Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 into sh-latest

.gitignore

@@ -28,6 +28,7 @@ modules.builtin
 *.gz
 *.bz2
 *.lzma
+*.xz
 *.lzo
 *.patch
 *.gcno

Documentation/00-INDEX

@@ -328,8 +328,6 @@ sysrq.txt
 	- info on the magic SysRq key.
 telephony/
 	- directory with info on telephony (e.g. voice over IP) support.
-time_interpolators.txt
-	- info on time interpolators.
 uml/
 	- directory with information about User Mode Linux.
 unicode.txt
@@ -346,8 +344,6 @@ vm/
 	- directory with info on the Linux vm code.
 volatile-considered-harmful.txt
 	- Why the "volatile" type class should not be used
-voyager.txt
-	- guide to running Linux on the Voyager architecture.
 w1/
 	- directory with documents regarding the 1-wire (w1) subsystem.
 watchdog/

Documentation/ABI/stable/sysfs-firmware-efi-vars

@@ -0,0 +1,75 @@
+What:		/sys/firmware/efi/vars
+Date:		April 2004
+Contact:	Matt Domsch <Matt_Domsch@dell.com>
+Description:
+		This directory exposes interfaces for interactive with
+		EFI variables.  For more information on EFI variables,
+		see 'Variable Services' in the UEFI specification
+		(section 7.2 in specification version 2.3 Errata D).
+
+		In summary, EFI variables are named, and are classified
+		into separate namespaces through the use of a vendor
+		GUID.  They also have an arbitrary binary value
+		associated with them.
+
+		The efivars module enumerates these variables and
+		creates a separate directory for each one found.  Each
+		directory has a name of the form "<key>-<vendor guid>"
+		and contains the following files:
+
+		attributes:	A read-only text file enumerating the
+				EFI variable flags.  Potential values
+				include:
+
+				EFI_VARIABLE_NON_VOLATILE
+				EFI_VARIABLE_BOOTSERVICE_ACCESS
+				EFI_VARIABLE_RUNTIME_ACCESS
+				EFI_VARIABLE_HARDWARE_ERROR_RECORD
+				EFI_VARIABLE_AUTHENTICATED_WRITE_ACCESS
+
+				See the EFI documentation for an
+				explanation of each of these variables.
+
+		data:		A read-only binary file that can be read
+				to attain the value of the EFI variable
+
+		guid:		The vendor GUID of the variable.  This
+				should always match the GUID in the
+				variable's name.
+
+		raw_var:	A binary file that can be read to obtain
+				a structure that contains everything
+				there is to know about the variable.
+				For structure definition see "struct
+				efi_variable" in the kernel sources.
+
+				This file can also be written to in
+				order to update the value of a variable.
+				For this to work however, all fields of
+				the "struct efi_variable" passed must
+				match byte for byte with the structure
+				read out of the file, save for the value
+				portion.
+
+				**Note** the efi_variable structure
+				read/written with this file contains a
+				'long' type that may change widths
+				depending on your underlying
+				architecture.
+
+		size:		As ASCII representation of the size of
+				the variable's value.
+
+
+		In addition, two other magic binary files are provided
+		in the top-level directory and are used for adding and
+		removing variables:
+
+		new_var:	Takes a "struct efi_variable" and
+				instructs the EFI firmware to create a
+				new variable.
+
+		del_var:	Takes a "struct efi_variable" and
+				instructs the EFI firmware to remove any
+				variable that has a matching vendor GUID
+				and variable key name.

Documentation/ABI/testing/pstore

@@ -0,0 +1,35 @@
+Where:		/dev/pstore/...
+Date:		January 2011
+Kernel Version: 2.6.38
+Contact:	tony.luck@intel.com
+Description:	Generic interface to platform dependent persistent storage.
+
+		Platforms that provide a mechanism to preserve some data
+		across system reboots can register with this driver to
+		provide a generic interface to show records captured in
+		the dying moments.  In the case of a panic the last part
+		of the console log is captured, but other interesting
+		data can also be saved.
+
+		# mount -t pstore - /dev/pstore
+
+		$ ls -l /dev/pstore
+		total 0
+		-r--r--r-- 1 root root 7896 Nov 30 15:38 dmesg-erst-1
+
+		Different users of this interface will result in different
+		filename prefixes.  Currently two are defined:
+
+		"dmesg"	- saved console log
+		"mce"	- architecture dependent data from fatal h/w error
+
+		Once the information in a file has been read, removing
+		the file will signal to the underlying persistent storage
+		device that it can reclaim the space for later re-use.
+
+		$ rm /dev/pstore/dmesg-erst-1
+
+		The expectation is that all files in /dev/pstore
+		will be saved elsewhere and erased from persistent store
+		soon after boot to free up space ready for the next
+		catastrophe.

Documentation/ABI/testing/sysfs-devices-power

@@ -29,9 +29,8 @@ Description:
 		"disabled" to it.
 
 		For the devices that are not capable of generating system wakeup
-		events this file contains "\n".  In that cases the user space
-		cannot modify the contents of this file and the device cannot be
-		enabled to wake up the system.
+		events this file is not present.  In that case the device cannot
+		be enabled to wake up the system from sleep states.
 
 What:		/sys/devices/.../power/control
 Date:		January 2009
@@ -85,7 +84,7 @@ Description:
 		The /sys/devices/.../wakeup_count attribute contains the number
 		of signaled wakeup events associated with the device.  This
 		attribute is read-only.  If the device is not enabled to wake up
-		the system from sleep states, this attribute is empty.
+		the system from sleep states, this attribute is not present.
 
 What:		/sys/devices/.../power/wakeup_active_count
 Date:		September 2010
@@ -95,7 +94,7 @@ Description:
 		number of times the processing of wakeup events associated with
 		the device was completed (at the kernel level).  This attribute
 		is read-only.  If the device is not enabled to wake up the
-		system from sleep states, this attribute is empty.
+		system from sleep states, this attribute is not present.
 
 What:		/sys/devices/.../power/wakeup_hit_count
 Date:		September 2010
@@ -105,7 +104,8 @@ Description:
 		number of times the processing of a wakeup event associated with
 		the device might prevent the system from entering a sleep state.
 		This attribute is read-only.  If the device is not enabled to
-		wake up the system from sleep states, this attribute is empty.
+		wake up the system from sleep states, this attribute is not
+		present.
 
 What:		/sys/devices/.../power/wakeup_active
 Date:		September 2010
@@ -115,7 +115,7 @@ Description:
 		or 0, depending on whether or not a wakeup event associated with
 		the device is being processed (1).  This attribute is read-only.
 		If the device is not enabled to wake up the system from sleep
-		states, this attribute is empty.
+		states, this attribute is not present.
 
 What:		/sys/devices/.../power/wakeup_total_time_ms
 Date:		September 2010
@@ -125,7 +125,7 @@ Description:
 		the total time of processing wakeup events associated with the
 		device, in milliseconds.  This attribute is read-only.  If the
 		device is not enabled to wake up the system from sleep states,
-		this attribute is empty.
+		this attribute is not present.
 
 What:		/sys/devices/.../power/wakeup_max_time_ms
 Date:		September 2010
@@ -135,7 +135,7 @@ Description:
 		the maximum time of processing a single wakeup event associated
 		with the device, in milliseconds.  This attribute is read-only.
 		If the device is not enabled to wake up the system from sleep
-		states, this attribute is empty.
+		states, this attribute is not present.
 
 What:		/sys/devices/.../power/wakeup_last_time_ms
 Date:		September 2010
@@ -146,7 +146,7 @@ Description:
 		signaling the last wakeup event associated with the device, in
 		milliseconds.  This attribute is read-only.  If the device is
 		not enabled to wake up the system from sleep states, this
-		attribute is empty.
+		attribute is not present.
 
 What:		/sys/devices/.../power/autosuspend_delay_ms
 Date:		September 2010

Documentation/ABI/testing/sysfs-firmware-dmi

@@ -0,0 +1,110 @@
+What:		/sys/firmware/dmi/
+Date:		February 2011
+Contact:	Mike Waychison <mikew@google.com>
+Description:
+		Many machines' firmware (x86 and ia64) export DMI /
+		SMBIOS tables to the operating system.  Getting at this
+		information is often valuable to userland, especially in
+		cases where there are OEM extensions used.
+
+		The kernel itself does not rely on the majority of the
+		information in these tables being correct.  It equally
+		cannot ensure that the data as exported to userland is
+		without error either.
+
+		DMI is structured as a large table of entries, where
+		each entry has a common header indicating the type and
+		length of the entry, as well as 'handle' that is
+		supposed to be unique amongst all entries.
+
+		Some entries are required by the specification, but many
+		others are optional.  In general though, users should
+		never expect to find a specific entry type on their
+		system unless they know for certain what their firmware
+		is doing.  Machine to machine will vary.
+
+		Multiple entries of the same type are allowed.  In order
+		to handle these duplicate entry types, each entry is
+		assigned by the operating system an 'instance', which is
+		derived from an entry type's ordinal position.  That is
+		to say, if there are 'N' multiple entries with the same type
+		'T' in the DMI tables (adjacent or spread apart, it
+		doesn't matter), they will be represented in sysfs as
+		entries "T-0" through "T-(N-1)":
+
+		Example entry directories:
+
+			/sys/firmware/dmi/entries/17-0
+			/sys/firmware/dmi/entries/17-1
+			/sys/firmware/dmi/entries/17-2
+			/sys/firmware/dmi/entries/17-3
+			...
+
+		Instance numbers are used in lieu of the firmware
+		assigned entry handles as the kernel itself makes no
+		guarantees that handles as exported are unique, and
+		there are likely firmware images that get this wrong in
+		the wild.
+
+		Each DMI entry in sysfs has the common header values
+		exported as attributes:
+
+		handle	: The 16bit 'handle' that is assigned to this
+			  entry by the firmware.  This handle may be
+			  referred to by other entries.
+		length	: The length of the entry, as presented in the
+			  entry itself.  Note that this is _not the
+			  total count of bytes associated with the
+			  entry_.  This value represents the length of
+			  the "formatted" portion of the entry.  This
+			  "formatted" region is sometimes followed by
+			  the "unformatted" region composed of nul
+			  terminated strings, with termination signalled
+			  by a two nul characters in series.
+		raw	: The raw bytes of the entry. This includes the
+			  "formatted" portion of the entry, the
+			  "unformatted" strings portion of the entry,
+			  and the two terminating nul characters.
+		type	: The type of the entry.  This value is the same
+			  as found in the directory name.  It indicates
+			  how the rest of the entry should be
+			  interpreted.
+		instance: The instance ordinal of the entry for the
+			  given type.  This value is the same as found
+			  in the parent directory name.
+		position: The position of the entry within the entirety
+			  of the entirety.
+
+		=== Entry Specialization ===
+
+		Some entry types may have other information available in
+		sysfs.
+
+		--- Type 15 - System Event Log ---
+
+		This entry allows the firmware to export a log of
+		events the system has taken.  This information is
+		typically backed by nvram, but the implementation
+		details are abstracted by this table.  This entries data
+		is exported in the directory:
+
+		/sys/firmware/dmi/entries/15-0/system_event_log
+
+		and has the following attributes (documented in the
+		SMBIOS / DMI specification under "System Event Log (Type 15)":
+
+		area_length
+		header_start_offset
+		data_start_offset
+		access_method
+		status
+		change_token
+		access_method_address
+		header_format
+		per_log_type_descriptor_length
+		type_descriptors_supported_count
+
+		As well, the kernel exports the binary attribute:
+
+		raw_event_log	: The raw binary bits of the event log
+				  as described by the DMI entry.

Documentation/ABI/testing/sysfs-fs-pstore

@@ -0,0 +1,7 @@
+What:		/sys/fs/pstore/kmsg_bytes
+Date:		January 2011
+Kernel Version: 2.6.38
+Contact:	"Tony Luck" <tony.luck@intel.com>
+Description:
+		Controls amount of console log that will be saved
+		to persistent store on oops/panic.

Documentation/ABI/testing/sysfs-platform-kim

@@ -0,0 +1,48 @@
+What:		/sys/devices/platform/kim/dev_name
+Date:		January 2010
+KernelVersion:	2.6.38
+Contact:	"Pavan Savoy" <pavan_savoy@ti.com>
+Description:
+		Name of the UART device at which the WL128x chip
+		is connected. example: "/dev/ttyS0".
+		The device name flows down to architecture specific board
+		initialization file from the SFI/ATAGS bootloader
+		firmware. The name exposed is read from the user-space
+		dameon and opens the device when install is requested.
+
+What:		/sys/devices/platform/kim/baud_rate
+Date:		January 2010
+KernelVersion:	2.6.38
+Contact:	"Pavan Savoy" <pavan_savoy@ti.com>
+Description:
+		The maximum reliable baud-rate the host can support.
+		Different platforms tend to have different high-speed
+		UART configurations, so the baud-rate needs to be set
+		locally and also sent across to the WL128x via a HCI-VS
+		command. The entry is read and made use by the user-space
+		daemon when the ldisc install is requested.
+
+What:		/sys/devices/platform/kim/flow_cntrl
+Date:		January 2010
+KernelVersion:	2.6.38
+Contact:	"Pavan Savoy" <pavan_savoy@ti.com>
+Description:
+		The WL128x makes use of flow control mechanism, and this
+		entry most often should be 1, the host's UART is required
+		to have the capability of flow-control, or else this
+		entry can be made use of for exceptions.
+
+What:		/sys/devices/platform/kim/install
+Date:		January 2010
+KernelVersion:	2.6.38
+Contact:	"Pavan Savoy" <pavan_savoy@ti.com>
+Description:
+		When one of the protocols Bluetooth, FM or GPS wants to make
+		use of the shared UART transport, it registers to the shared
+		transport driver, which will signal the user-space for opening,
+		configuring baud and install line discipline via this sysfs
+		entry. This entry would be polled upon by the user-space
+		daemon managing the UART, and is notified about the change
+		by the sysfs_notify. The value would be '1' when UART needs
+		to be opened/ldisc installed, and would be '0' when UART
+		is no more required and needs to be closed.

Documentation/CodingStyle

@@ -659,7 +659,7 @@ There are a number of driver model diagnostic macros in <linux/device.h>
 which you should use to make sure messages are matched to the right device
 and driver, and are tagged with the right level:  dev_err(), dev_warn(),
 dev_info(), and so forth.  For messages that aren't associated with a
-particular device, <linux/kernel.h> defines pr_debug() and pr_info().
+particular device, <linux/printk.h> defines pr_debug() and pr_info().
 
 Coming up with good debugging messages can be quite a challenge; and once
 you have them, they can be a huge help for remote troubleshooting.  Such
@@ -819,6 +819,3 @@ language C, URL: http://www.open-std.org/JTC1/SC22/WG14/
 Kernel CodingStyle, by greg@kroah.com at OLS 2002:
 http://www.kroah.com/linux/talks/ols_2002_kernel_codingstyle_talk/html/
 
---
-Last updated on 2007-July-13.
-

Documentation/DocBook/drm.tmpl

@@ -73,8 +73,8 @@
       services.
     </para>
     <para>
-      The core of every DRM driver is struct drm_device.  Drivers
-      will typically statically initialize a drm_device structure,
+      The core of every DRM driver is struct drm_driver.  Drivers
+      will typically statically initialize a drm_driver structure,
       then pass it to drm_init() at load time.
     </para>
 
@@ -84,7 +84,7 @@
     <title>Driver initialization</title>
     <para>
       Before calling the DRM initialization routines, the driver must
-      first create and fill out a struct drm_device structure.
+      first create and fill out a struct drm_driver structure.
     </para>
     <programlisting>
       static struct drm_driver driver = {

Documentation/DocBook/filesystems.tmpl

@@ -82,6 +82,11 @@
      </sect1>
   </chapter>
 
+  <chapter id="fs_events">
+     <title>Events based on file descriptors</title>
+!Efs/eventfd.c
+  </chapter>
+
   <chapter id="sysfs">
      <title>The Filesystem for Exporting Kernel Objects</title>
 !Efs/sysfs/file.c

Documentation/RCU/whatisRCU.txt

@@ -849,6 +849,37 @@ All:  lockdep-checked RCU-protected pointer access
 See the comment headers in the source code (or the docbook generated
 from them) for more information.
 
+However, given that there are no fewer than four families of RCU APIs
+in the Linux kernel, how do you choose which one to use?  The following
+list can be helpful:
+
+a.	Will readers need to block?  If so, you need SRCU.
+
+b.	What about the -rt patchset?  If readers would need to block
+	in an non-rt kernel, you need SRCU.  If readers would block
+	in a -rt kernel, but not in a non-rt kernel, SRCU is not
+	necessary.
+
+c.	Do you need to treat NMI handlers, hardirq handlers,
+	and code segments with preemption disabled (whether
+	via preempt_disable(), local_irq_save(), local_bh_disable(),
+	or some other mechanism) as if they were explicit RCU readers?
+	If so, you need RCU-sched.
+
+d.	Do you need RCU grace periods to complete even in the face
+	of softirq monopolization of one or more of the CPUs?  For
+	example, is your code subject to network-based denial-of-service
+	attacks?  If so, you need RCU-bh.
+
+e.	Is your workload too update-intensive for normal use of
+	RCU, but inappropriate for other synchronization mechanisms?
+	If so, consider SLAB_DESTROY_BY_RCU.  But please be careful!
+
+f.	Otherwise, use RCU.
+
+Of course, this all assumes that you have determined that RCU is in fact
+the right tool for your job.
+
 
 8.  ANSWERS TO QUICK QUIZZES
 

Documentation/arm/Booting

@@ -65,19 +65,13 @@ looks at the connected hardware is beyond the scope of this document.
 The boot loader must ultimately be able to provide a MACH_TYPE_xxx
 value to the kernel. (see linux/arch/arm/tools/mach-types).
 
-4. Setup boot data
-------------------
+
+4. Setup the kernel tagged list
+-------------------------------
 
 Existing boot loaders:		OPTIONAL, HIGHLY RECOMMENDED
 New boot loaders:		MANDATORY
 
-The boot loader must provide either a tagged list or a dtb image for
-passing configuration data to the kernel.  The physical address of the
-boot data is passed to the kernel in register r2.
-
-4a. Setup the kernel tagged list
---------------------------------
-
 The boot loader must create and initialise the kernel tagged list.
 A valid tagged list starts with ATAG_CORE and ends with ATAG_NONE.
 The ATAG_CORE tag may or may not be empty.  An empty ATAG_CORE tag
@@ -107,24 +101,6 @@ The tagged list must be placed in a region of memory where neither
 the kernel decompressor nor initrd 'bootp' program will overwrite
 it.  The recommended placement is in the first 16KiB of RAM.
 
-4b. Setup the device tree
--------------------------
-
-The boot loader must load a device tree image (dtb) into system ram
-at a 64bit aligned address and initialize it with the boot data.  The
-dtb format is documented in Documentation/devicetree/booting-without-of.txt.
-The kernel will look for the dtb magic value of 0xd00dfeed at the dtb
-physical address to determine if a dtb has been passed instead of a
-tagged list.
-
-The boot loader must pass at a minimum the size and location of the
-system memory, and the root filesystem location.  The dtb must be
-placed in a region of memory where the kernel decompressor will not
-overwrite it.  The recommended placement is in the first 16KiB of RAM
-with the caveat that it may not be located at physical address 0 since
-the kernel interprets a value of 0 in r2 to mean neither a tagged list
-nor a dtb were passed.
-
 5. Calling the kernel image
 ---------------------------
 
@@ -149,8 +125,7 @@ In either case, the following conditions must be met:
 - CPU register settings
   r0 = 0,
   r1 = machine type number discovered in (3) above.
-  r2 = physical address of tagged list in system RAM, or
-       physical address of device tree block (dtb) in system RAM
+  r2 = physical address of tagged list in system RAM.
 
 - CPU mode
   All forms of interrupts must be disabled (IRQs and FIQs)

Documentation/arm/SH-Mobile/Makefile

@@ -0,0 +1,8 @@
+BIN := vrl4
+
+.PHONY: all
+all: $(BIN)
+
+.PHONY: clean
+clean:
+	rm -f *.o $(BIN)

Documentation/arm/SH-Mobile/vrl4.c

@@ -0,0 +1,169 @@
+/*
+ * vrl4 format generator
+ *
+ * Copyright (C) 2010 Simon Horman
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+/*
+ * usage: vrl4 < zImage > out
+ *	  dd if=out of=/dev/sdx bs=512 seek=1 # Write the image to sector 1
+ *
+ * Reads a zImage from stdin and writes a vrl4 image to stdout.
+ * In practice this means writing a padded vrl4 header to stdout followed
+ * by the zImage.
+ *
+ * The padding places the zImage at ALIGN bytes into the output.
+ * The vrl4 uses ALIGN + START_BASE as the start_address.
+ * This is where the mask ROM will jump to after verifying the header.
+ *
+ * The header sets copy_size to min(sizeof(zImage), MAX_BOOT_PROG_LEN) + ALIGN.
+ * That is, the mask ROM will load the padded header (ALIGN bytes)
+ * And then MAX_BOOT_PROG_LEN bytes of the image, or the entire image,
+ * whichever is smaller.
+ *
+ * The zImage is not modified in any way.
+ */
+
+#define _BSD_SOURCE
+#include <endian.h>
+#include <unistd.h>
+#include <stdint.h>
+#include <stdio.h>
+#include <errno.h>
+
+struct hdr {
+	uint32_t magic1;
+	uint32_t reserved1;
+	uint32_t magic2;
+	uint32_t reserved2;
+	uint16_t copy_size;
+	uint16_t boot_options;
+	uint32_t reserved3;
+	uint32_t start_address;
+	uint32_t reserved4;
+	uint32_t reserved5;
+	char     reserved6[308];
+};
+
+#define DECLARE_HDR(h)					\
+	struct hdr (h) = {				\
+		.magic1 =	htole32(0xea000000),	\
+		.reserved1 =	htole32(0x56),		\
+		.magic2 =	htole32(0xe59ff008),	\
+		.reserved3 =	htole16(0x1) }
+
+/* Align to 512 bytes, the MMCIF sector size */
+#define ALIGN_BITS	9
+#define ALIGN		(1 << ALIGN_BITS)
+
+#define START_BASE	0xe55b0000
+
+/*
+ * With an alignment of 512 the header uses the first sector.
+ * There is a 128 sector (64kbyte) limit on the data loaded by the mask ROM.
+ * So there are 127 sectors left for the boot programme. But in practice
+ * Only a small portion of a zImage is needed, 16 sectors should be more
+ * than enough.
+ *
+ * Note that this sets how much of the zImage is copied by the mask ROM.
+ * The entire zImage is present after the header and is loaded
+ * by the code in the boot program (which is the first portion of the zImage).
+ */
+#define	MAX_BOOT_PROG_LEN (16 * 512)
+
+#define ROUND_UP(x)	((x + ALIGN - 1) & ~(ALIGN - 1))
+
+ssize_t do_read(int fd, void *buf, size_t count)
+{
+	size_t offset = 0;
+	ssize_t l;
+
+	while (offset < count) {
+		l = read(fd, buf + offset, count - offset);
+		if (!l)
+			break;
+		if (l < 0) {
+			if (errno == EAGAIN || errno == EWOULDBLOCK)
+				continue;
+			perror("read");
+			return -1;
+		}
+		offset += l;
+	}
+
+	return offset;
+}
+
+ssize_t do_write(int fd, const void *buf, size_t count)
+{
+	size_t offset = 0;
+	ssize_t l;
+
+	while (offset < count) {
+		l = write(fd, buf + offset, count - offset);
+		if (l < 0) {
+			if (errno == EAGAIN || errno == EWOULDBLOCK)
+				continue;
+			perror("write");
+			return -1;
+		}
+		offset += l;
+	}
+
+	return offset;
+}
+
+ssize_t write_zero(int fd, size_t len)
+{
+	size_t i = len;
+
+	while (i--) {
+		const char x = 0;
+		if (do_write(fd, &x, 1) < 0)
+			return -1;
+	}
+
+	return len;
+}
+
+int main(void)
+{
+	DECLARE_HDR(hdr);
+	char boot_program[MAX_BOOT_PROG_LEN];
+	size_t aligned_hdr_len, alligned_prog_len;
+	ssize_t prog_len;
+
+	prog_len = do_read(0, boot_program, sizeof(boot_program));
+	if (prog_len <= 0)
+		return -1;
+
+	aligned_hdr_len = ROUND_UP(sizeof(hdr));
+	hdr.start_address = htole32(START_BASE + aligned_hdr_len);
+	alligned_prog_len = ROUND_UP(prog_len);
+	hdr.copy_size = htole16(aligned_hdr_len + alligned_prog_len);
+
+	if (do_write(1, &hdr, sizeof(hdr)) < 0)
+		return -1;
+	if (write_zero(1, aligned_hdr_len - sizeof(hdr)) < 0)
+		return -1;
+
+	if (do_write(1, boot_program, prog_len) < 0)
+		return 1;
+
+	/* Write out the rest of the kernel */
+	while (1) {
+		prog_len = do_read(0, boot_program, sizeof(boot_program));
+		if (prog_len < 0)
+			return 1;
+		if (prog_len == 0)
+			break;
+		if (do_write(1, boot_program, prog_len) < 0)
+			return 1;
+	}
+
+	return 0;
+}

Documentation/arm/SH-Mobile/zboot-rom-mmcif.txt

@@ -0,0 +1,29 @@
+ROM-able zImage boot from MMC
+-----------------------------
+
+An ROM-able zImage compiled with ZBOOT_ROM_MMCIF may be written to MMC and
+SuperH Mobile ARM will to boot directly from the MMCIF hardware block.
+
+This is achieved by the mask ROM loading the first portion of the image into
+MERAM and then jumping to it. This portion contains loader code which
+copies the entire image to SDRAM and jumps to it. From there the zImage
+boot code proceeds as normal, uncompressing the image into its final
+location and then jumping to it.
+
+This code has been tested on an AP4EB board using the developer 1A eMMC
+boot mode which is configured using the following jumper settings.
+The board used for testing required a patched mask ROM in order for
+this mode to function.
+
+   8 7 6 5 4 3 2 1
+   x|x|x|x|x| |x|
+S4 -+-+-+-+-+-+-+-
+    | | | | |x| |x on
+
+The zImage must be written to the MMC card at sector 1 (512 bytes) in
+vrl4 format. A utility vrl4 is supplied to accomplish this.
+
+e.g.
+	vrl4 < zImage | dd of=/dev/sdX bs=512 seek=1
+
+A dual-voltage MMC 4.0 card was used for testing.

