210 CPU support
 
+config SOC_EXYNOS4212
+	bool
+	select S5P_PM if PM
+	select S5P_SLEEP if PM
+	help
+	  Enable EXYNOS4212 SoC support
+
+config SOC_EXYNOS4412
+	bool
+	help
+	  Enable EXYNOS4412 SoC support
+
 config EXYNOS4_MCT
 	bool
 	default y
@@ -111,24 +125,11 @@ config EXYNOS4_SETUP_USB_PHY
 
 menu "EXYNOS4 Machines"
 
+comment "EXYNOS4210 Boards"
+
 config MACH_SMDKC210
 	bool "SMDKC210"
-	select CPU_EXYNOS4210
-	select S5P_DEV_FIMD0
-	select S3C_DEV_RTC
-	select S3C_DEV_WDT
-	select S3C_DEV_I2C1
-	select S3C_DEV_HSMMC
-	select S3C_DEV_HSMMC1
-	select S3C_DEV_HSMMC2
-	select S3C_DEV_HSMMC3
-	select SAMSUNG_DEV_PWM
-	select SAMSUNG_DEV_BACKLIGHT
-	select EXYNOS4_DEV_PD
-	select EXYNOS4_DEV_SYSMMU
-	select EXYNOS4_SETUP_FIMD0
-	select EXYNOS4_SETUP_I2C1
-	select EXYNOS4_SETUP_SDHCI
+	select MACH_SMDKV310
 	help
 	  Machine support for Samsung SMDKC210
 
@@ -139,6 +140,14 @@ config MACH_SMDKV310
 	select S3C_DEV_RTC
 	select S3C_DEV_WDT
 	select S3C_DEV_I2C1
+	select S5P_DEV_FIMC0
+	select S5P_DEV_FIMC1
+	select S5P_DEV_FIMC2
+	select S5P_DEV_FIMC3
+	select S5P_DEV_I2C_HDMIPHY
+	select S5P_DEV_MFC
+	select S5P_DEV_TV
+	select S5P_DEV_USB_EHCI
 	select S3C_DEV_HSMMC
 	select S3C_DEV_HSMMC1
 	select S3C_DEV_HSMMC2
@@ -153,6 +162,7 @@ config MACH_SMDKV310
 	select EXYNOS4_SETUP_I2C1
 	select EXYNOS4_SETUP_KEYPAD
 	select EXYNOS4_SETUP_SDHCI
+	select EXYNOS4_SETUP_USB_PHY
 	help
 	  Machine support for Samsung SMDKV310
 
@@ -178,19 +188,26 @@ config MACH_UNIVERSAL_C210
 	select S5P_DEV_FIMC1
 	select S5P_DEV_FIMC2
 	select S5P_DEV_FIMC3
+	select S5P_DEV_CSIS0
+	select S5P_DEV_FIMD0
 	select S3C_DEV_HSMMC
 	select S3C_DEV_HSMMC2
 	select S3C_DEV_HSMMC3
 	select S3C_DEV_I2C1
 	select S3C_DEV_I2C3
 	select S3C_DEV_I2C5
+	select S5P_DEV_I2C_HDMIPHY
 	select S5P_DEV_MFC
 	select S5P_DEV_ONENAND
+	select S5P_DEV_TV
 	select EXYNOS4_DEV_PD
+	select EXYNOS4_SETUP_FIMD0
 	select EXYNOS4_SETUP_I2C1
 	select EXYNOS4_SETUP_I2C3
 	select EXYNOS4_SETUP_I2C5
 	select EXYNOS4_SETUP_SDHCI
+	select EXYNOS4_SETUP_FIMC
+	select S5P_SETUP_MIPIPHY
 	help
 	  Machine support for Samsung Mobile Universal S5PC210 Reference
 	  Board.
@@ -199,6 +216,8 @@ config MACH_NURI
 	bool "Mobile NURI Board"
 	select CPU_EXYNOS4210
 	select S3C_DEV_WDT
+	select S3C_DEV_RTC
+	select S5P_DEV_FIMD0
 	select S3C_DEV_HSMMC
 	select S3C_DEV_HSMMC2
 	select S3C_DEV_HSMMC3
@@ -208,6 +227,7 @@ config MACH_NURI
 	select S5P_DEV_MFC
 	select S5P_DEV_USB_EHCI
 	select EXYNOS4_DEV_PD
+	select EXYNOS4_SETUP_FIMD0
 	select EXYNOS4_SETUP_I2C1
 	select EXYNOS4_SETUP_I2C3
 	select EXYNOS4_SETUP_I2C5
@@ -218,6 +238,62 @@ config MACH_NURI
 	help
 	  Machine support for Samsung Mobile NURI Board.
 
+config MACH_ORIGEN
+	bool "ORIGEN"
+	select CPU_EXYNOS4210
+	select S3C_DEV_RTC
+	select S3C_DEV_WDT
+	select S3C_DEV_HSMMC
+	select S3C_DEV_HSMMC2
+	select S5P_DEV_FIMC0
+	select S5P_DEV_FIMC1
+	select S5P_DEV_FIMC2
+	select S5P_DEV_FIMC3
+	select S5P_DEV_FIMD0
+	select S5P_DEV_I2C_HDMIPHY
+	select S5P_DEV_TV
+	select S5P_DEV_USB_EHCI
+	select EXYNOS4_DEV_PD
+	select SAMSUNG_DEV_BACKLIGHT
+	select SAMSUNG_DEV_PWM
+	select EXYNOS4_SETUP_FIMD0
+	select EXYNOS4_SETUP_SDHCI
+	select EXYNOS4_SETUP_USB_PHY
+	help
+	  Machine support for ORIGEN based on Samsung EXYNOS4210
+
+comment "EXYNOS4212 Boards"
+
+config MACH_SMDK4212
+	bool "SMDK4212"
+	select SOC_EXYNOS4212
+	select S3C_DEV_HSMMC2
+	select S3C_DEV_HSMMC3
+	select S3C_DEV_I2C1
+	select S3C_DEV_I2C3
+	select S3C_DEV_I2C7
+	select S3C_DEV_RTC
+	select S3C_DEV_WDT
+	select SAMSUNG_DEV_BACKLIGHT
+	select SAMSUNG_DEV_KEYPAD
+	select SAMSUNG_DEV_PWM
+	select EXYNOS4_SETUP_I2C1
+	select EXYNOS4_SETUP_I2C3
+	select EXYNOS4_SETUP_I2C7
+	select EXYNOS4_SETUP_KEYPAD
+	select EXYNOS4_SETUP_SDHCI
+	help
+	  Machine support for Samsung SMDK4212
+
+comment "EXYNOS4412 Boards"
+
+config MACH_SMDK4412
+	bool "SMDK4412"
+	select SOC_EXYNOS4412
+	select MACH_SMDK4212
+	help
+	  Machine support for Samsung SMDK4412
+
 endmenu
 
 comment "Configuration for HSMMC bus width"

arch/arm/mach-exynos4/Makefile

@@ -12,9 +12,11 @@ obj-				:=
 
 # Core support for EXYNOS4 system
 
-obj-$(CONFIG_CPU_EXYNOS4210)	+= cpu.o init.o clock.o irq-combiner.o
-obj-$(CONFIG_CPU_EXYNOS4210)	+= setup-i2c0.o irq-eint.o dma.o pmu.o
-obj-$(CONFIG_PM)		+= pm.o sleep.o
+obj-$(CONFIG_ARCH_EXYNOS4)	+= cpu.o init.o clock.o irq-combiner.o
+obj-$(CONFIG_ARCH_EXYNOS4)	+= setup-i2c0.o irq-eint.o dma.o pmu.o
+obj-$(CONFIG_CPU_EXYNOS4210)	+= clock-exynos4210.o
+obj-$(CONFIG_SOC_EXYNOS4212)	+= clock-exynos4212.o
+obj-$(CONFIG_PM)		+= pm.o
 obj-$(CONFIG_CPU_IDLE)		+= cpuidle.o
 
 obj-$(CONFIG_SMP)		+= platsmp.o headsmp.o
@@ -25,11 +27,15 @@ obj-$(CONFIG_HOTPLUG_CPU)	+= hotplug.o
 
 # machine support
 
-obj-$(CONFIG_MACH_SMDKC210)		+= mach-smdkc210.o
+obj-$(CONFIG_MACH_SMDKC210)		+= mach-smdkv310.o
 obj-$(CONFIG_MACH_SMDKV310)		+= mach-smdkv310.o
 obj-$(CONFIG_MACH_ARMLEX4210)		+= mach-armlex4210.o
 obj-$(CONFIG_MACH_UNIVERSAL_C210)	+= mach-universal_c210.o
 obj-$(CONFIG_MACH_NURI)			+= mach-nuri.o
+obj-$(CONFIG_MACH_ORIGEN)		+= mach-origen.o
+
+obj-$(CONFIG_MACH_SMDK4212)		+= mach-smdk4x12.o
+obj-$(CONFIG_MACH_SMDK4412)		+= mach-smdk4x12.o
 
 # device support
 

arch/arm/mach-exynos4/clock-exynos4210.c

@@ -0,0 +1,139 @@
+/*
+ * linux/arch/arm/mach-exynos4/clock-exynos4210.c
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * EXYNOS4210 - Clock support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/syscore_ops.h>
+
+#include <plat/cpu-freq.h>
+#include <plat/clock.h>
+#include <plat/cpu.h>
+#include <plat/pll.h>
+#include <plat/s5p-clock.h>
+#include <plat/clock-clksrc.h>
+#include <plat/exynos4.h>
+#include <plat/pm.h>
+
+#include <mach/hardware.h>
+#include <mach/map.h>
+#include <mach/regs-clock.h>
+#include <mach/exynos4-clock.h>
+
+static struct sleep_save exynos4210_clock_save[] = {
+	SAVE_ITEM(S5P_CLKSRC_IMAGE),
+	SAVE_ITEM(S5P_CLKSRC_LCD1),
+	SAVE_ITEM(S5P_CLKDIV_IMAGE),
+	SAVE_ITEM(S5P_CLKDIV_LCD1),
+	SAVE_ITEM(S5P_CLKSRC_MASK_LCD1),
+	SAVE_ITEM(S5P_CLKGATE_IP_IMAGE_4210),
+	SAVE_ITEM(S5P_CLKGATE_IP_LCD1),
+	SAVE_ITEM(S5P_CLKGATE_IP_PERIR_4210),
+};
+
+static struct clksrc_clk *sysclks[] = {
+	/* nothing here yet */
+};
+
+static int exynos4_clksrc_mask_lcd1_ctrl(struct clk *clk, int enable)
+{
+	return s5p_gatectrl(S5P_CLKSRC_MASK_LCD1, clk, enable);
+}
+
+static struct clksrc_clk clksrcs[] = {
+	{
+		.clk		= {
+			.name		= "sclk_sata",
+			.id		= -1,
+			.enable		= exynos4_clksrc_mask_fsys_ctrl,
+			.ctrlbit	= (1 << 24),
+		},
+		.sources = &clkset_mout_corebus,
+		.reg_src = { .reg = S5P_CLKSRC_FSYS, .shift = 24, .size = 1 },
+		.reg_div = { .reg = S5P_CLKDIV_FSYS0, .shift = 20, .size = 4 },
+	}, {
+		.clk		= {
+			.name		= "sclk_fimd",
+			.devname	= "exynos4-fb.1",
+			.enable		= exynos4_clksrc_mask_lcd1_ctrl,
+			.ctrlbit	= (1 << 0),
+		},
+		.sources = &clkset_group,
+		.reg_src = { .reg = S5P_CLKSRC_LCD1, .shift = 0, .size = 4 },
+		.reg_div = { .reg = S5P_CLKDIV_LCD1, .shift = 0, .size = 4 },
+	},
+};
+
+static struct clk init_clocks_off[] = {
+	{
+		.name		= "sataphy",
+		.id		= -1,
+		.parent		= &clk_aclk_133.clk,
+		.enable		= exynos4_clk_ip_fsys_ctrl,
+		.ctrlbit	= (1 << 3),
+	}, {
+		.name		= "sata",
+		.id		= -1,
+		.parent		= &clk_aclk_133.clk,
+		.enable		= exynos4_clk_ip_fsys_ctrl,
+		.ctrlbit	= (1 << 10),
+	}, {
+		.name		= "fimd",
+		.devname	= "exynos4-fb.1",
+		.enable		= exynos4_clk_ip_lcd1_ctrl,
+		.ctrlbit	= (1 << 0),
+	},
+};
+
+#ifdef CONFIG_PM_SLEEP
+static int exynos4210_clock_suspend(void)
+{
+	s3c_pm_do_save(exynos4210_clock_save, ARRAY_SIZE(exynos4210_clock_save));
+
+	return 0;
+}
+
+static void exynos4210_clock_resume(void)
+{
+	s3c_pm_do_restore_core(exynos4210_clock_save, ARRAY_SIZE(exynos4210_clock_save));
+}
+
+#else
+#define exynos4210_clock_suspend NULL
+#define exynos4210_clock_resume NULL
+#endif
+
+struct syscore_ops exynos4210_clock_syscore_ops = {
+	.suspend	= exynos4210_clock_suspend,
+	.resume		= exynos4210_clock_resume,
+};
+
+void __init exynos4210_register_clocks(void)
+{
+	int ptr;
+
+	clk_mout_mpll.reg_src.reg = S5P_CLKSRC_CPU;
+	clk_mout_mpll.reg_src.shift = 8;
+	clk_mout_mpll.reg_src.size = 1;
+
+	for (ptr = 0; ptr < ARRAY_SIZE(sysclks); ptr++)
+		s3c_register_clksrc(sysclks[ptr], 1);
+
+	s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs));
+
+	s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
+	s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
+
+	register_syscore_ops(&exynos4210_clock_syscore_ops);
+}

arch/arm/mach-exynos4/clock-exynos4212.c

@@ -0,0 +1,118 @@
+/*
+ * linux/arch/arm/mach-exynos4/clock-exynos4212.c
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * EXYNOS4212 - Clock support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/syscore_ops.h>
+
+#include <plat/cpu-freq.h>
+#include <plat/clock.h>
+#include <plat/cpu.h>
+#include <plat/pll.h>
+#include <plat/s5p-clock.h>
+#include <plat/clock-clksrc.h>
+#include <plat/exynos4.h>
+#include <plat/pm.h>
+
+#include <mach/hardware.h>
+#include <mach/map.h>
+#include <mach/regs-clock.h>
+#include <mach/exynos4-clock.h>
+
+static struct sleep_save exynos4212_clock_save[] = {
+	SAVE_ITEM(S5P_CLKSRC_IMAGE),
+	SAVE_ITEM(S5P_CLKDIV_IMAGE),
+	SAVE_ITEM(S5P_CLKGATE_IP_IMAGE_4212),
+	SAVE_ITEM(S5P_CLKGATE_IP_PERIR_4212),
+};
+
+static struct clk *clk_src_mpll_user_list[] = {
+	[0] = &clk_fin_mpll,
+	[1] = &clk_mout_mpll.clk,
+};
+
+static struct clksrc_sources clk_src_mpll_user = {
+	.sources	= clk_src_mpll_user_list,
+	.nr_sources	= ARRAY_SIZE(clk_src_mpll_user_list),
+};
+
+static struct clksrc_clk clk_mout_mpll_user = {
+	.clk = {
+		.name		= "mout_mpll_user",
+	},
+	.sources	= &clk_src_mpll_user,
+	.reg_src	= { .reg = S5P_CLKSRC_CPU, .shift = 24, .size = 1 },
+};
+
+static struct clksrc_clk *sysclks[] = {
+	&clk_mout_mpll_user,
+};
+
+static struct clksrc_clk clksrcs[] = {
+	/* nothing here yet */
+};
+
+static struct clk init_clocks_off[] = {
+	/* nothing here yet */
+};
+
+#ifdef CONFIG_PM_SLEEP
+static int exynos4212_clock_suspend(void)
+{
+	s3c_pm_do_save(exynos4212_clock_save, ARRAY_SIZE(exynos4212_clock_save));
+
+	return 0;
+}
+
+static void exynos4212_clock_resume(void)
+{
+	s3c_pm_do_restore_core(exynos4212_clock_save, ARRAY_SIZE(exynos4212_clock_save));
+}
+
+#else
+#define exynos4212_clock_suspend NULL
+#define exynos4212_clock_resume NULL
+#endif
+
+struct syscore_ops exynos4212_clock_syscore_ops = {
+	.suspend	= exynos4212_clock_suspend,
+	.resume		= exynos4212_clock_resume,
+};
+
+void __init exynos4212_register_clocks(void)
+{
+	int ptr;
+
+	/* usbphy1 is removed */
+	clkset_group_list[4] = NULL;
+
+	/* mout_mpll_user is used */
+	clkset_group_list[6] = &clk_mout_mpll_user.clk;
+	clkset_aclk_top_list[0] = &clk_mout_mpll_user.clk;
+
+	clk_mout_mpll.reg_src.reg = S5P_CLKSRC_DMC;
+	clk_mout_mpll.reg_src.shift = 12;
+	clk_mout_mpll.reg_src.size = 1;
+
+	for (ptr = 0; ptr < ARRAY_SIZE(sysclks); ptr++)
+		s3c_register_clksrc(sysclks[ptr], 1);
+
+	s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs));
+
+	s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
+	s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
+
+	register_syscore_ops(&exynos4212_clock_syscore_ops);
+}

arch/arm/mach-exynos4/clock.c

@@ -13,6 +13,7 @@
 #include <linux/kernel.h>
 #include <linux/err.h>
 #include <linux/io.h>
+#include <linux/syscore_ops.h>
 
 #include <plat/cpu-freq.h>
 #include <plat/clock.h>
@@ -20,29 +21,101 @@
 #include <plat/pll.h>
 #include <plat/s5p-clock.h>
 #include <plat/clock-clksrc.h>
+#include <plat/exynos4.h>
+#include <plat/pm.h>
 
 #include <mach/map.h>
 #include <mach/regs-clock.h>
 #include <mach/sysmmu.h>
-
-static struct clk clk_sclk_hdmi27m = {
+#include <mach/exynos4-clock.h>
+
+static struct sleep_save exynos4_clock_save[] = {
+	SAVE_ITEM(S5P_CLKDIV_LEFTBUS),
+	SAVE_ITEM(S5P_CLKGATE_IP_LEFTBUS),
+	SAVE_ITEM(S5P_CLKDIV_RIGHTBUS),
+	SAVE_ITEM(S5P_CLKGATE_IP_RIGHTBUS),
+	SAVE_ITEM(S5P_CLKSRC_TOP0),
+	SAVE_ITEM(S5P_CLKSRC_TOP1),
+	SAVE_ITEM(S5P_CLKSRC_CAM),
+	SAVE_ITEM(S5P_CLKSRC_TV),
+	SAVE_ITEM(S5P_CLKSRC_MFC),
+	SAVE_ITEM(S5P_CLKSRC_G3D),
+	SAVE_ITEM(S5P_CLKSRC_LCD0),
+	SAVE_ITEM(S5P_CLKSRC_MAUDIO),
+	SAVE_ITEM(S5P_CLKSRC_FSYS),
+	SAVE_ITEM(S5P_CLKSRC_PERIL0),
+	SAVE_ITEM(S5P_CLKSRC_PERIL1),
+	SAVE_ITEM(S5P_CLKDIV_CAM),
+	SAVE_ITEM(S5P_CLKDIV_TV),
+	SAVE_ITEM(S5P_CLKDIV_MFC),
+	SAVE_ITEM(S5P_CLKDIV_G3D),
+	SAVE_ITEM(S5P_CLKDIV_LCD0),
+	SAVE_ITEM(S5P_CLKDIV_MAUDIO),
+	SAVE_ITEM(S5P_CLKDIV_FSYS0),
+	SAVE_ITEM(S5P_CLKDIV_FSYS1),
+	SAVE_ITEM(S5P_CLKDIV_FSYS2),
+	SAVE_ITEM(S5P_CLKDIV_FSYS3),
+	SAVE_ITEM(S5P_CLKDIV_PERIL0),
+	SAVE_ITEM(S5P_CLKDIV_PERIL1),
+	SAVE_ITEM(S5P_CLKDIV_PERIL2),
+	SAVE_ITEM(S5P_CLKDIV_PERIL3),
+	SAVE_ITEM(S5P_CLKDIV_PERIL4),
+	SAVE_ITEM(S5P_CLKDIV_PERIL5),
+	SAVE_ITEM(S5P_CLKDIV_TOP),
+	SAVE_ITEM(S5P_CLKSRC_MASK_TOP),
+	SAVE_ITEM(S5P_CLKSRC_MASK_CAM),
+	SAVE_ITEM(S5P_CLKSRC_MASK_TV),
+	SAVE_ITEM(S5P_CLKSRC_MASK_LCD0),
+	SAVE_ITEM(S5P_CLKSRC_MASK_MAUDIO),
+	SAVE_ITEM(S5P_CLKSRC_MASK_FSYS),
+	SAVE_ITEM(S5P_CLKSRC_MASK_PERIL0),
+	SAVE_ITEM(S5P_CLKSRC_MASK_PERIL1),
+	SAVE_ITEM(S5P_CLKDIV2_RATIO),
+	SAVE_ITEM(S5P_CLKGATE_SCLKCAM),
+	SAVE_ITEM(S5P_CLKGATE_IP_CAM),
+	SAVE_ITEM(S5P_CLKGATE_IP_TV),
+	SAVE_ITEM(S5P_CLKGATE_IP_MFC),
+	SAVE_ITEM(S5P_CLKGATE_IP_G3D),
+	SAVE_ITEM(S5P_CLKGATE_IP_LCD0),
+	SAVE_ITEM(S5P_CLKGATE_IP_FSYS),
+	SAVE_ITEM(S5P_CLKGATE_IP_GPS),
+	SAVE_ITEM(S5P_CLKGATE_IP_PERIL),
+	SAVE_ITEM(S5P_CLKGATE_BLOCK),
+	SAVE_ITEM(S5P_CLKSRC_MASK_DMC),
+	SAVE_ITEM(S5P_CLKSRC_DMC),
+	SAVE_ITEM(S5P_CLKDIV_DMC0),
+	SAVE_ITEM(S5P_CLKDIV_DMC1),
+	SAVE_ITEM(S5P_CLKGATE_IP_DMC),
+	SAVE_ITEM(S5P_CLKSRC_CPU),
+	SAVE_ITEM(S5P_CLKDIV_CPU),
+	SAVE_ITEM(S5P_CLKDIV_CPU + 0x4),
+	SAVE_ITEM(S5P_CLKGATE_SCLKCPU),
+	SAVE_ITEM(S5P_CLKGATE_IP_CPU),
+};
+
+struct clk clk_sclk_hdmi27m = {
 	.name		= "sclk_hdmi27m",
 	.rate		= 27000000,
 };
 
-static struct clk clk_sclk_hdmiphy = {
+struct clk clk_sclk_hdmiphy = {
 	.name		= "sclk_hdmiphy",
 };
 
-static struct clk clk_sclk_usbphy0 = {
+struct clk clk_sclk_usbphy0 = {
 	.name		= "sclk_usbphy0",
 	.rate		= 27000000,
 };
 
-static struct clk clk_sclk_usbphy1 = {
+struct clk clk_sclk_usbphy1 = {
 	.name		= "sclk_usbphy1",
 };
 
+static struct clk dummy_apb_pclk = {
+	.name		= "apb_pclk",
+	.id		= -1,
+};
+
 static int exynos4_clksrc_mask_top_ctrl(struct clk *clk, int enable)
 {
 	return s5p_gatectrl(S5P_CLKSRC_MASK_TOP, clk, enable);
@@ -58,12 +131,7 @@ static int exynos4_clksrc_mask_lcd0_ctrl(struct clk *clk, int enable)
 	return s5p_gatectrl(S5P_CLKSRC_MASK_LCD0, clk, enable);
 }
 
-static int exynos4_clksrc_mask_lcd1_ctrl(struct clk *clk, int enable)
-{
-	return s5p_gatectrl(S5P_CLKSRC_MASK_LCD1, clk, enable);
-}
-
-static int exynos4_clksrc_mask_fsys_ctrl(struct clk *clk, int enable)
+int exynos4_clksrc_mask_fsys_ctrl(struct clk *clk, int enable)
 {
 	return s5p_gatectrl(S5P_CLKSRC_MASK_FSYS, clk, enable);
 }
@@ -83,6 +151,11 @@ static int exynos4_clk_ip_mfc_ctrl(struct clk *clk, int enable)
 	return s5p_gatectrl(S5P_CLKGATE_IP_MFC, clk, enable);
 }
 
+static int exynos4_clksrc_mask_tv_ctrl(struct clk *clk, int enable)
+{
+	return s5p_gatectrl(S5P_CLKSRC_MASK_TV, clk, enable);
+}
+
 static int exynos4_clk_ip_cam_ctrl(struct clk *clk, int enable)
 {
 	return s5p_gatectrl(S5P_CLKGATE_IP_CAM, clk, enable);
@@ -103,12 +176,12 @@ static int exynos4_clk_ip_lcd0_ctrl(struct clk *clk, int enable)
 	return s5p_gatectrl(S5P_CLKGATE_IP_LCD0, clk, enable);
 }
 
-static int exynos4_clk_ip_lcd1_ctrl(struct clk *clk, int enable)
+int exynos4_clk_ip_lcd1_ctrl(struct clk *clk, int enable)
 {
 	return s5p_gatectrl(S5P_CLKGATE_IP_LCD1, clk, enable);
 }
 
-static int exynos4_clk_ip_fsys_ctrl(struct clk *clk, int enable)
+int exynos4_clk_ip_fsys_ctrl(struct clk *clk, int enable)
 {
 	return s5p_gatectrl(S5P_CLKGATE_IP_FSYS, clk, enable);
 }
@@ -123,6 +196,16 @@ static int exynos4_clk_ip_perir_ctrl(struct clk *clk, int enable)
 	return s5p_gatectrl(S5P_CLKGATE_IP_PERIR, clk, enable);
 }
 
+static int exynos4_clk_hdmiphy_ctrl(struct clk *clk, int enable)
+{
+	return s5p_gatectrl(S5P_HDMI_PHY_CONTROL, clk, enable);
+}
+
+static int exynos4_clk_dac_ctrl(struct clk *clk, int enable)
+{
+	return s5p_gatectrl(S5P_DAC_PHY_CONTROL, clk, enable);
+}
+
 /* Core list of CMU_CPU side */
 
 static struct clksrc_clk clk_mout_apll = {
@@ -133,7 +216,7 @@ static struct clksrc_clk clk_mout_apll = {
 	.reg_src	= { .reg = S5P_CLKSRC_CPU, .shift = 0, .size = 1 },
 };
 
-static struct clksrc_clk clk_sclk_apll = {
+struct clksrc_clk clk_sclk_apll = {
 	.clk	= {
 		.name		= "sclk_apll",
 		.parent		= &clk_mout_apll.clk,
@@ -141,7 +224,7 @@ static struct clksrc_clk clk_sclk_apll = {
 	.reg_div	= { .reg = S5P_CLKDIV_CPU, .shift = 24, .size = 3 },
 };
 
-static struct clksrc_clk clk_mout_epll = {
+struct clksrc_clk clk_mout_epll = {
 	.clk	= {
 		.name		= "mout_epll",
 	},
@@ -149,12 +232,13 @@ static struct clksrc_clk clk_mout_epll = {
 	.reg_src	= { .reg = S5P_CLKSRC_TOP0, .shift = 4, .size = 1 },
 };
 
-static struct clksrc_clk clk_mout_mpll = {
+struct clksrc_clk clk_mout_mpll = {
 	.clk = {
 		.name		= "mout_mpll",
 	},
 	.sources	= &clk_src_mpll,
-	.reg_src	= { .reg = S5P_CLKSRC_CPU, .shift = 8, .size = 1 },
+
+	/* reg_src will be added in each SoCs' clock */
 };
 
 static struct clk *clkset_moutcore_list[] = {
@@ -224,12 +308,12 @@ static struct clksrc_clk clk_periphclk = {
 
 /* Core list of CMU_CORE side */
 
-static struct clk *clkset_corebus_list[] = {
+struct clk *clkset_corebus_list[] = {
 	[0] = &clk_mout_mpll.clk,
 	[1] = &clk_sclk_apll.clk,
 };
 
-static struct clksrc_sources clkset_mout_corebus = {
+struct clksrc_sources clkset_mout_corebus = {
 	.sources	= clkset_corebus_list,
 	.nr_sources	= ARRAY_SIZE(clkset_corebus_list),
 };
@@ -284,12 +368,12 @@ static struct clksrc_clk clk_pclk_acp = {
 
 /* Core list of CMU_TOP side */
 
-static struct clk *clkset_aclk_top_list[] = {
+struct clk *clkset_aclk_top_list[] = {
 	[0] = &clk_mout_mpll.clk,
 	[1] = &clk_sclk_apll.clk,
 };
 
-static struct clksrc_sources clkset_aclk = {
+struct clksrc_sources clkset_aclk = {
 	.sources	= clkset_aclk_top_list,
 	.nr_sources	= ARRAY_SIZE(clkset_aclk_top_list),
 };
@@ -321,7 +405,7 @@ static struct clksrc_clk clk_aclk_160 = {
 	.reg_div	= { .reg = S5P_CLKDIV_TOP, .shift = 8, .size = 3 },
 };
 
-static struct clksrc_clk clk_aclk_133 = {
+struct clksrc_clk clk_aclk_133 = {
 	.clk	= {
 		.name		= "aclk_133",
 	},
@@ -360,7 +444,7 @@ static struct clksrc_sources clkset_sclk_vpll = {
 	.nr_sources	= ARRAY_SIZE(clkset_sclk_vpll_list),
 };
 
-static struct clksrc_clk clk_sclk_vpll = {
+struct clksrc_clk clk_sclk_vpll = {
 	.clk	= {
 		.name		= "sclk_vpll",
 	},
@@ -409,16 +493,6 @@ static struct clk init_clocks_off[] = {
 		.devname	= "exynos4-fb.0",
 		.enable		= exynos4_clk_ip_lcd0_ctrl,
 		.ctrlbit	= (1 << 0),
-	}, {
-		.name		= "fimd",
-		.devname	= "exynos4-fb.1",
-		.enable		= exynos4_clk_ip_lcd1_ctrl,
-		.ctrlbit	= (1 << 0),
-	}, {
-		.name		= "sataphy",
-		.parent		= &clk_aclk_133.clk,
-		.enable		= exynos4_clk_ip_fsys_ctrl,
-		.ctrlbit	= (1 << 3),
 	}, {
 		.name		= "hsmmc",
 		.devname	= "s3c-sdhci.0",
@@ -448,19 +522,49 @@ static struct clk init_clocks_off[] = {
 		.parent		= &clk_aclk_133.clk,
 		.enable		= exynos4_clk_ip_fsys_ctrl,
 		.ctrlbit	= (1 << 9),
+	}, {
+		.name		= "dac",
+		.devname	= "s5p-sdo",
+		.enable		= exynos4_clk_ip_tv_ctrl,
+		.ctrlbit	= (1 << 2),
+	}, {
+		.name		= "mixer",
+		.devname	= "s5p-mixer",
+		.enable		= exynos4_clk_ip_tv_ctrl,
+		.ctrlbit	= (1 << 1),
+	}, {
+		.name		= "vp",
+		.devname	= "s5p-mixer",
+		.enable		= exynos4_clk_ip_tv_ctrl,
+		.ctrlbit	= (1 << 0),
+	}, {
+		.name		= "hdmi",
+		.devname	= "exynos4-hdmi",
+		.enable		= exynos4_clk_ip_tv_ctrl,
+		.ctrlbit	= (1 << 3),
+	}, {
+		.name		= "hdmiphy",
+		.devname	= "exynos4-hdmi",
+		.enable		= exynos4_clk_hdmiphy_ctrl,
+		.ctrlbit	= (1 << 0),
+	}, {
+		.name		= "dacphy",
+		.devname	= "s5p-sdo",
+		.enable		= exynos4_clk_dac_ctrl,
+		.ctrlbit	= (1 << 0),
 	}, {
 		.name		= "sata",
 		.parent		= &clk_aclk_133.clk,
 		.enable		= exynos4_clk_ip_fsys_ctrl,
 		.ctrlbit	= (1 << 10),
 	}, {
-		.name		= "pdma",
-		.devname	= "s3c-pl330.0",
+		.name		= "dma",
+		.devname	= "dma-pl330.0",
 		.enable		= exynos4_clk_ip_fsys_ctrl,
 		.ctrlbit	= (1 << 0),
 	}, {
-		.name		= "pdma",
-		.devname	= "s3c-pl330.1",
+		.name		= "dma",
+		.devname	= "dma-pl330.1",
 		.enable		= exynos4_clk_ip_fsys_ctrl,
 		.ctrlbit	= (1 << 1),
 	}, {
@@ -580,6 +684,12 @@ static struct clk init_clocks_off[] = {
 		.parent		= &clk_aclk_100.clk,
 		.enable		= exynos4_clk_ip_peril_ctrl,
 		.ctrlbit	= (1 << 13),
+	}, {
+		.name		= "i2c",
+		.devname	= "s3c2440-hdmiphy-i2c",
+		.parent		= &clk_aclk_100.clk,
+		.enable		= exynos4_clk_ip_peril_ctrl,
+		.ctrlbit	= (1 << 14),
 	}, {
 		.name		= "SYSMMU_MDMA",
 		.enable		= exynos4_clk_ip_image_ctrl,
@@ -673,7 +783,7 @@ static struct clk init_clocks[] = {
 	}
 };
 
-static struct clk *clkset_group_list[] = {
+struct clk *clkset_group_list[] = {
 	[0] = &clk_ext_xtal_mux,
 	[1] = &clk_xusbxti,
 	[2] = &clk_sclk_hdmi27m,
@@ -685,7 +795,7 @@ static struct clk *clkset_group_list[] = {
 	[8] = &clk_sclk_vpll.clk,
 };
 
-static struct clksrc_sources clkset_group = {
+struct clksrc_sources clkset_group = {
 	.sources	= clkset_group_list,
 	.nr_sources	= ARRAY_SIZE(clkset_group_list),
 };
@@ -782,6 +892,81 @@ static struct clksrc_sources clkset_mout_mfc = {
 	.nr_sources	= ARRAY_SIZE(clkset_mout_mfc_list),
 };
 
+static struct clk *clkset_sclk_dac_list[] = {
+	[0] = &clk_sclk_vpll.clk,
+	[1] = &clk_sclk_hdmiphy,
+};
+
+static struct clksrc_sources clkset_sclk_dac = {
+	.sources	= clkset_sclk_dac_list,
+	.nr_sources	= ARRAY_SIZE(clkset_sclk_dac_list),
+};
+
+static struct clksrc_clk clk_sclk_dac = {
+	.clk		= {
+		.name		= "sclk_dac",
+		.enable		= exynos4_clksrc_mask_tv_ctrl,
+		.ctrlbit	= (1 << 8),
+	},
+	.sources = &clkset_sclk_dac,
+	.reg_src = { .reg = S5P_CLKSRC_TV, .shift = 8, .size = 1 },
+};
+
+static struct clksrc_clk clk_sclk_pixel = {
+	.clk		= {
+		.name		= "sclk_pixel",
+		.parent = &clk_sclk_vpll.clk,
+	},
+	.reg_div = { .reg = S5P_CLKDIV_TV, .shift = 0, .size = 4 },
+};
+
+static struct clk *clkset_sclk_hdmi_list[] = {
+	[0] = &clk_sclk_pixel.clk,
+	[1] = &clk_sclk_hdmiphy,
+};
+
+static struct clksrc_sources clkset_sclk_hdmi = {
+	.sources	= clkset_sclk_hdmi_list,
+	.nr_sources	= ARRAY_SIZE(clkset_sclk_hdmi_list),
+};
+
+static struct clksrc_clk clk_sclk_hdmi = {
+	.clk		= {
+		.name		= "sclk_hdmi",
+		.enable		= exynos4_clksrc_mask_tv_ctrl,
+		.ctrlbit	= (1 << 0),
+	},
+	.sources = &clkset_sclk_hdmi,
+	.reg_src = { .reg = S5P_CLKSRC_TV, .shift = 0, .size = 1 },
+};
+
+static struct clk *clkset_sclk_mixer_list[] = {
+	[0] = &clk_sclk_dac.clk,
+	[1] = &clk_sclk_hdmi.clk,
+};
+
+static struct clksrc_sources clkset_sclk_mixer = {
+	.sources	= clkset_sclk_mixer_list,
+	.nr_sources	= ARRAY_SIZE(clkset_sclk_mixer_list),
+};
+
+static struct clksrc_clk clk_sclk_mixer = {
+	.clk		= {
+		.name		= "sclk_mixer",
+		.enable		= exynos4_clksrc_mask_tv_ctrl,
+		.ctrlbit	= (1 << 4),
+	},
+	.sources = &clkset_sclk_mixer,
+	.reg_src = { .reg = S5P_CLKSRC_TV, .shift = 4, .size = 1 },
+};
+
+static struct clksrc_clk *sclk_tv[] = {
+	&clk_sclk_dac,
+	&clk_sclk_pixel,
+	&clk_sclk_hdmi,
+	&clk_sclk_mixer,
+};
+
 static struct clksrc_clk clk_dout_mmc0 = {
 	.clk		= {
 		.name		= "dout_mmc0",
@@ -899,8 +1084,7 @@ static struct clksrc_clk clksrcs[] = {
 		.reg_div = { .reg = S5P_CLKDIV_CAM, .shift = 28, .size = 4 },
 	}, {
 		.clk		= {
-			.name		= "sclk_cam",
-			.devname	= "exynos4-fimc.0",
+			.name		= "sclk_cam0",
 			.enable		= exynos4_clksrc_mask_cam_ctrl,
 			.ctrlbit	= (1 << 16),
 		},
@@ -909,8 +1093,7 @@ static struct clksrc_clk clksrcs[] = {
 		.reg_div = { .reg = S5P_CLKDIV_CAM, .shift = 16, .size = 4 },
 	}, {
 		.clk		= {
-			.name		= "sclk_cam",
-			.devname	= "exynos4-fimc.1",
+			.name		= "sclk_cam1",
 			.enable		= exynos4_clksrc_mask_cam_ctrl,
 			.ctrlbit	= (1 << 20),
 		},
@@ -967,25 +1150,6 @@ static struct clksrc_clk clksrcs[] = {
 		.sources = &clkset_group,
 		.reg_src = { .reg = S5P_CLKSRC_LCD0, .shift = 0, .size = 4 },
 		.reg_div = { .reg = S5P_CLKDIV_LCD0, .shift = 0, .size = 4 },
-	}, {
-		.clk		= {
-			.name		= "sclk_fimd",
-			.devname	= "exynos4-fb.1",
-			.enable		= exynos4_clksrc_mask_lcd1_ctrl,
-			.ctrlbit	= (1 << 0),
-		},
-		.sources = &clkset_group,
-		.reg_src = { .reg = S5P_CLKSRC_LCD1, .shift = 0, .size = 4 },
-		.reg_div = { .reg = S5P_CLKDIV_LCD1, .shift = 0, .size = 4 },
-	}, {
-		.clk		= {
-			.name		= "sclk_sata",
-			.enable		= exynos4_clksrc_mask_fsys_ctrl,
-			.ctrlbit	= (1 << 24),
-		},
-		.sources = &clkset_mout_corebus,
-		.reg_src = { .reg = S5P_CLKSRC_FSYS, .shift = 24, .size = 1 },
-		.reg_div = { .reg = S5P_CLKDIV_FSYS0, .shift = 20, .size = 4 },
 	}, {
 		.clk		= {
 			.name		= "sclk_spi",
@@ -1116,20 +1280,91 @@ static int xtal_rate;
 
 static unsigned long exynos4_fout_apll_get_rate(struct clk *clk)
 {
-	return s5p_get_pll45xx(xtal_rate, __raw_readl(S5P_APLL_CON0), pll_4508);
+	if (soc_is_exynos4210())
+		return s5p_get_pll45xx(xtal_rate, __raw_readl(S5P_APLL_CON0),
+					pll_4508);
+	else if (soc_is_exynos4212() || soc_is_exynos4412())
+		return s5p_get_pll35xx(xtal_rate, __raw_readl(S5P_APLL_CON0));
+	else
+		return 0;
 }
 
 static struct clk_ops exynos4_fout_apll_ops = {
 	.get_rate = exynos4_fout_apll_get_rate,
 };
 
