[media] gspca: Convert some uppercase hexadecimal values to lowercase

Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

drivers/media/video/gspca/cpia1.c

@@ -37,7 +37,7 @@ MODULE_LICENSE("GPL");
 /* constant value's */
 #define MAGIC_0		0x19
 #define MAGIC_1		0x68
-#define DATA_IN		0xC0
+#define DATA_IN		0xc0
 #define DATA_OUT	0x40
 #define VIDEOSIZE_QCIF	0	/* 176x144 */
 #define VIDEOSIZE_CIF	1	/* 352x288 */
@@ -660,9 +660,9 @@ static int do_command(struct gspca_dev *gspca_dev, u16 command,
 		if (sd->params.qx3.button) {
 			/* button pressed - unlock the latch */
 			do_command(gspca_dev, CPIA_COMMAND_WriteMCPort,
-				   3, 0xDF, 0xDF, 0);
+				   3, 0xdf, 0xdf, 0);
 			do_command(gspca_dev, CPIA_COMMAND_WriteMCPort,
-				   3, 0xFF, 0xFF, 0);
+				   3, 0xff, 0xff, 0);
 		}
 
 		/* test whether microscope is cradled */
@@ -1110,12 +1110,12 @@ static int command_setlights(struct gspca_dev *gspca_dev)
 	p2 = (sd->params.qx3.toplight == 0) << 3;
 
 	ret = do_command(gspca_dev, CPIA_COMMAND_WriteVCReg,
-			 0x90, 0x8F, 0x50, 0);
+			 0x90, 0x8f, 0x50, 0);
 	if (ret)
 		return ret;
 
 	return do_command(gspca_dev, CPIA_COMMAND_WriteMCPort, 2, 0,
-			  p1 | p2 | 0xE0, 0);
+			  p1 | p2 | 0xe0, 0);
 }
 
 static int set_flicker(struct gspca_dev *gspca_dev, int on, int apply)

drivers/media/video/gspca/m5602/m5602_ov9650.c

@@ -624,7 +624,7 @@ static int ov9650_set_gain(struct gspca_dev *gspca_dev, __s32 val)
 
 	/* Mask away all uninteresting bits */
 	i2c_data = ((val & 0x0300) >> 2) |
-			(i2c_data & 0x3F);
+			(i2c_data & 0x3f);
 	err = m5602_write_sensor(sd, OV9650_VREF, &i2c_data, 1);
 	if (err < 0)
 		return err;

drivers/media/video/gspca/pac207.c

@@ -162,7 +162,7 @@ static const __u8 pac207_sensor_init[][8] = {
 	{0x10, 0x12, 0x0d, 0x12, 0x0c, 0x01, 0x29, 0x84},
 	{0x49, 0x64, 0x64, 0x64, 0x04, 0x10, 0xf0, 0x30},
 	{0x00, 0x00, 0x00, 0x70, 0xa0, 0xf8, 0x00, 0x00},
-	{0x32, 0x00, 0x96, 0x00, 0xA2, 0x02, 0xaf, 0x00},
+	{0x32, 0x00, 0x96, 0x00, 0xa2, 0x02, 0xaf, 0x00},
 };
 
 static int pac207_write_regs(struct gspca_dev *gspca_dev, u16 index,
@@ -228,7 +228,7 @@ static int sd_config(struct gspca_dev *gspca_dev,
 
 	idreg[0] = pac207_read_reg(gspca_dev, 0x0000);
 	idreg[1] = pac207_read_reg(gspca_dev, 0x0001);
-	idreg[0] = ((idreg[0] & 0x0F) << 4) | ((idreg[1] & 0xf0) >> 4);
+	idreg[0] = ((idreg[0] & 0x0f) << 4) | ((idreg[1] & 0xf0) >> 4);
 	idreg[1] = idreg[1] & 0x0f;
 	PDEBUG(D_PROBE, "Pixart Sensor ID 0x%02X Chips ID 0x%02X",
 		idreg[0], idreg[1]);