Documentation/arm/Sharp-LH/ADC-LH7-Touchscreen

@@ -1,61 +0,0 @@
-README on the ADC/Touchscreen Controller
-========================================
-
-The LH79524 and LH7A404 include a built-in Analog to Digital
-controller (ADC) that is used to process input from a touchscreen.
-The driver only implements a four-wire touch panel protocol.
-
-The touchscreen driver is maintenance free except for the pen-down or
-touch threshold.  Some resistive displays and board combinations may
-require tuning of this threshold.  The driver exposes some of its
-internal state in the sys filesystem.  If the kernel is configured
-with it, CONFIG_SYSFS, and sysfs is mounted at /sys, there will be a
-directory
-
-  /sys/devices/platform/adc-lh7.0
-
-containing these files.
-
-  -r--r--r--    1 root     root         4096 Jan  1 00:00 samples
-  -rw-r--r--    1 root     root         4096 Jan  1 00:00 threshold
-  -r--r--r--    1 root     root         4096 Jan  1 00:00 threshold_range
-
-The threshold is the current touch threshold.  It defaults to 750 on
-most targets.
-
-  # cat threshold
- 750
-
-The threshold_range contains the range of valid values for the
-threshold.  Values outside of this range will be silently ignored.
-
-  # cat threshold_range
-  0 1023
-
-To change the threshold, write a value to the threshold file.
-
-  # echo 500 > threshold
-  # cat threshold
-  500
-
-The samples file contains the most recently sampled values from the
-ADC.  There are 12.  Below are typical of the last sampled values when
-the pen has been released.  The first two and last two samples are for
-detecting whether or not the pen is down.  The third through sixth are
-X coordinate samples.  The seventh through tenth are Y coordinate
-samples.
-
-  # cat samples
-  1023 1023 0 0 0 0 530 529 530 529 1023 1023
-
-To determine a reasonable threshold, press on the touch panel with an
-appropriate stylus and read the values from samples.
-
-  # cat samples
-  1023 676 92 103 101 102 855 919 922 922 1023 679
-
-The first and eleventh samples are discarded.  Thus, the important
-values are the second and twelfth which are used to determine if the
-pen is down.  When both are below the threshold, the driver registers
-that the pen is down.  When either is above the threshold, it
-registers then pen is up.

Documentation/arm/Sharp-LH/CompactFlash

@@ -1,32 +0,0 @@
-README on the Compact Flash for Card Engines
-============================================
-
-There are three challenges in supporting the CF interface of the Card
-Engines.  First, every IO operation must be followed with IO to
-another memory region.  Second, the slot is wired for one-to-one
-address mapping *and* it is wired for 16 bit access only.  Second, the
-interrupt request line from the CF device isn't wired.
-
-The IOBARRIER issue is covered in README.IOBARRIER.  This isn't an
-onerous problem.  Enough said here.
-
-The addressing issue is solved in the
-arch/arm/mach-lh7a40x/ide-lpd7a40x.c file with some awkward
-work-arounds.  We implement a special SELECT_DRIVE routine that is
-called before the IDE driver performs its own SELECT_DRIVE.  Our code
-recognizes that the SELECT register cannot be modified without also
-writing a command.  It send an IDLE_IMMEDIATE command on selecting a
-drive.  The function also prevents drive select to the slave drive
-since there can be only one.  The awkward part is that the IDE driver,
-even though we have a select procedure, also attempts to change the
-drive by writing directly the SELECT register.  This attempt is
-explicitly blocked by the OUTB function--not pretty, but effective.
-
-The lack of interrupts is a more serious problem.  Even though the CF
-card is fast when compared to a normal IDE device, we don't know that
-the CF is really flash.  A user could use one of the very small hard
-drives being shipped with a CF interface.  The IDE code includes a
-check for interfaces that lack an IRQ.  In these cases, submitting a
-command to the IDE controller is followed by a call to poll for
-completion.  If the device isn't immediately ready, it schedules a
-timer to poll again later.

Documentation/arm/Sharp-LH/IOBarrier

@@ -1,45 +0,0 @@
-README on the IOBARRIER for CardEngine IO
-=========================================
-
-Due to an unfortunate oversight when the Card Engines were designed,
-the signals that control access to some peripherals, most notably the
-SMC91C9111 ethernet controller, are not properly handled.
-
-The symptom is that some back to back IO with the peripheral returns
-unreliable data.  With the SMC chip, you'll see errors about the bank
-register being 'screwed'.
-
-The cause is that the AEN signal to the SMC chip does not transition
-for every memory access.  It is driven through the CPLD from the CS7
-line of the CPU's static memory controller which is optimized to
-eliminate unnecessary transitions.  Yet, the SMC requires a transition
-for every write access.  The Sharp website has more information about
-the effect this power-conserving feature has on peripheral
-interfacing.
-
-The solution is to follow every write access to the SMC chip with an
-access to another memory region that will force the CPU to release the
-chip select line.  It is important to guarantee that this access
-forces the CPU off-chip.  We map a page of SDRAM as if it were an
-uncacheable IO device and read from it after every SMC IO write
-operation.
-
-  SMC IO
-  BARRIER IO
-
-Only this sequence is important.  It does not matter that there is no
-BARRIER IO before the access to the SMC chip because the AEN latch
-only needs occurs after the SMC IO write cycle.  The routines that
-implement this work-around make an additional concession which is to
-disable interrupts during the IO sequence.  Other hardware devices
-(the LogicPD CPLD) have registers in the same physical memory
-region as the SMC chip.  An interrupt might allow an access to one of
-those registers while SMC IO is being performed.
-
-You might be tempted to think that we have to access another device
-attached to the static memory controller, but the empirical evidence
-indicates that this is not so.  Mapping 0x00000000 (flash) and
-0xc0000000 (SDRAM) appear to have the same effect.  Using SDRAM seems
-to be faster.  Choosing to access an undecoded memory region is not
-desirable as there is no way to know how that chip select will be used
-in the future.

Documentation/arm/Sharp-LH/KEV7A400

@@ -1,8 +0,0 @@
-README on Implementing Linux for Sharp's KEV7a400
-=================================================
-
-This product has been discontinued by Sharp.  For the time being, the
-partially implemented code remains in the kernel.  At some point in
-the future, either the code will be finished or it will be removed
-completely.  This depends primarily on how many of the development
-boards are in the field.

Documentation/arm/Sharp-LH/LCDPanels

@@ -1,59 +0,0 @@
-README on the LCD Panels
-========================
-
-Configuration options for several LCD panels, available from Logic PD,
-are included in the kernel source.  This README will help you
-understand the configuration data and give you some guidance for
-adding support for other panels if you wish.
-
-
-lcd-panels.h
-------------
-
-There is no way, at present, to detect which panel is attached to the
-system at runtime.  Thus the kernel configuration is static.  The file
-arch/arm/mach-ld7a40x/lcd-panels.h (or similar) defines all of the
-panel specific parameters.
-
-It should be possible for this data to be shared among several device
-families.  The current layout may be insufficiently general, but it is
-amenable to improvement.
-
-
-PIXEL_CLOCK
------------
-
-The panel data sheets will give a range of acceptable pixel clocks.
-The fundamental LCDCLK input frequency is divided down by a PCD
-constant in field '.tim2'.  It may happen that it is impossible to set
-the pixel clock within this range.  A clock which is too slow will
-tend to flicker.  For the highest quality image, set the clock as high
-as possible.
-
-
-MARGINS
--------
-
-These values may be difficult to glean from the panel data sheet.  In
-the case of the Sharp panels, the upper margin is explicitly called
-out as a specific number of lines from the top of the frame.  The
-other values may not matter as much as the panels tend to
-automatically center the image.
-
-
-Sync Sense
-----------
-
-The sense of the hsync and vsync pulses may be called out in the data
-sheet.  On one panel, the sense of these pulses determine the height
-of the visible region on the panel.  Most of the Sharp panels use
-negative sense sync pulses set by the TIM2_IHS and TIM2_IVS bits in
-'.tim2'.
-
-
-Pel Layout
-----------
-
-The Sharp color TFT panels are all configured for 16 bit direct color
-modes.  The amba-lcd driver sets the pel mode to 565 for 5 bits of
-each red and blue and 6 bits of green.

Documentation/arm/Sharp-LH/LPD7A400

@@ -1,15 +0,0 @@
-README on Implementing Linux for the Logic PD LPD7A400-10
-=========================================================
-
-- CPLD memory mapping
-
-  The board designers chose to use high address lines for controlling
-  access to the CPLD registers.  It turns out to be a big waste
-  because we're using an MMU and must map IO space into virtual
-  memory.  The result is that we have to make a mapping for every
-  register.
-
-- Serial Console
-
-  It may be OK not to use the serial console option if the user passes
-  the console device name to the kernel.  This deserves some exploration.

Documentation/arm/Sharp-LH/LPD7A40X

@@ -1,16 +0,0 @@
-README on Implementing Linux for the Logic PD LPD7A40X-10
-=========================================================
-
-- CPLD memory mapping
-
-  The board designers chose to use high address lines for controlling
-  access to the CPLD registers.  It turns out to be a big waste
-  because we're using an MMU and must map IO space into virtual
-  memory.  The result is that we have to make a mapping for every
-  register.
-
-- Serial Console
-
-  It may be OK not to use the serial console option if the user passes
-  the console device name to the kernel.  This deserves some exploration.
-

Documentation/arm/Sharp-LH/SDRAM

@@ -1,51 +0,0 @@
-README on the SDRAM Controller for the LH7a40X
-==============================================
-
-The standard configuration for the SDRAM controller generates a sparse
-memory array.  The precise layout is determined by the SDRAM chips.  A
-default kernel configuration assembles the discontiguous memory
-regions into separate memory nodes via the NUMA (Non-Uniform Memory
-Architecture) facilities.  In this default configuration, the kernel
-is forgiving about the precise layout.  As long as it is given an
-accurate picture of available memory by the bootloader the kernel will
-execute correctly.
-
-The SDRC supports a mode where some of the chip select lines are
-swapped in order to make SDRAM look like a synchronous ROM.  Setting
-this bit means that the RAM will present as a contiguous array.  Some
-programmers prefer this to the discontiguous layout.  Be aware that
-may be a penalty for this feature where some some configurations of
-memory are significantly reduced; i.e. 64MiB of RAM appears as only 32
-MiB.
-
-There are a couple of configuration options to override the default
-behavior.  When the SROMLL bit is set and memory appears as a
-contiguous array, there is no reason to support NUMA.
-CONFIG_LH7A40X_CONTIGMEM disables NUMA support.  When physical memory
-is discontiguous, the memory tables are organized such that there are
-two banks per nodes with a small gap between them.  This layout wastes
-some kernel memory for page tables representing non-existent memory.
-CONFIG_LH7A40X_ONE_BANK_PER_NODE optimizes the node tables such that
-there are no gaps.  These options control the low level organization
-of the memory management tables in ways that may prevent the kernel
-from booting or may cause the kernel to allocated excessively large
-page tables.  Be warned.  Only change these options if you know what
-you are doing.  The default behavior is a reasonable compromise that
-will suit all users.
-
---
-
-A typical 32MiB system with the default configuration options will
-find physical memory managed as follows.
-
-   node 0: 0xc0000000 4MiB
-           0xc1000000 4MiB
-   node 1: 0xc4000000 4MiB
-           0xc5000000 4MiB
-   node 2: 0xc8000000 4MiB
-           0xc9000000 4MiB
-   node 3: 0xcc000000 4MiB
-           0xcd000000 4MiB
-
-Setting CONFIG_LH7A40X_ONE_BANK_PER_NODE will put each bank into a
-separate node.

Documentation/arm/Sharp-LH/VectoredInterruptController

@@ -1,80 +0,0 @@
-README on the Vectored Interrupt Controller of the LH7A404
-==========================================================
-
-The 404 revision of the LH7A40X series comes with two vectored
-interrupts controllers.  While the kernel does use some of the
-features of these devices, it is far from the purpose for which they
-were designed.
-
-When this README was written, the implementation of the VICs was in
-flux.  It is possible that some details, especially with priorities,
-will change.
-
-The VIC support code is inspired by routines written by Sharp.
-
-
-Priority Control
-----------------
-
-The significant reason for using the VIC's vectoring is to control
-interrupt priorities.  There are two tables in
-arch/arm/mach-lh7a40x/irq-lh7a404.c that look something like this.
-
-  static unsigned char irq_pri_vic1[] = { IRQ_GPIO3INTR, };
-  static unsigned char irq_pri_vic2[] = {
-	IRQ_T3UI, IRQ_GPIO7INTR,
-	IRQ_UART1INTR, IRQ_UART2INTR, IRQ_UART3INTR, };
-
-The initialization code reads these tables and inserts a vector
-address and enable for each indicated IRQ.  Vectored interrupts have
-higher priority than non-vectored interrupts.  So, on VIC1,
-IRQ_GPIO3INTR will be served before any other non-FIQ interrupt.  Due
-to the way that the vectoring works, IRQ_T3UI is the next highest
-priority followed by the other vectored interrupts on VIC2.  After
-that, the non-vectored interrupts are scanned in VIC1 then in VIC2.
-
-
-ISR
----
-
-The interrupt service routine macro get_irqnr() in
-arch/arm/kernel/entry-armv.S scans the VICs for the next active
-interrupt.  The vectoring makes this code somewhat larger than it was
-before using vectoring (refer to the LH7A400 implementation).  In the
-case where an interrupt is vectored, the implementation will tend to
-be faster than the non-vectored version.  However, the worst-case path
-is longer.
-
-It is worth noting that at present, there is no need to read
-VIC2_VECTADDR because the register appears to be shared between the
-controllers.  The code is written such that if this changes, it ought
-to still work properly.
-
-
-Vector Addresses
-----------------
-
-The proper use of the vectoring hardware would jump to the ISR
-specified by the vectoring address.  Linux isn't structured to take
-advantage of this feature, though it might be possible to change
-things to support it.
-
-In this implementation, the vectoring address is used to speed the
-search for the active IRQ.  The address is coded such that the lowest
-6 bits store the IRQ number for vectored interrupts.  These numbers
-correspond to the bits in the interrupt status registers.  IRQ zero is
-the lowest interrupt bit in VIC1.  IRQ 32 is the lowest interrupt bit
-in VIC2.  Because zero is a valid IRQ number and because we cannot
-detect whether or not there is a valid vectoring address if that
-address is zero, the eigth bit (0x100) is set for vectored interrupts.
-The address for IRQ 0x18 (VIC2) is 0x118.  Only the ninth bit is set
-for the default handler on VIC1 and only the tenth bit is set for the
-default handler on VIC2.
-
-In other words.
-
-  0x000		- no active interrupt
-  0x1ii		- vectored interrupt 0xii
-  0x2xx		- unvectored interrupt on VIC1 (xx is don't care)
-  0x4xx		- unvectored interrupt on VIC2 (xx is don't care)
-

Documentation/cgroups/cgroups.txt

@@ -349,6 +349,10 @@ To mount a cgroup hierarchy with all available subsystems, type:
 The "xxx" is not interpreted by the cgroup code, but will appear in
 /proc/mounts so may be any useful identifying string that you like.
 
+Note: Some subsystems do not work without some user input first.  For instance,
+if cpusets are enabled the user will have to populate the cpus and mems files
+for each new cgroup created before that group can be used.
+
 To mount a cgroup hierarchy with just the cpuset and memory
 subsystems, type:
 # mount -t cgroup -o cpuset,memory hier1 /dev/cgroup
@@ -426,6 +430,14 @@ You can attach the current shell task by echoing 0:
 
 # echo 0 > tasks
 
+Note: Since every task is always a member of exactly one cgroup in each
+mounted hierarchy, to remove a task from its current cgroup you must
+move it into a new cgroup (possibly the root cgroup) by writing to the
+new cgroup's tasks file.
+
+Note: If the ns cgroup is active, moving a process to another cgroup can
+fail.
+
 2.3 Mounting hierarchies by name
 --------------------------------
 

Documentation/devicetree/00-INDEX

@@ -0,0 +1,10 @@
+Documentation for device trees, a data structure by which bootloaders pass
+hardware layout to Linux in a device-independent manner, simplifying hardware
+probing.  This subsystem is maintained by Grant Likely
+<grant.likely@secretlab.ca> and has a mailing list at
+https://lists.ozlabs.org/listinfo/devicetree-discuss
+
+00-INDEX
+	- this file
+booting-without-of.txt
+	- Booting Linux without Open Firmware, describes history and format of device trees.

Documentation/devicetree/bindings/i2c/ce4100-i2c.txt

@@ -0,0 +1,93 @@
+CE4100 I2C
+----------
+
+CE4100 has one PCI device which is described as the I2C-Controller. This
+PCI device has three PCI-bars, each bar contains a complete I2C
+controller. So we have a total of three independent I2C-Controllers
+which share only an interrupt line.
+The driver is probed via the PCI-ID and is gathering the information of
+attached devices from the devices tree.
+Grant Likely recommended to use the ranges property to map the PCI-Bar
+number to its physical address and to use this to find the child nodes
+of the specific I2C controller. This were his exact words:
+
+       Here's where the magic happens.  Each entry in
+       ranges describes how the parent pci address space
+       (middle group of 3) is translated to the local
+       address space (first group of 2) and the size of
+       each range (last cell).  In this particular case,
+       the first cell of the local address is chosen to be
+       1:1 mapped to the BARs, and the second is the
+       offset from be base of the BAR (which would be
+       non-zero if you had 2 or more devices mapped off
+       the same BAR)
+
+       ranges allows the address mapping to be described
+       in a way that the OS can interpret without
+       requiring custom device driver code.
+
+This is an example which is used on FalconFalls:
+------------------------------------------------
+	i2c-controller@b,2 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		compatible = "pci8086,2e68.2",
+				"pci8086,2e68",
+				"pciclass,ff0000",
+				"pciclass,ff00";
+
+		reg = <0x15a00 0x0 0x0 0x0 0x0>;
+		interrupts = <16 1>;
+
+		/* as described by Grant, the first number in the group of
+		* three is the bar number followed by the 64bit bar address
+		* followed by size of the mapping. The bar address
+		* requires also a valid translation in parents ranges
+		* property.
+		*/
+		ranges = <0 0   0x02000000 0 0xdffe0500 0x100
+			  1 0   0x02000000 0 0xdffe0600 0x100
+			  2 0   0x02000000 0 0xdffe0700 0x100>;
+
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "intel,ce4100-i2c-controller";
+
+			/* The first number in the reg property is the
+			* number of the bar
+			*/
+			reg = <0 0 0x100>;
+
+			/* This I2C controller has no devices */
+		};
+
+		i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "intel,ce4100-i2c-controller";
+			reg = <1 0 0x100>;
+
+			/* This I2C controller has one gpio controller */
+			gpio@26 {
+				#gpio-cells = <2>;
+				compatible = "ti,pcf8575";
+				reg = <0x26>;
+				gpio-controller;
+			};
+		};
+
+		i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "intel,ce4100-i2c-controller";
+			reg = <2 0 0x100>;
+
+			gpio@26 {
+				#gpio-cells = <2>;
+				compatible = "ti,pcf8575";
+				reg = <0x26>;
+				gpio-controller;
+			};
+		};
+	};

Documentation/devicetree/bindings/rtc/rtc-cmos.txt

@@ -0,0 +1,28 @@
+ Motorola mc146818 compatible RTC
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Required properties:
+  - compatible : "motorola,mc146818"
+  - reg : should contain registers location and length.
+
+Optional properties:
+  - interrupts : should contain interrupt.
+  - interrupt-parent : interrupt source phandle.
+  - ctrl-reg : Contains the initial value of the control register also
+    called "Register B".
+  - freq-reg : Contains the initial value of the frequency register also
+    called "Regsiter A".
+
+"Register A" and "B" are usually initialized by the firmware (BIOS for
+instance). If this is not done, it can be performed by the driver.
+
+ISA Example:
+
+	rtc@70 {
+	         compatible = "motorola,mc146818";
+	         interrupts = <8 3>;
+	         interrupt-parent = <&ioapic1>;
+	         ctrl-reg = <2>;
+	         freq-reg = <0x26>;
+	         reg = <1 0x70 2>;
+	 };

Documentation/devicetree/bindings/serial/altera_jtaguart.txt

@@ -0,0 +1,4 @@
+Altera JTAG UART
+
+Required properties:
+- compatible : should be "ALTR,juart-1.0"

Documentation/devicetree/bindings/serial/altera_uart.txt

@@ -0,0 +1,7 @@
+Altera UART
+
+Required properties:
+- compatible : should be "ALTR,uart-1.0"
+
+Optional properties:
+- clock-frequency : frequency of the clock input to the UART

Documentation/devicetree/bindings/serio/altera_ps2.txt

@@ -0,0 +1,4 @@
+Altera UP PS/2 controller
+
+Required properties:
+- compatible : should be "ALTR,ps2-1.0".

Documentation/devicetree/bindings/x86/ce4100.txt

@@ -0,0 +1,38 @@
+CE4100 Device Tree Bindings
+---------------------------
+
+The CE4100 SoC uses for in core peripherals the following compatible
+format: <vendor>,<chip>-<device>.
+Many of the "generic" devices like HPET or IO APIC have the ce4100
+name in their compatible property because they first appeared in this
+SoC.
+
+The CPU node
+------------
+	cpu@0 {
+		device_type = "cpu";
+		compatible = "intel,ce4100";
+		reg = <0>;
+		lapic = <&lapic0>;
+	};
+
+The reg property describes the CPU number. The lapic property points to
+the local APIC timer.
+
+The SoC node
+------------
+
+This node describes the in-core peripherals. Required property:
+  compatible = "intel,ce4100-cp";
+
+The PCI node
+------------
+This node describes the PCI bus on the SoC. Its property should be
+  compatible = "intel,ce4100-pci", "pci";
+
+If the OS is using the IO-APIC for interrupt routing then the reported
+interrupt numbers for devices is no longer true. In order to obtain the
+correct interrupt number, the child node which represents the device has
+to contain the interrupt property. Besides the interrupt property it has
+to contain at least the reg property containing the PCI bus address and
+compatible property according to "PCI Bus Binding Revision 2.1".

Documentation/devicetree/bindings/x86/interrupt.txt

@@ -0,0 +1,26 @@
+Interrupt chips
+---------------
+
+* Intel I/O Advanced Programmable Interrupt Controller (IO APIC)
+
+  Required properties:
+  --------------------
+     compatible = "intel,ce4100-ioapic";
+     #interrupt-cells = <2>;
+
+  Device's interrupt property:
+
+     interrupts = <P S>;
+
+  The first number (P) represents the interrupt pin which is wired to the
+  IO APIC. The second number (S) represents the sense of interrupt which
+  should be configured and can be one of:
+    0 - Edge Rising
+    1 - Level Low
+    2 - Level High
+    3 - Edge Falling
+
+* Local APIC
+  Required property:
+
+     compatible = "intel,ce4100-lapic";

Documentation/devicetree/bindings/x86/timer.txt

@@ -0,0 +1,6 @@
+Timers
+------
+
+* High Precision Event Timer (HPET)
+  Required property:
+     compatible = "intel,ce4100-hpet";

Documentation/devicetree/booting-without-of.txt

@@ -13,7 +13,7 @@ Table of Contents
 
   I - Introduction
     1) Entry point for arch/powerpc
-    2) Entry point for arch/arm
+    2) Entry point for arch/x86
 
   II - The DT block format
     1) Header
@@ -226,45 +226,25 @@ it with special cases.
   cannot support both configurations with Book E and configurations
   with classic Powerpc architectures.
 
