Merge branch 'pm-sr' of ssh://master.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap-pm into omap-for-linus

arch/arm/mach-omap2/Makefile

@@ -18,6 +18,8 @@ obj-$(CONFIG_ARCH_OMAP4) += prm44xx.o $(hwmod-common)
 
 obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o
 
+obj-$(CONFIG_TWL4030_CORE) += omap_twl.o
+
 # SMP support ONLY available for OMAP4
 obj-$(CONFIG_SMP)			+= omap-smp.o omap-headsmp.o
 obj-$(CONFIG_LOCAL_TIMERS)		+= timer-mpu.o
@@ -57,10 +59,13 @@ endif
 # Power Management
 ifeq ($(CONFIG_PM),y)
 obj-$(CONFIG_ARCH_OMAP2)		+= pm24xx.o
-obj-$(CONFIG_ARCH_OMAP2)		+= sleep24xx.o pm_bus.o
-obj-$(CONFIG_ARCH_OMAP3)		+= pm34xx.o sleep34xx.o cpuidle34xx.o pm_bus.o
-obj-$(CONFIG_ARCH_OMAP4)		+= pm44xx.o pm_bus.o
+obj-$(CONFIG_ARCH_OMAP2)		+= sleep24xx.o pm_bus.o voltage.o
+obj-$(CONFIG_ARCH_OMAP3)		+= pm34xx.o sleep34xx.o voltage.o \
+					   cpuidle34xx.o pm_bus.o
+obj-$(CONFIG_ARCH_OMAP4)		+= pm44xx.o voltage.o pm_bus.o
 obj-$(CONFIG_PM_DEBUG)			+= pm-debug.o
+obj-$(CONFIG_OMAP_SMARTREFLEX)          += sr_device.o smartreflex.o
+obj-$(CONFIG_OMAP_SMARTREFLEX_CLASS3)	+= smartreflex-class3.o
 
 AFLAGS_sleep24xx.o			:=-Wa,-march=armv6
 AFLAGS_sleep34xx.o			:=-Wa,-march=armv7-a

arch/arm/mach-omap2/control.h

@@ -148,6 +148,15 @@
 #define OMAP343X_CONTROL_TEST_KEY_11	(OMAP2_CONTROL_GENERAL + 0x00f4)
 #define OMAP343X_CONTROL_TEST_KEY_12	(OMAP2_CONTROL_GENERAL + 0x00f8)
 #define OMAP343X_CONTROL_TEST_KEY_13	(OMAP2_CONTROL_GENERAL + 0x00fc)
+#define OMAP343X_CONTROL_FUSE_OPP1_VDD1 (OMAP2_CONTROL_GENERAL + 0x0110)
+#define OMAP343X_CONTROL_FUSE_OPP2_VDD1 (OMAP2_CONTROL_GENERAL + 0x0114)
+#define OMAP343X_CONTROL_FUSE_OPP3_VDD1 (OMAP2_CONTROL_GENERAL + 0x0118)
+#define OMAP343X_CONTROL_FUSE_OPP4_VDD1 (OMAP2_CONTROL_GENERAL + 0x011c)
+#define OMAP343X_CONTROL_FUSE_OPP5_VDD1 (OMAP2_CONTROL_GENERAL + 0x0120)
+#define OMAP343X_CONTROL_FUSE_OPP1_VDD2 (OMAP2_CONTROL_GENERAL + 0x0124)
+#define OMAP343X_CONTROL_FUSE_OPP2_VDD2 (OMAP2_CONTROL_GENERAL + 0x0128)
+#define OMAP343X_CONTROL_FUSE_OPP3_VDD2 (OMAP2_CONTROL_GENERAL + 0x012c)
+#define OMAP343X_CONTROL_FUSE_SR        (OMAP2_CONTROL_GENERAL + 0x0130)
 #define OMAP343X_CONTROL_IVA2_BOOTADDR	(OMAP2_CONTROL_GENERAL + 0x0190)
 #define OMAP343X_CONTROL_IVA2_BOOTMOD	(OMAP2_CONTROL_GENERAL + 0x0194)
 #define OMAP343X_CONTROL_DEBOBS(i)	(OMAP2_CONTROL_GENERAL + 0x01B0 \
@@ -164,6 +173,26 @@
 #define OMAP343X_CONTROL_SRAMLDO5	(OMAP2_CONTROL_GENERAL + 0x02C0)
 #define OMAP343X_CONTROL_CSI		(OMAP2_CONTROL_GENERAL + 0x02C4)
 
+/* OMAP3630 only CONTROL_GENERAL register offsets */
+#define OMAP3630_CONTROL_FUSE_OPP1G_VDD1        (OMAP2_CONTROL_GENERAL + 0x0110)
+#define OMAP3630_CONTROL_FUSE_OPP50_VDD1        (OMAP2_CONTROL_GENERAL + 0x0114)
+#define OMAP3630_CONTROL_FUSE_OPP100_VDD1       (OMAP2_CONTROL_GENERAL + 0x0118)
+#define OMAP3630_CONTROL_FUSE_OPP120_VDD1       (OMAP2_CONTROL_GENERAL + 0x0120)
+#define OMAP3630_CONTROL_FUSE_OPP50_VDD2        (OMAP2_CONTROL_GENERAL + 0x0128)
+#define OMAP3630_CONTROL_FUSE_OPP100_VDD2       (OMAP2_CONTROL_GENERAL + 0x012C)
+
+/* OMAP44xx control efuse offsets */
+#define OMAP44XX_CONTROL_FUSE_IVA_OPP50		0x22C
+#define OMAP44XX_CONTROL_FUSE_IVA_OPP100	0x22F
+#define OMAP44XX_CONTROL_FUSE_IVA_OPPTURBO	0x232
+#define OMAP44XX_CONTROL_FUSE_IVA_OPPNITRO	0x235
+#define OMAP44XX_CONTROL_FUSE_MPU_OPP50		0x240
+#define OMAP44XX_CONTROL_FUSE_MPU_OPP100	0x243
+#define OMAP44XX_CONTROL_FUSE_MPU_OPPTURBO	0x246
+#define OMAP44XX_CONTROL_FUSE_MPU_OPPNITRO	0x249
+#define OMAP44XX_CONTROL_FUSE_CORE_OPP50	0x254
+#define OMAP44XX_CONTROL_FUSE_CORE_OPP100	0x257
+
 /* AM35XX only CONTROL_GENERAL register offsets */
 #define AM35XX_CONTROL_MSUSPENDMUX_6    (OMAP2_CONTROL_GENERAL + 0x0038)
 #define AM35XX_CONTROL_DEVCONF2         (OMAP2_CONTROL_GENERAL + 0x0310)

arch/arm/mach-omap2/omap_hwmod_3xxx_data.c

@@ -21,6 +21,7 @@
 #include <plat/l4_3xxx.h>
 #include <plat/i2c.h>
 #include <plat/gpio.h>
+#include <plat/smartreflex.h>
 
 #include "omap_hwmod_common_data.h"
 
@@ -52,6 +53,8 @@ static struct omap_hwmod omap3xxx_gpio3_hwmod;
 static struct omap_hwmod omap3xxx_gpio4_hwmod;
 static struct omap_hwmod omap3xxx_gpio5_hwmod;
 static struct omap_hwmod omap3xxx_gpio6_hwmod;
+static struct omap_hwmod omap34xx_sr1_hwmod;
+static struct omap_hwmod omap34xx_sr2_hwmod;
 
 static struct omap_hwmod omap3xxx_dma_system_hwmod;
 
@@ -262,9 +265,47 @@ static struct omap_hwmod_ocp_if omap3_l4_core__i2c3 = {
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
+/* L4 CORE -> SR1 interface */
+static struct omap_hwmod_addr_space omap3_sr1_addr_space[] = {
+	{
+		.pa_start	= OMAP34XX_SR1_BASE,
+		.pa_end		= OMAP34XX_SR1_BASE + SZ_1K - 1,
+		.flags		= ADDR_TYPE_RT,
+	},
+};
+
+static struct omap_hwmod_ocp_if omap3_l4_core__sr1 = {
+	.master		= &omap3xxx_l4_core_hwmod,
+	.slave		= &omap34xx_sr1_hwmod,
+	.clk		= "sr_l4_ick",
+	.addr		= omap3_sr1_addr_space,
+	.addr_cnt	= ARRAY_SIZE(omap3_sr1_addr_space),
+	.user		= OCP_USER_MPU,
+};
+
+/* L4 CORE -> SR1 interface */
+static struct omap_hwmod_addr_space omap3_sr2_addr_space[] = {
+	{
+		.pa_start	= OMAP34XX_SR2_BASE,
+		.pa_end		= OMAP34XX_SR2_BASE + SZ_1K - 1,
+		.flags		= ADDR_TYPE_RT,
+	},
+};
+
+static struct omap_hwmod_ocp_if omap3_l4_core__sr2 = {
+	.master		= &omap3xxx_l4_core_hwmod,
+	.slave		= &omap34xx_sr2_hwmod,
+	.clk		= "sr_l4_ick",
+	.addr		= omap3_sr2_addr_space,
+	.addr_cnt	= ARRAY_SIZE(omap3_sr2_addr_space),
+	.user		= OCP_USER_MPU,
+};
+
 /* Slave interfaces on the L4_CORE interconnect */
 static struct omap_hwmod_ocp_if *omap3xxx_l4_core_slaves[] = {
 	&omap3xxx_l3_main__l4_core,
+	&omap3_l4_core__sr1,
+	&omap3_l4_core__sr2,
 };
 
 /* Master interfaces on the L4_CORE interconnect */
@@ -1186,6 +1227,135 @@ static struct omap_hwmod omap3xxx_dma_system_hwmod = {
 	.flags		= HWMOD_NO_IDLEST,
 };
 
+/* SR common */
+static struct omap_hwmod_sysc_fields omap34xx_sr_sysc_fields = {
+	.clkact_shift	= 20,
+};
+
+static struct omap_hwmod_class_sysconfig omap34xx_sr_sysc = {
+	.sysc_offs	= 0x24,
+	.sysc_flags	= (SYSC_HAS_CLOCKACTIVITY | SYSC_NO_CACHE),
+	.clockact	= CLOCKACT_TEST_ICLK,
+	.sysc_fields	= &omap34xx_sr_sysc_fields,
+};
+
+static struct omap_hwmod_class omap34xx_smartreflex_hwmod_class = {
+	.name = "smartreflex",
+	.sysc = &omap34xx_sr_sysc,
+	.rev  = 1,
+};
+
+static struct omap_hwmod_sysc_fields omap36xx_sr_sysc_fields = {
+	.sidle_shift	= 24,
+	.enwkup_shift	= 26
+};
+
+static struct omap_hwmod_class_sysconfig omap36xx_sr_sysc = {
+	.sysc_offs	= 0x38,
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
+	.sysc_flags	= (SYSC_HAS_SIDLEMODE | SYSC_HAS_ENAWAKEUP |
+			SYSC_NO_CACHE),
+	.sysc_fields	= &omap36xx_sr_sysc_fields,
+};
+
+static struct omap_hwmod_class omap36xx_smartreflex_hwmod_class = {
+	.name = "smartreflex",
+	.sysc = &omap36xx_sr_sysc,
+	.rev  = 2,
+};
+
+/* SR1 */
+static struct omap_hwmod_ocp_if *omap3_sr1_slaves[] = {
+	&omap3_l4_core__sr1,
+};
+
+static struct omap_hwmod omap34xx_sr1_hwmod = {
+	.name		= "sr1_hwmod",
+	.class		= &omap34xx_smartreflex_hwmod_class,
+	.main_clk	= "sr1_fck",
+	.vdd_name	= "mpu",
+	.prcm		= {
+		.omap2 = {
+			.prcm_reg_id = 1,
+			.module_bit = OMAP3430_EN_SR1_SHIFT,
+			.module_offs = WKUP_MOD,
+			.idlest_reg_id = 1,
+			.idlest_idle_bit = OMAP3430_EN_SR1_SHIFT,
+		},
+	},
+	.slaves		= omap3_sr1_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap3_sr1_slaves),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES2 |
+					CHIP_IS_OMAP3430ES3_0 |
+					CHIP_IS_OMAP3430ES3_1),
+	.flags		= HWMOD_SET_DEFAULT_CLOCKACT,
+};
+
+static struct omap_hwmod omap36xx_sr1_hwmod = {
+	.name		= "sr1_hwmod",
+	.class		= &omap36xx_smartreflex_hwmod_class,
+	.main_clk	= "sr1_fck",
+	.vdd_name	= "mpu",
+	.prcm		= {
+		.omap2 = {
+			.prcm_reg_id = 1,
+			.module_bit = OMAP3430_EN_SR1_SHIFT,
+			.module_offs = WKUP_MOD,
+			.idlest_reg_id = 1,
+			.idlest_idle_bit = OMAP3430_EN_SR1_SHIFT,
+		},
+	},
+	.slaves		= omap3_sr1_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap3_sr1_slaves),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3630ES1),
+};
+
+/* SR2 */
+static struct omap_hwmod_ocp_if *omap3_sr2_slaves[] = {
+	&omap3_l4_core__sr2,
+};
+
+static struct omap_hwmod omap34xx_sr2_hwmod = {
+	.name		= "sr2_hwmod",
+	.class		= &omap34xx_smartreflex_hwmod_class,
+	.main_clk	= "sr2_fck",
+	.vdd_name	= "core",
+	.prcm		= {
+		.omap2 = {
+			.prcm_reg_id = 1,
+			.module_bit = OMAP3430_EN_SR2_SHIFT,
+			.module_offs = WKUP_MOD,
+			.idlest_reg_id = 1,
+			.idlest_idle_bit = OMAP3430_EN_SR2_SHIFT,
+		},
+	},
+	.slaves		= omap3_sr2_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap3_sr2_slaves),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES2 |
+					CHIP_IS_OMAP3430ES3_0 |
+					CHIP_IS_OMAP3430ES3_1),
+	.flags		= HWMOD_SET_DEFAULT_CLOCKACT,
+};
+
+static struct omap_hwmod omap36xx_sr2_hwmod = {
+	.name		= "sr2_hwmod",
+	.class		= &omap36xx_smartreflex_hwmod_class,
+	.main_clk	= "sr2_fck",
+	.vdd_name	= "core",
+	.prcm		= {
+		.omap2 = {
+			.prcm_reg_id = 1,
+			.module_bit = OMAP3430_EN_SR2_SHIFT,
+			.module_offs = WKUP_MOD,
+			.idlest_reg_id = 1,
+			.idlest_idle_bit = OMAP3430_EN_SR2_SHIFT,
+		},
+	},
+	.slaves		= omap3_sr2_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap3_sr2_slaves),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3630ES1),
+};
+
 static __initdata struct omap_hwmod *omap3xxx_hwmods[] = {
 	&omap3xxx_l3_main_hwmod,
 	&omap3xxx_l4_core_hwmod,
@@ -1201,6 +1371,11 @@ static __initdata struct omap_hwmod *omap3xxx_hwmods[] = {
 	&omap3xxx_i2c1_hwmod,
 	&omap3xxx_i2c2_hwmod,
 	&omap3xxx_i2c3_hwmod,
+	&omap34xx_sr1_hwmod,
+	&omap34xx_sr2_hwmod,
+	&omap36xx_sr1_hwmod,
+	&omap36xx_sr2_hwmod,
+
 
 	/* gpio class */
 	&omap3xxx_gpio1_hwmod,

arch/arm/mach-omap2/omap_hwmod_44xx_data.c

@@ -1842,6 +1842,169 @@ static struct omap_hwmod omap44xx_dma_system_hwmod = {
 	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
 };
 
+/*
+ * 'smartreflex' class
+ * smartreflex module (monitor silicon performance and outputs a measure of
+ * performance error)
+ */
+
+/* The IP is not compliant to type1 / type2 scheme */
+static struct omap_hwmod_sysc_fields omap_hwmod_sysc_type_smartreflex = {
+	.sidle_shift	= 24,
+	.enwkup_shift	= 26,
+};
+
+static struct omap_hwmod_class_sysconfig omap44xx_smartreflex_sysc = {
+	.sysc_offs	= 0x0038,
+	.sysc_flags	= (SYSC_HAS_ENAWAKEUP | SYSC_HAS_SIDLEMODE),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
+	.sysc_fields	= &omap_hwmod_sysc_type_smartreflex,
+};
+
+static struct omap_hwmod_class omap44xx_smartreflex_hwmod_class = {
+	.name = "smartreflex",
+	.sysc = &omap44xx_smartreflex_sysc,
+	.rev  = 2,
+};
+
+/* smartreflex_core */
+static struct omap_hwmod omap44xx_smartreflex_core_hwmod;
+static struct omap_hwmod_irq_info omap44xx_smartreflex_core_irqs[] = {
+	{ .irq = 19 + OMAP44XX_IRQ_GIC_START },
+};
+
+static struct omap_hwmod_addr_space omap44xx_smartreflex_core_addrs[] = {
+	{
+		.pa_start	= 0x4a0dd000,
+		.pa_end		= 0x4a0dd03f,
+		.flags		= ADDR_TYPE_RT
+	},
+};
+
+/* l4_cfg -> smartreflex_core */
+static struct omap_hwmod_ocp_if omap44xx_l4_cfg__smartreflex_core = {
+	.master		= &omap44xx_l4_cfg_hwmod,
+	.slave		= &omap44xx_smartreflex_core_hwmod,
+	.clk		= "l4_div_ck",
+	.addr		= omap44xx_smartreflex_core_addrs,
+	.addr_cnt	= ARRAY_SIZE(omap44xx_smartreflex_core_addrs),
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* smartreflex_core slave ports */
+static struct omap_hwmod_ocp_if *omap44xx_smartreflex_core_slaves[] = {
+	&omap44xx_l4_cfg__smartreflex_core,
+};
+
+static struct omap_hwmod omap44xx_smartreflex_core_hwmod = {
+	.name		= "smartreflex_core",
+	.class		= &omap44xx_smartreflex_hwmod_class,
+	.mpu_irqs	= omap44xx_smartreflex_core_irqs,
+	.mpu_irqs_cnt	= ARRAY_SIZE(omap44xx_smartreflex_core_irqs),
+	.main_clk	= "smartreflex_core_fck",
+	.vdd_name	= "core",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_reg = OMAP4430_CM_ALWON_SR_CORE_CLKCTRL,
+		},
+	},
+	.slaves		= omap44xx_smartreflex_core_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap44xx_smartreflex_core_slaves),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+};
+
+/* smartreflex_iva */
+static struct omap_hwmod omap44xx_smartreflex_iva_hwmod;
+static struct omap_hwmod_irq_info omap44xx_smartreflex_iva_irqs[] = {
+	{ .irq = 102 + OMAP44XX_IRQ_GIC_START },
+};
+
+static struct omap_hwmod_addr_space omap44xx_smartreflex_iva_addrs[] = {
+	{
+		.pa_start	= 0x4a0db000,
+		.pa_end		= 0x4a0db03f,
+		.flags		= ADDR_TYPE_RT
+	},
+};
+
+/* l4_cfg -> smartreflex_iva */
+static struct omap_hwmod_ocp_if omap44xx_l4_cfg__smartreflex_iva = {
+	.master		= &omap44xx_l4_cfg_hwmod,
+	.slave		= &omap44xx_smartreflex_iva_hwmod,
+	.clk		= "l4_div_ck",
+	.addr		= omap44xx_smartreflex_iva_addrs,
+	.addr_cnt	= ARRAY_SIZE(omap44xx_smartreflex_iva_addrs),
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* smartreflex_iva slave ports */
+static struct omap_hwmod_ocp_if *omap44xx_smartreflex_iva_slaves[] = {
+	&omap44xx_l4_cfg__smartreflex_iva,
+};
+
+static struct omap_hwmod omap44xx_smartreflex_iva_hwmod = {
+	.name		= "smartreflex_iva",
+	.class		= &omap44xx_smartreflex_hwmod_class,
+	.mpu_irqs	= omap44xx_smartreflex_iva_irqs,
+	.mpu_irqs_cnt	= ARRAY_SIZE(omap44xx_smartreflex_iva_irqs),
+	.main_clk	= "smartreflex_iva_fck",
+	.vdd_name	= "iva",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_reg = OMAP4430_CM_ALWON_SR_IVA_CLKCTRL,
+		},
+	},
+	.slaves		= omap44xx_smartreflex_iva_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap44xx_smartreflex_iva_slaves),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+};
+
+/* smartreflex_mpu */
+static struct omap_hwmod omap44xx_smartreflex_mpu_hwmod;
+static struct omap_hwmod_irq_info omap44xx_smartreflex_mpu_irqs[] = {
+	{ .irq = 18 + OMAP44XX_IRQ_GIC_START },
+};
+
+static struct omap_hwmod_addr_space omap44xx_smartreflex_mpu_addrs[] = {
+	{
+		.pa_start	= 0x4a0d9000,
+		.pa_end		= 0x4a0d903f,
+		.flags		= ADDR_TYPE_RT
+	},
+};
+
+/* l4_cfg -> smartreflex_mpu */
+static struct omap_hwmod_ocp_if omap44xx_l4_cfg__smartreflex_mpu = {
+	.master		= &omap44xx_l4_cfg_hwmod,
+	.slave		= &omap44xx_smartreflex_mpu_hwmod,
+	.clk		= "l4_div_ck",
+	.addr		= omap44xx_smartreflex_mpu_addrs,
+	.addr_cnt	= ARRAY_SIZE(omap44xx_smartreflex_mpu_addrs),
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* smartreflex_mpu slave ports */
+static struct omap_hwmod_ocp_if *omap44xx_smartreflex_mpu_slaves[] = {
+	&omap44xx_l4_cfg__smartreflex_mpu,
+};
+
+static struct omap_hwmod omap44xx_smartreflex_mpu_hwmod = {
+	.name		= "smartreflex_mpu",
+	.class		= &omap44xx_smartreflex_hwmod_class,
+	.mpu_irqs	= omap44xx_smartreflex_mpu_irqs,
+	.mpu_irqs_cnt	= ARRAY_SIZE(omap44xx_smartreflex_mpu_irqs),
+	.main_clk	= "smartreflex_mpu_fck",
+	.vdd_name	= "mpu",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_reg = OMAP4430_CM_ALWON_SR_MPU_CLKCTRL,
+		},
+	},
+	.slaves		= omap44xx_smartreflex_mpu_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap44xx_smartreflex_mpu_slaves),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+};
+
 static __initdata struct omap_hwmod *omap44xx_hwmods[] = {
 	/* dmm class */
 	&omap44xx_dmm_hwmod,
@@ -1903,6 +2066,11 @@ static __initdata struct omap_hwmod *omap44xx_hwmods[] = {
 	&omap44xx_wd_timer2_hwmod,
 	&omap44xx_wd_timer3_hwmod,
 
