[SCSI] qla2xxx: Add MBX command routines for ISP24xx support.

Add MBX command routines for ISP24xx support.

Generalize several routines [qla2x00_load_ram_ext(),
qla2x00_execute_fw(), qla2x00_verify_checksum()] to handle
larger addressing space.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

drivers/scsi/qla2xxx/qla_def.h

@@ -2028,7 +2028,8 @@ struct isp_operations {
 	int (*abort_target) (struct fc_port *);
 	int (*fabric_login) (struct scsi_qla_host *, uint16_t, uint8_t,
 		uint8_t, uint8_t, uint16_t *, uint8_t);
-	int (*fabric_logout) (struct scsi_qla_host *, uint16_t);
+	int (*fabric_logout) (struct scsi_qla_host *, uint16_t, uint8_t,
+	    uint8_t, uint8_t);
 
 	uint16_t (*calc_req_entries) (uint16_t);
 	void (*build_iocbs) (srb_t *, cmd_entry_t *, uint16_t);

drivers/scsi/qla2xxx/qla_gbl.h

@@ -104,10 +104,10 @@ extern int
 qla2x00_load_ram(scsi_qla_host_t *, dma_addr_t, uint16_t, uint16_t);
 
 extern int
-qla2x00_load_ram_ext(scsi_qla_host_t *, dma_addr_t, uint32_t, uint16_t);
+qla2x00_load_ram_ext(scsi_qla_host_t *, dma_addr_t, uint32_t, uint32_t);
 
 extern int
-qla2x00_execute_fw(scsi_qla_host_t *);
+qla2x00_execute_fw(scsi_qla_host_t *, uint32_t);
 
 extern void
 qla2x00_get_fw_version(scsi_qla_host_t *, uint16_t *,
@@ -123,7 +123,7 @@ extern int
 qla2x00_mbx_reg_test(scsi_qla_host_t *);
 
 extern int
-qla2x00_verify_checksum(scsi_qla_host_t *);
+qla2x00_verify_checksum(scsi_qla_host_t *, uint32_t);
 
 extern int
 qla2x00_issue_iocb(scsi_qla_host_t *, void *, dma_addr_t, size_t);
@@ -133,7 +133,7 @@ qla2x00_abort_command(scsi_qla_host_t *, srb_t *);
 
 #if USE_ABORT_TGT
 extern int
-qla2x00_abort_target(fc_port_t *fcport);
+qla2x00_abort_target(fc_port_t *);
 #endif
 
 extern int
@@ -167,12 +167,18 @@ qla2x00_send_sns(scsi_qla_host_t *, dma_addr_t, uint16_t, size_t);
 extern int
 qla2x00_login_fabric(scsi_qla_host_t *, uint16_t, uint8_t, uint8_t, uint8_t,
     uint16_t *, uint8_t);
+extern int
+qla24xx_login_fabric(scsi_qla_host_t *, uint16_t, uint8_t, uint8_t, uint8_t,
+    uint16_t *, uint8_t);
 
 extern int
 qla2x00_login_local_device(scsi_qla_host_t *, uint16_t, uint16_t *, uint8_t);
 
 extern int
-qla2x00_fabric_logout(scsi_qla_host_t *ha, uint16_t loop_id);
+qla2x00_fabric_logout(scsi_qla_host_t *, uint16_t, uint8_t, uint8_t, uint8_t);
+
+extern int
+qla24xx_fabric_logout(scsi_qla_host_t *, uint16_t, uint8_t, uint8_t, uint8_t);
 
 extern int
 qla2x00_full_login_lip(scsi_qla_host_t *ha);
@@ -187,6 +193,18 @@ qla2x00_get_resource_cnts(scsi_qla_host_t *, uint16_t *, uint16_t *, uint16_t *,
 extern int
 qla2x00_get_fcal_position_map(scsi_qla_host_t *ha, char *pos_map);
 
+extern int qla24xx_abort_command(scsi_qla_host_t *, srb_t *);
+extern int qla24xx_abort_target(fc_port_t *);
+
+extern int qla2x00_system_error(scsi_qla_host_t *);
+
+extern int
+qla2x00_get_serdes_params(scsi_qla_host_t *, uint16_t *, uint16_t *,
+    uint16_t *);
+
+extern int
+qla2x00_set_serdes_params(scsi_qla_host_t *, uint16_t, uint16_t, uint16_t);
+
 /*
  * Global Function Prototypes in qla_isr.c source file.
  */

drivers/scsi/qla2xxx/qla_init.c

@@ -331,7 +331,9 @@ qla2x00_isp_firmware(scsi_qla_host_t *ha)
 		qla_printk(KERN_INFO, ha, "RISC CODE NOT loaded\n");
 
 		/* Verify checksum of loaded RISC code. */
-		rval = qla2x00_verify_checksum(ha);
+		rval = qla2x00_verify_checksum(ha,
+		    IS_QLA24XX(ha) || IS_QLA25XX(ha) ? RISC_SADDRESS :
+		    *ha->brd_info->fw_info[0].fwstart);
 	}
 
 	if (rval) {
@@ -756,13 +758,17 @@ qla2x00_setup_chip(scsi_qla_host_t *ha)
 		DEBUG(printk("scsi(%ld): Verifying Checksum of loaded RISC "
 		    "code.\n", ha->host_no));
 