-2) Entry point for arch/arm
----------------------------
-
-   There is one single entry point to the kernel, at the start
-   of the kernel image. That entry point supports two calling
-   conventions.  A summary of the interface is described here.  A full
-   description of the boot requirements is documented in
-   Documentation/arm/Booting
-
-        a) ATAGS interface.  Minimal information is passed from firmware
-        to the kernel with a tagged list of predefined parameters.
-
-                r0 : 0
-
-                r1 : Machine type number
-
-                r2 : Physical address of tagged list in system RAM
-
-        b) Entry with a flattened device-tree block.  Firmware loads the
-        physical address of the flattened device tree block (dtb) into r2,
-        r1 is not used, but it is considered good practise to use a valid
-        machine number as described in Documentation/arm/Booting.
-
-                r0 : 0
-
-                r1 : Valid machine type number.  When using a device tree,
-                a single machine type number will often be assigned to
-                represent a class or family of SoCs.
-
-                r2 : physical pointer to the device-tree block
-                (defined in chapter II) in RAM.  Device tree can be located
-                anywhere in system RAM, but it should be aligned on a 32 bit
-                boundary.
-
-   The kernel will differentiate between ATAGS and device tree booting by
-   reading the memory pointed to by r1 and looking for either the flattened
-   device tree block magic value (0xd00dfeed) or the ATAG_CORE value at
-   offset 0x4 from r2 (0x54410001).
+2) Entry point for arch/x86
+-------------------------------
 
+  There is one single 32bit entry point to the kernel at code32_start,
+  the decompressor (the real mode entry point goes to the same  32bit
+  entry point once it switched into protected mode). That entry point
+  supports one calling convention which is documented in
+  Documentation/x86/boot.txt
+  The physical pointer to the device-tree block (defined in chapter II)
+  is passed via setup_data which requires at least boot protocol 2.09.
+  The type filed is defined as
+
+  #define SETUP_DTB                      2
+
+  This device-tree is used as an extension to the "boot page". As such it
+  does not parse / consider data which is already covered by the boot
+  page. This includes memory size, reserved ranges, command line arguments
+  or initrd address. It simply holds information which can not be retrieved
+  otherwise like interrupt routing or a list of devices behind an I2C bus.
 
 II - The DT block format
 ========================

Documentation/dynamic-debug-howto.txt

@@ -205,12 +205,20 @@ of the characters:
 
 The flags are:
 
+f
+    Include the function name in the printed message
+l
+    Include line number in the printed message
+m
+    Include module name in the printed message
 p
     Causes a printk() message to be emitted to dmesg
+t
+    Include thread ID in messages not generated from interrupt context
 
-Note the regexp ^[-+=][scp]+$ matches a flags specification.
+Note the regexp ^[-+=][flmpt]+$ matches a flags specification.
 Note also that there is no convenient syntax to remove all
-the flags at once, you need to use "-psc".
+the flags at once, you need to use "-flmpt".
 
 
 Debug messages during boot process

Documentation/feature-removal-schedule.txt

@@ -35,6 +35,17 @@ Who:	Luis R. Rodriguez <lrodriguez@atheros.com>
 
 ---------------------------
 
+What:	AR9170USB
+When:	2.6.40
+
+Why:	This driver is deprecated and the firmware is no longer
+	maintained. The replacement driver "carl9170" has been
+	around for a while, so the devices are still supported.
+
+Who:	Christian Lamparter <chunkeey@googlemail.com>
+
+---------------------------
+
 What:	IRQF_SAMPLE_RANDOM
 Check:	IRQF_SAMPLE_RANDOM
 When:	July 2009
@@ -604,6 +615,13 @@ Who:	Jean Delvare <khali@linux-fr.org>
 
 ----------------------------
 
+What:	xt_connlimit rev 0
+When:	2012
+Who:	Jan Engelhardt <jengelh@medozas.de>
+Files:	net/netfilter/xt_connlimit.c
+
+----------------------------
+
 What:	noswapaccount kernel command line parameter
 When:	2.6.40
 Why:	The original implementation of memsw feature enabled by
@@ -619,3 +637,11 @@ Why:	The original implementation of memsw feature enabled by
 Who:	Michal Hocko <mhocko@suse.cz>
 
 ----------------------------
+
+What:	ipt_addrtype match include file
+When:	2012
+Why:	superseded by xt_addrtype
+Who:	Florian Westphal <fw@strlen.de>
+Files:	include/linux/netfilter_ipv4/ipt_addrtype.h
+
+----------------------------

Documentation/filesystems/Locking

@@ -166,13 +166,11 @@ prototypes:
 	void (*kill_sb) (struct super_block *);
 locking rules:
 		may block
-get_sb		yes
 mount		yes
 kill_sb		yes
 
-->get_sb() returns error or 0 with locked superblock attached to the vfsmount
-(exclusive on ->s_umount).
-->mount() returns ERR_PTR or the root dentry.
+->mount() returns ERR_PTR or the root dentry; its superblock should be locked
+on return.
 ->kill_sb() takes a write-locked superblock, does all shutdown work on it,
 unlocks and drops the reference.
 

Documentation/filesystems/porting

@@ -394,3 +394,10 @@ file) you must return -EOPNOTSUPP if FALLOC_FL_PUNCH_HOLE is set in mode.
 Currently you can only have FALLOC_FL_PUNCH_HOLE with FALLOC_FL_KEEP_SIZE set,
 so the i_size should not change when hole punching, even when puching the end of
 a file off.
+
+--
+[mandatory]
+	->get_sb() is gone.  Switch to use of ->mount().  Typically it's just
+a matter of switching from calling get_sb_... to mount_... and changing the
+function type.  If you were doing it manually, just switch from setting ->mnt_root
+to some pointer to returning that pointer.  On errors return ERR_PTR(...).

Documentation/filesystems/sysfs.txt

@@ -39,10 +39,12 @@ userspace. Top-level directories in sysfs represent the common
 ancestors of object hierarchies; i.e. the subsystems the objects
 belong to. 
 
-Sysfs internally stores the kobject that owns the directory in the
-->d_fsdata pointer of the directory's dentry. This allows sysfs to do
-reference counting directly on the kobject when the file is opened and
-closed. 
+Sysfs internally stores a pointer to the kobject that implements a
+directory in the sysfs_dirent object associated with the directory. In
+the past this kobject pointer has been used by sysfs to do reference
+counting directly on the kobject whenever the file is opened or closed.
+With the current sysfs implementation the kobject reference count is
+only modified directly by the function sysfs_schedule_callback().
 
 
 Attributes
@@ -208,9 +210,9 @@ Other notes:
   is 4096. 
 
 - show() methods should return the number of bytes printed into the
-  buffer. This is the return value of snprintf().
+  buffer. This is the return value of scnprintf().
 
-- show() should always use snprintf(). 
+- show() should always use scnprintf().
 
 - store() should return the number of bytes used from the buffer. If the
   entire buffer has been used, just return the count argument.
@@ -229,7 +231,7 @@ A very simple (and naive) implementation of a device attribute is:
 static ssize_t show_name(struct device *dev, struct device_attribute *attr,
                          char *buf)
 {
-	return snprintf(buf, PAGE_SIZE, "%s\n", dev->name);
+	return scnprintf(buf, PAGE_SIZE, "%s\n", dev->name);
 }
 
 static ssize_t store_name(struct device *dev, struct device_attribute *attr,

Documentation/filesystems/vfs.txt

@@ -95,10 +95,11 @@ functions:
    extern int unregister_filesystem(struct file_system_type *);
 
 The passed struct file_system_type describes your filesystem. When a
-request is made to mount a device onto a directory in your filespace,
-the VFS will call the appropriate get_sb() method for the specific
-filesystem. The dentry for the mount point will then be updated to
-point to the root inode for the new filesystem.
+request is made to mount a filesystem onto a directory in your namespace,
+the VFS will call the appropriate mount() method for the specific
+filesystem.  New vfsmount refering to the tree returned by ->mount()
+will be attached to the mountpoint, so that when pathname resolution
+reaches the mountpoint it will jump into the root of that vfsmount.
 
 You can see all filesystems that are registered to the kernel in the
 file /proc/filesystems.
@@ -107,14 +108,14 @@ file /proc/filesystems.
 struct file_system_type
 -----------------------
 
-This describes the filesystem. As of kernel 2.6.22, the following
+This describes the filesystem. As of kernel 2.6.39, the following
 members are defined:
 
 struct file_system_type {
 	const char *name;
 	int fs_flags;
-        int (*get_sb) (struct file_system_type *, int,
-                       const char *, void *, struct vfsmount *);
+        struct dentry (*mount) (struct file_system_type *, int,
+                       const char *, void *);
         void (*kill_sb) (struct super_block *);
         struct module *owner;
         struct file_system_type * next;
@@ -128,11 +129,11 @@ struct file_system_type {
 
   fs_flags: various flags (i.e. FS_REQUIRES_DEV, FS_NO_DCACHE, etc.)
 
-  get_sb: the method to call when a new instance of this
+  mount: the method to call when a new instance of this
 	filesystem should be mounted
 
   kill_sb: the method to call when an instance of this filesystem
-	should be unmounted
+	should be shut down
 
   owner: for internal VFS use: you should initialize this to THIS_MODULE in
   	most cases.
@@ -141,7 +142,7 @@ struct file_system_type {
 
   s_lock_key, s_umount_key: lockdep-specific
 
-The get_sb() method has the following arguments:
+The mount() method has the following arguments:
 
   struct file_system_type *fs_type: describes the filesystem, partly initialized
   	by the specific filesystem code
@@ -153,32 +154,39 @@ The get_sb() method has the following arguments:
   void *data: arbitrary mount options, usually comes as an ASCII
 	string (see "Mount Options" section)
 
-  struct vfsmount *mnt: a vfs-internal representation of a mount point
+The mount() method must return the root dentry of the tree requested by
+caller.  An active reference to its superblock must be grabbed and the
+superblock must be locked.  On failure it should return ERR_PTR(error).
 
-The get_sb() method must determine if the block device specified
-in the dev_name and fs_type contains a filesystem of the type the method
-supports. If it succeeds in opening the named block device, it initializes a
-struct super_block descriptor for the filesystem contained by the block device.
-On failure it returns an error.
+The arguments match those of mount(2) and their interpretation
+depends on filesystem type.  E.g. for block filesystems, dev_name is
+interpreted as block device name, that device is opened and if it
+contains a suitable filesystem image the method creates and initializes
+struct super_block accordingly, returning its root dentry to caller.
+
+->mount() may choose to return a subtree of existing filesystem - it
+doesn't have to create a new one.  The main result from the caller's
+point of view is a reference to dentry at the root of (sub)tree to
+be attached; creation of new superblock is a common side effect.
 
 The most interesting member of the superblock structure that the
-get_sb() method fills in is the "s_op" field. This is a pointer to
+mount() method fills in is the "s_op" field. This is a pointer to
 a "struct super_operations" which describes the next level of the
 filesystem implementation.
 
-Usually, a filesystem uses one of the generic get_sb() implementations
-and provides a fill_super() method instead. The generic methods are:
+Usually, a filesystem uses one of the generic mount() implementations
+and provides a fill_super() callback instead. The generic variants are:
 
-  get_sb_bdev: mount a filesystem residing on a block device
+  mount_bdev: mount a filesystem residing on a block device
 
-  get_sb_nodev: mount a filesystem that is not backed by a device
+  mount_nodev: mount a filesystem that is not backed by a device
 
-  get_sb_single: mount a filesystem which shares the instance between
+  mount_single: mount a filesystem which shares the instance between
   	all mounts
 
-A fill_super() method implementation has the following arguments:
+A fill_super() callback implementation has the following arguments:
 
-  struct super_block *sb: the superblock structure. The method fill_super()
+  struct super_block *sb: the superblock structure. The callback
   	must initialize this properly.
 
   void *data: arbitrary mount options, usually comes as an ASCII

Documentation/hwmon/jc42

@@ -51,7 +51,8 @@ Supported chips:
   * JEDEC JC 42.4 compliant temperature sensor chips
     Prefix: 'jc42'
     Addresses scanned: I2C 0x18 - 0x1f
-    Datasheet: -
+    Datasheet:
+	http://www.jedec.org/sites/default/files/docs/4_01_04R19.pdf
 
 Author:
 	Guenter Roeck <guenter.roeck@ericsson.com>
@@ -60,7 +61,11 @@ Author:
 Description
 -----------
 
-This driver implements support for JEDEC JC 42.4 compliant temperature sensors.
+This driver implements support for JEDEC JC 42.4 compliant temperature sensors,
+which are used on many DDR3 memory modules for mobile devices and servers. Some
+systems use the sensor to prevent memory overheating by automatically throttling
+the memory controller.
+
 The driver auto-detects the chips listed above, but can be manually instantiated
 to support other JC 42.4 compliant chips.
 
@@ -81,15 +86,19 @@ limits. The chip supports only a single register to configure the hysteresis,
 which applies to all limits. This register can be written by writing into
 temp1_crit_hyst. Other hysteresis attributes are read-only.
 
+If the BIOS has configured the sensor for automatic temperature management, it
+is likely that it has locked the registers, i.e., that the temperature limits
+cannot be changed.
+
 Sysfs entries
 -------------
 
 temp1_input		Temperature (RO)
-temp1_min		Minimum temperature (RW)
-temp1_max		Maximum temperature (RW)
-temp1_crit		Critical high temperature (RW)
+temp1_min		Minimum temperature (RO or RW)
+temp1_max		Maximum temperature (RO or RW)
+temp1_crit		Critical high temperature (RO or RW)
 
-temp1_crit_hyst		Critical hysteresis temperature (RW)
+temp1_crit_hyst		Critical hysteresis temperature (RO or RW)
 temp1_max_hyst		Maximum hysteresis temperature (RO)
 
 temp1_min_alarm		Temperature low alarm

Documentation/hwmon/k10temp

@@ -9,6 +9,8 @@ Supported chips:
   Socket S1G3: Athlon II, Sempron, Turion II
 * AMD Family 11h processors:
   Socket S1G2: Athlon (X2), Sempron (X2), Turion X2 (Ultra)
+* AMD Family 12h processors: "Llano"
+* AMD Family 14h processors: "Brazos" (C/E/G-Series)
 
   Prefix: 'k10temp'
   Addresses scanned: PCI space
@@ -17,10 +19,14 @@ Supported chips:
     http://support.amd.com/us/Processor_TechDocs/31116.pdf
   BIOS and Kernel Developer's Guide (BKDG) for AMD Family 11h Processors:
     http://support.amd.com/us/Processor_TechDocs/41256.pdf
+  BIOS and Kernel Developer's Guide (BKDG) for AMD Family 14h Models 00h-0Fh Processors:
+    http://support.amd.com/us/Processor_TechDocs/43170.pdf
   Revision Guide for AMD Family 10h Processors:
     http://support.amd.com/us/Processor_TechDocs/41322.pdf
   Revision Guide for AMD Family 11h Processors:
     http://support.amd.com/us/Processor_TechDocs/41788.pdf
+  Revision Guide for AMD Family 14h Models 00h-0Fh Processors:
+    http://support.amd.com/us/Processor_TechDocs/47534.pdf
   AMD Family 11h Processor Power and Thermal Data Sheet for Notebooks:
     http://support.amd.com/us/Processor_TechDocs/43373.pdf
   AMD Family 10h Server and Workstation Processor Power and Thermal Data Sheet:
@@ -34,7 +40,7 @@ Description
 -----------
 
 This driver permits reading of the internal temperature sensor of AMD
-Family 10h and 11h processors.
+Family 10h/11h/12h/14h processors.
 
 All these processors have a sensor, but on those for Socket F or AM2+,
 the sensor may return inconsistent values (erratum 319).  The driver

Documentation/kernel-parameters.txt

@@ -144,6 +144,11 @@ a fixed number of characters. This limit depends on the architecture
 and is between 256 and 4096 characters. It is defined in the file
 ./include/asm/setup.h as COMMAND_LINE_SIZE.
 
+Finally, the [KMG] suffix is commonly described after a number of kernel
+parameter values. These 'K', 'M', and 'G' letters represent the _binary_
+multipliers 'Kilo', 'Mega', and 'Giga', equalling 2^10, 2^20, and 2^30
+bytes respectively. Such letter suffixes can also be entirely omitted.
+
 
 	acpi=		[HW,ACPI,X86]
 			Advanced Configuration and Power Interface
@@ -545,16 +550,20 @@ and is between 256 and 4096 characters. It is defined in the file
 			Format:
 			<first_slot>,<last_slot>,<port>,<enum_bit>[,<debug>]
 
-	crashkernel=nn[KMG]@ss[KMG]
-			[KNL] Reserve a chunk of physical memory to
-			hold a kernel to switch to with kexec on panic.
+	crashkernel=size[KMG][@offset[KMG]]
+			[KNL] Using kexec, Linux can switch to a 'crash kernel'
+			upon panic. This parameter reserves the physical
+			memory region [offset, offset + size] for that kernel
+			image. If '@offset' is omitted, then a suitable offset
+			is selected automatically. Check
+			Documentation/kdump/kdump.txt for further details.
 
 	crashkernel=range1:size1[,range2:size2,...][@offset]
 			[KNL] Same as above, but depends on the memory
 			in the running system. The syntax of range is
 			start-[end] where start and end are both
 			a memory unit (amount[KMG]). See also
-			Documentation/kdump/kdump.txt for a example.
+			Documentation/kdump/kdump.txt for an example.
 
 	cs89x0_dma=	[HW,NET]
 			Format: <dma>
@@ -1262,10 +1271,9 @@ and is between 256 and 4096 characters. It is defined in the file
 			6 (KERN_INFO)		informational
 			7 (KERN_DEBUG)		debug-level messages
 
-	log_buf_len=n	Sets the size of the printk ring buffer, in bytes.
-			Format: { n | nk | nM }
-			n must be a power of two.  The default size
-			is set in the kernel config file.
+	log_buf_len=n[KMG]	Sets the size of the printk ring buffer,
+			in bytes.  n must be a power of two.  The default
+			size is set in the kernel config file.
 
 	logo.nologo	[FB] Disables display of the built-in Linux logo.
 			This may be used to provide more screen space for
@@ -2436,6 +2444,10 @@ and is between 256 and 4096 characters. It is defined in the file
 			<deci-seconds>: poll all this frequency
 			0: no polling (default)
 
+	threadirqs	[KNL]
+			Force threading of all interrupt handlers except those
+			marked explicitely IRQF_NO_THREAD.
+
 	topology=	[S390]
 			Format: {off | on}
 			Specify if the kernel should make use of the cpu

Documentation/keys-request-key.txt

@@ -127,14 +127,15 @@ This is because process A's keyrings can't simply be attached to
 of them, and (b) it requires the same UID/GID/Groups all the way through.
 
 
-======================
-NEGATIVE INSTANTIATION
-======================
+====================================
+NEGATIVE INSTANTIATION AND REJECTION
+====================================
 
 Rather than instantiating a key, it is possible for the possessor of an
 authorisation key to negatively instantiate a key that's under construction.
 This is a short duration placeholder that causes any attempt at re-requesting
-the key whilst it exists to fail with error ENOKEY.
+the key whilst it exists to fail with error ENOKEY if negated or the specified
+error if rejected.
 
 This is provided to prevent excessive repeated spawning of /sbin/request-key
 processes for a key that will never be obtainable.

Documentation/keys.txt

@@ -637,6 +637,9 @@ The keyctl syscall functions are:
 	long keyctl(KEYCTL_INSTANTIATE, key_serial_t key,
 		    const void *payload, size_t plen,
 		    key_serial_t keyring);
+	long keyctl(KEYCTL_INSTANTIATE_IOV, key_serial_t key,
+		    const struct iovec *payload_iov, unsigned ioc,
+		    key_serial_t keyring);
 
      If the kernel calls back to userspace to complete the instantiation of a
      key, userspace should use this call to supply data for the key before the
@@ -652,11 +655,16 @@ The keyctl syscall functions are:
 
      The payload and plen arguments describe the payload data as for add_key().
 
+     The payload_iov and ioc arguments describe the payload data in an iovec
+     array instead of a single buffer.
+
 
  (*) Negatively instantiate a partially constructed key.
 
 	long keyctl(KEYCTL_NEGATE, key_serial_t key,
 		    unsigned timeout, key_serial_t keyring);
+	long keyctl(KEYCTL_REJECT, key_serial_t key,
+		    unsigned timeout, unsigned error, key_serial_t keyring);
 
      If the kernel calls back to userspace to complete the instantiation of a
      key, userspace should use this call mark the key as negative before the
@@ -669,6 +677,10 @@ The keyctl syscall functions are:
      that keyring, however all the constraints applying in KEYCTL_LINK apply in
      this case too.
 
+     If the key is rejected, future searches for it will return the specified
+     error code until the rejected key expires.  Negating the key is the same
+     as rejecting the key with ENOKEY as the error code.
+
 
  (*) Set the default request-key destination keyring.
 
@@ -1062,6 +1074,13 @@ The structure has a number of fields, some of which are mandatory:
      viable.
 
 
+ (*) int (*vet_description)(const char *description);
+
+     This optional method is called to vet a key description.  If the key type
+     doesn't approve of the key description, it may return an error, otherwise
+     it should return 0.
+
+
  (*) int (*instantiate)(struct key *key, const void *data, size_t datalen);
 
      This method is called to attach a payload to a key during construction.
@@ -1231,10 +1250,11 @@ hand the request off to (perhaps a path held in placed in another key by, for
 example, the KDE desktop manager).
 
 The program (or whatever it calls) should finish construction of the key by
-calling KEYCTL_INSTANTIATE, which also permits it to cache the key in one of
-the keyrings (probably the session ring) before returning. Alternatively, the
-key can be marked as negative with KEYCTL_NEGATE; this also permits the key to
-be cached in one of the keyrings.
+calling KEYCTL_INSTANTIATE or KEYCTL_INSTANTIATE_IOV, which also permits it to
+cache the key in one of the keyrings (probably the session ring) before
+returning.  Alternatively, the key can be marked as negative with KEYCTL_NEGATE
+or KEYCTL_REJECT; this also permits the key to be cached in one of the
+keyrings.
 
 If it returns with the key remaining in the unconstructed state, the key will
 be marked as being negative, it will be added to the session keyring, and an

Documentation/kref.txt

@@ -156,7 +156,7 @@ static struct my_data *get_entry()
 	struct my_data *entry = NULL;
 	mutex_lock(&mutex);
 	if (!list_empty(&q)) {
-		entry = container_of(q.next, struct my_q_entry, link);
+		entry = container_of(q.next, struct my_data, link);
 		kref_get(&entry->refcount);
 	}
 	mutex_unlock(&mutex);

Documentation/memory-barriers.txt

@@ -21,6 +21,7 @@ Contents:
      - SMP barrier pairing.
      - Examples of memory barrier sequences.
      - Read memory barriers vs load speculation.
+     - Transitivity
 
  (*) Explicit kernel barriers.
 
@@ -959,6 +960,63 @@ the speculation will be cancelled and the value reloaded:
 	retrieved                               :       :       +-------+
 
 
+TRANSITIVITY
+------------
+
+Transitivity is a deeply intuitive notion about ordering that is not
+always provided by real computer systems.  The following example
+demonstrates transitivity (also called "cumulativity"):
+
+	CPU 1			CPU 2			CPU 3
+	=======================	=======================	=======================
+		{ X = 0, Y = 0 }
+	STORE X=1		LOAD X			STORE Y=1
+				<general barrier>	<general barrier>
+				LOAD Y			LOAD X
+
+Suppose that CPU 2's load from X returns 1 and its load from Y returns 0.
+This indicates that CPU 2's load from X in some sense follows CPU 1's
+store to X and that CPU 2's load from Y in some sense preceded CPU 3's
+store to Y.  The question is then "Can CPU 3's load from X return 0?"
+
+Because CPU 2's load from X in some sense came after CPU 1's store, it
+is natural to expect that CPU 3's load from X must therefore return 1.
+This expectation is an example of transitivity: if a load executing on
+CPU A follows a load from the same variable executing on CPU B, then
+CPU A's load must either return the same value that CPU B's load did,
+or must return some later value.
+
+In the Linux kernel, use of general memory barriers guarantees
+transitivity.  Therefore, in the above example, if CPU 2's load from X
+returns 1 and its load from Y returns 0, then CPU 3's load from X must
+also return 1.
+
+However, transitivity is -not- guaranteed for read or write barriers.
+For example, suppose that CPU 2's general barrier in the above example
+is changed to a read barrier as shown below:
+
+	CPU 1			CPU 2			CPU 3
+	=======================	=======================	=======================
+		{ X = 0, Y = 0 }
+	STORE X=1		LOAD X			STORE Y=1
+				<read barrier>		<general barrier>
+				LOAD Y			LOAD X
+
+This substitution destroys transitivity: in this example, it is perfectly
+legal for CPU 2's load from X to return 1, its load from Y to return 0,
+and CPU 3's load from X to return 0.
+
+The key point is that although CPU 2's read barrier orders its pair
+of loads, it does not guarantee to order CPU 1's store.  Therefore, if
+this example runs on a system where CPUs 1 and 2 share a store buffer
+or a level of cache, CPU 2 might have early access to CPU 1's writes.
+General barriers are therefore required to ensure that all CPUs agree
+on the combined order of CPU 1's and CPU 2's accesses.
+
+To reiterate, if your code requires transitivity, use general barriers
+throughout.
+
+
 ========================
 EXPLICIT KERNEL BARRIERS
 ========================

Documentation/memory-hotplug.txt

@@ -126,36 +126,51 @@ config options.
 --------------------------------
 4 sysfs files for memory hotplug
 --------------------------------
-All sections have their device information under /sys/devices/system/memory as
+All sections have their device information in sysfs.  Each section is part of
+a memory block under /sys/devices/system/memory as
 
 /sys/devices/system/memory/memoryXXX
-(XXX is section id.)
+(XXX is the section id.)
 