+	/* smartreflex class */
+	&omap44xx_smartreflex_core_hwmod,
+	&omap44xx_smartreflex_iva_hwmod,
+	&omap44xx_smartreflex_mpu_hwmod,
+
 	NULL,
 };
 

arch/arm/mach-omap2/omap_twl.c

@@ -0,0 +1,277 @@
+/**
+ * OMAP and TWL PMIC specific intializations.
+ *
+ * Copyright (C) 2010 Texas Instruments Incorporated.
+ * Thara Gopinath
+ * Copyright (C) 2009 Texas Instruments Incorporated.
+ * Nishanth Menon
+ * Copyright (C) 2009 Nokia Corporation
+ * Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/i2c/twl.h>
+
+#include <plat/voltage.h>
+
+#define OMAP3_SRI2C_SLAVE_ADDR		0x12
+#define OMAP3_VDD_MPU_SR_CONTROL_REG	0x00
+#define OMAP3_VDD_CORE_SR_CONTROL_REG	0x01
+#define OMAP3_VP_CONFIG_ERROROFFSET	0x00
+#define OMAP3_VP_VSTEPMIN_VSTEPMIN	0x1
+#define OMAP3_VP_VSTEPMAX_VSTEPMAX	0x04
+#define OMAP3_VP_VLIMITTO_TIMEOUT_US	200
+
+#define OMAP3430_VP1_VLIMITTO_VDDMIN	0x14
+#define OMAP3430_VP1_VLIMITTO_VDDMAX	0x42
+#define OMAP3430_VP2_VLIMITTO_VDDMIN	0x18
+#define OMAP3430_VP2_VLIMITTO_VDDMAX	0x2c
+
+#define OMAP3630_VP1_VLIMITTO_VDDMIN	0x18
+#define OMAP3630_VP1_VLIMITTO_VDDMAX	0x3c
+#define OMAP3630_VP2_VLIMITTO_VDDMIN	0x18
+#define OMAP3630_VP2_VLIMITTO_VDDMAX	0x30
+
+#define OMAP4_SRI2C_SLAVE_ADDR		0x12
+#define OMAP4_VDD_MPU_SR_VOLT_REG	0x55
+#define OMAP4_VDD_IVA_SR_VOLT_REG	0x5B
+#define OMAP4_VDD_CORE_SR_VOLT_REG	0x61
+
+#define OMAP4_VP_CONFIG_ERROROFFSET	0x00
+#define OMAP4_VP_VSTEPMIN_VSTEPMIN	0x01
+#define OMAP4_VP_VSTEPMAX_VSTEPMAX	0x04
+#define OMAP4_VP_VLIMITTO_TIMEOUT_US	200
+
+#define OMAP4_VP_MPU_VLIMITTO_VDDMIN	0xA
+#define OMAP4_VP_MPU_VLIMITTO_VDDMAX	0x39
+#define OMAP4_VP_IVA_VLIMITTO_VDDMIN	0xA
+#define OMAP4_VP_IVA_VLIMITTO_VDDMAX	0x2D
+#define OMAP4_VP_CORE_VLIMITTO_VDDMIN	0xA
+#define OMAP4_VP_CORE_VLIMITTO_VDDMAX	0x28
+
+static bool is_offset_valid;
+static u8 smps_offset;
+
+#define REG_SMPS_OFFSET         0xE0
+
+unsigned long twl4030_vsel_to_uv(const u8 vsel)
+{
+	return (((vsel * 125) + 6000)) * 100;
+}
+
+u8 twl4030_uv_to_vsel(unsigned long uv)
+{
+	return DIV_ROUND_UP(uv - 600000, 12500);
+}
+
+unsigned long twl6030_vsel_to_uv(const u8 vsel)
+{
+	/*
+	 * In TWL6030 depending on the value of SMPS_OFFSET
+	 * efuse register the voltage range supported in
+	 * standard mode can be either between 0.6V - 1.3V or
+	 * 0.7V - 1.4V. In TWL6030 ES1.0 SMPS_OFFSET efuse
+	 * is programmed to all 0's where as starting from
+	 * TWL6030 ES1.1 the efuse is programmed to 1
+	 */
+	if (!is_offset_valid) {
+		twl_i2c_read_u8(TWL6030_MODULE_ID0, &smps_offset,
+				REG_SMPS_OFFSET);
+		is_offset_valid = true;
+	}
+
+	/*
+	 * There is no specific formula for voltage to vsel
+	 * conversion above 1.3V. There are special hardcoded
+	 * values for voltages above 1.3V. Currently we are
+	 * hardcoding only for 1.35 V which is used for 1GH OPP for
+	 * OMAP4430.
+	 */
+	if (vsel == 0x3A)
+		return 1350000;
+
+	if (smps_offset & 0x8)
+		return ((((vsel - 1) * 125) + 7000)) * 100;
+	else
+		return ((((vsel - 1) * 125) + 6000)) * 100;
+}
+
+u8 twl6030_uv_to_vsel(unsigned long uv)
+{
+	/*
+	 * In TWL6030 depending on the value of SMPS_OFFSET
+	 * efuse register the voltage range supported in
+	 * standard mode can be either between 0.6V - 1.3V or
+	 * 0.7V - 1.4V. In TWL6030 ES1.0 SMPS_OFFSET efuse
+	 * is programmed to all 0's where as starting from
+	 * TWL6030 ES1.1 the efuse is programmed to 1
+	 */
+	if (!is_offset_valid) {
+		twl_i2c_read_u8(TWL6030_MODULE_ID0, &smps_offset,
+				REG_SMPS_OFFSET);
+		is_offset_valid = true;
+	}
+
+	/*
+	 * There is no specific formula for voltage to vsel
+	 * conversion above 1.3V. There are special hardcoded
+	 * values for voltages above 1.3V. Currently we are
+	 * hardcoding only for 1.35 V which is used for 1GH OPP for
+	 * OMAP4430.
+	 */
+	if (uv == 1350000)
+		return 0x3A;
+
+	if (smps_offset & 0x8)
+		return DIV_ROUND_UP(uv - 700000, 12500) + 1;
+	else
+		return DIV_ROUND_UP(uv - 600000, 12500) + 1;
+}
+
+static struct omap_volt_pmic_info omap3_mpu_volt_info = {
+	.slew_rate		= 4000,
+	.step_size		= 12500,
+	.on_volt		= 1200000,
+	.onlp_volt		= 1000000,
+	.ret_volt		= 975000,
+	.off_volt		= 600000,
+	.volt_setup_time	= 0xfff,
+	.vp_erroroffset		= OMAP3_VP_CONFIG_ERROROFFSET,
+	.vp_vstepmin		= OMAP3_VP_VSTEPMIN_VSTEPMIN,
+	.vp_vstepmax		= OMAP3_VP_VSTEPMAX_VSTEPMAX,
+	.vp_vddmin		= OMAP3430_VP1_VLIMITTO_VDDMIN,
+	.vp_vddmax		= OMAP3430_VP1_VLIMITTO_VDDMAX,
+	.vp_timeout_us		= OMAP3_VP_VLIMITTO_TIMEOUT_US,
+	.i2c_slave_addr		= OMAP3_SRI2C_SLAVE_ADDR,
+	.pmic_reg		= OMAP3_VDD_MPU_SR_CONTROL_REG,
+	.vsel_to_uv		= twl4030_vsel_to_uv,
+	.uv_to_vsel		= twl4030_uv_to_vsel,
+};
+
+static struct omap_volt_pmic_info omap3_core_volt_info = {
+	.slew_rate		= 4000,
+	.step_size		= 12500,
+	.on_volt                = 1200000,
+	.onlp_volt              = 1000000,
+	.ret_volt               = 975000,
+	.off_volt               = 600000,
+	.volt_setup_time        = 0xfff,
+	.vp_erroroffset		= OMAP3_VP_CONFIG_ERROROFFSET,
+	.vp_vstepmin		= OMAP3_VP_VSTEPMIN_VSTEPMIN,
+	.vp_vstepmax		= OMAP3_VP_VSTEPMAX_VSTEPMAX,
+	.vp_vddmin		= OMAP3430_VP2_VLIMITTO_VDDMIN,
+	.vp_vddmax		= OMAP3430_VP2_VLIMITTO_VDDMAX,
+	.vp_timeout_us		= OMAP3_VP_VLIMITTO_TIMEOUT_US,
+	.i2c_slave_addr		= OMAP3_SRI2C_SLAVE_ADDR,
+	.pmic_reg		= OMAP3_VDD_CORE_SR_CONTROL_REG,
+	.vsel_to_uv		= twl4030_vsel_to_uv,
+	.uv_to_vsel		= twl4030_uv_to_vsel,
+};
+
+static struct omap_volt_pmic_info omap4_mpu_volt_info = {
+	.slew_rate		= 4000,
+	.step_size		= 12500,
+	.on_volt		= 1350000,
+	.onlp_volt		= 1350000,
+	.ret_volt		= 837500,
+	.off_volt		= 600000,
+	.volt_setup_time	= 0,
+	.vp_erroroffset		= OMAP4_VP_CONFIG_ERROROFFSET,
+	.vp_vstepmin		= OMAP4_VP_VSTEPMIN_VSTEPMIN,
+	.vp_vstepmax		= OMAP4_VP_VSTEPMAX_VSTEPMAX,
+	.vp_vddmin		= OMAP4_VP_MPU_VLIMITTO_VDDMIN,
+	.vp_vddmax		= OMAP4_VP_MPU_VLIMITTO_VDDMAX,
+	.vp_timeout_us		= OMAP4_VP_VLIMITTO_TIMEOUT_US,
+	.i2c_slave_addr		= OMAP4_SRI2C_SLAVE_ADDR,
+	.pmic_reg		= OMAP4_VDD_MPU_SR_VOLT_REG,
+	.vsel_to_uv		= twl6030_vsel_to_uv,
+	.uv_to_vsel		= twl6030_uv_to_vsel,
+};
+
+static struct omap_volt_pmic_info omap4_iva_volt_info = {
+	.slew_rate		= 4000,
+	.step_size		= 12500,
+	.on_volt		= 1100000,
+	.onlp_volt		= 1100000,
+	.ret_volt		= 837500,
+	.off_volt		= 600000,
+	.volt_setup_time	= 0,
+	.vp_erroroffset		= OMAP4_VP_CONFIG_ERROROFFSET,
+	.vp_vstepmin		= OMAP4_VP_VSTEPMIN_VSTEPMIN,
+	.vp_vstepmax		= OMAP4_VP_VSTEPMAX_VSTEPMAX,
+	.vp_vddmin		= OMAP4_VP_IVA_VLIMITTO_VDDMIN,
+	.vp_vddmax		= OMAP4_VP_IVA_VLIMITTO_VDDMAX,
+	.vp_timeout_us		= OMAP4_VP_VLIMITTO_TIMEOUT_US,
+	.i2c_slave_addr		= OMAP4_SRI2C_SLAVE_ADDR,
+	.pmic_reg		= OMAP4_VDD_IVA_SR_VOLT_REG,
+	.vsel_to_uv		= twl6030_vsel_to_uv,
+	.uv_to_vsel		= twl6030_uv_to_vsel,
+};
+
+static struct omap_volt_pmic_info omap4_core_volt_info = {
+	.slew_rate		= 4000,
+	.step_size		= 12500,
+	.on_volt		= 1100000,
+	.onlp_volt		= 1100000,
+	.ret_volt		= 837500,
+	.off_volt		= 600000,
+	.volt_setup_time	= 0,
+	.vp_erroroffset		= OMAP4_VP_CONFIG_ERROROFFSET,
+	.vp_vstepmin		= OMAP4_VP_VSTEPMIN_VSTEPMIN,
+	.vp_vstepmax		= OMAP4_VP_VSTEPMAX_VSTEPMAX,
+	.vp_vddmin		= OMAP4_VP_CORE_VLIMITTO_VDDMIN,
+	.vp_vddmax		= OMAP4_VP_CORE_VLIMITTO_VDDMAX,
+	.vp_timeout_us		= OMAP4_VP_VLIMITTO_TIMEOUT_US,
+	.i2c_slave_addr		= OMAP4_SRI2C_SLAVE_ADDR,
+	.pmic_reg		= OMAP4_VDD_CORE_SR_VOLT_REG,
+	.vsel_to_uv		= twl6030_vsel_to_uv,
+	.uv_to_vsel		= twl6030_uv_to_vsel,
+};
+
+int __init omap4_twl_init(void)
+{
+	struct voltagedomain *voltdm;
+
+	if (!cpu_is_omap44xx())
+		return -ENODEV;
+
+	voltdm = omap_voltage_domain_lookup("mpu");
+	omap_voltage_register_pmic(voltdm, &omap4_mpu_volt_info);
+
+	voltdm = omap_voltage_domain_lookup("iva");
+	omap_voltage_register_pmic(voltdm, &omap4_iva_volt_info);
+
+	voltdm = omap_voltage_domain_lookup("core");
+	omap_voltage_register_pmic(voltdm, &omap4_core_volt_info);
+
+	return 0;
+}
+
+int __init omap3_twl_init(void)
+{
+	struct voltagedomain *voltdm;
+
+	if (!cpu_is_omap34xx())
+		return -ENODEV;
+
+	if (cpu_is_omap3630()) {
+		omap3_mpu_volt_info.vp_vddmin = OMAP3630_VP1_VLIMITTO_VDDMIN;
+		omap3_mpu_volt_info.vp_vddmax = OMAP3630_VP1_VLIMITTO_VDDMAX;
+		omap3_core_volt_info.vp_vddmin = OMAP3630_VP2_VLIMITTO_VDDMIN;
+		omap3_core_volt_info.vp_vddmax = OMAP3630_VP2_VLIMITTO_VDDMAX;
+	}
+
+	voltdm = omap_voltage_domain_lookup("mpu");
+	omap_voltage_register_pmic(voltdm, &omap3_mpu_volt_info);
+
+	voltdm = omap_voltage_domain_lookup("core");
+	omap_voltage_register_pmic(voltdm, &omap3_core_volt_info);
+
+	return 0;
+}

arch/arm/mach-omap2/pm.c

@@ -13,13 +13,16 @@
 #include <linux/init.h>
 #include <linux/io.h>
 #include <linux/err.h>
+#include <linux/opp.h>
 
 #include <plat/omap-pm.h>
 #include <plat/omap_device.h>
 #include <plat/common.h>
+#include <plat/voltage.h>
 
 #include "powerdomain.h"
 #include "clockdomain.h"
+#include "pm.h"
 
 static struct omap_device_pm_latency *pm_lats;
 
@@ -154,6 +157,86 @@ err:
 	return ret;
 }
 
+/*
+ * This API is to be called during init to put the various voltage
+ * domains to the voltage as per the opp table. Typically we boot up
+ * at the nominal voltage. So this function finds out the rate of
+ * the clock associated with the voltage domain, finds out the correct
+ * opp entry and puts the voltage domain to the voltage specifies
+ * in the opp entry
+ */
+static int __init omap2_set_init_voltage(char *vdd_name, char *clk_name,
+						struct device *dev)
+{
+	struct voltagedomain *voltdm;
+	struct clk *clk;
+	struct opp *opp;
+	unsigned long freq, bootup_volt;
+
+	if (!vdd_name || !clk_name || !dev) {
+		printk(KERN_ERR "%s: Invalid parameters!\n", __func__);
+		goto exit;
+	}
+
+	voltdm = omap_voltage_domain_lookup(vdd_name);
+	if (IS_ERR(voltdm)) {
+		printk(KERN_ERR "%s: Unable to get vdd pointer for vdd_%s\n",
+			__func__, vdd_name);
+		goto exit;
+	}
+
+	clk =  clk_get(NULL, clk_name);
+	if (IS_ERR(clk)) {
+		printk(KERN_ERR "%s: unable to get clk %s\n",
+			__func__, clk_name);
+		goto exit;
+	}
+
+	freq = clk->rate;
+	clk_put(clk);
+
+	opp = opp_find_freq_ceil(dev, &freq);
+	if (IS_ERR(opp)) {
+		printk(KERN_ERR "%s: unable to find boot up OPP for vdd_%s\n",
+			__func__, vdd_name);
+		goto exit;
+	}
+
+	bootup_volt = opp_get_voltage(opp);
+	if (!bootup_volt) {
+		printk(KERN_ERR "%s: unable to find voltage corresponding"
+			"to the bootup OPP for vdd_%s\n", __func__, vdd_name);
+		goto exit;
+	}
+
+	omap_voltage_scale_vdd(voltdm, bootup_volt);
+	return 0;
+
+exit:
+	printk(KERN_ERR "%s: Unable to put vdd_%s to its init voltage\n\n",
+		__func__, vdd_name);
+	return -EINVAL;
+}
+
+static void __init omap3_init_voltages(void)
+{
+	if (!cpu_is_omap34xx())
+		return;
+
+	omap2_set_init_voltage("mpu", "dpll1_ck", mpu_dev);
+	omap2_set_init_voltage("core", "l3_ick", l3_dev);
+}
+
+static void __init omap4_init_voltages(void)
+{
+	if (!cpu_is_omap44xx())
+		return;
+
+	omap2_set_init_voltage("mpu", "dpll_mpu_ck", mpu_dev);
+	omap2_set_init_voltage("core", "l3_div_ck", l3_dev);
+	omap2_set_init_voltage("iva", "dpll_iva_m5x2_ck", iva_dev);
+}
+
 static int __init omap2_common_pm_init(void)
 {
 	omap2_init_processor_devices();
@@ -163,3 +246,22 @@ static int __init omap2_common_pm_init(void)
 }
 postcore_initcall(omap2_common_pm_init);
 
+static int __init omap2_common_pm_late_init(void)
+{
+	/* Init the OMAP TWL parameters */
+	omap3_twl_init();
+	omap4_twl_init();
+
+	/* Init the voltage layer */
+	omap_voltage_late_init();
+
+	/* Initialize the voltages */
+	omap3_init_voltages();
+	omap4_init_voltages();
+
+	/* Smartreflex device init */
+	omap_devinit_smartreflex();
+
+	return 0;
+}
+late_initcall(omap2_common_pm_late_init);

arch/arm/mach-omap2/pm.h

@@ -11,6 +11,8 @@
 #ifndef __ARCH_ARM_MACH_OMAP2_PM_H
 #define __ARCH_ARM_MACH_OMAP2_PM_H
 
+#include <linux/err.h>
+
 #include "powerdomain.h"
 
 extern void *omap3_secure_ram_storage;
@@ -110,4 +112,30 @@ extern void enable_omap3630_toggle_l2_on_restore(void);
 static inline void enable_omap3630_toggle_l2_on_restore(void) { }
 #endif		/* defined(CONFIG_PM) && defined(CONFIG_ARCH_OMAP3) */
 
+#ifdef CONFIG_OMAP_SMARTREFLEX
+extern int omap_devinit_smartreflex(void);
+extern void omap_enable_smartreflex_on_init(void);
+#else
+static inline int omap_devinit_smartreflex(void)
+{
+	return -EINVAL;
+}
+
+static inline void omap_enable_smartreflex_on_init(void) {}
+#endif
+
+#ifdef CONFIG_TWL4030_CORE
+extern int omap3_twl_init(void);
+extern int omap4_twl_init(void);
+#else
+static inline int omap3_twl_init(void)
+{
+	return -EINVAL;
+}
+static inline int omap4_twl_init(void)
+{
+	return -EINVAL;
+}
+#endif
+
 #endif

arch/arm/mach-omap2/smartreflex-class3.c

@@ -0,0 +1,59 @@
+/*
+ * Smart reflex Class 3 specific implementations
+ *
+ * Author: Thara Gopinath       <thara@ti.com>
+ *
+ * Copyright (C) 2010 Texas Instruments, Inc.
+ * Thara Gopinath <thara@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <plat/smartreflex.h>
+
+static int sr_class3_enable(struct voltagedomain *voltdm)
+{
+	unsigned long volt = omap_voltage_get_nom_volt(voltdm);
+
+	if (!volt) {
+		pr_warning("%s: Curr voltage unknown. Cannot enable sr_%s\n",
+				__func__, voltdm->name);
+		return -ENODATA;
+	}
+
+	omap_vp_enable(voltdm);
+	return sr_enable(voltdm, volt);
+}
+
+static int sr_class3_disable(struct voltagedomain *voltdm, int is_volt_reset)
+{
+	omap_vp_disable(voltdm);
+	sr_disable(voltdm);
+	if (is_volt_reset)
+		omap_voltage_reset(voltdm);
+
+	return 0;
+}
+
+static int sr_class3_configure(struct voltagedomain *voltdm)
+{
+	return sr_configure_errgen(voltdm);
+}
+
+/* SR class3 structure */
+static struct omap_sr_class_data class3_data = {
+	.enable = sr_class3_enable,
+	.disable = sr_class3_disable,
+	.configure = sr_class3_configure,
+	.class_type = SR_CLASS3,
+};
+
+/* Smartreflex Class3 init API to be called from board file */
+static int __init sr_class3_init(void)
+{
+	pr_info("SmartReflex Class3 initialized\n");
+	return sr_register_class(&class3_data);
+}
+late_initcall(sr_class3_init);

