Merge tag 'imx-fixes-rc' of git://git.pengutronix.de/git/imx/linux-2.6 into fixes

From Sascha Hauer:

ARM i.MX fixes for v3.8-rc

This fixes a compile failure on imx_v4_v5_defconfig and a regression
introduced with enabling the MIPI clocks on i.MX51. Also one rather
cosmetic fix for the i.MX27 dts file.

* tag 'imx-fixes-rc' of git://git.pengutronix.de/git/imx/linux-2.6:
  ARM: imx: Move platform-mx2-emma to arch/arm/mach-imx/devices
  ARM i.MX51 clock: Fix regression since enabling MIPI/HSP clocks
  ARM: dts: mx27: Fix the AIPI bus for FEC

arch/arm/boot/dts/imx27-3ds.dts

@@ -21,17 +21,17 @@
 	};
 
 	soc {
-		aipi@10000000 { /* aipi */
-
+		aipi@10000000 { /* aipi1 */
 			uart1: serial@1000a000 {
 				fsl,uart-has-rtscts;
 				status = "okay";
 			};
+		};
 
-			fec@1002b000 {
+		aipi@10020000 { /* aipi2 */
+			ethernet@1002b000 {
 				status = "okay";
 			};
 		};
 	};
-
 };

arch/arm/boot/dts/imx27-phytec-phycore.dts

@@ -21,8 +21,7 @@
 	};
 
 	soc {
-		aipi@10000000 { /* aipi */
-
+		aipi@10000000 { /* aipi1 */
 			serial@1000a000 {
 				fsl,uart-has-rtscts;
 				status = "okay";
@@ -38,10 +37,6 @@
 				status = "okay";
 			};
 
-			ethernet@1002b000 {
-				status = "okay";
-			};
-
 			i2c@1001d000 {
 				clock-frequency = <400000>;
 				status = "okay";
@@ -60,6 +55,12 @@
 				};
 			};
 		};
+
+		aipi@10020000 { /* aipi2 */
+			ethernet@1002b000 {
+				status = "okay";
+			};
+		};
 	};
 
 	nor_flash@c0000000 {

arch/arm/boot/dts/imx27.dtsi

@@ -55,7 +55,7 @@
 			compatible = "fsl,aipi-bus", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
-			reg = <0x10000000 0x10000000>;
+			reg = <0x10000000 0x20000>;
 			ranges;
 
 			wdog: wdog@10002000 {
@@ -211,6 +211,15 @@
 				status = "disabled";
 			};
 
+		};
+
+		aipi@10020000 { /* AIPI2 */
+			compatible = "fsl,aipi-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x10020000 0x20000>;
+			ranges;
+
 			fec: ethernet@1002b000 {
 				compatible = "fsl,imx27-fec";
 				reg = <0x1002b000 0x4000>;

arch/arm/mach-imx/clk-imx51-imx53.c

@@ -319,6 +319,7 @@ int __init mx51_clocks_init(unsigned long rate_ckil, unsigned long rate_osc,
 			unsigned long rate_ckih1, unsigned long rate_ckih2)
 {
 	int i;
+	u32 val;
 	struct device_node *np;
 
 	clk[pll1_sw] = imx_clk_pllv2("pll1_sw", "osc", MX51_DPLL1_BASE);
@@ -390,6 +391,21 @@ int __init mx51_clocks_init(unsigned long rate_ckil, unsigned long rate_osc,
 	imx_print_silicon_rev("i.MX51", mx51_revision());
 	clk_disable_unprepare(clk[iim_gate]);
 
+	/*
+	 * Reference Manual says: Functionality of CCDR[18] and CLPCR[23] is no
+	 * longer supported. Set to one for better power saving.
+	 *
+	 * The effect of not setting these bits is that MIPI clocks can't be
+	 * enabled without the IPU clock being enabled aswell.
+	 */
+	val = readl(MXC_CCM_CCDR);
+	val |= 1 << 18;
+	writel(val, MXC_CCM_CCDR);
+
+	val = readl(MXC_CCM_CLPCR);
+	val |= 1 << 23;
+	writel(val, MXC_CCM_CLPCR);
+
 	return 0;
 }
 

arch/arm/plat-mxc/devices/platform-mx2-emma.c → arch/arm/mach-imx/devices/platform-mx2-emma.c

@@ -6,8 +6,8 @@
  * the terms of the GNU General Public License version 2 as published by the
  * Free Software Foundation.
  */
-#include <mach/hardware.h>
-#include <mach/devices-common.h>
+#include "../hardware.h"
+#include "devices-common.h"
 
 #define imx_mx2_emmaprp_data_entry_single(soc)				\
 	{								\