-Now, XXX is defined as start_address_of_section / section_size.
+Now, XXX is defined as (start_address_of_section / section_size) of the first
+section contained in the memory block.  The files 'phys_index' and
+'end_phys_index' under each directory report the beginning and end section id's
+for the memory block covered by the sysfs directory.  It is expected that all
+memory sections in this range are present and no memory holes exist in the
+range. Currently there is no way to determine if there is a memory hole, but
+the existence of one should not affect the hotplug capabilities of the memory
+block.
 
 For example, assume 1GiB section size. A device for a memory starting at
 0x100000000 is /sys/device/system/memory/memory4
 (0x100000000 / 1Gib = 4)
 This device covers address range [0x100000000 ... 0x140000000)
 
-Under each section, you can see 4 files.
+Under each section, you can see 4 or 5 files, the end_phys_index file being
+a recent addition and not present on older kernels.
 
-/sys/devices/system/memory/memoryXXX/phys_index
+/sys/devices/system/memory/memoryXXX/start_phys_index
+/sys/devices/system/memory/memoryXXX/end_phys_index
 /sys/devices/system/memory/memoryXXX/phys_device
 /sys/devices/system/memory/memoryXXX/state
 /sys/devices/system/memory/memoryXXX/removable
 
-'phys_index' : read-only and contains section id, same as XXX.
-'state'      : read-write
-               at read:  contains online/offline state of memory.
-               at write: user can specify "online", "offline" command
-'phys_device': read-only: designed to show the name of physical memory device.
-               This is not well implemented now.
-'removable'  : read-only: contains an integer value indicating
-               whether the memory section is removable or not
-               removable.  A value of 1 indicates that the memory
-               section is removable and a value of 0 indicates that
-               it is not removable.
+'phys_index'      : read-only and contains section id of the first section
+		    in the memory block, same as XXX.
+'end_phys_index'  : read-only and contains section id of the last section
+		    in the memory block.
+'state'           : read-write
+                    at read:  contains online/offline state of memory.
+                    at write: user can specify "online", "offline" command
+                    which will be performed on al sections in the block.
+'phys_device'     : read-only: designed to show the name of physical memory
+                    device.  This is not well implemented now.
+'removable'       : read-only: contains an integer value indicating
+                    whether the memory block is removable or not
+                    removable.  A value of 1 indicates that the memory
+                    block is removable and a value of 0 indicates that
+                    it is not removable. A memory block is removable only if
+                    every section in the block is removable.
 
 NOTE:
   These directories/files appear after physical memory hotplug phase.

Documentation/networking/00-INDEX

@@ -40,8 +40,6 @@ decnet.txt
 	- info on using the DECnet networking layer in Linux.
 depca.txt
 	- the Digital DEPCA/EtherWORKS DE1?? and DE2?? LANCE Ethernet driver
-dgrs.txt
-	- the Digi International RightSwitch SE-X Ethernet driver
 dmfe.txt
 	- info on the Davicom DM9102(A)/DM9132/DM9801 fast ethernet driver.
 e100.txt
@@ -50,8 +48,6 @@ e1000.txt
 	- info on Intel's E1000 line of gigabit ethernet boards
 eql.txt
 	- serial IP load balancing
-ethertap.txt
-	- the Ethertap user space packet reception and transmission driver
 ewrk3.txt
 	- the Digital EtherWORKS 3 DE203/4/5 Ethernet driver
 filter.txt
@@ -104,8 +100,6 @@ tuntap.txt
 	- TUN/TAP device driver, allowing user space Rx/Tx of packets.
 vortex.txt
 	- info on using 3Com Vortex (3c590, 3c592, 3c595, 3c597) Ethernet cards.
-wavelan.txt
-	- AT&T GIS (nee NCR) WaveLAN card: An Ethernet-like radio transceiver
 x25.txt
 	- general info on X.25 development.
 x25-iface.txt

Documentation/networking/Makefile

@@ -4,6 +4,8 @@ obj- := dummy.o
 # List of programs to build
 hostprogs-y := ifenslave
 
+HOSTCFLAGS_ifenslave.o += -I$(objtree)/usr/include
+
 # Tell kbuild to always build the programs
 always := $(hostprogs-y)
 

Documentation/networking/batman-adv.txt

@@ -1,4 +1,4 @@
-[state: 21-11-2010]
+[state: 27-01-2011]
 
 BATMAN-ADV
 ----------
@@ -67,15 +67,16 @@ All  mesh  wide  settings  can be found in batman's own interface
 folder:
 
 #  ls  /sys/class/net/bat0/mesh/
-#  aggregated_ogms  bonding  fragmentation  orig_interval
-#  vis_mode
+#  aggregated_ogms  gw_bandwidth  hop_penalty
+#  bonding          gw_mode       orig_interval
+#  fragmentation    gw_sel_class  vis_mode
 
 
 There is a special folder for debugging informations:
 
 #  ls /sys/kernel/debug/batman_adv/bat0/
-#  originators  socket  transtable_global  transtable_local
-#  vis_data
+#  gateways     socket        transtable_global  vis_data
+#  originators  softif_neigh  transtable_local
 
 
 Some of the files contain all sort of status information  regard-
@@ -230,9 +231,8 @@ CONTACT
 Please send us comments, experiences, questions, anything :)
 
 IRC:            #batman   on   irc.freenode.org
-Mailing-list:   b.a.t.m.a.n@b.a.t.m.a.n@lists.open-mesh.org
-                (optional   subscription   at
-                 https://lists.open-mesh.org/mm/listinfo/b.a.t.m.a.n)
+Mailing-list:   b.a.t.m.a.n@open-mesh.org (optional  subscription
+          at https://lists.open-mesh.org/mm/listinfo/b.a.t.m.a.n)
 
 You can also contact the Authors:
 

Documentation/networking/bonding.txt

@@ -2558,18 +2558,15 @@ enslaved.
 16. Resources and Links
 =======================
 
-The latest version of the bonding driver can be found in the latest
+	The latest version of the bonding driver can be found in the latest
 version of the linux kernel, found on http://kernel.org
 
-The latest version of this document can be found in either the latest
-kernel source (named Documentation/networking/bonding.txt), or on the
-bonding sourceforge site:
+	The latest version of this document can be found in the latest kernel
+source (named Documentation/networking/bonding.txt).
 
-http://www.sourceforge.net/projects/bonding
-
-Discussions regarding the bonding driver take place primarily on the
-bonding-devel mailing list, hosted at sourceforge.net.  If you have
-questions or problems, post them to the list.  The list address is:
+	Discussions regarding the usage of the bonding driver take place on the
+bonding-devel mailing list, hosted at sourceforge.net. If you have questions or
+problems, post them to the list.  The list address is:
 
 bonding-devel@lists.sourceforge.net
 
@@ -2578,6 +2575,17 @@ be found at:
 
 https://lists.sourceforge.net/lists/listinfo/bonding-devel
 
+	Discussions regarding the developpement of the bonding driver take place
+on the main Linux network mailing list, hosted at vger.kernel.org. The list
+address is:
+
+netdev@vger.kernel.org
+
+	The administrative interface (to subscribe or unsubscribe) can
+be found at:
+
+http://vger.kernel.org/vger-lists.html#netdev
+
 Donald Becker's Ethernet Drivers and diag programs may be found at :
  - http://web.archive.org/web/*/http://www.scyld.com/network/ 
 

Documentation/networking/dns_resolver.txt

@@ -61,7 +61,6 @@ before the more general line given above as the first match is the one taken.
 	create	dns_resolver  	foo:*	*	/usr/sbin/dns.foo %k
 
 
-
 =====
 USAGE
 =====
@@ -104,6 +103,14 @@ implemented in the module can be called after doing:
      returned also.
 
 
+===============================
+READING DNS KEYS FROM USERSPACE
+===============================
+
+Keys of dns_resolver type can be read from userspace using keyctl_read() or
+"keyctl read/print/pipe".
+
+
 =========
 MECHANISM
 =========

Documentation/networking/ip-sysctl.txt

@@ -280,6 +280,17 @@ tcp_max_orphans - INTEGER
 	more aggressively. Let me to remind again: each orphan eats
 	up to ~64K of unswappable memory.
 
+tcp_max_ssthresh - INTEGER
+	Limited Slow-Start for TCP with large congestion windows (cwnd) defined in
+	RFC3742. Limited slow-start is a mechanism to limit growth of the cwnd
+	on the region where cwnd is larger than tcp_max_ssthresh. TCP increases cwnd
+	by at most tcp_max_ssthresh segments, and by at least tcp_max_ssthresh/2
+	segments per RTT when the cwnd is above tcp_max_ssthresh.
+	If TCP connection increased cwnd to thousands (or tens of thousands) segments,
+	and thousands of packets were being dropped during slow-start, you can set
+	tcp_max_ssthresh to improve performance for new TCP connection.
+	Default: 0 (off)
+
 tcp_max_syn_backlog - INTEGER
 	Maximal number of remembered connection requests, which are
 	still did not receive an acknowledgment from connecting client.

Documentation/networking/phonet.txt

@@ -154,9 +154,28 @@ connections, one per accept()'d socket.
     write(cfd, msg, msglen);
   }
 
-Connections are established between two endpoints by a "third party"
-application. This means that both endpoints are passive; so connect()
-is not possible.
+Connections are traditionally established between two endpoints by a
+"third party" application. This means that both endpoints are passive.
+
+
+As of Linux kernel version 2.6.39, it is also possible to connect
+two endpoints directly, using connect() on the active side. This is
+intended to support the newer Nokia Wireless Modem API, as found in
+e.g. the Nokia Slim Modem in the ST-Ericsson U8500 platform:
+
+  struct sockaddr_spn spn;
+  int fd;
+
+  fd = socket(PF_PHONET, SOCK_SEQPACKET, PN_PROTO_PIPE);
+  memset(&spn, 0, sizeof(spn));
+  spn.spn_family = AF_PHONET;
+  spn.spn_obj = ...;
+  spn.spn_dev = ...;
+  spn.spn_resource = 0xD9;
+  connect(fd, (struct sockaddr *)&spn, sizeof(spn));
+  /* normal I/O here ... */
+  close(fd);
+
 
 WARNING:
 When polling a connected pipe socket for writability, there is an
@@ -181,45 +200,9 @@ The pipe protocol provides two socket options at the SOL_PNPIPE level:
     interface index of the network interface created by PNPIPE_ENCAP,
     or zero if encapsulation is off.
 
-
-Phonet Pipe-controller Implementation
--------------------------------------
-
-Phonet Pipe-controller is enabled by selecting the CONFIG_PHONET_PIPECTRLR Kconfig
-option. It is useful when communicating with those Nokia Modems which do not
-implement Pipe controller in them e.g. Nokia Slim Modem used in ST-Ericsson
-U8500 platform.
-
-The implementation is based on the Data Connection Establishment Sequence
-depicted in 'Nokia Wireless Modem API - Wireless_modem_user_guide.pdf'
-document.
-
-It allows a phonet sequenced socket (host-pep) to initiate a Pipe connection
-between itself and a remote pipe-end point (e.g. modem).
-
-The implementation adds socket options at SOL_PNPIPE level:
-
- PNPIPE_PIPE_HANDLE
-	It accepts an integer argument for setting value of pipe handle.
-
-  PNPIPE_ENABLE accepts one integer value (int). If set to zero, the pipe
-    is disabled. If the value is non-zero, the pipe is enabled. If the pipe
-    is not (yet) connected, ENOTCONN is error is returned.
-
-The implementation also adds socket 'connect'. On calling the 'connect', pipe
-will be created between the source socket and the destination, and the pipe
-state will be set to PIPE_DISABLED.
-
-After a pipe has been created and enabled successfully, the Pipe data can be
-exchanged between the host-pep and remote-pep (modem).
-
-User-space would typically follow below sequence with Pipe controller:-
--socket
--bind
--setsockopt for PNPIPE_PIPE_HANDLE
--connect
--setsockopt for PNPIPE_ENCAP_IP
--setsockopt for PNPIPE_ENABLE
+  PNPIPE_HANDLE is a read-only integer value. It contains the underlying
+    identifier ("pipe handle") of the pipe. This is only defined for
+    socket descriptors that are already connected or being connected.
 
 
 Authors

Documentation/power/devices.txt

@@ -1,6 +1,6 @@
 Device Power Management
 
-Copyright (c) 2010 Rafael J. Wysocki <rjw@sisk.pl>, Novell Inc.
+Copyright (c) 2010-2011 Rafael J. Wysocki <rjw@sisk.pl>, Novell Inc.
 Copyright (c) 2010 Alan Stern <stern@rowland.harvard.edu>
 
 
@@ -159,18 +159,18 @@ matter, and the kernel is responsible for keeping track of it.  By contrast,
 whether or not a wakeup-capable device should issue wakeup events is a policy
 decision, and it is managed by user space through a sysfs attribute: the
 power/wakeup file.  User space can write the strings "enabled" or "disabled" to
-set or clear the should_wakeup flag, respectively.  Reads from the file will
-return the corresponding string if can_wakeup is true, but if can_wakeup is
-false then reads will return an empty string, to indicate that the device
-doesn't support wakeup events.  (But even though the file appears empty, writes
-will still affect the should_wakeup flag.)
+set or clear the "should_wakeup" flag, respectively.  This file is only present
+for wakeup-capable devices (i.e. devices whose "can_wakeup" flags are set)
+and is created (or removed) by device_set_wakeup_capable().  Reads from the
+file will return the corresponding string.
 
 The device_may_wakeup() routine returns true only if both flags are set.
-Drivers should check this routine when putting devices in a low-power state
-during a system sleep transition, to see whether or not to enable the devices'
-wakeup mechanisms.  However for runtime power management, wakeup events should
-be enabled whenever the device and driver both support them, regardless of the
-should_wakeup flag.
+This information is used by subsystems, like the PCI bus type code, to see
+whether or not to enable the devices' wakeup mechanisms.  If device wakeup
+mechanisms are enabled or disabled directly by drivers, they also should use
+device_may_wakeup() to decide what to do during a system sleep transition.
+However for runtime power management, wakeup events should be enabled whenever
+the device and driver both support them, regardless of the should_wakeup flag.
 
 
 /sys/devices/.../power/control files
@@ -249,23 +249,18 @@ various phases always run after tasks have been frozen and before they are
 unfrozen.  Furthermore, the *_noirq phases run at a time when IRQ handlers have
 been disabled (except for those marked with the IRQ_WAKEUP flag).
 
-Most phases use bus, type, and class callbacks (that is, methods defined in
-dev->bus->pm, dev->type->pm, and dev->class->pm).  The prepare and complete
-phases are exceptions; they use only bus callbacks.  When multiple callbacks
-are used in a phase, they are invoked in the order: <class, type, bus> during
-power-down transitions and in the opposite order during power-up transitions.
-For example, during the suspend phase the PM core invokes
-
-	dev->class->pm.suspend(dev);
-	dev->type->pm.suspend(dev);
-	dev->bus->pm.suspend(dev);
-
-before moving on to the next device, whereas during the resume phase the core
-invokes
-
-	dev->bus->pm.resume(dev);
-	dev->type->pm.resume(dev);
-	dev->class->pm.resume(dev);
+All phases use bus, type, or class callbacks (that is, methods defined in
+dev->bus->pm, dev->type->pm, or dev->class->pm).  These callbacks are mutually
+exclusive, so if the device type provides a struct dev_pm_ops object pointed to
+by its pm field (i.e. both dev->type and dev->type->pm are defined), the
+callbacks included in that object (i.e. dev->type->pm) will be used.  Otherwise,
+if the class provides a struct dev_pm_ops object pointed to by its pm field
+(i.e. both dev->class and dev->class->pm are defined), the PM core will use the
+callbacks from that object (i.e. dev->class->pm).  Finally, if the pm fields of
+both the device type and class objects are NULL (or those objects do not exist),
+the callbacks provided by the bus (that is, the callbacks from dev->bus->pm)
+will be used (this allows device types to override callbacks provided by bus
+types or classes if necessary).
 
 These callbacks may in turn invoke device- or driver-specific methods stored in
 dev->driver->pm, but they don't have to.
@@ -507,6 +502,49 @@ routines.  Nevertheless, different callback pointers are used in case there is a
 situation where it actually matters.
 
 
+Device Power Domains
+--------------------
+Sometimes devices share reference clocks or other power resources.  In those
+cases it generally is not possible to put devices into low-power states
+individually.  Instead, a set of devices sharing a power resource can be put
+into a low-power state together at the same time by turning off the shared
+power resource.  Of course, they also need to be put into the full-power state
+together, by turning the shared power resource on.  A set of devices with this
+property is often referred to as a power domain.
+
+Support for power domains is provided through the pwr_domain field of struct
+device.  This field is a pointer to an object of type struct dev_power_domain,
+defined in include/linux/pm.h, providing a set of power management callbacks
+analogous to the subsystem-level and device driver callbacks that are executed
+for the given device during all power transitions, in addition to the respective
+subsystem-level callbacks.  Specifically, the power domain "suspend" callbacks
+(i.e. ->runtime_suspend(), ->suspend(), ->freeze(), ->poweroff(), etc.) are
+executed after the analogous subsystem-level callbacks, while the power domain
+"resume" callbacks (i.e. ->runtime_resume(), ->resume(), ->thaw(), ->restore,
+etc.) are executed before the analogous subsystem-level callbacks.  Error codes
+returned by the "suspend" and "resume" power domain callbacks are ignored.
+
+Power domain ->runtime_idle() callback is executed before the subsystem-level
+->runtime_idle() callback and the result returned by it is not ignored.  Namely,
+if it returns error code, the subsystem-level ->runtime_idle() callback will not
+be called and the helper function rpm_idle() executing it will return error
+code.  This mechanism is intended to help platforms where saving device state
+is a time consuming operation and should only be carried out if all devices
+in the power domain are idle, before turning off the shared power resource(s).
+Namely, the power domain ->runtime_idle() callback may return error code until
+the pm_runtime_idle() helper (or its asychronous version) has been called for
+all devices in the power domain (it is recommended that the returned error code
+be -EBUSY in those cases), preventing the subsystem-level ->runtime_idle()
+callback from being run prematurely.
+
+The support for device power domains is only relevant to platforms needing to
+use the same subsystem-level (e.g. platform bus type) and device driver power
+management callbacks in many different power domain configurations and wanting
+to avoid incorporating the support for power domains into the subsystem-level
+callbacks.  The other platforms need not implement it or take it into account
+in any way.
+
+
 System Devices
 --------------
 System devices (sysdevs) follow a slightly different API, which can be found in

Documentation/power/runtime_pm.txt

@@ -1,6 +1,6 @@
 Run-time Power Management Framework for I/O Devices
 
-(C) 2009 Rafael J. Wysocki <rjw@sisk.pl>, Novell Inc.
+(C) 2009-2011 Rafael J. Wysocki <rjw@sisk.pl>, Novell Inc.
 (C) 2010 Alan Stern <stern@rowland.harvard.edu>
 
 1. Introduction
@@ -44,11 +44,12 @@ struct dev_pm_ops {
 };
 
 The ->runtime_suspend(), ->runtime_resume() and ->runtime_idle() callbacks are
-executed by the PM core for either the bus type, or device type (if the bus
-type's callback is not defined), or device class (if the bus type's and device
-type's callbacks are not defined) of given device.  The bus type, device type
-and device class callbacks are referred to as subsystem-level callbacks in what
-follows.
+executed by the PM core for either the device type, or the class (if the device
+type's struct dev_pm_ops object does not exist), or the bus type (if the
+device type's and class' struct dev_pm_ops objects do not exist) of the given
+device (this allows device types to override callbacks provided by bus types or
+classes if necessary).  The bus type, device type and class callbacks are
+referred to as subsystem-level callbacks in what follows.
 
 By default, the callbacks are always invoked in process context with interrupts
 enabled.  However, subsystems can use the pm_runtime_irq_safe() helper function

Documentation/power/states.txt

@@ -62,12 +62,12 @@ setup via another operating system for it to use. Despite the
 inconvenience, this method requires minimal work by the kernel, since
 the firmware will also handle restoring memory contents on resume. 
 
-For suspend-to-disk, a mechanism called swsusp called 'swsusp' (Swap
-Suspend) is used to write memory contents to free swap space.
-swsusp has some restrictive requirements, but should work in most
-cases. Some, albeit outdated, documentation can be found in
-Documentation/power/swsusp.txt. Alternatively, userspace can do most
-of the actual suspend to disk work, see userland-swsusp.txt.
+For suspend-to-disk, a mechanism called 'swsusp' (Swap Suspend) is used
+to write memory contents to free swap space. swsusp has some restrictive
+requirements, but should work in most cases. Some, albeit outdated,
+documentation can be found in Documentation/power/swsusp.txt.
+Alternatively, userspace can do most of the actual suspend to disk work,
+see userland-swsusp.txt.
 
 Once memory state is written to disk, the system may either enter a
 low-power state (like ACPI S4), or it may simply power down. Powering

Documentation/powerpc/00-INDEX

@@ -5,8 +5,6 @@ please mail me.
 
 00-INDEX
 	- this file
-booting-without-of.txt
-	- Booting the Linux/ppc kernel without Open Firmware
 cpu_features.txt
 	- info on how we support a variety of CPUs with minimal compile-time
 	options.
@@ -16,8 +14,6 @@ hvcs.txt
 	- IBM "Hypervisor Virtual Console Server" Installation Guide
 mpc52xx.txt
 	- Linux 2.6.x on MPC52xx family
-mpc52xx-device-tree-bindings.txt
-	- MPC5200 Device Tree Bindings
 sound.txt
 	- info on sound support under Linux/PPC
 zImage_layout.txt

Documentation/rtc.txt

@@ -178,38 +178,29 @@ RTC class framework, but can't be supported by the older driver.
 	setting the longer alarm time and enabling its IRQ using a single
 	request (using the same model as EFI firmware).
 
-    *	RTC_UIE_ON, RTC_UIE_OFF ... if the RTC offers IRQs, it probably
-	also offers update IRQs whenever the "seconds" counter changes.
-	If needed, the RTC framework can emulate this mechanism.
+    *	RTC_UIE_ON, RTC_UIE_OFF ... if the RTC offers IRQs, the RTC framework
+	will emulate this mechanism.
 
-    *	RTC_PIE_ON, RTC_PIE_OFF, RTC_IRQP_SET, RTC_IRQP_READ ... another
-	feature often accessible with an IRQ line is a periodic IRQ, issued
-	at settable frequencies (usually 2^N Hz).
+    *	RTC_PIE_ON, RTC_PIE_OFF, RTC_IRQP_SET, RTC_IRQP_READ ... these icotls
+	are emulated via a kernel hrtimer.
 
 In many cases, the RTC alarm can be a system wake event, used to force
 Linux out of a low power sleep state (or hibernation) back to a fully
 operational state.  For example, a system could enter a deep power saving
 state until it's time to execute some scheduled tasks.
 
-Note that many of these ioctls need not actually be implemented by your
-driver.  The common rtc-dev interface handles many of these nicely if your
-driver returns ENOIOCTLCMD.  Some common examples:
+Note that many of these ioctls are handled by the common rtc-dev interface.
+Some common examples:
 
     *	RTC_RD_TIME, RTC_SET_TIME: the read_time/set_time functions will be
 	called with appropriate values.
 
-    *	RTC_ALM_SET, RTC_ALM_READ, RTC_WKALM_SET, RTC_WKALM_RD: the
-	set_alarm/read_alarm functions will be called.
+    *	RTC_ALM_SET, RTC_ALM_READ, RTC_WKALM_SET, RTC_WKALM_RD: gets or sets
+	the alarm rtc_timer. May call the set_alarm driver function.
 
-    *	RTC_IRQP_SET, RTC_IRQP_READ: the irq_set_freq function will be called
-	to set the frequency while the framework will handle the read for you
-	since the frequency is stored in the irq_freq member of the rtc_device
-	structure.  Your driver needs to initialize the irq_freq member during
-	init.  Make sure you check the requested frequency is in range of your
-	hardware in the irq_set_freq function.  If it isn't, return -EINVAL.  If
-	you cannot actually change the frequency, do not define irq_set_freq.
+    *	RTC_IRQP_SET, RTC_IRQP_READ: These are emulated by the generic code.
 