arch/arm/mach-omap2/smartreflex.c

@@ -0,0 +1,1029 @@
+/*
+ * OMAP SmartReflex Voltage Control
+ *
+ * Author: Thara Gopinath	<thara@ti.com>
+ *
+ * Copyright (C) 2010 Texas Instruments, Inc.
+ * Thara Gopinath <thara@ti.com>
+ *
+ * Copyright (C) 2008 Nokia Corporation
+ * Kalle Jokiniemi
+ *
+ * Copyright (C) 2007 Texas Instruments, Inc.
+ * Lesly A M <x0080970@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/interrupt.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/debugfs.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/pm_runtime.h>
+
+#include <plat/common.h>
+#include <plat/smartreflex.h>
+
+#include "pm.h"
+
+#define SMARTREFLEX_NAME_LEN	16
+#define NVALUE_NAME_LEN		40
+#define SR_DISABLE_TIMEOUT	200
+
+struct omap_sr {
+	int				srid;
+	int				ip_type;
+	int				nvalue_count;
+	bool				autocomp_active;
+	u32				clk_length;
+	u32				err_weight;
+	u32				err_minlimit;
+	u32				err_maxlimit;
+	u32				accum_data;
+	u32				senn_avgweight;
+	u32				senp_avgweight;
+	u32				senp_mod;
+	u32				senn_mod;
+	unsigned int			irq;
+	void __iomem			*base;
+	struct platform_device		*pdev;
+	struct list_head		node;
+	struct omap_sr_nvalue_table	*nvalue_table;
+	struct voltagedomain		*voltdm;
+};
+
+/* sr_list contains all the instances of smartreflex module */
+static LIST_HEAD(sr_list);
+
+static struct omap_sr_class_data *sr_class;
+static struct omap_sr_pmic_data *sr_pmic_data;
+
+static inline void sr_write_reg(struct omap_sr *sr, unsigned offset, u32 value)
+{
+	__raw_writel(value, (sr->base + offset));
+}
+
+static inline void sr_modify_reg(struct omap_sr *sr, unsigned offset, u32 mask,
+					u32 value)
+{
+	u32 reg_val;
+	u32 errconfig_offs = 0, errconfig_mask = 0;
+
+	reg_val = __raw_readl(sr->base + offset);
+	reg_val &= ~mask;
+
+	/*
+	 * Smartreflex error config register is special as it contains
+	 * certain status bits which if written a 1 into means a clear
+	 * of those bits. So in order to make sure no accidental write of
+	 * 1 happens to those status bits, do a clear of them in the read
+	 * value. This mean this API doesn't rewrite values in these bits
+	 * if they are currently set, but does allow the caller to write
+	 * those bits.
+	 */
+	if (sr->ip_type == SR_TYPE_V1) {
+		errconfig_offs = ERRCONFIG_V1;
+		errconfig_mask = ERRCONFIG_STATUS_V1_MASK;
+	} else if (sr->ip_type == SR_TYPE_V2) {
+		errconfig_offs = ERRCONFIG_V2;
+		errconfig_mask = ERRCONFIG_VPBOUNDINTST_V2;
+	}
+
+	if (offset == errconfig_offs)
+		reg_val &= ~errconfig_mask;
+
+	reg_val |= value;
+
+	__raw_writel(reg_val, (sr->base + offset));
+}
+
+static inline u32 sr_read_reg(struct omap_sr *sr, unsigned offset)
+{
+	return __raw_readl(sr->base + offset);
+}
+
+static struct omap_sr *_sr_lookup(struct voltagedomain *voltdm)
+{
+	struct omap_sr *sr_info;
+
+	if (!voltdm) {
+		pr_err("%s: Null voltage domain passed!\n", __func__);
+		return ERR_PTR(-EINVAL);
+	}
+
+	list_for_each_entry(sr_info, &sr_list, node) {
+		if (voltdm == sr_info->voltdm)
+			return sr_info;
+	}
+
+	return ERR_PTR(-ENODATA);
+}
+
+static irqreturn_t sr_interrupt(int irq, void *data)
+{
+	struct omap_sr *sr_info = (struct omap_sr *)data;
+	u32 status = 0;
+
+	if (sr_info->ip_type == SR_TYPE_V1) {
+		/* Read the status bits */
+		status = sr_read_reg(sr_info, ERRCONFIG_V1);
+
+		/* Clear them by writing back */
+		sr_write_reg(sr_info, ERRCONFIG_V1, status);
+	} else if (sr_info->ip_type == SR_TYPE_V2) {
+		/* Read the status bits */
+		sr_read_reg(sr_info, IRQSTATUS);
+
+		/* Clear them by writing back */
+		sr_write_reg(sr_info, IRQSTATUS, status);
+	}
+
+	if (sr_class->class_type == SR_CLASS2 && sr_class->notify)
+		sr_class->notify(sr_info->voltdm, status);
+
+	return IRQ_HANDLED;
+}
+
+static void sr_set_clk_length(struct omap_sr *sr)
+{
+	struct clk *sys_ck;
+	u32 sys_clk_speed;
+
+	if (cpu_is_omap34xx())
+		sys_ck = clk_get(NULL, "sys_ck");
+	else
+		sys_ck = clk_get(NULL, "sys_clkin_ck");
+
+	if (IS_ERR(sys_ck)) {
+		dev_err(&sr->pdev->dev, "%s: unable to get sys clk\n",
+			__func__);
+		return;
+	}
+	sys_clk_speed = clk_get_rate(sys_ck);
+	clk_put(sys_ck);
+
+	switch (sys_clk_speed) {
+	case 12000000:
+		sr->clk_length = SRCLKLENGTH_12MHZ_SYSCLK;
+		break;
+	case 13000000:
+		sr->clk_length = SRCLKLENGTH_13MHZ_SYSCLK;
+		break;
+	case 19200000:
+		sr->clk_length = SRCLKLENGTH_19MHZ_SYSCLK;
+		break;
+	case 26000000:
+		sr->clk_length = SRCLKLENGTH_26MHZ_SYSCLK;
+		break;
+	case 38400000:
+		sr->clk_length = SRCLKLENGTH_38MHZ_SYSCLK;
+		break;
+	default:
+		dev_err(&sr->pdev->dev, "%s: Invalid sysclk value: %d\n",
+			__func__, sys_clk_speed);
+		break;
+	}
+}
+
+static void sr_set_regfields(struct omap_sr *sr)
+{
+	/*
+	 * For time being these values are defined in smartreflex.h
+	 * and populated during init. May be they can be moved to board
+	 * file or pmic specific data structure. In that case these structure
+	 * fields will have to be populated using the pdata or pmic structure.
+	 */
+	if (cpu_is_omap34xx() || cpu_is_omap44xx()) {
+		sr->err_weight = OMAP3430_SR_ERRWEIGHT;
+		sr->err_maxlimit = OMAP3430_SR_ERRMAXLIMIT;
+		sr->accum_data = OMAP3430_SR_ACCUMDATA;
+		if (!(strcmp(sr->voltdm->name, "mpu"))) {
+			sr->senn_avgweight = OMAP3430_SR1_SENNAVGWEIGHT;
+			sr->senp_avgweight = OMAP3430_SR1_SENPAVGWEIGHT;
+		} else {
+			sr->senn_avgweight = OMAP3430_SR2_SENNAVGWEIGHT;
+			sr->senp_avgweight = OMAP3430_SR2_SENPAVGWEIGHT;
+		}
+	}
+}
+
+static void sr_start_vddautocomp(struct omap_sr *sr)
+{
+	if (!sr_class || !(sr_class->enable) || !(sr_class->configure)) {
+		dev_warn(&sr->pdev->dev,
+			"%s: smartreflex class driver not registered\n",
+			__func__);
+		return;
+	}
+
+	if (!sr_class->enable(sr->voltdm))
+		sr->autocomp_active = true;
+}
+
+static void sr_stop_vddautocomp(struct omap_sr *sr)
+{
+	if (!sr_class || !(sr_class->disable)) {
+		dev_warn(&sr->pdev->dev,
+			"%s: smartreflex class driver not registered\n",
+			__func__);
+		return;
+	}
+
+	if (sr->autocomp_active) {
+		sr_class->disable(sr->voltdm, 1);
+		sr->autocomp_active = false;
+	}
+}
+
+/*
+ * This function handles the intializations which have to be done
+ * only when both sr device and class driver regiter has
+ * completed. This will be attempted to be called from both sr class
+ * driver register and sr device intializtion API's. Only one call
+ * will ultimately succeed.
+ *
+ * Currenly this function registers interrrupt handler for a particular SR
+ * if smartreflex class driver is already registered and has
+ * requested for interrupts and the SR interrupt line in present.
+ */
+static int sr_late_init(struct omap_sr *sr_info)
+{
+	char *name;
+	struct omap_sr_data *pdata = sr_info->pdev->dev.platform_data;
+	struct resource *mem;
+	int ret = 0;
+
+	if (sr_class->class_type == SR_CLASS2 &&
+		sr_class->notify_flags && sr_info->irq) {
+
+		name = kzalloc(SMARTREFLEX_NAME_LEN + 1, GFP_KERNEL);
+		strcpy(name, "sr_");
+		strcat(name, sr_info->voltdm->name);
+		ret = request_irq(sr_info->irq, sr_interrupt,
+				0, name, (void *)sr_info);
+		if (ret)
+			goto error;
+	}
+
+	if (pdata && pdata->enable_on_init)
+		sr_start_vddautocomp(sr_info);
+
+	return ret;
+
+error:
+		iounmap(sr_info->base);
+		mem = platform_get_resource(sr_info->pdev, IORESOURCE_MEM, 0);
+		release_mem_region(mem->start, resource_size(mem));
+		list_del(&sr_info->node);
+		dev_err(&sr_info->pdev->dev, "%s: ERROR in registering"
+			"interrupt handler. Smartreflex will"
+			"not function as desired\n", __func__);
+		kfree(sr_info);
+		return ret;
+}
+
+static void sr_v1_disable(struct omap_sr *sr)
+{
+	int timeout = 0;
+
+	/* Enable MCUDisableAcknowledge interrupt */
+	sr_modify_reg(sr, ERRCONFIG_V1,
+			ERRCONFIG_MCUDISACKINTEN, ERRCONFIG_MCUDISACKINTEN);
+
+	/* SRCONFIG - disable SR */
+	sr_modify_reg(sr, SRCONFIG, SRCONFIG_SRENABLE, 0x0);
+
+	/* Disable all other SR interrupts and clear the status */
+	sr_modify_reg(sr, ERRCONFIG_V1,
+			(ERRCONFIG_MCUACCUMINTEN | ERRCONFIG_MCUVALIDINTEN |
+			ERRCONFIG_MCUBOUNDINTEN | ERRCONFIG_VPBOUNDINTEN_V1),
+			(ERRCONFIG_MCUACCUMINTST | ERRCONFIG_MCUVALIDINTST |
+			ERRCONFIG_MCUBOUNDINTST |
+			ERRCONFIG_VPBOUNDINTST_V1));
+
+	/*
+	 * Wait for SR to be disabled.
+	 * wait until ERRCONFIG.MCUDISACKINTST = 1. Typical latency is 1us.
+	 */
+	omap_test_timeout((sr_read_reg(sr, ERRCONFIG_V1) &
+			ERRCONFIG_MCUDISACKINTST), SR_DISABLE_TIMEOUT,
+			timeout);
+
+	if (timeout >= SR_DISABLE_TIMEOUT)
+		dev_warn(&sr->pdev->dev, "%s: Smartreflex disable timedout\n",
+			__func__);
+
+	/* Disable MCUDisableAcknowledge interrupt & clear pending interrupt */
+	sr_modify_reg(sr, ERRCONFIG_V1, ERRCONFIG_MCUDISACKINTEN,
+			ERRCONFIG_MCUDISACKINTST);
+}
+
+static void sr_v2_disable(struct omap_sr *sr)
+{
+	int timeout = 0;
+
+	/* Enable MCUDisableAcknowledge interrupt */
+	sr_write_reg(sr, IRQENABLE_SET, IRQENABLE_MCUDISABLEACKINT);
+
+	/* SRCONFIG - disable SR */
+	sr_modify_reg(sr, SRCONFIG, SRCONFIG_SRENABLE, 0x0);
+
+	/* Disable all other SR interrupts and clear the status */
+	sr_modify_reg(sr, ERRCONFIG_V2, ERRCONFIG_VPBOUNDINTEN_V2,
+			ERRCONFIG_VPBOUNDINTST_V2);
+	sr_write_reg(sr, IRQENABLE_CLR, (IRQENABLE_MCUACCUMINT |
+			IRQENABLE_MCUVALIDINT |
+			IRQENABLE_MCUBOUNDSINT));
+	sr_write_reg(sr, IRQSTATUS, (IRQSTATUS_MCUACCUMINT |
+			IRQSTATUS_MCVALIDINT |
+			IRQSTATUS_MCBOUNDSINT));
+
+	/*
+	 * Wait for SR to be disabled.
+	 * wait until IRQSTATUS.MCUDISACKINTST = 1. Typical latency is 1us.
+	 */
+	omap_test_timeout((sr_read_reg(sr, IRQSTATUS) &
+			IRQSTATUS_MCUDISABLEACKINT), SR_DISABLE_TIMEOUT,
+			timeout);
+
+	if (timeout >= SR_DISABLE_TIMEOUT)
+		dev_warn(&sr->pdev->dev, "%s: Smartreflex disable timedout\n",
+			__func__);
+
+	/* Disable MCUDisableAcknowledge interrupt & clear pending interrupt */
+	sr_write_reg(sr, IRQENABLE_CLR, IRQENABLE_MCUDISABLEACKINT);
+	sr_write_reg(sr, IRQSTATUS, IRQSTATUS_MCUDISABLEACKINT);
+}
+
+static u32 sr_retrieve_nvalue(struct omap_sr *sr, u32 efuse_offs)
+{
+	int i;
+
+	if (!sr->nvalue_table) {
+		dev_warn(&sr->pdev->dev, "%s: Missing ntarget value table\n",
+			__func__);
+		return 0;
+	}
+
+	for (i = 0; i < sr->nvalue_count; i++) {
+		if (sr->nvalue_table[i].efuse_offs == efuse_offs)
+			return sr->nvalue_table[i].nvalue;
+	}
+
+	return 0;
+}
+
+/* Public Functions */
+
+/**
+ * sr_configure_errgen() - Configures the smrtreflex to perform AVS using the
+ *			 error generator module.
+ * @voltdm:	VDD pointer to which the SR module to be configured belongs to.
+ *
+ * This API is to be called from the smartreflex class driver to
+ * configure the error generator module inside the smartreflex module.
+ * SR settings if using the ERROR module inside Smartreflex.
+ * SR CLASS 3 by default uses only the ERROR module where as
+ * SR CLASS 2 can choose between ERROR module and MINMAXAVG
+ * module. Returns 0 on success and error value in case of failure.
+ */
+int sr_configure_errgen(struct voltagedomain *voltdm)
+{
+	u32 sr_config, sr_errconfig, errconfig_offs, vpboundint_en;
+	u32 vpboundint_st, senp_en = 0, senn_en = 0;
+	u8 senp_shift, senn_shift;
+	struct omap_sr *sr = _sr_lookup(voltdm);
+
+	if (IS_ERR(sr)) {
+		pr_warning("%s: omap_sr struct for sr_%s not found\n",
+			__func__, voltdm->name);
+		return -EINVAL;
+	}
+
+	if (!sr->clk_length)
+		sr_set_clk_length(sr);
+
+	senp_en = sr->senp_mod;
+	senn_en = sr->senn_mod;
+
+	sr_config = (sr->clk_length << SRCONFIG_SRCLKLENGTH_SHIFT) |
+		SRCONFIG_SENENABLE | SRCONFIG_ERRGEN_EN;
+
+	if (sr->ip_type == SR_TYPE_V1) {
+		sr_config |= SRCONFIG_DELAYCTRL;
+		senn_shift = SRCONFIG_SENNENABLE_V1_SHIFT;
+		senp_shift = SRCONFIG_SENPENABLE_V1_SHIFT;
+		errconfig_offs = ERRCONFIG_V1;
+		vpboundint_en = ERRCONFIG_VPBOUNDINTEN_V1;
+		vpboundint_st = ERRCONFIG_VPBOUNDINTST_V1;
+	} else if (sr->ip_type == SR_TYPE_V2) {
+		senn_shift = SRCONFIG_SENNENABLE_V2_SHIFT;
+		senp_shift = SRCONFIG_SENPENABLE_V2_SHIFT;
+		errconfig_offs = ERRCONFIG_V2;
+		vpboundint_en = ERRCONFIG_VPBOUNDINTEN_V2;
+		vpboundint_st = ERRCONFIG_VPBOUNDINTST_V2;
+	} else {
+		dev_err(&sr->pdev->dev, "%s: Trying to Configure smartreflex"
+			"module without specifying the ip\n", __func__);
+		return -EINVAL;
+	}
+
+	sr_config |= ((senn_en << senn_shift) | (senp_en << senp_shift));
+	sr_write_reg(sr, SRCONFIG, sr_config);
+	sr_errconfig = (sr->err_weight << ERRCONFIG_ERRWEIGHT_SHIFT) |
+		(sr->err_maxlimit << ERRCONFIG_ERRMAXLIMIT_SHIFT) |
+		(sr->err_minlimit <<  ERRCONFIG_ERRMINLIMIT_SHIFT);
+	sr_modify_reg(sr, errconfig_offs, (SR_ERRWEIGHT_MASK |
+		SR_ERRMAXLIMIT_MASK | SR_ERRMINLIMIT_MASK),
+		sr_errconfig);
+
+	/* Enabling the interrupts if the ERROR module is used */
+	sr_modify_reg(sr, errconfig_offs,
+		vpboundint_en, (vpboundint_en | vpboundint_st));
+
+	return 0;
+}
+
+/**
+ * sr_configure_minmax() - Configures the smrtreflex to perform AVS using the
+ *			 minmaxavg module.
+ * @voltdm:	VDD pointer to which the SR module to be configured belongs to.
+ *
+ * This API is to be called from the smartreflex class driver to
+ * configure the minmaxavg module inside the smartreflex module.
+ * SR settings if using the ERROR module inside Smartreflex.
+ * SR CLASS 3 by default uses only the ERROR module where as
+ * SR CLASS 2 can choose between ERROR module and MINMAXAVG
+ * module. Returns 0 on success and error value in case of failure.
+ */
+int sr_configure_minmax(struct voltagedomain *voltdm)
+{
+	u32 sr_config, sr_avgwt;
+	u32 senp_en = 0, senn_en = 0;
+	u8 senp_shift, senn_shift;
+	struct omap_sr *sr = _sr_lookup(voltdm);
+
+	if (IS_ERR(sr)) {
+		pr_warning("%s: omap_sr struct for sr_%s not found\n",
+			__func__, voltdm->name);
+		return -EINVAL;
+	}
+
+	if (!sr->clk_length)
+		sr_set_clk_length(sr);
+
+	senp_en = sr->senp_mod;
+	senn_en = sr->senn_mod;
+
+	sr_config = (sr->clk_length << SRCONFIG_SRCLKLENGTH_SHIFT) |
+		SRCONFIG_SENENABLE |
+		(sr->accum_data << SRCONFIG_ACCUMDATA_SHIFT);
+
+	if (sr->ip_type == SR_TYPE_V1) {
+		sr_config |= SRCONFIG_DELAYCTRL;
+		senn_shift = SRCONFIG_SENNENABLE_V1_SHIFT;
+		senp_shift = SRCONFIG_SENPENABLE_V1_SHIFT;
+	} else if (sr->ip_type == SR_TYPE_V2) {
+		senn_shift = SRCONFIG_SENNENABLE_V2_SHIFT;
+		senp_shift = SRCONFIG_SENPENABLE_V2_SHIFT;
+	} else {
+		dev_err(&sr->pdev->dev, "%s: Trying to Configure smartreflex"
+			"module without specifying the ip\n", __func__);
+		return -EINVAL;
+	}
+
+	sr_config |= ((senn_en << senn_shift) | (senp_en << senp_shift));
+	sr_write_reg(sr, SRCONFIG, sr_config);
+	sr_avgwt = (sr->senp_avgweight << AVGWEIGHT_SENPAVGWEIGHT_SHIFT) |
+		(sr->senn_avgweight << AVGWEIGHT_SENNAVGWEIGHT_SHIFT);
+	sr_write_reg(sr, AVGWEIGHT, sr_avgwt);
+
+	/*
+	 * Enabling the interrupts if MINMAXAVG module is used.
+	 * TODO: check if all the interrupts are mandatory
+	 */
+	if (sr->ip_type == SR_TYPE_V1) {
+		sr_modify_reg(sr, ERRCONFIG_V1,
+			(ERRCONFIG_MCUACCUMINTEN | ERRCONFIG_MCUVALIDINTEN |
+			ERRCONFIG_MCUBOUNDINTEN),
+			(ERRCONFIG_MCUACCUMINTEN | ERRCONFIG_MCUACCUMINTST |
+			 ERRCONFIG_MCUVALIDINTEN | ERRCONFIG_MCUVALIDINTST |
+			 ERRCONFIG_MCUBOUNDINTEN | ERRCONFIG_MCUBOUNDINTST));
+	} else if (sr->ip_type == SR_TYPE_V2) {
+		sr_write_reg(sr, IRQSTATUS,
+			IRQSTATUS_MCUACCUMINT | IRQSTATUS_MCVALIDINT |
+			IRQSTATUS_MCBOUNDSINT | IRQSTATUS_MCUDISABLEACKINT);
+		sr_write_reg(sr, IRQENABLE_SET,
+			IRQENABLE_MCUACCUMINT | IRQENABLE_MCUVALIDINT |
+			IRQENABLE_MCUBOUNDSINT | IRQENABLE_MCUDISABLEACKINT);
+	}
+
+	return 0;
+}
+
+/**
+ * sr_enable() - Enables the smartreflex module.
+ * @voltdm:	VDD pointer to which the SR module to be configured belongs to.
+ * @volt:	The voltage at which the Voltage domain associated with
+ *		the smartreflex module is operating at.
+ *		This is required only to program the correct Ntarget value.
+ *
+ * This API is to be called from the smartreflex class driver to
+ * enable a smartreflex module. Returns 0 on success. Returns error
+ * value if the voltage passed is wrong or if ntarget value is wrong.
+ */
+int sr_enable(struct voltagedomain *voltdm, unsigned long volt)
+{
+	u32 nvalue_reciprocal;
+	struct omap_volt_data *volt_data;
+	struct omap_sr *sr = _sr_lookup(voltdm);
+	int ret;
+
+	if (IS_ERR(sr)) {
+		pr_warning("%s: omap_sr struct for sr_%s not found\n",
+			__func__, voltdm->name);
+		return -EINVAL;
+	}
+
+	volt_data = omap_voltage_get_voltdata(sr->voltdm, volt);
+
+	if (IS_ERR(volt_data)) {
+		dev_warn(&sr->pdev->dev, "%s: Unable to get voltage table"
+			"for nominal voltage %ld\n", __func__, volt);
+		return -ENODATA;
+	}
+
+	nvalue_reciprocal = sr_retrieve_nvalue(sr, volt_data->sr_efuse_offs);
+
+	if (!nvalue_reciprocal) {
+		dev_warn(&sr->pdev->dev, "%s: NVALUE = 0 at voltage %ld\n",
+			__func__, volt);
+		return -ENODATA;
+	}
+
+	/* errminlimit is opp dependent and hence linked to voltage */
+	sr->err_minlimit = volt_data->sr_errminlimit;
+
+	pm_runtime_get_sync(&sr->pdev->dev);
+
+	/* Check if SR is already enabled. If yes do nothing */
+	if (sr_read_reg(sr, SRCONFIG) & SRCONFIG_SRENABLE)
+		return 0;
+
+	/* Configure SR */
+	ret = sr_class->configure(voltdm);
+	if (ret)
+		return ret;
+
+	sr_write_reg(sr, NVALUERECIPROCAL, nvalue_reciprocal);
+
+	/* SRCONFIG - enable SR */
+	sr_modify_reg(sr, SRCONFIG, SRCONFIG_SRENABLE, SRCONFIG_SRENABLE);
+	return 0;
+}
+
+/**
+ * sr_disable() - Disables the smartreflex module.
+ * @voltdm:	VDD pointer to which the SR module to be configured belongs to.
+ *
+ * This API is to be called from the smartreflex class driver to
+ * disable a smartreflex module.
+ */
+void sr_disable(struct voltagedomain *voltdm)
+{
+	struct omap_sr *sr = _sr_lookup(voltdm);
+
+	if (IS_ERR(sr)) {
+		pr_warning("%s: omap_sr struct for sr_%s not found\n",
+			__func__, voltdm->name);
+		return;
+	}
+
+	/* Check if SR clocks are already disabled. If yes do nothing */
+	if (pm_runtime_suspended(&sr->pdev->dev))
+		return;
+
+	/*
+	 * Disable SR if only it is indeed enabled. Else just
+	 * disable the clocks.
+	 */
+	if (sr_read_reg(sr, SRCONFIG) & SRCONFIG_SRENABLE) {
+		if (sr->ip_type == SR_TYPE_V1)
+			sr_v1_disable(sr);
+		else if (sr->ip_type == SR_TYPE_V2)
+			sr_v2_disable(sr);
+	}
+
+	pm_runtime_put_sync(&sr->pdev->dev);
+}
+
+/**
+ * sr_register_class() - API to register a smartreflex class parameters.
+ * @class_data:	The structure containing various sr class specific data.
+ *
+ * This API is to be called by the smartreflex class driver to register itself
+ * with the smartreflex driver during init. Returns 0 on success else the
+ * error value.
+ */
+int sr_register_class(struct omap_sr_class_data *class_data)
+{
+	struct omap_sr *sr_info;
+
+	if (!class_data) {
+		pr_warning("%s:, Smartreflex class data passed is NULL\n",
+			__func__);
+		return -EINVAL;
+	}
+
+	if (sr_class) {
+		pr_warning("%s: Smartreflex class driver already registered\n",
+			__func__);
+		return -EBUSY;
+	}
+
+	sr_class = class_data;
+
+	/*
+	 * Call into late init to do intializations that require
+	 * both sr driver and sr class driver to be initiallized.
+	 */
+	list_for_each_entry(sr_info, &sr_list, node)
+		sr_late_init(sr_info);
+
+	return 0;
+}
+
+/**
+ * omap_sr_enable() -  API to enable SR clocks and to call into the
+ *			registered smartreflex class enable API.
+ * @voltdm:	VDD pointer to which the SR module to be configured belongs to.
+ *
+ * This API is to be called from the kernel in order to enable
+ * a particular smartreflex module. This API will do the initial
+ * configurations to turn on the smartreflex module and in turn call
+ * into the registered smartreflex class enable API.
+ */
+void omap_sr_enable(struct voltagedomain *voltdm)
+{
+	struct omap_sr *sr = _sr_lookup(voltdm);
+
+	if (IS_ERR(sr)) {
+		pr_warning("%s: omap_sr struct for sr_%s not found\n",
+			__func__, voltdm->name);
+		return;
+	}
+
+	if (!sr->autocomp_active)
+		return;
+
+	if (!sr_class || !(sr_class->enable) || !(sr_class->configure)) {
+		dev_warn(&sr->pdev->dev, "%s: smartreflex class driver not"
+			"registered\n", __func__);
+		return;
+	}
+
+	sr_class->enable(voltdm);
+}
+
+/**
+ * omap_sr_disable() - API to disable SR without resetting the voltage
+ *			processor voltage
+ * @voltdm:	VDD pointer to which the SR module to be configured belongs to.
+ *
+ * This API is to be called from the kernel in order to disable
+ * a particular smartreflex module. This API will in turn call
+ * into the registered smartreflex class disable API. This API will tell
+ * the smartreflex class disable not to reset the VP voltage after
+ * disabling smartreflex.
+ */
+void omap_sr_disable(struct voltagedomain *voltdm)
+{
+	struct omap_sr *sr = _sr_lookup(voltdm);
+
+	if (IS_ERR(sr)) {
+		pr_warning("%s: omap_sr struct for sr_%s not found\n",
+			__func__, voltdm->name);
+		return;
+	}
+
+	if (!sr->autocomp_active)
+		return;
+
+	if (!sr_class || !(sr_class->disable)) {
+		dev_warn(&sr->pdev->dev, "%s: smartreflex class driver not"
+			"registered\n", __func__);
+		return;
+	}
+
+	sr_class->disable(voltdm, 0);
+}
+
+/**
+ * omap_sr_disable_reset_volt() - API to disable SR and reset the
+ *				voltage processor voltage
+ * @voltdm:	VDD pointer to which the SR module to be configured belongs to.
+ *
+ * This API is to be called from the kernel in order to disable
+ * a particular smartreflex module. This API will in turn call
+ * into the registered smartreflex class disable API. This API will tell
+ * the smartreflex class disable to reset the VP voltage after
+ * disabling smartreflex.
+ */
+void omap_sr_disable_reset_volt(struct voltagedomain *voltdm)
+{
+	struct omap_sr *sr = _sr_lookup(voltdm);
+
+	if (IS_ERR(sr)) {
+		pr_warning("%s: omap_sr struct for sr_%s not found\n",
+			__func__, voltdm->name);
+		return;
+	}
+
+	if (!sr->autocomp_active)
+		return;
+
+	if (!sr_class || !(sr_class->disable)) {
+		dev_warn(&sr->pdev->dev, "%s: smartreflex class driver not"
+			"registered\n", __func__);
+		return;
+	}
+
+	sr_class->disable(voltdm, 1);
+}
+
+/**
+ * omap_sr_register_pmic() - API to register pmic specific info.
+ * @pmic_data:	The structure containing pmic specific data.
+ *
+ * This API is to be called from the PMIC specific code to register with
+ * smartreflex driver pmic specific info. Currently the only info required
+ * is the smartreflex init on the PMIC side.
+ */
+void omap_sr_register_pmic(struct omap_sr_pmic_data *pmic_data)
+{
+	if (!pmic_data) {
+		pr_warning("%s: Trying to register NULL PMIC data structure"
+			"with smartreflex\n", __func__);
+		return;
+	}
+
+	sr_pmic_data = pmic_data;
+}
+
+/* PM Debug Fs enteries to enable disable smartreflex. */
+static int omap_sr_autocomp_show(void *data, u64 *val)
+{
+	struct omap_sr *sr_info = (struct omap_sr *) data;
+
+	if (!sr_info) {
+		pr_warning("%s: omap_sr struct for sr_%s not found\n",
+			__func__, sr_info->voltdm->name);
+		return -EINVAL;
+	}
+
+	*val = sr_info->autocomp_active;
+
+	return 0;
+}
+
+static int omap_sr_autocomp_store(void *data, u64 val)
+{
+	struct omap_sr *sr_info = (struct omap_sr *) data;
+
+	if (!sr_info) {
+		pr_warning("%s: omap_sr struct for sr_%s not found\n",
+			__func__, sr_info->voltdm->name);
+		return -EINVAL;
+	}
+
+	/* Sanity check */
+	if (val && (val != 1)) {
+		pr_warning("%s: Invalid argument %lld\n", __func__, val);
+		return -EINVAL;
+	}
+
+	if (!val)
+		sr_stop_vddautocomp(sr_info);
+	else
+		sr_start_vddautocomp(sr_info);
+
+	return 0;
+}
+
+DEFINE_SIMPLE_ATTRIBUTE(pm_sr_fops, omap_sr_autocomp_show,
+		omap_sr_autocomp_store, "%llu\n");
+
+static int __init omap_sr_probe(struct platform_device *pdev)
+{
+	struct omap_sr *sr_info = kzalloc(sizeof(struct omap_sr), GFP_KERNEL);
+	struct omap_sr_data *pdata = pdev->dev.platform_data;
+	struct resource *mem, *irq;
+	struct dentry *vdd_dbg_dir, *dbg_dir, *nvalue_dir;
+	struct omap_volt_data *volt_data;
+	int i, ret = 0;
+
+	if (!sr_info) {
+		dev_err(&pdev->dev, "%s: unable to allocate sr_info\n",
+			__func__);
+		return -ENOMEM;
+	}
+
+	if (!pdata) {
+		dev_err(&pdev->dev, "%s: platform data missing\n", __func__);
+		return -EINVAL;
+	}
+
+	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!mem) {
+		dev_err(&pdev->dev, "%s: no mem resource\n", __func__);
+		ret = -ENODEV;
+		goto err_free_devinfo;
+	}
+
+	irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+
+	pm_runtime_enable(&pdev->dev);
+
+	sr_info->pdev = pdev;
+	sr_info->srid = pdev->id;
+	sr_info->voltdm = pdata->voltdm;
+	sr_info->nvalue_table = pdata->nvalue_table;
+	sr_info->nvalue_count = pdata->nvalue_count;
+	sr_info->senn_mod = pdata->senn_mod;
+	sr_info->senp_mod = pdata->senp_mod;
+	sr_info->autocomp_active = false;
+	sr_info->ip_type = pdata->ip_type;
+	sr_info->base = ioremap(mem->start, resource_size(mem));
+	if (!sr_info->base) {
+		dev_err(&pdev->dev, "%s: ioremap fail\n", __func__);
+		ret = -ENOMEM;
+		goto err_release_region;
+	}
+
+	if (irq)
+		sr_info->irq = irq->start;
+
+	sr_set_clk_length(sr_info);
+	sr_set_regfields(sr_info);
+
+	list_add(&sr_info->node, &sr_list);
+
+	/*
+	 * Call into late init to do intializations that require
+	 * both sr driver and sr class driver to be initiallized.
+	 */
+	if (sr_class) {
+		ret = sr_late_init(sr_info);
+		if (ret) {
+			pr_warning("%s: Error in SR late init\n", __func__);
+			return ret;
+		}
+	}
+
+	dev_info(&pdev->dev, "%s: SmartReflex driver initialized\n", __func__);
+
+	/*
+	 * If the voltage domain debugfs directory is not created, do
+	 * not try to create rest of the debugfs entries.
+	 */
+	vdd_dbg_dir = omap_voltage_get_dbgdir(sr_info->voltdm);
+	if (!vdd_dbg_dir)
+		return -EINVAL;
+
+	dbg_dir = debugfs_create_dir("smartreflex", vdd_dbg_dir);
+	if (IS_ERR(dbg_dir)) {
+		dev_err(&pdev->dev, "%s: Unable to create debugfs directory\n",
+			__func__);
+		return PTR_ERR(dbg_dir);
+	}
+
+	(void) debugfs_create_file("autocomp", S_IRUGO | S_IWUGO, dbg_dir,
+				(void *)sr_info, &pm_sr_fops);
+	(void) debugfs_create_x32("errweight", S_IRUGO, dbg_dir,
+			&sr_info->err_weight);
+	(void) debugfs_create_x32("errmaxlimit", S_IRUGO, dbg_dir,
+			&sr_info->err_maxlimit);
+	(void) debugfs_create_x32("errminlimit", S_IRUGO, dbg_dir,
+			&sr_info->err_minlimit);
+
+	nvalue_dir = debugfs_create_dir("nvalue", dbg_dir);
+	if (IS_ERR(nvalue_dir)) {
+		dev_err(&pdev->dev, "%s: Unable to create debugfs directory"
+			"for n-values\n", __func__);
+		return PTR_ERR(nvalue_dir);
+	}
+
+	omap_voltage_get_volttable(sr_info->voltdm, &volt_data);
+	if (!volt_data) {
+		dev_warn(&pdev->dev, "%s: No Voltage table for the"
+			" corresponding vdd vdd_%s. Cannot create debugfs"
+			"entries for n-values\n",
+			__func__, sr_info->voltdm->name);
+		return -ENODATA;
+	}
+
+	for (i = 0; i < sr_info->nvalue_count; i++) {
+		char *name;
+		char volt_name[32];
+
+		name = kzalloc(NVALUE_NAME_LEN + 1, GFP_KERNEL);
+		if (!name) {
+			dev_err(&pdev->dev, "%s: Unable to allocate memory"
+				" for n-value directory name\n",  __func__);
+			return -ENOMEM;
+		}
+
+		strcpy(name, "volt_");
+		sprintf(volt_name, "%d", volt_data[i].volt_nominal);
+		strcat(name, volt_name);
+		(void) debugfs_create_x32(name, S_IRUGO | S_IWUGO, nvalue_dir,
+				&(sr_info->nvalue_table[i].nvalue));
+	}
+
+	return ret;
+
+err_release_region:
+	release_mem_region(mem->start, resource_size(mem));
+err_free_devinfo:
+	kfree(sr_info);
+
+	return ret;
+}
+
+static int __devexit omap_sr_remove(struct platform_device *pdev)
+{
+	struct omap_sr_data *pdata = pdev->dev.platform_data;
+	struct omap_sr *sr_info;
+	struct resource *mem;
+
+	if (!pdata) {
+		dev_err(&pdev->dev, "%s: platform data missing\n", __func__);
+		return -EINVAL;
+	}
+
+	sr_info = _sr_lookup(pdata->voltdm);
+	if (!sr_info) {
+		dev_warn(&pdev->dev, "%s: omap_sr struct not found\n",
+			__func__);
+		return -EINVAL;
+	}
+
+	if (sr_info->autocomp_active)
+		sr_stop_vddautocomp(sr_info);
+
+	list_del(&sr_info->node);
+	iounmap(sr_info->base);
+	kfree(sr_info);
+	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	release_mem_region(mem->start, resource_size(mem));
+
+	return 0;
+}
+
+static struct platform_driver smartreflex_driver = {
+	.remove         = omap_sr_remove,
+	.driver		= {
+		.name	= "smartreflex",
+	},
+};
+
+static int __init sr_init(void)
+{
+	int ret = 0;
+
+	/*
+	 * sr_init is a late init. If by then a pmic specific API is not
+	 * registered either there is no need for anything to be done on
+	 * the PMIC side or somebody has forgotten to register a PMIC
+	 * handler. Warn for the second condition.
+	 */
+	if (sr_pmic_data && sr_pmic_data->sr_pmic_init)
+		sr_pmic_data->sr_pmic_init();
+	else
+		pr_warning("%s: No PMIC hook to init smartreflex\n", __func__);
+
+	ret = platform_driver_probe(&smartreflex_driver, omap_sr_probe);
+	if (ret) {
+		pr_err("%s: platform driver register failed for SR\n",
+			__func__);
+		return ret;
+	}
+
+	return 0;
+}
+
+static void __exit sr_exit(void)
+{
+	platform_driver_unregister(&smartreflex_driver);
+}
+late_initcall(sr_init);
+module_exit(sr_exit);
+
+MODULE_DESCRIPTION("OMAP Smartreflex Driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:" DRIVER_NAME);
+MODULE_AUTHOR("Texas Instruments Inc");