+static u32 vpll_div[][8] = {
+	{  54000000, 3, 53, 3, 1024, 0, 17, 0 },
+	{ 108000000, 3, 53, 2, 1024, 0, 17, 0 },
+};
+
+static unsigned long exynos4_vpll_get_rate(struct clk *clk)
+{
+	return clk->rate;
+}
+
+static int exynos4_vpll_set_rate(struct clk *clk, unsigned long rate)
+{
+	unsigned int vpll_con0, vpll_con1 = 0;
+	unsigned int i;
+
+	/* Return if nothing changed */
+	if (clk->rate == rate)
+		return 0;
+
+	vpll_con0 = __raw_readl(S5P_VPLL_CON0);
+	vpll_con0 &= ~(0x1 << 27 |					\
+			PLL90XX_MDIV_MASK << PLL46XX_MDIV_SHIFT |	\
+			PLL90XX_PDIV_MASK << PLL46XX_PDIV_SHIFT |	\
+			PLL90XX_SDIV_MASK << PLL46XX_SDIV_SHIFT);
+
+	vpll_con1 = __raw_readl(S5P_VPLL_CON1);
+	vpll_con1 &= ~(PLL46XX_MRR_MASK << PLL46XX_MRR_SHIFT |	\
+			PLL46XX_MFR_MASK << PLL46XX_MFR_SHIFT |	\
+			PLL4650C_KDIV_MASK << PLL46XX_KDIV_SHIFT);
+
+	for (i = 0; i < ARRAY_SIZE(vpll_div); i++) {
+		if (vpll_div[i][0] == rate) {
+			vpll_con0 |= vpll_div[i][1] << PLL46XX_PDIV_SHIFT;
+			vpll_con0 |= vpll_div[i][2] << PLL46XX_MDIV_SHIFT;
+			vpll_con0 |= vpll_div[i][3] << PLL46XX_SDIV_SHIFT;
+			vpll_con1 |= vpll_div[i][4] << PLL46XX_KDIV_SHIFT;
+			vpll_con1 |= vpll_div[i][5] << PLL46XX_MFR_SHIFT;
+			vpll_con1 |= vpll_div[i][6] << PLL46XX_MRR_SHIFT;
+			vpll_con0 |= vpll_div[i][7] << 27;
+			break;
+		}
+	}
+
+	if (i == ARRAY_SIZE(vpll_div)) {
+		printk(KERN_ERR "%s: Invalid Clock VPLL Frequency\n",
+				__func__);
+		return -EINVAL;
+	}
+
+	__raw_writel(vpll_con0, S5P_VPLL_CON0);
+	__raw_writel(vpll_con1, S5P_VPLL_CON1);
+
+	/* Wait for VPLL lock */
+	while (!(__raw_readl(S5P_VPLL_CON0) & (1 << PLL46XX_LOCKED_SHIFT)))
+		continue;
+
+	clk->rate = rate;
+	return 0;
+}
+
+static struct clk_ops exynos4_vpll_ops = {
+	.get_rate = exynos4_vpll_get_rate,
+	.set_rate = exynos4_vpll_set_rate,
+};
+
 void __init_or_cpufreq exynos4_setup_clocks(void)
 {
 	struct clk *xtal_clk;
-	unsigned long apll;
-	unsigned long mpll;
-	unsigned long epll;
-	unsigned long vpll;
+	unsigned long apll = 0;
+	unsigned long mpll = 0;
+	unsigned long epll = 0;
+	unsigned long vpll = 0;
 	unsigned long vpllsrc;
 	unsigned long xtal;
 	unsigned long armclk;
@@ -1153,18 +1388,34 @@ void __init_or_cpufreq exynos4_setup_clocks(void)
 
 	printk(KERN_DEBUG "%s: xtal is %ld\n", __func__, xtal);
 
-	apll = s5p_get_pll45xx(xtal, __raw_readl(S5P_APLL_CON0), pll_4508);
-	mpll = s5p_get_pll45xx(xtal, __raw_readl(S5P_MPLL_CON0), pll_4508);
-	epll = s5p_get_pll46xx(xtal, __raw_readl(S5P_EPLL_CON0),
-				__raw_readl(S5P_EPLL_CON1), pll_4600);
-
-	vpllsrc = clk_get_rate(&clk_vpllsrc.clk);
-	vpll = s5p_get_pll46xx(vpllsrc, __raw_readl(S5P_VPLL_CON0),
-				__raw_readl(S5P_VPLL_CON1), pll_4650);
+	if (soc_is_exynos4210()) {
+		apll = s5p_get_pll45xx(xtal, __raw_readl(S5P_APLL_CON0),
+					pll_4508);
+		mpll = s5p_get_pll45xx(xtal, __raw_readl(S5P_MPLL_CON0),
+					pll_4508);
+		epll = s5p_get_pll46xx(xtal, __raw_readl(S5P_EPLL_CON0),
+					__raw_readl(S5P_EPLL_CON1), pll_4600);
+
+		vpllsrc = clk_get_rate(&clk_vpllsrc.clk);
+		vpll = s5p_get_pll46xx(vpllsrc, __raw_readl(S5P_VPLL_CON0),
+					__raw_readl(S5P_VPLL_CON1), pll_4650c);
+	} else if (soc_is_exynos4212() || soc_is_exynos4412()) {
+		apll = s5p_get_pll35xx(xtal, __raw_readl(S5P_APLL_CON0));
+		mpll = s5p_get_pll35xx(xtal, __raw_readl(S5P_MPLL_CON0));
+		epll = s5p_get_pll36xx(xtal, __raw_readl(S5P_EPLL_CON0),
+					__raw_readl(S5P_EPLL_CON1));
+
+		vpllsrc = clk_get_rate(&clk_vpllsrc.clk);
+		vpll = s5p_get_pll36xx(vpllsrc, __raw_readl(S5P_VPLL_CON0),
+					__raw_readl(S5P_VPLL_CON1));
+	} else {
+		/* nothing */
+	}
 
 	clk_fout_apll.ops = &exynos4_fout_apll_ops;
 	clk_fout_mpll.rate = mpll;
 	clk_fout_epll.rate = epll;
+	clk_fout_vpll.ops = &exynos4_vpll_ops;
 	clk_fout_vpll.rate = vpll;
 
 	printk(KERN_INFO "EXYNOS4: PLL settings, A=%ld, M=%ld, E=%ld V=%ld",
@@ -1192,7 +1443,32 @@ void __init_or_cpufreq exynos4_setup_clocks(void)
 }
 
 static struct clk *clks[] __initdata = {
-	/* Nothing here yet */
+	&clk_sclk_hdmi27m,
+	&clk_sclk_hdmiphy,
+	&clk_sclk_usbphy0,
+	&clk_sclk_usbphy1,
+};
+
+#ifdef CONFIG_PM_SLEEP
+static int exynos4_clock_suspend(void)
+{
+	s3c_pm_do_save(exynos4_clock_save, ARRAY_SIZE(exynos4_clock_save));
+	return 0;
+}
+
+static void exynos4_clock_resume(void)
+{
+	s3c_pm_do_restore_core(exynos4_clock_save, ARRAY_SIZE(exynos4_clock_save));
+}
+
+#else
+#define exynos4_clock_suspend NULL
+#define exynos4_clock_resume NULL
+#endif
+
+struct syscore_ops exynos4_clock_syscore_ops = {
+	.suspend	= exynos4_clock_suspend,
+	.resume		= exynos4_clock_resume,
 };
 
 void __init exynos4_register_clocks(void)
@@ -1204,11 +1480,17 @@ void __init exynos4_register_clocks(void)
 	for (ptr = 0; ptr < ARRAY_SIZE(sysclks); ptr++)
 		s3c_register_clksrc(sysclks[ptr], 1);
 
+	for (ptr = 0; ptr < ARRAY_SIZE(sclk_tv); ptr++)
+		s3c_register_clksrc(sclk_tv[ptr], 1);
+
 	s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs));
 	s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks));
 
 	s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
 	s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
 
+	register_syscore_ops(&exynos4_clock_syscore_ops);
+	s3c24xx_register_clock(&dummy_apb_pclk);
+
 	s3c_pwmclk_init();
 }

arch/arm/mach-exynos4/cpu.c

@@ -28,10 +28,13 @@
 #include <plat/fimc-core.h>
 #include <plat/iic-core.h>
 #include <plat/reset.h>
+#include <plat/tv-core.h>
 
 #include <mach/regs-irq.h>
 #include <mach/regs-pmu.h>
 
+unsigned int gic_bank_offset __read_mostly;
+
 extern int combiner_init(unsigned int combiner_nr, void __iomem *base,
 			 unsigned int irq_start);
 extern void combiner_cascade_irq(unsigned int combiner_nr, unsigned int irq);
@@ -43,11 +46,6 @@ static struct map_desc exynos4_iodesc[] __initdata = {
 		.pfn		= __phys_to_pfn(EXYNOS4_PA_SYSTIMER),
 		.length		= SZ_4K,
 		.type	 	= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S5P_VA_SYSRAM,
-		.pfn		= __phys_to_pfn(EXYNOS4_PA_SYSRAM),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
 	}, {
 		.virtual	= (unsigned long)S5P_VA_CMU,
 		.pfn		= __phys_to_pfn(EXYNOS4_PA_CMU),
@@ -121,6 +119,24 @@ static struct map_desc exynos4_iodesc[] __initdata = {
 	},
 };
 
+static struct map_desc exynos4_iodesc0[] __initdata = {
+	{
+		.virtual	= (unsigned long)S5P_VA_SYSRAM,
+		.pfn		= __phys_to_pfn(EXYNOS4_PA_SYSRAM0),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	},
+};
+
+static struct map_desc exynos4_iodesc1[] __initdata = {
+	{
+		.virtual	= (unsigned long)S5P_VA_SYSRAM,
+		.pfn		= __phys_to_pfn(EXYNOS4_PA_SYSRAM1),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	},
+};
+
 static void exynos4_idle(void)
 {
 	if (!need_resched())
@@ -143,6 +159,11 @@ void __init exynos4_map_io(void)
 {
 	iotable_init(exynos4_iodesc, ARRAY_SIZE(exynos4_iodesc));
 
+	if (soc_is_exynos4210() && samsung_rev() == EXYNOS4210_REV_0)
+		iotable_init(exynos4_iodesc0, ARRAY_SIZE(exynos4_iodesc0));
+	else
+		iotable_init(exynos4_iodesc1, ARRAY_SIZE(exynos4_iodesc1));
+
 	/* initialize device information early */
 	exynos4_default_sdhci0();
 	exynos4_default_sdhci1();
@@ -162,6 +183,7 @@ void __init exynos4_map_io(void)
 	s3c_i2c2_setname("s3c2440-i2c");
 
 	s5p_fb_setname(0, "exynos4-fb");
+	s5p_hdmi_setname("exynos4-hdmi");
 }
 
 void __init exynos4_init_clocks(int xtal)
@@ -170,24 +192,37 @@ void __init exynos4_init_clocks(int xtal)
 
 	s3c24xx_register_baseclocks(xtal);
 	s5p_register_clocks(xtal);
+
+	if (soc_is_exynos4210())
+		exynos4210_register_clocks();
+	else if (soc_is_exynos4212() || soc_is_exynos4412())
+		exynos4212_register_clocks();
+
 	exynos4_register_clocks();
 	exynos4_setup_clocks();
 }
 
-static void exynos4_gic_irq_eoi(struct irq_data *d)
+static void exynos4_gic_irq_fix_base(struct irq_data *d)
 {
 	struct gic_chip_data *gic_data = irq_data_get_irq_chip_data(d);
 
 	gic_data->cpu_base = S5P_VA_GIC_CPU +
-			    (EXYNOS4_GIC_BANK_OFFSET * smp_processor_id());
+			    (gic_bank_offset * smp_processor_id());
+
+	gic_data->dist_base = S5P_VA_GIC_DIST +
+			    (gic_bank_offset * smp_processor_id());
 }
 
 void __init exynos4_init_irq(void)
 {
 	int irq;
 
-	gic_init(0, IRQ_SPI(0), S5P_VA_GIC_DIST, S5P_VA_GIC_CPU);
-	gic_arch_extn.irq_eoi = exynos4_gic_irq_eoi;
+	gic_bank_offset = soc_is_exynos4412() ? 0x4000 : 0x8000;
+
+	gic_init(0, IRQ_PPI(0), S5P_VA_GIC_DIST, S5P_VA_GIC_CPU);
+	gic_arch_extn.irq_eoi = exynos4_gic_irq_fix_base;
+	gic_arch_extn.irq_unmask = exynos4_gic_irq_fix_base;
+	gic_arch_extn.irq_mask = exynos4_gic_irq_fix_base;
 
 	for (irq = 0; irq < MAX_COMBINER_NR; irq++) {
 
@@ -223,7 +258,11 @@ static int __init exynos4_l2x0_cache_init(void)
 {
 	/* TAG, Data Latency Control: 2cycle */
 	__raw_writel(0x110, S5P_VA_L2CC + L2X0_TAG_LATENCY_CTRL);
-	__raw_writel(0x110, S5P_VA_L2CC + L2X0_DATA_LATENCY_CTRL);
+
+	if (soc_is_exynos4210())
+		__raw_writel(0x110, S5P_VA_L2CC + L2X0_DATA_LATENCY_CTRL);
+	else if (soc_is_exynos4212() || soc_is_exynos4412())
+		__raw_writel(0x120, S5P_VA_L2CC + L2X0_DATA_LATENCY_CTRL);
 
 	/* L2X0 Prefetch Control */
 	__raw_writel(0x30000007, S5P_VA_L2CC + L2X0_PREFETCH_CTRL);

arch/arm/mach-exynos4/dma.c

@@ -21,151 +21,229 @@
  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
-#include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
+#include <linux/amba/bus.h>
+#include <linux/amba/pl330.h>
 
+#include <asm/irq.h>
 #include <plat/devs.h>
 #include <plat/irqs.h>
 
 #include <mach/map.h>
 #include <mach/irqs.h>
-
-#include <plat/s3c-pl330-pdata.h>
+#include <mach/dma.h>
 
 static u64 dma_dmamask = DMA_BIT_MASK(32);
 
-static struct resource exynos4_pdma0_resource[] = {
-	[0] = {
-		.start	= EXYNOS4_PA_PDMA0,
-		.end	= EXYNOS4_PA_PDMA0 + SZ_4K,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_PDMA0,
-		.end	= IRQ_PDMA0,
-		.flags	= IORESOURCE_IRQ,
+struct dma_pl330_peri pdma0_peri[28] = {
+	{
+		.peri_id = (u8)DMACH_PCM0_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_PCM0_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_PCM2_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_PCM2_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_MSM_REQ0,
+	}, {
+		.peri_id = (u8)DMACH_MSM_REQ2,
+	}, {
+		.peri_id = (u8)DMACH_SPI0_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_SPI0_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_SPI2_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_SPI2_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_I2S0S_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_I2S0_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_I2S0_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_UART0_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_UART0_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_UART2_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_UART2_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_UART4_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_UART4_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_SLIMBUS0_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_SLIMBUS0_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_SLIMBUS2_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_SLIMBUS2_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_SLIMBUS4_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_SLIMBUS4_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_AC97_MICIN,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_AC97_PCMIN,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_AC97_PCMOUT,
+		.rqtype = MEMTODEV,
 	},
 };
 
-static struct s3c_pl330_platdata exynos4_pdma0_pdata = {
-	.peri = {
-		[0] = DMACH_PCM0_RX,
-		[1] = DMACH_PCM0_TX,
-		[2] = DMACH_PCM2_RX,
-		[3] = DMACH_PCM2_TX,
-		[4] = DMACH_MSM_REQ0,
-		[5] = DMACH_MSM_REQ2,
-		[6] = DMACH_SPI0_RX,
-		[7] = DMACH_SPI0_TX,
-		[8] = DMACH_SPI2_RX,
-		[9] = DMACH_SPI2_TX,
-		[10] = DMACH_I2S0S_TX,
-		[11] = DMACH_I2S0_RX,
-		[12] = DMACH_I2S0_TX,
-		[13] = DMACH_I2S2_RX,
-		[14] = DMACH_I2S2_TX,
-		[15] = DMACH_UART0_RX,
-		[16] = DMACH_UART0_TX,
-		[17] = DMACH_UART2_RX,
-		[18] = DMACH_UART2_TX,
-		[19] = DMACH_UART4_RX,
-		[20] = DMACH_UART4_TX,
-		[21] = DMACH_SLIMBUS0_RX,
-		[22] = DMACH_SLIMBUS0_TX,
-		[23] = DMACH_SLIMBUS2_RX,
-		[24] = DMACH_SLIMBUS2_TX,
-		[25] = DMACH_SLIMBUS4_RX,
-		[26] = DMACH_SLIMBUS4_TX,
-		[27] = DMACH_AC97_MICIN,
-		[28] = DMACH_AC97_PCMIN,
-		[29] = DMACH_AC97_PCMOUT,
-		[30] = DMACH_MAX,
-		[31] = DMACH_MAX,
-	},
+struct dma_pl330_platdata exynos4_pdma0_pdata = {
+	.nr_valid_peri = ARRAY_SIZE(pdma0_peri),
+	.peri = pdma0_peri,
 };
 
-static struct platform_device exynos4_device_pdma0 = {
-	.name		= "s3c-pl330",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(exynos4_pdma0_resource),
-	.resource	= exynos4_pdma0_resource,
-	.dev		= {
+struct amba_device exynos4_device_pdma0 = {
+	.dev = {
+		.init_name = "dma-pl330.0",
 		.dma_mask = &dma_dmamask,
 		.coherent_dma_mask = DMA_BIT_MASK(32),
 		.platform_data = &exynos4_pdma0_pdata,
 	},
+	.res = {
+		.start = EXYNOS4_PA_PDMA0,
+		.end = EXYNOS4_PA_PDMA0 + SZ_4K,
+		.flags = IORESOURCE_MEM,
+	},
+	.irq = {IRQ_PDMA0, NO_IRQ},
+	.periphid = 0x00041330,
 };
 
-static struct resource exynos4_pdma1_resource[] = {
-	[0] = {
-		.start	= EXYNOS4_PA_PDMA1,
-		.end	= EXYNOS4_PA_PDMA1 + SZ_4K,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_PDMA1,
-		.end	= IRQ_PDMA1,
-		.flags	= IORESOURCE_IRQ,
+struct dma_pl330_peri pdma1_peri[25] = {
+	{
+		.peri_id = (u8)DMACH_PCM0_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_PCM0_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_PCM1_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_PCM1_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_MSM_REQ1,
+	}, {
+		.peri_id = (u8)DMACH_MSM_REQ3,
+	}, {
+		.peri_id = (u8)DMACH_SPI1_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_SPI1_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_I2S0S_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_I2S0_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_I2S0_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_I2S1_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_I2S1_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_UART0_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_UART0_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_UART1_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_UART1_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_UART3_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_UART3_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_SLIMBUS1_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_SLIMBUS1_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_SLIMBUS3_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_SLIMBUS3_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_SLIMBUS5_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_SLIMBUS5_TX,
+		.rqtype = MEMTODEV,
 	},
 };
 
-static struct s3c_pl330_platdata exynos4_pdma1_pdata = {
-	.peri = {
-		[0] = DMACH_PCM0_RX,
-		[1] = DMACH_PCM0_TX,
-		[2] = DMACH_PCM1_RX,
-		[3] = DMACH_PCM1_TX,
-		[4] = DMACH_MSM_REQ1,
-		[5] = DMACH_MSM_REQ3,
-		[6] = DMACH_SPI1_RX,
-		[7] = DMACH_SPI1_TX,
-		[8] = DMACH_I2S0S_TX,
-		[9] = DMACH_I2S0_RX,
-		[10] = DMACH_I2S0_TX,
-		[11] = DMACH_I2S1_RX,
-		[12] = DMACH_I2S1_TX,
-		[13] = DMACH_UART0_RX,
-		[14] = DMACH_UART0_TX,
-		[15] = DMACH_UART1_RX,
-		[16] = DMACH_UART1_TX,
-		[17] = DMACH_UART3_RX,
-		[18] = DMACH_UART3_TX,
-		[19] = DMACH_SLIMBUS1_RX,
-		[20] = DMACH_SLIMBUS1_TX,
-		[21] = DMACH_SLIMBUS3_RX,
-		[22] = DMACH_SLIMBUS3_TX,
-		[23] = DMACH_SLIMBUS5_RX,
-		[24] = DMACH_SLIMBUS5_TX,
-		[25] = DMACH_SLIMBUS0AUX_RX,
-		[26] = DMACH_SLIMBUS0AUX_TX,
-		[27] = DMACH_SPDIF,
-		[28] = DMACH_MAX,
-		[29] = DMACH_MAX,
-		[30] = DMACH_MAX,
-		[31] = DMACH_MAX,
-	},
+struct dma_pl330_platdata exynos4_pdma1_pdata = {
+	.nr_valid_peri = ARRAY_SIZE(pdma1_peri),
+	.peri = pdma1_peri,
 };
 
-static struct platform_device exynos4_device_pdma1 = {
-	.name		= "s3c-pl330",
-	.id		= 1,
-	.num_resources	= ARRAY_SIZE(exynos4_pdma1_resource),
-	.resource	= exynos4_pdma1_resource,
-	.dev		= {
+struct amba_device exynos4_device_pdma1 = {
+	.dev = {
+		.init_name = "dma-pl330.1",
 		.dma_mask = &dma_dmamask,
 		.coherent_dma_mask = DMA_BIT_MASK(32),
 		.platform_data = &exynos4_pdma1_pdata,
 	},
-};
-
-static struct platform_device *exynos4_dmacs[] __initdata = {
-	&exynos4_device_pdma0,
-	&exynos4_device_pdma1,
+	.res = {
+		.start = EXYNOS4_PA_PDMA1,
+		.end = EXYNOS4_PA_PDMA1 + SZ_4K,
+		.flags = IORESOURCE_MEM,
+	},
+	.irq = {IRQ_PDMA1, NO_IRQ},
+	.periphid = 0x00041330,
 };
 
 static int __init exynos4_dma_init(void)
 {
-	platform_add_devices(exynos4_dmacs, ARRAY_SIZE(exynos4_dmacs));
+	amba_device_register(&exynos4_device_pdma0, &iomem_resource);
+	amba_device_register(&exynos4_device_pdma1, &iomem_resource);
 
 	return 0;
 }

arch/arm/mach-exynos4/include/mach/clkdev.h

@@ -1,7 +0,0 @@
-#ifndef __MACH_CLKDEV_H__
-#define __MACH_CLKDEV_H__
-
-#define __clk_get(clk) ({ 1; })
-#define __clk_put(clk) do {} while (0)
-
-#endif

arch/arm/mach-exynos4/include/mach/dma.h

@@ -20,7 +20,7 @@
 #ifndef __MACH_DMA_H
 #define __MACH_DMA_H
 
-/* This platform uses the common S3C DMA API driver for PL330 */
-#include <plat/s3c-dma-pl330.h>
+/* This platform uses the common DMA API driver for PL330 */
+#include <plat/dma-pl330.h>
 
 #endif /* __MACH_DMA_H */

arch/arm/mach-exynos4/include/mach/entry-macro.S

@@ -17,12 +17,25 @@
 		.endm
 
 		.macro  get_irqnr_preamble, base, tmp
-		ldr	\base, =gic_cpu_base_addr
+		mov	\tmp, #0
+
+		mrc	p15, 0, \base, c0, c0, 5
+		and	\base, \base, #3
+		cmp	\base, #0
+		beq	1f
+
+		ldr	\tmp, =gic_bank_offset
+		ldr	\tmp, [\tmp]
+		cmp	\base, #1
+		beq	1f
+
+		cmp	\base, #2
+		addeq	\tmp, \tmp, \tmp
+		addne	\tmp, \tmp, \tmp, LSL #1
+
+1:		ldr	\base, =gic_cpu_base_addr
 		ldr	\base, [\base]
-		mrc     p15, 0, \tmp, c0, c0, 5
-		and     \tmp, \tmp, #3
-		cmp     \tmp, #1
-		addeq   \base, \base, #EXYNOS4_GIC_BANK_OFFSET
+		add	\base, \base, \tmp
 		.endm
 
 		.macro  arch_ret_to_user, tmp1, tmp2
@@ -80,4 +93,10 @@
 		/* As above, this assumes that irqstat and base are preserved.. */
 
 		.macro test_for_ltirq, irqnr, irqstat, base, tmp
+		bic	\irqnr, \irqstat, #0x1c00
+		mov	\tmp, #0
+		cmp	\irqnr, #28
+		moveq	\tmp, #1
+		streq	\irqstat, [\base, #GIC_CPU_EOI]
+		cmp	\tmp, #0
 		.endm

arch/arm/mach-exynos4/include/mach/exynos4-clock.h

@@ -0,0 +1,43 @@
+/*
+ * linux/arch/arm/mach-exynos4/include/mach/exynos4-clock.h
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Header file for exynos4 clock support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_CLOCK_H
+#define __ASM_ARCH_CLOCK_H __FILE__
+
+#include <linux/clk.h>
+
+extern struct clk clk_sclk_hdmi27m;
+extern struct clk clk_sclk_usbphy0;
+extern struct clk clk_sclk_usbphy1;
+extern struct clk clk_sclk_hdmiphy;
+
+extern struct clksrc_clk clk_sclk_apll;
+extern struct clksrc_clk clk_mout_mpll;
+extern struct clksrc_clk clk_aclk_133;
+extern struct clksrc_clk clk_mout_epll;
+extern struct clksrc_clk clk_sclk_vpll;
+
+extern struct clk *clkset_corebus_list[];
+extern struct clksrc_sources clkset_mout_corebus;
+
+extern struct clk *clkset_aclk_top_list[];
+extern struct clksrc_sources clkset_aclk;
+
+extern struct clk *clkset_group_list[];
+extern struct clksrc_sources clkset_group;
+
+extern int exynos4_clksrc_mask_fsys_ctrl(struct clk *clk, int enable);
+extern int exynos4_clk_ip_fsys_ctrl(struct clk *clk, int enable);
+extern int exynos4_clk_ip_lcd1_ctrl(struct clk *clk, int enable);
+
+#endif /* __ASM_ARCH_CLOCK_H */

arch/arm/mach-exynos4/include/mach/i2c-hdmiphy.h

@@ -0,0 +1,16 @@
+/*
+ * Copyright (C) 2011 Samsung Electronics Co., Ltd.
+ *
+ * S5P series i2c hdmiphy helper definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef PLAT_S5P_I2C_HDMIPHY_H_
+#define PLAT_S5P_I2C_HDMIPHY_H_
+
+#define S5P_I2C_HDMIPHY_BUS_NUM		(8)
+
+#endif

arch/arm/mach-exynos4/include/mach/irqs.h

@@ -19,6 +19,8 @@
 
 #define IRQ_PPI(x)		S5P_IRQ(x+16)
 
+#define IRQ_MCT_LOCALTIMER	IRQ_PPI(12)
+
 /* SPI: Shared Peripheral Interrupt */
 
 #define IRQ_SPI(x)		S5P_IRQ(x+32)
@@ -93,7 +95,11 @@
 #define IRQ_2D			IRQ_SPI(89)
 #define IRQ_PCIE		IRQ_SPI(90)
 
+#define IRQ_MIXER		IRQ_SPI(91)
+#define IRQ_HDMI		IRQ_SPI(92)
+#define IRQ_IIC_HDMIPHY		IRQ_SPI(93)
 #define IRQ_MFC			IRQ_SPI(94)
+#define IRQ_SDO			IRQ_SPI(95)
 
 #define IRQ_AUDIO_SS		IRQ_SPI(96)
 #define IRQ_I2S0		IRQ_SPI(97)

arch/arm/mach-exynos4/include/mach/map.h

@@ -23,7 +23,8 @@
 
 #include <plat/map-s5p.h>
 
-#define EXYNOS4_PA_SYSRAM		0x02020000
+#define EXYNOS4_PA_SYSRAM0		0x02025000
+#define EXYNOS4_PA_SYSRAM1		0x02020000
 
 #define EXYNOS4_PA_FIMC0		0x11800000
 #define EXYNOS4_PA_FIMC1		0x11810000
@@ -61,7 +62,6 @@
 
 #define EXYNOS4_PA_GIC_CPU		0x10480000
 #define EXYNOS4_PA_GIC_DIST		0x10490000
-#define EXYNOS4_GIC_BANK_OFFSET		0x8000
 
 #define EXYNOS4_PA_COREPERI		0x10500000
 #define EXYNOS4_PA_TWD			0x10500600
@@ -112,6 +112,12 @@
 
 #define EXYNOS4_PA_UART			0x13800000
 
+#define EXYNOS4_PA_VP			0x12C00000
+#define EXYNOS4_PA_MIXER		0x12C10000
+#define EXYNOS4_PA_SDO			0x12C20000
+#define EXYNOS4_PA_HDMI			0x12D00000
+#define EXYNOS4_PA_IIC_HDMIPHY		0x138E0000
+
 #define EXYNOS4_PA_IIC(x)		(0x13860000 + ((x) * 0x10000))
 
 #define EXYNOS4_PA_ADC			0x13910000
@@ -161,6 +167,12 @@
 #define S5P_PA_TIMER			EXYNOS4_PA_TIMER
 #define S5P_PA_EHCI			EXYNOS4_PA_EHCI
 
+#define S5P_PA_SDO			EXYNOS4_PA_SDO
+#define S5P_PA_VP			EXYNOS4_PA_VP
+#define S5P_PA_MIXER			EXYNOS4_PA_MIXER
+#define S5P_PA_HDMI			EXYNOS4_PA_HDMI
+#define S5P_PA_IIC_HDMIPHY		EXYNOS4_PA_IIC_HDMIPHY
+
 #define SAMSUNG_PA_KEYPAD		EXYNOS4_PA_KEYPAD
 
 /* UART */

arch/arm/mach-exynos4/include/mach/pm-core.h

@@ -14,6 +14,10 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
 */
+
+#ifndef __ASM_ARCH_PM_CORE_H
+#define __ASM_ARCH_PM_CORE_H __FILE__
+
 #include <mach/regs-pmu.h>
 
 static inline void s3c_pm_debug_init_uart(void)
@@ -53,7 +57,9 @@ static inline void s3c_pm_restored_gpios(void)
 	/* nothing here yet */
 }
 
-static inline void s3c_pm_saved_gpios(void)
+static inline void samsung_pm_saved_gpios(void)
 {
 	/* nothing here yet */
 }
+
+#endif /* __ASM_ARCH_PM_CORE_H */

arch/arm/mach-exynos4/include/mach/pmu.h

@@ -13,6 +13,8 @@
 #ifndef __ASM_ARCH_PMU_H
 #define __ASM_ARCH_PMU_H __FILE__
 
+#define PMU_TABLE_END	NULL
+
 enum sys_powerdown {
 	SYS_AFTR,
 	SYS_LPA,
@@ -20,6 +22,11 @@ enum sys_powerdown {
 	NUM_SYS_POWERDOWN,
 };
 
+struct exynos4_pmu_conf {
+	void __iomem *reg;
+	unsigned int val[NUM_SYS_POWERDOWN];
+};
+
 extern void exynos4_sys_powerdown_conf(enum sys_powerdown mode);
 
 #endif /* __ASM_ARCH_PMU_H */

arch/arm/mach-exynos4/include/mach/regs-clock.h

@@ -13,6 +13,7 @@
 #ifndef __ASM_ARCH_REGS_CLOCK_H
 #define __ASM_ARCH_REGS_CLOCK_H __FILE__
 
+#include <plat/cpu.h>
 #include <mach/map.h>
 
 #define S5P_CLKREG(x)			(S5P_VA_CMU + (x))
@@ -41,12 +42,20 @@
 #define S5P_CLKSRC_G3D			S5P_CLKREG(0x0C22C)
 #define S5P_CLKSRC_IMAGE		S5P_CLKREG(0x0C230)
 #define S5P_CLKSRC_LCD0			S5P_CLKREG(0x0C234)
-#define S5P_CLKSRC_LCD1			S5P_CLKREG(0x0C238)
 #define S5P_CLKSRC_MAUDIO		S5P_CLKREG(0x0C23C)
 #define S5P_CLKSRC_FSYS			S5P_CLKREG(0x0C240)
 #define S5P_CLKSRC_PERIL0		S5P_CLKREG(0x0C250)
 #define S5P_CLKSRC_PERIL1		S5P_CLKREG(0x0C254)
 
+#define S5P_CLKSRC_MASK_TOP		S5P_CLKREG(0x0C310)
+#define S5P_CLKSRC_MASK_CAM		S5P_CLKREG(0x0C320)
+#define S5P_CLKSRC_MASK_TV		S5P_CLKREG(0x0C324)
+#define S5P_CLKSRC_MASK_LCD0		S5P_CLKREG(0x0C334)
+#define S5P_CLKSRC_MASK_MAUDIO		S5P_CLKREG(0x0C33C)
+#define S5P_CLKSRC_MASK_FSYS		S5P_CLKREG(0x0C340)
+#define S5P_CLKSRC_MASK_PERIL0		S5P_CLKREG(0x0C350)
+#define S5P_CLKSRC_MASK_PERIL1		S5P_CLKREG(0x0C354)
+
 #define S5P_CLKDIV_TOP			S5P_CLKREG(0x0C510)
 #define S5P_CLKDIV_CAM			S5P_CLKREG(0x0C520)
 #define S5P_CLKDIV_TV			S5P_CLKREG(0x0C524)
@@ -54,7 +63,6 @@
 #define S5P_CLKDIV_G3D			S5P_CLKREG(0x0C52C)
 #define S5P_CLKDIV_IMAGE		S5P_CLKREG(0x0C530)
 #define S5P_CLKDIV_LCD0			S5P_CLKREG(0x0C534)
-#define S5P_CLKDIV_LCD1			S5P_CLKREG(0x0C538)
 #define S5P_CLKDIV_MAUDIO		S5P_CLKREG(0x0C53C)
 #define S5P_CLKDIV_FSYS0		S5P_CLKREG(0x0C540)
 #define S5P_CLKDIV_FSYS1		S5P_CLKREG(0x0C544)
@@ -68,16 +76,6 @@
 #define S5P_CLKDIV_PERIL5		S5P_CLKREG(0x0C564)
 #define S5P_CLKDIV2_RATIO		S5P_CLKREG(0x0C580)
 
-#define S5P_CLKSRC_MASK_TOP		S5P_CLKREG(0x0C310)
-#define S5P_CLKSRC_MASK_CAM		S5P_CLKREG(0x0C320)
-#define S5P_CLKSRC_MASK_TV		S5P_CLKREG(0x0C324)
-#define S5P_CLKSRC_MASK_LCD0		S5P_CLKREG(0x0C334)
-#define S5P_CLKSRC_MASK_LCD1		S5P_CLKREG(0x0C338)
-#define S5P_CLKSRC_MASK_MAUDIO		S5P_CLKREG(0x0C33C)
-#define S5P_CLKSRC_MASK_FSYS		S5P_CLKREG(0x0C340)
-#define S5P_CLKSRC_MASK_PERIL0		S5P_CLKREG(0x0C350)
-#define S5P_CLKSRC_MASK_PERIL1		S5P_CLKREG(0x0C354)
-
 #define S5P_CLKDIV_STAT_TOP		S5P_CLKREG(0x0C610)
 
 #define S5P_CLKGATE_SCLKCAM		S5P_CLKREG(0x0C820)
@@ -85,13 +83,20 @@
 #define S5P_CLKGATE_IP_TV		S5P_CLKREG(0x0C924)
 #define S5P_CLKGATE_IP_MFC		S5P_CLKREG(0x0C928)
 #define S5P_CLKGATE_IP_G3D		S5P_CLKREG(0x0C92C)
-#define S5P_CLKGATE_IP_IMAGE		S5P_CLKREG(0x0C930)
+#define S5P_CLKGATE_IP_IMAGE		(soc_is_exynos4210() ? \
+					S5P_CLKREG(0x0C930) : \
+					S5P_CLKREG(0x04930))
+#define S5P_CLKGATE_IP_IMAGE_4210	S5P_CLKREG(0x0C930)
+#define S5P_CLKGATE_IP_IMAGE_4212	S5P_CLKREG(0x04930)
 #define S5P_CLKGATE_IP_LCD0		S5P_CLKREG(0x0C934)
-#define S5P_CLKGATE_IP_LCD1		S5P_CLKREG(0x0C938)
 #define S5P_CLKGATE_IP_FSYS		S5P_CLKREG(0x0C940)
 #define S5P_CLKGATE_IP_GPS		S5P_CLKREG(0x0C94C)
 #define S5P_CLKGATE_IP_PERIL		S5P_CLKREG(0x0C950)
-#define S5P_CLKGATE_IP_PERIR		S5P_CLKREG(0x0C960)
+#define S5P_CLKGATE_IP_PERIR		(soc_is_exynos4210() ? \
+					S5P_CLKREG(0x0C960) : \
+					S5P_CLKREG(0x08960))
+#define S5P_CLKGATE_IP_PERIR_4210	S5P_CLKREG(0x0C960)
+#define S5P_CLKGATE_IP_PERIR_4212	S5P_CLKREG(0x08960)
 #define S5P_CLKGATE_BLOCK		S5P_CLKREG(0x0C970)
 
 #define S5P_CLKSRC_MASK_DMC		S5P_CLKREG(0x10300)
@@ -102,11 +107,17 @@
 #define S5P_CLKGATE_IP_DMC		S5P_CLKREG(0x10900)
 
 #define S5P_APLL_LOCK			S5P_CLKREG(0x14000)
-#define S5P_MPLL_LOCK			S5P_CLKREG(0x14004)
+#define S5P_MPLL_LOCK			(soc_is_exynos4210() ? \
+					S5P_CLKREG(0x14004) :  \
+					S5P_CLKREG(0x10008))
 #define S5P_APLL_CON0			S5P_CLKREG(0x14100)
 #define S5P_APLL_CON1			S5P_CLKREG(0x14104)
-#define S5P_MPLL_CON0			S5P_CLKREG(0x14108)
-#define S5P_MPLL_CON1			S5P_CLKREG(0x1410C)
+#define S5P_MPLL_CON0			(soc_is_exynos4210() ? \
+					S5P_CLKREG(0x14108) : \
+					S5P_CLKREG(0x10108))
+#define S5P_MPLL_CON1			(soc_is_exynos4210() ? \
+					S5P_CLKREG(0x1410C) : \
+					S5P_CLKREG(0x1010C))
 
 #define S5P_CLKSRC_CPU			S5P_CLKREG(0x14200)
 #define S5P_CLKMUX_STATCPU		S5P_CLKREG(0x14400)
@@ -183,6 +194,13 @@
 #define S5P_CLKDIV_BUS_GPLR_SHIFT	(4)
 #define S5P_CLKDIV_BUS_GPLR_MASK	(0x7 << S5P_CLKDIV_BUS_GPLR_SHIFT)
 
+/* Only for EXYNOS4210 */
+
+#define S5P_CLKSRC_LCD1			S5P_CLKREG(0x0C238)
+#define S5P_CLKSRC_MASK_LCD1		S5P_CLKREG(0x0C338)
+#define S5P_CLKDIV_LCD1			S5P_CLKREG(0x0C538)
+#define S5P_CLKGATE_IP_LCD1		S5P_CLKREG(0x0C938)
+
 /* Compatibility defines and inclusion */
 
 #include <mach/regs-pmu.h>

arch/arm/mach-exynos4/include/mach/regs-mct.h

@@ -31,8 +31,9 @@
 #define EXYNOS4_MCT_G_INT_ENB		EXYNOS4_MCTREG(0x248)
 #define EXYNOS4_MCT_G_WSTAT		EXYNOS4_MCTREG(0x24C)
 
-#define EXYNOS4_MCT_L0_BASE		EXYNOS4_MCTREG(0x300)
-#define EXYNOS4_MCT_L1_BASE		EXYNOS4_MCTREG(0x400)
+#define _EXYNOS4_MCT_L_BASE		EXYNOS4_MCTREG(0x300)
+#define EXYNOS4_MCT_L_BASE(x)		(_EXYNOS4_MCT_L_BASE + (0x100 * x))
+#define EXYNOS4_MCT_L_MASK		(0xffffff00)
 
 #define MCT_L_TCNTB_OFFSET		(0x00)
 #define MCT_L_ICNTB_OFFSET		(0x08)

arch/arm/mach-exynos4/include/mach/regs-pmu.h

@@ -25,9 +25,10 @@
 
 #define S5P_USE_STANDBY_WFI0			(1 << 16)
 #define S5P_USE_STANDBY_WFI1			(1 << 17)
+#define S5P_USE_STANDBYWFI_ISP_ARM		(1 << 18)
 #define S5P_USE_STANDBY_WFE0			(1 << 24)
 #define S5P_USE_STANDBY_WFE1			(1 << 25)
-#define S5P_USE_MASK				((0x3 << 16) | (0x3 << 24))
+#define S5P_USE_STANDBYWFE_ISP_ARM		(1 << 26)
 
 #define S5P_SWRESET				S5P_PMUREG(0x0400)
 
@@ -35,15 +36,17 @@
 #define S5P_EINT_WAKEUP_MASK			S5P_PMUREG(0x0604)
 #define S5P_WAKEUP_MASK				S5P_PMUREG(0x0608)
 