-    *	RTC_PIE_ON, RTC_PIE_OFF: the irq_set_state function will be called.
+    *	RTC_PIE_ON, RTC_PIE_OFF: These are also emulated by the generic code.
 
 If all else fails, check out the rtc-test.c driver!
 

Documentation/serial/n_gsm.txt

@@ -0,0 +1,89 @@
+n_gsm.c GSM 0710 tty multiplexor HOWTO
+===================================================
+
+This line discipline implements the GSM 07.10 multiplexing protocol
+detailed in the following 3GPP document :
+http://www.3gpp.org/ftp/Specs/archive/07_series/07.10/0710-720.zip
+
+This document give some hints on how to use this driver with GPRS and 3G
+modems connected to a physical serial port.
+
+How to use it
+-------------
+1- initialize the modem in 0710 mux mode (usually AT+CMUX= command) through
+its serial port. Depending on the modem used, you can pass more or less
+parameters to this command,
+2- switch the serial line to using the n_gsm line discipline by using
+TIOCSETD ioctl,
+3- configure the mux using GSMIOC_GETCONF / GSMIOC_SETCONF ioctl,
+
+Major parts of the initialization program :
+(a good starting point is util-linux-ng/sys-utils/ldattach.c)
+#include <linux/gsmmux.h>
+#define N_GSM0710	21	/* GSM 0710 Mux */
+#define DEFAULT_SPEED	B115200
+#define SERIAL_PORT	/dev/ttyS0
+
+	int ldisc = N_GSM0710;
+	struct gsm_config c;
+	struct termios configuration;
+
+	/* open the serial port connected to the modem */
+	fd = open(SERIAL_PORT, O_RDWR | O_NOCTTY | O_NDELAY);
+
+	/* configure the serial port : speed, flow control ... */
+
+	/* send the AT commands to switch the modem to CMUX mode
+	   and check that it's succesful (should return OK) */
+	write(fd, "AT+CMUX=0\r", 10);
+
+	/* experience showed that some modems need some time before
+	   being able to answer to the first MUX packet so a delay
+	   may be needed here in some case */
+	sleep(3);
+
+	/* use n_gsm line discipline */
+	ioctl(fd, TIOCSETD, &ldisc);
+
+	/* get n_gsm configuration */
+	ioctl(fd, GSMIOC_GETCONF, &c);
+	/* we are initiator and need encoding 0 (basic) */
+	c.initiator = 1;
+	c.encapsulation = 0;
+	/* our modem defaults to a maximum size of 127 bytes */
+	c.mru = 127;
+	c.mtu = 127;
+	/* set the new configuration */
+	ioctl(fd, GSMIOC_SETCONF, &c);
+
+	/* and wait for ever to keep the line discipline enabled */
+	daemon(0,0);
+	pause();
+
+4- create the devices corresponding to the "virtual" serial ports (take care,
+each modem has its configuration and some DLC have dedicated functions,
+for example GPS), starting with minor 1 (DLC0 is reserved for the management
+of the mux)
+
+MAJOR=`cat /proc/devices |grep gsmtty | awk '{print $1}`
+for i in `seq 1 4`; do
+	mknod /dev/ttygsm$i c $MAJOR $i
+done
+
+5- use these devices as plain serial ports.
+for example, it's possible :
+- and to use gnokii to send / receive SMS on ttygsm1
+- to use ppp to establish a datalink on ttygsm2
+
+6- first close all virtual ports before closing the physical port.
+
+Additional Documentation
+------------------------
+More practical details on the protocol and how it's supported by industrial
+modems can be found in the following documents :
+http://www.telit.com/module/infopool/download.php?id=616
+http://www.u-blox.com/images/downloads/Product_Docs/LEON-G100-G200-MuxImplementation_ApplicationNote_%28GSM%20G1-CS-10002%29.pdf
+http://www.sierrawireless.com/Support/Downloads/AirPrime/WMP_Series/~/media/Support_Downloads/AirPrime/Application_notes/CMUX_Feature_Application_Note-Rev004.ashx
+http://wm.sim.com/sim/News/photo/2010721161442.pdf
+
+11-03-08 - Eric Bénard - <eric@eukrea.com>

Documentation/spinlocks.txt

@@ -86,7 +86,7 @@ to change the variables it has to get an exclusive write lock.
 
 The routines look the same as above:
 
-   rwlock_t xxx_lock = RW_LOCK_UNLOCKED;
+   rwlock_t xxx_lock = __RW_LOCK_UNLOCKED(xxx_lock);
 
 	unsigned long flags;
 
@@ -196,25 +196,3 @@ appropriate:
 
 For static initialization, use DEFINE_SPINLOCK() / DEFINE_RWLOCK() or
 __SPIN_LOCK_UNLOCKED() / __RW_LOCK_UNLOCKED() as appropriate.
-
-SPIN_LOCK_UNLOCKED and RW_LOCK_UNLOCKED are deprecated.  These interfere
-with lockdep state tracking.
-
-Most of the time, you can simply turn:
-	static spinlock_t xxx_lock = SPIN_LOCK_UNLOCKED;
-into:
-	static DEFINE_SPINLOCK(xxx_lock);
-
-Static structure member variables go from:
-
-	struct foo bar {
-		.lock	=	SPIN_LOCK_UNLOCKED;
-	};
-
-to:
-
-	struct foo bar {
-		.lock	=	__SPIN_LOCK_UNLOCKED(bar.lock);
-	};
-
-Declaration of static rw_locks undergo a similar transformation.

Documentation/sysctl/fs.txt

@@ -88,20 +88,19 @@ you might want to raise the limit.
 
 file-max & file-nr:
 
-The kernel allocates file handles dynamically, but as yet it
-doesn't free them again.
-
 The value in file-max denotes the maximum number of file-
 handles that the Linux kernel will allocate. When you get lots
 of error messages about running out of file handles, you might
 want to increase this limit.
 
-Historically, the three values in file-nr denoted the number of
-allocated file handles, the number of allocated but unused file
-handles, and the maximum number of file handles. Linux 2.6 always
-reports 0 as the number of free file handles -- this is not an
-error, it just means that the number of allocated file handles
-exactly matches the number of used file handles.
+Historically,the kernel was able to allocate file handles
+dynamically, but not to free them again. The three values in
+file-nr denote the number of allocated file handles, the number
+of allocated but unused file handles, and the maximum number of
+file handles. Linux 2.6 always reports 0 as the number of free
+file handles -- this is not an error, it just means that the
+number of allocated file handles exactly matches the number of
+used file handles.
 
 Attempts to allocate more file descriptors than file-max are
 reported with printk, look for "VFS: file-max limit <number>

Documentation/trace/ftrace-design.txt

@@ -247,6 +247,13 @@ You need very few things to get the syscalls tracing in an arch.
 - Support the TIF_SYSCALL_TRACEPOINT thread flags.
 - Put the trace_sys_enter() and trace_sys_exit() tracepoints calls from ptrace
   in the ptrace syscalls tracing path.
+- If the system call table on this arch is more complicated than a simple array
+  of addresses of the system calls, implement an arch_syscall_addr to return
+  the address of a given system call.
+- If the symbol names of the system calls do not match the function names on
+  this arch, define ARCH_HAS_SYSCALL_MATCH_SYM_NAME in asm/ftrace.h and
+  implement arch_syscall_match_sym_name with the appropriate logic to return
+  true if the function name corresponds with the symbol name.
 - Tag this arch as HAVE_SYSCALL_TRACEPOINTS.
 
 

Documentation/trace/ftrace.txt

@@ -80,11 +80,11 @@ of ftrace. Here is a list of some of the key files:
 	tracers listed here can be configured by
 	echoing their name into current_tracer.
 
-  tracing_enabled:
+  tracing_on:
 
-	This sets or displays whether the current_tracer
-	is activated and tracing or not. Echo 0 into this
-	file to disable the tracer or 1 to enable it.
+	This sets or displays whether writing to the trace
+	ring buffer is enabled. Echo 0 into this file to disable
+	the tracer or 1 to enable it.
 
   trace:
 
@@ -202,10 +202,6 @@ Here is the list of current tracers that may be configured.
 	to draw a graph of function calls similar to C code
 	source.
 
-  "sched_switch"
-
-	Traces the context switches and wakeups between tasks.
-
   "irqsoff"
 
 	Traces the areas that disable interrupts and saves
@@ -273,39 +269,6 @@ format, the function name that was traced "path_put" and the
 parent function that called this function "path_walk". The
 timestamp is the time at which the function was entered.
 
-The sched_switch tracer also includes tracing of task wakeups
-and context switches.
-
-     ksoftirqd/1-7     [01]  1453.070013:      7:115:R   +  2916:115:S
-     ksoftirqd/1-7     [01]  1453.070013:      7:115:R   +    10:115:S
-     ksoftirqd/1-7     [01]  1453.070013:      7:115:R ==>    10:115:R
-        events/1-10    [01]  1453.070013:     10:115:S ==>  2916:115:R
-     kondemand/1-2916  [01]  1453.070013:   2916:115:S ==>     7:115:R
-     ksoftirqd/1-7     [01]  1453.070013:      7:115:S ==>     0:140:R
-
-Wake ups are represented by a "+" and the context switches are
-shown as "==>".  The format is:
-
- Context switches:
-
-       Previous task              Next Task
-
-  <pid>:<prio>:<state>  ==>  <pid>:<prio>:<state>
-
- Wake ups:
-
-       Current task               Task waking up
-
-  <pid>:<prio>:<state>    +  <pid>:<prio>:<state>
-
-The prio is the internal kernel priority, which is the inverse
-of the priority that is usually displayed by user-space tools.
-Zero represents the highest priority (99). Prio 100 starts the
-"nice" priorities with 100 being equal to nice -20 and 139 being
-nice 19. The prio "140" is reserved for the idle task which is
-the lowest priority thread (pid 0).
-
-
 Latency trace format
 --------------------
 
@@ -491,78 +454,10 @@ x494] <- /root/a.out[+0x4a8] <- /lib/libc-2.7.so[+0x1e1a6]
                    latencies, as described in "Latency
                    trace format".
 
-sched_switch
-------------
-
-This tracer simply records schedule switches. Here is an example
-of how to use it.
-
- # echo sched_switch > current_tracer
- # echo 1 > tracing_enabled
- # sleep 1
- # echo 0 > tracing_enabled
- # cat trace
-
-# tracer: sched_switch
-#
-#           TASK-PID   CPU#    TIMESTAMP  FUNCTION
-#              | |      |          |         |
-            bash-3997  [01]   240.132281:   3997:120:R   +  4055:120:R
-            bash-3997  [01]   240.132284:   3997:120:R ==>  4055:120:R
-           sleep-4055  [01]   240.132371:   4055:120:S ==>  3997:120:R
-            bash-3997  [01]   240.132454:   3997:120:R   +  4055:120:S
-            bash-3997  [01]   240.132457:   3997:120:R ==>  4055:120:R
-           sleep-4055  [01]   240.132460:   4055:120:D ==>  3997:120:R
-            bash-3997  [01]   240.132463:   3997:120:R   +  4055:120:D
-            bash-3997  [01]   240.132465:   3997:120:R ==>  4055:120:R
-          <idle>-0     [00]   240.132589:      0:140:R   +     4:115:S
-          <idle>-0     [00]   240.132591:      0:140:R ==>     4:115:R
-     ksoftirqd/0-4     [00]   240.132595:      4:115:S ==>     0:140:R
-          <idle>-0     [00]   240.132598:      0:140:R   +     4:115:S
-          <idle>-0     [00]   240.132599:      0:140:R ==>     4:115:R
-     ksoftirqd/0-4     [00]   240.132603:      4:115:S ==>     0:140:R
-           sleep-4055  [01]   240.133058:   4055:120:S ==>  3997:120:R
- [...]
-
-
-As we have discussed previously about this format, the header
-shows the name of the trace and points to the options. The
-"FUNCTION" is a misnomer since here it represents the wake ups
-and context switches.
-
-The sched_switch file only lists the wake ups (represented with
-'+') and context switches ('==>') with the previous task or
-current task first followed by the next task or task waking up.
-The format for both of these is PID:KERNEL-PRIO:TASK-STATE.
-Remember that the KERNEL-PRIO is the inverse of the actual
-priority with zero (0) being the highest priority and the nice
-values starting at 100 (nice -20). Below is a quick chart to map
-the kernel priority to user land priorities.
-
-   Kernel Space                     User Space
- ===============================================================
-   0(high) to  98(low)     user RT priority 99(high) to 1(low)
-                           with SCHED_RR or SCHED_FIFO
- ---------------------------------------------------------------
-  99                       sched_priority is not used in scheduling
-                           decisions(it must be specified as 0)
- ---------------------------------------------------------------
- 100(high) to 139(low)     user nice -20(high) to 19(low)
- ---------------------------------------------------------------
- 140                       idle task priority
- ---------------------------------------------------------------
-
-The task states are:
-
- R - running : wants to run, may not actually be running
- S - sleep   : process is waiting to be woken up (handles signals)
- D - disk sleep (uninterruptible sleep) : process must be woken up
-					(ignores signals)
- T - stopped : process suspended
- t - traced  : process is being traced (with something like gdb)
- Z - zombie  : process waiting to be cleaned up
- X - unknown
-
+  overwrite - This controls what happens when the trace buffer is
+              full. If "1" (default), the oldest events are
+              discarded and overwritten. If "0", then the newest
+              events are discarded.
 
 ftrace_enabled
 --------------
@@ -607,10 +502,10 @@ an example:
  # echo irqsoff > current_tracer
  # echo latency-format > trace_options
  # echo 0 > tracing_max_latency
- # echo 1 > tracing_enabled
+ # echo 1 > tracing_on
  # ls -ltr
  [...]
- # echo 0 > tracing_enabled
+ # echo 0 > tracing_on
  # cat trace
 # tracer: irqsoff
 #
@@ -715,10 +610,10 @@ is much like the irqsoff tracer.
  # echo preemptoff > current_tracer
  # echo latency-format > trace_options
  # echo 0 > tracing_max_latency
- # echo 1 > tracing_enabled
+ # echo 1 > tracing_on
  # ls -ltr
  [...]
- # echo 0 > tracing_enabled
+ # echo 0 > tracing_on
  # cat trace
 # tracer: preemptoff
 #
@@ -863,10 +758,10 @@ tracers.
  # echo preemptirqsoff > current_tracer
  # echo latency-format > trace_options
  # echo 0 > tracing_max_latency
- # echo 1 > tracing_enabled
+ # echo 1 > tracing_on
  # ls -ltr
  [...]
- # echo 0 > tracing_enabled
+ # echo 0 > tracing_on
  # cat trace
 # tracer: preemptirqsoff
 #
@@ -1026,9 +921,9 @@ Instead of performing an 'ls', we will run 'sleep 1' under
  # echo wakeup > current_tracer
  # echo latency-format > trace_options
  # echo 0 > tracing_max_latency
- # echo 1 > tracing_enabled
+ # echo 1 > tracing_on
  # chrt -f 5 sleep 1
- # echo 0 > tracing_enabled
+ # echo 0 > tracing_on
  # cat trace
 # tracer: wakeup
 #
@@ -1140,9 +1035,9 @@ ftrace_enabled is set; otherwise this tracer is a nop.
 
  # sysctl kernel.ftrace_enabled=1
  # echo function > current_tracer
- # echo 1 > tracing_enabled
+ # echo 1 > tracing_on
  # usleep 1
- # echo 0 > tracing_enabled
+ # echo 0 > tracing_on
  # cat trace
 # tracer: function
 #
@@ -1180,7 +1075,7 @@ int trace_fd;
 [...]
 int main(int argc, char *argv[]) {
 	[...]
-	trace_fd = open(tracing_file("tracing_enabled"), O_WRONLY);
+	trace_fd = open(tracing_file("tracing_on"), O_WRONLY);
 	[...]
 	if (condition_hit()) {
 		write(trace_fd, "0", 1);
@@ -1631,9 +1526,9 @@ If I am only interested in sys_nanosleep and hrtimer_interrupt:
  # echo sys_nanosleep hrtimer_interrupt \
 		> set_ftrace_filter
  # echo function > current_tracer
- # echo 1 > tracing_enabled
+ # echo 1 > tracing_on
  # usleep 1
- # echo 0 > tracing_enabled
+ # echo 0 > tracing_on
  # cat trace
 # tracer: ftrace
 #
@@ -1879,9 +1774,9 @@ different. The trace is live.
  # echo function > current_tracer
  # cat trace_pipe > /tmp/trace.out &
 [1] 4153
- # echo 1 > tracing_enabled
+ # echo 1 > tracing_on
  # usleep 1
- # echo 0 > tracing_enabled
+ # echo 0 > tracing_on
  # cat trace
 # tracer: function
 #

Documentation/trace/kprobetrace.txt

@@ -42,11 +42,25 @@ Synopsis of kprobe_events
   +|-offs(FETCHARG) : Fetch memory at FETCHARG +|- offs address.(**)
   NAME=FETCHARG : Set NAME as the argument name of FETCHARG.
   FETCHARG:TYPE : Set TYPE as the type of FETCHARG. Currently, basic types
-		  (u8/u16/u32/u64/s8/s16/s32/s64) and string are supported.
+		  (u8/u16/u32/u64/s8/s16/s32/s64), "string" and bitfield
+		  are supported.
 
   (*) only for return probe.
   (**) this is useful for fetching a field of data structures.
 
+Types
+-----
+Several types are supported for fetch-args. Kprobe tracer will access memory
+by given type. Prefix 's' and 'u' means those types are signed and unsigned
+respectively. Traced arguments are shown in decimal (signed) or hex (unsigned).
+String type is a special type, which fetches a "null-terminated" string from
+kernel space. This means it will fail and store NULL if the string container
+has been paged out.
+Bitfield is another special type, which takes 3 parameters, bit-width, bit-
+offset, and container-size (usually 32). The syntax is;
+
+ b<bit-width>@<bit-offset>/<container-size>
+
 
 Per-Probe Event Filtering
 -------------------------

Documentation/usb/usbmon.txt

@@ -12,6 +12,10 @@ Controller Drivers (HCD). So, if HCD is buggy, the traces reported by
 usbmon may not correspond to bus transactions precisely. This is the same
 situation as with tcpdump.
 
+Two APIs are currently implemented: "text" and "binary". The binary API
+is available through a character device in /dev namespace and is an ABI.
+The text API is deprecated since 2.6.35, but available for convenience.
+
 * How to use usbmon to collect raw text traces
 
 Unlike the packet socket, usbmon has an interface which provides traces
@@ -162,39 +166,11 @@ Here is the list of words, from left to right:
   not machine words, but really just a byte stream split into words to make
   it easier to read. Thus, the last word may contain from one to four bytes.
   The length of collected data is limited and can be less than the data length
-  report in Data Length word.
-
-Here is an example of code to read the data stream in a well known programming
-language:
-
-class ParsedLine {
-	int data_len;		/* Available length of data */
-	byte data[];
-
-	void parseData(StringTokenizer st) {
-		int availwords = st.countTokens();
-		data = new byte[availwords * 4];
-		data_len = 0;
-		while (st.hasMoreTokens()) {
-			String data_str = st.nextToken();
-			int len = data_str.length() / 2;
-			int i;
-			int b;	// byte is signed, apparently?! XXX
-			for (i = 0; i < len; i++) {
-				// data[data_len] = Byte.parseByte(
-				//     data_str.substring(i*2, i*2 + 2),
-				//     16);
-				b = Integer.parseInt(
-				     data_str.substring(i*2, i*2 + 2),
-				     16);
-				if (b >= 128)
-					b *= -1;
-				data[data_len] = (byte) b;
-				data_len++;
-			}
-		}
-	}
-}
+  reported in the Data Length word. In the case of an Isochronous input (Zi)
+  completion where the received data is sparse in the buffer, the length of
+  the collected data can be greater than the Data Length value (because Data
+  Length counts only the bytes that were received whereas the Data words
+  contain the entire transfer buffer).
 
 Examples:
 

Documentation/workqueue.txt

@@ -190,9 +190,9 @@ resources, scheduled and executed.
 	* Long running CPU intensive workloads which can be better
 	  managed by the system scheduler.
 
-  WQ_FREEZEABLE
+  WQ_FREEZABLE
 
-	A freezeable wq participates in the freeze phase of the system
+	A freezable wq participates in the freeze phase of the system
 	suspend operations.  Work items on the wq are drained and no
 	new work item starts execution until thawed.
 

Documentation/zh_CN/SecurityBugs

@@ -0,0 +1,50 @@
+Chinese translated version of Documentation/SecurityBugs
+
+If you have any comment or update to the content, please contact the
+original document maintainer directly.  However, if you have a problem
+communicating in English you can also ask the Chinese maintainer for
+help.  Contact the Chinese maintainer if this translation is outdated
+or if there is a problem with the translation.
+
+Chinese maintainer: Harry Wei <harryxiyou@gmail.com>
+---------------------------------------------------------------------
+Documentation/SecurityBugs 的中文翻译
+
+如果想评论或更新本文的内容，请直接联系原文档的维护者。如果你使用英文
+交流有困难的话，也可以向中文版维护者求助。如果本翻译更新不及时或者翻
+译存在问题，请联系中文版维护者。
+
+中文版维护者： 贾威威 Harry Wei <harryxiyou@gmail.com>
+中文版翻译者： 贾威威 Harry Wei <harryxiyou@gmail.com>
+中文版校译者： 贾威威 Harry Wei <harryxiyou@gmail.com>
+
+
+以下为正文
+---------------------------------------------------------------------
+Linux内核开发者认为安全非常重要。因此，我们想要知道当一个有关于
+安全的漏洞被发现的时候，并且它可能会被尽快的修复或者公开。请把这个安全
+漏洞报告给Linux内核安全团队。
+
+1) 联系
+
+linux内核安全团队可以通过email<security@kernel.org>来联系。这是
+一组独立的安全工作人员，可以帮助改善漏洞报告并且公布和取消一个修复。安
+全团队有可能会从部分的维护者那里引进额外的帮助来了解并且修复安全漏洞。
+当遇到任何漏洞，所能提供的信息越多就越能诊断和修复。如果你不清楚什么
+是有帮助的信息，那就请重温一下REPORTING-BUGS文件中的概述过程。任
+何攻击性的代码都是非常有用的，未经报告者的同意不会被取消，除非它已经
+被公布于众。
+
+2) 公开
+
+Linux内核安全团队的宗旨就是和漏洞提交者一起处理漏洞的解决方案直
+到公开。我们喜欢尽快地完全公开漏洞。当一个漏洞或者修复还没有被完全地理
+解，解决方案没有通过测试或者供应商协调，可以合理地延迟公开。然而，我们
+期望这些延迟尽可能的短些，是可数的几天，而不是几个星期或者几个月。公开
+日期是通过安全团队和漏洞提供者以及供应商洽谈后的结果。公开时间表是从很
+短（特殊的，它已经被公众所知道）到几个星期。作为一个基本的默认政策，我
+们所期望通知公众的日期是7天的安排。
+
+3) 保密协议
+
+Linux内核安全团队不是一个正式的团体，因此不能加入任何的保密协议。

