Merge tag 'ux500-core-for-arm-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into next/soc

From Linus Walleij:
Core ux500 changes for v3.12:
- Add support for restart using the PRCMU
- Move secondary startup out of INIT section
- set coherent_dma_mask for DMA40

* tag 'ux500-core-for-arm-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson:
  ARM: ux500: set coherent_dma_mask for dma40
  ARM: ux500: remove u8500_secondary_startup from INIT section.
  ARM: ux500: add restart support via prcmu

arch/arm/mach-ux500/board-mop500.c

@@ -42,7 +42,6 @@
 #include <linux/platform_data/dma-ste-dma40.h>
 
 #include <asm/mach-types.h>
-#include <asm/mach/arch.h>
 
 #include "setup.h"
 #include "devices.h"
@@ -686,6 +685,7 @@ MACHINE_START(U8500, "ST-Ericsson MOP500 platform")
 	.init_time	= ux500_timer_init,
 	.init_machine	= mop500_init_machine,
 	.init_late	= ux500_init_late,
+	.restart        = ux500_restart,
 MACHINE_END
 
 MACHINE_START(U8520, "ST-Ericsson U8520 Platform HREFP520")
@@ -695,6 +695,7 @@ MACHINE_START(U8520, "ST-Ericsson U8520 Platform HREFP520")
 	.init_time	= ux500_timer_init,
 	.init_machine	= mop500_init_machine,
 	.init_late	= ux500_init_late,
+	.restart        = ux500_restart,
 MACHINE_END
 
 MACHINE_START(HREFV60, "ST-Ericsson U8500 Platform HREFv60+")
@@ -705,6 +706,7 @@ MACHINE_START(HREFV60, "ST-Ericsson U8500 Platform HREFv60+")
 	.init_time	= ux500_timer_init,
 	.init_machine	= hrefv60_init_machine,
 	.init_late	= ux500_init_late,
+	.restart        = ux500_restart,
 MACHINE_END
 
 MACHINE_START(SNOWBALL, "Calao Systems Snowball platform")
@@ -716,4 +718,5 @@ MACHINE_START(SNOWBALL, "Calao Systems Snowball platform")
 	.init_time	= ux500_timer_init,
 	.init_machine	= snowball_init_machine,
 	.init_late	= NULL,
+	.restart        = ux500_restart,
 MACHINE_END

arch/arm/mach-ux500/cpu-db8500.c

@@ -26,7 +26,6 @@
 
 #include <asm/pmu.h>
 #include <asm/mach/map.h>
-#include <asm/mach/arch.h>
 
 #include "setup.h"
 #include "devices.h"
@@ -325,6 +324,7 @@ DT_MACHINE_START(U8500_DT, "ST-Ericsson Ux5x0 platform (Device Tree Support)")
 	.init_machine	= u8500_init_machine,
 	.init_late	= NULL,
 	.dt_compat      = stericsson_dt_platform_compat,
+	.restart        = ux500_restart,
 MACHINE_END
 
 #endif

arch/arm/mach-ux500/cpu.c

@@ -31,6 +31,14 @@
 #include "db8500-regs.h"
 #include "id.h"
 
+void ux500_restart(enum reboot_mode mode, const char *cmd)
+{
+	local_irq_disable();
+	local_fiq_disable();
+
+	prcmu_system_reset(0);
+}
+
 /*
  * FIXME: Should we set up the GPIO domain here?
  *

arch/arm/mach-ux500/devices-db8500.c

@@ -49,6 +49,7 @@ struct stedma40_platform_data dma40_plat_data = {
 struct platform_device u8500_dma40_device = {
 	.dev = {
 		.platform_data = &dma40_plat_data,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
 	},
 	.name = "dma40",
 	.id = 0,

arch/arm/mach-ux500/headsmp.S

@@ -11,8 +11,6 @@
 #include <linux/linkage.h>
 #include <linux/init.h>
 
-	__INIT
-
 /*
  * U8500 specific entry point for secondary CPUs.
  */

arch/arm/mach-ux500/setup.h

@@ -11,10 +11,13 @@
 #ifndef __ASM_ARCH_SETUP_H
 #define __ASM_ARCH_SETUP_H
 
+#include <asm/mach/arch.h>
 #include <asm/mach/time.h>
 #include <linux/init.h>
 #include <linux/mfd/abx500/ab8500.h>
 
+void ux500_restart(enum reboot_mode mode, const char *cmd);
+
 void __init ux500_map_io(void);
 extern void __init u8500_map_io(void);