-		rval = qla2x00_verify_checksum(ha);
+		rval = qla2x00_verify_checksum(ha,
+		    IS_QLA24XX(ha) || IS_QLA25XX(ha) ? RISC_SADDRESS :
+		    *ha->brd_info->fw_info[0].fwstart);
 		if (rval == QLA_SUCCESS) {
 			/* Start firmware execution. */
 			DEBUG(printk("scsi(%ld): Checksum OK, start "
 			    "firmware.\n", ha->host_no));
 
-			rval = qla2x00_execute_fw(ha);
+			rval = qla2x00_execute_fw(ha,
+			    IS_QLA24XX(ha) || IS_QLA25XX(ha) ? RISC_SADDRESS :
+			    *ha->brd_info->fw_info[0].fwstart);
 			/* Retrieve firmware information. */
 			if (rval == QLA_SUCCESS && ha->fw_major_version == 0) {
 				qla2x00_get_fw_version(ha,
@@ -2011,7 +2017,10 @@ qla2x00_configure_fabric(scsi_qla_host_t *ha)
 				    fcport->port_type != FCT_BROADCAST) {
 
 					ha->isp_ops.fabric_logout(ha,
-					    fcport->loop_id);
+					    fcport->loop_id,
+					    fcport->d_id.b.domain,
+					    fcport->d_id.b.area,
+					    fcport->d_id.b.al_pa);
 					fcport->loop_id = FC_NO_LOOP_ID;
 				}
 			}
@@ -2256,7 +2265,9 @@ qla2x00_find_all_fabric_devs(scsi_qla_host_t *ha, struct list_head *new_fcports)
 			    (fcport->flags & FCF_TAPE_PRESENT) == 0 &&
 			    fcport->port_type != FCT_INITIATOR &&
 			    fcport->port_type != FCT_BROADCAST) {
-				ha->isp_ops.fabric_logout(ha, fcport->loop_id);
+				ha->isp_ops.fabric_logout(ha, fcport->loop_id,
+				    fcport->d_id.b.domain, fcport->d_id.b.area,
+				    fcport->d_id.b.al_pa);
 				fcport->loop_id = FC_NO_LOOP_ID;
 			}
 
@@ -2515,7 +2526,9 @@ qla2x00_fabric_dev_login(scsi_qla_host_t *ha, fc_port_t *fcport,
 	if (rval == QLA_SUCCESS) {
 		rval = qla2x00_get_port_database(ha, fcport, 0);
 		if (rval != QLA_SUCCESS) {
-			ha->isp_ops.fabric_logout(ha, fcport->loop_id);
+			ha->isp_ops.fabric_logout(ha, fcport->loop_id,
+			    fcport->d_id.b.domain, fcport->d_id.b.area,
+			    fcport->d_id.b.al_pa);
 		} else {
 			qla2x00_update_fcport(ha, fcport);
 		}
@@ -2620,7 +2633,9 @@ qla2x00_fabric_login(scsi_qla_host_t *ha, fc_port_t *fcport,
 			 * dead.
 			 */
 			*next_loopid = fcport->loop_id;
-			ha->isp_ops.fabric_logout(ha, fcport->loop_id);
+			ha->isp_ops.fabric_logout(ha, fcport->loop_id,
+			    fcport->d_id.b.domain, fcport->d_id.b.area,
+			    fcport->d_id.b.al_pa);
 			qla2x00_mark_device_lost(ha, fcport, 1);
 
 			rval = 1;
@@ -2636,7 +2651,9 @@ qla2x00_fabric_login(scsi_qla_host_t *ha, fc_port_t *fcport,
 			    fcport->d_id.b.al_pa, fcport->loop_id, jiffies));
 
 			*next_loopid = fcport->loop_id;
-			ha->isp_ops.fabric_logout(ha, fcport->loop_id);
+			ha->isp_ops.fabric_logout(ha, fcport->loop_id,
+			    fcport->d_id.b.domain, fcport->d_id.b.area,
+			    fcport->d_id.b.al_pa);
 			fcport->loop_id = FC_NO_LOOP_ID;
 			atomic_set(&fcport->state, FCS_DEVICE_DEAD);
 

drivers/scsi/qla2xxx/qla_os.c

@@ -2002,7 +2002,10 @@ qla2x00_do_dpc(void *data)
 						if (fcport->flags &
 						    FCF_TAPE_PRESENT)
 							ha->isp_ops.fabric_logout(
-							    ha, fcport->loop_id);
+							    ha, fcport->loop_id,
+							    fcport->d_id.b.domain,
+							    fcport->d_id.b.area,
+							    fcport->d_id.b.al_pa);
 						status = qla2x00_fabric_login(
 						    ha, fcport, &next_loopid);
 					} else