Documentation/zh_CN/SubmitChecklist

@@ -0,0 +1,109 @@
+Chinese translated version of Documentation/SubmitChecklist
+
+If you have any comment or update to the content, please contact the
+original document maintainer directly.  However, if you have a problem
+communicating in English you can also ask the Chinese maintainer for
+help.  Contact the Chinese maintainer if this translation is outdated
+or if there is a problem with the translation.
+
+Chinese maintainer: Harry Wei <harryxiyou@gmail.com>
+---------------------------------------------------------------------
+Documentation/SubmitChecklist 的中文翻译
+
+如果想评论或更新本文的内容，请直接联系原文档的维护者。如果你使用英文
+交流有困难的话，也可以向中文版维护者求助。如果本翻译更新不及时或者翻
+译存在问题，请联系中文版维护者。
+
+中文版维护者： 贾威威 Harry Wei <harryxiyou@gmail.com>
+中文版翻译者： 贾威威 Harry Wei <harryxiyou@gmail.com>
+中文版校译者： 贾威威 Harry Wei <harryxiyou@gmail.com>
+
+
+以下为正文
+---------------------------------------------------------------------
+Linux内核提交清单
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+这里有一些内核开发者应该做的基本事情，如果他们想看到自己的内核补丁提交
+被接受的更快。
+
+这些都是超出Documentation/SubmittingPatches文档里所提供的以及其他
+关于提交Linux内核补丁的说明。
+
+1：如果你使用了一个功能那么就#include定义/声明那个功能的那个文件。
+   不要依靠其他间接引入定义/声明那个功能的头文件。
+
+2：构建简洁适用或者更改CONFIG选项 =y，=m，或者=n。
+   不要有编译警告/错误， 不要有链接警告/错误。
+
+2b：通过 allnoconfig, allmodconfig
+
+2c：当使用 0=builddir 成功地构建
+
+3：通过使用本地交叉编译工具或者其他一些构建产所，在多CPU框架上构建。
+
+4：ppc64 是一个很好的检查交叉编译的框架，因为它往往把‘unsigned long’
+   当64位值来使用。
+
+5：按照Documentation/CodingStyle文件里的详细描述，检查你补丁的整体风格。
+   使用补丁风格检查琐碎的违规(scripts/checkpatch.pl)，审核员优先提交。
+   你应该调整遗留在你补丁中的所有违规。
+
+6：任何更新或者改动CONFIG选项都不能打乱配置菜单。
+
+7：所有的Kconfig选项更新都要有说明文字。
+
+8：已经认真地总结了相关的Kconfig组合。这是很难通过测试做好的--脑力在这里下降。
+
+9：检查具有简洁性。
+
+10：使用'make checkstack'和'make namespacecheck'检查，然后修改所找到的问题。
+    注意：堆栈检查不会明确地出现问题，但是任何的一个函数在堆栈上使用多于512字节
+    都要准备修改。
+
+11：包含kernel-doc到全局内核APIs文件。（不要求静态的函数，但是包含也无所谓。）
+    使用'make htmldocs'或者'make mandocs'来检查kernel-doc，然后修改任何
+    发现的问题。
+
+12：已经通过CONFIG_PREEMPT, CONFIG_DEBUG_PREEMPT,
+    CONFIG_DEBUG_SLAB, CONFIG_DEBUG_PAGEALLOC, CONFIG_DEBUG_MUTEXES,
+    CONFIG_DEBUG_SPINLOCK, CONFIG_DEBUG_SPINLOCK_SLEEP测试，并且同时都
+    使能。
+
+13：已经都构建并且使用或者不使用 CONFIG_SMP 和 CONFIG_PREEMPT测试执行时间。
+
+14：如果补丁影响IO/Disk，等等：已经通过使用或者不使用 CONFIG_LBDAF 测试。
+
+15：所有的codepaths已经行使所有lockdep启用功能。
+
+16：所有的/proc记录更新都要作成文件放在Documentation/目录下。
+
+17：所有的内核启动参数更新都被记录到Documentation/kernel-parameters.txt文件中。
+
+18：所有的模块参数更新都用MODULE_PARM_DESC()记录。
+
+19：所有的用户空间接口更新都被记录到Documentation/ABI/。查看Documentation/ABI/README
+    可以获得更多的信息。改变用户空间接口的补丁应该被邮件抄送给linux-api@vger.kernel.org。
+
+20：检查它是不是都通过`make headers_check'。
+
+21：已经通过至少引入slab和page-allocation失败检查。查看Documentation/fault-injection/。
+
+22：新加入的源码已经通过`gcc -W'（使用"make EXTRA_CFLAGS=-W"）编译。这样将产生很多烦恼，
+    但是对于寻找漏洞很有益处，例如:"warning: comparison between signed and unsigned"。
+
+23：当它被合并到-mm补丁集后再测试，用来确定它是否还和补丁队列中的其他补丁一起工作以及在VM，VFS
+    和其他子系统中各个变化。
+
+24：所有的内存屏障{e.g., barrier(), rmb(), wmb()}需要在源代码中的一个注释来解释他们都是干什么的
+    以及原因。
+
+25：如果有任何输入输出控制的补丁被添加，也要更新Documentation/ioctl/ioctl-number.txt。
+
+26：如果你的更改代码依靠或者使用任何的内核APIs或者与下面的kconfig符号有关系的功能，你就要
+    使用相关的kconfig符号关闭， and/or =m（如果选项提供）[在同一时间不是所用的都启用，仅仅各个或者自由
+    组合他们]：
+
+    CONFIG_SMP, CONFIG_SYSFS, CONFIG_PROC_FS, CONFIG_INPUT, CONFIG_PCI,
+    CONFIG_BLOCK, CONFIG_PM, CONFIG_HOTPLUG, CONFIG_MAGIC_SYSRQ,
+    CONFIG_NET, CONFIG_INET=n (后一个使用 CONFIG_NET=y)

Documentation/zh_CN/SubmittingPatches

@@ -100,7 +100,7 @@ http://userweb.kernel.org/~akpm/stuff/patch-scripts.tar.gz
 
 将改动拆分，逻辑类似的放到同一个补丁文件里。
 
-例如，如果你的改动里同时有bug修正和性能优化，那么把这些改动才分到两个或
+例如，如果你的改动里同时有bug修正和性能优化，那么把这些改动拆分到两个或
 者更多的补丁文件中。如果你的改动包含对API的修改，并且修改了驱动程序来适
 应这些新的API，那么把这些修改分成两个补丁。
 
@@ -230,7 +230,7 @@ pref("mailnews.display.disable_format_flowed_support", true);
 些原因，修正错误，重新提交更新后的改动，是你自己的工作。
 
 Linus不给出任何评论就“丢弃”你的补丁是常见的事情。在系统中这样的事情很
-平常。如果他没有接受你的补丁，也许是由于以下原本：
+平常。如果他没有接受你的补丁，也许是由于以下原因：
 * 你的补丁不能在最新版本的内核上干净的打上。
 * 你的补丁在 linux-kernel 邮件列表中没有得到充分的讨论。
 * 风格问题（参照第2小节）

Documentation/zh_CN/magic-number.txt

@@ -0,0 +1,167 @@
+Chinese translated version of Documentation/magic-number.txt
+
+If you have any comment or update to the content, please post to LKML directly.
+However, if you have problem communicating in English you can also ask the
+Chinese maintainer for help.  Contact the Chinese maintainer, if this
+translation is outdated or there is problem with translation.
+
+Chinese maintainer: Jia Wei Wei <harryxiyou@gmail.com>
+---------------------------------------------------------------------
+Documentation/magic-number.txt的中文翻译
+
+如果想评论或更新本文的内容，请直接发信到LKML。如果你使用英文交流有困难的话，也可
+以向中文版维护者求助。如果本翻译更新不及时或者翻译存在问题，请联系中文版维护者。
+
+中文版维护者： 贾威威 Jia Wei Wei <harryxiyou@gmail.com>
+中文版翻译者： 贾威威 Jia Wei Wei <harryxiyou@gmail.com>
+中文版校译者： 贾威威 Jia Wei Wei <harryxiyou@gmail.com>
+
+以下为正文
+---------------------------------------------------------------------
+这个文件是有关当前使用的魔术值注册表。当你给一个结构添加了一个魔术值，你也应该把这个魔术值添加到这个文件，因为我们最好把用于各种结构的魔术值统一起来。
+
+使用魔术值来保护内核数据结构是一个非常好的主意。这就允许你在运行期检查(a)一个结构是否已经被攻击，或者(b)你已经给一个例行程序通过了一个错误的结构。后一种情况特别地有用---特别是当你通过一个空指针指向结构体的时候。tty源码，例如，经常通过特定驱动使用这种方法并且反复地排列特定方面的结构。
+
+使用魔术值的方法是在结构的开始处声明的，如下：
+
+struct tty_ldisc {
+	int	magic;
+	...
+};
+
+当你以后给内核添加增强功能的时候，请遵守这条规则！这样就会节省数不清的调试时间，特别是一些古怪的情况，例如，数组超出范围并且重新写了超出部分。遵守这个规则，‪这些情况可以被快速地，安全地避免。
+
+		Theodore Ts'o
+		  31 Mar 94
+
+给当前的Linux 2.1.55添加魔术表。
+
+		Michael Chastain
+		<mailto:mec@shout.net>
+		22 Sep 1997
+
+现在应该最新的Linux 2.1.112.因为在特性冻结期间，不能在2.2.x前改变任何东西。这些条目被数域所排序。
+
+		Krzysztof G.Baranowski
+	        <mailto: kgb@knm.org.pl>
+		29 Jul 1998
+
+更新魔术表到Linux 2.5.45。刚好越过特性冻结，但是有可能还会有一些新的魔术值在2.6.x之前融入到内核中。
+
+		Petr Baudis
+		<pasky@ucw.cz>
+		03 Nov 2002
+
+更新魔术表到Linux 2.5.74。
+
+		Fabian Frederick
+                <ffrederick@users.sourceforge.net>
+		09 Jul 2003
+
+魔术名                 地址         结构               所在文件
+===========================================================================
+PG_MAGIC              'P'         pg_{read,write}_hdr include/linux/pg.h
+CMAGIC                0x0111      user              include/linux/a.out.h
+MKISS_DRIVER_MAGIC    0x04bf      mkiss_channel     drivers/net/mkiss.h
+RISCOM8_MAGIC         0x0907      riscom_port       drivers/char/riscom8.h
+SPECIALIX_MAGIC       0x0907      specialix_port    drivers/char/specialix_io8.h
+HDLC_MAGIC            0x239e      n_hdlc            drivers/char/n_hdlc.c
+APM_BIOS_MAGIC        0x4101      apm_user          arch/i386/kernel/apm.c
+CYCLADES_MAGIC        0x4359      cyclades_port     include/linux/cyclades.h
+DB_MAGIC              0x4442      fc_info           drivers/net/iph5526_novram.c
+DL_MAGIC              0x444d      fc_info           drivers/net/iph5526_novram.c
+FASYNC_MAGIC          0x4601      fasync_struct     include/linux/fs.h
+FF_MAGIC              0x4646      fc_info           drivers/net/iph5526_novram.c
+ISICOM_MAGIC          0x4d54      isi_port          include/linux/isicom.h
+PTY_MAGIC             0x5001                        drivers/char/pty.c
+PPP_MAGIC             0x5002      ppp               include/linux/if_pppvar.h
+SERIAL_MAGIC          0x5301      async_struct      include/linux/serial.h
+SSTATE_MAGIC          0x5302      serial_state      include/linux/serial.h
+SLIP_MAGIC            0x5302      slip              drivers/net/slip.h
+STRIP_MAGIC           0x5303      strip             drivers/net/strip.c
+X25_ASY_MAGIC         0x5303      x25_asy           drivers/net/x25_asy.h
+SIXPACK_MAGIC         0x5304      sixpack           drivers/net/hamradio/6pack.h
+AX25_MAGIC            0x5316      ax_disp           drivers/net/mkiss.h
+ESP_MAGIC             0x53ee      esp_struct        drivers/char/esp.h
+TTY_MAGIC             0x5401      tty_struct        include/linux/tty.h
+MGSL_MAGIC            0x5401      mgsl_info         drivers/char/synclink.c
+TTY_DRIVER_MAGIC      0x5402      tty_driver        include/linux/tty_driver.h
+MGSLPC_MAGIC          0x5402      mgslpc_info       drivers/char/pcmcia/synclink_cs.c
+TTY_LDISC_MAGIC       0x5403      tty_ldisc         include/linux/tty_ldisc.h
+USB_SERIAL_MAGIC      0x6702      usb_serial        drivers/usb/serial/usb-serial.h
+FULL_DUPLEX_MAGIC     0x6969                        drivers/net/tulip/de2104x.c
+USB_BLUETOOTH_MAGIC   0x6d02      usb_bluetooth     drivers/usb/class/bluetty.c
+RFCOMM_TTY_MAGIC      0x6d02                        net/bluetooth/rfcomm/tty.c
+USB_SERIAL_PORT_MAGIC 0x7301      usb_serial_port   drivers/usb/serial/usb-serial.h
+CG_MAGIC              0x00090255  ufs_cylinder_group include/linux/ufs_fs.h
+A2232_MAGIC           0x000a2232  gs_port           drivers/char/ser_a2232.h
+RPORT_MAGIC           0x00525001  r_port            drivers/char/rocket_int.h
+LSEMAGIC              0x05091998  lse               drivers/fc4/fc.c
+GDTIOCTL_MAGIC        0x06030f07  gdth_iowr_str     drivers/scsi/gdth_ioctl.h
+RIEBL_MAGIC           0x09051990                    drivers/net/atarilance.c
+RIO_MAGIC             0x12345678  gs_port           drivers/char/rio/rio_linux.c
+SX_MAGIC              0x12345678  gs_port           drivers/char/sx.h
+NBD_REQUEST_MAGIC     0x12560953  nbd_request       include/linux/nbd.h
+RED_MAGIC2            0x170fc2a5  (any)             mm/slab.c
+BAYCOM_MAGIC          0x19730510  baycom_state      drivers/net/baycom_epp.c
+ISDN_X25IFACE_MAGIC   0x1e75a2b9  isdn_x25iface_proto_data
+                                                    drivers/isdn/isdn_x25iface.h
+ECP_MAGIC             0x21504345  cdkecpsig         include/linux/cdk.h
+LSOMAGIC              0x27091997  lso               drivers/fc4/fc.c
+LSMAGIC               0x2a3b4d2a  ls                drivers/fc4/fc.c
+WANPIPE_MAGIC         0x414C4453  sdla_{dump,exec}  include/linux/wanpipe.h
+CS_CARD_MAGIC         0x43525553  cs_card           sound/oss/cs46xx.c
+LABELCL_MAGIC         0x4857434c  labelcl_info_s    include/asm/ia64/sn/labelcl.h
+ISDN_ASYNC_MAGIC      0x49344C01  modem_info        include/linux/isdn.h
+CTC_ASYNC_MAGIC       0x49344C01  ctc_tty_info      drivers/s390/net/ctctty.c
+ISDN_NET_MAGIC        0x49344C02  isdn_net_local_s  drivers/isdn/i4l/isdn_net_lib.h
+SAVEKMSG_MAGIC2       0x4B4D5347  savekmsg          arch/*/amiga/config.c
+STLI_BOARDMAGIC       0x4bc6c825  stlibrd           include/linux/istallion.h
+CS_STATE_MAGIC        0x4c4f4749  cs_state          sound/oss/cs46xx.c
+SLAB_C_MAGIC          0x4f17a36d  kmem_cache        mm/slab.c
+COW_MAGIC             0x4f4f4f4d  cow_header_v1     arch/um/drivers/ubd_user.c
+I810_CARD_MAGIC       0x5072696E  i810_card         sound/oss/i810_audio.c
+TRIDENT_CARD_MAGIC    0x5072696E  trident_card      sound/oss/trident.c
+ROUTER_MAGIC          0x524d4157  wan_device        include/linux/wanrouter.h
+SCC_MAGIC             0x52696368  gs_port           drivers/char/scc.h
+SAVEKMSG_MAGIC1       0x53415645  savekmsg          arch/*/amiga/config.c
+GDA_MAGIC             0x58464552  gda               arch/mips/include/asm/sn/gda.h
+RED_MAGIC1            0x5a2cf071  (any)             mm/slab.c
+STL_PORTMAGIC         0x5a7182c9  stlport           include/linux/stallion.h
+EEPROM_MAGIC_VALUE    0x5ab478d2  lanai_dev         drivers/atm/lanai.c
+HDLCDRV_MAGIC         0x5ac6e778  hdlcdrv_state     include/linux/hdlcdrv.h
+EPCA_MAGIC            0x5c6df104  channel           include/linux/epca.h
+PCXX_MAGIC            0x5c6df104  channel           drivers/char/pcxx.h
+KV_MAGIC              0x5f4b565f  kernel_vars_s     arch/mips/include/asm/sn/klkernvars.h
+I810_STATE_MAGIC      0x63657373  i810_state        sound/oss/i810_audio.c
+TRIDENT_STATE_MAGIC   0x63657373  trient_state      sound/oss/trident.c
+M3_CARD_MAGIC         0x646e6f50  m3_card           sound/oss/maestro3.c
+FW_HEADER_MAGIC       0x65726F66  fw_header         drivers/atm/fore200e.h
+SLOT_MAGIC            0x67267321  slot              drivers/hotplug/cpqphp.h
+SLOT_MAGIC            0x67267322  slot              drivers/hotplug/acpiphp.h
+LO_MAGIC              0x68797548  nbd_device        include/linux/nbd.h
+OPROFILE_MAGIC        0x6f70726f  super_block       drivers/oprofile/oprofilefs.h
+M3_STATE_MAGIC        0x734d724d  m3_state          sound/oss/maestro3.c
+STL_PANELMAGIC        0x7ef621a1  stlpanel          include/linux/stallion.h
+VMALLOC_MAGIC         0x87654320  snd_alloc_track   sound/core/memory.c
+KMALLOC_MAGIC         0x87654321  snd_alloc_track   sound/core/memory.c
+PWC_MAGIC             0x89DC10AB  pwc_device        drivers/usb/media/pwc.h
+NBD_REPLY_MAGIC       0x96744668  nbd_reply         include/linux/nbd.h
+STL_BOARDMAGIC        0xa2267f52  stlbrd            include/linux/stallion.h
+ENI155_MAGIC          0xa54b872d  midway_eprom	    drivers/atm/eni.h
+SCI_MAGIC             0xbabeface  gs_port           drivers/char/sh-sci.h
+CODA_MAGIC            0xC0DAC0DA  coda_file_info    include/linux/coda_fs_i.h
+DPMEM_MAGIC           0xc0ffee11  gdt_pci_sram      drivers/scsi/gdth.h
+STLI_PORTMAGIC        0xe671c7a1  stliport          include/linux/istallion.h
+YAM_MAGIC             0xF10A7654  yam_port          drivers/net/hamradio/yam.c
+CCB_MAGIC             0xf2691ad2  ccb               drivers/scsi/ncr53c8xx.c
+QUEUE_MAGIC_FREE      0xf7e1c9a3  queue_entry       drivers/scsi/arm/queue.c
+QUEUE_MAGIC_USED      0xf7e1cc33  queue_entry       drivers/scsi/arm/queue.c
+HTB_CMAGIC            0xFEFAFEF1  htb_class         net/sched/sch_htb.c
+NMI_MAGIC             0x48414d4d455201 nmi_s        arch/mips/include/asm/sn/nmi.h
+
+请注意，在声音记忆管理中仍然有每一些被定义的驱动魔术值。查看include/sound/sndmagic.h来获取他们完整的列表信息。很多OSS声音驱动拥有自己从声卡PCI ID构建的魔术值-他们也没有被列在这里。
+
+IrDA子系统也使用了大量的自己的魔术值，查看include/net/irda/irda.h来获取他们完整的信息。
+
+HFS是另外一个比较大的使用魔术值的文件系统-你可以在fs/hfs/hfs.h中找到他们。

MAINTAINERS

@@ -465,6 +465,16 @@ M:	Matt Turner <mattst88@gmail.com>
 L:	linux-alpha@vger.kernel.org
 F:	arch/alpha/
 
+ALTERA UART/JTAG UART SERIAL DRIVERS
+M:	Tobias Klauser <tklauser@distanz.ch>
+L:	linux-serial@vger.kernel.org
+L:	nios2-dev@sopc.et.ntust.edu.tw (moderated for non-subscribers)
+S:	Maintained
+F:	drivers/tty/serial/altera_uart.c
+F:	drivers/tty/serial/altera_jtaguart.c
+F:	include/linux/altera_uart.h
+F:	include/linux/altera_jtaguart.h
+
 AMD GEODE CS5536 USB DEVICE CONTROLLER DRIVER
 M:	Thomas Dahlmann <dahlmann.thomas@arcor.de>
 L:	linux-geode@lists.infradead.org (moderated for non-subscribers)
@@ -557,6 +567,13 @@ S:	Maintained
 F:	drivers/net/appletalk/
 F:	net/appletalk/
 
+ARASAN COMPACT FLASH PATA CONTROLLER
+M:	Viresh Kumar <viresh.kumar@st.com>
+L:	linux-ide@vger.kernel.org
+S:	Maintained
+F:	include/linux/pata_arasan_cf_data.h
+F:	drivers/ata/pata_arasan_cf.c
+
 ARC FRAMEBUFFER DRIVER
 M:	Jaya Kumar <jayalk@intworks.biz>
 S:	Maintained
@@ -885,7 +902,7 @@ S:	Supported
 
 ARM/QUALCOMM MSM MACHINE SUPPORT
 M:	David Brown <davidb@codeaurora.org>
-M:	Daniel Walker <dwalker@codeaurora.org>
+M:	Daniel Walker <dwalker@fifo99.com>
 M:	Bryan Huntsman <bryanh@codeaurora.org>
 L:	linux-arm-msm@vger.kernel.org
 F:	arch/arm/mach-msm/
@@ -1010,6 +1027,15 @@ L:	linux-samsung-soc@vger.kernel.org (moderated for non-subscribers)
 S:	Maintained
 F:	arch/arm/mach-s5p*/
 
+ARM/SAMSUNG MOBILE MACHINE SUPPORT
+M:	Kyungmin Park <kyungmin.park@samsung.com>
+L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S:	Maintained
+F:	arch/arm/mach-s5pv210/mach-aquila.c
+F:	arch/arm/mach-s5pv210/mach-goni.c
+F:	arch/arm/mach-exynos4/mach-universal_c210.c
+F:	arch/arm/mach-exynos4/mach-nuri.c
+
 ARM/SAMSUNG S5P SERIES FIMC SUPPORT
 M:	Kyungmin Park <kyungmin.park@samsung.com>
 M:	Sylwester Nawrocki <s.nawrocki@samsung.com>
@@ -1205,7 +1231,7 @@ ATHEROS AR9170 WIRELESS DRIVER
 M:	Christian Lamparter <chunkeey@web.de>
 L:	linux-wireless@vger.kernel.org
 W:	http://wireless.kernel.org/en/users/Drivers/ar9170
-S:	Maintained
+S:	Obsolete
 F:	drivers/net/wireless/ath/ar9170/
 
 CARL9170 LINUX COMMUNITY WIRELESS DRIVER
@@ -1467,6 +1493,7 @@ F:	include/net/bluetooth/
 
 BONDING DRIVER
 M:	Jay Vosburgh <fubar@us.ibm.com>
+M:	Andy Gospodarek <andy@greyhouse.net>
 L:	netdev@vger.kernel.org
 W:	http://sourceforge.net/projects/bonding/
 S:	Supported
@@ -1692,7 +1719,15 @@ M:	Andy Whitcroft <apw@canonical.com>
 S:	Supported
 F:	scripts/checkpatch.pl
 
+CHINESE DOCUMENTATION
+M:	Harry Wei <harryxiyou@gmail.com>
+L:	xiyoulinuxkernelgroup@googlegroups.com
+L:	linux-kernel@zh-kernel.org (moderated for non-subscribers)
+S:	Maintained
+F:	Documentation/zh_CN/
+
 CISCO VIC ETHERNET NIC DRIVER
+M:	Christian Benvenuti <benve@cisco.com>
 M:	Vasanthy Kolluri <vkolluri@cisco.com>
 M:	Roopa Prabhu <roprabhu@cisco.com>
 M:	David Wang <dwang2@cisco.com>
@@ -2026,7 +2061,7 @@ F:	Documentation/scsi/dc395x.txt
 F:	drivers/scsi/dc395x.*
 
 DCCP PROTOCOL
-M:	Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
+M:	Gerrit Renker <gerrit@erg.abdn.ac.uk>
 L:	dccp@vger.kernel.org
 W:	http://www.linuxfoundation.org/collaborate/workgroups/networking/dccp
 S:	Maintained
@@ -2126,6 +2161,7 @@ S:	Supported
 F:	fs/dlm/
 
 DMA GENERIC OFFLOAD ENGINE SUBSYSTEM
+M:	Vinod Koul <vinod.koul@intel.com>
 M:	Dan Williams <dan.j.williams@intel.com>
 S:	Supported
 F:	drivers/dma/
@@ -2808,7 +2844,7 @@ F:	mm/hwpoison-inject.c
 HYPERVISOR VIRTUAL CONSOLE DRIVER
 L:	linuxppc-dev@lists.ozlabs.org
 S:	Odd Fixes
-F:	drivers/char/hvc_*
+F:	drivers/tty/hvc/
 
 iSCSI BOOT FIRMWARE TABLE (iBFT) DRIVER
 M:	Peter Jones <pjones@redhat.com>
@@ -2872,7 +2908,6 @@ M:	Guenter Roeck <guenter.roeck@ericsson.com>
 L:	lm-sensors@lm-sensors.org
 W:	http://www.lm-sensors.org/
 T:	quilt kernel.org/pub/linux/kernel/people/jdelvare/linux-2.6/jdelvare-hwmon/
-T:	quilt kernel.org/pub/linux/kernel/people/groeck/linux-staging/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging.git
 S:	Maintained
 F:	Documentation/hwmon/
@@ -3424,7 +3459,7 @@ M:	Jiri Kosina <jkosina@suse.cz>
 M:	David Sterba <dsterba@suse.cz>
 S:	Maintained
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jikos/ipwireless_cs.git
-F:	drivers/char/pcmcia/ipwireless/
+F:	drivers/tty/ipwireless/
 
 IPX NETWORK LAYER
 M:	Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
@@ -3512,7 +3547,7 @@ F:	drivers/hwmon/jc42.c
 F:	Documentation/hwmon/jc42
 
 JFS FILESYSTEM
-M:	Dave Kleikamp <shaggy@linux.vnet.ibm.com>
+M:	Dave Kleikamp <shaggy@kernel.org>
 L:	jfs-discussion@lists.sourceforge.net
 W:	http://jfs.sourceforge.net/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/shaggy/jfs-2.6.git
@@ -3579,12 +3614,6 @@ W:	http://lse.sourceforge.net/kdump/
 S:	Maintained
 F:	Documentation/kdump/
 