arch/arm/mach-omap2/sr_device.c

@@ -0,0 +1,146 @@
+/*
+ * OMAP3/OMAP4 smartreflex device file
+ *
+ * Author: Thara Gopinath	<thara@ti.com>
+ *
+ * Based originally on code from smartreflex.c
+ * Copyright (C) 2010 Texas Instruments, Inc.
+ * Thara Gopinath <thara@ti.com>
+ *
+ * Copyright (C) 2008 Nokia Corporation
+ * Kalle Jokiniemi
+ *
+ * Copyright (C) 2007 Texas Instruments, Inc.
+ * Lesly A M <x0080970@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/err.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+
+#include <plat/omap_device.h>
+#include <plat/smartreflex.h>
+#include <plat/voltage.h>
+
+#include "control.h"
+
+static bool sr_enable_on_init;
+
+static struct omap_device_pm_latency omap_sr_latency[] = {
+	{
+		.deactivate_func = omap_device_idle_hwmods,
+		.activate_func	 = omap_device_enable_hwmods,
+		.flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST
+	},
+};
+
+/* Read EFUSE values from control registers for OMAP3430 */
+static void __init sr_set_nvalues(struct omap_volt_data *volt_data,
+				struct omap_sr_data *sr_data)
+{
+	struct omap_sr_nvalue_table *nvalue_table;
+	int i, count = 0;
+
+	while (volt_data[count].volt_nominal)
+		count++;
+
+	nvalue_table = kzalloc(sizeof(struct omap_sr_nvalue_table)*count,
+			GFP_KERNEL);
+
+	for (i = 0; i < count; i++) {
+		u32 v;
+		/*
+		 * In OMAP4 the efuse registers are 24 bit aligned.
+		 * A __raw_readl will fail for non-32 bit aligned address
+		 * and hence the 8-bit read and shift.
+		 */
+		if (cpu_is_omap44xx()) {
+			u16 offset = volt_data[i].sr_efuse_offs;
+
+			v = omap_ctrl_readb(offset) |
+				omap_ctrl_readb(offset + 1) << 8 |
+				omap_ctrl_readb(offset + 2) << 16;
+		} else {
+			 v = omap_ctrl_readl(volt_data[i].sr_efuse_offs);
+		}
+
+		nvalue_table[i].efuse_offs = volt_data[i].sr_efuse_offs;
+		nvalue_table[i].nvalue = v;
+	}
+
+	sr_data->nvalue_table = nvalue_table;
+	sr_data->nvalue_count = count;
+}
+
+static int sr_dev_init(struct omap_hwmod *oh, void *user)
+{
+	struct omap_sr_data *sr_data;
+	struct omap_device *od;
+	struct omap_volt_data *volt_data;
+	char *name = "smartreflex";
+	static int i;
+
+	sr_data = kzalloc(sizeof(struct omap_sr_data), GFP_KERNEL);
+	if (!sr_data) {
+		pr_err("%s: Unable to allocate memory for %s sr_data.Error!\n",
+			__func__, oh->name);
+		return -ENOMEM;
+	}
+
+	if (!oh->vdd_name) {
+		pr_err("%s: No voltage domain specified for %s."
+			"Cannot initialize\n", __func__, oh->name);
+		goto exit;
+	}
+
+	sr_data->ip_type = oh->class->rev;
+	sr_data->senn_mod = 0x1;
+	sr_data->senp_mod = 0x1;
+
+	sr_data->voltdm = omap_voltage_domain_lookup(oh->vdd_name);
+	if (IS_ERR(sr_data->voltdm)) {
+		pr_err("%s: Unable to get voltage domain pointer for VDD %s\n",
+			__func__, oh->vdd_name);
+		goto exit;
+	}
+
+	omap_voltage_get_volttable(sr_data->voltdm, &volt_data);
+	if (!volt_data) {
+		pr_warning("%s: No Voltage table registerd fo VDD%d."
+			"Something really wrong\n\n", __func__, i + 1);
+		goto exit;
+	}
+
+	sr_set_nvalues(volt_data, sr_data);
+
+	sr_data->enable_on_init = sr_enable_on_init;
+
+	od = omap_device_build(name, i, oh, sr_data, sizeof(*sr_data),
+			       omap_sr_latency,
+			       ARRAY_SIZE(omap_sr_latency), 0);
+	if (IS_ERR(od))
+		pr_warning("%s: Could not build omap_device for %s: %s.\n\n",
+			__func__, name, oh->name);
+exit:
+	i++;
+	kfree(sr_data);
+	return 0;
+}
+
+/*
+ * API to be called from board files to enable smartreflex
+ * autocompensation at init.
+ */
+void __init omap_enable_smartreflex_on_init(void)
+{
+	sr_enable_on_init = true;
+}
+
+int __init omap_devinit_smartreflex(void)
+{
+	return omap_hwmod_for_each_by_class("smartreflex", sr_dev_init, NULL);
+}