-#define S5P_USBHOST_PHY_CONTROL			S5P_PMUREG(0x0708)
-#define S5P_USBHOST_PHY_ENABLE			(1 << 0)
+#define S5P_HDMI_PHY_CONTROL			S5P_PMUREG(0x0700)
+#define S5P_HDMI_PHY_ENABLE			(1 << 0)
+
+#define S5P_DAC_PHY_CONTROL			S5P_PMUREG(0x070C)
+#define S5P_DAC_PHY_ENABLE			(1 << 0)
 
 #define S5P_MIPI_DPHY_CONTROL(n)		S5P_PMUREG(0x0710 + (n) * 4)
 #define S5P_MIPI_DPHY_ENABLE			(1 << 0)
 #define S5P_MIPI_DPHY_SRESETN			(1 << 1)
 #define S5P_MIPI_DPHY_MRESETN			(1 << 2)
 
-#define S5P_PMU_SATA_PHY_CONTROL		S5P_PMUREG(0x0720)
 #define S5P_INFORM0				S5P_PMUREG(0x0800)
 #define S5P_INFORM1				S5P_PMUREG(0x0804)
 #define S5P_INFORM2				S5P_PMUREG(0x0808)
@@ -76,7 +79,6 @@
 #define S5P_CMU_CLKSTOP_MFC_LOWPWR		S5P_PMUREG(0x1148)
 #define S5P_CMU_CLKSTOP_G3D_LOWPWR		S5P_PMUREG(0x114C)
 #define S5P_CMU_CLKSTOP_LCD0_LOWPWR		S5P_PMUREG(0x1150)
-#define S5P_CMU_CLKSTOP_LCD1_LOWPWR		S5P_PMUREG(0x1154)
 #define S5P_CMU_CLKSTOP_MAUDIO_LOWPWR		S5P_PMUREG(0x1158)
 #define S5P_CMU_CLKSTOP_GPS_LOWPWR		S5P_PMUREG(0x115C)
 #define S5P_CMU_RESET_CAM_LOWPWR		S5P_PMUREG(0x1160)
@@ -84,7 +86,6 @@
 #define S5P_CMU_RESET_MFC_LOWPWR		S5P_PMUREG(0x1168)
 #define S5P_CMU_RESET_G3D_LOWPWR		S5P_PMUREG(0x116C)
 #define S5P_CMU_RESET_LCD0_LOWPWR		S5P_PMUREG(0x1170)
-#define S5P_CMU_RESET_LCD1_LOWPWR		S5P_PMUREG(0x1174)
 #define S5P_CMU_RESET_MAUDIO_LOWPWR		S5P_PMUREG(0x1178)
 #define S5P_CMU_RESET_GPS_LOWPWR		S5P_PMUREG(0x117C)
 #define S5P_TOP_BUS_LOWPWR			S5P_PMUREG(0x1180)
@@ -92,14 +93,11 @@
 #define S5P_TOP_PWR_LOWPWR			S5P_PMUREG(0x1188)
 #define S5P_LOGIC_RESET_LOWPWR			S5P_PMUREG(0x11A0)
 #define S5P_ONENAND_MEM_LOWPWR			S5P_PMUREG(0x11C0)
-#define S5P_MODIMIF_MEM_LOWPWR			S5P_PMUREG(0x11C4)
 #define S5P_G2D_ACP_MEM_LOWPWR			S5P_PMUREG(0x11C8)
 #define S5P_USBOTG_MEM_LOWPWR			S5P_PMUREG(0x11CC)
 #define S5P_HSMMC_MEM_LOWPWR			S5P_PMUREG(0x11D0)
 #define S5P_CSSYS_MEM_LOWPWR			S5P_PMUREG(0x11D4)
 #define S5P_SECSS_MEM_LOWPWR			S5P_PMUREG(0x11D8)
-#define S5P_PCIE_MEM_LOWPWR			S5P_PMUREG(0x11E0)
-#define S5P_SATA_MEM_LOWPWR			S5P_PMUREG(0x11E4)
 #define S5P_PAD_RETENTION_DRAM_LOWPWR		S5P_PMUREG(0x1200)
 #define S5P_PAD_RETENTION_MAUDIO_LOWPWR		S5P_PMUREG(0x1204)
 #define S5P_PAD_RETENTION_GPIO_LOWPWR		S5P_PMUREG(0x1220)
@@ -120,7 +118,6 @@
 #define S5P_MFC_LOWPWR				S5P_PMUREG(0x1388)
 #define S5P_G3D_LOWPWR				S5P_PMUREG(0x138C)
 #define S5P_LCD0_LOWPWR				S5P_PMUREG(0x1390)
-#define S5P_LCD1_LOWPWR				S5P_PMUREG(0x1394)
 #define S5P_MAUDIO_LOWPWR			S5P_PMUREG(0x1398)
 #define S5P_GPS_LOWPWR				S5P_PMUREG(0x139C)
 #define S5P_GPS_ALIVE_LOWPWR			S5P_PMUREG(0x13A0)
@@ -156,7 +153,6 @@
 #define S5P_PMU_MFC_CONF			S5P_PMUREG(0x3C40)
 #define S5P_PMU_G3D_CONF			S5P_PMUREG(0x3C60)
 #define S5P_PMU_LCD0_CONF			S5P_PMUREG(0x3C80)
-#define S5P_PMU_LCD1_CONF			S5P_PMUREG(0x3CA0)
 #define S5P_PMU_GPS_CONF			S5P_PMUREG(0x3CE0)
 
 #define S5P_PMU_SATA_PHY_CONTROL_EN		0x1
@@ -165,4 +161,60 @@
 
 #define S5P_CHECK_SLEEP				0x00000BAD
 
+/* Only for EXYNOS4210 */
+#define S5P_USBHOST_PHY_CONTROL		S5P_PMUREG(0x0708)
+#define S5P_USBHOST_PHY_ENABLE		(1 << 0)
+
+#define S5P_PMU_SATA_PHY_CONTROL	S5P_PMUREG(0x0720)
+
+#define S5P_CMU_CLKSTOP_LCD1_LOWPWR	S5P_PMUREG(0x1154)
+#define S5P_CMU_RESET_LCD1_LOWPWR	S5P_PMUREG(0x1174)
+#define S5P_MODIMIF_MEM_LOWPWR		S5P_PMUREG(0x11C4)
+#define S5P_PCIE_MEM_LOWPWR		S5P_PMUREG(0x11E0)
+#define S5P_SATA_MEM_LOWPWR		S5P_PMUREG(0x11E4)
+#define S5P_LCD1_LOWPWR			S5P_PMUREG(0x1394)
+
+#define S5P_PMU_LCD1_CONF		S5P_PMUREG(0x3CA0)
+
+/* Only for EXYNOS4212 */
+#define S5P_ISP_ARM_LOWPWR			S5P_PMUREG(0x1050)
+#define S5P_DIS_IRQ_ISP_ARM_LOCAL_LOWPWR	S5P_PMUREG(0x1054)
+#define S5P_DIS_IRQ_ISP_ARM_CENTRAL_LOWPWR	S5P_PMUREG(0x1058)
+#define S5P_CMU_ACLKSTOP_COREBLK_LOWPWR		S5P_PMUREG(0x1110)
+#define S5P_CMU_SCLKSTOP_COREBLK_LOWPWR		S5P_PMUREG(0x1114)
+#define S5P_CMU_RESET_COREBLK_LOWPWR		S5P_PMUREG(0x111C)
+#define S5P_MPLLUSER_SYSCLK_LOWPWR		S5P_PMUREG(0x1130)
+#define S5P_CMU_CLKSTOP_ISP_LOWPWR		S5P_PMUREG(0x1154)
+#define S5P_CMU_RESET_ISP_LOWPWR		S5P_PMUREG(0x1174)
+#define S5P_TOP_BUS_COREBLK_LOWPWR		S5P_PMUREG(0x1190)
+#define S5P_TOP_RETENTION_COREBLK_LOWPWR	S5P_PMUREG(0x1194)
+#define S5P_TOP_PWR_COREBLK_LOWPWR		S5P_PMUREG(0x1198)
+#define S5P_OSCCLK_GATE_LOWPWR			S5P_PMUREG(0x11A4)
+#define S5P_LOGIC_RESET_COREBLK_LOWPWR		S5P_PMUREG(0x11B0)
+#define S5P_OSCCLK_GATE_COREBLK_LOWPWR		S5P_PMUREG(0x11B4)
+#define S5P_HSI_MEM_LOWPWR			S5P_PMUREG(0x11C4)
+#define S5P_ROTATOR_MEM_LOWPWR			S5P_PMUREG(0x11DC)
+#define S5P_PAD_RETENTION_GPIO_COREBLK_LOWPWR	S5P_PMUREG(0x123C)
+#define S5P_PAD_ISOLATION_COREBLK_LOWPWR	S5P_PMUREG(0x1250)
+#define S5P_GPIO_MODE_COREBLK_LOWPWR		S5P_PMUREG(0x1320)
+#define S5P_TOP_ASB_RESET_LOWPWR		S5P_PMUREG(0x1344)
+#define S5P_TOP_ASB_ISOLATION_LOWPWR		S5P_PMUREG(0x1348)
+#define S5P_ISP_LOWPWR				S5P_PMUREG(0x1394)
+#define S5P_DRAM_FREQ_DOWN_LOWPWR		S5P_PMUREG(0x13B0)
+#define S5P_DDRPHY_DLLOFF_LOWPWR		S5P_PMUREG(0x13B4)
+#define S5P_CMU_SYSCLK_ISP_LOWPWR		S5P_PMUREG(0x13B8)
+#define S5P_CMU_SYSCLK_GPS_LOWPWR		S5P_PMUREG(0x13BC)
+#define S5P_LPDDR_PHY_DLL_LOCK_LOWPWR		S5P_PMUREG(0x13C0)
+
+#define S5P_ARM_L2_0_OPTION			S5P_PMUREG(0x2608)
+#define S5P_ARM_L2_1_OPTION			S5P_PMUREG(0x2628)
+#define S5P_ONENAND_MEM_OPTION			S5P_PMUREG(0x2E08)
+#define S5P_HSI_MEM_OPTION			S5P_PMUREG(0x2E28)
+#define S5P_G2D_ACP_MEM_OPTION			S5P_PMUREG(0x2E48)
+#define S5P_USBOTG_MEM_OPTION			S5P_PMUREG(0x2E68)
+#define S5P_HSMMC_MEM_OPTION			S5P_PMUREG(0x2E88)
+#define S5P_CSSYS_MEM_OPTION			S5P_PMUREG(0x2EA8)
+#define S5P_SECSS_MEM_OPTION			S5P_PMUREG(0x2EC8)
+#define S5P_ROTATOR_MEM_OPTION			S5P_PMUREG(0x2F48)
+
 #endif /* __ASM_ARCH_REGS_PMU_H */

arch/arm/mach-exynos4/mach-nuri.c

@@ -32,10 +32,12 @@
 #include <asm/mach-types.h>
 
 #include <plat/adc.h>
+#include <plat/regs-fb-v4.h>
 #include <plat/regs-serial.h>
 #include <plat/exynos4.h>
 #include <plat/cpu.h>
 #include <plat/devs.h>
+#include <plat/fb.h>
 #include <plat/sdhci.h>
 #include <plat/ehci.h>
 #include <plat/clock.h>
@@ -199,6 +201,33 @@ static struct platform_device nuri_gpio_keys = {
 	},
 };
 
+/* Frame Buffer */
+static struct s3c_fb_pd_win nuri_fb_win0 = {
+	.win_mode = {
+		.left_margin	= 64,
+		.right_margin	= 16,
+		.upper_margin	= 64,
+		.lower_margin	= 1,
+		.hsync_len	= 48,
+		.vsync_len	= 3,
+		.xres		= 1280,
+		.yres		= 800,
+		.refresh	= 60,
+	},
+	.max_bpp	= 24,
+	.default_bpp	= 16,
+	.virtual_x	= 1280,
+	.virtual_y	= 800,
+};
+
+static struct s3c_fb_platdata nuri_fb_pdata __initdata = {
+	.win[0]		= &nuri_fb_win0,
+	.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB |
+			  VIDCON0_CLKSEL_LCD,
+	.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
+	.setup_gpio	= exynos4_fimd0_gpio_setup_24bpp,
+};
+
 static void nuri_lcd_power_on(struct plat_lcd_data *pd, unsigned int power)
 {
 	int gpio = EXYNOS4_GPE1(5);
@@ -1092,6 +1121,7 @@ static struct platform_device *nuri_devices[] __initdata = {
 	/* Samsung Platform Devices */
 	&s3c_device_i2c5, /* PMIC should initialize first */
 	&emmc_fixed_voltage,
+	&s5p_device_fimd0,
 	&s3c_device_hsmmc0,
 	&s3c_device_hsmmc2,
 	&s3c_device_hsmmc3,
@@ -1106,6 +1136,7 @@ static struct platform_device *nuri_devices[] __initdata = {
 	&s5p_device_mfc_l,
 	&s5p_device_mfc_r,
 	&exynos4_device_pd[PD_MFC],
+	&exynos4_device_pd[PD_LCD0],
 
 	/* NURI Devices */
 	&nuri_gpio_keys,
@@ -1142,12 +1173,15 @@ static void __init nuri_machine_init(void)
 	i2c9_devs[I2C9_MAX17042].irq = gpio_to_irq(EXYNOS4_GPX2(3));
 	i2c_register_board_info(9, i2c9_devs, ARRAY_SIZE(i2c9_devs));
 
+	s5p_fimd0_set_platdata(&nuri_fb_pdata);
+
 	nuri_ehci_init();
 	clk_xusbxti.rate = 24000000;
 
 	/* Last */
 	platform_add_devices(nuri_devices, ARRAY_SIZE(nuri_devices));
 	s5p_device_mfc.dev.parent = &exynos4_device_pd[PD_MFC].dev;
+	s5p_device_fimd0.dev.parent = &exynos4_device_pd[PD_LCD0].dev;
 }
 
 MACHINE_START(NURI, "NURI")

arch/arm/mach-exynos4/mach-origen.c

@@ -0,0 +1,679 @@
+/* linux/arch/arm/mach-exynos4/mach-origen.c
+ *
+ * Copyright (c) 2011 Insignal Co., Ltd.
+ *		http://www.insignal.co.kr/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/serial_core.h>
+#include <linux/gpio.h>
+#include <linux/mmc/host.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/input.h>
+#include <linux/pwm_backlight.h>
+#include <linux/gpio_keys.h>
+#include <linux/i2c.h>
+#include <linux/regulator/machine.h>
+#include <linux/mfd/max8997.h>
+#include <linux/lcd.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+
+#include <video/platform_lcd.h>
+
+#include <plat/regs-serial.h>
+#include <plat/regs-fb-v4.h>
+#include <plat/exynos4.h>
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/sdhci.h>
+#include <plat/iic.h>
+#include <plat/ehci.h>
+#include <plat/clock.h>
+#include <plat/gpio-cfg.h>
+#include <plat/backlight.h>
+#include <plat/pd.h>
+#include <plat/fb.h>
+
+#include <mach/map.h>
+
+/* Following are default values for UCON, ULCON and UFCON UART registers */
+#define ORIGEN_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
+				 S3C2410_UCON_RXILEVEL |	\
+				 S3C2410_UCON_TXIRQMODE |	\
+				 S3C2410_UCON_RXIRQMODE |	\
+				 S3C2410_UCON_RXFIFO_TOI |	\
+				 S3C2443_UCON_RXERR_IRQEN)
+
+#define ORIGEN_ULCON_DEFAULT	S3C2410_LCON_CS8
+
+#define ORIGEN_UFCON_DEFAULT	(S3C2410_UFCON_FIFOMODE |	\
+				 S5PV210_UFCON_TXTRIG4 |	\
+				 S5PV210_UFCON_RXTRIG4)
+
+static struct s3c2410_uartcfg origen_uartcfgs[] __initdata = {
+	[0] = {
+		.hwport		= 0,
+		.flags		= 0,
+		.ucon		= ORIGEN_UCON_DEFAULT,
+		.ulcon		= ORIGEN_ULCON_DEFAULT,
+		.ufcon		= ORIGEN_UFCON_DEFAULT,
+	},
+	[1] = {
+		.hwport		= 1,
+		.flags		= 0,
+		.ucon		= ORIGEN_UCON_DEFAULT,
+		.ulcon		= ORIGEN_ULCON_DEFAULT,
+		.ufcon		= ORIGEN_UFCON_DEFAULT,
+	},
+	[2] = {
+		.hwport		= 2,
+		.flags		= 0,
+		.ucon		= ORIGEN_UCON_DEFAULT,
+		.ulcon		= ORIGEN_ULCON_DEFAULT,
+		.ufcon		= ORIGEN_UFCON_DEFAULT,
+	},
+	[3] = {
+		.hwport		= 3,
+		.flags		= 0,
+		.ucon		= ORIGEN_UCON_DEFAULT,
+		.ulcon		= ORIGEN_ULCON_DEFAULT,
+		.ufcon		= ORIGEN_UFCON_DEFAULT,
+	},
+};
+
+static struct regulator_consumer_supply __initdata ldo3_consumer[] = {
+	REGULATOR_SUPPLY("vdd11", "s5p-mipi-csis.0"), /* MIPI */
+};
+static struct regulator_consumer_supply __initdata ldo6_consumer[] = {
+	REGULATOR_SUPPLY("vdd18", "s5p-mipi-csis.0"), /* MIPI */
+};
+static struct regulator_consumer_supply __initdata ldo7_consumer[] = {
+	REGULATOR_SUPPLY("avdd", "alc5625"), /* Realtek ALC5625 */
+};
+static struct regulator_consumer_supply __initdata ldo8_consumer[] = {
+	REGULATOR_SUPPLY("vdd", "s5p-adc"), /* ADC */
+};
+static struct regulator_consumer_supply __initdata ldo9_consumer[] = {
+	REGULATOR_SUPPLY("dvdd", "swb-a31"), /* AR6003 WLAN & CSR 8810 BT */
+};
+static struct regulator_consumer_supply __initdata ldo11_consumer[] = {
+	REGULATOR_SUPPLY("dvdd", "alc5625"), /* Realtek ALC5625 */
+};
+static struct regulator_consumer_supply __initdata ldo14_consumer[] = {
+	REGULATOR_SUPPLY("avdd18", "swb-a31"), /* AR6003 WLAN & CSR 8810 BT */
+};
+static struct regulator_consumer_supply __initdata ldo17_consumer[] = {
+	REGULATOR_SUPPLY("vdd33", "swb-a31"), /* AR6003 WLAN & CSR 8810 BT */
+};
+static struct regulator_consumer_supply __initdata buck1_consumer[] = {
+	REGULATOR_SUPPLY("vdd_arm", NULL), /* CPUFREQ */
+};
+static struct regulator_consumer_supply __initdata buck2_consumer[] = {
+	REGULATOR_SUPPLY("vdd_int", NULL), /* CPUFREQ */
+};
+static struct regulator_consumer_supply __initdata buck3_consumer[] = {
+	REGULATOR_SUPPLY("vdd_g3d", "mali_drm"), /* G3D */
+};
+static struct regulator_consumer_supply __initdata buck7_consumer[] = {
+	REGULATOR_SUPPLY("vcc", "platform-lcd"), /* LCD */
+};
+
+static struct regulator_init_data __initdata max8997_ldo1_data = {
+	.constraints	= {
+		.name		= "VDD_ABB_3.3V",
+		.min_uV		= 3300000,
+		.max_uV		= 3300000,
+		.apply_uV	= 1,
+		.state_mem	= {
+			.disabled	= 1,
+		},
+	},
+};
+
+static struct regulator_init_data __initdata max8997_ldo2_data	= {
+	.constraints	= {
+		.name		= "VDD_ALIVE_1.1V",
+		.min_uV		= 1100000,
+		.max_uV		= 1100000,
+		.apply_uV	= 1,
+		.always_on	= 1,
+		.state_mem	= {
+			.enabled	= 1,
+		},
+	},
+};
+
+static struct regulator_init_data __initdata max8997_ldo3_data = {
+	.constraints	= {
+		.name		= "VMIPI_1.1V",
+		.min_uV		= 1100000,
+		.max_uV		= 1100000,
+		.apply_uV	= 1,
+		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
+		.state_mem	= {
+			.disabled	= 1,
+		},
+	},
+	.num_consumer_supplies	= ARRAY_SIZE(ldo3_consumer),
+	.consumer_supplies	= ldo3_consumer,
+};
+
+static struct regulator_init_data __initdata max8997_ldo4_data = {
+	.constraints	= {
+		.name		= "VDD_RTC_1.8V",
+		.min_uV		= 1800000,
+		.max_uV		= 1800000,
+		.apply_uV	= 1,
+		.always_on	= 1,
+		.state_mem	= {
+			.disabled	= 1,
+		},
+	},
+};
+
+static struct regulator_init_data __initdata max8997_ldo6_data = {
+	.constraints	= {
+		.name		= "VMIPI_1.8V",
+		.min_uV		= 1800000,
+		.max_uV		= 1800000,
+		.apply_uV	= 1,
+		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
+		.state_mem	= {
+			.disabled	= 1,
+		},
+	},
+	.num_consumer_supplies	= ARRAY_SIZE(ldo6_consumer),
+	.consumer_supplies	= ldo6_consumer,
+};
+
+static struct regulator_init_data __initdata max8997_ldo7_data = {
+	.constraints	= {
+		.name		= "VDD_AUD_1.8V",
+		.min_uV		= 1800000,
+		.max_uV		= 1800000,
+		.apply_uV	= 1,
+		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
+		.state_mem	= {
+			.disabled	= 1,
+		},
+	},
+	.num_consumer_supplies	= ARRAY_SIZE(ldo7_consumer),
+	.consumer_supplies	= ldo7_consumer,
+};
+
+static struct regulator_init_data __initdata max8997_ldo8_data = {
+	.constraints	= {
+		.name		= "VADC_3.3V",
+		.min_uV		= 3300000,
+		.max_uV		= 3300000,
+		.apply_uV	= 1,
+		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
+		.state_mem	= {
+			.disabled	= 1,
+		},
+	},
+	.num_consumer_supplies	= ARRAY_SIZE(ldo8_consumer),
+	.consumer_supplies	= ldo8_consumer,
+};
+
+static struct regulator_init_data __initdata max8997_ldo9_data = {
+	.constraints	= {
+		.name		= "DVDD_SWB_2.8V",
+		.min_uV		= 2800000,
+		.max_uV		= 2800000,
+		.apply_uV	= 1,
+		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
+		.state_mem	= {
+			.disabled	= 1,
+		},
+	},
+	.num_consumer_supplies	= ARRAY_SIZE(ldo9_consumer),
+	.consumer_supplies	= ldo9_consumer,
+};
+
+static struct regulator_init_data __initdata max8997_ldo10_data = {
+	.constraints	= {
+		.name		= "VDD_PLL_1.1V",
+		.min_uV		= 1100000,
+		.max_uV		= 1100000,
+		.apply_uV	= 1,
+		.always_on	= 1,
+		.state_mem	= {
+			.disabled	= 1,
+		},
+	},
+};
+
+static struct regulator_init_data __initdata max8997_ldo11_data = {
+	.constraints	= {
+		.name		= "VDD_AUD_3V",
+		.min_uV		= 3000000,
+		.max_uV		= 3000000,
+		.apply_uV	= 1,
+		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
+		.state_mem	= {
+			.disabled	= 1,
+		},
+	},
+	.num_consumer_supplies	= ARRAY_SIZE(ldo11_consumer),
+	.consumer_supplies	= ldo11_consumer,
+};
+
+static struct regulator_init_data __initdata max8997_ldo14_data = {
+	.constraints	= {
+		.name		= "AVDD18_SWB_1.8V",
+		.min_uV		= 1800000,
+		.max_uV		= 1800000,
+		.apply_uV	= 1,
+		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
+		.state_mem	= {
+			.disabled	= 1,
+		},
+	},
+	.num_consumer_supplies	= ARRAY_SIZE(ldo14_consumer),
+	.consumer_supplies	= ldo14_consumer,
+};
+
+static struct regulator_init_data __initdata max8997_ldo17_data = {
+	.constraints	= {
+		.name		= "VDD_SWB_3.3V",
+		.min_uV		= 3300000,
+		.max_uV		= 3300000,
+		.apply_uV	= 1,
+		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
+		.state_mem	= {
+			.disabled	= 1,
+		},
+	},
+	.num_consumer_supplies	= ARRAY_SIZE(ldo17_consumer),
+	.consumer_supplies	= ldo17_consumer,
+};
+
+static struct regulator_init_data __initdata max8997_ldo21_data = {
+	.constraints	= {
+		.name		= "VDD_MIF_1.2V",
+		.min_uV		= 1200000,
+		.max_uV		= 1200000,
+		.apply_uV	= 1,
+		.always_on	= 1,
+		.state_mem	= {
+			.disabled	= 1,
+		},
+	},
+};
+
+static struct regulator_init_data __initdata max8997_buck1_data = {
+	.constraints	= {
+		.name		= "VDD_ARM_1.2V",
+		.min_uV		= 950000,
+		.max_uV		= 1350000,
+		.always_on	= 1,
+		.boot_on	= 1,
+		.valid_ops_mask	= REGULATOR_CHANGE_VOLTAGE,
+		.state_mem	= {
+			.disabled	= 1,
+		},
+	},
+	.num_consumer_supplies	= ARRAY_SIZE(buck1_consumer),
+	.consumer_supplies	= buck1_consumer,
+};
+
+static struct regulator_init_data __initdata max8997_buck2_data = {
+	.constraints	= {
+		.name		= "VDD_INT_1.1V",
+		.min_uV		= 900000,
+		.max_uV		= 1100000,
+		.always_on	= 1,
+		.boot_on	= 1,
+		.valid_ops_mask	= REGULATOR_CHANGE_VOLTAGE,
+		.state_mem	= {
+			.disabled	= 1,
+		},
+	},
+	.num_consumer_supplies	= ARRAY_SIZE(buck2_consumer),
+	.consumer_supplies	= buck2_consumer,
+};
+
+static struct regulator_init_data __initdata max8997_buck3_data = {
+	.constraints	= {
+		.name		= "VDD_G3D_1.1V",
+		.min_uV		= 900000,
+		.max_uV		= 1100000,
+		.valid_ops_mask	= REGULATOR_CHANGE_VOLTAGE |
+					REGULATOR_CHANGE_STATUS,
+		.state_mem	= {
+			.disabled	= 1,
+		},
+	},
+	.num_consumer_supplies	= ARRAY_SIZE(buck3_consumer),
+	.consumer_supplies	= buck3_consumer,
+};
+
+static struct regulator_init_data __initdata max8997_buck5_data = {
+	.constraints	= {
+		.name		= "VDDQ_M1M2_1.2V",
+		.min_uV		= 1200000,
+		.max_uV		= 1200000,
+		.apply_uV	= 1,
+		.always_on	= 1,
+		.state_mem	= {
+			.disabled	= 1,
+		},
+	},
+};
+
+static struct regulator_init_data __initdata max8997_buck7_data = {
+	.constraints	= {
+		.name		= "VDD_LCD_3.3V",
+		.min_uV		= 3300000,
+		.max_uV		= 3300000,
+		.boot_on	= 1,
+		.apply_uV	= 1,
+		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
+		.state_mem	= {
+			.disabled	= 1
+		},
+	},
+	.num_consumer_supplies	= ARRAY_SIZE(buck7_consumer),
+	.consumer_supplies	= buck7_consumer,
+};
+
+static struct max8997_regulator_data __initdata origen_max8997_regulators[] = {
+	{ MAX8997_LDO1,		&max8997_ldo1_data },
+	{ MAX8997_LDO2,		&max8997_ldo2_data },
+	{ MAX8997_LDO3,		&max8997_ldo3_data },
+	{ MAX8997_LDO4,		&max8997_ldo4_data },
+	{ MAX8997_LDO6,		&max8997_ldo6_data },
+	{ MAX8997_LDO7,		&max8997_ldo7_data },
+	{ MAX8997_LDO8,		&max8997_ldo8_data },
+	{ MAX8997_LDO9,		&max8997_ldo9_data },
+	{ MAX8997_LDO10,	&max8997_ldo10_data },
+	{ MAX8997_LDO11,	&max8997_ldo11_data },
+	{ MAX8997_LDO14,	&max8997_ldo14_data },
+	{ MAX8997_LDO17,	&max8997_ldo17_data },
+	{ MAX8997_LDO21,	&max8997_ldo21_data },
+	{ MAX8997_BUCK1,	&max8997_buck1_data },
+	{ MAX8997_BUCK2,	&max8997_buck2_data },
+	{ MAX8997_BUCK3,	&max8997_buck3_data },
+	{ MAX8997_BUCK5,	&max8997_buck5_data },
+	{ MAX8997_BUCK7,	&max8997_buck7_data },
+};
+
+struct max8997_platform_data __initdata origen_max8997_pdata = {
+	.num_regulators = ARRAY_SIZE(origen_max8997_regulators),
+	.regulators	= origen_max8997_regulators,
+
+	.wakeup	= true,
+	.buck1_gpiodvs	= false,
+	.buck2_gpiodvs	= false,
+	.buck5_gpiodvs	= false,
+	.irq_base	= IRQ_GPIO_END + 1,
+
+	.ignore_gpiodvs_side_effect = true,
+	.buck125_default_idx = 0x0,
+
+	.buck125_gpios[0]	= EXYNOS4_GPX0(0),
+	.buck125_gpios[1]	= EXYNOS4_GPX0(1),
+	.buck125_gpios[2]	= EXYNOS4_GPX0(2),
+
+	.buck1_voltage[0]	= 1350000,
+	.buck1_voltage[1]	= 1300000,
+	.buck1_voltage[2]	= 1250000,
+	.buck1_voltage[3]	= 1200000,
+	.buck1_voltage[4]	= 1150000,
+	.buck1_voltage[5]	= 1100000,
+	.buck1_voltage[6]	= 1000000,
+	.buck1_voltage[7]	= 950000,
+
+	.buck2_voltage[0]	= 1100000,
+	.buck2_voltage[1]	= 1100000,
+	.buck2_voltage[2]	= 1100000,
+	.buck2_voltage[3]	= 1100000,
+	.buck2_voltage[4]	= 1000000,
+	.buck2_voltage[5]	= 1000000,
+	.buck2_voltage[6]	= 1000000,
+	.buck2_voltage[7]	= 1000000,
+
+	.buck5_voltage[0]	= 1200000,
+	.buck5_voltage[1]	= 1200000,
+	.buck5_voltage[2]	= 1200000,
+	.buck5_voltage[3]	= 1200000,
+	.buck5_voltage[4]	= 1200000,
+	.buck5_voltage[5]	= 1200000,
+	.buck5_voltage[6]	= 1200000,
+	.buck5_voltage[7]	= 1200000,
+};
+
+/* I2C0 */
+static struct i2c_board_info i2c0_devs[] __initdata = {
+	{
+		I2C_BOARD_INFO("max8997", (0xCC >> 1)),
+		.platform_data	= &origen_max8997_pdata,
+		.irq		= IRQ_EINT(4),
+	},
+};
+
+static struct s3c_sdhci_platdata origen_hsmmc0_pdata __initdata = {
+	.cd_type		= S3C_SDHCI_CD_INTERNAL,
+	.clk_type		= S3C_SDHCI_CLK_DIV_EXTERNAL,
+};
+
+static struct s3c_sdhci_platdata origen_hsmmc2_pdata __initdata = {
+	.cd_type		= S3C_SDHCI_CD_INTERNAL,
+	.clk_type		= S3C_SDHCI_CLK_DIV_EXTERNAL,
+};
+
+/* USB EHCI */
+static struct s5p_ehci_platdata origen_ehci_pdata;
+
+static void __init origen_ehci_init(void)
+{
+	struct s5p_ehci_platdata *pdata = &origen_ehci_pdata;
+
+	s5p_ehci_set_platdata(pdata);
+}
+
+static struct gpio_keys_button origen_gpio_keys_table[] = {
+	{
+		.code			= KEY_MENU,
+		.gpio			= EXYNOS4_GPX1(5),
+		.desc			= "gpio-keys: KEY_MENU",
+		.type			= EV_KEY,
+		.active_low		= 1,
+		.wakeup			= 1,
+		.debounce_interval	= 1,
+	}, {
+		.code			= KEY_HOME,
+		.gpio			= EXYNOS4_GPX1(6),
+		.desc			= "gpio-keys: KEY_HOME",
+		.type			= EV_KEY,
+		.active_low		= 1,
+		.wakeup			= 1,
+		.debounce_interval	= 1,
+	}, {
+		.code			= KEY_BACK,
+		.gpio			= EXYNOS4_GPX1(7),
+		.desc			= "gpio-keys: KEY_BACK",
+		.type			= EV_KEY,
+		.active_low		= 1,
+		.wakeup			= 1,
+		.debounce_interval	= 1,
+	}, {
+		.code			= KEY_UP,
+		.gpio			= EXYNOS4_GPX2(0),
+		.desc			= "gpio-keys: KEY_UP",
+		.type			= EV_KEY,
+		.active_low		= 1,
+		.wakeup			= 1,
+		.debounce_interval	= 1,
+	}, {
+		.code			= KEY_DOWN,
+		.gpio			= EXYNOS4_GPX2(1),
+		.desc			= "gpio-keys: KEY_DOWN",
+		.type			= EV_KEY,
+		.active_low		= 1,
+		.wakeup			= 1,
+		.debounce_interval	= 1,
+	},
+};
+
+static struct gpio_keys_platform_data origen_gpio_keys_data = {
+	.buttons	= origen_gpio_keys_table,
+	.nbuttons	= ARRAY_SIZE(origen_gpio_keys_table),
+};
+
+static struct platform_device origen_device_gpiokeys = {
+	.name		= "gpio-keys",
+	.dev		= {
+		.platform_data	= &origen_gpio_keys_data,
+	},
+};
+
+static void lcd_hv070wsa_set_power(struct plat_lcd_data *pd, unsigned int power)
+{
+	int ret;
+
+	if (power)
+		ret = gpio_request_one(EXYNOS4_GPE3(4),
+					GPIOF_OUT_INIT_HIGH, "GPE3_4");
+	else
+		ret = gpio_request_one(EXYNOS4_GPE3(4),
+					GPIOF_OUT_INIT_LOW, "GPE3_4");
+
+	gpio_free(EXYNOS4_GPE3(4));
+
+	if (ret)
+		pr_err("failed to request gpio for LCD power: %d\n", ret);
+}
+
+static struct plat_lcd_data origen_lcd_hv070wsa_data = {
+	.set_power = lcd_hv070wsa_set_power,
+};
+
+static struct platform_device origen_lcd_hv070wsa = {
+	.name			= "platform-lcd",
+	.dev.parent		= &s5p_device_fimd0.dev,
+	.dev.platform_data	= &origen_lcd_hv070wsa_data,
+};
+
+static struct s3c_fb_pd_win origen_fb_win0 = {
+	.win_mode = {
+		.left_margin	= 64,
+		.right_margin	= 16,
+		.upper_margin	= 64,
+		.lower_margin	= 16,
+		.hsync_len	= 48,
+		.vsync_len	= 3,
+		.xres		= 1024,
+		.yres		= 600,
+	},
+	.max_bpp		= 32,
+	.default_bpp		= 24,
+};
+
+static struct s3c_fb_platdata origen_lcd_pdata __initdata = {
+	.win[0]		= &origen_fb_win0,
+	.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
+	.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
+	.setup_gpio	= exynos4_fimd0_gpio_setup_24bpp,
+};
+
+static struct platform_device *origen_devices[] __initdata = {
+	&s3c_device_hsmmc2,
+	&s3c_device_hsmmc0,
+	&s3c_device_i2c0,
+	&s3c_device_rtc,
+	&s3c_device_wdt,
+	&s5p_device_ehci,
+	&s5p_device_fimc0,
+	&s5p_device_fimc1,
+	&s5p_device_fimc2,
+	&s5p_device_fimc3,
+	&s5p_device_fimd0,
+	&s5p_device_hdmi,
+	&s5p_device_i2c_hdmiphy,
+	&s5p_device_mixer,
+	&exynos4_device_pd[PD_LCD0],
+	&exynos4_device_pd[PD_TV],
+	&origen_device_gpiokeys,
+	&origen_lcd_hv070wsa,
+};
+
+/* LCD Backlight data */
+static struct samsung_bl_gpio_info origen_bl_gpio_info = {
+	.no		= EXYNOS4_GPD0(0),
+	.func		= S3C_GPIO_SFN(2),
+};
+
+static struct platform_pwm_backlight_data origen_bl_data = {
+	.pwm_id		= 0,
+	.pwm_period_ns	= 1000,
+};
+
+static void s5p_tv_setup(void)
+{
+	/* Direct HPD to HDMI chip */
+	gpio_request_one(EXYNOS4_GPX3(7), GPIOF_IN, "hpd-plug");
+	s3c_gpio_cfgpin(EXYNOS4_GPX3(7), S3C_GPIO_SFN(0x3));
+	s3c_gpio_setpull(EXYNOS4_GPX3(7), S3C_GPIO_PULL_NONE);
+}
+
+static void __init origen_map_io(void)
+{
+	s5p_init_io(NULL, 0, S5P_VA_CHIPID);
+	s3c24xx_init_clocks(24000000);
+	s3c24xx_init_uarts(origen_uartcfgs, ARRAY_SIZE(origen_uartcfgs));
+}
+
+static void __init origen_power_init(void)
+{
+	gpio_request(EXYNOS4_GPX0(4), "PMIC_IRQ");
+	s3c_gpio_cfgpin(EXYNOS4_GPX0(4), S3C_GPIO_SFN(0xf));
+	s3c_gpio_setpull(EXYNOS4_GPX0(4), S3C_GPIO_PULL_NONE);
+}
+
+static void __init origen_machine_init(void)
+{
+	origen_power_init();
+
+	s3c_i2c0_set_platdata(NULL);
+	i2c_register_board_info(0, i2c0_devs, ARRAY_SIZE(i2c0_devs));
+
+	/*
+	 * Since sdhci instance 2 can contain a bootable media,
+	 * sdhci instance 0 is registered after instance 2.
+	 */
+	s3c_sdhci2_set_platdata(&origen_hsmmc2_pdata);
+	s3c_sdhci0_set_platdata(&origen_hsmmc0_pdata);
+
+	origen_ehci_init();
+	clk_xusbxti.rate = 24000000;
+
+	s5p_tv_setup();
+	s5p_i2c_hdmiphy_set_platdata(NULL);
+
+	s5p_fimd0_set_platdata(&origen_lcd_pdata);
+
+	platform_add_devices(origen_devices, ARRAY_SIZE(origen_devices));
+	s5p_device_fimd0.dev.parent = &exynos4_device_pd[PD_LCD0].dev;
+
+	s5p_device_hdmi.dev.parent = &exynos4_device_pd[PD_TV].dev;
+	s5p_device_mixer.dev.parent = &exynos4_device_pd[PD_TV].dev;
+
+	samsung_bl_set(&origen_bl_gpio_info, &origen_bl_data);
+}
+
+MACHINE_START(ORIGEN, "ORIGEN")
+	/* Maintainer: JeongHyeon Kim <jhkim@insignal.co.kr> */
+	.atag_offset	= 0x100,
+	.init_irq	= exynos4_init_irq,
+	.map_io		= origen_map_io,
+	.init_machine	= origen_machine_init,
+	.timer		= &exynos4_timer,
+MACHINE_END