-KERNEL AUTOMOUNTER (AUTOFS)
-M:	"H. Peter Anvin" <hpa@zytor.com>
-L:	autofs@linux.kernel.org
-S:	Obsolete
-F:	drivers/staging/autofs/
-
 KERNEL AUTOMOUNTER v4 (AUTOFS4)
 M:	Ian Kent <raven@themaw.net>
 L:	autofs@linux.kernel.org
@@ -4275,10 +4304,7 @@ S:	Maintained
 F:	net/sched/sch_netem.c
 
 NETERION 10GbE DRIVERS (s2io/vxge)
-M:	Ramkrishna Vepa <ramkrishna.vepa@exar.com>
-M:	Sivakumar Subramani <sivakumar.subramani@exar.com>
-M:	Sreenivasa Honnur <sreenivasa.honnur@exar.com>
-M:	Jon Mason <jon.mason@exar.com>
+M:	Jon Mason <jdmason@kudzu.us>
 L:	netdev@vger.kernel.org
 W:	http://trac.neterion.com/cgi-bin/trac.cgi/wiki/Linux?Anonymous
 W:	http://trac.neterion.com/cgi-bin/trac.cgi/wiki/X3100Linux?Anonymous
@@ -5144,6 +5170,7 @@ RALINK RT2X00 WIRELESS LAN DRIVER
 P:	rt2x00 project
 M:	Ivo van Doorn <IvDoorn@gmail.com>
 M:	Gertjan van Wingerde <gwingerde@gmail.com>
+M:	Helmut Schaa <helmut.schaa@googlemail.com>
 L:	linux-wireless@vger.kernel.org
 L:	users@rt2x00.serialmonkey.com (moderated for non-subscribers)
 W:	http://rt2x00.serialmonkey.com/
@@ -5164,6 +5191,7 @@ F:	drivers/char/random.c
 
 RAPIDIO SUBSYSTEM
 M:	Matt Porter <mporter@kernel.crashing.org>
+M:	Alexandre Bounine <alexandre.bounine@idt.com>
 S:	Maintained
 F:	drivers/rapidio/
 
@@ -5266,7 +5294,7 @@ S:	Maintained
 F:	drivers/net/wireless/rtl818x/rtl8180/
 
 RTL8187 WIRELESS DRIVER
-M:	Herton Ronaldo Krzesinski <herton@mandriva.com.br>
+M:	Herton Ronaldo Krzesinski <herton@canonical.com>
 M:	Hin-Tak Leung <htl10@users.sourceforge.net>
 M:	Larry Finger <Larry.Finger@lwfinger.net>
 L:	linux-wireless@vger.kernel.org
@@ -6066,13 +6094,11 @@ F:	sound/soc/codecs/twl4030*
 TIPC NETWORK LAYER
 M:	Jon Maloy <jon.maloy@ericsson.com>
 M:	Allan Stephens <allan.stephens@windriver.com>
-L:	tipc-discussion@lists.sourceforge.net
+L:	netdev@vger.kernel.org (core kernel code)
+L:	tipc-discussion@lists.sourceforge.net (user apps, general discussion)
 W:	http://tipc.sourceforge.net/
-W:	http://tipc.cslab.ericsson.net/
-T:	git git://tipc.cslab.ericsson.net/pub/git/tipc.git
 S:	Maintained
 F:	include/linux/tipc*.h
-F:	include/net/tipc/
 F:	net/tipc/
 
 TILE ARCHITECTURE
@@ -6080,7 +6106,7 @@ M:	Chris Metcalf <cmetcalf@tilera.com>
 W:	http://www.tilera.com/scm/
 S:	Supported
 F:	arch/tile/
-F:	drivers/char/hvc_tile.c
+F:	drivers/tty/hvc/hvc_tile.c
 F:	drivers/net/tile/
 
 TLAN NETWORK DRIVER
@@ -6104,7 +6130,7 @@ S:	Maintained
 F:	security/tomoyo/
 
 TOPSTAR LAPTOP EXTRAS DRIVER
-M:	Herton Ronaldo Krzesinski <herton@mandriva.com.br>
+M:	Herton Ronaldo Krzesinski <herton@canonical.com>
 L:	platform-driver-x86@vger.kernel.org
 S:	Maintained
 F:	drivers/platform/x86/topstar-laptop.c

Makefile

@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 38
-EXTRAVERSION = -rc4
+EXTRAVERSION =
 NAME = Flesh-Eating Bats with Fangs
 
 # *DOCUMENTATION*

arch/alpha/Kconfig

@@ -11,6 +11,7 @@ config ALPHA
 	select HAVE_GENERIC_HARDIRQS
 	select GENERIC_IRQ_PROBE
 	select AUTO_IRQ_AFFINITY if SMP
+	select GENERIC_HARDIRQS_NO_DEPRECATED
 	help
 	  The Alpha is a 64-bit general-purpose processor designed and
 	  marketed by the Digital Equipment Corporation of blessed memory,

arch/alpha/include/asm/fcntl.h

@@ -31,6 +31,8 @@
 #define __O_SYNC	020000000
 #define O_SYNC		(__O_SYNC|O_DSYNC)
 
+#define O_PATH		040000000
+
 #define F_GETLK		7
 #define F_SETLK		8
 #define F_SETLKW	9

arch/alpha/include/asm/futex.h

@@ -29,7 +29,7 @@
 	:	"r" (uaddr), "r"(oparg)				\
 	:	"memory")
 
-static inline int futex_atomic_op_inuser (int encoded_op, int __user *uaddr)
+static inline int futex_atomic_op_inuser (int encoded_op, u32 __user *uaddr)
 {
 	int op = (encoded_op >> 28) & 7;
 	int cmp = (encoded_op >> 24) & 15;
@@ -39,7 +39,7 @@ static inline int futex_atomic_op_inuser (int encoded_op, int __user *uaddr)
 	if (encoded_op & (FUTEX_OP_OPARG_SHIFT << 28))
 		oparg = 1 << oparg;
 
-	if (!access_ok(VERIFY_WRITE, uaddr, sizeof(int)))
+	if (!access_ok(VERIFY_WRITE, uaddr, sizeof(u32)))
 		return -EFAULT;
 
 	pagefault_disable();
@@ -81,21 +81,23 @@ static inline int futex_atomic_op_inuser (int encoded_op, int __user *uaddr)
 }
 
 static inline int
-futex_atomic_cmpxchg_inatomic(int __user *uaddr, int oldval, int newval)
+futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr,
+			      u32 oldval, u32 newval)
 {
-	int prev, cmp;
+	int ret = 0, cmp;
+	u32 prev;
 
-	if (!access_ok(VERIFY_WRITE, uaddr, sizeof(int)))
+	if (!access_ok(VERIFY_WRITE, uaddr, sizeof(u32)))
 		return -EFAULT;
 
 	__asm__ __volatile__ (
 		__ASM_SMP_MB
-	"1:	ldl_l	%0,0(%2)\n"
-	"	cmpeq	%0,%3,%1\n"
-	"	beq	%1,3f\n"
-	"	mov	%4,%1\n"
-	"2:	stl_c	%1,0(%2)\n"
-	"	beq	%1,4f\n"
+	"1:	ldl_l	%1,0(%3)\n"
+	"	cmpeq	%1,%4,%2\n"
+	"	beq	%2,3f\n"
+	"	mov	%5,%2\n"
+	"2:	stl_c	%2,0(%3)\n"
+	"	beq	%2,4f\n"
 	"3:	.subsection 2\n"
 	"4:	br	1b\n"
 	"	.previous\n"
@@ -105,11 +107,12 @@ futex_atomic_cmpxchg_inatomic(int __user *uaddr, int oldval, int newval)
 	"	.long	2b-.\n"
 	"	lda	$31,3b-2b(%0)\n"
 	"	.previous\n"
-	:	"=&r"(prev), "=&r"(cmp)
+	:	"+r"(ret), "=&r"(prev), "=&r"(cmp)
 	:	"r"(uaddr), "r"((long)oldval), "r"(newval)
 	:	"memory");
 
-	return prev;
+	*uval = prev;
+	return ret;
 }
 
 #endif /* __KERNEL__ */

arch/alpha/include/asm/ioctls.h

@@ -94,6 +94,7 @@
 #define TIOCSPTLCK	_IOW('T',0x31, int)  /* Lock/unlock Pty */
 #define TIOCGDEV	_IOR('T',0x32, unsigned int) /* Get primary device node of /dev/console */
 #define TIOCSIG		_IOW('T',0x36, int)  /* Generate signal on Pty slave */
+#define TIOCVHANGUP	0x5437
 
 #define TIOCSERCONFIG	0x5453
 #define TIOCSERGWILD	0x5454

arch/alpha/include/asm/rwsem.h

@@ -13,44 +13,13 @@
 #ifdef __KERNEL__
 
 #include <linux/compiler.h>
-#include <linux/list.h>
-#include <linux/spinlock.h>
 
-struct rwsem_waiter;
-
-extern struct rw_semaphore *rwsem_down_read_failed(struct rw_semaphore *sem);
-extern struct rw_semaphore *rwsem_down_write_failed(struct rw_semaphore *sem);
-extern struct rw_semaphore *rwsem_wake(struct rw_semaphore *);
-extern struct rw_semaphore *rwsem_downgrade_wake(struct rw_semaphore *sem);
-
-/*
- * the semaphore definition
- */
-struct rw_semaphore {
-	long			count;
 #define RWSEM_UNLOCKED_VALUE		0x0000000000000000L
 #define RWSEM_ACTIVE_BIAS		0x0000000000000001L
 #define RWSEM_ACTIVE_MASK		0x00000000ffffffffL
 #define RWSEM_WAITING_BIAS		(-0x0000000100000000L)
 #define RWSEM_ACTIVE_READ_BIAS		RWSEM_ACTIVE_BIAS
 #define RWSEM_ACTIVE_WRITE_BIAS		(RWSEM_WAITING_BIAS + RWSEM_ACTIVE_BIAS)
-	spinlock_t		wait_lock;
-	struct list_head	wait_list;
-};
-
-#define __RWSEM_INITIALIZER(name) \
-	{ RWSEM_UNLOCKED_VALUE, SPIN_LOCK_UNLOCKED, \
-	LIST_HEAD_INIT((name).wait_list) }
-
-#define DECLARE_RWSEM(name) \
-	struct rw_semaphore name = __RWSEM_INITIALIZER(name)
-
-static inline void init_rwsem(struct rw_semaphore *sem)
-{
-	sem->count = RWSEM_UNLOCKED_VALUE;
-	spin_lock_init(&sem->wait_lock);
-	INIT_LIST_HEAD(&sem->wait_list);
-}
 
 static inline void __down_read(struct rw_semaphore *sem)
 {
@@ -250,10 +219,5 @@ static inline long rwsem_atomic_update(long val, struct rw_semaphore *sem)
 #endif
 }
 
-static inline int rwsem_is_locked(struct rw_semaphore *sem)
-{
-	return (sem->count != 0);
-}
-
 #endif /* __KERNEL__ */
 #endif /* _ALPHA_RWSEM_H */

arch/alpha/kernel/irq.c

@@ -44,11 +44,16 @@ static char irq_user_affinity[NR_IRQS];
 
 int irq_select_affinity(unsigned int irq)
 {
-	struct irq_desc *desc = irq_to_desc[irq];
+	struct irq_data *data = irq_get_irq_data(irq);
+	struct irq_chip *chip;
 	static int last_cpu;
 	int cpu = last_cpu + 1;
 
-	if (!desc || !get_irq_desc_chip(desc)->set_affinity || irq_user_affinity[irq])
+	if (!data)
+		return 1;
+	chip = irq_data_get_irq_chip(data);
+
+	if (!chip->irq_set_affinity || irq_user_affinity[irq])
 		return 1;
 
 	while (!cpu_possible(cpu) ||
@@ -56,8 +61,8 @@ int irq_select_affinity(unsigned int irq)
 		cpu = (cpu < (NR_CPUS-1) ? cpu + 1 : 0);
 	last_cpu = cpu;
 
-	cpumask_copy(desc->affinity, cpumask_of(cpu));
-	get_irq_desc_chip(desc)->set_affinity(irq, cpumask_of(cpu));
+	cpumask_copy(data->affinity, cpumask_of(cpu));
+	chip->irq_set_affinity(data, cpumask_of(cpu), false);
 	return 0;
 }
 #endif /* CONFIG_SMP */

arch/alpha/kernel/irq_alpha.c

@@ -228,14 +228,9 @@ struct irqaction timer_irqaction = {
 void __init
 init_rtc_irq(void)
 {
-	struct irq_desc *desc = irq_to_desc(RTC_IRQ);
-
-	if (desc) {
-		desc->status |= IRQ_DISABLED;
-		set_irq_chip_and_handler_name(RTC_IRQ, &no_irq_chip,
-			handle_simple_irq, "RTC");
-		setup_irq(RTC_IRQ, &timer_irqaction);
-	}
+	set_irq_chip_and_handler_name(RTC_IRQ, &no_irq_chip,
+				      handle_simple_irq, "RTC");
+	setup_irq(RTC_IRQ, &timer_irqaction);
 }
 
 /* Dummy irqactions.  */

arch/alpha/kernel/irq_i8259.c

@@ -33,10 +33,10 @@ i8259_update_irq_hw(unsigned int irq, unsigned long mask)
 }
 
 inline void
-i8259a_enable_irq(unsigned int irq)
+i8259a_enable_irq(struct irq_data *d)
 {
 	spin_lock(&i8259_irq_lock);
-	i8259_update_irq_hw(irq, cached_irq_mask &= ~(1 << irq));
+	i8259_update_irq_hw(d->irq, cached_irq_mask &= ~(1 << d->irq));
 	spin_unlock(&i8259_irq_lock);
 }
 
@@ -47,16 +47,18 @@ __i8259a_disable_irq(unsigned int irq)
 }
 
 void
-i8259a_disable_irq(unsigned int irq)
+i8259a_disable_irq(struct irq_data *d)
 {
 	spin_lock(&i8259_irq_lock);
-	__i8259a_disable_irq(irq);
+	__i8259a_disable_irq(d->irq);
 	spin_unlock(&i8259_irq_lock);
 }
 
 void
-i8259a_mask_and_ack_irq(unsigned int irq)
+i8259a_mask_and_ack_irq(struct irq_data *d)
 {
+	unsigned int irq = d->irq;
+
 	spin_lock(&i8259_irq_lock);
 	__i8259a_disable_irq(irq);
 
@@ -71,9 +73,9 @@ i8259a_mask_and_ack_irq(unsigned int irq)
 
 struct irq_chip i8259a_irq_type = {
 	.name		= "XT-PIC",
-	.unmask		= i8259a_enable_irq,
-	.mask		= i8259a_disable_irq,
-	.mask_ack	= i8259a_mask_and_ack_irq,
+	.irq_unmask	= i8259a_enable_irq,
+	.irq_mask	= i8259a_disable_irq,
+	.irq_mask_ack	= i8259a_mask_and_ack_irq,
 };
 
 void __init

arch/alpha/kernel/irq_impl.h

@@ -31,11 +31,9 @@ extern void init_rtc_irq(void);
 
 extern void common_init_isa_dma(void);
 
-extern void i8259a_enable_irq(unsigned int);
-extern void i8259a_disable_irq(unsigned int);
-extern void i8259a_mask_and_ack_irq(unsigned int);
-extern unsigned int i8259a_startup_irq(unsigned int);
-extern void i8259a_end_irq(unsigned int);
+extern void i8259a_enable_irq(struct irq_data *d);
+extern void i8259a_disable_irq(struct irq_data *d);
+extern void i8259a_mask_and_ack_irq(struct irq_data *d);
 extern struct irq_chip i8259a_irq_type;
 extern void init_i8259a_irqs(void);
 

arch/alpha/kernel/irq_pyxis.c

@@ -29,21 +29,21 @@ pyxis_update_irq_hw(unsigned long mask)
 }
 
 static inline void
-pyxis_enable_irq(unsigned int irq)
+pyxis_enable_irq(struct irq_data *d)
 {
-	pyxis_update_irq_hw(cached_irq_mask |= 1UL << (irq - 16));
+	pyxis_update_irq_hw(cached_irq_mask |= 1UL << (d->irq - 16));
 }
 
 static void
-pyxis_disable_irq(unsigned int irq)
+pyxis_disable_irq(struct irq_data *d)
 {
-	pyxis_update_irq_hw(cached_irq_mask &= ~(1UL << (irq - 16)));
+	pyxis_update_irq_hw(cached_irq_mask &= ~(1UL << (d->irq - 16)));
 }
 
 static void
-pyxis_mask_and_ack_irq(unsigned int irq)
+pyxis_mask_and_ack_irq(struct irq_data *d)
 {
-	unsigned long bit = 1UL << (irq - 16);
+	unsigned long bit = 1UL << (d->irq - 16);
 	unsigned long mask = cached_irq_mask &= ~bit;
 
 	/* Disable the interrupt.  */
@@ -58,9 +58,9 @@ pyxis_mask_and_ack_irq(unsigned int irq)
 
 static struct irq_chip pyxis_irq_type = {
 	.name		= "PYXIS",
-	.mask_ack	= pyxis_mask_and_ack_irq,
-	.mask		= pyxis_disable_irq,
-	.unmask		= pyxis_enable_irq,
+	.irq_mask_ack	= pyxis_mask_and_ack_irq,
+	.irq_mask	= pyxis_disable_irq,
+	.irq_unmask	= pyxis_enable_irq,
 };
 
 void 
@@ -103,7 +103,7 @@ init_pyxis_irqs(unsigned long ignore_mask)
 		if ((ignore_mask >> i) & 1)
 			continue;
 		set_irq_chip_and_handler(i, &pyxis_irq_type, handle_level_irq);
-		irq_to_desc(i)->status |= IRQ_LEVEL;
+		irq_set_status_flags(i, IRQ_LEVEL);
 	}
 
 	setup_irq(16+7, &isa_cascade_irqaction);

arch/alpha/kernel/irq_srm.c

@@ -18,27 +18,27 @@
 DEFINE_SPINLOCK(srm_irq_lock);
 
 static inline void
-srm_enable_irq(unsigned int irq)
+srm_enable_irq(struct irq_data *d)
 {
 	spin_lock(&srm_irq_lock);
-	cserve_ena(irq - 16);
+	cserve_ena(d->irq - 16);
 	spin_unlock(&srm_irq_lock);
 }
 
 static void
-srm_disable_irq(unsigned int irq)
+srm_disable_irq(struct irq_data *d)
 {
 	spin_lock(&srm_irq_lock);
-	cserve_dis(irq - 16);
+	cserve_dis(d->irq - 16);
 	spin_unlock(&srm_irq_lock);
 }
 
 /* Handle interrupts from the SRM, assuming no additional weirdness.  */
 static struct irq_chip srm_irq_type = {
 	.name		= "SRM",
-	.unmask		= srm_enable_irq,
-	.mask		= srm_disable_irq,
-	.mask_ack	= srm_disable_irq,
+	.irq_unmask	= srm_enable_irq,
+	.irq_mask	= srm_disable_irq,
+	.irq_mask_ack	= srm_disable_irq,
 };
 
 void __init
@@ -52,7 +52,7 @@ init_srm_irqs(long max, unsigned long ignore_mask)
 		if (i < 64 && ((ignore_mask >> i) & 1))
 			continue;
 		set_irq_chip_and_handler(i, &srm_irq_type, handle_level_irq);
-		irq_to_desc(i)->status |= IRQ_LEVEL;
+		irq_set_status_flags(i, IRQ_LEVEL);
 	}
 }
 

arch/alpha/kernel/osf_sys.c

@@ -230,44 +230,24 @@ linux_to_osf_statfs(struct kstatfs *linux_stat, struct osf_statfs __user *osf_st
 	return copy_to_user(osf_stat, &tmp_stat, bufsiz) ? -EFAULT : 0;
 }
 
-static int
-do_osf_statfs(struct path *path, struct osf_statfs __user *buffer,
-	      unsigned long bufsiz)
+SYSCALL_DEFINE3(osf_statfs, const char __user *, pathname,
+		struct osf_statfs __user *, buffer, unsigned long, bufsiz)
 {
 	struct kstatfs linux_stat;
-	int error = vfs_statfs(path, &linux_stat);
+	int error = user_statfs(pathname, &linux_stat);
 	if (!error)
 		error = linux_to_osf_statfs(&linux_stat, buffer, bufsiz);
 	return error;	
 }
 
-SYSCALL_DEFINE3(osf_statfs, const char __user *, pathname,
-		struct osf_statfs __user *, buffer, unsigned long, bufsiz)
-{
-	struct path path;
-	int retval;
-
-	retval = user_path(pathname, &path);
-	if (!retval) {
-		retval = do_osf_statfs(&path, buffer, bufsiz);
-		path_put(&path);
-	}
-	return retval;
-}
-
 SYSCALL_DEFINE3(osf_fstatfs, unsigned long, fd,
 		struct osf_statfs __user *, buffer, unsigned long, bufsiz)
 {
-	struct file *file;
-	int retval;
-
-	retval = -EBADF;
-	file = fget(fd);
-	if (file) {
-		retval = do_osf_statfs(&file->f_path, buffer, bufsiz);
-		fput(file);
-	}
-	return retval;
+	struct kstatfs linux_stat;
+	int error = fd_statfs(fd, &linux_stat);
+	if (!error)
+		error = linux_to_osf_statfs(&linux_stat, buffer, bufsiz);
+	return error;
 }
 
 /*

arch/alpha/kernel/sys_alcor.c

@@ -44,31 +44,31 @@ alcor_update_irq_hw(unsigned long mask)
 }
 
 static inline void
-alcor_enable_irq(unsigned int irq)
+alcor_enable_irq(struct irq_data *d)
 {
-	alcor_update_irq_hw(cached_irq_mask |= 1UL << (irq - 16));
+	alcor_update_irq_hw(cached_irq_mask |= 1UL << (d->irq - 16));
 }
 
 static void
-alcor_disable_irq(unsigned int irq)
+alcor_disable_irq(struct irq_data *d)
 {
-	alcor_update_irq_hw(cached_irq_mask &= ~(1UL << (irq - 16)));
+	alcor_update_irq_hw(cached_irq_mask &= ~(1UL << (d->irq - 16)));
 }
 
 static void
-alcor_mask_and_ack_irq(unsigned int irq)
+alcor_mask_and_ack_irq(struct irq_data *d)
 {
-	alcor_disable_irq(irq);
+	alcor_disable_irq(d);
 
 	/* On ALCOR/XLT, need to dismiss interrupt via GRU. */
-	*(vuip)GRU_INT_CLEAR = 1 << (irq - 16); mb();
+	*(vuip)GRU_INT_CLEAR = 1 << (d->irq - 16); mb();
 	*(vuip)GRU_INT_CLEAR = 0; mb();
 }
 
 static void
-alcor_isa_mask_and_ack_irq(unsigned int irq)
+alcor_isa_mask_and_ack_irq(struct irq_data *d)
 {
-	i8259a_mask_and_ack_irq(irq);
+	i8259a_mask_and_ack_irq(d);
 