arch/arm/mach-omap2/voltage.c

@@ -0,0 +1,1571 @@
+/*
+ * OMAP3/OMAP4 Voltage Management Routines
+ *
+ * Author: Thara Gopinath	<thara@ti.com>
+ *
+ * Copyright (C) 2007 Texas Instruments, Inc.
+ * Rajendra Nayak <rnayak@ti.com>
+ * Lesly A M <x0080970@ti.com>
+ *
+ * Copyright (C) 2008 Nokia Corporation
+ * Kalle Jokiniemi
+ *
+ * Copyright (C) 2010 Texas Instruments, Inc.
+ * Thara Gopinath <thara@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/debugfs.h>
+#include <linux/slab.h>
+
+#include <plat/common.h>
+#include <plat/voltage.h>
+
+#include "prm-regbits-34xx.h"
+#include "prm-regbits-44xx.h"
+#include "prm44xx.h"
+#include "prcm44xx.h"
+#include "prminst44xx.h"
+#include "control.h"
+
+#define VP_IDLE_TIMEOUT		200
+#define VP_TRANXDONE_TIMEOUT	300
+#define VOLTAGE_DIR_SIZE	16
+
+/* Voltage processor register offsets */
+struct vp_reg_offs {
+	u8 vpconfig;
+	u8 vstepmin;
+	u8 vstepmax;
+	u8 vlimitto;
+	u8 vstatus;
+	u8 voltage;
+};
+
+/* Voltage Processor bit field values, shifts and masks */
+struct vp_reg_val {
+	/* PRM module */
+	u16 prm_mod;
+	/* VPx_VPCONFIG */
+	u32 vpconfig_erroroffset;
+	u16 vpconfig_errorgain;
+	u32 vpconfig_errorgain_mask;
+	u8 vpconfig_errorgain_shift;
+	u32 vpconfig_initvoltage_mask;
+	u8 vpconfig_initvoltage_shift;
+	u32 vpconfig_timeouten;
+	u32 vpconfig_initvdd;
+	u32 vpconfig_forceupdate;
+	u32 vpconfig_vpenable;
+	/* VPx_VSTEPMIN */
+	u8 vstepmin_stepmin;
+	u16 vstepmin_smpswaittimemin;
+	u8 vstepmin_stepmin_shift;
+	u8 vstepmin_smpswaittimemin_shift;
+	/* VPx_VSTEPMAX */
+	u8 vstepmax_stepmax;
+	u16 vstepmax_smpswaittimemax;
+	u8 vstepmax_stepmax_shift;
+	u8 vstepmax_smpswaittimemax_shift;
+	/* VPx_VLIMITTO */
+	u8 vlimitto_vddmin;
+	u8 vlimitto_vddmax;
+	u16 vlimitto_timeout;
+	u8 vlimitto_vddmin_shift;
+	u8 vlimitto_vddmax_shift;
+	u8 vlimitto_timeout_shift;
+	/* PRM_IRQSTATUS*/
+	u32 tranxdone_status;
+};
+
+/* Voltage controller registers and offsets */
+struct vc_reg_info {
+	/* PRM module */
+	u16 prm_mod;
+	/* VC register offsets */
+	u8 smps_sa_reg;
+	u8 smps_volra_reg;
+	u8 bypass_val_reg;
+	u8 cmdval_reg;
+	u8 voltsetup_reg;
+	/*VC_SMPS_SA*/
+	u8 smps_sa_shift;
+	u32 smps_sa_mask;
+	/* VC_SMPS_VOL_RA */
+	u8 smps_volra_shift;
+	u32 smps_volra_mask;
+	/* VC_BYPASS_VAL */
+	u8 data_shift;
+	u8 slaveaddr_shift;
+	u8 regaddr_shift;
+	u32 valid;
+	/* VC_CMD_VAL */
+	u8 cmd_on_shift;
+	u8 cmd_onlp_shift;
+	u8 cmd_ret_shift;
+	u8 cmd_off_shift;
+	u32 cmd_on_mask;
+	/* PRM_VOLTSETUP */
+	u8 voltsetup_shift;
+	u32 voltsetup_mask;
+};
+
+/**
+ * omap_vdd_info - Per Voltage Domain info
+ *
+ * @volt_data		: voltage table having the distinct voltages supported
+ *			  by the domain and other associated per voltage data.
+ * @pmic_info		: pmic specific parameters which should be populted by
+ *			  the pmic drivers.
+ * @vp_offs		: structure containing the offsets for various
+ *			  vp registers
+ * @vp_reg		: the register values, shifts, masks for various
+ *			  vp registers
+ * @vc_reg		: structure containing various various vc registers,
+ *			  shifts, masks etc.
+ * @voltdm		: pointer to the voltage domain structure
+ * @debug_dir		: debug directory for this voltage domain.
+ * @curr_volt		: current voltage for this vdd.
+ * @ocp_mod		: The prm module for accessing the prm irqstatus reg.
+ * @prm_irqst_reg	: prm irqstatus register.
+ * @vp_enabled		: flag to keep track of whether vp is enabled or not
+ * @volt_scale		: API to scale the voltage of the vdd.
+ */
+struct omap_vdd_info {
+	struct omap_volt_data *volt_data;
+	struct omap_volt_pmic_info *pmic_info;
+	struct vp_reg_offs vp_offs;
+	struct vp_reg_val vp_reg;
+	struct vc_reg_info vc_reg;
+	struct voltagedomain voltdm;
+	struct dentry *debug_dir;
+	u32 curr_volt;
+	u16 ocp_mod;
+	u8 prm_irqst_reg;
+	bool vp_enabled;
+	u32 (*read_reg) (u16 mod, u8 offset);
+	void (*write_reg) (u32 val, u16 mod, u8 offset);
+	int (*volt_scale) (struct omap_vdd_info *vdd,
+		unsigned long target_volt);
+};
+
+static struct omap_vdd_info *vdd_info;
+/*
+ * Number of scalable voltage domains.
+ */
+static int nr_scalable_vdd;
+
+/* OMAP3 VDD sturctures */
+static struct omap_vdd_info omap3_vdd_info[] = {
+	{
+		.vp_offs = {
+			.vpconfig = OMAP3_PRM_VP1_CONFIG_OFFSET,
+			.vstepmin = OMAP3_PRM_VP1_VSTEPMIN_OFFSET,
+			.vstepmax = OMAP3_PRM_VP1_VSTEPMAX_OFFSET,
+			.vlimitto = OMAP3_PRM_VP1_VLIMITTO_OFFSET,
+			.vstatus = OMAP3_PRM_VP1_STATUS_OFFSET,
+			.voltage = OMAP3_PRM_VP1_VOLTAGE_OFFSET,
+		},
+		.voltdm = {
+			.name = "mpu",
+		},
+	},
+	{
+		.vp_offs = {
+			.vpconfig = OMAP3_PRM_VP2_CONFIG_OFFSET,
+			.vstepmin = OMAP3_PRM_VP2_VSTEPMIN_OFFSET,
+			.vstepmax = OMAP3_PRM_VP2_VSTEPMAX_OFFSET,
+			.vlimitto = OMAP3_PRM_VP2_VLIMITTO_OFFSET,
+			.vstatus = OMAP3_PRM_VP2_STATUS_OFFSET,
+			.voltage = OMAP3_PRM_VP2_VOLTAGE_OFFSET,
+		},
+		.voltdm = {
+			.name = "core",
+		},
+	},
+};
+
+#define OMAP3_NR_SCALABLE_VDD ARRAY_SIZE(omap3_vdd_info)
+
+/* OMAP4 VDD sturctures */
+static struct omap_vdd_info omap4_vdd_info[] = {
+	{
+		.vp_offs = {
+			.vpconfig = OMAP4_PRM_VP_MPU_CONFIG_OFFSET,
+			.vstepmin = OMAP4_PRM_VP_MPU_VSTEPMIN_OFFSET,
+			.vstepmax = OMAP4_PRM_VP_MPU_VSTEPMAX_OFFSET,
+			.vlimitto = OMAP4_PRM_VP_MPU_VLIMITTO_OFFSET,
+			.vstatus = OMAP4_PRM_VP_MPU_STATUS_OFFSET,
+			.voltage = OMAP4_PRM_VP_MPU_VOLTAGE_OFFSET,
+		},
+		.voltdm = {
+			.name = "mpu",
+		},
+	},
+	{
+		.vp_offs = {
+			.vpconfig = OMAP4_PRM_VP_IVA_CONFIG_OFFSET,
+			.vstepmin = OMAP4_PRM_VP_IVA_VSTEPMIN_OFFSET,
+			.vstepmax = OMAP4_PRM_VP_IVA_VSTEPMAX_OFFSET,
+			.vlimitto = OMAP4_PRM_VP_IVA_VLIMITTO_OFFSET,
+			.vstatus = OMAP4_PRM_VP_IVA_STATUS_OFFSET,
+			.voltage = OMAP4_PRM_VP_IVA_VOLTAGE_OFFSET,
+		},
+		.voltdm = {
+			.name = "iva",
+		},
+	},
+	{
+		.vp_offs = {
+			.vpconfig = OMAP4_PRM_VP_CORE_CONFIG_OFFSET,
+			.vstepmin = OMAP4_PRM_VP_CORE_VSTEPMIN_OFFSET,
+			.vstepmax = OMAP4_PRM_VP_CORE_VSTEPMAX_OFFSET,
+			.vlimitto = OMAP4_PRM_VP_CORE_VLIMITTO_OFFSET,
+			.vstatus = OMAP4_PRM_VP_CORE_STATUS_OFFSET,
+			.voltage = OMAP4_PRM_VP_CORE_VOLTAGE_OFFSET,
+		},
+		.voltdm = {
+			.name = "core",
+		},
+	},
+};
+
+#define OMAP4_NR_SCALABLE_VDD ARRAY_SIZE(omap4_vdd_info)
+
+/*
+ * Structures containing OMAP3430/OMAP3630 voltage supported and various
+ * voltage dependent data for each VDD.
+ */
+#define VOLT_DATA_DEFINE(_v_nom, _efuse_offs, _errminlimit, _errgain)	\
+{									\
+	.volt_nominal	= _v_nom,					\
+	.sr_efuse_offs	= _efuse_offs,					\
+	.sr_errminlimit	= _errminlimit,					\
+	.vp_errgain	= _errgain					\
+}
+
+/* VDD1 */
+static struct omap_volt_data omap34xx_vddmpu_volt_data[] = {
+	VOLT_DATA_DEFINE(OMAP3430_VDD_MPU_OPP1_UV, OMAP343X_CONTROL_FUSE_OPP1_VDD1, 0xf4, 0x0c),
+	VOLT_DATA_DEFINE(OMAP3430_VDD_MPU_OPP2_UV, OMAP343X_CONTROL_FUSE_OPP2_VDD1, 0xf4, 0x0c),
+	VOLT_DATA_DEFINE(OMAP3430_VDD_MPU_OPP3_UV, OMAP343X_CONTROL_FUSE_OPP3_VDD1, 0xf9, 0x18),
+	VOLT_DATA_DEFINE(OMAP3430_VDD_MPU_OPP4_UV, OMAP343X_CONTROL_FUSE_OPP4_VDD1, 0xf9, 0x18),
+	VOLT_DATA_DEFINE(OMAP3430_VDD_MPU_OPP5_UV, OMAP343X_CONTROL_FUSE_OPP5_VDD1, 0xf9, 0x18),
+	VOLT_DATA_DEFINE(0, 0, 0, 0),
+};
+
+static struct omap_volt_data omap36xx_vddmpu_volt_data[] = {
+	VOLT_DATA_DEFINE(OMAP3630_VDD_MPU_OPP50_UV, OMAP3630_CONTROL_FUSE_OPP50_VDD1, 0xf4, 0x0c),
+	VOLT_DATA_DEFINE(OMAP3630_VDD_MPU_OPP100_UV, OMAP3630_CONTROL_FUSE_OPP100_VDD1, 0xf9, 0x16),
+	VOLT_DATA_DEFINE(OMAP3630_VDD_MPU_OPP120_UV, OMAP3630_CONTROL_FUSE_OPP120_VDD1, 0xfa, 0x23),
+	VOLT_DATA_DEFINE(OMAP3630_VDD_MPU_OPP1G_UV, OMAP3630_CONTROL_FUSE_OPP1G_VDD1, 0xfa, 0x27),
+	VOLT_DATA_DEFINE(0, 0, 0, 0),
+};
+
+/* VDD2 */
+static struct omap_volt_data omap34xx_vddcore_volt_data[] = {
+	VOLT_DATA_DEFINE(OMAP3430_VDD_CORE_OPP1_UV, OMAP343X_CONTROL_FUSE_OPP1_VDD2, 0xf4, 0x0c),
+	VOLT_DATA_DEFINE(OMAP3430_VDD_CORE_OPP2_UV, OMAP343X_CONTROL_FUSE_OPP2_VDD2, 0xf4, 0x0c),
+	VOLT_DATA_DEFINE(OMAP3430_VDD_CORE_OPP3_UV, OMAP343X_CONTROL_FUSE_OPP3_VDD2, 0xf9, 0x18),
+	VOLT_DATA_DEFINE(0, 0, 0, 0),
+};
+
+static struct omap_volt_data omap36xx_vddcore_volt_data[] = {
+	VOLT_DATA_DEFINE(OMAP3630_VDD_CORE_OPP50_UV, OMAP3630_CONTROL_FUSE_OPP50_VDD2, 0xf4, 0x0c),
+	VOLT_DATA_DEFINE(OMAP3630_VDD_CORE_OPP100_UV, OMAP3630_CONTROL_FUSE_OPP100_VDD2, 0xf9, 0x16),
+	VOLT_DATA_DEFINE(0, 0, 0, 0),
+};
+
+/*
+ * Structures containing OMAP4430 voltage supported and various
+ * voltage dependent data for each VDD.
+ */
+static struct omap_volt_data omap44xx_vdd_mpu_volt_data[] = {
+	VOLT_DATA_DEFINE(OMAP4430_VDD_MPU_OPP50_UV, OMAP44XX_CONTROL_FUSE_MPU_OPP50, 0xf4, 0x0c),
+	VOLT_DATA_DEFINE(OMAP4430_VDD_MPU_OPP100_UV, OMAP44XX_CONTROL_FUSE_MPU_OPP100, 0xf9, 0x16),
+	VOLT_DATA_DEFINE(OMAP4430_VDD_MPU_OPPTURBO_UV, OMAP44XX_CONTROL_FUSE_MPU_OPPTURBO, 0xfa, 0x23),
+	VOLT_DATA_DEFINE(OMAP4430_VDD_MPU_OPPNITRO_UV, OMAP44XX_CONTROL_FUSE_MPU_OPPNITRO, 0xfa, 0x27),
+	VOLT_DATA_DEFINE(0, 0, 0, 0),
+};
+
+static struct omap_volt_data omap44xx_vdd_iva_volt_data[] = {
+	VOLT_DATA_DEFINE(OMAP4430_VDD_IVA_OPP50_UV, OMAP44XX_CONTROL_FUSE_IVA_OPP50, 0xf4, 0x0c),
+	VOLT_DATA_DEFINE(OMAP4430_VDD_IVA_OPP100_UV, OMAP44XX_CONTROL_FUSE_IVA_OPP100, 0xf9, 0x16),
+	VOLT_DATA_DEFINE(OMAP4430_VDD_IVA_OPPTURBO_UV, OMAP44XX_CONTROL_FUSE_IVA_OPPTURBO, 0xfa, 0x23),
+	VOLT_DATA_DEFINE(0, 0, 0, 0),
+};
+
+static struct omap_volt_data omap44xx_vdd_core_volt_data[] = {
+	VOLT_DATA_DEFINE(OMAP4430_VDD_CORE_OPP50_UV, OMAP44XX_CONTROL_FUSE_CORE_OPP50, 0xf4, 0x0c),
+	VOLT_DATA_DEFINE(OMAP4430_VDD_CORE_OPP100_UV, OMAP44XX_CONTROL_FUSE_CORE_OPP100, 0xf9, 0x16),
+	VOLT_DATA_DEFINE(0, 0, 0, 0),
+};
+
+static struct dentry *voltage_dir;
+
+/* Init function pointers */
+static void (*vc_init) (struct omap_vdd_info *vdd);
+static int (*vdd_data_configure) (struct omap_vdd_info *vdd);
+
+static u32 omap3_voltage_read_reg(u16 mod, u8 offset)
+{
+	return omap2_prm_read_mod_reg(mod, offset);
+}
+
+static void omap3_voltage_write_reg(u32 val, u16 mod, u8 offset)
+{
+	omap2_prm_write_mod_reg(val, mod, offset);
+}
+
+static u32 omap4_voltage_read_reg(u16 mod, u8 offset)
+{
+	return omap4_prminst_read_inst_reg(OMAP4430_PRM_PARTITION,
+					mod, offset);
+}
+
+static void omap4_voltage_write_reg(u32 val, u16 mod, u8 offset)
+{
+	omap4_prminst_write_inst_reg(val, OMAP4430_PRM_PARTITION, mod, offset);
+}
+
+/* Voltage debugfs support */
+static int vp_volt_debug_get(void *data, u64 *val)
+{
+	struct omap_vdd_info *vdd = (struct omap_vdd_info *) data;
+	u8 vsel;
+
+	if (!vdd) {
+		pr_warning("Wrong paramater passed\n");
+		return -EINVAL;
+	}
+
+	vsel = vdd->read_reg(vdd->vp_reg.prm_mod, vdd->vp_offs.voltage);
+	pr_notice("curr_vsel = %x\n", vsel);
+
+	if (!vdd->pmic_info->vsel_to_uv) {
+		pr_warning("PMIC function to convert vsel to voltage"
+			"in uV not registerd\n");
+		return -EINVAL;
+	}
+
+	*val = vdd->pmic_info->vsel_to_uv(vsel);
+	return 0;
+}
+
+static int nom_volt_debug_get(void *data, u64 *val)
+{
+	struct omap_vdd_info *vdd = (struct omap_vdd_info *) data;
+
+	if (!vdd) {
+		pr_warning("Wrong paramater passed\n");
+		return -EINVAL;
+	}
+
+	*val = omap_voltage_get_nom_volt(&vdd->voltdm);
+
+	return 0;
+}
+
+DEFINE_SIMPLE_ATTRIBUTE(vp_volt_debug_fops, vp_volt_debug_get, NULL, "%llu\n");
+DEFINE_SIMPLE_ATTRIBUTE(nom_volt_debug_fops, nom_volt_debug_get, NULL,
+								"%llu\n");
+static void vp_latch_vsel(struct omap_vdd_info *vdd)
+{
+	u32 vpconfig;
+	u16 mod;
+	unsigned long uvdc;
+	char vsel;
+
+	uvdc = omap_voltage_get_nom_volt(&vdd->voltdm);
+	if (!uvdc) {
+		pr_warning("%s: unable to find current voltage for vdd_%s\n",
+			__func__, vdd->voltdm.name);
+		return;
+	}
+
+	if (!vdd->pmic_info || !vdd->pmic_info->uv_to_vsel) {
+		pr_warning("%s: PMIC function to convert voltage in uV to"
+			" vsel not registered\n", __func__);
+		return;
+	}
+
+	mod = vdd->vp_reg.prm_mod;
+
+	vsel = vdd->pmic_info->uv_to_vsel(uvdc);
+
+	vpconfig = vdd->read_reg(mod, vdd->vp_offs.vpconfig);
+	vpconfig &= ~(vdd->vp_reg.vpconfig_initvoltage_mask |
+			vdd->vp_reg.vpconfig_initvdd);
+	vpconfig |= vsel << vdd->vp_reg.vpconfig_initvoltage_shift;
+
+	vdd->write_reg(vpconfig, mod, vdd->vp_offs.vpconfig);
+
+	/* Trigger initVDD value copy to voltage processor */
+	vdd->write_reg((vpconfig | vdd->vp_reg.vpconfig_initvdd), mod,
+			vdd->vp_offs.vpconfig);
+
+	/* Clear initVDD copy trigger bit */
+	vdd->write_reg(vpconfig, mod, vdd->vp_offs.vpconfig);
+}
+
+/* Generic voltage init functions */
+static void __init vp_init(struct omap_vdd_info *vdd)
+{
+	u32 vp_val;
+	u16 mod;
+
+	if (!vdd->read_reg || !vdd->write_reg) {
+		pr_err("%s: No read/write API for accessing vdd_%s regs\n",
+			__func__, vdd->voltdm.name);
+		return;
+	}
+
+	mod = vdd->vp_reg.prm_mod;
+
+	vp_val = vdd->vp_reg.vpconfig_erroroffset |
+		(vdd->vp_reg.vpconfig_errorgain <<
+		vdd->vp_reg.vpconfig_errorgain_shift) |
+		vdd->vp_reg.vpconfig_timeouten;
+	vdd->write_reg(vp_val, mod, vdd->vp_offs.vpconfig);
+
+	vp_val = ((vdd->vp_reg.vstepmin_smpswaittimemin <<
+		vdd->vp_reg.vstepmin_smpswaittimemin_shift) |
+		(vdd->vp_reg.vstepmin_stepmin <<
+		vdd->vp_reg.vstepmin_stepmin_shift));
+	vdd->write_reg(vp_val, mod, vdd->vp_offs.vstepmin);
+
+	vp_val = ((vdd->vp_reg.vstepmax_smpswaittimemax <<
+		vdd->vp_reg.vstepmax_smpswaittimemax_shift) |
+		(vdd->vp_reg.vstepmax_stepmax <<
+		vdd->vp_reg.vstepmax_stepmax_shift));
+	vdd->write_reg(vp_val, mod, vdd->vp_offs.vstepmax);
+
+	vp_val = ((vdd->vp_reg.vlimitto_vddmax <<
+		vdd->vp_reg.vlimitto_vddmax_shift) |
+		(vdd->vp_reg.vlimitto_vddmin <<
+		vdd->vp_reg.vlimitto_vddmin_shift) |
+		(vdd->vp_reg.vlimitto_timeout <<
+		vdd->vp_reg.vlimitto_timeout_shift));
+	vdd->write_reg(vp_val, mod, vdd->vp_offs.vlimitto);
+}
+
+static void __init vdd_debugfs_init(struct omap_vdd_info *vdd)
+{
+	char *name;
+
+	name = kzalloc(VOLTAGE_DIR_SIZE, GFP_KERNEL);
+	if (!name) {
+		pr_warning("%s: Unable to allocate memory for debugfs"
+			" directory name for vdd_%s",
+			__func__, vdd->voltdm.name);
+		return;
+	}
+	strcpy(name, "vdd_");
+	strcat(name, vdd->voltdm.name);
+
+	vdd->debug_dir = debugfs_create_dir(name, voltage_dir);
+	if (IS_ERR(vdd->debug_dir)) {
+		pr_warning("%s: Unable to create debugfs directory for"
+			" vdd_%s\n", __func__, vdd->voltdm.name);
+		vdd->debug_dir = NULL;
+		return;
+	}
+
+	(void) debugfs_create_x16("vp_errorgain", S_IRUGO, vdd->debug_dir,
+				&(vdd->vp_reg.vpconfig_errorgain));
+	(void) debugfs_create_x16("vp_smpswaittimemin", S_IRUGO,
+				vdd->debug_dir,
+				&(vdd->vp_reg.vstepmin_smpswaittimemin));
+	(void) debugfs_create_x8("vp_stepmin", S_IRUGO, vdd->debug_dir,
+				&(vdd->vp_reg.vstepmin_stepmin));
+	(void) debugfs_create_x16("vp_smpswaittimemax", S_IRUGO,
+				vdd->debug_dir,
+				&(vdd->vp_reg.vstepmax_smpswaittimemax));
+	(void) debugfs_create_x8("vp_stepmax", S_IRUGO, vdd->debug_dir,
+				&(vdd->vp_reg.vstepmax_stepmax));
+	(void) debugfs_create_x8("vp_vddmax", S_IRUGO, vdd->debug_dir,
+				&(vdd->vp_reg.vlimitto_vddmax));
+	(void) debugfs_create_x8("vp_vddmin", S_IRUGO, vdd->debug_dir,
+				&(vdd->vp_reg.vlimitto_vddmin));
+	(void) debugfs_create_x16("vp_timeout", S_IRUGO, vdd->debug_dir,
+				&(vdd->vp_reg.vlimitto_timeout));
+	(void) debugfs_create_file("curr_vp_volt", S_IRUGO, vdd->debug_dir,
+				(void *) vdd, &vp_volt_debug_fops);
+	(void) debugfs_create_file("curr_nominal_volt", S_IRUGO,
+				vdd->debug_dir, (void *) vdd,
+				&nom_volt_debug_fops);
+}
+
+/* Voltage scale and accessory APIs */
+static int _pre_volt_scale(struct omap_vdd_info *vdd,
+		unsigned long target_volt, u8 *target_vsel, u8 *current_vsel)
+{
+	struct omap_volt_data *volt_data;
+	u32 vc_cmdval, vp_errgain_val;
+	u16 vp_mod, vc_mod;
+
+	/* Check if suffiecient pmic info is available for this vdd */
+	if (!vdd->pmic_info) {
+		pr_err("%s: Insufficient pmic info to scale the vdd_%s\n",
+			__func__, vdd->voltdm.name);
+		return -EINVAL;
+	}
+
+	if (!vdd->pmic_info->uv_to_vsel) {
+		pr_err("%s: PMIC function to convert voltage in uV to"
+			"vsel not registered. Hence unable to scale voltage"
+			"for vdd_%s\n", __func__, vdd->voltdm.name);
+		return -ENODATA;
+	}
+
+	if (!vdd->read_reg || !vdd->write_reg) {
+		pr_err("%s: No read/write API for accessing vdd_%s regs\n",
+			__func__, vdd->voltdm.name);
+		return -EINVAL;
+	}
+
+	vp_mod = vdd->vp_reg.prm_mod;
+	vc_mod = vdd->vc_reg.prm_mod;
+
+	/* Get volt_data corresponding to target_volt */
+	volt_data = omap_voltage_get_voltdata(&vdd->voltdm, target_volt);
+	if (IS_ERR(volt_data))
+		volt_data = NULL;
+
+	*target_vsel = vdd->pmic_info->uv_to_vsel(target_volt);
+	*current_vsel = vdd->read_reg(vp_mod, vdd->vp_offs.voltage);
+
+	/* Setting the ON voltage to the new target voltage */
+	vc_cmdval = vdd->read_reg(vc_mod, vdd->vc_reg.cmdval_reg);
+	vc_cmdval &= ~vdd->vc_reg.cmd_on_mask;
+	vc_cmdval |= (*target_vsel << vdd->vc_reg.cmd_on_shift);
+	vdd->write_reg(vc_cmdval, vc_mod, vdd->vc_reg.cmdval_reg);