arch/arm/mach-exynos4/mach-smdk4x12.c

@@ -0,0 +1,302 @@
+/*
+ * linux/arch/arm/mach-exynos4/mach-smdk4x12.c
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/gpio.h>
+#include <linux/i2c.h>
+#include <linux/input.h>
+#include <linux/io.h>
+#include <linux/mfd/max8997.h>
+#include <linux/mmc/host.h>
+#include <linux/platform_device.h>
+#include <linux/pwm_backlight.h>
+#include <linux/regulator/machine.h>
+#include <linux/serial_core.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+
+#include <plat/backlight.h>
+#include <plat/clock.h>
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/exynos4.h>
+#include <plat/gpio-cfg.h>
+#include <plat/iic.h>
+#include <plat/keypad.h>
+#include <plat/regs-serial.h>
+#include <plat/sdhci.h>
+
+#include <mach/map.h>
+
+/* Following are default values for UCON, ULCON and UFCON UART registers */
+#define SMDK4X12_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
+				 S3C2410_UCON_RXILEVEL |	\
+				 S3C2410_UCON_TXIRQMODE |	\
+				 S3C2410_UCON_RXIRQMODE |	\
+				 S3C2410_UCON_RXFIFO_TOI |	\
+				 S3C2443_UCON_RXERR_IRQEN)
+
+#define SMDK4X12_ULCON_DEFAULT	S3C2410_LCON_CS8
+
+#define SMDK4X12_UFCON_DEFAULT	(S3C2410_UFCON_FIFOMODE |	\
+				 S5PV210_UFCON_TXTRIG4 |	\
+				 S5PV210_UFCON_RXTRIG4)
+
+static struct s3c2410_uartcfg smdk4x12_uartcfgs[] __initdata = {
+	[0] = {
+		.hwport		= 0,
+		.flags		= 0,
+		.ucon		= SMDK4X12_UCON_DEFAULT,
+		.ulcon		= SMDK4X12_ULCON_DEFAULT,
+		.ufcon		= SMDK4X12_UFCON_DEFAULT,
+	},
+	[1] = {
+		.hwport		= 1,
+		.flags		= 0,
+		.ucon		= SMDK4X12_UCON_DEFAULT,
+		.ulcon		= SMDK4X12_ULCON_DEFAULT,
+		.ufcon		= SMDK4X12_UFCON_DEFAULT,
+	},
+	[2] = {
+		.hwport		= 2,
+		.flags		= 0,
+		.ucon		= SMDK4X12_UCON_DEFAULT,
+		.ulcon		= SMDK4X12_ULCON_DEFAULT,
+		.ufcon		= SMDK4X12_UFCON_DEFAULT,
+	},
+	[3] = {
+		.hwport		= 3,
+		.flags		= 0,
+		.ucon		= SMDK4X12_UCON_DEFAULT,
+		.ulcon		= SMDK4X12_ULCON_DEFAULT,
+		.ufcon		= SMDK4X12_UFCON_DEFAULT,
+	},
+};
+
+static struct s3c_sdhci_platdata smdk4x12_hsmmc2_pdata __initdata = {
+	.cd_type		= S3C_SDHCI_CD_INTERNAL,
+	.clk_type		= S3C_SDHCI_CLK_DIV_EXTERNAL,
+#ifdef CONFIG_EXYNOS4_SDHCI_CH2_8BIT
+	.max_width		= 8,
+	.host_caps		= MMC_CAP_8_BIT_DATA,
+#endif
+};
+
+static struct s3c_sdhci_platdata smdk4x12_hsmmc3_pdata __initdata = {
+	.cd_type		= S3C_SDHCI_CD_INTERNAL,
+	.clk_type		= S3C_SDHCI_CLK_DIV_EXTERNAL,
+};
+
+static struct regulator_consumer_supply max8997_buck1 =
+	REGULATOR_SUPPLY("vdd_arm", NULL);
+
+static struct regulator_consumer_supply max8997_buck2 =
+	REGULATOR_SUPPLY("vdd_int", NULL);
+
+static struct regulator_consumer_supply max8997_buck3 =
+	REGULATOR_SUPPLY("vdd_g3d", NULL);
+
+static struct regulator_init_data max8997_buck1_data = {
+	.constraints	= {
+		.name		= "VDD_ARM_SMDK4X12",
+		.min_uV		= 925000,
+		.max_uV		= 1350000,
+		.always_on	= 1,
+		.valid_ops_mask	= REGULATOR_CHANGE_VOLTAGE,
+		.state_mem	= {
+			.disabled	= 1,
+		},
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &max8997_buck1,
+};
+
+static struct regulator_init_data max8997_buck2_data = {
+	.constraints	= {
+		.name		= "VDD_INT_SMDK4X12",
+		.min_uV		= 950000,
+		.max_uV		= 1150000,
+		.always_on	= 1,
+		.valid_ops_mask	= REGULATOR_CHANGE_VOLTAGE,
+		.state_mem	= {
+			.disabled	= 1,
+		},
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &max8997_buck2,
+};
+
+static struct regulator_init_data max8997_buck3_data = {
+	.constraints	= {
+		.name		= "VDD_G3D_SMDK4X12",
+		.min_uV		= 950000,
+		.max_uV		= 1150000,
+		.valid_ops_mask	= REGULATOR_CHANGE_VOLTAGE |
+				  REGULATOR_CHANGE_STATUS,
+		.state_mem	= {
+			.disabled	= 1,
+		},
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &max8997_buck3,
+};
+
+static struct max8997_regulator_data smdk4x12_max8997_regulators[] = {
+	{ MAX8997_BUCK1, &max8997_buck1_data },
+	{ MAX8997_BUCK2, &max8997_buck2_data },
+	{ MAX8997_BUCK3, &max8997_buck3_data },
+};
+
+static struct max8997_platform_data smdk4x12_max8997_pdata = {
+	.num_regulators	= ARRAY_SIZE(smdk4x12_max8997_regulators),
+	.regulators	= smdk4x12_max8997_regulators,
+
+	.buck1_voltage[0] = 1100000,	/* 1.1V */
+	.buck1_voltage[1] = 1100000,	/* 1.1V */
+	.buck1_voltage[2] = 1100000,	/* 1.1V */
+	.buck1_voltage[3] = 1100000,	/* 1.1V */
+	.buck1_voltage[4] = 1100000,	/* 1.1V */
+	.buck1_voltage[5] = 1100000,	/* 1.1V */
+	.buck1_voltage[6] = 1000000,	/* 1.0V */
+	.buck1_voltage[7] = 950000,	/* 0.95V */
+
+	.buck2_voltage[0] = 1100000,	/* 1.1V */
+	.buck2_voltage[1] = 1000000,	/* 1.0V */
+	.buck2_voltage[2] = 950000,	/* 0.95V */
+	.buck2_voltage[3] = 900000,	/* 0.9V */
+	.buck2_voltage[4] = 1100000,	/* 1.1V */
+	.buck2_voltage[5] = 1000000,	/* 1.0V */
+	.buck2_voltage[6] = 950000,	/* 0.95V */
+	.buck2_voltage[7] = 900000,	/* 0.9V */
+
+	.buck5_voltage[0] = 1100000,	/* 1.1V */
+	.buck5_voltage[1] = 1100000,	/* 1.1V */
+	.buck5_voltage[2] = 1100000,	/* 1.1V */
+	.buck5_voltage[3] = 1100000,	/* 1.1V */
+	.buck5_voltage[4] = 1100000,	/* 1.1V */
+	.buck5_voltage[5] = 1100000,	/* 1.1V */
+	.buck5_voltage[6] = 1100000,	/* 1.1V */
+	.buck5_voltage[7] = 1100000,	/* 1.1V */
+};
+
+static struct i2c_board_info smdk4x12_i2c_devs0[] __initdata = {
+	{
+		I2C_BOARD_INFO("max8997", 0x66),
+		.platform_data	= &smdk4x12_max8997_pdata,
+	}
+};
+
+static struct i2c_board_info smdk4x12_i2c_devs1[] __initdata = {
+	{ I2C_BOARD_INFO("wm8994", 0x1a), }
+};
+
+static struct i2c_board_info smdk4x12_i2c_devs3[] __initdata = {
+	/* nothing here yet */
+};
+
+static struct i2c_board_info smdk4x12_i2c_devs7[] __initdata = {
+	/* nothing here yet */
+};
+
+static struct samsung_bl_gpio_info smdk4x12_bl_gpio_info = {
+	.no = EXYNOS4_GPD0(1),
+	.func = S3C_GPIO_SFN(2),
+};
+
+static struct platform_pwm_backlight_data smdk4x12_bl_data = {
+	.pwm_id = 1,
+	.pwm_period_ns  = 1000,
+};
+
+static uint32_t smdk4x12_keymap[] __initdata = {
+	/* KEY(row, col, keycode) */
+	KEY(1, 0, KEY_D), KEY(1, 1, KEY_A), KEY(1, 2, KEY_B),
+	KEY(1, 3, KEY_E), KEY(1, 4, KEY_C)
+};
+
+static struct matrix_keymap_data smdk4x12_keymap_data __initdata = {
+	.keymap		= smdk4x12_keymap,
+	.keymap_size	= ARRAY_SIZE(smdk4x12_keymap),
+};
+
+static struct samsung_keypad_platdata smdk4x12_keypad_data __initdata = {
+	.keymap_data	= &smdk4x12_keymap_data,
+	.rows		= 2,
+	.cols		= 5,
+};
+
+static struct platform_device *smdk4x12_devices[] __initdata = {
+	&s3c_device_hsmmc2,
+	&s3c_device_hsmmc3,
+	&s3c_device_i2c0,
+	&s3c_device_i2c1,
+	&s3c_device_i2c3,
+	&s3c_device_i2c7,
+	&s3c_device_rtc,
+	&s3c_device_wdt,
+	&samsung_device_keypad,
+};
+
+static void __init smdk4x12_map_io(void)
+{
+	clk_xusbxti.rate = 24000000;
+
+	s5p_init_io(NULL, 0, S5P_VA_CHIPID);
+	s3c24xx_init_clocks(clk_xusbxti.rate);
+	s3c24xx_init_uarts(smdk4x12_uartcfgs, ARRAY_SIZE(smdk4x12_uartcfgs));
+}
+
+static void __init smdk4x12_machine_init(void)
+{
+	s3c_i2c0_set_platdata(NULL);
+	i2c_register_board_info(0, smdk4x12_i2c_devs0,
+				ARRAY_SIZE(smdk4x12_i2c_devs0));
+
+	s3c_i2c1_set_platdata(NULL);
+	i2c_register_board_info(1, smdk4x12_i2c_devs1,
+				ARRAY_SIZE(smdk4x12_i2c_devs1));
+
+	s3c_i2c3_set_platdata(NULL);
+	i2c_register_board_info(3, smdk4x12_i2c_devs3,
+				ARRAY_SIZE(smdk4x12_i2c_devs3));
+
+	s3c_i2c7_set_platdata(NULL);
+	i2c_register_board_info(7, smdk4x12_i2c_devs7,
+				ARRAY_SIZE(smdk4x12_i2c_devs7));
+
+	samsung_bl_set(&smdk4x12_bl_gpio_info, &smdk4x12_bl_data);
+
+	samsung_keypad_set_platdata(&smdk4x12_keypad_data);
+
+	s3c_sdhci2_set_platdata(&smdk4x12_hsmmc2_pdata);
+	s3c_sdhci3_set_platdata(&smdk4x12_hsmmc3_pdata);
+
+	platform_add_devices(smdk4x12_devices, ARRAY_SIZE(smdk4x12_devices));
+}
+
+MACHINE_START(SMDK4212, "SMDK4212")
+	/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
+	.atag_offset	= 0x100,
+	.init_irq	= exynos4_init_irq,
+	.map_io		= smdk4x12_map_io,
+	.init_machine	= smdk4x12_machine_init,
+	.timer		= &exynos4_timer,
+MACHINE_END
+
+MACHINE_START(SMDK4412, "SMDK4412")
+	/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
+	/* Maintainer: Changhwan Youn <chaos.youn@samsung.com> */
+	.atag_offset	= 0x100,
+	.init_irq	= exynos4_init_irq,
+	.map_io		= smdk4x12_map_io,
+	.init_machine	= smdk4x12_machine_init,
+	.timer		= &exynos4_timer,
+MACHINE_END

arch/arm/mach-exynos4/mach-smdkc210.c

@@ -1,309 +0,0 @@
-/* linux/arch/arm/mach-exynos4/mach-smdkc210.c
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/serial_core.h>
-#include <linux/delay.h>
-#include <linux/gpio.h>
-#include <linux/lcd.h>
-#include <linux/mmc/host.h>
-#include <linux/platform_device.h>
-#include <linux/smsc911x.h>
-#include <linux/io.h>
-#include <linux/i2c.h>
-#include <linux/pwm_backlight.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-
-#include <video/platform_lcd.h>
-
-#include <plat/regs-serial.h>
-#include <plat/regs-srom.h>
-#include <plat/regs-fb-v4.h>
-#include <plat/exynos4.h>
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/fb.h>
-#include <plat/sdhci.h>
-#include <plat/iic.h>
-#include <plat/pd.h>
-#include <plat/gpio-cfg.h>
-#include <plat/backlight.h>
-
-#include <mach/map.h>
-
-/* Following are default values for UCON, ULCON and UFCON UART registers */
-#define SMDKC210_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
-				 S3C2410_UCON_RXILEVEL |	\
-				 S3C2410_UCON_TXIRQMODE |	\
-				 S3C2410_UCON_RXIRQMODE |	\
-				 S3C2410_UCON_RXFIFO_TOI |	\
-				 S3C2443_UCON_RXERR_IRQEN)
-
-#define SMDKC210_ULCON_DEFAULT	S3C2410_LCON_CS8
-
-#define SMDKC210_UFCON_DEFAULT	(S3C2410_UFCON_FIFOMODE |	\
-				 S5PV210_UFCON_TXTRIG4 |	\
-				 S5PV210_UFCON_RXTRIG4)
-
-static struct s3c2410_uartcfg smdkc210_uartcfgs[] __initdata = {
-	[0] = {
-		.hwport		= 0,
-		.flags		= 0,
-		.ucon		= SMDKC210_UCON_DEFAULT,
-		.ulcon		= SMDKC210_ULCON_DEFAULT,
-		.ufcon		= SMDKC210_UFCON_DEFAULT,
-	},
-	[1] = {
-		.hwport		= 1,
-		.flags		= 0,
-		.ucon		= SMDKC210_UCON_DEFAULT,
-		.ulcon		= SMDKC210_ULCON_DEFAULT,
-		.ufcon		= SMDKC210_UFCON_DEFAULT,
-	},
-	[2] = {
-		.hwport		= 2,
-		.flags		= 0,
-		.ucon		= SMDKC210_UCON_DEFAULT,
-		.ulcon		= SMDKC210_ULCON_DEFAULT,
-		.ufcon		= SMDKC210_UFCON_DEFAULT,
-	},
-	[3] = {
-		.hwport		= 3,
-		.flags		= 0,
-		.ucon		= SMDKC210_UCON_DEFAULT,
-		.ulcon		= SMDKC210_ULCON_DEFAULT,
-		.ufcon		= SMDKC210_UFCON_DEFAULT,
-	},
-};
-
-static struct s3c_sdhci_platdata smdkc210_hsmmc0_pdata __initdata = {
-	.cd_type		= S3C_SDHCI_CD_GPIO,
-	.ext_cd_gpio		= EXYNOS4_GPK0(2),
-	.ext_cd_gpio_invert	= 1,
-	.clk_type		= S3C_SDHCI_CLK_DIV_EXTERNAL,
-#ifdef CONFIG_EXYNOS4_SDHCI_CH0_8BIT
-	.max_width		= 8,
-	.host_caps		= MMC_CAP_8_BIT_DATA,
-#endif
-};
-
-static struct s3c_sdhci_platdata smdkc210_hsmmc1_pdata __initdata = {
-	.cd_type		= S3C_SDHCI_CD_GPIO,
-	.ext_cd_gpio		= EXYNOS4_GPK0(2),
-	.ext_cd_gpio_invert	= 1,
-	.clk_type		= S3C_SDHCI_CLK_DIV_EXTERNAL,
-};
-
-static struct s3c_sdhci_platdata smdkc210_hsmmc2_pdata __initdata = {
-	.cd_type		= S3C_SDHCI_CD_GPIO,
-	.ext_cd_gpio		= EXYNOS4_GPK2(2),
-	.ext_cd_gpio_invert	= 1,
-	.clk_type		= S3C_SDHCI_CLK_DIV_EXTERNAL,
-#ifdef CONFIG_EXYNOS4_SDHCI_CH2_8BIT
-	.max_width		= 8,
-	.host_caps		= MMC_CAP_8_BIT_DATA,
-#endif
-};
-
-static struct s3c_sdhci_platdata smdkc210_hsmmc3_pdata __initdata = {
-	.cd_type		= S3C_SDHCI_CD_GPIO,
-	.ext_cd_gpio		= EXYNOS4_GPK2(2),
-	.ext_cd_gpio_invert	= 1,
-	.clk_type		= S3C_SDHCI_CLK_DIV_EXTERNAL,
-};
-
-static void lcd_lte480wv_set_power(struct plat_lcd_data *pd,
-				   unsigned int power)
-{
-	if (power) {
-#if !defined(CONFIG_BACKLIGHT_PWM)
-		gpio_request_one(EXYNOS4_GPD0(1), GPIOF_OUT_INIT_HIGH, "GPD0");
-		gpio_free(EXYNOS4_GPD0(1));
-#endif
-		/* fire nRESET on power up */
-		gpio_request(EXYNOS4_GPX0(6), "GPX0");
-
-		gpio_direction_output(EXYNOS4_GPX0(6), 1);
-		mdelay(100);
-
-		gpio_set_value(EXYNOS4_GPX0(6), 0);
-		mdelay(10);
-
-		gpio_set_value(EXYNOS4_GPX0(6), 1);
-		mdelay(10);
-
-		gpio_free(EXYNOS4_GPX0(6));
-	} else {
-#if !defined(CONFIG_BACKLIGHT_PWM)
-		gpio_request_one(EXYNOS4_GPD0(1), GPIOF_OUT_INIT_LOW, "GPD0");
-		gpio_free(EXYNOS4_GPD0(1));
-#endif
-	}
-}
-
-static struct plat_lcd_data smdkc210_lcd_lte480wv_data = {
-	.set_power		= lcd_lte480wv_set_power,
-};
-
-static struct platform_device smdkc210_lcd_lte480wv = {
-	.name			= "platform-lcd",
-	.dev.parent		= &s5p_device_fimd0.dev,
-	.dev.platform_data	= &smdkc210_lcd_lte480wv_data,
-};
-
-static struct s3c_fb_pd_win smdkc210_fb_win0 = {
-	.win_mode = {
-		.left_margin	= 13,
-		.right_margin	= 8,
-		.upper_margin	= 7,
-		.lower_margin	= 5,
-		.hsync_len	= 3,
-		.vsync_len	= 1,
-		.xres		= 800,
-		.yres		= 480,
-	},
-	.max_bpp		= 32,
-	.default_bpp		= 24,
-};
-
-static struct s3c_fb_platdata smdkc210_lcd0_pdata __initdata = {
-	.win[0]		= &smdkc210_fb_win0,
-	.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
-	.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
-	.setup_gpio	= exynos4_fimd0_gpio_setup_24bpp,
-};
-
-static struct resource smdkc210_smsc911x_resources[] = {
-	[0] = {
-		.start	= EXYNOS4_PA_SROM_BANK(1),
-		.end	= EXYNOS4_PA_SROM_BANK(1) + SZ_64K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_EINT(5),
-		.end	= IRQ_EINT(5),
-		.flags	= IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
-	},
-};
-
-static struct smsc911x_platform_config smsc9215_config = {
-	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
-	.irq_type	= SMSC911X_IRQ_TYPE_PUSH_PULL,
-	.flags		= SMSC911X_USE_16BIT | SMSC911X_FORCE_INTERNAL_PHY,
-	.phy_interface	= PHY_INTERFACE_MODE_MII,
-	.mac		= {0x00, 0x80, 0x00, 0x23, 0x45, 0x67},
-};
-
-static struct platform_device smdkc210_smsc911x = {
-	.name		= "smsc911x",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(smdkc210_smsc911x_resources),
-	.resource	= smdkc210_smsc911x_resources,
-	.dev		= {
-		.platform_data	= &smsc9215_config,
-	},
-};
-
-static struct i2c_board_info i2c_devs1[] __initdata = {
-	{I2C_BOARD_INFO("wm8994", 0x1a),},
-};
-
-static struct platform_device *smdkc210_devices[] __initdata = {
-	&s3c_device_hsmmc0,
-	&s3c_device_hsmmc1,
-	&s3c_device_hsmmc2,
-	&s3c_device_hsmmc3,
-	&s3c_device_i2c1,
-	&s3c_device_rtc,
-	&s3c_device_wdt,
-	&exynos4_device_ac97,
-	&exynos4_device_i2s0,
-	&exynos4_device_pd[PD_MFC],
-	&exynos4_device_pd[PD_G3D],
-	&exynos4_device_pd[PD_LCD0],
-	&exynos4_device_pd[PD_LCD1],
-	&exynos4_device_pd[PD_CAM],
-	&exynos4_device_pd[PD_TV],
-	&exynos4_device_pd[PD_GPS],
-	&exynos4_device_sysmmu,
-	&samsung_asoc_dma,
-	&s5p_device_fimd0,
-	&smdkc210_lcd_lte480wv,
-	&smdkc210_smsc911x,
-};
-
-static void __init smdkc210_smsc911x_init(void)
-{
-	u32 cs1;
-
-	/* configure nCS1 width to 16 bits */
-	cs1 = __raw_readl(S5P_SROM_BW) &
-		~(S5P_SROM_BW__CS_MASK << S5P_SROM_BW__NCS1__SHIFT);
-	cs1 |= ((1 << S5P_SROM_BW__DATAWIDTH__SHIFT) |
-		(1 << S5P_SROM_BW__WAITENABLE__SHIFT) |
-		(1 << S5P_SROM_BW__BYTEENABLE__SHIFT)) <<
-		S5P_SROM_BW__NCS1__SHIFT;
-	__raw_writel(cs1, S5P_SROM_BW);
-
-	/* set timing for nCS1 suitable for ethernet chip */
-	__raw_writel((0x1 << S5P_SROM_BCX__PMC__SHIFT) |
-		     (0x9 << S5P_SROM_BCX__TACP__SHIFT) |
-		     (0xc << S5P_SROM_BCX__TCAH__SHIFT) |
-		     (0x1 << S5P_SROM_BCX__TCOH__SHIFT) |
-		     (0x6 << S5P_SROM_BCX__TACC__SHIFT) |
-		     (0x1 << S5P_SROM_BCX__TCOS__SHIFT) |
-		     (0x1 << S5P_SROM_BCX__TACS__SHIFT), S5P_SROM_BC1);
-}
-
-/* LCD Backlight data */
-static struct samsung_bl_gpio_info smdkc210_bl_gpio_info = {
-	.no = EXYNOS4_GPD0(1),
-	.func = S3C_GPIO_SFN(2),
-};
-
-static struct platform_pwm_backlight_data smdkc210_bl_data = {
-	.pwm_id = 1,
-	.pwm_period_ns  = 1000,
-};
-
-static void __init smdkc210_map_io(void)
-{
-	s5p_init_io(NULL, 0, S5P_VA_CHIPID);
-	s3c24xx_init_clocks(24000000);
-	s3c24xx_init_uarts(smdkc210_uartcfgs, ARRAY_SIZE(smdkc210_uartcfgs));
-}
-
-static void __init smdkc210_machine_init(void)
-{
-	s3c_i2c1_set_platdata(NULL);
-	i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));
-
-	smdkc210_smsc911x_init();
-
-	s3c_sdhci0_set_platdata(&smdkc210_hsmmc0_pdata);
-	s3c_sdhci1_set_platdata(&smdkc210_hsmmc1_pdata);
-	s3c_sdhci2_set_platdata(&smdkc210_hsmmc2_pdata);
-	s3c_sdhci3_set_platdata(&smdkc210_hsmmc3_pdata);
-
-	samsung_bl_set(&smdkc210_bl_gpio_info, &smdkc210_bl_data);
-	s5p_fimd0_set_platdata(&smdkc210_lcd0_pdata);
-
-	platform_add_devices(smdkc210_devices, ARRAY_SIZE(smdkc210_devices));
-}
-
-MACHINE_START(SMDKC210, "SMDKC210")
-	/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
-	.boot_params	= S5P_PA_SDRAM + 0x100,
-	.init_irq	= exynos4_init_irq,
-	.map_io		= smdkc210_map_io,
-	.init_machine	= smdkc210_machine_init,
-	.timer		= &exynos4_timer,
-MACHINE_END

arch/arm/mach-exynos4/mach-smdkv310.c

@@ -9,7 +9,9 @@
 */
 
 #include <linux/serial_core.h>
+#include <linux/delay.h>
 #include <linux/gpio.h>
+#include <linux/lcd.h>
 #include <linux/mmc/host.h>
 #include <linux/platform_device.h>
 #include <linux/smsc911x.h>
@@ -21,17 +23,23 @@
 #include <asm/mach/arch.h>
 #include <asm/mach-types.h>
 
+#include <video/platform_lcd.h>
 #include <plat/regs-serial.h>
 #include <plat/regs-srom.h>
+#include <plat/regs-fb-v4.h>
 #include <plat/exynos4.h>
 #include <plat/cpu.h>
 #include <plat/devs.h>
+#include <plat/fb.h>
 #include <plat/keypad.h>
 #include <plat/sdhci.h>
 #include <plat/iic.h>
 #include <plat/pd.h>
 #include <plat/gpio-cfg.h>
 #include <plat/backlight.h>
+#include <plat/mfc.h>
+#include <plat/ehci.h>
+#include <plat/clock.h>
 
 #include <mach/map.h>
 
@@ -112,6 +120,67 @@ static struct s3c_sdhci_platdata smdkv310_hsmmc3_pdata __initdata = {
 	.clk_type		= S3C_SDHCI_CLK_DIV_EXTERNAL,
 };
 
+static void lcd_lte480wv_set_power(struct plat_lcd_data *pd,
+				   unsigned int power)
+{
+	if (power) {
+#if !defined(CONFIG_BACKLIGHT_PWM)
+		gpio_request_one(EXYNOS4_GPD0(1), GPIOF_OUT_INIT_HIGH, "GPD0");
+		gpio_free(EXYNOS4_GPD0(1));
+#endif
+		/* fire nRESET on power up */
+		gpio_request(EXYNOS4_GPX0(6), "GPX0");
+
+		gpio_direction_output(EXYNOS4_GPX0(6), 1);
+		mdelay(100);
+
+		gpio_set_value(EXYNOS4_GPX0(6), 0);
+		mdelay(10);
+
+		gpio_set_value(EXYNOS4_GPX0(6), 1);
+		mdelay(10);
+
+		gpio_free(EXYNOS4_GPX0(6));
+	} else {
+#if !defined(CONFIG_BACKLIGHT_PWM)
+		gpio_request_one(EXYNOS4_GPD0(1), GPIOF_OUT_INIT_LOW, "GPD0");
+		gpio_free(EXYNOS4_GPD0(1));
+#endif
+	}
+}
+
+static struct plat_lcd_data smdkv310_lcd_lte480wv_data = {
+	.set_power		= lcd_lte480wv_set_power,
+};
+
+static struct platform_device smdkv310_lcd_lte480wv = {
+	.name			= "platform-lcd",
+	.dev.parent		= &s5p_device_fimd0.dev,
+	.dev.platform_data	= &smdkv310_lcd_lte480wv_data,
+};
+
+static struct s3c_fb_pd_win smdkv310_fb_win0 = {
+	.win_mode = {
+		.left_margin	= 13,
+		.right_margin	= 8,
+		.upper_margin	= 7,
+		.lower_margin	= 5,
+		.hsync_len	= 3,
+		.vsync_len	= 1,
+		.xres		= 800,
+		.yres		= 480,
+	},
+	.max_bpp		= 32,
+	.default_bpp		= 24,
+};
+
+static struct s3c_fb_platdata smdkv310_lcd0_pdata __initdata = {
+	.win[0]		= &smdkv310_fb_win0,
+	.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
+	.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
+	.setup_gpio	= exynos4_fimd0_gpio_setup_24bpp,
+};
+
 static struct resource smdkv310_smsc911x_resources[] = {
 	[0] = {
 		.start	= EXYNOS4_PA_SROM_BANK(1),
@@ -166,17 +235,36 @@ static struct i2c_board_info i2c_devs1[] __initdata = {
 	{I2C_BOARD_INFO("wm8994", 0x1a),},
 };
 
+/* USB EHCI */
+static struct s5p_ehci_platdata smdkv310_ehci_pdata;
+
+static void __init smdkv310_ehci_init(void)
+{
+	struct s5p_ehci_platdata *pdata = &smdkv310_ehci_pdata;
+
+	s5p_ehci_set_platdata(pdata);
+}
+
 static struct platform_device *smdkv310_devices[] __initdata = {
 	&s3c_device_hsmmc0,
 	&s3c_device_hsmmc1,
 	&s3c_device_hsmmc2,
 	&s3c_device_hsmmc3,
 	&s3c_device_i2c1,
+	&s5p_device_i2c_hdmiphy,
 	&s3c_device_rtc,
 	&s3c_device_wdt,
+	&s5p_device_ehci,
+	&s5p_device_fimc0,
+	&s5p_device_fimc1,
+	&s5p_device_fimc2,
+	&s5p_device_fimc3,
 	&exynos4_device_ac97,
 	&exynos4_device_i2s0,
 	&samsung_device_keypad,
+	&s5p_device_mfc,
+	&s5p_device_mfc_l,
+	&s5p_device_mfc_r,
 	&exynos4_device_pd[PD_MFC],
 	&exynos4_device_pd[PD_G3D],
 	&exynos4_device_pd[PD_LCD0],
@@ -188,8 +276,12 @@ static struct platform_device *smdkv310_devices[] __initdata = {
 	&exynos4_device_sysmmu,
 	&samsung_asoc_dma,
 	&samsung_asoc_idma,
+	&s5p_device_fimd0,
+	&smdkv310_lcd_lte480wv,
 	&smdkv310_smsc911x,
 	&exynos4_device_ahci,
+	&s5p_device_hdmi,
+	&s5p_device_mixer,
 };
 
 static void __init smdkv310_smsc911x_init(void)
@@ -226,6 +318,18 @@ static struct platform_pwm_backlight_data smdkv310_bl_data = {
 	.pwm_period_ns  = 1000,
 };
 
+static void s5p_tv_setup(void)
+{
+	/* direct HPD to HDMI chip */
+	WARN_ON(gpio_request_one(EXYNOS4_GPX3(7), GPIOF_IN, "hpd-plug"));
+	s3c_gpio_cfgpin(EXYNOS4_GPX3(7), S3C_GPIO_SFN(0x3));
+	s3c_gpio_setpull(EXYNOS4_GPX3(7), S3C_GPIO_PULL_NONE);
+
+	/* setup dependencies between TV devices */
+	s5p_device_hdmi.dev.parent = &exynos4_device_pd[PD_TV].dev;
+	s5p_device_mixer.dev.parent = &exynos4_device_pd[PD_TV].dev;
+}
+
 static void __init smdkv310_map_io(void)
 {
 	s5p_init_io(NULL, 0, S5P_VA_CHIPID);
@@ -233,6 +337,11 @@ static void __init smdkv310_map_io(void)
 	s3c24xx_init_uarts(smdkv310_uartcfgs, ARRAY_SIZE(smdkv310_uartcfgs));
 }
 
+static void __init smdkv310_reserve(void)
+{
+	s5p_mfc_reserve_mem(0x43000000, 8 << 20, 0x51000000, 8 << 20);
+}
+
 static void __init smdkv310_machine_init(void)
 {
 	s3c_i2c1_set_platdata(NULL);
@@ -245,17 +354,35 @@ static void __init smdkv310_machine_init(void)
 	s3c_sdhci2_set_platdata(&smdkv310_hsmmc2_pdata);
 	s3c_sdhci3_set_platdata(&smdkv310_hsmmc3_pdata);
 
+	s5p_tv_setup();
+	s5p_i2c_hdmiphy_set_platdata(NULL);
+
 	samsung_keypad_set_platdata(&smdkv310_keypad_data);
 
 	samsung_bl_set(&smdkv310_bl_gpio_info, &smdkv310_bl_data);
+	s5p_fimd0_set_platdata(&smdkv310_lcd0_pdata);
+
+	smdkv310_ehci_init();
+	clk_xusbxti.rate = 24000000;
 
 	platform_add_devices(smdkv310_devices, ARRAY_SIZE(smdkv310_devices));
+	s5p_device_mfc.dev.parent = &exynos4_device_pd[PD_MFC].dev;
 }
 
 MACHINE_START(SMDKV310, "SMDKV310")
 	/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
 	/* Maintainer: Changhwan Youn <chaos.youn@samsung.com> */
-	.boot_params	= S5P_PA_SDRAM + 0x100,
+	.atag_offset	= 0x100,
+	.init_irq	= exynos4_init_irq,
+	.map_io		= smdkv310_map_io,
+	.init_machine	= smdkv310_machine_init,
+	.timer		= &exynos4_timer,
+	.reserve	= &smdkv310_reserve,
+MACHINE_END
+
+MACHINE_START(SMDKC210, "SMDKC210")
+	/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
+	.atag_offset	= 0x100,
 	.init_irq	= exynos4_init_irq,
 	.map_io		= smdkv310_map_io,
 	.init_machine	= smdkv310_machine_init,

arch/arm/mach-exynos4/mach-universal_c210.c

@@ -13,6 +13,7 @@
 #include <linux/i2c.h>
 #include <linux/gpio_keys.h>
 #include <linux/gpio.h>
+#include <linux/fb.h>
 #include <linux/mfd/max8998.h>
 #include <linux/regulator/machine.h>
 #include <linux/regulator/fixed.h>
@@ -31,12 +32,21 @@
 #include <plat/devs.h>
 #include <plat/iic.h>
 #include <plat/gpio-cfg.h>
+#include <plat/fb.h>
 #include <plat/mfc.h>
 #include <plat/sdhci.h>
 #include <plat/pd.h>
+#include <plat/regs-fb-v4.h>
+#include <plat/fimc-core.h>
+#include <plat/camport.h>
+#include <plat/mipi_csis.h>
 
 #include <mach/map.h>
 
+#include <media/v4l2-mediabus.h>
+#include <media/s5p_fimc.h>
+#include <media/m5mols.h>
+
 /* Following are default values for UCON, ULCON and UFCON UART registers */
 #define UNIVERSAL_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
 				 S3C2410_UCON_RXILEVEL |	\
@@ -110,6 +120,9 @@ static struct regulator_consumer_supply lp3974_buck1_consumer =
 static struct regulator_consumer_supply lp3974_buck2_consumer =
 	REGULATOR_SUPPLY("vddg3d", NULL);
 
+static struct regulator_consumer_supply lp3974_buck3_consumer =
+	REGULATOR_SUPPLY("vdet", "s5p-sdo");
+
 static struct regulator_init_data lp3974_buck1_data = {
 	.constraints	= {
 		.name		= "VINT_1.1V",
@@ -153,6 +166,8 @@ static struct regulator_init_data lp3974_buck3_data = {
 			.enabled	= 1,
 		},
 	},
+	.num_consumer_supplies = 1,
+	.consumer_supplies = &lp3974_buck3_consumer,
 };
 
 static struct regulator_init_data lp3974_buck4_data = {
@@ -181,6 +196,12 @@ static struct regulator_init_data lp3974_ldo2_data = {
 	},
 };
 
+static struct regulator_consumer_supply lp3974_ldo3_consumer[] = {
+	REGULATOR_SUPPLY("vdd", "exynos4-hdmi"),
+	REGULATOR_SUPPLY("vdd_pll", "exynos4-hdmi"),
+	REGULATOR_SUPPLY("vdd11", "s5p-mipi-csis.0"),
+};
+
 static struct regulator_init_data lp3974_ldo3_data = {
 	.constraints	= {
 		.name		= "VUSB+MIPI_1.1V",
@@ -192,6 +213,12 @@ static struct regulator_init_data lp3974_ldo3_data = {
 			.disabled	= 1,
 		},
 	},
+	.num_consumer_supplies = ARRAY_SIZE(lp3974_ldo3_consumer),
+	.consumer_supplies = lp3974_ldo3_consumer,
+};
+
+static struct regulator_consumer_supply lp3974_ldo4_consumer[] = {
+	REGULATOR_SUPPLY("vdd_osc", "exynos4-hdmi"),
 };
 
 static struct regulator_init_data lp3974_ldo4_data = {
@@ -205,6 +232,8 @@ static struct regulator_init_data lp3974_ldo4_data = {
 			.disabled	= 1,
 		},
 	},
+	.num_consumer_supplies = ARRAY_SIZE(lp3974_ldo4_consumer),
+	.consumer_supplies = lp3974_ldo4_consumer,
 };
 
 static struct regulator_init_data lp3974_ldo5_data = {
@@ -233,6 +262,10 @@ static struct regulator_init_data lp3974_ldo6_data = {
 	},
 };
 
+static struct regulator_consumer_supply lp3974_ldo7_consumer[] = {
+	REGULATOR_SUPPLY("vdd18", "s5p-mipi-csis.0"),
+};
+
 static struct regulator_init_data lp3974_ldo7_data = {
 	.constraints	= {
 		.name		= "VLCD+VMIPI_1.8V",
@@ -244,6 +277,12 @@ static struct regulator_init_data lp3974_ldo7_data = {
 			.disabled	= 1,
 		},
 	},
+	.num_consumer_supplies	= ARRAY_SIZE(lp3974_ldo7_consumer),
+	.consumer_supplies	= lp3974_ldo7_consumer,
+};
+
+static struct regulator_consumer_supply lp3974_ldo8_consumer[] = {
+	REGULATOR_SUPPLY("vdd33a_dac", "s5p-sdo"),
 };
 
 static struct regulator_init_data lp3974_ldo8_data = {
@@ -257,6 +296,8 @@ static struct regulator_init_data lp3974_ldo8_data = {
 			.disabled	= 1,
 		},
 	},
+	.num_consumer_supplies = ARRAY_SIZE(lp3974_ldo8_consumer),
+	.consumer_supplies = lp3974_ldo8_consumer,
 };
 
 static struct regulator_init_data lp3974_ldo9_data = {
@@ -286,6 +327,9 @@ static struct regulator_init_data lp3974_ldo10_data = {
 	},
 };
 
+static struct regulator_consumer_supply lp3974_ldo11_consumer =
+	REGULATOR_SUPPLY("dig_28", "0-001f");
+
 static struct regulator_init_data lp3974_ldo11_data = {
 	.constraints	= {
 		.name		= "CAM_AF_3.3V",
@@ -297,6 +341,8 @@ static struct regulator_init_data lp3974_ldo11_data = {
 			.disabled	= 1,
 		},
 	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &lp3974_ldo11_consumer,
 };
 
 static struct regulator_init_data lp3974_ldo12_data = {
@@ -325,6 +371,9 @@ static struct regulator_init_data lp3974_ldo13_data = {
 	},
 };
 
+static struct regulator_consumer_supply lp3974_ldo14_consumer =
+	REGULATOR_SUPPLY("dig_18", "0-001f");
+
 static struct regulator_init_data lp3974_ldo14_data = {
 	.constraints	= {
 		.name		= "CAM_I_HOST_1.8V",
@@ -336,8 +385,14 @@ static struct regulator_init_data lp3974_ldo14_data = {
 			.disabled	= 1,
 		},
 	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &lp3974_ldo14_consumer,
 };
 
+
+static struct regulator_consumer_supply lp3974_ldo15_consumer =
+	REGULATOR_SUPPLY("dig_12", "0-001f");
+
 static struct regulator_init_data lp3974_ldo15_data = {
 	.constraints	= {
 		.name		= "CAM_S_DIG+FM33_CORE_1.2V",
@@ -349,6 +404,12 @@ static struct regulator_init_data lp3974_ldo15_data = {
 			.disabled	= 1,
 		},
 	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &lp3974_ldo15_consumer,
+};
+
+static struct regulator_consumer_supply lp3974_ldo16_consumer[] = {
+	REGULATOR_SUPPLY("a_sensor", "0-001f"),
 };
 
 static struct regulator_init_data lp3974_ldo16_data = {
@@ -362,6 +423,8 @@ static struct regulator_init_data lp3974_ldo16_data = {
 			.disabled	= 1,
 		},
 	},
+	.num_consumer_supplies	= ARRAY_SIZE(lp3974_ldo16_consumer),
+	.consumer_supplies	= lp3974_ldo16_consumer,
 };
 
 static struct regulator_init_data lp3974_ldo17_data = {
@@ -472,6 +535,43 @@ static struct max8998_platform_data universal_lp3974_pdata = {
 	.wakeup			= true,
 };
 
+
+enum fixed_regulator_id {
+	FIXED_REG_ID_MMC0,
+	FIXED_REG_ID_HDMI_5V,
+	FIXED_REG_ID_CAM_S_IF,
+	FIXED_REG_ID_CAM_I_CORE,
+	FIXED_REG_ID_CAM_VT_DIO,
+};
+
+static struct regulator_consumer_supply hdmi_fixed_consumer =
+	REGULATOR_SUPPLY("hdmi-en", "exynos4-hdmi");
+
+static struct regulator_init_data hdmi_fixed_voltage_init_data = {
+	.constraints		= {
+		.name		= "HDMI_5V",
+		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &hdmi_fixed_consumer,
+};
+
+static struct fixed_voltage_config hdmi_fixed_voltage_config = {
+	.supply_name		= "HDMI_EN1",
+	.microvolts		= 5000000,
+	.gpio			= EXYNOS4_GPE0(1),
+	.enable_high		= true,
+	.init_data		= &hdmi_fixed_voltage_init_data,
+};
+
+static struct platform_device hdmi_fixed_voltage = {
+	.name			= "reg-fixed-voltage",
+	.id			= FIXED_REG_ID_HDMI_5V,
+	.dev			= {
+		.platform_data	= &hdmi_fixed_voltage_config,
+	},
+};
+
 /* GPIO I2C 5 (PMIC) */
 static struct i2c_board_info i2c5_devs[] __initdata = {
 	{
@@ -573,6 +673,11 @@ static void __init universal_touchkey_init(void)
 	gpio_direction_output(gpio, 1);
 }
 