 	/* On ALCOR/XLT, need to dismiss interrupt via GRU. */
 	*(vuip)GRU_INT_CLEAR = 0x80000000; mb();
@@ -77,9 +77,9 @@ alcor_isa_mask_and_ack_irq(unsigned int irq)
 
 static struct irq_chip alcor_irq_type = {
 	.name		= "ALCOR",
-	.unmask		= alcor_enable_irq,
-	.mask		= alcor_disable_irq,
-	.mask_ack	= alcor_mask_and_ack_irq,
+	.irq_unmask	= alcor_enable_irq,
+	.irq_mask	= alcor_disable_irq,
+	.irq_mask_ack	= alcor_mask_and_ack_irq,
 };
 
 static void
@@ -126,9 +126,9 @@ alcor_init_irq(void)
 		if (i >= 16+20 && i <= 16+30)
 			continue;
 		set_irq_chip_and_handler(i, &alcor_irq_type, handle_level_irq);
-		irq_to_desc(i)->status |= IRQ_LEVEL;
+		irq_set_status_flags(i, IRQ_LEVEL);
 	}
-	i8259a_irq_type.ack = alcor_isa_mask_and_ack_irq;
+	i8259a_irq_type.irq_ack = alcor_isa_mask_and_ack_irq;
 
 	init_i8259a_irqs();
 	common_init_isa_dma();

arch/alpha/kernel/sys_cabriolet.c

@@ -46,22 +46,22 @@ cabriolet_update_irq_hw(unsigned int irq, unsigned long mask)
 }
 
 static inline void
-cabriolet_enable_irq(unsigned int irq)
+cabriolet_enable_irq(struct irq_data *d)
 {
-	cabriolet_update_irq_hw(irq, cached_irq_mask &= ~(1UL << irq));
+	cabriolet_update_irq_hw(d->irq, cached_irq_mask &= ~(1UL << d->irq));
 }
 
 static void
-cabriolet_disable_irq(unsigned int irq)
+cabriolet_disable_irq(struct irq_data *d)
 {
-	cabriolet_update_irq_hw(irq, cached_irq_mask |= 1UL << irq);
+	cabriolet_update_irq_hw(d->irq, cached_irq_mask |= 1UL << d->irq);
 }
 
 static struct irq_chip cabriolet_irq_type = {
 	.name		= "CABRIOLET",
-	.unmask		= cabriolet_enable_irq,
-	.mask		= cabriolet_disable_irq,
-	.mask_ack	= cabriolet_disable_irq,
+	.irq_unmask	= cabriolet_enable_irq,
+	.irq_mask	= cabriolet_disable_irq,
+	.irq_mask_ack	= cabriolet_disable_irq,
 };
 
 static void 
@@ -107,7 +107,7 @@ common_init_irq(void (*srm_dev_int)(unsigned long v))
 		for (i = 16; i < 35; ++i) {
 			set_irq_chip_and_handler(i, &cabriolet_irq_type,
 				handle_level_irq);
-			irq_to_desc(i)->status |= IRQ_LEVEL;
+			irq_set_status_flags(i, IRQ_LEVEL);
 		}
 	}
 

arch/alpha/kernel/sys_dp264.c

@@ -98,37 +98,37 @@ tsunami_update_irq_hw(unsigned long mask)
 }
 
 static void
-dp264_enable_irq(unsigned int irq)
+dp264_enable_irq(struct irq_data *d)
 {
 	spin_lock(&dp264_irq_lock);
-	cached_irq_mask |= 1UL << irq;
+	cached_irq_mask |= 1UL << d->irq;
 	tsunami_update_irq_hw(cached_irq_mask);
 	spin_unlock(&dp264_irq_lock);
 }
 
 static void
-dp264_disable_irq(unsigned int irq)
+dp264_disable_irq(struct irq_data *d)
 {
 	spin_lock(&dp264_irq_lock);
-	cached_irq_mask &= ~(1UL << irq);
+	cached_irq_mask &= ~(1UL << d->irq);
 	tsunami_update_irq_hw(cached_irq_mask);
 	spin_unlock(&dp264_irq_lock);
 }
 
 static void
-clipper_enable_irq(unsigned int irq)
+clipper_enable_irq(struct irq_data *d)
 {
 	spin_lock(&dp264_irq_lock);
-	cached_irq_mask |= 1UL << (irq - 16);
+	cached_irq_mask |= 1UL << (d->irq - 16);
 	tsunami_update_irq_hw(cached_irq_mask);
 	spin_unlock(&dp264_irq_lock);
 }
 
 static void
-clipper_disable_irq(unsigned int irq)
+clipper_disable_irq(struct irq_data *d)
 {
 	spin_lock(&dp264_irq_lock);
-	cached_irq_mask &= ~(1UL << (irq - 16));
+	cached_irq_mask &= ~(1UL << (d->irq - 16));
 	tsunami_update_irq_hw(cached_irq_mask);
 	spin_unlock(&dp264_irq_lock);
 }
@@ -149,10 +149,11 @@ cpu_set_irq_affinity(unsigned int irq, cpumask_t affinity)
 }
 
 static int
-dp264_set_affinity(unsigned int irq, const struct cpumask *affinity)
-{ 
+dp264_set_affinity(struct irq_data *d, const struct cpumask *affinity,
+		   bool force)
+{
 	spin_lock(&dp264_irq_lock);
-	cpu_set_irq_affinity(irq, *affinity);
+	cpu_set_irq_affinity(d->irq, *affinity);
 	tsunami_update_irq_hw(cached_irq_mask);
 	spin_unlock(&dp264_irq_lock);
 
@@ -160,10 +161,11 @@ dp264_set_affinity(unsigned int irq, const struct cpumask *affinity)
 }
 
 static int
-clipper_set_affinity(unsigned int irq, const struct cpumask *affinity)
-{ 
+clipper_set_affinity(struct irq_data *d, const struct cpumask *affinity,
+		     bool force)
+{
 	spin_lock(&dp264_irq_lock);
-	cpu_set_irq_affinity(irq - 16, *affinity);
+	cpu_set_irq_affinity(d->irq - 16, *affinity);
 	tsunami_update_irq_hw(cached_irq_mask);
 	spin_unlock(&dp264_irq_lock);
 
@@ -171,19 +173,19 @@ clipper_set_affinity(unsigned int irq, const struct cpumask *affinity)
 }
 
 static struct irq_chip dp264_irq_type = {
-	.name		= "DP264",
-	.unmask		= dp264_enable_irq,
-	.mask		= dp264_disable_irq,
-	.mask_ack	= dp264_disable_irq,
-	.set_affinity	= dp264_set_affinity,
+	.name			= "DP264",
+	.irq_unmask		= dp264_enable_irq,
+	.irq_mask		= dp264_disable_irq,
+	.irq_mask_ack		= dp264_disable_irq,
+	.irq_set_affinity	= dp264_set_affinity,
 };
 
 static struct irq_chip clipper_irq_type = {
-	.name		= "CLIPPER",
-	.unmask		= clipper_enable_irq,
-	.mask		= clipper_disable_irq,
-	.mask_ack	= clipper_disable_irq,
-	.set_affinity	= clipper_set_affinity,
+	.name			= "CLIPPER",
+	.irq_unmask		= clipper_enable_irq,
+	.irq_mask		= clipper_disable_irq,
+	.irq_mask_ack		= clipper_disable_irq,
+	.irq_set_affinity	= clipper_set_affinity,
 };
 
 static void
@@ -268,8 +270,8 @@ init_tsunami_irqs(struct irq_chip * ops, int imin, int imax)
 {
 	long i;
 	for (i = imin; i <= imax; ++i) {
-		irq_to_desc(i)->status |= IRQ_LEVEL;
 		set_irq_chip_and_handler(i, ops, handle_level_irq);
+		irq_set_status_flags(i, IRQ_LEVEL);
 	}
 }
 

arch/alpha/kernel/sys_eb64p.c

@@ -44,22 +44,22 @@ eb64p_update_irq_hw(unsigned int irq, unsigned long mask)
 }
 
 static inline void
-eb64p_enable_irq(unsigned int irq)
+eb64p_enable_irq(struct irq_data *d)
 {
-	eb64p_update_irq_hw(irq, cached_irq_mask &= ~(1 << irq));
+	eb64p_update_irq_hw(d->irq, cached_irq_mask &= ~(1 << d->irq));
 }
 
 static void
-eb64p_disable_irq(unsigned int irq)
+eb64p_disable_irq(struct irq_data *d)
 {
-	eb64p_update_irq_hw(irq, cached_irq_mask |= 1 << irq);
+	eb64p_update_irq_hw(d->irq, cached_irq_mask |= 1 << d->irq);
 }
 
 static struct irq_chip eb64p_irq_type = {
 	.name		= "EB64P",
-	.unmask		= eb64p_enable_irq,
-	.mask		= eb64p_disable_irq,
-	.mask_ack	= eb64p_disable_irq,
+	.irq_unmask	= eb64p_enable_irq,
+	.irq_mask	= eb64p_disable_irq,
+	.irq_mask_ack	= eb64p_disable_irq,
 };
 
 static void 
@@ -118,9 +118,9 @@ eb64p_init_irq(void)
 	init_i8259a_irqs();
 
 	for (i = 16; i < 32; ++i) {
-		irq_to_desc(i)->status |= IRQ_LEVEL;
 		set_irq_chip_and_handler(i, &eb64p_irq_type, handle_level_irq);
-	}		
+		irq_set_status_flags(i, IRQ_LEVEL);
+	}
 
 	common_init_isa_dma();
 	setup_irq(16+5, &isa_cascade_irqaction);

arch/alpha/kernel/sys_eiger.c

@@ -51,16 +51,18 @@ eiger_update_irq_hw(unsigned long irq, unsigned long mask)
 }
 
 static inline void
-eiger_enable_irq(unsigned int irq)
+eiger_enable_irq(struct irq_data *d)
 {
+	unsigned int irq = d->irq;
 	unsigned long mask;
 	mask = (cached_irq_mask[irq >= 64] &= ~(1UL << (irq & 63)));
 	eiger_update_irq_hw(irq, mask);
 }
 
 static void
-eiger_disable_irq(unsigned int irq)
+eiger_disable_irq(struct irq_data *d)
 {
+	unsigned int irq = d->irq;
 	unsigned long mask;
 	mask = (cached_irq_mask[irq >= 64] |= 1UL << (irq & 63));
 	eiger_update_irq_hw(irq, mask);
@@ -68,9 +70,9 @@ eiger_disable_irq(unsigned int irq)
 
 static struct irq_chip eiger_irq_type = {
 	.name		= "EIGER",
-	.unmask		= eiger_enable_irq,
-	.mask		= eiger_disable_irq,
-	.mask_ack	= eiger_disable_irq,
+	.irq_unmask	= eiger_enable_irq,
+	.irq_mask	= eiger_disable_irq,
+	.irq_mask_ack	= eiger_disable_irq,
 };
 
 static void
@@ -136,8 +138,8 @@ eiger_init_irq(void)
 	init_i8259a_irqs();
 
 	for (i = 16; i < 128; ++i) {
-		irq_to_desc(i)->status |= IRQ_LEVEL;
 		set_irq_chip_and_handler(i, &eiger_irq_type, handle_level_irq);
+		irq_set_status_flags(i, IRQ_LEVEL);
 	}
 }
 

arch/alpha/kernel/sys_jensen.c

@@ -63,34 +63,34 @@
  */
 
 static void
-jensen_local_enable(unsigned int irq)
+jensen_local_enable(struct irq_data *d)
 {
 	/* the parport is really hw IRQ 1, silly Jensen.  */
-	if (irq == 7)
-		i8259a_enable_irq(1);
+	if (d->irq == 7)
+		i8259a_enable_irq(d);
 }
 
 static void
-jensen_local_disable(unsigned int irq)
+jensen_local_disable(struct irq_data *d)
 {
 	/* the parport is really hw IRQ 1, silly Jensen.  */
-	if (irq == 7)
-		i8259a_disable_irq(1);
+	if (d->irq == 7)
+		i8259a_disable_irq(d);
 }
 
 static void
-jensen_local_mask_ack(unsigned int irq)
+jensen_local_mask_ack(struct irq_data *d)
 {
 	/* the parport is really hw IRQ 1, silly Jensen.  */
-	if (irq == 7)
-		i8259a_mask_and_ack_irq(1);
+	if (d->irq == 7)
+		i8259a_mask_and_ack_irq(d);
 }
 
 static struct irq_chip jensen_local_irq_type = {
 	.name		= "LOCAL",
-	.unmask		= jensen_local_enable,
-	.mask		= jensen_local_disable,
-	.mask_ack	= jensen_local_mask_ack,
+	.irq_unmask	= jensen_local_enable,
+	.irq_mask	= jensen_local_disable,
+	.irq_mask_ack	= jensen_local_mask_ack,
 };
 
 static void 

arch/alpha/kernel/sys_marvel.c

@@ -104,9 +104,10 @@ io7_get_irq_ctl(unsigned int irq, struct io7 **pio7)
 }
 
 static void
-io7_enable_irq(unsigned int irq)
+io7_enable_irq(struct irq_data *d)
 {
 	volatile unsigned long *ctl;
+	unsigned int irq = d->irq;
 	struct io7 *io7;
 
 	ctl = io7_get_irq_ctl(irq, &io7);
@@ -115,7 +116,7 @@ io7_enable_irq(unsigned int irq)
 		       __func__, irq);
 		return;
 	}
-		
+
 	spin_lock(&io7->irq_lock);
 	*ctl |= 1UL << 24;
 	mb();
@@ -124,9 +125,10 @@ io7_enable_irq(unsigned int irq)
 }
 
 static void
-io7_disable_irq(unsigned int irq)
+io7_disable_irq(struct irq_data *d)
 {
 	volatile unsigned long *ctl;
+	unsigned int irq = d->irq;
 	struct io7 *io7;
 
 	ctl = io7_get_irq_ctl(irq, &io7);
@@ -135,7 +137,7 @@ io7_disable_irq(unsigned int irq)
 		       __func__, irq);
 		return;
 	}
-		
+
 	spin_lock(&io7->irq_lock);
 	*ctl &= ~(1UL << 24);
 	mb();
@@ -144,35 +146,29 @@ io7_disable_irq(unsigned int irq)
 }
 
 static void
-marvel_irq_noop(unsigned int irq) 
-{ 
-	return; 
-}
-
-static unsigned int
-marvel_irq_noop_return(unsigned int irq) 
-{ 
-	return 0; 
+marvel_irq_noop(struct irq_data *d)
+{
+	return;
 }
 
 static struct irq_chip marvel_legacy_irq_type = {
 	.name		= "LEGACY",
-	.mask		= marvel_irq_noop,
-	.unmask		= marvel_irq_noop,
+	.irq_mask	= marvel_irq_noop,
+	.irq_unmask	= marvel_irq_noop,
 };
 
 static struct irq_chip io7_lsi_irq_type = {
 	.name		= "LSI",
-	.unmask		= io7_enable_irq,
-	.mask		= io7_disable_irq,
-	.mask_ack	= io7_disable_irq,
+	.irq_unmask	= io7_enable_irq,
+	.irq_mask	= io7_disable_irq,
+	.irq_mask_ack	= io7_disable_irq,
 };
 
 static struct irq_chip io7_msi_irq_type = {
 	.name		= "MSI",
-	.unmask		= io7_enable_irq,
-	.mask		= io7_disable_irq,
-	.ack		= marvel_irq_noop,
+	.irq_unmask	= io7_enable_irq,
+	.irq_mask	= io7_disable_irq,
+	.irq_ack	= marvel_irq_noop,
 };
 
 static void
@@ -280,8 +276,8 @@ init_io7_irqs(struct io7 *io7,
 
 	/* Set up the lsi irqs.  */
 	for (i = 0; i < 128; ++i) {
-		irq_to_desc(base + i)->status |= IRQ_LEVEL;
 		set_irq_chip_and_handler(base + i, lsi_ops, handle_level_irq);
+		irq_set_status_flags(i, IRQ_LEVEL);
 	}
 
 	/* Disable the implemented irqs in hardware.  */
@@ -294,8 +290,8 @@ init_io7_irqs(struct io7 *io7,
 
 	/* Set up the msi irqs.  */
 	for (i = 128; i < (128 + 512); ++i) {
-		irq_to_desc(base + i)->status |= IRQ_LEVEL;
 		set_irq_chip_and_handler(base + i, msi_ops, handle_level_irq);
+		irq_set_status_flags(i, IRQ_LEVEL);
 	}
 
 	for (i = 0; i < 16; ++i)

arch/alpha/kernel/sys_mikasa.c

@@ -43,22 +43,22 @@ mikasa_update_irq_hw(int mask)
 }
 
 static inline void
-mikasa_enable_irq(unsigned int irq)
+mikasa_enable_irq(struct irq_data *d)
 {
-	mikasa_update_irq_hw(cached_irq_mask |= 1 << (irq - 16));
+	mikasa_update_irq_hw(cached_irq_mask |= 1 << (d->irq - 16));
 }
 
 static void
-mikasa_disable_irq(unsigned int irq)
+mikasa_disable_irq(struct irq_data *d)
 {
-	mikasa_update_irq_hw(cached_irq_mask &= ~(1 << (irq - 16)));
+	mikasa_update_irq_hw(cached_irq_mask &= ~(1 << (d->irq - 16)));
 }
 
 static struct irq_chip mikasa_irq_type = {
 	.name		= "MIKASA",
-	.unmask		= mikasa_enable_irq,
-	.mask		= mikasa_disable_irq,
-	.mask_ack	= mikasa_disable_irq,
+	.irq_unmask	= mikasa_enable_irq,
+	.irq_mask	= mikasa_disable_irq,
+	.irq_mask_ack	= mikasa_disable_irq,
 };
 
 static void 
@@ -98,8 +98,8 @@ mikasa_init_irq(void)
 	mikasa_update_irq_hw(0);
 
 	for (i = 16; i < 32; ++i) {
-		irq_to_desc(i)->status |= IRQ_LEVEL;
 		set_irq_chip_and_handler(i, &mikasa_irq_type, handle_level_irq);
+		irq_set_status_flags(i, IRQ_LEVEL);
 	}
 
 	init_i8259a_irqs();

arch/alpha/kernel/sys_noritake.c

@@ -48,22 +48,22 @@ noritake_update_irq_hw(int irq, int mask)
 }
 
 static void
-noritake_enable_irq(unsigned int irq)
+noritake_enable_irq(struct irq_data *d)
 {
-	noritake_update_irq_hw(irq, cached_irq_mask |= 1 << (irq - 16));
+	noritake_update_irq_hw(d->irq, cached_irq_mask |= 1 << (d->irq - 16));
 }
 
 static void
-noritake_disable_irq(unsigned int irq)
+noritake_disable_irq(struct irq_data *d)
 {
-	noritake_update_irq_hw(irq, cached_irq_mask &= ~(1 << (irq - 16)));
+	noritake_update_irq_hw(d->irq, cached_irq_mask &= ~(1 << (d->irq - 16)));
 }
 
 static struct irq_chip noritake_irq_type = {
 	.name		= "NORITAKE",
-	.unmask		= noritake_enable_irq,
-	.mask		= noritake_disable_irq,
-	.mask_ack	= noritake_disable_irq,
+	.irq_unmask	= noritake_enable_irq,
+	.irq_mask	= noritake_disable_irq,
+	.irq_mask_ack	= noritake_disable_irq,
 };
 
 static void 
@@ -127,8 +127,8 @@ noritake_init_irq(void)
 	outw(0, 0x54c);
 
 	for (i = 16; i < 48; ++i) {
-		irq_to_desc(i)->status |= IRQ_LEVEL;
 		set_irq_chip_and_handler(i, &noritake_irq_type, handle_level_irq);
+		irq_set_status_flags(i, IRQ_LEVEL);
 	}
 
 	init_i8259a_irqs();

arch/alpha/kernel/sys_rawhide.c

@@ -56,9 +56,10 @@ rawhide_update_irq_hw(int hose, int mask)
   (((h) < MCPCIA_MAX_HOSES) && (cached_irq_masks[(h)] != 0))
 
 static inline void 
-rawhide_enable_irq(unsigned int irq)
+rawhide_enable_irq(struct irq_data *d)
 {
 	unsigned int mask, hose;
+	unsigned int irq = d->irq;
 
 	irq -= 16;
 	hose = irq / 24;
@@ -76,9 +77,10 @@ rawhide_enable_irq(unsigned int irq)
 }
 
 static void 
-rawhide_disable_irq(unsigned int irq)
+rawhide_disable_irq(struct irq_data *d)
 {
 	unsigned int mask, hose;
+	unsigned int irq = d->irq;
 
 	irq -= 16;
 	hose = irq / 24;
@@ -96,9 +98,10 @@ rawhide_disable_irq(unsigned int irq)
 }
 
 static void
-rawhide_mask_and_ack_irq(unsigned int irq)
+rawhide_mask_and_ack_irq(struct irq_data *d)
 {
 	unsigned int mask, mask1, hose;
+	unsigned int irq = d->irq;
 
 	irq -= 16;
 	hose = irq / 24;
@@ -123,9 +126,9 @@ rawhide_mask_and_ack_irq(unsigned int irq)
 
 static struct irq_chip rawhide_irq_type = {
 	.name		= "RAWHIDE",
-	.unmask		= rawhide_enable_irq,
-	.mask		= rawhide_disable_irq,
-	.mask_ack	= rawhide_mask_and_ack_irq,
+	.irq_unmask	= rawhide_enable_irq,
+	.irq_mask	= rawhide_disable_irq,
+	.irq_mask_ack	= rawhide_mask_and_ack_irq,
 };
 
 static void 
@@ -177,8 +180,8 @@ rawhide_init_irq(void)
 	}
 
 	for (i = 16; i < 128; ++i) {
-		irq_to_desc(i)->status |= IRQ_LEVEL;
 		set_irq_chip_and_handler(i, &rawhide_irq_type, handle_level_irq);
+		irq_set_status_flags(i, IRQ_LEVEL);
 	}
 
 	init_i8259a_irqs();

arch/alpha/kernel/sys_rx164.c

@@ -47,22 +47,22 @@ rx164_update_irq_hw(unsigned long mask)
 }
 
 static inline void
-rx164_enable_irq(unsigned int irq)
+rx164_enable_irq(struct irq_data *d)
 {
-	rx164_update_irq_hw(cached_irq_mask |= 1UL << (irq - 16));
+	rx164_update_irq_hw(cached_irq_mask |= 1UL << (d->irq - 16));
 }
 
 static void
-rx164_disable_irq(unsigned int irq)
+rx164_disable_irq(struct irq_data *d)
 {
-	rx164_update_irq_hw(cached_irq_mask &= ~(1UL << (irq - 16)));
+	rx164_update_irq_hw(cached_irq_mask &= ~(1UL << (d->irq - 16)));
 }
 
 static struct irq_chip rx164_irq_type = {
 	.name		= "RX164",
-	.unmask		= rx164_enable_irq,
-	.mask		= rx164_disable_irq,
-	.mask_ack	= rx164_disable_irq,
+	.irq_unmask	= rx164_enable_irq,
+	.irq_mask	= rx164_disable_irq,
+	.irq_mask_ack	= rx164_disable_irq,
 };
 
 static void 
@@ -99,8 +99,8 @@ rx164_init_irq(void)
 
 	rx164_update_irq_hw(0);
 	for (i = 16; i < 40; ++i) {
-		irq_to_desc(i)->status |= IRQ_LEVEL;
 		set_irq_chip_and_handler(i, &rx164_irq_type, handle_level_irq);
+		irq_set_status_flags(i, IRQ_LEVEL);
 	}
 
 	init_i8259a_irqs();

arch/alpha/kernel/sys_sable.c

@@ -443,11 +443,11 @@ lynx_swizzle(struct pci_dev *dev, u8 *pinp)
 /* GENERIC irq routines */
 
 static inline void
-sable_lynx_enable_irq(unsigned int irq)
+sable_lynx_enable_irq(struct irq_data *d)
 {
 	unsigned long bit, mask;
 
-	bit = sable_lynx_irq_swizzle->irq_to_mask[irq];
+	bit = sable_lynx_irq_swizzle->irq_to_mask[d->irq];
 	spin_lock(&sable_lynx_irq_lock);
 	mask = sable_lynx_irq_swizzle->shadow_mask &= ~(1UL << bit);
 	sable_lynx_irq_swizzle->update_irq_hw(bit, mask);
@@ -459,11 +459,11 @@ sable_lynx_enable_irq(unsigned int irq)
 }
 
 static void
-sable_lynx_disable_irq(unsigned int irq)
+sable_lynx_disable_irq(struct irq_data *d)
 {
 	unsigned long bit, mask;
 
-	bit = sable_lynx_irq_swizzle->irq_to_mask[irq];
+	bit = sable_lynx_irq_swizzle->irq_to_mask[d->irq];
 	spin_lock(&sable_lynx_irq_lock);
 	mask = sable_lynx_irq_swizzle->shadow_mask |= 1UL << bit;
 	sable_lynx_irq_swizzle->update_irq_hw(bit, mask);
@@ -475,11 +475,11 @@ sable_lynx_disable_irq(unsigned int irq)
 }
 
 static void
-sable_lynx_mask_and_ack_irq(unsigned int irq)
+sable_lynx_mask_and_ack_irq(struct irq_data *d)
 {
 	unsigned long bit, mask;
 
-	bit = sable_lynx_irq_swizzle->irq_to_mask[irq];
+	bit = sable_lynx_irq_swizzle->irq_to_mask[d->irq];
 	spin_lock(&sable_lynx_irq_lock);
 	mask = sable_lynx_irq_swizzle->shadow_mask |= 1UL << bit;
 	sable_lynx_irq_swizzle->update_irq_hw(bit, mask);
@@ -489,9 +489,9 @@ sable_lynx_mask_and_ack_irq(unsigned int irq)
 
 static struct irq_chip sable_lynx_irq_type = {
 	.name		= "SABLE/LYNX",
-	.unmask		= sable_lynx_enable_irq,
-	.mask		= sable_lynx_disable_irq,
-	.mask_ack	= sable_lynx_mask_and_ack_irq,
+	.irq_unmask	= sable_lynx_enable_irq,
+	.irq_mask	= sable_lynx_disable_irq,
+	.irq_mask_ack	= sable_lynx_mask_and_ack_irq,
 };
 
 static void 
@@ -518,9 +518,9 @@ sable_lynx_init_irq(int nr_of_irqs)
 	long i;
 
 	for (i = 0; i < nr_of_irqs; ++i) {
-		irq_to_desc(i)->status |= IRQ_LEVEL;
 		set_irq_chip_and_handler(i, &sable_lynx_irq_type,
 			handle_level_irq);
+		irq_set_status_flags(i, IRQ_LEVEL);
 	}
 
 	common_init_isa_dma();