+
+	/* Setting vp errorgain based on the voltage */
+	if (volt_data) {
+		vp_errgain_val = vdd->read_reg(vp_mod,
+				vdd->vp_offs.vpconfig);
+		vdd->vp_reg.vpconfig_errorgain = volt_data->vp_errgain;
+		vp_errgain_val &= ~vdd->vp_reg.vpconfig_errorgain_mask;
+		vp_errgain_val |= vdd->vp_reg.vpconfig_errorgain <<
+				vdd->vp_reg.vpconfig_errorgain_shift;
+		vdd->write_reg(vp_errgain_val, vp_mod,
+				vdd->vp_offs.vpconfig);
+	}
+
+	return 0;
+}
+
+static void _post_volt_scale(struct omap_vdd_info *vdd,
+		unsigned long target_volt, u8 target_vsel, u8 current_vsel)
+{
+	u32 smps_steps = 0, smps_delay = 0;
+
+	smps_steps = abs(target_vsel - current_vsel);
+	/* SMPS slew rate / step size. 2us added as buffer. */
+	smps_delay = ((smps_steps * vdd->pmic_info->step_size) /
+			vdd->pmic_info->slew_rate) + 2;
+	udelay(smps_delay);
+
+	vdd->curr_volt = target_volt;
+}
+
+/* vc_bypass_scale_voltage - VC bypass method of voltage scaling */
+static int vc_bypass_scale_voltage(struct omap_vdd_info *vdd,
+		unsigned long target_volt)
+{
+	u32 loop_cnt = 0, retries_cnt = 0;
+	u32 vc_valid, vc_bypass_val_reg, vc_bypass_value;
+	u16 mod;
+	u8 target_vsel, current_vsel;
+	int ret;
+
+	ret = _pre_volt_scale(vdd, target_volt, &target_vsel, &current_vsel);
+	if (ret)
+		return ret;
+
+	mod = vdd->vc_reg.prm_mod;
+
+	vc_valid = vdd->vc_reg.valid;
+	vc_bypass_val_reg = vdd->vc_reg.bypass_val_reg;
+	vc_bypass_value = (target_vsel << vdd->vc_reg.data_shift) |
+			(vdd->pmic_info->pmic_reg <<
+			vdd->vc_reg.regaddr_shift) |
+			(vdd->pmic_info->i2c_slave_addr <<
+			vdd->vc_reg.slaveaddr_shift);
+
+	vdd->write_reg(vc_bypass_value, mod, vc_bypass_val_reg);
+	vdd->write_reg(vc_bypass_value | vc_valid, mod, vc_bypass_val_reg);
+
+	vc_bypass_value = vdd->read_reg(mod, vc_bypass_val_reg);
+	/*
+	 * Loop till the bypass command is acknowledged from the SMPS.
+	 * NOTE: This is legacy code. The loop count and retry count needs
+	 * to be revisited.
+	 */
+	while (!(vc_bypass_value & vc_valid)) {
+		loop_cnt++;
+
+		if (retries_cnt > 10) {
+			pr_warning("%s: Retry count exceeded\n", __func__);
+			return -ETIMEDOUT;
+		}
+
+		if (loop_cnt > 50) {
+			retries_cnt++;
+			loop_cnt = 0;
+			udelay(10);
+		}
+		vc_bypass_value = vdd->read_reg(mod, vc_bypass_val_reg);
+	}
+
+	_post_volt_scale(vdd, target_volt, target_vsel, current_vsel);
+	return 0;
+}
+
+/* VP force update method of voltage scaling */
+static int vp_forceupdate_scale_voltage(struct omap_vdd_info *vdd,
+		unsigned long target_volt)
+{
+	u32 vpconfig;
+	u16 mod, ocp_mod;
+	u8 target_vsel, current_vsel, prm_irqst_reg;
+	int ret, timeout = 0;
+
+	ret = _pre_volt_scale(vdd, target_volt, &target_vsel, &current_vsel);
+	if (ret)
+		return ret;
+
+	mod = vdd->vp_reg.prm_mod;
+	ocp_mod = vdd->ocp_mod;
+	prm_irqst_reg = vdd->prm_irqst_reg;
+
+	/*
+	 * Clear all pending TransactionDone interrupt/status. Typical latency
+	 * is <3us
+	 */
+	while (timeout++ < VP_TRANXDONE_TIMEOUT) {
+		vdd->write_reg(vdd->vp_reg.tranxdone_status,
+				ocp_mod, prm_irqst_reg);
+		if (!(vdd->read_reg(ocp_mod, prm_irqst_reg) &
+				vdd->vp_reg.tranxdone_status))
+				break;
+		udelay(1);
+	}
+	if (timeout >= VP_TRANXDONE_TIMEOUT) {
+		pr_warning("%s: vdd_%s TRANXDONE timeout exceeded."
+			"Voltage change aborted", __func__, vdd->voltdm.name);
+		return -ETIMEDOUT;
+	}
+
+	/* Configure for VP-Force Update */
+	vpconfig = vdd->read_reg(mod, vdd->vp_offs.vpconfig);
+	vpconfig &= ~(vdd->vp_reg.vpconfig_initvdd |
+			vdd->vp_reg.vpconfig_forceupdate |
+			vdd->vp_reg.vpconfig_initvoltage_mask);
+	vpconfig |= ((target_vsel <<
+			vdd->vp_reg.vpconfig_initvoltage_shift));
+	vdd->write_reg(vpconfig, mod, vdd->vp_offs.vpconfig);
+
+	/* Trigger initVDD value copy to voltage processor */
+	vpconfig |= vdd->vp_reg.vpconfig_initvdd;
+	vdd->write_reg(vpconfig, mod, vdd->vp_offs.vpconfig);
+
+	/* Force update of voltage */
+	vpconfig |= vdd->vp_reg.vpconfig_forceupdate;
+	vdd->write_reg(vpconfig, mod, vdd->vp_offs.vpconfig);
+
+	/*
+	 * Wait for TransactionDone. Typical latency is <200us.
+	 * Depends on SMPSWAITTIMEMIN/MAX and voltage change
+	 */
+	timeout = 0;
+	omap_test_timeout((vdd->read_reg(ocp_mod, prm_irqst_reg) &
+			vdd->vp_reg.tranxdone_status),
+			VP_TRANXDONE_TIMEOUT, timeout);
+	if (timeout >= VP_TRANXDONE_TIMEOUT)
+		pr_err("%s: vdd_%s TRANXDONE timeout exceeded."
+			"TRANXDONE never got set after the voltage update\n",
+			__func__, vdd->voltdm.name);
+
+	_post_volt_scale(vdd, target_volt, target_vsel, current_vsel);
+
+	/*
+	 * Disable TransactionDone interrupt , clear all status, clear
+	 * control registers
+	 */
+	timeout = 0;
+	while (timeout++ < VP_TRANXDONE_TIMEOUT) {
+		vdd->write_reg(vdd->vp_reg.tranxdone_status,
+				ocp_mod, prm_irqst_reg);
+		if (!(vdd->read_reg(ocp_mod, prm_irqst_reg) &
+				vdd->vp_reg.tranxdone_status))
+				break;
+		udelay(1);
+	}
+
+	if (timeout >= VP_TRANXDONE_TIMEOUT)
+		pr_warning("%s: vdd_%s TRANXDONE timeout exceeded while trying"
+			"to clear the TRANXDONE status\n",
+			__func__, vdd->voltdm.name);
+
+	vpconfig = vdd->read_reg(mod, vdd->vp_offs.vpconfig);
+	/* Clear initVDD copy trigger bit */
+	vpconfig &= ~vdd->vp_reg.vpconfig_initvdd;;
+	vdd->write_reg(vpconfig, mod, vdd->vp_offs.vpconfig);
+	/* Clear force bit */
+	vpconfig &= ~vdd->vp_reg.vpconfig_forceupdate;
+	vdd->write_reg(vpconfig, mod, vdd->vp_offs.vpconfig);
+
+	return 0;
+}
+
+/* OMAP3 specific voltage init functions */
+
+/*
+ * Intializes the voltage controller registers with the PMIC and board
+ * specific parameters and voltage setup times for OMAP3.
+ */
+static void __init omap3_vc_init(struct omap_vdd_info *vdd)
+{
+	u32 vc_val;
+	u16 mod;
+	u8 on_vsel, onlp_vsel, ret_vsel, off_vsel;
+	static bool is_initialized;
+
+	if (!vdd->pmic_info || !vdd->pmic_info->uv_to_vsel) {
+		pr_err("%s: PMIC info requried to configure vc for"
+			"vdd_%s not populated.Hence cannot initialize vc\n",
+			__func__, vdd->voltdm.name);
+		return;
+	}
+
+	if (!vdd->read_reg || !vdd->write_reg) {
+		pr_err("%s: No read/write API for accessing vdd_%s regs\n",
+			__func__, vdd->voltdm.name);
+		return;
+	}
+
+	mod = vdd->vc_reg.prm_mod;
+
+	/* Set up the SMPS_SA(i2c slave address in VC */
+	vc_val = vdd->read_reg(mod, vdd->vc_reg.smps_sa_reg);
+	vc_val &= ~vdd->vc_reg.smps_sa_mask;
+	vc_val |= vdd->pmic_info->i2c_slave_addr << vdd->vc_reg.smps_sa_shift;
+	vdd->write_reg(vc_val, mod, vdd->vc_reg.smps_sa_reg);
+
+	/* Setup the VOLRA(pmic reg addr) in VC */
+	vc_val = vdd->read_reg(mod, vdd->vc_reg.smps_volra_reg);
+	vc_val &= ~vdd->vc_reg.smps_volra_mask;
+	vc_val |= vdd->pmic_info->pmic_reg << vdd->vc_reg.smps_volra_shift;
+	vdd->write_reg(vc_val, mod, vdd->vc_reg.smps_volra_reg);
+
+	/*Configure the setup times */
+	vc_val = vdd->read_reg(mod, vdd->vc_reg.voltsetup_reg);
+	vc_val &= ~vdd->vc_reg.voltsetup_mask;
+	vc_val |= vdd->pmic_info->volt_setup_time <<
+			vdd->vc_reg.voltsetup_shift;
+	vdd->write_reg(vc_val, mod, vdd->vc_reg.voltsetup_reg);
+
+	/* Set up the on, inactive, retention and off voltage */
+	on_vsel = vdd->pmic_info->uv_to_vsel(vdd->pmic_info->on_volt);
+	onlp_vsel = vdd->pmic_info->uv_to_vsel(vdd->pmic_info->onlp_volt);
+	ret_vsel = vdd->pmic_info->uv_to_vsel(vdd->pmic_info->ret_volt);
+	off_vsel = vdd->pmic_info->uv_to_vsel(vdd->pmic_info->off_volt);
+	vc_val	= ((on_vsel << vdd->vc_reg.cmd_on_shift) |
+		(onlp_vsel << vdd->vc_reg.cmd_onlp_shift) |
+		(ret_vsel << vdd->vc_reg.cmd_ret_shift) |
+		(off_vsel << vdd->vc_reg.cmd_off_shift));
+	vdd->write_reg(vc_val, mod, vdd->vc_reg.cmdval_reg);
+
+	if (is_initialized)
+		return;
+
+	/* Generic VC parameters init */
+	vdd->write_reg(OMAP3430_CMD1_MASK | OMAP3430_RAV1_MASK, mod,
+			OMAP3_PRM_VC_CH_CONF_OFFSET);
+	vdd->write_reg(OMAP3430_MCODE_SHIFT | OMAP3430_HSEN_MASK, mod,
+			OMAP3_PRM_VC_I2C_CFG_OFFSET);
+	vdd->write_reg(OMAP3_CLKSETUP, mod, OMAP3_PRM_CLKSETUP_OFFSET);
+	vdd->write_reg(OMAP3_VOLTOFFSET, mod, OMAP3_PRM_VOLTOFFSET_OFFSET);
+	vdd->write_reg(OMAP3_VOLTSETUP2, mod, OMAP3_PRM_VOLTSETUP2_OFFSET);
+	is_initialized = true;
+}
+
+/* Sets up all the VDD related info for OMAP3 */
+static int __init omap3_vdd_data_configure(struct omap_vdd_info *vdd)
+{
+	struct clk *sys_ck;
+	u32 sys_clk_speed, timeout_val, waittime;
+
+	if (!vdd->pmic_info) {
+		pr_err("%s: PMIC info requried to configure vdd_%s not"
+			"populated.Hence cannot initialize vdd_%s\n",
+			__func__, vdd->voltdm.name, vdd->voltdm.name);
+		return -EINVAL;
+	}
+
+	if (!strcmp(vdd->voltdm.name, "mpu")) {
+		if (cpu_is_omap3630())
+			vdd->volt_data = omap36xx_vddmpu_volt_data;
+		else
+			vdd->volt_data = omap34xx_vddmpu_volt_data;
+
+		vdd->vp_reg.tranxdone_status = OMAP3430_VP1_TRANXDONE_ST_MASK;
+		vdd->vc_reg.cmdval_reg = OMAP3_PRM_VC_CMD_VAL_0_OFFSET;
+		vdd->vc_reg.smps_sa_shift = OMAP3430_PRM_VC_SMPS_SA_SA0_SHIFT;
+		vdd->vc_reg.smps_sa_mask = OMAP3430_PRM_VC_SMPS_SA_SA0_MASK;
+		vdd->vc_reg.smps_volra_shift = OMAP3430_VOLRA0_SHIFT;
+		vdd->vc_reg.smps_volra_mask = OMAP3430_VOLRA0_MASK;
+		vdd->vc_reg.voltsetup_shift = OMAP3430_SETUP_TIME1_SHIFT;
+		vdd->vc_reg.voltsetup_mask = OMAP3430_SETUP_TIME1_MASK;
+	} else if (!strcmp(vdd->voltdm.name, "core")) {
+		if (cpu_is_omap3630())
+			vdd->volt_data = omap36xx_vddcore_volt_data;
+		else
+			vdd->volt_data = omap34xx_vddcore_volt_data;
+
+		vdd->vp_reg.tranxdone_status = OMAP3430_VP2_TRANXDONE_ST_MASK;
+		vdd->vc_reg.cmdval_reg = OMAP3_PRM_VC_CMD_VAL_1_OFFSET;
+		vdd->vc_reg.smps_sa_shift = OMAP3430_PRM_VC_SMPS_SA_SA1_SHIFT;
+		vdd->vc_reg.smps_sa_mask = OMAP3430_PRM_VC_SMPS_SA_SA1_MASK;
+		vdd->vc_reg.smps_volra_shift = OMAP3430_VOLRA1_SHIFT;
+		vdd->vc_reg.smps_volra_mask = OMAP3430_VOLRA1_MASK;
+		vdd->vc_reg.voltsetup_shift = OMAP3430_SETUP_TIME2_SHIFT;
+		vdd->vc_reg.voltsetup_mask = OMAP3430_SETUP_TIME2_MASK;
+	} else {
+		pr_warning("%s: vdd_%s does not exisit in OMAP3\n",
+			__func__, vdd->voltdm.name);
+		return -EINVAL;
+	}
+
+	/*
+	 * Sys clk rate is require to calculate vp timeout value and
+	 * smpswaittimemin and smpswaittimemax.
+	 */
+	sys_ck = clk_get(NULL, "sys_ck");
+	if (IS_ERR(sys_ck)) {
+		pr_warning("%s: Could not get the sys clk to calculate"
+			"various vdd_%s params\n", __func__, vdd->voltdm.name);
+		return -EINVAL;
+	}
+	sys_clk_speed = clk_get_rate(sys_ck);
+	clk_put(sys_ck);
+	/* Divide to avoid overflow */
+	sys_clk_speed /= 1000;
+
+	/* Generic voltage parameters */
+	vdd->curr_volt = 1200000;
+	vdd->ocp_mod = OCP_MOD;
+	vdd->prm_irqst_reg = OMAP3_PRM_IRQSTATUS_MPU_OFFSET;
+	vdd->read_reg = omap3_voltage_read_reg;
+	vdd->write_reg = omap3_voltage_write_reg;
+	vdd->volt_scale = vp_forceupdate_scale_voltage;
+	vdd->vp_enabled = false;
+
+	/* VC parameters */
+	vdd->vc_reg.prm_mod = OMAP3430_GR_MOD;
+	vdd->vc_reg.smps_sa_reg = OMAP3_PRM_VC_SMPS_SA_OFFSET;
+	vdd->vc_reg.smps_volra_reg = OMAP3_PRM_VC_SMPS_VOL_RA_OFFSET;
+	vdd->vc_reg.bypass_val_reg = OMAP3_PRM_VC_BYPASS_VAL_OFFSET;
+	vdd->vc_reg.voltsetup_reg = OMAP3_PRM_VOLTSETUP1_OFFSET;
+	vdd->vc_reg.data_shift = OMAP3430_DATA_SHIFT;
+	vdd->vc_reg.slaveaddr_shift = OMAP3430_SLAVEADDR_SHIFT;
+	vdd->vc_reg.regaddr_shift = OMAP3430_REGADDR_SHIFT;
+	vdd->vc_reg.valid = OMAP3430_VALID_MASK;
+	vdd->vc_reg.cmd_on_shift = OMAP3430_VC_CMD_ON_SHIFT;
+	vdd->vc_reg.cmd_on_mask = OMAP3430_VC_CMD_ON_MASK;
+	vdd->vc_reg.cmd_onlp_shift = OMAP3430_VC_CMD_ONLP_SHIFT;
+	vdd->vc_reg.cmd_ret_shift = OMAP3430_VC_CMD_RET_SHIFT;
+	vdd->vc_reg.cmd_off_shift = OMAP3430_VC_CMD_OFF_SHIFT;
+
+	vdd->vp_reg.prm_mod = OMAP3430_GR_MOD;
+
+	/* VPCONFIG bit fields */
+	vdd->vp_reg.vpconfig_erroroffset = (vdd->pmic_info->vp_erroroffset <<
+				 OMAP3430_ERROROFFSET_SHIFT);
+	vdd->vp_reg.vpconfig_errorgain_mask = OMAP3430_ERRORGAIN_MASK;
+	vdd->vp_reg.vpconfig_errorgain_shift = OMAP3430_ERRORGAIN_SHIFT;
+	vdd->vp_reg.vpconfig_initvoltage_shift = OMAP3430_INITVOLTAGE_SHIFT;
+	vdd->vp_reg.vpconfig_initvoltage_mask = OMAP3430_INITVOLTAGE_MASK;
+	vdd->vp_reg.vpconfig_timeouten = OMAP3430_TIMEOUTEN_MASK;
+	vdd->vp_reg.vpconfig_initvdd = OMAP3430_INITVDD_MASK;
+	vdd->vp_reg.vpconfig_forceupdate = OMAP3430_FORCEUPDATE_MASK;
+	vdd->vp_reg.vpconfig_vpenable = OMAP3430_VPENABLE_MASK;
+
+	/* VSTEPMIN VSTEPMAX bit fields */
+	waittime = ((vdd->pmic_info->step_size / vdd->pmic_info->slew_rate) *
+				sys_clk_speed) / 1000;
+	vdd->vp_reg.vstepmin_smpswaittimemin = waittime;
+	vdd->vp_reg.vstepmax_smpswaittimemax = waittime;
+	vdd->vp_reg.vstepmin_stepmin = vdd->pmic_info->vp_vstepmin;
+	vdd->vp_reg.vstepmax_stepmax = vdd->pmic_info->vp_vstepmax;
+	vdd->vp_reg.vstepmin_smpswaittimemin_shift =
+				OMAP3430_SMPSWAITTIMEMIN_SHIFT;
+	vdd->vp_reg.vstepmax_smpswaittimemax_shift =
+				OMAP3430_SMPSWAITTIMEMAX_SHIFT;
+	vdd->vp_reg.vstepmin_stepmin_shift = OMAP3430_VSTEPMIN_SHIFT;
+	vdd->vp_reg.vstepmax_stepmax_shift = OMAP3430_VSTEPMAX_SHIFT;
+
+	/* VLIMITTO bit fields */
+	timeout_val = (sys_clk_speed * vdd->pmic_info->vp_timeout_us) / 1000;
+	vdd->vp_reg.vlimitto_timeout = timeout_val;
+	vdd->vp_reg.vlimitto_vddmin = vdd->pmic_info->vp_vddmin;
+	vdd->vp_reg.vlimitto_vddmax = vdd->pmic_info->vp_vddmax;
+	vdd->vp_reg.vlimitto_vddmin_shift = OMAP3430_VDDMIN_SHIFT;
+	vdd->vp_reg.vlimitto_vddmax_shift = OMAP3430_VDDMAX_SHIFT;
+	vdd->vp_reg.vlimitto_timeout_shift = OMAP3430_TIMEOUT_SHIFT;
+
+	return 0;
+}
+
+/* OMAP4 specific voltage init functions */
+static void __init omap4_vc_init(struct omap_vdd_info *vdd)
+{
+	u32 vc_val;
+	u16 mod;
+	static bool is_initialized;
+
+	if (!vdd->pmic_info || !vdd->pmic_info->uv_to_vsel) {
+		pr_err("%s: PMIC info requried to configure vc for"
+			"vdd_%s not populated.Hence cannot initialize vc\n",
+			__func__, vdd->voltdm.name);
+		return;
+	}
+
+	if (!vdd->read_reg || !vdd->write_reg) {
+		pr_err("%s: No read/write API for accessing vdd_%s regs\n",
+			__func__, vdd->voltdm.name);
+		return;
+	}
+
+	mod = vdd->vc_reg.prm_mod;
+
+	/* Set up the SMPS_SA(i2c slave address in VC */
+	vc_val = vdd->read_reg(mod, vdd->vc_reg.smps_sa_reg);
+	vc_val &= ~vdd->vc_reg.smps_sa_mask;
+	vc_val |= vdd->pmic_info->i2c_slave_addr << vdd->vc_reg.smps_sa_shift;
+	vdd->write_reg(vc_val, mod, vdd->vc_reg.smps_sa_reg);
+
+	/* Setup the VOLRA(pmic reg addr) in VC */
+	vc_val = vdd->read_reg(mod, vdd->vc_reg.smps_volra_reg);
+	vc_val &= ~vdd->vc_reg.smps_volra_mask;
+	vc_val |= vdd->pmic_info->pmic_reg << vdd->vc_reg.smps_volra_shift;
+	vdd->write_reg(vc_val, mod, vdd->vc_reg.smps_volra_reg);
+
+	/* TODO: Configure setup times and CMD_VAL values*/
+
+	if (is_initialized)
+		return;
+
+	/* Generic VC parameters init */
+	vc_val = (OMAP4430_RAV_VDD_MPU_L_MASK | OMAP4430_CMD_VDD_MPU_L_MASK |
+		OMAP4430_RAV_VDD_IVA_L_MASK | OMAP4430_CMD_VDD_IVA_L_MASK |
+		OMAP4430_RAV_VDD_CORE_L_MASK | OMAP4430_CMD_VDD_CORE_L_MASK);
+	vdd->write_reg(vc_val, mod, OMAP4_PRM_VC_CFG_CHANNEL_OFFSET);
+
+	vc_val = (0x60 << OMAP4430_SCLL_SHIFT | 0x26 << OMAP4430_SCLH_SHIFT);
+	vdd->write_reg(vc_val, mod, OMAP4_PRM_VC_CFG_I2C_CLK_OFFSET);
+
+	is_initialized = true;
+}
+
+/* Sets up all the VDD related info for OMAP4 */
+static int __init omap4_vdd_data_configure(struct omap_vdd_info *vdd)
+{
+	struct clk *sys_ck;
+	u32 sys_clk_speed, timeout_val, waittime;
+
+	if (!vdd->pmic_info) {
+		pr_err("%s: PMIC info requried to configure vdd_%s not"
+			"populated.Hence cannot initialize vdd_%s\n",
+			__func__, vdd->voltdm.name, vdd->voltdm.name);
+		return -EINVAL;
+	}
+
+	if (!strcmp(vdd->voltdm.name, "mpu")) {
+		vdd->volt_data = omap44xx_vdd_mpu_volt_data;
+		vdd->vp_reg.tranxdone_status =
+				OMAP4430_VP_MPU_TRANXDONE_ST_MASK;
+		vdd->vc_reg.cmdval_reg = OMAP4_PRM_VC_VAL_CMD_VDD_MPU_L_OFFSET;
+		vdd->vc_reg.smps_sa_shift =
+				OMAP4430_SA_VDD_MPU_L_PRM_VC_SMPS_SA_SHIFT;
+		vdd->vc_reg.smps_sa_mask =
+				OMAP4430_SA_VDD_MPU_L_PRM_VC_SMPS_SA_MASK;
+		vdd->vc_reg.smps_volra_shift = OMAP4430_VOLRA_VDD_MPU_L_SHIFT;
+		vdd->vc_reg.smps_volra_mask = OMAP4430_VOLRA_VDD_MPU_L_MASK;
+		vdd->vc_reg.voltsetup_reg =
+				OMAP4_PRM_VOLTSETUP_MPU_RET_SLEEP_OFFSET;
+		vdd->prm_irqst_reg = OMAP4_PRM_IRQSTATUS_MPU_2_OFFSET;
+	} else if (!strcmp(vdd->voltdm.name, "core")) {
+		vdd->volt_data = omap44xx_vdd_core_volt_data;
+		vdd->vp_reg.tranxdone_status =
+				OMAP4430_VP_CORE_TRANXDONE_ST_MASK;
+		vdd->vc_reg.cmdval_reg =
+				OMAP4_PRM_VC_VAL_CMD_VDD_CORE_L_OFFSET;
+		vdd->vc_reg.smps_sa_shift = OMAP4430_SA_VDD_CORE_L_0_6_SHIFT;
+		vdd->vc_reg.smps_sa_mask = OMAP4430_SA_VDD_CORE_L_0_6_MASK;
+		vdd->vc_reg.smps_volra_shift = OMAP4430_VOLRA_VDD_CORE_L_SHIFT;
+		vdd->vc_reg.smps_volra_mask = OMAP4430_VOLRA_VDD_CORE_L_MASK;
+		vdd->vc_reg.voltsetup_reg =
+				OMAP4_PRM_VOLTSETUP_CORE_RET_SLEEP_OFFSET;
+		vdd->prm_irqst_reg = OMAP4_PRM_IRQSTATUS_MPU_OFFSET;
+	} else if (!strcmp(vdd->voltdm.name, "iva")) {
+		vdd->volt_data = omap44xx_vdd_iva_volt_data;