+static struct s3c2410_platform_i2c universal_i2c0_platdata __initdata = {
+	.frequency	= 300 * 1000,
+	.sda_delay	= 200,
+};
+
 /* GPIO KEYS */
 static struct gpio_keys_button universal_gpio_keys_tables[] = {
 	{
@@ -658,7 +763,7 @@ static struct fixed_voltage_config mmc0_fixed_voltage_config = {
 
 static struct platform_device mmc0_fixed_voltage = {
 	.name			= "reg-fixed-voltage",
-	.id			= 0,
+	.id			= FIXED_REG_ID_MMC0,
 	.dev			= {
 		.platform_data	= &mmc0_fixed_voltage_config,
 	},
@@ -692,18 +797,170 @@ static void __init universal_sdhci_init(void)
 	s3c_sdhci3_set_platdata(&universal_hsmmc3_data);
 }
 
-/* I2C0 */
-static struct i2c_board_info i2c0_devs[] __initdata = {
-	/* Camera, To be updated */
-};
-
 /* I2C1 */
 static struct i2c_board_info i2c1_devs[] __initdata = {
 	/* Gyro, To be updated */
 };
 
+/* Frame Buffer */
+static struct s3c_fb_pd_win universal_fb_win0 = {
+	.win_mode = {
+		.left_margin	= 16,
+		.right_margin	= 16,
+		.upper_margin	= 2,
+		.lower_margin	= 28,
+		.hsync_len	= 2,
+		.vsync_len	= 1,
+		.xres		= 480,
+		.yres		= 800,
+		.refresh	= 55,
+	},
+	.max_bpp	= 32,
+	.default_bpp	= 16,
+};
+
+static struct s3c_fb_platdata universal_lcd_pdata __initdata = {
+	.win[0]		= &universal_fb_win0,
+	.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB |
+			  VIDCON0_CLKSEL_LCD,
+	.vidcon1	= VIDCON1_INV_VCLK | VIDCON1_INV_VDEN
+			  | VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
+	.setup_gpio	= exynos4_fimd0_gpio_setup_24bpp,
+};
+
+static struct regulator_consumer_supply cam_i_core_supply =
+	REGULATOR_SUPPLY("core", "0-001f");
+
+static struct regulator_init_data cam_i_core_reg_init_data = {
+	.constraints = { .valid_ops_mask = REGULATOR_CHANGE_STATUS },
+	.num_consumer_supplies = 1,
+	.consumer_supplies = &cam_i_core_supply,
+};
+
+static struct fixed_voltage_config cam_i_core_fixed_voltage_cfg = {
+	.supply_name	= "CAM_I_CORE_1.2V",
+	.microvolts	= 1200000,
+	.gpio		= EXYNOS4_GPE2(2),	/* CAM_8M_CORE_EN */
+	.enable_high	= 1,
+	.init_data	= &cam_i_core_reg_init_data,
+};
+
+static struct platform_device cam_i_core_fixed_reg_dev = {
+	.name = "reg-fixed-voltage", .id = FIXED_REG_ID_CAM_I_CORE,
+	.dev = { .platform_data	= &cam_i_core_fixed_voltage_cfg },
+};
+
+static struct regulator_consumer_supply cam_s_if_supply =
+	REGULATOR_SUPPLY("d_sensor", "0-001f");
+
+static struct regulator_init_data cam_s_if_reg_init_data = {
+	.constraints = { .valid_ops_mask = REGULATOR_CHANGE_STATUS },
+	.num_consumer_supplies = 1,
+	.consumer_supplies = &cam_s_if_supply,
+};
+
+static struct fixed_voltage_config cam_s_if_fixed_voltage_cfg = {
+	.supply_name	= "CAM_S_IF_1.8V",
+	.microvolts	= 1800000,
+	.gpio		= EXYNOS4_GPE3(0),	/* CAM_PWR_EN1 */
+	.enable_high	= 1,
+	.init_data	= &cam_s_if_reg_init_data,
+};
+
+static struct platform_device cam_s_if_fixed_reg_dev = {
+	.name = "reg-fixed-voltage", .id = FIXED_REG_ID_CAM_S_IF,
+	.dev = { .platform_data	= &cam_s_if_fixed_voltage_cfg },
+};
+
+static struct s5p_platform_mipi_csis mipi_csis_platdata = {
+	.clk_rate	= 166000000UL,
+	.lanes		= 2,
+	.alignment	= 32,
+	.hs_settle	= 12,
+	.phy_enable	= s5p_csis_phy_enable,
+};
+
+#define GPIO_CAM_LEVEL_EN(n)	EXYNOS4_GPE4(n + 3)
+#define GPIO_CAM_8M_ISP_INT	EXYNOS4_GPX1(5)	/* XEINT_13 */
+#define GPIO_CAM_MEGA_nRST	EXYNOS4_GPE2(5)
+
+static int m5mols_set_power(struct device *dev, int on)
+{
+	gpio_set_value(GPIO_CAM_LEVEL_EN(1), !on);
+	gpio_set_value(GPIO_CAM_LEVEL_EN(2), !!on);
+	return 0;
+}
+
+static struct m5mols_platform_data m5mols_platdata = {
+	.gpio_reset	= GPIO_CAM_MEGA_nRST,
+	.reset_polarity	= 0,
+	.set_power	= m5mols_set_power,
+};
+
+static struct i2c_board_info m5mols_board_info = {
+	I2C_BOARD_INFO("M5MOLS", 0x1F),
+	.platform_data = &m5mols_platdata,
+};
+
+static struct s5p_fimc_isp_info universal_camera_sensors[] = {
+	{
+		.mux_id		= 0,
+		.flags		= V4L2_MBUS_PCLK_SAMPLE_FALLING |
+				  V4L2_MBUS_VSYNC_ACTIVE_LOW,
+		.bus_type	= FIMC_MIPI_CSI2,
+		.board_info	= &m5mols_board_info,
+		.i2c_bus_num	= 0,
+		.clk_frequency	= 21600000UL,
+		.csi_data_align	= 32,
+	},
+};
+
+static struct s5p_platform_fimc fimc_md_platdata = {
+	.isp_info	= universal_camera_sensors,
+	.num_clients	= ARRAY_SIZE(universal_camera_sensors),
+};
+
+struct platform_device s5p_device_fimc_md = {
+	.name	= "s5p-fimc-md",
+	.id	= -1,
+};
+
+static struct gpio universal_camera_gpios[] = {
+	{ GPIO_CAM_LEVEL_EN(1),	GPIOF_OUT_INIT_HIGH, "CAM_LVL_EN1" },
+	{ GPIO_CAM_LEVEL_EN(2),	GPIOF_OUT_INIT_LOW,  "CAM_LVL_EN2" },
+	{ GPIO_CAM_8M_ISP_INT,	GPIOF_IN,            "8M_ISP_INT"  },
+	{ GPIO_CAM_MEGA_nRST,	GPIOF_OUT_INIT_LOW,  "CAM_8M_NRST" },
+};
+
+static void universal_camera_init(void)
+{
+	s3c_set_platdata(&mipi_csis_platdata, sizeof(mipi_csis_platdata),
+			 &s5p_device_mipi_csis0);
+	s3c_set_platdata(&fimc_md_platdata,  sizeof(fimc_md_platdata),
+			 &s5p_device_fimc_md);
+
+	if (gpio_request_array(universal_camera_gpios,
+			       ARRAY_SIZE(universal_camera_gpios))) {
+		pr_err("%s: GPIO request failed\n", __func__);
+		return;
+	}
+
+	if (!s3c_gpio_cfgpin(GPIO_CAM_8M_ISP_INT, S3C_GPIO_SFN(0xf)))
+		m5mols_board_info.irq = gpio_to_irq(GPIO_CAM_8M_ISP_INT);
+	else
+		pr_err("Failed to configure 8M_ISP_INT GPIO\n");
+
+	/* Free GPIOs controlled directly by the sensor drivers. */
+	gpio_free(GPIO_CAM_MEGA_nRST);
+	gpio_free(GPIO_CAM_8M_ISP_INT);
+
+	if (exynos4_fimc_setup_gpio(S5P_CAMPORT_A))
+		pr_err("Camera port A setup failed\n");
+}
+
 static struct platform_device *universal_devices[] __initdata = {
 	/* Samsung Platform Devices */
+	&s5p_device_mipi_csis0,
 	&s5p_device_fimc0,
 	&s5p_device_fimc1,
 	&s5p_device_fimc2,
@@ -712,17 +969,30 @@ static struct platform_device *universal_devices[] __initdata = {
 	&s3c_device_hsmmc0,
 	&s3c_device_hsmmc2,
 	&s3c_device_hsmmc3,
+	&s3c_device_i2c0,
 	&s3c_device_i2c3,
 	&s3c_device_i2c5,
+	&s5p_device_i2c_hdmiphy,
+	&hdmi_fixed_voltage,
+	&exynos4_device_pd[PD_TV],
+	&s5p_device_hdmi,
+	&s5p_device_sdo,
+	&s5p_device_mixer,
 
 	/* Universal Devices */
 	&i2c_gpio12,
 	&universal_gpio_keys,
 	&s5p_device_onenand,
+	&s5p_device_fimd0,
 	&s5p_device_mfc,
 	&s5p_device_mfc_l,
 	&s5p_device_mfc_r,
 	&exynos4_device_pd[PD_MFC],
+	&exynos4_device_pd[PD_LCD0],
+	&exynos4_device_pd[PD_CAM],
+	&cam_i_core_fixed_reg_dev,
+	&cam_s_if_fixed_reg_dev,
+	&s5p_device_fimc_md,
 };
 
 static void __init universal_map_io(void)
@@ -732,6 +1002,20 @@ static void __init universal_map_io(void)
 	s3c24xx_init_uarts(universal_uartcfgs, ARRAY_SIZE(universal_uartcfgs));
 }
 
+void s5p_tv_setup(void)
+{
+	/* direct HPD to HDMI chip */
+	gpio_request(EXYNOS4_GPX3(7), "hpd-plug");
+
+	gpio_direction_input(EXYNOS4_GPX3(7));
+	s3c_gpio_cfgpin(EXYNOS4_GPX3(7), S3C_GPIO_SFN(0x3));
+	s3c_gpio_setpull(EXYNOS4_GPX3(7), S3C_GPIO_PULL_NONE);
+
+	/* setup dependencies between TV devices */
+	s5p_device_hdmi.dev.parent = &exynos4_device_pd[PD_TV].dev;
+	s5p_device_mixer.dev.parent = &exynos4_device_pd[PD_TV].dev;
+}
+
 static void __init universal_reserve(void)
 {
 	s5p_mfc_reserve_mem(0x43000000, 8 << 20, 0x51000000, 8 << 20);
@@ -740,8 +1024,9 @@ static void __init universal_reserve(void)
 static void __init universal_machine_init(void)
 {
 	universal_sdhci_init();
+	s5p_tv_setup();
 
-	i2c_register_board_info(0, i2c0_devs, ARRAY_SIZE(i2c0_devs));
+	s3c_i2c0_set_platdata(&universal_i2c0_platdata);
 	i2c_register_board_info(1, i2c1_devs, ARRAY_SIZE(i2c1_devs));
 
 	universal_tsp_init();
@@ -749,15 +1034,28 @@ static void __init universal_machine_init(void)
 	i2c_register_board_info(3, i2c3_devs, ARRAY_SIZE(i2c3_devs));
 
 	s3c_i2c5_set_platdata(NULL);
+	s5p_i2c_hdmiphy_set_platdata(NULL);
 	i2c_register_board_info(5, i2c5_devs, ARRAY_SIZE(i2c5_devs));
 
+	s5p_fimd0_set_platdata(&universal_lcd_pdata);
+
 	universal_touchkey_init();
 	i2c_register_board_info(I2C_GPIO_BUS_12, i2c_gpio12_devs,
 			ARRAY_SIZE(i2c_gpio12_devs));
 
+	universal_camera_init();
+
 	/* Last */
 	platform_add_devices(universal_devices, ARRAY_SIZE(universal_devices));
+
 	s5p_device_mfc.dev.parent = &exynos4_device_pd[PD_MFC].dev;
+	s5p_device_fimd0.dev.parent = &exynos4_device_pd[PD_LCD0].dev;
+
+	s5p_device_fimc0.dev.parent = &exynos4_device_pd[PD_CAM].dev;
+	s5p_device_fimc1.dev.parent = &exynos4_device_pd[PD_CAM].dev;
+	s5p_device_fimc2.dev.parent = &exynos4_device_pd[PD_CAM].dev;
+	s5p_device_fimc3.dev.parent = &exynos4_device_pd[PD_CAM].dev;
+	s5p_device_mipi_csis0.dev.parent = &exynos4_device_pd[PD_CAM].dev;
 }
 
 MACHINE_START(UNIVERSAL_C210, "UNIVERSAL_C210")

arch/arm/mach-exynos4/mct.c

@@ -20,19 +20,31 @@
 #include <linux/delay.h>
 #include <linux/percpu.h>
 
+#include <asm/hardware/gic.h>
+
+#include <plat/cpu.h>
+
 #include <mach/map.h>
+#include <mach/irqs.h>
 #include <mach/regs-mct.h>
 #include <asm/mach/time.h>
 
+enum {
+	MCT_INT_SPI,
+	MCT_INT_PPI
+};
+
 static unsigned long clk_cnt_per_tick;
 static unsigned long clk_rate;
+static unsigned int mct_int_type;
 
 struct mct_clock_event_device {
 	struct clock_event_device *evt;
 	void __iomem *base;
+	char name[10];
 };
 
-struct mct_clock_event_device mct_tick[2];
+struct mct_clock_event_device mct_tick[NR_CPUS];
 
 static void exynos4_mct_write(unsigned int value, void *addr)
 {
@@ -42,57 +54,53 @@ static void exynos4_mct_write(unsigned int value, void *addr)
 
 	__raw_writel(value, addr);
 
-	switch ((u32) addr) {
-	case (u32) EXYNOS4_MCT_G_TCON:
-		stat_addr = EXYNOS4_MCT_G_WSTAT;
-		mask = 1 << 16;		/* G_TCON write status */
-		break;
-	case (u32) EXYNOS4_MCT_G_COMP0_L:
-		stat_addr = EXYNOS4_MCT_G_WSTAT;
-		mask = 1 << 0;		/* G_COMP0_L write status */
-		break;
-	case (u32) EXYNOS4_MCT_G_COMP0_U:
-		stat_addr = EXYNOS4_MCT_G_WSTAT;
-		mask = 1 << 1;		/* G_COMP0_U write status */
-		break;
-	case (u32) EXYNOS4_MCT_G_COMP0_ADD_INCR:
-		stat_addr = EXYNOS4_MCT_G_WSTAT;
-		mask = 1 << 2;		/* G_COMP0_ADD_INCR write status */
-		break;
-	case (u32) EXYNOS4_MCT_G_CNT_L:
-		stat_addr = EXYNOS4_MCT_G_CNT_WSTAT;
-		mask = 1 << 0;		/* G_CNT_L write status */
-		break;
-	case (u32) EXYNOS4_MCT_G_CNT_U:
-		stat_addr = EXYNOS4_MCT_G_CNT_WSTAT;
-		mask = 1 << 1;		/* G_CNT_U write status */
-		break;
-	case (u32)(EXYNOS4_MCT_L0_BASE + MCT_L_TCON_OFFSET):
-		stat_addr = EXYNOS4_MCT_L0_BASE + MCT_L_WSTAT_OFFSET;
-		mask = 1 << 3;		/* L0_TCON write status */
-		break;
-	case (u32)(EXYNOS4_MCT_L1_BASE + MCT_L_TCON_OFFSET):
-		stat_addr = EXYNOS4_MCT_L1_BASE + MCT_L_WSTAT_OFFSET;
-		mask = 1 << 3;		/* L1_TCON write status */
-		break;
-	case (u32)(EXYNOS4_MCT_L0_BASE + MCT_L_TCNTB_OFFSET):
-		stat_addr = EXYNOS4_MCT_L0_BASE + MCT_L_WSTAT_OFFSET;
-		mask = 1 << 0;		/* L0_TCNTB write status */
-		break;
-	case (u32)(EXYNOS4_MCT_L1_BASE + MCT_L_TCNTB_OFFSET):
-		stat_addr = EXYNOS4_MCT_L1_BASE + MCT_L_WSTAT_OFFSET;
-		mask = 1 << 0;		/* L1_TCNTB write status */
-		break;
-	case (u32)(EXYNOS4_MCT_L0_BASE + MCT_L_ICNTB_OFFSET):
-		stat_addr = EXYNOS4_MCT_L0_BASE + MCT_L_WSTAT_OFFSET;
-		mask = 1 << 1;		/* L0_ICNTB write status */
-		break;
-	case (u32)(EXYNOS4_MCT_L1_BASE + MCT_L_ICNTB_OFFSET):
-		stat_addr = EXYNOS4_MCT_L1_BASE + MCT_L_WSTAT_OFFSET;
-		mask = 1 << 1;		/* L1_ICNTB write status */
-		break;
-	default:
-		return;
+	if (likely(addr >= EXYNOS4_MCT_L_BASE(0))) {
+		u32 base = (u32) addr & EXYNOS4_MCT_L_MASK;
+		switch ((u32) addr & ~EXYNOS4_MCT_L_MASK) {
+		case (u32) MCT_L_TCON_OFFSET:
+			stat_addr = (void __iomem *) base + MCT_L_WSTAT_OFFSET;
+			mask = 1 << 3;		/* L_TCON write status */
+			break;
+		case (u32) MCT_L_ICNTB_OFFSET:
+			stat_addr = (void __iomem *) base + MCT_L_WSTAT_OFFSET;
+			mask = 1 << 1;		/* L_ICNTB write status */
+			break;
+		case (u32) MCT_L_TCNTB_OFFSET:
+			stat_addr = (void __iomem *) base + MCT_L_WSTAT_OFFSET;
+			mask = 1 << 0;		/* L_TCNTB write status */
+			break;
+		default:
+			return;
+		}
+	} else {
+		switch ((u32) addr) {
+		case (u32) EXYNOS4_MCT_G_TCON:
+			stat_addr = EXYNOS4_MCT_G_WSTAT;
+			mask = 1 << 16;		/* G_TCON write status */
+			break;
+		case (u32) EXYNOS4_MCT_G_COMP0_L:
+			stat_addr = EXYNOS4_MCT_G_WSTAT;
+			mask = 1 << 0;		/* G_COMP0_L write status */
+			break;
+		case (u32) EXYNOS4_MCT_G_COMP0_U:
+			stat_addr = EXYNOS4_MCT_G_WSTAT;
+			mask = 1 << 1;		/* G_COMP0_U write status */
+			break;
+		case (u32) EXYNOS4_MCT_G_COMP0_ADD_INCR:
+			stat_addr = EXYNOS4_MCT_G_WSTAT;
+			mask = 1 << 2;		/* G_COMP0_ADD_INCR w status */
+			break;
+		case (u32) EXYNOS4_MCT_G_CNT_L:
+			stat_addr = EXYNOS4_MCT_G_CNT_WSTAT;
+			mask = 1 << 0;		/* G_CNT_L write status */
+			break;
+		case (u32) EXYNOS4_MCT_G_CNT_U:
+			stat_addr = EXYNOS4_MCT_G_CNT_WSTAT;
+			mask = 1 << 1;		/* G_CNT_U write status */
+			break;
+		default:
+			return;
+		}
 	}
 
 	/* Wait maximum 1 ms until written values are applied */
@@ -132,12 +140,18 @@ static cycle_t exynos4_frc_read(struct clocksource *cs)
 	return ((cycle_t)hi << 32) | lo;
 }
 
+static void exynos4_frc_resume(struct clocksource *cs)
+{
+	exynos4_mct_frc_start(0, 0);
+}
+
 struct clocksource mct_frc = {
 	.name		= "mct-frc",
 	.rating		= 400,
 	.read		= exynos4_frc_read,
 	.mask		= CLOCKSOURCE_MASK(64),
 	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
+	.resume		= exynos4_frc_resume,
 };
 
 static void __init exynos4_clocksource_init(void)
@@ -315,9 +329,8 @@ static inline void exynos4_tick_set_mode(enum clock_event_mode mode,
 	}
 }
 
-static irqreturn_t exynos4_mct_tick_isr(int irq, void *dev_id)
+static int exynos4_mct_tick_clear(struct mct_clock_event_device *mevt)
 {
-	struct mct_clock_event_device *mevt = dev_id;
 	struct clock_event_device *evt = mevt->evt;
 
 	/*
@@ -329,7 +342,20 @@ static irqreturn_t exynos4_mct_tick_isr(int irq, void *dev_id)
 		exynos4_mct_tick_stop(mevt);
 
 	/* Clear the MCT tick interrupt */
-	exynos4_mct_write(0x1, mevt->base + MCT_L_INT_CSTAT_OFFSET);
+	if (__raw_readl(mevt->base + MCT_L_INT_CSTAT_OFFSET) & 1) {
+		exynos4_mct_write(0x1, mevt->base + MCT_L_INT_CSTAT_OFFSET);
+		return 1;
+	} else {
+		return 0;
+	}
+}
+
+static irqreturn_t exynos4_mct_tick_isr(int irq, void *dev_id)
+{
+	struct mct_clock_event_device *mevt = dev_id;
+	struct clock_event_device *evt = mevt->evt;
+
+	exynos4_mct_tick_clear(mevt);
 
 	evt->event_handler(evt);
 
@@ -354,14 +380,10 @@ static void exynos4_mct_tick_init(struct clock_event_device *evt)
 
 	mct_tick[cpu].evt = evt;
 
-	if (cpu == 0) {
-		mct_tick[cpu].base = EXYNOS4_MCT_L0_BASE;
-		evt->name = "mct_tick0";
-	} else {
-		mct_tick[cpu].base = EXYNOS4_MCT_L1_BASE;
-		evt->name = "mct_tick1";
-	}
+	mct_tick[cpu].base = EXYNOS4_MCT_L_BASE(cpu);
+	sprintf(mct_tick[cpu].name, "mct_tick%d", cpu);
 
+	evt->name = mct_tick[cpu].name;
 	evt->cpumask = cpumask_of(cpu);
 	evt->set_next_event = exynos4_tick_set_next_event;
 	evt->set_mode = exynos4_tick_set_mode;
@@ -378,25 +400,34 @@ static void exynos4_mct_tick_init(struct clock_event_device *evt)
 
 	exynos4_mct_write(0x1, mct_tick[cpu].base + MCT_L_TCNTB_OFFSET);
 
-	if (cpu == 0) {
-		mct_tick0_event_irq.dev_id = &mct_tick[cpu];
-		setup_irq(IRQ_MCT_L0, &mct_tick0_event_irq);
+	if (mct_int_type == MCT_INT_SPI) {
+		if (cpu == 0) {
+			mct_tick0_event_irq.dev_id = &mct_tick[cpu];
+			setup_irq(IRQ_MCT_L0, &mct_tick0_event_irq);
+		} else {
+			mct_tick1_event_irq.dev_id = &mct_tick[cpu];
+			setup_irq(IRQ_MCT_L1, &mct_tick1_event_irq);
+			irq_set_affinity(IRQ_MCT_L1, cpumask_of(1));
+		}
 	} else {
-		mct_tick1_event_irq.dev_id = &mct_tick[cpu];
-		setup_irq(IRQ_MCT_L1, &mct_tick1_event_irq);
-		irq_set_affinity(IRQ_MCT_L1, cpumask_of(1));
+		gic_enable_ppi(IRQ_MCT_LOCALTIMER);
 	}
 }
 
 /* Setup the local clock events for a CPU */
-void __cpuinit local_timer_setup(struct clock_event_device *evt)
+int __cpuinit local_timer_setup(struct clock_event_device *evt)
 {
 	exynos4_mct_tick_init(evt);
+
+	return 0;
 }
 
 int local_timer_ack(void)
 {
-	return 0;
+	unsigned int cpu = smp_processor_id();
+	struct mct_clock_event_device *mevt = &mct_tick[cpu];
+
+	return exynos4_mct_tick_clear(mevt);
 }
 
 #endif /* CONFIG_LOCAL_TIMERS */
@@ -411,6 +442,11 @@ static void __init exynos4_timer_resources(void)
 
 static void __init exynos4_timer_init(void)
 {
+	if (soc_is_exynos4210())
+		mct_int_type = MCT_INT_SPI;
+	else
+		mct_int_type = MCT_INT_PPI;
+
 	exynos4_timer_resources();
 	exynos4_clocksource_init();
 	exynos4_clockevent_init();

arch/arm/mach-exynos4/platsmp.c

@@ -30,9 +30,13 @@
 #include <mach/regs-clock.h>
 #include <mach/regs-pmu.h>
 
+#include <plat/cpu.h>
+
+extern unsigned int gic_bank_offset;
 extern void exynos4_secondary_startup(void);
 
-#define CPU1_BOOT_REG S5P_VA_SYSRAM
+#define CPU1_BOOT_REG		(samsung_rev() == EXYNOS4210_REV_1_1 ? \
+				S5P_INFORM5 : S5P_VA_SYSRAM)
 
 /*
  * control for which core is the next to come out of the secondary
@@ -64,9 +68,9 @@ static DEFINE_SPINLOCK(boot_lock);
 static void __cpuinit exynos4_gic_secondary_init(void)
 {
 	void __iomem *dist_base = S5P_VA_GIC_DIST +
-				 (EXYNOS4_GIC_BANK_OFFSET * smp_processor_id());
+				(gic_bank_offset * smp_processor_id());
 	void __iomem *cpu_base = S5P_VA_GIC_CPU +
-				(EXYNOS4_GIC_BANK_OFFSET * smp_processor_id());
+				(gic_bank_offset * smp_processor_id());
 	int i;
 
 	/*
@@ -106,6 +110,8 @@ void __cpuinit platform_secondary_init(unsigned int cpu)
 	 */
 	spin_lock(&boot_lock);
 	spin_unlock(&boot_lock);
+
+	set_cpu_online(cpu, true);
 }
 
 int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
@@ -216,5 +222,6 @@ void __init platform_smp_prepare_cpus(unsigned int max_cpus)
 	 * until it receives a soft interrupt, and then the
 	 * secondary CPU branches to this address.
 	 */
-	__raw_writel(BSYM(virt_to_phys(exynos4_secondary_startup)), S5P_VA_SYSRAM);
+	__raw_writel(BSYM(virt_to_phys(exynos4_secondary_startup)),
+			CPU1_BOOT_REG);
 }

arch/arm/mach-exynos4/pm.c

@@ -41,7 +41,6 @@ static struct sleep_save exynos4_set_clksrc[] = {
 	{ .reg = S5P_CLKSRC_MASK_CAM			, .val = 0x11111111, },
 	{ .reg = S5P_CLKSRC_MASK_TV			, .val = 0x00000111, },
 	{ .reg = S5P_CLKSRC_MASK_LCD0			, .val = 0x00001111, },
-	{ .reg = S5P_CLKSRC_MASK_LCD1			, .val = 0x00001111, },
 	{ .reg = S5P_CLKSRC_MASK_MAUDIO			, .val = 0x00000001, },
 	{ .reg = S5P_CLKSRC_MASK_FSYS			, .val = 0x01011111, },
 	{ .reg = S5P_CLKSRC_MASK_PERIL0			, .val = 0x01111111, },
@@ -49,6 +48,10 @@ static struct sleep_save exynos4_set_clksrc[] = {
 	{ .reg = S5P_CLKSRC_MASK_DMC			, .val = 0x00010000, },
 };
 
+static struct sleep_save exynos4210_set_clksrc[] = {
+	{ .reg = S5P_CLKSRC_MASK_LCD1			, .val = 0x00001111, },
+};
+
 static struct sleep_save exynos4_epll_save[] = {
 	SAVE_ITEM(S5P_EPLL_CON0),
 	SAVE_ITEM(S5P_EPLL_CON1),
@@ -60,77 +63,6 @@ static struct sleep_save exynos4_vpll_save[] = {
 };
 
 static struct sleep_save exynos4_core_save[] = {
-	/* CMU side */
-	SAVE_ITEM(S5P_CLKDIV_LEFTBUS),
-	SAVE_ITEM(S5P_CLKGATE_IP_LEFTBUS),
-	SAVE_ITEM(S5P_CLKDIV_RIGHTBUS),
-	SAVE_ITEM(S5P_CLKGATE_IP_RIGHTBUS),
-	SAVE_ITEM(S5P_CLKSRC_TOP0),
-	SAVE_ITEM(S5P_CLKSRC_TOP1),
-	SAVE_ITEM(S5P_CLKSRC_CAM),
-	SAVE_ITEM(S5P_CLKSRC_TV),
-	SAVE_ITEM(S5P_CLKSRC_MFC),
-	SAVE_ITEM(S5P_CLKSRC_G3D),
-	SAVE_ITEM(S5P_CLKSRC_IMAGE),
-	SAVE_ITEM(S5P_CLKSRC_LCD0),
-	SAVE_ITEM(S5P_CLKSRC_LCD1),
-	SAVE_ITEM(S5P_CLKSRC_MAUDIO),
-	SAVE_ITEM(S5P_CLKSRC_FSYS),
-	SAVE_ITEM(S5P_CLKSRC_PERIL0),
-	SAVE_ITEM(S5P_CLKSRC_PERIL1),
-	SAVE_ITEM(S5P_CLKDIV_CAM),
-	SAVE_ITEM(S5P_CLKDIV_TV),
-	SAVE_ITEM(S5P_CLKDIV_MFC),
-	SAVE_ITEM(S5P_CLKDIV_G3D),
-	SAVE_ITEM(S5P_CLKDIV_IMAGE),
-	SAVE_ITEM(S5P_CLKDIV_LCD0),
-	SAVE_ITEM(S5P_CLKDIV_LCD1),
-	SAVE_ITEM(S5P_CLKDIV_MAUDIO),
-	SAVE_ITEM(S5P_CLKDIV_FSYS0),
-	SAVE_ITEM(S5P_CLKDIV_FSYS1),
-	SAVE_ITEM(S5P_CLKDIV_FSYS2),
-	SAVE_ITEM(S5P_CLKDIV_FSYS3),
-	SAVE_ITEM(S5P_CLKDIV_PERIL0),
-	SAVE_ITEM(S5P_CLKDIV_PERIL1),
-	SAVE_ITEM(S5P_CLKDIV_PERIL2),
-	SAVE_ITEM(S5P_CLKDIV_PERIL3),
-	SAVE_ITEM(S5P_CLKDIV_PERIL4),
-	SAVE_ITEM(S5P_CLKDIV_PERIL5),
-	SAVE_ITEM(S5P_CLKDIV_TOP),
-	SAVE_ITEM(S5P_CLKSRC_MASK_TOP),
-	SAVE_ITEM(S5P_CLKSRC_MASK_CAM),
-	SAVE_ITEM(S5P_CLKSRC_MASK_TV),
-	SAVE_ITEM(S5P_CLKSRC_MASK_LCD0),
-	SAVE_ITEM(S5P_CLKSRC_MASK_LCD1),
-	SAVE_ITEM(S5P_CLKSRC_MASK_MAUDIO),
-	SAVE_ITEM(S5P_CLKSRC_MASK_FSYS),
-	SAVE_ITEM(S5P_CLKSRC_MASK_PERIL0),
-	SAVE_ITEM(S5P_CLKSRC_MASK_PERIL1),
-	SAVE_ITEM(S5P_CLKDIV2_RATIO),
-	SAVE_ITEM(S5P_CLKGATE_SCLKCAM),
-	SAVE_ITEM(S5P_CLKGATE_IP_CAM),
-	SAVE_ITEM(S5P_CLKGATE_IP_TV),
-	SAVE_ITEM(S5P_CLKGATE_IP_MFC),
-	SAVE_ITEM(S5P_CLKGATE_IP_G3D),
-	SAVE_ITEM(S5P_CLKGATE_IP_IMAGE),
-	SAVE_ITEM(S5P_CLKGATE_IP_LCD0),
-	SAVE_ITEM(S5P_CLKGATE_IP_LCD1),
-	SAVE_ITEM(S5P_CLKGATE_IP_FSYS),
-	SAVE_ITEM(S5P_CLKGATE_IP_GPS),
-	SAVE_ITEM(S5P_CLKGATE_IP_PERIL),
-	SAVE_ITEM(S5P_CLKGATE_IP_PERIR),
-	SAVE_ITEM(S5P_CLKGATE_BLOCK),
-	SAVE_ITEM(S5P_CLKSRC_MASK_DMC),
-	SAVE_ITEM(S5P_CLKSRC_DMC),
-	SAVE_ITEM(S5P_CLKDIV_DMC0),
-	SAVE_ITEM(S5P_CLKDIV_DMC1),
-	SAVE_ITEM(S5P_CLKGATE_IP_DMC),
-	SAVE_ITEM(S5P_CLKSRC_CPU),
-	SAVE_ITEM(S5P_CLKDIV_CPU),
-	SAVE_ITEM(S5P_CLKDIV_CPU + 0x4),
-	SAVE_ITEM(S5P_CLKGATE_SCLKCPU),
-	SAVE_ITEM(S5P_CLKGATE_IP_CPU),
-
 	/* GIC side */
 	SAVE_ITEM(S5P_VA_GIC_CPU + 0x000),
 	SAVE_ITEM(S5P_VA_GIC_CPU + 0x004),
@@ -268,6 +200,9 @@ static void exynos4_pm_prepare(void)
 
 	s3c_pm_do_restore_core(exynos4_set_clksrc, ARRAY_SIZE(exynos4_set_clksrc));
 
+	if (soc_is_exynos4210())
+		s3c_pm_do_restore_core(exynos4210_set_clksrc, ARRAY_SIZE(exynos4210_set_clksrc));
+
 }
 
 static int exynos4_pm_add(struct sys_device *sysdev)
@@ -404,6 +339,13 @@ static int exynos4_pm_suspend(void)
 	tmp &= ~S5P_CENTRAL_LOWPWR_CFG;
 	__raw_writel(tmp, S5P_CENTRAL_SEQ_CONFIGURATION);
 
+	if (soc_is_exynos4212()) {
+		tmp = __raw_readl(S5P_CENTRAL_SEQ_OPTION);
+		tmp &= ~(S5P_USE_STANDBYWFI_ISP_ARM |
+			 S5P_USE_STANDBYWFE_ISP_ARM);
+		__raw_writel(tmp, S5P_CENTRAL_SEQ_OPTION);
+	}
+
 	/* Save Power control register */
 	asm ("mrc p15, 0, %0, c15, c0, 0"
 	     : "=r" (tmp) : : "cc");