drivers/media/video/gspca/sonixb.c

@@ -340,7 +340,7 @@ static const __u8 ov6650_sensor_init[][8] = {
 		 * but blue wont be there. Avoid this data ... */
 	{0xd0, 0x60, 0x26, 0x01, 0x14, 0xd8, 0xa4, 0x10}, /* format out? */
 	{0xd0, 0x60, 0x26, 0x01, 0x14, 0xd8, 0xa4, 0x10},
-	{0xa0, 0x60, 0x30, 0x3d, 0x0A, 0xd8, 0xa4, 0x10},
+	{0xa0, 0x60, 0x30, 0x3d, 0x0a, 0xd8, 0xa4, 0x10},
 	/* Enable rgb brightness control */
 	{0xa0, 0x60, 0x61, 0x08, 0x00, 0x00, 0x00, 0x10},
 	/* HDG: Note windows uses the line below, which sets both register 0x60
@@ -505,7 +505,7 @@ static const __u8 pas202_sensor_init[][8] = {
 	{0xa0, 0x40, 0x02, 0x04, 0x00, 0x00, 0x00, 0x10},
 	{0xd0, 0x40, 0x04, 0x07, 0x34, 0x00, 0x09, 0x10},
 	{0xd0, 0x40, 0x08, 0x01, 0x00, 0x00, 0x01, 0x10},
-	{0xd0, 0x40, 0x0C, 0x00, 0x0C, 0x01, 0x32, 0x10},
+	{0xd0, 0x40, 0x0c, 0x00, 0x0c, 0x01, 0x32, 0x10},
 	{0xd0, 0x40, 0x10, 0x00, 0x01, 0x00, 0x63, 0x10},
 	{0xa0, 0x40, 0x15, 0x70, 0x01, 0x00, 0x63, 0x10},
 	{0xa0, 0x40, 0x18, 0x00, 0x01, 0x00, 0x63, 0x10},

drivers/media/video/gspca/spca561.c

@@ -597,7 +597,7 @@ static void setgain(struct gspca_dev *gspca_dev)
 	else if (sd->gain < 128)
 		gspca_dev->usb_buf[0] = (sd->gain / 2) | 0x40;
 	else
-		gspca_dev->usb_buf[0] = (sd->gain / 4) | 0xC0;
+		gspca_dev->usb_buf[0] = (sd->gain / 4) | 0xc0;
 
 	gspca_dev->usb_buf[1] = 0;
 	reg_w_buf(gspca_dev, 0x8335, 2);

drivers/media/video/gspca/stv06xx/stv06xx.c

@@ -349,7 +349,7 @@ static void stv06xx_pkt_scan(struct gspca_dev *gspca_dev,
 		}
 
 		/* First byte seem to be 02=data 2nd byte is unknown??? */
-		if (sd->bridge == BRIDGE_ST6422 && (id & 0xFF00) == 0x0200)
+		if (sd->bridge == BRIDGE_ST6422 && (id & 0xff00) == 0x0200)
 			goto frame_data;
 
 		switch (id) {

drivers/media/video/gspca/stv06xx/stv06xx_st6422.c

@@ -151,11 +151,11 @@ static int st6422_init(struct sd *sd)
 		{ STV_ISO_ENABLE, 0x00 }, /* disable capture */
 		{ 0x1436, 0x00 },
 		{ 0x1432, 0x03 },	/* 0x00-0x1F brightness */
-		{ 0x143a, 0xF9 },	/* 0x00-0x0F contrast */
+		{ 0x143a, 0xf9 },	/* 0x00-0x0F contrast */
 		{ 0x0509, 0x38 },	/* R */
 		{ 0x050a, 0x38 },	/* G */
 		{ 0x050b, 0x38 },	/* B */
-		{ 0x050c, 0x2A },
+		{ 0x050c, 0x2a },
 		{ 0x050d, 0x01 },
 
 

drivers/media/video/gspca/t613.c

@@ -487,7 +487,7 @@ static const u8 gamma_table[GAMMA_MAX][17] = {
 	{0x00, 0x02, 0x07, 0x0f, 0x18, 0x24, 0x30, 0x3f,	/* 3 */
 	 0x4f, 0x61, 0x73, 0x88, 0x9d, 0xb4, 0xcd, 0xe6,
 	 0xff},
-	{0x00, 0x04, 0x0B, 0x15, 0x20, 0x2d, 0x3b, 0x4a,	/* 4 */
+	{0x00, 0x04, 0x0b, 0x15, 0x20, 0x2d, 0x3b, 0x4a,	/* 4 */
 	 0x5b, 0x6c, 0x7f, 0x92, 0xa7, 0xbc, 0xd2, 0xe9,
 	 0xff},
 	{0x00, 0x07, 0x11, 0x15, 0x20, 0x2d, 0x48, 0x58,	/* 5 */

drivers/media/video/gspca/tv8532.c

@@ -132,7 +132,7 @@ static const struct v4l2_pix_format sif_mode[] = {
 #define R36_PID		0x36
 #define R37_PIDH	0x37
 #define R39_Test1	0x39		/* GPIO */
-#define R3B_Test3	0x3B		/* GPIO */
+#define R3B_Test3	0x3b		/* GPIO */
 #define R83_AD_IDH	0x83
 #define R91_AD_SLOPEREG 0x91
 #define R94_AD_BITCONTROL 0x94