+		vdd->vp_reg.tranxdone_status =
+				OMAP4430_VP_IVA_TRANXDONE_ST_MASK;
+		vdd->vc_reg.cmdval_reg = OMAP4_PRM_VC_VAL_CMD_VDD_IVA_L_OFFSET;
+		vdd->vc_reg.smps_sa_shift =
+				OMAP4430_SA_VDD_IVA_L_PRM_VC_SMPS_SA_SHIFT;
+		vdd->vc_reg.smps_sa_mask =
+				OMAP4430_SA_VDD_IVA_L_PRM_VC_SMPS_SA_MASK;
+		vdd->vc_reg.smps_volra_shift = OMAP4430_VOLRA_VDD_IVA_L_SHIFT;
+		vdd->vc_reg.smps_volra_mask = OMAP4430_VOLRA_VDD_IVA_L_MASK;
+		vdd->vc_reg.voltsetup_reg =
+				OMAP4_PRM_VOLTSETUP_IVA_RET_SLEEP_OFFSET;
+		vdd->prm_irqst_reg = OMAP4_PRM_IRQSTATUS_MPU_OFFSET;
+	} else {
+		pr_warning("%s: vdd_%s does not exisit in OMAP4\n",
+			__func__, vdd->voltdm.name);
+		return -EINVAL;
+	}
+
+	/*
+	 * Sys clk rate is require to calculate vp timeout value and
+	 * smpswaittimemin and smpswaittimemax.
+	 */
+	sys_ck = clk_get(NULL, "sys_clkin_ck");
+	if (IS_ERR(sys_ck)) {
+		pr_warning("%s: Could not get the sys clk to calculate"
+			"various vdd_%s params\n", __func__, vdd->voltdm.name);
+		return -EINVAL;
+	}
+	sys_clk_speed = clk_get_rate(sys_ck);
+	clk_put(sys_ck);
+	/* Divide to avoid overflow */
+	sys_clk_speed /= 1000;
+
+	/* Generic voltage parameters */
+	vdd->curr_volt = 1200000;
+	vdd->ocp_mod = OMAP4430_PRM_OCP_SOCKET_INST;
+	vdd->read_reg = omap4_voltage_read_reg;
+	vdd->write_reg = omap4_voltage_write_reg;
+	vdd->volt_scale = vp_forceupdate_scale_voltage;
+	vdd->vp_enabled = false;
+
+	/* VC parameters */
+	vdd->vc_reg.prm_mod = OMAP4430_PRM_DEVICE_INST;
+	vdd->vc_reg.smps_sa_reg = OMAP4_PRM_VC_SMPS_SA_OFFSET;
+	vdd->vc_reg.smps_volra_reg = OMAP4_PRM_VC_VAL_SMPS_RA_VOL_OFFSET;
+	vdd->vc_reg.bypass_val_reg = OMAP4_PRM_VC_VAL_BYPASS_OFFSET;
+	vdd->vc_reg.data_shift = OMAP4430_DATA_SHIFT;
+	vdd->vc_reg.slaveaddr_shift = OMAP4430_SLAVEADDR_SHIFT;
+	vdd->vc_reg.regaddr_shift = OMAP4430_REGADDR_SHIFT;
+	vdd->vc_reg.valid = OMAP4430_VALID_MASK;
+	vdd->vc_reg.cmd_on_shift = OMAP4430_ON_SHIFT;
+	vdd->vc_reg.cmd_on_mask = OMAP4430_ON_MASK;
+	vdd->vc_reg.cmd_onlp_shift = OMAP4430_ONLP_SHIFT;
+	vdd->vc_reg.cmd_ret_shift = OMAP4430_RET_SHIFT;
+	vdd->vc_reg.cmd_off_shift = OMAP4430_OFF_SHIFT;
+
+	vdd->vp_reg.prm_mod = OMAP4430_PRM_DEVICE_INST;
+
+	/* VPCONFIG bit fields */
+	vdd->vp_reg.vpconfig_erroroffset = (vdd->pmic_info->vp_erroroffset <<
+				 OMAP4430_ERROROFFSET_SHIFT);
+	vdd->vp_reg.vpconfig_errorgain_mask = OMAP4430_ERRORGAIN_MASK;
+	vdd->vp_reg.vpconfig_errorgain_shift = OMAP4430_ERRORGAIN_SHIFT;
+	vdd->vp_reg.vpconfig_initvoltage_shift = OMAP4430_INITVOLTAGE_SHIFT;
+	vdd->vp_reg.vpconfig_initvoltage_mask = OMAP4430_INITVOLTAGE_MASK;
+	vdd->vp_reg.vpconfig_timeouten = OMAP4430_TIMEOUTEN_MASK;
+	vdd->vp_reg.vpconfig_initvdd = OMAP4430_INITVDD_MASK;
+	vdd->vp_reg.vpconfig_forceupdate = OMAP4430_FORCEUPDATE_MASK;
+	vdd->vp_reg.vpconfig_vpenable = OMAP4430_VPENABLE_MASK;
+
+	/* VSTEPMIN VSTEPMAX bit fields */
+	waittime = ((vdd->pmic_info->step_size / vdd->pmic_info->slew_rate) *
+				sys_clk_speed) / 1000;
+	vdd->vp_reg.vstepmin_smpswaittimemin = waittime;
+	vdd->vp_reg.vstepmax_smpswaittimemax = waittime;
+	vdd->vp_reg.vstepmin_stepmin = vdd->pmic_info->vp_vstepmin;
+	vdd->vp_reg.vstepmax_stepmax = vdd->pmic_info->vp_vstepmax;
+	vdd->vp_reg.vstepmin_smpswaittimemin_shift =
+			OMAP4430_SMPSWAITTIMEMIN_SHIFT;
+	vdd->vp_reg.vstepmax_smpswaittimemax_shift =
+			OMAP4430_SMPSWAITTIMEMAX_SHIFT;
+	vdd->vp_reg.vstepmin_stepmin_shift = OMAP4430_VSTEPMIN_SHIFT;
+	vdd->vp_reg.vstepmax_stepmax_shift = OMAP4430_VSTEPMAX_SHIFT;
+
+	/* VLIMITTO bit fields */
+	timeout_val = (sys_clk_speed * vdd->pmic_info->vp_timeout_us) / 1000;
+	vdd->vp_reg.vlimitto_timeout = timeout_val;
+	vdd->vp_reg.vlimitto_vddmin = vdd->pmic_info->vp_vddmin;
+	vdd->vp_reg.vlimitto_vddmax = vdd->pmic_info->vp_vddmax;
+	vdd->vp_reg.vlimitto_vddmin_shift = OMAP4430_VDDMIN_SHIFT;
+	vdd->vp_reg.vlimitto_vddmax_shift = OMAP4430_VDDMAX_SHIFT;
+	vdd->vp_reg.vlimitto_timeout_shift = OMAP4430_TIMEOUT_SHIFT;
+
+	return 0;
+}
+
+/* Public functions */
+/**
+ * omap_voltage_get_nom_volt() - Gets the current non-auto-compensated voltage
+ * @voltdm:	pointer to the VDD for which current voltage info is needed
+ *
+ * API to get the current non-auto-compensated voltage for a VDD.
+ * Returns 0 in case of error else returns the current voltage for the VDD.
+ */
+unsigned long omap_voltage_get_nom_volt(struct voltagedomain *voltdm)
+{
+	struct omap_vdd_info *vdd;
+
+	if (!voltdm || IS_ERR(voltdm)) {
+		pr_warning("%s: VDD specified does not exist!\n", __func__);
+		return 0;
+	}
+
+	vdd = container_of(voltdm, struct omap_vdd_info, voltdm);
+
+	return vdd->curr_volt;
+}
+
+/**
+ * omap_vp_get_curr_volt() - API to get the current vp voltage.
+ * @voltdm:	pointer to the VDD.
+ *
+ * This API returns the current voltage for the specified voltage processor
+ */
+unsigned long omap_vp_get_curr_volt(struct voltagedomain *voltdm)
+{
+	struct omap_vdd_info *vdd;
+	u8 curr_vsel;
+
+	if (!voltdm || IS_ERR(voltdm)) {
+		pr_warning("%s: VDD specified does not exist!\n", __func__);
+		return 0;
+	}
+
+	vdd = container_of(voltdm, struct omap_vdd_info, voltdm);
+	if (!vdd->read_reg) {
+		pr_err("%s: No read API for reading vdd_%s regs\n",
+			__func__, voltdm->name);
+		return 0;
+	}
+
+	curr_vsel = vdd->read_reg(vdd->vp_reg.prm_mod,
+			vdd->vp_offs.voltage);
+
+	if (!vdd->pmic_info || !vdd->pmic_info->vsel_to_uv) {
+		pr_warning("%s: PMIC function to convert vsel to voltage"
+			"in uV not registerd\n", __func__);
+		return 0;
+	}
+
+	return vdd->pmic_info->vsel_to_uv(curr_vsel);
+}
+
+/**
+ * omap_vp_enable() - API to enable a particular VP
+ * @voltdm:	pointer to the VDD whose VP is to be enabled.
+ *
+ * This API enables a particular voltage processor. Needed by the smartreflex
+ * class drivers.
+ */
+void omap_vp_enable(struct voltagedomain *voltdm)
+{
+	struct omap_vdd_info *vdd;
+	u32 vpconfig;
+	u16 mod;
+
+	if (!voltdm || IS_ERR(voltdm)) {
+		pr_warning("%s: VDD specified does not exist!\n", __func__);
+		return;
+	}
+
+	vdd = container_of(voltdm, struct omap_vdd_info, voltdm);
+	if (!vdd->read_reg || !vdd->write_reg) {
+		pr_err("%s: No read/write API for accessing vdd_%s regs\n",
+			__func__, voltdm->name);
+		return;
+	}
+
+	mod = vdd->vp_reg.prm_mod;
+
+	/* If VP is already enabled, do nothing. Return */
+	if (vdd->vp_enabled)
+		return;
+
+	vp_latch_vsel(vdd);
+
+	/* Enable VP */
+	vpconfig = vdd->read_reg(mod, vdd->vp_offs.vpconfig);
+	vpconfig |= vdd->vp_reg.vpconfig_vpenable;
+	vdd->write_reg(vpconfig, mod, vdd->vp_offs.vpconfig);
+	vdd->vp_enabled = true;
+}
+
+/**
+ * omap_vp_disable() - API to disable a particular VP
+ * @voltdm:	pointer to the VDD whose VP is to be disabled.
+ *
+ * This API disables a particular voltage processor. Needed by the smartreflex
+ * class drivers.
+ */
+void omap_vp_disable(struct voltagedomain *voltdm)
+{
+	struct omap_vdd_info *vdd;
+	u32 vpconfig;
+	u16 mod;
+	int timeout;
+
+	if (!voltdm || IS_ERR(voltdm)) {
+		pr_warning("%s: VDD specified does not exist!\n", __func__);
+		return;
+	}
+
+	vdd = container_of(voltdm, struct omap_vdd_info, voltdm);
+	if (!vdd->read_reg || !vdd->write_reg) {
+		pr_err("%s: No read/write API for accessing vdd_%s regs\n",
+			__func__, voltdm->name);
+		return;
+	}
+
+	mod = vdd->vp_reg.prm_mod;
+
+	/* If VP is already disabled, do nothing. Return */
+	if (!vdd->vp_enabled) {
+		pr_warning("%s: Trying to disable VP for vdd_%s when"
+			"it is already disabled\n", __func__, voltdm->name);
+		return;
+	}
+
+	/* Disable VP */
+	vpconfig = vdd->read_reg(mod, vdd->vp_offs.vpconfig);
+	vpconfig &= ~vdd->vp_reg.vpconfig_vpenable;
+	vdd->write_reg(vpconfig, mod, vdd->vp_offs.vpconfig);
+
+	/*
+	 * Wait for VP idle Typical latency is <2us. Maximum latency is ~100us
+	 */
+	omap_test_timeout((vdd->read_reg(mod, vdd->vp_offs.vstatus)),
+				VP_IDLE_TIMEOUT, timeout);
+
+	if (timeout >= VP_IDLE_TIMEOUT)
+		pr_warning("%s: vdd_%s idle timedout\n",
+			__func__, voltdm->name);
+
+	vdd->vp_enabled = false;
+
+	return;
+}
+
+/**
+ * omap_voltage_scale_vdd() - API to scale voltage of a particular
+ *				voltage domain.
+ * @voltdm:	pointer to the VDD which is to be scaled.
+ * @target_volt:	The target voltage of the voltage domain
+ *
+ * This API should be called by the kernel to do the voltage scaling
+ * for a particular voltage domain during dvfs or any other situation.
+ */
+int omap_voltage_scale_vdd(struct voltagedomain *voltdm,
+		unsigned long target_volt)
+{
+	struct omap_vdd_info *vdd;
+
+	if (!voltdm || IS_ERR(voltdm)) {
+		pr_warning("%s: VDD specified does not exist!\n", __func__);
+		return -EINVAL;
+	}
+
+	vdd = container_of(voltdm, struct omap_vdd_info, voltdm);
+
+	if (!vdd->volt_scale) {
+		pr_err("%s: No voltage scale API registered for vdd_%s\n",
+			__func__, voltdm->name);
+		return -ENODATA;
+	}
+
+	return vdd->volt_scale(vdd, target_volt);
+}
+
+/**
+ * omap_voltage_reset() - Resets the voltage of a particular voltage domain
+ *			to that of the current OPP.
+ * @voltdm:	pointer to the VDD whose voltage is to be reset.
+ *
+ * This API finds out the correct voltage the voltage domain is supposed
+ * to be at and resets the voltage to that level. Should be used expecially
+ * while disabling any voltage compensation modules.
+ */
+void omap_voltage_reset(struct voltagedomain *voltdm)
+{
+	unsigned long target_uvdc;
+
+	if (!voltdm || IS_ERR(voltdm)) {
+		pr_warning("%s: VDD specified does not exist!\n", __func__);
+		return;
+	}
+
+	target_uvdc = omap_voltage_get_nom_volt(voltdm);
+	if (!target_uvdc) {
+		pr_err("%s: unable to find current voltage for vdd_%s\n",
+			__func__, voltdm->name);
+		return;
+	}
+
+	omap_voltage_scale_vdd(voltdm, target_uvdc);
+}
+
+/**
+ * omap_voltage_get_volttable() - API to get the voltage table associated with a
+ *				particular voltage domain.
+ * @voltdm:	pointer to the VDD for which the voltage table is required
+ * @volt_data:	the voltage table for the particular vdd which is to be
+ *		populated by this API
+ *
+ * This API populates the voltage table associated with a VDD into the
+ * passed parameter pointer. Returns the count of distinct voltages
+ * supported by this vdd.
+ *
+ */
+void omap_voltage_get_volttable(struct voltagedomain *voltdm,
+		struct omap_volt_data **volt_data)
+{
+	struct omap_vdd_info *vdd;
+
+	if (!voltdm || IS_ERR(voltdm)) {
+		pr_warning("%s: VDD specified does not exist!\n", __func__);
+		return;
+	}
+
+	vdd = container_of(voltdm, struct omap_vdd_info, voltdm);
+
+	*volt_data = vdd->volt_data;
+}
+
+/**
+ * omap_voltage_get_voltdata() - API to get the voltage table entry for a
+ *				particular voltage
+ * @voltdm:	pointer to the VDD whose voltage table has to be searched
+ * @volt:	the voltage to be searched in the voltage table
+ *
+ * This API searches through the voltage table for the required voltage
+ * domain and tries to find a matching entry for the passed voltage volt.
+ * If a matching entry is found volt_data is populated with that entry.
+ * This API searches only through the non-compensated voltages int the
+ * voltage table.
+ * Returns pointer to the voltage table entry corresponding to volt on
+ * sucess. Returns -ENODATA if no voltage table exisits for the passed voltage
+ * domain or if there is no matching entry.
+ */
+struct omap_volt_data *omap_voltage_get_voltdata(struct voltagedomain *voltdm,
+		unsigned long volt)
+{
+	struct omap_vdd_info *vdd;
+	int i;
+
+	if (!voltdm || IS_ERR(voltdm)) {
+		pr_warning("%s: VDD specified does not exist!\n", __func__);
+		return ERR_PTR(-EINVAL);
+	}
+
+	vdd = container_of(voltdm, struct omap_vdd_info, voltdm);
+
+	if (!vdd->volt_data) {
+		pr_warning("%s: voltage table does not exist for vdd_%s\n",
+			__func__, voltdm->name);
+		return ERR_PTR(-ENODATA);
+	}
+
+	for (i = 0; vdd->volt_data[i].volt_nominal != 0; i++) {
+		if (vdd->volt_data[i].volt_nominal == volt)
+			return &vdd->volt_data[i];
+	}
+
+	pr_notice("%s: Unable to match the current voltage with the voltage"
+		"table for vdd_%s\n", __func__, voltdm->name);
+
+	return ERR_PTR(-ENODATA);
+}
+
+/**
+ * omap_voltage_register_pmic() - API to register PMIC specific data
+ * @voltdm:	pointer to the VDD for which the PMIC specific data is
+ *		to be registered
+ * @pmic_info:	the structure containing pmic info
+ *
+ * This API is to be called by the SOC/PMIC file to specify the
+ * pmic specific info as present in omap_volt_pmic_info structure.
+ */
+int omap_voltage_register_pmic(struct voltagedomain *voltdm,
+		struct omap_volt_pmic_info *pmic_info)
+{
+	struct omap_vdd_info *vdd;
+
+	if (!voltdm || IS_ERR(voltdm)) {
+		pr_warning("%s: VDD specified does not exist!\n", __func__);
+		return -EINVAL;
+	}
+
+	vdd = container_of(voltdm, struct omap_vdd_info, voltdm);
+
+	vdd->pmic_info = pmic_info;
+
+	return 0;
+}
+
+/**
+ * omap_voltage_get_dbgdir() - API to get pointer to the debugfs directory
+ *				corresponding to a voltage domain.
+ *
+ * @voltdm:	pointer to the VDD whose debug directory is required.
+ *
+ * This API returns pointer to the debugfs directory corresponding
+ * to the voltage domain. Should be used by drivers requiring to
+ * add any debug entry for a particular voltage domain. Returns NULL
+ * in case of error.
+ */
+struct dentry *omap_voltage_get_dbgdir(struct voltagedomain *voltdm)
+{
+	struct omap_vdd_info *vdd;
+
+	if (!voltdm || IS_ERR(voltdm)) {
+		pr_warning("%s: VDD specified does not exist!\n", __func__);
+		return NULL;
+	}
+
+	vdd = container_of(voltdm, struct omap_vdd_info, voltdm);
+
+	return vdd->debug_dir;
+}
+
+/**
+ * omap_change_voltscale_method() - API to change the voltage scaling method.
+ * @voltdm:	pointer to the VDD whose voltage scaling method
+ *		has to be changed.
+ * @voltscale_method:	the method to be used for voltage scaling.
+ *
+ * This API can be used by the board files to change the method of voltage
+ * scaling between vpforceupdate and vcbypass. The parameter values are
+ * defined in voltage.h
+ */
+void omap_change_voltscale_method(struct voltagedomain *voltdm,
+		int voltscale_method)
+{
+	struct omap_vdd_info *vdd;
+
+	if (!voltdm || IS_ERR(voltdm)) {
+		pr_warning("%s: VDD specified does not exist!\n", __func__);
+		return;
+	}
+
+	vdd = container_of(voltdm, struct omap_vdd_info, voltdm);
+
+	switch (voltscale_method) {
+	case VOLTSCALE_VPFORCEUPDATE:
+		vdd->volt_scale = vp_forceupdate_scale_voltage;
+		return;
+	case VOLTSCALE_VCBYPASS:
+		vdd->volt_scale = vc_bypass_scale_voltage;
+		return;
+	default:
+		pr_warning("%s: Trying to change the method of voltage scaling"
+			"to an unsupported one!\n", __func__);
+	}
+}
+
+/**
+ * omap_voltage_domain_lookup() - API to get the voltage domain pointer
+ * @name:	Name of the voltage domain
+ *
+ * This API looks up in the global vdd_info struct for the
+ * existence of voltage domain <name>. If it exists, the API returns
+ * a pointer to the voltage domain structure corresponding to the
+ * VDD<name>. Else retuns error pointer.
+ */
+struct voltagedomain *omap_voltage_domain_lookup(char *name)
+{
+	int i;
+
+	if (!vdd_info) {
+		pr_err("%s: Voltage driver init not yet happened.Faulting!\n",
+			__func__);
+		return ERR_PTR(-EINVAL);
+	}
+
+	if (!name) {
+		pr_err("%s: No name to get the votage domain!\n", __func__);
+		return ERR_PTR(-EINVAL);
+	}
+
+	for (i = 0; i < nr_scalable_vdd; i++) {
+		if (!(strcmp(name, vdd_info[i].voltdm.name)))
+			return &vdd_info[i].voltdm;
+	}
+
+	return ERR_PTR(-EINVAL);
+}
+
+/**
+ * omap_voltage_late_init() - Init the various voltage parameters
+ *
+ * This API is to be called in the later stages of the
+ * system boot to init the voltage controller and
+ * voltage processors.
+ */
+int __init omap_voltage_late_init(void)
+{
+	int i;
+
+	if (!vdd_info) {
+		pr_err("%s: Voltage driver support not added\n",
+			__func__);
+		return -EINVAL;
+	}
+
+	voltage_dir = debugfs_create_dir("voltage", NULL);
+	if (IS_ERR(voltage_dir))
+		pr_err("%s: Unable to create voltage debugfs main dir\n",
+			__func__);
+	for (i = 0; i < nr_scalable_vdd; i++) {
+		if (vdd_data_configure(&vdd_info[i]))
+			continue;
+		vc_init(&vdd_info[i]);
+		vp_init(&vdd_info[i]);
+		vdd_debugfs_init(&vdd_info[i]);
+	}
+
+	return 0;
+}
+
+/**
+ * omap_voltage_early_init()- Volatage driver early init
+ */
+static int __init omap_voltage_early_init(void)
+{
+	if (cpu_is_omap34xx()) {
+		vdd_info = omap3_vdd_info;
+		nr_scalable_vdd = OMAP3_NR_SCALABLE_VDD;
+		vc_init = omap3_vc_init;
+		vdd_data_configure = omap3_vdd_data_configure;
+	} else if (cpu_is_omap44xx()) {
+		vdd_info = omap4_vdd_info;
+		nr_scalable_vdd = OMAP4_NR_SCALABLE_VDD;
+		vc_init = omap4_vc_init;
+		vdd_data_configure = omap4_vdd_data_configure;
+	} else {
+		pr_warning("%s: voltage driver support not added\n", __func__);
+	}
+
+	return 0;
+}
+core_initcall(omap_voltage_early_init);