arch/arm/mach-exynos4/pmu.c

@@ -16,160 +16,215 @@
 #include <mach/regs-clock.h>
 #include <mach/pmu.h>
 
-static void __iomem *sys_powerdown_reg[] = {
-	S5P_ARM_CORE0_LOWPWR,
-	S5P_DIS_IRQ_CORE0,
-	S5P_DIS_IRQ_CENTRAL0,
-	S5P_ARM_CORE1_LOWPWR,
-	S5P_DIS_IRQ_CORE1,
-	S5P_DIS_IRQ_CENTRAL1,
-	S5P_ARM_COMMON_LOWPWR,
-	S5P_L2_0_LOWPWR,
-	S5P_L2_1_LOWPWR,
-	S5P_CMU_ACLKSTOP_LOWPWR,
-	S5P_CMU_SCLKSTOP_LOWPWR,
-	S5P_CMU_RESET_LOWPWR,
-	S5P_APLL_SYSCLK_LOWPWR,
-	S5P_MPLL_SYSCLK_LOWPWR,
-	S5P_VPLL_SYSCLK_LOWPWR,
-	S5P_EPLL_SYSCLK_LOWPWR,
-	S5P_CMU_CLKSTOP_GPS_ALIVE_LOWPWR,
-	S5P_CMU_RESET_GPSALIVE_LOWPWR,
-	S5P_CMU_CLKSTOP_CAM_LOWPWR,
-	S5P_CMU_CLKSTOP_TV_LOWPWR,
-	S5P_CMU_CLKSTOP_MFC_LOWPWR,
-	S5P_CMU_CLKSTOP_G3D_LOWPWR,
-	S5P_CMU_CLKSTOP_LCD0_LOWPWR,
-	S5P_CMU_CLKSTOP_LCD1_LOWPWR,
-	S5P_CMU_CLKSTOP_MAUDIO_LOWPWR,
-	S5P_CMU_CLKSTOP_GPS_LOWPWR,
-	S5P_CMU_RESET_CAM_LOWPWR,
-	S5P_CMU_RESET_TV_LOWPWR,
-	S5P_CMU_RESET_MFC_LOWPWR,
-	S5P_CMU_RESET_G3D_LOWPWR,
-	S5P_CMU_RESET_LCD0_LOWPWR,
-	S5P_CMU_RESET_LCD1_LOWPWR,
-	S5P_CMU_RESET_MAUDIO_LOWPWR,
-	S5P_CMU_RESET_GPS_LOWPWR,
-	S5P_TOP_BUS_LOWPWR,
-	S5P_TOP_RETENTION_LOWPWR,
-	S5P_TOP_PWR_LOWPWR,
-	S5P_LOGIC_RESET_LOWPWR,
-	S5P_ONENAND_MEM_LOWPWR,
-	S5P_MODIMIF_MEM_LOWPWR,
-	S5P_G2D_ACP_MEM_LOWPWR,
-	S5P_USBOTG_MEM_LOWPWR,
-	S5P_HSMMC_MEM_LOWPWR,
-	S5P_CSSYS_MEM_LOWPWR,
-	S5P_SECSS_MEM_LOWPWR,
-	S5P_PCIE_MEM_LOWPWR,
-	S5P_SATA_MEM_LOWPWR,
-	S5P_PAD_RETENTION_DRAM_LOWPWR,
-	S5P_PAD_RETENTION_MAUDIO_LOWPWR,
-	S5P_PAD_RETENTION_GPIO_LOWPWR,
-	S5P_PAD_RETENTION_UART_LOWPWR,
-	S5P_PAD_RETENTION_MMCA_LOWPWR,
-	S5P_PAD_RETENTION_MMCB_LOWPWR,
-	S5P_PAD_RETENTION_EBIA_LOWPWR,
-	S5P_PAD_RETENTION_EBIB_LOWPWR,
-	S5P_PAD_RETENTION_ISOLATION_LOWPWR,
-	S5P_PAD_RETENTION_ALV_SEL_LOWPWR,
-	S5P_XUSBXTI_LOWPWR,
-	S5P_XXTI_LOWPWR,
-	S5P_EXT_REGULATOR_LOWPWR,
-	S5P_GPIO_MODE_LOWPWR,
-	S5P_GPIO_MODE_MAUDIO_LOWPWR,
-	S5P_CAM_LOWPWR,
-	S5P_TV_LOWPWR,
-	S5P_MFC_LOWPWR,
-	S5P_G3D_LOWPWR,
-	S5P_LCD0_LOWPWR,
-	S5P_LCD1_LOWPWR,
-	S5P_MAUDIO_LOWPWR,
-	S5P_GPS_LOWPWR,
-	S5P_GPS_ALIVE_LOWPWR,
+static struct exynos4_pmu_conf *exynos4_pmu_config;
+
+static struct exynos4_pmu_conf exynos4210_pmu_config[] = {
+	/* { .reg = address, .val = { AFTR, LPA, SLEEP } */
+	{ S5P_ARM_CORE0_LOWPWR,			{ 0x0, 0x0, 0x2 } },
+	{ S5P_DIS_IRQ_CORE0,			{ 0x0, 0x0, 0x0 } },
+	{ S5P_DIS_IRQ_CENTRAL0,			{ 0x0, 0x0, 0x0 } },
+	{ S5P_ARM_CORE1_LOWPWR,			{ 0x0, 0x0, 0x2 } },
+	{ S5P_DIS_IRQ_CORE1,			{ 0x0, 0x0, 0x0 } },
+	{ S5P_DIS_IRQ_CENTRAL1,			{ 0x0, 0x0, 0x0 } },
+	{ S5P_ARM_COMMON_LOWPWR,		{ 0x0, 0x0, 0x2 } },
+	{ S5P_L2_0_LOWPWR,			{ 0x2, 0x2, 0x3 } },
+	{ S5P_L2_1_LOWPWR,			{ 0x2, 0x2, 0x3 } },
+	{ S5P_CMU_ACLKSTOP_LOWPWR,		{ 0x1, 0x0, 0x0 } },
+	{ S5P_CMU_SCLKSTOP_LOWPWR,		{ 0x1, 0x0, 0x0 } },
+	{ S5P_CMU_RESET_LOWPWR,			{ 0x1, 0x1, 0x0 } },
+	{ S5P_APLL_SYSCLK_LOWPWR,		{ 0x1, 0x0, 0x0 } },
+	{ S5P_MPLL_SYSCLK_LOWPWR,		{ 0x1, 0x0, 0x0 } },
+	{ S5P_VPLL_SYSCLK_LOWPWR,		{ 0x1, 0x0, 0x0 } },
+	{ S5P_EPLL_SYSCLK_LOWPWR,		{ 0x1, 0x1, 0x0 } },
+	{ S5P_CMU_CLKSTOP_GPS_ALIVE_LOWPWR,	{ 0x1, 0x1, 0x0 } },
+	{ S5P_CMU_RESET_GPSALIVE_LOWPWR,	{ 0x1, 0x1, 0x0 } },
+	{ S5P_CMU_CLKSTOP_CAM_LOWPWR,		{ 0x1, 0x1, 0x0 } },
+	{ S5P_CMU_CLKSTOP_TV_LOWPWR,		{ 0x1, 0x1, 0x0 } },
+	{ S5P_CMU_CLKSTOP_MFC_LOWPWR,		{ 0x1, 0x1, 0x0 } },
+	{ S5P_CMU_CLKSTOP_G3D_LOWPWR,		{ 0x1, 0x1, 0x0 } },
+	{ S5P_CMU_CLKSTOP_LCD0_LOWPWR,		{ 0x1, 0x1, 0x0 } },
+	{ S5P_CMU_CLKSTOP_LCD1_LOWPWR,		{ 0x1, 0x1, 0x0 } },
+	{ S5P_CMU_CLKSTOP_MAUDIO_LOWPWR,	{ 0x1, 0x1, 0x0 } },
+	{ S5P_CMU_CLKSTOP_GPS_LOWPWR,		{ 0x1, 0x1, 0x0 } },
+	{ S5P_CMU_RESET_CAM_LOWPWR,		{ 0x1, 0x1, 0x0 } },
+	{ S5P_CMU_RESET_TV_LOWPWR,		{ 0x1, 0x1, 0x0 } },
+	{ S5P_CMU_RESET_MFC_LOWPWR,		{ 0x1, 0x1, 0x0 } },
+	{ S5P_CMU_RESET_G3D_LOWPWR,		{ 0x1, 0x1, 0x0 } },
+	{ S5P_CMU_RESET_LCD0_LOWPWR,		{ 0x1, 0x1, 0x0 } },
+	{ S5P_CMU_RESET_LCD1_LOWPWR,		{ 0x1, 0x1, 0x0 } },
+	{ S5P_CMU_RESET_MAUDIO_LOWPWR,		{ 0x1, 0x1, 0x0 } },
+	{ S5P_CMU_RESET_GPS_LOWPWR,		{ 0x1, 0x1, 0x0 } },
+	{ S5P_TOP_BUS_LOWPWR,			{ 0x3, 0x0, 0x0 } },
+	{ S5P_TOP_RETENTION_LOWPWR,		{ 0x1, 0x0, 0x1 } },
+	{ S5P_TOP_PWR_LOWPWR,			{ 0x3, 0x0, 0x3 } },
+	{ S5P_LOGIC_RESET_LOWPWR,		{ 0x1, 0x1, 0x0 } },
+	{ S5P_ONENAND_MEM_LOWPWR,		{ 0x3, 0x0, 0x0 } },
+	{ S5P_MODIMIF_MEM_LOWPWR,		{ 0x3, 0x0, 0x0 } },
+	{ S5P_G2D_ACP_MEM_LOWPWR,		{ 0x3, 0x0, 0x0 } },
+	{ S5P_USBOTG_MEM_LOWPWR,		{ 0x3, 0x0, 0x0 } },
+	{ S5P_HSMMC_MEM_LOWPWR,			{ 0x3, 0x0, 0x0 } },
+	{ S5P_CSSYS_MEM_LOWPWR,			{ 0x3, 0x0, 0x0 } },
+	{ S5P_SECSS_MEM_LOWPWR,			{ 0x3, 0x0, 0x0 } },
+	{ S5P_PCIE_MEM_LOWPWR,			{ 0x3, 0x0, 0x0 } },
+	{ S5P_SATA_MEM_LOWPWR,			{ 0x3, 0x0, 0x0 } },
+	{ S5P_PAD_RETENTION_DRAM_LOWPWR,	{ 0x1, 0x0, 0x0 } },
+	{ S5P_PAD_RETENTION_MAUDIO_LOWPWR,	{ 0x1, 0x1, 0x0 } },
+	{ S5P_PAD_RETENTION_GPIO_LOWPWR,	{ 0x1, 0x0, 0x0 } },
+	{ S5P_PAD_RETENTION_UART_LOWPWR,	{ 0x1, 0x0, 0x0 } },
+	{ S5P_PAD_RETENTION_MMCA_LOWPWR,	{ 0x1, 0x0, 0x0 } },
+	{ S5P_PAD_RETENTION_MMCB_LOWPWR,	{ 0x1, 0x0, 0x0 } },
+	{ S5P_PAD_RETENTION_EBIA_LOWPWR,	{ 0x1, 0x0, 0x0 } },
+	{ S5P_PAD_RETENTION_EBIB_LOWPWR,	{ 0x1, 0x0, 0x0 } },
+	{ S5P_PAD_RETENTION_ISOLATION_LOWPWR,	{ 0x1, 0x0, 0x0 } },
+	{ S5P_PAD_RETENTION_ALV_SEL_LOWPWR,	{ 0x1, 0x0, 0x0 } },
+	{ S5P_XUSBXTI_LOWPWR,			{ 0x1, 0x1, 0x0 } },
+	{ S5P_XXTI_LOWPWR,			{ 0x1, 0x1, 0x0 } },
+	{ S5P_EXT_REGULATOR_LOWPWR,		{ 0x1, 0x1, 0x0 } },
+	{ S5P_GPIO_MODE_LOWPWR,			{ 0x1, 0x0, 0x0 } },
+	{ S5P_GPIO_MODE_MAUDIO_LOWPWR,		{ 0x1, 0x1, 0x0 } },
+	{ S5P_CAM_LOWPWR,			{ 0x7, 0x0, 0x0 } },
+	{ S5P_TV_LOWPWR,			{ 0x7, 0x0, 0x0 } },
+	{ S5P_MFC_LOWPWR,			{ 0x7, 0x0, 0x0 } },
+	{ S5P_G3D_LOWPWR,			{ 0x7, 0x0, 0x0 } },
+	{ S5P_LCD0_LOWPWR,			{ 0x7, 0x0, 0x0 } },
+	{ S5P_LCD1_LOWPWR,			{ 0x7, 0x0, 0x0 } },
+	{ S5P_MAUDIO_LOWPWR,			{ 0x7, 0x7, 0x0 } },
+	{ S5P_GPS_LOWPWR,			{ 0x7, 0x0, 0x0 } },
+	{ S5P_GPS_ALIVE_LOWPWR,			{ 0x7, 0x0, 0x0 } },
+	{ PMU_TABLE_END,},
 };
 
-static const unsigned int sys_powerdown_val[][NUM_SYS_POWERDOWN] = {
-	/* { AFTR, LPA, SLEEP }*/
-	{ 0, 0, 2 },	/* ARM_CORE0 */
-	{ 0, 0, 0 },	/* ARM_DIS_IRQ_CORE0 */
-	{ 0, 0, 0 },	/* ARM_DIS_IRQ_CENTRAL0 */
-	{ 0, 0, 2 },	/* ARM_CORE1 */
-	{ 0, 0, 0 },	/* ARM_DIS_IRQ_CORE1 */
-	{ 0, 0, 0 },	/* ARM_DIS_IRQ_CENTRAL1 */
-	{ 0, 0, 2 },	/* ARM_COMMON */
-	{ 2, 2, 3 },	/* ARM_CPU_L2_0 */
-	{ 2, 2, 3 },	/* ARM_CPU_L2_1 */
-	{ 1, 0, 0 },	/* CMU_ACLKSTOP */
-	{ 1, 0, 0 },	/* CMU_SCLKSTOP */
-	{ 1, 1, 0 },	/* CMU_RESET */
-	{ 1, 0, 0 },	/* APLL_SYSCLK */
-	{ 1, 0, 0 },	/* MPLL_SYSCLK */
-	{ 1, 0, 0 },	/* VPLL_SYSCLK */
-	{ 1, 1, 0 },	/* EPLL_SYSCLK */
-	{ 1, 1, 0 },	/* CMU_CLKSTOP_GPS_ALIVE */
-	{ 1, 1, 0 },	/* CMU_RESET_GPS_ALIVE */
-	{ 1, 1, 0 },	/* CMU_CLKSTOP_CAM */
-	{ 1, 1, 0 },	/* CMU_CLKSTOP_TV */
-	{ 1, 1, 0 },	/* CMU_CLKSTOP_MFC */
-	{ 1, 1, 0 },	/* CMU_CLKSTOP_G3D */
-	{ 1, 1, 0 },	/* CMU_CLKSTOP_LCD0 */
-	{ 1, 1, 0 },	/* CMU_CLKSTOP_LCD1 */
-	{ 1, 1, 0 },	/* CMU_CLKSTOP_MAUDIO */
-	{ 1, 1, 0 },	/* CMU_CLKSTOP_GPS */
-	{ 1, 1, 0 },	/* CMU_RESET_CAM */
-	{ 1, 1, 0 },	/* CMU_RESET_TV */
-	{ 1, 1, 0 },	/* CMU_RESET_MFC */
-	{ 1, 1, 0 },	/* CMU_RESET_G3D */
-	{ 1, 1, 0 },	/* CMU_RESET_LCD0 */
-	{ 1, 1, 0 },	/* CMU_RESET_LCD1 */
-	{ 1, 1, 0 },	/* CMU_RESET_MAUDIO */
-	{ 1, 1, 0 },	/* CMU_RESET_GPS */
-	{ 3, 0, 0 },	/* TOP_BUS */
-	{ 1, 0, 1 },	/* TOP_RETENTION */
-	{ 3, 0, 3 },	/* TOP_PWR */
-	{ 1, 1, 0 },	/* LOGIC_RESET */
-	{ 3, 0, 0 },	/* ONENAND_MEM */
-	{ 3, 0, 0 },	/* MODIMIF_MEM */
-	{ 3, 0, 0 },	/* G2D_ACP_MEM */
-	{ 3, 0, 0 },	/* USBOTG_MEM */
-	{ 3, 0, 0 },	/* HSMMC_MEM */
-	{ 3, 0, 0 },	/* CSSYS_MEM */
-	{ 3, 0, 0 },	/* SECSS_MEM */
-	{ 3, 0, 0 },	/* PCIE_MEM */
-	{ 3, 0, 0 },	/* SATA_MEM */
-	{ 1, 0, 0 },	/* PAD_RETENTION_DRAM */
-	{ 1, 1, 0 },	/* PAD_RETENTION_MAUDIO */
-	{ 1, 0, 0 },	/* PAD_RETENTION_GPIO */
-	{ 1, 0, 0 },	/* PAD_RETENTION_UART */
-	{ 1, 0, 0 },	/* PAD_RETENTION_MMCA */
-	{ 1, 0, 0 },	/* PAD_RETENTION_MMCB */
-	{ 1, 0, 0 },	/* PAD_RETENTION_EBIA */
-	{ 1, 0, 0 },	/* PAD_RETENTION_EBIB */
-	{ 1, 0, 0 },	/* PAD_RETENTION_ISOLATION */
-	{ 1, 0, 0 },	/* PAD_RETENTION_ALV_SEL */
-	{ 1, 1, 0 },	/* XUSBXTI */
-	{ 1, 1, 0 },	/* XXTI */
-	{ 1, 1, 0 },	/* EXT_REGULATOR */
-	{ 1, 0, 0 },	/* GPIO_MODE */
-	{ 1, 1, 0 },	/* GPIO_MODE_MAUDIO */
-	{ 7, 0, 0 },	/* CAM */
-	{ 7, 0, 0 },	/* TV */
-	{ 7, 0, 0 },	/* MFC */
-	{ 7, 0, 0 },	/* G3D */
-	{ 7, 0, 0 },	/* LCD0 */
-	{ 7, 0, 0 },	/* LCD1 */
-	{ 7, 7, 0 },	/* MAUDIO */
-	{ 7, 0, 0 },	/* GPS */
-	{ 7, 0, 0 },	/* GPS_ALIVE */
+static struct exynos4_pmu_conf exynos4212_pmu_config[] = {
+	{ S5P_ARM_CORE0_LOWPWR,			{ 0x0, 0x0, 0x2 } },
+	{ S5P_DIS_IRQ_CORE0,			{ 0x0, 0x0, 0x0 } },
+	{ S5P_DIS_IRQ_CENTRAL0,			{ 0x0, 0x0, 0x0 } },
+	{ S5P_ARM_CORE1_LOWPWR,			{ 0x0, 0x0, 0x2 } },
+	{ S5P_DIS_IRQ_CORE1,			{ 0x0, 0x0, 0x0 } },
+	{ S5P_DIS_IRQ_CENTRAL1,			{ 0x0, 0x0, 0x0 } },
+	{ S5P_ISP_ARM_LOWPWR,			{ 0x1, 0x0, 0x0 } },
+	{ S5P_DIS_IRQ_ISP_ARM_LOCAL_LOWPWR,	{ 0x0, 0x0, 0x0 } },
+	{ S5P_DIS_IRQ_ISP_ARM_CENTRAL_LOWPWR,	{ 0x0, 0x0, 0x0 } },
+	{ S5P_ARM_COMMON_LOWPWR,		{ 0x0, 0x0, 0x2 } },
+	{ S5P_L2_0_LOWPWR,			{ 0x0, 0x0, 0x3 } },
+	/* XXX_OPTION register should be set other field */
+	{ S5P_ARM_L2_0_OPTION,			{ 0x10, 0x10, 0x0 } },
+	{ S5P_L2_1_LOWPWR,			{ 0x0, 0x0, 0x3 } },
+	{ S5P_ARM_L2_1_OPTION,			{ 0x10, 0x10, 0x0 } },
+	{ S5P_CMU_ACLKSTOP_LOWPWR,		{ 0x1, 0x0, 0x0 } },
+	{ S5P_CMU_SCLKSTOP_LOWPWR,		{ 0x1, 0x0, 0x0 } },
+	{ S5P_CMU_RESET_LOWPWR,			{ 0x1, 0x1, 0x0 } },
+	{ S5P_DRAM_FREQ_DOWN_LOWPWR,		{ 0x1, 0x1, 0x1 } },
+	{ S5P_DDRPHY_DLLOFF_LOWPWR,		{ 0x1, 0x1, 0x1 } },
+	{ S5P_LPDDR_PHY_DLL_LOCK_LOWPWR,	{ 0x1, 0x1, 0x1 } },
+	{ S5P_CMU_ACLKSTOP_COREBLK_LOWPWR,	{ 0x1, 0x0, 0x0 } },
+	{ S5P_CMU_SCLKSTOP_COREBLK_LOWPWR,	{ 0x1, 0x0, 0x0 } },
+	{ S5P_CMU_RESET_COREBLK_LOWPWR,		{ 0x1, 0x1, 0x0 } },
+	{ S5P_APLL_SYSCLK_LOWPWR,		{ 0x1, 0x0, 0x0 } },
+	{ S5P_MPLL_SYSCLK_LOWPWR,		{ 0x1, 0x0, 0x0 } },
+	{ S5P_VPLL_SYSCLK_LOWPWR,		{ 0x1, 0x0, 0x0 } },
+	{ S5P_EPLL_SYSCLK_LOWPWR,		{ 0x1, 0x1, 0x0 } },
+	{ S5P_MPLLUSER_SYSCLK_LOWPWR,		{ 0x1, 0x0, 0x0 } },
+	{ S5P_CMU_CLKSTOP_GPS_ALIVE_LOWPWR,	{ 0x1, 0x0, 0x0 } },
+	{ S5P_CMU_RESET_GPSALIVE_LOWPWR,	{ 0x1, 0x0, 0x0 } },
+	{ S5P_CMU_CLKSTOP_CAM_LOWPWR,		{ 0x1, 0x0, 0x0 } },
+	{ S5P_CMU_CLKSTOP_TV_LOWPWR,		{ 0x1, 0x0, 0x0 } },
+	{ S5P_CMU_CLKSTOP_MFC_LOWPWR,		{ 0x1, 0x0, 0x0 } },
+	{ S5P_CMU_CLKSTOP_G3D_LOWPWR,		{ 0x1, 0x0, 0x0 } },
+	{ S5P_CMU_CLKSTOP_LCD0_LOWPWR,		{ 0x1, 0x0, 0x0 } },
+	{ S5P_CMU_CLKSTOP_ISP_LOWPWR,		{ 0x1, 0x0, 0x0 } },
+	{ S5P_CMU_CLKSTOP_MAUDIO_LOWPWR,	{ 0x1, 0x0, 0x0 } },
+	{ S5P_CMU_CLKSTOP_GPS_LOWPWR,		{ 0x1, 0x0, 0x0 } },
+	{ S5P_CMU_RESET_CAM_LOWPWR,		{ 0x1, 0x0, 0x0 } },
+	{ S5P_CMU_RESET_TV_LOWPWR,		{ 0x1, 0x0, 0x0 } },
+	{ S5P_CMU_RESET_MFC_LOWPWR,		{ 0x1, 0x0, 0x0 } },
+	{ S5P_CMU_RESET_G3D_LOWPWR,		{ 0x1, 0x0, 0x0 } },
+	{ S5P_CMU_RESET_LCD0_LOWPWR,		{ 0x1, 0x0, 0x0 } },
+	{ S5P_CMU_RESET_ISP_LOWPWR,		{ 0x1, 0x0, 0x0 } },
+	{ S5P_CMU_RESET_MAUDIO_LOWPWR,		{ 0x1, 0x1, 0x0 } },
+	{ S5P_CMU_RESET_GPS_LOWPWR,		{ 0x1, 0x0, 0x0 } },
+	{ S5P_TOP_BUS_LOWPWR,			{ 0x3, 0x0, 0x0 } },
+	{ S5P_TOP_RETENTION_LOWPWR,		{ 0x1, 0x0, 0x1 } },
+	{ S5P_TOP_PWR_LOWPWR,			{ 0x3, 0x0, 0x3 } },
+	{ S5P_TOP_BUS_COREBLK_LOWPWR,		{ 0x3, 0x0, 0x0 } },
+	{ S5P_TOP_RETENTION_COREBLK_LOWPWR,	{ 0x1, 0x0, 0x1 } },
+	{ S5P_TOP_PWR_COREBLK_LOWPWR,		{ 0x3, 0x0, 0x3 } },
+	{ S5P_LOGIC_RESET_LOWPWR,		{ 0x1, 0x1, 0x0 } },
+	{ S5P_OSCCLK_GATE_LOWPWR,		{ 0x1, 0x0, 0x1 } },
+	{ S5P_LOGIC_RESET_COREBLK_LOWPWR,	{ 0x1, 0x1, 0x0 } },
+	{ S5P_OSCCLK_GATE_COREBLK_LOWPWR,	{ 0x1, 0x0, 0x1 } },
+	{ S5P_ONENAND_MEM_LOWPWR,		{ 0x3, 0x0, 0x0 } },
+	{ S5P_ONENAND_MEM_OPTION,		{ 0x10, 0x10, 0x0 } },
+	{ S5P_HSI_MEM_LOWPWR,			{ 0x3, 0x0, 0x0 } },
+	{ S5P_HSI_MEM_OPTION,			{ 0x10, 0x10, 0x0 } },
+	{ S5P_G2D_ACP_MEM_LOWPWR,		{ 0x3, 0x0, 0x0 } },
+	{ S5P_G2D_ACP_MEM_OPTION,		{ 0x10, 0x10, 0x0 } },
+	{ S5P_USBOTG_MEM_LOWPWR,		{ 0x3, 0x0, 0x0 } },
+	{ S5P_USBOTG_MEM_OPTION,		{ 0x10, 0x10, 0x0 } },
+	{ S5P_HSMMC_MEM_LOWPWR,			{ 0x3, 0x0, 0x0 } },
+	{ S5P_HSMMC_MEM_OPTION,			{ 0x10, 0x10, 0x0 } },
+	{ S5P_CSSYS_MEM_LOWPWR,			{ 0x3, 0x0, 0x0 } },
+	{ S5P_CSSYS_MEM_OPTION,			{ 0x10, 0x10, 0x0 } },
+	{ S5P_SECSS_MEM_LOWPWR,			{ 0x3, 0x0, 0x0 } },
+	{ S5P_SECSS_MEM_OPTION,			{ 0x10, 0x10, 0x0 } },
+	{ S5P_ROTATOR_MEM_LOWPWR,		{ 0x3, 0x0, 0x0 } },
+	{ S5P_ROTATOR_MEM_OPTION,		{ 0x10, 0x10, 0x0 } },
+	{ S5P_PAD_RETENTION_DRAM_LOWPWR,	{ 0x1, 0x0, 0x0 } },
+	{ S5P_PAD_RETENTION_MAUDIO_LOWPWR,	{ 0x1, 0x1, 0x0 } },
+	{ S5P_PAD_RETENTION_GPIO_LOWPWR,	{ 0x1, 0x0, 0x0 } },
+	{ S5P_PAD_RETENTION_UART_LOWPWR,	{ 0x1, 0x0, 0x0 } },
+	{ S5P_PAD_RETENTION_MMCA_LOWPWR,	{ 0x1, 0x0, 0x0 } },
+	{ S5P_PAD_RETENTION_MMCB_LOWPWR,	{ 0x1, 0x0, 0x0 } },
+	{ S5P_PAD_RETENTION_EBIA_LOWPWR,	{ 0x1, 0x0, 0x0 } },
+	{ S5P_PAD_RETENTION_EBIB_LOWPWR,	{ 0x1, 0x0, 0x0 } },
+	{ S5P_PAD_RETENTION_GPIO_COREBLK_LOWPWR,{ 0x1, 0x0, 0x0 } },
+	{ S5P_PAD_RETENTION_ISOLATION_LOWPWR,	{ 0x1, 0x0, 0x0 } },
+	{ S5P_PAD_ISOLATION_COREBLK_LOWPWR,	{ 0x1, 0x0, 0x0 } },
+	{ S5P_PAD_RETENTION_ALV_SEL_LOWPWR,	{ 0x1, 0x0, 0x0 } },
+	{ S5P_XUSBXTI_LOWPWR,			{ 0x1, 0x1, 0x0 } },
+	{ S5P_XXTI_LOWPWR,			{ 0x1, 0x1, 0x0 } },
+	{ S5P_EXT_REGULATOR_LOWPWR,		{ 0x1, 0x1, 0x0 } },
+	{ S5P_GPIO_MODE_LOWPWR,			{ 0x1, 0x0, 0x0 } },
+	{ S5P_GPIO_MODE_COREBLK_LOWPWR,		{ 0x1, 0x0, 0x0 } },
+	{ S5P_GPIO_MODE_MAUDIO_LOWPWR,		{ 0x1, 0x1, 0x0 } },
+	{ S5P_TOP_ASB_RESET_LOWPWR,		{ 0x1, 0x1, 0x1 } },
+	{ S5P_TOP_ASB_ISOLATION_LOWPWR,		{ 0x1, 0x0, 0x1 } },
+	{ S5P_CAM_LOWPWR,			{ 0x7, 0x0, 0x0 } },
+	{ S5P_TV_LOWPWR,			{ 0x7, 0x0, 0x0 } },
+	{ S5P_MFC_LOWPWR,			{ 0x7, 0x0, 0x0 } },
+	{ S5P_G3D_LOWPWR,			{ 0x7, 0x0, 0x0 } },
+	{ S5P_LCD0_LOWPWR,			{ 0x7, 0x0, 0x0 } },
+	{ S5P_ISP_LOWPWR,			{ 0x7, 0x0, 0x0 } },
+	{ S5P_MAUDIO_LOWPWR,			{ 0x7, 0x7, 0x0 } },
+	{ S5P_GPS_LOWPWR,			{ 0x7, 0x0, 0x0 } },
+	{ S5P_GPS_ALIVE_LOWPWR,			{ 0x7, 0x0, 0x0 } },
+	{ S5P_CMU_SYSCLK_ISP_LOWPWR,		{ 0x1, 0x0, 0x0 } },
+	{ S5P_CMU_SYSCLK_GPS_LOWPWR,		{ 0x1, 0x0, 0x0 } },
+	{ PMU_TABLE_END,},
 };
 
 void exynos4_sys_powerdown_conf(enum sys_powerdown mode)
 {
-	unsigned int count = ARRAY_SIZE(sys_powerdown_reg);
+	unsigned int i;
+
+	for (i = 0; (exynos4_pmu_config[i].reg != PMU_TABLE_END) ; i++)
+		__raw_writel(exynos4_pmu_config[i].val[mode],
+				exynos4_pmu_config[i].reg);
+}
+
+static int __init exynos4_pmu_init(void)
+{
+	exynos4_pmu_config = exynos4210_pmu_config;
+
+	if (soc_is_exynos4210()) {
+		exynos4_pmu_config = exynos4210_pmu_config;
+		pr_info("EXYNOS4210 PMU Initialize\n");
+	} else if (soc_is_exynos4212()) {
+		exynos4_pmu_config = exynos4212_pmu_config;
+		pr_info("EXYNOS4212 PMU Initialize\n");
+	} else {
+		pr_info("EXYNOS4: PMU not supported\n");
+	}
 
-	for (; count > 0; count--)
-		__raw_writel(sys_powerdown_val[count - 1][mode],
-				sys_powerdown_reg[count - 1]);
+	return 0;
 }
+arch_initcall(exynos4_pmu_init);

arch/arm/mach-exynos4/setup-keypad.c

@@ -19,15 +19,16 @@ void samsung_keypad_cfg_gpio(unsigned int rows, unsigned int cols)
 
 	if (rows > 8) {
 		/* Set all the necessary GPX2 pins: KP_ROW[0~7] */
-		s3c_gpio_cfgrange_nopull(EXYNOS4_GPX2(0), 8, S3C_GPIO_SFN(3));
+		s3c_gpio_cfgall_range(EXYNOS4_GPX2(0), 8, S3C_GPIO_SFN(3),
+					S3C_GPIO_PULL_UP);
 
 		/* Set all the necessary GPX3 pins: KP_ROW[8~] */
-		s3c_gpio_cfgrange_nopull(EXYNOS4_GPX3(0), (rows - 8),
-					 S3C_GPIO_SFN(3));
+		s3c_gpio_cfgall_range(EXYNOS4_GPX3(0), (rows - 8),
+					 S3C_GPIO_SFN(3), S3C_GPIO_PULL_UP);
 	} else {
 		/* Set all the necessary GPX2 pins: KP_ROW[x] */
-		s3c_gpio_cfgrange_nopull(EXYNOS4_GPX2(0), rows,
-					 S3C_GPIO_SFN(3));
+		s3c_gpio_cfgall_range(EXYNOS4_GPX2(0), rows, S3C_GPIO_SFN(3),
+					S3C_GPIO_PULL_UP);
 	}
 
 	/* Set all the necessary GPX1 pins to special-function 3: KP_COL[x] */

arch/arm/mach-exynos4/setup-sdhci.c

@@ -10,16 +10,7 @@
  * published by the Free Software Foundation.
 */
 
-#include <linux/kernel.h>
 #include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-
-#include <linux/mmc/card.h>
-#include <linux/mmc/host.h>
-
-#include <plat/regs-sdhci.h>
 
 /* clock sources for the mmc bus clock, order as for the ctrl2[5..4] */
 
@@ -29,41 +20,3 @@ char *exynos4_hsmmc_clksrcs[4] = {
 	[2] = "sclk_mmc",	/* mmc_bus */
 	[3] = NULL,
 };
-
-void exynos4_setup_sdhci_cfg_card(struct platform_device *dev, void __iomem *r,
-				  struct mmc_ios *ios, struct mmc_card *card)
-{
-	u32 ctrl2, ctrl3;
-
-	/* don't need to alter anything according to card-type */
-
-	ctrl2 = readl(r + S3C_SDHCI_CONTROL2);
-
-	/* select base clock source to HCLK */
-
-	ctrl2 &= S3C_SDHCI_CTRL2_SELBASECLK_MASK;
-
-	/*
-	 * clear async mode, enable conflict mask, rx feedback ctrl, SD
-	 * clk hold and no use debounce count
-	 */
-
-	ctrl2 |= (S3C64XX_SDHCI_CTRL2_ENSTAASYNCCLR |
-		  S3C64XX_SDHCI_CTRL2_ENCMDCNFMSK |
-		  S3C_SDHCI_CTRL2_ENFBCLKRX |
-		  S3C_SDHCI_CTRL2_DFCNT_NONE |
-		  S3C_SDHCI_CTRL2_ENCLKOUTHOLD);
-
-	/* Tx and Rx feedback clock delay control */
-
-	if (ios->clock < 25 * 1000000)
-		ctrl3 = (S3C_SDHCI_CTRL3_FCSEL3 |
-			 S3C_SDHCI_CTRL3_FCSEL2 |
-			 S3C_SDHCI_CTRL3_FCSEL1 |
-			 S3C_SDHCI_CTRL3_FCSEL0);
-	else
-		ctrl3 = (S3C_SDHCI_CTRL3_FCSEL1 | S3C_SDHCI_CTRL3_FCSEL0);
-
-	writel(ctrl2, r + S3C_SDHCI_CONTROL2);
-	writel(ctrl3, r + S3C_SDHCI_CONTROL3);
-}

arch/arm/mach-integrator/integrator_ap.c

@@ -32,6 +32,7 @@
 #include <linux/interrupt.h>
 #include <linux/io.h>
 #include <linux/mtd/physmap.h>
+#include <video/vga.h>
 
 #include <mach/hardware.h>
 #include <mach/platform.h>
@@ -154,6 +155,7 @@ static struct map_desc ap_io_desc[] __initdata = {
 static void __init ap_map_io(void)
 {
 	iotable_init(ap_io_desc, ARRAY_SIZE(ap_io_desc));
+	vga_base = PCI_MEMORY_VADDR;
 }
 
 #define INTEGRATOR_SC_VALID_INT	0x003fffff

arch/arm/mach-integrator/pci_v3.c

@@ -27,7 +27,6 @@
 #include <linux/spinlock.h>
 #include <linux/init.h>
 #include <linux/io.h>
-#include <video/vga.h>
 
 #include <mach/hardware.h>
 #include <mach/platform.h>
@@ -505,7 +504,6 @@ void __init pci_v3_preinit(void)
 
 	pcibios_min_io = 0x6000;
 	pcibios_min_mem = 0x00100000;
-	vga_base = PCI_MEMORY_VADDR;
 
 	/*
 	 * Hook in our fault handler for PCI errors

arch/arm/mach-s3c2410/Kconfig

@@ -6,9 +6,7 @@ config CPU_S3C2410
 	bool
 	depends on ARCH_S3C2410
 	select CPU_ARM920T
-	select S3C_GPIO_PULL_UP
 	select S3C2410_CLOCK
-	select S3C2410_GPIO
 	select CPU_LLSERIAL_S3C2410
 	select S3C2410_PM if PM
 	select S3C2410_CPUFREQ if CPU_FREQ_S3C24XX
@@ -28,11 +26,6 @@ config S3C2410_PM
 	help
 	  Power Management code common to S3C2410 and better
 
-config S3C2410_GPIO
-	bool
-	help
-	  GPIO code for S3C2410 and similar processors
-
 config SIMTEC_NOR
 	bool
 	help

arch/arm/mach-s3c2410/Makefile

@@ -13,7 +13,6 @@ obj-$(CONFIG_CPU_S3C2410)	+= s3c2410.o
 obj-$(CONFIG_CPU_S3C2410_DMA)	+= dma.o
 obj-$(CONFIG_CPU_S3C2410_DMA)	+= dma.o
 obj-$(CONFIG_S3C2410_PM)	+= pm.o sleep.o
-obj-$(CONFIG_S3C2410_GPIO)	+= gpio.o
 obj-$(CONFIG_S3C2410_CPUFREQ)	+= cpu-freq.o
 obj-$(CONFIG_S3C2410_PLLTABLE)	+= pll.o
 

arch/arm/mach-s3c2410/dma.c

@@ -47,38 +47,26 @@ static struct s3c24xx_dma_map __initdata s3c2410_dma_mappings[] = {
 		.channels[0]	= S3C2410_DCON_CH0_SDI | DMA_CH_VALID,
 		.channels[2]	= S3C2410_DCON_CH2_SDI | DMA_CH_VALID,
 		.channels[3]	= S3C2410_DCON_CH3_SDI | DMA_CH_VALID,
-		.hw_addr.to	= S3C2410_PA_IIS + S3C2410_IISFIFO,
-		.hw_addr.from	= S3C2410_PA_IIS + S3C2410_IISFIFO,
 	},
 	[DMACH_SPI0] = {
 		.name		= "spi0",
 		.channels[1]	= S3C2410_DCON_CH1_SPI | DMA_CH_VALID,
-		.hw_addr.to	= S3C2410_PA_SPI + S3C2410_SPTDAT,
-		.hw_addr.from	= S3C2410_PA_SPI + S3C2410_SPRDAT,
 	},
 	[DMACH_SPI1] = {
 		.name		= "spi1",
 		.channels[3]	= S3C2410_DCON_CH3_SPI | DMA_CH_VALID,
-		.hw_addr.to	= S3C2410_PA_SPI + 0x20 + S3C2410_SPTDAT,
-		.hw_addr.from	= S3C2410_PA_SPI + 0x20 + S3C2410_SPRDAT,
 	},
 	[DMACH_UART0] = {
 		.name		= "uart0",
 		.channels[0]	= S3C2410_DCON_CH0_UART0 | DMA_CH_VALID,
-		.hw_addr.to	= S3C2410_PA_UART0 + S3C2410_UTXH,
-		.hw_addr.from	= S3C2410_PA_UART0 + S3C2410_URXH,
 	},
 	[DMACH_UART1] = {
 		.name		= "uart1",
 		.channels[1]	= S3C2410_DCON_CH1_UART1 | DMA_CH_VALID,
-		.hw_addr.to	= S3C2410_PA_UART1 + S3C2410_UTXH,
-		.hw_addr.from	= S3C2410_PA_UART1 + S3C2410_URXH,
 	},
       	[DMACH_UART2] = {
 		.name		= "uart2",
 		.channels[3]	= S3C2410_DCON_CH3_UART2 | DMA_CH_VALID,
-		.hw_addr.to	= S3C2410_PA_UART2 + S3C2410_UTXH,
-		.hw_addr.from	= S3C2410_PA_UART2 + S3C2410_URXH,
 	},
 	[DMACH_TIMER] = {
 		.name		= "timer",
@@ -90,12 +78,10 @@ static struct s3c24xx_dma_map __initdata s3c2410_dma_mappings[] = {
 		.name		= "i2s-sdi",
 		.channels[1]	= S3C2410_DCON_CH1_I2SSDI | DMA_CH_VALID,
 		.channels[2]	= S3C2410_DCON_CH2_I2SSDI | DMA_CH_VALID,
-		.hw_addr.from	= S3C2410_PA_IIS + S3C2410_IISFIFO,
 	},
 	[DMACH_I2S_OUT] = {
 		.name		= "i2s-sdo",
 		.channels[2]	= S3C2410_DCON_CH2_I2SSDO | DMA_CH_VALID,
-		.hw_addr.to	= S3C2410_PA_IIS + S3C2410_IISFIFO,
 	},
 	[DMACH_USB_EP1] = {
 		.name		= "usb-ep1",

arch/arm/mach-s3c2410/gpio.c

@@ -1,72 +0,0 @@
-/* linux/arch/arm/mach-s3c2410/gpio.c
- *
- * Copyright (c) 2004-2006 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2410 GPIO support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <mach/gpio-fns.h>
-#include <asm/irq.h>
-
-#include <mach/regs-gpio.h>
-
-int s3c2410_gpio_irqfilter(unsigned int pin, unsigned int on,
-			   unsigned int config)
-{
-	void __iomem *reg = S3C24XX_EINFLT0;
-	unsigned long flags;
-	unsigned long val;
-
-	if (pin < S3C2410_GPG(8) || pin > S3C2410_GPG(15))
-		return -EINVAL;
-
-	config &= 0xff;
-
-	pin -= S3C2410_GPG(8);
-	reg += pin & ~3;
-
-	local_irq_save(flags);
-
-	/* update filter width and clock source */
-
-	val = __raw_readl(reg);
-	val &= ~(0xff << ((pin & 3) * 8));
-	val |= config << ((pin & 3) * 8);
-	__raw_writel(val, reg);
-
-	/* update filter enable */
-
-	val = __raw_readl(S3C24XX_EXTINT2);
-	val &= ~(1 << ((pin * 4) + 3));
-	val |= on << ((pin * 4) + 3);
-	__raw_writel(val, S3C24XX_EXTINT2);
-
-	local_irq_restore(flags);
-
-	return 0;
-}
-
-EXPORT_SYMBOL(s3c2410_gpio_irqfilter);

arch/arm/mach-s3c2410/include/mach/dma.h

@@ -13,7 +13,6 @@
 #ifndef __ASM_ARCH_DMA_H
 #define __ASM_ARCH_DMA_H __FILE__
 
-#include <plat/dma.h>
 #include <linux/sysdev.h>
 
 #define MAX_DMA_TRANSFER_SIZE   0x100000 /* Data Unit is half word  */
@@ -51,6 +50,18 @@ enum dma_ch {
 	DMACH_MAX,		/* the end entry */
 };
 
+static inline bool samsung_dma_has_circular(void)
+{
+	return false;
+}
+
+static inline bool samsung_dma_is_dmadev(void)
+{
+	return false;
+}
+
+#include <plat/dma.h>
+
 #define DMACH_LOW_LEVEL	(1<<28)	/* use this to specifiy hardware ch no */
 
 /* we have 4 dma channels */
@@ -163,7 +174,7 @@ struct s3c2410_dma_chan {
 	struct s3c2410_dma_client *client;
 
 	/* channel configuration */
-	enum s3c2410_dmasrc	 source;
+	enum dma_data_direction	 source;
 	enum dma_ch		 req_ch;
 	unsigned long		 dev_addr;
 	unsigned long		 load_timeout;
@@ -196,9 +207,4 @@ struct s3c2410_dma_chan {
 
 typedef unsigned long dma_device_t;
 
-static inline bool s3c_dma_has_circular(void)
-{
-	return false;
-}
-
 #endif /* __ASM_ARCH_DMA_H */

arch/arm/mach-s3c2410/include/mach/gpio-fns.h

@@ -1,98 +1 @@
-/* arch/arm/mach-s3c2410/include/mach/gpio-fns.h
- *
- * Copyright (c) 2003-2009 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2410 - hardware
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __MACH_GPIO_FNS_H
-#define __MACH_GPIO_FNS_H __FILE__
-
-/* These functions are in the to-be-removed category and it is strongly
- * encouraged not to use these in new code. They will be marked deprecated
- * very soon.
- *
- * Most of the functionality can be either replaced by the gpiocfg calls
- * for the s3c platform or by the generic GPIOlib API.
- *
- * As of 2.6.35-rc, these will be removed, with the few drivers using them
- * either replaced or given a wrapper until the calls can be removed.
-*/
-
-#include <plat/gpio-cfg.h>
-
-static inline void s3c2410_gpio_cfgpin(unsigned int pin, unsigned int cfg)
-{
-	/* 1:1 mapping between cfgpin and setcfg calls at the moment */
-	s3c_gpio_cfgpin(pin, cfg);
-}
-
-/* external functions for GPIO support
- *
- * These allow various different clients to access the same GPIO
- * registers without conflicting. If your driver only owns the entire
- * GPIO register, then it is safe to ioremap/__raw_{read|write} to it.
-*/
-
-extern unsigned int s3c2410_gpio_getcfg(unsigned int pin);
-
-/* s3c2410_gpio_getirq
- *
- * turn the given pin number into the corresponding IRQ number
- *
- * returns:
- *	< 0 = no interrupt for this pin
- *	>=0 = interrupt number for the pin
-*/
-
-extern int s3c2410_gpio_getirq(unsigned int pin);
-
-/* s3c2410_gpio_irqfilter
- *
- * set the irq filtering on the given pin
- *
- * on = 0 => disable filtering
- *      1 => enable filtering
- *
- * config = S3C2410_EINTFLT_PCLK or S3C2410_EINTFLT_EXTCLK orred with
- *          width of filter (0 through 63)
- *
- *
-*/
-
-extern int s3c2410_gpio_irqfilter(unsigned int pin, unsigned int on,
-				  unsigned int config);
-
-/* s3c2410_gpio_pullup
- *
- * This call should be replaced with s3c_gpio_setpull().
- *
- * As a note, there is currently no distinction between pull-up and pull-down
- * in the s3c24xx series devices with only an on/off configuration.
- */
-
-/* s3c2410_gpio_pullup
- *
- * configure the pull-up control on the given pin
- *
- * to = 1 => disable the pull-up
- *      0 => enable the pull-up
- *
- * eg;
- *
- *   s3c2410_gpio_pullup(S3C2410_GPB(0), 0);
- *   s3c2410_gpio_pullup(S3C2410_GPE(8), 0);
-*/
-
-extern void s3c2410_gpio_pullup(unsigned int pin, unsigned int to);
-
-extern void s3c2410_gpio_setpin(unsigned int pin, unsigned int to);
-
-extern unsigned int s3c2410_gpio_getpin(unsigned int pin);
-
-#endif /* __MACH_GPIO_FNS_H */
+#include <plat/gpio-fns.h>

arch/arm/mach-s3c2410/include/mach/gpio-track.h

@@ -17,11 +17,11 @@
 
 #include <mach/regs-gpio.h>
 
-extern struct s3c_gpio_chip s3c24xx_gpios[];
+extern struct samsung_gpio_chip s3c24xx_gpios[];
 