arch/arm/plat-omap/Kconfig

@@ -35,6 +35,37 @@ config OMAP_DEBUG_LEDS
 	depends on OMAP_DEBUG_DEVICES
 	default y if LEDS_CLASS
 
+config OMAP_SMARTREFLEX
+	bool "SmartReflex support"
+	depends on (ARCH_OMAP3 || ARCH_OMAP4) && PM
+	help
+	  Say Y if you want to enable SmartReflex.
+
+	  SmartReflex can perform continuous dynamic voltage
+	  scaling around the nominal operating point voltage
+	  according to silicon characteristics and operating
+	  conditions. Enabling SmartReflex reduces power
+	  consumption.
+
+	  Please note, that by default SmartReflex is only
+	  initialized. To enable the automatic voltage
+	  compensation for vdd mpu  and vdd core from user space,
+	  user must write 1 to
+		/debug/voltage/vdd_<X>/smartreflex/autocomp,
+	  where X is mpu or core for OMAP3.
+	  Optionallly autocompensation can be enabled in the kernel
+	  by default during system init via the enable_on_init flag
+	  which an be passed as platform data to the smartreflex driver.
+
+config OMAP_SMARTREFLEX_CLASS3
+	bool "Class 3 mode of Smartreflex Implementation"
+	depends on OMAP_SMARTREFLEX && TWL4030_CORE
+	help
+	  Say Y to enable Class 3 implementation of Smartreflex
+
+	  Class 3 implementation of Smartreflex employs continuous hardware
+	  voltage calibration.
+
 config OMAP_RESET_CLOCKS
 	bool "Reset unused clocks during boot"
 	depends on ARCH_OMAP

arch/arm/plat-omap/include/plat/omap_hwmod.h

@@ -34,6 +34,7 @@
 #include <linux/ioport.h>
 #include <linux/spinlock.h>
 #include <plat/cpu.h>
+#include <plat/voltage.h>
 
 struct omap_device;
 
@@ -452,6 +453,8 @@ struct omap_hwmod_class {
  * @main_clk: main clock: OMAP clock name
  * @_clk: pointer to the main struct clk (filled in at runtime)
  * @opt_clks: other device clocks that drivers can request (0..*)
+ * @vdd_name: voltage domain name
+ * @voltdm: pointer to voltage domain (filled in at runtime)
  * @masters: ptr to array of OCP ifs that this hwmod can initiate on
  * @slaves: ptr to array of OCP ifs that this hwmod can respond on
  * @dev_attr: arbitrary device attributes that can be passed to the driver
@@ -494,6 +497,8 @@ struct omap_hwmod {
 	const char			*main_clk;
 	struct clk			*_clk;
 	struct omap_hwmod_opt_clk	*opt_clks;
+	char				*vdd_name;
+	struct voltagedomain		*voltdm;
 	struct omap_hwmod_ocp_if	**masters; /* connect to *_IA */
 	struct omap_hwmod_ocp_if	**slaves;  /* connect to *_TA */
 	void				*dev_attr;

arch/arm/plat-omap/include/plat/smartreflex.h

@@ -0,0 +1,245 @@
+/*
+ * OMAP Smartreflex Defines and Routines
+ *
+ * Author: Thara Gopinath	<thara@ti.com>
+ *
+ * Copyright (C) 2010 Texas Instruments, Inc.
+ * Thara Gopinath <thara@ti.com>
+ *
+ * Copyright (C) 2008 Nokia Corporation
+ * Kalle Jokiniemi
+ *
+ * Copyright (C) 2007 Texas Instruments, Inc.
+ * Lesly A M <x0080970@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARM_OMAP_SMARTREFLEX_H
+#define __ASM_ARM_OMAP_SMARTREFLEX_H
+
+#include <linux/platform_device.h>
+#include <plat/voltage.h>
+
+/*
+ * Different Smartreflex IPs version. The v1 is the 65nm version used in
+ * OMAP3430. The v2 is the update for the 45nm version of the IP
+ * used in OMAP3630 and OMAP4430
+ */
+#define SR_TYPE_V1	1
+#define SR_TYPE_V2	2
+
+/* SMART REFLEX REG ADDRESS OFFSET */
+#define SRCONFIG		0x00
+#define SRSTATUS		0x04
+#define SENVAL			0x08
+#define SENMIN			0x0C
+#define SENMAX			0x10
+#define SENAVG			0x14
+#define AVGWEIGHT		0x18
+#define NVALUERECIPROCAL	0x1c
+#define SENERROR_V1		0x20
+#define ERRCONFIG_V1		0x24
+#define IRQ_EOI			0x20
+#define IRQSTATUS_RAW		0x24
+#define IRQSTATUS		0x28
+#define IRQENABLE_SET		0x2C
+#define IRQENABLE_CLR		0x30
+#define SENERROR_V2		0x34
+#define ERRCONFIG_V2		0x38
+
+/* Bit/Shift Positions */
+
+/* SRCONFIG */
+#define SRCONFIG_ACCUMDATA_SHIFT	22
+#define SRCONFIG_SRCLKLENGTH_SHIFT	12
+#define SRCONFIG_SENNENABLE_V1_SHIFT	5
+#define SRCONFIG_SENPENABLE_V1_SHIFT	3
+#define SRCONFIG_SENNENABLE_V2_SHIFT	1
+#define SRCONFIG_SENPENABLE_V2_SHIFT	0
+#define SRCONFIG_CLKCTRL_SHIFT		0
+
+#define SRCONFIG_ACCUMDATA_MASK		(0x3ff << 22)
+
+#define SRCONFIG_SRENABLE		BIT(11)
+#define SRCONFIG_SENENABLE		BIT(10)
+#define SRCONFIG_ERRGEN_EN		BIT(9)
+#define SRCONFIG_MINMAXAVG_EN		BIT(8)
+#define SRCONFIG_DELAYCTRL		BIT(2)
+
+/* AVGWEIGHT */
+#define AVGWEIGHT_SENPAVGWEIGHT_SHIFT	2
+#define AVGWEIGHT_SENNAVGWEIGHT_SHIFT	0
+
+/* NVALUERECIPROCAL */
+#define NVALUERECIPROCAL_SENPGAIN_SHIFT	20
+#define NVALUERECIPROCAL_SENNGAIN_SHIFT	16
+#define NVALUERECIPROCAL_RNSENP_SHIFT	8
+#define NVALUERECIPROCAL_RNSENN_SHIFT	0
+
+/* ERRCONFIG */
+#define ERRCONFIG_ERRWEIGHT_SHIFT	16
+#define ERRCONFIG_ERRMAXLIMIT_SHIFT	8
+#define ERRCONFIG_ERRMINLIMIT_SHIFT	0
+
+#define SR_ERRWEIGHT_MASK		(0x07 << 16)
+#define SR_ERRMAXLIMIT_MASK		(0xff << 8)
+#define SR_ERRMINLIMIT_MASK		(0xff << 0)
+
+#define ERRCONFIG_VPBOUNDINTEN_V1	BIT(31)
+#define ERRCONFIG_VPBOUNDINTST_V1	BIT(30)
+#define	ERRCONFIG_MCUACCUMINTEN		BIT(29)
+#define ERRCONFIG_MCUACCUMINTST		BIT(28)
+#define	ERRCONFIG_MCUVALIDINTEN		BIT(27)
+#define ERRCONFIG_MCUVALIDINTST		BIT(26)
+#define ERRCONFIG_MCUBOUNDINTEN		BIT(25)
+#define	ERRCONFIG_MCUBOUNDINTST		BIT(24)
+#define	ERRCONFIG_MCUDISACKINTEN	BIT(23)
+#define ERRCONFIG_VPBOUNDINTST_V2	BIT(23)
+#define ERRCONFIG_MCUDISACKINTST	BIT(22)
+#define ERRCONFIG_VPBOUNDINTEN_V2	BIT(22)
+
+#define ERRCONFIG_STATUS_V1_MASK	(ERRCONFIG_VPBOUNDINTST_V1 | \
+					ERRCONFIG_MCUACCUMINTST | \
+					ERRCONFIG_MCUVALIDINTST | \
+					ERRCONFIG_MCUBOUNDINTST | \
+					ERRCONFIG_MCUDISACKINTST)
+/* IRQSTATUS */
+#define IRQSTATUS_MCUACCUMINT		BIT(3)
+#define IRQSTATUS_MCVALIDINT		BIT(2)
+#define IRQSTATUS_MCBOUNDSINT		BIT(1)
+#define IRQSTATUS_MCUDISABLEACKINT	BIT(0)
+
+/* IRQENABLE_SET and IRQENABLE_CLEAR */
+#define IRQENABLE_MCUACCUMINT		BIT(3)
+#define IRQENABLE_MCUVALIDINT		BIT(2)
+#define IRQENABLE_MCUBOUNDSINT		BIT(1)
+#define IRQENABLE_MCUDISABLEACKINT	BIT(0)
+
+/* Common Bit values */
+
+#define SRCLKLENGTH_12MHZ_SYSCLK	0x3c
+#define SRCLKLENGTH_13MHZ_SYSCLK	0x41
+#define SRCLKLENGTH_19MHZ_SYSCLK	0x60
+#define SRCLKLENGTH_26MHZ_SYSCLK	0x82
+#define SRCLKLENGTH_38MHZ_SYSCLK	0xC0
+
+/*
+ * 3430 specific values. Maybe these should be passed from board file or
+ * pmic structures.
+ */
+#define OMAP3430_SR_ACCUMDATA		0x1f4
+
+#define OMAP3430_SR1_SENPAVGWEIGHT	0x03
+#define OMAP3430_SR1_SENNAVGWEIGHT	0x03
+
+#define OMAP3430_SR2_SENPAVGWEIGHT	0x01
+#define OMAP3430_SR2_SENNAVGWEIGHT	0x01
+
+#define OMAP3430_SR_ERRWEIGHT		0x04
+#define OMAP3430_SR_ERRMAXLIMIT		0x02
+
+/**
+ * struct omap_sr_pmic_data - Strucutre to be populated by pmic code to pass
+ *				pmic specific info to smartreflex driver
+ *
+ * @sr_pmic_init:	API to initialize smartreflex on the PMIC side.
+ */
+struct omap_sr_pmic_data {
+	void (*sr_pmic_init) (void);
+};
+
+#ifdef CONFIG_OMAP_SMARTREFLEX
+/*
+ * The smart reflex driver supports CLASS1 CLASS2 and CLASS3 SR.
+ * The smartreflex class driver should pass the class type.
+ * Should be used to populate the class_type field of the
+ * omap_smartreflex_class_data structure.
+ */
+#define SR_CLASS1	0x1
+#define SR_CLASS2	0x2
+#define SR_CLASS3	0x3
+
+/**
+ * struct omap_sr_class_data - Smartreflex class driver info
+ *
+ * @enable:		API to enable a particular class smaartreflex.
+ * @disable:		API to disable a particular class smartreflex.
+ * @configure:		API to configure a particular class smartreflex.
+ * @notify:		API to notify the class driver about an event in SR.
+ *			Not needed for class3.
+ * @notify_flags:	specify the events to be notified to the class driver
+ * @class_type:		specify which smartreflex class.
+ *			Can be used by the SR driver to take any class
+ *			based decisions.
+ */
+struct omap_sr_class_data {
+	int (*enable)(struct voltagedomain *voltdm);
+	int (*disable)(struct voltagedomain *voltdm, int is_volt_reset);
+	int (*configure)(struct voltagedomain *voltdm);
+	int (*notify)(struct voltagedomain *voltdm, u32 status);
+	u8 notify_flags;
+	u8 class_type;
+};
+
+/**
+ * struct omap_sr_nvalue_table	- Smartreflex n-target value info
+ *
+ * @efuse_offs:	The offset of the efuse where n-target values are stored.
+ * @nvalue:	The n-target value.
+ */
+struct omap_sr_nvalue_table {
+	u32 efuse_offs;
+	u32 nvalue;
+};
+
+/**
+ * struct omap_sr_data - Smartreflex platform data.
+ *
+ * @ip_type:		Smartreflex IP type.
+ * @senp_mod:		SENPENABLE value for the sr
+ * @senn_mod:		SENNENABLE value for sr
+ * @nvalue_count:	Number of distinct nvalues in the nvalue table
+ * @enable_on_init:	whether this sr module needs to enabled at
+ *			boot up or not.
+ * @nvalue_table:	table containing the  efuse offsets and nvalues
+ *			corresponding to them.
+ * @voltdm:		Pointer to the voltage domain associated with the SR
+ */
+struct omap_sr_data {
+	int				ip_type;
+	u32				senp_mod;
+	u32				senn_mod;
+	int				nvalue_count;
+	bool				enable_on_init;
+	struct omap_sr_nvalue_table	*nvalue_table;
+	struct voltagedomain		*voltdm;
+};
+
+/* Smartreflex module enable/disable interface */
+void omap_sr_enable(struct voltagedomain *voltdm);
+void omap_sr_disable(struct voltagedomain *voltdm);
+void omap_sr_disable_reset_volt(struct voltagedomain *voltdm);
+
+/* API to register the pmic specific data with the smartreflex driver. */
+void omap_sr_register_pmic(struct omap_sr_pmic_data *pmic_data);
+
+/* Smartreflex driver hooks to be called from Smartreflex class driver */
+int sr_enable(struct voltagedomain *voltdm, unsigned long volt);
+void sr_disable(struct voltagedomain *voltdm);
+int sr_configure_errgen(struct voltagedomain *voltdm);
+int sr_configure_minmax(struct voltagedomain *voltdm);
+
+/* API to register the smartreflex class driver with the smartreflex driver */
+int sr_register_class(struct omap_sr_class_data *class_data);
+#else
+static inline void omap_sr_enable(struct voltagedomain *voltdm) {}
+static inline void omap_sr_disable(struct voltagedomain *voltdm) {}
+static inline void omap_sr_disable_reset_volt(
+		struct voltagedomain *voltdm) {}
+static inline void omap_sr_register_pmic(
+		struct omap_sr_pmic_data *pmic_data) {}
+#endif
+#endif

arch/arm/plat-omap/include/plat/voltage.h

@@ -0,0 +1,146 @@
+/*
+ * OMAP Voltage Management Routines
+ *
+ * Author: Thara Gopinath	<thara@ti.com>
+ *
+ * Copyright (C) 2009 Texas Instruments, Inc.
+ * Thara Gopinath <thara@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ARCH_ARM_MACH_OMAP2_VOLTAGE_H
+#define __ARCH_ARM_MACH_OMAP2_VOLTAGE_H
+
+#define VOLTSCALE_VPFORCEUPDATE		1
+#define VOLTSCALE_VCBYPASS		2
+
+/*
+ * OMAP3 GENERIC setup times. Revisit to see if these needs to be
+ * passed from board or PMIC file
+ */
+#define OMAP3_CLKSETUP		0xff
+#define OMAP3_VOLTOFFSET	0xff
+#define OMAP3_VOLTSETUP2	0xff
+
+/* Voltage value defines */
+#define OMAP3430_VDD_MPU_OPP1_UV		975000
+#define OMAP3430_VDD_MPU_OPP2_UV		1075000
+#define OMAP3430_VDD_MPU_OPP3_UV		1200000
+#define OMAP3430_VDD_MPU_OPP4_UV		1270000
+#define OMAP3430_VDD_MPU_OPP5_UV		1350000
+
+#define OMAP3430_VDD_CORE_OPP1_UV		975000
+#define OMAP3430_VDD_CORE_OPP2_UV		1050000
+#define OMAP3430_VDD_CORE_OPP3_UV		1150000
+
+#define OMAP3630_VDD_MPU_OPP50_UV		1012500
+#define OMAP3630_VDD_MPU_OPP100_UV		1200000
+#define OMAP3630_VDD_MPU_OPP120_UV		1325000
+#define OMAP3630_VDD_MPU_OPP1G_UV		1375000
+
+#define OMAP3630_VDD_CORE_OPP50_UV		1000000
+#define OMAP3630_VDD_CORE_OPP100_UV		1200000
+
+#define OMAP4430_VDD_MPU_OPP50_UV		930000
+#define OMAP4430_VDD_MPU_OPP100_UV		1100000
+#define OMAP4430_VDD_MPU_OPPTURBO_UV		1260000
+#define OMAP4430_VDD_MPU_OPPNITRO_UV		1350000
+
+#define OMAP4430_VDD_IVA_OPP50_UV		930000
+#define OMAP4430_VDD_IVA_OPP100_UV		1100000
+#define OMAP4430_VDD_IVA_OPPTURBO_UV		1260000
+
+#define OMAP4430_VDD_CORE_OPP50_UV		930000
+#define OMAP4430_VDD_CORE_OPP100_UV		1100000
+
+/**
+ * struct voltagedomain - omap voltage domain global structure.
+ * @name:	Name of the voltage domain which can be used as a unique
+ *		identifier.
+ */
+struct voltagedomain {
+	char *name;
+};
+
+/* API to get the voltagedomain pointer */
+struct voltagedomain *omap_voltage_domain_lookup(char *name);
+
+/**
+ * struct omap_volt_data - Omap voltage specific data.
+ * @voltage_nominal:	The possible voltage value in uV
+ * @sr_efuse_offs:	The offset of the efuse register(from system
+ *			control module base address) from where to read
+ *			the n-target value for the smartreflex module.
+ * @sr_errminlimit:	Error min limit value for smartreflex. This value
+ *			differs at differnet opp and thus is linked
+ *			with voltage.
+ * @vp_errorgain:	Error gain value for the voltage processor. This
+ *			field also differs according to the voltage/opp.
+ */
+struct omap_volt_data {
+	u32	volt_nominal;
+	u32	sr_efuse_offs;
+	u8	sr_errminlimit;
+	u8	vp_errgain;
+};
+
+/**
+ * struct omap_volt_pmic_info - PMIC specific data required by voltage driver.
+ * @slew_rate:	PMIC slew rate (in uv/us)
+ * @step_size:	PMIC voltage step size (in uv)
+ * @vsel_to_uv:	PMIC API to convert vsel value to actual voltage in uV.
+ * @uv_to_vsel:	PMIC API to convert voltage in uV to vsel value.
+ */
+struct omap_volt_pmic_info {
+	int slew_rate;
+	int step_size;
+	u32 on_volt;
+	u32 onlp_volt;
+	u32 ret_volt;
+	u32 off_volt;
+	u16 volt_setup_time;
+	u8 vp_erroroffset;
+	u8 vp_vstepmin;
+	u8 vp_vstepmax;
+	u8 vp_vddmin;
+	u8 vp_vddmax;
+	u8 vp_timeout_us;
+	u8 i2c_slave_addr;
+	u8 pmic_reg;
+	unsigned long (*vsel_to_uv) (const u8 vsel);
+	u8 (*uv_to_vsel) (unsigned long uV);
+};
+
+unsigned long omap_vp_get_curr_volt(struct voltagedomain *voltdm);
+void omap_vp_enable(struct voltagedomain *voltdm);
+void omap_vp_disable(struct voltagedomain *voltdm);
+int omap_voltage_scale_vdd(struct voltagedomain *voltdm,
+		unsigned long target_volt);
+void omap_voltage_reset(struct voltagedomain *voltdm);
+void omap_voltage_get_volttable(struct voltagedomain *voltdm,
+		struct omap_volt_data **volt_data);
+struct omap_volt_data *omap_voltage_get_voltdata(struct voltagedomain *voltdm,
+		unsigned long volt);
+unsigned long omap_voltage_get_nom_volt(struct voltagedomain *voltdm);
+struct dentry *omap_voltage_get_dbgdir(struct voltagedomain *voltdm);
+#ifdef CONFIG_PM
+int omap_voltage_register_pmic(struct voltagedomain *voltdm,
+		struct omap_volt_pmic_info *pmic_info);
+void omap_change_voltscale_method(struct voltagedomain *voltdm,
+		int voltscale_method);
+int omap_voltage_late_init(void);
+#else
+static inline int omap_voltage_register_pmic(struct voltagedomain *voltdm,
+		struct omap_volt_pmic_info *pmic_info) {}
+static inline  void omap_change_voltscale_method(struct voltagedomain *voltdm,
+		int voltscale_method) {}
+static inline int omap_voltage_late_init(void)
+{
+	return -EINVAL;
+}
+#endif
+
+#endif