-static inline struct s3c_gpio_chip *s3c_gpiolib_getchip(unsigned int pin)
+static inline struct samsung_gpio_chip *samsung_gpiolib_getchip(unsigned int pin)
 {
-	struct s3c_gpio_chip *chip;
+	struct samsung_gpio_chip *chip;
 
 	if (pin > S3C_GPIO_END)
 		return NULL;

arch/arm/mach-s3c2410/include/mach/map.h

@@ -14,9 +14,53 @@
 #define __ASM_ARCH_MAP_H
 
 #include <plat/map-base.h>
-#include <plat/map.h>
 
-#define S3C2410_ADDR(x)		S3C_ADDR(x)
+/*
+ * S3C2410 UART offset is 0x4000 but the other SoCs are 0x400.
+ * So need to define it, and here is to avoid redefinition warning.
+ */
+#define S3C_UART_OFFSET		(0x4000)
+
+#include <plat/map-s3c.h>
+
+/*
+ * interrupt controller is the first thing we put in, to make
+ * the assembly code for the irq detection easier
+ */
+#define S3C2410_PA_IRQ		(0x4A000000)
+#define S3C24XX_SZ_IRQ		SZ_1M
+
+/* memory controller registers */
+#define S3C2410_PA_MEMCTRL	(0x48000000)
+#define S3C24XX_SZ_MEMCTRL	SZ_1M
+
+/* UARTs */
+#define S3C_VA_UARTx(uart)	(S3C_VA_UART + ((uart * S3C_UART_OFFSET)))
+
+/* Timers */
+#define S3C2410_PA_TIMER	(0x51000000)
+#define S3C24XX_SZ_TIMER	SZ_1M
+
+/* Clock and Power management */
+#define S3C24XX_SZ_CLKPWR	SZ_1M
+
+/* USB Device port */
+#define S3C2410_PA_USBDEV	(0x52000000)
+#define S3C24XX_SZ_USBDEV	SZ_1M
+
+/* Watchdog */
+#define S3C2410_PA_WATCHDOG	(0x53000000)
+#define S3C24XX_SZ_WATCHDOG	SZ_1M
+
+/* Standard size definitions for peripheral blocks. */
+
+#define S3C24XX_SZ_UART		SZ_1M
+#define S3C24XX_SZ_IIS		SZ_1M
+#define S3C24XX_SZ_ADC		SZ_1M
+#define S3C24XX_SZ_SPI		SZ_1M
+#define S3C24XX_SZ_SDI		SZ_1M
+#define S3C24XX_SZ_NAND		SZ_1M
+#define S3C24XX_SZ_GPIO		SZ_1M
 
 /* USB host controller */
 #define S3C2410_PA_USBHOST (0x49000000)
@@ -75,10 +119,8 @@
 
 /* S3C2412 memory and IO controls */
 #define S3C2412_PA_SSMC	(0x4F000000)
-#define S3C2412_VA_SSMC	S3C_ADDR_CPU(0x00000000)
 
 #define S3C2412_PA_EBI	(0x48800000)
-#define S3C2412_VA_EBI	S3C_ADDR_CPU(0x00010000)
 
 /* physical addresses of all the chip-select areas */
 
@@ -100,12 +142,10 @@
 #define S3C24XX_PA_DMA      S3C2410_PA_DMA
 #define S3C24XX_PA_CLKPWR   S3C2410_PA_CLKPWR
 #define S3C24XX_PA_LCD      S3C2410_PA_LCD
-#define S3C24XX_PA_UART     S3C2410_PA_UART
 #define S3C24XX_PA_TIMER    S3C2410_PA_TIMER
 #define S3C24XX_PA_USBDEV   S3C2410_PA_USBDEV
 #define S3C24XX_PA_WATCHDOG S3C2410_PA_WATCHDOG
 #define S3C24XX_PA_IIS      S3C2410_PA_IIS
-#define S3C24XX_PA_GPIO     S3C2410_PA_GPIO
 #define S3C24XX_PA_RTC      S3C2410_PA_RTC
 #define S3C24XX_PA_ADC      S3C2410_PA_ADC
 #define S3C24XX_PA_SPI      S3C2410_PA_SPI

arch/arm/mach-s3c2410/include/mach/pm-core.h

@@ -64,4 +64,4 @@ static inline void s3c_pm_arch_update_uart(void __iomem *regs,
 }
 
 static inline void s3c_pm_restored_gpios(void) { }
-static inline void s3c_pm_saved_gpios(void) { }
+static inline void samsung_pm_saved_gpios(void) { }

arch/arm/mach-s3c2410/include/mach/regs-s3c2443-clock.h

@@ -102,6 +102,7 @@
 #define S3C2443_PCLKCON_UART3		(1<<3)
 #define S3C2443_PCLKCON_IIC		(1<<4)
 #define S3C2443_PCLKCON_SDI		(1<<5)
+#define S3C2443_PCLKCON_HSSPI		(1<<6)
 #define S3C2443_PCLKCON_ADC		(1<<7)
 #define S3C2443_PCLKCON_AC97		(1<<8)
 #define S3C2443_PCLKCON_IIS		(1<<9)

arch/arm/mach-s3c2410/mach-h1940.c

@@ -696,9 +696,9 @@ static void __init h1940_init(void)
 			      S3C2410_MISCCR_USBSUSPND0 |
 			      S3C2410_MISCCR_USBSUSPND1, 0x0);
 
-	tmp =   (0x78 << S3C24XX_PLLCON_MDIVSHIFT)
-	      | (0x02 << S3C24XX_PLLCON_PDIVSHIFT)
-	      | (0x03 << S3C24XX_PLLCON_SDIVSHIFT);
+	tmp =   (0x78 << S3C24XX_PLL_MDIV_SHIFT)
+	      | (0x02 << S3C24XX_PLL_PDIV_SHIFT)
+	      | (0x03 << S3C24XX_PLL_SDIV_SHIFT);
 	writel(tmp, S3C2410_UPLLCON);
 
 	gpio_request(S3C2410_GPC(0), "LCD power");

arch/arm/mach-s3c2410/s3c2410.c

@@ -72,8 +72,8 @@ void __init s3c2410_init_uarts(struct s3c2410_uartcfg *cfg, int no)
 
 void __init s3c2410_map_io(void)
 {
-	s3c24xx_gpiocfg_default.set_pull = s3c_gpio_setpull_1up;
-	s3c24xx_gpiocfg_default.get_pull = s3c_gpio_getpull_1up;
+	s3c24xx_gpiocfg_default.set_pull = s3c24xx_gpio_setpull_1up;
+	s3c24xx_gpiocfg_default.get_pull = s3c24xx_gpio_getpull_1up;
 
 	iotable_init(s3c2410_iodesc, ARRAY_SIZE(s3c2410_iodesc));
 }

arch/arm/mach-s3c2412/Kconfig

@@ -9,7 +9,6 @@ config CPU_S3C2412
 	select CPU_LLSERIAL_S3C2440
 	select S3C2412_PM if PM
 	select S3C2412_DMA if S3C2410_DMA
-	select S3C2410_GPIO
 	help
 	  Support for the S3C2412 and S3C2413 SoCs from the S3C24XX line
 

arch/arm/mach-s3c2412/Makefile

@@ -12,7 +12,6 @@ obj-				:=
 obj-$(CONFIG_CPU_S3C2412)	+= s3c2412.o
 obj-$(CONFIG_CPU_S3C2412)	+= irq.o
 obj-$(CONFIG_CPU_S3C2412)	+= clock.o
-obj-$(CONFIG_CPU_S3C2412)	+= gpio.o
 obj-$(CONFIG_S3C2412_DMA)	+= dma.o
 obj-$(CONFIG_S3C2412_PM)	+= pm.o
 obj-$(CONFIG_S3C2412_PM_SLEEP)	+= sleep.o

arch/arm/mach-s3c2412/dma.c

@@ -50,64 +50,46 @@ static struct s3c24xx_dma_map __initdata s3c2412_dma_mappings[] = {
 		.name		= "sdi",
 		.channels	= MAP(S3C2412_DMAREQSEL_SDI),
 		.channels_rx	= MAP(S3C2412_DMAREQSEL_SDI),
-		.hw_addr.to	= S3C2410_PA_SDI + S3C2410_SDIDATA,
-		.hw_addr.from	= S3C2410_PA_SDI + S3C2410_SDIDATA,
 	},
 	[DMACH_SPI0] = {
 		.name		= "spi0",
 		.channels	= MAP(S3C2412_DMAREQSEL_SPI0TX),
 		.channels_rx	= MAP(S3C2412_DMAREQSEL_SPI0RX),
-		.hw_addr.to	= S3C2410_PA_SPI + S3C2410_SPTDAT,
-		.hw_addr.from	= S3C2410_PA_SPI + S3C2410_SPRDAT,
 	},
 	[DMACH_SPI1] = {
 		.name		= "spi1",
 		.channels	= MAP(S3C2412_DMAREQSEL_SPI1TX),
 		.channels_rx	= MAP(S3C2412_DMAREQSEL_SPI1RX),
-		.hw_addr.to	= S3C2410_PA_SPI + S3C2412_SPI1 + S3C2410_SPTDAT,
-		.hw_addr.from	= S3C2410_PA_SPI + S3C2412_SPI1  + S3C2410_SPRDAT,
 	},
 	[DMACH_UART0] = {
 		.name		= "uart0",
 		.channels	= MAP(S3C2412_DMAREQSEL_UART0_0),
 		.channels_rx	= MAP(S3C2412_DMAREQSEL_UART0_0),
-		.hw_addr.to	= S3C2410_PA_UART0 + S3C2410_UTXH,
-		.hw_addr.from	= S3C2410_PA_UART0 + S3C2410_URXH,
 	},
 	[DMACH_UART1] = {
 		.name		= "uart1",
 		.channels	= MAP(S3C2412_DMAREQSEL_UART1_0),
 		.channels_rx	= MAP(S3C2412_DMAREQSEL_UART1_0),
-		.hw_addr.to	= S3C2410_PA_UART1 + S3C2410_UTXH,
-		.hw_addr.from	= S3C2410_PA_UART1 + S3C2410_URXH,
 	},
       	[DMACH_UART2] = {
 		.name		= "uart2",
 		.channels	= MAP(S3C2412_DMAREQSEL_UART2_0),
 		.channels_rx	= MAP(S3C2412_DMAREQSEL_UART2_0),
-		.hw_addr.to	= S3C2410_PA_UART2 + S3C2410_UTXH,
-		.hw_addr.from	= S3C2410_PA_UART2 + S3C2410_URXH,
 	},
 	[DMACH_UART0_SRC2] = {
 		.name		= "uart0",
 		.channels	= MAP(S3C2412_DMAREQSEL_UART0_1),
 		.channels_rx	= MAP(S3C2412_DMAREQSEL_UART0_1),
-		.hw_addr.to	= S3C2410_PA_UART0 + S3C2410_UTXH,
-		.hw_addr.from	= S3C2410_PA_UART0 + S3C2410_URXH,
 	},
 	[DMACH_UART1_SRC2] = {
 		.name		= "uart1",
 		.channels	= MAP(S3C2412_DMAREQSEL_UART1_1),
 		.channels_rx	= MAP(S3C2412_DMAREQSEL_UART1_1),
-		.hw_addr.to	= S3C2410_PA_UART1 + S3C2410_UTXH,
-		.hw_addr.from	= S3C2410_PA_UART1 + S3C2410_URXH,
 	},
       	[DMACH_UART2_SRC2] = {
 		.name		= "uart2",
 		.channels	= MAP(S3C2412_DMAREQSEL_UART2_1),
 		.channels_rx	= MAP(S3C2412_DMAREQSEL_UART2_1),
-		.hw_addr.to	= S3C2410_PA_UART2 + S3C2410_UTXH,
-		.hw_addr.from	= S3C2410_PA_UART2 + S3C2410_URXH,
 	},
 	[DMACH_TIMER] = {
 		.name		= "timer",
@@ -148,11 +130,11 @@ static struct s3c24xx_dma_map __initdata s3c2412_dma_mappings[] = {
 
 static void s3c2412_dma_direction(struct s3c2410_dma_chan *chan,
 				  struct s3c24xx_dma_map *map,
-				  enum s3c2410_dmasrc dir)
+				  enum dma_data_direction dir)
 {
 	unsigned long chsel;
 
-	if (dir == S3C2410_DMASRC_HW)
+	if (dir == DMA_FROM_DEVICE)
 		chsel = map->channels_rx[0];
 	else
 		chsel = map->channels[0];

arch/arm/mach-s3c2412/gpio.c

@@ -28,7 +28,7 @@
 
 int s3c2412_gpio_set_sleepcfg(unsigned int pin, unsigned int state)
 {
-	struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin);
+	struct samsung_gpio_chip *chip = samsung_gpiolib_getchip(pin);
 	unsigned long offs = pin - chip->chip.base;
 	unsigned long flags;
 	unsigned long slpcon;

arch/arm/mach-s3c2416/Kconfig

@@ -13,7 +13,6 @@ config CPU_S3C2416
 	select CPU_ARM926T
 	select S3C2416_DMA if S3C2410_DMA
 	select CPU_LLSERIAL_S3C2440
-	select S3C_GPIO_PULL_UPDOWN
 	select SAMSUNG_CLKSRC
 	select S3C2443_CLOCK
 	help

arch/arm/mach-s3c2416/clock.c

@@ -21,7 +21,6 @@
 #include <plat/cpu.h>
 
 #include <plat/cpu-freq.h>
-#include <plat/pll6553x.h>
 #include <plat/pll.h>
 
 #include <asm/mach/map.h>
@@ -38,6 +37,32 @@ static unsigned int armdiv[8] = {
 	[7] = 8,
 };
 
+static struct clksrc_clk hsspi_eplldiv = {
+	.clk = {
+		.name	= "hsspi-eplldiv",
+		.parent	= &clk_esysclk.clk,
+		.ctrlbit = (1 << 14),
+		.enable = s3c2443_clkcon_enable_s,
+	},
+	.reg_div = { .reg = S3C2443_CLKDIV1, .size = 2, .shift = 24 },
+};
+
+static struct clk *hsspi_sources[] = {
+	[0] = &hsspi_eplldiv.clk,
+	[1] = NULL, /* to fix */
+};
+
+static struct clksrc_clk hsspi_mux = {
+	.clk	= {
+		.name	= "hsspi-if",
+	},
+	.sources = &(struct clksrc_sources) {
+		.sources = hsspi_sources,
+		.nr_sources = ARRAY_SIZE(hsspi_sources),
+	},
+	.reg_src = { .reg = S3C2443_CLKSRC, .size = 1, .shift = 18 },
+};
+
 static struct clksrc_clk hsmmc_div[] = {
 	[0] = {
 		.clk = {
@@ -114,6 +139,8 @@ void __init_or_cpufreq s3c2416_setup_clocks(void)
 
 
 static struct clksrc_clk *clksrcs[] __initdata = {
+	&hsspi_eplldiv,
+	&hsspi_mux,
 	&hsmmc_div[0],
 	&hsmmc_div[1],
 	&hsmmc_mux[0],

arch/arm/mach-s3c2416/s3c2416.c

@@ -118,8 +118,8 @@ void __init s3c2416_init_uarts(struct s3c2410_uartcfg *cfg, int no)
 
 void __init s3c2416_map_io(void)
 {
-	s3c24xx_gpiocfg_default.set_pull = s3c_gpio_setpull_updown;
-	s3c24xx_gpiocfg_default.get_pull = s3c_gpio_getpull_updown;
+	s3c24xx_gpiocfg_default.set_pull = samsung_gpio_setpull_updown;
+	s3c24xx_gpiocfg_default.get_pull = samsung_gpio_getpull_updown;
 
 	/* initialize device information early */
 	s3c2416_default_sdhci0();

arch/arm/mach-s3c2416/setup-sdhci.c

@@ -12,17 +12,7 @@
  * published by the Free Software Foundation.
 */
 
-#include <linux/kernel.h>
 #include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-
-#include <linux/mmc/card.h>
-#include <linux/mmc/host.h>
-
-#include <plat/regs-sdhci.h>
-#include <plat/sdhci.h>
 
 /* clock sources for the mmc bus clock, order as for the ctrl2[5..4] */
 
@@ -32,30 +22,3 @@ char *s3c2416_hsmmc_clksrcs[4] = {
 	[2] = "hsmmc-if",
 	/* [3] = "48m", - note not successfully used yet */
 };
-
-void s3c2416_setup_sdhci_cfg_card(struct platform_device *dev,
-				  void __iomem *r,
-				  struct mmc_ios *ios,
-				  struct mmc_card *card)
-{
-	u32 ctrl2, ctrl3;
-
-	ctrl2 = __raw_readl(r + S3C_SDHCI_CONTROL2);
-	ctrl2 &= S3C_SDHCI_CTRL2_SELBASECLK_MASK;
-	ctrl2 |= (S3C64XX_SDHCI_CTRL2_ENSTAASYNCCLR |
-		  S3C64XX_SDHCI_CTRL2_ENCMDCNFMSK |
-		  S3C_SDHCI_CTRL2_ENFBCLKRX |
-		  S3C_SDHCI_CTRL2_DFCNT_NONE |
-		  S3C_SDHCI_CTRL2_ENCLKOUTHOLD);
-
-	if (ios->clock < 25 * 1000000)
-		ctrl3 = (S3C_SDHCI_CTRL3_FCSEL3 |
-			 S3C_SDHCI_CTRL3_FCSEL2 |
-			 S3C_SDHCI_CTRL3_FCSEL1 |
-			 S3C_SDHCI_CTRL3_FCSEL0);
-	else
-		ctrl3 = (S3C_SDHCI_CTRL3_FCSEL1 | S3C_SDHCI_CTRL3_FCSEL0);
-
-	__raw_writel(ctrl2, r + S3C_SDHCI_CONTROL2);
-	__raw_writel(ctrl3, r + S3C_SDHCI_CONTROL3);
-}

arch/arm/mach-s3c2440/Kconfig

@@ -5,10 +5,8 @@
 config CPU_S3C2440
 	bool
 	select CPU_ARM920T
-	select S3C_GPIO_PULL_UP
 	select S3C2410_CLOCK
 	select S3C2410_PM if PM
-	select S3C2410_GPIO
 	select S3C2440_DMA if S3C2410_DMA
 	select CPU_S3C244X
 	select CPU_LLSERIAL_S3C2440
@@ -18,9 +16,7 @@ config CPU_S3C2440
 config CPU_S3C2442
 	bool
 	select CPU_ARM920T
-	select S3C_GPIO_PULL_DOWN
 	select S3C2410_CLOCK
-	select S3C2410_GPIO
 	select S3C2410_PM if PM
 	select CPU_S3C244X
 	select CPU_LLSERIAL_S3C2440

arch/arm/mach-s3c2440/dma.c

@@ -48,38 +48,26 @@ static struct s3c24xx_dma_map __initdata s3c2440_dma_mappings[] = {
 		.channels[1]	= S3C2440_DCON_CH1_SDI | DMA_CH_VALID,
 		.channels[2]	= S3C2410_DCON_CH2_SDI | DMA_CH_VALID,
 		.channels[3]	= S3C2410_DCON_CH3_SDI | DMA_CH_VALID,
-		.hw_addr.to	= S3C2410_PA_IIS + S3C2410_IISFIFO,
-		.hw_addr.from	= S3C2410_PA_IIS + S3C2410_IISFIFO,
 	},
 	[DMACH_SPI0] = {
 		.name		= "spi0",
 		.channels[1]	= S3C2410_DCON_CH1_SPI | DMA_CH_VALID,
-		.hw_addr.to	= S3C2410_PA_SPI + S3C2410_SPTDAT,
-		.hw_addr.from	= S3C2410_PA_SPI + S3C2410_SPRDAT,
 	},
 	[DMACH_SPI1] = {
 		.name		= "spi1",
 		.channels[3]	= S3C2410_DCON_CH3_SPI | DMA_CH_VALID,
-		.hw_addr.to	= S3C2410_PA_SPI + 0x20 + S3C2410_SPTDAT,
-		.hw_addr.from	= S3C2410_PA_SPI + 0x20 + S3C2410_SPRDAT,
 	},
 	[DMACH_UART0] = {
 		.name		= "uart0",
 		.channels[0]	= S3C2410_DCON_CH0_UART0 | DMA_CH_VALID,
-		.hw_addr.to	= S3C2410_PA_UART0 + S3C2410_UTXH,
-		.hw_addr.from	= S3C2410_PA_UART0 + S3C2410_URXH,
 	},
 	[DMACH_UART1] = {
 		.name		= "uart1",
 		.channels[1]	= S3C2410_DCON_CH1_UART1 | DMA_CH_VALID,
-		.hw_addr.to	= S3C2410_PA_UART1 + S3C2410_UTXH,
-		.hw_addr.from	= S3C2410_PA_UART1 + S3C2410_URXH,
 	},
       	[DMACH_UART2] = {
 		.name		= "uart2",
 		.channels[3]	= S3C2410_DCON_CH3_UART2 | DMA_CH_VALID,
-		.hw_addr.to	= S3C2410_PA_UART2 + S3C2410_UTXH,
-		.hw_addr.from	= S3C2410_PA_UART2 + S3C2410_URXH,
 	},
 	[DMACH_TIMER] = {
 		.name		= "timer",
@@ -91,31 +79,26 @@ static struct s3c24xx_dma_map __initdata s3c2440_dma_mappings[] = {
 		.name		= "i2s-sdi",
 		.channels[1]	= S3C2410_DCON_CH1_I2SSDI | DMA_CH_VALID,
 		.channels[2]	= S3C2410_DCON_CH2_I2SSDI | DMA_CH_VALID,
-		.hw_addr.from	= S3C2410_PA_IIS + S3C2410_IISFIFO,
 	},
 	[DMACH_I2S_OUT] = {
 		.name		= "i2s-sdo",
 		.channels[0]	= S3C2440_DCON_CH0_I2SSDO | DMA_CH_VALID,
 		.channels[2]	= S3C2410_DCON_CH2_I2SSDO | DMA_CH_VALID,
-		.hw_addr.to	= S3C2410_PA_IIS + S3C2410_IISFIFO,
 	},
 	[DMACH_PCM_IN] = {
 		.name		= "pcm-in",
 		.channels[0]	= S3C2440_DCON_CH0_PCMIN | DMA_CH_VALID,
 		.channels[2]	= S3C2440_DCON_CH2_PCMIN | DMA_CH_VALID,
-		.hw_addr.from	= S3C2440_PA_AC97 + S3C_AC97_PCM_DATA,
 	},
 	[DMACH_PCM_OUT] = {
 		.name		= "pcm-out",
 		.channels[1]	= S3C2440_DCON_CH1_PCMOUT | DMA_CH_VALID,
 		.channels[3]	= S3C2440_DCON_CH3_PCMOUT | DMA_CH_VALID,
-		.hw_addr.to	= S3C2440_PA_AC97 + S3C_AC97_PCM_DATA,
 	},
 	[DMACH_MIC_IN] = {
 		.name		= "mic-in",
 		.channels[2]	= S3C2440_DCON_CH2_MICIN | DMA_CH_VALID,
 		.channels[3]	= S3C2440_DCON_CH3_MICIN | DMA_CH_VALID,
-		.hw_addr.from	= S3C2440_PA_AC97 + S3C_AC97_MIC_DATA,
 	},
 	[DMACH_USB_EP1] = {
 		.name		= "usb-ep1",

arch/arm/mach-s3c2440/s3c2440.c

@@ -68,6 +68,6 @@ void __init s3c2440_map_io(void)
 {
 	s3c244x_map_io();
 
-	s3c24xx_gpiocfg_default.set_pull = s3c_gpio_setpull_1up;
-	s3c24xx_gpiocfg_default.get_pull = s3c_gpio_getpull_1up;
+	s3c24xx_gpiocfg_default.set_pull = s3c24xx_gpio_setpull_1up;
+	s3c24xx_gpiocfg_default.get_pull = s3c24xx_gpio_getpull_1up;
 }

arch/arm/mach-s3c2440/s3c2442.c

@@ -180,6 +180,6 @@ void __init s3c2442_map_io(void)
 {
 	s3c244x_map_io();
 
-	s3c24xx_gpiocfg_default.set_pull = s3c_gpio_setpull_1down;
-	s3c24xx_gpiocfg_default.get_pull = s3c_gpio_getpull_1down;
+	s3c24xx_gpiocfg_default.set_pull = s3c24xx_gpio_setpull_1down;
+	s3c24xx_gpiocfg_default.get_pull = s3c24xx_gpio_getpull_1down;
 }

arch/arm/mach-s3c2443/Kconfig

@@ -10,7 +10,6 @@ config CPU_S3C2443
 	select CPU_LLSERIAL_S3C2440
 	select SAMSUNG_CLKSRC
 	select S3C2443_CLOCK
-	select S3C_GPIO_PULL_S3C2443
 	help
 	  Support for the S3C2443 SoC from the S3C24XX line
 

arch/arm/mach-s3c2443/clock.c

@@ -57,10 +57,6 @@
 
 /* clock selections */
 
-static struct clk clk_i2s_ext = {
-	.name		= "i2s-ext",
-};
-
 /* armdiv
  *
  * this clock is sourced from msysclk and can have a number of
@@ -128,7 +124,7 @@ static int s3c2443_armclk_setrate(struct clk *clk, unsigned long rate)
 		unsigned long clkcon0;
 
 		clkcon0 = __raw_readl(S3C2443_CLKDIV0);
-		clkcon0 &= S3C2443_CLKDIV0_ARMDIV_MASK;
+		clkcon0 &= ~S3C2443_CLKDIV0_ARMDIV_MASK;
 		clkcon0 |= val << S3C2443_CLKDIV0_ARMDIV_SHIFT;
 		__raw_writel(clkcon0, S3C2443_CLKDIV0);
 	}
@@ -173,7 +169,7 @@ static struct clksrc_clk clk_arm = {
 
 static struct clksrc_clk clk_hsspi = {
 	.clk	= {
-		.name		= "hsspi",
+		.name		= "hsspi-if",
 		.parent		= &clk_esysclk.clk,
 		.ctrlbit	= S3C2443_SCLKCON_HSSPICLK,
 		.enable		= s3c2443_clkcon_enable_s,
@@ -235,48 +231,6 @@ static struct clk clk_hsmmc = {
 	},
 };
 
-/* i2s_eplldiv
- *
- * This clock is the output from the I2S divisor of ESYSCLK, and is separate
- * from the mux that comes after it (cannot merge into one single clock)
-*/
-
-static struct clksrc_clk clk_i2s_eplldiv = {
-	.clk	= {
-		.name		= "i2s-eplldiv",
-		.parent		= &clk_esysclk.clk,
-	},
-	.reg_div = { .reg = S3C2443_CLKDIV1, .size = 4, .shift = 12, },
-};
-
-/* i2s-ref
- *
- * i2s bus reference clock, selectable from external, esysclk or epllref
- *
- * Note, this used to be two clocks, but was compressed into one.
-*/
-
-struct clk *clk_i2s_srclist[] = {
-	[0] = &clk_i2s_eplldiv.clk,
-	[1] = &clk_i2s_ext,
-	[2] = &clk_epllref.clk,
-	[3] = &clk_epllref.clk,
-};
-
-static struct clksrc_clk clk_i2s = {
-	.clk	= {
-		.name		= "i2s-if",
-		.ctrlbit	= S3C2443_SCLKCON_I2SCLK,
-		.enable		= s3c2443_clkcon_enable_s,
-
-	},
-	.sources = &(struct clksrc_sources) {
-		.sources = clk_i2s_srclist,
-		.nr_sources = ARRAY_SIZE(clk_i2s_srclist),
-	},
-	.reg_src = { .reg = S3C2443_CLKSRC, .size = 2, .shift = 14 },
-};
-
 /* standard clock definitions */
 
 static struct clk init_clocks_off[] = {
@@ -285,11 +239,6 @@ static struct clk init_clocks_off[] = {
 		.parent		= &clk_p,
 		.enable		= s3c2443_clkcon_enable_p,
 		.ctrlbit	= S3C2443_PCLKCON_SDI,
-	}, {
-		.name		= "iis",
-		.parent		= &clk_p,
-		.enable		= s3c2443_clkcon_enable_p,
-		.ctrlbit	= S3C2443_PCLKCON_IIS,
 	}, {
 		.name		= "spi",
 		.devname	= "s3c2410-spi.0",
@@ -312,8 +261,6 @@ static struct clk init_clocks[] = {
 
 static struct clksrc_clk *clksrcs[] __initdata = {
 	&clk_arm,
-	&clk_i2s_eplldiv,
-	&clk_i2s,
 	&clk_hsspi,
 	&clk_hsmmc_div,
 };

arch/arm/mach-s3c2443/dma.c

@@ -54,68 +54,46 @@ static struct s3c24xx_dma_map __initdata s3c2443_dma_mappings[] = {
 	[DMACH_SDI] = {
 		.name		= "sdi",
 		.channels	= MAP(S3C2443_DMAREQSEL_SDI),
-		.hw_addr.to	= S3C2410_PA_IIS + S3C2410_IISFIFO,
-		.hw_addr.from	= S3C2410_PA_IIS + S3C2410_IISFIFO,
 	},
 	[DMACH_SPI0] = {
 		.name		= "spi0",
 		.channels	= MAP(S3C2443_DMAREQSEL_SPI0TX),
-		.hw_addr.to	= S3C2410_PA_SPI + S3C2410_SPTDAT,
-		.hw_addr.from	= S3C2410_PA_SPI + S3C2410_SPRDAT,
 	},
 	[DMACH_SPI1] = {
 		.name		= "spi1",
 		.channels	= MAP(S3C2443_DMAREQSEL_SPI1TX),
-		.hw_addr.to	= S3C2410_PA_SPI + 0x20 + S3C2410_SPTDAT,
-		.hw_addr.from	= S3C2410_PA_SPI + 0x20 + S3C2410_SPRDAT,
 	},
 	[DMACH_UART0] = {
 		.name		= "uart0",
 		.channels	= MAP(S3C2443_DMAREQSEL_UART0_0),
-		.hw_addr.to	= S3C2410_PA_UART0 + S3C2410_UTXH,
-		.hw_addr.from	= S3C2410_PA_UART0 + S3C2410_URXH,
 	},
 	[DMACH_UART1] = {
 		.name		= "uart1",
 		.channels	= MAP(S3C2443_DMAREQSEL_UART1_0),
-		.hw_addr.to	= S3C2410_PA_UART1 + S3C2410_UTXH,
-		.hw_addr.from	= S3C2410_PA_UART1 + S3C2410_URXH,
 	},
       	[DMACH_UART2] = {
 		.name		= "uart2",
 		.channels	= MAP(S3C2443_DMAREQSEL_UART2_0),
-		.hw_addr.to	= S3C2410_PA_UART2 + S3C2410_UTXH,
-		.hw_addr.from	= S3C2410_PA_UART2 + S3C2410_URXH,
 	},
       	[DMACH_UART3] = {
 		.name		= "uart3",
 		.channels	= MAP(S3C2443_DMAREQSEL_UART3_0),
-		.hw_addr.to	= S3C2443_PA_UART3 + S3C2410_UTXH,
-		.hw_addr.from	= S3C2443_PA_UART3 + S3C2410_URXH,
 	},
 	[DMACH_UART0_SRC2] = {
 		.name		= "uart0",
 		.channels	= MAP(S3C2443_DMAREQSEL_UART0_1),
-		.hw_addr.to	= S3C2410_PA_UART0 + S3C2410_UTXH,
-		.hw_addr.from	= S3C2410_PA_UART0 + S3C2410_URXH,
 	},
 	[DMACH_UART1_SRC2] = {
 		.name		= "uart1",
 		.channels	= MAP(S3C2443_DMAREQSEL_UART1_1),
-		.hw_addr.to	= S3C2410_PA_UART1 + S3C2410_UTXH,
-		.hw_addr.from	= S3C2410_PA_UART1 + S3C2410_URXH,
 	},
       	[DMACH_UART2_SRC2] = {
 		.name		= "uart2",
 		.channels	= MAP(S3C2443_DMAREQSEL_UART2_1),
-		.hw_addr.to	= S3C2410_PA_UART2 + S3C2410_UTXH,
-		.hw_addr.from	= S3C2410_PA_UART2 + S3C2410_URXH,
 	},
       	[DMACH_UART3_SRC2] = {
 		.name		= "uart3",
 		.channels	= MAP(S3C2443_DMAREQSEL_UART3_1),
-		.hw_addr.to	= S3C2443_PA_UART3 + S3C2410_UTXH,
-		.hw_addr.from	= S3C2443_PA_UART3 + S3C2410_URXH,
 	},
 	[DMACH_TIMER] = {
 		.name		= "timer",
@@ -124,27 +102,22 @@ static struct s3c24xx_dma_map __initdata s3c2443_dma_mappings[] = {
 	[DMACH_I2S_IN] = {
 		.name		= "i2s-sdi",
 		.channels	= MAP(S3C2443_DMAREQSEL_I2SRX),
-		.hw_addr.from	= S3C2410_PA_IIS + S3C2410_IISFIFO,
 	},
 	[DMACH_I2S_OUT] = {
 		.name		= "i2s-sdo",
 		.channels	= MAP(S3C2443_DMAREQSEL_I2STX),
-		.hw_addr.to	= S3C2410_PA_IIS + S3C2410_IISFIFO,
 	},
 	[DMACH_PCM_IN] = {
 		.name		= "pcm-in",
 		.channels	= MAP(S3C2443_DMAREQSEL_PCMIN),
-		.hw_addr.from	= S3C2440_PA_AC97 + S3C_AC97_PCM_DATA,
 	},
 	[DMACH_PCM_OUT] = {
 		.name		= "pcm-out",
 		.channels	= MAP(S3C2443_DMAREQSEL_PCMOUT),
-		.hw_addr.to	= S3C2440_PA_AC97 + S3C_AC97_PCM_DATA,
 	},
 	[DMACH_MIC_IN] = {
 		.name		= "mic-in",
 		.channels	= MAP(S3C2443_DMAREQSEL_MICIN),
-		.hw_addr.from	= S3C2440_PA_AC97 + S3C_AC97_MIC_DATA,
 	},
 };
 

arch/arm/mach-s3c2443/s3c2443.c

@@ -90,8 +90,8 @@ void __init s3c2443_init_uarts(struct s3c2410_uartcfg *cfg, int no)
 
 void __init s3c2443_map_io(void)
 {
-	s3c24xx_gpiocfg_default.set_pull = s3c_gpio_setpull_s3c2443;
-	s3c24xx_gpiocfg_default.get_pull = s3c_gpio_getpull_s3c2443;
+	s3c24xx_gpiocfg_default.set_pull = s3c2443_gpio_setpull;
+	s3c24xx_gpiocfg_default.get_pull = s3c2443_gpio_getpull;
 
 	iotable_init(s3c2443_iodesc, ARRAY_SIZE(s3c2443_iodesc));
 }

arch/arm/mach-s3c64xx/Kconfig

@@ -288,5 +288,6 @@ config MACH_WLF_CRAGG_6410
 	select S3C_DEV_RTC
 	select S3C64XX_DEV_SPI
 	select S3C24XX_GPIO_EXTRA128
+	select I2C
 	help
 	  Machine support for the Wolfson Cragganmore S3C6410 variant.

arch/arm/mach-s3c64xx/Makefile

@@ -13,7 +13,6 @@ obj-				:=
 # Core files
 obj-y				+= cpu.o
 obj-y				+= clock.o
-obj-y				+= gpiolib.o
 
 # Core support for S3C6400 system
 
@@ -55,7 +54,7 @@ obj-$(CONFIG_MACH_HMT)		+= mach-hmt.o
 obj-$(CONFIG_MACH_SMARTQ)	+= mach-smartq.o
 obj-$(CONFIG_MACH_SMARTQ5)	+= mach-smartq5.o
 obj-$(CONFIG_MACH_SMARTQ7)	+= mach-smartq7.o
-obj-$(CONFIG_MACH_WLF_CRAGG_6410) += mach-crag6410.o
+obj-$(CONFIG_MACH_WLF_CRAGG_6410) += mach-crag6410.o mach-crag6410-module.o
 
 # device support
 

arch/arm/mach-s3c64xx/clock.c

@@ -25,13 +25,13 @@
 
 #include <mach/regs-sys.h>
 #include <mach/regs-clock.h>
-#include <mach/pll.h>
 
 #include <plat/cpu.h>
 #include <plat/devs.h>
 #include <plat/cpu-freq.h>
 #include <plat/clock.h>
 #include <plat/clock-clksrc.h>
+#include <plat/pll.h>
 
 /* fin_apll, fin_mpll and fin_epll are all the same clock, which we call
  * ext_xtal_mux for want of an actual name from the manual.
@@ -735,7 +735,8 @@ void __init_or_cpufreq s3c6400_setup_clocks(void)
 	/* For now assume the mux always selects the crystal */
 	clk_ext_xtal_mux.parent = xtal_clk;
 
-	epll = s3c6400_get_epll(xtal);
+	epll = s3c_get_pll6553x(xtal, __raw_readl(S3C_EPLL_CON0),
+				__raw_readl(S3C_EPLL_CON1));
 	mpll = s3c6400_get_pll(xtal, __raw_readl(S3C_MPLL_CON));
 	apll = s3c6400_get_pll(xtal, __raw_readl(S3C_APLL_CON));
 
@@ -744,7 +745,13 @@ void __init_or_cpufreq s3c6400_setup_clocks(void)
 	printk(KERN_INFO "S3C64XX: PLL settings, A=%ld, M=%ld, E=%ld\n",
 	       apll, mpll, epll);
 
-	hclk2 = mpll / GET_DIV(clkdiv0, S3C6400_CLKDIV0_HCLK2);
+	if(__raw_readl(S3C64XX_OTHERS) & S3C64XX_OTHERS_SYNCMUXSEL)
+		/* Synchronous mode */
+		hclk2 = apll / GET_DIV(clkdiv0, S3C6400_CLKDIV0_HCLK2);
+	else
+		/* Asynchronous mode */
+		hclk2 = mpll / GET_DIV(clkdiv0, S3C6400_CLKDIV0_HCLK2);
+
 	hclk = hclk2 / GET_DIV(clkdiv0, S3C6400_CLKDIV0_HCLK);
 	pclk = hclk2 / GET_DIV(clkdiv0, S3C6400_CLKDIV0_PCLK);
 

arch/arm/mach-s3c64xx/cpu.c

@@ -33,8 +33,8 @@
 #include <plat/devs.h>
 #include <plat/clock.h>
 
-#include <mach/s3c6400.h>
-#include <mach/s3c6410.h>
+#include <plat/s3c6400.h>
+#include <plat/s3c6410.h>
 
 /* table of supported CPUs */
 
@@ -43,16 +43,16 @@ static const char name_s3c6410[] = "S3C6410";
 
 static struct cpu_table cpu_ids[] __initdata = {
 	{
-		.idcode		= 0x36400000,
-		.idmask		= 0xfffff000,
+		.idcode		= S3C6400_CPU_ID,
+		.idmask		= S3C64XX_CPU_MASK,
 		.map_io		= s3c6400_map_io,
 		.init_clocks	= s3c6400_init_clocks,
 		.init_uarts	= s3c6400_init_uarts,
 		.init		= s3c6400_init,
 		.name		= name_s3c6400,
 	}, {
-		.idcode		= 0x36410100,
-		.idmask		= 0xffffff00,
+		.idcode		= S3C6410_CPU_ID,
+		.idmask		= S3C64XX_CPU_MASK,
 		.map_io		= s3c6410_map_io,
 		.init_clocks	= s3c6410_init_clocks,
 		.init_uarts	= s3c6410_init_uarts,
@@ -140,22 +140,14 @@ void __init s3c6400_common_init_uarts(struct s3c2410_uartcfg *cfg, int no)
 
 void __init s3c64xx_init_io(struct map_desc *mach_desc, int size)
 {
-	unsigned long idcode;
-
 	/* initialise the io descriptors we need for initialisation */
 	iotable_init(s3c_iodesc, ARRAY_SIZE(s3c_iodesc));
 	iotable_init(mach_desc, size);
 
-	idcode = __raw_readl(S3C_VA_SYS + 0x118);
-	if (!idcode) {
-		/* S3C6400 has the ID register in a different place,
-		 * and needs a write before it can be read. */
-
-		__raw_writel(0x0, S3C_VA_SYS + 0xA1C);
-		idcode = __raw_readl(S3C_VA_SYS + 0xA1C);
-	}
+	/* detect cpu id */
+	s3c64xx_init_cpu();
 
-	s3c_init_cpu(idcode, cpu_ids, ARRAY_SIZE(cpu_ids));
+	s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids));
 }
 
 static __init int s3c64xx_sysdev_init(void)

arch/arm/mach-s3c64xx/dma.c

@@ -147,14 +147,14 @@ static void s3c64xx_dma_fill_lli(struct s3c2410_dma_chan *chan,
 	u32 control0, control1;
 
 	switch (chan->source) {
-	case S3C2410_DMASRC_HW:
+	case DMA_FROM_DEVICE:
 		src = chan->dev_addr;
 		dst = data;
 		control0 = PL080_CONTROL_SRC_AHB2;
 		control0 |= PL080_CONTROL_DST_INCR;
 		break;
 
-	case S3C2410_DMASRC_MEM:
+	case DMA_TO_DEVICE:
 		src = data;
 		dst = chan->dev_addr;
 		control0 = PL080_CONTROL_DST_AHB2;
@@ -416,7 +416,7 @@ EXPORT_SYMBOL(s3c2410_dma_enqueue);
 
 
 int s3c2410_dma_devconfig(enum dma_ch channel,
-			  enum s3c2410_dmasrc source,
+			  enum dma_data_direction source,
 			  unsigned long devaddr)
 {
 	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
@@ -437,11 +437,11 @@ int s3c2410_dma_devconfig(enum dma_ch channel,
 	pr_debug("%s: peripheral %d\n", __func__, peripheral);
 
 	switch (source) {
-	case S3C2410_DMASRC_HW:
+	case DMA_FROM_DEVICE:
 		config = 2 << PL080_CONFIG_FLOW_CONTROL_SHIFT;
 		config |= peripheral << PL080_CONFIG_SRC_SEL_SHIFT;
 		break;
-	case S3C2410_DMASRC_MEM:
+	case DMA_TO_DEVICE:
 		config = 1 << PL080_CONFIG_FLOW_CONTROL_SHIFT;
 		config |= peripheral << PL080_CONFIG_DST_SEL_SHIFT;
 		break;
@@ -740,7 +740,7 @@ static int __init s3c64xx_dma_init(void)
 	}
 
 	/* Set all DMA configuration to be DMA, not SDMA */
-	writel(0xffffff, S3C_SYSREG(0x110));
+	writel(0xffffff, S3C64XX_SDMA_SEL);
 
 	/* Register standard DMA controllers */
 	s3c64xx_dma_init1(0, DMACH_UART0, IRQ_DMA0, 0x75000000);

arch/arm/mach-s3c64xx/gpiolib.c

@@ -1,290 +0,0 @@
-/* arch/arm/plat-s3c64xx/gpiolib.c
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *      Ben Dooks <ben@simtec.co.uk>
- *      http://armlinux.simtec.co.uk/
- *
- * S3C64XX - GPIOlib support 
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-
-#include <mach/map.h>
-
-#include <plat/gpio-core.h>
-#include <plat/gpio-cfg.h>
-#include <plat/gpio-cfg-helpers.h>
-#include <mach/regs-gpio.h>
-
-/* GPIO bank summary:
- *
- * Bank	GPIOs	Style	SlpCon	ExtInt Group
- * A	8	4Bit	Yes	1
- * B	7	4Bit	Yes	1
- * C	8	4Bit	Yes	2
- * D	5	4Bit	Yes	3
- * E	5	4Bit	Yes	None
- * F	16	2Bit	Yes	4 [1]
- * G	7	4Bit	Yes	5
- * H	10	4Bit[2]	Yes	6
- * I	16	2Bit	Yes	None
- * J	12	2Bit	Yes	None
- * K	16	4Bit[2]	No	None
- * L	15	4Bit[2] No	None
- * M	6	4Bit	No	IRQ_EINT
- * N	16	2Bit	No	IRQ_EINT
- * O	16	2Bit	Yes	7
- * P	15	2Bit	Yes	8
- * Q	9	2Bit	Yes	9
- *
- * [1] BANKF pins 14,15 do not form part of the external interrupt sources
- * [2] BANK has two control registers, GPxCON0 and GPxCON1
- */
-
-static struct s3c_gpio_cfg gpio_4bit_cfg_noint = {
-	.set_config	= s3c_gpio_setcfg_s3c64xx_4bit,
-	.get_config	= s3c_gpio_getcfg_s3c64xx_4bit,
-	.set_pull	= s3c_gpio_setpull_updown,
-	.get_pull	= s3c_gpio_getpull_updown,
-};
-
-static struct s3c_gpio_cfg gpio_4bit_cfg_eint0111 = {
-	.cfg_eint	= 7,
-	.set_config	= s3c_gpio_setcfg_s3c64xx_4bit,
-	.get_config	= s3c_gpio_getcfg_s3c64xx_4bit,
-	.set_pull	= s3c_gpio_setpull_updown,
-	.get_pull	= s3c_gpio_getpull_updown,
-};
-
-static struct s3c_gpio_cfg gpio_4bit_cfg_eint0011 = {
-	.cfg_eint	= 3,
-	.get_config	= s3c_gpio_getcfg_s3c64xx_4bit,
-	.set_config	= s3c_gpio_setcfg_s3c64xx_4bit,
-	.set_pull	= s3c_gpio_setpull_updown,
-	.get_pull	= s3c_gpio_getpull_updown,
-};
-
-static int s3c64xx_gpio2int_gpm(struct gpio_chip *chip, unsigned pin)
-{
-	return pin < 5 ? IRQ_EINT(23) + pin : -ENXIO;
-}
-
-static struct s3c_gpio_chip gpio_4bit[] = {
-	{
-		.base	= S3C64XX_GPA_BASE,
-		.config	= &gpio_4bit_cfg_eint0111,
-		.chip	= {
-			.base	= S3C64XX_GPA(0),
-			.ngpio	= S3C64XX_GPIO_A_NR,
-			.label	= "GPA",
-		},
-	}, {
-		.base	= S3C64XX_GPB_BASE,
-		.config	= &gpio_4bit_cfg_eint0111,
-		.chip	= {
-			.base	= S3C64XX_GPB(0),
-			.ngpio	= S3C64XX_GPIO_B_NR,
-			.label	= "GPB",
-		},
-	}, {
-		.base	= S3C64XX_GPC_BASE,
-		.config	= &gpio_4bit_cfg_eint0111,
-		.chip	= {
-			.base	= S3C64XX_GPC(0),
-			.ngpio	= S3C64XX_GPIO_C_NR,
-			.label	= "GPC",
-		},
-	}, {
-		.base	= S3C64XX_GPD_BASE,
-		.config	= &gpio_4bit_cfg_eint0111,
-		.chip	= {
-			.base	= S3C64XX_GPD(0),
-			.ngpio	= S3C64XX_GPIO_D_NR,
-			.label	= "GPD",
-		},
-	}, {
-		.base	= S3C64XX_GPE_BASE,
-		.config	= &gpio_4bit_cfg_noint,
-		.chip	= {
-			.base	= S3C64XX_GPE(0),
-			.ngpio	= S3C64XX_GPIO_E_NR,
-			.label	= "GPE",
-		},
-	}, {
-		.base	= S3C64XX_GPG_BASE,
-		.config	= &gpio_4bit_cfg_eint0111,
-		.chip	= {
-			.base	= S3C64XX_GPG(0),
-			.ngpio	= S3C64XX_GPIO_G_NR,
-			.label	= "GPG",
-		},
-	}, {
-		.base	= S3C64XX_GPM_BASE,
-		.config	= &gpio_4bit_cfg_eint0011,
-		.chip	= {
-			.base	= S3C64XX_GPM(0),
-			.ngpio	= S3C64XX_GPIO_M_NR,
-			.label	= "GPM",
-			.to_irq = s3c64xx_gpio2int_gpm,
-		},
-	},
-};
-
-static int s3c64xx_gpio2int_gpl(struct gpio_chip *chip, unsigned pin)
-{
-	return pin >= 8 ? IRQ_EINT(16) + pin - 8 : -ENXIO;
-}
-
-static struct s3c_gpio_chip gpio_4bit2[] = {
-	{
-		.base	= S3C64XX_GPH_BASE + 0x4,
-		.config	= &gpio_4bit_cfg_eint0111,
-		.chip	= {
-			.base	= S3C64XX_GPH(0),
-			.ngpio	= S3C64XX_GPIO_H_NR,
-			.label	= "GPH",
-		},
-	}, {
-		.base	= S3C64XX_GPK_BASE + 0x4,
-		.config	= &gpio_4bit_cfg_noint,
-		.chip	= {
-			.base	= S3C64XX_GPK(0),
-			.ngpio	= S3C64XX_GPIO_K_NR,
-			.label	= "GPK",
-		},
-	}, {
-		.base	= S3C64XX_GPL_BASE + 0x4,
-		.config	= &gpio_4bit_cfg_eint0011,
-		.chip	= {
-			.base	= S3C64XX_GPL(0),
-			.ngpio	= S3C64XX_GPIO_L_NR,
-			.label	= "GPL",
-			.to_irq = s3c64xx_gpio2int_gpl,
-		},
-	},
-};
-
-static struct s3c_gpio_cfg gpio_2bit_cfg_noint = {
-	.set_config	= s3c_gpio_setcfg_s3c24xx,
-	.get_config	= s3c_gpio_getcfg_s3c24xx,
-	.set_pull	= s3c_gpio_setpull_updown,
-	.get_pull	= s3c_gpio_getpull_updown,
-};
-
-static struct s3c_gpio_cfg gpio_2bit_cfg_eint10 = {
-	.cfg_eint	= 2,
-	.set_config	= s3c_gpio_setcfg_s3c24xx,
-	.get_config	= s3c_gpio_getcfg_s3c24xx,
-	.set_pull	= s3c_gpio_setpull_updown,
-	.get_pull	= s3c_gpio_getpull_updown,
-};
-
-static struct s3c_gpio_cfg gpio_2bit_cfg_eint11 = {
-	.cfg_eint	= 3,
-	.set_config	= s3c_gpio_setcfg_s3c24xx,
-	.get_config	= s3c_gpio_getcfg_s3c24xx,
-	.set_pull	= s3c_gpio_setpull_updown,
-	.get_pull	= s3c_gpio_getpull_updown,
-};
-
-static struct s3c_gpio_chip gpio_2bit[] = {
-	{
-		.base	= S3C64XX_GPF_BASE,
-		.config	= &gpio_2bit_cfg_eint11,
-		.chip	= {
-			.base	= S3C64XX_GPF(0),
-			.ngpio	= S3C64XX_GPIO_F_NR,
-			.label	= "GPF",
-		},
-	}, {
-		.base	= S3C64XX_GPI_BASE,
-		.config	= &gpio_2bit_cfg_noint,
-		.chip	= {
-			.base	= S3C64XX_GPI(0),
-			.ngpio	= S3C64XX_GPIO_I_NR,
-			.label	= "GPI",
-		},
-	}, {
-		.base	= S3C64XX_GPJ_BASE,
-		.config	= &gpio_2bit_cfg_noint,
-		.chip	= {
-			.base	= S3C64XX_GPJ(0),
-			.ngpio	= S3C64XX_GPIO_J_NR,
-			.label	= "GPJ",
-		},
-	}, {
-		.base	= S3C64XX_GPN_BASE,
-		.irq_base = IRQ_EINT(0),
-		.config	= &gpio_2bit_cfg_eint10,
-		.chip	= {
-			.base	= S3C64XX_GPN(0),
-			.ngpio	= S3C64XX_GPIO_N_NR,
-			.label	= "GPN",
-			.to_irq = samsung_gpiolib_to_irq,
-		},
-	}, {
-		.base	= S3C64XX_GPO_BASE,
-		.config	= &gpio_2bit_cfg_eint11,
-		.chip	= {
-			.base	= S3C64XX_GPO(0),
-			.ngpio	= S3C64XX_GPIO_O_NR,
-			.label	= "GPO",
-		},
-	}, {
-		.base	= S3C64XX_GPP_BASE,
-		.config	= &gpio_2bit_cfg_eint11,
-		.chip	= {
-			.base	= S3C64XX_GPP(0),
-			.ngpio	= S3C64XX_GPIO_P_NR,
-			.label	= "GPP",
-		},
-	}, {
-		.base	= S3C64XX_GPQ_BASE,
-		.config	= &gpio_2bit_cfg_eint11,
-		.chip	= {
-			.base	= S3C64XX_GPQ(0),
-			.ngpio	= S3C64XX_GPIO_Q_NR,
-			.label	= "GPQ",
-		},
-	},
-};
-
-static __init void s3c64xx_gpiolib_add_2bit(struct s3c_gpio_chip *chip)
-{
-	chip->pm = __gpio_pm(&s3c_gpio_pm_2bit);
-}
-
-static __init void s3c64xx_gpiolib_add(struct s3c_gpio_chip *chips,
-				       int nr_chips,
-				       void (*fn)(struct s3c_gpio_chip *))
-{
-	for (; nr_chips > 0; nr_chips--, chips++) {
-		if (fn)
-			(fn)(chips);
-		s3c_gpiolib_add(chips);
-	}
-}
-
-static __init int s3c64xx_gpiolib_init(void)
-{
-	s3c64xx_gpiolib_add(gpio_4bit, ARRAY_SIZE(gpio_4bit),
-			    samsung_gpiolib_add_4bit);
-
-	s3c64xx_gpiolib_add(gpio_4bit2, ARRAY_SIZE(gpio_4bit2),
-			    samsung_gpiolib_add_4bit2);
-
-	s3c64xx_gpiolib_add(gpio_2bit, ARRAY_SIZE(gpio_2bit),
-			    s3c64xx_gpiolib_add_2bit);
-
-	return 0;
-}
-
-core_initcall(s3c64xx_gpiolib_init);

arch/arm/mach-s3c64xx/include/mach/clkdev.h

@@ -1,7 +0,0 @@
-#ifndef __MACH_CLKDEV_H__
-#define __MACH_CLKDEV_H__
-
-#define __clk_get(clk) ({ 1; })
-#define __clk_put(clk) do {} while (0)
-
-#endif

arch/arm/mach-s3c64xx/include/mach/crag6410.h

@@ -0,0 +1,23 @@
+/* Cragganmore 6410 shared definitions
+ *
+ * Copyright 2011 Wolfson Microelectronics plc
+ *	Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef MACH_CRAG6410_H
+#define MACH_CRAG6410_H
+
+#include <linux/gpio.h>
+
+#define BANFF_PMIC_IRQ_BASE		IRQ_BOARD_START
+#define GLENFARCLAS_PMIC_IRQ_BASE	(IRQ_BOARD_START + 64)
+
+#define PCA935X_GPIO_BASE		GPIO_BOARD_START
+#define CODEC_GPIO_BASE		(GPIO_BOARD_START + 8)
+#define GLENFARCLAS_PMIC_GPIO_BASE	(GPIO_BOARD_START + 16)
+
+#endif

arch/arm/mach-s3c64xx/include/mach/dma.h

@@ -58,11 +58,15 @@ enum dma_ch {
 	DMACH_MAX		/* the end */
 };
 
-static __inline__ bool s3c_dma_has_circular(void)
+static inline bool samsung_dma_has_circular(void)
 {
 	return true;
 }
 
+static inline bool samsung_dma_is_dmadev(void)
+{
+	return false;
+}
 #define S3C2410_DMAF_CIRCULAR		(1 << 0)
 
 #include <plat/dma.h>
@@ -95,7 +99,7 @@ struct s3c2410_dma_chan {
 	unsigned char		 peripheral;
 
 	unsigned int		 flags;
-	enum s3c2410_dmasrc	 source;
+	enum dma_data_direction	 source;
 
 
 	dma_addr_t		dev_addr;

arch/arm/mach-s3c64xx/include/mach/map.h

@@ -16,6 +16,7 @@
 #define __ASM_ARCH_MAP_H __FILE__
 
 #include <plat/map-base.h>
+#include <plat/map-s3c.h>
 
 /*
  * Post-mux Chip Select Regions Xm0CSn_
@@ -83,7 +84,6 @@
 #define S3C64XX_PA_IIC1		(0x7F00F000)
 
 #define S3C64XX_PA_GPIO		(0x7F008000)
-#define S3C64XX_VA_GPIO		S3C_ADDR_CPU(0x00000000)
 #define S3C64XX_SZ_GPIO		SZ_4K
 
 #define S3C64XX_PA_SDRAM	(0x50000000)
@@ -94,16 +94,10 @@
 #define S3C64XX_PA_VIC1		(0x71300000)
 
 #define S3C64XX_PA_MODEM	(0x74108000)
-#define S3C64XX_VA_MODEM	S3C_ADDR_CPU(0x00100000)
 
 #define S3C64XX_PA_USBHOST	(0x74300000)
 
 #define S3C64XX_PA_USB_HSPHY	(0x7C100000)
-#define S3C64XX_VA_USB_HSPHY	S3C_ADDR_CPU(0x00200000)
-
-/* place VICs close together */
-#define VA_VIC0			(S3C_VA_IRQ + 0x00)
-#define VA_VIC1			(S3C_VA_IRQ + 0x10000)
 
 /* compatibiltiy defines. */
 #define S3C_PA_TIMER		S3C64XX_PA_TIMER
@@ -119,7 +113,6 @@
 #define S3C_PA_FB		S3C64XX_PA_FB
 #define S3C_PA_USBHOST		S3C64XX_PA_USBHOST
 #define S3C_PA_USB_HSOTG	S3C64XX_PA_USB_HSOTG
-#define S3C_VA_USB_HSPHY	S3C64XX_VA_USB_HSPHY
 #define S3C_PA_RTC		S3C64XX_PA_RTC
 #define S3C_PA_WDT		S3C64XX_PA_WATCHDOG
 

arch/arm/mach-s3c64xx/include/mach/pll.h

@@ -1,45 +0,0 @@
-/* arch/arm/plat-s3c64xx/include/plat/pll.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * S3C64XX PLL code
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#define S3C6400_PLL_MDIV_MASK	((1 << (25-16+1)) - 1)
-#define S3C6400_PLL_PDIV_MASK	((1 << (13-8+1)) - 1)
-#define S3C6400_PLL_SDIV_MASK	((1 << (2-0+1)) - 1)
-#define S3C6400_PLL_MDIV_SHIFT	(16)
-#define S3C6400_PLL_PDIV_SHIFT	(8)
-#define S3C6400_PLL_SDIV_SHIFT	(0)
-
-#include <asm/div64.h>
-#include <plat/pll6553x.h>
-
-static inline unsigned long s3c6400_get_pll(unsigned long baseclk,
-					    u32 pllcon)
-{
-	u32 mdiv, pdiv, sdiv;
-	u64 fvco = baseclk;
-
-	mdiv = (pllcon >> S3C6400_PLL_MDIV_SHIFT) & S3C6400_PLL_MDIV_MASK;
-	pdiv = (pllcon >> S3C6400_PLL_PDIV_SHIFT) & S3C6400_PLL_PDIV_MASK;
-	sdiv = (pllcon >> S3C6400_PLL_SDIV_SHIFT) & S3C6400_PLL_SDIV_MASK;
-
-	fvco *= mdiv;
-	do_div(fvco, (pdiv << sdiv));
-
-	return (unsigned long)fvco;
-}
-
-static inline unsigned long s3c6400_get_epll(unsigned long baseclk)
-{
-	return s3c_get_pll6553x(baseclk, __raw_readl(S3C_EPLL_CON0),
-				__raw_readl(S3C_EPLL_CON1));
-}

arch/arm/mach-s3c64xx/include/mach/pm-core.h

@@ -104,7 +104,7 @@ static inline void s3c_pm_restored_gpios(void)
 	__raw_writel(0, S3C64XX_SLPEN);
 }
 
-static inline void s3c_pm_saved_gpios(void)
+static inline void samsung_pm_saved_gpios(void)
 {
 	/* turn on the sleep mode and keep it there, as it seems that during
 	 * suspend the xCON registers get re-set and thus you can end up with

arch/arm/mach-s3c64xx/include/mach/pwm-clock.h

@@ -1,56 +0,0 @@
-/* linux/arch/arm/mach-s3c6400/include/mach/pwm-clock.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *      Ben Dooks <ben@simtec.co.uk>
- *      http://armlinux.simtec.co.uk/
- *
- * S3C64xx - pwm clock and timer support
- */
-
-/**
- * pwm_cfg_src_is_tclk() - return whether the given mux config is a tclk
- * @tcfg: The timer TCFG1 register bits shifted down to 0.
- *
- * Return true if the given configuration from TCFG1 is a TCLK instead
- * any of the TDIV clocks.
- */
-static inline int pwm_cfg_src_is_tclk(unsigned long tcfg)
-{
-	return tcfg >= S3C64XX_TCFG1_MUX_TCLK;
-}
-
-/**
- * tcfg_to_divisor() - convert tcfg1 setting to a divisor
- * @tcfg1: The tcfg1 setting, shifted down.
- *
- * Get the divisor value for the given tcfg1 setting. We assume the
- * caller has already checked to see if this is not a TCLK source.
- */
-static inline unsigned long tcfg_to_divisor(unsigned long tcfg1)
-{
-	return 1 << tcfg1;
-}
-
-/**
- * pwm_tdiv_has_div1() - does the tdiv setting have a /1
- *
- * Return true if we have a /1 in the tdiv setting.
- */
-static inline unsigned int pwm_tdiv_has_div1(void)
-{
-	return 1;
-}
-
-/**
- * pwm_tdiv_div_bits() - calculate TCFG1 divisor value.
- * @div: The divisor to calculate the bit information for.
- *
- * Turn a divisor into the necessary bit field for TCFG1.
- */
-static inline unsigned long pwm_tdiv_div_bits(unsigned int div)
-{
-	return ilog2(div);
-}
-
-#define S3C_TCFG1_MUX_TCLK S3C64XX_TCFG1_MUX_TCLK

arch/arm/mach-s3c64xx/include/mach/regs-sys.h

@@ -21,8 +21,11 @@
 #define S3C64XX_AHB_CON1	S3C_SYSREG(0x104)
 #define S3C64XX_AHB_CON2	S3C_SYSREG(0x108)
 
+#define S3C64XX_SDMA_SEL	S3C_SYSREG(0x110)
+
 #define S3C64XX_OTHERS		S3C_SYSREG(0x900)
 
 #define S3C64XX_OTHERS_USBMASK	(1 << 16)
+#define S3C64XX_OTHERS_SYNCMUXSEL	(1 << 6)
 
 #endif /* _PLAT_REGS_SYS_H */

arch/arm/mach-s3c64xx/mach-anw6410.c

@@ -45,7 +45,7 @@
 #include <plat/fb.h>
 #include <plat/regs-fb-v4.h>
 
-#include <mach/s3c6410.h>
+#include <plat/s3c6410.h>
 #include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>

arch/arm/mach-s3c64xx/mach-crag6410-module.c

@@ -0,0 +1,182 @@
+/* Speyside modules for Cragganmore - board data probing
+ *
+ * Copyright 2011 Wolfson Microelectronics plc
+ *	Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/i2c.h>
+
+#include <linux/mfd/wm831x/irq.h>
+#include <linux/mfd/wm831x/gpio.h>
+
+#include <sound/wm8996.h>
+#include <sound/wm8962.h>
+#include <sound/wm9081.h>
+
+#include <mach/crag6410.h>
+
+static struct wm8996_retune_mobile_config wm8996_retune[] = {
+	{
+		.name = "Sub LPF",
+		.rate = 48000,
+		.regs = {
+			0x6318, 0x6300, 0x1000, 0x0000, 0x0004, 0x2000, 0xF000,
+			0x0000, 0x0004, 0x2000, 0xF000, 0x0000, 0x0004, 0x2000,
+			0xF000, 0x0000, 0x0004, 0x1000, 0x0800, 0x4000
+		},
+	},
+	{
+		.name = "Sub HPF",
+		.rate = 48000,
+		.regs = {
+			0x000A, 0x6300, 0x1000, 0x0000, 0x0004, 0x2000, 0xF000,
+			0x0000, 0x0004, 0x2000, 0xF000, 0x0000, 0x0004, 0x2000,
+			0xF000, 0x0000, 0x0004, 0x1000, 0x0800, 0x4000
+		},
+	},
+};
+
+static struct wm8996_pdata wm8996_pdata __initdata = {
+	.ldo_ena = S3C64XX_GPN(7),
+	.gpio_base = CODEC_GPIO_BASE,
+	.micdet_def = 1,
+	.inl_mode = WM8996_DIFFERRENTIAL_1,
+	.inr_mode = WM8996_DIFFERRENTIAL_1,
+
+	.irq_flags = IRQF_TRIGGER_RISING,
+
+	.gpio_default = {
+		0x8001, /* GPIO1 == ADCLRCLK1 */
+		0x8001, /* GPIO2 == ADCLRCLK2, input due to CPU */
+		0x0141, /* GPIO3 == HP_SEL */
+		0x0002, /* GPIO4 == IRQ */
+		0x020e, /* GPIO5 == CLKOUT */
+	},
+
+	.retune_mobile_cfgs = wm8996_retune,
+	.num_retune_mobile_cfgs = ARRAY_SIZE(wm8996_retune),
+};
+
+static struct wm8962_pdata wm8962_pdata __initdata = {
+	.gpio_init = {
+		0,
+		WM8962_GPIO_FN_OPCLK,
+		WM8962_GPIO_FN_DMICCLK,
+		0,
+		0x8000 | WM8962_GPIO_FN_DMICDAT,
+		WM8962_GPIO_FN_IRQ,    /* Open drain mode */
+	},
+	.irq_active_low = true,
+};
+
+static struct wm9081_pdata wm9081_pdata __initdata = {
+	.irq_high = false,
+	.irq_cmos = false,
+};
+
+static const struct i2c_board_info wm1254_devs[] = {
+	{ I2C_BOARD_INFO("wm8996", 0x1a),
+	  .platform_data = &wm8996_pdata,
+	  .irq = GLENFARCLAS_PMIC_IRQ_BASE + WM831X_IRQ_GPIO_2,
+	},
+	{ I2C_BOARD_INFO("wm9081", 0x6c),
+	  .platform_data = &wm9081_pdata, },
+};
+
+static const struct i2c_board_info wm1255_devs[] = {
+	{ I2C_BOARD_INFO("wm5100", 0x1a),
+	  .irq = GLENFARCLAS_PMIC_IRQ_BASE + WM831X_IRQ_GPIO_2,
+	},
+	{ I2C_BOARD_INFO("wm9081", 0x6c),
+	  .platform_data = &wm9081_pdata, },
+};
+
+static const struct i2c_board_info wm1259_devs[] = {
+	{ I2C_BOARD_INFO("wm8962", 0x1a),
+	  .platform_data = &wm8962_pdata,
+	  .irq = GLENFARCLAS_PMIC_IRQ_BASE + WM831X_IRQ_GPIO_2,
+	},
+};
+
+
+static __devinitdata const struct {
+	u8 id;
+	const char *name;
+	const struct i2c_board_info *i2c_devs;
+	int num_i2c_devs;
+} gf_mods[] = {
+	{ .id = 0x01, .name = "1250-EV1 Springbank" },
+	{ .id = 0x02, .name = "1251-EV1 Jura" },
+	{ .id = 0x03, .name = "1252-EV1 Glenlivet" },
+	{ .id = 0x11, .name = "6249-EV2 Glenfarclas", },
+	{ .id = 0x21, .name = "1275-EV1 Mortlach" },
+	{ .id = 0x25, .name = "1274-EV1 Glencadam" },
+	{ .id = 0x31, .name = "1253-EV1 Tomatin", },
+	{ .id = 0x39, .name = "1254-EV1 Dallas Dhu",
+	  .i2c_devs = wm1254_devs, .num_i2c_devs = ARRAY_SIZE(wm1254_devs) },
+	{ .id = 0x3a, .name = "1259-EV1 Tobermory",
+	  .i2c_devs = wm1259_devs, .num_i2c_devs = ARRAY_SIZE(wm1259_devs) },
+	{ .id = 0x3b, .name = "1255-EV1 Kilchoman",
+	  .i2c_devs = wm1255_devs, .num_i2c_devs = ARRAY_SIZE(wm1255_devs) },
+	{ .id = 0x3c, .name = "1273-EV1 Longmorn" },
+};
+
+static __devinit int wlf_gf_module_probe(struct i2c_client *i2c,
+					 const struct i2c_device_id *i2c_id)
+{
+	int ret, i, j, id, rev;
+
+	ret = i2c_smbus_read_byte_data(i2c, 0);
+	if (ret < 0) {
+		dev_err(&i2c->dev, "Failed to read ID: %d\n", ret);
+		return ret;
+	}
+
+	id = (ret & 0xfe) >> 2;
+	rev = ret & 0x3;
+	for (i = 0; i < ARRAY_SIZE(gf_mods); i++)
+		if (id == gf_mods[i].id)
+			break;
+
+	if (i < ARRAY_SIZE(gf_mods)) {
+		dev_info(&i2c->dev, "%s revision %d\n",
+			 gf_mods[i].name, rev + 1);
+		for (j = 0; j < gf_mods[i].num_i2c_devs; j++) {
+			if (!i2c_new_device(i2c->adapter,
+					    &(gf_mods[i].i2c_devs[j])))
+				dev_err(&i2c->dev,
+					"Failed to register dev: %d\n", ret);
+		}
+	} else {
+		dev_warn(&i2c->dev, "Unknown module ID %d revision %d\n",
+			 id, rev);
+	}
+
+	return 0;
+}
+
+static const struct i2c_device_id wlf_gf_module_id[] = {
+	{ "wlf-gf-module", 0 },
+	{ }
+};
+
+static struct i2c_driver wlf_gf_module_driver = {
+	.driver = {
+		.name = "wlf-gf-module",
+		.owner = THIS_MODULE,
+	},
+	.probe = wlf_gf_module_probe,
+	.id_table = wlf_gf_module_id,
+};
+
+static int __init wlf_gf_module_register(void)
+{
+	return i2c_add_driver(&wlf_gf_module_driver);
+}
+module_init(wlf_gf_module_register);

arch/arm/mach-s3c64xx/mach-crag6410.c

@@ -43,13 +43,14 @@
 #include <mach/hardware.h>
 #include <mach/map.h>
 
-#include <mach/s3c6410.h>
 #include <mach/regs-sys.h>
 #include <mach/regs-gpio.h>
 #include <mach/regs-modem.h>
+#include <mach/crag6410.h>
 
 #include <mach/regs-gpio-memport.h>
 
+#include <plat/s3c6410.h>
 #include <plat/regs-serial.h>
 #include <plat/regs-fb-v4.h>
 #include <plat/fb.h>
@@ -65,17 +66,6 @@
 #include <plat/iic.h>
 #include <plat/pm.h>
 
-#include <sound/wm8996.h>
-#include <sound/wm8962.h>
-#include <sound/wm9081.h>
-
-#define BANFF_PMIC_IRQ_BASE		IRQ_BOARD_START
-#define GLENFARCLAS_PMIC_IRQ_BASE	(IRQ_BOARD_START + 64)
-
-#define PCA935X_GPIO_BASE		GPIO_BOARD_START
-#define CODEC_GPIO_BASE		(GPIO_BOARD_START + 8)
-#define GLENFARCLAS_PMIC_GPIO_BASE	(GPIO_BOARD_START + 16)
-
 /* serial port setup */
 
 #define UCON (S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK)
@@ -287,6 +277,11 @@ static struct platform_device speyside_device = {
 	.id		= -1,
 };
 
+static struct platform_device lowland_device = {
+	.name		= "lowland",
+	.id		= -1,
+};
+
 static struct platform_device speyside_wm8962_device = {
 	.name		= "speyside-wm8962",
 	.id		= -1,
@@ -295,6 +290,8 @@ static struct platform_device speyside_wm8962_device = {
 static struct regulator_consumer_supply wallvdd_consumers[] = {
 	REGULATOR_SUPPLY("SPKVDD1", "1-001a"),
 	REGULATOR_SUPPLY("SPKVDD2", "1-001a"),
+	REGULATOR_SUPPLY("SPKVDDL", "1-001a"),
+	REGULATOR_SUPPLY("SPKVDDR", "1-001a"),
 };
 
 static struct regulator_init_data wallvdd_data = {
@@ -329,9 +326,6 @@ static struct platform_device *crag6410_devices[] __initdata = {
 	&s3c_device_fb,
 	&s3c_device_ohci,
 	&s3c_device_usb_hsotg,
-	&s3c_device_adc,
-	&s3c_device_rtc,
-	&s3c_device_ts,
 	&s3c_device_timer[0],
 	&s3c64xx_device_iis0,
 	&s3c64xx_device_iis1,
@@ -345,6 +339,7 @@ static struct platform_device *crag6410_devices[] __initdata = {
 	&crag6410_backlight_device,
 	&speyside_device,
 	&speyside_wm8962_device,
+	&lowland_device,
 	&wallvdd_device,
 };
 
@@ -353,6 +348,12 @@ static struct pca953x_platform_data crag6410_pca_data = {
 	.irq_base	= 0,
 };
 
+/* VDDARM is controlled by DVS1 connected to GPK(0) */
+static struct wm831x_buckv_pdata vddarm_pdata = {
+	.dvs_control_src = 1,
+	.dvs_gpio = S3C64XX_GPK(0),
+};
+
 static struct regulator_consumer_supply vddarm_consumers[] __initdata = {
 	REGULATOR_SUPPLY("vddarm", NULL),
 };
@@ -368,6 +369,7 @@ static struct regulator_init_data vddarm __initdata = {
 	.num_consumer_supplies = ARRAY_SIZE(vddarm_consumers),
 	.consumer_supplies = vddarm_consumers,
 	.supply_regulator = "WALLVDD",
+	.driver_data = &vddarm_pdata,
 };
 
 static struct regulator_init_data vddint __initdata = {
@@ -503,6 +505,8 @@ static struct wm831x_pdata crag_pmic_pdata __initdata = {
 	.backup = &banff_backup_pdata,
 
 	.gpio_defaults = {
+		/* GPIO5: DVS1_REQ - CMOS, DBVDD, active high */
+		[4] = WM831X_GPN_DIR | WM831X_GPN_POL | WM831X_GPN_ENA | 0x8,
 		/* GPIO11: Touchscreen data - CMOS, DBVDD, active high*/
 		[10] = WM831X_GPN_POL | WM831X_GPN_ENA | 0x6,
 		/* GPIO12: Touchscreen pen down - CMOS, DBVDD, active high*/
@@ -560,8 +564,12 @@ static struct regulator_init_data pvdd_1v2 __initdata = {
 };
 
 static struct regulator_consumer_supply pvdd_1v8_consumers[] __initdata = {
+	REGULATOR_SUPPLY("LDOVDD", "1-001a"),
 	REGULATOR_SUPPLY("PLLVDD", "1-001a"),
 	REGULATOR_SUPPLY("DBVDD", "1-001a"),
+	REGULATOR_SUPPLY("DBVDD1", "1-001a"),
+	REGULATOR_SUPPLY("DBVDD2", "1-001a"),
+	REGULATOR_SUPPLY("DBVDD3", "1-001a"),
 	REGULATOR_SUPPLY("CPVDD", "1-001a"),
 	REGULATOR_SUPPLY("AVDD2", "1-001a"),
 	REGULATOR_SUPPLY("DCVDD", "1-001a"),
@@ -614,81 +622,16 @@ static struct wm831x_pdata glenfarclas_pmic_pdata __initdata = {
 	.disable_touch = true,
 };
 
-static struct wm8996_retune_mobile_config wm8996_retune[] = {
-	{
-		.name = "Sub LPF",
-		.rate = 48000,
-		.regs = {
-			0x6318, 0x6300, 0x1000, 0x0000, 0x0004, 0x2000, 0xF000,
-			0x0000, 0x0004, 0x2000, 0xF000, 0x0000, 0x0004, 0x2000,
-			0xF000, 0x0000, 0x0004, 0x1000, 0x0800, 0x4000
-		},
-	},
-	{
-		.name = "Sub HPF",
-		.rate = 48000,
-		.regs = {
-			0x000A, 0x6300, 0x1000, 0x0000, 0x0004, 0x2000, 0xF000,
-			0x0000, 0x0004, 0x2000, 0xF000, 0x0000, 0x0004, 0x2000,
-			0xF000, 0x0000, 0x0004, 0x1000, 0x0800, 0x4000
-		},
-	},
-};
-
-static struct wm8996_pdata wm8996_pdata __initdata = {
-	.ldo_ena = S3C64XX_GPN(7),
-	.gpio_base = CODEC_GPIO_BASE,
-	.micdet_def = 1,
-	.inl_mode = WM8996_DIFFERRENTIAL_1,
-	.inr_mode = WM8996_DIFFERRENTIAL_1,
-
-	.irq_flags = IRQF_TRIGGER_RISING,
-
-	.gpio_default = {
-		0x8001, /* GPIO1 == ADCLRCLK1 */
-		0x8001, /* GPIO2 == ADCLRCLK2, input due to CPU */
-		0x0141, /* GPIO3 == HP_SEL */
-		0x0002, /* GPIO4 == IRQ */
-		0x020e, /* GPIO5 == CLKOUT */
-	},
-
-	.retune_mobile_cfgs = wm8996_retune,
-	.num_retune_mobile_cfgs = ARRAY_SIZE(wm8996_retune),
-};
-
-static struct wm8962_pdata wm8962_pdata __initdata = {
-	.gpio_init = {
-		0,
-		WM8962_GPIO_FN_OPCLK,
-		WM8962_GPIO_FN_DMICCLK,
-		0,
-		0x8000 | WM8962_GPIO_FN_DMICDAT,
-		WM8962_GPIO_FN_IRQ,    /* Open drain mode */
-	},
-	.irq_active_low = true,
-};
-
-static struct wm9081_pdata wm9081_pdata __initdata = {
-	.irq_high = false,
-	.irq_cmos = false,
-};
-
 static struct i2c_board_info i2c_devs1[] __initdata = {
 	{ I2C_BOARD_INFO("wm8311", 0x34),
 	  .irq = S3C_EINT(0),
 	  .platform_data = &glenfarclas_pmic_pdata },
 
+	{ I2C_BOARD_INFO("wlf-gf-module", 0x24) },
+	{ I2C_BOARD_INFO("wlf-gf-module", 0x25) },
+	{ I2C_BOARD_INFO("wlf-gf-module", 0x26) },
+
 	{ I2C_BOARD_INFO("wm1250-ev1", 0x27) },
-	{ I2C_BOARD_INFO("wm8996", 0x1a),
-	  .platform_data = &wm8996_pdata,
-	  .irq = GLENFARCLAS_PMIC_IRQ_BASE + WM831X_IRQ_GPIO_2,
-	},
-	{ I2C_BOARD_INFO("wm9081", 0x6c),
-	  .platform_data = &wm9081_pdata, },
-	{ I2C_BOARD_INFO("wm8962", 0x1a),
-	  .platform_data = &wm8962_pdata,
-	  .irq = GLENFARCLAS_PMIC_IRQ_BASE + WM831X_IRQ_GPIO_2,
-	},
 };
 
 static void __init crag6410_map_io(void)

arch/arm/mach-s3c64xx/mach-hmt.c

@@ -37,7 +37,7 @@
 #include <plat/fb.h>
 #include <plat/nand.h>
 
-#include <mach/s3c6410.h>
+#include <plat/s3c6410.h>
 #include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>

arch/arm/mach-s3c64xx/mach-mini6410.c

@@ -32,8 +32,8 @@
 #include <mach/regs-gpio.h>
 #include <mach/regs-modem.h>
 #include <mach/regs-srom.h>
-#include <mach/s3c6410.h>
 
+#include <plat/s3c6410.h>
 #include <plat/adc.h>
 #include <plat/cpu.h>
 #include <plat/devs.h>
@@ -205,12 +205,6 @@ static struct platform_device mini6410_lcd_powerdev = {
 	.dev.platform_data	= &mini6410_lcd_power_data,
 };
 
-static struct s3c2410_ts_mach_info s3c_ts_platform __initdata = {
-	.delay			= 10000,
-	.presc			= 49,
-	.oversampling_shift	= 2,
-};
-
 static struct platform_device *mini6410_devices[] __initdata = {
 	&mini6410_device_eth,
 	&s3c_device_hsmmc0,
@@ -319,7 +313,7 @@ static void __init mini6410_machine_init(void)
 
 	s3c_nand_set_platdata(&mini6410_nand_info);
 	s3c_fb_set_platdata(&mini6410_lcd_pdata);
-	s3c24xx_ts_set_platdata(&s3c_ts_platform);
+	s3c24xx_ts_set_platdata(NULL);
 
 	/* configure nCS1 width to 16 bits */
 

arch/arm/mach-s3c64xx/mach-ncp.c

@@ -39,7 +39,7 @@
 #include <plat/iic.h>
 #include <plat/fb.h>
 
-#include <mach/s3c6410.h>
+#include <plat/s3c6410.h>
 #include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>